Sliding Anchors - WT75 - Stainless steel sliding anchor restraint slip ties.
Specification Data Sheet (F30)
Project:
Wincro Metal Industries Ltd manufacture a wide range of corrosion resistant fixings, produced using
high quality grade 1.4301 (304) stainless steel. Grade 1.4401 (316) stainless steel can be specified for
use in corrosive environments. The range is designed to satisfy most standard masonry to masonry,
masonry to concrete and masonry to steel work applications.
Wincro’s Technical Design Team are available to discuss and produce bespoke ties to customer
specific requirements. Wincro can also provide a design and specification service and it is
recommended that they are consulted early in the design process.
Type:
Sliding Brick Anchors
Description:
Wincro sliding brick anchors are designed to accommodate vertical movement
and are supplied with one way and/or two way ties to provide a mechanical tie
between masonry cladding and the structure.
Available in three lengths and various head details with 12mm diameter fixing
holes as standard. Specials available on request.
The stems are designed to fit within the cavity and take ties that will slide up and
down to allow for vertical movement. Designed to resist wind loads of up to
1.5kN.
Wincro WT75CHT Sliding Anchors
Restraint for the head of a cavity wall. The stem fits within the cavity and will
accept either WT75T1 or WT75T2 ties. The WT75CHT an offset stem and a
single 12 mm hole to allow fixing to the face of the structure.
Wincro WT75BHT sliding anchors
Restraint for the head of a cavity wall. The stem fits within the cavity and will
accept either WT75T1 or WT75T2 ties. The WT75BHT has an offset stem and a
single 12 mm hole to allow fixing to the underside of a structural member.
Wincro WT75B sliding anchors
Restraint for the head of a cavity wall. The stem fits within the cavity and will
accept either WT75T1 or WT75T2 ties. The WT75B has a single 12 mm hole to
allow fixing to the underside of a structural member.
Wincro WT7EO sliding anchors
Restraint for the head of a cavity wall. The stem fits within the cavity and will
accept either WT75T1 or WT75T2 ties. The WT75EO has a single 12 mm hole
to allow fixing to the face of the structure.
Wincro WT75L sliding anchors
Restraint for the head of a cavity wall. The stem fits within the cavity and will
accept either WT75T1 or WT75T2 ties. The WT75L has an offset stem and two
12 mm holes to allow fixing to the underside of a structural member.
Wincro WT75T sliding anchors
Restraint for the head of a cavity wall. The stem fits within the cavity and will
accept either WT75T1 or WT75T2 ties. The WT75T has two 12 mm holes in line
with the stem to allow fixing to the underside of a structural member.
Wincro WT75C sliding anchors
Restraint for the head of a cavity wall. The stem fits within the cavity and will
accept either WT75T1 or WT75T2 ties. The WT75C has two12mm holes at ri
Consult with Wincro technical literature for details.
Manufacturer: Wincro Metal Industries Ltd. Wincobank Works, Fife Street, Sheffield, S9 1NJ. Tel:
0114 242 2171. Fax: 0114 243 4306.
Email: sales@wincro.com Web: www.wincro.com
Product
reference:
Material:
Sliding Brick Anchors:
Wincro WT75 CHT Sliding Brick Anchor– Cranked half twist.
Wincro WT75BHT Sliding Brick Anchor – Bent half twist.
Wincro WT75B Sliding Brick Anchor – Bent.
Wincro WT75EO Sliding Brick Anchor - Extended side fixing.
Wincro WT75L Sliding Brick Anchor – Top fixed offset.
Wincro WT75T Sliding Brick Anchor – Longitudinal top fixing central
Wincro WT75C Sliding Brick Anchor – Top fixing central.
Wincro WT75EHT Sliding Brick Anchor – End half twist
Wincro WT75E Sliding Brick Anchor - Side fixing.
Ties:
Wincro WT75T1 –Sliding Brick Anchor One way tie.
Wincro WT75T2 – Sliding Brick Anchor Two way tie.
Grade 1.4301 (304) Stainless Steel.
Images:
WT75CHT
WT75BHT
WT75B
WT75T2
WT75EO
WT75L
WT75T1
Sizes:
Sliding Brick Anchors:
WT75, WT75BHT, WT75B, WT75EO, WT75L, WT75T, WT75C, WT75EHT,
WT75E
- 350mm, 450mm, 600mm Stem
Ties: WT75T1 –Sliding Brick Anchor One way tie.
- 100mm, 125mm, 150mm. 175mm, 200mm
Ties: WT75T2 –Sliding Brick Anchor Two way tie.
- 200mm, 225mm, 250mm, 275mm, 300mm
Accessories:
WBXSM10 – M10 Xylan coated setscrew complete with neoprene isolation
washer.
WIP75 - Neoprene isolating patch for fixing to steelwork.
WBEBM10 – M10 Expansion bolt for fixing to concrete.