Eco-Reinforcement Application
Form
Certification Scheme For Responsible Sourcing of
Reinforcing Steel Products
Doc No: ECOR03
Revision
0
No:
Date: 30/6/10
Page: Page 1 of 5
Please complete all aspects of this form and return it with any additional information requested to:
Derek Hughes, Eco-Reinforcement Secretariat, BRE Global, Garston, Watford WD25 9XX
Note: This document is owned by Eco-Reinforcement Ltd and forms part of the certification scheme
against the Eco-Reinforcement scheme. The Eco-Reinforcement scheme is owned and managed by EcoReinforcement Ltd.
Company Details
Company Registered Name
Company Trading Name
(if different)
Company Trading Address
Postcode
Type of company
Please tick as appropriate
Limited Company 
PLC 
Partnership 
Contact Name & Position
Telephone
Fax
E-mail
Name of Managing Director
or Partners
Company Registration
Number
Address of Head office or
Registered office
(if different from above)
Uncontrolled copy if printed.
Valid on day of printing only.
Printed on:27 January 2011
© Eco-Reinforcement Ltd 2010
Eco-Reinforcement Application
Form
Certification Scheme For Responsible Sourcing of
Reinforcing Steel Products
Doc No: ECOR03
Revision
0
No:
Date: 30/6/10
Page: Page 2 of 5
Scope of Certification Application
Scope of application
Entire Company 
Specific site(s) 
Please list below the products and relevant manufacturing facilities to be included under the assessment.
If required, please continue on additional sheets:
Product/Product Group to be assessed
Uncontrolled copy if printed.
Valid on day of printing only.
Address(es) of manufacturing facility(ies) to be
assessed
Printed on:27 January 2011
© Eco-Reinforcement Ltd 2010
Eco-Reinforcement Application
Form
Certification Scheme For Responsible Sourcing of
Reinforcing Steel Products
Doc No: ECOR03
Revision
0
No:
Date: 30/6/10
Page: Page 3 of 5
Supply Chain Details
Please provide a diagram
explaining the size and scope
of your product(s) supply
chain from raw material to
end of life, including locations
of suppliers, percentages of
different constituent materials
etc:
If you have indicated that a
product to be assessed falls
within a product group,
please provide justification
(for example, similarities in
constituent material
composition, supply chain,
production process etc):
Uncontrolled copy if printed.
Valid on day of printing only.
Printed on:27 January 2011
© Eco-Reinforcement Ltd 2010
Doc No: ECOR03
Revision
0
No:
Date: 30/6/10
Eco-Reinforcement Application
Form
Certification Scheme For Responsible Sourcing of
Reinforcing Steel Products
Page: Page 4 of 5
Assessment Levels
Please tick the boxes below for each clause of the Eco-Reinforcement standard to indicate what level you
will be aiming to achieve during the assessment process. This will allow BRE Global to more accurately
cost your proposal and will also act as a checklist to ensure that all compulsory requirements will be met:
Eco-Reinforcement Clause
Level Organisation Aiming to Achieve
3.2.1 Responsible Sourcing
Policy
3.2.2 Legal Compliance
Compulsory 
3.2.3 Quality Management
System
3.2.4 Supplier Management
System
3.3.1 Material Traceability
Through the Supply Chain
3.3.2 Environmental
Management Systems in the
Supply Chain
3.3.3 Health and Safety
Management Systems in the
Supply Chain
3.4.2 Greenhouse Gas
Emissions
Compulsory 1 
Compulsory 
Compulsory 
Compulsory 
1
2  (Compulsory for
fabricators)
3
Compulsory 
1
2
Compulsory 
1
2
3
Compulsory 1 
Compulsory 3 
5
7
3.4.3 Resource Use
Compulsory 1 
3
5
7
3.4.4 Waste Management
Compulsory 1 
Compulsory 2 
3
4
3.4.5 Water Extraction
2
3
4
3.4.6 Life Cycle Assessment
1  (Compulsory
for mills)
2
3.4.7 Transport Impacts
1
2
3
4
3.4.8 Employment and Skills
Compulsory 1 
2
3
4
3.4.9 Local Communities
Compulsory 1 
2
3
4
Uncontrolled copy if printed.
Valid on day of printing only.
4
Printed on:27 January 2011
5
© Eco-Reinforcement Ltd 2010
Eco-Reinforcement Application
Form
Certification Scheme For Responsible Sourcing of
Reinforcing Steel Products
Doc No: ECOR03
Revision
0
No:
Date: 30/6/10
Page: Page 5 of 5
Application Fees
Please include a cheque for the relevant application fee with this application form. If applying for more than
100 sites and/or 30 product ranges, please contact BRE Global for a bespoke fee. Please tick below to
confirm the fee level provided:
Up to 5 sites and/or 5 product ranges - £350

Up to 25 sites and/or 10 product ranges - £700

Up to 50 sites and/or 15 product ranges - £950

Up to 75 sites and/or 25 product ranges - £1150

Up to 100 sites and/or 30 product ranges - £1300

IMPORTANT NOTE – In addition to BRE Global’s certification application fee, an Eco-Reinforcement Ltd
application fee and annual subscription fee also applies. Please see www.eco-reinforcement.org for more
details.
VAT – All fees given are exclusive of VAT which will be charged at the prevailing rate.
Company Declaration
Authorised representative of Company:
I hereby confirm on behalf of…………………………….. (the Company), that the information contained in
this document is correct, any changes in circumstances will be notified to BRE Global in writing, and we
accept and agree to abide by the following documents:
a)
b)
c)
d)
e)
f)
g)
Eco-Reinforcement Standard for the Responsible Sourcing of Reinforcing Steel Products
Scheme Document SD 195
Complaints & Appeals document PN 100
Terms & Conditions' document PN 101
Use of the BRE Certification Mark PN103
Fee Sheet FS 053
Change of details, document PN 159
Name:
Position:
Signature:
Date
Uncontrolled copy if printed.
Valid on day of printing only.
Printed on:27 January 2011
© Eco-Reinforcement Ltd 2010