BOSCH PAVIRO - PVA-15CST Call Station Architects’ and Engineers’ Specifications The call station shall be an EN54-16 compliant and certified user interface. It shall be designed in a modern and robust chassis with a graphical display. As standard, the call station shall have a gooseneck microphone with pop shield and permanent monitoring, an illuminated LC-display and an integrated loudspeaker to be used for system sounds. The operation status shall be permanently supervised by the system controller. It shall be possible to modify the call station to suit the user’s requirements by connecting up to five remote call station keypads, each with 20 free customizable functions and selection buttons. It shall be possible to extend the call station at the right and at the left side. Is shall be possible to mount a maximum of 3 additional emergency buttons on the call station. Optionally it shall be possible to mount a key switch to lock or enable call station functions with a key switch or to give access to a second access level. The call station shall have a built-in numerical keypad; it shall be possible to enable or disable the keypad during configuration. The call station shall have the following specifications: Five menu/function keys (pre-programmed) – four buttons shall provide each 1 LED (2 LEDs shall be green and 2 LEDs shall be yellow). Green led on the microphone which is active during a call. 15 function and speed dial buttons (customizable), two LEDs (green/red) per button. Button functions shall be programmable such as: o Zone select, source select, level control, emergency on/off, message on/off, failure acknowledge/reset. o Switching output trigger on/off or 0 to 10V, select scheduled events, scheduled event on/off. Fascia cover with transparent areas for customizable labels. Multilanguage LCD display informs about system status, system faults, selected zones, source select, clock, different kind of additional (failure) messages shall be free configurable. Supervised electret microphone, with limiter and a speech filter for excellent speech intelligibility. CAT5 cable for data and audio connection to controller (CAN bus, up to 1000 meter). It shall be possible to daisy chain 4 call stations. It shall receive audio and operational control signals from the controller and report its status to the system controller. Internal monitoring with error logging – complying with all relevant national and international standards. Technical data CAN BUS port 10, 20, or 62.5 kbit/s, 1 ✕ RJ-45, max. length 1000 m Maximum mic input level -21 dBu Maximum line input level +4 dBu Maximum NF output level +12 dBu Buttons 5 pre-programmed, 15 programmable zone/function keys Color RAL 9017 (traffic black) Indicator lights Power (green), Fault (yellow), Alarm (red) Green or yellow LED per preprogrammed menu button Green and red LED per programmable zone/function key LC display Back-lit LC display (122 ✕ 32 pixel) Ports 1 CST BUS port (Control data + Audio + Power supply, RJ-45) 1 audio source (line level, phone jack) 1 microphone port (phone jack) 1 EXT OUT port (call station extension, RJ-12) DC power input 15–58 V Maximum supply current Standby/Idle/Announcement/ (without call station Alert: 24 V / 80 mA / 1.92 W extensions) Maximum supply current (with Standby/Idle/Announcement/ 5 call station extensions) Alert: 24 V / 190 mA / 4.56 W Operating temperature -5 °C to 45 °C Electromagnetic environment E1, E2, E3 Product dimensions (Width ✕ 200 ✕ 166 ✕ 66 mm (without Height ✕ Depth) microphone) Net weight 0.6 kg Shipping weight 1.1 kg Supply current: PVA-15CST PVA-1EB PVA-1KS PVA-20CSE Standby 60 mA 0 mA 0 mA 0 mA Idle (no 80 mA 0 mA 0 mA 15 mA 80 mA 8 mA 0 mA 15 mA 80 mA 8 mA 0 mA 15 mA audio) Announcem ent mode (-10 dB) Alert (alarm) mode (-3 dB) Standards: – IEC 60065 – EN 61000-6-3 – EN 50130-4