Florida’s Energy Code
2007 Florida Building Code-Including
2007 Energy Glitch Amendments
Effective March 1st, 2009
Chapter 13-415
Commercial Lighting Compliance
Allen M. Weiss, PE, LC (aweiss@sescolighting.com)
SESCO Lighting
1133 W. Morse Blvd.
Winter Park Florida 32789
407-629-6100
www.sescolighting.com
Florida Energy Code
1
SESCO Lighting is a registered Provider with The American Institute of
Architects Continuing Education Systems. Credit earned on completion of
this program will be reported to CES records for AIA members. Certificates of
Completion for non-AIA are available on request.
This program is registered with the AIA/CES for continuing professional
education. As such, it does not include content that may be deemed or
construed to be an approval or endorsement by the AIA of any material of
construction or any method or manner of handling, using, distributing, or
dealing in any material or product. Questions related to specific materials,
methods, and services will be addressed at the conclusion of this
presentation.
Florida Energy Code
2
SESCO Lighting is a registered Provider with DBPR, the Florida
Department of Business and Professional Regulations. Continuing
Education Credit earned on completion of this program will be reported to
DBPR records for Registered Landscape Architects, Registered
Architects, Registered Interior Designers, and licensed Electrical
Contractors. Certificates of Completion will be provided for all in
attendance for the entire seminar.
This program is registered with DBPR for continuing professional
education. As such, it does not include content that may be deemed or
construed to be an approval or endorsement by the DBPR of any material
of construction or any method or manner of handling, using, distributing,
or dealing in any material or product. Questions related to specific
materials, methods, and services will be addressed at the conclusion of
this presentation.
Florida Energy Code
3
Allen M. Weiss P.E, LC is approved and authorized as a Continuing
Education Provider by the Florida Board of Professional Engineers
(# 0003992), offering “Area of Practice” courses.
In addition, Mr. Weiss is an employee of the Sesco Lighting Company
and is offering this lecture to both the attendees and to Sesco Lighting
on a “Pro-Bono” basis.
Every attempt has been made to keep this lecture completely generic.
At no time during this lecture will products represented by Sesco
Lighting be discussed, either by manufacturer’s name, product name
or product part number.
Florida Energy Code
4
Learning Objectives
Students will;
•Obtain a working knowledge of Chapter 13 of the Florida Building Code.
• Compare and evaluate power limiting (watts/sq.ft) requirements
pertaining to new, renovated and existing commercial building lighting.
•Compare and evaluate control requirements pertaining to new, renovated
and existing commercial building lighting.
•Identify and differentiate between indoor and outdoor lighting energy
related requirements.
Florida Energy Code
5
History of the Code
 In 2001 the Energy Conservation and Protection Act mandated that all
states adopt a commercial energy code (ASHRAE 90.1-1999 or something
more stringent for Energy standards)
 In 2001 Florida adopted only the Power Allowance portion of ASHRAE 90.1
 In 2004 Florida adopted their own code, calling it “The Florida Building
Code, Chapter 13-Florida Energy Efficiency for Building Construction 2004”
(which remains very similar to ASHRAE 90.1). This code was expanded to
include both the Power Allowance and the Lighting Control sections
 In 2007 the code was revised and published but not yet adopted
 On March 1st of 2009, the revised (2007) Florida Energy code was adopted
complete with the 2009 Glitch amendments in their legislative format
 This is the Law !!!
Florida Energy Code
6
Current Codes
Florida Energy Code
7
Intent & Scope of Energy Code
• The provisions of The Florida Building Code - Chapter 13,
Florida Energy Efficiency for Building Construction shall
regulate:
(1) Building Envelopes
(2) Energy Systems: Mechanical, Electrical, & Illumination
Systems for
- New building construction
- Additions
- Alterations
- Any change in building configuration
Florida Energy Code
8
Florida Energy Code - Sections
• This code is a statewide code and shall not be made more
stringent or lenient by local government.
Ch.13 Sections:
1. Fenestrations (Glazing)
2. Walls
3. Doors
4. Roofs/Ceilings
5. Floors
6. Air Infiltration
7. Space Cooling Systems
8. Space Heating Systems
Florida Energy Code
9. Ventilation
10. Air Distribution Systems
11. Pumps & Piping
12. Water Heating Systems
13. Electric Power
14. Motors
15. Lighting
9
New Construction & Additions
• The provisions of this chapter apply to the Lighting Power
Density and the Control requirements of:
- All commercial occupancy buildings of any size
- Additions to existing commercial occupancy buildings
- Multiple-family residential buildings 4 stories or more
above grade
- Interior & Exterior Lighting
Alterations & Renovations
• Generally treated as New Construction
• Replacement of lighting systems must comply
• New or replacement control devices must comply
Florida Energy Code
10
13-415: Applicable Areas
This section of Chapter 13 shall apply to the following:
1. Interior Spaces of buildings;
2. Exterior building features, including facades, illuminated
roofs, architectural features, entrances, exits, loading
docks, and illuminated canopies; and
3. Exterior building grounds lighting provided through the
building’s electrical service.
Florida Energy Code
11
13-415: Exempt Areas
* The following are exempt from both the Power Allowance & Controls…
1.
Emergency lighting that is automatically off during normal building
operation
(ex: emergency lighting bug-eyes, recessed ceiling drop down
emergency units, etc.)
2.
Lighting within living units (ex: individual condo units)
3.
Lighting that is specifically designated as required by a health or life
safety statute, ordinance, or regulation
(ex: NFPA 101 – Life Safety states stairs must have 10fc of lighting and
lighting for that purpose would be exempt.)
Decorative gas lighting systems
4.
5.
Historic buildings, Federally Mandated buildings, and buildings with a
total power density of <1W/ft2
Florida Energy Code
12
Mandatory: Types of Controls
13-415.1.AB.1.1 Automatic Lighting Shutoff
• Required if building is over 5,000 ft2
• Required to control lighting in all spaces (unless exempt)
• (3) Options for Controls:
1.
A scheduled basis using time-of-day operated control device that turns
lighting off at specific programmed times (Dimming or Relay System
with Low Voltage Switches in spaces)
- controls ≤ 25,000ft2 or not more than (1) floor
2.
Occupant Sensor (max setting of 30 min.)
3.
Signal from another control or alarm
device that indicates the area is unoccupied
* You can mix and match the above techniques
Florida Energy Code
13
Mandatory: Types of Controls
Clarification per the DOE:
- A building is clarified as a “Building area
surrounded by exterior walls or fire walls.”
The following interpretation is per the U.S. Department of Energy, Building
Energy Codes Program available online at:
http://www.energycodes.gov/training/onlinetraining/video_standard9012004_lighting.stm
* Per the DOE, The intent of the code is to apply to business entities where
the whole building control is practical (however, up to local electrical plan
reviewer interpretation)
Ex: If you have a 10,000 square foot strip mall, with (5) 2,000 square foot
tenants, and there are fire walls in between each tenant, you DO NOT
need to meet the automatic shutoff requirements for each tenant.
Ex: If you have a 10,000 square foot, 3-story office building, with (4) 2,000
square foot tenants and 2,000 square feet of common area you DO need
to have a control system for the tenants and the building common
spaces.
Florida Energy Code
14
Mandatory: Control Exceptions
13-415.1.AB.1.1 Automatic Lighting Controls:
Exceptions:
a. Lighting intended for 24-hour operation.
(ex: 24-hour pharmacy, 24-hour shift manufacturing facilities, etc.)
b. Lighting in spaces where patient care is rendered.
(ex: hospital rooms, assisted living suites, etc.)
c. Spaces where an automatic shutoff would endanger the
safety or security of the room or building occupant(s).
(ex: mechanical and electrical equipment room, operating room, dental
suites, workshops, etc.)
Florida Energy Code
15
Mandatory: Indiv. Space Controls
13-415.1.AB.1.2 Space Control:
• Each space enclosed by ceiling-height partitions shall
have at least one control device to independently
control the general lighting within a space.
• Each control shall be capable of overriding
any time-of-day scheduled shut-off control
for no more than 4 hours
• In ≤10,000 ft2 spaces, each control can serve a
max of 2,500 ft2
• In > 10,000 ft2 spaces, each control can serve a
max of 10,000 ft2
Florida Energy Code
16
Mandatory: Indiv. Space Controls
13-415.1.AB.1.2 Space Control:
• Controls can be activated:
• Automatically by sensing an occupant (oc. sensor) or
• Manually by an occupant (oc. sensor with an override
button or a low voltage “smart” switch tied to a relay panel)
• Each manual device shall be readily accessible and
located so the occupants can see the controlled
lighting.
Exceptions:
• Remote locations are permitted where security or safety are a concern
• Remote control must be labeled to identify the controlled lighting
• Remote control must have an indicator pilot light on or next to the
device
Florida Energy Code
17
Mandatory: Indiv. Space Controls
13-415.1.AB.1.2 Space Control:
• Occupancy Sensors, that turn lights off within 30 min. of an
occupant leaving the space are required in the following
specific spaces:
(1) Certain Classrooms
(2) Conference/Meeting Rooms
(3) Employee Lunch & Break Rooms
* Reasoning: Because these spaces are rarely used, an occupancy sensor will save more energy than
another type of control
Exceptions:
• If you put an occupancy sensor in these spaces, these spaces are not required
to be connected to other automatic lighting shutoff controls.
• This requirement does not apply to spaces with multi-scene control, shop
classrooms, laboratory classrooms, and preschool through twelfth grade
classrooms. (They are treated as any other space & require (1) of the (3) types
of mandatory controls!!!)
Florida Energy Code
18
Mandatory: Additional Controls
13-415.1.AB.1.3 Additional Control:
• Controls are required in the following cases:
•
Hotel and motel guest rooms lighting. Hotel and motel guest rooms
and guest suites shall have a master control device at the main room
entry that controls all permanently installed luminaires and switched
receptacles.
(ex: A card reader that
requires you to insert your
card when you enter the room
in order to turn the lights on.
Or a master switch which
overrides all other switches in
the space. )
Florida Energy Code
19
Mandatory: Additional Controls
13-415.1.AB.1.3 Additional Control:
• Separate controls are required in the following cases: (if additional to
ambient lighting)
•
•
•
•
•
Display or accent lighting.
Case Lighting. Lighting in cases used for display purposes shall have a
separate control device.
Task Lighting. Supplemental task lighting shall have a control device
integral to the luminaires or be controlled by a wall mounted control
device provided the control device is readily accessible and located so
that the occupant can see the controlled lighting.
Non-visual lighting. Lighting for nonvisual applications, such as plant
growth and food warming.
Demonstration Lighting. Lighting equipment that is for sale or for
demonstration in lighting education.
Florida Energy Code
20
Mandatory: Exterior Ltg Controls
13-415.1.AB.1.4 Exterior Lighting Control:
• Photocell or astronomical time switch with 10
hour memory for dusk-to-dawn lighting (or)
• Lighting not designated as dusk-to-dawn shall
be controlled only with an astronomical time
switch with 10 hour memory
• Exceptions:
• Covered vehicle entrances
• Exits from buildings or parking
structures where required for safety,
security, or eye adaptation
Florida Energy Code
21
Mandatory: Exterior Ltg Efficiency
13-415.1.AB.2 Exterior Building Grounds Lighting:
• Exterior Lighting > 100 Watts must also be > 60 lumens/watt
• Exception: the luminaire is controlled by a motion sensor or is exempt
under Section 13-415.0 or Section 13-415.AB.1.3)
Florida Energy Code
22
Mandatory: Tandem Wiring
13-415.1.AB.3 Tandem Wiring:
• This section of the code must only be adhered to if
Magnetic ballasts are used (T12 lamps) because
magnetic ballasts work best if driving two lamps, not
one
• One of several exceptions to this section of the code
is to use an electronic ballast
Mandatory: Exits
13-415.1.AB.4 Exit Signs:
• Internally illuminated exit signs shall not
exceed 5 watts per face.
Florida Energy Code
23
Prescriptive: 2 Methods
This chapter contains two methods to comply with the
prescriptive requirements of the code:
• Method A: Whole Building Performance Method
• Method B: Building Envelope Trade-off Method
Question: Who chooses which Method to use?
Answer:
Typically the Mechanical Engineer running the
EnergyGuage FLA/COM software program
* Energy compliance printouts from EnergyGuage FLA/COM are
required by Florida to be submitted during the permitting stage
Florida Energy Code
24
Prescriptive: Interior Lighting
13-415.AB.5 Interior lighting power, Scope
•
The interior lighting power allowance for a building or a separately
metered or permitted portion of a building shall be determined by the:
Space by Space Method – described in section 13-415.B.1
• Trade-Offs of interior lighting power allowance among portions of the
building for which a different method of calculation has been used are
not permitted
•
Installed interior lighting power must be < than the Allowed interior
lighting power
Florida Energy Code
25
Prescriptive: Interior Lighting
13-415.AB.5.1 Installed Interior Lighting Power
•
Exceptions:
- The 15 Items listed in the next few slides shall NOT be included in BOTH
the lighting power allowance and the installed interior lighting power
- However…
- the lighting listed must be in addition to the general lighting
- the lighting listed must be independently controlled
Florida Energy Code
26
Prescriptive: Exempt Interior Ltg.
Exceptions:
1.
Display or accent lighting that is an essential element for the function
performed in galleries, museums, monuments.
2.
Lighting that is integral to equipment or instrumentation and is installed
by its manufacturer.
3.
Lighting specifically designed for use only during medical or dental
procedures and lighting integral to medical equipment.
4.
Lighting integral to both open and glass enclosed refrigerator and freezer
cases.
5.
Lighting integral to food warming and food preparation equipment.
6.
Lighting for plant growth or maintenance.
7.
Lighting in spaces specifically designed for use by the visually impaired.
Florida Energy Code
27
Prescriptive: Exempt Interior Ltg.
8.
Lighting in retail display windows, provided the display area is enclosed by
ceiling-height partitions. (ex: Macy’s store windows in NYC)
9.
Lighting in interior spaces that have been specifically designated as a
registered historic landmark. (ex: Inside Independence Hall in Philly)
10. Lighting that is an integral part of advertising or directional signage.
(ex: lighting within a sign that is purchased for the building)
11. Exit signs.
12. Lighting that is for sale or lighting educational demonstration systems.
13. Lighting for theatrical purposes, including performance, stage, and film,
and video production.
14. Lighting for television broadcasting in sporting activity areas.
15. Casino gaming areas.
Florida Energy Code
28
Prescriptive: Installed Interior Ltg.
13-415.AB.5.1 Installed Interior Lighting Power & Appendix B:
When calculating watts, you must include ALL power used by the luminaire
• Lamps
• Ballasts/Drivers
• Current Regulators
• Control Devices
Screw Based Medium Socket Incandescents & Halogens– maximum
labeled wattage of the luminaire
Luminaires with Ballasts, Drivers or Transformers – max. UL labeled
wattage of lamp/ballast/driver combination or transformer
Line Voltage Track – max. wattage of luminaires in the system or a
min. of 30W per linear foot (whichever is greater)
Low Voltage Track – wattage of the transformer supplying the system
Exception: if two systems are in a space and you can only turn one on at a
time
Florida Energy Code
29
Prescriptive: Calculation Methods
13-415.B.1 Space-By- Space Method of Calculating Interior Lighting Power
Allowance (LPA)
1.
2.
3.
4.
5.
6.
Determine the appropriate building type from table 13-415.B.1
For each space enclosed by partitions 80 % or greater than the ceiling height
determine the floor area
Determine the LPA by using the columns designated space-by-space.
Multiply the floor area (s) times the allowed Lighting Power Density (LPD) for
the space type that most closely represents the proposed use of the space
The product is the LPA for the space
The interior LPA is the sum of LPA’s for all spaces
Note: You can go to the IESNA website to see how
ASHRAE and IESNA came up with the LPD for each space.
Note: Tradeoffs of Spaces are Allowed (see 13-415.B.1.4)
provided that the total installed interior lighting power does
not exceed the interior lighting power allowance.
Florida Energy Code
30
Prescriptive: Calculation Methods
Table 13-415.B.1Lighting Power Densities (LPD) Using the Space-By Space Method
Common Space Types
LPD
(W/ft²)
Common Space Types
LPD
(W/ft²)
Office – enclosed
1.1
for Gymnasium
0.4
Office – open plan
1.1
for Exercise Center
0.3
Conference/Meeting/Multipurpose
1.3
for Convention Center
0.7
Classroom/Lecture/Training
1.4
for Penitentiary
0.7
1.3
for Religious Buildings
1.7
1.3
for Sports Arena
0.4
for Hotel
1.1
for Performing Arts Theatre
2.6
for Performing Arts Theatre
3.3
for Motion Picture Theatre
1.2
for Motion Picture Theatre
1.1
for Transportation
0.5
for Penitentiary
Lobby
Audience/seating area
Florida Energy Code
0.9
Atrium-First three floors
0.6
31
Prescriptive: Calculation Methods
Table 13-415.B.1- Continued
Lighting Power Densities (LPD) Using the Space-By Space Method
Common Space Types
LPD
(W/ft²)
Common Space Types
LPD
(W/ft²)
Atrium- each additional floor
0.2
Laboratory
1.4
Lounge/Recreation
1.2
Restrooms
0.9
0.8
Dressing/Locker/Fitting room
0.6
for Hospital
Dining Area
0.9
Corridor/Transition
0.5
for Penitentiary
1.3
for Hospital
1.0
for Hotel
1.3
for Manufacturing facility
0.5
for Motel
1.2
Stairs - active
0.6
for Bar lounge/Leisure dining
1.4
Active storage
0.8
for Family dining
2.1
for Hospital
0.9
Food preparation
1.2
Florida Energy Code
Inactive storage
0.3
32
Prescriptive: Calculation Methods
Table 13-415.B.1- Continued
Lighting Power Densities (LPD) Using the Space-By Space Method
Common Space Types
for Museum
LPD
(W/ft²)
Building Specific Space Types
LPD
(W/ft²)
0.8
Judges chambers
Electrical/Mechanical
1.5
Fire stations
Workshop
1.9
Fire station engine room
0.8
Sleeping quarters
0.3
Building Specific Space Types
LPD
(W/ft²
Gymnasium/Exercise center
Post Office – sorting area
1.2
1.3
Playing area
1.4
Convention center – exhibit space
Exercise area
0.9
Library
Courthouse/Police station/Penitentiary
1.3
Card file & cataloguing
1.1
Courtroom
1.9
Stacks
1.7
Confinement cells
0.9
Reading area
1.2
Florida Energy Code
33
Prescriptive: Calculation Methods
Table 13-415.B.1- Continued
Lighting Power Densities (LPD) Using the Space-By Space Method
Building Specific Space Types
LPD
(W/ft²)
Hospital
Building Specific Space Types
LPD
(W/ft²)
Physical therapy
0.9
Radiology
0.4
Emergency
2.7
Recovery
0.8
Laundry/Washing
0.6
Nurse station
1.0
Automotive/Service/Repair
0.7
Exam/Treatment
1.5
Manufacturing
Pharmacy
1.2
Low bay (<25 ft floor to ceiling height)
1.2
Patient room
0.7
High bay (>25 ft floor to ceiling height)
1.7
Operating room
2.2
Detailed manufacturing
2.1
Nursery
0.6
Equipment room
1.2
1.4
Control room
0.5
Medical supply
Florida Energy Code
34
Prescriptive: Calculation Methods
Table 13-415.B.1- Continued
Lighting Power Densities (LPD) Using the Space-By Space Method
Building Specific Space Types
Dormitory – Living quarters
LPD
(W/ft²)
1.1
Museum
Building Specific Space Types
Mall concourse
LPD
(W/ft²)
1.7
Sports arena
General exhibition
1.0
Ring sports area
2.7
Restoration
1.7
Court sports area
2.3
1.5
Indoor playing field area
1.4
Bank/Office –banking activity area
Religious buildings
Worship – pulpit, choir
Fellowship hall
Warehouse
2.4
Fine material Storage
1.4
0.9
Medium/bulky material storage
0.9
Retail (for accent lighting see Sec. 415.B.2)
Sales area²
Florida Energy Code
Parking garage – garage area
1.7
0.2
Transportation
35
Prescriptive: Calculation Methods
Table 13-415.B.1- Continued
Lighting Power Densities (LPD) Using the Space-By Space Method
Building Specific Space Types
LPD
(W/ft²)
Building Specific Space Types
Airport – concourse
0.6
----
Air/Train/Bus –Baggage area
1.0
----
Terminal – Ticket counter
1.5
----
LPD
(W/ft²)
In cases where both a common space type and a building specific space type
are listed, the building specific space type shall apply.
Florida Energy Code
36
Prescriptive: Exterior Power
Allowances
Exterior Building Lighting Power Densities
See enclosed table 13-415.AB.2.2
The upper part of the table includes tradable surfaces. An example
would be if you used less than the allowable 0.15 W/ft² for the
Parking Lots, you could use the left over power in your walkways
or possible the outdoor stairways.
The lower part of the table includes non tradable surfaces. Each
application can be used only for the specific application and
cannot be traded between surfaces or with other exterior
lighting. It is a use it or lose it application.
The total exterior lighting power allowance would be the sum of all
individual power allowances plus a bonus of 5%
Florida Energy Code
37
Prescriptive: Exterior Power
Allowances
Applications
Lighting Power Densities
Uncovered Parking Areas
Parking Lots & Drives
0.15W/ft²
Building Grounds
Tradable Surfaces (Lighting power
densities for uncovered parking areas,
building grounds, building entrances, and
exits, canopies and overhangs and
outdoor sales areas may be traded.)
Walkways less than 10 feet wide
1.0W/linear foot
Walkways 10 feet wide or greater, Plaza
areas, Special Feature areas
0.2W/ft²
Stairways
1.0W/ft²
Building Entrances and Exits
Main entries
Other doors
30W/linear foot of door width
20W/linear foot of door width
Canopies and Overhangs
Canopies (free standing and attached and
overhangs
Florida Energy Code
1.25W/ft²
38
Prescriptive: Exterior Power
Allowances
Applications
Tradable Surfaces (Lighting power densities
for uncovered parking areas, building
grounds, building entrances, and exits,
canopies and overhangs and outdoor sales
areas may be traded.)
Non Tradable Surfaces (Lighting power
density calculations for the following
applications can be used only for the specific
application and cannot be traded between
surfaces or with other exterior lighting. The
following allowances are in addition to any
allowance otherwise permitted in the
“Tradable Surfaces” section of this table.
Source: Table 9.4.5, ANSI/ASHRAE/IESNA
90.1-2007
Florida Energy Code
Lighting Power Densities
Outdoor Sales
Open areas (including vehicle sales lots)
0.5W/ft²
Street frontage for vehicle sales lots in
addition to “open area” allowance
20W/linear foot
Building Facades
0.2W/ft² for each illuminated wall or surface
or 5.0W/linear foot for each illuminated wall
or surface length
Automated teller machines and night
depositories
270W per location plus 90W per additional
ATM per location
Entrances and gatehouse inspection stations
at guarded facilities
1.25W/ft² of uncovered area (covered areas
are included in the “Canopies and Overhangs”
section of “Tradable Surfaces”)
Loading areas for law enforcement, fire,
ambulance and other emergency service
vehicles
0.5W/ft² of uncovered area (covered areas are
included in the “Canopies and Overhangs”
section of “Tradable Surfaces”)
Drive-up windows at fast food restaurants
400W per drive-through
Parking near 24 hour retail entrances
800W per main entry
39
Prescriptive: Exterior Power
Exemptions
•
Exceptions:
- The (9) items listed in the next few slides shall NOT be included in the
exterior lighting power allowance
- However…
- the lighting listed must be independently controlled
(a) Specialized signal, directional, and marker lighting associates with
transportation;
(b) Advertising signage or directional signage;
(c) Lighting that is integral to equipment or instrumentation and is
installed by its manufacturer;
(d) Lighting for theatrical purposes, including performance,
stage, film, and video production
Florida Energy Code
40
Prescriptive: Exterior Power
Exemptions
(e) Lighting for athletic playing areas; (ex: a football and soccer field)
(f) Temporary lighting;
(g) Lighting for industrial production, material handling,
transportation sites and associated storage areas; (ex: A concrete
facility that produces tilt-up walls outside and ships them out)
(h) Theme elements in theme/amusement parks; (ex: Disney World)
(i) Lighting used to highlight features of public monuments and
registered historic landmark structures or buildings. (ex: lighting
the Washington Monument in D.C., lighting the American Flag)
Florida Energy Code
41
Any Questions?
Course Title: The Florida Energy Code– SESCO Lecture #8
Provider: Allen Weiss / Shayna Bramley
AIA/CES Provider # / Course #: L140 / SES8
FL DBPR-Arch Provider # / Course #: 8190 / AR.12.1371
FL DBPR-Land. Arch Provider # / Course #: N/A
FL DBPR-Int. Des. Provider # / Course #: 8190 / 05.11.713
FL DBPR-Elec.Contr. Provider # / Course #: 0003283 / 0007607
IDCEC (ASID, IIDA) Course #: 7898
FBPE Provider #: 0003992
ASLA#: Coming soon
SESCO Lighting
1133 W. Morse Blvd. Suite 100
Winter Park Florida 32789
407-629-6100
This concludes the American
Institute of Architects and DBPR
Continuing Education Systems
Program
www.sescolighting.com
Florida Energy Code
42