suresh - Aditya Auto

advertisement
G.Mani vannan
Mobile: +91-9840715024
E-mail: [email protected]
Career Objective:
To utilize and enhance my Technical and Interpersonal Skills to the best extent possible working in a team, and
to work in a competitive environment there by bestow my fullest potential for growth of the company.
Professional Experience:
Total Experience: 5years - till date.

Working as an Applications Engineer in Apna Technologies and Solutions (P) Ltd, Chennai and
Bangalore (Selected Alliance Partners of National Instruments) - 10th July 2006 – till date
Skill Sets:

Proficient in panel/Enclosure designing /Sensor fixtures (using AutoCAD, PRO-E, Solidworks) and
commissioning.

System configuration skills for automated test systems.

Knowledge and hands on experience in virtual instrumentation concepts.

Knowledge on NI based DAQ, measurement, automation and control.

Hands-on experience with PCI, FP and PXI DAQ configuration and testing.

Knowledge in communication standards like ETHERNET, RS 232, RS 485, GSM in LabVIEW
environment.

Proficiency in NI DAQ, NI PXI, NI FP platforms with LabVIEW 7.1, 8.2, 8.5

Experienced in selection and using industrial standard sensors for travel, temperature,
pneumatic/hydraulic pressure, thermocouple, vibration, and voltage and strain measurements.

Proficiency in working in windows/Linux environment.

Proficiency in PCB designing.

Proficiency Strain gauge sticking

LabVIEW (7.1, 8.0, 8.2, 8.5) code troubleshooting skills.
Job Profile:

As an Senior
Application
engineer




Responsible for the Hardware design /development, Panel design, PCB design
and testing.
Sensor and component selection.
System/Project installation, integration, Validation and Commissioning.
Support after Installation.
Software configuration for application.
Projects done as an Senior Applications Engineer:
Project 1
Wheel Impact Load Detector (INDIAN RAILWAYS)
Role
Senior Applications Engineer
Responsibilities










Panel Design
Wiring Design
Site integration
Testing
Calibration
Railway Coordination
Troubleshooting
Software integration
Validation
System supporting after the Validation
Team Size
10
Duration Involved
3Year 7months.
Description
The system checks the flat wheels of train and impact load of the each
wheel on rails during running condition. And the speed limit of the
system is 30 Kmph to 160 Kmph and calculates maximum and average
load on each wheel. The train report is published in the web after 3
minutes train crossing the system. Report is transferred to the server by
using the wireless modem [data card]. Goal of the system is to prevent
the accident and the railway track safety. The system running time is
24/7.
Hardware Used
NI cRIO Hardware with Embedded Controller and FPGA, GSM, Strain
gauges.
Software Used
LabVIEW 8.2, LabVIEW FPGA, LabVIEW RT,
Project 2
CDAQ Data Logger (INDIAN RAILWAYS RDSO,BREAKS
INDIA,etc.,)
Role
Senior Applications Engineer
Responsibilities






Logger enclosure design wiring.
Material selection (connector, sensor, battery etc.,).
PCB design/testing.
Integration and Validation
System supporting after the Validation
Application software configuration and testing.
Team Size
2
Duration Involved
1Year
Static and Dynamic performance of a vehicle can be tested analyzed
Description
using this system. An NI based cRIO-RT system with FPGA which is used
for acquiring different parameters like pressure, travel, strain, speed,
temperature of different parts of a vehicle.
.
Hardware Used
NI Hardware
Software Used
LabVIEW
Project 3
Real Time wireless DAQ (SERC)
Role
Applications Engineer
Responsibilities





Team Size
3
Duration Involved
3 Month.
Description
The system is used to measure the life time of bridge, cell phone towers,
civil and mechanical parts. System measures the strain and voltage and
logs the data for a week continuously which is used to analyze the life
time of the UUT. The client system communicates with the host system
through LAN, GSM, and PSTN.
Hardware Used
NI PXI,NI SCXI,GSM Modem, Strain gauges.
Software Used
LabVIEW 8.0, Lab view RT
Project 4
Servo Performance Rig (BREAKS INDIA)
Role
Applications Engineer
Responsibilities






Software configuration/testing.
Panel design in AutoCAD.
Integration.
Testing.
System supporting after the Validation
System study
Software Study
Application Software modification
Application Software Testing
Integration and Validation
System supporting after the Validation
Team Size
1
Duration Involved
2Months
Description
It is the performance testing system of Break Booster.
Three measurement are taken using the system
 Pressure measurement
 Piston travel measurement
 Load measurement
The total testing time of a single cycle is 20 seconds.
Hardware Used
NI PCI 6221
Software Used
LabVIEW 8.0
Project 5
Weiss climate chamber ((BREAKS INDIA)
Role
Application Engineer
Responsibilities






System study
System Upgradation.
Code study
Application Software modification and Testing
Integration
System supporting after the Validation
Team Size
2
Duration Involved
1 Month.
Description
The system is used to test the performance of break booster in cold
condition. Break is continuously applied at -40 deg C to test the
booster’s performance.
Hardware Used
NI FP
Software Used
LabVIEW 7.1
Project 6
Cluster Lamp Sequence control system (PRICOL)
Role
Applications Engineer
Responsibilities





Panel wiring
Application Software Testing
Application software modification
Integration and Validation
System supporting after the Validation
Team Size
1
Duration Involved
2 months
Description
The system checks the bike’s cluster whether the lamps on the clusters
operate in sequence. This is done by switching and illuminating the
lamp in sequence. During the test, cluster image is captured by camera
and the image is compared with master cluster image.
Hardware Used
Soliton Camera, NI PCI 6221
Software Used
LabVIEW 7.1, NI Vision
Academics:

Diploma in Electrical & Electronics from Madurai K.L.Nagaswamy Memorial Polytechnic College.
First Class with Honors – 92.54%.
Strengths:
 Proficient in panel designing and commissioning.
 Development and analysis of electrical and panel drawings.
 Sound technical, analytical and logical skills.
 Ability to learn and cope with new technologies.
 Good communication skills.
 Vibrant team player.
Personal Details:
Father’s Name
Address
: Mr. V.Ganesan
: 19, thiruvalluvar street, K.K. Nagar
Madurai - 625020.
Marital status
: Single.
Languages Known
: Tamil, English
Dec larat ion
I hereby declare that the above furnished information is correct to the best of my knowledge.
Place: Chennai.
Date:
Yours sincerely,
G. Manivannan
Download