International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft
International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 May to 31 May 2012
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 1
Screw threads
ISO/CD 965-1
ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data
TC 6
Paper, board and pulps
ISO/CD 14453
Pulps — Determination of acetone-soluble matter
TC 10
Technical product documentation
ISO/CD 17599
Technical product documentation (TPD) — General requirements of digital mock-up for mechanical products
TC 17
Steel
ISO/CD 683-18
Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright products of unalloyed and low alloy steels
TC 20
Aircraft and space vehicles
ISO/CD 27027
Aerospace — Solid-state remote power controllers — General performance requirements
ISO/CD 7257
Aircraft — Hydraulic tubing joints and fittings — Rotary flexure test
TC 22
Road vehicles
ISO/CD 19072-1
Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 1: Pocket
interface definition
ISO/CD 19072-2
Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 2: Test
methods and general performance requirements
TC 23
Tractors and machinery for agriculture and forestry
ISO/DTR 129342
Tractors and machinery for agriculture and forestry — Basic types — Part 2: Codification for road-use
ISO/CD 11783-7
Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 7:
Implement messages application layer
ISO/CD 1178312
Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 12:
Diagnostics services
TC 28
Petroleum products and lubricants
ISO/CD 17196
Dimethyl ether (DME) for fuels — Determination of impurities — Gas chromatographic method
ISO/CD 17197
Dimethyl ether (DME) for fuels — Determination of water content — Karl Fischer titration method
ISO/CD 17198
Dimethyl ether (DME) for fuels — Determination of total sulfur, ultraviolet fluorescence method
ISO/CD 17786
Dimethyl ether (DME) for fuels — Determination of evaporation residues — Mass analysis method
TC 33
Refractories
ISO/CD 16835
Refractory products — Determination of thermal expansion
TC 38
Textiles
ISO/CD 16533
Textiles — Measurement of exothermic and endothermic properties of textiles under humidity change
ISO/CD 17299-1
Textiles — Determination of deodorant property — Part 1: General principle
ISO/CD 17299-2
Textiles — Determination of deodorant property — Part 2: Detector tube method
ISO/CD 17299-3
Textiles — Determination of deodorant property — Part 3: Gas chromatography method
ISO/CD 17617
Textiles — Determination of simulated sweat drying rate
TC 41
Pulleys and belts (including veebelts)
ISO/CD 10247
Conveyor belts — Characteristics of covers — Classification
TC 43
Acoustics
ISO/CD 9295
Acoustics — Measurement of high-frequency noise emitted by computer and business equipment
TC 61
Plastics
ISO/CD 17221
Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image)
ISO/CD 22007-6
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal
conductivities using a temperature-modulation technique
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries
ISO/CD 16440
Petroleum and natural gas industries — Pipeline transportation systems — Design, construction and maintenance of steel
cased pipelines
TC 96
Cranes
ISO/CD 16715
Cranes — Hand signals used with cranes
ISO/CD 16716
Cranes — Monitoring for crane design life
TC 98
Bases for design of structures
ISO/CD 4355
Bases for design of structures — Determination of snow loads on roofs
TC 106
Dentistry
ISO/CD 22674
Dentistry — Metallic materials for fixed and removable restorations and appliances
ISO/CD 9680
Dentistry — Operating lights
ISO/CD 16954
Dentistry — Test methods for evaluating microbiological treatment methods for dental unit procedural water
TC 113
Hydrometry
ISO/CD 4375
Hydrometric determinations — Cableway systems for stream gauging
TC 118
Compressors and pneumatic tools, machines and equipment
ISO/CD 1114813
Hand-held non-electric power tools — Safety requirements — Part 13: Fastener driving tools
TC 123
Plain bearings
ISO/CD 17606
Plain bearings — Lubrication characteristics of cross-heads pin bearings for low speed marine diesel engines
TC 130
Graphic technology
ISO/CD 12643-1
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General
requirements
ISO/CD 12647-5
Graphic technology — Process control for the manufacture of half-tone colour separations, proof and production prints —
Part 5: Screen printing
TC 131
Fluid power systems
ISO/CD 10767-1
Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method
for determining source flow ripple and source impedance of pumps
ISO/CD 10771-1
Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 1: Test method
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 15494
Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE) and polypropylene (PP) —
Specifications for components and the system — Metric series
TC 142
Cleaning equipment for air and other gases
ISO/CD 15957
Challenge contaminants for testing air cleaning equipment
TC 146
Air quality
ISO/CD 8672
Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy
— Membrane filter method
TC 154
Processes, data elements and documents in commerce, industry and administration
ISO/CD 9735-10
Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules
(Syntax version number: 4, Syntax release number: 1) — Part 10: Syntax service directories
TC 159
Ergonomics
ISO/CD 9241940
Ergonomics of human-system interaction — Part 940: Evaluation of tactile and haptic interactions
TC 163
Thermal performance and energy use in the built environment
ISO/CD 6781-3
Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared methods — Part 3:
Qualifications of Equipment Operators, Data Analysts and Report Writers
TC 165
Timber structures
ISO/CD 17754
Torsional Resistance of Driving in Screws
TC 172
Optics and photonics
ISO/CD 10110-5
Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
ISO/CD 1011019
Optics and photonics — Preparation of drawings for optical elements and systems — Part 19: Optical freeform surfaces
ISO/CD 14999-4
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation
and evaluation of tolerances specified in ISO 10110
ISO/CD 17328
Optics and photonics — Optical materials and components — Test method for refractive index of infrared optical materials
ISO/CD 11979-6
Ophthalmic implants — Intraocular lenses — Part 6: Shelf-life and transport stability
TC 184
Automation systems and integration
ISO/CD 22400-1
Automation systems and integration — Key performance indicators for manufacturing operations management — Part 1:
Overview, concepts and terminology
TC 188
Small craft
ISO/CD 6185-3
Inflatable boats — Part 3: Boats with a maximum motor power rating of 15 kW and greater
TC 201
Surface chemical analysis
ISO 181151:2010/CD Amd
1
Surface chemical analysis — Vocabulary — Part 1: General terms and terms used in spectroscopy — Amendment 1
ISO 181152:2010/CD Amd
1
Surface chemical analysis — Vocabulary — Part 2: Terms used in scanning-probe microscopy — Amendment 1
TC 204
Intelligent transport systems
ISO/DTR 17465
Intelligent transport systems - Definition of terms for "Cooperative ITS" and guidelines for standards
ISO/CD 17931
Intelligent transport systems — Extension of map database specifications for Local Dynamic Map for applications of
Cooperative ITS
ISO/DTS 17931
Intelligent transport systems — Extension of map database specifications for Local Dynamic Map for applications of
Cooperative ITS
TC 210
Quality management and corresponding general aspects for medical devices
ISO/IEC DTR
24971
Guidance on the application of ISO 14971
TC 218
Timber
ISO/CD 17959
General requirements for solid wood flooring
JTC 1
Information technology
ISO/IEC CD
29182-3
Reference architecture for sensor network applications and services — Part 3: Reference architecture views
ISO/IEC CD
29182-4
Reference architecture for sensor network applications and services — Part 4: Entity models
ISO/IEC
15414:2006/PDA
M1
Information technology — Open distributed processing — Reference model — Enterprise language — Amendment 1:
ODP — The expression of Obligations and Policies
ISO/IEC CD
11770-3
Information technology — Security techniques — Key management — Part 3: Mechanisms using asymmetric techniques
ISO/IEC 138181/PDAM 3
Information technology — Generic coding of moving pictures and associated audio information: Systems — Part 1: —
Amendment 3: Transport of HEVC video over MPEG-2 systems
ISO/IEC 144961:2010/PDAM 2
Information technology — Coding of audio-visual objects — Part 1: Systems — Amendment 2: Support for raw audiovisual data
ISO/IEC 1449610:2012/PDAM 2
Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 2
ISO/IEC 1449615:2010/PDAM 2
Information technology — Coding of audio-visual objects — Part 15: Advanced Video Coding (AVC) file format —
Amendment 2: Carriage of high-efficiency video coding (HEVC)
ISO/IEC CD
14496-29
Web video coding — Part 29:
ISO/IEC 2300012:2010/PDAM 3
Information technology — Multimedia application format (MPEG-A) — Part 12: Interactive music application format —
Amendment 3
ISO/IEC CD
23001-8
Information technology — MPEG systems technologies — Part 8: Coding-independent code-points
ISO/IEC 230033:2012/PDAM 1
Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Amendment 1:
Conformance
ISO/IEC 230033:2012/PDAM 2
Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Amendment 2:
Reference software
ISO/IEC 230073:2011/PDAM 1
Information technology — Rich media user interfaces — Part 3: Conformance and reference software — Amendment 1:
Conformance and reference software for widget extension and AUI
ISO/IEC CD
23009-2
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 2: Conformance and reference
software
ISO/IEC CD
23009-4
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 4: Segment Encryption and
Authentication
ISO/IEC CD
15961-4
Information technology — Radio frequency identification (RFID) for item management: Data protocol — Part 4:
Application interface commands for battery assist and sensor functionality
ISO/IEC CD
30119
Quality Standard for the Creation and Delivery of Fair, Valid and Reliable e-Tests
DIS circulated
Period from 01 May to 31 May 2012
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote
terminates
TC 8
Ships and marine technology
ISO/DIS 16446
Ships and marine technology — Marine environment protection — Adapter for joining dissimilar boom
connectors
2012-10-26
(Revision of ISO 16446:2002)
TC 17
ISO/DIS 3573
Steel
*
Hot-rolled carbon steel sheet of commercial and drawing qualities
2012-09-25
(Revision of ISO 3573:2008)
ISO/DIS 3574
*
Cold-reduced carbon steel sheet of commercial and drawing qualities
(Revision of ISO 3574:2008)
2012-09-25
TC 20
ISO/DIS 6517
Aircraft and space vehicles
*
Air cargo — Certified lower deck containers — Design and testing
2012-10-23
(Revision of ISO 6517:1992)
ISO/DIS 14186
*
Air cargo — Fire containment covers — Design, performance and testing requirements
2012-10-26
ISO/DIS 16049-2
*
Air cargo equipment — Restraint straps — Part 2: Utilization guidelines and lashing conditions
2012-10-29
(Revision of ISO 16049-2:2005)
TC 21
ISO/DIS 6182-10
Equipment for fire protection and fire fighting
*
Fire protection — Automatic sprinkler systems — Part 10: Requirements and test methods for domestic
sprinklers
2012-10-16
(Revision of ISO 6182-10:2006)
TC 22
ISO/DIS 11451-4
Road vehicles
*
Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated
electromagnetic energy — Part 4: Bulk current injection (BCI)
2012-10-09
(Revision of ISO 11451-4:2006)
ISO/IEC DIS
15118-2
Road vehicles — Vehicle to grid communication interface — Part 2: Network and application protocol
requirements
2012-10-19
ISO/DIS 13052
*
Road vehicles — Trailers up to 3,5t — Requirements for jockey wheels and drawbar supports
2012-10-26
ISO/DIS 21308-5
*
Road vehicles - Product data exchange between chassis and body work manufacturers (BEP) — Part
5: Coding of loader crane bodywork
2012-10-23
TC 23
ISO/DIS 3776-2
Tractors and machinery for agriculture and forestry
*
Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements
2012-10-30
(Revision of ISO 3776-2:2007)
TC 24
Particle characterization including sieving
ISO/DIS 12154
*
Determination of density by volumetric displacement — Skeleton density by gas pycnometry
2012-10-05
ISO/DIS 20998-2
*
Measurement and characterization of particles by acoustic methods — Part 2: Guidelines for linear
theory
2012-10-05
TC 28
ISO/DIS 5163
Petroleum products and lubricants
*
Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor
method
2012-10-11
(Revision of ISO 5163:2005, ISO 5163:2005/Cor 1:2008)
ISO/DIS 5164
*
Petroleum products — Determination of knock characteristics of motor fuels — Research method
2012-10-11
(Revision of ISO 5164:2005)
TC 30
ISO/DIS 4064-3
Measurement of fluid flow in closed conduits
*
Water meters intended for the metering of cold potable water and hot water — Part 3: Test report
format
2012-10-04
(Revision of ISO 4064-3:2005)
ISO/DIS 4064-4
*
Water meters intended for the metering of cold potable water and hot water — Part 4: Non-metrological
requirements not covered in ISO 4064-1
2012-10-04
(Revision of ISO 4064-1:2005)
ISO/DIS 4064-5
*
Water meters intended for the metering of cold potable water and hot water — Part 5: Installation
requirements
(Revision of ISO 4064-2:2005)
TC 31
Tyres, rims and valves
2012-10-04
ISO
10231:2003/DAm
d1
*
TC 33
ISO/DIS 5017
Motorcycle tyres — Test methods for verifying tyre capabilities — Amendment 1
2012-10-24
Refractories
*
Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity
2012-10-03
(Revision of ISO 5017:1998)
TC 38
Textiles
ISO/DIS 16373-2
*
Textiles — Dyestuffs — Part 2: General method for the determination of extractable dyestuffs including
allergenic and carcinogenic substances
2012-10-04
ISO/DIS 20743
*
Textiles — Determination of antibacterial activity of textile products
2012-10-25
(Revision of ISO 20743:2007)
TC 39
ISO/DIS 14955-1
Machine tools
*
TC 42
ISO/DIS 15739
Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energyefficient machine tools
2012-10-01
Photography
*
Photography — Electronic still-picture imaging — Noise measurements
2012-10-10
(Revision of ISO 15739:2003)
TC 43
ISO/DIS 11200
Acoustics
*
Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards
for the determination of emission sound pressure levels at a work station and at other specified
positions
2012-10-25
(Revision of ISO 11200:1995, ISO 11200:1995/Cor 1:1997)
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part
1: Sound insulation
ISO/DIS 12999-1
2012-10-18
(Revision of ISO 140-2:1991, ISO 140-2:1991/Cor 1:1993)
ISO/DIS 16251-1
*
TC 44
ISO/DIS 5826
Acoustics — Laboratory measurement of the reduction of transmittedimpact noise by floor coverings on
a small floor mock-up — Part 1: Heavyweight compact floor
2012-10-04
Welding and allied processes
*
Resistance welding equipment — Transformers — General specifications applicable to all transformers
2012-11-01
(Revision of ISO 5826:1999)
ISO
9539:2010/DAmd
1
*
Gas welding equipment — Materials for equipment used in gas welding, cutting and allied processes —
Amendment 1
2012-10-25
ISO/DIS 5817
*
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) —
Quality levels for imperfections
2012-10-11
(Revision of ISO 5817:2003, ISO 5817:2003/Cor 1:2006)
TC 45
ISO/DIS 16565
Rubber and rubber products
*
Rubber — Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylenepropylene-diene (EPDM) terpolymers
2012-10-10
(Revision of ISO 16565:2008)
TC 58
ISO/DIS 10462
Gas cylinders
*
Gas cylinders — Acetylene cylinders — Periodic inspection and maintenance
(Revision of ISO 10462:2005)
2012-10-11
TC 63
Glass containers
ISO/DIS 12818
*
Glass packaging — Standard tolerances for flaconnage
2012-10-23
ISO/DIS 12821
*
Glass packaging — 26 H 180 crown finish — Dimensions
2012-10-23
ISO/DIS 12822
*
Glass packaging — 26 H 126 crown finish — Dimensions
2012-10-23
TC 67
ISO/DIS 19900
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
*
Petroleum and natural gas industries — General requirements for offshore structures
2012-10-04
(Revision of ISO 19900:2002)
TC 70
ISO/DIS 15619
Internal combustion engines
*
TC 85
Reciprocating internal combustion engines — Measurement method for exhaust silencers — Sound
power level of exhaust noise and insertion loss using sound pressure and power loss ratio
2012-10-17
Nuclear energy, nuclear technologies, and radiological protection
ISO/DIS 12749-2
*
Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological
protection
2012-10-21
ISO/DIS 3925
*
Unsealed radioactive substances — Identification and documentation
2012-10-28
(Revision of ISO 3925:1978)
TC 96
ISO/DIS 17440
Cranes
*
TC 106
ISO/DIS 17304
2012-10-21
Dentistry
*
TC 121
ISO/DIS 11197
Cranes — General Design — Limit states and proof of competence of forged steel hooks
Dentistry — Polymerisation shrinkage: Method for determination of polymerisation shrinkage of
polymer-based restorative materials
2012-10-29
Anaesthetic and respiratory equipment
*
Medical supply units
2012-11-01
(Revision of ISO 11197:2004)
TC 122
ISO/DIS 16495.2
Packaging
*
TC 138
Packaging — Transport packaging for dangerous goods — Test methods
2012-07-04
Plastics pipes, fittings and valves for the transport of fluids
ISO/DIS 11297-1
*
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure
— Part 1: General
2012-10-18
ISO/DIS 11297-3
*
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure
— Part 3: Lining with close-fit pipes
2012-10-18
TC 142
ISO/DIS 10121-1
Cleaning equipment for air and other gases
*
TC 154
ISO/DIS 17369
Test method for assessing the performance of gas-phase air cleaning media and devices for general
ventilation — Part 1: Gas-phase air cleaning media
2012-10-04
Processes, data elements and documents in commerce, industry and administration
*
Statistical data and metadata exchange (SDMX)
2012-10-05
(Revision of ISO/TS 17369:2005)
TC 157
Non-systemic contraceptives and STI barrier prophylactics
ISO/DIS 4074
Natural rubber latex male condoms — Requirements and test methods
(Revision of ISO 4074:2002, ISO 4074:2002/Cor 1:2003, ISO 4074:2002/Cor 2:2008)
2012-10-18
TC 176
Quality management and quality assurance
ISO/DIS 10008
Quality Management - Customer satisfaction - Guidelines for business-to-consumer electronic
commerce transactions
TC 178
Lifts, escalators and moving walks
ISO/DIS 22559-1
*
Safety requirements for lifts (elevators) — Part 1: Global essential safety requirements (GESRs)
2012-10-19
2012-10-16
(Revision of ISO/TS 22559-1:2004)
TC 190
Soil quality
ISO/DIS 13876
*
Soil quality — Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass
selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
2012-10-21
ISO/DIS 13913
*
Soil quality — Determination of selected phthalates using capillary gas chromatography with mass
spectrometric detection (GC/MS)
2012-10-24
ISO/DIS 16729
*
Soil quality — Digestion of nitric acid soluble fractions of elements
2012-10-17
TC 197
Hydrogen technologies
ISO/DIS 14687-3
Hydrogen fuel — Product specification — Part 3: Proton exchange membrane (PEM) fuel cell
applications for stationary appliances
TC 198
Sterilization of health care products
2012-11-01
ISO 111371:2006/DAmd 1
*
Sterilization of health care products — Radiation — Part 1: Requirements for development, validation
and routine control of a sterilization process for medical devices — Amendment 1
2012-10-04
ISO 158831:2006/DAmd 1
*
Washer-disinfectors — Part 1: General requirements, terms and definitions and tests — Amendment 1
2012-10-04
TC 201
ISO/DIS 16531
Surface chemical analysis
*
TC 202
ISO/DIS 15932
2012-10-15
Microbeam analysis
*
TC 204
ISO/DIS 15638-7
Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated
measurement of current or current density for depth profiling in AES and XPS
Microbeam analysis — Analytical electron microscopy — Vocabulary
2012-10-23
Intelligent transport systems
*
TC 205
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated
commercial freight Vehicles (TARV) — Part 7: Other applications
2012-10-16
Building environment design
ISO/DIS 13612-1
*
Heating and cooling systems in buildings — Method for calculation of the system performance and
system design for heat pump systems — Part 1: Design and dimensioning
2012-10-08
ISO/DIS 13612-2
*
Heating and cooling systems in buildings — Method for calculation of the system performance and
system design for heat pump systems — Part 2: Energy calculation
2012-10-08
TC 206
Fine ceramics
ISO/DIS 14544
*
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic
composites at high temperature - Determination of compression properties
2012-10-23
ISO/DIS 14574
*
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic
composites at high temperature - Determination of tensile properties
2012-10-23
TC 213
ISO/DIS 103608.2
Dimensional and geometrical product specifications and verification
*
TC 244
ISO/DIS 13574
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate
measuring machines (CMM) — Part 8: CMMs with optical distance sensors
2012-07-25
Industrial furnaces and associated processing equipment
*
Industrial furnaces and associated processing equipment — Vocabulary
2012-10-03
TMB
Technical Management Board
ISO/DIS 8007936
Explosive atmospheres — Part 36: Non-electrical equipment for use in explosive atmospheres — Basic
methods and requirements
2012-11-03
ISO/DIS 8007937
Explosive atmospheres — Part 37: Non-electrical equipment for use in explosive atmospheres — Nonelectrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'
2012-11-03
ISO/IEC DIS
80079-38
Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in
underground mines
2012-11-03
JTC 1
Information technology
ISO/IEC DIS
20005
Information technology — Sensor networks — Services and interfaces supporting collaborative
information processing in intelligent sensor networks
2012-10-16
ISO/IEC DIS
29182-1
Information technology — Sensor networks: Sensor network reference architecture (SNRA) — Part 1:
General overview and requirements
2012-10-16
ISO/IEC DIS
29182-2
Information technology — Sensor networks: Sensor network reference architecture (SNRA) — Part 2:
Vocabulary and terminology
2012-10-25
ISO/IEC DIS
18026
Information technology — Spatial Reference Model (SRM)
2012-10-12
(Revision of ISO/IEC 18026:2009)
ISO/IEC DIS
27000
Information technology — Security techniques — Information security management systems —
Overview and vocabulary
2012-10-26
(Revision of ISO/IEC 27000:2009)
ISO/IEC DIS
29191
Information technology — Security techniques — Requirements for partially anonymous, partially
unlinkable authentication.
2012-10-23
ISO/IEC 138182/DAmd 1
Information technology — Generic coding of moving pictures and associated audio information: Video
— Part 2: Amendment 1: Frame packing arrangement signalling for quincunx pattern — Amendment 1:
Extension to MPEG2-Video frame packing arrangement type to signal use of side by side with quincunx
2012-10-15
ISO/IEC 1449610:2012/DAmd 1
Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding —
Amendment 1: Additional profiles and supplemental enhancement information (SEI) messages
2012-10-12
ISO/IEC 210003:2003/DAmd 2
Information technology — Multimedia framework (MPEG-21) — Part 3: Digital Item Identification —
Amendment 2: Digital item semantic relationships
2012-10-12
ISO/IEC 230014:2011/DAmd 1
Information technology — MPEG systems technologies — Part 4: Codec configuration representation
— Amendment 1: RVC-CAL extensions
2012-10-12
ISO/IEC DIS
24769-2
Information technology — Real-time locating system (RTLS) device conformance test methods — Part
2: Test methods for air interface communication at 2,4 GHz
2012-10-16
ISO/IEC 238236:2008/DAmd 1
Information technology — Vocabulary — Part 36: Learning, education and training — Amendment 1
2012-10-12
FDIS circulated
Period from 01 May to 31 May 2012
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 2
ISO/FDIS 4161
Fasteners
*
Hexagon nuts with flange, style 2 — Coarse thread
2012-07-19
(Revision of ISO 4161:1999)
ISO/FDIS 7043
*
Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A
and B
2012-07-19
(Revision of ISO 7043:1997)
ISO/FDIS 7044
*
Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B
2012-07-19
(Revision of ISO 7044:1997)
ISO/FDIS 10663
*
Hexagon nuts with flange, style 2 — Fine pitch thread
2012-07-19
(Revision of ISO 10663:1999)
ISO/FDIS 12125
*
Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread,
style 2 — Product grades A and B
2012-07-19
(Revision of ISO 12125:1997)
ISO/FDIS 12126
*
Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 —
Product grades A and B
2012-07-19
(Revision of ISO 12126:1997)
ISO
16047:2005/FDA
md 1
*
TC 8
ISO/FDIS 130731
Fasteners — Torque/clamp force testing — Amendment 1
2012-08-25
Ships and marine technology
*
TC 10
Ships and marine technology - Risk assessment on anti-fouling systems on ships — Part 1: Marine
environmental risk assement method of biocidally active substances used for anti-fouling systems on
ships
2012-07-12
Technical product documentation
IEC/FDIS 820791
*
Preparation of instructions for use — Structuring, content and presentation — Part 1: General
principles and detailed requirements
2012-06-25
ISO/FDIS 13444
*
Technical product documentation (TPD) — Dimensioning and indication of knurling
2012-07-17
TC 17
ISO/FDIS 5001
Steel
*
Cold-reduced carbon steel sheet for vitreous enamelling
2012-07-12
(Revision of ISO 5001:2007)
ISO/FDIS 16162
*
Cold-rolled steel sheet products — Dimensional and shape tolerances
2012-07-29
(Revision of ISO 16162:2010)
ISO/FDIS 16163
*
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
2012-07-29
(Revision of ISO 16163:2010)
ISO/FDIS 156981
*
Steel for the reinforcement of concrete — Headed bars — Part 1: Requirements
2012-07-31
ISO/FDIS 156982
*
Steel for the reinforcement of concrete — Headed bars — Part 2: Test methods
2012-07-31
TC 28
Petroleum products and lubricants
ISO/FDIS 8217
Petroleum products — Fuels (class F) — Specifications of marine fuels
2012-07-26
(Revision of ISO 8217:2010, ISO 8217:2010/Cor 1:2011)
TC 29
ISO/FDIS 5608
Small tools
*
Turning and copying tool holders and cartridges for indexable inserts — Designation
2012-07-22
(Revision of ISO 5608:1995)
TC 31
ISO/FDIS 4209-2
Tyres, rims and valves
*
Truck and bus tyres and rims (metric series) — Part 2: Rims
2012-07-15
(Revision of ISO 4209-2:2001)
TC 33
ISO/FDIS 1927-1
Refractories
*
Monolithic (unshaped) refractory products — Part 1: Introduction and classification
2012-07-04
(Revision of ISO 1927:1984)
TC 34
ISO/FDIS 11747
Food products
*
TC 35
Rice — Determination of rice kernel resistance to extrusion after cooking
2012-07-11
Paints and varnishes
ISO/FDIS 9117-4
*
Paints and varnishes — Drying tests — Part 4: Test using a mechanical recorder
2012-07-18
ISO/FDIS 9117-5
*
Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test
2012-07-18
ISO/FDIS 13129
*
Paints and varnishes — Electrochemical measurement of the protection provided to steel by paint
coatings — Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC
transient (DCT) measurements
2012-08-01
TC 38
ISO/FDIS 1140
Textiles
*
Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes
2012-07-11
(Revision of ISO 1140:2004)
ISO/FDIS 1141
*
Fibre ropes — Polyester — 3-, 4-, 8- and 12-strand ropes
2012-07-11
(Revision of ISO 1141:2004)
ISO/FDIS 1346
*
Fibre ropes — Polypropylene split film, monofilament and multifilament (PP2) and polypropylene hightenacity multifilament (PP3) — 3-, 4-, 8- and 12-strand ropes
2012-07-11
(Revision of ISO 1346:2004)
ISO/FDIS 13029
*
Textiles — Determination of drying rate in dynamic state by the modified sweating-guarded hotplate
2012-07-29
ISO/FDIS 136291
*
Textiles — Determination of antifungal activity of textile products — Part 1: Luminescence method
2012-07-17
TC 45
ISO/FDIS 4656
Rubber and rubber products
*
Rubber compounding ingredients — Carbon black — Determination of oil absorption number (OAN)
and oil absorption number of compressed sample (COAN)
2012-07-04
(Revision of ISO 4656:2007)
TC 54
ISO/FDIS 3517
Essential oils
*
Essential oil of neroli (Citrus aurantium L., syn. Citrus amara Link, syn. Citrus bigaradia Loisel, syn.
Citrus vulgaris Risso)
2012-07-04
(Revision of ISO 3517:2002)
TC 58
ISO/FDIS 7866.2
Gas cylinders
*
Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and
testing
2012-07-04
(Revision of ISO 7866:1999)
ISO/FDIS 111191
*
Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing —
Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
2012-07-15
(Revision of ISO 11119-1:2002)
ISO/FDIS 111192
*
Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing —
Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing
metal liners
2012-07-08
(Revision of ISO 11119-2:2002)
TC 61
Plastics
ISO/FDIS 124181
*
Plastics — Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates — Part 1: Designation
system and basis for specifications
2012-07-16
ISO/FDIS 124182
*
Plastics — Post-consumer poly(ethylene terephthalate) (PET) bottle reyclates — Part 2: Preparation
of test specimens and determination of properties
2012-07-16
ISO/FDIS 1922
*
Rigid cellular plastics — Determination of shear strength
2012-07-17
(Revision of ISO 1922:2001)
TC 70
ISO/FDIS 8178-9
Internal combustion engines
*
Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles
and test procedures for test bed measurement of exhaust gas smoke emissions from compression
ignition engines operating under transient conditions
2012-07-09
(Revision of ISO 8178-9:2000, ISO 8178-9:2000/Amd 1:2004)
TC 71
ISO/FDIS 16204
Concrete, reinforced concrete and pre-stressed concrete
*
TC 84
ISO/FDIS 23907
*
*
*
*
*
*
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of viscoelastic materials — Part 1: Principles and guidelines
Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on
operator trucks and variable-reach trucks up to and including 10 t capacity
Hydrometry — Methods for assessment of reservoir sedimentation
*
Hand-held non-electric power tools — Safety requirements — Part 7: Grinders
2012-07-23
2012-07-12
2012-07-12
2012-07-25
Powder metallurgy
*
Sintered metal materials — Specifications
(Revision of ISO 5755:2001)
TC 123
2012-07-30
Compressors and pneumatic tools, machines and equipment
TC 119
ISO/FDIS 5755
Refrigeration systems and heat pumps — Flexible pipe elements, vibration isolators, expansion joints
and non-metallic tubes — Requirements and classification
Hydrometry
TC 118
ISO/FDIS 111487
2012-07-11
Industrial trucks
TC 113
ISO/FDIS 6421
Reference radiation fields for radiation protection — Definitions and fundamental concepts
Mechanical vibration, shock and condition monitoring
TC 110
ISO/FDIS 135641.2
2012-08-01
Refrigeration and air-conditioning
TC 108
ISO/FDIS 184371
Sharps injury protection — Requirements and test methods — Sharps containers
Nuclear energy, nuclear technologies, and radiological protection
TC 86
ISO/FDIS 13971
2012-07-23
Devices for administration of medicinal products and intravascular catheters
TC 85
ISO/FDIS 29661
Durability — Service life design of concrete structures
Plain bearings
2012-08-01
ISO/FDIS 13939
*
TC 131
ISO/FDIS 1219-2
Foil bearings — Guidelines for testing of the performance of foil journal bearings --Testing of load
capacity, friction coefficient and lifetime
2012-07-12
Fluid power systems
*
Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit
diagrams
2012-07-29
(Revision of ISO 1219-2:1995)
ISO/FDIS 6953-3
*
TC 146
ISO/FDIS 1600026
2012-07-12
Air quality
*
TC 147
ISO/FDIS 5814
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 3:
Alternative test methods for measuring the flow-rate characteristics of pressure regulators
Indoor air — Part 26: Sampling strategy for carbon dioxide (CO2)
2012-07-18
Water quality
*
Water quality — Determination of dissolved oxygen — Electrochemical probe method
2012-07-04
(Revision of ISO 5814:1990)
TC 150
ISO/FDIS 147082
Implants for surgery
*
Implants for surgery — Active implantable medical devices — Part 2: Cardiac pacemakers
2012-07-15
(Revision of ISO 14708-2:2005)
TC 161
ISO/FDIS 235511
Control and protective devices for gas and/or oil burners and appliances
*
Safety and control devices for gas burners and gas-burning appliances — Particular requirements —
Part 1: Automatic and semi-automatic valves
2012-07-17
(Revision of ISO 23551-1:2006)
TC 164
ISO/FDIS 12107
Mechanical testing of metals
*
Metallic materials — Fatigue testing — Statistical planning and analysis of data
2012-07-23
(Revision of ISO 12107:2003)
ISO/FDIS 12108
*
Metallic materials — Fatigue testing — Fatigue crack growth method
2012-07-23
(Revision of ISO 12108:2002)
TC 172
ISO/FDIS 13666
Optics and photonics
*
Ophthalmic optics — Spectacle lenses — Vocabulary
2012-08-04
(Revision of ISO 13666:1998, ISO 13666:1998/DAmd 1.2)
TC 182
Geotechnics
ISO/FDIS 224761
*
Geotechnical investigation and testing — Field testing — Part 1: Electrical cone and piezocone
penetration test
2012-09-01
ISO/FDIS 224765
*
Geotechnical investigation and testing — Field testing — Part 5: Flexible dilatometer test
2012-08-25
ISO/FDIS 224767
*
Geotechnical investigation and testing — Field testing — Part 7: Borehole jack test
2012-08-25
TC 184
ISO/FDIS 184352
TC 190
Automation systems and integration
*
Industrial automation systems and integration — Diagnostics, capability assessment and
maintenance applications integration — Part 2: Descriptions and definitions of application domain
matrix elements
Soil quality
2012-07-24
ISO/FDIS 14238
*
Soil quality — Biological methods — Determination of nitrogen mineralization and nitrification in soils
and the influence of chemicals on these processes
2012-07-22
(Revision of ISO 14238:1997)
TC 197
ISO/FDIS 17268
Hydrogen technologies
*
Gaseous hydrogen land vehicle refuelling connection devices
2012-07-15
(Revision of ISO 17268:2006)
TC 198
ISO/FDIS 134087
Sterilization of health care products
*
TC 202
ISO/FDIS 15632
Aseptic processing of health care products — Part 7: Alternative processes for atypical medical
devices and combination products
2012-07-15
Microbeam analysis
*
Microbeam analysis — Instrumental performance parameters for the specification and checking of
energy-dispersive X-ray spectrometers for use in electron probe microanalysis
2012-07-12
(Revision of ISO 15632:2002)
ISO/FDIS 16592
*
Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content
of steels using a calibration curve method
2012-07-22
(Revision of ISO 16592:2006)
TC 204
ISO/FDIS 17263
Intelligent transport systems
*
Intelligent transport systems — Automatic vehicle and equipment identification — System parameters
2012-07-11
(Revision of ISO/TS 17263:2003)
TC 209
ISO/FDIS 146449.2
Cleanrooms and associated controlled environments
*
TC 213
ISO/FDIS 5436-2
Cleanrooms and associated controlled environments — Part 9: Classification of surface cleanliness
by particle concentration
2012-07-25
Dimensional and geometrical product specifications and verification
*
Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards
— Part 2: Software measurement standards
2012-07-25
(Revision of ISO 5436-2:2001, ISO 5436-2:2001/Cor 1:2006, ISO 5436-2:2001/Cor 2:2008)
TC 215
ISO/IEEE FDIS
11073-10406
Health informatics
*
TC 218
ISO/FDIS 16415
2012-11-01
Timber
*
TC 219
ISO/FDIS
11638.2
Health informatics — Personal health device communication — Part 10406: Device specialization —
Basic electrocardiograph (ECG) (1- to 3-lead ECG)
Non-structural timber grading requirements
2012-07-15
Floor coverings
*
TC 221
Resilient floor coverings — Heterogeneous poly(vinyl chloride) flooring on foam — Specification
2012-07-23
Geosynthetics
ISO/FDIS 10772
*
Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow
conditions
2012-07-25
ISO/FDIS 10776
*
Geotextiles and geotextile-related products — Determination of water permeability characteristics
normal to the plane, under load
2012-07-18
IULTCS
ISO/FDIS 17131
CASCO
International Union of Leather Technologists and Chemists Societies
*
Leather - Identification of leather with microscopy
Committee on conformity assessment
2012-07-25
ISO/IEC FDIS
17065
*
Conformity assessment — Requirements for bodies certifying products, processes and services
2012-07-18
(Revision of ISO/IEC Guide 65:1996)
JTC 1
ISO/IEC/IEEE
FDIS 8802-11
Information technology
*
Information technology — Telecommunications and information exchange between systems — Local
and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access
control (MAC) and physical layer (PHY) specifications
2012-10-19
(Revision of ISO/IEC 8802-11:2005, ISO/IEC 8802-11:2005/Amd 6:2006, ISO/IEC 8802-11:2005/Amd
4:2006, ISO/IEC 8802-11:2005/Amd 5:2006)
ISO/IEC 144432:2010/FDAmd 2
*
Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2: Radio
frequency power and signal interface — Amendment 2: Additional PICC classes
2012-07-16
ISO/IEC 144963:2009/FDAmd 3
*
Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 3: Transport
of unified speech and audio coding (USAC)
2012-07-12
ISO/IEC FDIS
29174-2
*
Information technology — UII scheme and encoding format for Mobile AIDC services — Part 2:
Registration procedures
2012-07-15
(Revision of ISO/IEC CD 29174)
ISO/IEC 99957:2009/FDAmd 1
*
Information technology — Keyboard layouts for text and office systems — Part 7: Symbols used to
represent functions — Amendment 1
2012-07-17
ISO/IEC FDIS
29120-1
*
Information technology — Machine readable test data for biometric testing and reporting — Part 1:
Test reports
2012-07-25
Standards published
New International Standards published between 01 May and 31 May 2012
* Available in English only
** French version of standard previously published in English only
Price group
TC 2
Fasteners
ISO 898-5:2012
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and
similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread
ISO 7041:2012
* Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12
ISO 10509:2012
Hexagon flange head tapping screws
TC 4
Rolling bearings
ISO 10285:2007/Amd
1:2012
Rolling bearings — Sleeve type linear ball bearings — Boundary dimensions and tolerances —
Amendment 1
TC 6
Paper, board and pulps
H
B
C
XZ
ISO 1974:2012
Paper — Determination of tearing resistance — Elmendorf method
TC 8
Ships and marine technology
G
ISO 30005:2012
* Ships and marine technology — Ship recycling management systems — Information control for
hazardous materials in the manufacturing chain of shipbuilding and ship operations
M
ISO 11347:2012
Ships and marine technology — Large yachts — Measurement and assessment of the visual
appearance of coatings
M
TC 10
Technical product documentation
ISO 6433:2012
Technical product documentation — Part references
TC 17
Steel
C
ISO 630-3:2012
* Structural steels — Part 3: Technical delivery conditions for fine-grain structural steels
J
ISO 630-4:2012
* Structural steels — Part 4: Technical delivery conditions for high-yield-strength quenched and
tempered structural steel plates
H
TC 21
Equipment for fire protection and fire fighting
ISO 7240-10:2012
* Fire detection and alarm systems — Part 10: Point-type flame detectors
Q
ISO 7076-1:2012
* Fire protection - Foam fire extinguishing systems — Part 1: Foam proportioning equipment
E
ISO 7076-2:2012
* Fire protection - Foam fire extinguishing systems — Part 2: Low expansion foam equipment
F
TC 22
Road vehicles
ISO 11452-9:2012
* Road vehicles — Component test methods for electrical disturbances from narrowband radiated
electromagnetic energy — Part 9: Portable transmitters
T
ISO 13296:2012
* Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and
dimensions
F
ISO 13044-1:2012
* Road vehicles — 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle
combinations — Part 1: General requirements and definitions
C
ISO 4106:2012
* Motorcycles — Engine test code — Net power
M
TC 27
ISO/TS 13605:2012
Solid mineral fuels
* Solid mineral fuels — Major and minor elements in hard coal ash and coke ash — Wavelength
dispersive X-ray fluorescence spectrometric method
H
TC 29
Small tools
ISO 666:2012
Machine tools — Mounting of grinding wheels by means of hub flanges
TC 34
Food products
ISO 15163:2012
Milk and milk products — Calf rennet and adult bovine rennet — Determination by chromatography of
chymosin and bovine pepsin contents
K
ISO 15174:2012
Milk and milk products — Microbial coagulants — Determination of total milk-clotting activity
E
ISO/TS 17193:2011
Milk — Determination of the lactoperoxidase activity — Photometric method (Reference method)
C
ISO 7513:1990/Amd
1:2012
* Instant tea in solid form — Determination of moisture content (loss in mass at 103 degrees C) —
Amendment 1
XZ
ISO 24115:2012
* Green coffee — Procedure for calibration of moisture meters — Routine method
TC 37
Terminology and other language and content resources
ISO/TS 11669:2012
Translation projects — General guidance
H
H
Q
TC 39
ISO 26303:2012
Machine tools
* Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine
tools
TC 41
Pulleys and belts (including veebelts)
ISO 5296:2012
Synchronous belt drives — Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH — Metric and
inch dimensions
TC 42
Photography
S
F
ISO 18913:2012
* Imaging materials — Permanence — Vocabulary
L
ISO 18926:2012
* Imaging materials — Information stored on magneto-optical (MO) discs — Method for estimating the
life expectancy based on the effects of temperature and relative humidity
L
ISO 18933:2012
* Imaging materials — Magnetic tape — Care and handling practices for extended usage
M
ISO 20462-3:2012
* Photography — Psychophysical experimental methods for estimating image quality — Part 3: Quality
ruler method
M
TC 43
ISO 17497-2:2012
Acoustics
* Acoustics — Sound-scattering properties of surfaces — Part 2: Measurement of the directional
diffusion coefficient in a free field
H
TC 44
Welding and allied processes
ISO 16834:2012
Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of
high strength steels — Classification
G
ISO 21952:2012
Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of
creep-resisting steels — Classification
G
ISO 24598:2012
Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux
combinations for submerged arc welding of creep-resisting steels — Classification
J
ISO 22825:2012
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and
nickel-based alloys
L
TC 45
Rubber and rubber products
ISO 2782-1:2012
Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differentialpressure methods
G
ISO 2782-2:2012
Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 2: Equalpressure method
D
ISO 2951:2012
* Rubber, vulcanized or thermoplastic — Determination of insulation resistance
ISO 21461:2012
Rubber — Determination of the aromaticity of oil in vulcanized rubber compounds
TC 46
Information and documentation
ISO 23081-1:2006
Information and documentation — Records management processes — Metadata for records — Part
1: Principles
TC 59
Buildings and civil engineering works
ISO 15686-2:2012
Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures
TC 61
Plastics
ISO 1183-1:2012
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method,
liquid pyknometer method and titration method
ISO 13975:2012
ISO 17088:2012
* Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled
slurry digestion systems — Method by measurement of biogas production
Specifications for compostable plastics
D
K
K
M
E
G
D
ISO 11833-1:2012
Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part
1: Sheets of thickness not less than 1 mm
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
ISO/TS 29001:2010
Petroleum, petrochemical and natural gas industries — Sector-specific quality management systems
— Requirements for product and service supply organizations
P
ISO 14723:2009
Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves
W
ISO 13500:2008/Amd
1:2010
Petroleum and natural gas industries — Drilling fluid materials — Specifications and tests —
Amendment 1: Barite 4,1
ISO 13503-1:2011
Petroleum and natural gas industries — Completion fluids and materials — Part 1: Measurement of
viscous properties of completion fluids
TC 68
Financial services
ISO 17442:2012
* Financial services — Legal Entity Identifier (LEI)
G
XZ
K
C
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical
and pharmaceutical use
ISO 1135-4:2012
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
H
ISO 11040-6:2012
Prefilled syringes — Part 6: Plastic barrels for injectables
E
TC 79
Light metals and their alloys
ISO 13092:2012
TC 92
ISO 14934-3:2012
* Titanium and titanium alloys — Titanium sponge
Fire safety
* Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
ISO/TR 26368:2012
Environmental damage limitation from fire-fighting water run-off
TC 94
Personal safety -- Protective clothing and equipment
ISO 4007:2012
A
* Personal protective equipment — Eye and face protection — Vocabulary
TC 106
Dentistry
ISO 6876:2012
Dentistry — Root canal sealing materials
TC 108
Mechanical vibration, shock and condition monitoring
H
M
XA
E
ISO 21940-23:2012
* Mechanical vibration — Rotor balancing — Part 23: Enclosures and other protective measures for the
measuring station of balancing machines
L
ISO 13379-1:2012
Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques
— Part 1: General guidelines
Q
TC 110
Industrial trucks
ISO/TS 3691-8:2012
Industrial trucks — Safety requirements and verification — Part 8: Regional requirements for
countries outside the European Community
TC 113
Hydrometry
ISO/TR 24578:2012
TC 120
ISO 11398:2012
TC 126
* Hydrometry — Acoustic Doppler profiler — Method and application for measurement of flow in open
channels
D
S
Leather
* Raw ostrich skins — Description of defects, guidelines for presentation and grading on basis of
defects
Tobacco and tobacco products
C
ISO 15152:2003/Amd
1:2012
Tobacco — Determination of the content of total alkaloids as nicotine — Continuous-flow analysis
method — Amendment 1: .
XZ
ISO 15153:2003/Amd
1:2012
Tobacco — Determination of the content of reducing substances — Continuous-flow analysis method
— Amendment 1: .
XZ
ISO 15154:2003/Amd
1:2012
Tobacco — Determination of the content of reducing carbohydrates — Continuous-flow analysis
method — Amendment 1: .
XZ
ISO 15517:2003/Amd
1:2012
Tobacco — Determination of nitrate content — Continuous-flow analysis method — Amendment 1: .
XZ
TC 131
Fluid power systems
ISO 1219-1:2012
TC 145
ISO 7000:2012
* Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical
symbols for conventional use and data-processing applications
Graphical symbols
* Graphical symbols for use on equipment — Registered symbols
TC 146
Air quality
ISO 16000-19:2012
Indoor air — Part 19: Sampling strategy for moulds
TC 147
Water quality
ISO 11350:2012
TC 150
XC
* Water quality — Determination of the genotoxicity of water and waste water — Salmonella/microsome
fluctuation test (Ames fluctuation test)
free
N
R
Implants for surgery
ISO 11658:2012
* Cardiovascular implants and extracorporeal systems — Blood/tissue contact surface modifications for
extracorporeal perfusion systems
C
ISO 9714-1:2012
* Orthopaedic drilling instruments — Part 1: Drill bits, taps and countersink cutters
D
TC 156
Corrosion of metals and alloys
ISO 9227:2012
Corrosion tests in artificial atmospheres — Salt spray tests
TC 160
Glass in building
ISO 125436:2011/Cor 1:2012
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance — Technical
Corrigendum 1
TC 163
Thermal performance and energy use in the built environment
K
free
ISO 16534:2012
* Thermal insulating products for building applications — Determination of compressive creep
H
ISO 16535:2012
* Thermal insulating products for building applications — Determination of long-term water absorption
by immersion
E
ISO 16536:2012
* Thermal insulating products for building applications — Determination of long-term water absorption
by diffusion
C
ISO 16537:2012
* Thermal insulating products for building applications — Determination of shear behaviour
E
ISO 16544:2012
* Thermal insulating products for building applications — Conditioning to moisture equilibrium under
specified temperature and humidity conditions
G
ISO 16545:2012
* Thermal insulating products for building applications — Determination of behaviour under cyclic
loading
D
ISO 16546:2012
* Thermal insulating products for building applications — Determination of freeze-thaw resistance
C
TC 172
Optics and photonics
ISO 8578:2012
* Microscopes — Marking of objectives and eyepieces
B
ISO 17123-4:2012
* Optics and optical instruments — Field procedures for testing geodetic and surveying instruments —
L
Part 4: Electro-optical distance meters (EDM measurements to reflectors)
ISO 19980:2012
* Ophthalmic instruments — Corneal topographers
L
TC 193
Natural gas
ISO 6974-1:2012
Natural gas — Determination of composition and associated uncertainty by gas chromatography —
Part 1: General guidelines and calculation of composition
S
ISO 6974-2:2012
Natural gas — Determination of composition and associated uncertainty by gas chromatography —
Part 2: Uncertainty calculations
H
TC 199
Safety of machinery
ISO/TR 141212:2012
TC 204
ISO/TR 131851:2012
* Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods
R
Intelligent transport systems
* Intelligent transport systems — Vehicle interface for provisioning and support of ITS services — Part
1: General information and use case definition
S
ISO 24534-1:2010
Automatic vehicle and equipment identification — Electronic registration identification (ERI) for
vehicles — Part 1: Architecture
D
ISO 24534-2:2010
Automatic vehicle and equipment identification — Electronic registration identification (ERI) for
vehicles — Part 2: Operational requirements
J
ISO 24534-3:2010
Automatic vehicle and equipment identification — Electronic registration identification (ERI) for
vehicles — Part 3: Vehicle data
P
ISO 24534-4:2010
Automatic vehicle and equipment identification — Electronic registration identification (ERI) for
vehicles — Part 4: Secure communications using asymmetrical techniques
X
* Intelligent transport systems — Freight land conveyance content identification and communication
(FLC-CIC) — Part 1: Context, architecture and referenced standards
W
ISO/TS 266831:2012
TC 206
ISO 23145-2:2012
Fine ceramics
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of
ceramic powders — Part 2: Untapped density
D
TC 207
Environmental management
ISO 14045:2012
Environmental management — Eco-efficiency assessment of product systems — Principles,
requirements and guidelines
R
ISO/TR 14047:2012
Environmental management — Life cycle assessment — Illustrative examples on how to apply ISO
14044 to impact assessment situations
X
ISO/TR 14049:2012
Environmental management — Life cycle assessment — Illustrative examples on how to apply ISO
14044 to goal and scope definition and inventory analysis
T
TC 211
Geographic information/Geomatics
ISO 19148:2012
Geographic information — Linear referencing
TC 215
Health informatics
ISO 21090:2011
Health informatics — Harmonized data types for information interchange
TC 217
Cosmetics
ISO 24443:2012
Determination of sunscreen UVA photoprotection in vitro
TC 220
Cryogenic vessels
ISO 21013-4:2012
TC 223
* Cryogenic vessels — Pilot operated pressure relief devices — Part 4: Pressure-relief accessories for
cryogenic service
Societal security
X
XC
N
E
ISO 22300:2012
* Societal security — Terminology
F
ISO 22301:2012
* Societal security — Business continuity management systems --- Requirements
M
ISO 22320:2011
Societal security — Emergency management — Requirements for incident response
TC 225
Market, opinion and social research
ISO 20252:2012
Market, opinion and social research — Vocabulary and service requirements
TC 229
Nanotechnologies
ISO/TS 10797:2012
Nanotechnologies — Characterization of single-wall carbon nanotubes using transmission electron
microscopy
ISO/TR 13014:2012
* Nanotechnologies - Guidance on physico-chemical characterization of engineered nanoscale
materials for toxicologic assessment
TC 246
Project committee: Anti-counterfeiting tools
ISO 12931:2012
Performance criteria for authentication solutions used to combat counterfeiting of material goods
JTC 1
Information technology
L
R
Q
Q
N
ISO/IEC 10646:2012
* Information technology — Universal Coded Character Set (UCS)
ISO/IEC 9834-1:2012
* Information technology — Procedures for the operation of object identifier registration authorities:
General procedures and top arcs of the international object identifier tree — Part 1:
ISO/IEC 180231:2006/Amd 1:2012
* Information technology — SEDRIS — Part 1: Functional specification — Amendment 1
XZ
ISO/IEC 180233:2006/Amd 1:2012
* Information technology — SEDRIS — Part 3: Transmittal format binary encoding — Amendment 1
XZ
ISO/IEC 180244:2006/Amd 1:2012
* Information technology — SEDRIS language bindings — Part 4: C — Amendment 1
XZ
ISO/IEC 291921:2012
* Information technology — Security techniques — Lightweight cryptography — Part 1: General
G
ISO/IEC 159389:2005/Amd 1:2012
* Information technology — Multimedia content description interface — Part 9: Profiles and levels —
Amendment 1: Extensions to profiles and levels
T
ISO/IEC 247302:2012
* Information technology — Real time locating systems (RTLS) — Part 2: Direct Sequence Spread
Spectrum (DSSS) 2,4 GHz air interface protocol
C
ISO/IEC 2473021:2012
* Information technology — Real time locating systems (RTLS) — Part 21: Direct Sequence Spread
Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with a single spread code
and employing a DBPSK data encoding and BPSK spreading scheme
P
ISO/IEC 2473022:2012
* Information technology — Real time locating systems (RTLS) — Part 22: Direct Sequence Spread
Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with multiple spread codes
and employing a QPSK data encoding and Walsh offset QPSK (WOQPSK) spreading scheme
K
ISO/IEC 29160:2012
* Information technology — Radio frequency identification for item management — RFID Emblem
K
ISO/IEC 16680:2012
* Information technology — The Open Group Service Integration Maturity Model (OSIMM)
W
XC
M
Standards confirmed
The following International Standards are confimred for a five year period:
TC 4
Rolling bearings
ISO 10317:2008
TC 6
Paper, board and pulps
ISO 1924-2:2008
ISO 5630-1:1991
(reconfirmed)
ISO 5630-3:1996
(reconfirmed)
ISO 5630-4:1986
(reconfirmed)
ISO 5630-5:2008
ISO 8787:1986
(reconfirmed)
ISO 9895:2008
ISO 16532-1:2008
TC 10
Technical product documentation
ISO 15786:2008
TC 22
Road vehicles
ISO 3984:2004
(reconfirmed)
ISO 13215-2:1999
(reconfirmed)
ISO 13215-3:1999
(reconfirmed)
ISO/PAS 13396:2009
ISO/TS 22239-1:2009
ISO/TS 22239-2:2009
ISO/TS 22239-3:2009
ISO/TS 29062:2009
ISO 9259:1991
(reconfirmed)
TC 34
Food products
ISO 9832:2002
TC 54
Essential oils
ISO 7660:1983
(reconfirmed)
TC 59
Buildings and civil engineering works
ISO 12006-3:2007
ISO 22263:2008
TC 68
Financial services
ISO 22307:2008
TC 83
Sports and recreational equipment
ISO 6005:1991
(reconfirmed)
TC 96
Cranes
ISO 7296-1:1991
(reconfirmed)
TC 122
Packaging
ISO 8474:1986
(reconfirmed)
TC 185
Safety devices for protection against excessive pressure
ISO 4126-10:2010
Standards withdrawn
Period from 01 May to 31 May 2012
TC 8
Ships and marine technology
ISO/PAS 30005:2010
(replaced by ISO 30005:2012)
TC 17
Steel
ISO 630:1995
(replaced by ISO 630-1:2011, ISO 630-2:2011, ISO 630-3:2012, ISO 630-4:2012)
ISO 630:1995/Amd 1:2003
(replaced by ISO 630-1:2011, ISO 630-2:2011, ISO 630-3:2012, ISO 630-4:2012)
TC 41
Pulleys and belts (including veebelts)
ISO 5296-1:1989
(replaced by ISO 5296:2012)
ISO 5296-2:1989
(replaced by ISO 5296:2012)
TC 45
Rubber and rubber products
ISO 2782:2006
(replaced by ISO 2782-1:2012, ISO 2782-2:2012)
TC 108
Mechanical vibration, shock and condition monitoring
ISO 7475:2002
(replaced by ISO 21940-23:2012)
ISO 13379:2003
(replaced by ISO 13379-1:2012)
TMB
Technical Management Board
ISO Guide 72:2001
(replaced by )
JTC 1
Information technology
ISO/IEC 24730-2:2012
(replaced by ISO/IEC 24730-21:2012, ISO/IEC 24730-22:2012)
ISO/IEC 24730-2:2006
(replaced by ISO/IEC 24730-21:2012, ISO/IEC 24730-22:2012)
Meeting calendar
(update at 01 May 2012)
Meetings called for the month of June are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
July 2012
6
San Francisco
(USA)
TC 180
Solar energy
6
San Francisco
(USA)
TC 180/SC 4
Solar energy/Systems - Thermal performance, reliability and durability
9-10
Shanghai
(China)
TC 134
Fertilizers and soil conditioners
10-13
GeisenheimJohannisberg
(Germany)
JTC 2
Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology
16
Golden,
Colorado (USA)
TC 44/SC 10
Welding and allied processes/Unification of requirements in the field of metal welding
16-17
Paris (France)
JTC 1/SC 37
Information technology/Biometrics
18
Golden,
Colorado (USA)
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied processes
personnel
19
Berlin (Germany)
TC 261
Additive manufacturing
19-20
Golden,
Colorado (USA)
TC 44
Welding and allied processes
20
Lancaster (USA)
TC 43/SC 2
Acoustics/Building acoustics
21
Stockholm
(Sweden)
JTC 1/SC 29
Information technology/Coding of audio, picture, multimedia and hypermedia information
24-25
Beijing (China)
TC 255
Biogas
August 2012
22-24
Berlin (Germany)
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
24
Brussels
(Belgium)
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
27-31
Montreal
(Canada)
JTC 1/SC 35
Information technology/User interfaces
29
Berlin (Germany)
TC 79/SC 5
Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
September 2012
3-6
Stockholm
(Sweden)
TC 110/SC 2
Industrial trucks/Safety of powered industrial trucks
3-7
La Rochelle
(France)
TC 163
Thermal performance and energy use in the built environment
4-7
Zurich
(Switzerland)
TC 172/SC 5
Optics and photonics/Microscopes and endoscopes
5-7
La Rochelle
(France)
TC 205
Building environment design
7
Zurich
(Switzerland)
TC 142
Cleaning equipment for air and other gases
7-8
Gelendzhik
(Russian
Federation)
TC 20/SC 8
Aircraft and space vehicles/Aerospace terminology
8-16
Busan (Korea,
Republic of)
JTC 1/SC 36
Information technology/Information technology for learning, education and training
10
Milan (Italy)
TC 21/SC 2
Equipment for fire protection and fire fighting/Manually transportable fire extinguishers
10
Milan (Italy)
TC 21/SC 6
Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems
using foam and powder
10-11
Geneva
(Switzerland)
JTC 1/SC 22
Information technology/Programming languages, their environments and system software
interfaces
10-12
Milan (Italy)
TC 21/SC 5
Equipment for fire protection and fire fighting/Fixed firefighting systems using water
10-12
Moscow
(Russian
Federation)
TC 150/SC 1
Implants for surgery/Materials
10-12
Zibo city (China)
TC 206
Fine ceramics
10-12
Zurich
(Switzerland)
TC 209
Cleanrooms and associated controlled environments
10-14
Geneva
(Switzerland)
JTC 1/SC 25
Information technology/Interconnection of information technology equipment
10-14
Nancy (France)
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration
and shock
10-14
La Plaine StDenis (France)
TC 153/SC 1
Valves/Design, manufacture, marking and testing
10-14
Helsinki
(Finland)
TC 190
Soil quality
11
Moscow
(Russian
Federation)
TC 150/SC 5
Implants for surgery/Osteosynthesis and spinal devices
11
Moscow
(Russian
Federation)
TC 150/SC 7
Implants for surgery/Tissue-engineered medical products
14
Beijing (China)
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
17-18
San Diego (USA)
TMB
Technical Management Board
*
*
17-21
Seoul (Korea,
Republic of)
TC 133
Sizing systems and designations for clothes
17-21
Stockholm
(Sweden)
TC 165
Timber structures
18-20
Berlin (Germany)
TC 122
Packaging
19
Berlin (Germany)
TC 122/SC 3
Packaging/Performance requirements and tests for means of packaging, packages and unit loads
(as required by ISO/TC 122)
19-20
Rio de Janeiro
(Brazil)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries
19-21
San Diego (USA)
GA
General Assembly
21
Graz (Austria)
JTC 1/SC 6
Information technology/Telecommunications and information exchange between systems
22
San Diego (USA)
COUNCIL
Council
23-26
Sao Paulo
(Brazil)
TC 164/SC 3
Mechanical testing of metals/Hardness testing
23-26
Vienna (Austria)
TC 215
Health informatics
24-25
Ottawa (Canada)
*
TAG 8
Building
24-25
Sao Paulo
(Brazil)
**
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
24-25
Changsha
(China)
*
TC 264
Fireworks
24-26
Sydney
(Australia)
*
TC 54
Essential oils
24-28
Stockholm
(Sweden)
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
25-26
Sao Paulo
(Brazil)
**
TC 164/SC 2
Mechanical testing of metals/Ductility testing
25-27
Sao Paulo
(Brazil)
**
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
27
Sao Paulo
(Brazil)
**
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
28
Sao Paulo
(Brazil)
**
TC 164
Mechanical testing of metals
Milan (Italy)
**
TC 21/SC 3
Equipment for fire protection and fire fighting/Fire detection and alarm systems
Milan (Italy)
**
TC 21/SC 8
Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas
Cadiz (Spain)
**
TC 213
Dimensional and geometrical product specifications and verification
TC 106
Dentistry
**
TC 184/SC 1
Automation systems and integration/Physical device control
*
TC 34/SC 11
Food products/Animal and vegetable fats and oils
TC 247
Fraud countermeasures and controls
**
September-October 2012
30-6
Paris (France)
3rd Quarter 2012
Frankfurt
(Germany)
October 2012
1-2
Ottawa (Canada)
1-5
Vienna (Austria)
3
Ottawa (Canada)
4-5
MontanaVermala
(Switzerland)
5
Berlin (Germany)
6
*
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
TC 226
Materials for the production of primary aluminium
*
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
Chicago (USA)
*
TC 130
Graphic technology
8
Berlin (Germany)
*
TC 254
Safety of amusement rides and amusement devices
8-10
Castro Verde
(Portugal)
TC 183
Copper, lead, zinc and nickel ores and concentrates
8-11
Nagoya (Japan)
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
8-12
(USA)
**
TC 154
Processes, data elements and documents in commerce, industry and administration
9-10
Montreal
(Canada)
*
TC 199
Safety of machinery
10-11
Berlin (Germany)
*
TC 167
Steel and aluminium structures
10-12
Munich
(Germany)
*
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
11-12
Bogota
(Colombia)
*
CASCO
Committee on conformity assessment
11-12
Tokyo (Japan)
*
TC 119
Powder metallurgy
14-18
Tokyo (Japan)
**
TC 10/SC 8
Technical product documentation/Construction documentation
14-19
Tokyo (Japan)
TC 59
Buildings and civil engineering works
14-19
Praia do Forte
(Brazil)
TC 127
Earth-moving machinery
15
Sydney
(Australia)
TC 2/SC 7
Fasteners/Reference standards
15-19
Pointe-Claire,
Quebec
(Canada)
*
TC 6
Paper, board and pulps
15-19
Riccione (Italy)
*
TC 45
Rubber and rubber products
15-19
Riccione (Italy)
*
TC 45/SC 1
Rubber and rubber products/Hoses (rubber and plastics)
15-19
Riccione (Italy)
**
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
15-19
Amsterdam
(Netherlands)
*
TC 146
Air quality
15-19
Moscow
(Russian
Federation)
**
TC 204
Intelligent transport systems
16
Sydney
(Australia)
TC 2/SC 11
Fasteners/Fasteners with metric external thread
17
Sydney
(Australia)
TC 2/SC 14
Fasteners/Surface coatings
17
Jeju (Korea,
Republic of)
TC 17/SC 7
Steel/Methods of testing (other than mechanical tests and chemical analysis)
17
Berlin (Germany)
TC 22/SC 9
Road vehicles/Vehicle dynamics and road-holding ability
17-19
Guilin (China)
TC 202
Microbeam analysis
18
Sydney
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
*
(Australia)
18
Riccione (Italy)
18
*
TC 45/SC 2
Rubber and rubber products/Testing and analysis
Berlin (Germany)
TC 83
Sports and recreational equipment
18-19
Jeju (Korea,
Republic of)
TC 17
Steel
19
Sydney
(Australia)
TC 2
Fasteners
19
Riccione (Italy)
TC 45/SC 3
Rubber and rubber products/Raw materials (including latex) for use in the rubber industry
21-26
Sapporo (Japan)
TC 92
Fire safety
21-26
Sapporo (Japan)
*
TC 92/SC 2
Fire safety/Fire containment
22-26
Rome (Italy)
*
JTC 1/SC 27
Information technology/IT Security techniques
22-26
Messina (Italy)
*
TC 8
Ships and marine technology
22-26
(Japan)
**
TC 181
Safety of toys
22-27
Jeju (Korea,
Republic of)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
23
Sydney
(Australia)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
and drainage (including land drainage)
24
Sydney
(Australia)
**
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
supplies
24
Sydney
(Australia)
**
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply
of gaseous fuels
25
Sydney
(Australia)
**
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial
applications
25
Sydney
(Australia)
**
TC 138/SC 5
Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and
valves of plastic materials and their accessories -- Test methods and basic specifications
25
Sydney
(Australia)
**
TC 138/SC 6
Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for
all applications
25
Sydney
(Australia)
**
TC 138/SC 7
Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of
plastics materials
25
Elda (Alicante)
(Spain)
TC 216
Footwear
25-26
Tampa, Florida
(USA)
TC 112
Vacuum technology
25-27
Tampa, Florida
(USA)
*
TC 201
Surface chemical analysis
26
Sydney
(Australia)
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
(USA)
**
TC 36
Cinematography
(France)
**
TC 70/SC 7
Internal combustion engines/Tests for lubricating oil filters
Yokohama
(Japan)
**
TC 119/SC 3
Powder metallurgy/Sampling and testing methods for sintered metal materials (excluding
hardmetals)
TC 34/SC 17
Food products/Management systems for food safety
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
*
October-November 2012
29-1
Saitama (Japan)
31-7
Orlando (USA)
*
November 2012
5
Berlin (Germany)
*
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
5-8
Warsaw (Poland)
*
TC 98
Bases for design of structures
5-10
Jeju (Korea,
Republic of)
**
JTC 1
Information technology
6-8
Tokyo (Japan)
*
TC 17/SC 1
Steel/Methods of determination of chemical composition
6-8
Reykjavik
(Iceland)
TC 234
Fisheries and aquaculture
10-17
St. Petersburg
(Russian
Federation)
TC 176
Quality management and quality assurance
11-16
Florida (USA)
*
TC 184/SC 4
Automation systems and integration/Industrial data
12-16
Kyoto (Japan)
*
TC 244
Industrial furnaces and associated processing equipment
15-16
Xian (China)
*
TC 227
Springs
16
Atlanta (USA)
*
TC 17/SC 12
Steel/Continuous mill flat rolled products
26-27
London (United
Kingdom)
*
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
26-30
Florianopolis
(Brazil)
*
TC 43
Acoustics
26-30
Florianopolis
(Brazil)
*
TC 43/SC 1
Acoustics/Noise
27-29
Washington, D.C
(USA)
*
TC 20
Aircraft and space vehicles
Wiesbaden
(Germany)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and completion fluids, and well cements
(USA)
**
TC 118/SC 6
Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air
systems
Kyoto (Japan)
**
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
(Mexico)
**
TC 229
Nanotechnologies
*
TC 211
Geographic information/Geomatics
**
TC 157
Non-systemic contraceptives and STI barrier prophylactics
London (United
Kingdom)
*
TC 121/SC 3
Anaesthetic and respiratory equipment/Lung ventilators and related equipment
(Unknown)
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
(Australia)
**
TC 248
Project committee: Sustainability criteria for bioenergy
December 2012
11-12
Riyadh (Saudi
Arabia)
4th Quarter 2012
(United
Kingdom)
January 2013
7-12
February 2013
4-8
St. Gallen
(Switzerland)
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
4-9
London (United
*
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
Kingdom)
February-March 2013
25-1
(Korea, Republic
of)
**
JTC 1/SC 35
Information technology/User interfaces
March 2013
19-22
Jeju (Korea,
Republic of)
*
TC 107
Metallic and other inorganic coatings
27-28
Geneva
(Switzerland)
*
COUNCIL
Council
(Europe)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
April 2013
8-11
Helsinki
(Finland)
*
TC 117
Fans
17-18
Xian (China)
*
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Pipeline transportation systems
22-26
Berlin (Germany)
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of
machines
23-24
Dresden
(Germany)
**
TC 219
Floor coverings
Paris (France)
**
TC 29/SC 5
Small tools/Grinding wheels and abrasives
Salzburg
(Austria)
**
TC 89
Wood-based panels
Shenzen (China)
**
TC 130
Graphic technology
(USA)
**
TC 178
Lifts, escalators and moving walks
(South Africa)
**
TC 242
Energy Management
May 2013
13-16
Chicago (USA)
**
TC 195
Building construction machinery and equipment
13-17
(Italy)
**
TC 29
Small tools
13-17
(Italy)
**
TC 29/SC 8
Small tools/Tools for pressing and moulding
13-17
Guangzhou
(China)
*
TC 68
Financial services
13-17
Guangzhou
(China)
*
TC 68/SC 2
Financial services/Financial Services, security
27-31
Shanghai
(China)
*
TC 4
Rolling bearings
Ottawa (Canada)
**
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
(China)
**
TC 10
Technical product documentation
Paris (France)
**
TC 46/SC 11
Information and documentation/Archives/records management
(Unknown)
**
TC 158
Analysis of gases
**
TC 115
Pumps
June 2013
5
Prague (Czech
Republic)
17-21
Shanghai
(China)
**
TC 121
Anaesthetic and respiratory equipment
Washington, D.C
(USA)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and completion fluids, and well cements
**
TC 34/SC 4
Food products/Cereals and pulses
**
JTC 1/SC 35
Information technology/User interfaces
2nd Quarter 2013
(Canada)
August 2013
26-30
(Canada)
September 2013
18-20
St. Petersburg
(Russian
Federation)
*
GA
General Assembly
21
St. Petersburg
(Russian
Federation)
*
COUNCIL
Council
Paris (France)
**
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
(Unknown)
**
TC 21
Equipment for fire protection and fire fighting
Victoria
(Canada)
**
TC 33
Refractories
(Korea, Republic
of)
**
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing
conditions
(Korea, Republic
of)
**
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
(Korea, Republic
of)
**
TC 123/SC 5
Plain bearings/Quality analysis and assurance
(Korea, Republic
of)
**
TC 123/SC 6
Plain bearings/Terms and common items
(Korea, Republic
of)
**
TC 123/SC 7
Plain bearings/Special types of plain bearings
Tokyo (Japan)
**
TC 142
Cleaning equipment for air and other gases
October 2013
7
Istanbul (Turkey)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
7-11
Istanbul (Turkey)
**
TC 38
Textiles
8
Istanbul (Turkey)
**
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
9
Istanbul (Turkey)
**
TC 38/SC 23
Textiles/Fibres and yarns
10
Istanbul (Turkey)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
11
Garching
(Germany)
**
TC 60
Gears
11
Garching
(Germany)
**
TC 60/SC 1
Gears/Nomenclature and wormgearing
11
Garching
(Germany)
**
TC 60/SC 2
Gears/Gear capacity calculation
Sarajevo (Bosnia
and
Herzegovina)
**
TC 34/SC 12
Food products/Sensory analysis
(France)
**
TC 111/SC 1
Round steel link chains, chain slings, components and accessories/Chains and chain slings
Berlin (Germany)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
Beijing (China)
**
TC 184/SC 2
Automation systems and integration/Robots and robotic devices
(Japan)
**
TC 206
Fine ceramics
November 2013
10
Okinawa (Japan)
**
TC 201
Surface chemical analysis
10-15
Mexico (Mexico)
*
TC 113
Hydrometry
(France)
**
JTC 1
Information technology
(Korea, Republic
of)
**
TC 106
Dentistry
Gaithersburg
(USA)
**
TC 172/SC 9
Optics and photonics/Electro-optical systems
(Australia)
**
REMCO
Committee on reference materials
(South Africa)
**
TC 27
Solid mineral fuels
(South Africa)
**
TC 37
Terminology and other language and content resources
(Unknown)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
(South Africa)
**
TC 44
Welding and allied processes
Porto de
Galinhas (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Norway)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
and drainage (including land drainage)
(Brazil)
**
TC 155
Nickel and nickel alloys
(Sweden)
**
TC 163
Thermal performance and energy use in the built environment
Amsterdam
(Netherlands)
**
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
(Unknown)
**
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
(South Africa)
**
TC 202
Microbeam analysis
(Sweden)
**
TC 205
Building environment design
(Portugal)
**
TC 228
Tourism and related services
(Finland)
**
TC 257
General technical rules for determination of energy savings in renovation projects, industrial
enterprises and regions
**
JTC 1/SC 35
Information technology/User interfaces
London (United
Kingdom)
*
TC 68
Financial services
Washington, D.C
**
TC 46/SC 11
Information and documentation/Archives/records management
4th Quarter 2013
Month unknown 2013
February 2014
(South America)
May 2014
15
(USA)
September 2014
(South Africa)
**
TC 178
Lifts, escalators and moving walks
**
TC 135
Non-destructive testing
(USA)
**
REMCO
Committee on reference materials
(Brazil)
**
TC 28
Petroleum products and lubricants
Beijing (China)
**
TC 36
Cinematography
(Germany)
**
TC 37
Terminology and other language and content resources
(Japan)
**
TC 44
Welding and allied processes
(USA)
**
TC 142
Cleaning equipment for air and other gases
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
(South Africa)
**
REMCO
Committee on reference materials
(Finland)
**
TC 44
Welding and allied processes
London (United
Kingdom)
**
TC 142
Cleaning equipment for air and other gases
(China)
**
TC 155
Nickel and nickel alloys
**
TC 44
Welding and allied processes
October 2014
Prague (Czech
Republic)
Month unknown 2014
2nd Quarter 2015
(China)
Month unknown 2015
Month unknown 2016
(Australia)