International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft
International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 April to 30 April 2012
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 8
Ships and marine technology
ISO/DPAS 18215
Ships and marine technology — Vessel machinery operations in polar waters — Guidelines
TC 20
Aircraft and space vehicles
ISO/CD 6966-2
Aircraft ground equipment — Basic requirements — Part 2: Safety requirements
ISO/CD 10254
Air cargo and ground equipment — Vocabulary
ISO/CD 15845
Aircraft ground support equipment — Loading equipment for the disabled — Functional requirements
ISO/CD 16694
Space systems — The measured parameters at firing bench and flight tests of liquid rocket engines
TC 29
Small tools
ISO/CD 6789-1
Assembly tools for screws and nuts — Hand torque tools — Requirements and test methods for design conformance
testing, quality conformance testing and recalibration procedure — Part 1: Requirements and test method for design
conformance testing, quality conformance testing and calibration procedure
ISO/CD 6789-2
Assembly tools for screws and nuts — Hand torque tools — Requirements and test methods for design conformance
testing, quality conformance testing and recalibration procedure — Part 2: Requirements for calibration and
determination of measurement uncertainly
TC 39
Machine tools
ISO/CD 13041-5
Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of feeds, speeds
and interpolations
TC 54
Essential oils
ISO/CD 16928
Essential oil of ginger [Zingiber officinale Rosc.]
TC 58
Gas cylinders
ISO/CD 21172-1
Gas cylinders — Welded steel pressure drums up to 3 000 litres capacity for the transport of gases — Design and
construction — Part 1: Capacities up to 1 000 litres
TC 59
Buildings and civil engineering works
ISO/CD 16757
Product Data for Building Services Plant Models
TC 61
Plastics
ISO/CD 16620-2
Plastics — Determination of biobased content — Part 2: Calculating and reporting the biobased-carbon content
ISO/CD 16620-3
Plastics — Determination of biobased content — Part 3: Determination and reporting of biobased-plastic content
ISO/CD 16365-1
Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for
specifications
ISO/CD 16365-2
Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and
determination of properties
ISO/CD 16365-3
Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 3: Distinction between ether and ester
polyurethanes by determination of the ester group content
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 16641
Measurement of radioactivity in the environment — Air — Radon-220: Integrated measurement methods for the
determination of the average thoron and thoron decay products activity concentration using passive sampling and
delayed analysis
TC 92
Fire safety
ISO/CD 5660-1
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone
calorimeter method)
ISO/CD 17554
Reaction to fire tests — Mass loss measurement
ISO/DTR 22899-2
Determination of the resistance to jet fires of passive fire protection — Part 2: Classification and implementation
methods
TC 106
Dentistry
ISO/CD 17730
Fluoride Varnishes
TC 110
Industrial trucks
ISO/CD 10896-4
Rough-terrain trucks — Safety requirements and verification — Part 4: Freely swinging loads
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 44271:2007/CD Amd 1
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1
ISO/CD 16943
Plastics piping systems for the supply of gaseous fuels — On site inspection of PE electrofusion joints using Non
Destructive Testing (NDT)
TC 146
Air quality
ISO/CD 12219-5
Interior air of road vehicles — Part 5: Screening method for the determination of the emissions of volatile organic
compounds from vehicle interior parts and materials — Static chamber method
TC 150
Implants for surgery
ISO/CD 5841-3
Implants for surgery — Cardiac pacemakers — Part 3: Low-profile connectors (IS-1) for implantable pacemakers
TC 164
Mechanical testing of metals
ISO/CD 6506-1
Metallic materials — Brinell hardness test — Part 1: Test method
ISO/CD 6506-2
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
ISO/CD 6506-3
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
ISO/CD 6506-4
Metallic materials — Brinell hardness test — Part 4: Table of hardness values
ISO/CD 6508-1
Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
ISO/CD 6508-2
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C,
D, E, F, G, H, K, N, T)
ISO/CD 6508-3
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K,
N, T)
ISO/CD 16859-1
Metallic materials — Leeb hardness test — Part 1: Test method
ISO/CD 16859-2
Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices
ISO/CD 16859-3
Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks
TC 199
Safety of machinery
ISO/CD 14120
Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards
TC 204
Intelligent transport systems
ISO/DTS 21219-4
Intelligent transport systems — Traffic and Travel Information via Transport Protocol Expert Group, Generation 2
(TPEG2) — Part 4: UML to XML conversion rules
TC 247
Fraud countermeasures and controls
ISO/CD 16678
Anti-counterfeiting tack and trace method using unique identifier numbering
TC 261
Additive manufacturing
ISO/CD 17296-4
Additive manufacturing — Rapid technologies (rapid prototyping) — Part 4: Data processing
JTC 1
Information technology
ISO/IEC CD
29182-5
Reference architecture for sensor network applications and services — Part 5: Interface definitions
ISO/IEC 103736:2011/PDAM 6
Identification cards — Test methods — Part 6: Proximity cards — Amendment 6: Alternating between PICC and PCD
functionalities
ISO/IEC PDTR
18268
Identification cards — Contactless integrated circuit cards — Proximity cards — Multiple PICCs in a single PCD field
ISO/IEC CD
14776-251
Information technology -Small computer system interface (SCSI) — Part 251: USB attached SCSI (UAS)
ISO/IEC 230024:2010/PDAM 3
Information technology — MPEG video technologies — Part 4: Video tool library — Amendment 3: Graphics tool library
(GTL) for the reconfigurable multimedia coding (RMC) framework
ISO/IEC CD
23002-5
Information technology — MPEG video technologies — Part 5:
ISO/IEC CD
23008-2
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High
efficiency video coding
ISO/IEC CD
24730-1
Information technology — Real-time locating systems (RTLS) — Part 1: Application program interface (API)
ISO/IEC CD
11179-1
Information technology — Metadata registries (MDR) — Part 1: Framework
ISO/IEC CD 17549
Information technology — User interfaces — Guidelines on menu navigation with 4-direction devices
ISO/IEC CD
24752-1
Information technology — User interfaces — Universal remote console — Part 1: Framework
ISO/IEC CD
24752-4
Information technology — User interfaces — Universal remote console — Part 4: Target description
ISO/IEC CD
24752-5
Information technology — User interfaces — Universal remote console — Part 5: Resource description
ISO/IEC CD
30113-1
Information technology — Gesture-based interface — Navigation gestures common between mice, touch pads, touch
screens, tablets and similar devices — Part 1: Framework
ISO/IEC CD
30113-2
Information technology — Gesture-based interface — Navigation gestures common between mice, touch pads, touch
screens, tablets and similar devices — Part 2: Mouse gestures
ISO/IEC CD
30122-1
Information technology — User interfaces — Principal voice commands — Part 1: Framework and general guidance
ISO/IEC CD
30122-4
Information technology — User interfaces — Principal voice commands — Part 4: Management of voice command
registration
DIS circulated
Period from 01 April to 30 April 2012
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 4
ISO/DIS 2982-1
Rolling bearings
*
Rolling bearings — Accessories — Part 1: Dimensions for adapter sleeve assemblies and
withdrawal sleeves
2012-09-11
(Revision of ISO 2982-1:1995)
ISO/DIS 2982-2
*
Rolling bearings — Accessories — Part 2: Dimensions for locknuts and locking devices
2012-09-11
(Revision of ISO 2982-2:2001)
TC 8
Ships and marine technology
ISO/DIS 13643-5
*
Ships and marine technology — Manoeuvring of ships — Part 5: Submarine specials
2012-09-14
ISO/DIS 13643-6
*
Ships and marine technology — Manoeuvring of ships — Part 6: Model test specials
2012-09-14
TC 17
Steel
ISO/DIS 6929
Steel products — Vocabulary
2012-09-11
(Revision of ISO 6929:1987)
ISO/DIS 5951
*
Hot-rolled steel sheet of higher yield strength with improved formability
2012-09-11
(Revision of ISO 5951:2008)
ISO/DIS 6316
*
Hot-rolled steel strip of structural quality
2012-09-28
(Revision of ISO 6316:2008)
ISO/DIS 10384
Hot-rolled carbon steel sheet as defined by chemical composition
(Revision of ISO 10384:2008)
2012-09-20
Steel and steel products — Location and preparation of samples and test pieces for mechanical
testing
ISO/DIS 377
2012-09-13
(Revision of ISO 377:1997, ISO 377:1997/Cor 1:1997)
TC 20
Aircraft and space vehicles
Space systems — Lunar simulants
2012-09-06
ISO/DIS 16127
Space systems — Prevention of break-up of unmanned spacecraft
2012-09-25
TC 23
Tractors and machinery for agriculture and forestry
ISO/DIS 10788
ISO/DIS 5700
*
*
Tractors for agriculture and forestry — Roll-over protective structures — Static test method and
acceptance conditions
2012-09-19
(Revision of ISO 5700:2006)
ISO/DIS 12933.2
ISO/DIS 9912-3
*
Agricultural tractors — Safety and performance requirements for braking
2012-06-28
Agricultural irrigation equipment — Filters — Part 3: Automatic self-cleaning strainer-type filters
2012-09-11
(Revision of ISO 9912-3:1992)
TC 28
ISO/DIS 9162
Petroleum products and lubricants
*
Petroleum products — Fuels (class F) — Liquefied petroleum gases — Specifications
2012-09-28
(Revision of ISO 9162:1989)
TC 33
Refractories
ISO/DIS 16334
*
Monolithic refractory products — Determination of resistance to explosive spalling
2012-09-17
ISO/DIS 16349
*
Refractory materials — Determination of abrasion resistance at elevated temperature
2012-09-11
TC 34
ISO
21570:2005/DAmd
1
Food products
*
TC 35
Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived
products — Quantitative nucleic acid based methods — Amendment 1
2012-10-01
Paints and varnishes
ISO/DIS 3233-2
*
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2:
Determination by measurement of the dry-film density
2012-09-27
ISO/DIS 16925
*
Paints and varnishes — Determination of the resistance of coatings to high-pressure water-jetting
2012-09-27
ISO/DIS 16927
*
Paints and varnishes — Determination of the overcoatability and recoatability of a coating
2012-09-27
TC 41
ISO/DIS 1813
Pulleys and belts (including veebelts)
*
Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal
belts — Electrical conductivity of antistatic belts: Characteristics and methods of test
2012-09-22
(Revision of ISO 1813:1998)
ISO/DIS 24035
*
TC 43
ISO/DIS 16283-1
Belt drives — Frictional drive belts for the agricultural industry and corresponding pulleys —
Dimensions
2012-09-27
Acoustics
*
Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1:
Airborne sound insulation
2012-09-13
(Revision of ISO 140-4:1998, ISO 140-5:1998, ISO 140-7:1998, ISO 140-14:2004)
TC 45
ISO/DIS 2285
Rubber and rubber products
*
Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and
of tension set, elongation and creep under constant tensile load
(Revision of ISO 2285:2007)
2012-09-05
ISO
12243:2003/DAmd
1
*
TC 54
ISO/DIS 9235
Medical gloves made from natural rubber latex — Determination of water-extractable protein using
the modified Lowry method — Amendment 1
2012-09-13
Essential oils
*
Aromatic natural raw materials — Vocabulary
2012-09-27
(Revision of ISO 9235:1997)
TC 58
ISO/DIS 3807
Gas cylinders
*
Gas cylinders — Acetylene cylinders — Basic requirements and type testing
2012-09-06
(Revision of ISO 3807-1:2000, ISO 3807-2:2000, ISO/NP 3807-1, ISO/NP 3807-2)
ISO 152451:2001/DAmd 1
*
TC 61
ISO/DIS 15791-1
Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 1: Specification
— Amendment 1
2012-09-20
Plastics
*
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1:
General guidance
2012-09-13
(Revision of ISO 15791-1:2002)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
ISO/DIS 14313
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
2012-09-19
(Revision of ISO 14313:2007, ISO 14313:2007/Cor 1:2009)
ISO
19902:2007/DAmd
1
Petroleum and natural gas industries — Fixed steel offshore structures — Amendment 1
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/DIS 15690
*
TC 86
ISO/DIS 16345
Radiological protection — Recommendations for dealing with discrepancies between personal
dosimeter systems used in parallel
2012-09-13
2012-09-21
Refrigeration and air-conditioning
*
Water-cooling towers — Testing and rating of thermal performance
2012-09-14
TC 106
Dentistry
ISO/DIS 16635-1
Dentistry — Dental dam technique — Part 1: Hole punch
2012-09-28
Dentistry — Minimal dental implant data set for clinical use
2012-09-20
ISO/DIS 16498
*
TC 110
Industrial trucks
ISO/DIS 22915-15
Indutrial trucks — Verification of stability — Part 15: Counterbalanced trucks with articulated
steering
TC 121
Anaesthetic and respiratory equipment
ISO/DIS 5356-1
*
Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets
2012-09-14
2012-09-06
(Revision of ISO 5356-1:2004)
ISO/DIS 27427
*
Anaesthetic and respiratory equipment — Nebulizing systems and components
2012-09-06
(Revision of ISO 27427:2010)
ISO/DIS 16571
*
TC 131
ISO/DIS 1179-1
Systems for evacuation of plume generated by medical devices
2012-09-24
Fluid power systems
*
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with
elastomeric or metal-to-metal sealing — Part 1: Threaded ports
2012-09-20
(Revision of ISO 1179-1:2007)
ISO/DIS 1179-2
*
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with
elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud
ends with elastomeric sealing (type E)
2012-09-20
(Revision of ISO 1179-2:2007, ISO 1179-2:2007/DAmd 1)
TC 135
ISO/DIS 3452-2
Non-destructive testing
*
Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials
2012-09-13
(Revision of ISO 3452-2:2006)
ISO/DIS 3452-3
*
Non-destructive testing — Penetrant testing — Part 3: Reference test blocks
2012-09-13
(Revision of ISO 3452-3:1998, ISO 3452-3:1998/Cor 1:2001)
TC 145
Graphical symbols
ISO
7001:2007/DAmd 1
*
Graphical symbols — Public information symbols — Amendment 1: Symbol PI CF 011: Internet
café
2012-09-11
ISO
7001:2007/DAmd 4
*
Graphical symbols — Public information symbols — Amendment 4: Symbol PI PF 036: Child health
care centre
2012-09-11
ISO
7001:2007/DAmd 5
*
Graphical symbols — Public information symbols — Amendment 5: Symbol PI PF 037: Library
2012-09-11
ISO
7001:2007/DAmd 6
*
Graphical symbols — Public information symbols — Amendment 6: Symbol PI PF 038: Indoor play
area
2012-09-11
ISO
7001:2007/DAmd 7
*
Graphical symbols — Public information symbols — Amendment 7: Symbol PI PF 039: Packed
lunch room
2012-09-11
ISO
7001:2007/DAmd
10
*
Graphical symbols — Public information symbols — Amendment 10: Symbol PI PF 043: Dentist
2012-09-11
ISO
7001:2007/DAmd
11
*
Graphical symbols — Public information symbols — Amendment 11: Symbol PI PF 044: Health
care centre or doctor
2012-09-11
ISO
7001:2007/DAmd
12
*
Graphical symbols — Public information symbols — Amendment 12: Symbol PI PF 045:
Accessibility, limited walking capability
2012-09-11
ISO
7001:2007/DAmd
13
*
Graphical symbols — Public information symbols — Amendment 13: Symbol PI PF 046:
Accessibility, assistance dog
2012-09-11
ISO
7001:2007/DAmd
14
*
Graphical symbols — Public information symbols — Amendment 14: Symbol PI PF 047:
Accessibility, personal assistant available
2012-09-11
ISO
7001:2007/DAmd
15
*
Graphical symbols — Public information symbols — Amendment 15: Symbol PI PF 048:
Accessibility, hard of hearing
2012-09-11
ISO
7001:2007/DAmd
16
*
Graphical symbols — Public information symbols — Amendment 16: Symbol PI PF 049:
Accessibility, vision impaired
2012-09-11
ISO
7001:2007/DAmd
17
*
Graphical symbols — Public information symbols — Amendment 17: Symbol PI PF 050: Vegetarian
food
2012-09-11
ISO
7001:2007/DAmd
18
*
Graphical symbols — Public information symbols — Amendment 18: Symbol PI PF 051:
Accessibility, blind or low vision
2012-09-11
ISO
7001:2007/DAmd
*
Graphical symbols — Public information symbols — Amendment 20: Symbol PI PF 053:
Transportation centre
2012-09-11
20
ISO
7001:2007/DAmd
21
*
Graphical symbols — Public information symbols — Amendment 21: Symbol PI PF 054: Museum
2012-09-11
ISO
7001:2007/DAmd
22
*
Graphical symbols — Public information symbols — Amendment 22: Symbol PI SA 003: Indoor
swimming pool
2012-09-11
ISO
7001:2007/DAmd
23
*
Graphical symbols — Public information symbols — Amendment 23: Symbol PI SA 004: Sports hall
2012-09-11
ISO
7001:2007/DAmd
24
*
Graphical symbols — Public information symbols — Amendment 24: Symbol PI TC 008: Natural
area with public access
2012-09-11
ISO
7001:2007/DAmd
25
*
Graphical symbols — Public information symbols — Amendment 25: Symbol PI TC 009: Hiking trail
2012-09-11
ISO
7001:2007/DAmd
26
*
Graphical symbols — Public information symbols — Amendment 26: Symbol PI TF 022: Priority
seats for elderly people
2012-09-11
ISO
7001:2007/DAmd
27
*
Graphical symbols — Public information symbols — Amendment 27: Symbol PI TF 023: Priority
seats for injured people
2012-09-11
ISO
7001:2007/DAmd
28
*
Graphical symbols — Public information symbols — Amendment 28: Symbol PI TF 024: Priority
seats for people with internal medical conditions
2012-09-11
ISO
7001:2007/DAmd
29
*
Graphical symbols — Public information symbols — Amendment 29: Symbol PI TF 025: Priority
seats for people with small children
2012-09-11
ISO
7001:2007/DAmd
30
*
Graphical symbols — Public information symbols — Amendment 30: Symbol PI TF 026: Priority
seats for expecting mothers
2012-09-11
ISO
7001:2007/DAmd
31
*
Graphical symbols — Public information symbols — Amendment 31: Symbol PI PF 055: Priority
access for elderly people
2012-09-11
ISO
7001:2007/DAmd
32
*
Graphical symbols — Public information symbols — Amendment 32: Symbol PI PF 056: Priority
access for injured people
2012-09-11
ISO
7001:2007/DAmd
33
*
Graphical symbols — Public information symbols — Amendment 33: Symbol PI PF 057: Priority
access for people with internal medical conditions
2012-09-11
ISO
7001:2007/DAmd
34
*
Graphical symbols — Public information symbols — Amendment 34: Symbol PI PF 058: Priority
access for people with small children
2012-09-11
ISO
7001:2007/DAmd
35
*
Graphical symbols — Public information symbols — Amendment 35: Symbol PI PF 059: Priority
access for expecting mothers
2012-09-11
ISO
7001:2007/DAmd
36
*
Graphical symbols — Public information symbols — Amendment 36: Symbol PI PB 006: Dogs
should be carried
2012-09-11
ISO
7001:2007/DAmd
37
*
Graphical symbols — Public information symbols — Amendment 37: Symbol PI CF 014:
Newsstand/News kiosk/Newsagent
2012-09-11
ISO
7001:2007/DAmd
*
Graphical symbols — Public information symbols — Amendment 40: Symbol PI TC 010: Location
for campfires
2012-09-11
40
ISO
7001:2007/DAmd
41
*
Graphical symbols — Public information symbols — Amendment 41: Symbol PI TC 011: Bird
sanctuary
2012-09-11
ISO
7001:2007/DAmd
42
*
Graphical symbols — Public information symbols — Amendment 42: Symbol PI TC 012: Wetland
reserve
2012-09-11
ISO
7001:2007/DAmd
43
*
Graphical symbols — Public information symbols — Amendment 43: Symbol PI TC 013: Hot spring
or hot tub
2012-09-11
ISO
7001:2007/DAmd
44
*
Graphical symbols — Public information symbols — Amendment 44: Symbol PI TC 014: Audio tour
2012-09-11
ISO
7001:2007/DAmd
45
*
Graphical symbols — Public information symbols — Amendment 45: Symbol PI TF 027: Airport bus
2012-09-11
ISO
7001:2007/DAmd
46
*
Graphical symbols — Public information symbols — Amendment 46: Symbol PI PF 062:
Communication in the specified language
2012-09-11
ISO
7001:2007/DAmd
47
*
Graphical symbols — Public information symbols — Amendment 47: Symbol PI PF 063: Recycling
— Aluminium cans
2012-09-11
ISO
7001:2007/DAmd
48
*
Graphical symbols — Public information symbols — Amendment 48: Symbol PI PF 064: Recycling
— Magnetic type of steel
2012-09-11
ISO
7001:2007/DAmd
49
*
Graphical symbols — Public information symbols — Amendment 49: Symbol PI PF 065: Recycling
— Glass
2012-09-11
ISO
7001:2007/DAmd
50
*
Graphical symbols — Public information symbols — Amendment 50: Symbol PI PF 066: Recycling
2012-09-11
ISO
7001:2007/DAmd
51
*
Graphical symbols — Public information symbols — Amendment 51: Symbol PI PB 007: Take off
your shoes
2012-09-11
TC 146
Air quality
ISO/DIS 25597
*
Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases
using cyclone samplers and sample dilution
2012-09-30
ISO/DIS 13137
*
Workplace atmospheres — Pumps for personal sampling of chemical and biological agents —
Requirements and test methods
2012-08-09
TC 150
Implants for surgery
ISO/DIS 13179-1
*
Implants for surgery — Plasma sprayed coatings of unalloyed titanium — Part 1: General
requirements
2012-09-07
ISO/DIS 15309
*
Implants for surgery - Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers
and compounds for use in implantable medical devices
2012-09-07
ISO/DIS 7206-6.3
*
Implants for surgery — Partial and total hip joint prostheses — Part 6: Endurance properties testing
and performance requirements of neck region of stemmed femoral components
2012-06-09
(Revision of ISO 7206-6:1992)
TC 172
Optics and photonics
ISO 1011012:2007/DAmd 1
*
Optics and photonics — Preparation of drawings for optical elements and systems — Part 12:
Aspheric surfaces — Amendment 1
2012-09-11
ISO/DIS 8600-1
*
Endoscopes — Medical endoscopes and endotherapy devices — Part 1: General requirements
2012-09-17
(Revision of ISO 8600-1:2005)
TC 180
ISO/DIS 9806
Solar energy
*
Solar energy — Solar thermal collectors — Test methods
2012-09-20
(Revision of ISO 9806-1:1994, ISO 9806-2:1995, ISO 9806-3:1995)
TC 184
ISO/DIS 16739
Automation systems and integration
*
Industry Foundation Classes (IFC) for data sharing in the construction and facility management
industries
2012-09-03
(Revision of ISO/PAS 16739:2005)
TC 188
ISO/DIS 10088
Small craft
*
Small craft — Permanently installed fuel systems
2012-09-13
(Revision of ISO 10088:2009)
TC 190
ISO/DIS 28258
Soil quality
*
ISO/DIS 13859
ISO/DIS 16387
*
Soil quality — Digital exchange of soil-related data
2012-09-06
Soil quality — Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography
(GC) and high performance liquid chromatography (HPLC)
2012-09-18
Soil quality — Effects of pollutants on Enchytraeidae (Enchytraeus sp.) — Determination of effects
on reproduction
2012-09-27
(Revision of ISO 16387:2004)
ISO/DIS 29200
*
TC 193
ISO/DIS 14532
Soil quality — Assessment of genotoxic effects on higher plants — Vicia faba micronucleus test
2012-09-04
Natural gas
*
Natural gas — Vocabulary
2012-09-22
(Revision of ISO 14532:2001, ISO 14532:2001/Cor 1:2002)
TC 206
ISO/DIS 14605
Fine ceramics
*
TC 214
ISO/DIS 18878
Fine Ceramics (Advanced ceramics, advanced technical ceramics) — Light source for testing
semiconducting photocatalytic materials used under indoor lighting environment
2012-09-29
Elevating work platforms
*
Mobile elevating work platforms — Operator (driver) training
2012-09-06
(Revision of ISO 18878:2004)
TC 215
ISO/HL7 DIS
10781
Health informatics
*
Electronic Health Record-System Functional Model, Release 2.0 (EHR FM)
2012-09-27
(Revision of ISO/HL7 10781:2009)
TC 218
ISO/DIS 24294.2
Timber
*
Timber — Round and sawn timber — Vocabulary
2012-06-26
(Revision of ISO 4473:1988, ISO 4474:1989, ISO 4476:1983, ISO 8965:1987, ISO 8966:1987)
TC 219
ISO/DIS 17984
Floor coverings
*
Machine-made textile floor coverings — Determination of dimensional changes after exposure to
heat and/or water
2012-09-19
(Revision of ISO/PAS 17984:2001)
JTC 1
Information technology
ISO/IEC DIS 19508
Information technology — Object Management Group — Meta Object Facility (MOF) Core Version
2.4.1
2012-09-06
ISO/IEC DIS 19509
Information technology — Object Management Group — MOF 2 XMI Version 2.4.1
2012-09-06
ISO/IEC 247272:2008/DAmd 1
Identification cards — Integrated circuit card programming interfaces — Part 2: Generic card
interface — Amendment 1: .
2012-09-24
ISO/IEC 247273:2008/DAmd 1
Identification cards — Integrated circuit card programming interfaces — Part 3: Application interface
— Amendment 1: .
2012-09-24
ISO/IEC 247274:2008/DAmd 1
Identification cards — Integrated circuit card programming interfaces — Part 4: Application
programming interface (API) administration — Amendment 1: .
2012-09-24
ISO/IEC DIS 18025
Information technology — Environmental Data Coding Specification (EDCS)
2012-09-13
(Revision of ISO/IEC 18025:2005)
ISO/IEC DIS
14776-153
Information technology — Small Computer System Interface (SCSI) — Part 153: Serial Attached
SCSI - 2.1 (SAS-2.1)
2012-09-24
ISO/IEC DIS
17760-101
Information technology — AT Attachment 8 — Part 101: ATA/ATAPI Command Set (ATA8-ACS)
2012-09-24
ISO/IEC 154449:2005/DAmd 5
Information technology — JPEG 2000 image coding system: Interactivity tools, APIs and protocols
— Part 9: — Amendment 5: UDP transport and additional enhancements to JPIP
2012-09-28
ISO/IEC DIS
21000-20
Information technology — Multimedia framework (MPEG-21) — Part 20: Contract Expression
Language
2012-09-11
ISO/IEC DIS
23005-2
Information technology — Media context and control — Part 2: Control information
2012-09-11
(Revision of ISO/IEC 23005-2:2011)
ISO/IEC DIS
23005-3
Information technology — Media context and control — Part 3: Sensory information
2012-09-24
(Revision of ISO/IEC 23005-3:2011)
ISO/IEC DIS
23005-4
Information technology — Media context and control — Part 4: Virtual world object characteristics
2012-09-24
(Revision of ISO/IEC 23005-4:2011)
ISO/IEC DIS
23005-5
Information technology — Media context and control — Part 5: Data formats for interaction devices
2012-09-06
(Revision of ISO/IEC 23005-5:2011)
ISO/IEC DIS
23005-6
Information technology — Media context and control — Part 6: Common types and tools
(Revision of ISO/IEC 23005-6:2011)
FDIS circulated
Period from 01 April to 30 April 2012
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
2012-09-24
Vote terminates
TC 2
ISO/FDIS 4162
Fasteners
*
Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade
B
2012-06-05
(Revision of ISO 4162:1990)
ISO
10642:2004/FDAm
d1
*
TC 5
ISO/FDIS 13470
2012-06-06
Ferrous metal pipes and metallic fittings
*
TC 8
ISO/FDIS 30002
Hexagon socket countersunk head screws — Amendment 1
Trenchless applications of ductile iron pipes systems — Product design and installation
2012-06-14
Ships and marine technology
*
Ships and marine technology — Ship recycling management systems — Guidelines for selection of
ship recyclers (and pro forma contract)
2012-06-05
(Revision of ISO 30002:2010)
ISO/FDIS 16437
*
Ships and marine technology - Lifesaving and fire protection — Atmospheric oil mist detectors for
ships
2012-06-04
ISO/FDIS 7365
*
Shipbuilding and marine structures — Deck machinery — Towing winches for deep sea use
2012-06-05
(Revision of ISO 7365:1983)
ISO/FDIS 614
*
Ships and marine technology — Toughened safety glass panes for rectangular windows and side
scuttles — Punch method of non-destructive strength testing
2012-06-04
(Revision of ISO 614:1989)
ISO/FDIS 1751
*
Ships and marine technology — Ships' side scuttles
2012-06-21
(Revision of ISO 1751:1993)
ISO/FDIS 3903
*
Ships and marine technology — Ships' ordinary rectangular windows
2012-06-21
(Revision of ISO 3903:1993)
ISO/FDIS 21005
*
Ships and marine technology — Thermally toughened safety glass panes for windows and side
scuttles
2012-06-11
(Revision of ISO 21005:2004)
TC 10
ISO/FDIS 10209
Technical product documentation
*
Technical product documentation — Vocabulary — Terms relating to technical drawings, product
definition and related documentation
2012-06-06
(Revision of ISO 10209-1:1992, ISO 10209-2:1993, ISO 10209-4:1999)
IEC/FDIS 82079-1
Preparation of instructions for use — Structuring, content and presentation — Part 1: General
principles and detailed requirements
TC 20
Aircraft and space vehicles
ISO/FDIS 27471
*
TC 22
ISO/FDIS 27145-2
Aircraft ground equipment — Upper deck loader — Functional requirements
2012-06-25
2012-06-05
Road vehicles
*
Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD)
communication requirements — Part 2: Common data dictionary
2012-06-05
(Revision of ISO/PAS 27145-2:2006)
ISO/FDIS 27145-3
*
Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD)
communication requirements — Part 3: Common message dictionary
(Revision of ISO/PAS 27145-3:2006)
2012-06-05
ISO/FDIS 27145-4
*
Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD)
communication requirements — Part 4: Connection between vehicle and test equipment
2012-06-05
(Revision of ISO/PAS 27145-4:2006)
TC 23
ISO/FDIS 4254-13
Tractors and machinery for agriculture and forestry
*
TC 24
Agricultural machinery — Safety — Part 13: Large rotary mowers
2012-06-14
Particle characterization including sieving
ISO/FDIS 13099-1
*
Colloidal systems — Methods for zeta-potential determination — Part 1: Electroacoustic and
electrokinetic phenomena
2012-06-04
ISO/FDIS 13099-2
*
Colloidal systems — Methods for zeta-potential determination — Part 2: Optical methods
2012-06-04
TC 27
ISO/FDIS 501
Solid mineral fuels
*
Hard coal — Determination of the crucible swelling number
2012-06-21
(Revision of ISO 501:2003)
TC 28
ISO/FDIS 4404-1
Petroleum products and lubricants
*
Petroleum and related products — Determination of the corrosion resistance of fire-resistant
hydraulic fluids — Part 1: Water-containing fluids
2012-06-13
(Revision of ISO 4404-1:2001)
ISO/FDIS 12152
*
TC 29
ISO/FDIS 15917
Lubricants, industrial oils and related products — Determination of the foaming and air release
properties of industrial gear oils using a spur gear test rig — Flender foam test procedure
2012-06-05
Small tools
*
Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials —
Dimensions
2012-06-04
(Revision of ISO 15917:2007)
TC 30
ISO/FDIS 12242
Measurement of fluid flow in closed conduits
*
TC 34
ISO/FDIS 5530-2
Measurement of fluid flow in closed conduits — Ultrasonic transit-time meters for liquid
2012-06-11
Food products
*
Wheat flour — Physical characteristics of doughs — Part 2: Determination of rheological properties
using an extensograph
2012-06-03
(Revision of ISO 5530-2:1997)
ISO 92331:2007/FDAmd 1
*
Cheese, cheese rind and processed cheese — Determination of natamycin content — Part 1:
Molecular absorption spectrometric method for cheese rind — Amendment 1
2012-06-28
ISO 92332:2007/FDAmd 1
*
Cheese, cheese rind and processed cheese — Determination of natamycin content — Part 2: Highperformance liquid chromatographic method for cheese, cheese rind and processed cheese —
Amendment 1
2012-06-28
TC 35
ISO/FDIS 2812-3
Paints and varnishes
*
Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent
medium
2012-06-20
(Revision of ISO 2812-3:2007)
ISO/FDIS 13076
*
Paints and varnishes — Lighting and procedure for visual assessments of coatings
2012-06-20
ISO/FDIS 13632
*
Binders for paints and varnishes — Rosin — Sampling and sample preparation for colour
measurement
2012-06-20
TC 37
ISO/FDIS 10241-2
Terminology and other language and content resources
*
Terminological entries in standards — Part 2: Adoption of standardized terminological entries
2012-06-21
TC 38
ISO/FDIS 6938
Textiles
*
Textiles — Natural fibres — Generic names and definitions
2012-06-06
(Revision of ISO 6938:1984)
TC 41
ISO
9856:2003/FDAmd
1
Pulleys and belts (including veebelts)
*
TC 44
ISO
5172:2006/FDAmd
1
2012-06-06
Welding and allied processes
*
TC 45
ISO/FDIS 18898
Conveyor belts — Determination of elastic and permanent elongation and calculation of elastic
modulus — Amendment 1
Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications and
tests — Amendment 1
2012-06-27
Rubber and rubber products
*
Rubber — Calibration and verification of hardness testers
2012-06-21
(Revision of ISO 18898:2006)
ISO/FDIS 27588
*
Rubber, vulcanized or thermoplastic — Determination of dead-load hardness using the very low
rubber hardness (VLRH) scale
2012-06-12
(Revision of ISO 27588:2008)
ISO/FDIS 4652
*
Rubber compounding ingredients — Carbon black — Determination of specific surface area by
nitrogen adsorption methods — Single-point procedures
2012-06-04
(Revision of ISO 4652-1:1994)
ISO 111931:2008/FDAmd 1
*
TC 54
ISO/FDIS 3528
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or
rubber solution — Amendment 1
2012-06-13
Essential oils
*
Essential oil of mandarin, Italian type (Citrus reticulata Blanco)
2012-06-03
(Revision of ISO 3528:1997, ISO 3528:1997/Cor 1:1998)
TC 59
ISO/FDIS 6927
Buildings and civil engineering works
*
Buildings and civil engineering works — Sealants — Vocabulary
2012-06-06
(Revision of ISO 6927:1981)
TC 61
Plastics
ISO 16281:2009/FDAmd 1
*
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers
— Part 1: General principles — Amendment 1
2012-06-13
ISO/FDIS 16014-1
*
Plastics — Determination of average molecular mass and molecular mass distribution of polymers
using size-exclusion chromatography — Part 1: General principles
2012-06-06
(Revision of ISO 16014-1:2003, ISO 16014-1:2003/Cor 1:2005)
ISO/FDIS 16014-2
*
Plastics — Determination of average molecular mass and molecular mass distribution of polymers
using size-exclusion chromatography — Part 2: Universal calibration method
2012-06-06
(Revision of ISO 16014-2:2003)
ISO/FDIS 16014-3
*
Plastics — Determination of average molecular mass and molecular mass distribution of polymers
using size-exclusion chromatography — Part 3: Low-temperature method
2012-06-06
(Revision of ISO 16014-3:2003)
ISO/FDIS 16014-4
*
Plastics — Determination of average molecular mass and molecular mass distribution of polymers
using size-exclusion chromatography — Part 4: High-temperature method
2012-06-06
(Revision of ISO 16014-4:2003)
ISO/FDIS 16014-5
*
Plastics — Determination of average molecular mass and molecular mass distribution of polymers
using size-exclusion chromatography — Part 5: Method using light-scattering detection
2012-06-06
ISO/FDIS 17556
*
Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by
measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
2012-06-20
(Revision of ISO 17556:2003)
ISO/FDIS 3673-2
*
Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of
crosslinked epoxy resins
2012-06-27
(Revision of ISO 3673-2:2007)
TC 68
ISO/FDIS 20022-1
Financial services
*
Financial services — Universal financial industry message scheme — Part 1: Metamodel
2012-06-05
(Revision of ISO 20022-1:2004)
ISO/FDIS 20022-2
*
Financial services — Universal financial industry message scheme — Part 2: UML profile
2012-06-05
(Revision of ISO 20022-2:2007)
ISO/FDIS 20022-3
*
Financial services — Universal financial industry message scheme — Part 3: Modelling
2012-06-05
(Revision of ISO/TS 20022-3:2004)
ISO/FDIS 20022-4
*
Financial services — Universal financial industry message scheme — Part 4: XML Schema
generation
2012-06-05
(Revision of ISO/TS 20022-4:2004)
ISO/FDIS 20022-5
*
Financial services — Universal financial industry message scheme — Part 5: Reverse engineering
2012-06-05
(Revision of ISO/TS 20022-5:2004)
ISO/FDIS 20022-6
*
Financial services — Universal financial industry message scheme — Part 6: Message transport
characteristics
2012-06-05
(Revision of ISO 20022-6:2009)
ISO/FDIS 20022-7
*
Financial services — Universal financial industry message scheme — Part 7: Registration
2012-06-05
ISO/FDIS 20022-8
*
Financial services — Universal financial industry message scheme — Part 8: ASN.1 generation
2012-06-05
TC 79
ISO/FDIS 6362-1
Light metals and their alloys
*
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1:
Technical conditions for inspection and delivery
2012-06-12
(Revision of ISO 6362-1:1986)
ISO/FDIS 6362-2
*
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2:
Mechanical properties
2012-06-12
(Revision of ISO 6362-2:1990)
ISO/FDIS 6362-3
*
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3:
Extruded rectangular bars — Tolerances on shape and dimensions
2012-06-12
(Revision of ISO 6362-3:2001)
ISO/FDIS 6362-4
*
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4:
Profiles — Tolerances on shape and dimensions
2012-06-12
(Revision of ISO 6362-4:1988)
ISO/FDIS 6362-5
*
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5:
Round, square and hexagonal bars — Tolerances on shape and dimensions
2012-06-12
(Revision of ISO 6362-5:2001)
ISO/FDIS 6362-6
*
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6:
Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions
2012-06-12
ISO/FDIS 6362-7
*
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7:
Chemical composition
2012-06-12
ISO/FDIS 6363-1
*
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1:
2012-06-26
Technical conditions for inspection and delivery
(Revision of ISO 6363-1:1988, ISO 6365-1:1988)
ISO/FDIS 6363-2
*
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars and tubes and wires — Part 2:
Mechanical properties
2012-06-26
(Revision of ISO 6363-2:1993)
ISO/FDIS 6363-3
*
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 3:
Drawn round bars and wires — Tolerances on form and dimensions (symmetric plus and minus
tolerances on diameter)
2012-06-26
(Revision of ISO 5193:1981)
ISO/FDIS 6363-4
*
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 4:
Drawn rectangular bars and wires — Tolerances on form and dimensions
2012-06-26
(Revision of ISO 6363-4:1991)
ISO/FDIS 6363-5
*
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 5:
Drawn square and hexagonal bars and wires — Tolerances on form and dimensions
2012-06-26
(Revision of ISO 6363-5:1992)
ISO/FDIS 6363-6
*
TC 96
ISO/FDIS 12488-1
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 6:
Drawn round tubes — Tolerances on form and dimensions
2012-06-26
Cranes
*
Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
2012-06-05
(Revision of ISO 12488-1:2005, ISO 12488-1:2005/Cor 1:2008)
TC 106
Dentistry
ISO/FDIS 13017
*
Dentistry — Magnetic attachments
2012-06-27
ISO/FDIS 13504
*
Dentistry — General requirements for instruments and related accessories used in dental implant
placement and treatment
2012-06-27
TC 110
Industrial trucks
ISO/FDIS 10896-1
*
Rough-terrain trucks — Safety requirements and verification — Part 1: Variable-reach trucks
2012-06-04
ISO/FDIS 11525-1
*
Rough-terrain trucks - User requirements — Part 1: General requirements
2012-06-04
TC 114
ISO/FDIS 13074
Horology
*
TC 118
ISO
20643:2005/FDAm
d1
2012-06-20
Compressors and pneumatic tools, machines and equipment
*
TC 119
ISO/FDIS 13944
Analogue quartz clocks — Fitting dimensions of movements to hands
Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of
vibration emission — Amendment 1: Accelerometer positions
2012-06-20
Powder metallurgy
*
Lubricated metal-powder mixes — Determination of lubricant content — Soxhlet extraction method
2012-07-13
(Revision of ISO 13944:1996)
TC 121
ISO
8359:1996/FDAmd
1
Anaesthetic and respiratory equipment
*
TC 127
ISO/FDIS 13459
Oxygen concentrators for medical use — Safety requirements — Amendment 1
2012-06-13
Earth-moving machinery
*
Earth-moving machinery — Trainer seat — Deflection limiting volume, space envelope and
performance requirements
(Revision of ISO 13459:1997)
2012-06-20
TC 131
ISO
10100:2001/FDAm
d1
Fluid power systems
*
TC 146
Hydraulic fluid power — Cylinders — Acceptance tests — Amendment 1
2012-06-11
Air quality
ISO/FDIS 22262-1
*
Air quality — Bulk materials — Part 1: Sampling and qualitative determination of asbestos in
commercial bulk materials
2012-06-06
ISO/FDIS 12219-1
*
Interior air of road vehicles — Part 1: Whole vehicle test chamber — Specification and method for
the determination of volatile organic compounds in cabin interiors
2012-06-24
TC 147
ISO/FDIS 14403-1
Water quality
*
Water quality — Determination of total cyanide and free cyanide using flow analysis (FIA and CFA)
— Part 1: Method using flow injection analysis (FIA)
2012-06-13
(Revision of ISO 14403:2002)
ISO/FDIS 14403-2
*
Water quality — Determination of total cyanide and free cyanide using flow analysis (FIA and CFA)
— Part 2: Method using continuous flow analysis (CFA)
2012-06-13
(Revision of ISO 14403:2002)
ISO/FDIS 10870
*
Water quality — Guidelines for the selection of sampling methods and devices for benthic
macroinvertebrates in fresh waters
2012-06-20
(Revision of ISO 7828:1985, ISO 8265:1988, ISO 9391:1993)
TC 156
ISO/FDIS 14802
Corrosion of metals and alloys
*
TC 163
ISO/FDIS 18393-1
2012-06-28
Thermal performance and energy use in the built environment
*
TC 164
ISO/FDIS 4965-1
Corrosion of metals and alloys — Guidelines for applying statistics to analysis of corrosion data
Thermal insulation products — Determination of ageing by settlement — Part 1: Blown loose-fill
insulation for ventilated attics
2012-06-18
Mechanical testing of metals
*
Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 1: Testing systems
2012-06-26
(Revision of ISO 4965:1979)
ISO/FDIS 4965-2
*
Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 2: Dynamic
calibration device (DCD) instrumentation
2012-06-26
(Revision of ISO 4965:1979)
TC 171
ISO/FDIS 14289-1
Document management applications
*
TC 172
Document management applications — Electronic document file format enhancement for
accessibility — Part 1: Use of ISO 32000-1 (PDF/UA-1)
2012-06-24
Optics and photonics
ISO/FDIS 23584-2
*
Optics and photonics — Specification of reference dictionary — Part 2: Classes' and properties'
definitions
2012-06-26
ISO/FDIS 11987
*
Ophthalmic optics — Contact lenses — Determination of shelf-life
2012-06-27
(Revision of ISO 11987:1997, ISO 11987:1997/Cor 1:1998)
TC 190
ISO/FDIS 15685
Soil quality
*
Soil quality — Determination of potential nitrification and inhibition of nitrification — Rapid test by
ammonium oxidation
(Revision of ISO 15685:2004)
TC 194
Biological evaluation of medical devices
2012-06-19
ISO/FDIS 1099312
*
Biological evaluation of medical devices — Part 12: Sample preparation and reference materials
2012-06-13
(Revision of ISO 10993-12:2007)
TC 206
Fine ceramics
ISO/FDIS 14627
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture
resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation
fracture (IF) method
2012-06-28
ISO/FDIS 14628
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for rolling
contact fatigue of silicon nitride ceramics at room temperature by balls-on-flat method
2012-06-28
TC 213
Dimensional and geometrical product specifications and verification
ISO/FDIS 13102
*
Geometrical product specifications (GPS) — Dimensional measuring equipment: Electronic digitalindicator gauge — Design and metrological characteristics
2012-06-20
ISO/FDIS 25178-3
*
Geometrical product specifications (GPS) — Surface texture: Areal — Part 3: Specification
operators
2012-06-06
TC 215
Health informatics
ISO/IEEE FDIS
11073-10420
*
Health informatics — Personal health device communication — Part 10420: Device specialization
— Body composition analyzer
2012-09-20
ISO/IEEE FDIS
11073-10421
*
Health informatics — Personal health device communication — Part 10421: Device specialization
— Peak expiratory flow monitor (peak flow)
2012-09-20
ISO/IEEE FDIS
11073-10472
*
Health Informatics — Personal health device communication — Part 10472: Device specialization
— Medication monitor
2012-09-20
ISO/IEEE FDIS
11073-30400
*
Health informatics — Point-of-care medical device communication — Part 30400: Interface profile
— Cabled Ethernet
2012-09-20
TC 219
ISO/FDIS 6356
Floor coverings
*
Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test
2012-06-28
(Revision of ISO 6356:2000)
TC 234
ISO/FDIS 12878
Fisheries and aquaculture
*
TC 239
ISO/FDIS 14452
2012-06-21
Project Committee: Network services billing
*
JTC 1
ISO/IEC FDIS
21481
Environmental monitoring of the impacts from marine finfish farms on soft bottom
Network services billing — Requirements
2012-06-13
Information technology
*
Information technology — Telecommunications and information exchange between systems —
Near Field Communication Interface and Protocol -2 (NFCIP-2)
2012-06-17
(Revision of ISO/IEC 21481:2005)
ISO/IEC FDIS
15045-2
*
Information technology — Home Electronic System (HES) gateway — Part 2: Modularity and
protocol
2012-06-03
ISO/IEC FDIS
15067-3
*
Information technology — Home Electronic System (HES) application model — Part 3: Model of a
demand-response energy management system for HES
2012-06-03
(Revision of ISO/IEC TR 15067-3:2000)
ISO/IEC FDIS
18012-2
*
Information technology — Home Electronic System — Guidelines for product interoperability — Part
2: Taxonomy and application interoperability model
2012-06-03
ISO/IEC FDIS
27032
*
Information technology — Security techniques — Guidelines for cybersecurity
2012-06-27
ISO/IEC 1449622:2009/FDAmd 2
*
Information technology — Coding of audio-visual objects — Part 22: Open Font Format —
Amendment 2: Additional script and language tags
2012-06-06
ISO/IEC 154442:2004/FDAmd 4
*
Information technology — JPEG 2000 image coding system: Extensions — Part 2: — Amendment
4: Block coder extension
2012-06-06
Standards published
New International Standards published between 01 April and 30 April 2012
* Available in English only
** French version of standard previously published in English only
Price group
CIE
ISO 11664-3:2012
International Commission on Illumination
* Colorimetry — Part 3: CIE tristimulus values
IIW
International Institute of Welding
ISO 3690:2012
Welding and allied processes — Determination of hydrogen content in arc weld metal
ISO
14271:2011/Cor
1:2012
* Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot,
projection, and seam welds — Technical Corrigendum 1
TC 2
Fasteners
ISO 888:2012
Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths
TC 22
Road vehicles
E
L
free
C
ISO 11446-2:2012
* Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Part 2: 13-pole
connectors for vehicles with 12 V nominal supply voltage intended to cross water fords
B
ISO/TR 8713:2012
* Electrically propelled road vehicles — Vocabulary
E
ISO 15500-2:2012
* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2: Performance and
general test methods
D
ISO 15500-3:2012
* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 3: Check valve
B
ISO 15500-4:2012
* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 4: Manual valve
C
ISO 15500-5:2012
* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 5: Manual cylinder
valve
B
ISO 15500-6:2012
* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 6: Automatic valve
C
ISO 15500-9:2012
* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 9: Pressure regulator
C
ISO 15500-13:2012
* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 13: Pressure relief
device (PRD)
F
ISO 15500-14:2012
* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 14: Excess flow valve
C
ISO 15500-16:2012
* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 16: Rigid fuel line in
stainless steel
B
ISO 15500-17:2012
* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 17: Flexible fuel line
C
ISO 15500-18:2012
* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 18: Filter
B
ISO 15500-19:2012
* Road vehicles — Compressed natural gas (CNG) fuel system components — Part 19: Fittings
B
TC 23
Tractors and machinery for agriculture and forestry
ISO 37671:1998/Amd 2:2012
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for
operator controls and other displays — Part 1: Common symbols — Amendment 2: Additional symbols
concerning the engine emissions system and diesel exhaust fluid
TC 28
Petroleum products and lubricants
ISO 16591:2010
Petroleum products — Determination of sulfur content — Oxidative microcoulometry method
TC 29
Small tools
ISO 5429:2012
Coated abrasives — Flap wheels with incorporated flanges or separate flanges
TC 38
Textiles
ISO/TS
14909:2012
Fibre ropes for offshore stationkeeping — High modulus polyethylene (HMPE)
T
ISO 4920:2012
Textile fabrics — Determination of resistance to surface wetting (spray test)
D
ISO 6330:2012
Textiles — Domestic washing and drying procedures for textile testing
Q
TC 42
Photography
ISO 18936:2012
* Imaging materials — Processed colour photographs — Methods for measuring thermal stability
ISO 18944:2012
* Imaging materials — Reflection colour photographic prints — Test print construction and measurement
TC 43
Acoustics
ISO 26101:2012
Acoustics — Test methods for the qualification of free-field environments
ISO
5130:2007/Amd
1:2012
* Acoustics — Measurements of sound pressure level emitted by stationary road vehicles — Amendment 1
TC 44
Welding and allied processes
ISO 17653:2012
Resistance welding — Destructive tests on welds in metallic materials — Torsion test of resistance spot
welds
TC 45
Rubber and rubber products
ISO 248-2:2012
* Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an
automatic analyser with an infrared drying unit
ISO 127:2012
Rubber, natural latex concentrate — Determination of KOH number
ISO
1138:2007/Amd
1:2012
Rubber compounding ingredients — Carbon black — Determination of sulfur content — Amendment 1:
Clarification of digestion temperature in Subclause 3.4.5
TC 46
Information and documentation
ISO/TR
11219:2012
* Information and documentation - Qualitative conditions and basic statistics for library buildings — Space,
function and design
XZ
H
B
J
M
L
XZ
C
E
E
XZ
XB
ISO 26324:2012
Information and documentation — Digital object identifier system
J
ISO 27730:2012
Information and documentation — International standard collection identifier (ISCI)
E
TC 61
ISO 9352:2012
Plastics
* Plastics — Determination of resistance to wear by abrasive wheels
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries
ISO 104261:2009/Cor 2:2012
Petroleum and natural gas industries — Cements and materials for well cementing — Part 1:
Specification — Technical Corrigendum 2
ISO 28781:2010
Petroleum and natural gas industries — Drilling and production equipment --Subsurface barrier valves
and related equipment
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical and
pharmaceutical use
ISO 13926-3:2012
Pen systems — Part 3: Seals for pen-injectors for medical use
TC 79
Light metals and their alloys
ISO/TR
16689:2012
* Anodizing of aluminium and its alloys — Experimental research on possible alternative sealing quality
test methods to replace the phosphoric acid/chromic acid immersion test — Evaluation of correlations
TC 86
Refrigeration and air-conditioning
ISO 239532:2005/Amd 1:2012
Refrigerated display cabinets — Part 2: Classification, requirements and test conditions — Amendment 1
TC 94
Personal safety -- Protective clothing and equipment
ISO 17491-2:2012
* Protective clothing — Test methods for clothing providing protection against chemicals — Part 2:
Determination of resistance to inward leakage of aerosols and gases (inward leakage test)
TC 104
Freight containers
ISO 18186:2011
Freight containers — RFID cargo shipment tag system
TC 108
Mechanical vibration, shock and condition monitoring
E
free
T
D
P
T
G
E
ISO 20283-4:2012
* Mechanical vibration — Measurement of vibration on ships — Part 4: Measurement and evaluation of
vibration of the ship propulsion machinery
K
ISO 2954:2012
* Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for
measuring vibration severity
G
TC 112
Vacuum technology
ISO 21360-1:2012
Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 1: General
description
M
ISO 21360-2:2012
Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 2: Positive
displacement vacuum pumps
H
TC 115
Pumps
ISO 9906:2012
Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3
TC 118
Compressors and pneumatic tools, machines and equipment
ISO 11148-10:2011
TC 120
ISO 11396:2012
TC 138
ISO 1452-3:2009
* Hand-held non-electric power tools — Safety requirements — Part 10: Compression power tools
U
K
Leather
* Crocodile skins — Presentation, description of defects, grading on the basis of defects, size (length) and
origin
C
Plastics pipes, fittings and valves for the transport of fluids
* Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under
pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings
R
ISO 1452-5:2009
* Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under
pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system
TC 145
Graphical symbols
ISO
7010:2011/Amd
1:2012
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 1
TC 147
Water quality
ISO 12846:2012
Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with
and without enrichment
TC 150
Implants for surgery
ISO 6474-2:2012
Implants for surgery — Ceramic materials — Part 2: Composite materials based on a high-purity alumina
matrix with zirconia reinforcement
ISO/TS
23810:2012
* Cardiovascular implants and artificial organs — Checklist for preoperative extracorporeal circulation
equipment setup
ISO/TS
10974:2012
* Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical
device
TC 159
ISO/TS 9241411:2012
* Ergonomics of human-system interaction — Part 411: Evaluation methods for the design of physical input
devices
Optics and photonics
ISO 9022-1:2012
Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
ISO 9022-22:2012
* Optics and photonics — Environmental test methods
temperature change with bump or random vibration
ISO 16331-1:2012
* Optics and optical instruments — Laboratory procedures for testing surveying and construction
instruments — Part 1: Performance of handheld laser distance meters
ISO/TS 8000311:2012
— Part 22: Combined cold, dry heat or
* Data quality — Part 311: Guidance for the application of product data quality for shape (PDQ-S)
Soil quality
ISO 10930:2012
Soil quality — Measurement of the stability of soil aggregates subjected to the action of water
TC 201
Surface chemical analysis
TC 204
H
F
E
XC
V
D
D
Q
Automation systems and integration
TC 190
ISO 16129:2012
XZ
Ergonomics
TC 172
TC 184
G
* Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for assessing the day-today performance of an X-ray photoelectron spectrometer
V
G
J
Intelligent transport systems
ISO 13183:2012
* Intelligent transport systems — Communications access for land mobiles (CALM) — Using broadcast
communications
J
ISO/TS 266832:2012
* Intelligent transport systems — Freight land conveyance content identification and communication (FLCCIC) — Part 2: Application interface profiles
R
TC 205
ISO 11855-5:2012
TC 211
ISO/TS 191352:2012
Building environment design
* Building environment design — Design , dimensioning, installation and control of embedded radiant
heating and cooling systems — Part 5: Installation
E
Geographic information/Geomatics
* Geographic information - Procedures for item registration — Part 2: XML schema implementation
D
TC 213
ISO 1101:2012
Dimensional and geometrical product specifications and verification
* Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation,
location and run-out
ISO 13225:2012
Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges —
Design and metrological characteristics
TC 227
Springs
ISO 11891:2012
JTC 1
* Hot formed helical compression springs — Technical specifications
XA
L
E
Information technology
ISO/IEC 195001:2012
* Information technology — Object Management Group — Common Object Request Broker Architecture
(CORBA) — Part 1: Interfaces
XC
ISO/IEC 195002:2012
* Information technology — Object Management Group — Common Object Request Broker Architecture
(CORBA) — Part 2: Interoperability
XC
ISO/IEC 195003:2012
* Information technology — Object Management Group — Common Object Request Broker Architecture
(CORBA) — Part 3: Components
XC
ISO/IEC 195051:2012
* Information technology — Object Management Group Unified Modeling Language (OMG UML) — Part 1:
Infrastructure
XC
ISO/IEC 195052:2012
* Information technology — Object Management Group Unified Modeling Language (OMG UML) — Part 2:
Superstructure
XC
ISO/IEC
19506:2012
* Information technology — Object Management Group Architecture-Driven Modernization (ADM) —
Knowledge Discovery Meta-Model (KDM)
XC
ISO/IEC
19507:2012
* Information technology — Object Management Group Object Constraint Language (OCL)
XC
ISO/IEC 103736:2011/Amd 1:2012
* Identification cards — Test methods — Part 6: Proximity cards — Amendment 1: Additional PICC classes
XZ
ISO/IEC 144431:2008/Amd 1:2012
* Identification cards — Contactless integrated circuit cards — Proximity cards — Part 1: Physical
characteristics — Amendment 1: Additional PICC classes
XZ
ISO/IEC 247891:2012
* Identification cards — Card service life — Part 1: Application profiles and requirements
ISO/IEC
30170:2012
* Information technology — Programming languages — Ruby
XC
ISO/IEC 144965:2001/Amd
31:2012
* Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment
31: Reference software for efficient representation of 3D meshes with multiple attributes
XZ
ISO/IEC 1449610:2012
* Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding
XC
ISO/IEC 1449627:2009/Amd
4:2012
* Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance —
Amendment 4: Conformance for efficient representation of 3D meshes with multiple attributes
XZ
ISO/IEC 1449628:2012
* Information technology — Coding of audio-visual objects — Part 28: Composite font representation
L
ISO/IEC 2300012:2010/Amd
2:2012
* Information technology — Multimedia application format (MPEG-A) — Part 12: Interactive music
application format — Amendment 2: Compact representation of dynamic volume change and audio
equalization
XZ
ISO/IEC 230031:2007/Amd
1:2008/Cor 2:2012
* Information technology — MPEG audio technologies — Part 1: MPEG Surround — Amendment 1:
Conformance testing — Technical Corrigendum 2
free
ISO/IEC 230091:2012
* Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation
description and segment formats
ISO/IEC 24800-
* Information technology — JPSearch — Part 6: Reference software
T
XB
Q
6:2012
ISO/IEC
29178:2012
* Information technology — Mobile item identification and management — Service broker for Mobile AIDC
services
F
ISO/IEC
29136:2012
* Information technology — User interfaces — Accessibility of personal computer hardware
M
ISO/IEC 238236:2008/Cor
1:2012
* Information technology — Vocabulary — Part 36: Learning, education and training — Technical
Corrigendum 1
ISO/IEC TR 127853:2012
* Information technology — Learning, education, and training — Content packaging — Part 3: Best practice
and implementation guide
L
ISO/IEC 197885:2012
* Information technology — Learning, education and training — Metadata for learning resources — Part 5:
Educational elements
Q
ISO/IEC 197949:2011/Cor 1:2012
* Information technology — Biometric data interchange formats — Part 9: Vascular image data —
Technical Corrigendum 1
ISO/IEC 291095:2012
* Information technology — Conformance testing methodology for biometric data interchange formats
defined in ISO/IEC 19794 — Part 5: Face image data
Standards confirmed
The following International Standards are confimred for a five year period:
TC 17
Steel
ISO 3763:1976
(reconfirmed)
ISO 1005-2:1986
(reconfirmed)
ISO 1005-4:1986
(reconfirmed)
ISO 1005-8:1986
(reconfirmed)
ISO 1005-9:1986
(reconfirmed)
ISO 6933:1986
(reconfirmed)
TC 20
Aircraft and space vehicles
ISO 46:1973
(reconfirmed)
ISO 244:1979
(reconfirmed)
ISO 268:1980
(reconfirmed)
ISO 1971:1975
(reconfirmed)
ISO 2669:1995
(reconfirmed)
ISO 7137:1995
(reconfirmed)
ISO 8074:1985
(reconfirmed)
ISO 8075:1985
(reconfirmed)
ISO 8080:1985
(reconfirmed)
ISO 8081:1985
(reconfirmed)
free
free
M
ISO 9736:2000
(reconfirmed)
ISO 9737:2000
(reconfirmed)
ISO 9738:2000
(reconfirmed)
ISO 9747:2000
(reconfirmed)
ISO 9748:2000
(reconfirmed)
ISO 9749:2000
(reconfirmed)
ISO 9757:2000
(reconfirmed)
ISO 9758:2000
(reconfirmed)
ISO 9759:2000
(reconfirmed)
ISO 9760:2000
(reconfirmed)
ISO 9761:2000
(reconfirmed)
ISO 9762:2000
(reconfirmed)
ISO 1151-7:1985
(reconfirmed)
TC 22
Road vehicles
ISO 22900-1:2008
ISO 22901-1:2008
ISO 25981:2008
ISO 26021-1:2008
ISO 26021-2:2008
ISO 4040:2009
ISO 15008:2009
ISO 7400:1990
(reconfirmed)
ISO 8052:1990
(reconfirmed)
ISO 8645:1988
(reconfirmed)
ISO 8706:1990
(reconfirmed)
ISO 9043:2008
ISO 9132:1990
(reconfirmed)
TC 23
Tractors and machinery for agriculture and forestry
ISO 3835-1:1976
(reconfirmed)
ISO 3835-4:1981
(reconfirmed)
ISO 4197:1989
(reconfirmed)
ISO 5680:1979
(reconfirmed)
ISO 5691:1981
(reconfirmed)
ISO 5713:1990
(reconfirmed)
ISO 6720:1989
(reconfirmed)
ISO 6880:1983
(reconfirmed)
ISO 7224:1983
(reconfirmed)
ISO 8945:1989
(reconfirmed)
TC 28
Petroleum products and lubricants
ISO 2137:2007
ISO 2176:1995
(reconfirmed)
ISO 2592:2000
(reconfirmed)
ISO 3648:1994
(reconfirmed)
ISO 3837:1993
(reconfirmed)
ISO 3839:1996
(reconfirmed)
ISO 4256:1996
(reconfirmed)
ISO 4264:2007
ISO 6245:2001
(reconfirmed)
ISO 6251:1996
(reconfirmed)
ISO 6293-1:1996
(reconfirmed)
ISO 6614:1994
(reconfirmed)
ISO 6617:1994
(reconfirmed)
ISO 6619:1988
(reconfirmed)
ISO 7120:1987
(reconfirmed)
ISO 8691:1994
(reconfirmed)
ISO 9950:1995
(reconfirmed)
ISO 10478:1994
(reconfirmed)
ISO 11009:2000
(reconfirmed)
ISO 12205:1995
(reconfirmed)
ISO 13757:1996
(reconfirmed)
ISO 13758:1996
(reconfirmed)
ISO 13759:1996
(reconfirmed)
ISO 14596:2007
ISO 15597:2001
(reconfirmed)
ISO 15911:2000
(reconfirmed)
TC 29
Small tools
ISO 9524:1993
(reconfirmed)
TC 33
Refractories
ISO 10058-1:2008
ISO 10058-2:2008
ISO 10058-3:2008
ISO 20565-1:2008
ISO 20565-2:2008
ISO 20565-3:2008
TC 34
Food products
ISO 6495:1999
ISO 13906:2008
ISO 5492:2008
ISO 11036:1994
(reconfirmed)
ISO 13302:2003
TC 35
Paints and varnishes
ISO 8130-1:1992
(reconfirmed)
ISO 8130-2:1992
(reconfirmed)
ISO 8130-3:1992
(reconfirmed)
ISO 8130-4:1992
(reconfirmed)
ISO 8130-5:1992
(reconfirmed)
ISO 8130-6:1992
(reconfirmed)
ISO 8130-9:1992
(reconfirmed)
ISO 8130-11:1997
(reconfirmed)
ISO 28199-1:2009
ISO 28199-2:2009
ISO 28199-3:2009
TC 51
Pallets for unit load method of materials handling
ISO 12776:2008
TC 59
Buildings and civil engineering works
ISO 3443-1:1979
(reconfirmed)
ISO 3443-2:1979
(reconfirmed)
ISO 3443-4:1986
(reconfirmed)
ISO 3443-6:1986
(reconfirmed)
ISO 3443-7:1988
(reconfirmed)
ISO 3443-8:1989
(reconfirmed)
ISO 3447:1975
(reconfirmed)
ISO 4463-1:1989
(reconfirmed)
ISO 4463-2:1995
(reconfirmed)
ISO 4463-3:1995
(reconfirmed)
ISO 6589:1983
(reconfirmed)
ISO 7078:1985
ISO 7727:1984
(reconfirmed)
ISO 7728:1985
(reconfirmed)
ISO 7729:1985
(reconfirmed)
ISO 7844:1985
(reconfirmed)
ISO 7845:1985
(reconfirmed)
ISO 7976-1:1989
(reconfirmed)
ISO 7976-2:1989
(reconfirmed)
ISO 9882:1993
(reconfirmed)
ISO 9883:1993
(reconfirmed)
TC 63
Glass containers
ISO 9057:1991
(reconfirmed)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries
ISO 13535:2000
TC 68
Financial services
ISO 8109:1990
(reconfirmed)
ISO 8532:1995
(reconfirmed)
ISO 9019:1995
(reconfirmed)
ISO 9144:1991
(reconfirmed)
ISO 15022-1:1999
ISO 15022-2:1999
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 4037-1:1996
(reconfirmed)
ISO 14152:2001
(reconfirmed)
TC 106
Dentistry
ISO 7786:2001
(reconfirmed)
ISO 7787-1:1984
(reconfirmed)
ISO 7787-2:2000
(reconfirmed)
ISO 7787-3:1991
(reconfirmed)
ISO 9873:1998
(reconfirmed)
ISO 13295:2007
ISO 13397-1:1995
(reconfirmed)
ISO 13397-3:1996
(reconfirmed)
ISO 15087-2:2000
(reconfirmed)
ISO 15087-3:2000
(reconfirmed)
ISO 15087-4:2000
(reconfirmed)
ISO 15087-5:2000
(reconfirmed)
ISO 15087-6:2000
(reconfirmed)
ISO 22374:2005
TC 107
Metallic and other inorganic coatings
ISO 14919:2001
TC 131
Fluid power systems
ISO 6537:1982
(reconfirmed)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 21003-1:2008
ISO 21003-2:2008
ISO 21003-3:2008
ISO 21003-5:2008
TC 159
Ergonomics
ISO 9241-300:2008
ISO 9241-304:2008
TC 164
Mechanical testing of metals
ISO 7500-1:2004
(reconfirmed)
TMB
Technical Management Board
ISO 25639-1:2008
ISO 25639-2:2008
JTC 1
Information technology
ISO/IEC 17345:2006
ISO/IEC 22533:2005
ISO/IEC 23912:2005
ISO/IEC 25435:2006
Standards withdrawn
Period from 01 April to 30 April 2012
TC 20
Aircraft and space vehicles
ISO 1022:1988
(replaced by ISO 8775:1988)
TC 22
Road vehicles
ISO 11446:2004
(replaced by ISO 11446-1:2012, ISO 11446-2:2012)
ISO 6549:1999
(replaced by )
ISO 8713:2005
(replaced by ISO/TR 8713:2012)
TC 112
Vacuum technology
ISO 1607-1:1993
(replaced by ISO 21360-2:2012)
ISO 1607-2:1989
(replaced by ISO 21360-2:2012)
ISO 21360:2007
(replaced by ISO 21360-1:2012)
TC 147
Water quality
ISO 5666:1999
(replaced by ISO 12846:2012)
ISO 16590:2000
(replaced by ISO 12846:2012)
TC 150
Implants for surgery
ISO 5837-2:1980
(replaced by )
TC 159
Ergonomics
ISO 9241-4:1998
(replaced by ISO/TS 9241-411:2012)
ISO 9241-9:2000
(replaced by ISO/TS 9241-411:2012)
TC 172
Optics and photonics
ISO 9022-10:1998
(replaced by ISO 9022-22:2012)
ISO 9022-13:1998
(replaced by ISO 9022-22:2012)
ISO 9022-15:1998
(replaced by ISO 9022-22:2012)
ISO 9022-16:1998
(replaced by ISO 9022-22:2012)
ISO 9022-19:1994
(replaced by ISO 9022-22:2012)
TC 184
Automation systems and integration
ISO 10303-41:1994
(replaced by )
ISO 10303-42:1994
(replaced by )
ISO 10303-43:1994
(replaced by )
ISO 10303-203:1994
(replaced by )
ISO/TS 10303-203:2005
(replaced by ISO 10303-203:2011)
ISO 10303-203:1994/Amd
1:2000
(replaced by )
ISO/TS 10303-1050:2005
(replaced by )
ISO/TS 10303-1051:2005
(replaced by )
ISO/TS 10303-1111:2005
(replaced by )
TC 213
Dimensional and geometrical product specifications and verification
ISO 10578:1992
(replaced by ISO 1101:2012)
Meeting calendar
(update at 01 April 2012)
Meetings called for the month of May are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
May-June 2012
28-1
Helsinki
(Finland)
**
TC 35
Paints and varnishes
28-1
Helsinki
(Finland)
**
TC 35/SC 9
Paints and varnishes/General test methods for paints and varnishes
28-1
Helsinki
(Finland)
**
TC 35/SC 12
Paints and varnishes/Preparation of steel substrates before application of paints and related
products
28-1
Helsinki
(Finland)
**
TC 35/SC 14
Paints and varnishes/Protective paint systems for steel structures
28-1
Milan (Italy)
TC 173/SC 1
Assistive products for persons with disability/Wheelchairs
28-1
Bogota
(Colombia)
TC 223
Societal security
31-5
Berlin (Germany)
JTC 1/SC 32
Information technology/Data management and interchange
31-1
Paris (France)
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
31-1
London (United
Kingdom)
TC 67/SC 6
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Processing equipment and systems
June 2012
4-5
Berlin (Germany)
TC 44/SC 3
Welding and allied processes/Welding consumables
4-7
Paris (France)
TC 85/SC 5
Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle
4-7
Paris (France)
TC 85/SC 6
Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
4-8
Tel Aviv (Israel)
TC 34/SC 5
Food products/Milk and milk products
5-6
Paris (France)
TC 265
Carbon capture and storage (CCS)
7
Berlin (Germany)
TC 44/SC 7
Welding and allied processes/Representation and terms
7
Paris (France)
TC 85/SC 2
Nuclear energy, nuclear technologies, and radiological protection/Radiological protection
7-8
Toulouse
(France)
TC 211
Geographic information/Geomatics
8
Paris (France)
TC 85
Nuclear energy, nuclear technologies, and radiological protection
8
Incheon (Korea,
Republic of)
TC 94/SC 14
Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
9
Berlin (Germany)
TC 96
Cranes
10-15
Stockholm
(Sweden)
TC 184/SC 4
Automation systems and integration/Industrial data
11-13
Woods Hole
(USA)
TC 43/SC 3
Acoustics/Underwater acoustics
11-13
Dresden
(Germany)
TC 126
Tobacco and tobacco products
11-15
Kyoto (Japan)
TC 121
Anaesthetic and respiratory equipment
11-15
Kyoto (Japan)
TC 121/SC 1
Anaesthetic and respiratory equipment/Breathing attachments and anaesthetic machines
11-15
Kyoto (Japan)
TC 121/SC 2
Anaesthetic and respiratory equipment/Airways and related equipment
11-15
Kyoto (Japan)
TC 121/SC 3
Anaesthetic and respiratory equipment/Lung ventilators and related equipment
11-15
Kyoto (Japan)
TC 121/SC 4
Anaesthetic and respiratory equipment/Terminology and semantics
11-15
Kyoto (Japan)
TC 121/SC 6
Anaesthetic and respiratory equipment/Medical gas systems
11-15
Kyoto (Japan)
TC 121/SC 8
Anaesthetic and respiratory equipment/Suction devices for hospital and emergency care use
11-15
Paris (France)
TC 156
Corrosion of metals and alloys
11-15
Stresa (Italy)
TC 229
Nanotechnologies
11-15
Prague (Czech
Republic)
TC 251
Project committee: Asset management
11-16
La Plaine StDenis (France)
TC 147
Water quality
12-13
La Plaine StDenis (France)
TC 17/SC 17
Steel/Steel wire rod and wire products
12-13
Troy (USA)
TC 22/SC 11
Road vehicles/Safety glazing materials
12-13
Kettering (United
Kingdom)
TC 137
Footwear sizing designations and marking systems
13
Brugge
(Belgium)
TC 86/SC 6
Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
13
La Plaine StDenis (France)
TC 147/SC 3
Water quality/Radiological methods
13-14
Geneva
(Switzerland)
TMB
Technical Management Board
14
Westminster,
Colorado (USA)
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and completion fluids, and well cements
14-15
Paris (France)
TC 91
Surface active agents
15
Paris (France)
TC 17/SC 15
Steel/Railway rails, rails fasteners, wheels and wheelsets
16-22
Tokyo (Japan)
TC 69
Applications of statistical methods
18-19
Düsseldorf
(Germany)
TC 17/SC 4
Steel/Heat treatable and alloy steels
18-27
London (United
Kingdom)
JTC 1/SC 28
Information technology/Office equipment
19-22
Vienna (Austria)
REMCO
Committee on reference materials
19-22
San José (Costa
Rica)
TC 71
Concrete, reinforced concrete and pre-stressed concrete
19-22
San José (Costa
Rica)
TC 71/SC 1
Concrete, reinforced concrete and pre-stressed concrete/Test methods for concrete
19-22
San José (Costa
Rica)
TC 71/SC 4
Concrete, reinforced concrete and pre-stressed concrete/Performance requirements for
structural concrete
19-22
San José (Costa
Rica)
TC 71/SC 5
Concrete, reinforced concrete and pre-stressed concrete/Simplified design standard for concrete
structures
19-22
San José (Costa
Rica)
TC 71/SC 6
Concrete, reinforced concrete and pre-stressed concrete/Non-traditional reinforcing materials for
concrete structures
*
*
19-22
San José (Costa
Rica)
TC 71/SC 8
Concrete, reinforced concrete and pre-stressed concrete/Environmental management for
concrete and concrete structures
20
Yangzhou
(China)
TC 100
Chains and chain sprockets for power transmission and conveyors
20-21
Paris (France)
TC 17/SC 11
Steel/Steel castings
20-21
Milan (Italy)
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
21-22
Paris (France)
TC 22/SC 3
Road vehicles/Electrical and electronic equipment
22
Kruger Park
(South Africa)
TC 110/SC 4
Industrial trucks/Rough-terrain trucks
24-28
Bangkok
(Thailand)
TC 207/SC 7
Environmental management/Greenhouse gas management and related activities
24-29
Madrid (Spain)
TC 37
Terminology and other language and content resources
24-30
Bangkok
(Thailand)
TC 207
Environmental management
25-29
Brasilia (Brazil)
JTC 1/SC 34
Information technology/Document description and processing languages
25-29
Brussels
(Belgium)
TC 34/SC 9
Food products/Microbiology
25-29
Madrid (Spain)
TC 37/SC 5
Terminology and other language and content resources/Translation, interpreting and related
technology
25-29
St Paul,
Minnesota (USA)
TC 94/SC 6
Personal safety -- Protective clothing and equipment/Eye and face protection
25-29
Buffalo (USA)
TC 108
Mechanical vibration, shock and condition monitoring
25-29
Buffalo (USA)
TC 108/SC 3
Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock
measuring instruments
26
Lisbon (Portugal)
JTC 1/SC 23
Information technology/Digitally Recorded Media for Information Interchange and Storage
26-27
Düsseldorf
(Germany)
TC 17/SC 9
Steel/Tinplate and blackplate
26-27
Berlin (Germany)
TC 153/SC 2
Valves/Valve actuator attachment
26-27
Beijing (China)
TC 263
Coalbed methane (CBM)
28
Buffalo (USA)
TC 108/SC 6
Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems
28
Bangkok
(Thailand)
TC 207/SC 1
Environmental management/Environmental management systems
29
Madrid (Spain)
TC 37/SC 1
Terminology and other language and content resources/Principles and methods
29
Madrid (Spain)
TC 37/SC 2
Terminology and other language and content resources/Terminographical and lexicographical
working methods
29
Paris (France)
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
29
Madison (USA)
TC 149/SC 1
Cycles/Cycles and major sub-assemblies
29
Oranjewoud
(Netherlands)
TC 188
Small craft
TC 180/SC 4
Solar energy/Systems - Thermal performance, reliability and durability
TC 134
Fertilizers and soil conditioners
*
July 2012
6
San Francisco
(USA)
9-10
Shanghai
**
(China)
16
Golden,
Colorado (USA)
TC 44/SC 10
Welding and allied processes/Unification of requirements in the field of metal welding
18
Golden,
Colorado (USA)
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied processes
personnel
19
Berlin (Germany)
TC 261
Additive manufacturing
19-20
Golden,
Colorado (USA)
TC 44
Welding and allied processes
20
Lancaster (USA)
TC 43/SC 2
Acoustics/Building acoustics
21
Stockholm
(Sweden)
JTC 1/SC 29
Information technology/Coding of audio, picture, multimedia and hypermedia information
24-25
Beijing (China)
TC 255
Biogas
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
**
JTC 1/SC 35
Information technology/User interfaces
**
August 2012
22-24
Berlin (Germany)
24
Brussels
(Belgium)
27-31
Montreal
(Canada)
*
September 2012
3-7
La Rochelle
(France)
**
TC 163
Thermal performance and energy use in the built environment
3-7
La Rochelle
(France)
**
TC 205
Building environment design
7
Zurich
(Switzerland)
**
TC 142
Cleaning equipment for air and other gases
7-8
Moscow
(Russian
Federation)
TC 20/SC 8
Aircraft and space vehicles/Aerospace terminology
8-16
Busan (Korea,
Republic of)
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
10
Milan (Italy)
*
TC 21/SC 2
Equipment for fire protection and fire fighting/Manually transportable fire extinguishers
10-11
Geneva
(Switzerland)
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system software
interfaces
10-12
Milan (Italy)
*
TC 21/SC 5
Equipment for fire protection and fire fighting/Fixed firefighting systems using water
10-12
Shandong
(China)
*
TC 206
Fine ceramics
10-14
Nancy (France)
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration
and shock
10-14
La Plaine StDenis (France)
*
TC 153/SC 1
Valves/Design, manufacture, marking and testing
10-14
Helsinki
(Finland)
*
TC 190
Soil quality
14
Beijing (China)
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
17-18
San Diego (USA) *
TMB
Technical Management Board
17-21
Seoul (Korea,
Republic of)
TC 133
Sizing systems and designations for clothes
*
17-21
Stockholm
(Sweden)
**
TC 165
Timber structures
18-20
Berlin (Germany)
*
TC 122
Packaging
19-20
Rio de Janeiro
(Brazil)
*
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries
19-21
San Diego (USA) *
GA
General Assembly
22
San Diego (USA) *
COUNCIL
Council
23-26
Sao Paulo
(Brazil)
TC 164/SC 3
Mechanical testing of metals/Hardness testing
23-26
Vienna (Austria)
TC 215
Health informatics
24-25
Ottawa (Canada)
*
TAG 8
Building
24-25
Sao Paulo
(Brazil)
**
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
24-26
Sydney
(Australia)
*
TC 54
Essential oils
24-28
Stockholm
(Sweden)
**
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
25-26
Sao Paulo
(Brazil)
**
TC 164/SC 2
Mechanical testing of metals/Ductility testing
25-27
Sao Paulo
(Brazil)
**
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
27
Sao Paulo
(Brazil)
**
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
28
Sao Paulo
(Brazil)
**
TC 164
Mechanical testing of metals
Milan (Italy)
**
TC 21/SC 3
Equipment for fire protection and fire fighting/Fire detection and alarm systems
Milan (Italy)
**
TC 21/SC 6
Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems
using foam and powder
Milan (Italy)
**
TC 21/SC 8
Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas
Cadiz (Spain)
**
TC 213
Dimensional and geometrical product specifications and verification
TC 106
Dentistry
**
TC 184/SC 1
Automation systems and integration/Physical device control
**
September-October 2012
30-6
Paris (France)
3rd Quarter 2012
Frankfurt
(Germany)
October 2012
1-2
Ottawa (Canada)
*
TC 34/SC 11
Food products/Animal and vegetable fats and oils
3
Ottawa (Canada)
*
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
4-5
MontanaVermala
(Switzerland)
TC 226
Materials for the production of primary aluminium
5
Berlin (Germany)
*
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
6
Chicago (USA)
*
TC 130
Graphic technology
8
Berlin (Germany)
*
TC 254
Safety of amusement rides and amusement devices
8-11
Nagoya (Japan)
*
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
8-12
(USA)
**
TC 154
Processes, data elements and documents in commerce, industry and administration
9-10
Montreal
(Canada)
*
TC 199
Safety of machinery
10-11
Berlin (Germany)
*
TC 167
Steel and aluminium structures
10-12
Munich
(Germany)
*
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
11-12
Bogota
(Colombia)
*
CASCO
Committee on conformity assessment
11-12
Tokyo (Japan)
*
TC 119
Powder metallurgy
14-18
Tokyo (Japan)
**
TC 10/SC 8
Technical product documentation/Construction documentation
14-19
Tokyo (Japan)
TC 59
Buildings and civil engineering works
14-19
Praia do Forte
(Brazil)
TC 127
Earth-moving machinery
15
Sydney
(Australia)
TC 2/SC 7
Fasteners/Reference standards
15-19
Montreal
(Canada)
*
TC 6
Paper, board and pulps
15-19
Riccione (Italy)
*
TC 45
Rubber and rubber products
15-19
Riccione (Italy)
*
TC 45/SC 1
Rubber and rubber products/Hoses (rubber and plastics)
15-19
Riccione (Italy)
**
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
15-19
Amsterdam
(Netherlands)
*
TC 146
Air quality
16
Sydney
(Australia)
TC 2/SC 11
Fasteners/Fasteners with metric external thread
17
Sydney
(Australia)
TC 2/SC 14
Fasteners/Surface coatings
17
(Korea, Republic
of)
**
TC 17/SC 7
Steel/Methods of testing (other than mechanical tests and chemical analysis)
17
Berlin (Germany)
*
TC 22/SC 9
Road vehicles/Vehicle dynamics and road-holding ability
17-19
Guilin (China)
*
TC 202
Microbeam analysis
18
Sydney
(Australia)
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
18
Riccione (Italy)
*
TC 45/SC 2
Rubber and rubber products/Testing and analysis
18
Berlin (Germany)
**
TC 83
Sports and recreational equipment
18-19
(Korea, Republic
of)
**
TC 17
Steel
19
Sydney
(Australia)
TC 2
Fasteners
19
Riccione (Italy)
*
TC 45/SC 3
Rubber and rubber products/Raw materials (including latex) for use in the rubber industry
21-26
Sapporo (Japan)
*
TC 92
Fire safety
21-26
Sapporo (Japan)
*
TC 92/SC 1
Fire safety/Fire initiation and growth
21-26
Sapporo (Japan)
**
TC 92/SC 2
Fire safety/Fire containment
22-26
(Japan)
**
TC 181
Safety of toys
22-27
Jeju (Korea,
Republic of)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
23
Sydney
(Australia)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil,
waste and drainage (including land drainage)
24
Sydney
(Australia)
**
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
supplies
24
Sydney
(Australia)
**
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the
supply of gaseous fuels
25
Sydney
(Australia)
**
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for
industrial applications
25
Sydney
(Australia)
**
TC 138/SC 5
Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings
and valves of plastic materials and their accessories -- Test methods and basic specifications
25
Sydney
(Australia)
**
TC 138/SC 6
Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings
for all applications
25
Sydney
(Australia)
**
TC 138/SC 7
Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of
plastics materials
25
Elda (Alicante)
(Spain)
TC 216
Footwear
25-26
Tampa, Florida
(USA)
TC 112
Vacuum technology
25-27
Tampa, Florida
(USA)
*
TC 201
Surface chemical analysis
26
Sydney
(Australia)
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
Messina (Italy)
**
TC 8
Ships and marine technology
(USA)
**
TC 36
Cinematography
(France)
**
TC 70/SC 7
Internal combustion engines/Tests for lubricating oil filters
Yokohama
(Japan)
**
TC 119/SC 3
Powder metallurgy/Sampling and testing methods for sintered metal materials (excluding
hardmetals)
TC 34/SC 17
Food products/Management systems for food safety
*
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and
systems
October-November 2012
29-1
Saitama (Japan)
31-7
Orlando (USA)
November 2012
5
Berlin (Germany)
*
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
5-8
Warsaw (Poland)
*
TC 98
Bases for design of structures
5-10
Jeju (Korea,
Republic of)
**
JTC 1
Information technology
6-8
Tokyo (Japan)
*
TC 17/SC 1
Steel/Methods of determination of chemical composition
6-8
Reykjavik
(Iceland)
TC 234
Fisheries and aquaculture
12-16
Kyoto (Japan)
*
TC 244
Industrial furnaces and associated processing equipment
15-16
Xian (China)
*
TC 227
Springs
26-27
London (United
Kingdom)
*
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
26-30
Florianopolis
(Brazil)
*
TC 43
Acoustics
26-30
Florianopolis
(Brazil)
*
TC 43/SC 1
Acoustics/Noise
27-29
Washington, D.C
(USA)
*
TC 20
Aircraft and space vehicles
(Korea, Republic
of)
**
TC 23/SC 7
Tractors and machinery for agriculture and forestry/Equipment for harvesting and conservation
Wiesbaden
(Germany)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and completion fluids, and well cements
(USA)
**
TC 118/SC 6
Compressors and pneumatic tools, machines and equipment/Air compressors and compressed
air systems
Kyoto (Japan)
**
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
(Mexico)
**
TC 229
Nanotechnologies
*
TC 211
Geographic information/Geomatics
(United
Kingdom)
**
TC 157
Non-systemic contraceptives and STI barrier prophylactics
Gaithersburg
(USA)
**
TC 172/SC 9
Optics and photonics/Electro-optical systems
London (United
Kingdom)
*
TC 121/SC 3
Anaesthetic and respiratory equipment/Lung ventilators and related equipment
(Unknown)
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
*
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
**
JTC 1/SC 35
Information technology/User interfaces
December 2012
11-12
Riyadh (Saudi
Arabia)
4th Quarter 2012
January 2013
7-12
February 2013
4-8
London (United
Kingdom)
February-March 2013
25-1
(South America)
March 2013
19-22
Jeju (Korea,
Republic of)
*
TC 107
Metallic and other inorganic coatings
27-28
Geneva
(Switzerland)
*
COUNCIL
Council
**
TC 117
Fans
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of
machines
April 2013
10-11
Helsinki
(Finland)
22-26
Berlin (Germany)
23-24
Dresden
(Germany)
**
TC 219
Floor coverings
Paris (France)
**
TC 29/SC 5
Small tools/Grinding wheels and abrasives
Salzburg
(Austria)
**
TC 89
Wood-based panels
Shenzen (China)
**
TC 130
Graphic technology
(USA)
**
TC 178
Lifts, escalators and moving walks
May 2013
13-16
Chicago (USA)
**
TC 195
Building construction machinery and equipment
13-17
(Italy)
**
TC 29
Small tools
13-17
(Italy)
**
TC 29/SC 8
Small tools/Tools for pressing and moulding
13-17
Guangzhou
(China)
*
TC 68
Financial services
13-17
Guangzhou
(China)
*
TC 68/SC 2
Financial services/Financial Services, security
27-31
Shanghai
(China)
*
TC 4
Rolling bearings
Ottawa (Canada)
**
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
(China)
**
TC 10
Technical product documentation
Paris (France)
**
TC 46/SC 11
Information and documentation/Archives/records management
(Unknown)
**
TC 158
Analysis of gases
June 2013
5
Prague (Czech
Republic)
**
TC 115
Pumps
17-21
Shanghai
(China)
**
TC 121
Anaesthetic and respiratory equipment
Washington, D.C
(USA)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and completion fluids, and well cements
**
TC 34/SC 4
Food products/Cereals and pulses
**
JTC 1/SC 35
Information technology/User interfaces
2nd Quarter 2013
(Canada)
August 2013
26-30
(South America)
September 2013
18-20
St. Petersburg
(Russian
Federation)
*
GA
General Assembly
21
St. Petersburg
(Russian
Federation)
*
COUNCIL
Council
Paris (France)
**
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
(Unknown)
**
TC 21
Equipment for fire protection and fire fighting
Victoria
(Canada)
**
TC 33
Refractories
(Korea, Republic
of)
**
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and
testing conditions
(Korea, Republic
of)
**
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
(Korea, Republic
of)
**
TC 123/SC 5
Plain bearings/Quality analysis and assurance
(Korea, Republic
of)
**
TC 123/SC 6
Plain bearings/Terms and common items
(Korea, Republic
of)
**
TC 123/SC 7
Plain bearings/Special types of plain bearings
Tokyo (Japan)
**
TC 142
Cleaning equipment for air and other gases
October 2013
7
Istanbul (Turkey)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
7-11
Istanbul (Turkey)
**
TC 38
Textiles
8
Istanbul (Turkey)
**
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
9
Istanbul (Turkey)
**
TC 38/SC 23
Textiles/Fibres and yarns
10
Istanbul (Turkey)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
11
Garching
(Germany)
**
TC 60
Gears
11
Garching
(Germany)
**
TC 60/SC 1
Gears/Nomenclature and wormgearing
11
Garching
(Germany)
**
TC 60/SC 2
Gears/Gear capacity calculation
(France)
**
TC 111/SC 1
Round steel link chains, chain slings, components and accessories/Chains and chain slings
Mexico (Mexico)
**
TC 113
Hydrometry
Berlin (Germany)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
Beijing (China)
**
TC 184/SC 2
Automation systems and integration/Robots and robotic devices
(Japan)
**
TC 206
Fine ceramics
Okinawa (Japan)
**
TC 201
Surface chemical analysis
(France)
**
JTC 1
Information technology
**
TC 106
Dentistry
(Australia)
**
REMCO
Committee on reference materials
(South Africa)
**
TC 27
Solid mineral fuels
(South Africa)
**
TC 37
Terminology and other language and content resources
(Unknown)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
(South Africa)
**
TC 44
Welding and allied processes
Porto de
Galinhas (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
November 2013
10
4th Quarter 2013
(Korea, Republic
of)
Month unknown 2013
(Norway)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil,
waste and drainage (including land drainage)
(Brazil)
**
TC 155
Nickel and nickel alloys
(Sweden)
**
TC 163
Thermal performance and energy use in the built environment
Amsterdam
(Netherlands)
**
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
(Unknown)
**
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
(South Africa)
**
TC 202
Microbeam analysis
(Sweden)
**
TC 205
Building environment design
(Portugal)
**
TC 228
Tourism and related services
(South Africa)
**
TC 242
Energy Management
(Finland)
**
TC 257
General technical rules for determination of energy savings in renovation projects, industrial
enterprises and regions
London (United
Kingdom)
*
TC 68
Financial services
Washington, D.C
(USA)
**
TC 46/SC 11
Information and documentation/Archives/records management
**
TC 178
Lifts, escalators and moving walks
(USA)
**
REMCO
Committee on reference materials
(Brazil)
**
TC 28
Petroleum products and lubricants
Beijing (China)
**
TC 36
Cinematography
(Germany)
**
TC 37
Terminology and other language and content resources
(Japan)
**
TC 44
Welding and allied processes
(USA)
**
TC 142
Cleaning equipment for air and other gases
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
(South Africa)
**
REMCO
Committee on reference materials
(Finland)
**
TC 44
Welding and allied processes
London (United
Kingdom)
**
TC 142
Cleaning equipment for air and other gases
(China)
**
TC 155
Nickel and nickel alloys
**
TC 44
Welding and allied processes
May 2014
15
September 2014
(South Africa)
Month unknown 2014
2nd Quarter 2015
(China)
Month unknown 2015
Month unknown 2016
(Australia)