May 2013
Highland “Spray-Safe” HiTemp
Dry-Fall Coatings
If you are concerned about paint overspray damaging nearby businesses or
traffic, you need Highland Dry-Fall. Without sacrifice to durability or aesthetics,
you can safely use spray application and
eliminate paint overspray damage. Overspray is powder-dry within 10-20 feet from
point of application and wipes off cleanly
without chemicals or buffing.
Did you know
that even if
you opt to paint your facility by
the labor intensive brush and roll
method, you may still have
“Overspray” damages. When
painting lofty structures, paint
droplets may travel several
miles when airborne and cause
as much or more damage than
overspray from spray application!
HOW TO
SAVE $5,000
Eliminate the risk with
Highland “Spray-Safe”
Dry-Fall Coatings
It is up to 4 times faster to apply than
brush and roll saving time and reducing
plant down time. These solvent-borne
coatings will last 3-4 times longer than
conventional alkyd and water-borne dryfall coatings.
To see the “Spray-Safe System” Coating System Guide for HMA Plants in
Congested Areas, please Click Here.
What is the REAL
cost of your coating?
What is the REAL cost of your coating?Highland
Lower cost
per gallon HiTemp
“Spray-Safe”
does not always mean a lower price per square foot! Higher
Dry-Fall
Coatings
Volume Solids equals more square foot coverage
per gallon!
To cover 50,000 square feet you would spend
$26,000 ($75 per gallon) for Product “A”
and only $21,000 ($90 per gallon) for product “B”!
Product A
$75.00
40%
1604 sq. ft.
10%
4 mils
Coating Cost per Gallon:
Volume Solids of the Coating
Theoretical Coverage per Gallon
Loss per Sprayable Gallon
Recommended DFT
1604 sq ft per gallon x Volume Solids
÷ 4 mils DFT
Less 10% Loss per Sprayable Gallon
Cost per Square Foot
Cost for Coating 50,000 square feet
Product B
$90.00
60%
1604 sq. ft.
10%
4 mils
642 sq ft
962 sq ft
160 sq ft
240 sq ft that even
facility by
144 sqyou
ft opt to paint
216 sqyour
ft
0.52
0.42
the labor intensive
brush and ro
$ 26,000.00
21,000.00
method, $ you
may still have
Did you know
“Overspray” damages. When
painting lofty structures, pain
How to Calculate Your Cost per Square Foot droplets may travel severa
miles when
and cause
We all want the most value we can get for our hard earned dollar. When evaluating
paint airborne
it
as much or more damage than
is good to know not only the price per gallon but also just how far that gallon will
go. You from
will spray applica
overspray
find that the least expensive price per gallon is not always the best value in the
long-run.
tion!
First, look at the pail or ask the sales rep for the percent of Volume Solids
Eliminate the risk with
of the coating and the recommended DFT (Dry Film Thickness). Using this
Highland “Spray-Safe”
information you can determine the cost of the paint per square foot.
• Use 1604 square feet as your Theoretical Coverage rate
and multiply by the percent of Volume Solids
Dry-Fall Coatings
• Reduce that number by 10% to cover the loss per sprayable gallon
• Divide that number by the number of recommended DFT
• Divide that number into the price per gallon to get the cost per square foot
If you would like to receive one of our free HMA industry color cards click the following link: Click Here