AUTOMATIC RECIPROCATING VALVES PRESSURE SHIFTING D03 & D05 This valve type is characterized by fully hydraulic operation, as it takes advantage of the system pressure rise to cause an automatic and continuous inversion of the utilization. The changeover takes place when the system pressure exceeds the inversion valves calibration pressure, and therefore also in not predetermined positions. At cylinder stroke end, the overall maximum pressure valve should be adjusted on a value 30% higher than the system operating pressure. The inverter valves pressure calibration values should be 15% lower than that of the overall maximum pressure valve, and 15% higher than the maximum operating pressure. Note: to operate the push button emergency, a minimum pressure of 3 bar on the actuator is needed. D03-RCP-4K B P T A D05-RCP-4K NFPA Size Model Pressure Shifting Range 290-2000 psi 725- 4000 psi 290-2000 psi 725- 4000 psi D03-RCP-2K D03-RCP-4K D05-RCP-2K D05-RCP-4K D03 D05 Min. Flow gpm/ (lpm) Max. Flow gpm/ (lpm) Weight lb/ (kg) 0.5 (2.0) 6.6 (25) 5.0 (2.3) 1.6 (6.0) 18.5 (70) 11.9 (5.4) Min. Pressure Max. Pressure 290 psi (20 bar) 4000 psi (275bar) Operating Notes: Fluid viscosity: 80-300 SUS (17-65cSt) o o o Fluid temperature: 40-160F (5 -70 C) Max. contamination level: 25 micron (class 8 NAS 1638) D03 Pressure Drops D05 Pressure Drops (psi)(Mpa) 87 0.6 A T B T 145 1.0 73 0.5 116 0.8 58 0.4 87 0.6 P P 58 0.4 A B 29 0.2 0 ΔP (psi) ΔP (psi) (psi)(Mpa) 174 1.2 P P A B A T B T 44 0.3 29 0.2 15 0.1 0 0 0 1.3 5 2.6 10 4.0 15 Q (gpm) 5.3 20 6.6 (gpm) 25 (l/min) 0 0 0 0 4 15 8 30 Q (gpm) 12 45 16 60 18.5 (gpm) 70 (l/min) AUTOMATIC RECIPROCATING VALVES DIMENSIONAL INFORMATION D03 & D05 D03-RCP 9.5 (0.37) 91 (3.60) 5.5 (0.22) 32 (1.26) Manual Override Each End 70 (2.74) 42 (1.65) 42 (1.65) B B P 46 (1.81) A 32.5 (1.28) T A 17.5 (0.69) Units: Inches D03 Pattern 40.5 (1.594) Mounting Torque: 40 in-lbs (4) 10-24 SHCS x 1.75” long supplied D05-RCP 10.4 (0.41) 112 (4.41) 6.6 (0.26) Manual Override Each End 30 (1.18) A B P T T 42 (1.65) 95.5 (3.76) 42 (1.65) 204 (8.03) 54 (2.13) Units: Inches 39.6 (1.56) B T 20.5 (0.81) 47.5 (1.87) 24.4 (0.96) A T B D05 Pattern Mounting Torque: 80 in-lbs (4) 1/4-20 SHCS x 1.50” long supplied 46 (1.81) P A 13.5 (0.53) 69 (2.72) 31 (1.22) 21 (0.82) 178 (7.0)