CTI Construction Material Testing Services
SOILS AND AGGREGATE
Standard Practice for Agencies Testing Soil and Rock
Moisture Content of Soil
Moisture Content of Soil - Rapid Method
Unconfined Compression
Sieve Analysis
Amount Finer than #200 Sieve
Hydrometer Analysis
Atterberg Limits
Soil Classification and Reporting
Deleterious Particles
Clay Lumps and Friable Particles
Organic Impurities
Lightweight Pieces in Aggregate
Flat and Elongated Particles
Fractured Particles in Coarse Aggregate
Organic Content by Loss on Ignition
Abrasion-Los Angeles - coarse or fine
Soundness-5 cycles
Specific Gravity and Absorption
Bulk Density (Unit Weight) and Voids in Aggregates
Standard Proctor Compaction Test
Modified Proctor Compaction Test
Sand Cone In-Place Density of Soils
Unconsolidated-Undrained Triaxial Compression Test
Consolidated Undrained Triaxial Compression Test
One-Dimensional Consolidation
One-Dimensional Swell or Collapse of Cohesive Soil
Permeability of Granular Soils -Constant Head
Hydraulic Conductivity of Porous Material
Rigid-Wall Permeameter
Flexible Wall Permeameter
California Bearing Ratio of Laboratory Compacted Soils
Soil Survey Tests on Laboratory Samples
Specific Gravity
Earth Resistivity (soil box)
Earth Resistivity in Field
pH Determination
Nuclear Density and Moisture Gauge for Soil
Standard
ASTM D 3740
ASTM D 2216 / C 566
ASTM D4944
ASTM D 2166
ASTM C 136
ASTM D 1140 / C 117
ASTM D 422
ASTM D 4318
ASTM D 2487 or
D 2488
ASTM C 142
ASTM C 40
ASTM C 123
ASTM D 4791
ASTM D 5821
ASTM D 2974
ASTM C 535 / C 131
ASTM C 88
ASTM C 127 or C 128
ASTM C 29
ASTM D 698
ASTM D 1557
ASTM D 1556
ASTM D 2850
ASTM D 4767
ASTM D 2435
ASTM D 4546
ASTM D 2434
ASTM D 5856
ASTM D 5084
ASTM D 1883
ASTM D 854
ASTM G 187
ASTM G 57
ASTM D 4972
ASTM D 6938
CTI Construction Material Testing Services
Standard
ASPHALT
Standard Specification for Agencies Testing and Inspecting Road and
ASTM D 3666
Paving Materials
Asphalt Content of Hot Mix Asphalt (HMA) by Ignition Method
ASTM D 6307
Quantitative Extraction of Asphalt Binder from HMA
ASTM D 2172
Bulk Specific Gravity of Compacted HMA
ASTM D 2726
Mechanical Analysis of Extracted Aggregate
ASTM D 5444
Marshall Method Preparation
ASTM D 6926
Marshall Method - Flow and Stability
ASTM D 6927
Recovery by Abson Method
ASTM D 1856
Penetration of Asphalt Cement
ASTM D 5
Percent Air Voids in Bituminous Paving Mixtures
ASTM D 3203
Maximum Specific Gravity of HMA Paving Mixtures
ASTM D 2041
Density on Asphalt Cores (set of 3)
Marshall Mix Design (to determine asphalt content)
In-Density of Bituminous Concrete by Nuclear Method
ASTM D 2950
Marshall Mix for DOT Submittals
CONCRETE
Standard Practice for Laboratories Testing Concrete and Concrete
ASTM C 1077
Aggregates
Slump of Concrete
ASTM C 143
Unit Weight of Concrete
ASTM C 138
Temperature of Freshly Mixed Concrete
ASTM C 1064
Air Content of Freshly Mixed Concrete - Volumetric Method
ASTM C 173
Air Content of Freshly Mixed Concrete - Pressure Method
ASTM C 231
Molding and Curing Concrete Test Specimens
ASTM C 192 / C 511
Compressive Strength Testing for
Concrete Cylinders
ASTM C 39
Cores
ASTM C 42
Masonry Mortar
ASTM C 109
Masonry Grout
ASTM C 1019
Flexural Strength Testing for Concrete Beam
ASTM C 78 / C 293
Thickness of Concrete Elements Using Drilled Cores
ASTM C 174
Alkali Reactivity of Aggregates
ASTM C 1260
Alkali Reactivity of Combinations of Cementitious Materials
ASTM C 1567
Concrete Mix Design
Concrete Floor Flatness and Floor Levelness Numbers
ASTM E 1155
MASONRY UNITS
Compressive Strength Testing of CMU Block
ASTM C 1314
Absorption, Unit Weight, and Moisture
ASTM C 140
SPRAYED FIRE-RESISTIVE MATERIAL (SFRM)
Thickness and Density of SFRM Applied to Structural Members
ASTM E 605
Cohesion/Adhesion of SFRM Applied to Structural Members
ASTM E 736