MULTI-WAVES-16
Managed Last mile Access Rack
MULTI WAVES-16
MULTI-WAVES-16 is a Manageable Last Mile Access system, providing full convergence of the Last Mile services with different technologies, rates,
interfaces and media. The Managed rack supports E1, G.SHDSL, Optical multiplexing and Ethernet cards. Each card in the MULTI-WAVES-16 works in a pointto-point configuration opposite to a remote CPE with no connection to the adjacent cards. This allows each card to support a different rates, interfaces or
media. All cards are hot-swappable and can be replaced without interfering with other cards.
MULTI-WAVES-16 is a 19" rack-mountable 3U platform supporting two rear-loading, redundant, load-sharing, hot-swappable AC or DC power
supplies. A maximum of 15 modules can be installed in the chassis, providing a CO/POP site solution for connecting maximum of 15 remote customers.
MULTI-WAVES-16 supports SNMP management with Network Management (Master) card. The network management software LITEVIEW
NMS enables the user to change the setup configuration, get real-time alerts on system status, active diagnostics, and receive statistics on system functionality in
a graphical format.
Key Features
Supports up to 15 user slots
Dual redundant and load-sharing AC or DC power supply
modules
Single chassis for different types of modules supporting a variety of
l
technologies, rates, interfaces and media
Hot-swappable power supply modules
l
l
l
Management
Powerful SNMP management system, providing configuration,
diagnostics & monitoring
Provides centralized control of MULTI-WAVES-16 and
l
remote CPEs in the network, including interface configuration,
connection setup, alarm and monitoring
Direct 10/100BaseT Ethernet connection enables real-time
l
management of central and remote sites
l
Local management via console
Cascade management of up to four MULTI-WAVES-16 chassis
l
with single IP address
l
RackSpecifications
Features
Rack
Port specification (Network Management module)
Console
: RJ45
ETH (for SNMP and Telnet) : RJ45
Power consumption
: < 80W (at max load)
l
l
Environment of operation :
Operating temperature
: 0 ~ 50 degree Centigrade
Humidity
: 5 ~ 90% non-condensing
Storage temperature
: -40 ~ 85 degree Centigrade
Humidity
: 20 ~ 90% non-condensing
MULTI-WAVES-16 modular chassis
Height
: 3U
Number of slots
: 15
Power supply
: Two hot-swappable AC or DC
Input power supply voltage : AC : 185V ~ 256V, 50/60Hz
DC : -36V ~ -72V
Short circuit protection
: Yes
Rated current
: 20A
Over current protection
: 30A
Noise
: < 100mV p-p
l
LED Indicators :
Power Supply (Green)
: PWR
Modules for PS1 (Red)
: PS1-5
First Fan for PS1 (Red)
: PS1-12
Modules for PS2 (Red)
: PS2-5
Second Fan for PS2 (Red)
: PS2-12
l
l
Dimensions (W x H x D)
Weight
l
l
: 442 x 130.5 x 350 mm
: < 7 Kg (with dual power supply)
Features of NMS module
Application
SDH
PSN
E1’s
LITEVIEW
ETH
MULTI-WAVES-16
-
V35
FIBER
V35
2W
SHDSL
ECAT-04
-
4 E1’s
WITE LITE
ETH
2W
SHDSL
2W
SHDSL
E1
WITE LITE
V35
4W
SHDSL
WITE LITE
ETH
WITE LITE
ETH
ETH
Ordering MULTI-WAVES-16
MULTI-WAVES-16/AC/R
3U high Last Mile Multi-Service Access rack with dual redundanct 230V AC
Power supply modules
MULTI-WAVES-16/DC/R
3U high Last Mile Multi-Service Access rack with dual redundanct -48V DC
Power supply modules
MULTI-WAVES-CM-M
Master Network Management Module for MULTIWAVES-16
MULTI-WAVES-CM-S
Slave Network Management Module for MULTIWAVES-16
MULTI-WAVES/M/SHDSL/E1/2W
2-wire G.SHDSL Module with one 120Ohms E1 port (RJ45) and one
G.SHDSL port (RJ45)
MULTI-WAVES/M/SHDSL/V35/2W
2-wire G.SHDSL Module with one V.35 port and one G.SHDSL port (RJ45)
MULTI-WAVES/M/SHDSL/FE/2W
2-wire G.SHDSL Module with one 10/100Base-T Ethernet port (RJ45) and
one G.SHDSL port (RJ45)
MULTI-WAVES/M/SHDSL/FE/4W
4-wire G.SHDSL Module with one 10/100Base-T Ethernet port (RJ45) and
one G.SHDSL port (RJ45)
MULTI-WAVES/M/E1/V35
V.35 to transparent/fractional E1 Interface Converter Module
MULTI-WAVES/M/E1/FE
Fast Ethernet to transparent/fractional E1 Interface Converter Module
MULTI-WAVES/M/OP/4E1/4FE
Optical Multiplexer Module with four E1 interfaces (120Ohms Balanced,
RJ45 connector) and one 10/100Base-T Ethernet port (RJ45)
MRO-TEK Limited
Bellary Road, Hebbal
Bangalore - 560 024, INDIA
Phone : +91-80-23332951
Fax : +91-80-23333415
Email : mrotek@vsnl.com
Web: www.mro-tek.com
TM
Copyright MRO-TEK Limited - 2012
is registered for Trade Marks with appropriate authorities.
Specifications are subject to change without notice. E & OE.
V12_05