CURRICULUM VITAE
ASSOC. PROF. DR. DZULKIFLI BIN AWANG
DEPARTMENT OF TECHNICAL & ENGINEERING EDUCATION
FACULTY OF EDUCATION
UNIVERSITI TEKNOLOGI MALAYSIA
KAMPUS SKUDAI
81310 SKUDAI
NEGERI JOHOR DARUL TAKZIM
TEL: 07- 5534367 (direct line)(h/p: 019-7502196)
FAX: 07- 5534884
E/MAIL:dzul@fkm.utm.my or dzul@utm.my
CONTENTS
1. Personal Data
2. Education and Degrees
3. Employment Experiences
4. Members of Societies
5. Managerial Post/ Additional Responsibilities
6. Committees
7. Teaching Responsibilities
8. Supervision of Thesis
9. Supervision of Students Activities
10. Assessment Role
11. Seminar and Courses Attended
12. Project and Research
13. Consultancy
14. Publications
15. Extra-curricular Activities
16. Honours and Awards
PAGE
2
2
2
3
4
8
13
19
32
34
40
54
57
58
62
73
1
1. PERSONAL DATA
Name:
I/C Number:
Nationality:
Associate Prof. Dr. Dzulkilfi bin Awang
570504-08-6675
Malaysian
Date of Birth:
Place of Birth:
Marital Status:
House Address:
4th May 1957
Kuala Kurau, Perak
Married
29, Jalan Belibis 1. Taman Perling, 81200 Johor Bahru, JOHOR
2. EDUCATION AND DEGREES
Higher School Certificate (HSC - full Cert.), Kind Edward VII Secondary School,
Taiping, Perak (1978)
Bachelor of Design in Art & Design (Industrial Design) MARA Institute of Technology
(1983) Dissertation: Design & Safety of Children‟s Toys
Master of Arts (with Distinction) in Industrial Design (Engineering), Manchester
Polytechnic, Manchester, United Kingdom (1985) Thesis: A Mechanized Sprayer for
Tobacco Cultivation in Malaysia
Doctor of Philosophy in Industrial Design, The Manchester Metropolitan University,
Manchester, United Kingdom (1995) Thesis: The Potential Contribution of Industrial
Design to the Adaptation of Agricultural Machinery for use in Malaysia
3. EMPLOYMENT EXPERIENCES
Post:
Employer:
Date:
Temporary Teacher (academic)
Sekolah Menengah Agama Al-Falah, Parit Tok Ngah, Tanjung Piandang,
Perak.
June 1978 – June 1979
Post:
Employer:
Date:
Design Trainee
Matshusita Electric Company, Shah Alam, Selangor
May- July 1982
2
Post:
Employer:
Date:
Assistant Lecturer
Faculty of Mechanical Engineering, UTM
August 1983 – September 1985
Post:
Employer:
Date:
Part Time Lecturer
MARA Institute of Technology, Shah Alam
July 1987 –June 1989
Post:
Employer:
Date:
Lecturer
Faculty of Mechanical Engineering, UTM
October 1985 – April 1995
Post:
Employer:
Date:
Senior Lecturer
Faculty of Mechanical Engineering, UTM
May 1995 – March 1999
Post:
Employer:
Date:
Associate Professor
Faculty of Mechanical Engineering, UTM
April 1999 – Present
Post:
Employer:
Date:
Head of Design Department
Faculty of Mechanical Engineering, UTM
January 2001-March 2007
Post:
Employer:
Date:
Head of Industrial Design Panel
Faculty of Mechanical Engineering, UTM
March 2007- 2009
Post:
Employer:
Date:
Associate Professor
Faculty of Education, UTM
August 2010 - Present
4. MEMBERS OF SOCIETIES
A. PROFESSIONAL
Malaysian Invention and Design Society (MINDS) - Member
South East Asean Ergonomics Society (SEAES) - Member
Society of Industrial Art & Design (SIAD), United Kingdom - Member
3
Malaysia Design Society (Majlis Rekabentuk Malaysia) - Member
B. NON-PROFESSIONAL
Methodist Secondary School Ex-Student Association - Member
Universiti Teknologi MARA Alumni - Member
Universiti Teknologi Malaysia Academic Staff Association – Member
Malaysian Banjar Association – Live member.
5. MANAGERIAL POST/ADDITIONAL RESPONSIBILITIES
5.1 Managerial
a) Post
Date
: Head of Design Panel
: July 1987 – Jun 1988
b) Post
Date
: Co-ordinator for industrial Design (SJJ 3512) subject
: July 1990 May 1991
c) Post
Date
: Co-ordinator for Product Design (SMM 5523) Subject
: July 1996 – May 1997
d) Post
Date
: Co-ordinator for Industrial Design Subject (SMJ 2513) subject
: July 1996 – May 2001
e) Post
: Committee for the establishment of New Course – Bachelor of Science
Industrial Design
: May 1995 – April 1997
Date
f) Post
Date
: Committee for the establishment of New Course – Automotive
Engineering
: July 1996 – May 1997
g) Post
Date
: Co-ordinator for Bachelor of Science - Industrial Design Course.
: May 1997 – Present
h) Post
Date
: Co-ordinator for Industrial Design subjects (SMJ 2513)
: May 1998 – Present
4
i) Post
Date
: Project Leader – Design and Fabrication of a Super-kart F1 Group
: August 1996 – August 1998
j) Post
Date
: Project Leader - Design and Fabrication of a Mobile Field Kitchen
: March 1998 – March 1999
k) Post
Date
: Project Leader – Design and Fabrication of a Catamaran Sailing Boat
: March 1998 – March 1998
l) Post
Date
: Head of Industrial Design Area/Specialisation
: Jan 1999 – Jan 2001
m)Post
Date
: Acting Head of Department, Dept. of Design, FME
: 6th – 7th May 1999
n) Post
Date
: Acting Head of Department, Dept. of Design, FME
: 16th – 18th June 1999
o) Post
Date
: Acting Head of Department, Dept. of Design, FME
: 23rd – 28th August 1999
p) Post
Date
: Acting Head of Department, Dept. of Design, FME
: 22nd May – 10th June 2000
q) Post
Date
: Acting Head of Department, Dept. of Design, FME
: 6th - 10th November 2000
r) Post
Date
: Acting Head of Department, Dept. of Design, FME
: 28th - 29th November 2000
s) Post
Date
: Head of Department, Dept. of Design, FME
: 1st January 2001 - 31 March 2007
t) Post
Date
: Head of Industrial Design Panel
: 1 April 2007 – July 2010
5.2 Advisor of Studies
a) Post
Date
: Advisor of Studies 1st Year Diploma of Mechanical Engineering
: 1983 – 1984
b) Post
Date
: Advisor of Studies 1st Year Diploma of mechanical Engineering
: 1986 – 1987
5
c) Post
Date
: Advisor of Studies 2nd Year Diploma of Mechanical Engineering
: 1987 – 1988
d) Post
Date
: Advisor of Studies 3rd Year Diploma of Mechanical Engineering
: 1986 – 1987
e) Post
Date
: Advisor of Studies 1st Degree of Mechanical Engineering
: 1987 – 1988
f) Post
Date
: Advisor of Studies 2nd Year Degree of Mechanical Engineering
: 1988 - 1989
g) Post
Date
: Advisor of Studies 3rd Year Degree of Mechanical Engineering
: 1989 – 1990
h) Post
Date
: Advisor of Studies 4th Year Degree of Mechanical Engineering
: 1990 – 1991
i) Post
Date
: Advisor of Studies 2nd Year Degree of Mechanical Engineering
: 1995 - 1996
j) Post
Date
: Advisor of Studies 3rd Year Degree of Mechanical Engineering
: 1997 - 1998
k) Post
Date
: Advisor of Studies 4th Year Degree of Mechanical Engineering
: 1998 – 1999
l) Post
Date
: Advisor of Studies 5th Year Degree of Mechanical Engineering
: 1999 – Present
m) Post
: Advisor of Studies 1st year Degree of Bachelor of Science
Industrial Design
: 1999/2000
Date
o) Post
Date
p) Post
Date
q) Post
Date
: Advisor of Studies 2nd year Degree of Bachelor of Science Industrial
Design
: 2000/2001
: Advisor of Studies 3rd year Degree of Bachelor of Science Industrial
Design
: 2001/2002
: Advisor of Studies 4th year Degree of Bachelor of Science Industrial
Design
: 2002/2003/2004/2005
6
r) Post
Date
s) Post
Date
t) Post
Date
u) Post
Date
: Advisor of Studies 1st year Degree of Bachelor of Science
Industrial Design
: 2005/2006
: Advisor of Studies 2nd year Degree of Bachelor of Science
Industrial Design
: 2006/2007
: Advisor of Studies 3rd year Degree of Bachelor of Science
Industrial Design
: 2007/2008
: Advisor of Studies 4th year Degree of Bachelor of Science
Industrial Design
: 2008/2009
Advisory Outside UTM
a) Post
Date
b) Post
Date
c) Post
Date
d) Post
Date
e) Post
Date
f) Post
Date
g) Post
: Design Project Advisor 3rd Year Diploma in Art & Design, Faculty of
Art & Design, Universiti Teknologi MARA, Shah Alam (Industrial
Design)
: 1987 – 1989
: Program Advisor for Diploma Industrial Design - Kolej Agama Sultan
Zainal Abidin (KUSZA), Kuala Terengganu, Terengganu.
: 1999 – 2003
: External Panel Advisor Bachelor of Education (Computer Aided Design
Technology) Universiti Pendidikan Sultan Idris (UPSI)
: 2003 – 2004
: Program Advisor for Bachelor of Arts Industrial Design – Universiti
Sultan Zainal Abidin (UNISZA), Kuala Terengganu, Terengganu.
: 2004 - Present
: Program Advisor for Diploma Industrial Design – Southern College,
Johor Bahru, Johor
: 2006 – 2011
: Program Advisor for Bachelor of Engineering Technology (Industrial
Design) – University of Kuala Lumpur (UniKL),
: 2007 - Present
: Program Advisor for Diploma Industrial Design – Southern
7
Date
College University, Johor Bahru, Johor
: 2012 - Present
6. COMMITTEES
1) Committee : Chairman, Faculty of Mechanical Engineering Manual, UTM
Date
: 1987 – 1991
2) Committee : Thesis Panel, FME, UTM
Date
: 1989 – 1991
3) Committee : FME/UTM Open Day
Date
: 1987 – 1991
4) Committee : Out-campus Course SPACE – Co-ordinator for Industrial Design
Subject, UTM
Date
: 1995 – Present
5) Committee : FME, UTM Family Day
Date
: 1995
6) Committee : Co-ordinator, Rakan Rekacipta Workshop in conjunction with the
Launching of Rakan Muda/Rakan Rekacipta Johor State Level at UTM.
Date
: 1996
7) Committee : Sub-committee for co-ordinating Advanced Education in Mechanical
Engineering, FME, UTM
Date
: (1996 – 1997)
8) Committee : In-house Project Exco, Automotive & Aeronautical Research Group,
UTM
Date
: (1995 – 1996)
9) Committee : Establishment of New Course – Bachelor of Science Industrial Design
in UTM
Date
: (1995 – 1996)
10) Committee: Co-curriculum UTM – Faculty‟s Representative
Date
: 1996 – Present
11) Committee: Establishment of New Course – Specialization in Automotive
Technology,
8
Date
UTM
: 1997
12) Committee: Facilitator - Skim Latihan Akademik Bumiputra (SLAB) /UTM Course
Date
: 1997
13) Committee: UTM Shooting Competition in Conjunction with UTM‟s 25th
celebration.
Date
: 1997
14) Committee: Facilitator – Seminar & Workshop on Rakan Muda, Johor at
UTM.
Date
: 1997
15) Committee: Vehicle Relocation FME, UTM
Date
: (Appointment 1998 – 2000)
16) Committee: Member - Manufacturing Focus Group
Date
: 1998 – present
17) Committee: Academic Board FME, UTM
Date
: (Appointment Jan 1999 – present)
18) Committee: Colloquium Committee – Mech. Eng Faculty
Date
: (Appointment 1st May 2000 - 1st May 2002)
19) Committee: Academic Coordinator FME, UTM
Date
: (Appointment 23rd May 2000 - present)
20) Committee: Design Seminar Committee Member (Paper review Committee)
Date
: (Appointment Jan 2000- Jan 2001)
21) Committee: Member - Faculty of Mechanical Engineering Welfare Board
Date
: (Joint from Jan 2000)
22) Committee: Sultanah Zanariah Library's Customer Focus Group
Date
: (Appointment September 2000)
23) Committee: Industrial Training Committee, FME
Date
: (Appointment January 2000 – December 2003)
23) Committee: Committee Member - Post Graduate Study
Date
: (Appointment January 2001 – December 2002)
24) Committee: Committee Member – FME Human Resources Development
Date
: (Appointment January 2001 – December 2002)
9
25) Committee: Administration Committee, FME.
Date
: (Appointment January 2001- January 2007)
26) Committee : Research Coordinating Committee, FME
Date
: (Appointed January 2002)
27) Committee: Relocation Committee, FME
Date
: (Appointed August 2002)
28) Committee: ISO 9000 (2000) Implementation Committee, FME
Date
: (Appointed October 2002 – May 2003)
29) Committee: ISO 9000 (2000) Implementation Committee, FME
Date
: (Appointed May 2003 – April 2005)
30) Committee: Quality Assurance Implementation Committee, FME
Date
: (Appointed June 2003 – May 2005)
31) Committee: Teaching & Learning Assessment Reviewing Committee, UTM
Date
: (Appointed March 2008 – December 2008)
32) Committee : Post-Graduate Studies Committee, FME
Date
: (1st April 2009 - 31st March 2011)
Committees Outside UTM
1) Committee : Industrial Design Glossaries, Dewan Bahasa & Pustaka, Kuala Lumpur
Date
: (1989-1991)
2) Committee : Cultural & Arts Informations Network System (CAINS), ITM, Shah
Alam
Date
: 1997 – Present
3) Committee : Questions Drafter – Machine Drawing for HSC, Examination , Malaysia
Examination Council, Ministry of Education
Date
: 1989
4) Committee : Malaysian Community of Cheetham Hill (MCCH), Cheetham Hill,
Manchester
Date
: (1993-1994)
5) Committee : Technical Committee for Surau Building, Surau Jalan Belibis-Undan,
Taman Perling, Johor bahru.
10
Date
: (June 1999-July 2005)
6) Committee : Parents and Teachers Association, Seri Perling Secondary School.
Date
: (April 1999 - April 2000)
7) Committee : Committee for Surau Building, Seri Perling Secondary School.
Date
: (June 1999)
8) Committee : Exhibition Sub-Committee for Science & Technology Week JOHOR.
Date
: (July-Sept 1999)
9) Committee : Secretariat Rakan Muda/ Rakan Rakan Reka Cipta JOHOR
Date
: (March-Dec 1999)
10) Committee: Parents and Teachers Association, Seri Perling Secondary School.
Date
: (April 2000 - April 2001)
11) Committee: Parents and Teachers Association, Taman Perling Primary School.
Date
: (May 2000 - April 2001)
12) Committee: Curriculum Advisory Committee for Kolej Ugama Sultan Zainal Abidin
(KUSZA), Kuala Terengganu, Terengganu.
Date
: (1999 – present)
13) Committee: Judging Panel for Malaysia Good Design Mark, Malaysia Design
Council, Ministry of Science and Environment.
Date
: (1999, 2000, 2001, 2002, 2003)
14) Committee: Life Member - Malaysia Banjar Organisation
Date
: (from Dec 1999 - present)
15) Committee: Ad-hoc Committee for JPA Diploma in Industrial Design‟s Recognition,
Johor Bahru Polytechnic,
Date
: (August 2001)
16) Committee: Parents and Teachers Association, Seri Perling Secondary School.
Date
: (April 2002 - April 2003)
17) Committee: Parents and Teachers Association, Taman Perling Primary School.
Date
: (May 2002 - April 2003)
18) Committee: Ad-hoc Committee for JPA‟s Bachelor Degree in Industrial Design‟s
Recognition, Universiti Putra Malaysia, Serdang, Selangor
Date
: (September 2002)
19) Committee: Chairman – Ministry of Education Text Book Quality Control
11
Date
Committee
: (April 2002 – May 2003)
20) Committee: Board of Accreditation Malaysia
Date
: (Appointed May 2003 until now)
21) Committee: Chairman - Parents and Teachers Association, Seri Perling Secondary
School.
Date
: (May 2003 - June 2004)
22) Committee: Academic Bureau - Parents and Teachers Association, Taman
Perling Primary School.
Date
: (June 2003 - May 2004)
23) Committee: Chairman - Parents and Teachers Association, Seri Perling Secondary
School.
Date
: (June 2004 - May 2005)
24) Committee: Board Member –Programme Evaluation for Degree in Industrial Design
Kolej Ugama Sultan Zainal Abidin, Kuala Terengganu.
Date
: 18th July 2004 (appointed)
25) Committee: Vice-Chairman - Parents and Teachers Association, Seri Perling
Secondary School.
Date
: (June 2005 - May 2006)
26) Committee: Motivation Bureau - Parents and Teachers Association, Taman
Perling Primary School.
Date
: (June 2005 - May 2006)
27) Committee : Surau Al-Khautsar Management Committee, Taman perling, Johor
Bahru, Johor.
Date
: (August 2005-July 2007)
28) Committee : Advisory Committee Rakan Muda - Rakan Reka Cipta, Student Affairs,
UTM
Date
: (August 2005 – July 2007)
28) Committee: Curriculum Advisory Committee for Industrial Design Degree Course,
Universiti Putra Malaysia, Serdang, Selangor.
Date
: (September 2005 – present)
29) Committee: Curriculum Advisory Committee for Industrial Design Degree Course,
Universiti Darul Iman Malaysia, Terengganu.
Date
: (January 2006 – present)
12
30) Committee: Curriculum Advisory Committee for Industrial Design Degree Course,
Universiti Kuala Lumpur (UniKL), Federal Territory.
Date
: (March 2006 – present)
31) Committee : Curriculum Evaluation Committee for Diploma Industrial Design
Programme, Southern College, Johor Bahru, Johor.
Date
: (December 2008 - present)
32) Committee: Students‟ Integration for Unity, Secondary School Cluster (Perling Johor
Bahru Zone, JOHOR)
Date
: (January 2011- December 2012)
Committee
Date
Committee
Date
Committee
Date
Committee
Date
Committee
Date
: Evaluation & Examination Committee, Department of Technical &
Engineering Education Faculty of Education, UTM.
: (January 2012 – present)
: Chairman – Consultation Committee, Department of Technical &
Engineering Education Faculty of Education, UTM.
: (January 2012 - present)
: Head – Invention Studio laboratory, Department of Technical &
Engineering Education Faculty of Education, UTM.
: (January 2012 - present)
: External Relation, Industry & Society Committee, Department of
Technical & Engineering Education Faculty of Education, UTM.
: (January 2012 - present)
: Task Force UTM Brand Pedagogy, Faculty of Education, UTM
: (January 2012 – present)
7. TEACHING RESPONSIBILITIES
Course Name - Industrial Design
Programme : 1st Year, 2nd Year and 3rd Year B.Sc Mechanical Engineering
Year
: 1983, 1984, 1986, 1987, 1988, 1989
Content
: Introduction to Industrial Design, Definition, Design Process, Concept
Generation, Sketches, Engineering Drawing, Model Making, Experimental
Construction, Project Presentation.
Course Name - Design I
Programme : 2nd Year B.Sc Mechanical Engineering
Year
: 1995, 1996, 1997
13
Content
: Introduction to Industrial Design, Definition, Design Process, Product
Planning, Market Survey, Concept Generations, Sketches, QFD,
Ergonomics, Engineering Drawing, Production Techniques, Project
Presentation.
Course Name - Design II
Programme : 3rd Year B.Sc Mechanical Engineering
Year
: 1995, 1996, 1997, 1998
Content
: Product Planning, Market Survey, Concept Generations, Sketches, QFD,
Concurrent Design, Ergonomics, Production Techniques, Product Costing,
Engineering Drawing, Project Presentation.
Course Name - Introduction To Design
Programme : 2nd Year B.Sc Mechanical Engineering (4 years course)
Year
: 1996, 1997, 1998
Content
: Introduction to Industrial Design, Definition, Design Process, Product
Planning, Market Survey, Concept Generations, Sketches, QFD,
Ergonomics, Engineering Drawing, Production Techniques, Project
Presentation.
Course Name - Engineering Drawing
Programme : 1st Year B.Sc Mechanical Engineering
Year
: 1983, 1984, 1986, 1987, 1988, 1989
Content
: Techniques of Writing and Drawing lines, Geometry Drawings, First and
Third Angle Projection, Isometrics, True lengths and Shapes,
Intersections, Development of Surfaces, Sectional Drawing, Assembly
Drawing, Detail Drawing.
Course Name - Engineering Drawing
Programme : 1st Year Diploma Mechanical Engineering
Year
: 1983, 1984, 1986, 1987, 1988, 1989
Content
: Techniques of Writing and Drawing lines, Geometry Drawing, First and
Third Angle Projection, Isometrics, True lengths and Shapes,
Intersections, Development of Surfaces, Sectional Drawing, Assembly
Drawing, Detail Drawing
Course Name - Engineering Drawing
Programme : 1st Year B.Sc Electrical Engineering (Service Subject to Elect. Eng.
Faculty)
Year
: 1986, 1987, 1988, 1989, 1996, 1997
Content
: Techniques of Writing and Drawing lines, Geometry Drawings, First and
Third Angle Projection, Isometrics, Sectional Drawing, Assembly
Drawing, Detail Drawing.
14
Course Name - Engineering Drawing
Programme : 2nd Year B.Sc Human Resources Management and Development
Year
: 1996, 1997
Content
: Techniques of Writing and Drawing lines, Geometry Drawings, First and
Third Angle Projection, Isometrics, Sectional Drawing, Assembly
Drawing
Course Name - Product Design/System Design
Programme : 5th Year B.Sc Mechanical Engineering
Year
: 1995, 1996, 1997, 1998
Content
: Written and Verbal Presentation Skill, Data Gathering Methods, Design
Processes, Problem Solving Techniques & Process, Production
Engineering Drawing, Material Selections, Design Production Quality,
Optional Design Topics.
Course Name - Metrology Laboratory
Programme : 2nd Year B.Sc Mechanical Engineering
Year
: 1986, 1987
Content
: Introduction to Metrology, Measuring Tools Machines, Surface
Roughness, Geometrical Accuracy
Course Name - Industrial Design 01 (SRI 1014)
Programme : 1st Year B.Sc Industrial Design
Year
: 1997
Content
: Intoduction to Design, Elements of Design, Principles of Design
Course Name - Industrial Design 02 (SRI 1024)
Programme : 1st Year B.Sc Industrial Design
Year
: 1998
Content
: Design Visualisation, Sketching, Rendering and Visual Presentation
Course Name - Industrial Design 03 (SRI 2014)
Programme : 2nd Year B.Sc Industrial Design
Year
: 1999 - 2000
Content
: Design Visualisation, Sketching, Rendering and Visual Presentation,
Design Process, Model Making.
Course Name - Industrial Design 04 (SRI 2024)
Programme : 2nd Year B.Sc Industrial Design
Year
: 1999, 2000, 2001
Content
: Design Research, Product Specification, Design Development, Design
Visualisation, Sketching, Rendering /Visual Presentation, Design
Process, and Model Making.
Course Name - Industrial Design 07 (SRI 4014)
Programme : 4th Year B.Sc Industrial Design
15
Year
Content
: 2002/2003
: Research Methodology, Product Specification, Design Development,
Design Visualisation, Sketching, Rendering /Visual Presentation, Design
Process, and Model Making.
Course Name - Design Engineering (MMJ 2513)
Programme : 1st Year Master of Science in Engineering
Year
: 2001
Content
: Design Process, Ergonomics, Design Methodology, Engineering
Analyses.
Course Name - Industrial Design 08 (SRI 4025)
Programme : 4th Year B.Sc Industrial Design
Year
: 2002/2003
Content
: Research Methodology, Product Specification, Design Development,
Design Visualisation, Sketching, Rendering /Visual Presentation, Design
Process, Design for Manufacturing and Model/prototype Making.
Course Name - Workshop Practice (SRI 1062)
Programme :1st Year B.Sc Industrial Design
Year
: 2004
Content
: Introduction to wood working machines and hand tools. Model making
techniques using wood materials.
Course Name - Studio Presentation (SRI 1022)
Programme :1st Year B.Sc Industrial Design
Year
: 2004-2005
Content
: Media and techniques, Sketching, drawing, panel presentaion techniques,
verbal presentation, presentation folio and documentation.
Course Name - Sketching (SRI 1012)
Programme :1st Year B.Sc Industrial Design
Year
: 2004-2005
Content
: Material, media, surface and sketching techniques.
Course Name - Introduction to design (SMJ 3513)
Programme
Year
Content
: 3rd Year B. Sc Mechanical Engineering
: 2001-2005
: Introduction to Industrial Design, Definition, Design Process, Product
Planning, Market Survey, Concept Generations, Sketches, QFD,
Ergonomics, Engineering Drawing, Production Techniques, Project
Presentation.
Course Name - Introduction to design (SME 2512)
16
Programme
Year
Content
: 2nd Year B.Sc Mechanical Engineering
: 2005 - 2007
: Introduction to Industrial Design, Definition, Design Process, Product
Planning, Concept Generations, Sketches, Creative techniques,
Ergonomics, Engineering Drawing, Project Presentation.
Course Name - Innovation Management & Product Development (SRI 4282)
Programme : 4th year B.Sc Industrial Design
Year
: 2007 - 2009
Content
: Innovation Management, Intellectual Property, The Role of Technology
Transfer in Innovation, Product & Brand Strategy, New Product
Development (NPD), Managing NPD.
Course Name - Innovation Management & Product Development (SRI 2083)
Programme : 2nd year B.Sc Industrial Design
Year
: 2008 - 2011
Content
: Innovation Management, Intellectual Property, The Role of Technology
Transfer in Innovation, Product & Brand Strategy, New Product
Development (NPD), Managing NPD.
Course Name - Digital Photography (Elective Course – Third Year- SRI 3013)
Programme : 3rd year B.Sc Industrial Design
Year
: 2009 – 2011
Content
: History of photography, Photography equipment, Introduction to Digital
photography, technical aspects of a Camera, Lenses, Special techniques,
Lighting, Digital Imaging (picture into pixels, equipment for digital
imaging, editing digital images)
Course Name - Basic Invention (SPE 2032)
Programme : 2nd year Bachelor of Technology with Education
Year
: 2010, 2013
Content
: This course is designed to expose students in designing process. It will
emphasize on the relationship between invention and designing,
principles of the invention concept and its development. Activities that
are conducted will give students the opportunity to highlight one's talent
and creativity in developing invention projects through modelling and
folio. At the end of the course, students should be able to discuss and
apply the theories and principle of product design in designing new
product.
Course Name - Industrial Design (SPE 2622)
Programme : 2nd year Bachelor of Technology with Education
Year
: 2010
Content
: This course is design to expose students to the development of
consumer product design based on establish industrial design concept
especially appearances. It will emphasize on fundamental aspect of
design, related theories, development processes, project management,
17
creativity, information gathering, documentation and presentation,
problem identification and solving, human factors, aesthetic value, and
introduction to basic material and related technologies.
Course Name - Invention (SPL 4403)
Programme : 4th year Bachelor of Technology with Education
Year
: 2011 - present
Content
: This course is designed to expose the students in designing process. It
will emphasize on the situation that required design in solving problem,
information gathering regarding design, designing product by sketching
and drawing. Students will have opportunity to a process of developing a
product prototype starting from materials selection, product components
development, fitting, and finishing. The students also will have
opportunity to test and modify the prototype. At the end of the course,
students should be able to discuss and apply the theories and principle of
product design in designing new product.
Course Name - Basic Engineering Drawing (SPE 1002) –
Programme
: 1st year Bachelor of Technology with Education
Year
: 2011 – present
Content
: This course, a foundation for any advanced engineering courses, gives
exposure to students with the basics of drawing methods in engineering
drawing. Emphasis will be given on the construction and interpretation of
geometrical drawing, lines, writing techniques and lettering,
dimensioning, orthographic projection, isometric drawing, oblique and
auxiliary view are the topic covered in this course. Upon completing
from this course, student should be able to use the manual technique
using drafting board and drawing instruments to produce complete
drawing based on well defined technical drawing standard/conventions.
Course Name - Engineering Drawing 1 (SPE 1022) –
Programme
: 1st year Bachelor of Technology with Education
Year
: 2012 - present
Content
: This course is the continuation of the Basic Engineering Course (SPE
1002). Students will be taught in the various topics of geometrical
constructions namely Development, Perspective Drawing, and Sectional
Drawing. Students will also learn the application of engineering drawings
in the real-life context such as in the area of architecture, electrical and
electronic engineering, mechanical engineering and piping systems.
Course Name - Basic Innovation and Product Management (SPL4402)
Programme
: 4th year Bachelor of Technology with Education
Year
: 2013 - present
18
Content
: The course will present the principles of product development and
innovation and its application in the industry, innovation in the context of
strategic management and leadership, total quality management as
innovation strategy, product development process, innovation models
and processes, product innovation management, innovation strategies and
product life cycle. The course will give the students an opportunity to
expand their knowledge through individual and group tasks focusing on
product development and innovation. Their critical thinking abilities will
also be honed through guided discussions and synthesis of learning.
8. SUPERVISION OF THESIS
A. Bachelor of Mechanical Engineering
1) Student
Title
Year
:Abdul Wahab bin Jaafar
: Design of a Pesticide Sprayer for Tobacco Cultivation
: 1990 - 1991
2) Student
Title
Year
: Mohamed Ibrahim bin Ismail
: Oil Palm Fresh Fruit Bunch (FFB) Loose Fruits Collector Design
: 1995 – 1996
3) Student
Title
Year
: Mohd. Saleh bin Sahri
: Design of a Mobile Field Kitchen
: 1995 – 1996
4) Student
Title
Year
: Arif Kamal bin Yarudin
: Design of a Cross-kart
: 1995 – 1996
5) Student
Title
Year
: Capt. Muhamad bin Abu Kassim
: Design of a Zeroing Deviced for Rifle M16 and Steyr AUG.
: 1995 – 1996
6) Student
Title
Year
: Noor Azman bin Omar
: Development of a Low-powered Transporter
: 1996 – 1997
7) Student
Title
Year
: Tan Soon Chiang
: Cub Prix Motorbike Design
: 1996 – 1997
19
8) Student
Title
Year
: Lt. Comd. Norhayalim bin Abd. Aziz
: Portable Catamaran Sailing Boat Design
: 1996 – 1997
9) Student
Title
: Ismi Haidar bin Othman
: Cub Prix Motorbike Design Development (scope: Chassis, fairing,
Engine support design)
: 1996 – 1997
Year
10) Student
Title
Year
: Mohd Shahriman bin Sallehuddin
: Cub Prix Motorbike Design Development (Scope: Fairing design, fork,
trailing - arm design)
: 1996 – 1997
11) Student
Title
Year
: Mohd Zamri bin Othman
: Fibre-glass Racing Boat Design
: 1997 – 1998
12) Student
Title
Year
: Zahrin bin Zain
: Design of a Super-kart F1 (Scope: Fairing, Steering, Brake system)
: 1997 –1998
13) Student
Title
: Noradnan bin Masoud
: Design of a Super-kart F1 (Scope: Chassis, Engine Mounting,
Transmission)
: 1997 – 1998
Year
14) Student
Title
Year
: Mej. Tofrowaih bin Hj. Mat Amin
: Design of a Powered Target for Army Rifle Range
: 1997 – 1998
15) Student
Title
Year
: Mohd Nizam bin Mohd Noor
: Design of a Trailer for Carrying an Assault Boat
: 1997 – 1998
16) Student
Title
Year
: Yusoff Awang Damit
: Human-powered Water Vehicle
: 1998 – 1999
17) Student
Title
Year
: Lt. Afanizam bin Ali
: Design of a Zeroing Device for Browning and Heckler & Koch Pistols.
: 1998 – 1999
18) Student
Title
: Lt. Adi Ashran bin Mohd Salleh
: Mobile Field Kitchen Design (Scope: Design Refinement and
20
Year
Fabrication)
: 1998 – 1999
19) Student
Title
Year
: Zulkifli bin Yaacob (Co-supervision with Mr. Yahya Ramli)
: Hydraulics System Design for Moving Target
: 1998 - 1999
20) Student
: Abdul Halim bin Mahat
(Co-supervision with Assoc. Prof. Dr. Wan Ali Wan Mat)
: Oil Palm Trunk Mulcher
: 1998 – 1999
Title
Year
21) Student
Title
Year
22) Student
Title
Year
: Muhamad Kahirul bin Abdul Hamid
(Co-supervision with Assoc. Prof. Dr. Wan Ali Wan Mat)
: Oil Palm Bunch Mulcher (A)
: 1998 – 1999
: Lokman bin Haji Hussin
(Co-supervision with Assoc. Prof. Dr. Wan Ali Wan Mat)
: Oil Palm Bunch Mulcher (B)
: 1998 –1999
23) Student
Title
Year
: Mohd Tahir bin Shaharom
: Mobile Field Kitchen ( scope – components design and analyses)
: 1998 – 1999
24) Student
Title
Year
: Khaizul Azman bin Kasa
: Solar Tricycle (scope – concept design)
: 1998 -1999
25) Student
Title
Year
: Zakaria bin Ismail
: Design of an Electronic Target
: 1998 - 1999
26) Student
Title
Year
: Navin Kumar A/L Channa Krishnan (ATMA)
: Design of a Military Combat Shovel
: 1998 – 1999
27) Student
Title
Year
: Balvinder Singh A/L Jaktar Singh (ATMA)
: Helmet-cum-Ear Protector for Artilery Personnel
: 1998 – 1999
28) Student
Title
Year
: Chia Wing Thye (ATMA)
: Mobile Field Toilet for Malaysia Arm Forces.
: !998 - 1999
21
29) Student
Title
Year
: Mohamed Fadzly bin Abdul Kadir (ATMA)
(Co-supervision with Mr. Mohd Yazid bin Yahya)
: Pontoon Bridge Design for Military Application
: 1998 – 1999
30) Student
Title
Year
: Fadzly bin Fadzil (ATMA)
: Pentas Tabik Hormat Mudah-alih (saluting dice)
: 1999 - 2000
31) Student
Title
Year
: Suresh A/L Subramaniam (ATMA)
: Steyr AUG Rifle Design Concept
: 1999 - 2000
32) Student
Title
Year
: Mohamad Saiful bin Mohamad Rathy (ATMA)
: Disposable Field Toilet
: 1999 - 2000
33) Student
Title
Year
: Norhisham bin Hassan (ATMA)
: Portable First Aid Kit
: 1999 - 2000
34) Student
Title
Year
: Hasmawi bin Abdullah Hashim (ATMA)
: Combat Cross-bow for Army Special Forces
: 1999 - 2000
35) Student
Title
: Khairul Amir bin Mohd Yusuff
: Rekabentuk Super-kart CVT
(Co-supervision with Dr. Kamarul Baharin Tawi)
: 1999 - 2000
Year
36) Student
Title
Year
: Mohd Firdaus bin Che Sab (SPACE - Kulim Hi-Tech)
: Super-kart Formula-1 (Scope: Fairing)
: 1999 - 2000
37) Student
Title
Year
: Koay Heng Kia (SPACE - Kulim Hi-Tech)
: Human-Powered Water Recreational Vehicle - Basikal Air
: 1999 - 2000
38) Student
Title
Year
: Mohd Sufian bin Mamat
: Mobile Field Kitchen (scope: component design)
: 1999-2000
39) Student
Title
Year
: Norazlan bin Abdul Kadir
: Design of a Combat Tent
: 1999/2000
22
40) Student
Title
Year
: Hasrul Abu Hasan
: Design of an NGV Motorcycle
: 1999/2000
41) Student
Title
Year
: Safarudin bin Jemain
: Design development of an Artilery Helmet-cum-Ear Protector
: 1999/2000
42) Student
Title
Year
: Rosdi bin Baharin
: Design of an NGV Motorcycle.
: 1999/2000
43) Student
Title
Year
: Rapizan bin Rahman
: Design of a Wheel Chair-cum Stretcher
: 1999/2000
44) Student
Title
Year
: Zahrul bin Zakaria
: Electronic Dart Target Design Development
: 1999/2000
45) Student
Title
Year
: Noor Azwaimi bi Mohamad Noor (ATMA)
: Design Development of a Zeroing device for M16 and Styr AUG
: 2000/2001
46) Student
Title
Year
: Leong Cheng Sheung (ATMA)
: Design Development of a Combat Cross-bow for Army Special Forces.
: 2000/2001
47) Student
Title
Year
: Wan Mohd Zulkhibri bin Wan Mohd Zain
: Design Development of a Catamaran Sailing Boat for ROTU, UTM
: 2000/2001
48) Student
Title
Year
: Wong Chiew Yin
: Design Concept of a Tool for Fixing Concrete Steel Structure
: 2000/2001
49) Student
Title
Year
: Asraffadel bin Ishak
: Design concept of a Safety Helmet for JPA3 Rescue Team
: 2000/2001
50) Student
Title
Year
: Cheah Hun Lim
: Design Development of a Wheel Chair-cum-Stretcher
: 2000/2001
51) Student
Title
: Muhamad Ismanizam bin Isnin
: Design development of an NGV Cub Motorcycle
23
Year
: 2000/2001 (co-operation with FKKKSA, UTM)
52) Student
Title
Year
: Mohd Aman bin Armawai (ATMA)
: M16 dan Styr AUG rack design
: 2000/2001
53) Student
Title
Year
: Fakhrul Dahri bin Muhamed
: Design development of Super-kart F1 components
: 2000/2001
54) Student
Title
Year
: Faizal Muhamad bin Nasir
: Design development of Super-kart F1 components
: 2000/2001
55) Student
Title
Year
: Muhammed Azwan bin Ashaari
: To design a multi-purpose hospital bed
: 2000/2001
56) Student
Title
Year
: Mohd Rizal bin Ehsa
: PALAPES‟s Field Kitchen components design development
: 2000/2001
57) Student
Title
Year
: Mohd Zaidy bin Mohamad Nasir
: PALAPES UTM‟s Boat Trailer design development
: 2000/2001
58) Student
Title
Year
: Mohd Nizam bin Zakaria
: To design a portable "Dehydration" unit
: 2000/2001
59) Student
Title
Year
: Haryani bt. Md. Yunos
: Design development of a multi-purpose hospital bed
: 2001/2002
60) Student
Title
Year
: Suraya bt. Sikas
: To design a mobile clinic
: 2001/2002
61) Student
Title
Year
: Mazlan bin Abd Majid
: Design develoment of a Combat Cross Bow for Army Special Forces
: 2001/2002
62) Student
Title
Year
: Leong Siew Lee
: To design a solar street light
: 2002/2003
24
63) Student
Title
Year
: Chong Ren Pian
: To design a solar decoration light for residential used
: 2002/2003
64) Student
Title
Year
: Mohd Alfian bin Mohd Mustafa Azmi
: To design a portable flat tyre changing device
: 2002/2003
65) Student
Title
Year
: Abby Hazrin bin Ibrahim
: To design a catamaran deck (for PALAPES (marine) UTM)
: 2002/2003
66) Student
Title
: Asmawati bt Mansor
: To design a continuous weighing and packing machine for food
industry
: 2002/2003
Year
67) Student
Title
Year
: Chan Yew May
: To study the role of Elements of Design to fulfill the needs of
ergonomics for industrial product.
: 2002/2003
68) Student
Title
Year
: Tan Kuam Keng
: Design concept Styling of a Malaysia Mobile Home
: 2002/2003
69) Student
Title
Year
: Teo Hwee Hong
: Design concept of a SWATH boat for tourist purposes.
: 2002/2003
70) Student
Title
Year
: Nur Lukman bin Ahmad Suhaimi
: Design of a Multi-purpose Trailer Wagon.
: 2002/2003
71) Student
Title
Date
: Halijah bt. Ibrahim
: Design/styling of a Malaysian MPV
: 2002/2003
72) Student
Title
Date
: Ezwan Ekmal bin Khalid
: Concept Design of a Mini Power Boat
: 2002/2003
73) Student
Title
Date
: Teo Pei Kian
: Concept and Styling of a Malaysian Motorhome
: 2002/2003
25
74) Student
Title
Date
: Zafrul Izzaq bin A. Aziz
: Study on the problem and design of a portable public toilet
: 2003/2004
75) Student
Title
Date
: Lim Sook Choo
: A study of successful product design by Malaysian Product Designers
: 2003/2004
76) Student
Title
Date
: Farihah binti Ismail
: To design a garbage collector for river.
: 2003/2004
77) Student
Title
Date
: Tan Ee Fei
: The importance of Ergonomics for consumer products
: 2003/2004
78) Student
Title
Date
: Wong Chis Sing
: Role and contributions of Industrial Designers in Automotive industry
: 2003/2004
79) Student
Title
Date
: Yoong Fui Ni
: Role and importance of elements of design in furniture design
: 2003/2004
80) Student
Title
: Hii Ching Chyn
: The study on the application of electronic technology for consumer
products (electronic musical instrument)
: 2003/2004
Date
81) Student
Title
Date
: Mohamed Faizal bin Ahmad Puzi
: The Model making Process in Automotive industry with reference to
Proton
: 2003/2004
82) Student
Title
Date
: Josiah Chong Wun Tzen
: The Role of Industrial Design in Product identification
: 2004/2005
83 Student
Title
Date
84) Student
Title
Date
: Zarini bt Zainal Abidin
: Colour study on children age 4-6 years old.
: 2004/2005
: Lim Yao Han
: Presentation Techniques in Industrial Design
: 2004/2005
85) Student
: Sugeh Budee bin Qamaruzzaman
26
Title
Date
: Ergonomics study and design of a computer table
: 2004/2005
86) Student
Title
Date
: Neau Ker Sing
: Definition of Function and Aesthetics in Todays Industrial Products
: 2004/2005
87) Student
Title
Date
: Saiful Bahari Ahmad
: Car Dashboard Design – A study
: 2004/2005
88) Student
Title
: Mohd Hafez bin Md. Noor
: Case Study on The Facilities Required in Running Industrial Design
Degree Course in Institution of Higher Learning in Malaysia.
: 2005/2006
Date
89) Student
Title
Date
: Mohd Hafiz bin Zaabar
: Case Study on Industrial Design Curricullum in Institution of Higher
Learning in Malaysia.
: 2005/2006
90) Student
Title
Date
: Tay Jie Wen
: A Study on Elements of Design in Furniture Design.
: 2005/2006
91) Student
Title
Date
: Gun Lek Seng
: A Case Study on Elements of Design in Mobile Phone Design.
: 2005/2006
92) Student
Title
Date
: Amir Fadzli bin Abd Ghani
: The Role of Sketching and Drawing in Generating Creativity
: 2006/2007
93) Student
Title
Date
: Norulhisyam bin Samsudin
: The Development in National Car Design.
: 2006/2007
94) Student
Title
: Mohd Rashdan bin Omar
: Study on Kelantan Top Design Development and Designing Product with
Top‟s Motive
: 2007/2008
Date
95) Student
Title
Date
: Mohd Khaidir bin Jusoh
: Design Development of Popular Sports Trophy in Malaysia
: 2007/2008
27
96) Student
Title
Date
: Muhamad Suhaimy bin Imran
: Design of a Multi-purpose Bed
: 2007/2008
97) Student
Title
Date
: Nor Mohd Irshahrin bin Nordin
: To Study and Design of a Portable Public Toilet
: 2007/2008
98) Student
Title
Date
: Mohd Ridhwan bin Zainal Abidin
: A Device to Collect Garbage in the River
: 2007/2008
99) Student
Title
: Law Jian Haw
: Case Study on the ID students at Institute of Higher Learning
Performance in Sketching.
: 2007/2008
Date
100) Student : Wong Kah Fei
Title
: Green Design- Designer Role & Responsibility
Date
: 2008/2009
101) Student : Tan Lip Chong
Title
: The Role & Importance of Elements of Design in Furniture Design
Date
: 2008/2009
102) Student : Ng Way Gan
Title
: The Study of Wood Shaping and Forming Technology in Furniture
Making
Date
: 2008/2009
103) Student : Chia Lee Ping
Title
: The Comparison of Surrealism and Funky on Product
Date
: 2008/2009
104) Student : Lee Cheng Yee
Title
: Study of Ergonomics on Control Interface Between Human and
Electronic Product
Date
: 2008/2009
105) Student : Woo Kin Hee
Title
: Permissible Design in Manufacturing Plastic Products
Date
: 2008/2009
106) Student : Yasmin bt Musa
Title
: The Elements of Design in Furniture
Date
: 2008/2009
28
107) Student : Khor Ling Shan
Title
: Design Evolution of Concept Car
Date
: 2008/2009
108) Student : Nasaruddin Shah bin Morani
Title
: The Adaptation of Computer 3-Design Modelling for Industrial
Date
: 2008/2009
109) Student : Mohamad Hafizuddin bin Zainal
Title
: Ergonomics Problems Among Superbike Users
Date
: 2009/2010
110) Student : Choo Fook Sin
Title
: Design For a Better Tomorrow
Date
: 2009/2010
111) Student : Khoo Sweed Ting
Title
: Study of The Contribution of Design Elemnts to Fulfill the Ergonomics
of Sport Shoes
Date
: 2009/2010
112) Student : Zainol Azuan bin Ab Rahim
Title
: Rekabentuk Kereta Nasional Malaysia dari Perspektif Perekabentuk
Tempatan
Date
: 2009/2010
113) Student : Mohamad Hafis bin Razali
Title
: 3D Modelling As A Visualise Medum in Design
Date
: 2009/2010
114) Student : Jacky Teoh
Title
: Computer Aided Graphic In Design, Necessity Or Privellage
Date
: 2009/2010
115) Student : Pee Nai Quan
Title
: Branding Of Furniture
Date
: 2009/2010
116) Student
Title
Date
117) Student
Title
Date
: Gan Syn Hong
: The Role Of Design Element To Satisfy Ergonomics Need For Car
: 2009/2010
: Chai Jun Dak
: Analysis Of The Sport Car Design
: 2009/2010
118) Student : Ong Ping Hwa
29
Title
Date
: The Study On Interior Lighting Product
: 2009/2010
119) Student : Teoh Shi Xian
Title
: Study Of Headphone, In-Ear Phone And Wireless Handfree
Date
: 2009/2010
120) Student : Lee Shan Wen
Title
: To Study Car Dashboard Design
Date
: 2009/2010
121) Student : Tay Sinn Yee
Title
: Composite Wood
Date
: 2010/2011
122) Student : Nor Humairah Binti Hamdan
Title
: Ergonomic Study In Primary School Bag
Date
: 2010/2011
123) Student : Mohd Hafiz Bin Hamzah
Title
: Peranan Dan Sumbangan Lakaran (Sketch) Dan Lukisan (Drawing)
Dalam Penjanaan Kreativiti
Date
: 2010/2011
124) Student : Mohd Amirul Akram Bin Mahd Razan
Title
: Kajian Kes-Persepsi Masyarakat Fkm Terhadap Pelajar Program Sri
Date
: 2010/2011
125) Student : Ooi Shi Jia
Title
: Design And Emotion
Date
: 2010/2011
126) Student : Koh Tiam Siong
Title
: Kajian Kes-Kemahiran Generik (Generic Skills) Di Kalangan Pelajar
Date
: 2010/2011
127) Student : Umi Nurul Farahin Bnti Abdul Karim
Title
: Pencapaian Kemahiran Generik Dalam Bidang Rekabentuk Industri
Date
: 2010/2011
128) Student : Lee Huangshi
Title
: To Study Tables And Chairs Design In An Education Environment
Date
: 2010/2011
129) Student : Lim Beng Heng
Title
: Ergonomics Study of Rugby Training Equipment
Date
: 2010/2011
30
B. Master of Engineering
1) Student
Title
Year
: Yusri bin Yusof
: Product Design Cycle
: 1997 – 1999 (incomplete)
2) Student
Title
Year
: Zakaria bin Ibrahim (co-supervised)
: An Examination of the Use of Cross-functional Teams/Concurent
Engineering in Design of a New Product
: 1998 – 1999 (withdrawn)
3) Student
Title
Year
: Suhaimy bin Ahmad (co-supervised)
: Rekabentuk Konsep Penutup (Canopy) untuk motosikal
: 2001 – 2002 (completed his degree at Faculty of Education, UTM)
4) Student
Title
Year
: Noor Azizah bt. Awang @ Shafie (Main Supervisor)
: Ergonomic Design for Hovercraft Interior
: November 2002
5) Student
Title
: Nor Azmin bin Md. Nor (co-supervised)
: A Study On Manual Handling (Mh) And Its Hazards Towards
Malaysian Palm Oil Harvesters
: June 2005
Year
6) Student
Title
Year
: Maisarah bt Azhar
: Eco Design in Packaging Industry
: 2008 – 2012 (completed
7) Student
Title
Year
: Teo Pei Kian
: To Develop A Child Care Center Design in Malaysia
: 2009 – 2012 (completed)
8) Student
Title
: Wan Faizatul Atiqah bt Ismayatim
: Issues of Erhgonomics Hazard in Workplace: Manual Material Handling
in Agriculture
: 2010 – (withdrawn)
Year
9) Student
Title
Year
: Nurhidayah bt Sarkawi
: Proton Future Urban Mobilty Electric Vehicle Concept
: 2010 – present
10) Student
Title
Year
: Norhelmy Lobb bin Sad Lobb
; Design Trends of Eco Cars
: 2010 – present
31
C. Doctor Of Philosophy
1) Student
Title
Year
: Siew Chee Kwong
: Design Strategy of Common Interior Platform to Meet Requirement of
Budget Compact Car (Proton GSC) and Premium Compact car (Lotus
LCC) for Local & Inetrnational Market
: 2010 – 2012 (withdrawn)
2) Student
Title
Year
: Azlan bin Othman
: Quantify Heptic Qualities for Real World Automotive Applications
: 2010 - present
3) Student
Title
Year
: Zaidy bin Samsudin
: Automotive Design Trends Foreasting & Best Practice Methodology
: 2010 - present
4) Student
Title
Year
: Nurul Ain binti Abdull Mutalib
: To be confirmed
: 2012 – present
5) Student
Title
Year
: Rahmah binti Md Yusof
: To be confirmed
: 2012 - present
9. SUPERVISION OF STUDENTS ACTIVITIES
9.1 Training (In-campus training)
a) Project Title
Duration
No: of Students
: Fabrication of a “cross-cart” Prototype
: 6 weeks (May – June 1988)
: 12 students
b) Project Title
Duration
No: of Students
: Design Development and Fabrication of a “cross-cart” Prototype
: 6 weeks (May – June 1989)
: 8 students
c) Project Title
Duration
No: of Students
: Design and Fabrication of a Go-cart
: 6 weeks (May – June 1990)
: 8 students
32
9.2 Design Project Supervision for Malaysian Military Academy (Akademi Tentera
Malaysia (ATMA) Cadet:
Zeroing Aid for Rifle M16 and Styr AUG (1996)
Catamaran Sailing Boat for Navy Cadet‟s Training (1996)
Electronic Target for Malaysian Army Rifle Range (1997)
Zeroing Aid for Browning and HK 9PS Pistols (1998)
Trailer Type Field Kitchen (1998)
Portable Combat Shovel (1998)
Disposable Field Toilet (1998)
Mobile Field Toilet (1998)
Portable Saluting Dice (1998)
Styr AUG Concept Rifle for Malaysian Army (1999)
Combat Tent (1999)
Cross-bow for Malaysian Army Special Force (1999, 2000)
Electronic D.A.R.T. Target (1999, 2000)
Mobile Field Kitchen Components Design (2000).
Rifle Storage Rack for M16 Rifle dan Steyr A Rifle (2000)
Cross-bow Design Development for Malaysian Army Special Force (2001)
9.2 Supervision of Students Industrial Training (Out-campus Training)
1984: Kilang Peluru, Batu Arang, Selangor
1987: Suzuki Assembly, Prai, Penang; Hong Leong Shipyard, Prai, Penang
1988: Mattel Malaysia Private Limited, Seberang Prai; GEC, Kulim, Kedah
1989: Kilang Kelapa Sawit Jawi, Jawi, Seberang Prai; Kedah Sugar Refiney
Limited
1990: Motorola , Sg, Way, Petaling Jaya, BATA (M) Sdn. Bhd. Klang, Selangor
1991: Several factories in Sg. Way and Petaling Jaya.
1997: Robert Bosch (M) Sdn. Bhd, Bayan Lepas, Penang; Hewlett Packard (M)
Sdn.Bhd, Bayan Lepas, Penang; Siemens Semiconductors Sdn. Bhd, Bayan
Lepas, Penang; Intel Technology Sdn. Bhd, Bayan Lepas, Penang; Escoy
Smelting, Jalan Datuk Keramat, Penang
2002: GKY Machinery (M) Sdn. Bhd, Johor; Taichong Engineering & Steelworks
Sdn. Bhd.; Tanah Temasik Sdn. Bhd, Johor; Harta Consults Sdn. Bhd.
Johor; Pejabat Pengarah Kerja Raya Johor; Broadway Foam Sdn. Bhd.,
Johor, Plastrade Group of Companies, Johor; Volvo Malaysia Sdn. Bhd.
Johor; Oriental Assemblers Sdn. Bhd. Johor; Orcadesign Consultants Sdn.
Bhd. Johor.
33
9.3 Organising/supervising Students Project/Activities:
1. Organised study visit to Industrial Design Department, Faculty of Art & Design ,
UiTM, Shah Alam ( July 1999)
2. Organised study visit to Industrial Design Department, Faculty of Art & Design ,
UiTM, Shah Alam and ITEX 2000 Exhibition at The Mines KL (Aug 2000)
3. Organised study visit to SWAN STABILLO factory at Tampoi, Johor Bahru (Mac
2001)
4. Co-Organiser SWAN STABILLO Ball-point Pen Design Competition ( Mac-May
2001)
5. Organised study visit to Bean Sprout Sdn. Bhd (for designing project on bean sprout
cleaning machine, separating machine and weighing & packing machine) (Nov 2001)
6. Organised study visit to PROTON Shah Alam for Industrial Design Degree students‟
(1st February 2002)
7. Organised “Industrial Design Night” held at Pulai Spring Resorts (2002,2003, 2004,
2005, 2006, 2007, 2008, 2009)
8. Organised “Industrial Design Saturday” held at Dewan Sultan Iskandar, UTM (2005)
9. Organised “Industrial Design Final Year Degree Show” (2001, 2002, 2003, 2004,
2005, 2006, 2007, 2008, 2009)
10. Organised Industrial Design Motivation Camp held at Sekakap Camp, Mersing (2005,
2006, 2007, 2008)
11. Organised “Industrial Design Saturday” held at Dewan Sultan Iskandar, UTM (2008)
10. ASSESSMENT ROLE
1. Examiner – STPM/HSC Art Paper (1988 – 1989)
2. External Examiner – Final Year Diploma Art & Design (Industrial Design), MARA
Institute of Technology, Shah Alam, Selangor ( 1987 – 1988)
3. Thesis External Examiner - Final Year Diploma Art & Design (Industrial Design),
MARA Institute of Technology, Shah Alam, Selangor ( 1987 – 1988)
4. Assessor – Article word entry “Tank” for Science and Technology Encyclopedia,
UTM/DBP (1996)
5. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design
(Industrial Design), MARA Institute of Technology, Shah Alam, Selangor (Oct,
1998)
6. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design
(Industrial Design), MARA Institute of Technology, Shah Alam, Selangor ( May,
34
1999)
7. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design
(Industrial Design), MARA Institute of Technology, Shah Alam, Selangor ( 3-4 Nov,
1999)
8. Internal Examiner - Master of Engineering (Mechanical) School of Post-Graduate
Studies, UTM, Kampus Skudai, Johor (Oct 1999) Candidate: Md. Afendi M.
Yusuf) (Title: The Study of Model Making Using Parafine Wax)
9. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan
& Tan, Jln Tun Razak, Kuala Lumpur. (18 Nov, 1999)
10. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design
(Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor (
28-29 April, 2000)
11. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan
& Tan, Jln Tun Razak, Kuala Lumpur. (3rd August, 2000)
12. Judging panel - Design Project for Secondary School in conjunction with Kolej Tun
Hussien Onn Cultural Day "Eksvanitra" 2000, UTM. (12th August, 2000)
13. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan
& Tan, Jln Tun Razak, Kuala Lumpur. (19th September, 2000)
14. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design
(Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor (
8-9 November, 2000)
15. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design
(Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor (
19th – 20th April, 2001)
16. Judging Panel – Swan STABILLO Ball-point Pen Design Competition, Organiser by
Swan Stabillo (M) Sdn. Bhd, Kawasan Perindustrian Tampoi, Johor and Faculty of
Mechanical Engineering, UTM. (4th July 2001)
17. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan
& Tan, Jln Tun Razak, Kuala Lumpur. (21st August, 2000)
18. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design
(Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor
( 3rd – 4th October, 2001)
19. Judging Panel – Go-cart design competition, Organiser by Kolej Universiti Teknologi
35
Tun Hussien Onn, Batu Pahat, Johor. (9th-11th November 2001)
20. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design
(Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor (
28-30 March, 2002)
21. External Examiner – Final Year Diploma in Industrial Design, for Kolej Ugama
Sultan Zainal Abidin (KUZA), Kuala Terengganu, Terengganu (17-19 February
2002)
22. External Examiner – Final Year Diploma in Industrial Design, for Polytechnic Johor
Bahru, Johor (19 April 2002)
23. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan
& Tan, Jln Tun Razak, Kuala Lumpur. (30th July, 2002)
24. External Examiner – Final Year Bechelor of Design (B. Des) Art & Design
(Industrial Design), University Technology MARA (UiTM), Shah Alam, Selangor
(30 September – 1 October, 2002)
25. Judging Panel – IKM (Institut Kemahiran MARA) Design Competition held at IKM,
Jasin, Melaka (26-27 October 2002)
26. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan
& Tan, Jln Tun Razak, Kuala Lumpur. (19 November, 2002)
27. External Examiner – Master of Art & Design (Industrial Design), Universiti
Teknologi MARA, Shah Alam, Selangor (18 December 2002), Candidate: Imran
bin Abdullah, (Title:The Tole of Industrial Design Consultants in Improving
Malaysian Made Product)
28. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, Menara Tan
& Tan, Jln Tun Razak, Kuala Lumpur. (31 July, 2003)
29. Judging panel – Science Innovation Project Competition for Secondary School in
conjunction with UTM‟s 31st Convocation 2003, UTM. (7th August, 2003)
30. Judging Panel – IKM (Institut Kemahiran MARA) Design/Innovation Competition
held at Malaysian Institute of Aviation Technology (MIAT), Sepang, Selangor (4-5
October 2003)
31. Judging Panel - Malaysia Good Design Mark, Malaysia Design Council, SIRIM,
Shah Alam, Selangor. (6 January, 2005)
32. External Examiner – Master of Science (Product Design), Universiti Putra Malaysia,
Selangor (22 March 2005) Candidate: Jamilludin bin Mohd Noor, (Title: Quality
36
and Identity of Electrical Product Made in Malaysia from The Perspective of User
and Relationship with New Product Development Policy)
33. External Examiner – 1st Year (2nd Semester) Bachelor of Applied Arts (Industrial
Design), for Kulliyah of Architecture & Environmental Design, International Islamic
University of Malaysia (Sept 2005)
34. External Examiner – Master of Art & Design (Industrial Design), Universiti
Teknologi MARA, Shah Alam, Selangor (17 October 2005), Candidate:
Mohammad Zaki bin Sharifuddin, (Title: Interaction Design Content and Method:
A Case Study on Industrial Design Students)
35. External Examiner – 2nd Year ( 3rd Semester) Bachelor of Applied Arts (Industrial
Design), for Kulliyah of Architecture & Environmental Design, International Islamic
University of Malaysia (April 2006)
36. External Examiner – 2nd Year (4th Semester) Bachelor of Applied Arts (Industrial
Design), for Kulliyah of Architecture & Environmental Design, International Islamic
University of Malaysia (October 2006)
37. External Examiner – 3rd (5th semester) Year Bachelor of Applied Arts (Industrial
Design), for Kulliyah of Architecture & Environmental Design, International Islamic
University of Malaysia (21 March 2007)
38. External Examiner –2nd Year (4th semester) Diploma in Industrial Design, for
Southern College, Johor Bahru, Johor (17 March 2007)
39. External Examiner –3rd Year (5th semester) Diploma in Industrial Design, for
Southern College, Johor Bahru, Johor (17 March 2007)
40. External Examiner –3rd Year (6th semester) Diploma in Industrial Design, for
Southern College, Johor Bahru, Johor (6 December 2008)
41. External Examiner – Final Year Bachelor of Applied Arts (Industrial Design), for
Kulliyah of Architecture & Environmental Design, International Islamic University of
Malaysia (4 April 2008)
42. External Examiner –Doctor of Philosophy (Interior Design), Faculty of Architecture
& Survey, Universiti Teknologi MARA, Shah ALAM, Selangor (2008) Candidate:
Abdul Halim bin Abdul Manaf, (Title: School Furniture Ergonomics: Optimal
Design Criteria for Standard Requirements in Malaysia Education System)
43. Internal Examiner – Master of Engineering, Faculty of Mechanical Engineering,
Universiti Teknologi Malaysia, (2008) Candidate: Norzilawaty bt. Mohamed
Samsudin (Title: Application of Quality Function Deployment in Multimedia
Integrated Telephone Kiosk (MITek) Design)
37
44. External Examiner – Master of Science (Built Environment), Kulliyah of Architecture
& Environmental Design, International Islamic University of Malaysia, (2009)
Candidate: Mohd Yaser Omari (Title: An Ergonomic Concept Design of A
Motorbike With Prototyping) (11 March 2009)
45. External Examiner – Final Year Bachelor of Applied Arts (Industrial Design), for
Kulliyah of Architecture & Applied Arts (20 April 2009)
46. Assessment Panel - for Malaysia Qualification Agency (MQA)(Formerly known as :
National Board of Accreditation (LAN) - Private Colleges & University Colleges
Assessed (2003-2013):1. Programme Name: Diploma Fotografi
IPTS Name: Akademi Kewartawanan dan Komunikasi Hanxing
2. Programme Name: Diploma in Industrial Design
IPTS Name: Institut Putra
3. Programme Name: Bachelor of Arts (Hons) in Animation & Games
Design
IPTS Name: Kolej Universiti Teknologi Kreatif Limkokwing
4. Programme Name: Bachelor of Computer Animation
IPTS Name: Kolej Universiti Teknologi Antarabangsa Twintech
5. Programme Name: Diploma in Industrial Design
IPTS Name: PJ College of Art & Design
6. Programme Name: Bachelor in Games Art & Animation (Hons)
IPTS Name: Kolej Universiti Teknologi & Pengurusan Malaysia
7. Programme Name: Diploma Seni Lukis & Seni Reka (Grafik & Media
Digital)
IPTS Name: Kolej IKIP, Kuantan, Pahang.
8. Programme Name: Bachelor of Arts (Hons) in Games Art
IPTS Name: Kolej Universiti Teknologi Kreatif Limkokwing
38
9. Programme Name: Bachelor of Arts (Hons) in Product Design &
Innovation
IPTS Name: Kolej Universiti Teknologi Kreatif Limkokwing
10.Programme Name: Bachelor of Design (Hons) in Digital Product Design
IPTA Name: Universiti Teknologi MARA, Shah Alam.
11. Programme Name: Diploma in Product Design
IPTS Name: Kuala Lumpur Metropolitan Unversity College (KLMUC)
12. Programme Name: Bachelor of Arts (Hons) in Product Design Futures
IPTS Name: Kolej Universiti Linton, Mantin, Negeri Sembilan.
13. Programme Name: Dipoma in Product Design
IPTS Name: Kolej Universiti Teknologi Kreatif Limkokwing
14. Programme Name: Diploma & Bachelor in Product Design
IPTS Name: Raffles University Iskandar, Nusajaya, Johor.
47. External Examiner –3rd Year (6th semester) Diploma in Industrial Design, for
Southern College, Johor Bahru, Johor ( June 2010)
48. Examiner - EAC Accreditation for Engineering Faculty, UNIMAP, Perlis (18-20
Mei 2010)
49. External Examiner – Final Year Bachelor of Applied Arts (Industrial Design), for
Kulliyah of Architecture & Applied Arts (14th April 2011)
50. External Examiner – Year 1-3, Bachelor of Applied Arts (Industrial Design), for
Kulliyah of Architecture & Applied Arts (21th May 2012)
51. External Examiner –Doctor of Philosophy (Industrial Design), Faculty of Applied
and Creative Arts, Universiti Malaysia Sarawak Kota Samarahan, Sarawak (14 Sept
2012) Candidate: Ahmad Zuhairi bin Abdul Majid, (Title: Design Strategy in
Service Innovation of Automobile Service Center in Klang Valey)
52. External Examiner – Final Year, Bachelor of Arts (Industrial Design), for
Department of Industrial Design, Faculty of Design & Architecture, Universiti Putra
39
Malaysia, Serdang, Selangor. (20th June 2012)
53. External Examiner –3rd Year (6th semester) Diploma in Industrial Design, for
Southern University College, Johor Bahru, Johor (2nd August 2012)
54. Internal Examiner –Master of Science (Industrial Design), Dept of Industrial
Design, Razak School of Engineering & Advanced Technology, (20 December
2012) Candidate: Liew Yong Kian (Title: Computer Tools in Ideation Process)
11. SEMINAR/CONFERENCE/WORKSHOP/COURSES ATTENDED
11.1 Seminar/Conference/Workshop Attended:
1) Seminar
Venue
Date
Organiser
: Japanese Handicraft
: Equatorial Hotel, Kuala Lumpur
: 17th- 19th March 1983
: Japan External Trade Organisation (JETRO)
2) Seminar
Venue
Date
Organiser
: Modeling & Simulation in Engineering
: UTM, Jalan Semarak
: 4th – 5th June 1986
: Mechanical Engineering Faculty, UTM
3) Workshop
Venue
Date
Organiser
: Workshop on Industrial Design
: Ministry of Trade, Damansara, Kuala Lumpur
: 29th July 1988
: Malaysian Invention & Design Society (MINDS) and
Ministry of Trade
4) Workshop
Venue
Date
Organiser
: Workshop on Airbrush Presentation Techniques
: UTM, Jalan Semarak
: 22nd – 24th February 1988
: Training Unit, UTM
5) Seminar
Venue
Date
Organiser
: Territorial Army Seminar
: Territorial Army Training Center, Ipoh, Perak
: 21st – 22nd July 1989
: Territorial Army Directorate, Ministry of Defence
6) Workshop : Workshop on Translation
Venue
: UTM, Skudai, Johor
Date
: 24th – 26th July 1990
40
Organiser
: DBP and UTM
7) Workshop
Venue
Date
Organiser
: Workshop on Fisrt Year Engineering Education
: UTM, Skudai, Johor
: 16th – 18th July 1991
: Training Unit, UTM
8) Seminar
Venue
Date
Organiser
: Design Production
: National University of Malaysia (UKM) Bangi
: 26th – 27th July 1991
: UKM‟s Student Union, UKM
9) Seminar
Venue
Date
Organiser
: Head of Art & Design on Art Education in U.K.
: Rutland Hotel, Sheffield, UK
: February 1993
: Council of National Academic Awards (CNAA) U.K.
10) Seminar
Venue
Date
Organiser
: Agricultural Mechanisation
: Awana Golf Resort, Genting Highland
: 25th – 27h May 1993
: MARDI and Agri. Inst. Of Malaysia (AIM)
11) Conference: National Conference on Engineering Education and Research
Venue
: Agricultural University (UPM), Serdang, Selangor
Date
: 15th – 16th May 1993
Organiser : Engineering Faculty, UPM
12) Seminar
Venue
Date
Organiser
: Rakan Muda Rakan Rekacipta
: UTM, Skudai, Johor
: 16th January 1996
: Ministry of Culture & Sports
13) Workshop : Workshop on Total Quality Management
Venue
: Kelana Kaya, Kuala Lumpur
Date
: 3rd – 6th June 1996
Organiser : Army Training and Doctrine Headquarters, Ministry of Defence and
Department of Civil Services (JPA)
14) Conference: Design Conference
Venue
: Shangri-La Hotel, Kuala Lumpur
Date
: 14th – 16th October 1996
Organiser : Malaysian Design Council (MDC)
15) Conference: ASEAN Ergonomics 97‟
Venue
: Renaissance Hotel, Kuala Lumpur
Date
: 6th – 8th November 1997
41
Organiser : South East Asean Ergonomics Society (SEAES) and University Malaysia
Sarawak (UNIMAS)
16) Seminar
Venue
Date
Organiser
: Safety and Rescue Campaign
: Puteri Pan Pacific Hotel, Johor
: 25th April 1998
: Malaysia Emergency Team (PTCM) Road Safety Council of Malaysia
17) Seminar
Venue
Date
Organiser
: National Seminar on Invention and Design in Education 1998
: Curriculum Development Centre, Ministry of Education, Kuala Lumpur
: 12th – 15th October 1998
: Malaysia Design Council and Ministry of Education Malaysia.
18) Seminar
Venue
Date
Organiser
: Seminar on Smart Innovation – From R&D to Market
: Industrial Center, Technovation Park, UTM, Skudai
: 21st November 1998
: Innovation Bureau and Consultancy, UTM.
19) Seminar
Venue
Date
Organiser
: Seminar on Invention – Rakan Muda, Rakan Rekacipta 98‟ (Presenter)
: ITTHO, Batu Pahat, Johor.
: 28th December 1998
: Malaysia Design Council , Ministry of Science Environment and UTM.
20) Seminar
Venue
Date
Organiser
: Education Convention 99, UTM
: UTM, kampus Skudai
: 10th Novemvber 1999
: UNIPEN, Human Resources Development Unit, SPACE, UTM
21) Seminar
: Forum on Malaysia's Economy with Majlis Tindakan Ekonomi Negara
(MTEN)
Venue
: University Technology Malaysia
Date
: 14th June 2000
Organiser : UTM and MTEN
22) Conference: Asia Pacific Design Conference and Design Exhibition 2000 (Presenter)
Venue
: Putera World Trade Center, Kuala Lumpur
Date
: 10th- 12th October 2000
Organiser : Malaysia Design Council & Japan Design Foundation (JDF)
23) Workshop : Wokshop on Rakan Muda Rakan Rekacipta Johor.
Venue
: Dewan kuliah 1, Faculty of Mechanical Engineering, UTM, Skudai
Date
: 9th November 2000
Organiser : Technology Design Center UTM and Ministry of Science, Technology &
Environment Johor.
24) Seminar
: Design for The New Millennium (chairperson)
42
Venue
: Hotel Puteri Pan Pacific, Johor Bahru, Johor
Date
: 15th January 2001
Organiser : Design Dept.UTM, SIRIM and Malaysia Design Council.
25) Seminar
Venue
Date
Organiser
: Managing Quality Measurement for Government Sector
: PJ Hilton Hotel, Petaling Jaya
: 8th -9th August 2001
: National Productivity Council, Malaysia
26) Conference: First National Conference for Enterpreneur and Small Bussiness.
(Presenter)
Venue
: Langkawi City Bayview Hotel
Date
: 8th-9th September 2001
Organiser : Universiti Utara Malaysia
27) Conference: 5th Asian Design Conference and Design Symposium. (Presenter)
Venue
: Seoul National University, South Korea.
Date
: 11th – 13th October 2001
Organiser : KAIST, Korea; JDF, Japan; CDS, China.
28) Seminar
Venue
Date
Organiser
: Education Convention 2001, UTM
: Eden Garden Hotel,Johor Bahru, Johor.
: 7th November 2001
: UNIPEN, Human Resources Development Unit, SPACE, UTM
29) Conference: Malaysia Design Conference 2003
Venue
: Pan Pacific Hotel,Kuala Lumpur.
Date
: 8th – 9th October 2003
Organiser : Malaysia Design Council (Presenter)
30) Seminar
Venue
Date
Organiser
: Learning Skill for SPACE Students.
: Block N24 UTM Skudai , Johor
: 20th May 2004
: School of Profesional and Cotinuous Education (S.P.A.C.E.) UTM
31) Seminar
Venue
Date
Organiser
: "Wacana Ilmu"
: Dewan Senat, UTM
: 7/9/2004
: Human Resources Dept UTM
32) Conference: Conference on Engineering Education (CEE 2004),
Venue
: Renaissance Hotel, Kuala Lumpur.
Date
: 14-15th December 2004
Organiser : SPACE, UTM and Institute of Engineers Malaysia (IEM) & Malaysian
Council of Engineering Deans (MCED) (Presenter)
43
33) Seminar
Venue
Date
Organiser
: "Network Centric Warfare"
: Hyatt Regency Hotel, Teluk Cempedak, Kuantan
: 9-11/12/2004
: Ministry of Defence
34) Conference: National Conference on Skills & Competencies in Education
Venue
: School for Humanities Studies, USM
Date
: 29-30th December 2005
Organiser : School for Humanities Studies, USM (Presenter)
35) Seminar
: Half Day Seminar On Engineering Education "OBE",
Venue
: Rumah Alumni, UTM
Date
: 9th December 2005
Organiser : Faculty of Chemical Engineering & Natural Resources Engineering,
UTM
36) Seminar
Venue
Date
Organiser
: Forum on “Islam Hadhari”
: Kolej Universiti Tun Hussein Onn, Batu Pahat
: 4/8/2005
: Kolej Universiti Tun Hussein Onn, Batu Pahat
37) Seminar
: Territorial Army Commanding Officer‟ Dialog
Venue
Date
Organiser
: Guoman Hotel, Port Dickson
: Oct 2006
: Ministry of Defence
38) Seminar
Venue
Date
Organiser
: Education Symposium
: Persada Johor, Johor Bahru
: 5-6/12/2006
: HRD & CTL, UTM
39) Conference: Asia Design Network Conference
Venue
: MATRADE Exhibition & Convention Center, Kuala Lumpur
Date
: 30-31 October 2007
Organiser : Organised by Malaysia Design Council & Asia Design Network.
40) Conference: 2nd Regional Conference on Engineering Education RCEE 2007
Vanue
: Persada Johor, Johor bahru, Johor
Date
: 3rd – 5th December 2007
Organiser : Organised by Universiti Teknologi Malaysia, Institute of Engineers
Malaysia & Council of Engineering Deans Malaysia
41) Conference: International Conference of Applied and Creative Arts (ICACA 2008)
Venue
: Faculty of Applied Arts & Design
Date
: 16- 17 January 2008
Organiser : Organised by Universiti Malaysia Sarawak (UNIMAS), Kuching,
44
42) Workshop : Review of Generic Skills Assessment FME
Venue
: Faculty of Mechanical Engineering
Date
: 27 February 2008
Organiser : Faculty of Mechanical Engineering, Universiti Teknologi Malaysia
43) Conference: International Furniture Conference and Exhibition
Venue
: PUTRA World trade Center, Kuala Lumpur
Date
: 28-30 July 2008
Organiser : Organised by Universiti Teknologi MARA (Kelantan Branch)
44) Workshop : Learning Assessment System Reviewing Workshop
Venue
: Klana Resort, Seremban, Negeri Sembilan
Date
: 31st Oct – 2nd November 2008
Organiser : Centre for Teaching & Learning (CTL) , Universiti Teknologi Malaysia
45) Workshop : Academic Programme Assessment Review Workshop
Venue
: Crown Princess Hotel, Kuala Lumpur
Date
: 28-30 November 2008
Organiser : Centre for Teaching & Learning (CTL), Universiti Teknologi Malaysia
46) Workshop : Internal Audit Assessment For Faculty of Chemical Eng. & Natural
Resources Engineering Workshop
Venue
: Pulai Spring Resort, Johor Bahru
Date
: 13-15 January 2009
Organiser : Centre for Teaching & Learning (CTL), Universiti Teknologi Malaysia
47) Workshop : Programme Objective & Programme Learning Outcome Mapping
Workshop
Venue
: Sofitel Palm Resort, Johor Bahru
Date
: 17-18 February 2009
Organiser : Centre for Teaching & Learning (CTL), Universiti Teknologi Malaysia
48) Workshop : Internal Audit Assessment For Faculty of Electrical Engineering
Workshop
Venue
: UTM, Johor Bahru
Date
: 25th May 2009
Organiser : Centre for Teaching & Learning (CTL), Universiti Teknologi Malaysia
49) Workshop : Malaysia Qualification Agency – Accreditation Workshop (MQA)
Venue
: Hotel Seri Pacific, Kl
Date
: 4-6th August 2009
Organiser : Malaysia Qualification Agency
50) Workshop : Bengkel Jaminan Kualiti MQA- Latihan Kod Amalan Utk Akreditasi
Program (COPPA)
Venue
: Mines Wellness Hotel. Sg Besi.
Date
: 22-23rd November 2009
45
Organiser : Malaysia Qualification Agency
51) Workshop : Bengkel Mapping PO & PLO,
Venue
: M-Suite Hotel, JB
Date
: 17-18th February 2009
Organiser : UTM
52) Workshop : Bengkel Semakan OBE, FKM,
Venue
: Coral Paradise Resort Port Dickson
Date
: 15-17th June 2009
53) Workshop : Bengkel APA, anjuran Unit Kualiti di KTC,
Venue
: UTM
Date
: 18 th November 2009
54) Seminar : Seminar Pegawai Memerintah Askar Wataniah,
Venue
: BPS, MINDEF, KL
Date
: 11-13th August 2009
Organiser : Bahagian Pasukan Simpanan, Ministry of Defence
55) Seminar : Konvensyen PIBG peringkat Negeri Johor
Venue
: Hotel Selesa, Johor Bahru
Date
: 13-14th Mac 2010)
Organiser : Jabatan Pendidikan Negeri Johor
56) Workshop : Bengkel Penyemakan Program SRI (Prog 3 Thn) organised by Razak
School of Manufacturing & Advanced Technology, UTM
Venue
: M-Suite Hotel, Johor Bahru
Date
: 15-17th October 2010
Organiser : UTM
57) Workshop : Industrial PHD Supervisors Training Programme, organised by MDPS
& MOHE
Venue
: Pulai Spring Resort
Date
: 27-29th July 2011
Organiser : UTM
58) Workshop : Bengkel Pengemaskinian Silibus Program Ijazah & Diploma Rekabentuk
Peridustrian.
Venue
: Grand Continent Hotel, Kuala Terengganu.
Date
: 11-13th July 2011
Organiser : Razak School of Manufacturing & Advanced Technology, UTM
59) Workshop : Bengkel Program Kecemerlangan Sekolah Kluster Ministry of
Education and Ministry of Higher Education
Venue
: Hotel Selesa, Johor Bahru
46
Date
: 12th December 2011
Organiser : Ministry of Education and Ministry of Higher Education
60) Seminar : Seminar Pegawai Memerintah Askar Wataniah,
Venue
: Regiment 509 Territorial Army, Penang.
Date
: 18-20 March 2011
Organiser : Bahagian Pasukan Simpanan, Ministry of Defence
61) Seminar : Seminar Pegawai Memerintah Askar Wataniah,
Venue
: Pusat Latihan Pengaman PBB, Kem Segenting, Port Dickson.
Date
: 16-18th November 2012
Organiser : Bahagian Pasukan Simpanan, Ministry of Defence
11.2 Courses Attended
1) Course
Venue
Date
Organiser
: Lecturer‟s Course
: UTM, Jalan Semarak
: July 1987 (1 semester)
: Training Unit, UTM
2) Course
Venue
Date
Organiser
: Quantitative and Qualitative For SLAB
: University of Malaya
: 20th May - 29th June 1991
: Department of Civil Services (JPA)
3) Course
Venue
Date
Organiser
: Company Weapon for Territorial Army (TA) Officers
: Cadet Training School, Sebatang Karah, Port Dickson
: May – June 1983 (1 month)
: Territorial Army Directorate, Ministry of Mefence
4) Course
Venue
Date
Organiser
: Tactic Course for Young Officers
: Cadet Training School, Sebatang Karah, Port Dickson
: June – July 1984 (1 month)
: Territorial Army Directorate, Ministry of Defence
5) Course
Venue
Date
Organiser
: Junior Staff Officer Course (Part 1)
: Territorial Army Training Center, Ipoh, Perak
: November – December 1986 (1 month)
: Territorial Army Directorate, Ministry of Defence
6) Course
Venue
Date
Organiser
: Junior Staff Officer Course
: Territorial Army Training Center, Ipoh, Perak
: November- December 1989 (1 month)
: Territorial Army Directorate, Ministry of Defence
47
7) Course
Venue
Date
Organiser
: Company Commander Course
: Territorial Army Training Center, Ipoh, Perak
: October – Novembr 1995 (1 month)
: Territorial Army Directorate, Ministry of Defence
8) Course
Venue
Date
Organiser
: Student Advisor
: Pulai Springs Golf Resort, Johor
: 25th – 26th June 1996
: Mechanical Engineering Faculty, UTM
9) Course
Venue
Date
Organiser
: Invention and Design Basic
: Hotel Seri Malaysia, Johor
: 28th –30th October 1996
: Ministry of Education
10) Course
Venue
Date
Organiser
: Design Lecture
: Menara Tan & Tan, Kuala Lumpur
: 28th – 30th January 1997
: Malaysia Design Council
11) Course
Venue
Date
Organiser
: Multimedia in Education
: Faculty of Education, UTM, Skudai.
: 21st - 22nd April 1999
: Human Resources Development Unit, UTM
12) Course
Venue
Date
Organiser
: Effective Supervision for Post Graduate Students
: Dewan Jumaah, UTM, Skudai.
: 9th – 10th June 1999
: Human Resources Development Unit, UTM.
13) Course
Venue
: Typesetting Documents with LATEX in Widows
: Computer Laboratory, Faculty of Mechanical Engineering, UTM,
Skudai.
Date
: 26th April 2000
Organiser : Information Technology Management & Computer Lab FME
14) Course
Venue
Date
Organiser
: Workshop & Strategic Planning
: Desaru Golden Beach Hotel, Desaru, Johor.
: 17th - 19th November 2000
: Gas Technology Research Group (GASTEG) FKKKSA, UTM, Skudai.
15) Course
Venue
Date
Organiser
: Workshop & Strategic Planning
: Hotel Seri Malaysia, Genting Highland.
: 20th-22nd January 2000
: Mechnanical Engineering Faculty, UTM, Skudai.
48
16) Course
Venue
Date
Organiser
: Workshop & Strategic Planning
: Hotel Seri Malaysia, Genting Highland.
: 3rd – 5th February 2001
: Mechnanical Engineering Faculty, UTM, Skudai.
17) Course
Venue
Date
Organiser
: Managing Change
: Holiday Inn Crowne Plaza, Johor Bahru, Johor.
: 8th – 10th May 2001
: Human Resources Department, Chancellery, UTM
18) Course
Venue
: Project Management and Control.
: Business and Advanced Technology Center (BATC), UTM, Kuala
Lumpur.
Date
: 18th – 20th June 2001
Organiser : Human Resources Department, Chancellery, UTM
19) Course
Venue
Date
Organiser
: Academic Supervision
: Starhill Golf Resort Kempas, Johor Bahru, Johor
: 13th-14th June 2001
: Human Resources Department, Chancellery, UTM
20) Course
Venue
Date
Organiser
: Managing Stress
: Hyatt Hotel, Johor Bahru, Johor
: 21st – 22nd June 2001
: Human Resources Department, Chancellery, UTM
21) Course
Venue
Date
Organiser
: Stratagic Planning Workshop
: Century Hotel, Melaka
: 6th-8th July 2001
: Vice Chancellor Academic Office, UTM
22) Course
Venue
Date
Organiser
: Corporate Management Course
: Hyatt Hotel, Johor Bahru, Johor
: 27th – 28th August 2001
: Human Resources Department, Chancellery, UTM
23) Course
Venue
Date
Organiser
: Workshop on SKT Assesment
: Goodhope Hotel, Skudai, Johor Bahru, Johor
: 4th September 2001
: Human Resources Department, Chancellery, UTM
24) Course
: Forum/Dialog on “Design” for Institution of Higher Learning and
Industries.
: Concorde Hotel Shah Alam, Selangor
Venue
49
Date
: 1st October 2001
Organiser : Malaysia Design Council.
25) Course
Venue
Date
Organiser
: E-Learning
: Computer Center UTM Block N25
: 31st August – 1st November 2001
: Human Resources Department and Design dept, FME, UTM
26) Course
Venue
Date
Organiser
: Original Writing for Publication
: Sofitel Hotel, Senai, Johor
: 5th-7th February 2002
: Human Resourced Development, UTM
27) Course
Venue
Date
Organiser
: E-Learning
: Computer Center UTM Block N25
: 16th- 17th January 2002
: Human Resources Developmenyt Unit and Design /Dept, FME, UTM
28) Course
Venue
Date
Organiser
: Counseling Method in Organisation
: Sofitel Hotel, Senai, Johor.
: 26th- 27th March 2002
: Human Resources Development Unit, UTM
29) Course
Venue
Date
Organiser
: Biro Tata Negara
: Kem Bina Negara, Meru, Klang, Selangor
: 25th – 29th May 2002
: Biro Tata Negara, Ministers‟ Department, Putrajaya.
30) Course
Venue
Date
Organiser
: Self Excellence and Organisation
: Corus Resort , Port Dickson
: 23rd – 26th June 2002
: Human Resources Development Unit, UTM
31) Course
Venue
Date
Organiser
: Workshop on Introduction to Accreditation
: Pan Pacific Hotel, Johor Bahru
: 30th January 2003
: National Board of Accreditation Malaysia
32) Course
Venue
Date
Organiser
: Introduction to ISO 9000 : 2000
: Hotel Seri Costa, Melaka
: 17th-18th February 2003
: Faculty of Mechanical Engineering, UTM.
33) Course
Venue
Date
:Workshop on Quality Assurance
: Allson Kelana Resort, Seremban
: 15th-18th October 2003
50
Organiser : Faculty of Mechanical Engineering, UTM.
34) Course
Venue
Date
Organiser
: Proof Reading
: Sofitel Golf Resort, Senai, Johor
: 10th-12th March 2004
: Publishing Unit & UNIPEN, UTM.
35) Course
Venue
Date
Organiser
: Proficiency Level Course (PTK 6)
: Post Graduate Center, UTM Skudai.
: 12th-28th April 2004
: Teaching & Learning Unit (UNIPEN) UTM
36) Course
Venue
Date
Organiser
: "Generic Skill”
: Rumah Alumni UTM
: (9-11/8/2004
: UNIPEN/HRD UTM)
37) Course
Venue
Date
Organiser
: Emotional Intelligence (EI)
: Awana Genting Golf Resort, Genting Highland, Pahang
: 11th-14th May 2004
: Army Training Headquarters (Intelligent Section), Ministry of Defence.
38) Course
Venue
Date
Organiser
: Workshop – Updating L2 Subjects
: Dewan Seminar, FME
: 27th January 2005
: FME, UTM
39) Course
Venue
Date
Organiser
: Mengurus Pekerja Bermasalah “Managing Problematic Staff”
: Grand Blue Wave Hotel, Johor Bahru
: 15-16 February 2005
: Human Resources Development Unit, UTM
40) Course
Venue
Date
Organiser
: E-Learning Workshop
: Dewan Seminar, FME
: 2nd March 2005
: FME, UTM
41) Course
Venue
Date
Organiser
: Alias-Wavefront (Alias Studio Tools) Course
: Computer Laboratory Block C23, FME
: 11th-15th March 2005
: FME, UTM STOP DI SINI 27 JUN
42) Course
Venue
Date
Organiser
: UTM‟s Programme Specification Pre-Workshop
: Sofitel palm Resort Senai
: 12th March 2005
: Human Resources Development Unit & Center for Teaching & Learning
51
(CTL), UTM.
43) Course
Venue
Date
Organiser
: UTM‟s Programme Specification Workshop
: Renaissance Hotel, Melacca.
: 6th-8th May 2005
: Human Resources Development Unit & Center for Teaching & Learning
(CTL), UTM.
44) Course
Venue
Date
Organiser
: Adult Learning
: Rumah Alumni
: 17th May 2005
: SPACE & Center for Teaching & Learning
(CTL), UTM.
45) Course
Venue
Date
Organiser
: Workshop on "Outcome-Based Education
: Rumah Alumni
: 14-15/12/2005
: FKKKSA, UTM
46) Course
Venue
Date
Organiser
: Workshop on "PEMANTAPAN PENILAIAN DOKUMEN LAN"
: Mutiara Hotel , Johor Bahru
: 27-29/9/2005
: National Acreditation Board
47) Course
Venue
Date
Organiser
: Terrotorial Army Anniversary Dialog,
: Universiti Kebangsaan Malaysia
: 19-21/7/2005
: Ministry of Defence
48) Course : “Space Management”
Venue : Mahkota Hotel, Melaka
Date
: 3-5/2/2006
Organiser : Property Office, UTM
49) Course : "Strategic Planning"
Venue : Tanjung Balau, Desaru
Date
: 24-26/2/2006
Organiser : FME
50) Course
: Active Learning & Co-opperative Learning"
Venue : Pulai Spring Resort, Johor Bahru
Date
: 25-26/4/2006
Organiser : CTL/HRD UTM
51) Course
Venue
: "Outcome- based Education”
: FME Seminar Hall
52
Date
: 18-19/3/2006
Organiser : FME
52) Course
: "Academic advisery"
Venue
: FME Seminar Hall
Date
: 30/8/2006
Organiser : FME
53) Course
: "Problem-based Learning"
Venue : Puteri Pan Hotel, Johor Bahru
Date
: 20-21/9/2006
Organiser : HRD & CTL
54) Course : "Programme Specification”
Venue : Mahkota Hotel, Melaka
Date
: 10-12/11/2006
Organiser : , HRD & CTL UTM,
55) Course
: "Student‟s Portfolio"
Venue : Mahkota Hotel, Melaka
Date
: 15-17/10/2006
Organiser : CTL & HRD, UTM
56) Course : "Academic Auditing”
Venue : Hyatt Hotel, Johor Bahru
Date
: 26-28/11/2006
Organiser : CTL UTM
57) Course
: Pemantapan Kertas Kerja Program B.ENG. Tech (Industrial Design
UniKL.
Venue : Water City Hotel Air Keroh, Melaka
Date
: 4-16/12/2006)
Organiser: Faculty of Manufacturing Technology, Universiti Kuala Lumpur
(UniKL)
58) Course
Venue
Date
Organiser
: Senior Command Course
: Territorial Army Training Center, Ipoh, Perak
: 29 September – 11 October 2007 (2 weeks)
: Territorial Army Directorate, Ministry of Defence
: Workshop “Pengemaskinian Silibus Ijazah & Diploma Rekabentuk
Perindustrian (External Panel)
Venue
: Grand Continental, Kuala Terengganu.
Date
: 11-13 July 2011
Organiser : Universiti Sultan Zainal Abidin (UNISZA)
59) Course
53
60) Course
Venue
Date
Organiser
: Workshop “Industrial PHD Supervisors Training Programme”
: Pulai Spring Resort
: 27-29 July 2011
: MDPS & KPT
: Workshop “Bengkel Program Kecemerlangan Sekolah Kluster KPM dan
KPT
Venue
: Hotel Selesa, Johor Bahru
Date
: 12 December 2011
Organiser : Kementerian Pendidikan Malaysia.
61) Course
62) Course
: OBE Course- On-line Course Review Report & Programme Review
Report.
Venue
: Computer Laboratory, Center for Teaching & Learning, UTM
Date
: 6th July 2012
Organiser : Center for Teaching & Learning, UTM
: Workshop “Pengemaskinian Silibus Ijazah & Diploma Rekabentuk
Perindustrian” (External Panel)
Venue
: Grand Continental, Kuala Terengganu.
Date
: 18-20 June 2013
Organiser : Universiti Sultan Zainal Abidin (UNISZA)
63) Course
12. PROJECT AND RESEARCH
a)
A Mechanised Sprayer for Tobacco Cultivation in Malaysia
Research
: Master Degree Project
Duration
: September 1984 – June 1986
Venue
: Manchester Polytechnic, Manchester, United Kingdom
Scope
: Problem definition, design criteria, design specification, design
concept, proposed design, engineering drawing, presentation
drawing, model and report-cum-thesis.
54
b)
c)
d)
e)
Vacuum Packaging Machine
Position
: Project leader
Duration
: July 1989 - December 1990
Venue
: University Technology Malaysia
Fund
: Research & Consultancy Unit, UTM (RM5,000)
Scope
: Market survey, problem definition, design criteria, design
specification, design concept, proposed design, production
drawing, prototyping of the final design.
Assault Boat Trailer Design
Position
: Researcher/ Designer (under GRP Assault Boat design Group)
Duration
: January 1991 – September 1991
Venue
: University Technology Malaysia
Scope
: Design concept, proposed design, engineering drawing.
The Potential Contribution of Industrial Design to the Adaptation of Agricultural
Machinery for use in Malaysia
Research
: Ph.D Project
Duration
: November 1991 – March 1995
Venue
: The Manchester Metropolitan University, Manchester, United
Kingdom
Scope
: Problem statement, Literature review, Field study, Case study,
Sample studies Statistical analyses (SPSS PC+) Theoretical
analyses and findings, Recommendations
Design and Fabrication of a Super-kart F1
Position
: Project Leader
55
f)
g)
Duration
: August 1996 – December 1998
Venue
: University Technology Malaysia
Fund
: Research & Consultancy Unit, UTM
Scope
: Market research, problem definition, design criteria, design
specification, design concept, proposed design, production
drawing, prototyping and testing of the final design.
Mobile Field Kitchen Design
Position
: Project Leader
Duration
: March 1998 – March 1999
Venue
: University Technology Malaysia
Fund
: Management Budget/ PALAPES, UTM
Scope
: Field Study, problem definition, design criteria, design
specification, design concept, proposed design, production
drawing, prototyping and testing of the final design and
submission for Malaysia Army TQM Competition.
Catamaran Sailing Boat Design
Position
: Project Leader
Duration
: March 1998 – March 1999
Venue
: University Technology Malaysia
Fund
: Management Budget/ PALAPES, UTM
Scope
: Field Study, problem definition, design criteria, design
specification, design concept, proposed design, production
drawing, prototyping and testing of the final design and
submission for Malaysia Army TQM Competition.
56
13. CONSULTANCY
a) Project
Duration
: Speed Boat Design (under Marine Research Group)
: Started 1997
Company : Diversified Marine Services (DMS), Pasir Gudang, Johor.
Scope
b) Project
Duration
: Design concept, presentation drawing.
: a) Washing Machine for „Pegaga‟ (centella asiatica) herbs
: b) Grinding Machine for „Pegaga‟ (centella asiatica) herbs
: c) Pressing Machine for „Pegaga‟ (centella asiatica) herbs
: Started September 1998
Company : Syarikat Perniagaan Orang Kampung Sdn. Bhd.
Scope
c) Project
: Groundwork study, Design concept, Engineering drawing, Prototying
And Testing.
: Telephone Booth Design
Duration
: Started Oct 1999
Company
: Payphone Sdn Bhd
Scope
: Design Concept
d) Project
: Bean Sprout Processing Machine Design
Duration
: Julai - November 2001
Company
: Bean Stalk Sdn Bhd, Pekan Nenas, Johor
Scope
: Design Concept
57
e) Project
: Multi Media Trolley Design
Duration
: January 2003
Company
: Gading Kencana Sdn Bhd, Subang Jaya, Selangor
Scope
: Design Concept
14. PUBLICATIONS
14.1 Books
1. Industrial Design Glossary, Dewan Bahasa & Pustaka (DBP), Kuala Lumpur,
ISBN 983-62-3767-41, 1993
2. Encyclopedia of Science and Engineering, Word entry for “Industrial Design” field,
Dewan Bahasa & Pustaka (DBP), Kuala Lumpur (1999)
3. Warkah Anak Merdeka, Antologi Puisi Kemerdekaan dan Petriotisma, (sumbangan 2
buah puisi – ”Patrotisma Jiwa Merdeka & ”Semarak Merdeka”) Penerbit UTM,
(2007)
4. Buletin of The Mechanical Colloqium, Faculty of Mechanical Engineering, UTM
Vol.4 No.1 July 2007 – ”Physical Facilities for Industrial Design Programme to
Achieve Generic Skills”
14.2 National Papers
1. Dzulkifli Awang (1996) Design Challenge in Future, Seminar on Rakan Muda Rakan
Rekacipta, Johor State Level, UTM, Organiser by UTM, MINDS and Ministry of
Science and Environment, 16th January 1996 (presenter)
2. Dzulkifli Awang (1996) Invention, Design and Industrial Designers, Technology and
Innovation in Education Course, Johor Bahru, Johor, Organiser by Faculty Of
Education, UTM and Johor District Education Office, 29th-30th October 1996
(presenter)
3. Dzulkifli Awang (1996) Design Development of Mobile Field Kitchen, Arm Forces
58
TQM /Innovation Project, Organiser by PALAPES UTM, UTM, Johor. (1996)
(presenter)
4. Dzulkifli Awang (1996) Design and Industrial Design, Mechanical Engineering
Faculty Colloquium, Organiser by MECH. ENG. FACULTY (1996) (presenter)
5. Dzulkifli Awang (1996) Catamaran Sailing Boat Design for ROTU (marine officers
cadet), UTM, Organiser by PALAPES UTM (1996) (presenter)
6. Dzulkifli Awang & Kamal Azam Bani Hashim (1998) Study Opportunities for
Design & Invention Subjects in Institutions of Higher Learning, Organiser by
Curriculum Development Center, Ministry of Education, Jalan Duta, Kuala Lumpur
14th Oct 1998 (presenter)
7. Dzulkifli Awang (1998) Pendidikan Lanjutan Rekabentuk di IPT , Seminar on Rakan
Muda Rakan Rekacipta, Johor State Level, UTM, Organiser by UTM, MINDS and
Ministry of Science and Environment, 16th January 1998 (presenter)
8. Dzulkifli Awang (1999) Pendidikan Reka Cipta, Workshop on Rakan Muda Rakan
Rekacipta, Johor State Level, UTM, Organiser by Pusat Rekacipta UTM and Johor
State Education, 22nd May 1999 (presenter)
9. Dzulkifli Awang (1999) Design Development of Mobile Field Kitchen, Arm Forces
TQM/Innovation Project, Organiser by Markas Tentera Darat, Ministry of Defence,
Jalan Padang Tembak, Kuala Lumpur, 31st December 1999 (prersenter)
10. Dzulkifli Awang and Kamal Azam Bani Hashim (2000) Reka Cipta - Suatu
Keperluan?, Workshop on Rakan Muda/Rakan Rekacipta, in conjunction with
Minggu Penggalakan Sains dan Teknologi Johor, Organiser by Pusat Rekacipta UTM
and Ministry of Science, Technology & Environment Johor, University Technology
Malaysia, Skudai, Johor 9th - 11th November 2000 (joined paper)
11. Dzulkifli Awang (2001) Role and Contribution of Industrial Design in Small Industry
Product, at City Bayview Hotel, Langkawi, Organiser by School of Business
Management, University Utara Malayia, 8th-9th September 2001.
12. Dzulkifli Awang (2003) Malaysia Design Conference: Industrial Design Curriculum
in Universiti Teknologi Malaysia, Malaysia Design Conference & Exhibition, Putera
World Trade Center, Kuala Lumpur, Organiser by Malaysia Design Council (MDC)
8th-10th October 2003 (presenter).
13. Dzulkifli Awang (2003) Industrial Design in Engineering Curricullum, Conference on
Engineering Education, Renaissance Hotel, Kuala Lumpur, Organiser by School of
Professional and Continuous Education (SPACE) UTM, Institute of Engineers
Malaysia and Malaysian Council of Engineering Deans (MCED), 14-15th December
2004. (presenter)
59
14. Dzulkifli Awang (2005) Industrial Design in Mechanical Engineering Curricullum in
UTM and the Emergence of a new course - Bachelor Science Industrial Design ,
National Conference on Skills & Competencies in Education, Organiser by School of
Humanities, Universiti Sains Malaysia, 29-30th November 2005. (presenter)
15. Dzulkifli Awang (2007) Comparison Between “Project-Oriented Learning and
Problem-based Learning (PBL) in Design Subjects; 2nd Regional Conference on
Engineering Education RCEE 2007, Persada Johor, Johor bahru, Johor, Organiser by
Universiti Teknologi Malaysia, Institute of Engineers Malaysia & Council of
Engineering Deans Malaysia; 3rd – 5th December 2007 (presenter).
14.3
International Papers:
1. Dzulkifli Awang (2000) Malaysia Design: Culture, Identity and Globalisation, Asia
Pacific Design Conference & Exhibition, Putera World Trade Center, Kuala Lumpur,
Organiser by Malaysia Design Council (MDC) and Japan Design Foundation (JDF)
10th-12th October 2000 (presenter).
2. Dzulkifli Awang (2001) Design Made in Malaysia, Design Scene No: 52, Japan
Design Foundation (JDF) Osaka, Japan.
3. Dzulkifli Awang (2001) Design Education for the New Millennium, 5th Asian Design
Conference and Design Symposium, at Seoul National University, South Korea,
Organiser by Korean Advance Institute of Science & Technology (KAIST), Japan
Design Foundation (JDF) China Design Foundation., 11th – 13th October 2001.
4. Dzulkifli Awang (2007) Developing Design Curricullum for the Changing Design
Environment, Asia Design Network Conference, Organiser by Malaysia Design
Council & Asia Design Network, MATRADE Exhibition & Convention Center,
Kuala Lumpur, 30-31 October 2007
5. Dzulkifli Awang (2008) Sketching & Drawing – An Aid to Creativity in Design, 2nd
International Conference of Applied and Creative Arts (ICACA 2008), Organiser by
Universiti Malaysia Sarawak (UNIMAS), Kuching, 16- 17 January 2008
6. Dzulkifli Awang (2008) Furniture Design – Research Based on Design Considerations
and Concepts of Aesthetics, International Furniture Conference and Exhibition,
PUTRA World trade Center, Kuala Lumpur, Organiser by Universiti Teknologi
MARA (Kelantan Branch) 28-30 July 2008 (presenter)
60
14.4
Working Papers
1. Formation of a new course – Bachelor of Science Industrial Design in University
Technology Malaysia – submitted to Senate and Ministry of Education (1996)
2. Syllabus Draft - “Introduction to Design” (SMJ 2513) Subject for
Mechanical Engineering 4 years course. (1998)
Degree in
3. Formation of a new faculty – Faculty of Design & Technology in University
Technology Malaysia – submitted to Senate and Ministry of Education (2003)
4. Formation of a new course – Master of Science Industrial Design in University
Technology Malaysia – submitted to Senate and Ministry of Education (2007)
5. New Curriculum Development – 3 Year‟s Curriculum (120 credits) - for Bachelor of
Science Industrial Design in University Technology Malaysia - submitted to Senate
and Ministry of Education (April 2007)
6. New Curriculum Development – 3 Year‟s Curriculum (109 credits) - for Bachelor of
Science Industrial Design in University Technology Malaysia - submitted to Senate
and Ministry of Education (April 2007)
14.4
Lecture Modules
1. Dzulkifli Awang (1996) Industrial Design, 1st Edition, Faculty of Mechanical
Engineering, UTM.
2. Dzulkifli Awang (1995) Industrial Design, 2nd Edition, Faculty of Mechanical
Engineering, UTM.
3. Dzulkifli Awang (2006) Studio Presentation (SRI 1032) Dept. of Design Faculty of
Mechanical Engineering, UTM
4. Dzulkifli Awang (2006) Sketching/Drawing (SRI 1012) Dept. of Design Faculty of
Mechanical Engineering, UTM
5. Dzulkifli Awang (2007) Innovation Management & New Product Development (SRI
2083) Dept. of Design Faculty of Mechanical Engineering, UTM
61
15. EXTRA-CURRICULAR ACTIVITIES
15.1
Organisation
1) Reserve Officer Training Unit (ROTU/PALAPES)
Rank
: Cadet Sergeant
Position
: Platoon Sergeant
Service
: July 1980 – June 1981
Unit
: ROTU, MARA Institute of Technology, Shah Alam
2) Reserve Officer Training Unit (ROTU/PALAPES)
Rank
: Cadet Staff Sergeant
Position
: Company Quartermaster
Service
: July 1981 – June 1982
Unit
: ROTU, MARA Institute of Technology, Shah Alam
3) Reserve Officer Training Unit (ROTU/PALAPES)
Rank
: Senior Under Officer (SUO)
Position
: Detachment Commander
Service
: July 1982 – April 1983
Unit
: ROTU, MARA Institute of Technology, Shah Alam
4) Territorial Army (TA)
Rank
: 2nd Lieutenant
Position
: Platoon Commander
Service
: 4 years (1983 – 1987)
Unit
: 1st Battalion, Regiment 502 (TA), Ampang Camp, Kuala Lumpur
5) Territorial Army (TA)
Rank
: Lieutenant
Position
: Platoon Commander
Service
: 4 years (1987 - 1991)
Unit
: 1st Battalion, Regiment 502 (TA), Ampang Camp, Kuala Lumpur
1st Battalion, Regiment 501 (TA), Majidee Camp, Johor Bahru, Johor
6) Territorial Army (TA)
Rank
: Captain
Position
: Assistant Company Commander
Service
: 2 years (1991 – 1996)
Unit
: 1st Battalion, Regiment 501 (TA), Tebrau Camp, Tebrau, Johor Bahru,
Johor.
62
7) Territorial Army (TA)
Rank
: Major
Position
: Company Commander
Service
: April 1995 – April 1996
Unit
: 1st Battalion, Regiment 502 (TA), Tebrau Camp, Tebrau, Johor Bahru,
Johor.
8) Territorial Army (TA)
Rank
: Major
Position : Attachment Staff Officer
Service
: May 1996 – July 1997)
Unit
: Reserve Officers Training Unit (ROTU/PALAPES) University
Technology Malaysia, Johor
9) Territorial Army (TA)
Rank
: Major
Position : Company Commander
Service
: August 1997 – August 1998
Unit
: 1st Battalion, Regiment 502 (TA), Tebrau Camp, Tebrau, Johor Bahru,
Johor.
10) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Commanding Officer
Service : September 1998 - present
Unit
: 2nd Battalion, Regiment 502 (TA), Muar Camp, Muar, Johor.
11) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Permanent Secretary for Commanding Officers' Meeting
Service : November 1998 - present
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
12) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Administration Exco for Territorial Commander‟s Conference 2000
Service : Organising committee (May - August 2000)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
13) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for TA's 43rd Anniversary parade at Ipoh Stadium
(5th- 10th/6/2000)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
63
14) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Standby Parade Commander
Service : Standby Parade Commander for TA's 44th Anniversary parade at
Stadium Sultan Ahmad Shah, Kuantan, Pahang (28th June – 1st July
2001)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
15) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Regiment 501 (TA) 2004 Annual Camp Opening
Ceremony Parade (30th /9 - 15th/10/2003)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
16) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Regiment 501 (TA) 2004 Training Opening
Ceremony Parade (12th- 16th/1/2004)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
17) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Regiment 501 (TA) 2004 Training Opening
Ceremony Parade (16th March 2005)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
18) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Rank Investure Jawatankuasa Pendokong Askar
Wataniah Johor Ceremony Parade at Dataran Bandaraya, Johor Bahru,
Johor. (31st May, 2005)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
19) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for The Launching Parade of “Kompeni Perdana”
Johor State Level at Dataran Bandaraya, Johor Bahru, Johor.
23/11/2007)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
64
20) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Regiment 501 (TA) Training Opening
Ceremony Parade (11-17/3/2008)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
21) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Regiment 501 (TA) Training Opening
Ceremony Parade (13-15/2/2009)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
22) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for JAKPAW Shooting Competition Closing
Ceremony Parade, PULADA Shooting Range (7/11/2010)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
23) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Annual Camp 2010 Closing Ceremony (Mersing
Camp - 12/11/2010)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
24) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Regiment 501 (TA) Training Opening
Ceremony Parade (9/1/2011)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
25) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Parade Commander
Service : Parade Commander for Regiment 501 (TA) Training Opening
Ceremony Parade (22/1/2012)
Unit
: Regiment 502 (TA), Tebrau Camp, Tebrau, Johor.
65
23) Territorial Army (TA)
Rank
: Lieutenant Colonel
Position : Commanding Officer for 3rd Battalion
Service : Mei 2008 - present
Unit
: 3rd Battalion, Regiment 502 (TA), Kluang Camp, Kluang, Johor.
P/S : for further detail on my involvement and contributions in TA, please refer to
attached Biodata for TA.
15.2 Community Services
1) UMNO Committee (Auditor), Taman Sri Andalas UMNO Branch, Ulu Klang,
Selangor (1986)
Contribution/service
: Social welfare of the branch community, up-keeping
surau AU4, gotong-royong.
2) Industrial Design Department, School of Art & Design, MARA Institute of
Technology, Shah Alam (1987 – 1989)
Contribution/service
: Part-time Lecturing
3) MCCH (Malaysian Community of Cheetham Hill) Committee, Manchester, U.K.
(1993 – 1994)
Contribution/service
: Malaysian students welfare – organising social and
Religious activities, housing, etc
4) Belibis/Undan Surau Construction Committee (1997 – present)
Contribution/service
: Committee formed to Organiser the construction of a
surau for the benefits of the locals
5) AARG (Automotive and Aeronautical Research & development Group), Mechanical
Engineering UTM (1996-1997)
Contribution/service
: Participation in exhibition, video recording requested by
66
schools, video recording firms, sports Organisers, local
authorities.
6)
Bandar Tenggara Secondary School, Bandar, Tenggara, Kulai Johor (1997)
Contribution/service
7)
British Petroleum (BP), TV3 and Ministry of Education (1997)
Contribution/service
8)
: Judging Panel for “BP Challenge” Semi-final held at
Plentong BP Station, Johor (13th September 1997)
British Petroleum (BP), TV3 and Ministry of Education (1997)
Contribution/service
9)
: Design talks for Design Motivation Course
(4th November 1997)
: Judging Panel for “BP Challenge” Final held at Education
Auditorium, Ministry of Education, Bukit Kiara, Kuala
Lumpur (22nd October 1997)
Bahagian Kemahiran MARA, Kuala Lumpur (1998)
Contribution/service
: Judging Panel (Head of Judge) for IKM Design
Competition held at IKM, Sungai Petani, Kedah (14-15
August 1998)
10) School of Professional and Continuing Education (SPACE) (1995, 1996, 1997
1998)
Contribution/service
: Lecturing in Industrial Design subject (SMM 3512) and
Product Design (SMM 5523)
11) Sek. Men. Rendah Taman Universiti (1999)
Contribution/service
: Design Talks on Industrial Design (7/1/99)
12) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (April 1999
– May 2000)
Contribution/service
: Committee Member
67
13) Sek. Men . Seri Perling, Taman Perling, Surau Building Committee (April 1999 –
May 2000)
Contribution/service
: Committee Member - Surau design and fund collection .
14) Kolej Islam YPJ, Johor (Oct 1999)
Contribution/service
: Talks on "Penghayatan Kemerdekaan"
15) Education Technology Department, Ministry of Education, Bukit Kiara and RTM2
(Oct 1999)
Contribution/service
: Panel for "Bicara" live telecast educational
program
16) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (April 2000
– May 2001)
Contribution/service
: Committee Member
17) Sek. Men . Seri Perling, Taman Perling, Surau Building Committee (April 2000 –
May 2001)
Contribution/service
: Committee Member - Surau design and fund collection .
18) Sekolah Kebangsaan Taman Perling, Parent & Teachers Association (April 2000 –
2001)
Contribution/service
: Committee Member
19) Kolej Ugama Sultan Zainal Abidin (KUSZA), Kuala Terengganu, Terengganu
(February 2001)
Contribution/service
: Talks on “ Industrial Training” for Diploma in Industrial
Design‟s Students.
20) Kolej Siswa Desa Skudai, Universuti Teknologi Malaysia (19th May 2001)
68
Contribution/service:
: Talks on “ Student Orientation Week” for UTM‟s new
intake
21) Sek. Men . Seri Perling, Taman Perling, Surau Building Committee (April 2002 –
May 2003)
Contribution/service
: Committee Member - Surau design and fund collection .
22) Sekolah Kebangsaan Taman Perling, Parent & Teachers Association (April 2002 2003)
Contribution/service
: Committee Member
23) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (April 2002
– May 2003)
Contribution/service
: Committee Member
24) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (2002)
Contribution/service
: Design a Parents & Teachers Association Logo and
Letterhead
25) Bahagian Kemahiran MARA, Kuala Lumpur (2002)
Contribution/service
: Judging Panel for IKM Design
Competition held at IKM, Jasin, Melaka
(26-27 October 2002)
26) The University of Science of Malaysia, Changkat Minden, Penang (8 Mac, 2003)
Contribution/service
: Committee to discuss on Setting up a new course
“Bachelor of Fine Arts (Industrial Design)” for Art Study
Center (Pusat Pengajian Seni) USM
27) Sek. Men. Seri Perling, Taman Perling, Parents & Teachers Association (May 2003
– April 2004)
69
Contribution/service
: Chairman
28) Sek. Men . Seri Perling, Taman Perling, Johor
Contribution/service
: Talks on “ Industrial Design Education and Prospect” in
conjunction with Johor School Science Week (22 April,
3003)
29) The University of Science of Malaysia, Changkat Minden, Penang (17 July, 2003)
Contribution/service
: Committee to discuss on Setting up a new course
“Bachelor of Fine Arts (Industrial Design)” for Art Study
Center (Pusat Pengajian Seni) USM
30) Bahagian Kemahiran MARA, Kuala Lumpur (2003)
Contribution/service
: Judging Panel for IKM Design & Innovation
Competition held at Malaysian Institute of Aviation
Technology (MIAT), Sepang, Selangor
(4-5 October 2003)
31) Persidangan Kebangsaan Pengetu-Pengetua Sekolah Malaysia Johor Bahru (2004)
Contribution/service
: Forum Panel Members - Education Form “ Guru
Berkualiti Pemangkin Kegemilangan” organized by
Persidangan Kebangsaan Pengetu-Pengetua Sekolah
Malaysia Johor Bahru, at Islamic Center, Johor bahru,
Johor ( 26 June 2004)
32) Universiti Teknologi Tun Husien Onn, Batu Pahat (4th April 2007)
Contribution/Service
: Talks on “The Role of Patent in Design” in Conjunction
Of Faculy of Engineering Invention Day (Hari Reka
Cipta
33) Kolej Perdana, Universiti Teknologi Malaysia (19th May 2007)
Contribution/service
: Talks on “ Industrial Design – Education & Prospects” for
Secondary Schools in conjunction with Kolej Perdana‟s
70
Open Day.
34) Ceramah Rekabentuk/Rekacipta, Fakulti Pendidikan (11th Marc 2011)
Contribution/service
: Talks on “Industrial Design Course in Living Skills
Programme” organized by Faculty of Education, UTM
35) Ceramah Rekabentuk/Rekacipta, Fakulti Pendidikan (3rd April 2011)
Contribution/service
15.3
: Talks on “The Contributions of industrial Design in
organized by Faculty of Education, UTM
Sports
UTM‟ Sports Club
Hockey
Shooting
: Member (1986 – present)
: Represent Department and Faculty (1986 – 1987, 1989)
: Represent Regiment 502 (TA) in Rifle M16 Falling Plate
Competition (1987)
: Represent Regiment 502 (TA) in GPMG Group Shooting (1987)
: UTM in Pistol Shooting Competition held at UUM (1996)
: Represent ROTU, UTM in Pistol Shooting Competition held at
UPM (1996)
: Represent 1st Battalion in Rifle M16 Falling Plate Competition
(1998)
: Represent 2nd Battalion in Rifle M16 Falling Plate Competition
(1999)
: Represent 2nd Battalion in Pistol Falling Plate Competition
(1999)
: Represent Regiment 501 (TA) in Rifle M16 Falling Plate
Competition (2000)
: Represent Regiment 501 (TA) in Pistol Falling Plate Competition
held in Kuantan (2001)
: Represent Regiment 501 (TA) in Rifle M16 Falling Plate
Competition in Kuantan (2001)
: Represent Mechanical Engineering Faculty in Rifle M16 Falling
Plate Competition at UTM‟s Close Shooting Competition at
PULADA, Ulu Tiram, Johor (2003)
: Represent Mechanical Engineering Faculty in “Campus Run”
(veteran category) in conjunction with UTM‟s Family Day (2003)
: Represent Mechanical Engineering Faculty in Novelty Pistol
Competition at UTM‟s Close Shooting Competition at
PULADA, Ulu Tiram, Johor (2004)
71
: Represent Department (Copa Team) in Bowling Competition at
Skudai Parade (2004)
c) Archery
: Member - Archery Club, UTM (1997 – Present)
15.4 General Contributions
1. Official Neck Tie design for University Technology Malaysia (1988)
2. FME Manual and FME Bulletin Cover Design (1987, 1988, 1989, 1990, 1991)
3. Design and Fabrication of a FME‟s sign board at Block H, UTM, Jalan Gurney
(1987)
4. Brochure‟s Design for FME Degree and Diploma Course (1990)
5. Brochure‟s Design for FME/SPACE Degree and Diploma Course (1996)
6. Brochure‟s Design Bachelor of Science Industrial Design, FME (1997)
7. Participation in Technological Innovation Exhibition (ITEX‟96) at MBJB hall, Johor
Bahru (1996)
8. Judging Panel for Technological Design Competition Organized by PETERA (1998)
9. Interior Design for Proposed “FME‟s Example Lecture Room”, FME (1998)
10. Participation in Mechanical Engineering Faculty‟s Exhibition held at UTM‟s
Administration Building Foyer (1998)
11. Preparation of Teaching Materials for SMJ 2513 ( 1st Stage – Syllabus and
Scheduling) (1998)
12. Preparation of Teaching Materials for SMJ 2513 (2nd Stage – Subject Content)
(1999)
13. Preparation of Working Paper for SRI degree course recognition from JPA (1999)
14. Participation in INATEX 99 exhibition (1999)
15. Facalitator for Design Workshop Rakan Reka Cipta Johor (1999)
16. Head of Judging Panel for Design Competition in conjenction with Hari Inovasi 99
Organized by Student Union UTM (1999)
17. Participation in "Pasar Seni" Exhibition, Organiser by JETRO, Johor Bahru, Johor
(1999)
18. Participation in Science & Technology Week Exhibition Johor , Organiser by
Ministry of Science and Environment Johor and UTM (1999)
19. Participation in R&D Exhibition in conjunction with Prime Minister's Visit to UTM,
Organiser by Research Management Center UTM. (1999)
20. Chairman for PSM (Projek Sarjana Muda) Seminar (March, 1999)
21. Chairman for ATMA's PSM Seminar (March,1999)
22. Chairman for PSM (Projek Sarjana Muda) Seminar (April, 2000)
23. Chairman for PSM/SPACE Kulim Hi-Tech Seminar (May, 2000)
24. Chairman for FME Colloquium (17/7/2000, 13/9/200)
25. Chairman for PSM (Projek Sarjana Muda) Seminar (Nov, 2000)
26. Interviewer for B.Sc Industrial Design Candidates (new intake) (1997 - present)
27. Participant and talks for Markas Latihan Tentera Darat TQM presentation and
72
competition. (6th October 2000)
28. Organising Seminar on “RS Component” for FME‟s Staff and Students (11th July
2001)
29. Organising Seminar on “RS Component” for FME‟s Staff and Students (9th August
2002)
30. Participate in “Johor International Kite Festival” Pasir Gudang (April 2002)
31. Participate in exhibition undertaken by Kolej Siswa Desa Skudai at Teluk Intan,
Perak (Mei 2002)
32. Participate in exhibition for “Program Operasi Khidmat Rakan Masyarakat dan
Pendidikan undertaken by Persatuan Pengurusan Teknologi, UTM (October 2002)
33. Participate in Industrial Design Road Show at Sokolah Menengah Taman Universiti
in conjunction with the school “Co-Curriculum Day”(28 June 2003)
34. Participate in UTM‟s Courses Promotional Show and Talk at Sokolah Menengah
Teknik Perdagangan Johor Bahru, Johor. (10th April 2004)
35. Participate in Industrial Design Road Show at Seminar Hall, FME (21-23 July 2004)
36. Design of a Giant Hibiscus Balloon and Sculpture in conjunction with the 48th
“National Day” Month Celebration in UTM (2005)
16. HONOURS AND AWARDS
1) Dean‟s List Award (1980/81)
Department of Industrial Design, School of Art & Design
MARA Institute of Technology, Shah Alam, Selangor
Awarding Body
: MARA Institute of Technology, Shah Alam, Selangor
2) Dean‟s List Award (1982/83)
Department of Industrial Design, School of Art & Design
MARA Institute of Technology, Shah Alam, Selangor
Awarding Body
: MARA Institute of Technology, Shah Alam, Selangor
3) Best Student Award (1983)
School of Art & Design, MARA Institute of Technology, Shah Alam, Selangor
Awarding Body
: Federated Malaysian Manufacturers (FMM) and MARA
Institute of Technology
73
4) Best Student Award (1983)
Department of Industrial design, School of Art & Design, MARA Institute of
Technology, Shah Alam
Awarding Body
: Selangor Pewter Malaysia BHD and MARA Institute of
Technology
5) Civil Service Department Scholarship Award for Master‟s Degree (Skim Latihan
Akademik Bumiputra- SLAB) (1984)
Awarding Body
: Civil Service Department
6) Best Student Award (1986)
Master Degree Course (Master of Arts with Distinction), Industrial Design
Department, Manchester Polytechnic, Manchester, United Kingdom
Awarding Body
: Manchester Polytechnic, Manchester, United Kingdom
7) First Prize for Gate Design Competition (1982) for Perbadanan Kemajuan Pertanian
Selangor (PKPS)
Awarding Body
: Perbadanan Kemajuan Pertanian Selangor (PKPS)
8) Civil Service Department Scholarship Award for Doctrate‟s Degree (Skim Latihan
Akademik Bumiputra- SLAB) (1991)
Awarding Body
: Civil Service Department
9) Research Award (1997) (Group Category) University Technology Malaysia
Awarding Body
: University Technology Malaysia.
10) Universiti Teknologi Malaysia Merit Award 2000
Awarding Body
: University Technology Malaysia.
74
11)
Pingat Ibrahim Sultan (P.I.S. II) (2002)
Awarding Body
12)
Pingat Pita Semat (Clasp) (2002)
Awarding Body
13)
: The State Government of Johor.
: The Ministry of Defence
Pingat Kebaktian (P.K.) (2003)
Awarding Body
: The Federal Government of Malaysia.
14) Darjah Ahli Mahkota Perak (A.M.P.) (2003)
Awarding Body
15)
: The State Government of Perak
Anugerah Khidmat Bakti (Long Service Award) (2004)
Awarding Body
: Universiti Teknologi Malaysia.
16) Kesatria Mangku Negara (K.M.N.) (2005)
Awarding Body
17)
: The Federal Government of Malaysia.
Universiti Teknologi Malaysia Excellence Service Award 2006
Awarding Body
: University Technology Malaysia.
75