Catalog – Veterinary Products
2012
Implants
Instruments
Sets
Historical Background
Before 1937, the treatment of fractures in large and small animals was confined mainly to casts and splints.
Between this period and the mid-1960s, fixation by Stader and Kirschner-Ehmer splints, bone sutures, and the
occasional Sherman or Lane bone plate was added to the veterinary armamentarium. The functional and anatomical
results were less than desirable in many cases, and nonunion, malunion, and stiff joints were not uncommon.
This mirrored the state of the art of internal fixation of fractures in man at the time.
Fracture treatment, however, took a tremendous leap forward in 1958 when the Swiss Association for the Study of
Internal Fixation (in German: Arbeitsgemeinschaft für Osteosynthesefragen—AO) defined the biomechanical principles
for successful internal fixation of fractures, and implemented these principles with the creation of an entire system of
stainless steel implants and instruments. Their applied fracture research was carried out in the Laboratory for
Experimental Surgery in Davos, Switzerland, based on metallurgical expertise gleaned from the watch-making industry
and expert European toolmakers.
Documentation in Bern of more than 100,000 clinical cases using these AO methods, and based on a comprehensive
classification of fractures, confirmed the reliability and quality of the system. The central theme was the rapid return of
function after fracture treatment. This was accomplished by anatomical reduction, stable internal fixation with implants
utilizing interfragmentary compression, buttressing, medullary splintage, and preservation or enhancement of the blood
supply in the fracture zone by early exercise and early bone grafting. There was usually no necessity for casts or
external splintage. Emphasis was also placed on preoperative planning, operative asepsis, gentle soft tissue handling
and atraumatic exposure of the fractured bone, and early postoperative mobilization of the part and the patient.
Protected weight-bearing and careful radiographic monitoring until union was achieved completed the regime.
The bridge between human and veterinary fracture treatment, and indeed orthopaedics, began to be built early in the
1940s by Kuntscher with the experimental work on intramedullary nailing in dogs. Dr. Jacques Jenny, as a resident in
Zurich in 1943, assisted Dr. H. Knoll and Dr. H. Willenegger with the first clinical canine femoral intramedullary nailing.
In 1965, Drs. J. Jenny and R.B. Hohn, encouraged by Dr. Howard Rosen, introduced AO techniques in large and small
animal orthopaedic surgery at the University of Pennsylvania and the Animal Medical Center in New York, respectively,
utilizing human AO principles and instrumentation.
Following participation in 1969 at a human AO course in Davos, a number of active American and Swiss veterinary
surgeons initiated courses for veterinarians at Bettlach, Waldenburg and Davos in Switzerland, and at the Ohio State
University in Columbus, Ohio, in the United States. Veterinary AO sections were started in these two countries with the
special help of Fritz Straumann, and were united with groups from other countries as an international organization in
1970. Basic and Advanced courses have been held regularly in Switzerland, the United States, and other countries.
Research led to the design of new implants which would conform to the anatomical and functional requirements of
animals, and to the definition of techniques specific for the various animal species. The original AO principles have
proven to be as successful in large and small animals as in humans. This has been clearly demonstrated by analysis
of the documentation of the treatment and follow-up of thousands of animal fractures.
chronOS, DCP, Fastight, LC-DCP, LCP, and Synthes are trademarks of Synthes, Inc. or its affiliates.
© 2008 Synthes, Inc. or its affiliates. All rights reserved. Printed in U.S.A.
No extracts or copies of this catalog may be made without the written permission of Synthes, Inc. All Synthes VET catalogs and price
lists remain the property of Synthes and may only be used in connection with the instruments and implants distributed by Synthes.
www.synthesvet.com
4/12
Terms and Conditions
ORDERING INFORMATION
Telephone Orders (routine), call Synthes Customer Service toll-free: 1-800-523-0322
Fax Orders, fax toll free: 1-800-Synthes (796-8437)
Internet Order Processing, for information: www.synthesvet.com
Product Support, call the Synthes Vet Tech Support Line: 1-800-345-1272 ext. 921-6599
Or: 1-610-719-6599
Synthes Vet
1302 Wrights Lane East
West Chester, PA 19380
www.synthesvet.com
TERMS: NET 30 DAYS
FOB shipping point: Monument, CO
SERVICE DEPARTMENT
Return Authorization is required before returning product to Synthes for service or repair.
For a Return Authorization Number, call the Synthes Service Department: 1-800-288-6698
Mark the Return Authorization Number on the inside and outside of the package and ship to:
Synthes
Attn: Service Department
1101 Synthes Avenue
Monument, CO 80132
RETURN INSTRUCTIONS
•
No product may be returned for credit once that item has been removed from its original sterile or nonsterile package, or
after 90 days from invoice date.
•
Instruments and implants which are made on special request, even if unopened, may not be returned to Synthes for credit
under any circumstances.
•
A Return Authorization number and a copy of the invoice or packing slip must accompany all returns.
•
All returns after 30 days from date of invoice are subject to a minimum restocking fee of 5%.
•
Credit for returned goods will only be issued upon Synthes determination of acceptable condition.
•
For a Return Authorization Number, call the Synthes Credit and Return Department: 1-800-479-6329. Mark the Return
Authorization Number on the inside and outside of the package and ship to:
Synthes
Attn: Returns Department
1101 Synthes Avenue
Monument, CO 80132
Instruments and implants approved by the AO Foundation
4/12
Terms and Conditions— continued
SYNTHES WARRANTY POLICY
Synthes offers a lifetime warranty for catalog instruments purchased from Synthes. This warranty presumes that the
instruments are used with Synthes implants under normal operating conditions, and with established AO techniques.
Excepted from this warranty are items which have been abused and those that become unserviceable through prolonged use.
•
Warranty is limited to the repair or replacement of instruments.
•
Repair or replacement is dependent upon return of the instrument to Synthes.
•
Excluded from this warranty are all cutting instruments, i.e. drill bits, taps, chisels, fixed head reamers, osteotomes,
periosteal elevators, and gouges.
•
This warranty and the undertaking to replace or repair is in exclusion of all other warranties and remedies.
•
For Synthes Anspach Power Equipment warranty information, please contact a Synthes Vet Consultant via the Synthes
Vet Tech Support Line.
IN CANADA
To order, call Customer Service:
1-800-668-1119 (English)
1-800-461-3243 (French)
All other inquiries: 1-888-855-5513
Fax: 905-567-3185
Address correspondence and returns to:
Synthes (Canada) Ltd.
2566 Meadowpine Boulevard
Mississauga, Ontario L5N 6P9
POWER EQUIPMENT
Routine product reorders or other customer services, call the Synthes Anspach Customer Service Department at
(800) 327-6887.
Return material authorizations (RMAs) for returns or servicing your power equipment, call the Synthes Anspach Customer
Service Department at (800) 327-6887.
Technical questions or new purchase inquiries about any of the Synthes Anspach products (Small Battery Drive, High Speed
Drills, etc.) call the Synthes Vet Technical Support Line at 610-719-6599.
www.synthesvet.com
4/12
CONTENTS
Instrument and
Implant Sets
1–1 thru 1–33
Implants
2–1 thru 2–35
Instruments
3–1 thru 3–43
Cases
and Trays
4–1 thru 4–14
Reference
Materials
5–1
Biomaterial Products
Numerical Index
Alphabetical Index
6–1 thru 6–2
N–1 thru N–3
A–1 thru A–2
i
ii
Information on Synthes Stainless Steel Implants
Synthes implants are produced from implant-quality type 316L stainless steel, which typically contains 62.5% iron, 17.6 %
chromium, 14.5% nickel, 2.8 % molybdenum, and minor alloy additions. A low carbon composition is specified to assure that
the material will be free from susceptibility to intergranular corrosion.
Implant-quality 316L stainless steel meets the metallurgical requirements established by the American Society for Testing and
Materials (ASTM) and the International Organization for Standardization (ISO). The major implant industry standards include
ASTM F 138 (bar and wire), ASTM F 139 (sheet and strip), and ISO 5832-1. Implant-quality material must also meet stringent
Synthes internal specifications for composition limits, microstructure uniformity, and mechanical properties. All implant-quality
material received from approved suppliers is recertified by Synthes (USA) to provide an extra measure of Quality Assurance that
metallurgical requirements have been met. Other implantable grades of stainless steel such as 22Cr-13Ni-5Mn have also been
used for specialized applications.
Certain implants, such as cerclage wire or pelvic reconstruction plates, are produced from AO implant-quality 316L stainless steel
in the annealed or softest condition. This is needed for applications which demand maximum contourability. The majority of 316L
stainless steel implants are produced from cold work or strengthened material. Some small diameter implants such as K-wire,
Steinmann pins, and Schanz screws may be highly cold worked to resist permanent bending deformation. Implant-quality 316L
stainless steel is completely nonmagnetic, regardless of condition.
Synthes instruments and implants are designed and manufactured to maintain optimum system performance. For this reason,
316L stainless steel implants produced by other manufacturers should not be mixed with 316L stainless steel implants. The in vivo
performance of a mixed implant system may be compromised as a result of composition differences, strength variations, and
design or workmanship factors.
The Synthes System offers:
1.
Implants and instruments of consistent high quality
2.
Implants made of metallurgically uniform and corrosion resistant stainless steel
3.
Implants with a good combination of strength and ductility
4.
Implants manufactured by methods which do not adversely affect the quality of the raw material
5.
Proper fit and dimensional uniformity as a result of precision manufacturing techniques
6.
A product reflecting the research efforts of a group of highly trained professionals
Reference:
Synthes Implant Materials: Wrought 18% Chromium-14% Nickel-2.5% Molybdenum Stainless Steel
www.synthesvet.com
4/12
iii
Causes of Corrosion and Surface Changes
Incorrect handling, exposure to various aggressive substances, and mechanical and thermal damage can significantly
decrease the corrosion resistance of the AO instruments. The following section deals with helping the user avoid a number
of possible causes of corrosion or damage.
Blood, Pus, Secretions
These surgical residues contain chloride ions which lead to corrosion, if left on instruments for an extended period of time,
especially if allowed to dry. Always clean and dry every instrument after use. Joints and tubular items should always be
rinsed and dried thoroughly.
Saline, Iodine Solutions, Water
Solutions containing halogens such as chloride and iodine ions can lead to pitting corrosion, especially when the passive
layer on instruments has been penetrated. Avoid prolonged exposure to these solutions. Tap water often contains a high
concentration of minerals which can be seen as a fine deposit on the instrument surface. Rinsing with distilled water
prevents such deposits. If deposits are present, they can generally be removed with a special nonabrasive steel cleaner.
Cleaning and Disinfecting Agents
Excessively strong concentrations of such substances, as well as strong alkaline or strong acidic solutions, can lead to
pitting corrosion. It is vital to observe the manufacturer’s instructions for suggested concentrations and exposure times.
Optimum cleaning agents are generally regarded as those with a pH value between 9.5 and 11. The temperature of such
agents should not exceed 45°C (115°F), to avoid protein coagulation and evaporation. A thorough rinsing to remove all
residue is necessary.
Abrasive Cleaning Materials
Abrasive pads, steel brushes and abrasive cleaners should never be used to clean surgical instruments. They damage the
passive layer of the instrument, which can eventually lead to corrosion.
Contact Between Instruments of Differing Alloys
Existing areas of rust can be transferred onto other instruments by an electrolytic process. Stainless steel instruments that
are in close contact for an extended period of time with items such as damaged chromium-coated instruments, and that
at the same time are dampened by an electrolyte, can develop rust at points of contact. Electrolytes can be steam, water,
ultrasonic cleaning agents, etc.
All instruments that are not made from the same alloy should be separately cleaned and sterilized. It is essential to replace
instruments that have started to corrode.
Inadequate Lubrication
Moving parts on instruments, such as joints, screw threads, etc., should be lubricated regularly. This reduces the resultant
wear that increases the risk of corrosion. Refer to the Synthes (USA) orthopaedic catalog for lubricant.
Cleaning Agent Residue in Wrapping Materials
Muslin used for wrapping instruments must not contain any residue from cleaning agents. Residue may be transferred
onto the instrument surface by steam, which can result in penetration of the protective passive layer and eventually lead
to corrosion.
Misuse of Instruments
AO instruments have been designed for specific purposes and should be used accordingly. Using an instrument incorrectly,
or for a purpose for which it was not designed, can result in mechanical overloading and permanent damage. This also
increases the likelihood of sensitivity to stress corrosion.
Instruments and implants approved by the AO Foundation
4/12
iv
Canine Growth Plate Fusion Chart
VARIATION IN AGES OF GROWTH PLATE FUSION—DOG
Forelimb
Scapular tuberosity
Proximal humerus
Distal humerus
Proximal ulna
Proximal radius
Distal radius
Distal ulna
Accessory carpal
Metacarpal
Proximal phalanx
Middle phalanx
Sumner-Smith, 1964
www.synthesvet.com
4/12
Hindlimb
Earliest
Fused
Latest
Unfused
12 w
10 m
5m
5m
5m
6m
6m
10 w
5m
16 w
16 w
5m
10 m
8m
8m
8m
9m
8m
5m
7m
5m
5m
Great trochanter
Proximal femur
Lesser trochanter
Distal femur
Proximal tibia
Proximal fibula
Distal tibia
Distal fibula
Tuber calcis
Metatarsal
Proximal phalanx
Middle phalanx
Earliest
Fused
Latest
Unfused
6m
6m
9m
6m
6m
6m
5m
5m
11 w
5m
16 w
16 w
9m
9m
10 m
8m
11 m
10 m
8m
8m
7m
7m
7m
5m
2.7
Instruments and implants approved by the AO Foundation
Drive Type
Tap
Catalog Number
Drill Bit for
Threaded Hole
THREADED HOLE
GLIDING HOLE
Drill Bit for
Gliding Hole
VS202
VS201
VS203
–
2.0
311.19
311.21 (long)
1.5
311.15
–
1.5 mm/ 2.0 mm
Cruciform
1.5
2.0
1.1
1.5
2.4 mm
Cruciform
–
1.8
2.4
311.32
311.33 (long)
3.5
2.5
3.5
VS302
VS301
3.5
2.5 mm Hex
311.26
311.28 (long)
2.7
2.0
2.7
DRILL BIT and TAP DIAMETER (mm)
VS102
VS101
VS205
VS204
2.4
Vet Part Number
Self-tapping
Non-self-tapping
2.0
Cortex
1.5
Screw Type
Thread Diameter
SCREW DIAMETER (mm)
311.55
5.5
4.0
5.5
–
VS501
5.5
3.5 mm Hex
311.46
311.48
4.5
3.2
4.5
VS402
VS401
4.5
311.34
4.0
2.5
–
VS404
16 mm
thread
6.5
32 mm
thread
Illustrations not actual size
3.5 mm Hex
311.66
6.5
3.2
4.5
VS601 VS602 VS603
Full
thread
Cancellous
Partial
thread
2.5 mm Hex
VS403
Full
thread
4.0
Standard Screws,
Drill Bits
andBits
Taps for
Stainless
Screws for Veterinary
Standard
Screws,
Drill
and
Taps Steel
for Veterinary
Use Use
v
Illustrations not actual size
4/12
4/12
Illustrations not actual size
www.synthesvet.com
Drive Type
Drill Bit for
Threaded Hole
Self-tapping
Vet Part Number
Screw Type
Thread Diameter
VS208
2.4
T6 StarDrive
1.5
1.8
2.0
VS206
2.7
T8 StarDrive
DRILL BIT DIAMETER (mm)
VS207
2.0
SCREW DIAMETER (mm)
T15 StarDrive
2.8
VS303
Locking Head
3.5
3.2
VS406
4.0
Locking
Screws
and Drill
for Stainless
Screws forUse
Veterinary Use
Locking
Screws
andBits
Drill
Bits forSteel
Veterinary
T25 StarDrive
Illustrations not actual size
4.3
VS502
5.0
vi
Instruments and implants approved by the AO Foundation
Drive Type
Drill Bit for Threaded Hole
Vet P/N
Thread Diameter
Screw Type
VST201
VST201
1.5
PlusDrive
1.5
PlusDrive
Cruciform
1.8
VST211
2.4
Cortex
DRILL BIT DIAMETER (mm)
2.0 Coarse
2.0
SCREW DIAMETER (mm)
PlusDrive
1.5
VST203
2.4 Emergency
PlusDrive
1.5
VST202
2.0
Cruciform
1.8
VST212
2.4
Locking
Screw and Drill Information for Self Tapping, Titanium Screws for Veterinary Use
Cruciform
2.4
VST311
3.0
vii
4/12
1-1
The AO set system permits a reasonable number of basic instruments to be used for many applications and the ability to combine
these standard devices with additionally available instruments and implants for special cases and applications.
Standard Instrument Sets
These sets contain basic instruments and implants which permit the treatment of most fractures. Their use is described in the latest
editions of the AO Principles of Fracture Management in the Dog and Cat and the AO Principles of Equine Osteosynthesis. If the
techniques described in these manuals are properly followed, the chances for successful fixation are greatly improved. It is
important that the standard instrument sets should always be complete so that during an operation an important instrument or
implant is not missing. While the number of screws or plates in the implant sets can be reduced or adapted to the usage of the
clinic, it is not advisable to delete certain lengths or certain types of plates.
Note: Because of the continuing development of the AO Instrumentation by the AO Technical Commission, it is possible that
shape, form and dimension of the instruments and implants or the contents of certain standard sets are changed from
time to time. Always refer to the latest edition of your Synthes catalog for details.
Mini Fragment Instrument and Implant Sets .....................................1-2
Small Fragment Instrument and Implant Sets ....................................1-8
TPLO Plate Set ................................................................................1-17
CRIF Instrument and Implant Sets ...................................................1-18
Large Fragment Instrument and Implant Sets..................................1-20
Screw Removal Set .........................................................................1-31
Illustrations not actual size
www.synthesvet.com
4/12
Instrument and
Implant Sets
AO Set System
1-2
Instrument and
Implant Sets
Mini Fragment Instrument Set
103.521 Mini Fragment Instrument Set
(includes standard set 103.522 and locking set 103.523)
690.521
Mini Fragment Instrument Graphic Case
Instruments (in set 103.522)
1.1 mm Drill Bit, quick coupling, 60 mm, 2 ea.
1.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.
1.8 mm Drill Bit, quick coupling, 100 mm, 2 ea.
2.4 mm Drill Bit, quick coupling, 100 mm,
2 ea.
310.88
Countersink, for 1.5 mm and 2.0 mm Cortex
Screws
310.972
Countersink for 2.0 mm and 2.4 mm screws
311.01
Handle, with mini quick coupling
311.15
Tap for 1.5 mm Cortex Screws, 50 mm
311.19
Tap for 2.0 mm Cortex Screws, 54 mm
312.14
1.5 mm/1.1 mm Double Drill Guide
312.181
2.4 mm/1.8 mm Drill Sleeve
313.94
2.4 mm Screwdriver, with Holding Sleeve
314.67.97 Cruciform Screwdriver Shaft, with Holding Sleeve
319.006
Depth Gauge, for 2.0 mm and 2.4 mm Cortex
Screws
319.11
Depth Gauge, for 1.5 mm and 2.0 mm Cortex
Screws
319.97
Screw Forceps
323.201
2.0 mm Universal Drill Guide
323.202
2.4 mm Universal Drill Guide
329.01
Bending Iron, for 1.5 mm and 2.0 mm plates,
2 ea.
310.11
310.16
310.19
310.510
310.530
03.111.010
03.111.011
311.43
313.843
314.467
329.921
329.922
Instruments (in set 103.523)
1.5 mm LCP Solid Threaded Drill Guide,
for 2.0 mm LCP Plates, 2 ea.
1.8 mm LCP Solid Threaded Drill Guide,
for 2.4 mm LCP Plates, 2 ea.
Handle, with quick coupling
2.0 mm Screwdriver Blade, self-retaining,
StarDrive, long
StarDrive Screwdriver Shaft, T8, 105 mm
Threaded Bending Pin, for 2.0 mm LCP Plates,
2 ea.
Bending Pin, for 2.4 mm Locking Plates, 2 ea.
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-3
Mini Fragment Standard Instrument Set
690.521
Mini Fragment Instrument Graphic Case
310.11
310.16
310.19
310.510
310.530
310.88
310.972
311.01
311.15
311.19
312.14
312.181
313.94
314.67.97
319.006
319.11
319.97
323.201
323.202
329.01
Instruments
1.1 mm Drill Bit, quick coupling, 60 mm, 2 ea.
1.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
2.0 mm Drill Bit, quick coupling, 100 mm, 2 ea.
1.8 mm Drill Bit, quick coupling, 100 mm, 2 ea.
2.4 mm Drill Bit, quick coupling, 100 mm, 2 ea.
Countersink, for 1.5 mm and 2.0 mm Cortex Screws
Countersink for 2.0 mm and 2.4 mm screws
Handle, with mini quick coupling
Tap for 1.5 mm Cortex Screws, 50 mm
Tap for 2.0 mm Cortex Screws, 54 mm
1.5 mm/1.1 mm Double Drill Guide
2.4 mm/1.8 mm Drill Sleeve
2.4 mm Screwdriver, with Holding Sleeve
Cruciform Screwdriver Shaft, with Holding Sleeve
Depth Gauge, for 2.0 mm and 2.4 mm Cortex Screws
Depth Gauge, for 1.5 mm and 2.0 mm Cortex Screws
Screw Forceps
2.0 mm Universal Drill Guide
2.4 mm Universal Drill Guide
Bending Iron, for 1.5 mm and 2.0 mm plates, 2 ea.
Illustrations not actual size
www.synthesvet.com
4/12
Instrument and
Implant Sets
103.522 Mini Fragment Standard Instrument Set
1-4
Instrument and
Implant Sets
Mini Fragment Locking Instrument Set
103.523 Mini Fragment Locking Instrument Set
03.111.010
03.111.011
311.43
313.843
314.467
329.921
329.922
Instruments
1.5 mm LCP Solid Threaded Drill Guide, for 2.0 mm LCP Plates, 2 ea.
1.8 mm LCP Solid Threaded Drill Guide, for 2.4 mm LCP Plates, 2 ea.
Handle, with quick coupling
2.0 mm Screwdriver Blade, self-retaining, StarDrive, long
StarDrive Screwdriver Shaft, T8, 105 mm
Threaded Bending Pin, for 2.0 mm LCP Plates, 2 ea.
Bending Pin, for 2.4 mm Locking Plates, 2 ea.
Note:
Instruments fit in Mini Fragment Instrument Graphic Case (690.521)
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-5
Mini Fragment Implant Set
Lids not shown
690.522
690.523
690.524
Mini Fragment Implant Set Graphic Case
Mini Fragment Standard Implant Module (in set 103.527)
Mini Fragment Locking Implant Module (in set 103.528)
VS102.006–
VS102.012
Implants (in set 103.527)
1.5 mm Cortex Screws, self-tapping
3 ea: 6, 7, 8, 9, 10, 11 and 12 mm
VS202.006–
VS202.020
2.0 mm Cortex Screws, self-tapping
3 ea: 6, 8, 10, 12, 14, 16, 18 and 20 mm
VS203.008–
VS203.028
2.4 mm Cortex Screws, self-tapping
3 ea: 8, 10, 12, 14, 16, 18, 20, 22,
24, 26 and 28 mm
VP3011.05
2.0 mm/1.5 mm LC-DCP Plate, 5 holes,
31 mm
2.0 mm/1.5 mm LC-DCP Plate, 7 holes,
43 mm
2.0 mm/1.5 mm LC-DCP Plate, 9 holes,
55 mm
VP3011.07
VP3012.09
VP3021.05
VP3021.07
VP3022.09
2.4 mm/2.0 mm LC-DCP Plate, 5 holes,
41 mm
2.4 mm/2.0 mm LC-DCP Plate, 7 holes,
57 mm
2.4 mm/2.0 mm LC-DCP Plate, 9 holes,
53 mm
Illustrations not actual size
www.synthesvet.com
4/12
VS207.006–
VS207.020
Implants (in set 103.528)
2.0 mm Locking Screws
2 ea: 6, 7, 8, 9, 10, 11, 12, 13,
14, 16, 18 and 20 mm
VS208.008–
VS208.020
2.4 mm Locking Screws
2 ea: 8, 9, 10, 11, 12, 13,
14, 16, 18 and 20 mm
VP4011.05
2.0 mm/1.5 mm LCP Plate, 5 holes,
34 mm
2.0 mm/1.5 mm LCP Plate, 7 holes,
48 mm
2.0 mm/1.5 mm LCP Plate, 9 holes,
62 mm
VP4011.07
VP4012.09
VP4021.05
VP4021.07
VP4022.09
2.4 mm LCP Plate, 5 holes, 40 mm
2.4 mm LCP Plate, 7 holes, 56 mm
2.4 mm LCP Plate, 9 holes, 72 mm
Instrument and
Implant Sets
103.524 Mini Fragment Implant Set
(includes standard set 103.527 and locking set 103.528)
1-6
Instrument and
Implant Sets
Mini Fragment Standard Implant Set
103.527 Mini Fragment Standard Implant Set
Lid not shown
690.523
Mini Fragment Standard Implant Module*
VS102.006–
VS102.012
Implants
1.5 mm Cortex Screws, self-tapping
3 ea: 6, 7, 8, 9, 10, 11 and 12 mm
VS202.006–
VS202.020
2.0 mm Cortex Screws, self-tapping
3 ea: 6, 8, 10, 12, 14, 16, 18 and 20 mm
VS203.008–
VS203.028
2.4 mm Cortex Screws, self-tapping
3 ea: 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 and 28 mm
VP3011.05
VP3011.07
VP3012.09
2.0 mm/1.5 mm LC-DCP Plate, 5 holes, 31 mm
2.0 mm/1.5 mm LC-DCP Plate, 7 holes, 43 mm
2.0 mm/1.5 mm LC-DCP Plate, 9 holes, 55 mm
VP3021.05
VP3021.07
VP3022.09
2.4 mm/2.0 mm LC-DCP Plate, 5 holes, 41 mm
2.4 mm/2.0 mm LC-DCP Plate, 7 holes, 57 mm
2.4 mm/2.0 mm LC-DCP Plate, 9 holes, 53 mm
*Includes five Holding Clips (319.44) for securing plates
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-7
Mini Fragment Locking Implant Set
Instrument and
Implant Sets
103.528 Mini Fragment Locking Implant Set
Lid not shown
690.524
Mini Fragment Locking Implant Module*
VS207.006–
VS207.020
Implants
2.0 mm Locking Screws
2 ea: 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18 and 20 mm
VS208.008–
VS208.020
2.4 mm Locking Screws
2 ea: 8, 9, 10, 11, 12, 13, 14, 16, 18 and 20 mm
VP4011.05
VP4011.07
VP4012.09
2.0 mm/1.5 mm LCP Plate, 5 holes, 34 mm
2.0 mm/1.5 mm LCP Plate, 7 holes, 48 mm
2.0 mm/1.5 mm LCP Plate, 9 holes, 62 mm
VP4021.05
VP4021.07
VP4022.09
2.4 mm LCP Plate, 5 holes, 40 mm
2.4 mm LCP Plate, 7 holes, 56 mm
2.4 mm LCP Plate, 9 holes, 72 mm
*Includes five Holding Clips (319.44) for securing plates
Illustrations not actual size
www.synthesvet.com
4/12
1-8
Instrument and
Implant Sets
Small Fragment Instrument Set
103.503 Small Fragment Instrument Set
(includes standard set 103.501 and locking set 103.502)
690.591
VW1203.15
VW2003.15
310.21
310.25
310.26
310.35
310.89
311.26
311.32
311.34
311.43
311.44
312.20
312.30
314.02
314.03
319.01
319.97
323.26
323.36
329.04
329.05
Small Fragment Instrument Set Graphic Case
Instruments (in set 103.501)
1.25 mm Kirchner Wire, 150 mm (10/pkg.)
2.0 mm Kirschner Wire, 150 mm (10/pkg.)
2.0 mm Drill Bit, quick coupling, 125 mm, 2 ea.
2.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
2.7 mm Drill Bit, quick coupling, 100 mm, 2 ea.
3.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
Countersink, for 3.5 mm cortex and
4.0 mm cancellous bone screws
Tap for 2.7 mm cortex screws
Tap for 3.5 mm cortex screws
Tap for 4.0 mm cancellous screws
Handle, with quick coupling
T-Handle, with quick coupling
2.0 mm Parallel Drill Guide
3.5 mm/2.5 mm Insert
Small Hexagonal Screwdriver, with
holding sleeve
Small Hexagonal Screwdriver Shaft
Depth Gauge
Screw Forceps
2.7 mm Universal Drill Guide
3.5 mm Universal Drill Guide
Bending Iron, for 2.7 mm and 3.5 mm plates
Bending Iron, for 2.7 mm and 3.5 mm plates
VW1605.15
310.288
312.648
313.353
314.115
314.116
314.467
314.468
323.023
324.023
324.024
Instruments (in set 103.502)
1.6 mm Kirschner Wire with Thread,
150 mm (10/pkg.)
2.8 mm Drill Bit, quick coupling, 165 mm, 2 ea.
2.8 mm Threaded Drill Guide, 2 ea.
Drill Sleeve for 2.0 mm Drill Bit, 2 ea.
StarDrive Screwdriver, T15
StarDrive Screwdriver Shaft, T15
StarDrive Screwdriver Shaft, T8
Holding Sleeve for 314.467
1.6 mm Wire Sleeve
Threaded Plate Holder
Push-Pull Reduction Device
Also available: Torque Limiting Attachments 511.773 and 511.776 (shown, but not included in set)
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-9
Small Fragment Standard Instrument Set
Instrument and
Implant Sets
103.501 Small Fragment Standard Instrument Set
Lid not shown
690.591
Small Fragment Instrument Set Graphic Case
VW1203.15
VW2003.15
310.21
310.25
310.26
310.35
310.89
311.26
311.32
311.34
311.43
311.44
312.20
312.30
314.02
314.03
319.01
319.97
323.26
323.36
329.04
329.05
1.25 mm Kirchner Wire, 150 mm (10/pkg.)
2.0 mm Kirschner Wire, 150 mm (10/pkg.)
2.0 mm Drill Bit, quick coupling, 125 mm, 2 ea.
2.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
2.7 mm Drill Bit, quick coupling, 100 mm, 2 ea.
3.5 mm Drill Bit, quick coupling, 110 mm, 2 ea.
Countersink, for 3.5 mm cortex and 4.0 mm cancellous bone screws
Tap for 2.7 mm cortex screws
Tap for 3.5 mm cortex screws
Tap for 4.0 mm cancellous screws
Handle, with quick coupling
T-Handle, with quick coupling
2.0 mm Parallel Drill Guide
3.5 mm/2.5 mm Insert
Small Hexagonal Screwdriver, with holding sleeve
Small Hexagonal Screwdriver Shaft
Depth Gauge
Screw Forceps
2.7 mm Universal Drill Guide
3.5 mm Universal Drill Guide
Bending Iron, for 2.7 mm and 3.5 mm plates
Bending Iron, for 2.7 mm and 3.5 mm plates
Also available: Small Fragment Instrument Set with Jacobs Chuck (103.501JC): substitutes Jacobs chuck
drill bits (310.20, 310.24, 310.27 and 310.36) in the standard contents above.
Illustrations not actual size
www.synthesvet.com
4/12
1-10
Instrument and
Implant Sets
Small Fragment Locking Instrument Set
103.502 Small Fragment Locking Instrument Set
VW1605.15
310.288
312.648
313.353
314.115
314.116
314.467
314.468
323.023
324.023
324.024
1.6 mm Kirschner Wire with Thread, 150 mm (10/pkg.)
2.8 mm Drill Bit, quick coupling, 165 mm, 2 ea.
2.8 mm Threaded Drill Guide, 2 ea.
Drill Sleeve for 2.0 mm Drill Bit, 2 ea.
StarDrive Screwdriver, T15
StarDrive Screwdriver Shaft, T15
StarDrive Screwdriver Shaft, T8
Holding Sleeve for 314.467
1.6 mm Wire Sleeve
Threaded Plate Holder
Push-Pull Reduction Device
Also available: Torque Limiting Attachments 511.773 and 511.776
Note: Instruments fit in Small Fragment Instrument Set Graphic Case (690.591)
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-11
Small Fragment DCP Plate Set
Instrument and
Implant Sets
103.513 Small Fragment DCP Plate Set
Lid not shown
690.511
Small Fragment Plate Set Graphic Case*
VP2030.05–
VP2030.09
Implants
2.7 mm DCP Plates
1 ea: 5, 7 and 9 holes
VP2040.05–
VP2040.09
3.5 mm DCP Plates
1 ea: 5, 7 and 9 holes
VP2050.07–
VP2050.11
3.5 mm Broad DCP Plates
1 ea: 7, 9 and 11 holes
*Holds two each of most commonly used 2.7 mm, 3.5 mm and 3.5 mm broad plates
Illustrations not actual size
www.synthesvet.com
4/12
1-12
Instrument and
Implant Sets
Small Fragment LC-DCP Plate Set
103.514 Small Fragment LC-DCP Plate Set
Lid not shown
690.511
Small Fragment Plate Set Graphic Case*
VP3031.05–
VP3031.09
Implants
2.7 mm LC-DCP Plates
1 ea: 5, 7 and 9 holes
VP3041.05–
VP3041.09
3.5 mm LC-DCP Plates
1 ea: 5, 7 and 9 holes
VP3051.07–
VP3051.11
3.5 mm Broad LC-DCP Plates
1 ea: 7, 9 and 11 holes
*Holds two each of most commonly used 2.7 mm, 3.5 mm and 3.5 mm broad plates
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-13
Small Fragment LCP Plate Set
Instrument and
Implant Sets
103.516 Small Fragment LCP Plate Set
Lid not shown
690.511
Small Fragment Plate Set Graphic Case*
VP4031.05–
VP4031.09
Implants
2.7 mm LCP Plates
1 ea: 5, 7 and 9 holes
VP4041.05–
VP4041.09
3.5 mm LCP Plates
1 ea: 5, 7 and 9 holes
VP4045.07–
VP4045.11
3.5 mm Broad LCP Plates
1 ea: 7, 9 and 11 holes
*Holds two each of most commonly used 2.7 mm, 3.5 mm and 3.5 mm broad plates
Illustrations not actual size
www.synthesvet.com
4/12
1-14
Instrument and
Implant Sets
Small Fragment Screw Set
103.515 Small Fragment Screw Set
(includes standard set 103.518 and locking set 103.517)
2.7 mm Locking Screws
and lid not shown
690.515
690.592
690.593
Small Fragment Screw Set Graphic Case
Small Fragment Locking Screw Rack (for 2.7 mm and 3.5 mm screws), in set 103.517
Small Fragment Standard Screw Rack (for 2.7 mm, 3.5 mm and 4.0 mm screws), in set 103.518
VS206.018–
VS206.028
Implants (in set 103.517)
2.7 mm Locking Screws, self-tapping, with StarDrive recess
2 ea.: 18, 20, 22, 24, 26, and 28 mm
VS303.018–
VS303.050
3.5 mm Locking Screws, self-tapping, with StarDrive recess
1 ea.: 20 and 50 mm
2 ea.: 22, 24, 26, 28, 30, 32, 34, 36, 38, 40 and 45 mm
VS205.008–
VS205.020
Implants (in set 103.518)
2.7 mm Cortex Screws, self-tapping
6 ea.: 6, 8, 10, 12, 14,16, 18 and 20 mm
VS302.012–
VS302.030
3.5 mm Cortex Screws, self-tapping
6 ea.: 12, 14, 16, 18, 20, 22, 24, 26, 28 and 30 mm
VS403.016–
VS403.030
4.0 mm Cancellous Bone Screws, fully threaded
1 ea.: 16, 18, 20, 22, 24, 26, 28 and 30 mm
Also available: Small Fragment Screw Sets 103.517 and 103.518
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-15
Small Fragment Locking Screw Set
Instrument and
Implant Sets
103.517 Small Fragment Locking Screw Set
2.7 mm Locking Screws
and lid not shown
690.592
Small Fragment Locking Screw Rack (for 2.7 mm and 3.5 mm screws)
VS206.018–
VS206.028
Implants
2.7 mm Locking Screws, self-tapping, with StarDrive recess
2 ea.: 18, 20, 22, 24, 26, and 28 mm
VS303.018–
VS303.050
3.5 mm Locking Screws, self-tapping, with StarDrive recess
1 ea.: 20 and 50 mm
2 ea.: 22, 24, 26, 28, 30, 32, 34, 36, 38, 40 and 45 mm
Also available: Small Fragment Screw Sets 103.515 and 103.518
For additional length screws, see pages 2–4 and 2–6.
Illustrations not actual size
www.synthesvet.com
4/12
1-16
Instrument and
Implant Sets
Small Fragment Standard Screw Set
103.518 Small Fragment Standard Screw Set
Lid not shown
690.593
Small Fragment Standard Screw Rack (for 2.7 mm, 3.5 mm and 4.0 mm screws)
VS205.008–
VS205.020
Implants
2.7 mm Cortex Screws, self-tapping
6 ea.: 6, 8, 10, 12, 14,16, 18 and 20 mm
VS302.012–
VS302.030
3.5 mm Cortex Screws, self-tapping
6 ea.: 12, 14, 16, 18, 20, 22, 24, 26, 28 and 30 mm
VS403.016–
VS403.030
4.0 mm Cancellous Bone Screws, fully threaded
1 ea.: 16, 18, 20, 22, 24, 26, 28 and 30 mm
Also available: Small Fragment Screw Sets 103.515 and 103.517
For additional length screws, see pages 2–3 to 2–6.
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-17
Tibial Plateau Leveling Osteotomy Plate Set
690.590
Tibial Plateau Leveling Osteotomy (TPLO) Plate Set Graphic Case
VP4405.L3
VP4405.R3
2.0 mm Tibial Plateau Leveling Osteotomy (TPLO) Plates (2 ea.)
3 holes
left
3 holes
right
VP4404.L3
VP4404.R3
2.4 mm Tibial Plateau Leveling Osteotomy (TPLO) Plates (2 ea.)
3 holes
left
3 holes
right
VP4400.L3
VP4400.R3
2.7 mm Tibial Plateau Leveling Osteotomy (TPLO) Plates (2 ea.)
3 holes
left
3 holes
right
VP4403.L3
VP4403.R3
3.5 mm Small Tibial Plateau Leveling Osteotomy (TPLO) Plates (2 ea.)
3 holes
left
3 holes
right
VP4401.L3
VP4401.R3
3.5 mm Tibial Plateau Leveling Osteotomy (TPLO) Plates (2 ea.)
3 holes
left
3 holes
right
VP4402.L4
VP4402.R4
3.5 mm Broad Tibial Plateau Leveling Osteotomy (TPLO) Plates (2 ea.)
4 holes
left
4 holes
right
Illustrations not actual size
www.synthesvet.com
4/12
Instrument and
Implant Sets
103.512 Tibial Plateau Leveling Osteotomy Plate Set
1-18
Instrument and
Implant Sets
Clamp Rod Internal Fixation (CRIF) Implant Set
103.001 Clamp Rod Internal Fixation (CRIF) Implant Set
690.516
Clamp Rod Internal Fixation (CRIF) Implant Graphic Case
388.868
Instrument
Template for 3.5 mm Rod, 2 ea.
VC2000.01
VC2000.02
VC3000.01
VC3000.02
VC5000.01
VC5000.02
Implants
Mini Clamp, for use with 2.0 mm screws/2.0 mm rods, 10 ea.
Mini End Clamp, for use with 2.0 mm screws/2.0 mm rods, 4 ea.
Small Clamp, for use with 2.7 mm screws/3.0 mm rods, 10 ea.
Small End Clamp, for use with 2.7 mm screws/3.0 mm rods, 4 ea.
Medium Clamp, for use with 3.5 mm screws/5.0 mm rods, 10 ea.
Medium End Clamp, for use with 3.5 mm screws/5.0 mm rods, 4 ea.
VR201.030–
VR201.090
2.0 mm Rods
2 ea: 30, 45, and 90 mm
VR301.045–
VR301.120
3.0 mm Rods
2 ea: 45, 90, and 120 mm
VR501.060–
VR501.240
5.0 mm Rods
2 ea: 60, 75, 90, 105, 120, 150, 180, 210 and 240 mm
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-19
Clamp Rod Internal Fixation (CRIF) Instrument Set
690.517
Clamp Rod Internal Fixation (CRIF) Instrument Graphic Case
312.561
392.00
392.970
392.971
392.972
392.973
392.974
Rod Bender, for 3.0 mm and 5.0 mm rods
Bending Iron, for 1.25 mm, 1.6 mm and 2.0 mm Kirschner wires, 2 ea.
Rod Holding Forceps, for 2.0 mm rods, mini
Rod Holding Forceps, for 3.0 mm rods, small
Rod Holding Forceps, for 5.0 mm rods, medium
Clamp Spreader, for mini clamps
Clamp Spreader, for small and medium clamps
Illustrations not actual size
www.synthesvet.com
4/12
Instrument and
Implant Sets
103.002 Clamp Rod Internal Fixation (CRIF) Instrument Set
1-20
Instrument and
Implant Sets
Large Fragment Instrument Set
103.530 Large Fragment Instrument Set
(includes standard set 103.531 and locking set 103.532)
690.542
310.29
310.40
310.48
310.55
310.99
311.44
311.48
311.55
311.66
312.46
312.560
314.11
314.15
314.27
319.10
321.12
321.20
322.535
323.46
Large Fragment Instrument Set Graphic Case, veterinary
Instruments (in set 103.531)
3.2 mm Drill Bit, quick coupling, 195 mm
4.0 mm Drill Bit, quick coupling, 197 mm
4.5 mm Drill Bit, quick coupling, 195 mm
5.5 mm Drill Bit, quick coupling, 197 mm
Countersink, for 4.5 mm Cortex and 6.5 mm
Cancellous Bone Screws
T-Handle, with quick coupling
Tap for 4.5 mm Cortex and 4.5 mm Shaft Screws,
180 mm/110 mm tap depth
Tap for 5.5 mm Cortex Screws, 197 mm,
100 mm tap depth, quick coupling
Tap for 6.5 mm Cancellous Bone Screws,
197 mm/150 mm calibration
4.5 mm/3.2 mm Double Drill Sleeve
5.5 mm/4.0 mm Double Drill Sleeve, veterinary
Holding Sleeve, for use with Hexagonal
Screwdrivers
Large Hexagonal Screwdriver Shaft, quick coupling
Large Hexagonal Screwdriver
Depth Gauge, measures up to 110 mm
Articulated Tension Device, with gauge,
span 20 mm
Ratchet Wrench, 11 mm width across flats
5.5 mm Universal Drill Guide
4.5 mm Universal Drill Guide
310.431
311.449
312.449
314.118
314.119
397.705
511.771
Instruments (in set 103.532)
4.3 mm Drill Bit, quick coupling, 180 mm,
for 5.0 mm Locking Screws
Push-Pull Reduction Device, for use with 4.5 mm
LCP Plates
4.3 mm Threaded Drill Guide, 3 ea.
StarDrive Screwdriver, T25, self-retaining, 245 mm
StarDrive Screwdriver Shaft, T25, self-retaining,
quick coupling, 165 mm
Handle, quick coupling
Torque Limiting Attachment, 4 Nm
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-21
Large Fragment Standard Instrument Set
690.542
Large Fragment Instrument Set Graphic Case, veterinary
310.29
310.40
310.48
310.55
310.99
311.44
311.48
311.55
311.66
312.46
312.560
314.11
314.15
314.27
319.10
321.12
321.20
322.535
323.46
Instruments
3.2 mm Drill Bit, quick coupling, 195 mm
4.0 mm Drill Bit, quick coupling, 197 mm
4.5 mm Drill Bit, quick coupling, 195 mm
5.5 mm Drill Bit, quick coupling, 197 mm
Countersink, for 4.5 mm Cortex and 6.5 mm Cancellous Bone Screws
T-Handle, with quick coupling
Tap for 4.5 mm Cortex and 4.5 mm Shaft Screws, 180 mm/110 mm tap depth
Tap for 5.5 mm Cortex Screws, 197 mm, 100 mm tap depth, quick coupling
Tap for 6.5 mm Cancellous Bone Screws, 197 mm/150 mm calibration
4.5 mm/3.2 mm Double Drill Sleeve
5.5 mm/4.0 mm Double Drill Sleeve, veterinary
Holding Sleeve, for use with Hexagonal Screwdrivers
Large Hexagonal Screwdriver Shaft, quick coupling
Large Hexagonal Screwdriver
Depth Gauge
Articulated Tension Device, with gauge, span 20 mm
Ratchet Wrench, 11 mm width across flats
5.5 mm Universal Drill Guide
4.5 mm Universal Drill Guide
Illustrations not actual size
www.synthesvet.com
4/12
Instrument and
Implant Sets
103.531 Large Fragment Standard Instrument Set
1-22
Instrument and
Implant Sets
Large Fragment Locking Instrument Set
103.532 Large Fragment Locking Instrument Set
310.431
311.449
312.449
314.118
314.119
397.705
511.771
Instruments
4.3 mm Drill Bit, quick coupling, 180 mm, for 5.0 mm Locking Screws
Push-Pull Reduction Device, for use with 4.5 mm LCP Plates
4.3 mm Threaded Drill Guide, 3 ea.
StarDrive Screwdriver, T25, self-retaining, 245 mm
StarDrive Screwdriver Shaft, T25, self-retaining, quick coupling, 165 mm
Handle, quick coupling
Torque Limiting Attachment, 4 Nm
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-23
Large Fragment LC-DCP Plate Set
690.543
Large Fragment Plate Set Graphic Case
03.100.049
329.92
329.97
329.99
Instruments
Bending Template, 16 holes, for 4.5 mm/5.5 mm LCP and LC-DCP Plates
Bending Template, 12 holes, 205 mm, for 4.5 mm LC-DCP and DCP Plates
Bending Template, 7 holes, 126 mm, for 4.5 mm LC-DCP and DCP Plates
Bending Template, 9 holes, 155 mm, for 4.5 mm LC-DCP and DCP Plates
VP3060.03–
VP3060.12
Implants
4.5 mm Narrow LC-DCP Plates,
1 ea.: 3, 4, 5, 6, 7, 8, 9, 10 and 12 holes
VP3070.07–
VP3070.14
4.5 mm Broad LC-DCP Plates
1 ea.: 7, 8, 9, 10, 11, 12 and 14 holes
Illustrations not actual size
www.synthesvet.com
4/12
Instrument and
Implant Sets
103.534 Large Fragment LC-DCP Plate Set
1-24
Instrument and
Implant Sets
Large Fragment LCP Plate Set
103.535 Large Fragment LCP Plate Set
690.543
Large Fragment Plate Set Graphic Case
03.100.049
329.92
329.97
329.99
Instruments
Bending Template, 16 holes, for 4.5 mm/5.5 mm LCP and LC-DCP Plates
Bending Template, 12 holes, 205 mm, for 4.5 mm LC-DCP and DCP Plates
Bending Template, 7 holes, 126 mm, for 4.5 mm LC-DCP and DCP Plates
Bending Template, 9 holes, 155 mm, for 4.5 mm LC-DCP and DCP Plates
VP4051.03–
VP4051.12
Implants
4.5 mm Narrow LCP Plates,
1 ea.: 3, 4, 5, 6, 7, 8, 9, 10 and 12 holes
VP4061.10–
VP4061.12
4.5 mm Broad LCP Plates
1 ea.: 10 and 12 holes
VP4071.11–
VP4071.14
5.5 mm Broad LCP Plates
1 ea.: 11, 12, 13 and 14 holes
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-25
Large Fragment Standard 5.5 mm Screw Set
690.546
Large Fragment Standard 5.5 mm Screw Set Graphic Case
VS501.024–
VS501.100
Implants
5.5 mm Cortex Screws
1 ea.: 24, 26, 64, 70, 80, 90 and 100 mm
3 ea.: 28 mm–60 mm (2 mm increments)
Illustrations not actual size
www.synthesvet.com
4/12
Instrument and
Implant Sets
103.536 Large Fragment Standard 5.5 mm Screw Set
1-26
Instrument and
Implant Sets
Large Fragment Standard 4.5 mm Screw Set
103.537 Large Fragment Standard 4.5 mm Screw Set
690.547
Large Fragment Standard 4.5 mm/6.5 mm Screw Set Graphic Case
VP1300.04
VP1300.05
Implants
Washer, 10.0 mm, for 4.5 mm Cannulated Screws, 2 ea.
Washer, 13.0 mm, for 4.5 mm Cortex and 6.5 mm Cancellous Bone Screws, 2 ea.
VS402.018–
VS402.060
4.5 mm Cortex Screws
2 ea.: 18 mm–28 mm (2 mm increments) and 60 mm
4 ea.: 30 mm–58 mm (2 mm increments)
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-27
Large Fragment Locking Screw Set
690.548
Large Fragment Locking 4.0 mm/5.0 mm Screw Set Graphic Case
VS502.024–
VS502.075
Implants
5.0 mm Locking Screws, self-tapping, with T25 StarDrive recess
2 ea.: 24, 26, 28, 55, 60, 65, 70 and 75 mm
4 ea.: 30 mm–50 mm (2 mm increments)
Illustrations not actual size
www.synthesvet.com
4/12
Instrument and
Implant Sets
103.538 Large Fragment Locking Screw Set
1-28
Instrument and
Implant Sets
Equine General Instrument Set
103.49 Equine General Instrument Set
399.051
399.22
399.25
399.42
399.54
399.55
399.56
399.57
399.98
Instruments
Reduction Forceps, with serrated jaw, 240 mm, speed lock
Hohmann Retractor, 43 mm width, narrow tip
Hohmann Retractor, 22 mm width, wide tip
Hammer, 500 grams
Chisel Handle
Chisel Blade, 10 mm
Chisel Blade, 16 mm
Chisel Blade, 25 mm
Reduction Forceps, with points, 205 mm, ratchet
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-29
Reduction Instrument Set
398.811
399.06
399.21
399.35
399.97
399.98
Plate Holding Forceps with swivel foot, size 0
Reduction Forceps, 180 mm length, speed lock
Hohmann Retractor, 18 mm width, short narrow tip, 2 ea.
Periosteal Elevator, 14 mm width, curved blade, round edge
Reduction Forceps, with points, 130 mm length, ratchet
Reduction Forceps, with points, 205 mm length, ratchet
Illustrations not actual size
www.synthesvet.com
4/12
Instrument and
Implant Sets
103.50 Reduction Instrument Set
1-30
Instrument and
Implant Sets
Wire Instrument and Implant Set
103.60 Wire Instrument and Implant Set
391.09
391.21
391.90
Instruments
Wire Passer, veterinary
Wire Tightener, with handle and two pegs, 240 mm length
Small Wire Cutter, 160 mm length
VW0801.28
VW1001.28
VW1201.28
Implants
Cerclage Wire, with eye, 280 mm length
0.8 mm dia.,1 pkg./10
1.0 mm dia.,1 pkg./10
1.25 mm dia.,1 pkg./10
VW1002.10
1.0 mm Cerclage Wire Coil, 10 meters
VW1203.15
VW2003.15
VW2503.15
Kirschner Wires, 150 mm, trocar point
1.25 mm dia., 1 pkg./10
2.0 mm dia., 1 pkg./10
2.5 mm dia., 1 pkg./10
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-31
Screw Removal Set
60.240.001
Graphic Case for Screw Removal Set
03.607.025
03.607.035
03.607.040
03.607.048
03.607.060
03.607.104
03.607.106
03.607.110
03.900.001
03.900.002
03.900.011
03.900.013
03.900.022
03.900.032
03.900.042
03.900.044
309.035
309.039
309.065
309.069
309.090
309.150
309.190
309.200
309.250
309.290
309.450
Instruments
2.5 mm Drill Sleeve Clip-on, for use with Drill Suction Device
3.5 mm Drill Sleeve Clip-on, for use with Drill Suction Device
4.0 mm Drill Sleeve Clip-on, for use with Drill Suction Device
4.8 mm Drill Sleeve Clip-on, for use with Drill Suction Device
6.0 mm Drill Sleeve Clip-on, for use with Drill Suction Device
4.0 mm Carbide Drill Bit Extension
6.0 mm Carbide Drill Bit Extension
Drill Suction Device
Straight Sharp Hook
AO Coupling Extension Shaft
Small Screw Removal Forceps
Large Screw Removal Forceps
2.4 mm Cruciform Screwdriver Shaft, 100 mm
4.0 mm Hex Screwdriver Shaft, 100 mm
T25 StarDrive Screwdriver Shaft, 100 mm
T40 StarDrive Screwdriver Shaft, 100 mm
Hollow Reamer, for 3.5 mm Cortex, 3.5 mm Cannulated and 4.0 mm Cancellous Bone Screws, complete
Extraction Bolt, for 3.5 mm Cortex, 3.5 mm Cannulated and 4.0 mm Cancellous Bone Screws
Hollow Reamer, for 6.5 mm Cancellous Bone and 7.0 mm Cannulated Screws, complete
Extraction Bolt, for 6.5 mm Cancellous Bone and 7.0 mm Cannulated Screws
Extraction Bolt, for 1.5 mm screws
Hollow Reamer, complete, for 1.5 mm screws
Extraction Bolt, for 2.0 mm screws
Hollow Reamer, complete, for 2.0 mm screws
Hollow Reamer, complete, for 2.7 mm screws
Extraction Bolt, for 2.7 mm screws
Hollow Reamer, complete, for 4.5 mm screws
Illustrations not actual size
www.synthesvet.com
4/12
Instrument and
Implant Sets
01.240.001 Screw Removal Set
1-32
Instrument and
Implant Sets
Screw Removal Set
01.240.001 Screw Removal Set— continued
309.490
309.501
309.510
309.520
309.521
309.530
310.89
310.95
310.99
311.01
311.431
313.822
313.832
313.842
313.93
313.991
313.992
313.993
314.03
314.116
314.119
314.13
314.15
314.451
314.464
314.465
319.39
387.34
393.105
398.65
398.651
399.68
Instruments—continued
Extraction Bolt, for 4.5 mm screws
Conical Extraction Device, for Threaded Washers
Conical Extraction Screw, for 1.5 mm and 2.0 mm Cortex Screws
Conical Extraction Screw, for 2.7 mm and 3.5 mm Cortex Screws
Conical Extraction Screw for 3.5 mm Screws
Conical Extraction Screw, for Large Screws and 4.9 mm Bolts
Countersink, for 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws, for use with Handle (311.43) or
T-Handle (311.44)
Handle, with mini quick coupling, stainless steel
Countersink, for 4.5 mm Cortex and 6.5 mm Cancellous Bone Screws
Handle, with mini quick coupling
Large Handle with quick coupling
1.3 mm Screwdriver Blade, Self-Retaining, StarDrive, short
1.5 mm Screwdriver Blade, self-retaining, StarDrive, short
2.0 mm Screwdriver Blade, self-retaining, StarDrive, short
Solid Hexagonal Screwdriver, 4.0 mm width across flats, for removal of 7.3 mm Cannulated Screws
1.0 mm Cruciform Screwdriver Shaft, self-retaining
1.3 mm Cruciform Screwdriver Shaft, self-retaining
1.5 mm/2.0 mm Cruciform Screwdriver Shaft, self-retaining
Small Hexagonal Screwdriver Shaft
StarDrive Screwdriver Shaft, T15, self-retaining, quick coupling
StarDrive Screwdriver Shaft, T25, self-retaining, quick coupling, 165 mm
Large Hexagonal Screwdriver with T-Handle
Large Hexagonal Screwdriver Shaft
2.4 mm StarDrive Screwdriver Shaft
Cannulated Driver, for Threaded Washers, for 3.0 mm Cannulated Screws
Cruciform Screwdriver Shaft, quick coupling, for 3.0 mm Cannulated Screws
Sharp Hook
Conical Extraction Screw
Small Universal Chuck with T-Handle
Forceps, for broken screw removal
Narrow Screw Removal Pliers
Hollow Gouge, for broken screw exposure, 205 mm length
Also available: Spare Centering Pins (309.070–309.670)
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
1-33
Combined Aiming Device Set
301.31
Aluminum Case
310.21
310.29
310.37
310.48
310.60
2.0 mm Drill Bit, quick coupling, 125 mm, 2 ea.
3.2 mm Drill Bit, quick coupling, 195 mm, 2 ea.
3.5 mm Drill Bit, quick coupling, 195 mm, 2 ea.
4.5 mm Drill Bit, quick coupling, 195 mm, 2 ea.
6.0 mm Drill Bit, quick coupling, 195 mm, 2 ea.
333.31
333.32
333.33
333.34
333.42
3.5 mm Drill Sleeve
2.0 mm Drill Sleeve
3.2 mm Drill Sleeve
4.5 mm Drill Sleeve
2.0 mm Drill Sleeve, with two parallel holes
333.35
333.36
333.37
333.38
333.39
333.40
333.41
333.53
391.15
391.16
Small Pointed Hook
Locking Sleeve
Measuring Bar
Offset Pointed Hook
Forked Impactor
Hook, for external fixator
Large Hook, for knee
Check Tube
Suture Pusher
2.0 mm Suture Passer, 2 ea.
Also available: Combined Aiming Device Set (130.30J)
With standard drill bits 310.21J, 310.30, 310.38, 310.49, and 310.60J to fit Jacobs chuck
Illustrations not actual size
www.synthesvet.com
4/12
Instrument and
Implant Sets
130.30 Combined Aiming Device Set
2-1
Screws
Cortex Screws
1.5 mm Cortex Screws
with cruciform recess
Total Length
6 mm
7
8
9
10
11
12
14
16
18
20
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
1.5 mm
0.5 mm
1.1 mm
3.0 mm
Drill bit for:
Threaded hole
Gliding hole
1.1 mm
1.5 mm
Total Length
13 mm
14
16
18
20
22
24
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
1.5 mm
0.5 mm
1.1 mm
3.0 mm
Drill bit for:
Threaded hole
Gliding hole
1.1 mm
1.5 mm
Total Length
24 mm
26
28
30
32
34
36
38
40
Dia. of Thread
Thread pitch
Dia. of core
Dia. of head
2.0 mm
0.6 mm
1.4 mm
3.5 mm
Drill bit for:
Threaded hole
Gliding hole
1.5 mm
2.0 mm
1.5 mm Cortex Screws, self-tapping
with cruciform recess
VS102.006
VS102.007
VS102.008
VS102.009
VS102.010
VS102.011
VS102.012
Total Length
6 mm
7
8
9
10
11
12
VS102.013
VS102.014
VS102.016
VS102.018
VS102.020
VS102.022
VS102.024
For 1.5 mm Cortex Screws:
Use Washer, 4.5 mm (VP1300.01).
2.0 mm Cortex Screws
with cruciform recess
VS201.006
VS201.008
VS201.010
VS201.012
VS201.014
VS201.016
VS201.018
VS201.020
VS201.022
Total Length
6 mm
8
10
12
14
16
18
20
22
VS201.024
VS201.026
VS201.028
VS201.030
VS201.032
VS201.034
VS201.036
VS201.038
VS201.040
For 2.0 mm Cortex Screws:
Use Washer, 4.5 mm (VP1300.01).
Illustrations not actual size
www.synthesvet.com
4/12
Implants
VS101.006
VS101.007
VS101.008
VS101.009
VS101.010
VS101.011
VS101.012
VS101.014
VS101.016
VS101.018
VS101.020
2-2
Screws
Cortex Screws— continued
Implants
2.0 mm Cortex Screws, self-tapping
with cruciform recess
VS202.006
VS202.008
VS202.010
VS202.012
VS202.014
VS202.016
VS202.018
VS202.020
VS202.022
Total Length
6 mm
8
10
12
14
16
18
20
22
VS202.024
VS202.026
VS202.028
VS202.030
VS202.032
VS202.034
VS202.036
VS202.038
VS202.040
Total Length
24 mm
26
28
30
32
34
36
38
40
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
2.0 mm
0.6 mm
1.4 mm
3.5 mm
Drill bit for:
Threaded hole
Gliding hole
1.5 mm
2.0 mm
Total Length
20 mm
22
24
26
28
30
32
34
36
38
40
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
2.4 mm
1.0 mm
1.7 mm
4.0 mm
Drill bit for:
Threaded hole
Gliding hole
1.8 mm
2.4 mm
Total Length
28 mm
30
32
34
36
38
40
45
50
55
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
2.7 mm
1.0 mm
1.9 mm
5.0 mm
Drill bit for:
Threaded hole
Gliding hole
2.0 mm
2.7 mm
For 2.0 mm Cortex Screws:
Use Washer, 4.5 mm (VP1300.01).
2.4 mm Cortex Screws, self-tapping (4 mm head)
with cruciform recess
VS203.006
VS203.007
VS203.008
VS203.009
VS203.010
VS203.011
VS203.012
VS203.013
VS203.014
VS203.016
VS203.018
Total Length
6 mm
7
8
9
10
11
12
13
14
16
18
VS203.020
VS203.022
VS203.024
VS203.026
VS203.028
VS203.030
VS203.032
VS203.034
VS203.036
VS203.038
VS203.040
For 2.4 mm Cortex Screws:
Use Washer, 6.5 mm (VP1300.02).
2.7 mm Cortex Screws
with 2.5 mm hexagonal recess
VS204.006
VS204.008
VS204.010
VS204.012
VS204.014
VS204.016
VS204.018
VS204.020
VS204.022
VS204.024
VS204.026
Total Length
6 mm
8
10
12
14
16
18
20
22
24
26
VS204.028
VS204.030
VS204.032
VS204.034
VS204.036
VS204.038
VS204.040
VS204.045
VS204.050
VS204.055
For 2.7 mm Cortex Screws:
Use Washer, 7.0 mm (VP1300.03).
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-3
Screws
Cortex Screws— continued
2.7 mm Cortex Screws, self-tapping
with 2.5 mm hexagonal recess
Total Length
6 mm
8
10
12
14
16
18
20
22
24
26
28
30
VS205.032
VS205.034
VS205.036
VS205.038
VS205.040
VS205.042
VS205.044
VS205.045
VS205.046
VS205.048
VS205.050
VS205.055
Total Length
32 mm
34
36
38
40
42
44
45
46
48
50
55
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
2.7 mm
1.0 mm
1.9 mm
5.0 mm
Drill bit for:
Threaded hole
Gliding hole
2.0 mm
2.7 mm
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
3.5 mm
1.25 mm
2.4 mm
6.0 mm
Drill bit for:
Threaded hole
Gliding hole
2.5 mm
3.5 mm
Use Washer, 7.0 mm (VP1300.03), or
Spiked Washer, 8.0 mm/3.2 mm (VP1301.01), see page 2-32.
3.5 mm Cortex Screws
with 2.5 mm hexagonal recess
VS301.010
VS301.012
VS301.014
VS301.016
VS301.018
VS301.020
VS301.022
VS301.024
VS301.026
VS301.028
VS301.030
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
VS301.032
VS301.034
VS301.036
VS301.038
VS301.040
VS301.045
VS301.050
VS301.055
VS301.060
VS301.065
VS301.070
Total Length
32 mm
34
36
38
40
45
50
55
60
65
70
For 3.5 mm Cortex Screws:
Use Washer, 7.0 mm (VP1300.03), or
Spiked Washer, 13.5 mm/4.0 mm (VP1301.02), see page 2–32.
Illustrations not actual size
www.synthesvet.com
4/12
Implants
VS205.006
VS205.008
VS205.010
VS205.012
VS205.014
VS205.016
VS205.018
VS205.020
VS205.022
VS205.024
VS205.026
VS205.028
VS205.030
2-4
Screws
Cortex Screws— continued
Implants
3.5 mm Cortex Screws, self-tapping
with 2.5 mm hexagonal recess
VS302.010
VS302.012
VS302.014
VS302.016
VS302.018
VS302.020
VS302.022
VS302.024
VS302.026
VS302.028
VS302.030
VS302.032
VS302.034
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
34
VS302.036
VS302.038
VS302.040
VS302.042
VS302.044
VS302.045
VS302.046
VS302.048
VS302.050
VS302.055
VS302.060
VS302.065
VS302.070
Total Length
36 mm
38
40
42
44
45
46
48
50
55
60
65
70
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
3.5 mm
1.25 mm
2.4 mm
6.0 mm
Drill bit for:
Threaded hole
Gliding hole
2.5 mm
3.5 mm
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
4.5 mm
1.75 mm
3.0 mm
8.0 mm
Drill bit for:
Threaded hole
Gliding hole
3.2 mm
4.5 mm
For 3.5 mm Cortex Screws:
Use Washer, 7.0 mm (VP1300.03), or
Spiked Washer, 13.5 mm/4.0 mm (VP1301.02), see page 2–32.
4.5 mm Cortex Screws
with 3.5 mm hexagonal recess
VS401.014
VS401.016
VS401.018
VS401.020
VS401.022
VS401.024
VS401.026
VS401.028
VS401.030
VS401.032
VS401.034
VS401.036
VS401.038
VS401.040
VS401.042
VS401.044
VS401.046
VS401.048
Total Length
14 mm
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
VS401.050
VS401.052
VS401.054
VS401.056
VS401.058
VS401.060
VS401.062
VS401.064
VS401.066
VS401.068
VS401.070
VS401.072
VS401.076
VS401.080
VS401.085
VS401.090
VS401.095
VS401.100
Total Length
50 mm
52
54
56
58
60
62
64
66
68
70
72
76
80
85
90
95
100
For 4.5 mm Cortex Screws:
Use Washer, 10.0 mm (VP1300.04), or
Washer, 13.0 mm (VP1300.05), see page 2–32.
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-5
Screws
Cortex Screws— continued
4.5 mm Cortex Screws, self-tapping
with 3.5 mm hexagonal recess
Total Length
14 mm
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
VS402.050
VS402.052
VS402.054
VS402.056
VS402.058
VS402.060
VS402.062
VS402.064
VS402.066
VS402.068
VS402.070
VS402.072
VS402.076
VS402.080
VS402.085
VS402.090
VS402.095
VS402.100
Total Length
50 mm
52
54
56
58
60
62
64
66
68
70
72
76
80
85
90
95
100
Dia. of Thread
Thread pitch
Dia. of core
Dia. of head
4.5 mm
1.75 mm
3.0 mm
8.0 mm
Drill bit for:
Threaded hole
Gliding hole
3.2 mm
4.5 mm
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
5.5 mm
2.0 mm
3.8 mm
8.0 mm
Drill bit for:
Threaded hole
Gliding hole
4.0 mm
5.5 mm
For 4.5 mm Cortex Screws:
Use Washer, 10.0 mm (VP1300.04), or Washer, 13.0 mm (VP1300.05).
Use Nut for 4.5 mm Cortex Screws (VP1302.01), see page 2–32.
5.5 mm Cortex Screws
with 3.5 mm hexagonal recess
VS501.024
VS501.026
VS501.028
VS501.030
VS501.032
VS501.034
VS501.036
VS501.038
VS501.040
VS501.042
VS501.044
VS501.046
Total Length
24 mm
26
28
30
32
34
36
38
40
42
44
46
VS501.048
VS501.050
VS501.052
VS501.054
VS501.056
VS501.058
VS501.060
VS501.064
VS501.070
VS501.080
VS501.090
VS501.100
Total Length
48 mm
50
52
54
56
58
60
64
70
80
90
100
For 5.5 mm Cortex Screws:
Use Washer, 13.0 mm (VP1300.05), see page 2–32.
Illustrations not actual size
www.synthesvet.com
4/12
Implants
VS402.014
VS402.016
VS402.018
VS402.020
VS402.022
VS402.024
VS402.026
VS402.028
VS402.030
VS402.032
VS402.034
VS402.036
VS402.038
VS402.040
VS402.042
VS402.044
VS402.046
VS402.048
2-6
Screws
Cancellous Bone Screws
Implants
4.0 mm Cancellous Bone Screws, fully threaded
with 2.5 mm hexagonal recess
VS403.010
VS403.012
VS403.014
VS403.016
VS403.018
VS403.020
VS403.022
VS403.024
VS403.026
VS403.028
VS403.030
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
VS403.032
VS403.035
VS403.036
VS403.040
VS403.045
VS403.050
VS403.055
VS403.060
VS403.065
VS403.070
Total Length
32 mm
35
36
40
45
50
55
60
65
70
Dia. of Thread
Thread pitch
Dia. of core
Dia. of head
4.0 mm
1.75 mm
1.9 mm
6.0 mm
Drill bit for:
Threaded hole
2.5 mm
Dia. of thread
Thread pitch
Dia. of core
Dia. of shaft
Dia. of head
4.0 mm
1.75 mm
1.9 mm
2.4 mm
6.0 mm
Drill bit for:
Threaded hole
2.5 mm
4.0 mm Cancellous Bone Screws, partially threaded
with 2.5 mm hexagonal recess
VS404.010
VS404.012
VS404.014
VS404.016
VS404.018
VS404.020
VS404.022
VS404.024
VS404.026
VS404.028
Total Length
10 mm
12
14
16
18
20
22
24
26
28
VS404.030
VS404.035
VS404.040
VS404.045
VS404.050
VS404.055
VS404.060
VS404.065
VS404.070
Total Length
30 mm
35
40
45
50
55
60
65
70
For 4.0 mm Cancellous Bone Screws:
Use Washer, 10.0 mm (VP1300.04), see page 2–32.
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-7
Screws
Cancellous Bone Screws— continued
6.5 mm Cancellous Bone Screws, fully threaded
with 3.5 mm hexagonal recess
Total Length
20 mm
25
30
35
40
45
50
55
60
VS601.065
VS601.070
VS601.075
VS601.080
VS601.085
VS601.090
VS601.095
VS601.100
Total Length
65 mm
70
75
80
85
90
95
100
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
6.5 mm
2.75 mm
3.0 mm
8.0 mm
Drill bit for:
Threaded hole
3.2 mm
6.5 mm Cancellous Bone Screws, 16 mm thread length
with 3.5 mm hexagonal recess
VS602.030
VS602.035
VS602.040
VS602.045
VS602.050
VS602.055
VS602.060
VS602.065
Total Length
30 mm
35
40
45
50
55
60
65
VS602.070
VS602.075
VS602.080
VS602.085
VS602.090
VS602.095
VS602.100
Total Length
70 mm
75
80
85
90
95
100
Dia. of thread
Thread pitch
Dia. of core
Dia. of shaft
Dia. of head
6.5 mm
2.75 mm
3.0 mm
4.5 mm
8.0 mm
Drill bit for:
Threaded hole
3.2 mm
Gliding hole
4.5 mm
(in hard bone for shaft)
6.5 mm Cancellous Bone Screws, 32 mm thread length
with 3.5 mm hexagonal recess
VS603.045
VS603.050
VS603.055
VS603.060
VS603.065
VS603.070
Total Length
45 mm
50
55
60
65
70
VS603.075
VS603.080
VS603.085
VS603.090
VS603.095
VS603.100
Total Length
75 mm
80
85
90
95
100
For 6.5 mm Cancellous Bone Screws:
Use Washer, 13.0 mm (VP1300.05), or
Use Spiked Washer, 13.5 mm/6.5 mm (VP1301.03), see page 2–32.
Illustrations not actual size
www.synthesvet.com
4/12
Dia. of thread
Thread pitch
Dia. of core
Dia. of shaft
Dia. of head
6.5 mm
2.75 mm
3.0 mm
4.5 mm
8.0 mm
Drill bit for:
Threaded hole
3.2 mm
Gliding hole
4.5 mm
(in hard bone for shaft)
Implants
VS601.020
VS601.025
VS601.030
VS601.035
VS601.040
VS601.045
VS601.050
VS601.055
VS601.060
2-8
Screws
Locking Screws
Implants
2.0 mm Locking Screws, self-tapping,
with T6 StarDrive recess
VS207.006
VS207.007
VS207.008
VS207.009
VS207.010
VS207.011
VS207.012
VS207.013
VS207.014
Total Length
6 mm
7
8
9
10
11
12
13
14
VS207.016
VS207.018
VS207.020
VS207.022
VS207.024
VS207.026
VS207.028
VS207.030
Total Length
16 mm
18
20
22
24
26
28
30
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
2.0 mm
0.75 mm
1.4 mm
3.0 mm
Drill bit for:
Threaded hole
1.5 mm
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
2.4 mm
0.6 mm
1.9 mm
3.5 mm
Drill bit for:
Threaded hole
1.8 mm
2.4 mm Locking Screws, self-tapping,
with T8 StarDrive recess
VS208.006
VS208.007
VS208.008
VS208.009
VS208.010
VS208.011
VS208.012
VS208.013
VS208.014
Total Length
6 mm
7
8
9
10
11
12
13
14
VS208.016
VS208.018
VS208.020
VS208.022
VS208.024
VS208.026
VS208.028
VS208.030
Total Length
16 mm
18
20
22
24
26
28
30
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-9
Screws
Locking Screws— continued
2.7 mm Locking Screws, self-tapping
with T8 StarDrive recess
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
34
Dia. of thread
Thread pitch
Dia. of core
Dia. of head
2.7 mm
0.6 mm
2.1 mm
3.5 mm
Drill bit for:
Threaded hole
2.0 mm
Dia. of thread
Thread pitch
Dia. of core
3.5 mm
0.8 mm
2.9 mm
Drill bit for:
Threaded hole
2.8 mm
Refer to Synthes Trauma Catalog for additional lengths.
3.5 mm Locking Screws, self-tapping
with T15 StarDrive recess
VS303.010
VS303.012
VS303.014
VS303.016
VS303.018
VS303.020
VS303.022
VS303.024
VS303.026
VS303.028
VS303.030
VS303.032
VS303.034
Total Length
10 mm
12
14
16
18
20
22
24
26
28
30
32
34
Illustrations not actual size
www.synthesvet.com
4/12
VS303.036
VS303.038
VS303.040
VS303.042
VS303.045
VS303.048
VS303.050
VS303.052
VS303.055
VS303.060
VS303.065
VS303.070
Total Length
36 mm
38
40
42
45
48
50
52
55
60
65
70
Implants
VS206.010
VS206.012
VS206.014
VS206.016
VS206.018
VS206.020
VS206.022
VS206.024
VS206.026
VS206.028
VS206.030
VS206.032
VS206.034
2-10
Screws
Locking Screws— continued
Implants
4.0 mm Locking Screws, self-tapping
with T25 StarDrive recess
VS406.014
VS406.016
VS406.018
VS406.020
VS406.022
VS406.024
VS406.026
VS406.028
VS406.030
VS406.032
VS406.034
VS406.036
VS406.038
Total Length
14 mm
16
18
20
22
24
26
28
30
32
34
36
38
VS406.040
VS406.042
VS406.044
VS406.046
VS406.048
VS406.050
VS406.052
VS406.054
VS406.056
VS406.058
VS406.060
VS406.062
Total Length
40 mm
42
44
46
48
50
52
54
56
58
60
62
Dia. of thread
Thread pitch
Dia. of core
4.0 mm
1.0 mm
3.4 mm
Drill bit for:
Threaded hole
3.2 mm
Dia. of thread
Thread pitch
Dia. of core
5.0 mm
1.0 mm
4.4 mm
Drill bit for:
Threaded hole
4.3 mm
5.0 mm Locking Screws, self-tapping
with T25 StarDrive recess
VS502.014
VS502.016
VS502.018
VS502.020
VS502.022
VS502.024
VS502.026
VS502.028
VS502.030
VS502.032
VS502.034
VS502.036
VS502.038
VS502.040
Total Length
14 mm
16
18
20
22
24
26
28
30
32
34
36
38
40
VS502.042
VS502.044
VS502.046
VS502.048
VS502.050
VS502.055
VS502.060
VS502.065
VS502.070
VS502.075
VS502.080
VS502.085
VS502.090
Total Length
42 mm
44
46
48
50
55
60
65
70
75
80
85
90
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-11
Screws
Titanium Screws
2.0 mm Titanium Locking Screws, self-tapping, PlusDrive
Total Length
5 mm
6
8
10
VST202.012
VST202.014
VST202.016
VST202.018
Total Length
12 mm
14
16
18
Dia. of thread
Thread pitch
Dia. of core
2.0 mm
0.75 mm
2.9 mm
Drill bit for:
Threaded hole
2.4 mm
2.0 mm Titanium Cortex Screws, self-tapping, PlusDrive
VST201.006
VST201.008
Total Length
6 mm
8
Dia. of thread
Thread pitch
Dia. of core
2.0 mm
0.75 mm
1.7 mm
Drill bit for:
Threaded hole
Gliding hole
1.5 mm
2.0 mm
2.0 mm Titanium Cortex Screws, Coarse Pitch, self-tapping, PlusDrive
VST201.010
VST201.012
VST201.014
Total Length
10 mm
12
14
VST201.016
VST201.018
Total Length
16 mm
18
Dia. of thread
Thread pitch
Dia. of core
2.0 mm
1.0 mm
1.4 mm
Dia. of thread
Thread pitch
Dia. of core
2.0 mm
0.75 mm
1.4 mm
Drill bit for:
Threaded hole
1.5 mm
2.4 mm Titanium Emergency Screws, PlusDrive
VST203.006
VST203.008
VST203.010
VST203.012
Total Length
6 mm
8
10
12
Used for stripped 2.0 mm screws (VST201 series)
2.4 mm Titanium Cortex Screws, self-tapping, Cruciform Recess
VST211.008
VST211.010
VST211.012
VST211.014
VST211.016
Total Length
8 mm
10
12
14
16
VST211.018
VST211.020
VST211.022
VST211.024
Total Length
18 mm
20
22
24
Dia. of thread
Thread pitch
Dia. of core
2.4 mm
1.0 mm
1.7 mm
Drill bit for:
Threaded hole
Gliding hole
1.8 mm
2.4 mm
2.4 mm Titanium Locking Screws, self-tapping, Cruciform recess
VST212.008
VST212.010
VST212.012
VST212.014
Total Length
8 mm
10
12
14
VST212.016
VST212.018
VST212.020
VST212.022
Total Length
16 mm
18
20
22
Dia. of thread
Thread pitch
Dia. of core
2.4 mm
1.0 mm
1.7 mm
Drill bit for:
Threaded hole
1.8 mm
3.0 mm Titanium Locking Screws, self-tapping, Cruciform recess
VST311.008
VST311.010
VST311.012
VST311.014
Total Length
8 mm
10
12
14
Illustrations not actual size
www.synthesvet.com
4/12
VST311.016
VST311.018
VST311.020
VST311.022
Total Length
16 mm
18
20
22
Dia. of thread
Thread pitch
Dia. of core
3.0 mm
1.0 mm
2.4 mm
Drill bit for:
Threaded hole
2.4 mm
Implants
VST202.005
VST202.006
VST202.008
VST202.010
2-12
Plates
Round Hole Plates
1.5 mm Straight Plate*
Holes
Length
20
100 mm
Implants
VP1000.20
Profile
Width: 3.8 mm
Thickness: 0.8 mm
Distance between center of holes: 5.0 mm
For use with 1.5 mm Cortex Screws.
VP1010.03
VP1010.04
VP1010.05
VP1010.06
VP1010.20
2.0 mm Straight Plates
Holes
Length
3
17 mm
4
23
5
29
6
35
20
100
Profile
Width: 5.0 mm
Thickness: 1.0 mm
Distance between center of holes: 6.0 mm
For use with 2.0 mm Cortex Screws.
VP1010.50
2.0 mm/1.5 mm Cut-To-Length Plate*
Holes
Length
50
300 mm
Profile
Length: 300 mm
Width: 7 mm
Thickness: 1.0 mm
Distance between center of holes: 6.0 mm
For use with 1.5 mm and 2.0 mm Cortex Screws.
VP1030.50
2.7 mm/2.0 mm Cut-To-Length Plate*
Holes
Length
50
300 mm
Profile
Length: 300 mm
Width: 7 mm
Thickness: 1.5 mm
Distance between center of holes: 6.0 mm
For use with 2.0 mm and 2.7 mm Cortex Screws.
*Plate-Cutting Forceps (391.95) are recommended for cutting these plates to desired length. See page 3–31.
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-13
Plates
Round Hole Plates— continued
Profile
Width: 12.0 mm
Thickness: 3.8 mm
Distance between center of holes: 12.0 mm
For use with 4.5 mm Cortex Screws. 6.5 mm Cancellous Bone Screws can be used in the end holes of these plates.
VP1071.03
VP1071.04
VP1071.05
VP1071.06
VP1072.05
VP1072.06
VP1072.07
VP1072.08
VP1072.09
VP1072.10
VP1072.11
VP1072.12
4.5 mm Broad Lengthening Plates
Holes
Length
8
135 mm
8
145
8
155
8
165
10
179
10
189
10
199
10
209
10
219
10
229
10
239
10
249
Profile
Width: 16.0 mm
Thickness: 4.8 mm
Distance between center holes: 12.0 mm
For use with 4.5 mm Cortex Screws. 6.5 mm Cancellous Bone Screws can be used in the end holes of these plates.
VP1220.05
VP1220.06
VP1220.08
VP1220.10
VP1220.12
VP1220.14
VP1220.16
VP1220.18
VP1220.20
VP1220.22
VP1220.24
2.7 mm Reconstruction Plate
Holes
Length
5
40 mm
6
48
8
64
10
80
12
96
14
112
16
128
18
144
20
160
22
176
24
192
Illustrations not actual size
www.synthesvet.com
4/12
Profile
Width: 8.0 mm
Thickness: 3.3 mm
Distance between center of holes: 8.0 mm
Implants
VP1061.03
VP1061.04
VP1061.05
VP1061.06
VP1061.07
VP1061.08
4.5 mm Narrow Lengthening Plates, 8 holes
Length
135 mm
145
155
165
175
185
2-14
Plates
Implants
Round Hole Plates— continued
VP1230.04
VP1230.05
VP1230.06
VP1230.07
VP1230.08
VP1230.09
VP1230.10
VP1230.11
VP1230.12
VP1230.13
VP1230.14
VP1230.15
VP1230.16
VP1230.18
VP1230.20
VP1230.22
3.5 mm Reconstruction Plates
Holes
Length
4
46 mm
5
58
6
70
7
82
8
94
9
106
10
118
11
130
12
142
13
154
14
166
15
178
16
190
18
214
20
238
22
262
Profile
Width: 10.0 mm
Thickness: 2.8 mm
Distance between center of holes: 12.0 mm
For use with 3.5 mm Cortex Screws.
VP1231.06
VP1231.08
VP1231.10
VP1231.12
VP1231.14
VP1231.16
VP1231.18
3.5 mm Curved Reconstruction Plates
Holes
6
8
10
12
14
16
18
Profile
Width: 10.0 mm
Thickness: 3.6 mm
Radius of curvature: 100 mm
Distance between center of holes: 12.0 mm
For use with 3.5 mm Cortex Screws.
VP1313.09
VP1314.09
1.5 mm T-Plates, 9 holes in shaft, 50 mm
Head
3 holes
4
Profile
Width of shaft: 3.8 mm
Thickness: 0.9 mm
Distance between center of holes: 5.0 mm
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-15
Plates
Round Hole Plates— continued
VP1322.02
2.0 mm T-Plate, 2 holes in shaft, 18 mm
2 holes in head
For use with 2.0 mm Cortex Screws.
VP1322.04
VP1322.08
2.0 mm/1.5 mm T-Plates, 2 holes in head
Shaft
Length
4 holes
34 mm
8
62 Cut-To-Length
Profile
Thickness: 1.5 mm
Width of T-head: 9.0 mm
Width of plate shaft: 5.0 mm
Distance between center of holes: 7.0 mm
For use with 1.5 mm and 2.0 mm Cortex Screws.
VP1323.09
VP1324.09
2.0 mm T-Plates, 9 holes in shaft, 50 mm
Head
3 holes
4
Profile
Width: 5.0 mm
Thickness: 1.1 mm
Distance between center of holes: 5.0 mm
For use with 2.0 mm Cortex Screws.
VP1332.03
2.7 mm T-Plate, 2 holes in head, 32 mm
3 holes in shaft
Profile
Width: 7.0 mm
Width of head: 13.7 mm
Thickness: 1.2 mm
Distance between center of holes: 8.0 mm
For use with 2.7 mm Cortex Screws.
Illustrations not actual size
www.synthesvet.com
4/12
Implants
Profile
Width of shaft: 5.0 mm
Width of head: 11.0 mm
Thickness: 1.0 mm
Distance between center of holes: 6.0 mm
2-16
Plates
Round Hole Plates— continued
Implants
VP1342.05
VP1342.07
VP1342.09
3.5 mm/2.7 mm T-Plates
Shaft
Head
Length
5 holes
2 holes
65 mm
7
2
85
9
2
105
Profile
Thickness: 2.0 mm
Width of T-head: 18.0 mm
Width of plate shaft: 9.0 mm
For use with 2.7 mm and 3.5 mm Cortex Screws.
VP1343.03
VP1343.05
VP1344.04
VP1344.06
VP1344.07
VP1344.08
VP1344.09
3.5 mm T-Plates, right angle
Head
Shaft
Width of shaft
3 holes
3 holes
10.0 mm
3
5
10.0
4
4
11.0
4
6
11.0
4
7
11.0
4
8
11.0
4
9
11.0
Width of head
24.0 mm
24.0
31.0
31.0
31.0
Profile
31.0
Thickness: 1.2 mm
31.0
Distance between center of holes: 11.0 mm
For use with 3.5 mm Cortex Screws.
VP1352.03
VP1352.04
VP1352.05
VP1352.06
VP1352.08
VP1352.11
VP1352.12
4.5 mm T-Plates
Shaft
Head
3 holes
2 holes
4
2
5
2
6
2
8
2
11
2
12
2
Length
68 mm
84
100
116
148
198
210
For use with 4.5 mm Cortex Screws.
VP1370.L2
VP1370.R2
VP1371.L2
VP1371.R2
2.0 mm L-Plates, 2 shaft holes
Length
17 mm
left
17
right
20
oblique left
20
oblique right
For use with 2.0 mm Cortex Screws.
Profile
Width of shaft: 17.0 mm
Width of head: 34.0 mm
Thickness: 2 mm
Distance between center of holes: 16.0 mm
Profile
Width of shaft: 5.0 mm
Width of head: 11.0 mm
Thickness: 1.0 mm
Distance between holes: 6.0 mm
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-17
Plates
Round Hole Plates— continued
VP1380.L3
VP1380.R3
VP1381.L3
VP1381.R3
2.7 mm L-Plates, 3 shaft holes
32 mm
left
32
right
34
oblique left
34
oblique right
VP1410.04
1.5 mm H-Plate, 4 holes, 4.2 mm
For use with 1.5 mm Cortex Screws.
VP1420.04
Profile
Length: 9.0 mm
Width: 8.2 mm
Distance between center of holes: 5.0 mm length
4.2 mm width
Thickness: 0.9 mm
2.0 mm H-Plate, 4 holes, 6 mm
Profile
Length: 12.0 mm
Width: 11.0 mm
Distance between center of holes: 7.0 mm length
6.0 mm width
Thickness: 0.9 mm
For use with 2.0 mm Cortex Screws.
Illustrations not actual size
www.synthesvet.com
4/12
Implants
For use with 2.7 mm Cortex Screws.
Profile
Width of shaft: 7.0 mm
Width of head: 14.0 mm
Thickness: 1.0 mm
Distance between center of holes: 8.0 mm
2-18
Plates
Implants
DCP Plates
VP2010.04
VP2010.05
VP2010.06
VP2011.06
VP2011.07
VP2011.08
2.0 mm DCP Plates
Holes
Length
4
22 mm
5
27
6
32
6
32
7
37
8
42
Thickness
1.0 mm
1.0
1.0
1.5
1.5
1.5
Profile
Width: 5.0 mm
Distance between center of holes: 5.0 mm
Distance between central holes: 7.0 mm
For use with 2.0 mm Cortex Screws.
VP2030.02
VP2030.04
VP2030.05
VP2030.06
VP2030.07
VP2030.08
VP2030.09
VP2030.10
VP2030.12
2.7 mm DCP Plates
Holes
Length
2
20 mm
4
36
5
44
6
52
7
60
8
68
9
76
10
84
12
100
Thickness
2.0 mm
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
Profile
Width: 8.0 mm
Distance between center of holes: 8.0 mm
Distance between central holes: 12.0 mm
For use with 2.7 mm Cortex Screws.
VP2040.02
VP2040.03
VP2040.04
VP2040.05
VP2040.06
VP2040.07
VP2040.08
VP2040.09
VP2040.10
VP2040.12
VP2040.14
VP2040.16
VP2040.18
VP2040.20
VP2040.22
3.5 mm DCP Plates
Holes
Length
2
25 mm
3
37
4
49
5
61
6
73
7
85
8
97
9
109
10
121
12
145
14
169
16
194
18
217
20
242
22
265
Profile
Width: 10.0 mm
Thickness: 3.3 mm
Distance between center of holes: 12.0 mm
Distance between central holes: 16.0 mm
For use with 3.5 mm Cortex Screws.
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-19
Plates
DCP Plates— continued
Implants
VP2050.07
VP2050.08
VP2050.09
VP2050.10
VP2050.11
VP2050.12
VP2050.13
VP2050.14
VP2050.16
VP2050.18
VP2050.20
VP2050.22
3.5 mm Broad DCP Plates
Holes
Length
7
86 mm
8
98
9
110
10
122
11
134
12
146
13
158
14
170
16
194
18
218
20
242
22
266
Profile
Thickness: 3.6 mm
Width: 12.0 mm
Distance between center of holes: 12.0 mm
Distance between central holes: 16.0 mm
For use with 3.5 mm Cortex Screws.
VP2060.02
VP2060.03
VP2060.04
VP2060.05
VP2060.06
VP2060.07
VP2060.08
VP2060.09
VP2060.10
VP2060.11
4.5 mm Narrow DCP Plates
Holes
Length
VP2060.12
2
39 mm
VP2060.13
3
55
VP2060.14
4
71
VP2060.15
5
87
VP2060.16
6
103
VP2060.18
7
119
VP2060.20
8
135
VP2060.22
9
151
VP2060.24
10
167
11
183
Holes
12
13
14
15
16
18
20
22
24
Length
199 mm
215
231
247
263
295
326
358
390
Profile
Width: 12.0 mm
Thickness: 3.8 mm
Distance between center of holes: 16.0 mm
Distance between central holes: 25.0 mm
For use with 4.5 mm Cortex Screws.
VP2070.06
VP2070.07
VP2070.08
VP2070.09
VP2070.10
VP2070.12
VP2070.14
VP2070.16
VP2070.18
VP2070.20
VP2070.22
VP2070.24
VP2070.26
4.5 mm Broad DCP Plates
Holes
Length
6
103 mm
7
119
8
135
9
151
10
167
12
199
14
231
16
263
18
295
20
326
22
358
24
390
26
423
For use with 4.5 mm Cortex Screws.
Illustrations not actual size
www.synthesvet.com
4/12
Profile
Width: 16.0 mm
Thickness: 4.8 mm
Distance between center of holes: 16.0 mm
Distance between central holes: 25.0 mm
2-20
Plates
DCP Plates— continued
Implants
VP2500.06
2.0 mm Acetabular Plate, 6 holes, 25 mm
For use with 2.0 mm Cortex Screws.
VP2501.05
2.7 mm Acetabular Plate, 5 holes, 45 mm
For use with 2.7 mm Cortex Screws.
VP2510.L5
VP2510.L6
VP2510.R5
VP2510.R6
2.7 mm Triple Osteotomy Plates, 45°
Holes
Length
5
45 mm
left
6
53
left
5
45
right
6
53
right
For use with 2.7 mm Cortex Screws.
VP2511.L5
VP2511.L6
VP2511.R5
VP2511.R6
3.5 mm Triple Osteotomy Plates, 45°
Holes
Length
5
63 mm
left
6
75
left
5
63
right
6
75
right
For use with 3.5 mm Cortex Screws.
VP2520.05
VP2520.07
Profile
Width: 5 mm
Hole spacing: 15° (5 mm)
Profile
Width: 8 mm
Hole spacing: 20.5° (9.6 mm)
Profile
Width: 8 mm
Distance between holes: 8 mm
Distance between central holes: 13 mm
Profile
Width: 10 mm
Distance between holes: 16.0 mm
Distance between central holes: 17 mm
4.0 mm/3.5 mm Double Hook Plates
Holes
Length
5
84 mm
7
116
For use with 3.5 mm Cortex and
4.0 mm Cancellous Bone Screws.
Profile
Width: 12.0 mm
Thickness: 3.8 mm
Distance between holes: 16.0 mm
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-21
Plates
LC-DCP Plates
Profile
Width: 5.5 mm
Thickness: 1.2 mm
Distance between holes: 6.0 mm
VP3012.06
VP3012.07
VP3012.08
VP3012.09
VP3012.10
VP3012.12
VP3012.14
Holes
6
7
8
9
10
12
14
Profile
Width: 5.5 mm
Thickness: 1.5 mm
Distance between holes: 6.0 mm
Length
37 mm
43
49
55
61
73
85
For use with 1.5 mm or 2.0 mm Cortex Screws.
VP3021.04
VP3021.05
VP3021.06
VP3021.07
VP3021.08
2.4 mm/2.0 mm LC-DCP Plates
Holes
Length
4
33 mm
5
41
6
49
7
57
8
65
Profile
Width: 6.5 mm
Thickness: 1.7 mm
Distance between holes: 8.0 mm
VP3022.08
VP3022.09
VP3022.10
VP3022.12
VP3022.14
Holes
8
9
10
12
14
Profile
Width: 6.5 mm
Thickness: 2.0 mm
Distance between holes: 8.0 mm
Length
65 mm
73
81
97
113
For use with 2.0 mm or 2.4 mm Cortex Screws.
VP3031.04
VP3031.05
VP3031.06
VP3031.07
VP3031.08
VP3031.09
VP3031.10
VP3031.11
VP3031.12
VP3031.14
VP3031.16
2.7 mm LC-DCP Plates
Holes
Length
4
37 mm
5
46
6
55
7
64
8
73
9
82
10
91
11
100
12
109
14
127
16
145
For use with 2.7 mm Cortex Screws.
Illustrations not actual size
www.synthesvet.com
4/12
Profile
Width: 7.5 mm
Thickness: 2.6 mm
Distance between holes: 9.0 mm
Implants
VP3011.04
VP3011.05
VP3011.06
VP3011.07
2.0 mm/1.5 mm LC-DCP Plates
Holes
Length
4
25 mm
5
31
6
37
7
43
2-22
Plates
Implants
LC-DCP Plates— continued
VP3041.02
VP3041.03
VP3041.04
VP3041.05
VP3041.06
VP3041.07
VP3041.08
VP3041.09
VP3041.10
VP3041.11
VP3041.12
VP3041.14
VP3041.15
VP3041.16
VP3041.18
VP3041.20
VP3041.22
3.5 mm LC-DCP Plates
Holes
Length
2
28 mm
3
41
4
54
5
67
6
80
7
93
8
106
9
119
10
132
11
145
12
158
14
184
15
197
16
210
18
236
20
262
22
288
Profile
Width: 11.0 mm
Thickness: 3.3 mm
Distance between center of holes: 13.0 mm
For use with 3.5 mm Cortex Screws.
VP3051.07
VP3051.08
VP3051.09
VP3051.10
VP3051.11
VP3051.12
VP3051.13
VP3051.14
VP3051.15
VP3051.16
VP3051.17
VP3051.18
VP3051.20
VP3051.22
3.5 mm Broad LC-DCP Plates
Holes
Length
7
94 mm
8
107
9
120
10
133
11
146
12
159
13
172
14
185
15
198
16
211
17
224
18
237
20
263
22
289
Profile
Width: 13.5 mm
Thickness: 4.2 mm
Distance between holes: 13.0 mm
For use with 3.5 mm Cortex Screws.
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-23
Plates
LC-DCP Plates— continued
Implants
VP3060.02
VP3060.03
VP3060.04
VP3060.05
VP3060.06
VP3060.07
VP3060.08
VP3060.09
VP3060.10
VP3060.11
VP3060.12
VP3060.13
VP3060.14
VP3060.15
VP3060.16
VP3060.18
VP3060.20
VP3060.22
4.5 mm Narrow LC-DCP Plates
Holes
Length
2
34 mm
3
52
4
70
5
88
6
106
7
124
8
142
9
160
10
178
11
196
12
214
13
232
14
250
15
268
16
286
18
323
20
358
22
394
Profile
Width: 13.5 mm
Thickness: 4.2 mm
Distance between center of holes: 18.0 mm
For use with 4.5 mm Cortex Screws.
VP3070.06
VP3070.07
VP3070.08
VP3070.09
VP3070.10
VP3070.11
VP3070.12
VP3070.14
VP3070.16
VP3070.18
VP3070.20
VP3070.22
4.5 mm Broad LC-DCP Plates
Holes
Length
6
106 mm
7
124
8
142
9
160
10
178
11
196
12
214
14
250
16
286
18
322
20
358
22
394
For use with 4.5 mm Cortex Screws.
Illustrations not actual size
www.synthesvet.com
4/12
Profile
Width: 17.5 mm
Thickness: 5.2 mm
Distance between center holes: 18.0 mm
2-24
Plates
Implants
LCP Plates
VP4011.04
VP4011.05
VP4011.06
VP4011.07
2.0 mm/1.5 mm LCP Plates
Holes
Length
4
27 mm
5
34
6
41
7
48
VP4012.06
VP4012.07
VP4012.08
VP4012.09
VP4012.10
VP4012.12
VP4012.14
Holes
6
7
8
9
10
12
14
Length
41 mm
48
55
62
69
83
97
Profile
Width: 5.5 mm
Thickness: 1.2 mm
Distance between center of holes: 7.0 mm
Distance between central holes: 4.6 mm
Profile
Width: 5.5 mm
Thickness: 1.5 mm
Distance between center of holes: 7.0 mm
Distance between central holes: 4.6 mm
For use with 2.0 mm Locking, 1.5 mm Cortex, and 2.0 mm Cortex Screws.
VP4021.04
VP4021.05
VP4021.06
VP4021.07
VP4021.08
2.4 mm LCP Plates
Holes
Length
4
32 mm
5
40
6
48
7
56
8
64
Profile
Width: 6.5 mm
Thickness: 1.7 mm
Distance between center of holes: 8.0 mm
Distance between central holes: 5.6 mm
VP4022.08
VP4022.09
VP4022.10
VP4022.12
VP4022.14
Holes
8
9
10
12
14
Profile
Width: 6.5 mm
Thickness: 2.0 mm
Distance between center of holes: 8.0 mm
Distance between central holes: 5.6 mm
Length
64 mm
72
80
96
112
For use with 2.4 mm Locking, 2.0 mm Cortex, and 2.4 mm Cortex Screws.
VP4031.04
VP4031.05
VP4031.06
VP4031.07
VP4031.08
VP4031.09
VP4031.10
VP4031.12
VP4031.14
VP4031.16
2.7 mm LCP Plates
Holes
Length
4
36 mm
5
45
6
54
7
63
8
72
9
81
10
90
12
108
14
126
16
144
Profile
Width: 7.5 mm
Thickness: 2.6 mm
Distance between center of holes: 9.0 mm
Distance between central holes: 6.0 mm
For use with 2.7 mm Locking and 2.7 mm Cortex Screws.
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-25
Plates
LCP Plates— continued
Implants
VP4041.02
VP4041.03
VP4041.04
VP4041.05
VP4041.06
VP4041.07
VP4041.08
VP4041.09
VP4041.10
VP4041.11
VP4041.12
VP4041.13
VP4041.14
VP4041.15
VP4041.16
VP4041.18
VP4041.20
VP4041.22
3.5 mm LCP Plates
Holes
Length
2
27 mm
3
40
4
53
5
66
6
79
7
92
8
105
9
118
10
131
11
144
12
157
13
170
14
183
15
196
16
209
18
235
20
261
22
287
Profile
Width: 11.0 mm
Thickness: 3.3 mm
Distance between center of holes: 13.0 mm
Distance between central holes: 9.4 mm
For use with 3.5 mm Locking, 3.5 mm Cortex, and 4.0 mm Cancellous Bone Screws.
VP4045.07
VP4045.08
VP4045.09
VP4045.10
VP4045.11
VP4045.12
VP4045.13
VP4045.14
VP4045.15
VP4045.16
VP4045.17
VP4045.18
VP4045.20
VP4045.22
3.5 mm Broad LCP Plates
Holes
Length
7
94 mm
8
107
9
120
10
133
11
146
12
159
13
172
14
185
15
198
16
211
17
224
18
237
20
263
22
289
Profile
Width: 13.5 mm
Thickness: 4.2 mm
Distance between center of holes: 13.0 mm
Distance between central holes: 9.4 mm
For use with 3.5 mm Locking, 3.5 mm Cortex, and 4.0 mm Cancellous Bone Screws.
Illustrations not actual size
www.synthesvet.com
4/12
2-26
Plates
Implants
LCP Plates— continued
VP4051.03
VP4051.04
VP4051.05
VP4051.06
VP4051.07
VP4051.08
VP4051.09
VP4051.10
VP4051.11
VP4051.12
VP4051.14
VP4051.16
4.5 mm Narrow LCP Plates
Holes
Length
3
66 mm (for Equine PIP Arthrodesis)
4
71
5
89
6
107
7
125
8
143
9
161
10
179
11
197
12
215
14
251
16
287
Profile
Width: 13.5 mm
Thickness: 4.2 mm
Distance between center of holes: 18.0 mm
Distance between central holes: 12.8 mm
For use with 4.0 mm and 5.0 mm Locking,
4.5 mm Cortex and 6.5 mm Cancellous Bone Screws.
VP4061.06
VP4061.07
VP4061.08
VP4061.09
VP4061.10
VP4061.11
VP4061.12
VP4061.13
VP4061.14
VP4061.15
VP4061.16
VP4061.18
4.5 mm Broad LCP Plates
Holes
Length
6
107 mm
7
125
8
143
9
161
10
179
11
197
12
215
13
233
14
251
15
269
16
287
18
323
Profile
Width: 17.5 mm
Thickness: 5.2 mm
Distance between center of holes: 18.0 mm
Distance between central holes: 12.8 mm
For use with 4.0 mm and 5.0 mm Locking,
4.5 mm Cortex and 6.5 mm Cancellous Bone Screws.
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-27
Plates
LCP Plates— continued
Profile
Width: 17.5 mm
Thickness: 6.0 mm
Distance between center of holes: 18.0 mm
Distance between central holes: 12.8 mm
For use with 4.0 mm and 5.0 mm Locking, 4.5 mm and
5.5 mm Cortex and 6.5 mm Cancellous Bone Screws.
VP4230.04
VP4230.05
VP4230.06
VP4230.07
VP4230.08
VP4230.09
VP4230.10
VP4230.11
VP4230.12
3.5 mm LCP Reconstruction Plates
Holes
Length
4
56 mm
5
70
6
84
7
98
8
112
9
126
10
140
11
154
12
168
Profile
Width: 10.1 mm
Thickness: 3.5 mm
Distance between center of holes: 14.0 mm
Distance between central holes: 10.0 mm
For use with 3.5 mm Locking, 3.5 mm Cortex and
4.0 mm Cancellous Bone Screws.
VP4312.07
2.0 mm LCP Notched Head T-Plate, 2 holes in head, 7 holes in shaft, 54 mm
For use with 2.0 mm Locking and 2.0 mm Cortex Screws
Profile
Width of head: 10.0 mm
Width of shaft: 5.0 mm
Thickness: 1.3 mm
VP4322.07
2.4 mm LCP Notched Head T-Plate, 2 holes in head, 7 holes in shaft, 59 mm
For use with 2.4 mm Locking and 2.4 mm Cortex Screws
Profile
Width of head: 12.0 mm
Width of shaft: 6.4 mm
Thickness: 1.3 mm
VP4332.07
2.7 mm LCP Notched Head T-Plate, 2 holes in head, 7 holes in shaft, 66 mm
For use with 2.7 mm Locking and 2.7 mm Cortex Screws
Profile
Width of head: 14.2 mm
Width of shaft: 7.0 mm
Thickness: 1.5 mm
Illustrations not actual size
www.synthesvet.com
4/12
Implants
VP4071.10
VP4071.11
VP4071.12
VP4071.13
VP4071.14
VP4071.15
VP4071.16
VP4071.17
VP4071.18
5.5 mm Broad LCP Plates
Holes
Length
10
180 mm
11
198
12
216
13
234
14
252
15
270
16
288
17
306
18
324
2-28
Plates
Implants
LCP Plates— continued
VP4343.03
VP4343.04
VP4343.05
VP4343.06
VP4343.07
VP4343.08
3.5 mm LCP T-Plates
3 head, right angle
Shaft
Length
3
50 mm
4
57
5
67
6
77
7
87
8
97
Profile
Width of shaft: 10 mm
Width of head: 24 mm
Thickness: 1.5 mm
Distance between holes: 10 mm
Head holes accept 3.5 mm Locking, 2.7 mm and 3.5 mm Cortex Screws.
Shaft holes accept 3.5 mm Locking, 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws.
TPLO Plates
VP4405.L3
VP4405.R3
2.0 mm Tibial Plateau Leveling Osteotomy Plates
Holes
3
left
3
right
Profile
Shaft width: 5.5 mm
Thickness: 2.3 mm
Head holes accept 2.0 mm Locking and 2.0 mm Cortex Screws.
Shaft holes accept 2.0 mm Cortex Screws.
Shaft Combi hole accepts 2.0 mm Locking or 2.0 mm Cortex Screws.
VP4404.L3
VP4404.R3
2.4 mm Tibial Plateau Leveling Osteotomy Plates
Holes
3
left
3
right
Profile
Shaft width: 6.5 mm
Thickness: 2.3 mm
Head holes accept 2.4 mm Locking and 2.4 mm Cortex Screws.
Shaft holes accept 2.4 mm Cortex Screws.
Shaft Combi hole accepts 2.4 mm Locking or 2.4 mm Cortex Screws.
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-29
Plates
TPLO Plates— continued
VP4400.L3
VP4400.R3
2.7 mm Tibial Plateau Leveling Osteotomy Plates
Holes
3
left
3
right
Head holes accept 2.7 mm Locking and 2.7 mm Cortex Screws.
Shaft holes accept 2.7 mm Cortex Screws.
Combi hole accepts 2.7 mm Locking or 2.7 mm Cortex Screw.
VP4403.L3
VP4403.R3
3.5 mm Small Tibial Plateau Leveling Osteotomy Plates
Holes
3
left
3
right
Profile
Shaft width: 11.0 mm
Thickness: 3.7 mm
Head holes accept 3.5 mm Locking, 3.5 mm Cortex, and 4.0 mm Cancellous Bone Screws.
Shaft holes accept 3.5 mm Cortex Screws.
Combi shaft hole accepts 3.5 mm Cortex or 3.5 mm Locking Screw.
VP4401.L3
VP4401.R3
3.5 mm Tibial Plateau Leveling Osteotomy Plates
Holes
3
left
3
right
Profile
Shaft Width: 11.0 mm
Thickness: 3.7 mm
Head holes accept 3.5 mm Locking, 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws.
Shaft holes accept 3.5 mm Cortex Screws.
Combi hole accepts 3.5 mm Cortex or 3.5 mm Locking Screw.
VP4402.L4
VP4402.R4
3.5 mm Broad Tibial Plateau Leveling Osteotomy Plates
Holes
4
left
Profile
4
right
Shaft Width: 13.5 mm
Thickness: 3.7 mm
Head holes accept 3.5 mm Locking, 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws.
Shaft holes accept 3.5 mm Cortex Screws.
Combi holes accept 3.5 mm Cortex or 3.5 mm Locking Screw.
Illustrations not actual size
www.synthesvet.com
4/12
Implants
Profile
Shaft Width: 8.0 mm
Thickness: 2.5 mm
2-30
Plates
Titanium Plates
Implants
2.0 mm Titanium Locking Plates
Mini
VPT4010.20
Holes
20, adaption
VPT4010.04
VPT4010.06
4, narrow
6, narrow
Length
119 mm
28
40
Profile
Thickness: 1.0 mm
Width: 4.9 mm
Hole Spacing: 6.0 mm
Distance between central holes: 11.0 mm
Intermediate
VPT4011.12
VPT4011.06
Holes
12
6
Length
77 mm
Profile
Thickness: 1.3 mm
Width: 5.1 mm
Hole Spacing: 6.5 mm
43
Distance between central holes: 12.0 mm
Large
VPT4014.06
VPT4014.12
VPT4014.20
Holes
6
12
20
VPT4013.06
3x3
Length
47 mm
95
159
Profile
Thickness: 1.5 mm
Width: 6.6 mm
Hole Spacing: 8.0 mm
53
Distance between central holes: 14.0 mm
Extra-Large
VPT4015.12
VPT4015.20
Holes
12
20
Length
95 mm
159
Profile
Thickness: 1.9 mm
Width: 6.6 mm
Hole Spacing: 8.0 mm
For use with 2.0 mm Titanium Locking and 2.0 mm Titanium Cortex Screws (VST211, VST212 and VST311 series)
2.4 mm Titanium Locking Reconstruction Plates
VPT4120.14
VPT4120.24
Holes
14
24
Length
104 mm
184
Profile
Thickness: 2.5 mm
Width: 8.0 mm
Hole Spacing: 8.0 mm
For use with 2.4 mm and 3.0 mm Titanium Locking and 2.4 mm Titanium Cortex Screws (VST201 and VST202 series)
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-31
General Implants
Clamps and Rods (for CRIF System)
Clamps
Mini Clamp, for use with 2.0 mm screws, 2.0 mm rods
Small Clamp, for use with 2.7 mm screws, 3.0 mm rods
Medium Clamp, for use with 3.5 mm screw, 5.0 mm rods
VC2000.02
VC3000.02
VC5000.02
End Clamps
Mini End Clamp, for use with 2.0 mm screws, 2.0 mm rods
Small End Clamp, for use with 2.7 mm screws, 3.0 mm rods
Medium End Clamp, for use with 3.5 mm screws, 5.0 mm rods
VR201.030
VR201.045
VR201.090
Rods
Diameter
2.0 mm
2.0
2.0
Length
30 mm
45
90
VR301.045
VR301.090
VR301.120
3.0
3.0
3.0
45
90
120
VR501.060
VR501.075
VR501.090
VR501.105
VR501.120
VR501.150
VR501.180
VR501.210
VR501.240
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
60
75
90
105
120
150
180
210
240
Implants
VC2000.01
VC3000.01
VC5000.01
Illustrations not actual size
www.synthesvet.com
4/12
2-32
General Implants
Implants
Washers and Wires
VP1300.01
VP1300.02
VP1300.03
VP1300.04
VP1300.05
Washers
Outer Diameter
4.5 mm, for mini screws up to and including 2.0 mm screws
6.5 mm, for 3.0 mm cannulated screws and 2.4 mm screws
7.0 mm, for 2.7 mm and 3.5 mm screws
10.0 mm, for 4.0 mm and 4.5 mm screws
13.0 mm, for large screws up to 6.5 mm
Spiked Washers
For use with stainless steel screws
Made from PEEK (polyetheretherketone) +6% BaSO4 (for radiopacity)
Primary indication: Fixation of torn or avulsed ligaments
VP1301.01
VP1301.02
VP1301.03
VP1302.01
VW0603.70
VW0803.70
VW0803.15
VW1003.15
VW1003.28
VW1203.15
VW1203.28
VW1403.15
VW1403.28
VW1603.15
VW1603.28
VW1803.15
VW1803.28
VW2003.15
VW2003.28
VW2503.15
VW2503.28
VW3001.15
VW3003.28
Outer/Inner Diameters
8.0 mm/3.2 mm, for 2.7 mm screws
13.5 mm/4.0 mm, for 3.5 mm and 4.0 mm screws
13.5 mm/6.5 mm, for 4.5 mm screws, and
for 6.5 mm cannulated and cancellous bone screws (by threading)
Nut
for 4.5 mm Cortex Screws
11.0 mm diameter, 8.0 mm width across flats
Kirschner Wires, trocar point (10/pkg.)
Diameter
Length
0.6 mm
70 mm
0.8
70
0.8
150
1.0
150
1.0
280
1.25
150
1.25
280
1.4
150
1.4
280
1.6
150
1.6
280
1.8
150
1.8
280
2.0
150
2.0
280
2.5
150
2.5
280
3.0
150
3.0
280
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-33
General Implants
Kirschner Wires
292.73
292.75
292.76
292.79
Kirschner Wires, with 15 mm threaded trocar point (10/pkg.)
Diameter
Length
1.6 mm
150 mm
2.5
150
2.5
200
2.0
150
VW1005.15
VW1205.15
VW1605.15
VW1805.15
VW2005.15
VW2505.15
VW3005.15
Kirschner Wires, with 5 mm threaded trocar point (10/pkg.)
Diameter
Length
1.0 mm
150 mm
1.25
150
1.6
150
1.8
150
2.0
150
2.5
150
3.0
150
VW0801.28
VW1001.28
VW1201.28
VW1501.28
Cerclage Wires, with eye, 280 mm (10/pkg.)
Diameter
0.8 mm
1.0
1.25
1.5
Illustrations not actual size
www.synthesvet.com
4/12
Implants
VW0604.07
VW0804.07
VW1004.15
VW1204.15
VW1404.15
VW1604.15
VW1804.15
VW2004.15
VW2504.15
VW3004.15
Kirschner Wires, trocar point on both ends (10/pkg.)
Diameter
Length
0.6 mm
70 mm
0.8
70
1.0
150
1.25
150
1.4
150
1.6
150
1.8
150
2.0
150
2.5
150
3.0
150
2-34
General Implants
Implants
Wires and Cables
VW0402.10
VW0602.10
VW0802.10
VW1002.10
VW1202.10
VW1502.10
Cerclage Wire Coils
Diameter
Length
0.4 mm
8m
0.6
8
0.8
10
1.0
10
1.25
10
1.5
10
VW1006.7S
VW1706.7S
Cable with Crimp, 750 mm, sterile
1.0 mm diameter
1.7 mm diameter
VW0411.15
VW0611.17
VW0811.20
VW1011.25
VW1211.30
Precut Cerclage Wire, soft (10/pkg)
Diameter
Length
0.4 mm
150 mm
0.6
175
0.8
200
1.0
250
1.25
300
VW3507.15
VW4007.20
VW4507.25
VW5007.25
Steinmann Pins
Diameter
3.5 mm
4.0
4.5
5.0
02.111.500.10
02.111.501.10
1.25 mm Plate Reduction Wires, threaded tip
with small stop (10/pkg)
with large stop (10/pkg)
03.211.410
03.211.415
03.211.420
03.211.425
03.211.430
03.211.435
03.211.440
1.6 mm Compression Wires, 150 mm
Thread Length
10 mm
15
20
25
30
35
40
Length
150 mm
200
250
250
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
2-35
General Implants
Buttons, Wire Mounts, Guide Wires, Plug
Cerclage Button, 3.5 mm, sterile
for use in 3.5 mm screw heads
VW4505.1S
Cerclage Button, 4.5 mm, sterile
for use in 4.5 mm screw heads
298.838S
3.5 mm Threaded Cerclage Positioning Pin
298.803S
4.5 mm Threaded Cerclage Positioning Pin
298.837S
3.5 mm Cerclage Positioning Pin
298.839S
4.5 mm Cerclage Positioning Pin
281.001S
Wire Mount
for 4.5 mm DCP and LC-DCP, sterile
900.722
1.25 mm Threaded Guide Wire, 150 mm
292.652
2.0 mm Threaded Guide Wire
292.656
2.0 mm Non-Threaded Guide Wire, 230 mm, spade point
02.200.003
3.5 mm Threaded Plug, with StarDrive recess
for use with 3.5 mm LCP Plates
Illustrations not actual size
www.synthesvet.com
4/12
Implants
VW3505.1S
3-1
Instruments
For Removal of Broken Implants
Hollow Reamers, complete
for 1.5 mm screws
for 2.0 mm screws
for 2.7 mm screws
for 3.5 mm and 4.0 mm screws
for 4.5 mm screws
for 6.5 mm and 7.0 mm screws
309.070
309.170
309.270
309.370
309.470
309.670
Spare Centering Pins
For Hollow Reamer (309.150)
For Hollow Reamer (309.200)
For Hollow Reamer (309.250)
For Hollow Reamer (309.035)
For Hollow Reamer (309.450)
For Hollow Reamer (309.065)
309.038
309.068
309.080
309.180
309.280
309.480
Spare Reamer Tubes
For Hollow Reamer (309.035)
For Hollow Reamer (309.065)
For Hollow Reamer (309.150)
For Hollow Reamer (309.200)
For Hollow Reamer (309.250)
For Hollow Reamer (309.450)
309.090
309.190
309.039
309.290
309.490
309.069
Extraction Bolts
For 1.5 mm screws
For 2.0 mm screws
For 3.5 mm and 4.0 mm screws
For 2.7 mm screws
For 4.5 mm and 5.0 mm screws
For 6.0 mm, 6.5 mm and 7.0 mm screws
309.510
309.520
309.530
Conical Extraction Screws
For 1.5 mm and 2.0 mm Cortex Screws
For 2.7 mm and 3.5 mm Cortex Screws
For large screws and 4.9 mm bolts
309.501
Conical Extraction Device
for Threaded Washers
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
309.150
309.200
309.250
309.035
309.450
309.065
3-2
Instruments
Instruments
Drill Bits
310.10
310.14
310.20
310.24
310.27
310.30
310.32
310.36
310.38
310.45
310.49
Drill Bits, for Jacobs chuck
Diameter
Total Length
1.1 mm
45 mm
1.5
70
2.0
85
2.5, gold
95
2.7
85
3.2
180
3.2
130
3.5
95
3.5
180
4.5
130
4.5
180
310.11
310.15
310.16
310.509
310.510
310.19
310.21
310.530
310.23
310.25
310.26
310.28
310.288
310.29
310.31
310.35
310.37
310.40
310.401
310.431
310.44
310.48
310.55
Drill Bits, quick coupling
Diameter
Total Length
1.1 mm
60 mm
1.5
85
1.5
110
1.8
110
1.8
100
2.0
100
2.0
125
2.4
100
2.5, gold
180
2.5, gold
110
2.7
100
2.7
125
2.8
165
3.2
195
3.2
145
3.5
110
3.5
195
4.0
197
4.0
160
4.3
180
4.5
145
4.5
195
5.5
197
Jacobs chuck
Coupling
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-3
Instruments
Drill Bits— continued
310.161
1.5 mm Drill Bit with Depth Mark,
Stryker J-latch, 110 mm
323.062
2.0 mm Drill Bit with Depth Mark
quick coupling, 140 mm
323.062
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
315.21
315.25
315.28
315.31
315.37
315.48
Three-Fluted Drill Bits, quick coupling
Diameter
Total Length
2.0 mm
125 mm
2.5
110
2.7
125
3.2
145
3.5
195
4.5
195
3-4
Instruments
Instruments
Countersinks
310.88
Countersinks
for 1.5 mm and 2.0 mm cortex screws
310.972
for 2.4 mm cortex screws
310.87
for 2.7 mm cortex screws
310.89
for 3.5 mm cortex and 4.0 mm cancellous bone screws
310.99
for 4.5 mm cortex screws
(may also be used with 5.5 mm cortex screws)
310.86
Cannulated Countersink
for 3.5 mm and 4.0 mm cannulated screws
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-5
Instruments
Taps
Taps
for 1.5 mm cortex screws, 50 mm
311.19
for 2.0 mm cortex screws, 54 mm
311.21
for 2.0 mm cortex screws 100 mm
311.23
for 2.4 mm cortex screws 100 mm
311.26
for 2.7 mm cortex screws 100 mm
311.28
for 2.7 mm cortex screws, 125 mm
311.32
for 3.5 mm cortex screws, gold, 110 mm
311.33
for 3.5 mm cortex screws, gold, 180 mm
311.34
for 4.0 mm cancellous bone screws, 110 mm
311.46
for 4.5 mm cortex screws
130 mm, 57 mm tap depth
311.47
for 4.5 mm cortex screws
175 mm, 140 mm calibration
311.48
for 4.5 mm cortex screws
180 mm, 110 mm tap depth
311.55
for 5.5 mm cortex screws
197 mm, 100 mm tap depth, quick coupling
311.66
for 6.5 mm cancellous bone screws
197 mm, 150 mm calibration
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
311.15
3-6
Instruments
Handles
Handles
with mini quick coupling, stainless steel
311.01
with mini quick coupling
311.43
with quick coupling, small
311.005
Screwdriver Handle
with hex coupling (for use with 313.252)
311.44
T-Handle
with quick coupling
Instruments
310.95
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-7
Instruments
Drill Guides
312.20
2.0 mm Parallel Drill Guide and Drill Sleeve
312.47
4.5 mm Pointed Drill Guide
Instruments
Drill Sleeves
312.30
3.5 mm/2.5 mm Insert Drill Sleeve
312.48
4.5 mm/3.2 mm Insert Drill Sleeve
312.57
5.5 mm/4.0 mm Insert Drill Sleeve
312.14
1.5 mm, 1.1 mm Double Drill Sleeve
312.181
2.4 mm/1.8 mm Drill Guide
312.35
2.7 mm/1.25 mm Double Drill Sleeve
312.22
2.0 mm/1.5 mm Double Drill Sleeve
Illustrations not actual size
www.synthesvet.com
4/12
3-8
Instruments
Instruments
Drill Sleeves— continued
312.24
2.7 mm/2.0 mm Double Drill Sleeve
312.28
3.5 mm/2.5 mm Double Drill Sleeve
312.46
4.5 mm/3.2 mm Double Drill Sleeve
312.560
5.5 mm/4.0 mm Double Drill Sleeve
312.67
6.5 mm/3.2 mm Double Drill Sleeve
312.55
5.5 mm Tap Sleeve
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-9
Instruments
Screwdrivers
Ratcheting Screwdriver Handle
313.251
1.5 mm/2.0 mm PlusDrive Screwdriver, self-retaining
313.252
1.5 mm/2.0 mm Screwdriver Blade, self-retaining, PlusDrive, hex coupling
use with 311.005
313.94.96
2.4 mm Cruciform Screwdriver
consists of Screwdriver (313.96) and Holding Sleeve (313.97)
313.96.96
2.4 mm Cruciform Screwdriver
For use with Holding Sleeve (313.97)
313.99
Cruciform Screwdriver with Holding Sleeve
for 1.5 mm and 2.0 mm Cortex Screws self-retaining
Instruments
311.023.97
Illustrations not actual size
www.synthesvet.com
4/12
3-10
Instruments
Instruments
Screwdrivers— continued
313.993
1.5 mm, 2.0 mm Cruciform Screwdriver Shaft
self-retaining
314.00
Cruciform Screwdriver Shaft with Holding Sleeve
for 1.5 mm and 2.0 mm Cortex Screws
314.67.97
Cruciform Screwdriver Shaft with Holding Sleeve
for 1.5 mm and 2.0 mm Cortex Screws
314.02
Small Hexagonal Screwdriver
with Holding Sleeve
for 2.7 mm and 3.5 mm Cortex, and 4.0 mm Cancellous Screws
314.03
Small Hexagonal Screwdriver Shaft
for 2.7 mm and 3.5 mm Cortex, and 4.0 mm Cancellous Screws
314.115
StarDrive Screwdriver, T15
for 3.5 mm Locking Screws
314.116
StarDrive Screwdriver Shaft, T15
quick coupling
for 3.5 mm Locking Screws
314.118
StarDrive Screwdriver, T25
self-retaining, 245 mm
for 4.0 mm and 5.0 mm Locking Screws
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-11
Instruments
Screwdrivers— continued
StarDrive Screwdriver Shaft, T25
self-retaining, 165 mm
for 4.0 mm and 5.0 mm Locking Screws
314.467
StarDrive Screwdriver Shaft, T8, 105 mm
for 2.4 mm and 2.7 mm Locking Screws
313.843
StarDrive Screwdriver Shaft, T6
for 2.0 mm Locking Screws
314.15
Large Hexagonal Screwdriver Shaft
for 4.5 mm and 5.5 mm Cortex, and 6.5 mm Cancellous Screws
314.13
Large Hexagonal Screwdriver with T-Handle
314.17
Large Hexagonal Screwdriver with Universal Joint
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
314.119
3-12
Instruments
Screwdrivers and Holding Sleeves
Cannulated Hexagonal Screwdriver
314.27
Large Hexagonal Screwdriver
for 4.5 mm and 5.5 mm Cortex and 6.5 mm Cancellous Screws
313.97.96
Holding Sleeve, for 2.4 mm screws
for use with screwdriver 313.94.96 and 313.96.96
314.06
Holding Sleeve, for 2.7 mm and 3.5 mm screws
for use with screwdriver 314.02
314.08
Holding Sleeve, for 2.7 mm and 3.5 mm screws
for use with small hexagonal screwdrivers and shafts
314.11
Holding Sleeve, for 4.5 mm and larger screws
for use with screwdriver 314.27
314.468
Holding Sleeve
for StarDrive Screwdriver Shaft, T8 (314.467)
Instruments
314.29
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-13
Instruments
Depth Gauges
319.02
Gauge
for drill bits and screws
Depth Gauges
for 2.0 mm and 2.4 mm screws
319.01
for 2.7 mm and 3.5 mm Cortex, and 4.0 mm Cancellous Bone Screws
319.04
for 2.7 mm and 3.5 mm Cortex, and 4.0 mm Cancellous Bone Screws
319.06
for mini screws, extra-long (1.5 mm, 2.0 mm, 2.4 mm)
319.09
for 2.7 mm and 3.5 mm Cortex, and 4.0 mm Cancellous Bone Screws
319.091
for 3.5 mm cortex screws
319.10
for 4.5 mm and larger screws
319.11
for mini screws (1.5 mm, 2.0 mm, 2.4 mm)
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
319.006
3-14
Instruments
Instruments
Drill Guides
319.39
Sharp Hook
319.44
Holding Clip for plates and washers
319.97
Screw Forceps
322.15
DCP Drill Guides, neutral and load
2.0 mm
322.21
2.7 mm
322.32
3.5 mm
322.44
4.5 mm
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-15
Instruments
Drill Guides— continued
5.5 mm Universal Drill Guide
323.201
2.0 mm Universal Drill Guide
323.202
2.4 mm Universal Drill Guide
323.26
2.7 mm Universal Drill Guide
323.36
3.5 mm Universal Drill Guide
323.46
4.5 mm Universal Drill Guide
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
322.535
3-16
Instruments
Drill Guides— continued
3.5 mm LC-DCP Drill Guide, neutral and load
323.45
4.5 mm LC-DCP Drill Guide, neutral and load
Instruments
323.35
LCP Instruments
323.021
Direct Measuring Device
for 5.0 mm Locking Screws
For use with 2.0 mm Guide Wires
323.023
1.6 mm Wire Sleeve
323.025
Direct Measuring Device
For use with 1.6 mm K-Wire
323.046
2.0 mm Wire Sleeve
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-17
Instruments
LCP Instruments— continued
3.5 mm Locking Screw Sleeve
323.054
2.8 mm Drill Sleeve
323.055
1.6 mm Wire Sleeve
324.031
Threaded Plate Holder, long
for 3.5 mm locking hole
324.075
Threaded Plate Holder
for 5.0 mm locking hole
324.023
Threaded Plate Holder
324.024
Push-Pull Reduction Device
for 3.5 mm LCP plates
311.449
Push-Pull Reduction Device
for 4.5 mm LCP Plates
323.061
323.034
323.029
2.0 mm Threaded Drill Guide with Depth Gauge
1.5 mm Threaded LCP Drill Guide, for 2.0 mm Locking Screws
1.8 mm Threaded LCP Drill Guide, for 2.4 mm Locking Screws
03.111.010
03.111.011
313.353
312.648
312.445
312.449
397.441
397.442
1.5 mm LCP Solid Threaded Drill Guide, for 2.0 mm LCP Plates
1.8 mm LCP Solid Threaded Drill Guide, for 2.4 mm LCP Plates
2.0 mm Threaded Drill Guide, for 2.7 mm Locking Screws
2.8 mm Threaded Drill Guide (LCP), for 3.5 mm Locking Screws
3.2 mm Threaded Drill Guide (LCP), for 4.0 mm Locking Screws
4.3 mm Threaded Drill Guide (LCP), for 5.0 mm Locking Screws
1.8 mm Threaded Drill Guide, for 2.4 mm Titanium Reconstruction Plates (2.4 mm Locking Screws)
2.4 mm Threaded Drill Guide, for 2.4 mm Titanium Reconstruction Plates (3.0 mm Locking Screws)
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
323.053
3-18
Instruments
Bending Instruments
Bending Irons
for 1.5 mm and 2.0 mm plates
329.02
for 4.5 mm plates
329.04
for 2.7 mm and 3.5 mm plates
used with 329.05
329.05
for 2.7 mm and 3.5 mm plates
used with 329.04
329.07
for 2.7 mm and 3.5 mm Reconstruction Plates
329.08
for 3.5 mm and 4.5 mm Reconstruction Plates
312.561
Rod Bender, for 3.0 mm and 5.0 mm rods
for use with CRIF System
Bending Iron, left, for 5.0 mm rods
Bending Iron, right, for 5.0 mm rods
Instruments
329.01
388.911
388.922
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-19
Instruments
Bending Instruments— continued
329.12
Bending Pliers
smooth jaws, for mini plates
for 2.7 mm and 3.5 mm plates
(and TPLO jig pin)
329.24
for plates, complete with two anvils
Instruments
329.15
Replacement Anvils, for 329.24
329.25
Anvil for Narrow Plates
329.26
Anvil for Broad Plates
329.241
Anvil for 5.0 mm–3.0 mm Rods, for use with 329.24
329.921
329.922
Threaded Bending Pin, for 2.0 mm LCP Plates
Bending Pin for 2.4 mm Locking Plates
Illustrations not actual size
www.synthesvet.com
4/12
3-20
Instruments
Instruments
Bending Instruments— continued
329.27
Special Bending Pliers
for 2.7 mm Reconstruction Plates
329.29
Bending Pliers
for 2.7 mm and 3.5 mm Reconstruction Plates
329.30
Plate-Bending Press
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-21
Instruments
Bending Instruments— continued
Bending Pliers, for 2.0 mm and 2.4 mm plates
329.18
Bending Pliers, for 2.0 mm and 2.4 mm plates
329.142
Combination Bending Pliers for 2.0 mm–2.4 mm plates
Instruments
329.17
Illustrations not actual size
www.synthesvet.com
4/12
3-22
Instruments
Bending Instruments— continued
Combination Bending/Cutting Pliers for 1.0 mm–2.0 mm Plates
Used with 347.965
347.965
Combination Bending Pliers for 1.0 mm–2.0 mm Plates
Used with 391.965
329.143
2.0 mm Locking Plate Bender/Cutter
Instruments
391.965
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
Instruments
3-23
Instruments for TPLO
Standard TPLO Jig
VQ0001.01
Short Replacement Jig Pin Screw
VQ0001.04
Long Replacement Jig Pin Screw
VQ0001.02
Replacement Hinge Screw
VQ0001.03
Replacement Saw Guide Screw
VQ0001.24
VQ0001.27
VQ0001.30
Saw Guides, for use with Standard TPLO Jig
24 mm
27 mm
30 mm
VQ0002.00
Mini TPLO Jig
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
VQ0001.00
3-24
Instruments
Instruments for TPLO— continued
Replacement Hinge Screw for Mini Jig
VQ0002.04
Replacement Jig Pin Screw for Mini Jig
Instruments
VQ0002.02
Aiming Instruments
333.31
333.32
333.33
333.34
Drill Sleeves
3.5 mm/110 mm
2.0 mm
3.2 mm
4.5 mm
333.35
Small Pointed Hook
333.36
Locking Sleeve
333.37
Measuring Bar
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-25
Instruments
Aiming Instruments— continued
Offset Pointed Hook
333.39
Forked Impactor
333.40
Hook for External Fixator
333.41
Large Hook for knee
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
333.38
3-26
Instruments
Instruments
Aiming Instruments— continued
333.42
2.0 mm Drill Sleeve
with two parallel holes
333.53
Check Tube
380.03
3.2 mm Drill Bit
with 44 mm stop, quick coupling
Wire and Cable Instruments
391.09
Wire Passer
Hole Diameter: 2.1 mm
Radius of Working End: 12 mm
391.10
45 mm Wire Passer
standard, 220 mm
Hole Diameter: 3.3 mm
Radius of Working End: 20 mm
391.104
Large Cable Passer
curved
Hole Diameter: 3.18 mm
Radius of Working End: 29 mm
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-27
Instruments
Wire and Cable Instruments— continued
Medium Cable Passer
Hole Diameter: 3.18 mm
Radius of Working End: 20 mm
391.107
Large Cable Passer
Hole Diameter: 3.18 mm
Radius of Working End: 29 mm
391.13
70 mm Wire Passer, 235 mm
Hole Diameter: 3.0 mm
Radius of Working End: 35 mm
391.201
Cable Tensioner
391.883
Attachment Bit
391.884
Provisional Tensioning Device
Instruments
391.105
Illustrations not actual size
www.synthesvet.com
4/12
3-28
Instruments
Wire Instruments
Wire Tightener
with Handle and two Pegs, 240 mm
391.23
Fastight Wire Tightener
391.80
Holding Forceps, 170 mm
391.82
Wire-Bending Pliers, 160 mm
391.85
Flat-Nosed Parallel Pliers, 160 mm
Instruments
391.21
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-29
Instruments
Pliers, Cutters and Cable Crimper
Locking Pliers, 180 mm
391.882
Cable Crimper
391.90
Small Wire Cutter, 160 mm
Cuts up to 1.25 mm diameter wires
391.905
Cable Cutter, standard
391.906
Cable Cutter, large
Instruments
391.88
Illustrations not actual size
www.synthesvet.com
4/12
3-30
Instruments
Pliers and Cutters— continued
Wire Cutter, 220 mm
Cuts up to 2.5 mm diameter wires
391.94
Small Wire Cutter, 230 mm
391.990
Plate and Rod Cutter
388.72
Rod Cutter
391.944
Wire Cutters
cuts up to and including 2.5 mm diameter wires
Instruments
391.93
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-31
Instruments
Pliers, Cutters and Wire Instruments— continued
Plate-Cutting Forceps
for 1.5 mm-2.7 mm plates
391.962
Bending/Cutting Pliers
391.963
Universal Bending Pliers
391.967
Shortcut Plate Cutters
for 2.4 mm plates (2 required)
391.97
Wire Cutter, 145 mm
392.00
Bending Irons
for 1.25 mm, 1.6 mm and 2.0 mm Kirschner Wires
(and 2.0 mm CRIF rod)
392.02
for 0.8 mm to 1.25 mm Kirschner Wires
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
391.95
3-32
Instruments
Instruments
Pliers, Cutters and Wire Instruments— continued
392.040
Hand Chuck for Kirschner Wires
392.177
392.178
392.179
392.18
392.24
Protective Caps for Kirschner Wires
for 1.0 mm and 1.25 mm
for 1.6 mm
for 2.0 mm
for 1.8 mm and 2.0 mm
for 2.5 mm
Handles and Chuck
393.105
Small Universal Chuck with T-Handle
397.70
Handle
for Gouges and Chisels quick coupling
397.705
Handle
quick coupling, for Compact Air Drive
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-33
Instruments
Forceps, Clamp Spreaders and Hooks
Clamp Spreader, for Mini Clamps (for CRIF System)
Clamp Spreader, for Small and Medium Clamps (for CRIF System)
398.51
398.52
398.53
Bone Hooks
Small, 230 mm
Medium, 230 mm
Large, 200 mm
398.65
392.970
392.971
392.972
03.211.400
Forceps
for Broken Screw Removal
Rod Holding Forceps, for CRIF System
for 2.0 mm rod, mini
for 3.0 mm rod, small
for 5.0 mm rod, medium
Compression Forceps
for use with 1.6 mm compression wire (see pg. 2–34)
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
392.973
392.974
3-34
Instruments
Instruments
Forceps— continued
398.99
Small Plate Holding Forceps, 135 mm length
398.79
Self-Centering Bone Forceps with speed lock
Serrated jaw, 9 mm
398.80
398.81
398.82
398.83
Serrated jaw, 10 mm
Serrated jaw, 14 mm
Serrated jaw, 18 mm
Serrated jaw, 23 mm
398.811
398.812
398.813
398.814
398.819
Plate Holding Forceps with swivel foot, 190 mm length
Size 0, for 2.7 mm and 3.5 mm plates
Size 1, for 3.5 mm plates
Size 2, for 4.5 mm plates (narrow and broad)
Size 3, for DHS, DCS and angled blade plates
150 mm length, for use with 1.5 mm-2.4 mm plates
398.95
Termite Forceps, 90 mm
399.77
399.78
399.79
Reduction Forceps with points, speed lock
130 mm
205 mm
132 mm, serrated jaw
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-35
Instruments
Forceps— continued
Reduction forceps with points, ratchet
174 mm
130 mm
205 mm
144 mm, serrated jaw
399.051
399.06
Reduction Forceps
with serrated jaw, 240 mm, speed lock
180 mm, speed lock
399.092
Reduction Forceps with points, soft ratchet
medium handle
398.40
Reduction Forceps with points
Narrow, ratchet, 132 mm
398.41
Reduction Forceps with points
Broad, ratchet, 132 mm
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
399.94
399.97
399.98
399.99
3-36
Instruments
Instruments
Forceps— continued
399.124
399.098
Reduction Forceps with serrated jaw, soft ratchet
Large handle
Medium handle
399.091
399.121
399.122
399.123
Bone Holding Forceps, soft ratchet
for plates to 9 mm wide
for plates to 14 mm wide
for plates to 19 mm wide
for plates to 22 mm wide
399.081
399.083
399.097
399.125
Bone Holding Forceps, soft ratchet
for plates to 7 mm wide
Bone Spreaders, soft ratchet
5.5 mm blade, small handle
8 mm blade, medium handle
12 mm blade, large handle
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-37
Instruments
Retractors
Hohmann Retractors
small, 6 mm, short narrow tip, 160 mm
small, 8 mm, short narrow tip, 160 mm
399.195
8 mm, round tip, 215 mm
399.197
8 mm, narrow tip, 215 mm
399.20
399.21
8 mm, short narrow tip, 220 mm
18 mm, short narrow tip, 235 mm
399.22
399.23
43 mm, narrow tip, 240 mm
70 mm, narrow tip, 240 mm
399.25
22 mm, wide tip, 250 mm
399.27
18 mm, long narrow tip
399.28
24 mm, long wide tip, 270 mm
399.49
15 mm, broad shank, 150 mm
for small fragments
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
399.18
399.19
3-38
Instruments
Instruments
Elevators and Bone Levers
399.31
399.34
Malleable Bone Levers
8 mm, 202 mm
10 mm, 202 mm
03.100.041
Periosteal Elevators, with 200 mm handle
6 mm width, curved blade
03.100.042
14 mm width, curved blade
03.100.043
14 mm width, straight blade
03.100.044
20 mm width, straight blade
399.32
Periosteal Elevators
13 mm, straight blade, straight edge
399.33
13 mm, curved blade, straight edge
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-39
Instruments
Elevators, Hammers and Osteotomes
Periosteal Elevators
14 mm, curved blade, round edge
399.36
6 mm, curved blade, round edge
399.37
14 mm, straight blade, round edge
399.38
20 mm, straight blade, round edge
399.40
6 mm, curved blade, straight edge
399.48
3 mm, curved blade, straight edge
399.41
399.42
399.43
399.50
Hammers
350 grams
500 grams
700 grams
100 grams
399.80
399.81
399.82
Osteotomes
2 mm, 150 mm
5 mm, 150 mm
10 mm, 150 mm
Illustrations not actual size
www.synthesvet.com
4/12
Instruments
399.35
3-40
Instruments
Instruments
Chisels and Gouges
03.100.116
03.100.117
03.100.118
Curved Chisel Blades
10 mm
16 mm
25 mm
399.55
399.56
399.57
399.58
Chisel Blades
10 mm
16 mm
25 mm
5 mm
399.555
399.565
399.575
399.585
Chisel Blades, long
10 mm
16 mm
25 mm
5 mm
399.54
Chisel Handle
399.61
399.62
399.63
399.65
399.66
399.67
Gouge
5 mm, straight
10 mm, standard and straight
15 mm, straight
5 mm, curved
10 mm, curved
15 mm, curved
399.68
Hollow Gouge
for Broken Screw Exposure
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-41
Instruments
Bending Templates
329.40
For Reconstruction Plates
37 holes
329.64
22 holes, for 3.5 mm plates
329.68
16 holes, for 4.5 mm plates
329.820
329.87
329.89
For 3.5 mm LC-DCP, DCP and LCP Plates
12 holes
7 holes
9 holes
Instruments
329.55
329.57
Bending Templates
For 2.7 mm and 3.5 mm plates
5 holes
7 holes
329.89 (Side 1: LC-DCP)
329.89 (Side 2: DCP)
329.92
329.97
329.99
For 4.5 mm LC-DCP, DCP and LCP Plates
12 holes
7 holes
9 holes
329.89 (Side 1: LC-DCP)
329.89 (Side 2: DCP)
03.100.049
388.868
For 4.5 mm and 5.5 mm LCP and LC-DCP Plates
16 holes
Template, for 3.5 mm Rod
(for use with CRIF System)
Illustrations not actual size
www.synthesvet.com
4/12
3-42
Instruments
Instruments
General Instruments
314.21
Wrench for Nut (219.96)
319.15
Cannulated Screw Measuring Device, for 3.5 mm and 4.0 mm cannulated screws
319.25
1.35 mm Cleaning Brush, for use with 3.5 mm and 4.0 mm cannulated screws
319.38
1.25 mm Cleaning Stylet, for use with 3.5 mm and 4.0 mm cannulated screws
321.12
Articulated Tensioning Device
321.15
Socket Wrench with universal joint, 11.0 mm width across flats
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
3-43
Instruments
General Instruments— continued
Ratchet Wrench, 11 mm width across flats
380.05
Goniometer
380.07
Saw Guide with Adjustable Wing
03.507.000
T-Handle, hex coupling
for use with 2.4 mm Threaded Reduction Tool, 03.507.002
03.507.002
2.4 mm Threaded Reduction Tool, self-drilling, 78 mm, hex coupling
for use with T-Handle, hex coupling, 03.507.000
Instruments
321.20
Illustrations not actual size
www.synthesvet.com
4/12
4-1
Cases, Trays and Screw Racks
Graphic Cases
Mini Fragment Instrument Set Graphic Case
345 mm x 125 mm x 140 mm
690.521.10
Mini Fragment Instrument Graphic Case, no trays
690.521.11
Mini Fragment Instrument Graphic Case, lid only
Cases
and Trays
690.521
Illustrations not actual size
www.synthesvet.com
4/12
4-2
Cases, Trays and Screw Racks
Graphic Cases— continued
Instrument Tray 1, for Mini Fragment Instrument Graphic Case
690.521.30
Instrument Tray 2, for Mini Fragment Instrument Graphic Case
690.521.40
Instrument Tray 3, for Mini Fragment Instrument Graphic Case
Cases
and Trays
690.521.20
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
4-3
Cases, Trays and Screw Racks
Graphic Cases— continued
Mini Fragment Implant Set Graphic Case
255 mm x 87 mm x 250 mm
690.523
Mini Fragment Standard Implant Module
213 mm x 70 mm x 106 mm
includes five Holding Clips (319.44) for securing plates
690.524
Mini Fragment Locking Implant Module
213 mm x 70 mm x 106 mm
includes five Holding Clips (319.44) for securing plates
Illustrations not actual size
www.synthesvet.com
4/12
Cases
and Trays
690.522
4-4
Cases, Trays and Screw Racks
Cases
and Trays
Graphic Cases— continued
690.511
Small Fragment Plate Set Graphic Case
345 mm x 89 mm x 140 mm
690.511.10
Small Fragment Plate Graphic Case, no trays
690.511.11
Small Fragment Plate Graphic Case, lid only
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
4-5
Cases, Trays and Screw Racks
Graphic Cases— continued
3.5 mm Broad Plate Tray, for Small Fragment Plate Graphic Case
690.511.30
2.7 mm and 3.5 mm Plate Tray, for Small Fragment Plate Graphic Case
690.515
Small Fragment Screw Set Graphic Case,
255 mm x 87 mm x 250 mm
Screw racks not included
Illustrations not actual size
www.synthesvet.com
4/12
Cases
and Trays
690.511.20
4-6
Cases, Trays and Screw Racks
Cases
and Trays
Graphic Cases— continued
690.591
Small Fragment Instrument Set Graphic Case,
345 mm x 125 mm x 140 mm
690.591.10
Small Fragment Instrument Graphic Case, no trays
690.591.11
Small Fragment Instrument Graphic Case, lid only
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
4-7
Cases, Trays and Screw Racks
Graphic Cases— continued
Instrument Tray 1, for Small Fragment Instrument Graphic Case
690.591.30
Instrument Tray 2, for Small Fragment Instrument Graphic Case
690.591.40
Instrument Tray 3, for Small Fragment Instrument Graphic Case
Cases
and Trays
690.591.20
Illustrations not actual size
www.synthesvet.com
4/12
4-8
Cases, Trays and Screw Racks
Graphic Cases— continued
690.516
Clamp Rod Internal Fixation (CRIF) Implant Graphic Case
345 mm x 125 mm x 140 mm
Auxiliary Tray
for use with Graphic Cases
690.517
Clamp Rod Internal Fixation (CRIF) Instrument Graphic Case
345 mm x 89 mm x 140 mm
Cases
and Trays
690.516.20
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
4-9
Cases, Trays and Screw Racks
Graphic Cases— continued
Large Fragment Instrument Set Graphic Case
345 mm x 125 mm x 140 mm
690.543
Large Fragment Plate Set Graphic Case
330 mm x 250 mm x 110 mm
Cases
and Trays
690.542
Illustrations not actual size
www.synthesvet.com
4/12
4-10
Cases, Trays and Screw Racks
Graphic Cases— continued
Large Fragment Standard Screw Set Graphic Case, 5.5 mm
345 mm x 125 mm x 140 mm
690.547
Large Fragment Standard Screw Set Graphic Case, 4.5 mm/6.5 mm
345 mm x 125 mm x 140 mm
690.548
Large Fragment Locking Screw Set Graphic Case, 4.0 mm/5.0 mm
345 mm x 125 mm x 140 mm
Cases
and Trays
690.546
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
4-11
Cases, Trays and Screw Racks
Graphic Cases— continued
Tibial Plateau Leveling Osteotomy Plate Set Graphic Case,
22 mm x 33 mm x 106 mm
690.531.10
Kirschner Wire Tray, 0.6 mm – 3.0 mm, for use with Graphic Cases
Illustrations not actual size
www.synthesvet.com
4/12
Cases
and Trays
690.590
4-12
Cases, Trays and Screw Racks
Cases
301.10
301.31
301.93
301.94
Standard Aluminum Cases
310 mm x 125 mm x 65 mm
brown
blue
blue, with white lid
red, with white lid
301.01
301.49
301.81
301.82
301.90
Standard Aluminum Cases, high
310 mm x 125 mm x 80 mm
red
brown with white lid
green with red lid
green with yellow lid
red with white lid
301.96
Long Aluminum Cases
500 mm x 150 mm x 70 mm
red
Cases
and Trays
301.70
Small Aluminum Cases
220 mm x 105 mm x 40 mm
orange
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
4-13
Cases, Trays and Screw Racks
Trays
A11 (202 mm x 110 mm x 16 mm)
302.67
Implant Tray 3 (292 mm x 110 mm x 52 mm)
302.993
Screw Racks
for 4.5 mm Cortex Screws (240 mm x 122 mm x 74 mm)
306.900
for 1.5 mm and 2.0 mm Cortex Screws (90 mm x 80 mm x 33 mm)
Cases
and Trays
302.30
306.900
690.383
690.412
for Small Fragment LCP Set and 4.0 mm Cannulated Screws
for Small Fragment LCP Set and 4.0 mm Titanium Cannulated Screws
Illustrations not actual size
www.synthesvet.com
4/12
PHOTO NOT
AVAILABLE
4-14
Cases, Trays and Screw Racks
Screw Racks— continued
Locking Small Fragment Screw Rack
160 mm x 70 mm x 106 mm
(lid not shown)
690.593
Standard Small Fragment Screw Rack
213 mm x 70 mm x 106 mm
(lid not shown)
Cases
and Trays
690.592
304.388
304.389
Supplemental Screw Racks with Lid
for 2.7, 3.0, 3.5, 4.0 mm screws (200 mm x 99 mm x 131 mm)
for 1.5 mm, 2.0 mm, 2.4 mm screws (200 mm x 99 mm x 131 mm)
690.991
690.993
Screw Rack/Module Lid, short
Screw Rack/Module Lid, long
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
5-1
Reference Materials
Reference Materials
6001
6002
6003
Preoperative Planner supplies
Refill Pens, set of 3
Refill Tracing Pad, 75 sheets
Goniometer
Preoperative Planners
6501
AO Small Animal
2041
2040
2042
3006
Synthes Spine Catalog, 2011
Synthes Trauma Catalog, 2011
Synthes CMF Catalog, 2011
Synthes Vet Catalog, 2012
Illustrations not actual size
www.synthesvet.com
4/12
AO Large Animal
Reference
Materials
6502
6-1
Biomaterial Products
chronOS Beta-Tricalcium Phosphate (Beta-TCP) Bone Void Filler
710.000.98S
710.001.98S
chronOS Granules, sterile
Extra Small
Granule size
0.5 mm–0.7 mm
0.5 cc
0.7 mm–1.4 mm
0.5 cc
710.002.98S
710.003.98S
Small, 0.7 mm–1.4 mm
1.0 cc
2.5 cc
710.014.97S
710.019.97S
710.021.97S
710.011.98S
Medium, 1.4 mm–2.8 mm
5 cc
10 cc
20 cc
2.5 cc
710.025.97S
710.026.97S
710.027.97S
Large, 2.8 mm–5.6 mm
5 cc
10 cc
20 cc
Biomaterial
Products
Illustrations not actual size
www.synthesvet.com
4/12
6-2
Biomaterial Products
chronOS Beta-Tricalcium Phosphate (Beta-TCP) Bone Void Filler
chronOS Beta-TCP Blocks, sterile
12.5 mm x 12.5 mm x 10 mm
20 mm x 20 mm x 10 mm
710.050.97S
710.051.97S
710.052.97S
710.053.97S
chronOS Beta-TCP Wedges, sterile
Rectangular
10°
14°
18°
22°
710.057.97S
710.060.97S
710.063.97S
Semi-circular
7°
10°
13°
Biomaterial
Products
710.045.97S
710.047.97S
Illustrations not actual size
Instruments and implants approved by the AO Foundation
4/12
N1
Numerical Index
www.synthesvet.com
4/12
1-31
2-35
2-34
2-34
3-38
3-41
3-40
3-17
2-34
3-33
3-43
1-18
1-19
1-28
1-29
1-9
1-10
1-8
1-17
1-11
1-12
1-14
1-13
1-15
1-16
1-2
1-3
1-4
1-5
1-6
1-7
1-20
1-21
1-22
1-23
1-24
1-25
1-26
1-27
1-30
1-33
5-1
2-35
2-35
2-35
2-33
2-35
2-35
5-1
4-12
4-13
4-13
4-13
4-14
4-13
3-1
3-2
310.161
310.86-.89
310.95
310.972
310.99
311.005
311.01
311.023.97
311.15-.34
311.43
311.44
311.46-.55
311.66
312.14
312.181
312.20
312.22-.35
312.445, .449
312.46, .48
312.47
312.55
312.560
312.561
312.57
312.648
312.67
313.251, .252
313.353
313.843
313.94.96
313.96.96
313.97.96
313.99
313.993
314.00-.03
314.06-.11
314.115-.119
314.13-.17
314.21
314.27, .29
314.467
314.468
314.67.97
315.21-.48
319.006, .091
319.01-.11
319.15-.38
319.39-.97
321.12, .15
321.20
322.15-.44
322.535
323.021-.046
323.029, .034
323.053-.061
323.062
323.201, .202
3-3
3-4
3-6
3-4
3-4
3-6
3-6
3-9
3-5
3-6
3-6
3-5
3-5
3-7
3-7
3-7
3-7, 8
3-17
3-7, 8
3-7
3-8
3-8
3-18
3-7
3-17
3-8
3-9
3-17
3-11
3-9
3-9
3-12
3-9
3-10
3-10
3-12
3-10, 11
3-11
3-42
3-12
3-11
3-12
3-10
3-3
3-13
3-11
3-42
3-14
3-42
3-43
3-14
3-15
3-16
3-17
3-17
3-3
3-15
323.26
323.35
323.36
323.45
323.46
324.023-.075
329.01-.08
329.12
329.15
329.17, .18
329.142
329.143
329.241
329.24-.26
329.27-.30
329.40-.92
329.921, .922
329.97, .99
333.31-.37
333.38-.41
333.42-.53
347.965
380.03
380.05, .07
388.72
388.868
388.911, .922
391.09-.13
391.201
391.21, .23
391.80-.85
391.883, .884
391.88-.90
391.882-.906
391.990-.994
391.93-.94
391.965
391.95, .97
391.962-.967
391.990
392.00, .02
392.040
392.177-.179
392.18, .24
392.970-.974
393.105
397.441, .442
397.70, .705
398.40, .41
398.51-.53
398.65
398.79-.99
398.811-.819
398.95
398.99
399.051, .092
399.06
3-15
3-16
3-15
3-16
3-15
3-17
3-18
3-19
3-19
3-21
3-21
3-22
3-19
3-19
3-20
3-41
3-19
3-41
3-24
3-25
3-26
3-22
3-26
3-43
3-30
3-41
3-18
3-26, 27
3-27
3-28
3-28
3-27
3-29
3-29
3-30
3-30
3-22
3-31
3-31
3-30
3-31
3-32
3-32
3-32
3-33
3-32
3-17
3-32
3-35
3-33
3-33
3-34
3-34
3-34
3-34
3-35
3-35
Numerical
Index
01.240.001
02.200.003
02.111.500.10
02.111.501.10
03.100.041-.044
03.100.049
03.100.116-.118
03.111.010, .011
03.211.410-.440
03.211.400
03.507.000, .002
103.001
103.002
103.49
103.50
103.501
103.502
103.503
103.512
103.513
103.514
103.515
103.516
103.517
103.518
103.521
103.522
103.523
103.524
103.527
103.528
103.530
103.531
103.532
103.534
103.535
103.536
103.537
103.538
103.60
130.30
2040-2042
281.001S
292.652
292.656
292.73-.79
298.803S
298.837S-.839S
3006
301.01-.96
302.30
302.67
302.993
304.388, .389
306.900
309.035-.670
310.10-.55
N2
Numerical
Index
Numerical Index
399.081-.091
399.097-.098
399.121-.125
399.18-.28
399.31-.34
399.35-.48
399.49
399.50
399.54-.58
399.555-.585
399.61-.68
399.77-.79
399.80-.82
399.94-.99
6001-6003
6501, 6502
690.383
690.412
690.511
690.511.10690.511.30
690.515
690.516
690.516.20
690.517
690.521
690.521.10690.521.40
690.522-.524
690.531.10
690.542, .543
690.546-.548
690.590
690.591
690.591.10690.591.40
690.592, .593
690.991, .993
710.000.98S710.011.98S
710.014.97S710.063.97S
900.722
VC2000.01, .02
VC3000.01, .02
VC5000.01, .02
VP1000.20
VP1010.03-.50
VP1030.50
VP1061.03-.08
VP1071.03-.06
VP1072.05-.12
VP1220.05-.24
VP1230.04-.22
VP1231.06-.18
VP1300.01-.05
VP1301.01-.03
3-36
3-36
3-36
3-37
3-38
3-39
3-37
3-39
3-40
3-40
3-40
3-34
3-39
3-35
5-1
5-1
4-13
4-13
4-4
4-4, 5
4-5
4-8
4-8
4-8
4-1
4-1, 2
4-3
4-11
4-9
4-10
4-11
4-6
4-6, 7
4-14
4-14
6-1
6-1, 2
2-35
2-31
2-31
2-31
2-12
2-12
2-12
2-13
2-13
2-13
2-13
2-14
2-14
2-32
2-32
VP1302.01
VP1313.09
VP1314.09
VP1322.02-.08
VP1323.09
VP1324.09
VP1332.03
VP1342.05-.09
VP1343.03, .05
VP1344.04-.09
VP1352.03-.12
VP1370.L2, .R2
VP1371.L2, .R2
VP1380.L3, .R3
VP1381.L3, .R3
VP1410.04
VP1420.04
VP2010.04-.06
VP2011.06-.08
VP2030.02-.12
VP2040.02-.22
VP2050.07-.22
VP2060.02-.24
VP2070.06-.26
VP2500.06
VP2501.05
VP2510.L5, .R5
VP2510.L6, .R6
VP2511.L5, .R5
VP2511.L6, .R6
VP2520.05, .07
VP3011.04-.07
VP3012.06-.14
VP3021.04-.08
VP3022.08-.14
VP3031.04-.16
VP3041.02-.22
VP3051.07-.22
VP3060.02-.22
VP3070.06-.22
VP4011.04-.07
VP4012.06-.14
VP4021.04-.08
VP4022.08-.14
VP4031.04-.16
VP4041.02-.22
VP4045.07-.22
VP4051.03-.16
VP4061.06-.18
VP4071.10-.18
VP4230.04-.12
VP4312.07
VP4322.07
VP4332.07
VP4343.03-.08
VP4400.L3, .R3
VP4401.L3, .R3
Instruments and implants approved by the AO Foundation
2-32
2-14
2-14
2-15
2-15
2-15
2-15
2-16
2-16
2-16
2-16
2-16
2-16
2-17
2-17
2-17
2-17
2-18
2-18
2-18
2-18
2-19
2-19
2-19
2-20
2-20
2-20
2-20
2-20
2-20
2-20
2-21
2-21
2-21
2-21
2-21
2-22
2-22
2-23
2-23
2-24
2-24
2-24
2-24
2-24
2-25
2-25
2-26
2-26
2-27
2-27
2-27
2-27
2-27
2-28
2-29
2-29
VP4402.L4, .R4
VP4403.L3, .R3
VP4404.L3, .R3
VP4405.L3, .R3
VPT4010.20
VPT4010.04, .06
VPT4011.06, .12
VPT4013.06
VPT4014.06-.20
VPT4015.12, .20
VPT4120.14, .24
VQ0001.00-.30
VQ0002.00
VQ0002.02
VQ0002.04
VR201.030-.090
VR301.045-.120
VR501.060-.240
VS101.006-.020
VS102.006-.024
VS201.006-.040
VS202.006-.040
VS203.006-.040
VS204.006-.055
VS205.006-.055
VS206.010-.034
VS207.006-.030
VS208.006-.030
VS301.010-.070
VS302.010-.070
VS303.010-.070
VS401.014-.100
VS402.014-.100
VS403.010-.070
VS404.010-.070
VS406.014-.062
VS501.024-.100
VS502.014-.090
VS601.020-.100
VS602.030-.100
VS603.045-.100
VST202.005-.018
VST201.006, .008
VST201.010-.018
VST203.006-.012
VST211.008-.024
VST212.008-.022
VST311.008-.022
VW0402.10
VW0411.15
VW0602.10
VW0603.70
VW0604.07
VW0611.17
VW0801.28
VW0802.10
VW0803.15
2-29
2-29
2-28
2-28
2-30
2-30
2-30
2-30
2-30
2-30
2-30
3-23
3-23
3-24
3-24
2-31
2-31
2-31
2-1
2-1
2-1
2-2
2-2
2-2
2-3
2-9
2-8
2-8
2-3
2-4
2-9
2-4
2-5
2-6
2-6
2-10
2-5
2-10
2-7
2-7
2-7
2-11
2-11
2-11
2-11
2-11
2-11
2-11
2-34
2-34
2-34
2-32
2-33
2-34
2-33
2-34
2-32
4/12
N3
Numerical Index
www.synthesvet.com
4/12
2-32
2-33
2-34
2-33
2-34
2-32
2-32
2-33
2-33
2-34
2-34
2-33
2-34
2-32
2-32
2-33
2-33
2-34
2-32
2-32
2-33
2-33
2-34
2-32
2-32
2-33
2-33
2-34
2-32
2-32
2-33
2-33
2-32
2-32
2-33
2-33
2-32
2-32
2-33
2-33
2-32
2-32
2-33
2-33
2-35
2-34
2-34
2-35
2-34
2-34
Numerical
Index
VW0803.70
VW0804.07
VW0811.20
VW1001.28
VW1002.10
VW1003.15
VW1003.28
VW1004.15
VW1005.15
VW1006.7S
VW1011.25
VW1201.28
VW1202.10
VW1203.15
VW1203.28
VW1204.15
VW1205.15
VW1211.30
VW1403.15
VW1403.28
VW1404.15
VW1501.28
VW1502.10
VW1603.15
VW1603.28
VW1604.15
VW1605.15
VW1706.7S
VW1803.15
VW1803.28
VW1804.15
VW1805.15
VW2003.15
VW2003.28
VW2004.15
VW2005.15
VW2503.15
VW2503.28
VW2504.15
VW2505.15
VW3001.15
VW3003.28
VW3004.15
VW3005.15
VW3505.1S
VW3507.15
VW4007.20
VW4505.1S
VW4507.25
VW5007.25
A1
Alphabetical Index
A
B
C
Acetabular plates
Aiming instruments
Anvils for bending pliers
Articulated tensioning device
Aluminum cases
Bending irons
Bending pins
Bending pliers
Bending templates
Beta-TCP material
Biomaterials
Bone holding forceps, soft ratchet
Bone hooks
Bone spreaders, soft ratchet
www.synthesvet.com
4/12
3-18, 31
3-19
3-19–22, 28, 31
3-41
6-1, 2
6-1, 2
3-36
3-33
3-36
3-26–29
2-34
3-29
2-6
2-7
4-1–12
5-1
2-35
2-35
2-33, 34
3-26
3-40
3-40
6-1, 2
3-32
2-31
3-33
3-42
1-33
2-35
3-1
3-1
2-1
2-1, 2
2-11
2-2
2-11
2-2, 3
2-3, 4
2-4, 5
2-5
3-4
1-18, 19
3-9, 10
3-22, 3-29–32
Cut-to-length plates
D
E
F
G
H
I
K
L
DCP drill guides
DCP plates
Depth gauges
Direct measuring devices
Double drill sleeves
Double hook plates
Drill bits
Drill guides
Drill sleeves
Emergency screws
Equine General Instrument Set
Extraction bolts
Forceps
Forked impactor
Gauge for drill bits and screws
Goniometer
Gouges
Graphic cases
Guide wires
Hammers
Handles
Hexagonal screwdrivers
Hohmann retractors
Holding clip
Holding forceps
Holding sleeves
Hollow gouge
Hollow reamers
Hooks for aiming device
H-plates
2-12, 15
3-14
2-18–20
3-13
3-16
3-7, 8
2-20
3-2, 3, 26
3-7, 14, 15, 16
3-7, 8, 17, 24, 26
2-11
1-28
3-1
3-28, 33–36
3-25
3-13
3-43, 5-1
3-40
4-1–7
2-35
3-39
3-6, 9, 32, 43
3-10–12
3-37
3-14
3-28, 33–34, 36
3-12
3-40
3-1
3-24, 25
2-17
Implant trays
Implants
Instrument trays
Instruments
4-5, 13
2-1–35
4-1, 3
3-1–43
Kirschner wires
2-32, 33
Large Fragment Sets
LC-DCP drill guides
LC-DCP plates
LCP instruments
1-20–27
3-16
2-21–23
3-16, 17
Alphabetical
Index
Cable instruments
Cable with crimp
Cable crimper
Cancellous bone screws
4.0 mm
6.5 mm
Cases
Catalogs
Cerclage buttons
Cerclage positioning pin
Cerclage wires
Check tube
Chisel blades
Chisel handle
chronOS granules and shapes
Chucks
Clamps
Clamp spreaders
Cleaning brushes and stylet
Combined Aiming Device Set
Compression Wire
Conical extraction device
Conical extraction screws
Cortex screws
1.5 mm
2.0 mm
2.0 mm, titanium
2.4 mm
2.4 mm, titanium
2.7 mm
3.5 mm
4.5 mm
5.5 mm
Countersinks
CRIF Sets
Cruciform screwdrivers
Cutters
2-20
3-24–26
3-19
3-42
4-12
A2
Alphabetical Index
LCP plates
Lengthening plates
Locking screws
2.0 mm
2.0 mm, titanium
2.4 mm
2.4 mm, titanium
2.7 mm
3.0 mm, titanium
3.5 mm
4.0 mm
5.0 mm
L-plates
M
N
O
P
Alphabetical
Index
R
S
2-8
2-11
2-8
2-11
2-9
2-11
2-9
2-10
2-10
2-16, 17
Malleable bone levers
Measuring bar
Mini Fragment Sets
3-38
3-24
1-2–7
Nut
2-32
Osteotomes
3-39
Parallel drill guides
Periosteal elevators
Plate holding forceps with swivel foot
Plate-bending press
Plates
Plate and rod cutter
Pliers
Preoperative planners and supplies
Protective caps for K-wires
Push-pull reduction devices
3-7
3-38, 39
3-34
3-20
2-12–30
3-30
3-19–32
5-1
3-32
3-17
Ratchet wrench
Reconstruction plates
Reconstruction plates, LCP
Reduction forceps
Reduction Instrument Set
Reduction Wires
Retractors
Rods
Rod bender
Rod holding forceps
3-43
2-13, 14
2-27
3-34–36
1-29
2-34
3-37
2-31
3-18
3-33
Saw guide
Screw forceps
Screw racks
Screw Removal Set
Screwdrivers and screwdriver shafts
Screws
Self-centering bone forceps
Sharp hook
Small fragment sets
Small universal chuck with T-handle
Socket wrench with universal joint
Spare centering pins
Spare reamer tubes
Spiked washers
StarDrive screwdrivers
Steinmann Pins
Straight plates
2-24–28
2-13
T
U
W
Taps
Termite forceps
Threaded bending pin
Threaded drill guides
Threaded plate holders
Threaded plug
Three-fluted drill bits
TPLO instruments
TPLO plates
TPLO sets
T-plates
Triple osteotomy plates
Trays
Universal drill guides
Washers
Wire instruments
Wire Instrument and Implant Set
Wire mount
Wire sleeves
Wrench for nut
3-9–12
2-1–11
3-34
3-14
1-8–16
3-32
3-42
3-1
3-1
2-32
3-10, 11
2-34
2-12
3-5
3-34
3-17, 19
3-17
3-17
2-35
3-3
3-23, 24
2-28, 29
1-17
2-14–16, 27–28
2-20
4-2, 5, 7, 8, 13
3-15
2-32
3-28–32
1-30
2-35
3-16, 17
3-42
3-23, 43
3-14
4-3, 10, 13–14
1-31, 32
Instruments and implants approved by the AO Foundation
4/12
Printed in U.S.A. 4/12 J2406-E