Catalog Number
Notes
Type
Indoor Decorative
Wide Band
FEATURES & SPECIFICATIONS
INTENDED USE
Provides general illumination for residential and commercial applications.
Ideal for use as lighting in bathroom/lavatories, over hospital beds, hallways/
corridors, stairways and utility areas.
Vanity
ATTRIBUTES
Decorative contoured linear design complements a range of décors. Rugged
UV stabilized one-piece white diffuser provides a soft uniform illumination.
2" wide end caps offered in white, white marble, ivory marble, taupe marble, and
gray granite. Suitable for vertical or horizontal mounting. Available in 2', 3' and 4'
lengths. Optional brass or chrome twin-lined inlaid available for a custom look.
Linear T8 Fluorescent
Utilizes linear T8 fluorescent lamps for energy efficiency, superior color rendering and long life (not included).
Standard with electronic ballast (120 volt, 60Hz) ensures no flickering and quiet
operation without interfering with other electronics. Also available in other
ballast configurations.
RE ballast fixtures use non-dimmable switches only. See options for dimmable
ballast.
All mounting hardware included.
LISTING
CUL listed to US and Canadian safety standard on Residential Electronic (RE)
ballast fixtures and suitable for damp locations. ENERGY STAR® qualified. For
Non-RE ballast, UL and CSA (standard) for NOM Certified see options.
WARRANTY
Guaranteed for two years against mechanical defects in manufacture.
Optional elegant
twin-lined brass or chrome inlaid
DIMENSIONS
Nominal
Size
Lamp
Configuration
2'
Model
Number
Number
of Lamps
(A) Width
inches (cm)
(B) Length
inches (cm)
(C) Extension*
inches (cm)
11934
(2) 17W linearT8
4-7/8" (9.8)
25-5/8" (65.1)
4-1/8" (10.5)
(A)
(B)
3'
11935
(2) 25W linear T8
4-7/8" (9.8)
37-5/8" (95.6)
4-1/8" (10.5)
4'
11936
(2) 32W linear T8
4-7/8" (9.8)
49-5/8" (126.0)
4-1/8" (10.5)
* Extension from wall
(C)
All dimensions are in inches (centimeters)
ORDERING INFORMATION
Example: 11934RE FMW
Choose the boldface catalog nomenclature that best suits your needs and write it on the
appropriate line. Order accessories and replacement parts as separate catalog numbers.
Model Number1,2
11934 2' - (2) 17W linear T8
fluorescent lamps required
11935 3' - (2) 25W linear T8
fluorescent lamps required
11936 4' - (2) 32W linear T8
fluorescent lamps required
Accessories/Replacement parts
(Refer to back)
Residential Ballast3
Ballast/Voltage 4
Options
Finish
RE 120 volt residential (blank) RE ballast
GEB Electronic ballast, <20%THD WH White
electronic ballast
fixtures only GEB10IS T8 electronic ballast, <10% FMW White marble
(standard)
MVOLT Multi-volt
THD, instant start
FMI Ivory marble
(blank) Other voltage and
120 120 volt
GEB10RS T8 electronic ballast, 10%
FMT Taupe marble
ballast types
277 277 volt
THD, rapid start
FGG Gray marble
available
347 347 volt
NOM NOM certified
(see ballast/
Optional twin-lined inlaids
(Consult factory for
Other voltage and
Brass (BI) or Chrome (CI)
voltage)
other options.)
ballast types (consult
available on end caps.
factory)
Order by adding suffix to
Notes:
1. Lamps not included.
2. Use with non-dimmable switches only.
3. Residential electronic ballast standard and requires RE designation.
4. No designation for lamp type is required on RE ballast fixtures.
Light Concepts Indoor Decorative - Vanity
desired finish.
Example: FMW BI
Sheet #: WIBV
DEC-338
Wide Band Vanity
PHOTOMETRICS
Full photometric data report available within 2 weeks from request. Consult factory.
Sheet #: WIBV
©2008 Acuity Brands Lighting, Inc.
Rev. 3/10
WIBV.pmd
Consumer Products
One Lithonia Way, Conyers, GA 30012
Phone: 800-748-5070 Fax: 770-860-3903
In Canada: 160 Avenue Labrosse, Point-Claire, P.Q., H9R 1A1
www.lightahome.com