Lab Services Pte Ltd
10 Ubi Crescent #04-79
Ubi Techpark, Lobby D
Singapore 408564
Certificate No.
:
LA-2001-0226-B
Issue No.
:
17
Date
:
11 September 2015
Page
:
1 of 4
FIELD OF TESTING : Civil Engineering Testing
MATERIALS /
PRODUCTS TESTED
A. Soils
TESTS/PROPERTIES
STANDARD METHODS /
TECHNIQUES
1.
Moisture Content
ASTM D2974 : 07a
BS 1377 : Part 2 : 1990
2.
Specific Gravity
ASTM D854 : 06
3.
Liquid Limit
(Cone Penetration Method)
ASTM D4318 : 05
BS 1377 : Part 2 : 1990
4.
Plastic Limit & Plasticity Index
ASTM D4318 : 1998
BS 1377 : Part 2 : 1990
5.
Sieve Analysis
ASTM D422 : 1963 Re-approved 2007
6.
Hydrometer Analysis
ASTM D422 : 1963 Re-approved 2007
7.
Density
(Linear Measurement Method)
8.
Particle Density
9.
Particle Size Distribution
) BS 1377 : Part 2 : 1990
)
)
) BS 1377 : Part 2 : 1990
)
)
10. One Dimensional Consolidation
BS 1377 : Part 5 : 1990
11. Unconfined Compressive
Strength
ASTM D2166 : 06
BS 1377 : Part 7 : 1990
12. Unconsolidated Undrained
Triaxial Compression Test
ASTM D2850 : 03a
BS 1377 : Part 7 : 1990
Certificate No. :
LA-2001-0226-B
Issue No. :
17
Date
11 September 2015
Page
2 of 4
:
MATERIALS /
PRODUCTS TESTED
:
TESTS / PROPERTIES
STANDARD METHODS /
TECHNIQUES
13. Unconsolidated Undrained
Triaxial Compression Test with
Multistage loading
BS 1377 : Part 7 : 1990
14. Consolidated Undrained Traxial
Compression Test with Pore
Pressure Measurement
15. Consolidated Drained Traxial
Compression with Volume
Change Measurement
) ASTM D4767 : 04
) BS 1377 : Part 8 : 1990
)
)
)
)
)
13.
14.
15.
16.
pH Value
Organic Matter Content
Sulphate Content
Chloride Content
) BS 1377 : Part 3 : 1990
)
)
)
17. Dry Density/Moisture Content
Relationship
BS 1377 : Part 4 : 1990
18. Falling Head Permeability
KH. Head Vol. 2
19. Determination of permeability
In triaxial cell
BS 1377 : Part 6 : 1990
20. Oedometer
ASTM D2435 : 04
21. Compaction
ASTM D698 : 07
ASTM D1557 : 09
22. California Bearing Ratio (CBR)
BS 1377 : Pt 4 : Test 7 : 1990
ASTM D1883 : 07
23. Direct Shear Test
BS 1377 : Part 7 Test 4 : 1990
ASTM D3080 : 07
24. Soil Resistivity Test
BS 1377 : Part 3 Test 10 : 1990
25. Soil Thermal Conductivity Test
ASTM D5334 : 08
26. Soil Thermal Resistivity Test
IEEE 442 : 1981
Certificate No. :
LA-2001-0226-B
Issue No. :
17
Date
11 September 2015
Page
3 of 4
:
MATERIALS /
PRODUCTS TESTED
:
TESTS / PROPERTIES
STANDARD METHODS /
TECHNIQUES
27. Rapid Determination of
Carbonate Content of Soils
ASTM D4373-02:2007
28. Unconsolidated-Undrained
Triaxial Compression with pore
pressure measurement
BS 1377 : Part 7/8 : 1990QM 2.14, Aug 2010
29. Constant Head Permeability
BS 1377 : Part 5 : 1990
ASTM D 2434 : 2006
30. Laboratory Vane
BS1377 : Part 7 :1990
31. Consolidated Undrained Direct
Simple Shear Test
ASTM D6528 : 07
32. Cyclic Direct Simple Shear Testing
Norsok Standard G-001 (Rev.2,
Oct 2004) – Test No. 4.6
33. Shell content of fine aggregate
(Sand) by ignition method
SANS 5840:2008
B. Ground Water
1.
2.
3.
pH Value
Sulphate Content
Chloride Content
) BS 1377 : Part 3 : 1990
)
)
C. Rock
1.
Slake Durability Test
ASTM D4644 : 08
2.
Point Load Test
ASTM D5731 : 08
3.
Splitting Tensile Strength of
Intact Rock Core Specimen
ASTM D3967 : 08
4.
Unconfined Compressive
Strength of Intact Rock Core
ASTM D7012 : 10
5.
Determination of Abrasiveness of
Rock using Cerchar Method
ASTM D7625 : 10
6.
Triaxial Compressive Strength of
Undrained Rock Core Specimens
without Pore Pressure)
Measurements. (Method A
ASTM D7012 : 10
Certificate No. :
LA-2001-0226-B
Issue No. :
17
Date
11 September 2015
Page
4 of 4
:
:
Approved signatories
Mr Samuel Teng
) For all tests accredited
Mr David Teng
)
Mr Nyan Tun Lin Soe
) A1, A3, A7-A15, C1-C6
Note :
This laboratory is accredited in accordance with the recognised International Standard ISO/IEC 17025:2005.
A laboratory's fulfilment of the requirements of ISO/IEC 17025:2005 means the laboratory meets both the
technical competence requirements and management system requirements that are necessary for it to
consistently deliver technically valid test results. The management system requirements In ISO/IEC
17025:2005 (Section 4) are written in language relevant to laboratory operations and meet the principles of
ISO 9001:2008 Quality Management Systems — Requirements and are aligned with its pertinent
requirements.