CURRICULUM VITAE
Ahmed Adel Mohammed Fahmy
KPC Reservoir Engineer
Address
: Benha-Kalubia-Egypt
Work
: +202 27063477
Mobile
: +2012 24063272
Email
: ahmed.adel@khalda-eg.com
: eng.ahmed4work@gmail.com
PERSONAL BIO
Date & Place of Birth
: 5 Feb 1983 – Benha, Egypt.
Citizenship
: Egyptian.
Marital status
: Married.
Military Service Status
: Fully Exempted
QUALIFICATIONS
May-2005
: BSc in Petroleum Engineering, Faculty of Petroleum &
Mining Engineering, Suez Canal University.
General Grade
: Good.
Project Grade
: Very Good.
KEY COMPETENCIES
 Simulation

Estimate OOIP/OGIP using Petrel and ECLIPS programs.

Reservoir Characterization using simulation modelling.

Performing complete reservoir simulation study using Petrel RE & Eclipse100.

Reservoir evaluation via different development strategies using simulation
modeling ( Petrel and Eclipse) to determine wells location ( infilled or
delineated), wells spacing, number of wells and so on.

Build the Static Model using PETREL G&G.
 Conventional work




Estimate OOIP/OGIP via different methods (volumetric method, material balance,
simulation).
Perform complete reservoir management study.
Production optimization using (PROSPER, GAP).
Open Hole Logs analysis.

RFT interpretations and analysis.

Decline Curve Analysis to establish proven developed reserves (PDP) and Oil
behind casing estimation (PDNP) to calculate the proven undeveloped reserves
(PUD).

Water Injection and Flooding application.

Well Test Design.

Analyze pressure transient tests (PBU, PDD).

Working on PVTP for QC the PVT reports.

Using OFM software for database, production performance & forecasting.
WORK HISTORY
From graduation(May-2005) up to now
Working in Khalda Petroleum Company, Egypt as a Reservoir Engineer
 The activities and achievements included:
1. Simulation Work(three years):

Now working in Khalda simulation team for oil and gas fields using Petrel
and Eclipse software.

Performing many simulations modelling (Static & Dynamic modelling)
using Petrel and Eclipse softwares.
The recent simulation models in Khalda during the last months:
1. HAYAT-59 well AEB-3E active water drive reservoir water coning study.
2. SAFIR-17 well AEB-3E active water drive reservoir to select the best
action between Pump Upgrade and Water shut off (Pump Upgrade).
3. Simulation model for perforation selection in expected water coning case
to select the best completion.
4. PHIOPS AEB-3E, D & G model development plan.
5. QASR Lower Safa reservoir for compression project (+/- 20 wells).
6. YSR-47 Dump Flooding model.
7. JADE-Oil Reservoir full field development plan.
8. JADE-GAS Reservoir Compression Study.
9. Water Coning Study.
10. QASR Lower Safa Top Reservoir full field development.
2. Conventional Work(three years):

Participation in reservoir evaluation and interpretation activities using the
available production data.

Determination of Original hydrocarbon in Place (OOIP & GIIP) and estimate the
different reserves categories by linking up different methods, Material Balance
Calculations, Volumetric Calculations, Decline Curve Analysis and reservoir
modelling (PETREL & ECLIPSE).

Recommendation of optimum production strategies and development plans (infill
wells, Recompilations, & work over, stimulation, shut-off watered out zones).
Selection and interpretation the RFT for further investigation of the zonal
depletion, the fluid gradients and contacts.
Analyzing open hole logs to develop the suitable zone completion or recompletion. Analyzing cased hole logs PLT, TDT & Flowing – Build Up pressure
surveys to come up with the suitable remedial actions.



Sampled, analyzed, and validated the PVT data for oil reservoirs using PVTP
program.

Evaluation and analysis of conventional and special core analysis and linking up
with reservoir studies.
Recommendations for water flooding strategy and analyse the data for optimum
production.
Perform economic studies and economic evaluation for any project.




Participation in solving operational problems by discussing the
technical issues with the corresponding personnel of other branches
(drilling and production).
Monitor the performance of the old wells through surveillance plan; pressure
surveys, production logs, DFL and production tests.

Generation and matching of vertical flow performance (VFP) tables using
PROSPER to be used in simulation models.

Good Experience in Petroleum Eng work (WORK OVER).

Applied many of hydraulic fracturing jobs to increase the well productivities. Also,
I manage many of the injector wells.

Applied many of water flooding and injection projects and increasing the RF% of
the reservoir.
TECHNICAL SOFTWARE PROGRAMS

Petroleum Expert Software (IPM Package) to evaluating and forecasting
reservoir production and reserves.
1. PVTP, for QC the PVT reports.
2. MBAL, determine OOIP & OGIP and to perform prediction.
3. Prosper, for Production Optimization & nodal analysis.
4. Gap, Production optimization for the field overall and monitoring the
production performance.

Bivius, RFT analysis.

PanSystem Software, (Transient Test Analysis Package) for well
test analysis.

OFM software ( Database, production performance & forecasting)

Reservoir modeling
1. PETREL-RE, building static models and dynamic modeling preparing.
2. ECLIPSE, for dynamic modeling (history matching and prediction).
3. Pre-processing using Petrel G&G, Eclipse Office
4. Post-processing using Petrel-RE, FLOVIZ.
TRAINING

ECLIPS course.

Course in Open hole wire-line logging and interpretations By Khalda
Petroleum Co. (Aug-06).

Course in Water Flooding in APACHE (Feb-07).

Course in Reservoir management (Feb-08).

Production optimization course.

PVT course.

Modern well test in OGS.

Applied reservoir engineering course.
LANGUAGE
Arabic
English
:
:
mother tongue
(very good writing and speaking)
COMPUTER SKILLS



MS office.
Programming (Visual basic).
Hardware and software.
Best Regards