Casper Oil Tools, LLC is dedicated to providing good service, good prices, and excellent quality of downhole packers and tools with knowledgeable, certified, and experienced people to help with today’s workover and completion needs. All of our field employees are certified at WellCAP Well Control School Company Bio~ Casper Oil Tools, LLC was founded in 1996. It was founded on the premise of Quality products and service at reasonable and fair prices. Casper Oil Tools has worked extensively in Southwest Wyoming, Northeast Utah, and Northwest Colorado. COT worked with McMurry Oil by providing products and services for them in the development of their Jonah field sites. Later, COT worked with McMurry Energy on the development of their Pinedale Anticline field. All of this work was performed by our trained personnel with Wireline Set Tubing Retrievable Bridge Plugs, with only two minor problems in seven years. All COT field personnel have attended and received certification from Well Control School, and have current drilling/workover well control certification. Our staff is dedicated to our primary goal of providing quality products and services, and has fifty-plus years combined experience in the fields of Oil and Natural Gas production. We use our experience in the oil and gas industry to make the best possible recommendations available, while keeping a constant vigil to maintain reasonable prices for our clients. COT is also an authorized service center to install and remove composite lined and duo lined tubular products. Casper Oil Tools, LLC Located at: 2200 Commerce Street #1 Rock Springs, Wyoming 82901 Mailing Address: PO Box 2107 Rock Springs, Wyoming 82902 Phone: Fax: 307-382-5897 307-382-4992 Email Contacts: Randy Moeller, CEO consultant87@hotmail.com 307-350-9473 Josette Bott, Office Manager josettebott@hotmail.com Allen Bott, Saleman/Toolhand allenbott@hotmail.com 307-350-5468 Michael Moeller, Salesman/Toolhand mmoeller30@hotmail.com 307-350-9472 Description: The Casper Oil Tools “BA” Anchors the tubing to maintain tension in the tubing string and as a tubing catcher to prevent parted pipe from falling to the bottom of the well. Applications: Most rod pumping applications where it is important to maintain tension in the tubing. Features: 1. 2. 3. 4. Rotate left to set, right to release Straight pull emergency shear release Increases pump efficiency Improves operating costs by reducing maintenance and down time caused by tubing or sucker rod wear 5. Parts interchangeable with other manufactures N-80 Grade 2-3/8 by 1.875 X nipples 2-3/8 by 1.875 XN nipples 2-7/8 by 2.313 X nipples 2-7/8 by 2.313 XN nipples Frac Hardened 2-3/8 by 1.875 X nipples 2-3/8 by 1.875 XN nipples 2-7/8 by 2.313 X nipples 2-7/8 by 2.313 XN nipples Description: The Casper Oil Tool “Ultra-Lok” is a compression set, retrievable packer that allows the tubing to be left in a tension, compression, or neutral condition Applications: Most production, injection, and zone isolation operations Features: 1. 2. 3. 4. 5. 6. 7. 8. 9. Internal by-pass Opposing dovetail slips for positive set Holds pressure from above or below Can leave tubing in a tension, compression, or neutral condition Right hand rotation sets and releases the packer Retracted dovetail slips Converts to mechanical bridge plug with the addition of a valve Parts interchangeable with other manufacturers Optional packing element systems Description: The Casper Oil Tools “H” is a high pressure valve that converts a packer into a bridge plug. Applications: Used with neutral set packers to create a temporary bridge plug for acidizing, fracturing, cementing, casing pressure tests, well head replacement and zone isolation. Features: 1. 2. 3. 4. 5. 6. 7. Balanced equalizing system Large by-pass area minimizes plugging by debris Open during running or pulling Strong jay pins are not threaded to the fishing neck Retrieving head is auto-on jay, left hand release Full bore retrieving head permits through tubing perforating By-pass valve can be opened and closed without releasing the packer 8. Resists closing while circulating fluids Description: The Casper Oil Tools Model D Tubing Swivel has a large variety of uses. It can be used when a power swivel is not necessary. Applications: To wash sand, wireline through, or to use in cementing applications. Features: 1. Standard 2-7/8 8RD connection 2. Top is left hand thread, so there’s no chance for back off Description: The Casper Oil Tools “WRP” is a wireline set, packer type, retrievable bridge plug capable of holding differential pressure from above 10K or below 7500 psi Applications: Temporary bridge plug for acidizing, fracturing, cementing, casing pressure tests, well head replacement and zone isolation Features: 1. Wireline, hydraulic, or coiled tubing set 2. Caged bi-directional slips 3. Balanced equalizing system 4. By-pass valve opens before plug is released 5. Straight pull release 6. Rotational safety release mechanism 7. Over shot will wash to gage ring 8. Optional sandline or coiled tubing retrieve 9. Swab resistant packing element system 10.Utilizes parts common with other Production Oil Tools packers 11.Compact design Description: The Casper Oil Tools Auto-J pulling tool is an automatic on mechanism used to release and retrieve the WRP bridge plug on tubing or coiled tubing. Applications: Used for the retrieval of WRP bridge plugs Features: 1. The 4 ½ retrieving head has a 3.75 OD 2. The 5 ½ retrieving head has a 4.5 OD 3. The bottom is notched so you can wash sand off the top of the plug 4. 2-7/8 RD box for 5 ½ plug 5. 2-3/8 RD box for 4 ½ plug Description: The Casper Oil Tools Hydraulic Bit Release Sub is a disconnect device used to remove the drill bit or mill after drilling operations Applications: Used for drilling out composite plugs and allowing pump off to leave tubing open for production Features: 1. 2. 3. 4. 5. 6. 7. 8. 9. Eliminates tubing trip after drill out High strength High torque Hydraulic release Full open after release Field adjustable shear pressure Wireline entry guide after release All parts contained in bottom sub after shear out Uses standard float valves HYDRAULIC BIT RELEASE SUB SPECIFICATION GUIDE SIZE 2-3/8 2-7/8 3-1/2 THREADS 2-3/8 EU x 2-3/8 APE Reg. 2-7/8 EU x 2-7/8 API Reg. 3-41/2 EU x 3-1/2 API Reg. OD 3-1/8” 3-3/4” 4-1/4” “MST” Description: The Casper Oil Tools “MST” is a mechanical setting tool for drillable cement retainers and bridge plugs Applications: Setting cement retainers or bridge plugs on tubing or drill pipe. Features: 1. Allows single run for squeeze work 2. Locked to bridge plug or cement retainer to avoid premature setting or loss 3. Top slips of retainer are partially covered to protect from accidental damage. 4. Modular design 5. Will set other manufacturers bridge plugs or cements retainers 6 Valve 10K manifold Description: The Casper Oil Tools PCR is a modular designed drillable cement retainer. Applications: Acidizing, fracturing or cementing with a cement retainer Features: 1. Simple surface control valve 2. Allows tubing pressure test before squeezing 3. Valve automatically closes when the stinger is picked up, locking in the squeeze pressure 4. Valve protects sensitive zones in low fluid wells 5. Simple conversion to bridge plug 6. Mechanical or wireline set 7. Easily drilled “Top Set CIBP” Description: The Casper Oil Tools Top Set CIBP is a modular designed drillable bridge plug. Applications: Temporary or permanent zone isolation or well abandonment. Features: 1. Wireline or mechanical set 2. Slimline allows for quick wireline runs 3. Bridging plug on top for equalization before you get to the slips 4. Easily drillable “CIFP” Description: Provides economical temporary zone isolation for fracturing or other treatments Applications: Used to allow flow from lower zones in-between fracs Features: 1. 2. 3. 4. 5. 6. 7. 8. 9. Cost effective and dependable Nitrile elastomer element system One piece, full circle slips Materials are compatible with P-110 casing Easily drilled Cast iron construction Cast iron ball is contained within mandrel For temporary or permanent service Ratcheting lock ring holds setting force. “CIBP” Description: The Casper Oil Tools CIBP is a modular designed drillable bridge plug Applications: Used for temporary and permanent zone isolation or well abandonment Features: 1. Wireline or mechanical set 2. Slimline design allows for quick wireline runs 3. Simple conversion to cement retainer 4. Easily drilled Description: The Casper Oil Tools Full Bore is a heavy duty, tension set retrievable squeeze packer. Applications: Treating, testing, fracturing, and squeeze cementing. Features: 1. 2. 3. 4. 5. Hold pressure from above or below Multiple reset without tripping workstring Circulate with slips set Right hand set Right hand rotational safety release Description: The Casper Oil Tools “PFL” is a left hand release, tubing disconnect device that has an internal lock profile for securing low control equipment. Applications: Allows the tubing to be disconnected and re-connected without disturbing the packer. Designed for use with neutral set packers such as the Baker “Ultra-Lok.” The internal lock profile is used to retain flow control devices such as plugs, valves, chokes or regulators Features: 1. 2. 3. 4. 5. 6. Left hand release (standard) Optional right hand release Bonded seals allow multiple disconnects Auto jay engagement Baker type “F” and “R” internal lock profiles are standard Can be pinned in a shear-up or shear-down position ****ALL adapter kits are for use with Baker Setting Tools**** WRP: 4 ½”—Baker #10 setting tool 5 ½”—Baker #20 setting tool 7”—Baker #20 setting tool CIBP and Cement Retainer: 4 ½”—Baker #10 setting tool 5 ½”-7”—Baker #20 setting tool 5 ½” Permanent Packer—Baker #20 setting tool 4 ½” Topset CIBP—Baker #10 setting tool 4 ½” CIFP—Baker #10 setting tool Description: The Casper Oil Tools Full Bore Unloader Sub is a tubing operated, circulating and unloading sub. Applications: Applications include: Spotting, equalizing and circulating above any packer designed to permit tension while set. Features: 1. Easy to operate- Apply set-down weight to open and upstrain to close 2. Unloads pressure from either direction 3. May be run in open or closed position, then opened or closed as many times as required 4. Allows unrestricted fluid by-pass when run in the open position 5. Provides full torque transmission for packer operations Description: The Casper Oil Tools “PAD-1” is a tension set, retrievable packer. Applications: Water flood, shallow or low fluid level wells with insufficient tubing weight to set compression packers. Features: 1. 2. 3. 4. 5. 6. 7. Compact J-slot control for normal set and release Shear ring secondary release Right-hand safety join emergency release Rocker type slips Inexpensive Parts interchangeable with other manufacturers Description: The Casper Oil Tools “PSTH” bridge plug is a high pressure, mechanical, compression set, packer type bridge plug that is capable of holding pressure from above of below and is compatible with most left hand set packers. Applications: Applications include temporary bridge plugs for acidizing, fracturing, casing pressure tests, well head replacement, zone isolation, and cementing. Features: 1. 2. 3. 4. 5. 6. Right hand set, right hand release Caged bi-directional slips Balanced equalizing system By-pass valve opens before the plug is released Over shot will wash to gage ring Balance piston arrangement enables the packing elements to hold equal pressure from above or below 7. Utilizes parts common with other Casper Oil Tools’ packers 8. Full circle lock segments prevent mandrel damage and enhance the plugs ability to release 9. Bearing system reduces torque requirements for releasing 10.5 slips eliminate casing damage 11.6 drag blocks allow good control during setting/releasing 12.Can run additional devices below the plug (Pressure bombs) 13.Anti-swab packing element system 14.By-pass valve can be opened and closed without releasing the packer 15.Optional frac ball catcher kit is available Description: The Casper Oil Tools “HDR-3” is a ¼ turn, compression set, retrievable packer capable of holding differential pressure from above or below. Applications: Acidizing, fracturing, squeeze cementing and casing tests. Features: 1. 2. 3. 4. 5. 6. 7. Left hand set, right hand release Hydraulic hold down for differential pressure from below Built-in unloader Large bypass area Large number of drag clocks for good control Dovetailed slips ¾ turn cam mechanism Description: The Casper Oil Tools “PR-3” is a compression set, double grip, retrievable packer. Applications: Most production, stimulation, and testing operations. Features: 1. Differential lock helps keep the by-pass closed and locked to the mandrel during high pressure operations 2. Automatically returns to run-in position when moved up the hole 3. Hydraulic hold-down for differential pressure from below 4. Long stroke mandrel simplifies circulation of fluids without releasing the packer 5. Large by-pass allows speedy equalization of fluids 6. Rocker type slips 7. Parts interchangeable with other manufacturers Description: The Casper Oil Tools “CST” is a ¼ turn compression set, retrievable packer capable of holding differential pressure from above or below. Applications: Acidizing, fracturing, and squeeze cementing and casing tests Features: 1. 2. 3. 4. 5. 6. Hydraulic hold-down for differential pressure from below Built in unloader Large by-pass area Large number of drag blocks for good control Caged slips Optional ¾ turn cam mechanism Description: Casper Oil Tools 1X10K effectively meets several requirements for zone isolation, injection, pumping and production. Full opening gives unrestricted flow and allows the passage of wireline tools and other accessories. A mechanical lock-set action holds substantial pressures from above or below the packer, whether the packer is left in tension, compression, or neutral. When releasing, the bypass opens first to equalize pressures before releasing the upper slips. Applications: Used for zone isolation, injection, pumping and production Features: 1. Patented releasing slip system reduces the force required to release the packer 2. Bypass valve below upper slips so the debris is washed from slips when valve is opened 3. Bypass valve opens before hold down in released 4. Can be set with tension for use in shallow wells 5. No tension or compression required to hold the tool in place after set 6. ¼ turn right hand set, right hand release 7. Rotational safety release 8. Optional adjustable straight pull shear safety release Description: The Casper Oil Tools casing scrapers are for use when drillingup cement to help ensure the casing is clean. They can also be used on new wells to ensure any burrs or tight spots are found before running in retrievable tools. 4 ½”, 5”, 5 ½”, and 7” If you have any questions about prices or quotes please feel free to contact us at our office at 307-382-5897. We would be happy to answer any question that you may have.