ISO Update
Supplement to ISOfocus
January 2016
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 December to 31 December 2015
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 2
Fasteners
ISO/CD 898-3
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Washers
TC 17
Steel
ISO/CD 14404-3
Calculation method of carbon dioxide emission intensity from iron and steel production — Part 3: Steel plant with electric arc
furnace (EAF) and coal-based or gas-based direct reduction iron (DRI) facility
TC 20
Aircraft and space vehicles
ISO/CD 18676
Space Systems — Guidelines for the management of systems engineering processes
TC 22
Road vehicles
ISO/CD 26262-1
Road vehicles — Functional safety — Part 1: Vocabulary
ISO/CD 26262-2
Road vehicles — Functional safety — Part 2: Management of functional safety
ISO/CD 26262-3
Road vehicles — Functional safety — Part 3: Concept phase
ISO/CD 26262-4
Road vehicles — Functional safety — Part 4: Product development at the system level
ISO/CD 26262-5
Road vehicles — Functional safety — Part 5: Product development at the hardware level
ISO/CD 26262-6
Road vehicles — Functional safety — Part 6: Product development at the software level
ISO/CD 26262-7
Road vehicles — Functional safety — Part 7: Production and operation
ISO/CD 26262-8
Road vehicles — Functional safety — Part 8: Supporting processes
ISO/CD 26262-9
Road vehicles — Functional safety — Part 9: Automotive safety integrity level (ASIL)-oriented and safety-oriented analyses
ISO/CD 26262-10
Road vehicles — Functional safety — Part 10: Guideline on ISO 26262
ISO/CD 26262-11
Road vehicles — Functional safety — Part 11: Application of concepts for semiconductors
ISO/CD 26262-12
Road vehicles — Functional safety — Part 12: Adaptation for motorcycles
TC 28
Petroleum products and related products of synthetic or biological origin
ISO/CD 2977
Petroleum products and hydrocarbon solvents — Determination of aniline point and mixed aniline point
ISO/DTR 19686100
Petroleum products — Equivalency of test method determining the same property — Part 100: Background and principle of
the comparison and the evaluation of equivalency
TC 29
Small tools
ISO/DTS 13399305
Cutting tool data representation and exchange — Part 305: Creation and exchange of 3D models - Modular tooling systems
with adjustable cartridges for boring
TC 34
Food products
ISO/CD TS 34700
Animal welfare management — General requirements and guidance for organizations in the food supply chain
ISO/CD 676
Spices and condiments — Botanical nomenclature
ISO/CD 1208
Spices and condiments — Determination of filth
ISO/CD 22000
Food safety management systems — Requirements for any organization in the food chain
TC 35
Paints and varnishes
ISO/CD 6270-3
Paints and varnishes — Determination of resistance to humidity — Part 3: Rotatory method
TC 45
Rubber and rubber products
ISO/CD 7619-1
Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness)
ISO/CD 1795
Rubber, raw natural and raw synthetic — Sampling and further preparative procedures
ISO/CD 15825
Rubber compounding ingredients — Carbon black — Determination of aggregate size distribution by disc centrifuge photosedimentometry
ISO/CD 28641
Rubber compounding ingredients — Organic chemicals — General test methods
TC 59
Buildings and civil engineering works
ISO/CD 15686-7
Buildings and constructed assets — Service life planning — Part 7: Performance evaluation for feedback of service life data
from practice
TC 60
Gears
ISO/DTR 10064-1
Code of inspection practice — Part 1: Inspection of corresponding flanks of gear teeth
TC 61
Plastics
ISO/CD 178
Plastics — Determination of flexural properties
ISO/CD 10093
Plastics — Fire tests — Standard ignition sources
ISO/CD 15023-2
Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 2: Determination of properties
ISO/CD 16770-1
Plastics — Determination of environmental stress cracking (ESC) of polyethylene — Full-notch creep test (FNCT) — Part 1:
Standard method
ISO/CD 16770-2
Plastics — Determination of environmental stress cracking (ESC) of polyethylene — Full-notch creep test (FNCT) — Part 2:
Accelerated method
ISO/CD 10352
Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area
ISO/CD 11567
Carbon fibre — Determination of filament diameter and cross-sectional area
TC 92
Fire safety
ISO/CD 20902
Fire separating elements exposed to engulfing hydrocarbon fires
TC 94
Personal safety -- Protective clothing and equipment
ISO/CD 18639-6
PPE ensembles for firefighters undertaking specialist rescue activities — Part 6: Footwear
TC 106
Dentistry
IEC/CD 80601-260
Medical electrical equipment — Part 2-60: Particular requirements for basic safety and essential performance of dental
equipment
TC 120
Leather
ISO/CD 17551
Leather — Pickled sheep pelts — Guidelines for grading on the basis of defect and size
TC 130
Graphic technology
ISO/CD 12636
Graphic technology — Blankets for offset printing
TC 131
Fluid power systems
ISO/DTS 11672
Connectors for fluid power and general use — Designation and nomenclature
TC 147
Water quality
ISO/CD 20236
Water quality — Determination of total organic carbon (TOC), dissolved organic carbon (DOC) and bound nitrogen (TNb)
after oxidative high temperature combustion
TC 172
Optics and photonics
ISO/CD 11979-7
Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations
ISO/CD 11979-10
Ophthalmic implants — Intraocular lenses — Part 10: Phakic intraocular lenses
ISO/DTR 22979
Ophthalmic implants — Intraocular lenses — Guidance on assessment of the need for clinical investigation of intraocular
lens design modifications
TC 176
Quality management and quality assurance
ISO/DTS 9002
Quality management systems — Guidelines for the application of ISO 9001:2015
TC 185
Safety devices for protection against excessive pressure
ISO/CD 4126-2
Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices
TC 202
Microbeam analysis
ISO/CD 19463
Microbeam Analysis - Electron probe microanalysis instruments utilizing wavelength dispersive spectrometers - quality assurance
TC 204
Intelligent transport systems
ISO/CD 16460
Intelligent transport systems — Communications access for land mobiles (CALM) — Communication protocol messages for
global usage
TC 229
Nanotechnologies
ISO/DTS 13278
Nanotechnologies — Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
TC 249
Traditional chinese medicine
ISO/CD 20409
Traditional Chinese medicine--Panax Notoginseng Root and Rhizome
TC 256
Pigments, dyestuffs and extenders
ISO/CD 18473-3
Functional pigments and extenders for special applications — Part 3: Fumed silica for silicone rubber application
TC 285
Clean cookstoves and clean cooking solutions
ISO/CD 19867-1
Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: General laboratory test
sequence
JTC 1
Information technology
ISO/IEC PDTR
29181-9
Future network — Problem statement and requirements — Part 9: Networking of everything
ISO/IEC CD
11770-4
Information technology — Security techniques — Key management — Part 4: Mechanisms based on weak secrets
ISO/IEC CD
15946-5
Information technology — Security techniques — Cryptographic techniques based on elliptic curves — Part 5: Elliptic curve
generation
ISO/IEC 144965:2001/PDAM 41
Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 41: Reference software for Internet Video Coding
ISO/IEC 144965:2001/PDAM 42
Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 42: Reference software for Alternative Depth Information SEI message
ISO/IEC 230024:2014/PDAM 3
Information technology — MPEG video technologies — Part 4: Video tool library — Amendment 3: FU and FN descriptions
for Parser Instantiation from BSD
ISO/IEC 230034:2015/PDAM 1
Information technology — MPEG audio technologies — Part 4: Dynamic Range Control — Amendment 1: Parametric DRC,
gain mapping and equalization tools
ISO/IEC 230091:2014/PDAM 4
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation description and
segment formats — Amendment 4: Segment Independent SAP Signalling (SISSI), MPD chaining, MPD reset and other
extensions
ISO/IEC CD
19086-3
Information technology — Cloud computing — Service level agreement (SLA) framework — Part 3: Core conformance requirements
DIS circulated
Period from 01 December to 31 December 2015
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
REMCO
ISO/DGuide 35
Committee on reference materials
*
Reference materials — Guidance for the characterization and the assessment of the homogeneity and stability of the material
(Revision of ISO Guide 35:2006)
TC 8
ISO/DIS 19030-1
ISO/DIS 19030-2
ISO/DIS 19030-3
ISO/DIS 15540
Ships and marine technology
*
*
*
*
Ships and marine technology — Measurement of changes in hull and propeller performance
— Part 1: General principles
2016-03-15
Ships and marine technology — Measurement of changes in hull and propeller performance
— Part 2: Default method
2016-03-15
Ships and marine technology — Measurement of changes in hull and propeller performance
— Part 3: Alternative methods
2016-03-16
Ships and marine technology — Fire resistance of non-metallic hose assemblies and nonmetallic compensators — Test methods
2016-03-04
(Revision of ISO 15540:1999, ISO 15540:1999/Cor 1:1999)
ISO/DIS 15541
*
Ships and marine technology — Fire resistance of non-metallic hose assemblies and nonmetallic compensators — Requirements for the test bench
2016-03-04
(Revision of ISO 15541:1999)
IEC/IEEE DIS
80005-2
Utility connections in port — Part 2: High and low voltage shore connection systems — Data
communication for monitoring and control
TC 20
Aircraft and space vehicles
ISO/DIS 21076
ISO/DIS 21077
*
*
Space data and information transfer systems — Space communications cross support —
Architecture requirements document
2016-03-22
2016-03-10
Space data and information transfer systems — Digital motion imagery
2016-03-11
ISO/DIS 21080
ISO/DIS 21082
*
*
Space data and information transfer systems — Licklider transmission protocol (LTP) for
CCSDS
2016-03-10
Mission operations — Mal space packet transport binding and binary encoding
2016-03-10
ISO/DIS 17770
*
Space systems — Cube satellites (CubeSats)
2016-03-10
TC 22
ISO/DIS 11898-2
Road vehicles
*
Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
2016-03-17
(Revision of ISO 11898-2:2003)
ISO/DIS 179877.2
*
ISO
16380:2014/DAm
d1
*
TC 23
Road vehicles — Local Interconnect Network (LIN) — Part 7: Electrical Physical Layer (EPL)
conformance test specification
2016-03-11
Road vehicles — Blended fuels refuelling connector — Amendment 1
2016-03-15
Tractors and machinery for agriculture and forestry
ISO/DIS 20383
*
Tractors and machinery for agriculture and forestry — Speed Identification Symbol (SIS)
2016-03-04
ISO/DIS 56821.2
*
Equipment for crop protection — Spraying equipment — Part 1: Test methods for sprayer
nozzles
2016-02-16
(Revision of ISO 5682-1:1996)
Equipment for crop protection — Spraying equipment — Part 2: Test methods to assess the
horizontal transverse distribution for hydraulic sprayers
ISO/DIS 56822.2
2016-02-16
(Revision of ISO 5682-2:1997)
ISO/DIS 56823.2
*
Equipment for crop protection — Spraying equipment — Part 3: Test method to assess the
performance of volume / area adjustement systems
2016-02-16
(Revision of ISO 5682-3:1996)
TC 29
ISO/DIS 3364
Small tools
*
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole —
Dimensions
2016-03-22
(Revision of ISO 3364:2011)
ISO/DIS 1085
*
Assembly tools for screws and nuts — Double-ended wrenches — Size pairing
2016-03-04
(Revision of ISO 1085:1999)
ISO/DIS 3318
*
Assembly tools for screws and nuts — Double-headed open-ended wrenches, double-headed
box wrenches and combination wrenches — Maximum widths of heads
2016-03-04
(Revision of ISO 3318:2009)
ISO/DIS 4229
*
Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque
applications — Maximum outside dimensions of heads and test torques
2016-03-04
(Revision of ISO 4229:2009)
TC 37
ISO/DIS 24624
Terminology and other language and content resources
*
Language resource management — Transcription of spoken language
2016-03-16
ISO/DIS 2603
*
Simultaneous interpreting — Permanent booths — Requirements
2016-03-18
(Revision of ISO 2603:1998)
ISO/DIS 4043
*
Simultaneous interpreting — Mobile booths — Requirements
2016-03-18
(Revision of ISO 4043:1998)
ISO/DIS 20109
*
Simultaneous interpreting — Equipment — Requirements
2016-03-18
TC 43
ISO/DIS 10140-4
Acoustics
*
Acoustics — Laboratory measurement of sound insulation of building elements — Part 4:
Measurement procedures and requirements
2016-03-04
(Revision of ISO 10140-4:2010)
TC 54
ISO/DIS 3848
Essential oils
*
Essential oil of citronella, Java type
2016-03-04
(Revision of ISO 3848:2001, ISO 3848:2001/Cor 1:2002)
ISO/DIS 13171
*
Essential oil of oregano [Origanum vulgare L. ssp. hirtum (Link) Ietsw]
2016-03-11
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical
and natural gas industries
ISO/DIS 165301.2
*
ISO/DIS 10855-1
*
ISO/DIS 10855-2
ISO/DIS 10855-3
ISO/DIS 19905-3
2016-03-18
*
*
*
TC 69
ISO/DIS 7870-8
Petroleum and natural gas industries — Well integrity — Part 1: Life cycle governance
Offshore containers and associated lifting sets — Part 1: Offshore container - Design, manufacture and marking
2016-03-11
Offshore containers and associated lifting sets — Part 2: Lifting sets — Design, manufacture
and marking
2016-03-11
Offshore containers and associated lifting sets — Part 3: Periodic inspection, examination and
testing
2016-03-11
Petroleum and natural gas industries — Site-specific assessment of mobile offshore units —
Part 3: Floating unit
2016-03-11
Applications of statistical methods
*
Control charts — Part 8: Charting techniques for short runs and small mixed batches
2016-03-16
TC 82
ISO/DIS 19224
Mining
*
Continuous surface miner (CSM) - Safety
2016-03-24
ISO/DIS 19296.2
*
TC 85
ISO/DIS 18417
Mining and earthmoving machinery — Mobile machines working underground — Machine
Safety
2016-02-18
Nuclear energy, nuclear technologies, and radiological protection
*
Iodine charcoal sorbents for nuclear facilities — Method for defining sorption capacity index
2016-03-24
TC 89
ISO/DIS 27769
Wood-based panels
*
Wood-based panels — Wet-process fibreboard
2016-03-16
(Revision of ISO 27769-1:2009, ISO 27769-2:2009)
ISO
2074:2007/DAmd
1
*
Plywood — Vocabulary — Amendment 1
2016-03-24
TC 92
ISO/DIS 24678-6
Fire safety
*
TC 94
ISO/DIS 27065.2
Fire safety engineering — Requirements governing algebraic equations — Part 6: Flashover
related phenomena
2016-03-24
Personal safety -- Protective clothing and equipment
*
Protective clothing — Performance requirements for protective clothing worn by operators
applying liquid pesticides and for re-entry workers
2016-02-18
(Revision of ISO 27065:2011)
TC 106
ISO/DIS 7787-3
Dentistry
*
Dentistry — Laboratory cutters — Part 3: Tungsten carbide cutters for milling machines
2016-03-17
(Revision of ISO 7787-3:1991)
ISO/DIS 17509.2
*
Dentistry — Torque transmitter for handpieces
2016-02-11
TC 113
ISO/DIS 6416
Hydrometry
*
Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method
2016-03-04
(Revision of ISO 6416:2004)
TC 122
ISO/DIS 19709-1
Packaging
*
TC 135
ISO/DIS 20339
2016-03-24
Non-destructive testing
*
TC 138
ISO/DIS 7432
Transport packaging — Small load container systems — Part 1: Common requirements and
test methods
Non-destructive testing — Equipment for eddy current examination — Array probe characteristics and verification
2016-03-04
Plastics pipes, fittings and valves for the transport of fluids
*
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the
design of locked socket-and-spigot joints, including double-socket joints, with elastomeric
seals
2016-03-15
(Revision of ISO 7432:2002)
TC 146
ISO/DIS 20581
ISO/DIS 12219-7
Air quality
*
*
TC 147
ISO/DIS 9696
Workplace air — General requirements for the performance of procedures for the measurement of chemical agents
2016-03-11
Interior air of road vehicles
— Part 7: Odour determination in interior air of road vehicles
and test chamber air of trim components by olfactory measurements
2016-03-15
Water quality
*
Water quality — Measurement of gross alpha activity in non-saline water — Thick source
method
(Revision of ISO 9696:2007)
2016-03-15
ISO/DIS 10253
*
Water quality — Marine algal growth inhibition test with Skeletonema sp. and Phaeodactylum
tricornutum
2016-03-18
(Revision of ISO 10253:2006)
TC 150
ISO/DIS 18192-3
ISO/DIS 19213
Implants for surgery
*
*
Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 3: Loading
and displacement parameters for impingement-wear testing and corresponding environmental
conditions for test of lumbar prostheses under adverse kinematic conditions
2016-03-24
Implants for surgery — Test methods of material for use as a cortical bone model
2016-03-16
TC 165
ISO/DIS 18100
Timber structures
*
Timber structures — Finger jointed timber — Manufacturing and production requirements
2016-03-15
TC 173
ISO/DIS 7176-2
Assistive products for persons with disability
*
Wheelchairs — Part 2: Determination of dynamic stability of electric wheelchairs
2016-03-03
(Revision of ISO 7176-2:2001)
TC 204
ISO/DIS 1563810
Intelligent transport systems
*
Intelligent transport systems — Framework for cooperative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 10: Emergency messaging system/eCall
(EMS)
2016-03-16
(Revision of ISO/TS 15638-10:2013)
ISO/DIS 1563818
*
Intelligent transport systems — Framework for cooperative telematics applications for regulated commercial freight Vehicles (TARV) — Part 18: ADR (Dangerous Goods)
2016-03-24
(Revision of ISO/TS 15638-18:2013)
ISO/DIS 24102-6
*
TC 206
ISO/DIS 19722
2016-03-04
Fine ceramics
*
TC 219
ISO/DIS 10833
Intelligent transport systems — Communications access for land mobiles (CALM) — ITS
station management — Part 6: Path and flow management
Fine ceramics (advanced ceramics, advanced technical ceramics)- Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption
2016-03-17
Floor coverings
*
Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test
2016-03-04
(Revision of ISO 10833:2001)
TC 238
ISO/DIS 14780
Solid biofuels
*
Solid biofuels — Sample preparation
2016-03-18
TMBG
ISO/IEC DIS
80079-20-1
Technical Management Board - groups
*
Explosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification
— Test methods and data
2016-03-05
JTC 1
Information technology
ISO/IEC DIS
19513
*
ISO/IEC DIS
11695-3
*
Information technology — Object management group unified profile for DoDAF and MODAF
(UPDM)
2016-03-22
Identification cards — Optical memory cards — Holographic recording method — Part 3:
Optical properties and characteristics
2016-03-24
(Revision of ISO/IEC 11695-3:2008)
ISO/IEC DIS
17839-3.2
ISO/IEC DIS
9075-1.2
*
Information technology — Biometric System-on-Card — Part 3: Logical information interchange mechanism
2016-02-24
Information technology — Database languages — SQL — Part 1: Framework
(SQL/Framework)
2016-02-17
(Revision of ISO/IEC 9075-1:2011)
ISO/IEC DIS
9075-2.2
Information technology — Database languages — SQL — Part 2: Foundation
(SQL/Foundation)
2016-02-17
(Revision of ISO/IEC 9075-2:2011, ISO/IEC 9075-2:2011/Cor 1:2013, ISO/IEC 90752:2011/Cor 2:2015)
ISO/IEC DIS
9075-3.2
Information technology — Database languages — SQL — Part 3: Call-Level Interface
(SQL/CLI)
2016-02-17
(Revision of ISO/IEC 9075-3:2008)
ISO/IEC DIS
9075-4.2
Information technology — Database languages — SQL — Part 4: Persistent Stored Modules
(SQL/PSM)
2016-02-17
(Revision of ISO/IEC 9075-4:2011)
ISO/IEC DIS
9075-9.2
Information technology — Database languages — SQL — Part 9: Management of External
Data (SQL/MED)
2016-02-17
(Revision of ISO/IEC 9075-9:2008, ISO/IEC 9075-9:2008/Cor 1:2010)
ISO/IEC DIS
9075-10.2
Information technology — Database languages — SQL — Part 10: Object Language Bindings
(SQL/OLB)
2016-02-17
(Revision of ISO/IEC 9075-10:2008, ISO/IEC 9075-10:2008/Cor 1:2010)
ISO/IEC DIS
9075-11.2
Information technology — Database languages — SQL — Part 11: Information and Definition
Schemas (SQL/Schemata)
2016-02-17
(Revision of ISO/IEC 9075-11:2011)
ISO/IEC DIS
9075-13.2
Information technology — Database languages — SQL — Part 13: SQL Routines and Types
Using the Java TM Programming Language (SQL/JRT)
2016-02-17
(Revision of ISO/IEC 9075-13:2008, ISO/IEC 9075-13:2008/Cor 1:2010)
ISO/IEC DIS
9075-14.2
Information technology — Database languages — SQL — Part 14: XML-Related Specifications (SQL/XML)
(Revision of ISO/IEC 9075-14:2011, ISO/IEC 9075-14:2011/Cor 1:2013, ISO/IEC 907514:2011/Cor 2:2015)
2016-02-17
FDIS circulated
Period from 01 December to 31 December 2015
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 6
ISO/FDIS
8254-3
Paper, board and pulps
*
Paper and board — Measurement of specular gloss — Part 3: 20 degree gloss with a converging beam, TAPPI method
2016-02-28
(Revision of ISO 8254-3:2004)
TC 22
ISO/FDIS
14513
Road vehicles
*
Road vehicles — Pedestrian protection — Head impact test method
2016-02-15
(Revision of ISO 14513:2006, ISO 14513:2006/Cor 1:2007)
TC 31
ISO/FDIS
10571
Tyres, rims and valves
*
Tyres for mobile cranes and similar specialized machines
2016-02-15
(Revision of ISO 10571:2011)
TC 34
ISO/FDIS
8968-4
Food products
*
Milk and milk products — Determination of nitrogen content — Part 4: Determination of protein
and non protein nitrogen content and true protein content calculation (Reference method)
2016-02-18
(Revision of ISO 8968-4:2001, ISO 8968-5:2001)
ISO/FDIS
18744
*
ISO/FDIS 9936
*
Microbiology of the food chain — Detection and enumeration of Cryptosporidium and Giardia in
fresh leafy green vegetables and berry fruits
2016-02-11
Animal and vegetable fats and oils — Determination of tocopherol and tocotrienol contents by
high-performance liquid chromatography
2016-02-04
(Revision of ISO 9936:2006, ISO 9936:2006/Cor 1:2008, ISO 9936:2006/Amd 1:2011)
ISO/FDIS
15753
*
Animal and vegetable fats and oils — Determination of polycyclic aromatic hydrocarbons
2016-02-11
(Revision of ISO 15753:2006, ISO 15753:2006/Amd 1:2011)
TC 35
ISO/FDIS
16773-1
Paints and varnishes
*
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens —
Part 1: Terms and definitions
2016-02-11
(Revision of ISO 16773-1:2007)
ISO/FDIS
16773-2
*
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens —
Part 2: Collection of data
2016-02-11
(Revision of ISO 16773-2:2007)
ISO/FDIS
16773-3
*
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens —
Part 3: Processing and analysis of data from dummy cells
2016-02-11
(Revision of ISO 16773-3:2009)
TC 36
ISO/FDIS
12612
Cinematography
*
Cinematography — Interchange of post-production materials
2016-02-15
(Revision of ISO 12612:1997)
TC 42
ISO/FDIS
22028-1
Photography
*
Photography and graphic technology — Extended colour encodings for digital image storage,
manipulation and interchange — Part 1: Architecture and requirements
2016-02-15
(Revision of ISO 22028-1:2004, ISO 22028-1:2004/Cor 1:2007)
TC 43
ISO/FDIS
17208-1
Acoustics
*
Underwater acoustics — Quantities and procedures for description and measurement of underwater sound from ships — Part 1: Requirements for precision measurements in deep water
used for comparison purposes
2016-02-15
(Revision of ISO/PAS 17208-1:2012)
TC 46
ISO/FDIS
15489-1
Information and documentation
*
Information and documentation — Records management — Part 1: Concepts and principles
2016-02-08
(Revision of ISO 15489-1:2001)
TC 51
ISO 86112:2011/FDAmd
1
Pallets for unit load method of materials handling
*
TC 54
ISO/FDIS 3527
Pallets for materials handling — Flat pallets — Part 2: Performance requirements and selection
of tests — Amendment 1
2016-02-11
Essential oils
*
Essential oil of parsley fruits (Petroselinum sativum Hoffm.)
2016-02-15
(Revision of ISO 3527:2000)
TC 68
ISO/FDIS
13491-1
Financial services
*
Financial services — Secure cryptographic devices (retail) — Part 1: Concepts, requirements
and evaluation methods
(Revision of ISO 13491-1:2007)
2016-02-22
ISO/FDIS
13491-2
*
Financial services — Secure cryptographic devices (retail) — Part 2: Security compliance
checklists for devices used in financial transactions
2016-02-22
(Revision of ISO 13491-2:2005)
TC 106
ISO/FDIS
18556
Dentistry
*
2016-02-18
TC 114
ISO/FDIS 1413
Dentistry — Intraoral spatulas
Horology
*
Horology — Shock-resistant wrist watches
2016-02-08
(Revision of ISO 1413:1984)
TC 134
Fertilizers and soil conditioners
ISO/FDIS
15604
*
ISO/FDIS
25475
*
ISO/FDIS
25705
*
Fertilizers — Determination of ammoniacal nitrogen
Fertilizers — Determination of urea condensates using high-performance liquid chromatography
(HPLC) — Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B)
2016-02-11
Ergonomics
*
TC 182
ISO/FDIS
17892-4
2016-02-11
2016-02-11
TC 159
ISO/FDIS
24505
Fertilizers — Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
Ergonomics — Accessible design — Method for creating colour combinations taking account of
age-related changes in human colour vision
2016-02-07
Geotechnics
*
Geotechnical investigation and testing — Laboratory testing of soil — Part 4: Determination of
particle size distribution
2016-02-04
(Revision of ISO/TS 17892-4:2004, ISO/TS 17892-4:2004/Cor 1:2006)
TC 184
IEC/FDIS
62264-4
Automation systems and integration
*
TC 204
ISO/FDIS
24534-3
Enterprise-control system integration — Part 4: Objects and attributes for manufacturing operations management integration
2016-02-05
Intelligent transport systems
*
Intelligent transport systems — Automatic vehicle and equipment identification — Electronic
registration identification (ERI) for vehicles — Part 3: Vehicle data
2016-02-04
(Revision of ISO 24534-3:2010)
TC 207
ISO/FDIS
14004
Environmental management
*
Environmental management systems — General guidelines on implementation
2016-02-04
(Revision of ISO 14004:2004)
TC 249
Traditional chinese medicine
ISO/FDIS
18668-1
*
TC 257
ISO/FDIS
17741
Traditional Chinese medicine — Coding system of Chinese medicines — Part 1: Coding rules
for Chinese medicines
2016-02-08
Evaluation of energy savings
*
JTC 1
General technical rules for measurement, calculation and verification of energy savings of projects
2016-02-15
Information technology
ISO/IEC FDIS
19770-3
*
ISO/IEC FDIS
7816-15
*
Information technology — IT asset management — Part 3: Entitlement schema
2016-02-19
Identification cards — Integrated circuit cards — Part 15: Cryptographic information application
2016-02-08
(Revision of ISO/IEC 7816-15:2004, ISO/IEC 7816-15:2004/Amd 1:2007, ISO/IEC 781615:2004/Cor 1:2004, ISO/IEC 7816-15:2004/Amd 2:2008)
ISO/IEC FDIS
14443-1
*
Identification cards — Contactless integrated circuit cards — Proximity cards — Part 1: Physical
characteristics
2016-02-10
(Revision of ISO/IEC 14443-1:2008, ISO/IEC 14443-1:2008/Amd 1:2012)
ISO/IEC FDIS
30190
*
Information technology — Digitally recorded media for information interchange and storage —
120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Recordable disk
2016-02-10
(Revision of ISO/IEC 30190:2013, ISO/IEC 30190:2013/Cor 1:2015)
ISO/IEC FDIS
30192
*
Information technology — Digitally recorded media for information interchange and storage —
120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk
2016-02-11
(Revision of ISO/IEC 30192:2013, ISO/IEC 30192:2013/Cor 1:2015)
ISO/IEC FDIS
30193
*
Information technology — Digitally recorded media for information interchange and storage —
120 mm Triple Layer (100,0 Gbytes per disk) BD Rewritable disk
2016-02-11
(Revision of ISO/IEC 30193:2013, ISO/IEC 30193:2013/Cor 1:2015)
ISO/IEC
138181:2015/FDAmd
4
*
ISO/IEC FDIS
23005-2
*
Information technology — Generic coding of moving pictures and associated audio information
— Part 1: Systems — Amendment 4: New profiles and levels for MPEG4 audio descriptor
2016-02-08
Information technology — Media context and control — Part 2: Control information
2016-02-17
(Revision of ISO/IEC 23005-2:2013)
ISO/IEC FDIS
23005-4
*
Information technology — Media context and control — Part 4: Virtual world object characteristics
2016-02-17
(Revision of ISO/IEC 23005-4:2013)
ISO/IEC FDIS
23005-5
*
Information technology — Media context and control — Part 5: Data formats for interaction devices
2016-02-17
(Revision of ISO/IEC 23005-5:2013)
ISO/IEC FDIS
23005-6
*
Information technology — Media context and control — Part 6: Common types and tools
2016-02-17
(Revision of ISO/IEC 23005-6:2013)
ISO/IEC
230085:2015/FDAmd
1
ISO/IEC FDIS
24779-1
*
ISO/IEC FDIS
30134-1
*
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 5: Reference software for high efficiency video coding — Amendment 1: Reference software for format range extensions profiles
2016-02-23
Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Pictograms, icons and symbols for use with biometric systems — Part 1:
General principles
2016-02-22
Information technology — Data centres — Key performance indicators — Part 1: Overview and
general requirements
2016-02-10
Standards published
New International Standards published between 01 December and 31 December 2015
* Available in English only
** French version of standard previously published in English only
Price group
TC 4
Rolling bearings
ISO 152421:2015
Rolling bearings — Measuring methods for vibration — Part 1: Fundamentals
ISO 152422:2015
Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical
bore and outside surface
B
ISO
21107:2015
Rolling bearings and spherical plain bearings — Search structure for electronic media — Characteristics and performance criteria identified by property vocabulary
E
ISO 3245:2015
Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
B
C
TC 8
Ships and marine technology
ISO
29404:2015
*
ISO 5488:2015
*
Ships and marine technology — Offshore wind energy — Supply chain information flow
F
Ships and marine technology — Accommodation ladders
B
ISO 7061:2015
*
Ships and marine technology — Aluminium shore gangways for seagoing vessels
B
ISO
17905:2015
*
TC 17
ISO 4991:2015
Ships and marine technology — Installation, inspection and maintenance of container securing devices for ships
D
Steel
*
Steel castings for pressure purposes
D
ISO
14737:2015
*
Carbon and low alloy cast steels for general applications
B
ISO 69352:2015
Steel for the reinforcement of concrete — Part 2: Ribbed bars
TC 21
Equipment for fire protection and fire fighting
ISO 145201:2015
D
*
TC 22
Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General
requirements
H
Road vehicles
ISO 118981:2015
*
ISO
17409:2015
*
ISO
18246:2015
*
ISO
19449:2015
*
Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
G
Electrically propelled road vehicles — Connection to an external electric power supply — Safety requirements
D
Electrically propelled mopeds and motorcycles — Safety requirements for conductive connection to an
external electric power supply
E
Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance
B
TC 23
Tractors and machinery for agriculture and forestry
ISO 179891:2015
Tractors and machinery for agriculture and forestry — Sustainability — Part 1: Principles
ISO 7216:2015
Agricultural and forestry tractors — Measurement of noise emitted when in motion
C
A
ISO
21628:2008/A
md 1:2015
*
XZ
TC 28
ISO
10976:2015
Petroleum products and related products of synthetic or biological origin
*
Refrigerated light hydrocarbon fluids — Measurement of cargoes on board LNG carriers
G
TC 34
ISO
19344:2015
Gardening machinery — Powered material-collecting systems — Safety — Amendment 1
Food products
*
Milk and milk products — Starter cultures, probiotics and fermented products — Quantification of
lactic acid bacteria by flow cytometry
D
ISO 183631:2015
Animal and vegetable fats and oils — Determination of fatty-acid-bound chloropropanediols (MCPDs)
and glycidol by GC/MS — Part 1: Method using fast alkaline transesterification and measurement for
3-MCPD and differential measurement for glycidol
ISO/TR
17622:2015
Molecular biomarker analysis — SSR analysis of sunflower
TC 38
Textiles
ISO 163731:2015
Textiles — Dyestuffs — Part 1: General principles of testing coloured textiles for dyestuff identification
A
C
ISO 180801:2015
*
ISO 180802:2015
*
ISO 180803:2015
*
ISO 180804:2015
*
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 1: Test method
using corona charging
C
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 2: Test method
using rotary mechanical friction
C
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 3: Test method
using manual friction
C
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 4: Test method
using horizontal mechanical friction
B
ISO
18782:2015
Textiles — Determination of dynamic hygroscopic heat generation
TC 39
Machine tools
ISO 107911:2015
Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle
(horizontal Z-axis)
TC 42
Photography
ISO
19084:2015
C
*
H
Photography — Digital cameras — Chromatic displacement measurements
C
TC 46
ISO 7098:2015
B
Information and documentation
*
Information and documentation — Romanization of Chinese
D
ISO
11799:2015
*
Information and documentation — Document storage requirements for archive and library materials
B
ISO
30302:2015
Information and documentation — Management systems for records — Guidelines for implementation
TC 48
Laboratory equipment
ISO 384:2015
Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
E
C
ISO 3819:2015
Laboratory glassware — Beakers
A
ISO 4797:2015
Laboratory glassware — Boiling flasks with conical ground joints
A
TC 58
Gas cylinders
ISO 210072:2015
Gas cylinders — Identification and marking using radio frequency identification technology — Part 2:
Numbering schemes for radio frequency identification
TC 61
Plastics
ISO 149102:2013
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion
— Part 2: Preparation of test specimens and determination of properties
ISO 63831:2015
Plastics — Film and sheeting — Determination of tear resistance — Part 1: Trouser tear method
TC 69
Applications of statistical methods
C
A
ISO/TR
13195:2015
*
ISO 163551:2015
*
Selected illustrations of response surface method — Central composite design
G
TC 70
ISO/TS
19425:2015
F
Application of statistical and related methods to new technology and product development process —
Part 1: General principles and perspectives of Quality Function Deployment (QFD)
G
Internal combustion engines
*
Reciprocating internal combustion engines — Measurement method for air cleaners — Sound power
level of combustion air inlet noise and insertion loss using sound pressure
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical
and pharmaceutical use
ISO 83621:2009/Amd
1:2015
Injection containers and accessories — Part 1: Injection vials made of glass tubing — Amendment 1
TC 83
Sports and other recreational facilities and equipment
ISO 8061:2015
Alpine ski-bindings — Selection of release torque values
D
XZ
A
ISO
11088:2015
*
Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system
C
TC 85
Nuclear energy, nuclear technologies, and radiological protection
Radiological protection — Monitoring and internal dosimetry for specific materials — Part 1: Inhalation
of uranium compounds
F
ISO 207853:2015
Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 3: Measurements at aviation
altitudes
C
ISO 219091:2015
Passive neutron dosimetry systems — Part 1: Performance and test requirements for personal dosimetry
F
ISO 166381:2015
*
ISO
29661:2012/A
md 1:2015
*
ISO
*
Reference radiation fields for radiation protection — Definitions and fundamental concepts —
Amendment 1: Reference point of personal dosemeters
Guidance for gamma spectrometry measurement of radioactive waste
XZ
19017:2015
F
TC 92
Fire safety
ISO
13344:2015
Estimation of the lethal toxic potency of fire effluents
ISO/TS
29761:2015
C
*
Fire safety engineering — Selection of design occupant behavioural scenarios
D
TC 94
Personal safety -- Protective clothing and equipment
ISO 121271:2015
Clothing for protection against heat and flame — Determination of contact heat transmission through
protective clothing or constituent materials — Part 1: Contact heat produced by heating cylinder
TC 100
Chains and chain sprockets for power transmission and conveyors
ISO
15654:2015
Fatigue test method for transmission precision roller chains and leaf chains
TC 108
Mechanical vibration, shock and condition monitoring
ISO/TS 1483732:2015
F
*
TC 110
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic properties of the ground
G
Industrial trucks
ISO 108965:2015
*
ISO 108966:2015
*
ISO 184791:2015
*
Rough-terrain trucks — Safety requirements and verification — Part 5: Interface between roughterrain truck and integrated personnel work platform
A
Rough-terrain trucks — Safety requirements and verification — Part 6: Tilting operator's cabs
A
Rough-terrain trucks — Non-integrated personnel work platforms — Part 1: Design, safety requirements and verification
ISO 2291513:2012/Cor
1:2013
Industrial trucks — Verification of stability — Part 13: Rough-terrain trucks with mast — Technical
Corrigendum 1
TC 114
Horology
ISO 31602:2015
Watch-cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness,
corrosion resistance and adhesion
TC 118
Compressors and pneumatic tools, machines and equipment
ISO 289278:2009/Amd
1:2015
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 8: Saws,
polishing and filing machines with reciprocating action and small saws with oscillating or rotating action — Amendment 1: Polishing machines, modified feed forces
TC 126
Tobacco and tobacco products
ISO 6565:2015
Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods —
Standard conditions and measurement
TC 130
ISO
12632:2015
B
A
free
C
XZ
D
Graphic technology
*
Graphic technology — Ink, paper and labels — Requirements on hot alkali penetration and resistance
A
TC 135
Non-destructive testing
ISO 185633:2015
Non-destructive testing — Characterization and verification of ultrasonic phased array equipment —
Part 3: Combined systems
TC 146
Air quality
ISO
17733:2015
Workplace air — Determination of mercury and inorganic mercury compounds — Method by coldvapour atomic absorption spectrometry or atomic fluorescence spectrometry
TC 147
Water quality
ISO
13167:2015
Water quality — Plutonium, americium, curium and neptunium — Test method using alpha spectrometry
TC 149
Cycles
ISO 6695:2015
*
E
G
D
Cycles — Pedal axle and crank assembly with square end fitting — Assembly dimensions
A
ISO
14878:2015
*
Cycles — Audible warning devices — Technical specification and test methods
A
TC 150
Implants for surgery
ISO
7199:2009/Am
d 1:2012
Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) — Amendment
1: Clarifications for test methodologies, labelling, and sampling schedule
TC 155
Nickel and nickel alloys
ISO/TS
18223:2015
*
TC 156
ISO
21207:2015
*
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to
corrosion-promoting gases, neutral salt-spray and drying
*
Unwanted reflections from the active and inactive areas of display surfaces visible during use
C
Ergonomics — Accessible design — Sound pressure levels of spoken announcements for products
and public address systems
TC 160
Glass in building
*
D
Glass in building — Pendulum impact testing and classification of safety glass
F
TC 164
Mechanical testing of metals
ISO 75001:2015
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
ISO
B
Ergonomics
ISO
24504:2014
ISO
29584:2015
C
Corrosion of metals and alloys
TC 159
ISO/TR
20278:2015
Nickel alloys — Determination of Nickel content — Inductively coupled plasma atomic emission spectrometric method
XZ
*
Metallic materials — Measurement of fracture toughness at impact loading rates using precracked
C
26843:2015
Charpy-type test pieces
TC 172
Optics and photonics
ISO/TR
19498:2015
*
Ophthalmic optics and instruments — Correlation of optotypes
A
ISO
11810:2015
Lasers and laser-related equipment — Test method and classification for the laser resistance of surgical drapes and/or patient protective covers — Primary ignition, penetration, flame spread and secondary ignition
TC 173
Assistive products for persons with disability
ISO
19026:2015
E
*
Accessible design — Shape and colour of a flushing button and a call button, and their arrangement
with a paper dispenser installed on the wall in public restroom
TC 174
Jewellery
ISO
18323:2015
Jewellery — Consumer confidence in the diamond industry
TC 178
Lifts, escalators and moving walks
D
A
B
Comparison of worldwide escalator and moving walk safety standards — Part 1: Rule by rule comparison
H
Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments
G
ISO 257452:2015
Energy performance of lifts, escalators and moving walks — Part 2: Energy calculation and classification for lifts (elevators)
C
TC 182
Geotechnics
ISO/TR 147991:2015
*
ISO/TR 147992:2015
*
ISO 178923:2015
*
TC 184
ISO/PAS
19450:2015
Geotechnical investigation and testing — Laboratory testing of soil — Part 3: Determination of particle
density
Automation systems and integration
*
Automation systems and integration — Object-Process Methodology
H
TC 189
Ceramic tile
ISO 130075:2015
Ceramic tiles — Grouts and adhesives — Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic
tiling bonded with adhesives
TC 197
Hydrogen technologies
ISO/TR
15916:2015
B
*
D
Basic considerations for the safety of hydrogen systems
G
TC 199
Safety of machinery
ISO 138491:2015
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO
19353:2015
Safety of machinery — Fire prevention and fire protection
H
E
TC 201
ISO
14606:2015
Surface chemical analysis
*
Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials
C
TC 204
Intelligent transport systems
ISO
12855:2015
Electronic fee collection — Information exchange between service provision and toll charging
TC 206
Fine ceramics
ISO
26424:2008
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the abrasion
resistance of coatings by a micro-scale abrasion test
TC 209
Cleanrooms and associated controlled environments
ISO 146441:2015
Cleanrooms and associated controlled environments — Part 1: Classification of air cleanliness by
particle concentration
F
ISO 146442:2015
Cleanrooms and associated controlled environments — Part 2: Monitoring to provide evidence of
cleanroom performance related to air cleanliness by particle concentration
C
TC 211
Geographic information/Geomatics
H
ISO
19103:2015
*
ISO 191601:2015
*
Geographic information — Conceptual schema language
H
Addressing — Part 1: Conceptual model
G
TC 215
Health informatics
ISO/TS
13582:2015
*
ISO
13940:2015
*
ISO/TS 168432:2015
*
ISO/TS
19844:2015
*
Health informatics — Sharing of OID registry information
E
Health informatics — System of concepts to support continuity of care
H
Health informatics — Categorial structures for representation of acupuncture — Part 2: Needling
B
Health informatics — Identification of medicinal products — Implementation guidelines for data elements and structures for the unique identification and exchange of regulated information on substances
TC 219
Floor coverings
ISO
18168:2015
Textile floor coverings — Colour fastness to shampooing
TC 228
Tourism and related services
ISO/TS
13811:2015
TC 229
C
H
A
*
Tourism and related services — Guidelines on developing environmental specifications for accommodation establishments
Nanotechnologies
B
ISO/TR
17302:2015
*
Nanotechnologies — Framework for identifying vocabulary development for nanotechnology applications in human healthcare
TC 238
Solid biofuels
ISO
17828:2015
Solid biofuels — Determination of bulk density
ISO 178311:2015
Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets
ISO 178312:2015
Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 2: Briquettes
TC 261
Additive manufacturing
ISO/ASTM
52900:2015
Additive manufacturing — General principles — Terminology
TC 292
Security and resilience
ISO
18788:2015
Management system for private security operations — Requirements with guidance for use
IULTCS
International Union of Leather Technologists and Chemists Societies
ISO
19074:2015
Leather — Physical and mechanical tests — Determination of water absorption by capillary action
(wicking)
JTC 1
Information technology
D
B
B
A
A
H
ISO/IEC
11889-1:2015
*
ISO/IEC
11889-2:2015
*
ISO/IEC
11889-3:2015
*
ISO/IEC
11889-4:2015
*
ISO/IEC
19845:2015
*
ISO/IEC/IEEE
8802-A:2015
*
ISO/IEC/IEEE
29119-4:2015
*
ISO/IEC 78119:2015
*
ISO/IEC
*
A
Information technology — Trusted Platform Module Library — Part 1: Architecture
H
Information technology — Trusted Platform Module Library — Part 2: Structures
H
Information technology — Trusted Platform Module Library — Part 3: Commands
H
Information technology — Trusted Platform Module Library — Part 4: Supporting Routines
H
Information technology — Universal Business Language Version 2.1 (UBL v2.1)
H
Information technology — Telecommunications and information exchange between systems — Local
and metropolitan area networks — Part A: Overview and architecture
G
Software and systems engineering — Software testing — Part 4: Test techniques
H
Identification cards — Recording technique — Part 9: Tactile identifier mark
A
Identification cards — ICC-managed devices — Part 1: General framework
18328-1:2015
C
ISO/IEC TR
20004:2015
*
ISO/IEC
1449627:2009/Amd
6:2015
*
ISO/IEC
18477-3:2015
*
ISO/IEC
23001-12:2015
*
ISO/IEC
230091:2014/Cor
2:2015
*
ISO/IEC
248002:2011/Amd
1:2015
*
ISO/IEC
248003:2010/Amd
1:2015
*
ISO/IEC
11179-1:2015
*
ISO/IEC TR
18121:2015
*
Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance —
Amendment 6: Pattern-based 3D mesh coding conformance
XZ
Information technology — Scalable compression and coding of continuous-tone still images — Part 3:
Box file format
F
Information technology — MPEG systems technologies — Part 12: Sample Variants in the ISO base
media file format
C
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation description and segment formats — Technical Corrigendum 2
free
Information technology — JPSearch — Part 2: Registration, identification and management of schema
and ontology — Amendment 1: JPEG Ontology for Image Description
G
Information technology — JPSearch — Part 3: Query format — Amendment 1: JPSearch API
Information technology — Metadata registries (MDR) — Part 1: Framework
D
Information technology — Learning, education and training — Virtual experiment framework
C
Information technology — Service management — Part 10: Concepts and terminology
D
*
Information technology — Service management — Part 11: Guidance on the relationship between
ISO/IEC 20000-1:2011 and service management frameworks: ITIL®
Standards confirmed
The following International Standards are confimred for a five year period:
TC 20
C
XZ
ISO/IEC TR
20000-10:2015
ISO/IEC TR
20000-11:2015
Information technology — Security techniques — Refining software vulnerability analysis under
ISO/IEC 15408 and ISO/IEC 18045
Aircraft and space vehicles
F
ISO 44:1975
(reconfirmed)
ISO 10537:2010
ISO 13527:2010
ISO 13537:2010
ISO 13541:2010
ISO 15396:2007
(reconfirmed)
ISO 15856:2010
ISO/TS 16697:2012
ISO 19933:2007
(reconfirmed)
ISO 21348:2007
(reconfirmed)
ISO 22538-6:2010
TC 22
Road vehicles
ISO 7639:1985
(reconfirmed)
ISO 9141:1989
(reconfirmed)
ISO 9141-2:1994
(reconfirmed)
ISO 9141-3:1998
(reconfirmed)
ISO 10681-1:2010
ISO 10681-2:2010
ISO 11519-1:1994
(reconfirmed)
ISO 11519-3:1994
(reconfirmed)
ISO 11898-5:2007
(reconfirmed)
ISO 14230-3:1999
(reconfirmed)
ISO 14230-4:2000
(reconfirmed)
ISO 10599-1:1992
(reconfirmed)
ISO 4151:1987
(reconfirmed)
ISO 8705:2005
(reconfirmed)
ISO 9131:1993
(reconfirmed)
ISO 12366:2001
(reconfirmed)
ISO 14722:1998
(reconfirmed)
TC 23
Tractors and machinery for agriculture and forestry
ISO 789-4:1986
(reconfirmed)
ISO 5008:2002
(reconfirmed)
ISO 14269-1:1997
(reconfirmed)
ISO 14269-4:1997
(reconfirmed)
ISO 14269-5:1997
(reconfirmed)
ISO 22522:2007
(reconfirmed)
ISO 11784:1996
(reconfirmed)
ISO 15003:2006
(reconfirmed)
TC 34
Food products
ISO 7540:2006
(reconfirmed)
ISO 4121:2003
(reconfirmed)
ISO 11035:1994
(reconfirmed)
ISO 11817:1994
(reconfirmed)
TC 44
Welding and allied processes
ISO 7291:2010
TC 61
Plastics
ISO 3146:2000
(reconfirmed)
ISO 182-1:1990
(reconfirmed)
ISO 182-2:1990
(reconfirmed)
ISO 585:1990
(reconfirmed)
ISO 1061:1990
(reconfirmed)
ISO 1264:1980
(reconfirmed)
ISO 1265:2007
(reconfirmed)
ISO 1600:1990
(reconfirmed)
ISO 1628-3:2010
ISO 4575:2007
(reconfirmed)
ISO 27547-1:2010
TC 70
Internal combustion engines
ISO 7967-3:2010
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical
use
ISO 9187-1:2010
ISO 9187-2:2010
TC 79
Light metals and their alloys
ISO 25902-1:2009
ISO 25902-2:2010
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 20553:2006
(reconfirmed)
ISO 26062:2010
TC 92
Fire safety
ISO/TS 16733:2006
TC 96
Cranes
ISO 7752-4:1989
(reconfirmed)
ISO 8566-4:1998
(reconfirmed)
ISO 9374-1:1989
(reconfirmed)
ISO 9374-4:1989
(reconfirmed)
ISO 12210-1:1998
(reconfirmed)
ISO 12210-4:1998
(reconfirmed)
TC 102
Iron ore and direct reduced iron
ISO 3084:1998
(reconfirmed)
ISO 5416:2006
(reconfirmed)
TC 106
Dentistry
ISO 9333:2006
(reconfirmed)
ISO 6360-3:2005
(reconfirmed)
TC 107
Metallic and other inorganic coatings
ISO 4532:1991
(reconfirmed)
ISO 6370-1:1991
(reconfirmed)
ISO 8291:1986
(reconfirmed)
ISO 13805:1999
(reconfirmed)
ISO 13807:1999
(reconfirmed)
ISO 17834:2003
(reconfirmed)
ISO 28706-5:2010
TC 108
Mechanical vibration, shock and condition monitoring
ISO 13374-2:2007
(reconfirmed)
ISO 22096:2007
(reconfirmed)
ISO 8568:2007
(reconfirmed)
ISO 10813-1:2004
(reconfirmed)
TC 121
Anaesthetic and respiratory equipment
ISO 19054:2005
(reconfirmed)
TC 122
Packaging
IEC 61340-4-4:2005
TC 127
Earth-moving machinery
ISO 6393:2008
ISO 6394:2008
ISO 6395:2008
ISO 6396:2008
TC 130
Graphic technology
ISO 15930-7:2010
ISO 15930-8:2010
ISO 16612-2:2010
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 13956:2010
ISO 19899:2010
TC 146
Air quality
ISO 4225:1994
(reconfirmed)
ISO 7168-2:1999
(reconfirmed)
ISO 8756:1994
(reconfirmed)
ISO 9169:2006
(reconfirmed)
ISO 9359:1989
(reconfirmed)
ISO 20988:2007
(reconfirmed)
ISO 16000-5:2007
(reconfirmed)
TC 163
Thermal performance and energy use in the built environment
ISO 12344:2010
TC 172
Optics and photonics
ISO 20473:2007
(reconfirmed)
ISO 11380:1994
(reconfirmed)
ISO 11381:1994
(reconfirmed)
ISO 11979-5:2006
(reconfirmed)
ISO 21254-1:2011
ISO 21254-2:2011
ISO 21254-3:2011
TC 180
Solar energy
ISO 9459-5:2007
(reconfirmed)
TC 184
Automation systems and integration
ISO 10303-221:2007
(reconfirmed)
ISO/PAS 17506:2012
TC 195
Building construction machinery and equipment
ISO 15644:2002
(reconfirmed)
ISO 15689:2003
(reconfirmed)
TC 197
Hydrogen technologies
ISO 13984:1999
(reconfirmed)
ISO 13985:2006
(reconfirmed)
ISO 16110-2:2010
ISO 26142:2010
TC 207
Environmental management
ISO 14005:2010
TC 210
Quality management and corresponding general aspects for medical devices
ISO/TS 192182:2012
TC 211
Geographic information/Geomatics
ISO 19108:2002
(reconfirmed)
ISO 19128:2005
(reconfirmed)
ISO/TS 19129:2009
ISO/TS 191352:2012
TC 219
Floor coverings
ISO 24343-1:2007
(reconfirmed)
TC 256
Pigments, dyestuffs and extenders
ISO 591-1:2000
(reconfirmed)
ISO 787-3:2000
(reconfirmed)
ISO 787-8:2000
(reconfirmed)
ISO 1248:2006
(reconfirmed)
ISO 1249:1974
(reconfirmed)
ISO 2495:1995
(reconfirmed)
TC 299
Robots and robotic devices
ISO 14539:2000
(reconfirmed)
JTC 1
Information technology
ISO/IEC TS
29113:2012
ISO/IEC 14165114:2005
(reconfirmed)
ISO/IEC 14165222:2005
(reconfirmed)
ISO/IEC 14165241:2005
(reconfirmed)
ISO/IEC 14776151:2010
ISO/IEC 159389:2005
(reconfirmed)
ISO/IEC 1593810:2005
(reconfirmed)
ISO/IEC 210009:2005
(reconfirmed)
ISO/IEC 2300012:2010
ISO/IEC 291994:2010
ISO/IEC 15420:2009
Standards withdrawn
Period from 01 December to 31 December 2015
TC 17
Steel
ISO 3755:1991
(replaced by ISO 14737:2015)
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 14850-1:2004
(replaced by ISO 19017:2015)
TC 122
Packaging
IEC 61340-4-4:2005
(replaced by )
TC 160
Glass in building
ISO/TS 29584:2012
(replaced by ISO 29584:2015)
TC 172
Optics and photonics
ISO 11810-1:2005
(replaced by ISO 11810:2015)
ISO 11810-2:2007
(replaced by ISO 11810:2015)
TC 197
Hydrogen technologies
ISO/TS 20100:2008
(replaced by )
TC 211
Geographic information/Geomatics
ISO/TS 19103:2005
(replaced by ISO 19103:2015)
TC 215
Health informatics
ISO/TS 22224:2009
(replaced by )
JTC 1
Information technology
ISO/IEC ISP 111881:1995
(replaced by )
Meeting calendar
(update at 01 December 2015)
Meetings called for the month of November are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
January 2016
11-15
Padova (Italy)
TC 69/SC 4
Applications of statistical methods/Applications of statistical methods in product and process
management
11-15
Vienna (Austria)
TC 268
Sustainable development in communities
11-15
Vienna (Austria)
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
18-19
Martigny (Switzerland)
JTC 1/SC 37
Information technology/Biometrics
20-21
Singapore (Singapore)
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Offshore structures
22
Berlin (Germany)
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
25-27
London (United
Kingdom)
TC 8/SC 8
Ships and marine technology/Ship design
25-27
Weinheim (Germany)
TC 69/SC 7
Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma
25-29
London (United
Kingdom)
TC 107
Metallic and other inorganic coatings
25-29
London (United
Kingdom)
TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
25-29
London (United
Kingdom)
TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion coatings
26-28
Berlin (Germany)
TC 22/SC 31
Road vehicles/Data communication
27
Geneva (Switzerland)
COUNCIL
Council
28
Geneva (Switzerland)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
28
London (United
Kingdom)
TC 107/SC 4
Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
28
London (United
Kingdom)
TC 107/SC 7
Metallic and other inorganic coatings/Corrosion tests
28
West Conshohocken (Philadelphia) (USA)
TC 261
Additive manufacturing
February 2016
1-5
Vienna (Austria)
PC 273
Customer contact centres
8-12
Paris (France)
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
15-19
Rome (Italy)
JTC 1/SC 35
Information technology/User interfaces
16-18
Savannah (USA)
TC 23/SC 15
Tractors and machinery for agriculture and forestry/Machinery for forestry
24
Geneva (Switzerland)
President's
committee
President's committee
24-25
Kuala Lumpur
TC 22
Road vehicles
(Malaysia)
25-26
Geneva (Switzerland)
TMB
Technical Management Board
February-March 2016
29-4
Xian (China)
JTC 1/SC 6
Information technology/Telecommunications and information exchange between systems
29-3
Birmingham
(United Kingdom)
TC 257
Evaluation of energy savings
March 2016
2-3
Zurich (Switzerland)
TC 182
Geotechnics
2-3
Frankfurt (Germany)
TC 297
Waste management, recycling and road operation service
11-12
London (United
Kingdom)
TC 225
Market, opinion and social research
14-18
Paris (France)
TC 34/SC 18
Food products/Cocoa
14-18
Kanazawa (Japan)
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
14-18
Sydney (Australia)
TC 108/SC 2
Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures
14-18
Sydney (Australia)
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of
machine systems
15
Geneva (Switzerland)
President's
committee
President's committee
15
Basel (Switzerland)
TC 114/SC 3
Horology/Water-resistant watches
15-17
Shanghai (China)
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
16
Geneva (Switzerland)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
16
Geneva (Switzerland)
*
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
17
Milan (Italy)
TC 221
Geosynthetics
17-18
Geneva (Switzerland)
COUNCIL
Council
*
*
April 2016
4
New Delhi (India)
TC 85/SC 6
Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
4-5
Beijing (China)
TC 117
Fans
4-8
London (United
Kingdom)
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
4-8
New Delhi (India)
TC 85
Nuclear energy, nuclear technologies, and radiological protection
5-6
Courbevoie,
Paris (France)
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
6
Delft (Netherlands)
TC 219
Floor coverings
7
Delft (Netherlands)
TC 23/SC 19
Tractors and machinery for agriculture and forestry/Agricultural electronics
*
*
7
New Delhi (India)
TC 85/SC 2
Nuclear energy, nuclear technologies, and radiological protection/Radiological protection
11-14
Copenhagen
(Denmark)
TC 108
Mechanical vibration, shock and condition monitoring
11-14
Copenhagen
(Denmark)
TC 108/SC 3
Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock
measuring instruments
11-15
Sundsvall (Sweden)
PC 287
Chain of custody of wood and wood-based products
11-15
Sydney (Australia)
*
*
TC 178
Lifts, escalators and moving walks
12
Paris (France)
*
TC 23/SC 4
Tractors and machinery for agriculture and forestry/Tractors
12-13
(Europe)
*
*
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Pipeline transportation systems
13
Paris (France)
*
TC 23/SC 2
Tractors and machinery for agriculture and forestry/Common tests
14
Beauvais
(France)
TC 23
Tractors and machinery for agriculture and forestry
14
Linz (Austria)
TC 92/SC 3
Fire safety/Fire threat to people and environment
14
Copenhagen
(Denmark)
*
TC 108/SC 6
Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems
15
Vienna (Austria)
*
TC 270
Plastics and rubber machines
18
Helsinki (Finland)
TC 300
Solid recovered fuels
18-19
Tampa, Florida
(USA)
JTC 1/SC 27
Information technology/IT Security techniques
19-21
Singapore (Singapore)
PC 294
Guidance on unit pricing
22-23
ClausthalZellerfeld (Germany)
TC 24/SC 4
Particle characterization including sieving/Particle characterization
24-29
Concord, California (USA)
TC 204
Intelligent transport systems
25
Frankfurt (Germany)
TC 68/SC 4
Financial services/Securities and related financial instruments
25-29
Berlin (Germany)
*
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
26
Frankfurt (Germany)
*
TC 68/SC 7
Financial services/Core banking
28
Frankfurt (Germany)
*
TC 68
Financial services
28-29
Las Vegas (USA)
TC 118/SC 6
Compressors and pneumatic tools, machines and equipment/Air compressors and compressed
air systems
29
Kuala Lumpur
(Malaysia)
TC 238
Solid biofuels
*
May 2016
2-6
Amsterdam
(Netherlands)
*
TC 215
Health informatics
5-6
Milan (Italy)
*
TC 67/SC 4
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and production equipment
5-6
Laramie (USA)
TC 265
Carbon dioxide capture, transportation, and geological storage
6-13
Berlin (Germany)
*
*
TC 10
Technical product documentation
9-11
Paris (France)
*
TC 34/SC 9
Food products/Microbiology
9-13
Wellington (New
Zealand)
*
TC 46
Information and documentation
9-13
Wellington (New
Zealand)
*
TC 46/SC 11
Information and documentation/Archives/records management
9-13
(USA)
*
*
TC 276
Biotechnology
10
Virtual (Unknown)
*
TC 67/SC 9
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Liquefied natural gas installations and equipment
10-12
Barcelona
(Spain)
*
TC 147/SC 3
Water quality/Radioactivity measurements
11
(Portugal)
*
*
TC 87
Cork
11
Seoul (Korea,
Republic of)
*
*
TC 122
Packaging
16
Stuttgart (Germany)
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
16-20
Suzhou (China)
*
JTC 1/SC 40
Information technology/IT Service Management and IT Governance
16-20
Chicago (USA)
*
*
TC 121
Anaesthetic and respiratory equipment
19-20
Tokyo (Japan)
TC 184/SC 5
Automation systems and integration/Interoperability, integration, and architectures for enterprise
systems and automation applications
22-27
Sapporo (Japan)
*
TC 184/SC 4
Automation systems and integration/Industrial data
23-25
Rome (Italy)
*
TC 145
Graphical symbols
23-27
Suzhou (China)
*
JTC 1/SC 7
Information technology/Software and systems engineering
23-27
Tokyo (Japan)
*
TC 35
Paints and varnishes
23-27
Berlin (Germany)
TC 130
Graphic technology
23-28
Ljubljana (Slovenia)
TC 37/SC 4
Terminology and other language and content resources/Language resource management
24
Madrid (Spain)
TC 5/SC 5
Ferrous metal pipes and metallic fittings/Threaded fittings, solder fittings, welding fittings, pipe
threads, thread gauges
25
Brussels (Belgium)
*
*
TC 115
Pumps
26
New York (USA)
*
TC 67/SC 5
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Casing, tubing and drill pipe
26-27
Kuala Lumpur
(Malaysia)
*
TC 228
Tourism and related services
27
Frankfurt (Germany)
TC 68/SC 2
Financial services/Financial Services, security
*
(Japan)
*
*
TC 22/SC 39
Road vehicles/Ergonomics
Atlanta (USA)
*
*
TC 86
Refrigeration and air-conditioning
(USA)
*
*
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
Mexico City
(Mexico)
*
*
TC 289
Brand evaluation
*
TC 34/SC 5
Food products/Milk and milk products
May-June 2016
30-3
Copenhagen
(Denmark)
31-2
Lulea (Sweden)
TC 102/SC 1
Iron ore and direct reduced iron/Sampling
31-2
Lulea (Sweden)
TC 102/SC 2
Iron ore and direct reduced iron/Chemical analysis
31-2
Lulea (Sweden)
TC 102/SC 3
Iron ore and direct reduced iron/Physical testing
June 2016
4
Geneva (Switzerland)
*
JTC 1/SC 29
Information technology/Coding of audio, picture, multimedia and hypermedia information
6-7
Geneva (Switzerland)
*
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
6-8
Paris (France)
*
TC 220
Cryogenic vessels
7-8
Winterthur (Switzerland)
TC 5/SC 11
Ferrous metal pipes and metallic fittings/Metal hoses and expansion joints
7-10
Prague (Czech
Republic)
*
TC 156
Corrosion of metals and alloys
9-16
Portland, Maine
(USA)
*
JTC 1/SC 28
Information technology/Office equipment
13
Geneva (Switzerland)
*
President's
committee
President's committee
14
Virtual (Unknown)
*
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
14-17
Ekaterinburg
(Russian Federation)
*
*
REMCO
Committee on reference materials
15-16
Geneva (Switzerland)
*
TMB
Technical Management Board
18-20
Munich (Germany)
TC 135
Non-destructive testing
18-20
Munich (Germany)
*
TC 135/SC 3
Non-destructive testing/Ultrasonic testing
18-20
Munich (Germany)
*
TC 135/SC 4
Non-destructive testing/Eddy current methods
18-20
Munich (Germany)
*
TC 135/SC 5
Non-destructive testing/Radiation methods
18-20
Munich (Germany)
*
TC 135/SC 6
Non-destructive testing/Leak detection methods
18-20
Munich (Germany)
*
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
20-21
Berlin (Germany)
*
TC 22/SC 32
Road vehicles/Electrical and electronic components and general system aspects
20-24
Frankfurt (Germany)
*
*
JTC 1/SC 39
Information technology/Sustainability for and by Information Technology
20-24
Teddington
(United Kingdom)
*
TC 43/SC 3
Acoustics/Underwater acoustics
21-22
Düsseldorf
TC 17/SC 10
Steel/Steel for pressure purposes
(Germany)
22-23
Porto (Portugal)
22-23
Porto (Portugal)
23
Schonach (Germany)
24
30
*
TC 17/SC 17
Steel/Steel wire rod and wire products
TC 269
Railway applications
*
*
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
Porto (Portugal)
*
TC 17/SC 15
Steel/Railway rails, rails fasteners, wheels and wheelsets
Geneva (Switzerland)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
(Germany)
*
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(Europe)
*
*
TC 22/SC 38
Road vehicles/Motorcycles and mopeds
(Canada)
*
*
TC 159/SC 1
Ergonomics/General ergonomics principles
St. Petersburg
(Russian Federation)
*
*
TC 172/SC 4
Optics and photonics/Telescopic systems
Stockholm (Sweden)
*
*
TC 242
Energy Management
Turin (Italy)
*
*
TC 274
Light and lighting
June-July 2016
25-1
(Denmark)
*
*
TC 37
Terminology and other language and content resources
27-1
London (United
Kingdom)
*
TC 188
Small craft
27-1
(Unknown)
*
*
TC 224
Service activities relating to drinking water supply systems and wastewater systems - Quality
criteria of the service and performance indicators
27-1
Hangzhou (China)
*
*
TC 268
Sustainable development in communities
27-1
Hangzhou (China)
*
*
TC 268/SC 1
Sustainable development in communities/Smart community infrastructures
*
*
TC 34/SC 4
Food products/Cereals and pulses
New Delhi (India)
*
*
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
4-8
Paris (France)
*
*
TC 34
Food products
15
Greenville (USA)
*
*
TC 94/SC 14
Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
*
*
TC 206
Fine ceramics
2nd Quarter 2016
(Germany)
1st Semester 2016
July 2016
August 2016
19
Berlin (Germany)
22-26
Beijing (China)
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
25
Virtual (Unknown)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
(USA)
*
*
TC 91
Surface active agents
September 2016
5-9
Bilbao (Spain)
*
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration
and shock
5-10
Changsha (China)
*
TC 96/SC 6
Cranes/Mobile cranes
5-10
Sydney (Australia)
*
TC 147
Water quality
10-16
San José, California (USA)
*
TC 130
Graphic technology
17-21
Shanghai (China)
*
TC 2/SC 7
Fasteners/Reference standards
17-21
Shanghai (China)
*
TC 2/SC 11
Fasteners/Fasteners with metric external thread
17-21
Shanghai (China)
*
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
18
Beijing (China)
*
President's
committee
President's committee
19
Beijing (China)
*
COUNCIL
Council
19-22
Atlanta (USA)
*
TC 142
Cleaning equipment for air and other gases
19-23
Berlin (Germany)
*
*
TC 61
Plastics
19-25
Melbourne (Australia)
*
TC 165
Timber structures
20
Beijing (China)
*
DEVCO
Committee on developing country matters
20
Beijing (China)
*
TMB
Technical Management Board
20-22
Yichang (China)
*
*
TC 256
Pigments, dyestuffs and extenders
20-22
Stockholm (Sweden)
*
*
TC 264
Fireworks
21-23
Beijing (China)
*
GA
General Assembly
21-23
Beijing (China)
*
*
TC 17/SC 1
Steel/Methods of determination of chemical composition
22
Beijing (China)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
23
Barcelona
(Spain)
*
TC 254
Safety of amusement rides and amusement devices
26-30
San José, California (USA)
*
JTC 1/SC 2
Information technology/Coded character sets
26-30
Seoul (Korea,
Republic of)
*
*
JTC 1/SC 34
Information technology/Document description and processing languages
26-30
Burlington, Vermont (USA)
*
*
TC 146/SC 3
Air quality/Ambient atmospheres
26-30
Burlington, Vermont (USA)
*
*
TC 146/SC 6
Air quality/Indoor air
26-30
Berlin (Germany)
*
*
TC 163
Thermal performance and energy use in the built environment
26-30
Berlin (Germany)
*
*
TC 205
Building environment design
26-30
(Canada)
*
*
TC 218
Timber
28
Delft (Netherlands)
*
TC 28/SC 5
Petroleum products and related products of synthetic or biological origin/Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels
28-29
Delft (Netherlands)
*
TC 28/SC 2
Petroleum products and related products of synthetic or biological origin/Measurement of petroleum and related products
29
Delft (Netherlands)
*
TC 28/SC 4
Petroleum products and related products of synthetic or biological origin/Classifications and
specifications
29
Delft (Netherlands)
*
TC 28/SC 7
Petroleum products and related products of synthetic or biological origin/Liquid Biofuels
29-30
(France)
*
*
TC 17
Steel
30
Delft (Netherlands)
*
TC 28
Petroleum products and related products of synthetic or biological origin
30
Milan (Italy)
*
TC 34/SC 9
Food products/Microbiology
30
Burlington, Vermont (USA)
*
*
TC 146/SC 1
Air quality/Stationary source emissions
Vienna (Austria)
*
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
(Asia)
*
*
TC 31/SC 9
Tyres, rims and valves/Valves for tube and tubeless tyres
Cartagena de
*
Indias (Colombia) *
TC 71
Concrete, reinforced concrete and pre-stressed concrete
Burlington, Vermont (USA)
*
*
TC 146/SC 2
Air quality/Workplace atmospheres
Sao Paulo (Brazil)
*
*
TC 173
Assistive products for persons with disability
Sao Paulo (Brazil)
*
*
TC 209
Cleanrooms and associated controlled environments
Shanghai (China)
*
*
TC 213
Dimensional and geometrical product specifications and verification
Singapore (Singapore)
*
*
TC 260
Human resource management
*
*
TC 92/SC 1
Fire safety/Fire initiation and growth
3rd Quarter 2016
Seoul (Korea,
Republic of)
October 2016
2-7
Auckland (New
Zealand)
*
TC 204
Intelligent transport systems
4-7
London (United
Kingdom)
*
TC 22/SC 34
Road vehicles/Propulsion, powertrain and powertrain fluids
5-6
Paris (France)
*
*
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
5-7
Madrid (Spain)
*
TC 225
Market, opinion and social research
6
Virtual (Unknown)
*
President's
committee
President's committee
6
(Unknown)
*
*
TC 67/SC 9
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Liquefied natural gas installations and equipment
6-7
Berlin (Germany)
*
*
TC 119
Powder metallurgy
10-14
Hoffman Estates,
Illinois (USA)
*
TC 58/SC 2
Gas cylinders/Cylinder fittings
10-14
Tokyo (Japan)
*
*
TC 153
Valves
12-13
Hangzhou (China)
*
TC 70/SC 8
Internal combustion engines/Exhaust gas emission measurement
14
Hangzhou (China)
*
TC 70
Internal combustion engines
17-21
Berlin (Germany)
*
*
JTC 1/SC 38
Information technology/Cloud Computing and Distributed Platforms
17-21
(China)
*
*
TC 5/SC 2
Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings and their joints
17-21
(China)
*
*
TC 5/SC 10
Ferrous metal pipes and metallic fittings/Metallic flanges and their joints
17-21
Moscow (Russian Federation)
*
TC 20
Aircraft and space vehicles
17-21
London (United
Kingdom)
*
TC 58/SC 3
Gas cylinders/Cylinder design
17-21
Kyoto (Japan)
*
TC 138
Plastics pipes, fittings and valves for the transport of fluids
19-21
Philadelphia
(USA)
*
*
TC 202
Microbeam analysis
20-21
Tokyo (Japan)
*
*
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
20-21
London (United
Kingdom)
*
TC 58
Gas cylinders
20-21
Vienna (Austria)
*
TC 227
Springs
21
(China)
*
*
TC 5
Ferrous metal pipes and metallic fittings
22-23
Orlando (USA)
*
*
TC 24/SC 4
Particle characterization including sieving/Particle characterization
24-26
Tokyo (Japan)
*
*
TC 79/SC 11
Light metals and their alloys/Titanium
24-28
Tokyo (Japan)
*
*
TC 79
Light metals and their alloys
24-28
Sydney (Australia)
*
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
26-27
Osaka (Japan)
*
TC 126
Tobacco and tobacco products
26-28
(United Kingdom)
*
*
TC 123
Plain bearings
27-28
Orlando (USA)
*
*
TC 17/SC 12
Steel/Continuous mill flat rolled products
Berlin (Germany)
*
*
TC 59
Buildings and civil engineering works
Berlin (Germany)
*
*
TC 59/SC 17
Buildings and civil engineering works/Sustainability in buildings and civil engineering works
London (United
Kingdom)
*
*
TC 70/SC 7
Internal combustion engines/Tests for lubricating oil filters
Tokyo (Japan)
*
*
TC 164
Mechanical testing of metals
(Korea, Republic
of)
*
*
TC 201
Surface chemical analysis
Tel Aviv (Israel)
*
*
TC 282
Water re-use
Tel Aviv (Israel)
*
*
TC 282/SC 3
Water re-use/Risk and performance evaluation of water re-use systems
October-November 2016
30-4
Langkawi (Malaysia)
*
*
TC 45
Rubber and rubber products
31-4
Seoul (Korea,
Republic of)
*
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
November 2016
1-4
Troy (USA)
*
*
TC 22/SC 36
Road vehicles/Safety and impact testing
7-8
Seoul (Korea,
Republic of)
*
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
7-11
Sydney (Australia)
*
TC 98
Bases for design of structures
7-12
Lillehammer
(Norway)
*
*
JTC 1
Information technology
8-10
Kobe (Japan)
*
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
17-18
Orlando (USA)
*
TC 299
Robots and robotic devices
Christchurch
(New Zealand)
*
*
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
(China)
*
*
TC 134
Fertilizers and soil conditioners
(Unknown)
*
*
TC 215
Health informatics
*
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
*
*
TC 113
Hydrometry
(Europe)
*
*
TC 31/SC 5
Tyres, rims and valves/Agricultural tyres and rims
(Europe)
*
*
TC 31/SC 6
Tyres, rims and valves/Off-the-road tyres and rims
(Europe)
*
*
TC 31/SC 7
Tyres, rims and valves/Industrial tyres and rims
December 2016
9
Berlin (Germany)
4th Quarter 2016
(India)
2nd Semester 2016
Florence (Italy)
*
*
TC 160
Glass in building
Florence (Italy)
*
*
TC 160/SC 1
Glass in building/Product considerations
Florence (Italy)
*
*
TC 160/SC 2
Glass in building/Use considerations
(Korea, Republic
of)
*
*
JTC 1/SC 23
Information technology/Digitally Recorded Media for Information Interchange and Storage
(South Africa)
*
*
TC 44
Welding and allied processes
(Sweden)
*
*
TC 102
Iron ore and direct reduced iron
(Japan)
*
*
TC 183
Copper, lead, zinc and nickel ores and concentrates
Month unknown 2016
March 2017
6
Kyoto (Japan)
*
*
TC 60
Gears
16-17
Geneva (Switzerland)
*
*
COUNCIL
Council
Guilin (China)
*
*
TC 29/SC 8
Small tools/Tools for pressing and moulding
(Unknown)
*
*
TC 34/SC 15
Food products/Coffee
(China)
*
*
TC 215
Health informatics
Washington, D.C
(USA)
*
TC 4
Rolling bearings
(Sweden)
*
*
TC 29
Small tools
(Unknown)
*
*
TC 226
Materials for the production of primary aluminium
(Australia)
*
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(USA)
*
*
TC 42
Photography
(North America)
*
*
TC 31
Tyres, rims and valves
(North America)
*
*
TC 31/SC 3
Tyres, rims and valves/Passenger car tyres and rims
(North America)
*
*
TC 31/SC 10
Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims
Tsukuba (Japan)
*
TC 92
Fire safety
April 2017
10
May 2017
15-19
June 2017
2nd Quarter 2017
*
July 2017
(Unknown)
*
*
JTC 1/SC 34
Information technology/Document description and processing languages
Raleigh (USA)
*
TC 38/SC 23
Textiles/Fibres and yarns
Raleigh (USA)
*
*
TC 38
Textiles
August 2017
31
September 2017
18
Berlin (Germany)
*
COUNCIL
Council
20-22
Berlin (Germany)
*
*
GA
General Assembly
25-29
(Unknown)
*
*
TC 58/SC 2
Gas cylinders/Cylinder fittings
(China)
*
*
JTC 1/SC 2
Information technology/Coded character sets
London (United
Kingdom)
*
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
(Japan)
*
*
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
Vienna (Austria)
*
*
TC 165
Timber structures
New Delhi (India)
*
*
TC 178
Lifts, escalators and moving walks
(Japan)
*
*
TC 213
Dimensional and geometrical product specifications and verification
(Nigeria)
*
*
TC 260
Human resource management
*
*
TC 289
Brand evaluation
3rd Quarter 2017
Vienna (Austria)
October 2017
2-7
Vladivostok
(Russian Federation)
*
JTC 1
Information technology
22-27
Hawaii (USA)
*
TC 45
Rubber and rubber products
(Korea, Republic
of)
*
*
TC 215
Health informatics
*
*
TC 54
Essential oils
(North America)
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
Erlangen (Germany)
*
*
TC 36
Cinematography
November 2017
(India)
Month unknown 2017
(South Africa)
*
*
TC 46
Information and documentation
(South Africa)
*
*
TC 46/SC 11
Information and documentation/Archives/records management
(United Kingdom)
*
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Seoul (Korea,
Republic of)
*
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
(USA)
*
*
TC 198
Sterilization of health care products
Milan (Italy)
*
*
TC 206
Fine ceramics
*
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
*
*
TC 61
Plastics
*
*
TC 92
Fire safety
*
*
TC 215
Health informatics
(Europe)
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
(China)
*
*
TC 45
Rubber and rubber products
(USA)
*
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
Milan (Italy)
*
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
*
*
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data representation
June 2018
(Korea, Republic
of)
September 2018
(Japan)
3rd Quarter 2018
(Netherlands)
October 2018
(Malaysia)
Month unknown 2018
Month unknown 2019
(Asia)
Month unknown 2020
(North America)