1999 Univers ität Stuttgart
Office of International Affairs and
Faculty of Energy Tech./
Design & Manuf. Engineering.
Office of International Affairs General Information
Who is considered to be a visiting student?
This brochure is designed for all international students who come to study at the Universität Stuttgart on the basis of an
exchange agreement with partner institutions
or a programme such as SOCRATES/ ERASMUS
and who do not plan to complete a degree at the Universität Stuttgart.
Descrip tion of the Universität Stuttgart
The Faculties/ Departments of the Universität Stuttgart and their Web Sites
The Academic Calendar
Application Information
Academic Prerequisites
Application Documents and Deadlines
Letter of Admission
– Zulassungsbescheid
Registration
The German Intensive Course
The Orientation Seminar
The Structure of Studies
Which courses must I take?
What kind of courses are offered?
Transferring Credits
Libraries
Computer Centre and E-mail
Sports Activities
Meals
5
5
12
12
12
12
8
9
9
9
7
7
7
8
10
10
10
11
Information Package 2
Office of International Affairs
Residence Permits and Visa Regulations
Costs of Living Expenses
Dormitory Accommodation
Temporary Accommodation for Young People
Health Insurance
Medical Care
Public Transport
Banking
Telephoning
The City of Stuttgart
Climate
How to get to Stuttgart-Vaihingen
How to get to the dormitories in Ludwigsburg
How to get to the Office of International Affairs
What you need to think about before arriving in Stuttgart
General Information
17
17
18
18
19
19
20
15
16
16
17
13
13
14
14
Information Package 3
Office of International Affairs General Information
3.1
3.2
Mechanical Railway Technology
Biomedical Engineering
3.3 Applied Dynamics
3.4 Electronics Manufacturing
3.5
3.6
Technologies for Energy Saving
Energy Systems
3.7 Energy Systems for Technical Building Equipment
3.8 Energy Technologies and Systems
3.9 Industrial Management
3.10 Precision Mechanics and Microtechniques
53
57
3.11 Precision Engineering 60
3.12 Manufacturing Technology of Ceramic Components, Composites and Surfaces 62
41
43
46
48
32
34
38
39
3.13 Mechanical Handling
3.14 Applied Computer Science
3.15 Design Technology
3.16 Vehicle Engineering
64
68
71
74
3.17 Power Plant and Firing Technology
3.18 Polymer Science
3.19 Polymer Technology
3.20 Agricultural Engineering
3.21 Laser Material Processing
3.22 Materials Testing, Materials Science and Strength of Materials
3.23 Engineering Mechanics
3.24 Technical Optics
91
92
95
98
78
82
86
89
3.25 Data Processing and Digital Control Technology
3.26 Control Engineering
3.27 Control Technology
3.28 Traffic Engineering
3.29 Thermal Turbomachinery
3.30 Fluid Mechanics and Hydraulic Machinery
3.31 Technology Management
3.32 Textile Technology
3.33 Applied Thermodynamics
3.34 Metal Forming Technologies
3.35 Environmental Protection Engineering and Safety Technology
3.36 Combustion and Internal Combustion Engines
3.37 Chemical Process Technology
3.38 Mechanical Process Engineering
3.39 Thermal Engineering and Refrigeration
3.40 Machine Tools
122
125
127
132
136
138
140
142
99
102
105
108
110
113
115
120
Information Package 4
Office of International Affairs General Information
Description of the Universität Stuttgart
The Universität Stuttgart, which was founded in 1829, has integrated the social sciences and the humanities with engineering and the natural sciences to become an internationally renown future-oriented place of teaching and research. Today nearly 17,000 students are studying to complete their degrees in one of the 44 degree courses offered by the 14 faculties. More than 2,900 of these young men and women are international students.
The Universität Stuttgart holds a leading position in both basic and applied research and is proud of its tradition of close cooperation with industry as well as with other research institutions such as the Fraunhofer-Society for Production Engineering, the Baden-
Württemberg Materials Testing Centre and the German Aerospace Research Institute.
These close relationships also stimulate important impulses for teaching at the university.
Address:
Universität Stuttgart
Keplerstr. 7
70174 Stuttgart
Germany
Phone ++49-711-121-0
Fax ++49-711-121-2271
Faculties/ Departments of the Universität Stuttgart and their Web Sites
Most of the Universität Stuttgart is located either in the centre of the city or in a suburb of
Stuttgart called Vaihingen. The city centre campus is connected to the campus in Vaihingen by a fast underground train system. The journey takes about ten minutes each way.
The following faculties are located In the centre of the city :
Architecture and Urban Planning
Biological and Geo-Sciences (Geography, Geology)
History, Social Sciences and Business Administration
Philosophy
Civil Engineering and Surveying (partly)
Energy Technology, Construction and Production Engineering (partly)
The following are in Vaihingen :
Information Package 5
Office of International Affairs General Information
Biological and Geo-Sciences (Biology)
Civil Engineering and Surveying (partly)
Chemistry
Electrical Engineering
Energy Technology, Construction and Production Engineering (partly)
Aerospace and Aviation Engineering
Mathematics
Physics
The following are located in a different part of Stuttgart :
Process Engineering (Böblinger Straße)
Computer Science (industrial area in Stuttgart-
Möhringen)
A survey of the subjects and courses offered as well as a description of the faculties of the
Universität Stuttgart can be found on the web as follows: http://www.uni-stuttgart.de/ia/ http://www.uni-stuttgart.de/organisation/faculties/
The Office of International Affairs is responsible for international relations and coordinates the programmes that the Universität Stuttgart has with partner institutions throughout the world. In addition, it serves as a centre for advising international students on general questions and problems affecting study and life in Stuttgart as well as being the first place for students to go who wish to study abroad.
Should you have any questions related to your specific study programme and require academic counselling, please consult your academic advisor. His or her address is available at the Office of International Affairs.
The Office of International Affairs also organises an Orientation Seminar (see page 9) as well as short excursions to places of interest in the area around Stuttgart. Once a month, the Office of International Affairs organises an International „Stammtisch“ where visiting students and any German students who may be interested can meet.
The contact person for visiting students is:
Ms. Gertrud Burger
Office of International Affairs
Geschwister-Scholl-Str. 24
70174 Stuttgart, Germany
Phone ++49 711-121-2276
Information Package 6
Office of International Affairs General Information
Fax ++49 711-121-4104 e-mail: incoming.visiting@ia.uni-stuttgart.de
The Academic Calendar
The academic year is divided into two semesters: the Winter Semester (WS ) from October to March and the Summer Semester (SS) from April to September. Each semester covers a period of approximately 15 weeks during which classes take place called the
Vorlesungszeit and a period when there are usually no classes called the vorlesungsfreie Zeit .
In the WS, the Vorlesungszeit is from the of middle of October to the middle of February and in the SS from the middle of April to the middle of July.
Please note that examinations and block courses very often take place during the vorlesungsfreie Zeit . During the month of August no exams are taken at all.
Application Information (academic prerequisites, deadlines, registration, etc.)
Before you can study at the Universität Stuttgart you have to take the following steps:
submit an application to study at the
Universität Stuttgart at least three months prior to the date you wish to begin your studies (see below for deadlines)
register at the Universi tät Stuttgart on arrival in Stuttgart
Academic Prerequisites
Proficiency in German:
Virtually all courses at the Universität Stuttgart are held in German. For this reason, you will be expected to have had at least 800 hours of course work in German.
We expect that visiting students whose German proficiency corresponds to less than 800 hours of German participate in our German Intensive Course (see page 9).
If you would like to receive a certificate about your German proficiency you may take a
German examination. This examination is called the DSH
(Deutschsprachprüfung zur
Hochschulzulassung). It can be taken at the Universität Stuttgart at around the end of
September or March.
Academic Performance:
In order to participate in our exchange programmes visiting students must have grades of
C or above.
Information Package 7
Office of International Affairs General Information
Application Documents and Deadlines
An application form Antrag auf Zulassung zum Studium
The form is either available
- at The Office of International Affairs of your home university or
- from your SOCRATES Student Advisor.
- You can also obtain a copy by contacting the Office of International Affairs at the
Universität Stuttgart (email: incoming@ia.uni-stuttgart.de) or
- you can also download the form as pdf file, see: http://www.uni-stuttgart.de/ia/
You must attach the following documents (certified copies, if possible):
A Transcript of Courses from your current university
Proof of your German proficiency (see above and page 9)
1 Passport photo
SOCRATES students: a confirmation from your home university that you are a
SOCRATES student.
Deadlines:
15 July
Submission of the original application papers with the necessary documents if you wish to begin your studies in Stuttgart in the Winter Semester.
15 January
Submission of the original application papers with the necessary documents if you wish to begin your studies in Stuttgart in the Summer Semester.
SOCRATES-Students must submit their application to the SOCRATES Student Advisors at the individual institutes.
All other visiting students submit their complete application to Ms. Gertrud Burger at the
Office of International Affairs.
Letter of Admission - Zulassungsbescheid
If you are accepted by the Universität Stuttgart you will receive the following documents during the first two weeks in August (applications for WS) or the first two weeks in March
(applications for SS):
A Letter of Admission as well as a transfer form for the payment of the Student Services fee ( Studentenwerksbeitrag ) which amounts to DM 60 (at the time of print). This fee has to be paid by all students and is charged each semester. It is a general fee towards the cost of running the cafeterias and dormitories and offers a number of other consulting services for students free of charge. Do not pay the 'Studentenwerksbeitrag' until you have arrived in Stuttgart.
Information Package 8
Office of International Affairs General Information
Registration
You must register in person once you arrive in Stuttgart. The necessary steps for registration are explained in the Welcome-Guide which you can get on arrival from the Office of
International Affairs. Please do not forget to bring your Letter of Admission ( Zulassungsbescheid ). It is required for registration.
The German Intensive Course
This German intensive course is designed specifically for the needs of visiting students within partnership programmes and is taught by the staff of the Intercultural Centre of the
Universität Stuttgart. The course starts at the beginning of September (Winter Semester) or March (Summer Semester) and runs for about five weeks. Participants, however, are expected to have some proficiency in German corresponding to 200 hours or two semesters of coursework in German at a university.
The course takes place from Monday to Friday from 8.30 a.m. to 1 p.m. and twice a week there are also classes from 2 p.m. to 4 p.m.
The objectives of this intensive course are:
to achieve proficiency in German at an advanced level corresponding to about 800 hours of German,
to improve listening comprehension and active use of German as a scientific language, particularly in respect to the specific subject of the participant,
to acquire the learning techniques and communicative competence needed to study successfully at a German university.
Application deadline:
15 July for the Winter Semester and 15 January for Summer Semester. Application forms are available from Ms. Gertrud Burger at the Office for International Affairs, e-mail: incoming.visiting@ia.uni-stuttgart.de.
The Orientation Seminar
The Orientation Seminar immediately follows the German Intensive Course and it takes place the week previous to the beginning of the lecture period.
The three-day seminar offers intercultural and regional information as well as a general introduction to studying at the Universität Stuttgart and also includes specialised academic counselling. The seminar concludes with a one-day excursion. All participants have to make a contribution towards the cost. At present this is DM 20.
Registration deadline: 15 September for the Winter Semester and 15 March for the
Summer Semester. Registration forms are available from Ms. Gertrud Burger, e-mail: incoming.visiting@ia.uni-stuttgart.de.
Information Package 9
Office of International Affairs General Information
The Structure of Studies
A degree course is divided into the Stage 1 Studies („Grundstudium“) and the Stage 2
Studies („Hauptstudium“)
. Visiting students within partnership programs may take courses in either stage.
The Stage 1 Studies last at least 4 semesters and give a general introduction into the chosen field of study. The Stage 1 Studies are completed with a pre-diploma examination
(„Vordiplom“) in the engineering sciences or with an intermediate examination („Zwischenprüfung“) in the social sciences and humanities respectively before the Stage 2 Studies. In contrast to the Anglo-American system the successfully completed Stage 1 Studies do not constitute an academic degree or professional qualification.
During the Stage 2 Studies students continue their studies and extend their knowledge in a more specialised way. At the end of the Stage 2 Studies students have to write a project work (Diplomarbeit) in the engineering sciences or a final thesis (Magisterarbeit) in the humanities. After having successfully passed the final examination students obtain their degree (a Diplom degree in the engineering sciences, a Magister Artium degree in the humanities) which enables them to start their professional career.
Which courses must I take?
In comparison to the Anglo-American university system, students at German universities generally have more freedom in the selection of the courses they choose to take and when they take them. However, this does vary from subject to subject. Many of the courses in the natural sciences and engineering are obligatory whereas students studying in the humanities and social sciences generally choose the courses they want to take on a more individual basis.
One further difference is the time for selecting courses. This does not normally take place at the end of the previous semester but during the first two weeks of the semester itself.
This, and the freedom of choice is often confusing for international students. For this reason, the individual faculties offer comprehensive information seminars at the beginning of each semester to help students in their choice. Additional information is given during the
Orientation Seminar (see page 9) and can be found in the Welcome Guide . Should you still have difficulties do not hesitate to contact the Office of International Affairs.
What kind of courses are offered?
The Universität Stuttgart distinguishes between the following types of courses:
Lecture held by an instructor in front of a large group of students
Exercises the subject matter is reviewed again and deepened in smaller groups; often exercises accompany lectures
Information Package 10
Office of International Affairs General Information
Seminars student active participation is very important; students present papers on a given topic followed by discussion
Practical courses common in the natural sciences and engineering and usually involving experiments in a laboratory
As a rule, a class involves two credit hours. One credit hour, Semesterwochenstunde
(SWS), corresponds to 45 minutes in the classroom over the whole semester. Generally all courses are taught in German.
Transferring Credits
There are two possibilities for visiting students to receive credit for work done in Stuttgart:
Visiting students can participate in regular courses and take the final written or oral exam in each course in order to be awarded a proof of academic achievement or
Schein . In addition to receiving a Schein for successfully completing a written exam or
Klausur, it can be awarded for a project paper or Hausarbeit (an essay on a specific topic of between 10 and 20 pages in length) or for an assignment and oral presentation or Referat (a paper presented on a given topic usually as part of a seminar).
Grades range from 1 (very good) to 4 (sufficient). If a student receives a grade below
4, then the course has been failed and needs to be repeated. In some courses grades are not given.
Students under the SOCRATES exchange-scheme will receive their credits according to the ECTS -agreement (European Credit Transfer System), which is to be discussed between the student and the home and host supervisors.
Some advanced visiting students may wish to work on an independent project supervised by a professor. Such independent study corresponds closely to a Studienarbeit, which is required in engineering and many of the natural sciences. Students wishing to do this type of independent study need to find a professor at the Universität Stuttgart who is willing to supervise such a project work. The question of credit transfer to the home universities should also be clarified in advance. The subject advisors or
Fachstudienberater/in can assist in finding a supervisor. Their addresses can be found in WWW under http://www.uni-stuttgart.de/studium/beratung/fachberatung. html or from The Office of International Affairs (address see page 6).
Please clarify the question of credit transfer with your home universities prior to coming to Stuttgart and make sure that you maintain contact with your home supervisor during your stay here. This is possible via e-mail.
Information Package 11
Office of International Affairs General Information
Libraries
There are two university libraries, one on the City Centre Campus and one on the
Vaihingen Campus. Students need a library ticket in order to be able to borrow books from the library. This can be obtained at one of the university libraries. Please note that many of the faculties and institutes have their own libraries, too.
Computer Centre and E-mail
The computer centr e of the Universität Stuttgart (RUS) provides a number of terminals for student use. Demand is extremely high so students must be prepared to wait. Should you wish to open an e-mail account, you can do so at the Computer Advising Centre RUS-
Benutzerberatung on presentation of your registration number (handed to you at registration).
Sports Activities
The Institute of Sports Science offers a whole range of sporting activities each semester.
They are generally free and are frequently organised by students. These can be such regular events as volleyball, hockey and climbing or special excursions such as skiing in winter or sailing in summer. A comprehensive programme is provided at the beginning of each semester and a copy can be obtained at The Office of International Affairs.
Meals
Students must provide for their own meals. This can be done inexpensively by eating in the Student Union cafeteria or Mensa . In addition to the Mensa on the City Centre Campus and in Vaihingen, there are a number of student cafeterias. The Mensa is open for lunch five days a week. There is always a choice of meal which costs between DM 3 and
DM 5. The cafeterias are normally open weekdays between 9 a.m. and 5 p.m. and offer drinks and small snacks.
Information Package 12
Office of International Affairs General Information
Residence Permits and Visa Regulations
SOCRATES-Students from EU-countries and visiting students who are citizens of the USA:
Visiting students who are either EU-citizens or citizens of the USA can enter Germany with their passports and apply for their residence permit Aufenthaltsbewilligung at the foreign registration office of the City of Stuttgart Ausländerbehörde after arrival. Since Germany has registration laws, all persons must register at the general registration office
Meldebe hörde of the city where they are living within seven days of arrival.
The following documents must be presented to the Ausländerbehörde and the
Melde behörde and should therefore be brought with you from home:
- passport
-
- proof of sufficient financial resources (at present approx. DM 900 per month). This can be a savings book, confirmation from the bank on the credit balance available, a bank statement, proof of stipend or scholarship, a statement from parents with either a notarised signature of the parents or a copy of their passports two passport photos
Visiting students who are citizens of Australia, Canada and non EU-countries:
These visiting students must apply for a prospective student visa (Studienbewerbervisum or Studentenvisum) at the German Embassy or a German Consulate in their home country prior to departure. This should be done as early as possible because the processing time for such visas can take very long i.e. up to nine months.
The following documents are required from the foreign registration office
Ausländerbe hörde
and from the general registration office
Meldebehörde
and should be brought with you from home:
- prospective student visa (Studienbewerbervisum or Studentenvisum)
- proof of sufficient financial resources (at present approx. DM 900 per month). This can
- be a savings book, confirmation from the bank on the credit balance available, a bank statement, proof of stipend or scholarship, a statement from parents with either a notarised signature of the parents or a copy of their passports two passport photos
Costs of Living Expenses
In general, students will need about DM 1000/ month. This will cover the following: rent approx. health insurance approx. monthly ticket for public transport approx.
DM 300 to 450 (without meals)
DM 95
DM 70
Information Package 13
Office of International Affairs General Information food other incidentals
Dormitory Accommodation approx. approx.
DM 400
DM 100
The Office of International Affairs can provide a room in one of the dormitories for all of the visiting students who are admitted to the Universität Stuttgart. SOCRATES students apply for a room by sending the form Application for Student Housing to their relevant
SOCRATES Student Advisor not later than 3 months prior to coming to Stuttgart. All other visiting students send this form to Ms. Gertrud Burger at the Office of International Affairs.
Most of the dormitories are located on the Campus in Stuttgart-Vaihingen and on the campus of the Pädagogische Hochschule (teachers training college) in Ludwigsburg and they are mixed. All dormitories can be easily reached within 20 min. from the city campus by S-Bahn (commuter train). The rooms are equipped with table, chair, bed, wardrobe/ closet, bookshelf and a washbasin. There is a common kitchen for all the members of an apartment. You must bring your own dishes with you or buy them in Germany. There are also toilets and showers on each floor.
Please note: Bed-linen and coverlets are not provided!
However, it is best to buy them once you are here.
The rent for a room in a dormitory is DM 300 to 450 per month. It has to be paid by standing order (all further information about this you will receive at the Office of International
Affairs after your arrival). Rooms can only be rented for a whole month. All students living in the dormitories have to pay a deposit of DM 500. This has to be paid into a bank on the forms provided before you will be allowed to move in. You will receive the necessary forms as part of your Housing Information Package which will be sent to the address you have given in your application form some four weeks prior to the time when you move in.
Remember that you can only move into your room on Mondays to Fridays (unless it is a holiday). Should you wish to come to Stuttgart before your contract for your room begins or at the weekend, you can stay overnight at one of the Guest Houses for Young People or at the Youth Hostel (see next paragraph for further information).
Temporary Accommodation for Young People
Should you come to Stuttgart at a time when you can not move into your dormitory room immediately, you can stay one or two nights at the youth hostel or at one of the guest houses for young people run by the Jugendsozialwerk.
The address of the Youth Hostel in Stuttgart is:
Jugendherberge Stuttgart
Haussmannstr. 27
Phone: ++49 711-24 15 83
Charge for members is about DM 25 and about DM 30 for others. The price is for a bed in a shared room with a number of others and includes breakfast. It is not possible to make
Information Package 14
Office of International Affairs General Information telephone reservations. The Youth Hostel is very nice and very conveniently located (approx. 10 min. on foot from the Central Bus and Railway Stations).
You can reach the Youth Hostel by taking the streetcar from within the Central Railway
Station or Hauptbahnhof at the stop called Arnulf-Klett-Platz (follow the sign with a white
U on a blue background). Buy a ticket at one of the orange ticket machines: 1 zone . Take the streetcar U15 travelling in the direction of Heumaden-Sillenbuch . Get off at the stop marked Eugensplatz . Walk down Kernerstrasse (downhill) and follow the youth hostel sign.
The address of the Guest House run by the Jugendsozialwerk is:
Jugendsozialwerk
Richard-Wagner-Str. 2, phone: ++49 711-24 11 32 fax: ++49 711-23 61 10
The price of a single or double room lies between DM 30,-- and DM 45,-- with breakfast.
Rooms can be reserved in advance. However, the Guest House is situated somewhat outside of the city centre.
You can reach the Guest House by taking the streetcar from within the Hauptbahnhof at the stop called Arnulf-Klett-Platz (follow the sign with a white U on a blue background).
Buy a ticket at one of the orange ticket machines: 1 zone. Take the streetcar U15 travelling in the direction of Heumaden-Sillenbuch . Get off at the stop marked Bubenbad . On your right you will find the Richard-Wagner-
Straße and the first house on the right hand side is the Guest House of the Jugendsozialwerk.
Health Insurance
At registration, all students must demonstrate proof of health insurance as prescribed by
German law. Those students who fulfil one of the following conditions can obtain the necessary proof at one of the local health insurance companies (the Office of International
Affairs will provide you with the addresses upon your arrival).
EU-Citizens:
EU-Citizens are required to present Form E109 or Form E111 which they can obtain from their home health insurance company. Upon presentation of this form at one of the local health insurance companies the holder will be presented a Certificate of Sickness Insurance called a Krankenschein.
This certificate must be presented to the doctor, dentist or at a hospital. If you fail to do so you will be expected to pay in cash. At the same time, you will be given a Krankenversicherungsnachweis which you will need for registration at the university. Further information can be found in the Welcome-Guide which either your
SOCRATES Student Advisor will give you on arrival in Stuttgart or which you will receive from Ms. Burger at the Office of International Affairs.
Visiting Students from the USA, Canada, Australia and other non-EU-Citizens:
The local health insurance companies in Stuttgart can exempt you from the compulsory insurance providing you can demonstrate that you have equivalent coverage from a health
Information Package 15
Office of International Affairs General Information insurance in your own country. However, to avoid financial difficulties because you will be expected to pay cash straight away and then claim from your own insurance company yourself, we urgently recommend that you obtain a low-priced health insurance for students in Stuttgart. It costs about DM 95 per month and covers medical treatment by a doctor (inclusively dentist) as well as hospital treatment. This insurance also has the advantage that you do not have to pay for treatment in advance because the insurance company settles directly with the doctor. Further information can be found in the Welcome-Guide which you will receive from Ms. Burger at the Office of International Affairs or from your SOCRATES Student Advisor.
The health insurance for students takes effect at the beginning of the Winter Semester (1
October) or the Summer Semester (1 April). Therefore we recommend that students participating in the German Intensive Course purchase a travel sickness insurance in their home country for the month of September or March respectively.
Medical Care
German universities do not provide medical service on campus. Like all other persons with health insurance, students have a free choice among those doctors who have been registered by the health insurance company. As mentioned under the paragraph Health Insurance, health insurance companies that offer sickness insurance for students settle directly with the doctor, dentist or hospital.
If a student has a psychological problem, it is possible to receive assistance from the Psychological Consulting Service of the Student Union Psychologische Beratungsdienst des Studentenwerks free of charge. The address can be found in the Welcome-Guide or can be obtained from the Office of International Affairs.
Public Transport
Public transport in the Stuttgart region is very good so it is not essential to have a car.
There is an extensive underground system called the S-Bahn, a streetcar system, the U-
Bahn, and buses. The airport is about thirty minutes away from the Hauptbahnhof by S-
Bahn. It takes about ten minutes on foot to reach the City Centre Campus from the
Hauptbahnhof or the stop called Stadtmitte . The S-Bahn stops in the middle of the
Vaihingen Campus. This stop is called Universität . It is ten minutes away from the
Hauptbahnhof on the S1 heading for Herrenberg or the S2 and S3 heading for Vaihingen or Flughafen. Students who live on the campus in Ludwigsburg take the S4 heading for
Marbach and get off at the station Favoritepark. The S-Bahn ride takes 20 minutes and requires a ticket with three zones. The dormitories in Ludwigsburg are five minutes away from the S-Bahn station Favoritepark. Students who have lectures on both the City Centre
Campus and the one in Vaihingen should purchase a Semester Ticket, Semesterfahrkarte, which is valid for the whole semester and costs about DM 290 (two zones). Further information is available at The Office of International Affairs.
Information Package 16
Office of International Affairs General Information
Banking
Cash is still frequently used in Germany. Credit cards (Mastercard, Visa etc.) are not accepted everywhere. You should always check before you order your meal etc., and make sure that you have sufficient cash with you.
All visiting students need a bank account because rent for a dormitory room can only be paid for by standing order. The SOCRATES Student Advisor or The Office of International
Affairs can assist you in choosing a suitable bank. Tips can also be found in the Welcome
Guide.
Telephoning
The code for phoning Stuttgart from abroad is as follows: ++49-711-phone number
( ++ = the dialling code for a foreign country; 49 = the area code for Germany; 711 = the local dialling code, e.g. Stuttgart)
If you are phoning within Germany add a 0 to the local dialling code e.g. Stuttgart would be: 0711 + phone number
If you are dialling a number in Stuttgart from within Stuttgart you do not need the local area code. To phone from a public telephone box you will need DM 0,20 (2 x 10 Pfennige).
Telephone Cards are available priced DM 12 or DM 50. There is a telephone on each floor in the dormitory. You can also have your own telephone in your dormitory room. We re- commend that you buy a telephone yourself at a cost of about DM 50 depending upon the model chosen. The TELEKOM charges around DM 30 per month for the connection. This is in addition to the charges for the individual calls.
The City of Stuttgart
Stuttgart, which is the state capital of Baden-
Württemberg, has a population of about
560.000. Stuttgart lies in a basin. The lowest point is the River Neckar, which is about 200 metres above sea-level, and the highest is at Stuttgart-Vaihingen at approx. 550 metres.
Stuttgart is the cultural centre of the State of BadenWürttemberg with a wealth of theatres and concert halls. It is also the home of the world-famous ballet and there are museums and art-galleries as well as academies of music and art. "Miss Saigon" is being performed in one of the music halls and “Beauty and the Beast” in the other. Every year thousands come from far and near to enjoy the Cannstatter Volksfest , a public festival with a huge amusement park which takes place at the end of September on the common called the
Cannstatter Wasen . In the course of time this festival has become second only to the
Oktoberfest in Munich.
Stuttgart is also one of the largest agriculture, fruit and viticulture centres in the Federal
Republic. Many of the most renown companies like Mercedes-Benz and Bosch have factories here. In addition, there are numerous smaller companies involved in the production of machine tools, textiles and clothes, precision instruments, food and luxury items. There are also companies that specialise in woodworking, leather processing and making shoes or musical instruments as well as a number of large breweries. There is also a small paper
Information Package 17
Office of International Affairs General Information and chemical industry. Over 300 publishing houses and a highly developed graphic industry has given Stuttgart the reputation of being Germany's "Book Town" No 1.
Climate
The climate in Stuttgart is moderate and the average annual temperature is 10 °C. The relatively warm summers and mild winters are characteristic of the Stuttgart climate. However, it is quite possible that the temperature in winter will go far below freezing-point which makes it necessary to have winter clothes as well as rainproof clothing.
How to get to Stuttgart-Vaihingen
By train:
You will arrive at the Central Railway Station in Stuttgart called Hauptbahnhof.
Buy a ticket at one of the orange ticket machines: 2 zones (about DM 3,50). Go to the S-Bahn station which is on the bottom floor. Take the S-Bahn S1 travelling in the direction of Herrenberg or the S2 or S3 travelling in the direction of Vaihingen or Flughafen. Get off at the stop marked Universität . Take the exit Universitätszentrum. See the map of Vaihingen for further assistance.
By plane:
In the Arrival Hall at Stuttgart Airport you will see the sign directing you to the S-Bahn. It is a white S on a green background. Buy a ticket at one of the orange ticket machines: 2 zones (DM 3,30). Go to the S-Bahn station which is on the bottom floor. Take the S-Bahn
S2 going in the direction of Schorndorf or the S3 travelling in the direction of Backnang.
Get off at the stop marked Universität . Take the exit Universitätszentrum. See the map of
Vaihingen for further assistance.
By car:
If you are arriving from Munich or Karlsruhe, take the motorway A 8 to Stuttgarter Kreuz.
Then, follow the sign to the City Centre Zentrum/Vaihingen via the A 831/B 14 till the exit showing Universität. Turn left at the first traffic light and you are now in the Universitätsstrasse. See the map of Vaihingen for further details.
If you are arriving from Zurich/Singen, take the A 81/A 831 till the exit Universität. Turn left at the first traffic light and you are now in the Universitätsstrasse. See the map of Vaihingen for further details.
If you are arriving from Mannheim/Heilbronn, take the A 6/A 81 till you reach Autobahndreieck Leonberg. Then take the motorway A 8 in the direction of Munich until you reach the Stuttgarter Kreuz. Follow the sign to the City Centre Zentrum/Vaihingen via the
A 831/B 14 till the exit showing Universität. Turn left at the first traffic light and you are now in the Universitätsstrasse. See the map of Vaihingen for further details.
Information Package 18
Office of International Affairs
Information Package
General Information
How to get to the dormitories in Ludwigsburg
By train:
You will arrive at the Central Railway Station in Stuttgart called Hauptbahnhof . Buy a ticket at one of the orange ticket machines: 3 zones (about DM 5). Go to the S-Bahn station which is on the bottom floor. Take the S-Bahn S4 travelling in the direction of Marbach. Get off at the stop called Favoritepark . The dormitories are 5 minutes away from this S-Bahn stop on the left hand side of the track in the travelling direction of the train.
By car:
If you are arriving from Munich or Karlsruhe, take the motorway A 8 till you reach the Autobahndreieck Leonberg. Then take the A 6/A 81 (direction Heilbronn) till the exit showing
Ludwigsburg Nord. If you are arriving from Mannheim/Heilbronn, take the A 6/A 81 till you reach the exit showing Ludwigsburg Nord. Turn right (direction Ludwigsburg) at the first traffic light and you are now on the B 27 . Follow the B 27 for about 4 km till you pass under a bridge. Then turn left into the Reutteallee (follow the sign "Hochschulen"). See the map of Ludwigsburg for further details.
How to get to the Office of International Affairs
By train:
You will arrive at the Central Railway Station in Stuttgart called Hauptbahnhof.
It takes 5 minutes to walk from the station to The Office of International Affairs. Take the Lautenschlagerstraße, turn right into the Kronenstraße which is crossed by the Friedrichstraße.
Take the pedestrian crossing and turn left into the Friedrichstraße. After 50 m turn right into the Geschwister-SchollStraße. The entrance to No. 24 is on the right side opposite a furniture store called „Interio“. You will find The Office of International Affairs on 1st floor.
By plane:
In the Arrival Hall at Stuttgart Airport you will see the sign directing you to the S-Bahn. It is a white S on a green background. Buy a ticket at one of the orange ticket machines: 2 zones (about DM 3,50). Go to the S-Bahn station which is on the bottom floor. Take any
S-Bahn ( S2 or the S3 ). Get off at the stop marked Hauptbahnhof . Take the exit
Kronen straße
. See map for further details. The entrance to the Geschwister-Scholl-Str.
No. 24 is on the right side opposite a furnit ure store called „Interio“. You will find The Office of International Affairs on 1st floor.
By car:
If you are arriving from Munich or Karlsruhe, take the motorway A 8 to Stuttgarter Kreuz.
Then, follow the sign to the City Centre Zentrum via the A 831/B 14 . Follow the B 14 until downtown Stuttgart and then follow the sign to the Hauptbahnhof (central railway station).
See map for further details.
If you are arriving from Zurich/Singen, take the A 81/A 831 which changes into B 14.
Follow the B 14 until downtown Stuttgart and then follow the sign to the Hauptbahnhof (central railway station). See map for further details.
If you are arriving from Mannheim/Heilbronn, take the motorway A 6/A 81 till the exit
Stuttgart-Zuffenhausen. Follow the sign to the City Centre Zentrum via B 10/B 27.
19
Office of International Affairs General Information
About 200 m after you have passed the Hauptbahnhof (central railway station on the left) in downtown Stuttgart turn right into Geschwister-SchollStraße.
The entrance to No. 24 is on the right side opposite a furniture sto re called „Interio“. You will find the Office of International Affairs on 1st floor.
What you need to think of prior to coming to Stuttgart
The following papers and documents have to be brought with you to Germany:
Letter of Admission (Zulassungsbescheid) including a bank transaction form for the
Studentenwerk fee of DM 60.
Housing information package including a bank form for the deposit of DM 500, see page 14
Your passport
3 passport photos, see pages 8 and 13
Visa:
Citizens of a non EU-country and non US citizens such as Australia, Canada, etc. need a visa. Citizens of the USA and the EU do NOT need a visa to enter the country, see page 13
Proof of sufficient financial resources, see page 13, e.g. bank statement (a form for a bank statement is available at the Office of International Affairs, e-mail: incoming.visiting@ia.uni-stuttgart.de
Students FROM EU-COUNTRIES ONLY: form E 109 or E 111 (health insurance), see page 15
Students FROM NON-EU-COUNTRIES ONLY coming in September or March: travel sickness insurance, see page 15
Items of practical use:
If you arrive in Stuttgart on a Saturday/ Sunday please remember that you will not be able to move into your dorm room. We suggest you stay at the youth hostel or at a guest house, see page 14. For room reservations at a guest house in advance, please ask Ms. Gertrud Burger at the Office of International Affairs or your SOCRATES Student Advisor.
Make sure that you have enough cash available: You will have to pay a deposit for your room of 500 DM (see page 14) and you will need some cash (about 5 DM) for the
S-Bahn ticket from the airport to the Vaihingen campus (see page 18). Most ticket machines accept 10 and 20 DM notes.
Do not forget to bring your sleeping bag ( bed linen is not provided in the student dorms), clothing for rainy and cold weather (climate see page 18) and any medicine you might regularly need to take.
For all electrical appliances you will need a 220 volt adapter.
Information Package 20
Office of International Affairs
General Information
Information Package 21
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Mechanical Engineering is the major pillar of our industrial employment and production system besides the branches of Civil Engineering, Chemistry and Electrical Engineering.
With the introduction of modern techniques, Mechanical Engineering has been passing major changes. Where in former times the construction and production of machines for industrial purposes was the major task of mechanical engineers, the engineers today have a much broader field of tasks in the areas of construction, manufacturing energy technology, vehicle and engine design, precision technology up to products of machines of every days life. Totally different products like high speed trains and cardiac pacemaker, laser tools and modern household machines, modern motor vehicles and high tech bicycles, whole power plants and small domestic heating facilities are products of Mechanical Engineering creativity. But also consequences of techniques’ application have to be considered and investigated. These areas extend the tasks of mechanical engineers. Safety, environmental, ergonomic and economic aspects are to be mentioned in this connection.
At the Universität Stuttgart excellent modern experimental and computer simulation facilities are available by the scientific combination of research and education. Many linkages to industries as well as national and international research linkages and projects offer the possibilities to study at the first line. The teaching and research fields are mentioned in the following descriptions of the institutes. During their project works and diploma thesis students are involved in institutes life and activities. Students who attained the diploma degree with very good success, do have the possibility to increase their knowledge in special fields by a supplementary doctoral thesis (research based).
Institute of Energy Economics and Rational Use of Energy (IER)
Internet-Homepage: http://www.ier.uni-stuttgart.de
Energy Economics and System Analysis
New Energy Technologies and Technology Analysis
Technology Assessment and Environment
System Theory and Modelling
Rational Use of Energy
Information Package 22
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Institute of Nuclear Technology and Energy Systems (IKE)
Internet-Homepage: http://www.ike.uni-stuttgart.de
Reactor Safety, Reactor Systems and Environment (RSU)
Reactor Physics (RP)
Thermofluiddynamics (TFD)
Energy Conversion and Thermal Engineering (EW)
Heating, Ventilating, Air-Conditioning (HLK)
Knowledge Engineering and Numeric (WN)
High Temperature Technology (HTT)
Institute of Fluid Mechanics and Hydraulic Machinery (IHS)
Internet-Homepage: http://www.ihs.uni-stuttgart.de
Applied Fluid Mechanics
Hydraulic Machinery and Fluid Transients
Small Hydro Power
Institute of Combustion Technology (ITV)
Internet-Homepage: http://www.uni-stuttgart.de/itv
Combustion Chemistry
Mathematical Modelling of Reaction Flows
Laser Diagnostics
Institute of Thermal Turbomachinery and Machines Laboratory (ITSM)
Internet-Homepage: http://www.itsm.uni-stuttgart.de
Turbines, Fans and Compressors
Computational Fluid Dynamics (CFD)
Measurement Techniques
Technical Acoustics
Institute of Thermodynamics and Thermal Engineering (ITW)
Internet-Homepage: http://www.itw.uni-stuttgart.de
Heat and Mass Transfer
Measurement of Thermophysical Properties
Refrigeration
Rational Use of Energy
Heating and Cooling
Thermal Solar Energy
Information Package 23
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Institute of Internal Combustion Engines and Automotive Engineering (IVK)
Internet-Homepage: http://www.uni-stuttgart.de/ivk
Internal Combustion Engines
Vehicle Aerodynamics
Noise, Vibration Harshness
Automotive Engineering and Energy Balance
Simulation and Software Technology
Institute of Process Engineering and Power Plant Technology (IVD)
Internet-Homepage: http://www.ivd.uni-stuttgart.de
Boiler Technology
Combustion Technology
Process Engineering
Air Pollution Prevention
Power Generation and Automatic Control
State Material Testing Institute (MPA)
Internet-Homepage: http://www.mpa.uni-stuttgart.de
Testing Research & Development, Teaching
Materials, Welding
Material and Structural Components Testing
Strength Analysis
System and Plant Analysis
Approval of Materials and Components
Non-destructive Material and Components Testing
Vehicle Safety
Tribology
Damage Studies and Research
Application of Computer Science in Mechanical Engineering (AIM)
Internet-Homepage: http://www.csv.ica.uni-stuttgart.de
Applied Computer Science (AIM)
Design of Integrated Software Systems
Simulation of Scientific and Technological Systems on High-performance Computers
Methods of Computer Aided Engineering (MCAE)
Scientific Visualisation
Software Environment RSYST for Integration of Application Software
Information Package 24
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Institute of Human Factors and Technology Management (IAT)
Internet-Homepage: http://www.iat.uni-stuttgart.de
Human Resource Management
Information Management
Production Management
R&D Management
Software Management
Work Design
Institute B of Mechanics (MECHB)
Internet-Homepage: http://www.uni-stuttgart.de/mechb
Engineering Dynamics
Multibody Systems
Non-linear Dynamics
Mechatronics
Vehicle Systems Dynamics
Biomechanics
Institute of Biomedical Engineering (BMT)
Internet-Homepage: http://www.bmt.uni-stuttgart.de
Diagnostic and Therapeutic Instrumentation and Procedures
Medical Imaging Systems and Image Processing
Acquisition and Processing of Physiological Signals
Cardiovascular Monitoring
Minimally Invasive Surgery
Physiological Models
Cellular Engineering
Artificial Organs
Institute for Manufacturing Technologies of Ceramic Components and
Composites (IFKB)
Internet-Homepage: http://www.uni-stuttgart.de/IFKB
Manufacturing Technologies of Ceramic Components
Inorganic Composites
High Energy Surface Technologies
Information Package 25
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Institute of Materials-handling Technology (IFT)
Internet-Homepage: http://www.uni-stuttgart.de/ift
Rope Engineering
Warehouse Technology and Logistics
Materials-handling Technology and Industrial Trucks
Materials-handling Technology for Waste Management
Institute of Industrial Manufacturing and Management (IFF)
Internet-Homepage: http://www.iff.uni-stuttgart.de
Organisation Development and Factory Planning
Quality Management and Manufacturing Metrology
Manufacturing Methods and Processes
Production Technologies for Microsystems
Surface Technology
Assembly Technology
Institute of Design and Production in Precision Engineering (IKFF)
Internet-Homepage: http://www.uni-stuttgart.de/ikff
Electromechanical Direct Drive Linear Motors
Ultrasonic Drives
Injection Moulding
Metrology and Sensors
Theory of Design Process
Institute of Machine Components (IMA)
Internet-Homepage: http://www.ima.uni-stuttgart.de
Transmission Technology
CAD
Sealing Technology
Institute of Machine and Gearing Design (IMK)
Internet-Homepage: http://www.imk.uni-stuttgart.de
Power Transmission
Industrial and Vehicle Gearing
Machine Elements
Friction and Lubrication
Design Theory
Industrial Design
Information Package 26
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Institute of Control Technology of Machine Tools and Manufacturing Systems
(ISW)
Internet-Homepage: http://www.isw.uni-stuttgart.de
Control Technology
Software Technology
Planning and Master Control Technology
Machine and Robotic Systems
Direct Drive Systems and Sensors
Mechatronic Systems
Institute of High Power Beam Technology (IFSW)
Internet-Homepage: http://www.ifsw.uni-stuttgart.de
Laser Materials Processing Technologies
Laser Development and Laser Optics
Modelling and Simulation of Processes
Gasdynamic Components for Laser Systems
Institute of Technical Optics (ITO)
Internet-Homepage: http://www.uni-stuttgart.de/UNIuser/ito
Optical Metrology
Laser Measuring Techniques
Optical Sensors
Image Formation and Image Processing
Institute of Metal Forming Technology (IFU)
Internet-Homepage: http://www.uni-stuttgart.de/uniuser/ifu
Fundamentals of Metal Forming
Metal Forming Technology
Tooling for Metal Forming
Machine Tools for Metal Forming
Institute of Machine Tools (IFW)
Internet-Homepage: http://www-ifw.uni-stuttgart.de
Metal Cutting Technology
Machine Dynamics and Structural Components
Automation Systems
Wood Working
Information Package 27
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Institute of Time Measurement Engineering, Precision- and Micro-Engineering
(IZFM)
Internet-Homepage: http://www.uni-stuttgart.de/izfm
Micromachining
Surface Technology
Miniaturised Stepper Motors
Bearing Technology
Measuring Technology
Mechanical and Electronic Clock Engineering, Radio-Controlled Clocks
Information Package 28
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Semester:
Type:
WS
L + E
Hours per Week: 2+1
Prerequisites: --
Examination: oral
Credits: 4,5
Semester:
Type:
Examination: recommended semester:
WS
SS
L
E
S written oral
= Winter Semester
= Summer Semester
= Lecture (Vorlesung)
= Exercise (Übung)
= Seminar (Seminar)
= written exam (sc hriftliche Prüfung)
= oral exam (mündliche Prüfung) certificate = course certificate (Schein/ erfolgreiche Teilnahme)
Credits: Number of credits
The credit system is based on 60 credits per academic year.
More detailed descriptions regarding the presentation of course credits can be found in the examination regulations. Examinations in some courses of Stage 1 Studies
(Grundstudium) 1 are combined in blocks.
Prerequisites:
The description of the courses contains no further information about the required prerequisites. The participation in any lecture of the Stage 2 Studies (Hauptstudium) 1 requires a passed Stage 1 Studies (i.e. „Vordiplom“) or equivalent. International programme students are expected to have successfully completed at least two years studies.
1
See page 10/ Part A
Information Package 29
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
The Stage 2 Studies (‘Hauptstudium’) of Mechanical Engineering require to have passed the prediploma examination in Mechanical Engineering (‘Maschinenbau-Vordiplom’) at a
German university or an equal college of higher education. In case that this pre-diploma examination does not comprise subjects which are part of the examination at the Universität Stuttgart, recognition is possible with additional requirements. University of Applied
Science degrees (‘Fachhochschulabschlüsse’) and international bachelor certificates in
Mechanical Engineering can also be recognised but with the compulsory completion of 3 subjects of the advanced Stage 1 Studies (‘Grundstudium’) in order to be synchronised with the curriculu m of the Universität Stuttgart.
The Stage 2 Studies of Mechanical Engineering comprise 8 obligatory subjects, the subject of Measurement Technology, one non-technical subject, and two main subjects with project works and the diploma thesis at the end. The obligatory subjects are chosen from
8 groups.
The two main subjects are chosen from a selection of 40 different subjects. Main subjects consist of core and complementary subjects; the lectures of both together amount to 10 hours per week. The core subjects are obligatory for the respective main subject. The two main subjects can be combined with each other and with any obligatory subject. The exams in a main subject can be either oral or oral and written or written.
In each of the two main subjects a project work, the so called Studienarbeit, has to be carried through. It represents a supervised research work of about 350 hours at an institute or in industry (in close cooperation with the institute). The results have to be presented orally.
In addition, a practical course is required. It consists of 8 experiments from which 4 to 6 have to be part of the respective main subject. The remaining experiments should be chosen at will from other fields of study (General Mechanical Engineering Practical).
The final thesis, the so called Diplomarbeit, completes the academic education. It is covering a scope of 4 months. The student has to show that he is capable of dealing on his own with a problem in the field of Mechanical Engineering within a given period. The type of problem should be taken from one of the two main subjects and is supervised by academic staff.
Both, Studien- and Diplomarbeit (final project) can easily be carried through within an exchange programme.
The main subjects represent the fields of research of the institutes of the faculties of Mechanical Engineering and of related faculties. In the following chapter, the institutes present their respective teaching programme provided for the various main and obligatory subjects. The courses of these programmes are only part of the Stage 2 Studies. In consultation with the responsible lecturer, the contents of each lecture can be examined orally and certified for studies at other universities.
Information Package 30
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
The faculties of Mechanical Engineering offer the following various studies:
course of study leading to a diploma degree (‘Diplom’) in Mechanical Engineering as described above,
9 semesters
Degree: Dipl.-Ing.
complementary studies in Mechanical Engineering for graduates of Universities of Applied Science (“Fachhochschulen”), “Berufsakademien” and Bachelors of foreign universities,
4 Semesters,
Degree: Dipl.-Ing.
main subject “Mechanical Engineering” within the course of study of Technical Pedagogic
integrated foreign studies within international students exchange programmes and the
Sokrates/ Erasmus programme
The different courses offered are described in special brochures which are available from the dean’s offices:
-
-
-
Plan of Studies (“Studienplan”) of Mechanical Engineering
Examination Regulations (“Prüfungsordnung”) for the study of Mechanical Engineering
Regulation for Industrial Practical Training (“Praktikantenordnung”)
[The brochures are written in German.]
Information Package 31
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
3.1 Mechanical Railway Technology
(Bahntechnik)
Education and Research Field Railway Vehicle Technology
Institute of Railway and Transportation Engineering
Basics of Trains I/II (Bögle)
Grundlagen der Schienenfahrzeuge I/II
General traffic questions and a general survey on railway techniques. Train resistance, calculation of performance, consumption of power, economics. Track, wheel set, axle bearing, bolster spring, deleader, couplers, running gears, bogies. Brakes, safety devices.
Views on running qualities of trains, views on derailment. Built vehicles: locomotives, railcars, freight cars, passenger stock (construction, interior fittings, heat regulations, airconditioning plants), maintenance of cars and facilities. New technologies.
Semester:
Type:
WS/SS
L + E
Hours per Week: 3+1
Prerequisites: --
Examination: oral
Credits: 6
Design and Operation of Railways (Heimerl)
Betrieb und Entwurf von Schienenbahnen
Constructional Fundamentals of railways, elements of superstructure, connections between vehicle and railways, movements, elements of the lay-out of lines, fundamentals for the calculation of running-time and energy costs, planning and construction of lines and stationary installations, safeguard of lines and vehicle-sequences, construction during running-on-operation.
Semester: WS Hours per Week: 2+1 Examination: oral
Type: L + E
Diesel Tractive Units (Bögle)
Dieseltriebfahrzeuge
Prerequisites: -- Credits: 4,5
Diesel engines of railway vehicles. Transmission: gearsets, hydrostatic power transmissions, oil gears (flow converter, hydraulic clutch), combinations of gears, hydraulic brakes.
Electric transmission. Axle drive and axle guide. Cooling, supporting facilities. Locomotives and railcars.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 32
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Electric Traction (Kleinschmidt)
Elektrische Zugförderung (Elektrische Bahnen I)
History of the electric traction, economical questions. Axle drives, axle guide. Railway engines, electric control, transformer, supporting facilities. Three-phase alternating current techniques. Types of locomotive and railcars. Overhead contact lines, traction current: energy demand, power station, converter stations, sub-stations, traction system, deviceequipment.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Guiding of the Vehicles (Bögle)
Gleislauftechnik
Guidance, track forces. Kinematics of running qualities of trains, views on derailment, regular movement of vehicles.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Electric Trains II (Gutt)
Elektrische Bahnen II
Direct current, alternating current and three-phase current railway systems. Problems of balance and loading division, transformation and connection of different systems. Rotating converters and mechanical problems caused by power pulsation. Static converters. Direct converters in sub-stations. Frequency converters on locomotives. Modern railway systems: direct-current motors. Three-phase motors. Electric linear motors.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Network and Operation Planning in Public Transport (Heimerl)
Netz- und Betriebsplanung
Operation-planning and operation, operating control, train-service, function and content of timetables, construction of timetables, different types of timetables, duty list, locomotive roster, traffic control, calculation of the capacity of lines and junctions, fundamentals of network planning in public transport, capacity of transport modes, network of lines, positioning of stops, connections between networks.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 33
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Transport Economics (Heimerl)
Verkehrswirtschaft
National economic and economic factors of transport planning, demand in transportation planning, supply of transportation capacity, cost- and economical investigations, costbenefit-analysis, evaluation of investments, regards of the environment.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Air Transport and Airport Installations (Dold, Wedekind)
Luftverkehr und Flughafenanlagen
Development of air transport and planes, air traffic control, installations of air- and landside of airports, capacity and operation of airports, planning of airports and their installations, sequence of construction and constructional problems of airports at the example of the construction of a runway.
Semester:
Type:
WS/SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Transport-Logistics (Dobeschinsky)
Transportlogistik
Transport-logistics and logistical service, extent of logistical control, logistical fundamental process, standards of logistics, persons involved in the logistical process, framework of logistical processes (production, markets, technology, information) logistic as a system.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
3.2 Biomedical Engineering
(Biomedizinische Technik)
Institute of Biomedical Engineering (BMT)
Biomedical Engineering I (Nagel)
Biomedizinische Technik I
Electrical properties of biological tissue; electrodes; transducers (electrical, electrochemical, thermoelectric, photoelectric, mechanoelectric, piezoelectric and electromagnetic transducers, biosensors); basic knowledge of signal acquisition; amplifiers for biopotentials; safety of medical equipment; acquisition of physiological signals: electroencephalogram (EEG), electrodurogram (EDG), electrocorticogram (ECoG), electroneurogram
(ENG) and evoked potentials (EP), electrocardiogram (ECG), vectorcardiogram, distribution of potentials, magnetocardiogram (MCG), electromyogram (EMG), electroretinogram
(ERG), electroocculogram and electronystagmogram, impedance cardiogram, phonocardiogram; diagnostics of pulmonary function.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: written
Credits: 4,5
Information Package 34
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Biomedical Engineering II (Nagel)
Biomedizinische Technik II
Diagnostics of the heart and cardiovascular system: blood pressure measurement (procedures, data acquisition), blood perfusion measurement (plethysmography), blood flow measurement (flow velocity, cardiac output, cardiac time intervals, functional parameters), devices for the support of hearing, speech and vision; replacement of functions and organs, functional electrical stimulation, imaging techniques (ultrasound, magnetic resonance, X-rays, radionuclide imaging, thermography, endoscopy), therapeutic procedures
(lithotripsy, diathermy, endoscopic procedures, electro- and laser surgery), anaesthesia equipment, rehabilitation, molecular electronics, cytotechniques.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: written
Credits: 4,5
Physiological Basics of Biomedical Engine ering I (Nagel, Gülch)
Physiologische Grundlagen der Biomedizinischen Technik I
Characteristics and elements of living systems; physical, electrical and chemical processes at the cell membrane; generation, transmission and processing of stimuli and information; myodynamics; aesthesiophysiology; brain; blood and cardiovascular system; respiration; locomotor system.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Physiological Basics of Biomedical Engineering II (Nage l, Gülch)
Physiologische Grundlagen der Biomedizinischen Technik II
Fundamental neurophysiology; motor, sensory and autonomic systems; reflexes; neuronal and humoral regulation and control processes; cardiovascular control; temperature control; neuronal networks, examples of biological information processing.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 35
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Medical Imaging Systems and Image Processing - Medico-Technical Radiology I
(Nagel, Nüsslin, Arlart)
Bildgebende Verfahren und Bildverarbeitung in der Medizin I – Medizinisch-
Technische Radiologie I
Physical and technical basics of image formation, digital image processing, as well as diagnostic and therapeutic procedures in radiology. Contents: basic system theory of image formation and image processing (Fourier transform, sampling, impulse response, transfer function, filtering, convolution, correlation, morphological operations); interaction of medically utilised rays and waves with biological matter; X-ray based diagnostic image generation; digital radiography; subtraction angiography; fundamentals and techniques of computerised tomography (CT), reconstruction techniques; X-ray CT; endoscopy; image processing applications; clinical demonstrations.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Medical Imaging Systems and Image Processing - Medico-Technical Radiology II
(Nagel, Nüsslin, Arlart)
Bildgebende Verfahren und Bildverarbeitung in der Medizin II – Medizinisch-
Technische Radiologie II
Physical and technical basics of image formation, digital image processing, as well as diagnostic and therapeutic procedures in radiology. Contents: ultrasonic echo imaging; radionuclide imaging (gamma camera, PET, SPECT); nuclear magnetic resonance tomography; parameter extraction, segmentation, pattern recognition, registration, fusion and restoration of medical images; 2- and 3-dimensional visualisation; clinical demonstrations and practical exercises.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Biomedical Process Engineering I/II (Planck, Schneider)
Medizinische Verfahrenstechnik I/II
Blood biochemistry; physiology of the circulatory system, kidney, liver, respiration; body fluids as viscoelastic liquids, clinical blood rheology; membranes: manufacturing and characterisation, transport mechanisms; characterisation and modification of surfaces of solids; analytic in the clinical-chemical laboratory; deep freeze conservation; biomaterials: definition, physical and biological requirements; artificial kidney; liver support; oxygenation procedures: heart-lung-machine; circulatory backup systems; medically relevant aspects of organ transplantation.
Semester:
Type:
WS/SS
L
Hours per Week:
Prerequisites:
4
--
Examination: oral
Credits: 6
Information Package 36
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Materials and Design of Endoprotheses (Planck)
Materialien und Konstruktionen von Endoprothesen
General requirements of materials and structures of implants, legal provisions and norms for biomaterials, biocompatibility and the influence of structural parameters on penetrative growth of connective tissue and bone will be discussed. The specific properties of the applied materials as well as proper processing and sterilisation will be dealt with. Based on examples, application specific requirements of materials, design and manufacturing of endoprotheses are discussed. Biohybrid organs for the endocrine organ replacement, which consist of a compound of living cells with plastic membranes, are presented.
Semester:
Type:
WS/SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Physiology for Engineers I/II (Gülch)
Physiologie für Ingenieure I/II
Respiration; circulatory system; general aesthesiophysiology; peripheral nerve; sensory organs eye and ear; experimental course.
Semester: WS/SS Hours per Week: 2
Type: L Prerequisites: --
Examination: oral
Credits: 3
Human Factors I/II (Bullinger)
Arbeitswissenschaft I/II
Introduction into industrial engineering; requirements and results of human labour; types of labour; labour environment.
Semester:
Type:
WS/SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
Physico-Chemical Procedures I (Eigenberger)
Physikalisch-Chemische Verfahren I
Disperse systems; boiling behaviour of solutions and mixtures; special isolation procedures; osmosis and dialysis, processes in membranes; ion exchange, electrophoresis; absorption; extraction.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
Information Package 37
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Fundamentals of Medical Radiation Technology (Pfister)
Grundlagen der medizinischen Strahlentechnik
For the application of ionising rays in medicine, an overview of the current development of medical radiation technology and radionuclide applications is given. The major systems used in radiological diagnostics and radiotherapy will serve as examples for the high precision which is required in generating, guiding, detecting and measuring rays. For all kinds of applied rays, the physical impulse processes, energy transfer, reaction chains and biological interactions will be described.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Occupational Medicine and Safety Technology (Schultheiss, Link, Pfister)
Arbeitsmedizin und Sicherheitstechnik
As the first aspect of this course, occupational physicians deal with health services at the work place: occupational diseases, acute and chronic illnesses, damages by noise, health hazards through metals and dangerous materials, addiction and labour, graphic terminals at work places. As complementary second aspect, safety engineers will present strategies to achieve the safety of industrial work places: internal organisation, occupational protection at machinery and equipment, handling of hazardous materials, transportation security, industrial radiation protection.
Semester:
Type:
WS/SS
L + E
Hours per Week: 2+1
Prerequisites: --
Examination: oral
Credits: 4,5
Information Package 38
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
3.3 Applied Dynamics
(Technische Dynamik)
Institute B of Mechanics (MECHB)
Dynamics of Machines (Schiehlen)
Maschinendynamik
Introduction to engineering dynamics including the theoretical basics of modelling and dynamics, computer-aided engineering methods and practical applications.
Kinematics and kinetics, principles of mechanics: D'Alembert, Jordain, Lagrange's equations of second kind, multibody system modelling, finite element modelling, continuous systems, computer-generated equations of motion for multibody systems based on Newton-Euler formalism, applications to mechanisms, rotor dynamics, vehicle dynamics, state space form for linear and non-linear dynamic systems with finite degree of freedom, free linear vibrations: eigenvalues, vibration modes, time behaviour, stability, forced linear vibrations: impulse, step and harmonic excitation, resonance, anti-resonance, critical speed of rotors.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Numerical Methods for Dynamics (Schiehlen)
Numerische Methoden der Dynamik
Introduction to numerical methods used for investigating dynamic systems. General principles of numerical calculations, machine numbers, error estimation, numerical stability, linear algebra: Cholesky-decomposition, Gaussian elimination, LU-decomposition, QRdecomposition, iterative methods, least square problem, eigenvalue problem: general basics, normal forms, power method, QR-algorithm, computation of eigenvectors, initial value problem: ordinary differential equations, Runge-Kutta methods with step size control, extrapolation methods, linear multistep methods, -applications, programme libraries, comparison of methods for analytical investigations with computational methods.
The lecture is supplemented by computer exercises.
Semester:
Type:
SS
L + E
Hours per Week: 2+1
Prerequisites: --
Selected Problems in Mechanics (Schiehlen)
Ausgewählte Probleme der Mechanik
Examination: oral
Credits: 4,5
The lecture is devoted to selected topics of mechanics like vehicle dynamics, robotics, optimisation of multibody systems.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 39
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Applied Dynamics I/II (Meinke)
Angewandte Dynamik I/II
Specific problems of industrial applications are considered in detail:
-
- passive dynamic systems: printing machines, railway vehicle systems, centrifuges active dynamic systems: magnetic bearings, electronic guidance of busses, self-organising systems
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Introduction to Mechatronics (Meinke)
Einführung in die Mechatronik
Mechatronics is an interdisciplinary field combining mechanical engineering, electrical engineering and informatics.
Actors, sensors, control, communication, applications.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Boundary Element Method in Static and Dynamics (Gaul)
Randelementverfahren in Statik und Dynamik see main course „Engineering Mechanics“
Control Technology for Machine Tools and Industrial Robots (Pritschow)
Steuerungstechnik der Werkzeugmaschinen und Industrieroboter see main course „Control Technology“
Simulation Engineering (Zeitz)
Simulationstechnik see main course „Control Engineering“
3.4 Electronics Manufacturing
(Elektronikfertigung)
Institute of Microelectronics
Manufacturing of Electronic System (Höfflinger)
Fertigung elektronischer Systeme
Active and passive devices transistors and integrated circuits; materials for microelectronic additive and subtractive processes; lithography; ultraclean processing; process integration; cost of ownership; yield and reliability; time and cost for prototyping and production; electromagnetic interference; testing; monolithic and hybrid integration; packaging; technical and physical limits.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Information Package 40
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Quality Assurance of Electronic Systems (Höfflinger)
Qualitätssicherung elektronischer Systeme
Designed-in quality (Taguchi methods); hardware description; fault coverage; failure mode and effect analysis; total process and quality management; learning and productivity curves; cost of quality; zero-defect concepts.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Basics of Microtechniques I/II (Kück)
Grundlagen der Mikrotechnik I/II see main course „Precision Mechanics and Microtechniques“
Electronics for Engineers in Precision Engineering (Effenberger)
Elektronik für Feinwerktechniker se e main course „Precision Mechanics and Microtechniques“
Basics in Precision Engineering; Design and Manufacturing (Schinköthe)
Grundlagen der Feinwerktechnik, Konstruktion und Fertigung see main course „Precision Engineering“
Actuators in Precision Engineering - Design, Dimensioning and Applications
(Schinköthe)
Aktorik in der Feinwerktechnik – Konstruktion, Berechnung und Anwendung see main course „Precision Engineering“
Laser Processes in Fine Mechanics (Hügel, Dausinger)
Laserverfahren für die Feinwerktechnik see main course „Laser Material Processing“
Optical Measurement Technique and Measuring Procedure (Tiziani)
Optische Meßtechnik und Meßverfahren see main course „Technical Optics“
Control Technology for Machine Tools and Industrial Robots (Pritschow)
Steuerungstechnik der Werkzeugmaschinen und Industrieroboter see main course „Control Technology“
CAM, CAP, CAD/NC - Automation of Technological Information Flow I (Storr)
CAD/CAM-Automatisierung des technischen Informationsflusses see main course
„Control Technology“
Information Package 41
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
3.5 Technologies for Energy Saving
(Technologien zur Energieeinsparung)
Institute of Thermodynamics and Thermal Engineering (ITW)
Calculation of Heat Exchangers (Hahne, Sohns)
Berechnung von Wärmeübertragern
Recuperative heat exchangers: kinds and types of construction, fundamentals of calculation, basic flow arrangements, overall heat transfer, calculation of the log mean temperature difference and the temperature distribution, recuperator analysis using NTU-charts, heat transfer and pressure drop, effect of heat losses and fouling, finned surfaces. Regenerative heat exchangers: operation, fundamentals of calculation, temperature distribution and overall heat transfer, analysis, construction remarks.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Rational Heat Supply (Hahne, Spindler)
Rationelle Wärmeversorgung
Fundamentals of thermal engineering, negative isolation effects, steam diffusion through walls, thermodynamics of moist air, efficiency calculations, heat generation systems, combustion processes, combined heat-power-generation, heat demand for the heating of buildings, transient calculation of the thermal behaviour of buildings, heat recovery, utilisation of exhaust heat, heat supply conceptions.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Heat and Mass Transfer (Hahne or Hasse)
Wärme- und Stoffübertragung
Examination: oral
Credits: 3
Introduction; technical applications; heat conduction and diffusion; convective heat and mass transfer: single phase flow, radiation; convective heat and mass transfer: flow with phase change.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Efficient Energy Conversion (Hahne, Spindler)
Optimale Energiewandlung
Maximum attainable work, exergy, exergy of fuels, exergy losses during combustion, exergetic investigation of a compression heat pump, exergetic efficiencies of energy conversion processes, steam power plant, gas turbine, combined gas and steam cycle.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 42
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Solar Technology (Hahne)
Solartechnik
Physical fundamentals of solar radiation, selected fundamentals of radiation and heat exchange, design and calculation of flat-plate collectors, measurement and calculation of efficiencies, stores for sensible and latent heat, calculation and design concepts for solar heating systems (TRNSYS, FCHART-method), economy and examples of realised systems.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Heat Pumps (Sohns)
Wärmepumpen
Range of applications for heat pumps, heat sources, fundamentals, processes for compression- and absorption heat pumps, steam jet heat pump, thermoelectric heat pump, performance characterisation of heat pumps, working fluids, compression heat pump, compressor drives, compressors, heat exchangers, throttles.
Semester:
Type:
SS
L
Hours per Week: 2
Prerequisites: --
Examination: oral
Credits: 3
Refrigeration - Fundamentals and Industrial Application (Lotz)
Kältetechnik – Grundlagen und industrielle Anwendung
Industrial methods of refrigeration: refrigeration systems in food industry, refrigeration systems in process engineering, refrigeration plants for air conditioning, low temperature plants (decomposition of gas mixtures), special applications and topics of refrigeration.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Construction of Heat Exchangers (Reinhart)
Konstruktion von Wärmeübertragern
Types of construction and selection criterions, construction of shell-and-tube and parallel plate heat exchangers, devices for refrigeration, cooling towers, construction materials and corrosion protection, strength and acceptance specification.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Resource Free Energy Supply I (Winter)
Resourcenfreie Energieversorgung I
Energies of the world, potential, usage, role of non conventional energies, definition, character of cycle energies, physics of irradiation sun/ earth, solarthermal energy conversion with solarfarm systems at low, medium and high temperature range.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
0,5
--
Examination: oral
Credits: 0,75
Information Package 43
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
3.6 Energy Systems
(Energiesysteme)
Institute of Energy Economics and Rational Use of Energy (IER)
Energy Systems I: Basics of Energy Economics and Energy Supply (Voß)
Energiesysteme I: Grundlagen der Energiewirtschaft und Energieversorgung
General terms, economic principles in energy supply and demand, energy reserves, energy supply systems and their development, sources of energy and their use, structure and organisation of energy and electricity economics, physical and technical principles of electricity generating plants, impact of the energy sector on the environment.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
4
--
Examination: written
Credits: 6
Energy Systems II: Energy Facilities and Rational Use of Energy (Voß)
Energiesysteme II: Energieanlagen und rationelle Energieanwendung
Methods for the analysis of energy facilities, exergetic-analysis, Pinch-Point-analysis, process chain analysis, system comparison of energy facilities, rational use of energy, cogeneration, combined systems, waste heat interaction, heat recovery, new energy conversion techniques.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
District Heating Supply (Nonnenmacher)
Fernwärmeversorgung
Requirements on district heating supply, systems with and without power generation.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Energy and Developing Countries (Grawe)
Energie und Dritte Welt
Classification of developing countries, structure indicators, oil dependence and their results, fuelwood crisis, indicators for the future development, energy use in developing countries, own activities in the developing countries, German activities on the energy sector in developing countries, perspectives of future measures.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 44
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
German Electricity Sector (Grawe)
Die deutsche Stromversorgung zwischen Versorgungssicherheit, EG-Wettbewerb und Klimaschutz
The development of the electricity use, measures for rational use of energy, cogeneration, fossil, nuclear and renewable energy carriers in the electricity sector, protection of the environment and of the climate in the electricity sector, cooperation in the electricity sector in
Western Europe, the EU-market, measures for an improved competition, East-Westperspectives.
Semester:
Type:
WS
L
Hours per Week: 1
Prerequisites: --
Examination: oral
Credits: 1,5
Planning Methods in
Energy Economics (Voß)
Systemtechnische Planungsmethoden in der Energiewirtschaft
Basics of system analysis and system theory; goals of energy planning, modelling, time series and regression analysis, input-output analysis, linear and dynamic optimisation, planning under uncertainty, system dynamics, cost-benefit-analysis; energy demand models, energy system models, energy economic models, planning tools for the electricity and oil industry.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Energy and Environment (Friedrich)
Energie und Umwelt
Impacts of energy conversion on the environment and human health, air pollution
(SO
2
,NO x
,CO, particulates, VOC, ozone, aerosols, acidification and nitrification), global warming, radioactivity, land utilisation, noise, waste heat, electromagnetic radiation.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
District Heating (Hasenkopf)
Fernwärmeversorgung
The significance of district heating in Germany, determining of heat demand, district heating facilities, district heating, networks for transport and distribution, costs and economic consideration, environmental aspects of the district heating supply system.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 45
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Construction of Thermal-Power-Plant - Focus on Environmental Technology (Haag)
Bau von Wärmekraftwerken – Schwerpunkt Umwelttechnik
Basics of power generation, air pollution reduction, water use, protection of soil and ground water, environmental impacts of architectural design, pollution control measures and legal requirements.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Renewable Sources of Energy for Electricity Generation I/II (Kaltschmitt)
Regenerative Energieträger zur Stromerzeugung I/II
Meteorological and/ or physical basics of renewable sources of energy, technologies for the use of renewable energies, solar energy, wind power, hydropower, geothermal energy, biomass, potentials, costs and use in the context of the German energy system.
Semester:
Type:
WS/SS
L
Hours per Week:
Prerequisites:
1/1
--
Examination: oral
Credits: 1,5/1,5
Energy and Heat Supply Systems in Industry (Elsässer)
Energie und Wärmeversorgungssysteme in der Industrie
System and facility planning, district heating and process heat for industrial use, examples, project management.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Environmental Economics and Technology Assessment (Friedrich)
Umweltökonomie und Technikbewertung
Principles of environmental economics, concept of sustainable development, economics of depletable and renewable resources, methods for technology assessment, life cycle analysis, cost-effectiveness and cost-benefit-analysis, multiattribute utility analysis, monetizing of external effects, environmental instruments.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Strategic Enterprise Planning in the Network Based Energy Sector (Mattis)
Strategische Unternehmensplanung in der leitungsgebundenen Energiewirtschaft
Strategic enterprise planning, methods and parameters, influence of technical, economical and political parameters on the decisions of enterprises.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 46
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Waste Management in Energy Facilities (Stützle)
Entsorgung von Stoffen aus energietechnischen Anlagen
Power plant processes, environmental technology in power plants, waste production, waste use, quality aspects, legal aspects.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Power Engineering and Environmental Technology (Hein)
Energie- und Umwelttechnik see main course „Power Plant and Combustion Technology“
Fundamentals and Technology of Fuel Cells (Fischer)
Grundlagen und Technik von Brennstoffzellen see main course „Energy Technologies and Systems“
Thermal Power Plants (Stetter)
Thermische Kraftwerke see main course „Thermal Turbomachinery“
3.7 Energy Systems for Technical Building Equipment
(Energiesysteme zur technischen Gebäudeausrüstung)
Institute of Nuclear Technology and Energy Systems (IKE)
Basics of Heating, Ventilating and Air-Conditioning (Bach)
Grundlagen der Heiz- und Raumlufttechnik
Basic structure of heating and ventilation systems with benefits delivery, air preparation, distribution of heat and cold, energy production; meteorological, physiological and process technology rules for heating and ventilation systems, basics of fluid dynamics and heat technologies, air conditioning processes in the h,x-diagram, combustion, definition of design data, basics of control systems for heating, ventilating and air-conditioning.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Heating, Ventilating and Air-Conditioning Systems (Bach)
HLK-Anlagen
Calculation, construction and operational behaviour of equipment elements such as room heating panels, air heaters, coolers, heat recovery units, humidifiers, boilers, heat pumps, solar collectors, thermal storage tanks, fans, pumps, air terminal devices, air filters; construction, operational behaviour and energy demand of heating and ventilating systems and solar systems; acceptance and performance measurements.
Semester:
Type:
SS
L + E
Hours per Week: 3+1
Prerequisites: --
Examination: oral
Credits: 6
Information Package 47
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Planning of Heating, Ventilating and Air-Conditioning Systems (Bach)
Planung von HLK-Anlagen
Planning stages from preconception to performance index including the selection of the system type and the energy supply, economical calculation, overview of regulations. Planning of a complete system in block seminars.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Selected Energy Systems and Heating, Ventilating and Air-Conditioning Systems
(Bach, Groll)
Ausgewählte Energiesysteme und Anlagen
Processes of heat supply (heat station, combined heat and power stations, total energy units, heat pump, use of waste heat), elements of combined heat and power production, heat transport and distribution, economic calculation, alternative energy sources and fuels, regenerative energy sources, heat storage for electricity supply and for heating purposes.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Special Problems of Heating, Ventilating and Air-Conditioning (Bach)
Sonderprobleme der HLK
Questions of relevance to the present situation of heating, ventilating and air-conditioning technology such as: emissions of house heating systems, low-energy houses, active and passive solar systems, local heating systems (total energy units, heat pumps), work place ventilation, economic and juridical problems, computational system simulation.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Air Pollution Control at Work Places (Dittes, Bach)
Luftreinhaltung am Arbeitsplatz
Emission, kinds, spreading and target values of air pollutants, rating of contaminant capture, air flow at capture elements, air flow patterns, air terminal devices, design according to heat and contaminant loads, rating of air flow patterns.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Heat Radiation (Bach, Runge)
Wärmestrahlung
General radiation rules, surface radiation, gas radiation.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
3
--
Examination: oral
Credits: 4,5
Information Package 48
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Introduction to Computational Fluid Dynamics (Laurien)
Einführung in die Numerische Strömungsmechanik see main course „Energy Technologies and Systems“
Heat and Mass Transfer (Hahne or Hasse)
Wärme- und Stoffübertragung see main course „Technologies for Energy Saving“
Fundamentals of Combustion I/II (Maas)
Grundlagen technischer Verbrennungsvorgänge I/II see main course „Combustion and Internal Combustion Engines“
Heat Pumps (Sohns)
Wärmepumpen see main course „Technologies for Energy Saving“
Thermal Power Plants (Stetter)
Thermische Kraftwerke see main course „Thermal Turbomachinery“
Combustion Technology I (Hein)
Verbrennung und Feuerung I see main course „Power Plant and Combustion Technology“
Air Pollution Prevention (Baumbach)
Reinhaltung der Luft see main course „Power Plant and Combustion Technology“
Energy and Society (Hermann)
Energie und Gesellschaft see special announcement
3.8 Energy Technologies and Systems
(Energie- und Anlagentechnik)
Institute of Nuclear Technology and Energy Systems (IKE)
Principles of Energy and System Technology (Groll)
Grundlagen der Energie- und Anlagentechnik
Thermodynamics of energy conversion, thermodynamic cycles; energy transfer, transport and storage; energy needs and usage; energy supply systems; energy, environment, climate; fossil and nuclear fuels; regenerative energies; rational use of energy (principles of pinch technology); costs and economy; energy management; possibilities of future energy supply (fossil and hydrogen energy economy); structure of energy systems, elements of plant technology.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Information Package 49
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Selected Energy Systems I (Bach, Groll)
Ausgewählte Energiesysteme und Anlagen I
Thermal energy supply and cogeneration: heating stations, cogeneration stations, heat pumps, thermal energy transport and distribution, delivery stations. Modern coal upgrading technologies: gasification and liquefaction. Hydrogen technology: generation, transport and storage, usage. Principles of economic calculations.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Selected Energy Systems II (Groll, Bernnat)
Ausgewählte Energiesysteme und Anlagen II
Environmentally benign energy systems and plants: criteria and requirements, safety and risk. Technologies for reduction of emissions. Rational use of energy (thermal energy recovery, waste heat utilisation). CO
2
-poor/ free energy technologies: regenerative energies
(solar-thermal systems), nuclear energy (nuclear fission and fusion, fusion and hybrid reactors, tritium technology); modern coal-fired power plants; technologies and systems for
CO
2
removal.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Nuclear Plants for Energy Production (Lohnert, Bernnat)
Kerntechnische Anlagen zur Energieerzeugung
Fundamentals of controlled nuclear fission, principle design of Pressurised Water Reactors (PWR), Boiling Water Reactors (BWR), heavy water reactors, high temperature reactors and fast reactors; safety principles for prevention of nuclear accidents and discussion of their limits; description of innovative reactor systems.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
4
--
Examination: written
Credits: 6
Basics of Reactor Physics (Lohnert, Bernnat)
Grundlagen der Reaktorphysik
Energy release by nuclear fission, structure of nucleus, cross sections for various nuclear reactions, neutron slowing down and thermalisation, neutron moderators, condition for criticality, neutron diffusion, stationary and instationary chain reaction, kinetics, actinide transmutation, nuclear energy and environment.
Semester: WS Hours per Week: 2
Type: L Prerequisites: --
Examination: oral
Credits: 3
Reactor Safety (Lohnert)
Reaktorsicherheit
Fundamentals of nuclear fission, basic design of reactors. Potential risk of power reactors.
Safety strategies and function of safety technology (active and passive safety) to avoid accidents. Selected examples of safety analyses for Pressurised Water Reactors (PWR)
Information Package 50
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering and Boiling Water Reactors (BWR). Reliability-risk management, fault trees. Possible measures to reduce the failure hazards of future pressurised water reactors for the environment. Detailed presentation of the reactor-catastrophes of Windscale, TMI, Tschernobyl (how could it happen, what did one do to avoid such catastrophes for the future?).
Selected examples of proposed "catastrophe-free" reactors. Final discussion: can mankind handle the responsibility to produce radioactive material?
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Flow with Heat Transfer (Laurien)
Thermofluiddynamik – Theorie und Anwendung
Three-dimensional conservation equations, turbulent heat transfer, channel and pipe flows, natural convection, thermal boundary-layers, two-phase flow (water, vapour), critical heat flux density, analytical and numerical methods.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Introduction to Computational Fluid Dynamics (Laurien)
Einführung in die numerische Strömungsmechanik
Industry software for „Computational Fluid Dynamics“ (CFD), practical exercises on workstations, programming examples in Fortran, finite-difference and finite-volume methods, interactive flow visualisation, turbulence modelling, application on high-performance computer, industrial applications.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
3
--
Examination: oral
Credits: 4,5
Methods for Computational Fluid Dynamics (Laurien)
Numerische Thermofluiddynamik
Basic equations, fundamentals of numerical methods, grid generation, finite differences, finite volumes, finite elements, solution methods for: natural convection, shock-boundarylayer interaction, flow around bodies, internal flow with heat transfer, two-phase flow (water, vapour), programming exercises.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 51
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Energy Storage and Thermal Energy Upgrading (Groll)
Energi espeicherung und Wärmetransformation
Energy Storage: physical principles, design and performance of storage systems. Thermal energy stores (sensible, latent, thermochemical); electrochemical stores (batteries, hydrogen energy storage systems); Marguerre systems, Ruths systems, flywheels, pneumatic storage systems, hydroelectric storage systems.
Upgrading of Thermal Energy: physico-chemical principles of liquid and solid sorption systems; process design; system performance.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
3
--
Simulation of Complex Technical Systems (Schmidt)
Examination: oral
Credits: 4,5
Simulation komplexer technischer Anlagen
Structure of complex systems (energy systems, plants, environmental problems); design and realisation of complex simulation models; data objects and databases; computing, discretisation of functions and operators, numerical solutions of differential equations, integration of complex programme systems; analysis and visualisation of calculated data; exercises: simulation of a simple system using a modular modelling system
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination:
Credits: oral
3
Reactor Theory (Lohnert, Bernnat)
Reaktortheorie
Neutronics (application of transport and diffusion theory, control of nuclear chain reaction, aspects for nuclear design of fuel assemblies); thermohydraulics (heat transfer, calculation of temperature and pressure distribution, thermal limits); long time behaviour (isotopic composition of fuel and structural materials as a function of burn-up and irradiation, operational strategies); load following (changes by load variation, control of power distribution, xenon effects); reactor dynamics (effect of delayed neutrons, feed-back of temperature and pressure on reactivity during normal operation and transients).
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
4
--
Examination: oral
Credits: 6
Optimisation Methods (Bernnat)
Systemtechnik - Optimierungsmethoden
Fundamentals of linear, non linear and dynamical optimisation, simulation, techniques, application for systems in energy engineering.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Information Package 52
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Radiation Protection (Pfister)
Strahlenschutz
A review on radiation exposure with regard to radiation protection in the fields of work, environment and medicine will be given. The physical and biological bases of radiation protection will be presented. The principles of optimisation with the help of organisation, radiation dose measurements and shielding of radiation sources will be discussed. The important regulatory frame work for radiation protection is presented as well as the large domain of radiation dose monitoring needed for protection. Starting from the radiation dose of natural origin including the Radon contribution within houses comparisons are made with occupational and medical dose contributions. Finally the firm knowledge of radiation risk at low and high doses is discussed in detail.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Elements of Radiological Technology in Medicine (Pfister)
Grundlagen der medizinischen Strahlentechnik
For the application of ionising radiation in diagnostic radiology, radiotherapy and nuclear medicine some important fundamentals of radiological physics and radiobiology are presented. In all three fields of radiation application in medicine efficient radiological procedures had been evaluated which have to be introduced and discussed. Therefore, various radiological tools and instruments had been developed which show excellent technical performance as generally needed in medical engineering. Within the radiological technology, good examples of high innovation density can be demonstrated, being a prerequisite of successful industrial production.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Fundamentals and Technology of Fuel Cells (Fischer)
Grundlagen und Technik von Brennstoffzellen
Fundamentals of electrochemical power conversion, technology of electrodes, technology of electrolyte , local systems of fuel cells, fuel cells for traction, problems of economy and safety.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Nuclear Fuel Cycle (N.N.)
Nuklearer Brennstoffzyklus
Nuclear fuel supply: uranium occurrence and reserves, exploitation and refining of uranium ore, uranium conversion and enrichment, fabrication of fuel elements; disposal: reprocessing of irradiated fuel material, conditioning and long-term disposal, uranium and plutonium recycling, costs of the nuclear fuel cycle.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 53
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
System- and Plant Design/ Project Management (N.N.)
System- und Anlagenplanung/ Projektmanagement
Problem definition, requirements related to technical and security aspects, system- and plant design, installation planning and pipes design, construction- and putting into operation planning, project realisation, licensing procedure, project management, project planning and control, engineering, supply and fabrication, mounting, function test commencement of operations, plant integration, classification- and labelling systems, quality control and documentation.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Heating, Ventilating and Air-Conditioning Systems (Bach)
HLK-Anlagen see main course „Energy Systems for Technical Building Appliances“
Automatic Control of Power Plants (Welfonder)
Kraftwerksautomatisierung see main course „Power Plant and Combustion Technology“
Industrial Medicine and Safety Technology (Schultheiß, Link, Pfister)
Arbeitsmedizin und Sicherheitstechnik see main course „Environmental Protection Engineering and Safety Technology“
Energy and Developing Countries (Grawe)
Energie und Dritte Welt see main course „Energy Systems“
3.9 Industrial Management
(Fabrikbetrieb)
Institute of Industrial Manufacturing and Management (IFF)
Industrial Mana gement I/II (Westkämper)
Fabrikbetriebslehre I/II
It is a prerequisite of any industrial production to know what kind of internal relations exist in a company (organisation - technology - finances) and between companies and their surrounding (procurement - marketing).
In its first part, the lecture exemplifies types of organisation (company structure, structure of work flow, management style) as well as different forms of business organisation and business mergers. Furthermore, a survey is given of production and its adjoining departments (ahead, after or parallel ones), e.g. production design, operation and process planning, testing, procurement, marketing).
The second part views cost accounting, efficiency calculation and capital investment planning. Apart from that, basic matters of factory planning are discussed.
Information Package 54
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
The practical courses deal with selected chapters of the lecture, applying activity-based teaching methods.
Topics of part I of the course are: value analysis, working programmes, production control, quality assurance, inventory and order accounting, determination of demand. Topics of part II of the course belong to the field of cost accounting and economic efficiency calculation.
Semester:
Type:
SS
L
Hours per Week: 2
Prerequisites: --
Examination: written
Credits: 3
Automation in Operation and Assembly Technology (Schraft)
Automatisierung in Montage- und Handhabungstechnik
This course gives a survey of possible applications and limits of automation within operation and assembly technology. It starts with single operating functions and leads to tool technology to interlink different means of production and for automatic assembly. Function and build-up of handling gear and assembly equipment as well as of industrial robots are being explained and limits to their operative range are discussed.
In relation to the basic terms of automation technology the necessity of automation in various fields of production will be demonstrated. The lecture analyses technical conditions of automation and its effects on men. It examines tasks and means to automate the flow of technical information starting at the level of product design up to the level of machine control. Special conditions and difficulties with the automation of various production processes are being exemplified, focussing on commercial aspects of automation projects.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Factory Planning I (Bischoff)
Methoden der Fabrikplanung I
Planning a factory does not only demand a profound knowledge about the design of work stations and material flow, about technical and information-related processes, but it also requires a suitable instrument to handle the "planning" in a target-oriented and consistent way. Factory planning is a problem definition from which a multitude of single tasks derives which are to be analysed and coordinated in accordance with the targets established by the company. The focus of the lecture is both on the technical solution of these single tasks and on the coordination of operations. The occurring problems are being exemplified by a case study.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Quality Assurance (Schloske)
Methoden der Qualitätssicherung
Quality assurance and management must be applied in modern manufacturing companies in a systematic way, from market analysis to procurement, development and production to the employment by the customer. Several methods exist, e.g. Quality Function Deployment (QFD), Failure Mode and Effect Analysis (FMEA), Kaizen, Statistic Process Control
Information Package 55
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
(SPC) etc. They are used to regulate and optimise operational procedures. The lecture presents necessary methods and describes examples from actual practice in industry.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Production Planning and Control I/II (Mussbach-Winter)
Produktionsplanung und
–steuerung I/II
Problems resulting from design and operation of production planning and control systems are portrayed and suitable methods and means of organisation given for their solution, illustrated by several practical examples. Focussing on "problems" the following operational functions are dealt with: structuring of material bills and work schedules, procedures and methods of production planning and control, internal numbering, work sheets. Subjects with focus on "organisation" are: operational information and communication technology, conventional means of organisation, computer systems. Focussing on "methods" aspects of media conversion, hardware- and software selection and economic efficiency are discussed.
Semester:
Type:
WS
L
Hours per Week: 2
Prerequisites: --
Examination: oral
Credits: 3
Metrology and Inspection (Rauh)
Meß- und Prüftechnik
The aim of metrology and inspection in the production process is the collection and evaluation of information about the quality of products and processes. Due to the high expectations in product quality, metrology and inspection have to follow the complete product development. The expression „metrology“ does not only mean technical methods to collect measurement data, but also contains organisational and management aspects that are related to the production.
Semester:
Type:
SS
L
Hours per Week: 2
Prerequisites: --
Factory Planning II (Stender)
Methoden der Fabrikplanung II
Examination: written
Credits: 3
Material flow is considered as a unit, in regard to public traffic network as well as to single work stations. At the beginning, the location needs to be chosen, then the long-term planning of a company require, for example, a master plan for house building. The determination of production facilities within single operation areas makes it possible to calculate the necessary building volume. After defining the material flow you can join together various areas to an optimum lay-out, using methods of operation research. Case studies will emphasise this focus.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 56
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Sur face Technology (Roßwag, Ondratschek)
Oberflächentechnik in der Fertigung
Surface technology is concerned with procedures and installations to improve or create functional and decorative surface properties. Main topics are lacquering, electroplating, mechanical and chemical removing processes and aspects of corrosion and environmental protection.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Organisation and Technology of Recycling (Steinhilper)
Organisation und Technik der Kreislaufwirtschaft
The lecture deals with foundations and terminology of recycling (types of cycles, processes, kinds of recycling), legal regulations and directives, recycling and disposal concepts, recycling logistics, disassembling, isolating and separating techniques, recycling and reutilization cycles, life-cycle-engineering, recycling-oriented product design and accompanying measures (ecological auditing, balancing and marketing).
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Quality Assurance in Production (Schloske)
Qualitätssicherung in der Fertigung
Satisfying customer requirements in the areas of product features and services provided, is a decisive factor in competitive success. A change in thinking has taken place in fault recognition where the orientation is towards preventive measures to avoid faults in the manufacture of products. The tasks of quality management are defined within the framework of this background, where all departments and employees, from marketing to customer service, must play their part in system-oriented quality management. The various quality assurance tasks and processes are dealt with, particularly quality planning and guidance. The quality strategies are verified by examples and experiences from actual practice in industry. The actions necessary to adapt the organisation according to its operational extent, to produce optimum effect of the measures, are indicated and the quality costs which act as a standard for measuring the effectiveness of the quality assurance activities, are clarified.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 57
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Strategies in Production (Westkämper)
Strategien der Produktion
This lecture gives a good overview of modern initial stages for optimising structures of production by technical and organisational concepts. Special attention is given to: technology calendars, early warning systems, lean manufacturing, continuous improvement, fractals, autonomic production systems, productions able to learn, production networks.
Methodical basis is system technology, non-linear dynamics and others.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Seminar on Manufacturing Engineering (Kraus)
Fertigungstechnisches Seminar
This short lecture deals with the basics of rhetoric and with presentation techniques, i.e. systematic, methods and instruments for the preparation and realisation of presentations, basics of constructive communication, conversation style, visual contact etc.
Semester:
Type:
WS/SS
S
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Basics of Materials-handling Technology (Wehking)
Grundlagen der Fördertechnik see main course "Mechanical Handling "
Mathematical Methods of Production Planning (Lentes)
Mathematische Methoden der Produktionsplanung see main course "Technology Management"
Personnel Management (Bullinger, Gidion)
Personalwirtschaft see main course "Technology Management"
Project Management and Simultaneous Engineering (Bullinger, Warschat)
Projektmanagement und Simultaneous Engineering see main course "Technology Management"
3.10 Precision Mechanics and Microtechniques
(Fein- und Mikrotechnik)
Institute of Time Measurement Engineering, Precision- and Micro-Engineering
(IZFM)
Basics of Microtechniques I/II (Kück)
Grundlagen der Mikrotechnik I/II
Part I: introduction to micromechanics, special materials and their structure, theory of elasticity of anisotropic bodies, conversion principles in micromechanics, micro transport
Information Package 58
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering mechanisms, vacuum technology, principles of structuring, selected simulation techniques, aspects of microsystems.
Part II : clean room techniques, sawing and polishing technology, machines for mask and structuring technology, vaporising and coating, vacuum technology, fabrication of quartz and silicon components, connecting technology, examples for micromechanical components.
Semester:
Type:
WS/SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Miniature Technology I (Basics and Principles) (Kück)
Miniaturtechnik I (Grundlagen und Prinzipien)
Materials of miniature technology, electrical and mechanical energy sources and storage, guiding elements, gearing, magnet technology, miniature driving elements, oscillators, oscillation systems, miniature clutches, electrical and mechanical displays, damping devices, tolerances.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Miniature Technology II (Components and Equipment) (Kück, Müller)
Miniaturtechnik II (Bauelemente und Geräte)
Production methods for smallest dimensions, sensors for electrical, mechanical and optical parameters, examples for applied miniature technology, i.e. on board equipment, testing equipment for quantities, clocks, photo and video apparatus.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Selected Measuring Techniques of Precision and Micro Engineering (Martin)
Ausgewählte Messverfahren der Fein- und Mikrotechnik
Analysis of surfaces (Auger spectroscopy, mass spectrometer for secondary ions, SEM), characterising methods for coatings, laser doppler anemometer, X-ray diffractometry, modal analysis, analysis of emissions in acoustics.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Electronics for Engineers in Precision Engineering (Effenberger)
Elektronik für Feinwerktechniker
Analogue and digital basic circuits: diodes, transistors, tyristors, photoelectric, temperature and magnetic field dependent components; sensors; application examples for integrated circuits (i.e. operational amplifiers, A/D converters, logical circuits, memories) in bipolar and MOS technology, introduction in micro computers.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 59
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Electronic Components in Precision Engineering (Effenberger)
Elektrische Bauelemente in der Feinwerktechnik
Meaning of electronics for precision engineering; semiconductor devices (discrete and integrated, analogous and digital components, sensors, converters), diodes, transistors, tyristors, triacs, photo elements, photo diodes, luminescence diodes, opto couplers, temperature depending elements, microprocessor techniques.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Applications of Micromechanics (Schmidt)
Anwendungen der Mikromechanik
Introduction; conversion principles and scaling methods, construction and working of micro-mechanical sensors; actuators and other devices; applications of surface micromechanics.
Semester:
Type:
WS/SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Time Measurement Techniques (Kück, Müller)
Zeitmesstechnik
Physical and technical methods for long-term, short-term and ultrashort time measuring; clock and watch techniques.
Semester:
Type:
WS/SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Devices for Microsystems (Sandmaier)
Bauelemente der Mikrosystemtechnik
Physical basics and effects; mechanical function elements; optical components, sensors, actuators, microsystems.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Special Technologies in Microsystems (Sandmaier)
Spezielle Technologien der Mikrosystemtechnik
Plasma and laser supported processes, double sided lithography, thin film technology; surface micromechanics; LIGA, layout methods.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 60
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Optical Measurement Technique and Measuring Procedure (Tiziani)
Optische Meßtechnik und Meßverfahren see main course „Technical Optics“
Biomedical Engineering I (Nagel)
Biomedizinische Technik I see main course „Biomedical Engineering“
Laser Processes in Fine Mechanics (Hügel, Dausinger)
Laserverfahren für Feinwerktechnik see main course „Laser Material Processing“
3.11 Precision Engineering
(Feinwerktechnik)
Institute of Design and Production in Precision Engineering (IKFF)
Basics in Precision Engineering; Design and Manufacturing
(Schinköthe, Lindenmüller)
Grundlagen der Feinwerktechnik; Konstruktion und Fertigung
The lecture deals with the basic knowledge necessary for developing and designing precision engineering systems and devices. Particular emphasis is put on relations between product design and production technology. Priorities are set up by the following topics: methods for developing devices, introduction into methodical approaches to find creative solutions, precision and fault behaviour of devices, requirements and design of precision machines, tolerance, tolerance accumulation and tolerance analysis, reliability and safety of devices (design criterions for building up reliable and safe devices), interactions of devices with their environment, vibration damping and noise reduction in precision engineering, plastics technology in precision engineering (materials, processes, part and mould design), trends and new developments, e.g. application of rapid prototyping technologies, the selected subjects are discussed more deeply by studying particular examples within the related seminars and the laboratory work.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Actuators in Precision Engineering - Design, Dimensioning and Applications
(Schinköthe, Beisse)
Aktorik in der Feinwerktechnik
– Konstruktion, Berechnung und Anwendung
Subjects of this lecture are selected aspects for developing and designing precision engineering systems. Mainly, actuating and driving systems applying different physical principles are presented: magnets and magnet technology (materials, processes, dimensioning and magnetisation), electromagnetic actuators (design, dimensioning and applications of rotatory and linear stepping motors), electrodynamic actuators (design, dimensioning and applications of rotatory and linear small-size dc-motors), piezoelectric and magnetostrictive actuators (materials, dimensioning, design and applications), examples for the realisa-
Information Package 61
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering tion of driving units in precision engineering devices, the selected subjects are discussed more deeply by studying particular examples within the related seminars and the laboratory work.
Semester:
Type:
WS/SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
Electronic Components in Precision Engineering (Effenberger)
Elektrische Bauelemente in der Feinwerktechnik see main course „Precision Mechanics and Microtechniques“
Electronics for Engineers in Precision Engineering (Effenberger)
Elektronik für Feinwerktechniker see main course „Precision Mechanics and Microtechniques“
Basics of Microtechniques I/II (Kück)
Grundlagen der Mikrotechnik I/II see main course „Precision Mechanics and Microtechniques“
Devices for Microsystems (Sandmaier)
Bauelemente der Mikrosystemtechnik see main course „Precision Mechanics and Microtechniques“
Applications of Micromechanics (Schmidt)
Anwendungen der Mikromechanik see main course „Precision Mechanics and Microtechniques“
Fundamental Laws of Optics (Tiziani)
Optische Grundgesetze see main course „Technical Optics“
Mechanical Design Engineering I/II (Seeger)
Technisches Design I/II see main course „Design Technology“
Manufacturing of Electronic Systems (Höfflinger)
Fertigung elektronischer Systeme see main course „Electronics Manufacturing“
Laser Processes in Fine Mechanics (Dausinger)
Laserverfahren für die Feinwerktechnik see main course „Laser Material Processing“
Application of Closed-loop Control in Production Facilities (Pritschow)
Angewandte Regelungstechnik in Produktionsanlagen see main course „Control Technology“
Information Package 62
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Vehicle Electronics (external lecturer)
Elektronik im Kraftfahrzeug see main course „Vehicle Engineering“
Introduction into German and European Patent Law (Dreiss)
Einführung in deutsches und europäisches Patentrecht see special announcement
3.12 Manufacturing Technology of Ceramic Components, Composites and
Surfaces
(Fertigungstechnologie keramischer Bauteile, Verbundwerkstoffe und
Ober flächentechnik)
Institute of Manufacturing Technologies of Ceramic Components and
Composites (IFKB)
Manufacturing Technologies of Ceramic Components (Gadow)
Fertigungstechnik keramischer Bauteile
Raw materials and additives, mass processing, spray and structure granulation, characterisation of preproducts and solid/ liquid suspensions, original forming methods, casting, injection moulding, extrusion, tape casting, cold isostatic pressing (CIP), green machining, sintering and heat treatment technology, hot isostatic pressing (HIP) and gas pressure sintering, industrial kiln technology, materials flow and handling systems, process and assembly technology, finishing of hard materials, thermophysical properties, metrology, surface characterisation and coatings, quality assurance systems.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Inorganic Composites (Gadow)
Anorganische Faserverbundwerkstoffe
Characterisation of fibres for reinforced materials, metallic and ceramic matrix materials, production and chemical technologies; structure mechanics; coatings; interface systems and adhesion, mechanical, textile and thermochemical manufacturing technologies, component construction and design, testing and characterisation, jointing and bonding technologies, cutting and other mechanical machining technologies.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
High Energy Surface Technologies (Gadow)
Hochenergetische Verfahren der Oberflächentechnik
Coatings and composite materials, metals, cermets, ceramics, metalisation by thermal spraying; plasma spray coating of ceramics, hard materials and specific alloys, high velocity oxygen fuel spray coating (HVOF), controlling technology and process automatisation; manipulators, handling systems, industrial robots und multiaxial systems, coating and
Information Package 63
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering component characterisation, vacuum technologies, physical vapour deposition (PVD) and chemical vapour deposition (CVD); wear and corrosion protective coatings for high temperature applications, diffusion coatings; process technologies of heterogeneous chemical reactions; local micro analysis (WDX, SEM, TEM, etc.), measurement of hardness and roughness, tribological properties and applications; 3D precision metrology.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Control Technology for Machine Tools and Industrial Robots (Pritschow)
Steuerungstechnik der Werkzeugmaschinen und Industrieroboter see main course „Control Technology“
CAD/CAM Applications (Heisel)
CAD/CAM-Anwendungen see main course „Machine Tools“
Fundamentals of HighPower Lasers (Laser Technology I) (Hügel)
Grundlagen der Hochleistungslaser (Lasertechnologie I) see main course „Laser Material Processing“
Material Processing by HighPower Lasers (Laser Technology II) (Hügel)
Materialbearbeitung mit Hochleistungslasern (Lasertechnologie II) see main course „Laser Material Processing“
Forming Technology I/II (Siegert)
Umformtechnik I/II see main cours e „Metal Forming Technologies“
Fundamentals of Mechanical Process Engineering (Piesche)
Grundlagen der Mechanischen Verfahrenstechnik see main course „Mechanical Process Engineering“
Design Principles for Extrusion Dies and Injection Moulds (Fritz)
Auslegung von Extrusions- und Spritzwerkzeugen see main course „Polymer Technology“
Basics in Precision Engineering; Design and Manufacturing (Schinköthe)
Grundlagen der Feinwerktechnik, Konstruktion und Fertigung see main course „Precision Engineering“
Metal Cutting (Rothmund)
Zerspanungslehre see main course „Metal Forming Technologies“
Information Package 64
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Materials Science (Schmauder)
Werkstofftechnik see main course „Materials Testing, Materials Science and Strength of Materials“
Design with Ceramics I/II (Kochendörfer)
Konstruktion mit Keramik I/II see special announcement
3.13 Mechanical Handling
(Fördertechnik)
Institute of Materials-handling Technology (IFT)
Basics of Materials-handling Technology (Wehking)
Grundlagen der Fördertechnik
Classification and systematic of materials-handling technology. Elements of materialshandling technology: ropes and rope drives, chains and chain drives, brakes, brake lifting devices and ratchet gears, rail wheels/ guide rails, hoisting appliances for bulk materials, means for fixing and handling of goods (e.g. hooks, hoisting belts, etc.), clutches, gears, drives with combustion engines, electrical drives (AC- and DC-asynchronous motors, frequency converters), hydrostatic drives, continuous conveyors (belt and chain conveyors, bucket conveyors, hanging conveyors, oscillating conveyors, feed and lifting screws, driven gravity roller tables, gravitation and flow conveyors), discontinuous conveyors [industrial trucks, tractors, lift trucks, straddle carriers, storage machines, mounted discontinuous conveyors (e.g. lifts), discontinuous overhead conveyors (e.g. cranes)], storage technology
(classification by construction and storage goods, static and dynamic storage).
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Elements of Material-handling Machines (Wehking)
Bauteile von Fördermitteln
Rope drives: wire ropes, shesses, endurance, discarding criteria, standards for rope calculation. Rope terminations, rope connections. Sheaves, drums, tractionsheaves, rope drive efficiency. Chains, chain drives, lifting appliances, load suspending devices, lifting hooks, grab dredger, load magnets, brakes, brake constructions, necessary brake moment, rollers and guide rails, roller pressing.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Supporting Structure and Power Units (Roos)
Tragwerke und Triebwerke
Supporting Structures: determination of forces in frameworks, girderwebs, bridge girders, standing ropes.
Information Package 65
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Power Units: roadways for track-bound conveyors, design of power units to working time, design of winches.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Basics of Logistics (Roos)
Grundlagen der Logistik
Introduction into logistics: terms, problems, targets. Load units: definition, building of load units. Systems of logistics for supply and disposal. System analysis, model structure, models of function, decision, and analogy, logistic enterprises. Operations research: differential calculus, queuing problems, linear planning calculus, heuristic methods, simulation.
Semester:
Type:
SS
L
Hours per Week: 2
Prerequisites: --
Examination: oral
Credits: 3
Materials-handling Technology for the Disposal of Waste (Wehking)
Fördertechnik für die Entsorgung
Elements of materials-handling technology within processes of collecting, transporting, handling, storing and treating waste: collecting systems; transporting, conveying and handling systems: vehicles for the lifting and tipping, interchangeable and single-way systems; storage and treatment of wastes: dump technology, interim storage of toxic waste, storage of valuable substances, mechanical treatment (comminution, sorting, compacting), biological utilisation; sorting of toxic waste; types of waste/ amounts of waste; general legal conditions.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Passenger Transportation Technology (Vogel)
Personen-
Fördertechnik
Elevators, lifts, escalators, passenger conveyors; mine lifts, railway aerial rope ways. Dimensioning, comparison of elements and drives, dynamic problems, control, traffic problems, brakes, safety gears buffers.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Introduction of Safety Technology (Wehking)
Grundlagen der Sicherheitstechnik
Standards and rules, functions of reliability, investigation of distributions, statistics, safety criteria, mutual risk of man - machine - environment, redundancy, failure probability, diversity, safety analysis.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 66
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Warehouse and Consignment-Technology (Roos)
Lager- und Kommissioniertechnik
Introduction, design of storage/retrieval shelves, operating systems for s/r shelves, construction of s/r systems, performance determination, consignment-systems, principals for the design of consignment, examples.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Logistics of Chains of Process (Roos)
Logistik der Prozeßketten
(shown at the example of planning, construction, and operation of the facilities of the flow of materials); network of construction, mechanical engineering, technology of control as a technical-economical process of optimisation; throughput determination, basic technology of machines (parts and their availability); connection of machines (mechanical and informational joining conditions, safety and availability); structure of machine systems (construction guidance with wheel and rail: stress in the base dimensioning running wheels).
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Intersections of Logistics Systems (Roos)
Schnittstellen von Logistiksystemen
(shown on the examples of terminals, transition, and loading facilities); definition; model of loading station with necessary components (organisation, transition facilities, warehouses with operating systems); terminal concepts for persons and materials; technical realisation
(e.g. container terminal); gate-management of a terminal; models for optimising and regulations for automation, guarantee of a determined availability.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Technology of Machines for Transportation (Roos)
Maschinentechnik der Verkehrsträger
Meaning and causes of traffic (human- and material transport), technical basics about technology of vehicles and demands on the infrastructure for material transport (land-, water-, aircraft), performance of transport and its costs, traffic prognosis and methods for solving future tasks, summary and outlook.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Building Machinery I (Messerschmidt)
Baumaschinen I
View of earthmoving equipment: rope operated and hydraulic excavators; bulldozers, loaders, scrapers, road graders dumptrucks. Components of hydraulic excavators: digging
Information Package 67
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering forces, hydraulic equipment, crawler, stability, stessanalysis of steel structure. Wheel loaders: articulated frame steering, stability.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Building Machinery II (Gelies)
Baumaschinen II
Equipment for the production, handling and compaction of concrete. Concrete transport, concrete and motor conveying, concrete and mortar pumps, rendering machines.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Practice of Engineering Activities (Wehking)
Praxis der Ingenieurtätigkeit
This event, which is not relevant for the examination, represents a combination of lecture, exercise and seminar. Goal: show future engineers already during their studies what kind of demands and challenges they have to face in their career. Contents: planning of versions and tendering by means of project examples, taking the minutes of a conference, calculation of costs and economy, project management, techniques of presentation.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: certificate
Credits: 3
Simulation Engineering (Zeitz)
Simulationstechnik see main course „Control Engineering“
Strength of Materials (E. Roos)
Festigkeitslehre I see main course „Materials Testing, Materials Science and Strength of Materials“
Multiphase Flow (Piesche)
Mehrphasenströmungen see main course „Mechanical Process Engineering“
Control Technology I (Pritschow)
Steuerungstechnik I see main course „Control Technology“
Practice of Systematic Design (Langenbeck)
Praxis des systematischen Konstruierens see main course „Design Technology“
Information Package 68
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
3.14 Applied Computer Science
(Angewandte Informatik)
Application of Computer Science in Mechanical Engineering (AIM)
Applied Computer Scie nce (Rühle)
Angewandte Informatik
The design and analysis of complex technical systems in engineering requires nowadays a steadily increasing employment of digital computers along with the appropriate software and numerical techniques. The aim of the main course Applied Computer Science is to enable beginners in engineering to efficiently coupling the above tools in solving professional problems.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Design of Sof tware Systems (Rühle)
Entwurf von Softwaresystemen
Software Engineering: software, life-cycle, design, modular techniques, shell structure of software design, pseudocode, tools. Interfaces: abstract data types, scientific technical data bases. Components of an open modular system, object-oriented techniques.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Simulation of Scientific and Technological Systems on High-Performance
Comput ers (Rühle)
Simulation wissenschaftlichtechnischer Systeme von Höchstleistungsrechnern
Computation, computer simulation, computer architectures: vector and parallel computers.
Workstations, server; distributed computing, computer networks, visualisation, data base systems and technologies, software.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Numeric of Partial Differential Equations (Schmidt)
Numerik partieller Differentialgleichungen
This course is an experimental course. Numerical experiments are part of all lectures and will be performed during the lectures to improve the insight into complex numerical behaviour. Basic numerical methods for discretisation and operation on discretisised quantities; introduction to matrix theory and sparse matrix systems (equation solvers); partial differential equations: basic properties and solution strategies, finite difference methods and finite element methods for elliptical equations; time discretisation in parabolic equations; integration strategies for hyperbolic equations, systems of partial differential equations (Euler equations); error propagation in numerical systems for the solution of partial
Information Package 69
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering differential equations. Practical course: solution of the transient, 2-d-heat transfer problem including discretisation, equation solving and stability investigations.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Simulation of Complex Technical Systems (Schmidt)
Simulation komplexer technischer Anlagen
Structure of complex technical systems like plants, energy systems or environmental monitoring systems; modelling design and implementation of simulation models representing complex systems; object oriented techniques for modelling, analysis, design and implementation on the basis of the Unified Modelling Language (UML) and C++ and JAVA; functional modelling on the basis of ordinary differential equations; numerical methods for finite computer systems: discretisation of function and operations, error propagation in modular systems; integration of data and functional objects into simulation systems: frameworks, patterns, client-server architecture, common object broker architecture; quality assurance in complex simulation systems: ISO 9000, V model for software engineering.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Methods of Computer Aided Engineering in Modern Development Processes
(Schelkle)
Computerunterstützte Simulationsmethoden (MCAE) im modernen Entwicklungs- prozeß
This lecture provides an overview of computer aided simulation techniques which are used in the framework of modern development processes. The main items describe techniques used in the frame of rigid body and structure mechanics investigations e.g. Finite Element
Methods (FEM), Boundary Element Methods (BEM) and Multibody Systems (MBS).
Thereby industrial standard applications are presented as well as research restricted cases. They should show the necessity, the miscellaneous opportunities of application, the integration into the product development process and the economic relevancy of these kinds of simulation.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Numerical Methods for Supercomputers (Küster)
Numerisc he Methoden für Höchstleistungsrechner
Computer architectures; efficient data structures. Mathematical fundamentals. Algorithms for solving linear equation systems: direct solvers, Jakobi, Gauss-Seidel, SOR, ADI, PCG,
Multigrid, hierarchical elements, BPX. Discretisation of partial differential equations: FD,
FV, FEM. Parallel computers and parallel algorithms.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 70
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Scientific Visualisation (Lang)
Visualisierung wissenschaftlich-technischer Daten
Basic elements of computer graphics, visual perception, visualisation process (filter, mapper, renderer), reference model of visualisation (physical and computational domain, dependent values, geometric representation, time dependency), example visualisation (volume data, fluid flow visualisation, etc.). Visualisation software systems (requirements, components of a system, problem description methods, data management and exchange, working methods), further developments.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Architecture of Parallel Computers and their Application (Geiger)
Parallelrechner – Architektur und Anwendung
Parallel computers - why? Parallelism - the user's view; structural elements of parallel computers; architectures of parallel computers; parallel programming-models; operatingsystems for parallel computers; evaluation and optimisation; parallelisation -strategies for perfectly parallel problems; parallelisation strategies for problems with short-range interaction (PDEs); parallelisation strategies for problems with long-range interaction (PIC); loadbalancing.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Usage and Programming of Microprocessors (Haas)
Einsatz und Programmierung von Mikroprozessoren
This lecture provides an overview of the architecture and the implementation of microprocessors which are suitable for steering and controlling applications. The hardware description starts with a decomposition of the compute kernel into independent operational modules; the functioning of the compute kernel is described by a standardised arithmetic registry transfer language. Additional modules which are necessary for the composition of microprocessor systems are explained by examples. The programming is based on a standardised operating system which contains real-time facilities. The internal structure of the operating system kernel, the organisation of the filesystem and the programming and process environment are made clear by several graphical and procedural descriptions and by some simple C-programming examples.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 71
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
3.15 Design Technology
(Konstruktionstechnik)
Institute of Machine and Gearing Design (IMK)
Reliability Engineering I/II (Bertsche)
Zuverlässigkeitstechnik I/II
Importance and classification of reliability engineering - overview of methods and devices - quality methods for systematic investigation of faults and failures, for example FMEA (with practice), fault tree analysis, design review - basics of quantitative methods for calculation of reliability and availability, for example boole model (with practice), markov theory, monte carlo simulation - evaluation of lifetime data (for example with the Weibull distribution) - reliability test planing - programmes to secure reliability.
Semester:
Type:
WS/SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 4,5/1,5
Practice of Systematic Design (Binz)
Praxis des systematischen Konstruierens I/II
Scope of design, necessity of design methodology, systematic design, design methods, basic of technical systems, basics of the methodical approach, the process of planning and designing, general problem solving process, work flow of planning and design process, general methods for searching solutions, methods for selecting and evaluating, methods for product planning and clarification of the task, methods for conceptual design, steps of conceptual design, abstracting to identify the essential problems, formation of function structures, developing of effect structures, developing of concepts, examples of conceptional design, steps of embodiment design, checklist for embodiment design, basic rules of embodiment design, principles of embodiment design, guidelines of embodiment design, evaluating embodiment designs, methods for detail design, steps of detail design, preparation of production documents, characterising of objects, well proved components, developing size ranges and modular products, methods for quality assurance within the design process, methods for design to cost.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
4
--
Examination: written
Credits: 6
Design of Vehicle Transmissions (Lechner)
Konstruktion der Fahrzeuggetriebe
Interaction of combustion engine and transmission, systematic of vehicle transmissions, selection criteria, economy of transmissions and vehicles, development sequence, power profile of passenger cars and commercial vehicle transmissions, design methods of vehicle transmissions: specification, deduce of design tasks, functional analysis, methodical and intuitive solution of tasks, selection of the suggested solutions by evaluation, service life calculation, load profiles, design of critical elements: gear wheels, torque converter, shafts, synchronisers, clutches, gear shift linkage. Pneumatic and electronic transmission control. Typical damages and faulty design, reliability and failure probability of production gear boxes. Technical documentation and parts list organisation. Design examples: pas-
Information Package 72
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering senger car transmissions, commercial vehicle transmissions, automatic transmissions for passenger cars and commercial vehicles. Aircraft gearboxes, development trends.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Science of Mechanisms (Lechner)
Getriebelehre
General view over uniform and nonuniform velocity-ratio mechanisms, spatial and plane designs of multi-bar linkages. Graphical and analytical determination of velocity and acceleration on plane moved mechanism linkages. Relative motions of multilink systems.
Analysis of curvature of curved paths, curvature relationship. Instant centre of velocity and acceleration, path of instant centre, turning and tangential circle of motioned planes. Moving rule of crank mechanisms. Plane and spatial cam mechanisms, systematic of four-bar linkages, designs of four-bar mechanisms.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Fluid Sealing Technology (Haas)
Dichtungstechnik
Based on the universal importance of the sealing technology for technical systems, the basics of the sealing technology are illustrated, the realisation of sealing systems is described and the plurality of applications is demonstrated.
In detail: requirements, functions, structural elements, formation and stabilisation of sealing gaps. Friction, wear, leakage, design, application and computation base of essential sealing elements: axial flow through circular gaps, packing, hydraulic seals for pistons and rods, rotary shaft seals, mechanical face seals, screw form seals, liquid barrier seals, bellows and diaphragms, labyrinth seals, sealing for gas.
Semester:
Type:
SS/WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Industrial Design Engineering Lecture I - IV (Seeger)
Technisches Design I - IV
Lecture I: Industrial Design Engineering is presented as a technical product's part of value. Based on examples, the main parameters are dealt with comprehensively.
Lecture II: Industrial Design Engineering is presented as a construction method's part.
Application of the design criteria on the functionality and usability of single products and product programmes.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
4
--
Examination: written
Credits: 6
Information Package 73
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Lecture III: Continuation of Lecture II applied on a product's structure and cover.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Lecture IV: The industrial design engineering deals with the phase of conception and construction, focused on shape, texture, colour and graphics.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2 Examination: oral
Credits: 3
Friction Bearings (Dillenkofer)
Gleitlager und Gleitlagerungen
Basic hydrodynamic theory, radial collar bearings, radial tilting pad bearings, bearings with fixed and moving tilting pads, dynamically loaded journal bearings, calculation of journal bearings, field of operation, heat development and temperature, limitations to application, oil supply, bearing materials, design requirements and influence of arrangement, lubricants, supply with lubricant, bearing damages, design of journal bearings, vibration properties of rotors with friction bearings.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Application of FEM for Mechanical Engineering with Practical Training (Dillenkofer)
Anwendung der Methode der Finiten Elemente im Maschinenbau mit Praktikum
Use of FEM for structural analysis and fluid flow analysis, competing methods, finite difference method, boundary element method, systems at work, solid modelling, mesh generation (pre-processing), calculation, visualisation of results (post-processing).
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
1+2
--
Examination:
Credits: oral
4,5
Computer Aided Design I/II (Engel)
Rechnerunterstütztes Konstruieren I/II
Part I: architecture and principles of operation of CA-systems: hardware and software architecture, graphic standards and graphic subsystems, display of graphical data, graphical user interfaces (GUI, logical and physical input devices, types of modelling systems (wire, surface and solid modelling), geometry and topology, parametric and feature-based design, working concepts.
Part II: integration of CA-systems into the product development and manufacturing environment: data exchange standards (IGES, STEP, VDA), procedural interfaces, test and certification methodologies, data transfer and data processing in CAE- and CAM-systems, rapid prototyping methods, product data management systems, photo-realistic rendering, economic considerations.
Semester:
Type:
SS/WS
L + E
Hours per Week:
Prerequisites:
1/1+1
--
Examination: oral
Credits: 4,5
Information Package 74
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Value-Engineering and Design to Cost (Krehl)
Wertanalyse und Design to Cost
Methodology of a systems approach to product of optimisation - value analysis. Analysis of the functions required and demanded in the market. Value and cost of each function.
Work in an interdisciplinary team. Project organisation: requirements, management role.
Practical application examples.
Semester:
Type:
SS
L
Hours per Week: 2
Prerequisites: --
Examination: oral
Credits: 3
Ball and Roller Bearings (Zwirlein)
Wälzlagertechnik
Basics of rolling bearing engineering: geometry, kinematics, load carrying capacity, fatigue theory, service life, friction, lubrication.
Principals of bearing design and design of bearing locations. Planning and realisation of projects taking into consideration the technical and economic conditions incl. assessment of the residual risk. Market analyses and definition of a product programme, procedure and conclusions of damage analyses.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
3.16 Vehicle Engineering
(Kraftfahrzeuge)
Institute of Internal Combustion Engines and Automotive Engineering(IVK)
Motor Vehicles I/II (Wiedemann, Liedl, Maulick)
Kraftfahrzeuge I/II
Traffic economy data, development of statistics of road traffic accidents. Trends for energy consumption, pollutant and noise emission of road traffic. Periods in the development of passenger cars. To derive vehicle performance and tractive-power diagrams engine characteristic curves are discussed. Vehicle performance is the result of the incorporation of the tractive resistances. Discussion of fuel consumption. Discussion of driving safety considering the limit of driving stability confined by the frictional forces. Discussion of important components and assembly groups of motor vehicles, especially clutch, gearbox, final drive, drive shaft, wheel and tyre, steering system, brakes, suspension and wheel suspension. Special attention is dedicated to environmental protection, consumption reduction and safety.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Information Package 75
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Motor Vehicle Handling Characteristics I (Haken, Wiedemann)
Fahreigenschaften des Kraftfahrzeugs I
Introduction, tyre characteristics, lateral vehicle dynamics (vehicle handling), vertical movement of vehicles (suspension behaviour), demonstration of handling characteristics in practice.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Aerodynamics of Vehicles I and II a, II b (Wiedemann, Potthoff, Künstner)
Kraftfahrzeug-Aerodynamik I und II a, II b
Wind tunnel measuring technique, forces and moments caused by the air flow, influences of the body shape, forming of the body platform, cooling-air flow, air-flow boundary conditions, simulation of the running path, ventilation and air extraction, engine cooling, brake cooling, wipers.
Part I:
Semester:
Type:
Part II a:
SS
L
Hours per Week: 1
Prerequisites: --
Examination: oral
Credits: 1,5
Semester:
Type:
Part II b:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Motor Vehicles III (Wiedemann, Haken)
Kraftfahrzeuge III
Design of wheel suspensions, automatic/continuously variable transmissions, multiplecircuit brake, pneumatic brake, permanent brake, antilock system, pneumatic and hydropneumatic suspension, servo steering, short summary about vehicle electronics.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Test and Measuring Technique for Motor Vehicles I (N.N.)
Kraftfahrzeug-Versuchs- und Meßtechnik I
Vehicle testing work in research and development and affiliated special measuring technique, noise investigations, collective of load application, flywheel mass test rig, signal analysis and modal analysis applied to motor vehicle investigations. [Test and measuring technique for motor vehicles I
I: cf. “Combustion and Internal Combustion Engines”]
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 76
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Motor Vehicle Handling Characteristics II (Gauger, Haken)
Fahreigenschaften des Kraftfahrzeugs II
Special mathematical and mechanical methods; combined motions; selected problems.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Motor Vehicle Bodies (N.N.)
Kraftfahrzeugaufbauten
Package; field of view; mathematical model of the body; strength characteristics; configurations; body tests; vibrational behaviour; safety problems.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Body Technology (Potthoff)
Karosserietechnik
Design; calculation; vibration testing; acoustics.
Semester: WS Hours per Week: 1
Type: L Prerequisites: --
Examination: oral
Credits: 1,5
Reconstruction of Road Accidents (Hörz)
Rekonstruktion von Straßenverkehrsunfällen
Road accident statistics; procedure of passing; procedure of braking; cornering technique; procedure of collision; road accidents with cyclists; road accidents with pedestrians; road accidents at night; methods of calculation.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Driving Mechanisms of Off-RoadVehicles incl. Tractors (Hörz)
Fahrmechanik der Geländefahrzeuge einschließlich Ackerschlepper
Relations between tyre and ground; effects on the concept of off-road-vehicles; different concepts of agricultural tractors (wheeled tractor and crawler-type vehicle).
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Calculation Methods of Road Accidents (Hörz)
Berechnungsverfahren für Fahrzeugzusammenstöße
Puls theorem; swirl theorem; energy conservation law; solutions for an eccentric push; reconstruction of a push with dates of road accidents.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 77
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Handling and Braking Characteristics of Commercial Vehicles (v. Glasner)
Fahr- und Bremsmechanik der Nutzfahrzeuge im Straßeneinsatz
Basis, tyre behaviour, special test procedures, interactions between test bench and calculation.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Development of Commercial Vehicles (Lindenmaier)
Entwicklung von Nutzfahrzeugen
Outer parameters, drive train, engines, alternatives, construction, suspension.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Automobile Design (Concept and General Layout) I/II (Gaus)
PKW-Konstruktion (Konzeption und Gesamtentwurf) I/II
General layout and construction, methods and aids for automobile design, most important rules and regulations, general layout including dimension layout, discussion of the parameters concerning the general layout, driving performance, fuel consumption and handling characteristics, driver’s place, special cases, important aggregates and systems.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Vehicle Electronics (External Lecturer)
Elektronik im Kraftfahrzeug
Electrical and electronic systems in the motor car including control units, sensors and actuators.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Vehicle-Recycling (Steinhilper, Assmann)
Kraftfahrzeug-Recycling
Boundary conditions; basics; rules; standards; energy balance and material balance; production recycling; construction for good recycling; removal; re-utilisation; vehicle utilisation.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Mechanical Design Engineering III/IV (Seeger)
Technisches Design III/IV see main course „Design Technology“
Information Package 78
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Finite Element Method in Statics and Dynamics (Gaul)
Methode der Finiten Elemente in Statik und Dynamik see main course „Engineering Mechanics“
Technical Acoustics (Hübner)
Technische Akustik see main course „Thermal Turbomachinery“
Machine ry Acoustics A or B (Hübner)
Maschinenakustik A oder B see main course „Thermal Turbomachinery“
Measurement Techniques in Acoustics(Hübner)
Akustische Meßtechnik see main course „Thermal Turbomachinery“
3.17 Power Plant and Firing Technology
(Kraftwerks- und Feuerungstechnik)
Institute of Process Engineering and Power Plant Technology (IVD)
Combustion Technology I (Hein)
Verbrennung und Feuerung I
Combustion technology: fuels, combustion process, flame technology, burners and firings, heat transfer in the furnace, pollutant formation and reduction in industrial combustion systems.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: written
Credits: 3
Combustion Technology II (Schnell)
Verbrennung und Feuerung II
Turbulent flow, radiant heat transfer, combustion of fuels and pollutant formation in flames and furnaces: fundamentals, mathematical models and simulation.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Boiler Technology (Hein)
Dampferzeugung
Processes in the boiler, types and styles of construction, insertion into the thermal power plant, performance in service, closed- and open-loop control.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: written
Credits: 3
Information Package 79
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Power Plants I (Schnell, Spliethoff)
Kraftwerksanlagen I
Energy and CO
2
emissions, energy demand and energy resources, CO
2
enrichment processes and CO
2
mitigation techniques, reference power plant based on bituminous coal and lignite, efficiency enhancement by advanced steam parameters, principles of a combined cycle (gas- and steam-turbine) power plant.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Power Plants II (Schnell, Spliethoff)
Kraftwerksanlagen II
Combined cycle power plants and power plants fired with natural gas and/or coal, processes of coal-fired combined cycle power plants (pressure gasification and pressurised firing), CO
2
-neutral energy sources (biomass).
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Exhaust Gas Purification at Furnaces (Hein, Baumbach)
Abgasreinigung bei Feuerungsanlagen
Removal of particulate matter, reduction of nitrogen oxides, flue gas desulphurisation (dry and wet), separation of special pollutants.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Power Engineering and Environmental Technology (Hein)
Energie- und Umwelttechnik
Survey of energy management; subsystems of a power plant with fuel preparation, combustion technology, water treatment, types of steam generator constructions, steam turbines and auxiliary equipment; gas-turbine power plants; new power plant technologies: combined cycle power plant (gas- and steam-turbine power plants); pollutants and emission control.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Air Pollution Prevention (Baumbach)
Reinhaltung der Luft
Formation of air pollutants, dispersion and conversions in the atmosphere and deposition, effects on human beings, animals, plants and materials, emission control techniques, regulations, actual problems of air pollution prevention.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 80
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Measurement and Analysis of Air Pollutants (Baumbach)
Messen und Analysieren von Luftverunreinigungen
Fields of application, physical and chemical measurement methods for gaseous pollutants, measurement methods for particles, set-up of measurement sites and stations, sampling systems, evaluation of emission and air quality measurements.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Technology of Thermal Waste Treatment I (Seifert)
Technik der thermischen Abfallbehandlung I
Waste management - introduction; legislative regulations; objectives and developments of thermal waste treatment; basic processes; waste incineration-comparison of the combustion systems-; pyrolysis/ gasification; combined processes.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Technology of Thermal Waste Treatment II (Seifert)
Technik der thermischen Abfallbehandlung I
Formation of pollutants and control mechanisms; energy recovery and flue gas treatment; process residues; ecological and economical comparisons.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Power Plant Chemistry I (Bursik)
Kraftwerkschemie I
– Chemische Verfahrenstechnik im Kraftwerksbetrieb
Precipitation and flocculation within the preparation of make-up water, cooling water and waste water, ion exchange method and diaphragm/ membrane method, condensate polishing, water purification method specific of nuclear power stations; gas cleaning; NO x
removal and desulphurisation of flue gases; acid-cleaning, chemical cleaning and preservation of power plant systems.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 81
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Power Plant Chemistry II (Bursik)
Kraftwerkschemie II
– Chemische und ökologische Aspekte des Kraftwerksbetriebes
Metal and water - formation and destruction of oxidic surface layers/ coatings and oxidic protective layers/ coatings in water-steam systems; chemistry of water-steam systems in fossil-fired plants and nuclear power stations, accidents; corrosion protection; fossil-fired power plants and environment - chemistry and ecology; nuclear power stations and environment.
Semester:
Type:
SS
L
Hours per Week: 1
Prerequisites: --
Selected Topics of Boiler Technology (Kather)
Ausgewählte Kapitel der Dampferzeugertechnik
Examination: oral
Credits: 1,5
In order to complement the lecture of "Boiler Technology" this course deals with the fields of "dynamics, control, start-up behaviour, static stability and materials of steam generators".
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Automatic Control of Power Plants (Welfonder)
Kraftwerksautomatisierung
Measuring elements and final control elements (FCEs)/ correcting elements; power plant instrumentation and control, safety instrumentation and control; equipment.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Control of Power Plants and Power Systems (Welfonder)
Regelung von Kraftwerken und Netzen
Control of power plant units, control circuit systems for different modes of operation; combined dynamic control of power plant units and electrical subnets in interconnected operation of networks/ interconnected network systems.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 82
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Programming of Process Control Systems in I&C Technology (Welfonder)
Programmierung von Prozeßregelungssystemen in Instrumenten und Regelungstechnik
Construction and action of process control computers and microprocessors; operational planning/ load management/ unit scheduling; typical fields of application of process control systems in Instrumentation and Control (I&C) Technology (power plant, waste water neutralisation, district heating).
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Flow with Heat Transfer (Laurien)
Thermofluiddynamik - Theorie und Anwendung see main course „Energy Technologies and Systems“
Environmental Protection - Elementary Regulations/ Law I/II (Nonnenmacher)
Umweltschutz
– Gesetzliche Grundlagen see main course „Environmental Protection Engineering and Safety Technology“
3.18 Polymer Science
(Kunststoffkunde)
Institute of Polymer Testing and Polymer Science (IKP)
Introduction to Polymer Science (Eyerer)
Einführung in die Kunststoffkunde
Definitions, classifications and economics of polymeric materials. Intermolecular and intramolecular interaction forces and structure of polymers; synthesis: polymerisation, polycondensation and polyaddition. Processing of polymeric materials: conditioning, processing of polymer melts, casting, foaming, manufacturing of fibre reinforced laminates, forming, joining and upgrading. Properties of polymeric materials: mechanical, thermal, electrical, optical and acoustical properties, permeation and processing induced behaviour.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: written
Credits: 3
Application of Polymers (Eyerer)
Kunststoffe in der Anwendung
The basic knowledge taught in the lecture “Introduction to Polymer Science“ is applied, broadened and deepened using special examples of different technical fields such as plastic car fan, cylinder head gasket, PVC window, vehicle body parts produced in polyurethane RIM technique, thermoplastic high tech composites for surf boards, polymeric fuel tanks, polymers for hip and knee endoprotheses, snap fits, closed loop balancing of products and services, CIM in polymer processing, and environmental aspects of polymers.
First there are considered the technical aspects of the application, in the next step a list of
Information Package 83
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering requirements is defined and the material is selected by taking into account the relevant constructive aspects as well as the processing boundary conditions. Furthermore, the effects of material selection, construction aspects, processing technologies, quality assurance, environmental impact are shown with respect to their interactions within the technical solutions.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: written
Credits: 3
Polymer-Engineering (Eyerer)
Polymer Engineering
Polymer Engineering (PE) is the synergetic arrangement of development steps leading to products being designed not only with respect to technical and economic requirements but with respect to environmental aspects. Such steps are polymer chemistry, material science, processing, construction, mould technology, manufacturing technology, surface technology, quality assurance, consideration of application and utilisation, recycling and disposal.
The aim of the lecture is to demonstrate PE as a practical and material oriented method of product development taking into account the complete lifetime cycle of the products. Using many different parts the interaction of the PE development steps is demonstrated in examples and methodology.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Plastics as Construction Materials (Eyerer, Ludwig)
Kunststoffe als Konstruktionswerkstoffe
The time and temperature dependent mechanical properties of polymeric materials require specific calculation methods and designing rules for correct dimensioning. Starting with parts of simple geometry the dimensioning is shown for different parts such as screws, tooth wheels, rolls and sliding bearings as well as for polymer specific joining techniques like snap fits or welding. Further topics are the creation and estimation of residual stresses, ageing behaviour and chemical resistance, friction and wear, metal inserts, calculation methods of strength and stability, model experiments, design rules for injection moulded parts, processes causing the change of dimension and some economic aspects.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
3
--
Examination: oral
Credits: 4,5
Information Package 84
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Elastomers (Eyerer, Möginger)
Elastomere Werkstoffe
General introduction (history, definitions, classification, economics); elastomer types - fillers – additives; processing of elastomers (processing technologies, cautchouc properties, curing behaviour); properties of elastomers (mechanical properties, swelling behaviour, chemical resistance, ageing behaviour with respect to temperature, ozone, UV-light, resistance against microbes, low temperature and permeation behaviour); thermoplastic elastomers; applications (tires, seals, vibration dampers); testing of elastomers and identification of elastomers; quality assurance of rubber parts.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Physics and Physical Chemistry of Polymers (Eisenbach)
Physik und physikalische Chemie der Polymere
Conformation, structure and dynamics of polymers in bulk and in solution, thermodynamics of polymer mixtures, critical phenomena, solid state properties.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Polymer Testing (Pöllet)
Kunststoffprüfung
Manufacturing of test bars; mechanical testing, short term and long term test, effects of deformation rate and temperature; thermal testing, thermal expansion, thermal conductivity, thermal shape resistance, flammability; electrical testing, resistance, dielectric properties; chemical resistance, chemical analytical testing, weathering; physical testing, density,
DTA, structure, optical properties, permeation; tests for the processability of materials and the effects of processing, flow and trickle behaviour, solution and melt viscosity, shrinkage, residual stresses, orientations; non destructive testing; testing of parts and semifinished products, foils, foams, pipes, glued joins; designing of polymer testing lab.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Ageing and Degradation of Polymers (Eyerer, Twardon)
Alterung von Kunststoffen; Praxis
– Prüfung - Theorie
Ageing and degradation of polymers limit their period of use. Examples of damages caused by ageing and degradation show the reasons and mechanisms. Methods to predict the lifespan of polymer products are explained. Possibilities how to improve the products in respect to lifespan are also performed. Further steps introduce methods to characterise the degradation and ageing process. Another part of the lecture gives an overview of biodegradable polymers and polymer recycling.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 85
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Polymers and Environmental Aspects (Hesselbach)
Kunststoffe und Umwelt
Effects of pollution substances and contaminants, laws and regulations, environmental engineering, emission of low molecular substances and contaminants during synthesis and processing of polymers, important examples of workers’ and environment protection, diffusion and permeation of low molecular substances, flammability aspects of polymers, biocompatibility of polymers.
Semester:
Type:
SS
L
Hours per Week: 2
Prerequisites: --
Systematic Product Development (Lang)
Systematik der Produktentwicklung
Examination: oral
Credits: 3
Topics such as product development, problem analysis and decision-making as well as leading and motivation of employees are treated in a seminar style. The principle devolution of a product development comprises the points: aims and risks of the industrial product development, organisation and project management, development of products being both market and manufacturing adequate, value optimised design, requirements and tests, product introduction and quality assurance, long term support.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Application of Ceramics (Busse)
Keramikstoffe und ihre Anwendungen
Ceramics are inorganic non-metals. They are often used in extremely demanding applications and therefore offer a great innovative potential. Manufacturing processes and special features of various ceramics are introduced. Examples show actual applications e.g. motor- and turbine construction, tooling and computer electronics.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
NDE in Quality Assurance (Busse)
Zerstörungsfreie Prüfverfahren in der Qualitätssicherung
Modern quality assurance increasingly demands the use of NDE methods on materials and components. Early detection of defects caused in manufacture or service life as well as monitoring of fracture processes is required in order to exchange damaged parts in time. Modern testing methods with an emphasis on those applicable to polymer materials are introduced (e.g. microwave scanning, speckle-interferometry, lockin-thermography, laser-vibrometry, ultrasonic) and their typical use is demonstrated.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 86
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Thermography: Techniques and Applications (Busse)
Thermographie: Verfahren und ihre Anwendungen
In safety relevant components fast defect detection is of vital importance. Thermography and especially its modern dynamic versions are able to remotely acquire images of hidden structures and defects (e.g. cracks in ceramics, coating defects, delaminations in laminates) on the basis of heat transfer. Measurement techniques are introduced and examples of technical applications are given.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Fundamentals of Rhetoric (Fey)
Grundlagen der Rhetorik
The short presentation; fundamentals; ‘How do I surmount my internal restrictions when speaking?’; attitude and gesture of a speaker; requirement profile of a speaker; the shorter presenta tion; the longer presentation; handling of stage fright; ‘What can you do to become an improved speaker?’.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Technical Presentation for Engineers (Fey)
Der Fachvortrag für Ingenieure
Basic thoughts before presenting technical problems; external and internal views; the three tasks of a speaker; three criterions to measure a technical presentation; the Five
Step: can it always be used?; the use of technical devices.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Fibre Science - Manufacturing of Man-made Fibres (Planck)
Grundlagen der Faserstoffe; Herstellung von Chemiefasern see main course „Textile Technology“
Tribology (Föhl)
Tribologie - Verschleißkunde see main course „Materials Testing, Materials Science and Strength of Materials“
Introduction to the Polymer Technology and Fundamentals (Fritz)
Einführung in die Kunststofftechnologie und Grundlagen see main course „Polymer Technology“
Polymer Processing I (Fritz)
Kunststoffverarbeitung I see main course „Polymer Technology“
Information Package 87
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
3.19 Polymer Technology
(Kunststofftechnologie)
Institute of Polymer Technology (IKT)
Introduction to the Polymer Technology and Fundamentals (Fritz)
Einführung in die Kunststofftechnologie und Grundlagen
Introduction: classification, generation and property profiles of polymer materials (macromolecular structure and morphology of polymers). Mechanical, tribological, rheological and thermal properties of polymer materials, structure/ property relationship. Descriptive analyses of current polymer processing techniques of economic significance: technology of moulding and forming, concepts of polymer split-up and joining, strategies of coating and surface finishing, molecular orientation processes. Plant and process design and lay-out.
Fundamentals: the equations of continuity, momentum and energy as well as rheological and thermal constitutive equations to describe unit operations in polymer compounding and processing. Viscous, visco-elastic and elastoplastic properties of polymer melts. Analytical and numerical description of velocity-, pressure- and temperature-fields in laminar melt flow. Mechanical/ thermal elementary processes in the area of plastication and cooling of polymers and polymer products. Fundamentals of laminar mixing and dispersion.
Dimensionless model parameters used in the field of polymer processing.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
4
--
Examination: written
Credits: 6
Polymer Processing I (Fritz)
Kunststoffverarbeitung I
Analysis of the most essential polymer moulding technologies (extrusion technology, calendering and injection moulding), regarding processing technology and plant design.
Tribological, thermal and rheological processes in extrusion systems; extruder and extrusion die as an operating unit. Design of extruder ranges; process control and closed-loop control concepts. Construction and method of operation of complete calendaring lines. Rheological processes within the nip. Injection moulding: plastication, mould filling operation and holding pressure phase under rheological and thermal aspects; sandwich moulding and injection-compression moulding. Modelling and simulation of relevant processes.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Polymer Processing II (Fritz)
Kunststoffverarbeitung II
Analysis of foaming strategies regarding processing technology and plant design: generation of polyurethane integral foams, structural foam moulding, extrusion of expandable thermoplastics, expanded polystyrene production line. Compression moulding: composition and processing properties of thermoset moulding compounds, compression mould design; compression moulding of decorative laminates. Fundamentals of moulding pro-
Information Package 88
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering cesses combined with the generation of macromolecular orientation: fibre spinning, biaxial stretching of sheets and films, stretch blow moulding; obtainable improvement of mechanical properties. Modelling and simulation of relevant processes.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Design Principles for Extrusion Dies and Injection Moulds (Fritz)
Auslegung von Extrusions- und Spritzgießwerkzeugen
Classification of extrusion dies. Design concepts and rheological lay-out. Variation in mandrel support design. Extrusion heads for co-extrusion technology. Heating and cooling of extrusion dies, manufacturing and deformation behaviour. Lay-out of calibrating units and cooling devices for pipe and profile extrusion lines. Design concepts for injection moulds; cavity lay-out supported by FEM-based software-packages. Simulation of mould filling operation and cooling process of the moulded part.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Rheology and Rheometry of Polymer Melts (Fritz, Geiger)
Rheologie und Rheometrie der Kunststoffe
Significance and function of rheology and rheometry in the field of polymer technology.
Definition of stress- and deformation rate tensors, viscous and viscoelastic material properties and relevant rheological material functions. Measuring of rheological meltparameters using capillary and rotational rheometer systems (measuring and evaluation principles). Approximation of material functions. Application of rheological data for simulation of flow and dissipation processes in polymer technology.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Po lymer Compounding and Polymer Recycling (Fritz, Grünschloß)
Kunststoffaufbereitung und Polymerrecycling
Analysis of unit operations of the polymer compounding (methods of separation, mixing and conversion, moulding and handling technologies). Plant design and lay-out for carrying out continuous and discontinuous compounding processes. Polymer modification by incorporation of additives (pigments, stabilisers, lubricants, fillers and fibres). Basic elements of polymer functionalisation, blending and alloying. Process and plant concepts for different polymer recycling strategies: chemical/ physical basic operations, polymer- and raw material oriented recycling concepts, re-use of recycled polymers.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Selected Chapters from Rheology of Polymer Melts (Wagner)
Ausgewählte Kapitel aus der Rheologie der Polymerschmelzen
Information Package 89
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
This lecture will impart a deeper knowledge on viscoelastic flow properties of polymeric liquids. Background knowledge is required (see “Introduction to the Polymer Technology and Fundamentals”
and
“Rheology and Rheometry of Polymer Melts”
). With changing main focuses the following topics will be treated: description of stress and deformation by means of tensors; material-theory based on continuum-mechanical aspects. Molecular and semi-molecular modelling.
Semester:
Type:
WS
L
Hours per Week: 2
Prerequisites: --
Examination: oral
Credits: 3
Computer Aided Projecting Exercises in the Area of Polymer Technology (Wagner)
Rechnergestützte Projektierungsübungen zur Kunststofftechnologie
Teaching of groups to specific tasks of polymer technology, using SUN-workstations, aiming to the practising of numerical methods which are increasingly used for process optimisation. Background knowledge in the area of numerical methods is required. A previous attendance at the course "Numerical Methods in Process Technology" is recommended.
Semester:
Type:
SS/WS
E
Hours per Week:
Prerequisites:
4
--
Examination: oral
Credits: 6
Introduction to Polymer Science (Eyerer)
Kunststoffkunde I see main course „Polymer Science“
Numerical Methods in Engineering (Eigenberger, Sorescu)
Numerische Methoden der Verfahrenstechnik see main course „Chemical Process Engineering“
Simulation Engineering (Zeitz)
Simulationstechnik see main course „Control Engineering“
3.20 Agricultural Engineering
(Landmaschinen)
Institute of Agricultural Engineering (University of Hohenheim)
Farm Tractors (Kutzbach)
Ackerschlepper
Evolution: types, range of use, economic data of automotive agricultural machines and farm tractors. utilisation of farm tractors, load assumptions, load collectives, Mechanical gears: multi-step, stepless, power-shift gears.
Engine, additional sets: characteristics, fuel consumption, fuel injection systems, turbo-
Chassis: supercharge, starting supports, alternative fuel. steering, wheels, brakes.
Information Package 90
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Comfort, safety: cab design, vibrations, OECD-tests, turn over behaviour.
Machine and implement:: arrangement of equipment, power transmission, three point hitches.
Mechanics of movement: forces on tractor and automotive machines, power transmission wheel-soil, efficiency, energy balance.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: written
Credits: 3
Oil Hydraulics (Kutzbach)
Ölhydraulik
Fundamentals of flowing: hydrostatics, hydrodynamics, pressure losses and oil leckages.
Transducer:
Equipment:
Controlling: hydraulic pumps, motors, cylinders. valves, pipes, flexible tubes, filter, storage, heat exchange. primary and secondary controlling, pressure, flow, power controlling, load sensing.
Examples: ranging and running hydrostatic installations in farm tractors and agricultural machines.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Design of Agricultural Machinery and Implement I (Kutzbach)
Konstruktion landwirtschaftlicher Geräte und Maschinen I
Evolution: machine equipment, types, substance properties.
Fundamental functions:
Distribute: seed drill, plant implement, fertiliser, sprayer implement, sprinkler
Cut:
Collect and press:
Semester:
Type:
SS
L irrigation, haying machines. reaping implement, forage harvester. loader, baling press.
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Design of Agricultural Machinery and Implement II (Kutzbach)
Konstruktion landwirtschaftlicher Geräte und Maschinen II
Fundamental functions:
Separate and convey: separating properties, conveying equipment, combine harvester, potato and beet pickup loader.
Soil tillage: operation of soil tools, plough (primary soil tillage), cultivator, harrow (secondary soil tillage).
Exercises: examples in design, function, structure of agricultural machinery for soil tillage, drilling, harvesting and processing.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Information Package 91
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Building Machinery I/II (Messerschmidt, Gelies)
Baumaschinen I/II see main course „Mechanical Handling“
Basics of Conveying (Wehking)
Grundlagen der Fördertechnik se e main course „Mechanical Handling“
Materials-handling Technology for the Disposal of Waste (Wehking)
Fördertechnik für die Entsorgung see main course „Mechanical Handling“
Kinematics (Lechner)
Getriebelehre see main course „Design Technology“
Fundamentals of Mechanical Process Engineering (Piesche)
Grundlagen mechanischer Verfahrenstechnik see main course „Mechanical Process Engineering“
Design of Vehicle Transmissions (Lechner)
Konstruktion der Fahrzeuggetriebe see main course „Design Technology“
Practice of Systematic Design (Binz)
Praxis des systematischen Konstruierens see main course „Design Technology“
Mechanical Design Engineering I/II (Seeger)
Technisches Design I/II see main course „Design Technology“
Technical Environmental Protection (Lohnert, Wehking, Baumbach)
Technischer Umweltschutz see main course „Environmental Protection Engineering and Safety Technology“
3.21 Laser Material Processing
(Laser in der Materialbearbeitung)
Institute of High Power Beam Technology (IFSW)
Fundamentals of HighPower Lasers (Laser Technology I) (Hügel)
Grundlagen der Hochleistungslaser (Lasertechnologie I)
Physical fundamentals of laser radiation, laser-active medium, interaction radiation/ laseractive medium, power amplifier and oscillator, Q-switch, resonators (classification, modes,
Information Package 92
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering polarisation), propagation of laser beams, high-power lasers (media, excitation techniques, technological aspects), in particular CO2-, Nd: YAG- and diode lasers.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
Material Processing by HighPower Lasers (Laser Technology II) (Hügel)
Materialbearbeitung mit Hochleistungslasern (Lasertechnologie II)
Lasers and their implications for manufacturing, components and systems for beam guiding and shaping, handling, interaction phenomena laser beam/ workpiece (wavelength, intensity, polarisation, material properties, etc.), physical and technological fundamentals for cutting, drilling, welding and surface treatments, process control, safety aspects, economic considerations.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Laser Processes in Fine Mechanics (Dausinger)
Laserverfahren für die Feinwerktechnik
Lasers, joining technologies with minimised heat load (welding, soldering), high-precision ablation (drilling, cutting, structuring), surface modifications, scribing.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Resonators and Beam Quality (Giesen)
Resonatoren und Strahlqualität
Design of resonators, near and far-field properties of laser beams, diagnostics of beam properties, optical elements for beam guiding and shaping.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Solid State and Diode Lasers (Opower)
Festkörper- und Halbleiterlaser
Active materials, crystals, excitation concepts, thermal problems, devices; basic phenomena in laser diodes, beam characteristics; frequency conversion.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Lasers for Information Processing (Opower)
Lasertechnik für die Informationsverarbeitung
Image and pattern recognition, self-teaching systems, elements for optical data processing, optical realisation of neuronal systems.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 93
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Optical Measurement Technique and Measuring Procedure (Tiziani)
Optische Meßtechnik und Meßverfahren see main course „Technical Optics“
Welding (Maier)
Schweißen see main course „Materials Testing, Materials Science and Strength of Materials“
3.22 Materials Testing, Materials Science and Strength of Materials
(Materialprüfung, Werkstoffkunde und Festigkeitslehre)
State Material Testing Institute (MPA)
Strength of Materials (Roos or Schmauder)
Festigkeitslehre I
Calculation of the strength of smooth, notched as well as cracked components made of ductile and brittle materials under static, cyclic and impact loading in the range of high and low temperatures and for short and long life time with regard to different environmental conditions (corrosion, irradiation etc.). Material characteristics, constitutive equations, equivalent stress and strain, yield conditions at multiaxial state of stress. Calculation with strain limitation - partially and fully plastic behaviour. Consideration of additional and secondary stresses as well as residual stresses. Fundamentals of fracture mechanics. Introduction in safety assessment. Fundamentals of finite element method. Practices: application of the cour se’s content in practical examples.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Materials Science (Roos or Schmauder)
Werkstofftechnik
Theory of dislocation: lattice defects, types of dislocation, reactions and movement of dislocations, plastic deformation of metals, slippage and yield stress of mono- and polycrystals. Strengthening Methods: mixed crystals, strain hardening, grain refining, precipitation hardening, combined methods. Influences on the material behaviour: material characteristics, state of stress, high and low temperatures, loading rate. Static loading: equivalent stress and strain, determination of stress-strain-curves, Bauschinger theory, isotropic and kinematic hardening, elastic-plastic deformation, fracture deformation. Cyclic loading: fatigue strength, influences on fatigue strength, damage accumulation, cyclic stress-straincurve, cyclic elastic-plastic deformation. State of stress (basics): stress tensor, principal stresses. Linear-elastic material behaviour: constitutive equations, anisotropy, hydrostatic and deviatoric stress state, invariants of stress tensor, deviatoric stress. Elastic-plastic material behaviour: Yield conditions (e.g. Tresca, v. Mises ), Hencky equations, Prandtl-
Reusz equations
Information Package 94
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Visco-elastic material behaviour: basics and models, creep laws. Advanced materials: overview, ceramics, fibre composites. Examples.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Heat-Treatment of Steels (Blind)
Wärmebehandlung von Stählen
Fundamentals of metallurgy, processes. Solidification and phase-transformation behaviour of the iron-carbon-system as well as its usual modifications. Time-temperaturetransformation-diagrams, time-temperature-austenitising-diagrams. Heat-treatments like annealing, hardening, tempering, curing as well as thermomechanical and thermochemical treatments. Embrittlement effects. Examples for non-alloyed and low-alloyed engineering steels, austenitic steels and tool steels with regard to the achievable quality.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Tribology (Föhl)
Tribologie -
Verschleißkunde
Tribology, friction, wear and lubrication, system analysis, types of wear, wear appearances, wear mechanisms, boundary surface processes, sliding wear of metals, polymers and ceramics, lubrication states, reaction layer formation, ´flash temperature´, rolling processes, fretting ,abrasive wear, erosion, cavitation, wear simulation, wear resistant materials, wear measurement techniques (e.g. by means of radionuclids).
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Methods of Elastic-Plastic Strength Calculation (Schmauder)
Methoden der elastisch-plastischen Festigkeitsberechnung
Fundamentals of theory of elasticity, equilibrium- and compatibility conditions, stressstrain-relations. Fundamentals of elastic-plastic material behaviour, yield curves under small deformation, equivalent stress and strain, stress functions, energy laws, limit analysis, slip line theory, numerical methods: method of finite differences, finite element method. Examples.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+1 Examination: oral
Credits: 4,5
Information Package 95
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Materials Testing (Sturm)
Materialprüfung
Usual destructive and non-destructive testing methods for metals. Static, cyclic and impact loading, special test methods: large-scale and component testing to assess the risk of brittle fracture. Measuring technique and tools: electrical and electronic registration and processing of measuring data, high speed kinematography. Reliability of non-destructive testing methods.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Applied Stress Analysis (Kockelmann)
Angewandte Spannungsanalyse
The stress of a loaded component is often gained easier by measurement than by calculation. Fundamentals of methods, selection of measuring points, analysis of measurements
(procedures and equations, source of error, plastic deformation, practical approximation methods). Practical application of the results.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Welding (Maier)
Schweißen
Weldability: definitions, technology and metallurgy of welded joints, effects of welding on steel properties, welding methods, welding electrode, testing of materials with regard to weldability and testing of joints with regard to defects and service behaviour. Practical applications.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Applied Fracture Mechanics (Roos)
Angewandte Bruchmechanik
Linear-elastic fracture mechanics, stress intensity K
I
. Elastic-plastic fracture mechanics, crack resistance curves based on J-integral, crack tip opening, crack initiation and crack resistance. Determination of plastic limit load. Determination of material characteristics: fracture toughness K
Ic
, crack initiation values J i
, J ic
, CTOD i
. Examples for the assessment of cracked components.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Knowledge Based Systems (KBS) in Safety- and Structural Mechanical Analysis
(Jovanovic)
Wissensbasierte Systeme in Sicherheits- und Strukturmechanikanalysen
Information Package 96
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Fundamentals of safety- and reliability theories, probabilistic safety- and structural mechanics analyses of components, fundamentals of knowledge based systems (KBS), practical application of KBS in structural mechanics, decision theory and forensic engineering.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Safety Technology of Energy and Chemical Plants (Vinzens)
Sicherheitstechnik von Energie- und Chemieanlagen
Problems of technical progress and risk, design principles of operational systems, demands for construction, manufacturing and service, safety analysis with regard to German regulations including the reliability of systems, components of a safety analysis in deterministic procedure and in probabilistic procedure including the mathematical fundamentals, failure probabilities, event- and fault tree. Examples of safety analyses.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Introduction to Polymer Science (Eyerer)
Einführung in die Kunststoffkunde see main course „Polymer Science“
3.23 Engineering Mechanics
(Technische Mechanik)
Institute A of Mechanics
Finite Element Method in Statics and Dynamics (Gaul)
Methode der Finiten Elemente in Statik und Dynamik
Fundamentals of continuum mechanics, principles of mechanics, structure synthesis and discretisation, stiffness and mass matrices for rods, beams and plates, equivalent nodal forces, assembly of finite elements, implementation of boundary and constraint conditions, solution of finite element equations, examples from mechanical engineering.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Boundary Element Method in Statics and Dynamics (Gaul)
Randelementverfahren in Statik und Dynamik
Weighted residual approaches, rod and beam problems, direct method for Laplace and
Poisson equation, substructure technique for coupled domains, numerical integration of boundary integrals. Applications in heat conduction, elastostatics, elastodynamics and acoustics in frequency and time domain.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
Information Package 97
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Dynamics of Mechanical Systems (Gaul)
Dynamik mechanischer Systeme
Kinematics of a rigid body in space: location and orientation, relative motion, holonomic and nonholonomic constraints, virtual displacement, degree of freedom. Fundamental dynamic equ ations: laws of momentum, law of angular momentum, d’Alembert’s principle,
Lagrange’s equations of the first kind, kinetic energy. Dynamics of holonomic systems: equations of motion in minimal coordinates derived from d’Alembert’s principle, Lagrange’s equations of the second kind, Hamilton’s canonical equations. Dynamics of nonholonomic systems: equations of motion in minimal coordinates and minimal velocities derived from d’Alembert’s principle, equation of Gibbs-Appell. Linearised equations of motion: linearisation, solution of linear systems, stability, free and forced vibrations of linear holonomic systems. Non-linear systems: analysis in the phase plane, stability.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
Vibrations (Steinwand)
Schwingungen
Linear and non-linear vibrations of one-degree-of-freedom systems: free and forced vibrations with and without damping, approximate and numerical methods of non-linear vibrations. Linear vibrations of multidegree-of-freedom systems: free and forced vibrations.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
Noise Reduction/ Structure-Borne Sound (Gaul)
Schallschutz/ Körperschall
Generation and propagation of deformation and stress waves in flexible structures as well as the associated sound radiation in audible frequency range. Noise control by avoidance or reduction of structure-borne sound.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Optimisation Methods with Applications (Kistner)
Optimierungsverfahren mit Anwendungen
“Static” optimisation with numerical methods, gradient methods, conjugated gradients, quasi linearisation. “Dynamic” optimisation (Bellman). Optimal control of dynamic systems with numeric and examples of application.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
Information Package 98
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Satellite Dynamics (Sorg)
Satellitendynamik
Orbit and attitude dynamics. Coupling between orbit and attitude dynamics. Classification of satellites. Spin stabilisation. Passive and active stabilisation. Stabilisation of flexible spacecraft. Stabilisation examples.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
3
--
Examination: oral
Credits: 4,5
Aerospace Sensors I (Sorg)
Sensoren der Luft- und Raumfahrt I (Kreiselgerätetechnik)
Electrical signal processing. Angular and position sensors. Torquers. Gyro motors. Rate gyros. Attitude gyros. Gyro compasses. Inertial platforms.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Aerospace Sensors II (Sorg)
Sensoren der Luft- und Raumfahrt II
Accelerometers. Sun and horizon sensors. Measurement of altitude, distance and velocity.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Exercises of Finite Element Method Applications (Dillenkofer)
Übungen zur Anwendung der Finiten Elemente Methoden
Application of the finite element method (FEM) of structure analysis and fluid dynamics.
Competing methods: difference method, boundary element method (BEM); computational exercises: model generation, net generation (Pre-processing), calculation and visualisation of the results (Post-processing).
Semester:
Type:
SS
E
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Simulation Techniques (Zeitz)
Simulationstechnik see main course „Control Engineering“
Information Package 99
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
3.24 Technical Optics
(Technische Optik)
Institute of Technical Optics (ITO)
Fundamental Laws of Optics (Tiziani)
Optische Grundgesetze
Fundamental laws and components; image formation with lenses, mirrors, prisms; principle design of optics; laws of photometry; wave optics.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+2
--
Examination: written
Credits: 6
Optical Measurement Technique and Measuring Procedure (Tiziani)
Optische Meßtechnik und Meßverfahren
Basis, measuring microscope, measuring telescope, angular and linear optical encoder.
Interferometric measurement technique, application of the Moiré-phenomenon. Base distance measuring device. Testing of optical components.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Optical Data Processing (Tiziani)
Optische Informationsverarbeitung
Fundamental laws of diffraction. Fourier-transformation with examples. Optical data processing. Resolution of optical instruments. Holography, holographic interferometry, and granulation in measuring technique. Optical image formation and optical transfer function, electro-optics.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Technical Photography (Lenhardt)
Technische Photographie
Transfer of information: geometrical optics, beam limiting and frequency response of photographic objectives. Data storage: black-white materials, colour-metric, colour photography. Analysis of data from films: raster of picture points.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 100
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Basis of Holography, Laser- and Fourier Optics (Leonhardt)
Grundlagen der Holografie, Laser und Fourieroptik
Electro-magnetic field and physical appearance of the light. Diffraction and coherence.
Interference, holography. Polarisation and partial polarisation. Modern light sources and laser, laser optics, characteristics of laser light, application of laser. Fourier optics.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Optics of Thin Films, Surfaces and Crystals (Leonhardt)
Optik dünner Schichten, Oberflächen und Kristalle
Electro-magnetic field with simple methods of matrix algebra. Polarisation, reflection, transmission, total reflection, beam displacement. Modes of the propagation of fields.
Characteristics, production and application of thin films. Important effects of the crystal physics for optical data processing. Surface texture and roughness.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Measuring Techniques for Micro-Structures (Totzeck)
Meßtechniken für Mikrostrukturen
Diffraction and resolution. Optical microscopy (classic, fringe contrast, confocal Principe), electron microscope, raster-probe microscopy (raster-tunnel microscopy, atomic-force microscopy, optical nearfield microscopy, raster-X-microscopy).
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Design and Calculation of Optical Systems I/II (Zügge)
Auslegung und Berechnung optischer Systeme I/II
Introduction in optical construction: formulae of ray tracing, aberrations, Seidelcoefficients; simple construction examples: single lens, aplanatic faces, aplanatic lens, achromat, survey of types of photo-objectives.
Semester:
Type:
SS/WS
L + E/L
Hours per Week:
Prerequisites:
1+1/1
--
Examination: oral
Credits: 4,5
3.25 Data Processing and Digital Control Technology
(Prozessdatenverarbeitung und Prozessleittechnik)
Institute of Process Engineering and Power Plant Technology (IVD),
Department of Power Generation and Automatic Control
Data Processing and Digital Control Technology I/II(Welfonder)
Grundlagen der Prozessdatenverarbeitung und Prozessleittechnik I/II
Information Package 101
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Structure and mode of operation of process- and microcomputers: digital information representation, main memory, central processing unit, input/ output interfaces. Application design: analogous and digital transmission, influence of noise signals and countermeasures. Distributed digital control systems: process computers with distributed intelligence, software structuring and parameterisation of functional control modules. Hierarchical method for projection and documentation of applied control systems: functional system design, implementation and test. Typical applications of digital control systems: in the field of energy engineering, production engineering, basic industry/ process engineering.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
4
--
Examination: written
Credits: 6
Software Structuring and Programming of Process Control Systems
(Welfonder, Gewinner)
Projektierung und Programmierung von Prozessleitsystemen
Comparison of general data processing and process data processing: I/O modules, real time requests, interrupt processing. Programming methods: structured programming, abstract data types, Top-Down design, modularization, tasks and synchronisation concepts.
Structure and comparison of process programming languages as well as software design of digital control programmes. Application examples: process computer programming, structuring of already tested programme modules.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Discrete Control Systems (Welfonder)
Diskrete Regelsysteme in der Prozessleittechnik
Discrete digital control using process- and microcomputers: difference equations, sampling theorem, Z-transform, stability, discrete state space representation. Online-models and
-identification: parameter estimation methods, discrete process observers. Synthesis of discrete control systems: parameter optimised and state space control algorithms. Application examples.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Automatic Control of Power Plants (Welfonder)
Kraftwerksautomatisierung
Sensors and actuators: voltage and current loop interfaces, subordinated position control loops. Operating control technology: unit guiding and model based calculation of reference variables, automatic start and stop of power plant units, unit supervision and operation with the aid of display monitor systems. Safety control technology: steam generator, turbine and generator protection. Equipment technology: structure, mode of operation and reliability of conventional and digital control systems.
Semester: SS Hours per Week: 2 Examination: oral
Information Package 102
Energy Tech./ Design & Manuf. Eng.
Type: L Prerequisites: -- Credits:
Mechanical Engineering
3
Information Package 103
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Interaction and Control of Power Plants and Power Systems (Welfonder)
Regelung von Kraftwerken und Netzen
Control of power plant units: block diagrams of steam generators, turbines and generators for fossil and nuclear heated steam power plants as well as for hydro power stations; control concepts for different operating modes. Dynamic interaction of power plants and power systems: dynamics of power plants, loads and power systems; system control loops, power system simulation technique, comparison of measuring and simulation results.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Feedback Control II (Gilles)
Regelungstechnik II see main course „Control Engineering“
Applied Computer Science (Rühle)
Angewandte Informatik I see main course „ Applied Computer Science“
Measurement Techniques II (Stetter, Eyb, Kille)
Meßtechnik II – Meßtechnik an Maschinen und Anlagen see main course „Thermal Turbomachinery“
Power Plants I/II (Schnell, Spliethoff)
Kraftwerksanlagen I/II see main course „Power Plant and Combustion Technology“
Transients in Plants with Hydraulic Machinery (Llosa)
Instationäre Vorgänge in Anlagen mit hydraulischen Maschinen see main course „ Fluid Mechanics and Hydraulic Machinery“
Control Technology for Machine Tools and Industrial Robots (Pritschow)
Steuerungstechnik der Werkzeugmaschinen und Industrieroboter see main course „Control Technology“
Motor Vehicles I/II (Wiedemann)
Kraftfahrzeuge I/II see main course „Vehicle Engineering“
Polymer Processing I (Fritz)
Kunststoffverarbeitung I see main course „Polymer Technology“
Air Pollution Prevention (Baumbach)
Reinhaltung der Luft see main course „Power Plant and Combustion Technology“
Information Package 104
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
3.26 Control Engineering
(Regelungstechnik)
Institute of System Dynamics and Control Engineering (ISR)
Feedback Control I (Gilles)
Regelungstechnik I
Basic concepts of automatic control engineering, formulation of differential equations for loop elements, time and frequency domain analysis of linear systems, Laplace transformation, transfer function, frequency response, Bode diagram, criteria for stability, Nyquist stability criterion, root locus technique, design of closed loop systems, non-linear control
(describing function).
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Feedback Control II (Gilles)
Regelungstechnik II
State space description for dynamic systems, non-linear controller design in the state space, Ljapunow’s criterion of stability, design of control strategies in the state space (pole placement, modal control, deadbeat controller), optimal control, Hamiltonian theory,
Pon tryagin’s maximum principle, state observers.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
Dynamics of Chemical Processes (Gilles)
Dynamik verfahrenstechnischer Systeme
Fundamental principles of thermodynamics of mixtures, introduction to irreversible thermodynamics, entropy and stability. Formulation of balance equations (energy balance, mass balance, momentum balance), single-phase systems (CSTR), two-phase systems
(tray of a distillation column), systems with distributed parameters (catalytic reactor).
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
Dynamics of Non-technical Systems (Breuel)
Dynamik nichttechnischer Systeme
Applications of cybernetics in non-technical areas, e.g. economics, biology, sociology, ecology and medicine. Methods and techniques for the modelling of non-technical systems. Analysis of non-linear dynamical models.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Information Package 105
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Simulation Engineering (Zeitz)
Simulationstechnik
Introduction to digital simulation of dynamical systems; iterative methods for solving algebraic equations; numerical integration methods for solving ordinary differential equations, differential and algebraic equations, and boundary value problems; numerical solution of partial differential equations; simulation tools ISRSIM and ACSL; discrete-event systems; simulation tool SIMAN for discrete-event systems. The practical computer work gives students the chance to work on the tasks studied in the exercises, using personal computers and the simulation tools ISRSIM, MATLAB, ACSL, and SIMAN.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Control of Non-linear Systems (Zeitz)
Regelung nichtlinearer Systeme
Fundamentals of non-linear systems. Analysis and synthesis of time variant systems. Lie derivatives and non-linear systems. Stability and centre manifold theorem. Controllability.
Observability. Non-linear normal forms. Asymptotic tracking. Exact input/ output and input/ state linearisation. Decoupling, flat systems, non-linear observers. Sliding mode control.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
Control of Distributed Parameter Systems (Zeitz)
Regelung verteilter Systeme
Technical and non-technical examples of plants with distributed parameters. Mathematical modelling, solution techniques for partial differential equations, input/ output behaviour, measurement and control devices. Structure of closed loop. Controller design. Statespace description. Stability. Controllability. Observability. Optimal control. Observers. Simulation techniques for systems described by partial differential equations.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
New Methods in Multivariable Control (Raisch)
Neue Methoden der Mehrgrößenregelung
Description of linear multivariable control systems (state-space, transfer matrix, and matrix fraction description). Minimal realisation. Meaning of multivariable poles and zeros. Analysis of linear control systems: stability, performance, robustness. Fundamentals of functional analysis. Controller design: internal model principle, LQ-methods, LQG/LTR-design, direct and inverse Nyquist array method, characteristic-locus method, H
- and H
2
- optimisation,
- optimal control.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
Information Package 106
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Electrical Signal Processing (Wehlan)
Elektrische Signalverarbeitung
Fundamentals: signals, spectra, power, levels, two-poles, networks, four-poles. Components: R, C, L, transformers, diodes, transistors, integrated circuits, operational amplifiers.
Circuits: transistor circuits, applications of operational amplifiers, electronic switches, sample and hold. Filters: filter types, filter characteristics, filter approximations, frequency transformations, filter realisations. Modulation: AM, PM, FM. Signal acquisition. Power amplifiers.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+2
--
Examination: oral
Credits: 6
Real-time Data Processing (Wehlan)
Echtzeit-Datenverarbeitung
Digital electronics: boolean algebra, gates, integrated circuits, logic families, memories, coding, sequential logic, dependency notation, PLDs, areas of application of digital VLSI circuits. Process interfaces: D/A and A/D converters, application of converters in sampled data systems (quantisation noise, sampling theorem, oversampling), frequency converters
(VFC, FVC, PLL).
Systems for real-time data processing: structural elements (LIFO, FIFO, interrupts, DMA, memory management, cache), interfaces (synchronisation, error protection, example: IEC bus), system examples (digital signal processors, FFT, distributed process control systems).
Software: processes, real-time languages, real-time operating systems, synchronisation
(busy waiting, semaphore, rendezvous, clock synchronisation), communication (pipe, mailbox, shared memory), process and experiment automation, real-time language
PEARL.
Digital filters: overview, examples, Z-transform, bilinear transform, structure of FIR filters, design of FIR filters, filter order, interpolation, digital PID controller.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: oral
Credits: 6
Process Control in Chemical Engineering (Schuler)
Prozeßführung in der Verfahrenstechnik
Process-description to run a process; recipes and basic operations in process control; generation of process control strategies out of process descriptions; sequential function charts and petri-nets; practical examples of process control strategies of distillation columns, chemical reactors, batch-processes; basic structures and examples in advanced control; model based process control; optimal process control; CIM/ CIP-concepts; simulation for training and support of operators; safety, quality, reliability; aspects as specification for process control strategies.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination:
Credits: oral
3
Information Package 107
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Dynamics of Mechanical Systems (Gaul)
Dynamik mechanischer Systeme see main course „Engineering Mechanics“
Optimisation Methods with Applications (Kistner)
Optimierungsverfahren mit Anwendungen see main course „Engineering Mechanics“
Discrete Control Systems (Welfonder)
Diskrete Regelsysteme see main course „Data Processing and Digital Control Technology“
3.27 Control Technology
(Steuerungstechnik)
Institute of Control Technology of Machine Tools and Manufacturing Systems
(ISW)
Control Technology I (Pritschow)
Steuerungstechnik I
Deals with construction and design of machine controls, in particular contact controls, hydraulic and pneumatic controls, PLC based controls (SPS) and CNC controls.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: written
Credits: 3
Control Technology II (Pritschow)
Steuerungstechnik II
Deals with construction and design of multiprocessor control systems and communication systems in control hierarchies. Furthermore, the fundamental issues of reliability, security and diagnostic techniques in control systems as well as the control design are examined.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Control Technology for Machine Tools and Industrial Robots (Pritschow)
Steuerungstechnik der Werkzeugmaschinen und Industrieroboter
Deals with copying, application of NC machines and their structure, setting of setpoint by means of interpolation, drives and path-measuring systems, closed loop position control, causes of path errors, system identification, control input generation with industrial robots as well as coordinate transformations, motion equations for IRs and programming.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Information Package 108
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Basics of Process Control Engineering (Storr)
Grundlagen der Prozeßrechentechnik und des Software-Engineering
Deals with basic hardware and software modules, systematic software design as well as examples for application of process control in various processes.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Application of Computers in Manufacturing Technology -
Master Control Technology (Storr)
Prozeßrechnereinsatz in der Fertigungstechnik - Prozeßleittechnik
Deals with the application of computers for automated manufacturing (CAM), especially the monitoring and controlling of linked production systems and the control functions in structure and systematic design.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: written
Credits: 3
CAM, CAP, CAD/NC - Automation of Technological Information Flow I (Storr)
CAM, CAP, CAD/NC
– Automatisierung des technischen Informationsflusses I
Deals with requirements, solutions and development with regard to automated process planning, test planning and assembly planning, in particular computer-aided programming of NC machine tools as well as the combination of CAD and NC programming.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
CAD, CAD/CAM - Automation of Technological Information Flow II (Storr)
CAM, CAP, CAD/NC – Automatisierung des technischen Informationsflusses II
Deals with requirements, solutions and development of automation in design and development as well as the realisation of an integrated information flow from the initial design to the manufacturing process.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Oil-Hydraulic Control Technology (Eisinger, Schmid)
Ölhydraulische Steuerungstechnik I
Deals with the fundamentals of hydraulic systems and their components as well as with examples for calculation.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Information Package 109
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Robot Systems - Design and Application (Wurst)
Robotersysteme
– Auslegung und Einsatz
Structures and components, robot design (drive components, design of robot joints), robot kinematics (process variables), dimensioning of system components as well as examples for application.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Electromechanical Energy Converters and Drives (Gutt)
Elektromechanische Energieumwandler und Antriebe
1) Physical principle and basic structure of electromechanical drive systems. Coupling of mechanics-electromechanics-electronics and informatics to mechatronic systems; interface. 2) Basic types of control and operational performance of electromechanical converters. Field-oriented controlling (direct/ quadrature(dq) system), standardised rotating-field and travelling-field considerations. Linear motors. 3) Applications: mechanically or electrically commutated drive (electronic motors); converter-fed electrical actuators, synchro system, converted cascades. Brushless speed-adjustable drives with squirrel cages, electrical or permanent field rotors.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3/1
--
Examination: written
Credits: 6
Basics of Materials-handling Technology (Wehking)
Grundlagen der Fördertechnik see main course „Mechanical Handling“
Basics of Logistics (Roos)
Grundlagen der Logistik see main course „Mechanical Handling“
Basics of Machine Tools (Heisel)
Grundlagen der Werkzeugmaschinen see main course „Machine Tools“
3.28 Traffic Engineering
(Straßenverkehrstechnik)
Institute of Road and Transportation Planning and Engineering (ISV)
Introduction in Transportation Planning (Wacker)
Einführung in die Verkehrsplanung
Master transportation plans: travel surveys (data collection, methodology) planning instruments, objectives, analysis of demand and supply, fundamentals of forecast of demand (forecast methods, generation, destination choice, modal split, network design and route choice), planning and analysis of demand. Driving dynamics and traffic flow: basics
Information Package 110
Energy Tech./ Design & Manuf. Eng.
Information Package
Mechanical Engineering of vehicular movement, friction properties of paved surfaces, mathematical description of vehicle streams. Alignment and geometric design: cross sectional design, alignment of rural roads, checking alignment and integration into landscape, fundamentals of geometric design of urban streets. Evaluation and decision techniques: impact analysis (noise, exhaust gases, safety, environment, costs), environmental compatibility. Traffic control: design of traffic signals.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Practical Exercises in Transportation Planning (Wacker)
Übungen zur Einführung in die Verkehrsplanung
Dynamics of vehicle movement; traffic flow; cross sectional design. Alignment and geometric design of rural roads and urban streets. Design of traffic signals.
Semester:
Type:
WS
E
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Traffic Management and Control (Wacker)
Verkehrsleittechnik
Traffic flow fundamentals (macroscopic and microscopic flow characteristics; time-space projectory; flow-speed-density relationships; capacity and level-of-service; traffic stream modelling; shock wave and queuing analysis; simulation modelling). Equipment; signal control installations; traffic monitoring; incident detection techniques; communication infrastructure. Traffic system management; telematics in road transport; integrated traffic management schemes; route guidance and variable message signs, parking management and control; public transport priority; traffic lane signalling; vehicle driver information systems; field trials.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Design and Operation of Road Traffic Facilities (Vogt)
Betrieb und Entwurf von Anlagen des Straßenverkehrs
Design fundamentals: information processing, closed loop vehicle-driver-road, optical information, geometry of vehicular movement. Urban streets: elements of main roads and residential streets, traffic calming, design of roadside environment. Design of gradeseparated junctions and at-grade junctions. Road and direction signs, road marking. Priority intersections: calculation procedures, capacity. Impacts of traffic: fuel consumption and exhaust gases, noise, traffic safety.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4.5
111
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Urban Transportation Planning (Vogt)
Verkehrsplanung und Städtebau
Urban transportation planning fundamentals: objectives; planning process; master transportation plans; interrelations between transportation and urban planning; future development of city traffic.
Analysis and forecast of transportation demand: development of the past (reasons, interrelations, impacts) and characteristics of the actual situation [social, economical and political conditions; land use and population characteristics; travel behaviour (activities, mobility, car ownership, car use, etc); transport modelling (theoretical framework, model techniques, aggregate vs. behavioural, model steps, generation of demand, destination choice, modal split, route choice); transport scenarios; road network design].
Investigation and evaluation of transport impacts: theoretical framework, methods.
Parking: demand and supply; management strategies; parking restraint measures, etc; design of on-street-parking and parking lots.
Pedestrian and bicycle traffic: planning fundamentals.
Some aspects of urban planning: fundamentals, history.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Computer Utilisation in Transportation Engineering (Wacker)
Computergestütztes Arbeiten im Verkehrswesen
Fundamentals and framework; examples in simulation, route choice, etc.; different kinds of software tools.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Case Study (Urban Transportation Planning) (Vogt)
Projektstudie
Traffic engineering design of a centre of a medium size town with respect to urban planning. Traffic analysis and forecasting. Street network planning and route assignment.
Planning and design of main roads and streets in residential areas. Design of a square in front of a railway station including a bus terminal. Planning and design of the infrastructure for pedestrian and bicycle traffic (pedestrian zone, bicycle routes, etc.).
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 112
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Transport and Environment (Vogt)
Verkehr und Umwelt
Common basis for all aspects is a case study of a new main road in an urban environment. All subjects are presented and discussed in an interdisciplinary context (transportation, town planning, ecology). Ecological impact analysis and evaluation. Impacts on town planning and land use. Analysis and evaluation of fuel consumption, exhaust gases, noise, traffic safety. Cost and economic impacts (benefit-cost-analysis and investment assessment).
Semester:
Type:
WS/SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
3.29 Thermal Turbomachinery
(Thermische Strömungsmaschinen)
Institute of Thermal Turbomachinery and Machines Laboratory (ITSM)
Basics and Design Principles of Thermal Turbomachinery (Stetter)
Grundlagen und Konstruktions prinzipien der thermischen Strömungsmaschinen
Applications and economic importance; construction types; thermodynamic basics; fluid properties and changes of state; fluid dynamics basics, application to design of components; similarity laws; theory of turbines and compressors; losses and efficiency, influence factors; systematic of components, loads, performance design, manufacturing; strength and vibration problems; labyrinth seals; rotor dynamics; operation modes; unsteady loads; performance map, control; modern numerical calculation methods.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Turbines and Compressors I (Stetter, Messner)
Kraft- und Arbeitsmaschinen I
Steam turbines: fields of application (generator propulsion, industrial propulsions); processes (condensation turbine, pressure turbine, heat turbine); turbine for nuclear power plants; efficiency; design characteristics; special problems (steam wetness, last stage, blade coupling). Gas turbines: fields of application (stationary/ mobile plants - power plants, vehicles, aeroengines, auxiliary propulsion systems); processes, functional circuits, thermodynamics, efficiency; special components (combustion chamber, heat exchanger); special problems (blade cooling, types of fuel, materials, ceramics). Focuses of research and development for steam and gas turbines.
Semester:
Type:
Ws
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Information Package 113
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Turbines and Compressors II (Stetter)
Kraft- und Arbeitsmaschinen II
Turbocompressors and fans: overview, theory of compressors. Axial flow compressor: theory (reaction, flow deviation), blade twisting, secondary flows, losses, characteristic curve of stage. Radial compressors: types of construction, theory (reaction, low performance factors), diffuser, spiral casings, losses, performance map, multi-stage machines, stability considerations, control. Turbochargers. Focuses of research and development for turbocompressors and fans.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Numerical Methods in Fluid and Structural Dynamics (Mayer)
Numerische Methoden in Fluid- und Strukturdynamik
Basic fluid dynamics equations; discretisation of differential equations; mesh generation; boundary conditions; finite difference method, finite volume method; basics of finite element method; solution methods; applications.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Thermal Power Plants (Stetter)
Thermische Kraftwerke
Power industry, construction of power plants, components of power plants, location considerations, thermodynamics of power plant processes, measures for increasing efficiency, nuclear power plants, gas turbine power plants, combined gas/ steam turbine power plants, power-heat coupling (cogeneration), environmental problems of thermal power plants, economic considerations.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Hydroelectric and Thermal Power Plants (Llosa, Messner)
Hydroelektrische und Thermische Kraftwerke
Power industry, demand of energy - regenerative energy. Thermal power plants: construction, thermodynamics of power plant processes, steam power plants, gas turbine power plants, nuclear power plants, combined gas/ steam turbine power plants, present day techniques of coal based electricity generation, cogeneration, environmental problems of thermal power plants. Hydroelectric power plants: hydraulic basis, construction types and operation, equipment, performance, operational conditions.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 114
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Measurement Techniques II (Stetter, Eyb, Kille)
Meßtechnik II
Part “Data Acquisition in Machines and Plants”: analogue signal processing, digital signal processing, data acquisition systems for steady and unsteady variables, flow measurement techniques, vibration measurement techniques, measurement techniques in acoustics. Project.
Semester:
Type:
WS
L + E
Hours per Week: 1+1
Prerequisites: --
Technical Acoustics (Hübner)
Technische Akustik
Examination: oral
Credits: 3
Noise emission, noise immission, sound field quantities, fundamental equations of sound fields, signals, signal analysis, sound radiation, sound propagation, sound absorption, sound reflection, sound field measurements (sound pressure, sound velocity, sound intensity, sound power), standards.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Machin ery Acoustics A: Sound Radiation (Hübner)
Maschinenakustik A: Schallabstrahlung
Foundations of machinery acoustics, foundations of structure-borne sound radiation, boundary conditions, transition conditions, calculation and measurement procedures, sound radiation of model sound sources, direct finite element method, active noise control.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Machinery Acoustics B: Structureborne Sound (Hübner)
Maschinenakustik B: Körperschall
Machinery noise, noise sources, structure-borne sound in three-dimensional solids, structure-borne sound in bars of different geometry and in strings, structure-borne sound in plates of different geometry, damping of structure-borne sound, forced vibration, boundary value problems, eigenvibration, measurement technique, model measurement technique.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Measurement Techniques in Acoustics (Hübner)
Akustische Meßtechnik
Foundations of measurement technology, noise emission measurements, noise immission measurements, standards, ordinances.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 115
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Air Pollution Prevention (Baumbach)
Reinhaltung der Luft see main course „Power Plant and Firing Technology“
Dynamics of Machines (Schiehlen)
Maschinendynamik see main course „Applied Dynamics“
Strength of Materials (Roos)
Festigkeitslehre I see main course „Materials Testing, Materials Science and Strength of Materials“
Interaction and Control of Power Plants and Power Systems (Welfonder)
Regelung von Kraftwerken und Netzen see main course „Data Processing and Digital Control Technology“
Automatic Control of Power Plants (Welfonder)
Kraftwerksautomatisierung see main course „Data Processing and Digital Control Technology“
Electromechanical Energy Converters and Drives (Gutt)
Elektromechanische Energieumwandler und Antriebe see main course „Control Technology“
Methods of Elastic-plastic Strength Calculation (Schmauder)
Methoden der elastisch-plastischen Festigkeitsberechnung see main course „Materials Testing, Materials Science and Strength of Materials“
3.30 Fluid Mechanics and Hydraulic Machinery
(Strömungsmechanik und Hydraulische Strömungsmaschinen)
Institute of Fluid Mechanics and Hydraulic Machinery (IHS)
Hydraulic Machinery (Göde)
Hydraulische Strömungsmaschinen
Turbines, pumps, pump-turbines; basics, construction, characteristic values, cavitation, introduction to design, characteristics and machine behaviour, calculation and construction of components; hydrodynamic gears, valves.
Semester:
Type:
SS
L + E
Hours per Week: 2+1
Prerequisites: --
Examination: oral
Credits: 4,5
Information Package 116
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Computational Fluid Dynamics I (Ruprecht)
Numerische Strömungsmechanik I
Introduction to numerical calculations, introduction to computational fluid dynamics, Navier-Stokes equations, finite-difference method, finite-volume-method, finite-elementmethod, application of CFD.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
3
--
Examination: oral
Credits: 4,5
Measurement Techniques in Fluid Mechanics (Llosa)
Meßverfahren in der Strömungsmechanik
Measurement techniques for hydraulic power plants, methods to measure hydraulic efficiency of hydraulic machinery; discharge measurements, velocity measurements.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Transients in Plants with Hydraulic Machinery (Llosa)
Instationäre Vorgänge in Anlagen mit hydraulischen Maschinen
Dynamic pressure changes in pipes with valves, pumps and turbines, simulation methods, possibilities for reduction of pressure changes, applications.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Design of Hydrauli c Machinery (Göde)
Auslegung hydraulischer Strömungsmaschinen
Operating conditions, selection of turbine type, selection of speed, determination of main properties, design- and off-design behaviour. Design of spiral case, stay vanes, wicket gates, runner and draft tube, axial and radial forces, cavitation behaviour.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Computational Fluid Dynamics II, Computer Exercises (Ruprecht)
Numerische Strömungsmechanik II, Computeranwendungen
Demonstrations and applications of commercial CFD-codes, programming of codes for special applications.
Semester:
Type:
SS
E
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 117
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Introduction to Turbulence Modelling (Ruprecht)
Einführung in die Turbulenzmodellierung
Navier-Stokes equation, Reynolds-averaging, eddy viscosity models, Prandtl mixing length model, k-
model, Reynolds stress models, large eddy simulations.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Selected Topics in Applied Fluid Mechanics (Göde/Brevdo)
Ausgewählte Kapitel der angewandten Strömungsmechanik
Flow separation, vortices in intakes, wicket gates and runners, vortex rope in draft tubes, cavitation, rotor/ stator interaction, introduction to stability analysis, rotating stall, boundary layers, transition to turbulence.
Semester:
Type:
SS
L
Hours per Week: 1
Prerequisites: --
3.31 Technology Management
(Technologiemanagement)
Examination: oral
Credits: 1,5
Institute of Human Factors and Technology Management (IAT)
Technology Management (Bullinger)
Technologiemanagement
Competitiveness demands superior problem solutions which base on trend-setting products with a lead in the field of technology and quality. Competition becomes more and more a competition of technologies. Technology management connects business management with technological know-how and includes the following items: technology development, technology design and technology assessment. The lectures impart information about new methods and procedures concerning the handling of technology: for the identification of relevant technology developments and the evaluation of technology tendencies, for the evaluation of strong and weak points of a company in its technology fields, for the development of organisation forms in order to realise new technologies, for the steering concerning development and introduction of new technologies and for the discovery of possible risks.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Human Factors I/II (Bullinger)
Arbeitswissenschaft I/II
Part I: Ergonomics has an interdisciplinary approach which bears on the human and economical goals regarding work design. Both purposes aim at the creation of humanitarian working conditions in connection with a business structure that is organised for economical success. Therefore, the emphasis of the lecture lies in the fields of ergonomics (Human Factors I) and work system design (Human Factors II).
Information Package 118
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
The lecture 'Ergonomics' deals with the fields of physiology and psychology which are important for the human factors. Based on these facts the ergonomic perfect design of the work environment and work place can be shown. Furthermore, rules and recommendations for the integrated ergonomic product design and for the human-computer-interface design are discussed.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Part II: The methods and basic elements of the work system design play the major role in the second part of the lecture. The discussion covers work analysing methods, proceedings of work pattern, qualification of staff and work organisation. In this connection, the introduction of new work structures (teamwork) is emphasised.
Exercises and examples show the proceedings at the planning of new work structures.
With task design the interpretation of work places can be practised and examples present the product improvement which is caused by the ergonomic design of working materials.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Operating Information Systems (Bullinger, Nöstdal)
Führungsinformationssysteme
Operating information serves the decision-making process in a company. The lecture gives you an idea of the index-orientated business operating system by means of business and data models. Apart from content-orientated questions (planning and operating systems) the lectures also deal with compression problems (index systems, graphs), aspects of adequence (extension, consolidation) and relevance (CSF). Software solutions
(MIS, DSS, EIS) are shown with regard to applicable instruments and the integration of operating information systems. The emphasis lies on decentralised organisation structures in production (WOP) and administration (computer-supported teamwork).
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Technology Assessment (Bullinger)
Technikfolgena bschätzung
Responsible engineering activity presupposes an occupation with the results of developed technologies. The lecture presents methods and procedures for the discovery and prognostication of technical potentials (chances and risks). Alternative options for development and use of certain technologies are built aided by scenario techniques. With regard to the choice of a development direction the ideas of the social discourse have to be considered, too. The lecture presents these new proceedings and illustrates them guided by examples.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 119
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Mathematical Methods of Production Planning (Lentes)
Mathematische Methoden der Produktionsplanung
In contrary to the improvisation, planning is more systematic with respect to a pursued goal as a rational running decision-making process. Today, planning becomes more important, namely because of the internal and external changing circumstances. New mathematical planning methods have been developed in the past few years. They enable enterprises to analyse decision problems and to solve complex optimising tasks either with or without the assistance of computer technologies (e.g. based on linear optimalisation, waiting queue theory, heuristic proceeding). From an engineer's point of view the fundamentals, possibilities and limits of exact and heuristic planning methods have to be discussed and their applications have to be shown guided by practical examples.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Simulation Technology (Warschat)
Simulationstechnik
For planning, configuration, diagnosis and controlling of manufacturing systems, more and more methods of simulation are used. Crucial subjects: simulation of manufacturing and assembly courses, simulation languages, model forming; motion simulation and animation of courses on machines and manual working places.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
CAD/CAP/CAM - Operation Planning and Application Examples (Bullinger, Fischer)
CAD/CAP/CAM – Einsatzplanung und Anwendungsbeispiele
Hardware assembly of CAD systems; cross-linked systems and workstations; input-output equipment, processors. CAD software; presentation of three-dimensional objects by computer, methods of volume output, manipulation functions. Interfaces for graphs, use of
CAD/CAM computers in the field of work layout and manufacturing; NC programming, operations scheduling by computers. All main subjects are deepened by examples - videos, demonstrations on the PC, independent working with CAD systems.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Simultaneous Engineering and Project Management (Bullinger, Warschat)
Simultaneous Engineering und Projektmanagement
In order to plan and settle efficiently extensive duties in an enterprise the following methods of the project management are used:
- imparting of planning foundations, aids: structuring of projects, network planning, project pursuit, planning check-lists, computer application;
- applicability of project management: product development, network planning, integrated settlement of orders. The emphasis lies on the concepts for practice of simultane-
Information Package 120
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering ous engineering which aim the paralleling of duties and processes, the reduction of machining time and the optimisation of value added chains.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Work Design in the Office (Bauer, Kern)
Arbeitsgestaltung im Büro
New methods for a human and increasing efficiency concerning working places are shown. These new methods include the entire planning of offices (layout design and room structuring), the evaluation and choice of working materials (data processing, office technology, means), the equipment (office furniture, chairs, etc.) as well as the design of work environments (concepts for lighting installations, acoustic design, colour, climate) .
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Personnel Management (Bullinger, Gidion)
Personalwirtschaft
A general summary about status and difficulties of the personnel management are given.
Partial fields are deepened, e.g. essential parts of the labour legislation, goals in its contents, judicial and organisational bases of the personnel planning as well as measures of staff reduction from the point of view of the undertaking and the applicant. Other points of emphasis are the impacts of technological and organisational developments on the needs of appropriate qualifications, the questions of management policy and the problems of payment and working time design. Finally these fields are explained by examples.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
HumanComputer Interaction (Fähnrich, Ilg)
Mensch-Rechner-Interaktion
The 'informatisation' of work directed the attention of software developers and users to the design of human-computer interaction. The lecture deals with the design systematic which are specified according to work duties and user groups. It discusses dialogue design and functionality of user interfaces as well as implementation approaches. There is an emphasis on the participative system design, the rapid prototyping and the user interface management systems. Furthermore the principles of software ergonomics are shown and practised by examples.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Rapid Product Development (Bullinger)
Rapid Product Development
The transformation to buyer’s market with detailed customer-demands, an increasing number of varieties as well as decreasing product life cycles characterises tod ay’s com-
Information Package 121
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering petitive environment. To show a fast reaction to the needs of customers has become an essential precondition if a company wants to remain competitive. The efficiency and effectiveness of the product development thus becomes an decisive factor influencing the success of a company. The integration of the different factors such as technologies, organisation structures, information- and communication-systems and the efficient design of these factors are the focus of this event.
Semester: WS Hours per Week: 2
Type: L Prerequisites: --
Examination: oral
Credits: 3
Safety and Health Protection (Kern)
Sicherheit und Gesundheitsschutz
The lecture introduces importance and tasks of work safety. Furthermore, one is looking at the company's internal and external organisation of work safety as well as at the systematic of work safety law. In addition, it deals with causes and avoidance of accidents and disease caused by working conditions.
Semester:
Type:
SS
L
Hours per Week: 1
Prerequisites: --
Software Technology and -
Management (Fähnrich)
Softwaretechnik und -management
Examination: oral
Credits: 1,5
Software is not made as a result of an individual's work, but within a team and with the help of efficient tools. Especially the graphic-oriented software systems changed the basic way of thinking concerning software development. The following systems are in demand: business data models, software architectures, software project management, the use of supporting software tools, object-oriented software development and rapid prototyping.
The lecture shows modern software development and deals by means of examples with the necessary techniques and the belonging software management.
Semester:
Type:
SS
L
Hours per Week: 2
Prerequisites: --
Examination: oral
Credits: 3
Strategic Business Planning (Laidig)
Strategische Unternehmensplanung
Business planning is one of the prime responsibilities of the management board. Key to success is to anticipate changes in customer priorities and to define business models satisfying current and future customer needs. Global competition require global business models for success. The lecture covers methods and processes for defining and implementing global business models. This will be based on examples and references from the computer industry. In details the lecture covers: corporate objectives, corporate culture, shareholder-value, global trends in industry and society, key factors driving changes in customer priorities and definition and implementation of global business models.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 122
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Target-oriented Business Management (Lederer)
Zielorientierte Unternehmensführung
Target-oriented business management comprises holistic and innovative methods of technology-, organisation- and personnel management. Structures and methods of innovative business management are shown, analysed and verified by an example of a worldwide successfully positioned high-tech product. Further crucial points deal with plant/ business management and personnel management as well as personnel development. A plant visit will round off the lecture that is organised in blocs.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Mechanical Design Engineering IV (Seeger)
Technisches Design IV see main course „Design Technology“
Industrial Management I/II (Westkämper)
Fabrikbetriebslehre I/II see main course „Industrial Management“
3.32 Textile Technology
(Textiltechnik)
Institute of Textile and Process Engineering (ITV)
Design of Textile Machines and Textile Processes (Planck)
Konstruktion von Textilmaschinen und Textilverfahren
Discussion of specific requirements for components of textile machine and process automation. Equipment details for the following areas: yarn manufacturing, winding, twisting, texturing, tufting, nonwovens, knitting, weaving, dyeing and finishing.
Semester:
Type:
WS/SS
L
Hours per Week: 2
Prerequisites: --
Introduction to Textile and Fibre Science (Planck)
Einführung in die Textiltechnik
Examination: oral
Credits: 3
Textile terms and definitions. Theory of physico-mechanical fibre and material properties.
Properties of natural and chemical fibres. Discussion of specific fibre requirements for processing of fibres.
Semester:
Type:
WS
L
Hours per Week: 1
Prerequisites: --
Fabric Formation: Weaving and Knitting (Planck)
Verfahren der Web- und Maschenwarenherstellung
Examination: oral
Credits: 1,5
Information Package 123
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Weaving: principal design and components of a weaving machine. Weft insertion techniques. Dynamics of weaving. Fabric pattering and construction. Organisation in a weaving plant. Preparation for weaving. Plant lay-out. Development trends.
Knitting: knitting technology; circular knitting; flat knitting; warp knitting. Fabric construction.
Semester:
Type:
WS/SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Fibre Science - Manufacturing of Man-made Fibres (Planck)
Grundlagen der Faserstoffe; Herstellung von Chemiefasern
Polymer science. Manufacturing of stable fibres and man-made fibres. Fibres for industrial end-use (aramide, C-fibres, glass fibres, etc.).
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Design and Properties of Functional Industrial Textiles (Planck)
Herstellung, Einsatz und Prüfung technischer Textilien
Specific requirements for fibres for industrial textiles. Specifics of the construction. Special process steps in the production of industrial textiles like bonding, heat setting, finishing.
Industrial textiles for filtration, geo-textiles, automotive, tire reinforcement, medicine, hygienic end uses, etc.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Online Quality Control Systems, Statistics and Textile Testing (Planck)
Online-LineProzeßüberwachung bei der Herstellung von Textilien;
Prüfung von Textilien
Standards. On-line control and monitoring systems. Textile testing methods. Statistical analysis of data. Quality management and assurance systems.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Theory of Management and Management Support Systems (Fischer)
Funktion des Management
Introduction into theory of management: dealing with people, motivation, conference technique. Problem analysis. Pareto analysis. Value analysis. Creativity techniques. Management information systems. Basics of budgeting and marketing. Investment calculation.
International operation game INTOP.
Semester:
Type:
WS/SS
L
Hours per Week:
Prerequisites:
2+2
--
Examination: oral
Credits: 6
Information Package 124
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Application of Polymers (Eyerer)
Verbundwerkstoffe see main course „Polymer Science“
3.33 Applied Thermodynamics
(Angewandte Thermodynamik)
Institute of Technical Thermodynamics and Thermal Process Engineering
Heat and Mass Transfer (Hahne, Hasse)
Wärme- und Stoffübertragung
Introduction; technical applications; heat conduction and diffusion; convective heat and mass transfer: single phase flow; radiation; convective heat and mass transfer: flow with phase change.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Principles of Thermal Process Engineering (Hasse)
Grundlagen der Thermischen Verfahrenstechnik
Basics of thermodynamics of mixtures; phase diagrams and the calculation of phase equilibria; balances for mass separation devices; mass transfer; distillation; rectification in tray columns; rectification and absorption in packed columns; evaporation and heat recovery by thermo-compression; crystallisation.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Thermodynamics of Mixtures (Hasse)
Thermodynamik der Gemische
Systematic introduction with the aim to predict thermodynamic properties for practical use.
Contents: the chemical potential; the Gibbs fundamental equation; the equations of Euler and Gibbs-Duhem; the phase rule and phase diagrams; thermodynamic potentials; fugacity and fugacity coefficient, activity and activity coefficient; properties of mixing and excess functions; empirical correlation for the excess Gibbs energy; calculation of phase equilibria.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Condensation and Evaporation Heat Transfer (Mitrovic)
Wärmeübergang bei der Kondensation und Verdampfung
Based on the courses "Heat and Mass Transfer” (Wärme- und Stoffübertragung) and
"Thermal Process Engineering” (Grundlagen der Thermischen Verfahrenstechnik) processes of condensation and evaporation are treated. Contents: laminar and turbulent films; shear films; flooded evaporation; flash evaporation; condensation inside and outside
Information Package 125
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering vertical tubes as well as on horizontal tube bundles; enhancement of condensation and evaporation heat transfer.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Special Subjects of Heat and Mass Transfer (Mitrovic)
Sonderfragen der Wärme- und Stoffübertragung
Heat conduction: non homogeneous materials, direction dependent thermal conductivity,
Onsager relation, transient heat conduction (Boltzmann's similarity transformation), variable surface temperature (Duhamel equation), singularity of the Fourier equation, Cattaneo equation. Forced and free convection: Leveque solution, Graetz-Nusselt solution, falling film flow, convective heat and mass transfer on the solid/ liquid and on the vapour/ liquid interface of the film, Higbie theory, Johnston/ Pigford theory, Nusselt theory. Influence of suction and blowing on pressure drop and heat and mass transfer in tube flow and in the flow over a flat plate, turbulence models, distributions of velocity and temperature in single phase turbulent flows. Processes with phase change: metastable states, nucleate activation in liquids and vapours, conditions of bubble growth, turbulence in condensate films, condensation of vapour mixtures.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Thermodynamics of Optimal Energy Use (Kim)
Thermodynamische Grundlagen optimaler Energieausnutzung
Application of exergy (availability) to analyse and optimise engineering processes. After a short repetition of some fundamentals of thermodynamics the exergy is introduced, and the following subjects are treated: exergy loss and exergy balance; exergy diagrams; exegetic efficiency; changes of exergy and exergy loss in elementary processes; thermodynamic treatment of refrigeration and heat pump processes.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Mass Transfer in Multicomponent Mixtures (Kim)
Stoffübertragung in Mehrstoffgemischen
The transport properties of multicomponent mixtures differ from those of binary mixtures.
In order to handle multicomponent mixtures in a general way instead of Fick's law the
Maxwell-Stefan relations are used. Contents: driving forces and friction in mass transport;
Maxwell-Stefan equation; calculation of the diffusivities and convective mass transfer coefficients. Examples for different mixtures and real conditions; mass transfer and the influence of heat addition or removal.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Information Package 126
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Kinetic Theory of Gases (Runge)
Kinetische Gastheorie
In contrast to classical thermodynamics which deals with macroscopic systems and is based on experience, the kinetic theory of gases considers molecules on the basis of axioms. With a simple model describing molecules as billiard balls the equation of state of ideal gases can be derived. In this way thermodynamic relations can be established even when experiments are difficult to perform, for instance in the region of low pressure.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
3
--
Examination: oral
Credits: 4,5
Low Temperature Engineering (Runge)
Tieftemperaturtechnik
Low temperature engineering is an application of thermodynamics and part of energy engineering. Nevertheless, due to some peculiarities in this field not all tasks can be solved by common methods. The thermal conductivity and heat capacity for instance change their values drastically in the region of low temperatures. The working fluids partly exhibit unusual behaviour as well. Refrigeration processes with adiabatic throttling, with isentropic and isochoric expansion are feasible. By adequate combination of different processes the
COP can be influenced in a favourable manner.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
3
--
Examination: oral
Credits: 4,5
Thermal Radiation (Runge)
Thermische Strahlung
The energy transport by thermal radiation plays a greater role than often assumed. Even at ambient temperature radiation is sometimes predominant and in low temperature engineering it must often be taken into account. For calculation one needs the equation of
Planck (or Wien or Rayleigh-Jeans), the Stefan-Boltzmann equation and the laws of
Kirchhoff, Lambert, Bouguer and Beer. In general, radiation depends on the wave length or frequency. This is particularly true for gases; their radiation can be described illustratively as stream of photons.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Thermodynamic Variables and Equations of State (Runge)
Thermodynamische Zustandsgrößen und -gleichungen
One reason why thermodynamics is considered as difficult science might stem from the great number of variables. Nearly thirty different variables are needed for different practical applications, each of the variables carrying its own name.
Information Package 127
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
The practical meaning of the different variables is explained, for each of them a thermodynamic definition is given and relationships between them are discussed. Finally the variables of state are derived from the fundamental equations.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Temperature Measurement (Runge)
Temperaturmessung
Temperature is of central importance in thermodynamics - not only due to its name. Corresponding to that, temperature measurements are very important for the applications of thermodynamics in engineering. Starting with the concept of temperature different temperature scales are discussed in the light of their historical development. After that, the thermometers using different principles of measurement are treated. Such principles are: the thermal extension of solids, liquids and gases, the vapour pressure and most important - with regard to processing electrical signals - the electrical properties. Finally the correct installation of the gauge is shown which is a necessary prerequisite for a good measurement.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
3.34 Metal Forming Technologies
(Umformtechnik)
Institute of Metal Forming Technology (IFU)
Forming Technology I/II (Siegert)
Umformtechnik I/II
Basics of forming technology; materials and materials physics; mathematical description of forming; tribology and wear; basics of sheet metal forming; stretch metal forming; hydroforming; deep drawing; bending; deep drawing of automotive parts; basics of bulk metal forming; hot and cold flow forming; rolling; wire drawing; tube and pipe drawing; press forming; upsetting; stamping; cutting.
Semester:
Type:
WS/SS
L + E
Hours per Week:
Prerequisites:
4+2
--
Examination: written
Credits: 9
Machines of Forming Technology I (Siegert)
Maschinen der Umformtechnik I
Basics of forming machines; correlations between forming processes and forming machines; mechanical press; hydraulic press; forces and work; tolerances; actual tendencies in forming technology; portfolioanalysis; tilting compensation; the system „die and pressing machine“.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: written
Credits: 3
Information Package 128
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Machines of Forming Technology II (Siegert)
Maschinen der Umformtechnik II
Actual items of forming technology; rapid prototyping; hydro-forming; thixoforming; PMmetal forming.
Semester:
Type:
SS
L
Hours per Week: 2
Prerequisites: --
Examination: oral
Credits: 3
Numerical Process Simulation in Forming Technologies I/II(Roll)
Numerische Prozeßsimulation in der Umformtechnik I/II
Plasticity-theory of plasticity; geometrical basics; forces and stress-conditions; strains, velocities; metallurgical description of forming processes; flow criterion’s; fundamental laws of material processes; word by forming; mathematical foundations for process calculations; slip-line theory; numerical iteration; determinations of errors and tolerances; finite element simulation.
Semester:
Type:
WS/SS
L
Hours per Week: 4
Prerequisites: --
Examination: oral
Credits: 6
Material Science in the Field of Forming Technology I/II (Pöhlandt)
Metallkundliche und werkstoffkundliche Grundlagen in der Umformtechnik I/II
Thermodynamic equilibrium; crystallographic systems; slip-systems; dislocations and other defects; special materials; annealing and recrystallisation; thermal treatment; physical and chemical properties; corrosion; rupture, cleavage, cracks; materials testing.
Semester:
Type:
WS/SS
L
Hours per Week:
Prerequisites:
4
--
Examination: oral
Credits: 6
Construction and Production of the Body in White I/II (Pollmann)
Karosserierohbaufertigungstechnik I/II
Strategically viewpoint in the automotive industry; concepts of car-bodies; materials for car-bodies. Joining: welding, laser welding, MIG- and TIG-welding, toxing, clinching, brazing. Logistic; system-concepts ; material-flow; future developments; production-safety; quality assurance.
Semester:
Type:
SS/WS
L
Hours per Week:
Prerequisites:
4
--
Examination: oral
Credits: 6
Computer Aided Construction and Manufacturing with the System CATIA I/II (Flegel)
Computerunterstütztes Konstruieren und Fertigen mit dem CAD-System CATIA I/II
Fundaments of CAD-construction. Introduction of the modules of CATIA: base, drafting,
3-D design, advanced surfaces, solids. Basis of NC-programming: NC-mill, NC-lathe.
CAD-ports to FE-simulation; practical exercises.
Semester:
Type:
SS/WS
L + E
Hours per Week:
Prerequisites:
2+2
--
Examination: oral
Credits: 6
Information Package 129
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Open Lectures for Sheet Metal Forming (Referents from institutes and industry)
Ringvorlesung Blechumformung
Tendencies in sheet metal forming, new developments in sheet and metal forming. Lectures from industry.
Open Lectures for Bulk Metal Forming (Referents from institutes and industry)
Ringvorlesung Massivumformung
Tendencies in bulk metal forming, new developments in bulk and metal forming. Lectures from industry.
Tribology (Föhl)
Tribologie -
Verschleißkunde see main course „Materials Testing, Materials Science and Strength of Materials“
Methods of Elastic-plastic Strength Calculation (Schmauder)
Methoden der elastisch-plastischen Festigkeitsberechnung see main course „Materials Testing, Materials Science and Strength of Materials“
Control Technology I (Pritschow)
Steuerungstechnik I see main course „Control Technology“
Basics of Machine Tools (Heisel)
Grundlagen der Werkzeugmaschinen see main course „Machine Tools“
3.35 Environmental Protection Engineering and Safety Technology
(Umweltschutz- und Sicherheitstechnik)
Institute of Nuclear Technology and Energy Systems (IKE)
Environmental Protection - Elementary Regulations/ Laws I/II (Nonnenmacher)
Umweltschutz – Gesetzliche Grundlagen
Development of environmental protection norms; organisation of environmental protection law; responsibilities; introduction into the law of immission protection; laws relating to water, waste, atom, chemistry, nature conservation; environmental liability; responsibility in environmental protection; environmental crime; factory regulations in environmental protection.
Semester:
Type:
SS/WS
L
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Technical Environmental Protection (Lohnert, Wehking, Baumbach)
Technischer Umweltschutz
Dispersion and effects of radioactive material to the environment: fundamentals of calculation of atmospheric dispersion of radionuclids; deposit of radionuclids on soil and plants;
Information Package 130
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering transfer mechanism soil/ plant -- animal/ humans (basics of calculations); units of radioactivity and permissible doses (inhalation, ingestion); order of magnitude calculations of the local radiation exposure after an assumed severe reactor accident. Combustion, waste gas, air pollution control. Solid waste and waste disposal. Noise sources and control.
Semester:
Type:
WS
L
Hours per Week: 3
Prerequisites: --
Examination: oral
Credits: 4,5
Fundamental Principles of Safety Technology I (Wehking)
Grundlagen der Sicherheitstechnik (Sicherheitstechnik I)
Introduction, regulations, reliability functions, determination of distributions, statistic, safety criterion, mutual endangering man - machine - environment, redundancy, likelihood, inspection/ repair, diversity principle, safety management, actions against single risks.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Reactor Safety (Lohnert)
Reaktorsicherheit
Fundamentals of nuclear fission, basic design of reactors. Potential risk of power reactors.
Safety strategies and function of safety technology (active and passive safety) to avoid accidents. Selected examples of safety analyses for Pressurised Water Reactors (PWR) and Boiling Water Reactors (BWR). Reliability-risk management, fault trees. Possible measures to reduce the failure hazards of future pressurised water reactors for the environment. Detailed presentation of the reactor-catastrophes of Windscale, TMI, Tschernobyl (how could it happen, what did one do to avoid such catastrophes for the future?). Selected examples of proposed "catastrophe-free" reactors. Final discussion: can mankind handle the responsibility to produce radioactive material?
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Radiation Protection (Pfister)
Strahlenschutz
A review on radiation exposure with regard to radiation protection in the fields of work, environment and medicine will be given. The physical and biological bases of radiation protection will be presented. The principles of optimisation with the help of organisation, radiation dose measurements and shielding of radiation sources will be discussed. The important regulatory frame work for radiation protection is presented as well as the large domain of radiation dose monitoring needed for protection. Starting from the radiation dose of natural origin including the Radon contribution within houses comparisons are made with occupational and medical dose contributions. Finally the firm knowledge of radiation risk at low and high doses is discussed in detail.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 131
Energy Tech./ Design & Manuf. Eng.
Information Package
Mechanical Engineering
Industrial Medicine and Safety Technology (Schultheiß, Link, Pfister)
Arbeitsmedizin und Sicherheitstechnik
The medical health service at work will be presented by doctors for occupational medicine.
The subjects are: occupational diseases, acute and chronic illness in regard to the working conditions, hearing loss caused by noise, health risks by metals and other dangerous substances, addiction diseases and work, screen work places. In addition, the strategy of industrial safety will be explained by safety engineers: occupational organisation in the plant, protection from accidents at machines, safe handling of dangerous substances, safety at transport, occupational protection from radiation.
Semester:
Type:
WS/SS
L + E
Hours per Week: 2+1
Prerequisites: --
Examination: oral
Credits: 4,5
Test of Compatibility with Environment (TCE) (Nobel)
Umweltverträglichkeitsprüfung
Legal fundamentals (TCElaw, regulations, ‘federal state law’); legal regulations concerned; course of TCE (frame of examination, documents/ records of project executing body, participation of the public); TCE-obligatory facilities (i.e. power plants, refineries, foundries, plants for treatment and utilisation of waste); contents of TCE; performance of
TCE in different licensing procedures.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Transport and Deposition of Air-borne Hurtful Materials (NN)
Transport und Deposition luftgetragener Schadstoffe
Principles of meteorology, prognostic and diagnostic calculation of the streaming field: mass-conserving, from general equations of motion. Calculation of close-to-earth streaming. Calculation of spreading out of tracer materials, Gauss-models, Monte-Carlo method, general transport equation, influence of air-chemical reactions, influence of the surface characteristics.
Semester:
Type:
WS
L
Hours per Week: 1
Prerequisites: --
Water Quality Management I/II (Rott)
Wassergütewirtschaft I/II
Examination: oral
Credits: 1,5
The water supply technology deals with the items of planning, design, construction, and operation of all plants providing fresh and usable water to communities and industry. This includes dimensioning and constructing of all buildings for water extraction, refining, storing, and distribution, such as fountains, filtration plants, hauling, aqueducts, storing and distributing networks. The lectures are presenting not only general principles, but practical examples, too, partly demonstrated by professional experts.
Semester:
Type:
WS/SS
L
Hours per Week:
Prerequisites:
1/2
--
Examination: oral
Credits: 4,5
132
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Technology of Thermal Waste Treatment (Seifert)
Technik der thermischen Abfallbehandlung
Waste management - introduction; legislative regulations; objectives and developments of thermal waste treatment; basic processes; waste incineration - comparison of the combustion systems -; pyrolysis/ gasification; combined processes; formation of pollutants and control mechanisms; energy recovery and flue gas treatment; process residues; ecological and economical comparisons.
Semester:
Type:
WS/SS
L
Hours per Week:
Prerequisites:
2/1
--
Examination: oral
Credits: 4,5
Amounts and Structure of Waste; Thermal Processing of Waste (Tabasaran)
Mengen und Zusam mensetzung der Abfälle; Thermische Abfallbehandlung;
Biologische Abfallbehandlung
Waste technology has recently become a topical one, it is dealing with planning, constructing and also with organisational and operational problems. Its aim is either to remove and/ or to use all kind of waste including mud from purification plants and industries in a most economical and ecological manner. The problems of organising waste collection and transport, design and setting up of waste disposal sites, waste compost and waste burning and further plants still being developed are also dealt with.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination:
Credits: oral
1,5
Safety Technology (Work Medicine) (Kern)
Sicherheitstechnik (Arbeitsmedizin)
An overview is given concerning a number of safety provisions/ regulations and the plant oriented as well as the general organisation of the safety of work. It is followed by the principles of the safety-focused design of technical products and the safe organisation of work. Moreover, particular safety-relevant problems (in-work transport and traffic, dangerous materials, electrical current, fire and explosives) are discussed.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Quality Assurance (Schimmer)
Qualitätssicherung
The QA-system according to ISO 9000-9004: TQM/Q-Management; Q-Planning (marketing, development, FMEA, production, procurement); Q-Controlling (QS-documentation,
SPC, failure analysis, correction measures); Q-Testing (WE-, in interim and final tests, audits, certification).
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 133
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Technology Assessment (Bullinger)
Technikfolgenabschätzung see main course „Technology Management“
Passenger Transportation Technology (Vogel)
Personen-
Fördertechnik see main course „Mechanical Handling“
Air Pollution Prevention (Baumbach)
Reinhaltung der Luft see main course „Power Plant and Combustion Technology“
Measurement and Analysis of Air Pollutants (Baumbach)
Messen und Analysieren von Luftverunreinigungen see main course „Power Plant and Combustion Technology“
Basics of Materials-handling Technology (Wehking)
Grundlagen der Fördertechnik see main course „Mechanical Handling“
Materials-handling Technology for the Disposal of Waste (Wehking)
Fördertechnik für die Entsorgung see main course „Mechanical Handling“
Motor Vehicle Engines and Environment (Bargende, Greiner)
Kraftfahrzeugantriebe und Umwelt see main course „Combustion and Internal Combustion Engines“
Technical Acoustics (Hübner)
Technische Akustik see main course „Thermal Turbomachinery“
Air Pollution Control at Work Places (Dittes, Bach)
Luftreinhaltung am Arbeitsplatz see main course „Energy Systems for Technical Building Appliances“
Knowledge Based Systems (KBS) in Safety- and Structural Mechanical Analysis
(Jovanovic)
Wissensbasierte Systeme in Sicherheits- und Strukturmechanikanalysen see main course „Materials Testing, Materials Science and Strength of Materials“
Information Package 134
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
3.36 Combustion and Internal Combustion Engines
(Verbrennung und Verbrennungsmotoren)
Institute of Combustion Technology (ITV) and
Institute of Internal Combustion Engines and Automotive Engineering (IVK)
Fundamentals of Combustion I/II (Maas)
Grundlagen t echnischer Verbrennungsvorgänge I/II
I) Fundamental phenomena, conservation equations, laminar combustion systems, thermodynamics, viscosity, diffusion and heat release, chemical reactions, detailed reaction mechanisms, laminar premixed and non-premixed flames, self-ignition, induced ignition, detonations.
II) 3-dim. Navier-Stokes equations of reacting flows, turbulent reacting flows, turbulent non-premixed flames, combustion of Diesel engines, turbulent premixed flames, combustion of Otto engines, engine knock, NO formation and reduction, soot formation, unburned hydrocarbons, flame extinction.
Semester:
Type:
WS/SS
L
Hours per Week:
Prerequisites:
2/2
--
Examination: oral
Credits: 6
Internal Combustion Engines I, II, III (Bargende)
Exercises to Internal Combustion Engines (Greiner)
Verbrennungsmotoren I, II und III
I) Definition; history; aims of development; basic characteristics; operating modes: spark-ignition engine (SI engine), compression ignition engine (Diesel engine); fourstroke principle; two-stroke-principle; power output; efficiency.
II) Combustion characteristic curve; comparison SI/ CI engine; fuels; improvement of exhaust-gas quality; reciprocating engine; cylinder arrangement; elements of chargecycle; engine block; gasoline and diesel injection systems.
III) Lubrication-oil circuit; cooling; mechanical supercharging; exhaust-gas supercharging; hydrogen engine; Stirling engine.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Calculation and Analysis of Internal-motor Processes (Bargende)
Berechnung und Analyse motorinterner Prozesse
Introduction and overview; initial values of high pressure calculation; caloric; heat transfer; pressure course analysis; process calculation for Otto engine; process calculation for DI
Diesel engine; load exchange calculation; summary.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: written
Credits: 3
Information Package 135
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Pollutant Formation and Reduction (Behrendt)
Entstehung und Minderung von Verbrennungsschadstoffen
Chemistry of combustion processes, NO formation (thermal NO, prompt NO, conversion of fuel nitrogen), primary NO reduction (staged combustion, recirculation, etc.), secondary methods for NO reduction (thermal DeNox, catalytic reduction), soot formation and reduction.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Laser-Diagnostics of Combustion Processes (Maly)
Laserdiagnostik als Hilfsmittel zur Lösung motorischer Verbrennungsprobleme
Laser-induced fluorescence, Raman-spectroscopy, coherent anti-stokes Raman spectroscopy (CARS), laser-doppler velocimetry, non-intrusive diagnostic methods.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Spray-Combustion (Maas)
Spray-Verbrennung
Conservation equations for two-phase flows, droplet combustion, spray formation, spray combustion.
Semester:
Type:
WS
L
Hours per Week: 1
Prerequisites: --
Chemistry of Combustion (Maas)
Examination: oral
Credits: 1,5
Chemie der Verbrennung
Time laws of chemical reactions; radical chain mechanisms; reaction mechanisms of hydrocarbons; analysis of reaction mechanisms (analysis of reaction paths, sensitivity analyses); simplification of reaction mechanisms (assumption of quasi-steady-state, partial balances, automatic simplification).
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Numerical Simulation of Combustion Processes (Schmidt)
Numerische Behandlung von Verbrennungsprozessen
Conservation equations for reacting flows, solution of stiff differential equation systems, discretisation techniques, adaptive methods, error control, simulation of one- and twodimensional combustion systems.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 136
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Ignition Processes (Dreizler)
Zündprozesse
Physico-chemical fundamentals, self ignition (homogenous ignition, ignition in static reactors), induced ignition (laser-induced ignition, spark ignition), explosions, detonations.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Combustion in Otto and Diesel Engines (Dreizler)
Verbrennung bei Otto- und Dieselmotoren
Description and comparison of combustion, ignition and mixture formation in Otto and
Diesel engines; exhaust behaviour of the combustion processes.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Statistical Description of Turbulent Reacting Flows (Maas)
Statistische Modelle turbulenter Flammen
Probability density functions, closure of the chemical source terms, chemistry-turbulence interaction, Monte-Carlo solution of the PDF transport equation.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Dynamics of Piston Engines I/II (N.N.)
Dynamik der Kolbenmaschinen I/II
Inertia forces and inertia moments of piston engines; mass balance; torsional vibrations; balance wheel.
Semester:
Type:
SS/WS
L + E
Hours per Week:
Prerequisites:
1/1+1
--
Examination: oral
Credits: 4,5
Test and Measuring Technique for Motor Vehicles II (Bargende, Scholz)
Kraftfahrzeug-Versuchs- und Meßtechnik II
Engine testing in research and development; measuring techniques; emission measurements; pressure indicator; temperature measurements at movable parts of an engine.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Exhaust Emissions of Internal Combustion Engines (Greiner)
Abgase von Verbrennungsmotoren
Mechanisms of exhaust-gas formation; influence of engine parameters; exhaust emission treatment.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 137
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Motor Vehicle Engines and Environment (Greiner)
Kraftfahrzeugantriebe und Umwelt
Traditional and alternative motor vehicle engines; development trends (environmental protection, fuel consumption); mixture formation; combustion; emission control and consumption reduction for SI and CI engines; stratified-charge-engine; cooling; lubrication; engine noise; auxiliaries.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Abrasion and Lubrication (Bartz)
Tribologie und Schmierungstechnik
(Anwendungen in Lagern, Getrieben und Motoren)
Friction and lubrication conditions; hydrodynamic lubrication; characteristics and production of lubricants; influence of additives; fundamentals of friction, abrasion, lubrication; lubrication of plain bearings; lubrication of rolling bearings; lubrication of gearboxes; synthetic lubricants; solid lubricants.
Semester:
Type:
SS
L
Hours per Week: 1
Prerequisites: --
Technical Acoustics (Hübner)
Technische Akustik see main course „Thermal Turbomachinery“
Examination: oral
Credits: 1,5
Machinery Acoustics A: Sound Radiation (Hübner)
Maschinenakustik A: Schallabstrahlung see main course „Thermal Turbomachinery“
Machinery Acoustics B: Structureborne Sound (Hübner)
Maschinenakustik B: Körperschall see main course „Thermal Turbomachinery“
Vehicle Electronics (Gast)
Elektronik im Kraftfahrzeug see main course „Vehicle Engineering“
Finite Element Method in Statics and Dynamics (Gaul)
Methode der finiten Elemente in Statik und Dynamik see main course „Engineering Mechanics“
Information Package 138
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
3.37 Chemical Process Technology
(Chemische Verfahrenstechnik)
Institute of Chemical Process Engineering (ICVT)
Chemical Reaction Engineering I (Eigenberger)
Chemische Reaktionstechnik I
Introduction to design and operation of chemical reactors. Stoichiometrie, thermodynamics and kinetics of chemical reactions. Fundamentals of reactor modelling and design: stirred tank reactors, tubular and fixed-bed reactors; non-ideal reactor behaviour.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Physico-Chemical Processes I (Eigenberger)
Physikalisch-chemische Verfahren I
Introduction to the modelling of physico-chemical processes including thermodynamics of multi-component systems; membrane separation processes: reverse osmosis, pervaporation, gas separation; gas-phase adsorption: temperature and pressure swing adsorption; electrochemical processes: ion exchange, electrolysis, electrodialysis and fuel cells.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Chemical Reaction Engineering II (Eigenberger)
Chemische Reaktionstechnik II
Modelling of multi-phase reactors; reactor dynamics: catalytic gas-phase reactions. Single pellet and two phase model of a fixed-bed reactor. Mass transfer and chemical reaction in gas-liquid reactors (film and surface-renewal models); hydrodynamics of gas-liquid (loop) reactors.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Membrane Technology (Eigenberger, Kerres)
Membrantechnik
Fundamentals of the most important membrane processes and their applications with emphasis on gas separation, pervaporation and electro-physical membrane processes with specific transport characteristics. Examples of applications in the field of environmental engineering and biotechnology.
Semester:
Type:
SS
L
Hours per Week: 2
Prerequisites: --
Examination: oral
Credits: 3
Information Package 139
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Drying Technology (Kottke)
Trocknungstechnik
Sorption and transport of moisture in materials, heat and mass transfer between material and its environment, drying phases, sorption characteristics, drying progress, different drier types, sizing and operation of dryers.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Apparatus Construction and Process Plant Design (Merten)
Apparatewesen und Anlagetechnik
The task of Apparatus Construction and Process Plant Design is the creation of technical equipment and systems for chemical, biological and physical processes in order to recover, to produce or to remove materials and products. The in-depth course consists of lectures and seminars in Apparatus Construction, Process Plant Design, Mechanical, Thermal, Chemical and Biochemical Process Engineering, Computer Science and Environmental Engineering. The purpose of these studies is to introduce students to exemplary technical problems and to apply their obtained knowledge to project, design and optimise process plants.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Computer Aided Design in Apparatus Construction (Computer Lab Course) (Merten)
CAD in der Apparatekonstruktion
Introduction and tutoring in constructional design and drawing of chemical apparatus. Use of CAD: general and branch specific programmes. Interfaces to FEM and CAM programmes. Team exercise with CAD programmes Pro/ENGINEER. Overview on the basic commands using for example stirred tank reactor. Use of CAD software for individual design of a pressure vessel. Prerequisite: Pro/ENGINEER - compact seminar (a preparatory seminar is also offered).
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Computer Aided Strength Analysis of Apparatus and Apparatus Parts (Merten)
Rechnergestützte Festigkeitsanalyse von Apparaten und Apparatebauteilen
Overview on strength calculation of chemical apparatus. Validity range of calculation rules.
Necessity and use of part-independent calculation methods. Finite Element Method: basics, results evaluation, optimisation. Team exercise with FEM programme ANSYS: strength calculation methodology of mechanical and thermal stressed apparatus parts.
Use of FEM software for individual strength calculation of a pressure vessel.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Information Package 140
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Numerical Methods in Engineering (Sorescu)
Numerische Methoden der Verfahrenstechnik
Systematic overview on numerical algorithms. The aim is to judge advantages and disadvantages of available numerical algorithms and their use in chemical engineering problems. Examples covered are solvers for linear and non-linear equation systems, for approximation and interpolation, for integration and differentiation, for initial value differential equations, algebraic-differential systems, partial differential equations of convection and diffusion type and for parameter optimisation.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+2
--
Examination: oral
Credits: 6
Solids Processes (Wintermantel)
Feststoffverfahren
Introduction, analysis and optimisation of industrial solids processes including crystallisation/ precipitation, filtration, drying, ancillary processing. Considered are the basics and technical realisation of crystallisation and precipitation; integration of crystallisation and precipitation into a chemical process; interpretation and evaluation of the total process.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
3.38 Mechanical Process Engineering
(Mechanische Verfahrenstechnik)
Institute of Mechanical Process Engineering (IMVT)
Fundamentals of Mechanical Process Engineering (Piesche)
Grundlagen der Mechanischen Verfahrenstechnik
Characterisation of coarsely dispersed systems, adhesion mechanisms in coarsely dispersed systems, particle size measurement, resistance behaviour of particles in flow, flow through packing, flow mechanisms of turbulent layers, design of pneumatic conveying plants, separation process and characterisation of separation, mixing processes (mixing of disperse and nondisperse mediums), processes of crushing, agglomeration processes, fluid energy machines.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Multiphase Flow (Piesche)
Mehrphasenströmung
Process of transportation of gas-fluid-streams, critical mass flows, bubble dynamics, generation and motion of bubbles, resistance behaviour of solid particles, pneumatic transport of solid particles, fluidised bed, measurement techniques.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Information Package 141
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Crushing, Dust Separation Technique and Emulsions Technique (Piesche)
Zerkleinerung-
, Zerstäubungs- und Emulgiertechnik
Physical fundamentals of crushing technique, apparatuses for crushing of coarse, fine and finest particles, basics of droplet building, laminar and turbulent disintegration of jets and laminae, atomisation equipment (spray diffusers, rotary sprayer, ultrasonic atomiser, etc.), droplet size measurement, production, stabilisation and treatment of emulsions, emulsi- fiers.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Machines and Apparatus in Separation Technology (Piesche)
Maschinen und Apparate der Trenntechnik
Solid fluid separation: sedimentation in the gravitational field, filtration, centrifuges, hydrocyclones, flotation. Dust separation: gas cyclones, wet purification, filter apparatuses, electrical dust collectors. Description of design and apparatuses used in practice of the mentioned topics, several examples of separation technology.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Modelling and Simulation of Flow Mechanisms (Piesche)
Modellbildung und Simulation von Strömungsvorgängen
Basic equations of fluid dynamics, classification of differential equations of 2 nd order, special solution methods of differential equations of 2 nd order, (characteristic and separation methods), modelling of turbulent flows, description of multiphase flows with population balances, numerical methods for the solution of flow equations (grid generation, Finite
Volume Method (FVM), solution algorithms), survey of commercial software.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Flow and Particle Measurement (Piesche)
Strömungs- und Partikelmessung
Lecture items are model laws of flow experiments, experimental plants, measurement of the flow velocity in magnitude and direction (mechanical, pneumatic, electrical and magnetic processes); pressure measurement; gas temperature measurement; measurement of turbulence; visualisation of flow; optical measuring technique (shade, schlieren photography, interference method, CDA/ procedure, tomography); characterisation of single particles; presentation and mathematical analysis of particle size distribution, e.g. sedimentation, diffraction, scattered light, counting procedures, sieve analysis, PDA method.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 142
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Separation Technique for Environmental Protection and Dressing (Goesele)
Separationstechnik für Umweltschutz und -pflege
Lecture items are preparation of dressing, e.g. transportation, recovery and storage; dressing itself, e.g. crashing and classification; sorting by sinking, separation or wash technology; theory and practice of flotation and magnetic separation; electrostatic dressing; explanation of flow sheets of different plants; calculation and designing examples of plants.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Ring Lecture „Environmental Process Engineering“
Ringvorlesung “Umweltverfahrenstechnik”
Waste gas purifying, waste water purifying, extraction of useful substances of waste water, thermal treatment of waste, electro membranes, global balancing, degradable polymers.
Air Pollution Prevention (Baumbach)
Reinhaltung der Luft see main course „Power Plant and Combustion Technology“
Fluid Sealing Technology (Haas)
Dichtungstechnik see main course „Design Technology“
Materials-handling Technology for the Disposal of Waste (Wehking)
Fördertechnik für die Entsorgung see main course „Mechanical Handling and Conveying“
Tribology (Föhl)
Tribologie und Verschleißkunde see main course „Materials Testing, Materials Science and Strength of Materials“
Manufacturing Technologies of Ceramic Components (Gadow)
Fertigungstechnik keramischer Bauteile see main course „Manufacturing Technology of Ceramic Components, Composites and
Surface“
3.39 Thermal Engineering and Refrigeration
(Wärme- und Kältetechnik)
Institute of Thermodynamics and Thermal Engineering (ITW)
Heat and Mass Transfer (Hahne or Hasse)
Wärme- und Stoffübertragung
Introduction; technical applications; heat conduction and diffusion; convective heat and
Information Package 143
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering mass transfer: single phase flow; radiation; convective heat and mass transfer: flow with phase change.
Semester:
Type:
WS
L + E
Hours per Week:
Prerequisites:
3+1
--
Examination: written
Credits: 6
Technical Thermodynamics III (Sohns)
Technische Thermodynamik III
Thermodynamic properties of matter in different states of aggregation: the perfect gas, real vapours and fluids, solids. Thermal properties: vapour pressure, density, critical data, heat of evaporation, specific heat. Transport properties: transport equations and nondimensional numbers, viscosity, thermal conductivity, diffusion coefficient.
Semester:
Type:
WS
L + E
Hours per Week: 3+1
Prerequisites: --
Selected Issues of Heat Transfer (Sohns)
Sonderfragen der Wärmeübertragung
Examination: oral
Credits: 6
Overall heat transfer, heat transfer through finned surfaces. Electrical analogy methods, convective heat transfer in turbulent flow.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
1
--
Efficient Energy Conversion (Hahne, Spindler)
Optimale Energiewandlung
Examination: oral
Credits: 1,5
Maximum attainable work, exergy of fuels, exergy losses during combustion, exergetic investigation of a compression heat pump, exergetic efficiencies of energy conversion processes, steam power plant, gas turbine, combined gas and steam cycle.
Semester:
Type:
WS
L
Hours per Week: 1
Prerequisites: --
Examination: oral
Credits: 1,5
Calculation of Heat Exchangers (Hahne, Sohns)
Berechnung von Wärmeübertragern
Recuperative heat exchangers: kinds and types of construction, fundamentals of calculation, basic flow arrangements, overall heat transfer, calculation of the log mean temperature difference and the temperature distribution, recuperator analysis using NTU-charts, heat transfer and pressure drop, effect of heat losses and fouling, finned surfaces. Regenerative heat exchangers: operation, fundamentals of calculation, temperature distribution and overall heat transfer, analysis, construction remarks.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
2+1
--
Examination: oral
Credits: 4,5
Information Package 144
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Heat Pumps (Sohns)
Wärmepumpen
Range of applications for heat pumps, heat sources, fundamentals, processes for compression- and absorption heat pumps, steam jet heat pump, thermoelectric heat pump, performance characterisation of heat pumps, working fluids, compression heat pump, compressor drives, compressors, heat exchangers, throttles.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Refrigeration - Fundamentals and Industrial Application (Lotz)
Kältetechnik – Grundlagen und industrielle Anwendung
Industrial methods of refrigeration: refrigeration systems in food industry, refrigeration systems in process engineering, refrigeration plants for air conditioning, low temperature plants (decomposition of gas mixtures), special applications and topics of refrigeration.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Construction of Heat Exchangers (Reinhart)
Kons truktion von Wärmeübertragern
Types of construction and selection criterions, construction of shell-and-tube and parallel plate heat exchangers, devices for refrigeration, cooling towers, construction materials and corrosion protection, strength and acceptance specification.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
3.40 Machine Tools
(Werkzeugmaschinen)
Institute of Machine Tools (IFW)
Basics of Machine Tools (Heisel)
Grundlagen der Werkzeugmaschinen
Classification of machine tools; basics of machine tool design; basics of metal cutting; components and drives for machine tools; lathes, special turning machines; planing, splicing, broaching; sawing, filing, rubbing; punching; grinding, honing, lapping; electrical discharge machining, laser and ion beam machining, water jet machining; gear manufacturing; thread manufacturing; woodworking machines, electric tools; revolving machines, transfer lines; manufacturing cells; flexible manufacturing systems, CIM factories; basics of system planning and design.
Semester:
Type:
WS
L
Hours per Week: 4
Prerequisites: --
Examination: written
Credits: 6
Information Package 145
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Design of Machine Tools (Heisel)
Konstruieren von Werkzeugmaschinen
Basics and principles of machine tool design; practice of machine tool design; economic designing; standardisation; design according to requirements for casting, for welding, for manufacturing; communication problems for the design of machine tools; machine bases, guides, main spindles; the system machine tool and periphery; monitoring, quality control.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Behaviour of Machine Tools (Heisel)
Verhalten von Werkzeugmaschinen
Static behaviour: valuation of machine tools, acceptance code for machine tools, static stiffness, positioning accuracy, dislocations and inclinations, roundness test. Dynamic behaviour: basics of single mass vibrations, valuation of dynamic behaviour in respect to frequency response function of displacement, induced and self-induced vibrations, active and passive isolation of machine tools, optimisation of dynamic behaviour. Thermal behaviour: internal and external heat sources, calculation and compensation possibilities (by design, by control), thermal measurement and testing processes.
Semester:
Type:
SS
L + E
Hours per Week:
Prerequisites:
1+1
--
Examination: oral
Credits: 3
Metal Cutting (Rothmund)
Zerspanungslehre
Basics of metal cutting: nomenclature at the tool, cutting conditions. Machining: tools, cutting materials, modern trends, wear and tool life, cooling and lubricating liquids, temperature at the cutting edge.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Precision Machining (Hübsch)
Spanende und abtragende Verfahren der Feinbearbeitung
Precision demand of the fine machining - grinding - honing - precision machining with pulverulent abrasives - removing processes.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
1
--
Examination: oral
Credits: 1,5
Information Package 146
Energy Tech./ Design & Manuf. Eng. Mechanical Engineering
Basics and Methods of Woodworking (Tröger)
Grundlagen und Verfahren der Holzbearbeitung
Basic definitions; material properties of wood; peculiarity of woodworking; basic processes of woodworking; forces at the cutting edge, wear, power requirement; typical tools; grinding of wood and derived timber products; non-cutting processes.
Semester:
Type:
WS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Machines and Systems of Woodworking (Dietz)
Maschinen und Anlagen der Holzbearbeitung
Exploitation and treatment of timber wood; drying of wood; timber mill technology; further treatment and finishing of timber mill products; machining of furniture and panels; producing of veneering and plywood; producing of derived timber products; machining of plastics, stone and glass.
Semester:
Type:
SS
L
Hours per Week:
Prerequisites:
2
--
Examination: oral
Credits: 3
Information Package 147