Bluetooth Watch Instructions Thank you for choosing our watch devices. You can completely understand the method of using it and realize its perfect function and concise operating methods by reading this manual. This device is used to adapate to the brand of intelligent machines,which can synchronize phonebook and provide a variety of useful features and services to facilitate operating the smart machine in your work and leisure activities. The Company reserves the right to amend this manual in the case of any prior notice ,and without further notice. This watch is SIM+BT double talk smart Watch IPHONE USER: When you get the watch,and instal“smartblue”in you phone, And the watch can display the message and other capion which pisplay on the top of your phone’s.screen. The method of IPHONE get the app:Enter the APP STORE of the phone and then search the app “smartblue” ANDRIOD USER: When you get the watch , and install “ Smartwatch.apk” program on the smart phone, realize SMS, LINE, Facebook, Instugrate,Facebook Message, QQ, weather forecasts and other instant messaging reminders. APK Access mode 1:Download by using Smart phone to scan the two-dimensional code below APK Access mode 2:Download from Web address IP Address: www.myuwatch.com/Smart-Watch.apk After installing “Smartwatch.apk”, and smart phone connect to watch ,First open Bluetooth function of your smart phone and watch , phone will search watch Equipment name and initiate a connection,next smart phone will send "Bluetooth pairing request" and then you press "confirm" for pairing ,After pairing watch will prompt "**(Connected)" ,About 5 seconds later the watch will prompt "sync date&time with remote" (functions of synchronousing date and time required to install " Smartwatch.apk" in the smart phone ),while there is a " " icon in the standby interface ,which indicates a successful connection between your smartphone and watch, After a successful connection you can operate watch according to the following steps IPhone installation "SmartBlue.app" is complete, open the phone SmartBlue login screen will pop up, click the registration, fill in the phone number and password and other relevant information into the main interface motion mode, tap the Bluetooth icon and search again appears Bluetooth name watches and then click, it will pop up "Bluetooth pairing request" point "pairing", and then watch the Bluetooth icon at the top of the main screen will turn green, representing the BLE connection is successful, which can push the QQ, WeChat, text messages and other information to the watch. Then return to the main phone screen, enter the Bluetooth settings menu, search and watch Bluetooth connection, display "Connected" watch after the end of the camera icon will appear, and the phone on the phone already synced to watches, remote camera and find Mobile. Method of operations Left on the side buttons:Enter the main menu button and the Enter key Left under the side buttons: return key Right side of the key: Press to switch, short press to return to the standby screen TP Screen key: Enter key TP gestures: left to right for the return slip, slide from right to left for confirmation TP: Tap the screen to confirm(in the ringing vibration, sleep monitoring, the remote notification interface for the next turn key) Note: SIM card does not support hot plug. ※Introduce the main menu:According to watch the main function is divided into 3 page First page:Bluetooth, Messaging, Dialer, Call log, Camera, Alarm, Music, Settings ,Phonebook; Second page: Notifier, FindPhone, Anti lost, Pedometer, Ecompass, Ringtone, Sedentar reminder, Heart Rate, Sleep monitor Third page:, Browser, QQ , powersave, TTS, Calculator, Calendar, Stopwatch , WeChat , menuStyle Function information: ● Bluetooth:Open this function will see the following menu 1)BT dialer ~ search and a matching connection with bluetooth devices 2)Bluetooth settings 1. Power: Can turn on or off Bluetooth (usually not recommended to close) 2. Visibility: Can set the watch can be searched Bluetooth 3. My name: Bluetooth name watches 4. Advanced: Can set the sound path is reached watches or stay in the mobile phone side, and can see the Bluetooth device address 5. Anti lost: After connecting to turn this feature off and set a reminder is ringing or vibration 3)Anti lost ~ When this feature is turned after the watch and the watch will vibrate the phone prompts the user to disconnect ●Messaging: Open this function will see the following menu 1) Write message~SMS or MMS can be established (watch the card can be used, under the Bluetooth connection status is not available) 2) Inbox~Watch the display text messages and Bluetooth synchronization information (IPhone can not synchronize information can only push information) 3) Drafts~Show watch saved draft message and Bluetooth Push over the draft Information (IPhone does not support this feature) 4) Outbox~Short message display watch was not sent short message and Bluetooth synchronization is not sent out (IPhone does not support this feature) 5) Sent messages~Display text messages and Bluetooth Watch has sent a text message sent sync (IPhone does not support this feature) 6) Message settings~Can set whether to save sent messages SMS, MMS settings and services in general whether the information received and loaded ●dialer: Under the card status can be directly after dialing, the connection can be via Bluetooth Dialer ●Call log: Open this function will see the following menu 1)Missed calls ~ Display watches and cell phones missed calls ,At the same time can call the corresponding contact 2)Dialed calls ~ Display watches and cell phones dialed call,At the same time can call the corresponding contact 3)Received calls ~ D Display watches and cell phones received call,At the same time can call the corresponding contact 4)All calls ~ Display Watch and phone call records show all telephone ●Camera:Remote on/off mobile phone camera press confirm to complete pictures (Iphone To turn the camera to the remote camera phone) ●Alarm:customize 5 alarms. ●Music:Can control the music playing in the mobile phone ●Settings:Open this function will see the following menu 1) Language ~ Can choose language. 2) TimeDate 1. Set home city: Can set the time zone 2. Set time / date: Can set the time and date 3. Set format: Time can be set 12-hour and 24-hour format, date can be set date, day of the sun and moon, the moon 4. Update with time zone: Open according to the time zone update (This feature card is available) 3) LCD backlight~ Optional backlight standby time 4)Units Setup~ Can set the pedometer units to metric units or imperial units 5)About watch ~ Display mobile phone software version information. 6)Auto test~ Internet service can be tested and SIM card applications testing 7)Restore settings~ Watch all settings and memory can be cleared ●Phonebook: The card can be displayed on the watch saved contacts ,Watches and mobile phones will connect the machine to display the phone contacts (which can display 1000) ●Notifier:Can query the QQ/ Wechat and other timely news, Android phone will need to install the phone side "Smartwatch.apk", IPhone is installed in the mobile phone side "SmartBlue.app" application after use. ●Find phone: Click to go to look for connected mobile phone, IPhone is open the music player on your phone. ●Anti lost:Watch wil send alarm after leaving the mobile phone a certain distance. ●Pedometer:Calculation of the walking distance of time (time, minutes, seconds) and the number of kilometers (km),Open this function will see the following menu. 1)Pedometer ~ In the menu and press the left software trigger start step-by-step, the total distance (km), Kaluri (kcal) calculation. 2)Step Setting(CM) ~ According to height ratio setting step distance 3)Weight setting(KG) ~ According to its own weight set 4)Clear History~Clear records of history ●Ecompass: Following the picture on the watch to move the watch at horizontal direction in order to adjusting when you use this function at first time. ●Ringtone:For different state set ringtones,Open this function will see the following menu. 1)Mute 2)Vibration 3)Ring1 4)Ring2 5)Ring3 ●Sedentary reminder: You can choose to turn this feature on or close to sedentary reminder and can set how long a reminder ●Heart Rate: Click to enter real-time monitoring of the heartbeat frequency ●Sleep Monitor:Open this operation to monitor the quality of sleep ●Browser: Open to enter the URL access (This feature needs to card use) ●QQ: QQ can log on Watch (This feature needs to card use) ●Powersave: Open this function the use of the time of the watch will be more durable ●TTS: Open to read the menu, calls broadcast, the whole point of time, reading text messages and key broadcast ●Calculator: Turn this feature allows simple data calculation ●Calendar: Open to view calendar ●Stopwatch: Open this function can be timing ●WeChat: WeChat can be registered in the watch (This feature needs to card use) ●Menustyle: Enter to switch menu style Tip:This product's battery is non-removable.And maybe the product cann't power on when it is idle for more than a month on account of the wastage of itself.Please charge your device.