Do No
BS 3669
BS 5775 : Part 0
BS 5775 : Part 1
BS 9610
BS 5555
BS 5775 : Part 2
BS 5775 : Part 3
BS 5775 : Part 4
BS 5775 : Part 5
BS 5775 : Part 6
BS 5775 : Part 7
BS 5775 : Part 8
BS 5775 : Part 9
BS 5775 : Part 12
BS 5775 : Part 13
BS 6430
PD 6430/1
BS 5775 : Part 10
Title
Recommendations for the selection,
formation and definition of technical terms
Specification for quantities, units and
symbols -- General principles
Specification for quantities, units and
symbols -- Space and time
Specification for quartz crystal units of
assessed quality : generic data and methods
of test
Specification for SI units and
recommendations for the use of their
multiples and of certain other units
Specification for quantities, units and
symbols -- Periodic and related phenomena
Specification for quantities, units and
symbols -- Mechanics
Specification for quantities, units and
symbols -- Heat
Specification for quantities, units and
symbols -- Electricity and magnetism
Specification for quantities, units and
symbols -- Light and related
electromagnetic radiations
Specification for quantities, units and
symbols -- Acoustics
Specification for quantities, units and
symbols -- Physical chemistry and
molecular physics
Specification for quantities, units and
symbols -- Atomic and nuclear physics
Specification for quantities, units and
symbols -- Characteristic numbers
Specification for quantities, units and
symbols -- Solid state physics
Method for representing SI and other units
in information processing systems with
limited character sets
Extract (appendices A and B) from PD
6430 : The adoption of the metric system in
the marine industry : report, basic
programme and guide. Units of the SI, their
application and use in the marine industry
Specification for quantities, units and
symbols -- Nuclear reactions and ionizing
radiations
BS 5775 : Part 11
BS 6911 : Part 7
BS 3521 : Part 3
BS 4058
BS 3510
BS 5499 : Part 2
BS 5499 : Part 3
BS 6034
BS 7477
BS 376 : Part 1
BS 376 : Part 2
BS 1553 : Part 1
BS 1553 : Part 2
BS 1553 : Part 3
BS 3641 : Part 1
BS 3641 : Part 2
BS 3641 : Part 3
BS 3738 : Part 2
Specification for quantities, units and
symbols -- Mathematical signs and
symbols for use in physical sciences and
technology
Testing earth-moving machinery -- Testing
of earth-moving machinery. Specification
for units of measurement and tolerances
Terms relating to ophthalmic lenses and
spectacle frames Glossary of terms and
symbols relating to contact lenses
Specification for data processing flow chart
symbols, rules and conventions
Specification for a basic symbol to denote
the actual or potential presence of ionizing
radiation
Fire safety signs, notices and graphic
symbols -- Specification for self-luminous
fire safety signs
Fire safety signs, notices and graphic
symbols -- Specification for internallyilluminated fire safety signs
Specification for public information
symbols
Guide for general principles for the
creation of graphical symbols for use on
equipment
Railway signaling symbols -- Schematic
symbols
Railway signaling symbols -- Wiring
symbols and written circuits
Specification for graphical symbols for
general engineering -- Piping systems and
plant
Specification for graphical symbols for
general engineering -- Graphical symbols
for power generating plant
Specification for graphical symbols for
general engineering -- Graphical symbols
for compressing plant
Symbols for machine tools General
symbols
Symbols for machine tools Specification
for numerical control symbols
Symbols for machine tools Additional
general symbols
Dictation equipment -- Specification for
BS 4999:Part 103
BS 5829
BS 6913 : Part 8
BS 6913 : Part 9
BS 6914 : Part 1
BS 6914 : Part 2
BS 6914 : Part 3
BS 89 PART 3
BS 469
BS 6914 : Part 6
BS 7153
BS 7324
BS 7519
BS 7712
symbols
General requirements for rotating electrical
machines -- Specification for symbols
Specification for control symbols for
powered industrial trucks
Operation and maintenance of earthmoving machinery -- Specification for
common symbols for operator controls and
other displays
Operation and maintenance of earthmoving machinery -- Specification for
specific symbols for machines, equipment
and accessories
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Glossary of terms for basic
types of earth-moving machinery
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Glossary of terms for base
machine
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Glossary of terms for
equipment
1990 Direct Acting Indicating Analogue
Electrical Measuring Instruments and Their
Accessories Part 3: Specification for
Requirements for Wattmeters and
Varmeters (E)
1995 Corr 1 Railway Signalling Lamps
CORR 13457: January 18, 2002; (Q)
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Terminology for selfpropelled crawler and wheel tractors and
their equipment
Guide for computer system configuration
diagram (symbols and conventions)
Guide to graphical symbols for use on
equipment
Mechanical vibration. Symbols for
balancing and associated instrumentation
Respiratory therapy equipment -Specification for graphical symbols for
reciprocating internal combustion engines
BS 6914 : Part 7
BS 6914 : Part 8
BS AU 206 : Part 2
PD 6578
BS EN ISO 7287
BS EN 23758
BS EN 27286
BS EN 60387
BS 3502 : Part 1
BS 3502 : Part 3
BS 3553
BS 3939 : Part 1
BS 3939 : Part 11
BS 3939 : Part 12
BS 5543
BS 5676 : Addendum No. 1
DD 214
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Vocabulary, symbols and
units for machine performance
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Terminology and commercial
specifications for hydraulic excavators
Diagnostic system for road vehicles -Specification for graphical symbols for
diagnostic testers
Guide to British, European and
international graphical symbols, for use on
equipment, for safety and fire safety, and
for public information, in relation to ISO
7000 and IEC 417
Graphical symbols for thermal cutting
equipment
Textiles. Care labelling code using symbols
Graphical symbols for resistance welding
equipment
Specification for symbols for alternatingcurrent electricity meters
Schedule for symbols for plastics
Symbols for plastics and rubber materials
Schedule for symbols for compounding
ingredients
Specification for graphical symbols for
coal preparation plant flowsheets
Graphical symbols for electrical power,
telecommunications and electronics
diagrams -- General information, general
index
Graphical symbols for electrical power,
telecommunications and electronics
diagrams -- Architectural and topographical
installation plans and diagrams
Graphical symbols for electrical power,
telecommunications and electronics
diagrams -- Guide for binary logic elements
Vacuum technology - graphical symbols
Vocabulary for reciprocating internal
combustion engines. Symbols
Designation system for steel : additional
symbols for steel names (ECISS
Information Circular 10)
BS 2856
BS 3934 : Part 1
BS 3934 : Part 3
BS 3934 : Part 2
BS 3934 : Part 10
BS 4210 : Part 1
BS 4210 : Part 3
BS 5536
BS 3934 : Part 6
BS 6342
BS EN ISO 8826-1
BS 308 : Part 1
BS 308 : Part 2
BS 308 : Part 3
BS 1192 : Part 4
BS 5070:Part 1
BS 7581
PP 7308
Precise conversion of inch and metric sizes
on engineering drawings
Mechanical standardization of
semiconductor devices -Recommendations for the preparation of
drawings of semiconductor devices
Mechanical standardization of
semiconductor devices -Recommendations for the preparation of
outline drawings of integrated circuits
Mechanical standardization of
semiconductor devices -- Schedule of
international drawings giving dimensions
Mechanical standardization of
semiconductor devices -- Schedule of UK
national drawings giving dimensions
Specification for 35 mm microcopying of
technical drawings -- Operating procedures
Specification for 35 mm microcopying of
technical drawings -- Unitized microfilm
carriers
Recommendations for preparation of
technical drawings for microfilming
Mechanical standardization of
semiconductor devices -- Specification for
the preparation of outline drawings of
surface mounted semiconductor device
packages
Specification for 105 mm microcopying of
technical drawings (single image, A6 size)
Techical drawings. Rolling bearings -General simplified representation
Engineering drawing practice -Recommendations for general principles
Engineering drawing practice -Recommendations for dimensioning and
tolerancing of size
Engineering drawing practice -Recommendations for geometrical
tolerancing
Construction drawing practice -Recommendations for landscape drawings
Engineering diagram drawing practice -Recommendations for general principles
Guide to presentation of tables and graphs
Engineering drawing practice for schools
BS EN ISO 1660
BS EN ISO 5455
BS EN ISO 6433
BS EN ISO 7083
BS 7774
BS 594-1
BS 4821
BS 4971:Part 1
BS 4971:Part 2
BS 5332
BS 5408
BS 5454
BS 5513
BS 5699 : Part 1
BS 5699 : Part 2
BS 5723
BS 5848
BS 5999
and colleges
Technical drawings. Dimensioning and
tolerancing of profiles
Technical drawings. Scales
Technical drawings. Item references
Technical drawings. Symbols for
geometrical tolerancing. Proportions and
dimensions
Threaded fasteners. Axial load fatigue
testing. Test methods and evaluation of
results
1992 Amd 2 Hot Rolled Asphalt for Roads
and Other Paved Areas - Part 1:
Specification for Constituent Materials and
Asphalt Mixtures AMD 13529: December
21, 2001; (R)
Recommendations for the presentation of
theses and dissertations
Recommendations for repair and allied
processes for the conservation of
documents -- Recommendations for
treatment of sheets, membranes and seals
Recommendations for repair and allied
processes for the conservation of
documents -- Archival binding
Specification for data elements for the
generation and exchange of serials records
Glossary of documentation terms
Recommendations for storage and
exhibition of archival documents
Specification for 35 mm microcopying of
newspaper cuttings on A6 microfiche
Processed photographic film for archival
records -- Specifications for silver-gelatin
type on cellulose ester base
Processed photographic film for archival
records -- Specifications for silver-gelatin
type on poly(ethylene terephthalate) base
Guide to establishment and development of
monolingual thesauri
Specification for numbering of divisions
and subdivisions in written documents
(point-numbering)
Specification for serials holdings
statements for libraries and documentation
centres
BS 6131
BS 6313
BS 6371
BS 6478
BS 6529
BS 6627
BS 6723
BS 7124: Part 1
BS 7187
BS 7451
BS ISO 832
BS ISO 4087
BS ISO 8459-2
BS ISO 8459-3
BS ISO 9230
BS ISO 9706
BS ISO 10162
BS ISO 10163-1
Glossary of terms relating to household
sewing machines
Specification for 35 mm microcopying of
serials
Recommendations for citation of
unpublished documents
Guide to filing bibliographic information in
libraries and documentation
Recommendations for examining
documents, determining their subjects and
selecting indexing terms
Recommendations for presentation of
headers for microfiche of monographs and
serials
Guide to establishment and development of
multilingual thesauri
Bibliographic data element directory -Specification for interloan applications
Specification for code for bibliographic
identification (biblid) of contributions in
serials and books
Specification for archival quality
bookbinding leather
Information and documentation.
Bibliographic description and references.
Rules for the abbreviation of bibliographic
terms
Micrographics. Microfilming of
newspapers for archival purposes on 35
mm microfilm
Information and documentation.
Bibliographic data element directory -Acquisitions applications
Information and documentation.
Bibliographic data element directory -Information retrieval applications
Information and documentation.
Determination of price indexes for books
and serials purchased by libraries
Information and documentation. Paper for
documents. Requirements for permanence
Information and documentation. Open
systems interconnection. Search and
retrieve application service definition
Information and documentation. Open
systems interconnection. Search and
BS 4462
BS 4811
BS 4884 : Part 1
BS 4884 : Part 2
BS 4899:Part 1
BS 5401
BS 6228
BS MA 20
BS ISO 8439
BS 4148
BS 5261 : Part 1
BS 5261 : Part 2
BS 5261 : Part 3
BS 5641
BS 6738
BS 6321
BS 6601
BS 6695
retrieve application protocol specification - Protocol specification
Guide for the preparation of technical sales
literature for measuring instruments and
process control equipment
Specification for the presentation of
research and development reports
Technical manuals -- Specification for
presentation of essential information
Technical manuals -- Guide to content
Guide to user's requirements for technical
manuals (based on the principles of BS
4884) -- Content
Guide to information content and
presentation of operators' manuals provided
for tractors and machinery for agriculture
and forestry
Guide to format and content of manuals on
operation and maintenance for earthmoving machinery
Specification for presentation of ships'
cargo gear particulars
Forms design. Basic layout
Specification for abbreviation of title words
and titles of publications
Copy preparation and proof correction -Recommendations for preparation of
typescript copy for printing
Copy preparation and proof correction -Specification for typographic requirements,
marks for copy preparation and proof
correction, proofing procedure
Copy preparation and proof correction -Specification for marks for mathematical
copy preparation and mathematical proof
correction and their uses
Recommendations for loose-leaf
publications
Recommendations for presentation of spine
titles
Specification for authorized signature lists
and their representation on microfiche in
bank operations
Specification for mail payment orders
Specification for nostro accounts
reconciliation in banking
BS 7096
BS 7102: Part 1
BS 7110
BS 7205
BS 7298
BS ISO 7775
BS ISO 8730
BS ISO 9144
BS ISO 9807
BS ISO 10126-1
BS ISO 10126-2
BS EN 24217
BS EN 27982-1
BS 4748
BS 5332
BS 7124: Part 1
DD 179
BS ISO 6196-7
BS ISO 8459-2
Guide to design and use of bank cards with
a magnetic stripe that employs track 3
Recommendations for algorithms for use in
banking message authentication -- Data
Encryption Algorithm (DEA)
Guide to design and use of savings books
with magnetic stripes for information
interchange
Procedures for key management to achieve
security for financial institutions engaged
in financial transactions (wholesale)
Schedule of requirements and
recommendations for cards to be used in
electronic funds transfer at point of sale
(EFT-POS)
Securities. Scheme for message types
Banking. Requirements for message
authentication (wholesale)
Securities. Optical character recognition
line. Position and structure
Banking and related financial services.
Requirements for message authentication
(retail)
Banking. Procedures for message
encipherment (wholesale) -- General
principles
Banking. Procedures for message
encipherment (wholesale) -- DEA
algorithm
Codes for the representation of currencies
and funds
Bank telecommunication. Funds transfer
messages -- Vocabulary and data elements
Specification for format for bibliographic
information interchange on magnetic tape
Specification for data elements for the
generation and exchange of serials records
Bibliographic data element directory -Specification for interloan applications
Glossary of terms used in computerassisted publishing (ISO/TR 9544 : 1988)
Micrographics. Vocabulary -- Computer
micrographics
Information and documentation.
Bibliographic data element directory -Acquisitions applications
BS ISO 8514-1
BS ISO 8514-2
BS ISO 10160
BS ISO 10161-1
BS ISO 10162
DD ENV 1285
BS EN 29070
BS ISO 10163-1
BS 6695
BS 7096
BS 7298
DD 219 : Part 1
DD 219 : Part 2
BS ISO 7775
BS EN ISO 8583
BS ISO 8730
Micrographics. Alphanumeric computer
output microforms. Quality control -Characteristics of the test slide and test data
Micrographics. Alphanumeric computer
output microforms. Quality control -Method
Information and documentation. Open
systems interconnection. Interlibrary loan
application service definition
Information and documentation. Open
systems interconnection. Interlibrary loan
application protocol specification -Protocol specification
Information and documentation. Open
systems interconnection. Search and
retrieve application service definition
Information processing. Techniques for
using SGML. Application for European
standards
Information technology. SGML support
facilities. Registration procedures for
public text owner identifiers
Information and documentation. Open
systems interconnection. Search and
retrieve application protocol specification - Protocol specification
Specification for nostro accounts
reconciliation in banking
Guide to design and use of bank cards with
a magnetic stripe that employs track 3
Schedule of requirements and
recommendations for cards to be used in
electronic funds transfer at point of sale
(EFT-POS)
Electronic funds transfer at point of sale
(EFT- POS). Conceptual framework. -Guide to roles, entities and relationships
Electronic funds transfer at point of sale
(EFT- POS). Conceptual framework. -Guide to EFT-POS system description
Securities. Scheme for message types
Financial transaction card originated
messages. Interchange message
specifications
Banking. Requirements for message
authentication (wholesale)
BS ISO 9144
BS ISO 10126-1
BS ISO 10126-2
BS EN ISO 10373
BS EN ISO 10536-1
DD ENV 1257-1
BS EN 27982-1
BS EN 29564-1
BS EN 29564-2
BS EN 29992-1
BS EN 30202-1
BS 6548 : Part 4
BS 8210
BS 3138
BS 3375 : Part 1
BS 3375 : Part 2
Securities. Optical character recognition
line. Position and structure
Banking. Procedures for message
encipherment (wholesale) -- General
principles
Banking. Procedures for message
encipherment (wholesale) -- DEA
algorithm
Identification cards. Test methods
Identification cards. Contactless integrated
circuit(s) cards -- Physical characteristics
Identification card systems. Rules for
personal identification number (PIN)
handling in intersector environments -Specifies the rules for the presentation of
the Personal Identification Number (PIN)
in the intersector environments. -- PIN
presentation
Bank telecommunication. Funds transfer
messages -- Vocabulary and data elements
Banking. Personal identification number
management and security -- PIN protection
principles and techniques
Banking. Personal identification number
management and security -- Approved
algorithm(s) for PIN encipherment
Financial transaction cards. Messages
between the integrated circuit card and the
card accepting device -- Financial
transaction cards. Messages between the
integrated circuit card and the card
accepting device. Concepts and structures
Financial transaction cards. Security
architecture of financial transaction
systems using integrated circuit cards -Card life cycle
Maintainability of equipment -- Guide to
the planning of maintenance and
maintenance support
Guide to building maintenance
management
Glossary of terms used in management
services
Work study and organization and methods
(O & M) -- Guide to organization study.
Work study and organization and methods
BS 3456 : Part 102 : Section 102.71
BS 3375 : Part 3
BS 3375 : Part 4
BS 3811
BS 3843 : Part 1
BS 3843 : Part 2
BS 4335
BS 6224
BS 7000 : Part 10
PD 6470
BS 441
BS 5713
BS 7511
BS 7512
BS 7513
BS 6264
BS 6574
BS 7802
(O & M) -- Guide to method study
Specification for safety of household and
similar electrical appliances Particular
requirements Dispensing appliances for
food, drink and packaged consumer
products
Work study and organization and methods
(O & M) -- Guide to work measurement
Work study and organization and methods
(O & M) -- Guide to work performance
control
Glossary of terms used in terotechnology
Guide to terotechnology (the economic
management of assets) -- Introduction to
terotechnology
Guide to terotechnology (the economic
management of assets) -- Introduction to
the techniques and applications
Glossary of terms used in project network
techniques
Guide to design structure diagrams for use
in program design and other logic
applications
Design management systems -- Glossary of
terms used in design management
The management of design for economic
production. Standardization philosophy
aimed at improving the performance of the
electrical and mechanical manufacturing
sectors
Specification of purchasing requirements
for flux-cored and solid soft-solder wire
Specification for hermetically sealed flat
double glazing units
General criteria for certification bodies
operating product certification
General criteria for certification bodies
operating quality system certification
General criteria for certification bodies
operating certification of personnel
Guide to procedure for operator training for
earth-moving machinery
Guide to training of mechanics concerned
with the operation and maintenance of
earth-moving machinery
Glossary of terms used in operational
BS 5191
BS 5192:Part 1
BS 5192:Part 2
BS 5192:Part 3
BS 5192:Part 4
BS 5192:Part 5
BS 5192:Part 6
BS 5750 : Part 8
BS 5750 : Part 13
BS 2564
BS 5750 : Part 4
BS 5752 : Part 13
BS 5752 : Part 14
BS 5882
BS 6143 : Part 1
BS 6143 : Part 2
research
Glossary of production planning and
control terms
Guide to production control -- Introduction
Guide to production control -- Production
programming
Guide to production control -- Ordering
methods
Guide to production control -- Dispatching
(shop-floor control)
Guide to production control -- The
relationship between production control
and other management functions
Guide to production control -- Computer
aided production control
Quality systems -- Guide to quality
management and quality systems elements
for services
Quality systems -- Guide to the application
of BS 5750 : Part 1 to the development,
supply and maintenance of software
Control chart technique when
manufacturing to a specification, with
special reference to articles machined to
dimensional tolerances
Quality systems -- Guide to the use or BS
EN ISO 9001 'Model for quality assurance
in design, development, production,
installation and servicing (Formerly BS
5750 : Part 1)', BS EN ISO 9002 'Model for
quality assurance in production installation
and serv
Methods of test for coffee and coffee
products -- Roasted ground coffee.
Determination of moisture content. Karl
Fischer method (reference method)
Methods of test for coffee and coffee
products -- Roasted ground coffee.
Determination of moisture content (loss in
mass at 103øC (routine method)
Specification for a total quality assurance
programme for nuclear installations
Guide to the economics of quality -Process cost model
Guide to the economics of quality -Prevention, appraisal and failure model
BS 6460 : Part 1
BS 7165
BS 7520
BS 7850 : Part 1
BS 7850 : Part 2
BS CECC 00108
BS CECC 00111 : Part 1
BS CECC 00111 : Part 2
BS CECC 00114 : Part 4
BS CECC 00800
BS CECC 210000
BS QC 001002
DD 198
PD 6538
PD 6584
BS EN ISO 8402
BS EN ISO 9001
Specification of the general requirements
for the technical competence of testing
laboratories
Recommendations for achievement of
quality in software
Guide to quality assurance plans for tools
for live working
Total quality management -- Guide to
management principles
Total quality management -- Guidelines for
quality improvement
Rule of Procedure 8. Attestation of
conformity. The CECC Mark and
conditions of use, certificates of approval
and procedures for the attestation of
conformity
Rule of Procedure 11. Specifications -General regulations for CECC
specifications
Rule of Procedure 11. Specifications -Regulations for CECC Specifications for
components of enhanced assessment of
quality
Rule of procedure 14. Quality assessment
procedures -- Procedure for enhanced
assessment of quality
Harmonized system of quality assessment
for electronic components. Code of practice
for the use of the ppm approach in
association with the CECC system
Harmonized system of quality assessment
for electronic components. Requirements
for technology approval schedules (TAS)
Rules of Procedure of the IEC Quality
Assessment System for Electronic
Components (IECQ)
Guide to assessment of reliability of
systems containing software
Vision 2000. A strategy for international
standards' implementation in the quality
arena during the 1990s
Model for a supplier quality assurance
assessment questionnaire
Quality management and quality assurance.
Vocabulary
Quality systems. Model for quality
BS EN ISO 9002
BS EN ISO 9003
BS EN ISO 9004-1
BS ISO 10005
BS ISO 10007
BS ISO 10013
BS EN 2000
BS EN 3042
BS EN 46001
BS EN 46002
BS 6450 : Part 7
BS 7514
BS CECC 00109
BS CECC 00111 : Part 0
BS CECC 00111 : Part 3
BS CECC 00111 : Part 4
BS CECC 00111 : Part 5
BS CECC 00111 : Part 6
assurance in design, development,
production, installation and servicing
Quality systems. Model for quality
assurance in production, installation and
servicing
Quality systems. Model for quality
assurance in final inspection and test
Quality management and quality assurance
standards -- Guidelines
Quality management. Guidelines for
quality plans
Quality management. Guidelines for
configuration management
Guidelines for developing quality manuals
Quality assurance. EN aerospace products.
Approval of the quality system of
manufacturers
Quality assurance. EN aerospace products.
Qualification procedure
Application of EN 29001 (BS 5750 : Part
1) to the manufacture of medical devices
Application of EN 29002 (BS 5750 : Part
2) to the manufacture of medical devices
Private branch exchanges for connection to
public switched telephone networks run by
certain public telecommunications
operators -- Specification for the procedure
for in-service observation of PBXs
undergoing type approval
General criteria for suppliers' declaration of
conformity
Rule of Procedure 9. Certified test records
Rule of Procedure 11. Specifications -- An
introduction to the types of specifications
applicable within the CECC system
Rule of Procedure 11. Specifications -Regulations for CECC Specifications for
components for general and professional
(civil and military) usage (excluding detail
specifications)
Rule of Procedure 11. Specifications -Regulations for CECC detail specifications
Rule of Procedure 11. Specifications -Preparation of specifications under the
Single Originator Procedure
Rule of Procedure 11. Specifications --
BS CECC 00111 : Part 7
BS CECC 00111 : Part 8
BS CECC 00112 : Part 2
BS CECC 00114 : Part 0
BS CECC 00114 : Part 2
BS CECC 00114 : Part 3
DD ENV 190000-6
BS EN 30011-1
BS CECC 00114 : Part 5
BS CECC 20000
BS EN 30011-2
BS EN 30011-3
BS EN 45003
BS EN 45004
Regulations for Process Assessment
Schedules (PAS)
Rule of Procedure 11. Specifications -Regulations for component specifications
and assessment specifications
Rule of Procedure 11. Specifications -Regulations for Technology Approval
Schedules (TAS)
Rule of Procedure 12. Voting procedures -CECC European standards
Rule of procedure 14. Quality assessment
procedures -- An introduction to the types
of approval available under the CECC
system
Rule of procedure 14. Quality assessment
procedures -- Qualification approval of
electronic components
Rule of procedure 14. Quality assessment
procedures -- Capability approval of an
electronic component manufacturing
activity
Generic specification : monolithic
integrated circuits -- Procedure for
approval and quality management
Guidelines for auditing quality systems -Guidelines for auditing quality systems.
Auditing
Rule of procedure 14. Quality assessment
procedures -- Process approval of specialist
contractors within the electronic
components industry
Harmonized system of quality assessment
for electronic components : generic
specification : semiconductor
optoelectronic and liquid crystal devices
Guidelines for auditing quality systems -Guidelines for auditing quality systems.
Qualification criteria for quality systems
auditors
Guidelines for auditing quality systems -Guidelines for auditing quality systems.
Management of audit programmes
Calibration and testing laboratory
accreditation systems. General
requirements for operation and recognition
General criteria for the operation of various
BS 2635
BS 2846 : Part 1
BS 2846 : Part 2
BS 2846 : Part 3
BS 2846 : Part 4
BS 2846 : Part 6
BS 2846 : Part 7
BS 2846 : Part 8
BS 2987
BS 5700
BS 5701
BS 5703 : Part 1
BS 5703 : Part 2
BS 5703 : Part 3
BS 5703 : Part 4
BS ISO 3534-1
BS ISO 3534-2
types of bodies performing inspection
Drafting specifications based on limiting
the number of defectives permitted in small
samples
Guide to statistical interpretation of data -Routine analysis of quantitative data
Guide to statistical interpretation of data -Estimation of the mean : confidence
interval
Guide to statistical interpretation of data -Determination of a statistical tolerance
interval
Guide to statistical interpretation of data -Techniques of estimation and tests relating
to means and variances
Guide to statistical interpretation of data -Comparison of two means in the case of
paired observations
Guide to statistical interpretation of data -Tests for departure from normailty
Guide to statistical interpretation of data -Estimation of a median
Notes on the application of statistics to
paper testing
Guide to process control using quality
control chart methods and cusum
techniques
Guide to number-defective charts for
quality control
Guide to data analysis and quality control
using cusum techniques -- Introduction to
cusum charting
Guide to data analysis and quality control
using cusum techniques -- Decision rules
and statistical tests for cusum charts and
tabulations
Guide to data analysis and quality control
using cusum techniques -- Cusum methods
for process/quality control by measurement
Guide to data analysis and quality control
using cusum techniques -- Cusums for
counted/attributes data
Statistics. Vocabulary and symbols -Probability and general statistical terms
Statistics. Vocabulary and symbols -Statistical quality control
BS ISO 3534-3
BS 7109: Part 3
BS CECC 00016
BS ISO 5725-2
BS EN 742
BS EN 27816-1
BS EN 27816-2
BS 4163
BS 6451
BS 505
BS 4631
BS EN 29318-2
BS EN 29318-3
BS EN 29318-4
BS EN 29367-1
Statistics. Vocabulary and symbols -Glossary of terms relating to the design of
experiments
Guide to design and use of identification
cards having integrated circuits with
contacts -- Electronic signals and
transmission protocols
Harmonized system of quality assessment
for electronic components. Basic
specification : basic requirements for the
use of statistical process control (SPC) in
the CECC system
Accuracy (trueness and precision) of
measurement methods and results -- Basic
methods for the determination of
repeatability and reproducibility of a
standard measurement method
Identification cards. ID-1 card. Location of
contacts for cards and devices used in
Europe
Guide to design and use of identification
cards having integrated circuits with
contacts -- Physical characteristics
Guide to design and use of identification
cards having integrated circuits with
contacts -- Contact locations and minimum
size
Code of practice for health and safety in
workshops of schools and similar
establishments
Specification for netting and fibre rope lead
restraint systems in surface transport
Specification for road traffic signals
Specification for parking discs
Information technology. Intelligent
Peripheral Interface -- Device specific
command set for magnetic disk drives
Information technology. Intelligent
Peripheral Interface -- Device generic
command set for magnetic and optical disk
drives
Information technology. Intelligent
Peripheral Interface -- Device generic
command set for magnetic tape drives
Lashing and securing arrangements on road
vehicles for sea transportation on Ro/Ro
BS EN 29367-2
BS 7179: Part 4
BS 7179: Part 5
BS 7179: Part 6
BS 7299 : Part 1
BS 7299 : Part 2
BS 7299 : Part 5
BS 7299 : Part 4
BS 7299 : Part 6
BS 7299 : Part 7
BS 7299 : Part 8
BS 7402
BS 7521
ships. General requirements -- Commercial
vehicles and combinations of vehicles,
semi-trailers excluded
Lashing and securing arrangements on road
vehicles for sea transportation on Ro/Ro
ships. General requirements -- Semi-trailers
Ergonomics of design and use of visual
display terminals (VDTs) in offices -Specification for keyboards
Ergonomics of design and use of visual
display terminals (VDTs) in offices -Specifications for VDT workstations
Ergonomics of design and use of visual
display terminals (VDTs) in offices -- Code
of practice for the design of VDT work
environments
Office document architecture (ODA) and
interchange format for text and office
systems -- Introduction and general
principles
Office document architecture (ODA) and
interchange format for text and office
systems -- Document structures
Office document architecture (ODA) and
interchange format for text and office
systems -- Office document interchange
format (ODIF)
Office document architecture (ODA) and
interchange format for text and office
systems -- Document profile
Office document architecture (ODA) and
interchange format for text and office
systems -- Character content architectures
Office document architecture (ODA) and
interchange format for text and office
systems -- Raster graphics content
architectures
Office document architecture (ODA) and
interchange format for text and office
systems -- Geometric graphics content
architectures
Guide to specifying electronic typographic
markup (SETM)
Specification for electronic messaging
enabling the application of BS ISO/IEC
10021 in the United Kingdom
BS EN 29241-1
BS EN 29241-2
BS EN 29241-3
BS 3680 : Part 8F
BS 6078
BS 7227
BS 7467
BS 7567 : Part 1
BS 7567 : Part 2
BS 7567 : Part 3
BS ISO 9711-1
BS ISO 9711-2
BS ISO 9897-1
BS ISO 9897-3
BS EN 726-3
Ergonomic requirements for office work
with visual display terminals (VDTs) -General introduction
Ergonomic requirements for office work
with visual display terminals (VDTs) -Guidance on task requirements
Ergonomic requirements for office work
with visual display terminals (VDTs) -Visual display requirements
Measurement of liquid flow in open
channels -- Measuring instruments and
equipment -- Hydrometric data
transmission systems : general
Guide to the application of digital
computers to nuclear reactor
instrumentation and control
Procedures for the application of ISO 7812
to allocate UK Issuer Identification
Numbers (UK IINs) for use on
identification cards
Specification for symbols for computer
applications in ship building and marine
technology
Electronic transfer of geographic
information (NTF) -- Specification for NTF
structures
Electronic transfer of geographic
information (NTF) -- Specification for
implementing plain NTF
Electronic transfer of geographic
information (NTF) -- Specification for
implementing NTF using BS 6690
Freight containers. Information related to
containers on board vessels -- Bay plan
system
Freight containers. Information related to
containers on board vessels -- Telex data
transmission
Freight containers. Container equipment
data exchange (CEDEX) -- General
communication codes
Freight containers. Container equipment
data exchange (CEDEX) -- Message types
for electronic data interchange
Identification card systems.
Telecommunications. Integrated circuit(s)
BS EN 726-4
DD ENV 1614
BS EN 27372
BS EN 29735
BS 5775 : Part 11
BS 7237
BS 5168
BS 5775 : Part 8
BS 5775 : Part 9
BS 5775 : Part 10
BS 5775 : Part 13
BS 5525
BS 6879
BS 7567 : Part 1
BS 7567 : Part 2
BS 7567 : Part 3
cards and terminals -- Application
independent card requirements
Identification card systems.
Telecommunications. Integrated circuit(s)
cards and terminals -- Application
independent card related terminal
requirements
Healthcare informatics. Structure for
nomenclature, classification and coding of
properties in clinical laboratory science
Trade data interchange. Trade data
elements directory
Electronic data interchange for
administration, commerce and transport
(EDIFACT). Application level syntax rules
Specification for quantities, units and
symbols -- Mathematical signs and
symbols for use in physical sciences and
technology
Specification for binary floating point
arithmetic for microprocessor systems
Glossary of rheological terms
Specification for quantities, units and
symbols -- Physical chemistry and
molecular physics
Specification for quantities, units and
symbols -- Atomic and nuclear physics
Specification for quantities, units and
symbols -- Nuclear reactions and ionizing
radiations
Specification for quantities, units and
symbols -- Solid state physics
Specification for 35 mm microcopying of
maps and plans
Specification for codes for the
representation of names of counties and
similar areas
Electronic transfer of geographic
information (NTF) -- Specification for NTF
structures
Electronic transfer of geographic
information (NTF) -- Specification for
implementing plain NTF
Electronic transfer of geographic
information (NTF) -- Specification for
implementing NTF using BS 6690
BS 7666 : Part 1
BS 7666 : Part 2
BS 7666 : Part 3
BS 185 : Section 15
BS 2842
BS 7022
BS 7440
BS 7621
BS 6559
BS 6566 : Part 7
BS 7231 : Part 1
BS 7231 : Part 2
BS 5763 : Part 11
BS 5763 : Part 16
BS 6471
BS 5763 : Part 5
BS 5763 : Part 8
Spatial data-sets for geographical
referencing -- Specification for a Street
Gazetteer
Spatial data-sets for geographical
referencing -- Specification for a Street
Gazetteer -- Specification for a land and
property Gazetteer
Spatial data-sets for geographical
referencing -- Specification for addresses
Glossary of aeronautical and astronautical
terms -- Meteorology
Specification for whirling hygrometer
Guide for geophysical logging of boreholes
for hydrogeological purposes
Method for calibrating field pyrheliometers
by comparison to a reference pyrheliometer
Method for calibrating field pyranometers
by comparison to a reference pyranometer
Guide General introductory document on
European (or CEN) methods of test for
wood preservatives
Plywood -- Specification for classification
of resistance to fungal decay and wood
borer attack
Body measurements of boys and girls from
birth up to 16.9 years -- Information in the
form of tables
Body measurements of boys and girls from
birth up to 16.9 years -- Recommendations
of body dimensions for children
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Bacillus cereus
Methods for microbiological examination
of food and animal feeding stuffs -Detection of presumptive pathogenic
Yersinia enterocolitica
Method for determination of the
antimicrobial value of QAC disinfectant
formulations
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of micro-organisms - colony
count at 30øC (surface plate technique)
Methods for microbiological examination
of food and animal feeding stuffs --
BS 6734
BS ISO 10718
BS 5213
BS 6068 : Part 4 : Section 4.2
BS 6068 : Part 4 : Section 4.3
BS 6068 : Part 4 : Section 4.4
BS 6068 : Part 4 : Section 4.5
BS 6920 : Part 2 : Section 2.4
BS 7592
DD 211
BS 5348 : Part 2
BS 5763 : Part 0
BS 5763 : Part 1
Enumeration of presumptive Escherichia
coil. Most probable number technique
Method for determination of the
antimicrobial efficacy of disinfectants for
veterinary and agricultural use
Cork stoppers. Enumeration of colonyforming units of yeasts, moulds and
bacteria capable of growth in an alcoholic
medium
Specification for medical specimen
containers for microbiology
Water quality -- Microbiological methods - Guide to the enumeration of microorganism by culture
Water quality -- Microbiological methods - Detection and enumeration (most
probable number) of faecal streptococci by
the multiple tube technique
Water quality -- Microbiological methods - Detection and enumeration of faecal
streptococci by the membrane filtration
technique
Water quality -- Microbiological methods - Method for the enumeration of viable
micro-organisms: colony count by
inoculation in or on a nutrient agar culture
medium
Suitability of non-metallic products for use
in contact with water intended for human
consumption with regard to their effect on
the quality of the water -- Methods of test - Growth of aquatic microorganisms
Methods for sampling for Legionella
organisms in water and related materials
Method for detection and enumeration of
Legionella organisms in water and related
materials
Methods for sampling meat and meat
products -- Preparation of test samples for
microbiological examination
Methods for microbiological examination
of food and animal feeding stuffs -General laboratory practices
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of micro-organisms - colony
BS 5763 : Part 10
BS 5763 : Part 13
BS 5763 : Part 14
BS 5763 : Part 15
BS 5763 : Part 2
BS 5763 : Part 3
BS 5763 : Part 4
BS 5763 : Part 6
BS 5763 : Part 7
BS 5763 : Part 9
BS EN ISO 3952-1
BS EN ISO 3952-2
BS EN ISO 3952-3
BS 1000 : Auxiliaries
BS 1679 : Part 1
count technique at 30øC
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Enterobacteriaceae
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Escherichia coli : colony
count technique using membranes
Methods for microbiological examination
of food and animal feeding stuffs -Detection of Vibrio parahaemolyticus
Methods for microbiological examination
of food and animal feeding stuffs -Detection of Enterobacteriaceae with preenrichment
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of coliforms - colony count
technique
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of coliforms. Most probable
number technique
Methods for microbiological examination
of food and animal feeding stuffs -Detection of Salmonella
Methods for microbiological examination
of food and animal feeding stuffs -Preparation of dilutions
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Staphylococcus aureus by
colony count technique
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Clostridium perfringens
Kinematic diagrams. Graphical symbols -Part 1
Kinematic diagrams. Graphical symbols -Part 2
Kinematic diagrams. Graphical symbols -Part 3
Universal Decimal Classification. English
full edition -- Auxiliary signs and
subdivisions (except those of place)
Containers for pharmaceutical dispensing --
BS 1679 : Part 5
BS 1679 : Part 7
BS 1679 : Part 8
BS 7236
PD 6542
BS EN 724
DD ENV 1068
BS EN 21942-1
BS 61
BS 84
BS 1104
BS 1580 : Parts 1 & 2
BS 1929
BS 1936 : Part 1
BS 1936 : Part 2
BS 3580
BS EN 30993-5
BS 6102 : Part 8
Paperboard containers for strip and blister
packs
Containers for pharmaceutical dispensing -Eye dropper bottles
Containers for pharmaceutical dispensing -Ribbed oval glass bottles
Containers for pharmaceutical dispensing -Specification for glass and plastics
containers for solid dosage forms, semisolids and powders
Code of practice for non-reclosable
packaging for solid dose units of medicinal
products
Investigation of syntaxes for existing
interchange formats to be used in
healthcare
Guidance on the application of EN 29001
and EN 46001 and of EN 29002 and EN
46002 for non-active medical devices
Medical informatics. Health care
information interchange. Registration of
coding schemes
Dental vocabulary -- General and clinical
terms
Specification for threads for light gauge
copper tubes and fittings
Specification for parallel screw threads of
Whitworth form
Specification for general purpose Acme
screw threads
Specification for Unified screw threads -Diameters 1/4 larger
Specification for screw threads and
external dimensions of lamps for
endoscopic and diagnostic instruments
Undercuts and runouts for screw threads -Inch screw threads
Undercuts and runouts for screw threads -Specification for ISO metric screw threads
Guide to design considerations on the
strength of screw threads
Biological evaluation of medical devices -Tests for cytotoxicity, in vitro methods
Cycles -- Specifications for screw threads
used to assemble freewheels on bicycle
hubs.
BS 6528
BS 6578 : Part 2
BS 7012 : Part 4
PD 6494
PD 6507
BS 4727 : Part 5 : Group 01
BS 5724 : Part 1
BS 21
BS 5736 : Part 4
BS 3643 : Part 1
BS 3643 : Part 2
BS 4185 : Part 10
BS 7139
PD 6573
BS EN 20594-1
BS 4377
BS 4827
BS EN 46001
BS 5346
Glossary of terms for cylindrical screw
threads
Laryngoscopic fittings -- Specification for
screw threads for miniature electric lamps
and sockets
Light microscopes -- Specification for
microscope objective and nosepiece screw
threads
Mismatch of screw thread systems
Guidance on metric screw threads and
fasteners for use by model engineers
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
electromedical equipment -- Radiology and
radiological physics terminology
Medical electrical equipment -Specification for general safety
requirements
Specification for pipe threads for tubes and
fittings where pressure-tight joints are
made on the threads (metric dimensions)
Evaluation of medical devices for
biological hazards -- Method of test for
intracutaneous reactivity of extracts from
medical devices
ISO metric screw threads Principles and
basic data
ISO metric screw threads Specification for
selected limits of size
Machine tool components -- Trapezoidal
threads for lead and feed screw assemblies
Guide to graphical symbols for use on
medical electrical equipment
Fundamental aspects of safety standards for
medical electrical equipment
Conical fittings with a 6% (Luer) taper for
syringes, needles and certain other medical
equipment -- General requirements
Specification for tapping of holes to receive
wire thread inserts (ISO metric threads)
Specification for ISO miniature screw
threads. Metric series
Application of EN 29001 (BS 5750 : Part
1) to the manufacture of medical devices
Specification. ISO metric trapezoidal screw
BS EN 46002
BS 5590
BS 6293 : Part 1
BS 6293 : Part 3
BS EN 60601-1-1
BS EN 60601-1-2
BS 6567
BS 7751 : Part 1
BS 7751 : Part 2
BS EN 60601-1-3
BS EN 60601-2-2
BS 7752 : Part 1
BS 7752 : Part 2
BS EN 60601-2-21
BS EN 60601-2-26
BS 7753
threads
Application of EN 29002 (BS 5750 : Part
2) to the manufacture of medical devices
Specification for screw thread metric series
measuring cylinders
Aerospace. MJ threads -- General
requirements
Aerospace. MJ threads -- Limit dimensions
for fittings for fluid systems
Medical electrical equipment -- General
requirements for safety -- Collateral
standard. Safety requirements for medical
electrical systems
Medical electrical equipment -- General
requirements for safety -- Collateral
standard. Electromagnetic compatibility.
Requirements and tests
Specification for ends of fasteners with
external metric ISO thread
Prevailing torque type wire thread inserts -Specification for ISO metric coarse pitch
threads
Prevailing torque type wire thread inserts -Specification for ISO metric fine pitch
threads
Medical electrical equipment -- General
requirements for safety -- Collateral
standard. General requirements for
radiation protection in diagnostic X-ray
equipment
Particular requirements for safety -Medical electrical equipment. Particular
requirements for safety. Specification for
high frequency surgical equipment
Free running type wire thread inserts -Specification for ISO metric coarse pitch
threads
Free running type wire thread inserts -Specification for ISO metric fine pitch
threads
Medical electrical equipment.Particular
requirements for safety -- Specification for
infant radiant warmers
Particular requirements for safety -Specification for electroencephalographs
Specification for performance of prevailing
BS EN 60601-2-27
BS EN 60601-2-28
BS EN 60601-2-31
BS EN 60601-2-32
BS EN 60601-2-34
BS 1319
BS 1580 : Part 3
BS 2779
BS 3353
BS 2827
BS 93
BS 811
BS 3487 : Part 1
BS 4084
BS 3487 : Part 2
BS 3487 : Part 3
BS 3487 : Part 4
BS 3487 : Part 5
torque wire thread inserts
Particular requirements for safety -Specification for electrocardiographic
monitoring equipment
Particular requirements for safety -Specification for X-ray source assemblies
and X-ray tube assemblies for medical
diagnosis
Particular requirements for safety -Specification for external cardiac
pacemakers with internal power source
Particular requirements for safety -Specification for associated equipment of
X-ray equipment
Particular requirements for safety -Specification for direct blood-pressure
monitoring equipment
Specification for medical gas cylinders,
valves and yoke connections
Specification for Unified screw threads -Diameters below 1/4 in
Specification for pipe threads for tubes and
fittings where pressure-tight joints are not
made on the threads (metric dimensions)
Specification for anaesthetic reservoir bags
Specification for machine screw nuts,
pressed type (B.A. and Whitworth form
threads)
Specification for British Association (B.A.)
screw threads with tolerances for sizes 0
B.A. to 16 B.A.
Specification for cycle (B.S.C.) threads
(formerly known as C.E.I. threads)
Tracheal tubes Specification for all types of
tubes
Specification for UNJ threads, with
controlled root radius, for aerospace : inch
series
Tracheal tubes Oro-tracheal and nasotracheal tubes of the Magill type (plain and
cuffed)
Tracheal tubes Specification for tubes of
the Murphy type
Tracheal tubes Specification for tubes of
the Cole type
Tracheal tubes Specification and methods
BS 3849 : Part 1
BS 3849 : Part 2
BS 3849 : Part 4
BS EN ISO 1478
BS 4272 : Part 1
BS 4272 : Part 2
BS 4272 : Part 3
BS 5682
BS 5724 : Part 2 : Section 2.4
BS 5724 : Part 2 : Section 2.10
BS 5724 : Part 2 : Section 2.12
BS 5724 : Part 2 : Section 2.13
BS 5724 : Part 2 : Section 2.23
BS 5724 : Part 2 : Section 2.24
BS 5724 : Part 2 : Section 2.27
of test for tube collapse and cuff herniation
Conical connectors for anaesthetic and
respiratory equipment -- Specifcation for
cones and sockets (excluling 8.5 mm size)
Conical connectors for anaesthetic and
respiratory equipment -- Specification for
screw-threaded weight-bearing connectors
Conical connectors for anaesthetic and
respiratory equipment -- Specification for
8.5 mm cones and sockets
Tapping screw threads
Anaesthetic and analgesic machines -Ariaesthetic machines of the on-demand
type supplied with nitrous oxide and
oxygen from separate containers
Anaesthetic and analgesic machines -Specification for intermittent (demand)
flow analgesic machines for use with
50/50% (V/V) nitrous oxide and oxygen
Anaesthetic and analgesic machines -Specification for continuous flow
ariaesthetic machines
Specification for terminal units, hose
assemblies and their connectors for use
with medical gas pipeline systems
Medical electrical equipment -- Particular
requirements for safety -- Specification for
cardiac defibrillators and cardiac
defibrillator-monitors
Medical electrical equipment -- Particular
requirements for safety -- Specification for
nerve and muscle stimulators
Medical electrical equipment -- Particular
requirements for safety -- Specification for
lung ventilators
Medical electrical equipment -- Particular
requirements for safety -- Specification for
anaesthetic machines
Medical electrical equipment -- Particular
requirements for safety -- Specification for
oxygen concentrators
Medical electrical equipment -- Particular
requirements for safety -- Specification for
humidifiers
Medical electrical equipment -- Particular
requirements for safety -- Specification for
BS 5724 : Part 2 : Section 2.119
BS 5724 : Part 2 : Section 2.120
BS 5724 : Part 3 : Section 3.12
BS 6149 : Part 1
BS 6149 : Part 2
BS 6151
BS 6546
BS 6834
BS 6850
BS 7143
BS 7634
BS 7652 : Part 2
BS 7711 : Part 1
BS 7711 : Part 2
BS 7711 : Part 3
BS 7734
BS EN 475
BS EN 540
BS 795
BS 1263 : Part 1
BS 1619 : Part 1
oxygen analyzers for monitoring patient
breathing mixtures
Medical electrical equipment -- Particular
requirements for safety -- Specification for
baby incubators
Medical electrical equipment -- Particular
requirements for safety -- Specification for
transport incubators
Medical electrical equipment -- Particular
requirements for performance -- Method of
declaring parameters for lung ventilators
Tracheostomy tubes -- Specification for
connectors
Tracheostomy tubes -- Basic requirements
for tubes for adults
Specification for breathing tubes for use
with anaesthetic apparatus and ventilators
Specification for tracheal tube connectors
Specification for active anaesthetic gas
scavenging systems
Specification for ventilatory resuscitators
Specification for catheter mounts (flexible
adaptors) for use with medical breathing
systems
Specification for oxygen concentrators for
use with medical gas pipeline systems
Specification for plungers and discs for
dental local anaesthetic cartridges
Respiratory therapy equipment -Specification for tubing and connectors
Respiratory therapy equipment -Specification for air entrainment devices
Respiratory therapy equipment -Specification for gas-powered nebulizers
for the delivery of drugs
Specification for anaesthetic circle
breathing systems
Medical devices. Electrically-generated
alarm signals
Clinical investigation of medical devices
for human subjects
Specification for ampoules
Reusable hypodermic syringes for medical
use -- Specification for dimensions of allglass and metal-and-glass syringes
Hypodermic syringes for insulin injection -
BS 1619 : Part 2
BS 1695 : Part 1
BS 1695 : Part 2
BS 2463 : Part 1
BS 2463 : Part 2
BS 3522
BS 3930 : Part 2
BS 4843
BS 5081:Part 1
BS 6196
BS 6314
BS 7174: Part 2
BS 7174: Part 3
BS 7174: Part 5
BS 7432
BS 7652 : Part 1
BS 7174: Part 4
(Luer fitting)
Re-usable hypodermic syringes for insulin
injection -- Specification for syringes for
use with insulin of strength 100 units per
millilitre
Urological catheters -- Specification for
sterile, single-use urethral catheters of the
N‚laton and Foley types
Urological catheters -- Specification for
sterile, single-use urethral catheters of the
Tiemann, whistle tip, 3-way and
haematuria types
Transfusion equipment for medical use -Specification for collapsible containers for
blood and blood components
Transfusion equipment for medical use -Specification for administration sets
Specification for hypodermic surgical
mounted needles (Luer fitting)
Conical fittings with a 6% (Luer) taper for
syringes, needles and other medical
equipment -- Specification for lock fittings
Specification for sterile intravascular
cannula units for single use
Sterile hypodermic syringes and needles -Specification for sterile, single-use
hypodermic syringes for manual use
Specification for sterile epidural catheters
and introducer needles for single use
Specification for sterile, single-use, nasoenteric feeding tubes and ancillary
equipment
Sterile intravascular catheters and ancillary
devices for single use -- Specification for
angiographic catheters
Sterile intravascular catheters and ancillary
devices for single use -- Specification for
central venous catheters
Sterile intravascular catheters and ancillary
devices for single use -- Specification for
balloon dilatation catheters
Specification for dental cartridge syringes
Prefilled syringes -- Specification for glass
cylinders for dental local anaesthetic
cartridges
Sterile intravascular catheters and ancillary
BS EN ISO 6009
BS EN 28362-1
BS EN 28362-2
BS EN 28362-3
BS EN 28362-4
BS EN 28872
BS EN 50072
BS 2930
BS 3271
BS 3348
BS 3531 : Part 5 : Section 5.7
BS 4824
BS 5194:Part 1
BS 5194:Part 2
BS 5194:Part 3
BS 5194:Part 4
BS 6578 : Part 1
BS 6578 : Part 2
devices for single use -- Specification for
introducer needles, introducer cannulae,
guide wires, dilators, valves and connectors
Hypodermic needles for single use. Colour
coding for identification
Injection containers for injectables and
accessories -- Injection vials made of glass
tubing
Injection containers for injectables and
accessories -- Closures for injection vials
Injection containers for injectables and
accessories -- Aluminium caps for injection
vials
Injection containers for injectables and
accessories -- Injection vials made of
moulded glass
Aluminium caps for transfusion, infusion
and injection bottles. General requirements
and test methods
Medical electrical equipment. Particular
requirements for safety. Specification for
peritoneal dialysis equipment
Specification for surgical spring trusses
Specification for surgical elastic band
trusses
Specification for antral trocars and
cannulae
Implants for osteosynthesis Bone screws
and auxiliary equipment Specification for
drill bits, taps and countersink cutters
Specification for fibrelight cables and
fittings for surgical equipment
Surgical instruments -- Specification for
stainless steel
Surgical instruments -- Specification for
instruments with pivot joints (excluding
cutting instruments)
Surgical instruments -- Specification for
dissecting forceps
Surgical instruments -- Specification for
scissors, shears and other jointed cutting
instruments
Laryngoscopic fittings -- Specification for
hook-on type handle-blade fittings
Laryngoscopic fittings -- Specification for
screw threads for miniature electric lamps
BS 7213
BS 7507
BS EN 27740
BS 2574 : Part 1
BS 2574 : Part 2
BS 2574 : Part 3
BS 3531 : Part 11
BS 3531 : Part 15
BS 3531 : Part 14 : Section 14.1
BS 3531 : Part 14 : Section 14.2
BS 3531 : Part 23 : Section 23.1
BS 3531 : Part 23 : Section 23.2
BS 3531 : Part 23 : Section 23.3
BS 3531 : Part 5 : Section 5.2
and sockets
Specification for suction catheters for use
in the respiratory tract
Specification for malleable wires for use as
sutures and other surgical applications
Specification for dimensions of surgical
scalpels with detatchable blades
Lower limb orthoses -- Guide to the design
and manufacture of lower limb orthoses,
excluding foot orthoses
Lower limb orthoses -- Specification for
hip, knee and ankle joints for lower limb
orthoses
Lower limb orthoses -- Method for the
determination of mechanical properties of
metal knee joint and side member
assemblies
Implants for osteosynthesis Implants for
osteosynthesis. Specification for staples
with parallel legs
Implants for osteosynthesis Specification
for devices for the fixation of the ends of
the femur in adults
Implants for osteosynthesis Intramedullary
nailing systems Specification for the
dimensions of nails of clover leaf and Vshaped cross section and dimensions of
extraction hooks
Implants for osteosynthesis Intramedullary
nailing systems Specification for medullary
pins (Rush type) and introducer/extractors
Implants for osteosynthesis Bone plates
Method for determination of bending
strength and stiffness
Implants for osteosynthesis Bone plates
Specification for holes and slots for use
with screws of 4.5 mm, 4.2 mm, 4.0 mm,
3.9 mm, 3.5 mm and 2.9 mm nominal sizes
Implants for osteosynthesis Bone plates
Specification for holes corresponding to
screws with asymmetrical thread and
spherical undersurfaces
Implants for osteosynthesis Bone screws
and auxiliary equipment Specification for
screwdrivers for screws having heads with
single slot, cruciate slot or cross-recess
BS 3531 : Part 5 : Section 5.3
BS 3531 : Part 5 : Section 5.4
BS 3531 : Part 5 : Section 5.5
BS 3531 : Part 5 : Section 5.6
BS 3531 : Part 6 : Section 6.1
BS 3531 : Part 6 : Section 6.2
BS 3531 : Part 6 : Section 6.3
BS 6324 : Part 1
BS 6324 : Part 2
BS 6324 : Part 4
BS 6324 : Part 5
BS 6444 : Part 1
BS 6788 : Part 1
BS 6788 : Part 2
BS 6788 : Part 3
Implants for osteosynthesis Bone screws
and auxiliary equipment Specification for
the dimensions of screws having hexagonal
drive connection, spherical under-surfaces
and asymmetrical thread
Implants for osteosynthesis Bone screws
and auxiliary equipment Specification for
screws having symmetrical and
asymmetrical thread and conical
undersurfaces
Implants for osteosynthesis Bone screws
and auxiliary equipment Specification for
taps and drills
Implants for osteosynthesis Bone screws
and auxiliary equipment Specification for
the mechanical requirements and test
methods for screws having asymmetrical
thread and spherical undersurface
Implants for osteosynthesis Skeletal pins
and wires Specification for general
requirements
Implants for osteosynthesis Skeletal pins
and wires Specification for dimensions of
Steinmann skeletal pins
Implants for osteosynthesis Skeletal pins
and wires Specification for Kirschner
skeletal wires
Terms relating to surgical implants -Glossary of general medical terms
Terms relating to surgical implants -Glossary of terms relating to mechanics
Terms relating to surgical implants -Glossary of orthopaedic surgical terms
Terms relating to surgical implants -Guidance on the usage of the terms 'valgus'
and 'varus' in orthopaedic surgery
Cardiovascular implants -- Methods of test
for heart valve substitutes and requirements
for their packaging and labelling
Neurosurgical implants -- Specification for
sterile, single-use hydrocephalus shunts
and components
Neurosurgical implants -- Specification for
marking and packaging of implantable
neural stimulators
Neurosurgical implants -- Specification for
BS 6902 : Part 1
BS 6902 : Part 2
BS 7251 : Part 1
BS 7251 : Part 10
BS 7251 : Part 11
BS 7251 : Part 12
BS 7251 : Part 13
BS 7251 : Part 2
BS 7251 : Part 3
BS 7251 : Part 4
BS 7251 : Part 5
BS 7251 : Part 6
BS 7251 : Part 7
self-closing intracranial aneurysm clips
Cardiac pacemakers -- Specification for
implantable cardiac pacemakers
Cardiac pacemakers -- Method for
reporting the clinical performance of
populations of pulse generators
Orthopaedic joint prostheses -Specification for general requirements
Orthopaedic joint prostheses -- Method of
determination of endurance properties of
the head and neck region of stemmed
femoral components of hip joint prostheses
Orthopaedic joint prostheses -Specification for endurance of stemmed
femoral components without application of
torsion
Orthopaedic joint prostheses -Specification for endurance of stemmed
femoral components with application of
torsion
Orthopaedic joint prostheses -- Method for
determination of resistance to torque of
head fixation of stemmed femoral
components
Orthopaedic joint prostheses -Specification for classification, definitions
and designation of dimensions of femoral
and tibial components for partial and total
knee joint prostheses
Orthopaedic joint prostheses -Specification for classification, designation
of dimensions and requirements for hip
joint prostheses
Orthopaedic joint prostheses -Specification for bearing surfaces of hip
joint prostheses
Orthopaedic joint prostheses -- Method for
determination of endurance properties of
stemmed femoral components of hip joint
prostheses with application of torsion
Orthopaedic joint prostheses -- Method for
determination of endurance properties of
stemmed femoral components of hip joint
prostheses without application of torsion
Orthopaedic joint prostheses -- Guide to
hip joint simulators
BS 7251 : Part 8
BS 7251 : Part 9
BS 7252 : Part 1
BS 7252 : Part 10
BS 7252 : Part 11
BS 7252 : Part 2
BS 7252 : Part 4
BS 7252 : Part 5
BS 7252 : Part 6
BS 7252 : Part 7
BS 7252 : Part 8
BS 7252 : Part 9
BS 7253 : Part 1
BS 7253 : Part 2
BS 7253 : Part 3
Orthopaedic joint prostheses -- Guide to
laboratory evaluation of change of form of
bearing surfaces of hip joint prostheses
Orthopaedic joint prostheses -- Method of
determination of resistance to static load of
the head and neck region of stemmed
femoral components of hip joint prostheses
Metallic materials for surgical implants -Specification for wrought stainless steel
Metallic materials for surgical implants -Specification for wrought titanium 5aluminium 2.5-iron alloy
Metallic materials for surgical implants -Specification for wrought titanium 6aluminium 7-niobium alloy
Metallic materials for surgical implants -Specification for unalloyed titanium
Metallic materials for surgical implants -Specification for cobalt-chromiummolybdenum casting alloy
Metallic materials for surgical implants -Specification for wrought cobaltchromium-tungsten-nickel alloy
Metallic materials for surgical implants -Specification for wrought cobalt-nickelchromium-molybdenum alloy
Metallic materials for surgical implants -Specification for cobalt-chromium-nickelmolybdenum-iron alloy
Metallic materials for surgical implants -Specification for wrought cobalt-nickelchromium-molybdenum-tungsten-iron
alloy
Metallic materials for surgical implants -Specification for high-nitrogen stainless
steel
Non-metallic materials for surgical
implants -- Specification for acrylic resin
cement
Non-metallic materials for surgical
implants -- Specification for ceramic
materials based on alumina
Non-metallic materials for surgical
implants -- Specification for surgical
implants made of heat-vulcanized silicone
elastomer
BS 7253 : Part 4
BS 7253 : Part 5
BS 7254 : Part 1
BS 7254 : Part 2
BS 7254 : Part 4
BS 7254 : Part 5
BS 7254 : Part 6 : Section 6.1
BS 7254 : Part 6 : Section 6.2
BS 7313 : Part 1 : Section 1.2
BS 7313 : Part 1 : Section 1.1
BS 7313 : Part 1 : Section 1.3
BS 7313 : Part 2
BS 7313 : Part 3
BS 7313 : Part 4
BS 7730
BS 7731
BS 7778
Non-metallic materials for surgical
implants -- Specification for ultra-high
molecular mass polyethylene in powder
form
Non-metallic materials for surgical
implants -- Specification for ultra-high
molecular mass polyethylene in moulded
form
Orthopaedic implants -- Specification for
marking, packaging and labelling
Orthopaedic implants -- Specification for
general requirements for materials and
finish
Orthopaedic implants -- Recommendations
for retrieval and examination of implants
and associated tissues
Orthopaedic implants -- Specification for
production of castings made of cobaltchromium-molybdenum alloy
Orthopaedic implants -- Forgings -Specification for production of forgings
Orthopaedic implants -- Forgings -Method for specifying forgings
Prosthetics and orthotics -- Terminology -Glossary of terms relating to external limb
prostheses and wearers of external limb
prostheses
Prosthetics and orthotics -- Terminology -Glossary of general terms relating to
external limb prostheses and external
orthoses
Prosthetics and orthotics -- Terminology -Glossary of terms relating to external
orthoses
Prosthetics and orthotics -- Method of
describing limb deficiencies present at birth
Prosthetics and orthotics -- Method of
describing lower limb amputation stumps
Prosthetics and orthotics -- Method of
describing upper limb amputation stumps
Method for liquid penetrant inspection of
metallic surgical implants
Method for radiographic examination of
cast metallic surgical implants
Specification for connector assembly DF-1
for implantable cardiac defibrillators
PD 6504
BS EN 50077
BS 691
BS 1929
BS 3043
BS 5724 : Part 2 : Section 2.1
BS 5724 : Part 2 : Section 2.1 : Supplement
No. 1
BS 5724 : Part 2 : Section 2.7
BS 5724 : Part 2 : Section 2.8
BS 5724 : Part 2 : Section 2.9
BS 5724 : Part 2 : Section 2.11
BS 5724 : Part 2 : Section 2.11 :
Supplement No. 1
BS 5724 : Part 2 : Section 2.11 :
Supplement No. 2
BS 5724 : Part 2 : Section 2.15
BS 5724 : Part 3 : Section 3.1
Medical information on human reaction to
skin contact with hot surfaces
Specification for low profile connectors
(IS-1) for implantable pacemakers
Specification for solid-stem clinical
maximum thermometers (mercury-in-glass)
Specification for screw threads and
external dimensions of lamps for
endoscopic and diagnostic instruments
Specification for storage envelopes for
processed X-ray films for medical
radiography
Medical electrical equipment -- Particular
requirements for safety -- Specification for
medical electron accelerators in the range 1
MeV to 50 MeV
Medical electrical equipment -- Particular
requirements for safety -- Revised and
additional text
Medical electrical equipment -- Particular
requirements for safety -- Specification for
high-voltage generators of diagnostic X-ray
generators
Medical electrical equipment -- Particular
requirements for safety -- Specification for
therapeutic X-ray generators
Medical electrical equipment -- Particular
requirements for safety -- Specification for
dosimeters used in radiotherapy with
electrically-connected radiation detectors
Medical electrical equipment -- Particular
requirements for safety -- Specification for
gamma beam therapy equipment
Medical electrical equipment -- Particular
requirements for safety -- Specification for
gamma beam therapy equipment. Revised
and additional text
Medical electrical equipment -- Particular
requirements for safety -- Methods of test
for radiation safety
Medical electrical equipment -- Particular
requirements for safety -- Specification for
capacitor discharge X-ray generators
Medical electrical equipment -- Particular
requirements for performance -- Methods
of declaring functional performance
BS 5724 : Part 3 : Section 3.1 : Supplement
No. 1
BS 5724 : Part 3 : Section 3.26
BS 5913
BS 6038
BS 6058
BS 6126
BS 6628
BS 6641
BS 6985
BS 7534
BS 7555
BS 7725 : Part 1
BS 7725 : Part 2 : Section 2.1
BS 7725 : Part 2 : Section 2.2
BS 7725 : Part 2 : Section 2.3
characteristics of medical electron
accelerators in the range 1 MeV to 50 MeV
Medical electrical equipment -- Particular
requirements for performance -- Guide to
functional performance values
Medical electrical equipment -- Particular
requirements for performance -- Method
for declaring parameters for ultrasonic
diagnostic equipment using objects
Method of measuring and defining the
characteristics of anti-scatter grids used in
X-ray equipment
Specification for high-voltage cable plug
and socket connections for medical X-ray
equipment
Method of specifying and verifying the
characteristics of rotating anode X-ray
tubes and X-ray tube assemblies used in
medical diagnosis
Specification for dimensions of
radiographic intensifying screens for
medical use
Method for determination of the maximum
symmetrical radiation field from a rotating
anode X-ray tube for medical diagnosis
Glossary of medical radiology terms
Specification for enclosed-scale clinical
maximum thermometers (mercury-in-glass)
Specification for radiographic cassettes
(Implementation of CENELEC HD 356
S1)
Guide to miniaturization of medical
diagnostic images on film
General
Evaluation and routine testing in medical
imaging departments -- Constancy tests -Method for film processors
Evaluation and routine testing in medical
imaging departments -- Constancy tests -Method for radiographic cassettes and film
changers and film-screen contact and
relative sensitivity of the screen-cassette
assembly
Evaluation and routine testing in medical
imaging departments -- Constancy tests -Method for darkroom safelight conditions
BS ISO 4090
BS EN 60598-2-25
BS EN 60601-2-30
BS EN 60789
BS EN 61223-2-4
BS EN 61223-2-5
BS EN 61223-2-6
BS EN 61262-1
BS EN 61262-2
BS EN 61262-3
BS EN 61262-4
BS EN 61262-5
BS EN 61266
BS EN 61267
Photography. Film dimensions. Medical
radiography
Particular requirements -- Luminaires for
use in clinical areas of hospitals and health
care buildings
Particular requirements for safety -Specification for automatic cycling indirect
blood pressure monitoring equipment
Methods of test for Anger type gamma
cameras
Evaluation and routine testing in medical
imaging departments -- Constancy tests -Method for hard copy cameras
Evaluation and routine testing in medical
imaging departments -- Constancy tests -Method for image display devices
Evaluation and routine testing in medical
imaging departments -- Constancy tests -Method for X-ray equipment for computed
tomography
Characteristics of electro-optical X-ray
image intensifiers for medical electrical
equipment -- Determination of the entrance
field size
Characteristics of electro-optical X-ray
image intensifiers for medical electrical
equipment -- Determination of the
conversion factor
Characteristics of electro-optical X-ray
image intensifiers for medical electrical
equipment -- Determination of the
luminance distribution and luminance nonuniformity
Characteristics of electro-optical X-ray
image intensifiers for medical electrical
equipment -- Determination of the image
distortion
Characteristics of electro-optical X-ray
image intensifiers for medical electrical
equipment -- Determination of the
detective quantum efficiency
Ultrasonics. Hand-held probe Doppler
foetal heartbeat detectors. Performance
requirements and methods of measurement
and reporting
Radiation conditions for use in the
BS 5724 : Part 2 : Section 2.5
BS EN 61262-6
BS 5724 : Part 2 : Section 2.6
BS 5724 : Part 2 : Section 2.14
BS 5724 : Part 2 : Section 2.16
BS 5724 : Part 3 : Section 3.129
:Supplement No. 1
BS EN 61168
BS 2738 : Part 1
BS 2738 : Part 3
BS 2738 : Part 4
BS 2738 : Part 5
BS 3062
BS 3162
BS 3172
BS 3199
determination of characteristics for medical
diagnostic X-ray equipment
Medical electrical equipment -- Particular
requirements for safety -- Specification for
safety of ultrasonic therapy equipment
Characteristics of electro-optical X-ray
image intensifiers for medical electrical
equipment -- Determination of the contrast
ratio and veiling glare index
Medical electrical equipment -- Particular
requirements for safety -- Specification for
microwave therapy equipment
Medical electrical equipment -- Particular
requirements for safety -- Specification for
electroconvulsive therapy equipment
Medical electrical equipment -- Particular
requirements for safety -- Specification for
haemodialysis equipment
Medical electrical equipment -- Particular
requirements for performance -- Methods
of declaring functional performance
characteristics of radiotherapy simulators.
Guide to functional performance values
Medical electrical equipment. Particular
requirements for performance. Methods of
declaring functional performance
characteristics of radiotherapy simulators
Spectacle lenses -- Specification for
tolerances on optical properties of mounted
spectacle lenses
Spectacle lenses -- Specification for the
presentation of prescriptions and
prescription orders for ophthalmic lenses
Spectacle lenses -- Specification for singlevision and multifocal semi-finished lens
blanks
Spectacle lenses -- Specifications for
progressive power semi-finished lens
blanks
Specification for ophthalmic lens materials
Specification for ophthalmic trial case
lenses
Specification for screw threads for
spectacle frames
Specification for measuring system for
spectacle frames
BS 3521 : Part 3
BS 3521 : Part 1
BS 3521 : Part 2
BS 3668
BS 4274
BS 6625 : Part 1
BS 6625 : Part 2
BS 6903
BS 7208 : Part 1
BS 7208 : Part 2
BS 7208 : Part 3
BS 7394 : Part 1
BS 7394 : Part 2
BS ISO 11380
BS 5724 : Part 2 : Section 2.30
BS 5136
BS 6816
BS EN 21942-2
BS EN 21942-3
BS EN 21942-4
BS EN 30993-1
BS EN 30993-3
Terms relating to ophthalmic lenses and
spectacle frames Glossary of terms and
symbols relating to contact lenses
Terms relating to ophthalmic lenses and
spectacle frames Glossary of terms relating
to ophthalmic lenses
Terms relating to ophthalmic lenses and
spectacle frames Glossary of terms relating
to spectacle frames
Specification for red and green filters used
in ophthalmic dichromatic and dissociation
tests
Specification for test charts for determining
distance visual acuity
Spectacle frames -- Specification for
general requirements
Spectacle frames -- Specfication for
marking
Specification for graduated dial scales for
ophthalmic instruments
Contact lenses -- Specification for rigid
corneal and scleral contact lenses
Contact lenses -- Method of classifying
contact lens materials
Contact lenses -- Methods of test for
contact lenses
Complete spectacles -- Specification for
ready-to-wear near-vision spectacles
Complete spectacles -- Specification for
prescription spectacles
Optics and optical instruments. Ophthalmic
optics. Formers
Medical electrical equipment -- Particular
requirements for safety -- Specification for
capnometers for use with humans
Specification for toothpastes
Designation system for teeth and areas of
the oral cavity
Dental vocabulary -- Dental materials
Dental vocabulary -- Dental instruments
Dental vocabulary -- Dental equipment
Biological evaluation of medical devices -Guidance on selection of tests
Biological evaluation of medical devices -Tests for genotoxicity, carcinogenicity and
reproductive toxicity
BS EN 30993-4
BS 3366 : Part 1
BS 3366 : Part 2
BS 3507
BS 3520
BS 3886
BS 4227
BS 4284
BS 5189:Part 2
BS 5189:Part 3
BS 5612
BS 5828
BS 6039
BS 6747
BS 6790
BS 6934
BS 7013
BS 7214
PD 6540
PD 6583
Biological evaluation of medical devices -Selection of tests for interactions with
blood
Specification. Dental base metal casting
alloys -- Specification for denture base
alloys
Specification. Dental base metal casting
alloys -- Inlay, crown and bridge alloys
Specification. Orthodontic wire and tape
and dental ligature wire
Specification for dental wrought precious
metal alloy wire
Specification for dental impression
compound
Specification for dental mercury
Specification for dental impression pastes
(zinc oxide type)
Specification for Dental casting
investments -- Phosphate-bonded
investment materials
Specification for Dental casting
investments -- Ethyl silicate-bonded
investment materials
Specification for dental porcelains for
jacket crowns
Methods for biological assessment of
dental materials
Specification for dental glass ionomer
cements
Specification for orthodontic resins
Method for determination of colour
stability of dental polymeric materials
Specification for dental root canal sealing
materials
Specification for dental gypsum products
Classifies and specifies requirements and
test methods for gypsum products used for
dental purposes, e.g. oral impressions,
models, casts or dies.
Specification for dental zinc oxide/eugenol
cements and zinc oxide non-eugenol
cements
Dental implants. Guidelines for developing
dental implants
Dentistry. Information on methods
available for the determination of tarnish
BS EN ISO 1562
BS EN ISO 1567
BS EN ISO 8891
BS EN ISO 9693
BS EN 21559
BS EN 21561
BS EN 21564
BS EN 24049
BS EN 24823
BS EN 26874
BS EN 27490
BS EN 29333
BS EN 29917
BS EN 30139-1
BS 2585
BS 4222
BS 5757
BS 6828 : Part 3
BS 6828 : Part 4
BS 6828 : Part 5 : Section 5.1
BS 6828 : Part 5 : Section 5.2
BS 6828 : Part 6
and corrosion of metals and alloys
Dental casting gold alloys
Dentistry. Denture base polymers
Dental casting alloys with noble metal
content of 25% up to but not including
75%
Specification for dental ceramic fused to
metal restorative materials
Specification for alloys for dental amalgam
Specification for dental inlay casting wax
Specification for dental agar impression
material
Specification for resin-based dental filling
materials (class B)
Dental elastic impression material.
Specification for elastomeric impression
materials
Specification for dental resin-based pit and
fissure sealants
Specification for dental gypsum-bonded
casting investments for gold alloys
Specification for dental brazing materials
Specification for dental water-based
cements
Dentistry. Resilient lining materials for
removable dentures -- Specification for
short-term materials
Specification for sizes of film for dental
radiography
Specification for dimensions of the
transmission coupling (slip-joint) to dental
handpieces
Method for determination of stiffness of
the tufted area of toothbrushes
Dental rotary instruments -- Specification
for steel and carbide burs
Dental rotary instruments -- Specification
for steel and carbide finishing burs
Dental rotary instruments -- Number
coding system -- Specification for general
characteristics
Dental rotary instruments -- Number
coding system -- Specification for shape
and specific characteristics
Dental rotary instruments -- Specification
for diamond instruments
BS 6828 : Part 8 : Section 8.1
BS 6828 : Part 9
BS 7077 : Part 2 : Section 2.2
BS EN ISO 1797-1
BS EN ISO 1797-2
BS EN ISO 2157
BS EN ISO 7787-2
BS ISO 13295
BS EN 23630-2
BS EN 27493
BS EN 27785-1
BS EN 27785-2
BS EN 27786
BS EN 27787-3
BS EN 29168
BS EN 29873
BS EN 61205
BS 541
BS 808
BS 2462
BS 2646 : Part 1
Dental rotary instruments -- Cutters -Specification for steel laboratory cutters
Dental rotary instruments -- Methods of
test
Dental handpieces and accessories -Accessories -- Specification for coupling
dimensions
Dental rotary instruments. Shanks -Shanks made of metals
Dental rotary instruments. Shanks -Shanks made of plastics
Dental rotary instruments. Nominal
diameters and designation code number
Dental rotary instruments. Cutters -Carbide laboratory cutters
Dental rotary instruments. Mandrels
Dental root canal instruments -Specification for enlargers
Specification for dental operator's stool
Specification for dental handpieces -Dental handpieces and accessories.
Handpieces. Specification for high-speed
air-turbine handpieces
Specification for dental handpieces -Dental handpieces and accessories. Dental
handpieces. Specification for straight and
geared angle handpieces
Specification for dental rotary instruments.
Laboratory abrasive instruments
Specification for dental rotary instruments.
Cutters -- Carbide laboratory cutters for
milling machines
Dental handpieces. Hose connectors
Requirements specification for reusable
metal dental mirrors and handles
Specification for ultrasonics. Dental
descaler systems. Measurement and
declaration of the output characteristics
Method for determination of the RidealWalker coefficient of disinfectants
Method for assessing the efficacy of
disinfectants by the modified Chick-Martin
test
Specification for black and white
disinfectant fluids
Autoclaves for sterilization in laboratories -
BS 2646 : Part 2
BS 2646 : Part 3
BS 2646 : Part 4
BS 2646 : Part 5
BS 2745 : Part 1
BS 2745 : Part 2
BS 2745 : Part 3
BS 3265
BS 3286
BS 3970 : Part 1
BS 3970 : Part 2
BS 5197
BS 5283
BS 6392 : Part 0
BS 6392 : Part 1
BS 6392 : Part 4
- Specification for design, construction,
safety and performance
Autoclaves for sterilization in laboratories - Guide to planning and installation
Autoclaves for sterilization in laboratories - Guide to safe use and operation
Autoclaves for sterilization in laboratories - Guide to maintenance
Autoclaves for sterilization in laboratories - Methods of test for function and
performance
Washer-disinfectors for medical purposes - Specification for general requirements
Washer-disinfectors for medical purposes - Specification for human waste container
washer-disinfectors
Washer-disinfectors for medical purposes - Specification for washer-disinfectors
except those used for processing humanwaste containers and laundry
Method for the determination of tar acids in
black and white disinfectant fluids
Method for laboratory evaluation of
disinfectant activity of quaternary
ammonium compounds by suspension test
procedure
Sterilizing and disinfecting equipment for
medical products -- Sterilizing and
disinfecting equipment for medical
products Specification for general
requirements
Sterilizing and disinfecting equipment for
medical products -- Sterilizing and
disinfecting equipment for medical
products Specification for steam sterilizers
for aqueous fluids in sealed rigid containers
Specification. Aromatic disinfectant fluids
Glossary of terms relating to disinfectants
Testing of ethanol for industrial use -General introduction
Testing of ethanol for industrial use -Method for detection of alkalinity or
determination of acidity to phenolphthalein
Testing of ethanol for industrial use -Method for determination of aldehydes
content
BS 3970 : Part 3
BS 3970 : Part 4
BS 3970 : Part 5
BS 3970 : Part 6
BS 6392 : Part 2
BS 6392 : Part 3
BS 6392 : Part 5
BS 6392 : Part 6
BS 6392 : Part 7
BS 6392 : Part 8
BS 6392 : Part 9
BS 6424
Sterilizing and disinfecting equipment for
medical products -- Sterilizing and
disinfecting equipment for medical
products Specification for steam sterilizers
for wrapped goods and porous loads
Sterilizing and disinfecting equipment for
medical products -- Sterilizing and
disinfecting equipment for medical
products Specification for transportable
steam sterilizers for unwrapped instruments
and utensils
Sterilizing and disinfecting equipment for
medical products -- Sterilizing and
disinfecting equipment for medical
products Specification for low temperature
steam disinfectors
Sterilizing and disinfecting equipment for
medical products -- Sterilizing and
disinfecting equipment for medical
products Specification for sterilizers using
low-temperature steam with formaldehyde
Testing of ethanol for industrial use -Method for determination of carbonyl
compounds content present in small
amounts (photometric method)
Testing of ethanol for industrial use -Method for determination of carbonyl
compounds content present in moderate
amounts (titrimetric method)
Testing of ethanol for industrial use -Method of test for miscibility with water
Testing of ethanol for industrial use -Method for determination of methanol
content [0.01% (V/V) to 0.20% (V/V)]
(photometric method)
Testing of ethanol for industrial use -Method for determination of methanol
content [0.10% (V/V) to 1.50% (V/V)]
(visual colorimetric method)
Ethanol for industrial use -- Method for
determination of esters content
Testing of ethanol for industrial use -Method for determination of permanganate
time
Specification for QAC based aromatic
disinfectant fluids
BS 6471
BS 6734
BS 6905
BS 7152
BS 7720
DD 177
BS EN 550
BS EN 552
BS EN 554
BS EN 556
BS 748
BS 2554
BS 3985
BS 4316
BS 4851
BS EN 375
BS EN 376
BS EN 591
Method for determination of the
antimicrobial value of QAC disinfectant
formulations
Method for determination of the
antimicrobial efficacy of disinfectants for
veterinary and agricultural use
Method for estimation of concentration of
disinfectants used in 'dirty' conditions in
hospitals by the modified Kelsey-Sykes test
Guide to choice of chemical disinfectants
Specification for non-biological
sterilization indicators equivalent to the
Bowie and Dick test
Method of test for the antimicrobial
activity of disinfectants in food hygiene
Sterilization of medical devices. Validation
and routine control of ethylene oxide
sterilization
Sterilization of medical devices. Validation
and routine control of sterilization by
irradiation
Sterilization of medical devices. Validation
and routine control of sterilization by moist
heat
Sterilization of medical devices.
Requirements for terminally-sterilized
devices to be labelled `Sterile'
Specification for haemacytometer and
particle counting chambers
Specification for Westergren tubes and
support for the measurement of erythrocyte
sedimentation rate
Specification for cyanmethaemoglobin
(haemiglobincyanide) solution for
photometric haemoglobinometry
Specification for apparatus for
measurement of packed red cell volume
Specification for single use labelled
medical specimen containers for
haematology and biochemistry
Specification for labelling of in vitro
diagnostic reagents for professional use
Specification for labelling of in vitro
diagnostic reagents for self-testing
Specification for user manuals for in vitro
diagnostic instruments for professional use
BS EN 592
DD ENV 1613
DD ENV 1614
BS 4230
BS 5473
BS 6254
BS 6255
BS 6257
BS 6612
BS 6871
BS 6988
BS 7505
BS 7672
BS 1922
BS 3221 : Part 1
BS 3221 : Part 6
BS 3221 : Part 7
BS 1694
BS 1765 : Part 1
BS 1765 : Part 2
Specification for user manuals for in vitro
diagnostic instruments for home use
Medical informatics. Messages for
exchange of laboratory information
Healthcare informatics. Structure for
nomenclature, classification and coding of
properties in clinical laboratory science
Specification for metal collapsible tubes for
eye ointment
Specification for spinal and abdominal
fabric supports
Specification for creped sterilization paper
for medical use
Specification for plain sterilization paper
for medical use
Specification for paper bags for steam
sterilization for medical use
Specification for graduated compression
hosiery
Specification for heat-sealable pouches and
tube material converted from transparent
plastics film and paper for steam
sterilization for medical use
Method for determination of the adhesion
of autoclave tape to tray wrap material
Specification for the elastic properties of
flat, non-adhesive, extensible fabric
bandages
Specification for compression, stiffness and
labelling of anti-embolism hosiery
Specification for glass dispensing measures
for pharmaceutical purposes
Medicine measures -- Specification for
medicine measures of 50 mL total
graduated capacity
Medicine measures -- Specification for
free-standing plastics medicine measuring
spoons of 5 mL capacity
Medicine measures -- Specification for oral
syringes delivering doses of less than 5 mL
Specification for hospital ward cots for
children
Specification for hospital bedside lockers -Specification for general purpose bedside
lockers for patients
Specification for hospital bedside lockers --
BS 1823
BS 1895
BS 1979
BS 2099
BS 2588 : Part 1
BS 2588 : Part 2
BS 2718
BS 2838 : Part 1
BS 2838 : Part 2
BS 2881
BS 2891
BS 3107
BS 3215
BS 3316 : Part 1
BS 3316 : Part 2
BS 3316 : Part 3
BS 3316 : Part 4
BS 3475
BS 3516
General purpose lockers of wooden
construction with facilities for hanging day
clothes
Specification for stainless steel hollowware for use in hospital operating-theatres
and wards
Specification for metal-framed wheeled
screens for use in hospitals
Specification for hospital ward bedsteads
for psychiatric hospitals
Specification for castors for hospital
equipment
Portable sanitary pans for use in healthcare
establishments -- Specification for reusable
bed pans
Portable sanitary pans for use in healthcare
establishments -- Specification for reusable
pans for commode chairs
Specification for gas cylinder trolleys
Examination and general treatment couches
-- Specification for fixed height couches
Examination and general treatment couches
-- Specification for variable height couches
Specification for cupboards for the storage
of medicines in health care premises
Specification for operating table mattresses
and mattress sections
Specification for small incinerators
Specification for reusable portable urinals
Incinerators -- Specification for standard
performace requirements for incineration
plant for the destruction of hospital waste
Incinerators -- Methods of test and
calculation for the performance of
incineration plant for the destruction of
hospital waste
Incinerators -- Method for specifying
purchasers' requirements for incineration
plant for the destruction of hospital waste
Incinerators -- Code of practice for the
design, specification, installation and
commissioning of incineration plant for the
destruction of hospital waste
Specification for bowl stands for use in
hospitals
Specification for chairs for chiropodists'
BS 3619
BS 3622
BS 3878
BS 4005
BS 4068
BS 4322
BS 4376
BS 4376 : Part 1
BS 4533: Part 102: Section 102.55
BS 4751
BS 4886
BS 5076
BS 4533: Part 103: Section 103.2
BS 5223:Part 1
BS 5223:Part 2
BS 5223:Part 3
BS 5223:Part 4
BS 5402
BS 5724 : Part 2 : Section 2.22
BS 5827
BS 5853
patients
Specification. Mobile infusion stands
Specification for general purpose stools
and anaesthetists' chairs for hospital use
Specification for flexible PVC sheeting for
hospital use
Single use, sterilized surgical rubber gloves
Specification for hospital trolleys for
instruments, dressings and for anaesthetists'
use including angular trolleys
Recommendations for buffering on hospital
vehicles such as trolleys
Specification for electrically operated
blood storage refrigerators
Electrically operated blood storage
refrigerators -- Specification for closed
reach-in types
Luminaires -- Particular requirements -Specification for luminaires for hospitals
and health care buildings
Specification for mobile sanitary chairs
Specification for hospital bedsteads
Specification for hospital storage cabinets
for bottled fluids (electrically heated)
Luminaires -- Performance requirements -Specification for photometric
characteristics of luminaires for hospitals
and health care buildings
Specification for hospital bedding -- Adult
size spring interior mattresses
Specification for hospital bedding -Combustion modified, flexible
polyurethane, general purpose foam
mattress cores
Specification for hospital bedding -Flexible polyurethane pillows
Specification for hospital bedding -Mattress covers of polyurethane coated
nylon
Specification for patient trolleys
Medical electrical equipment -- Particular
requirements for safety -- Specification for
general operating tables
Specification for mobile, manually
operated patient-lifting devices
Specification for medicine trolleys
BS 6153
BS 6242
BS 6859 : Part 1
BS 6859 : Part 2
BS 7126: Part 1
BS 7126: Part 2
BS 7127: Part 1
BS 7320
BS 7460
BS 7710 : Part 1
BS 7710 : Part 2
BS 7710 : Part 3
BS EN 455-1
BS 7088
BS 7497
BS 4922
BS 4986
BS 4988
BS 4997
BS 5104
BS 5181
BS 5205
BS 5619
BS 5810
BS 5943
Specification for oropharyngeal airways
Specification for single use unlabelled
medical specimen containers for
haematology and biochemistry
Operating tables -- Specification for mobile
general operating tables
Operating tables -- Specification for fixedpedestal general operating tables
Urine collection bags -- Glossary of terms
Urine collection bags -- Method for
determination of dimensions
Ostomy collection bags -- Glossary of
terms
Specification for sharps containers
Code of practice for use of spray extraction
machines on carpets and soft floor
coverings in hospitals
Urine absorbing aids. Vocabulary -Conditions of urinary incontinence
Urine absorbing aids. Vocabulary -Products
Urine absorbing aids. Vocabulary -Identification of product types
Medical gloves for single use -Specification for freedom from holes
Specification for pneumatic tourniquet
equipment
Specification for rigid stretchers
Specification for metal tripod and tetrapod
walking sticks
Specification for fixed height walking
frames
Specification for elbow crutches
Specification for wooden axilla crutches
Specification for adjustable height walking
frames
Specification for wooden walking sticks
Specification for adjustable metal walking
sticks
Code of practice for design of housing for
the convenience of disabled people
Code of practice for access for the disabled
to buildings
Methods for measurement and recording
for orthopaedic footwear
BS 6440
BS 6935 : Part 5
BS 6936
BS 6937
BS EN 29999
BS 4028
BS 2909
BS 6155
BS 7659
BS 903 : Part A10
BS 7567 : Part 1
BS 7567 : Part 2
BS 7567 : Part 3
BS 7666 : Part 1
BS 7666 : Part 2
BS 7666 : Part 3
DD ENV 1613
DD ENV 1614
DD ENV 1068
Code of practice for powered lifting
platforms for use by disabled persons
Wheelchair tests -- Methods for
determination of overall dimensions, mass
and turning space
Method for designation of types of
wheelchair
Glossary of wheelchair terms
Technical aids for disabled persons.
Classification
Specification for reusable contraceptive
diaphragms
Specification for cabinets for the electrical
euthanasia of dogs
Specification for tracheal tubes for large
animals in veterinary anaesthesia
Specification for dog muzzles
Methods of Testing Vulcanized Rubber Part A10 : Determination of Flex Cracking
(De Mattia)
Electronic transfer of geographic
information (NTF) -- Specification for NTF
structures
Electronic transfer of geographic
information (NTF) -- Specification for
implementing plain NTF
Electronic transfer of geographic
information (NTF) -- Specification for
implementing NTF using BS 6690
Spatial data-sets for geographical
referencing -- Specification for a Street
Gazetteer
Spatial data-sets for geographical
referencing -- Specification for a Street
Gazetteer -- Specification for a land and
property Gazetteer
Spatial data-sets for geographical
referencing -- Specification for addresses
Medical informatics. Messages for
exchange of laboratory information
Healthcare informatics. Structure for
nomenclature, classification and coding of
properties in clinical laboratory science
Medical informatics. Health care
information interchange. Registration of
coding schemes
BS 7750
BS 903 : Part A18
BS 903 : Part A16
BS 903 : Part A9
BS ISO 6850
BS ISO 7766-1
BS ISO 10348
BS 792
BS 1136
BS 1703
BS 3107
BS 3316 : Part 1
BS 903 : Part A56
BS 3316 : Part 2
BS 3316 : Part 3
BS 3316 : Part 4
BS 3495
BS 3735
Specification for environmental
management systems
Methods of Testing Vulcanized Rubber Part A18 : Determination of Equilibrium
Water Vapour Absorption
Methods of Testing Vulcanized Rubber Part A16 : Determination of the Effect of
Liquids
Methods of Testing Vulcanized Rubber Part A9 : Determination of Abrasion
Resistance
Photography. Processing wastes.
Determination of nitrate by a spectrometric
method using brucine
Photography. Processing wastes. Analysis
of cyanides -- Determination of
hexacyanoferrate(II) and
hexacyanoferrate(III) by spectrometry
Photography. Processing wastes.
Determination of silver content
Specification for mild steel dustbins
Specification for mild steel refuse storage
containers
Specification for refuse chutes and hoppers
Specification for small incinerators
Incinerators -- Specification for standard
performace requirements for incineration
plant for the destruction of hospital waste
Methods of Testing Vulcanized Rubber Part A56 : Determination of Adhesion to
Wire Cord
Incinerators -- Methods of test and
calculation for the performance of
incineration plant for the destruction of
hospital waste
Incinerators -- Method for specifying
purchasers' requirements for incineration
plant for the destruction of hospital waste
Incinerators -- Code of practice for the
design, specification, installation and
commissioning of incineration plant for the
destruction of hospital waste
Specification for aluminium refuse storage
containers
Specification for plastics and rubber
dustbin lids
BS 3813 : Part 1
BS 4998
BS 5832
BS 5906
BS 1339
BS 1747 : Part 1
BS 1747 : Part 10
BS 1747 : Part 11
BS 1747 : Part 12
BS 1747 : Part 2
BS 1747 : Part 3
BS 1747 : Part 5
BS 1747 : Part 6
BS 3928
BS 5243
BS 1747 : Part 7
BS 1747 : Part 8
Specification for incinerators for waste
from trade and residential premises -Capacities between 50 lb/h and 1000 lb/h
Specification for moulded thermoplastics
dustbins (excluding lids)
Specification for compacted waste
containers for lift-off vehicles
Code of practice for storage and on-site
treatment of solid waste from buildings
Definitions, formulae and constants
relating to the humidity of the air
Methods for measurement of air pollution - Deposit gauges
Methods for measurement of air pollution - Determination of the mass concentration
of sulphur dioxide in ambient air :
tetrachloromercurate (TCM)/pararosaniline
method
Methods for measurement of air pollution - Determination of a black smoke index in
ambient air
Methods for measurement of air pollution - Determination of the mass concentration
of ozone in ambient air :
chemiltuninescence method
Methods for measurement of air pollution - Determination of concentration of
suspended matter
Methods for measurement of air pollution - Determination of sulphur dioxide
Methods for measurement of air pollution - Directional dust gauges
Methods for measurement of air pollution - Sampling equipment used for the
determination of gaseous sulphur
compounds in ambient air
Method for sodium flame test for air filters
(other than for air supply to I.C. engines
and compressors)
General principles for sampling airborne
radioactive materials
Methods for measurement of air pollution - Determination of mass concentration of
sulphur dioxide in ambient air : Thorin
spectrophotometric method
Methods for measurement of air pollution -
BS 1747 : Part 9
BS 6068 : Part 2 : Section 2.37
BS 6069 : Part 1
BS 6069 : Part 2
BS 6069 : Part 3 : Section 3.1
BS 6069 : Part 3 : Section 3.2
BS 6069 : Part 3 : Section 3.3
BS 6069 : Part 3 : Section 3.4
BS 6069 : Part 4 : Section 4.1
BS 6069 : Part 4 : Section 4.2
BS 6069 : Part 4 : Section 4.3
- Determination of the mass concentration
of nitrogen dioxide in ambient air :
modified Griess-Saltzman method
Methods for measurement of air pollution - Determination of the mass concentration
of nitrogen oxides in ambient air :
chemiluminescence method
Water quality -- Physical, chemical and
biochemical methods -- Method for the
determination of chloride via a silver
nitrate titration with chromate indicator
(Mohr's method)
Characterization of air quality -- Units of
measurement
Characterization of air quality -- Glossary
Characterization of air quality -Workplace atmospheres -- Method for the
determination of vinyl chloride using a
charcoal tube and a gas chromatograph
Characterization of air quality -Workplace atmospheres -- Method for the
determination of particulate lead and lead
compounds by flame atomic absorption
spectrometry
Characterization of air quality -Workplace atmospheres -- Method for the
determination of vaporous chlorinated
hydrocarbons by charcoal tube/solvent
desorption/gas chromatography
Characterization of air quality -Workplace atmospheres -- Method for the
determination of vaporous aromatic
hydrocarbons by charcoal tube/solvent
desorption/gas chromatography
Characterization of air quality -- Stationary
source emissions -- Method for the
determination of the mass concentration of
sulphur dioxide: hydrogen peroxide/barium
perchloratefrhorin method/thorin method
Characterization of air quality -- Stationary
source emissions -- Method for the
determination of asbestos plant emissions
by fibre count measurement
Characterization of air quality -- Stationary
source emissions -- Method for the manual
gravimetric determination of concentration
BS 6069 : Part 4 : Section 4.4
BS 6069 : Part 5 : Section 5.1
BS 7643 : Part 2
BS ISO 10312
BS 5295 : Part 0
BS 1747 : Part 13
BS 5295 : Part 1
BS 5295 : Part 2
BS 5295 : Part 3
BS 5295 : Part 4
BS 5343 : Part 1
BS 5343 : Part 2
BS 6691 : Part 1
and mass flow rate of particulate material
in gas- carrying ducts
Characterization of air quality -- Stationary
source emissions -- Determination of the
mass concentration of sulfur dioxide.
Performance characteristics of automated
measuring methods
Characterization of air quality -Characterization of air quality. General -Handling of temperature, pressure and
humidity data
Building construction. Expression of users'
requirements -- Air purity requirements
Ambient air. Determination of asbestos
fibres. Direct-transfer transmission electron
microscopy method
Environmental cleanliness in enclosed
spaces -- General introduction, terms and
definitions for clean rooms and clean air
devices
Methods for measurement of air pollution - Determination of the particulate lead
content of aerosols collected on filters :
atomic absorption spectrometric method
Environmental cleanliness in enclosed
spaces -- Specification for clean rooms and
clean air devices
Environmental cleanliness in enclosed
spaces -- Method for specifying the design,
construction and commissioning of clean
rooms and clean air devices
Environmental cleanliness in enclosed
spaces -- Guide to operational procedures
and disciplines applicable to clean rooms
and clean air devices
Environmental cleanliness in enclosed
spaces -- Specification for monitoring clean
room and clean air devices to prove
continued compliance with BS 5295 : Part
1
Gas detector tubes -- Specification for short
term gas detector tubes
Gas detector tubes -- Specification for long
term gas detector tubes
Fume from welding and allied processes -Guide to methods for the sampling and
BS 6691 : Part 2
BS ISO 10551
BS EN 481
BS EN 482
BS 1756 : Part 1
BS 1756 : Part 2
BS 1756 : Part 3
BS 1756 : Part 4
BS 1756 : Part 5
BS 2741
BS 2742
BS 2811
BS 3048
BS 1427
BS 6068 : Part 1 : Section 1.1
BS 6068 : Part 1 : Section 1.3
BS 6068 : Part 1 : Section 1.4
BS ISO 10155
analysis of particulate matter
Fume from welding and allied processes -Guide to methods for the sampling and
analysis of gases
Ergonomics of the thermal environment.
Assessment of the influence of the thermal
environment using subjective judgement
scales
Workplace atmospheres. Size fraction
definitions for measurement of airborne
particles
Workplace atmospheres. General
requirements for the performance of
procedures for the measurement of
chemical agents
Methods for sampling and analysis of flue
gases -- Methods of sampling
Methods for sampling and analysis of flue
gases -- Analysis by the Orsat apparatus
Methods for sampling and analysis of flue
gases -- Analysis by the Haldane apparatus
Methods for sampling and analysis of flue
gases -- Miscellaneous analyses
Methods for sampling and analysis of flue
gases -- Semi-routine analyses
Recommendations for the construction of
simple smoke viewers
Notes on the use of the Ringelmann and
miniature smoke charts
Specification for smoke density indicators
and recorders
Code for the continuous sampling and
automatic analysis of flue gases : indicators
and recorders
Guide to field and on-site test methods for
the analysis of waters
Water quality -- Glossary -- Terms relating
to types of water, and treatment and storage
of waste water
Water quality -- Glossary -- An additional
90 terms
Water quality -- Glossary -- An additional
18 terms
Stationary source emissions. Automated
monitoring of mass concentrations of
particles. Performance characteristics, test
BS 6068 : Part 1 : Section 1.2
BS 6068 : Part 1 : Section 1.5
BS 6068 : Part 1 : Section 1.6
BS 6068 : Part 1 : Section 1.7
BS 6068 : Part 1 : Section 1.8
BS 6068 : Part 2 : Section 2.10
BS 6068 : Part 2 : Section 2.11
BS 6068 : Part 2 : Section 2.12
BS 6068 : Part 2 : Section 2.14
BS 6068 : Part 2 : Section 2.17
BS 6068 : Part 2 : Section 2.18
BS 6068 : Part 2 : Section 2.19
BS 6068 : Part 2 : Section 2.2
BS 6068 : Part 2 : Section 2.20
methods and specifications
Water quality -- Glossary -- Additional
terms relating to types of water, and
treatment and storage of water and waste
water, and terms used in sampling and
analysis of water
Water quality -- Glossary -- An additional
49 terms
Water quality -- Glossary -- An additional
42 terms
Water quality -- Glossary -- An additional
47 terms
Water quality -- Glossary -- An additional
66 terms
Water quality -- Physical, chemical and
biochemical methods -- Determination of
ammonium: potentiometric method
Water quality -- Physical, chemical and
biochemical methods -- Determination of
ammonium: manual spectrometric method
Water quality -- Physical, chemical and
biochemical methods -- Determination of
phenol index: 4-aminoantipyrine (4aminophenazone) spectrometric methods
after distillation
Water quality -- Physical, chemical and
biochemical methods -- Determination of
biochemical oxygen demand after 5 days
(BOD5): dilution and seeding methods
Water quality -- Physical, chemical and
biochemical methods -- Methods for
determination of total cyanide
Water quality -- Physical, chemical and
biochemical methods -- Methods for the
determination of easily liberatable cyanide
Water quality -- Physical, chemical and
biochemical methods -- Method for
determination of cyanogen chloride
Water quality -- Physical, chemical and
biochemical methods -- Determination of
iron: 1,10-phenanthroline photometric
method
Water quality -- Physical, chemical and
biochemical methods -- Method for
determination of cyanide by diffusion at
pH 6
BS 6068 : Part 2 : Section 2.24
BS 6068 : Part 2 : Section 2.25
BS 6068 : Part 2 : Section 2.29
BS 903 : Part A57
BS 903 : Part A13
BS 6068 : Part 2 : Section 2.26
BS 6068 : Part 2 : Section 2.27
BS 6068 : Part 2 : Section 2.28
BS 6068 : Part 2 : Section 2.30
BS 6068 : Part 2 : Section 2.36
BS 6068 : Part 2 : Section 2.37
BS 6068 : Part 2 : Section 2.39
Water quality -- Physical, chemical and
biochemical methods -- Method for the
determination of non-ionic surfactants
using Dragendorff reagent
Water quality -- Physical, chemical and
biochemical methods -- Method for
determination of free chlorine and total
chlorine: titrimetric method using N,Ndiethyl-1,4-phenylenediamine
Determination of cobalt, nickel, copper,
zinc, cadmium and lead: flame atomic
absorption spectrometric methods
Physical Testing of Rubber - Part A57 :
Determination of Indentation Hardness by
Means of Pocket Hardness Meters
Physical Testing of Rubber - Part A13 :
Method for Determination of Stiffness at
Low Temperature (Gehman Test)
Water quality -- Physical, chemical and
biochemical methods -- Method for
determination of free chlorine and total
chlorine: colorimetric method using N,Ndiethyl-1,4-phenylenediamine, for routine
control purposes
Water quality -- Physical, chemical and
biochemical methods -- Method for
determination of total chlorine : iodometric
titration method
Water quality -- Physical, chemical and
biochemical methods -- Method for the
determination of phosphorus: ammonium
molybdate spectrometric method
Water quality -- Physical, chemical and
biochemical methods -- Method for
determination of calcium and magnesium
by atomic absorption spectrometric method
Water quality -- Physical, chemical and
biochemical methods -- Spectrometric
method for the determination of nitrate
using sulphosalicylic acid
Water quality -- Physical, chemical and
biochemical methods -- Method for the
determination of chloride via a silver
nitrate titration with chromate indicator
(Mohr's method)
Water quality -- Physical, chemical and
BS 6068 : Part 2 : Section 2.4
BS 6068 : Part 2 : Section 2.40
BS 6068 : Part 2 : Section 2.41
BS 6068 : Part 2 : Section 2.42
BS 6068 : Part 2 : Section 2.43
BS 6068 : Part 2 : Section 2.44
BS 6068 : Part 2 : Section 2.45
BS 6068 : Part 2 : Section 2.50
BS 6068 : Part 2 : Section 2.7
BS 6068 : Part 2 : Section 2.8
biochemical methods -- Method for the
determination of sulphate using barium
chloride and gravimetry
Water quality -- Physical, chemical and
biochemical methods -- Determination of
total mercury by flameless atomic
absorption spectrometry: method after
digestion with permanganateperoxodisulphate
Water quality -- Physical, chemical and
biochemical methods -- Method for the
determination of borate by spectrometry
using azomethine-H
Water quality -- Physical, chemical and
biochemical methods -- Determination of
fluoride: electrochemical probe method for
potable and lightly polluted water
Water quality -- Physical, chemical and
biochemical methods -- Determination of
sodium and potassium: determination of
sodium by atomic absorption spectrometry
Water quality -- Physical, chemical and
biochemical methods -- Determination of
sodium and potassium: determinatipn of
potassium by atomic absorption
spectrometry
Water quality -- Physical, chemical and
biochemical methods -- Determination of
sodium and potassium: determination of
sodium and potassium by flame emission
spectrometry
Water quality -- Physical, chemical and
biochemical methods -- Water quality.
Physical, chemical and biochemical
methods. Determination of selenium by
atomic absorption spectrometry
Water quality -- Physical, chemical and
biochemical methods -- Determination of
pH
Water quality -- Physical, chemical and
biochemical methods -- Determination of
ammonium: distillation and titration
method
Water quality -- Physical, chemical and
biochemical methods -- Determination of
calcium content: EDTA titrimetric method
BS 6068 : Part 2 : Section 2.47
BS 6068 : Part 2 : Section 2.48
BS 6068 : Part 2 : Section 2.49
BS 6068 : Part 2 : Section 2.5
BS 6068 : Part 2 : Section 2.6
BS 6068 : Part 2 : Section 2.9
BS 6068 : Part 3 : Section 3.1
BS 6068 : Part 3 : Section 3.2
BS 6068 : Part 4 : Section 4.2
BS 6068 : Part 4 : Section 4.3
BS 6068 : Part 4 : Section 4.4
BS 6068 : Part 4 : Section 4.5
Water quality -- Physical, chemical and
biochemical methods -- Determination of
chromium (VI). Spectrometric method
using 1,5-diphenylcarbazide
Water quality -- Physical, chemical and
biochemical methods -- Determination of
inorganically bound total fluoride after
digestion and distillation
Water quality -- Physical, chemical and
biochemical methods -- Determination of
aluminium. Spectrometric method using
pyrocatechol violet
Water quality -- Physical, chemical and
biochemical methods -- Determination of
total mercury by flameless atomic
absorption spectrometry: method after
pretreatment with ultraviolate radiation
Water quality -- Physical, chemical and
biochemical methods -- Determination of
total mercury by flameless atomic
absorption spectrometry: method after
digestion with bromine
Water quality -- Physical, chemical and
biochemical methods -- Determination of
the sum of calcium and magnesium: EDTA
titrimetric method
Water quality -- Radiological methods -Measurement of gross alpha activity in
non-saline water: thick source method
Water quality -- Radiological methods -Measurement of gross beta activity in nonsaline water
Water quality -- Microbiological methods - Guide to the enumeration of microorganism by culture
Water quality -- Microbiological methods - Detection and enumeration (most
probable number) of faecal streptococci by
the multiple tube technique
Water quality -- Microbiological methods - Detection and enumeration of faecal
streptococci by the membrane filtration
technique
Water quality -- Microbiological methods - Method for the enumeration of viable
micro-organisms: colony count by
BS 6068 : Part 5 : Section 5.16
BS 903 : Part A15
BS 903 : Part A43
BS 6068 : Part 5 : Section 5.17
BS 6068 : Part 6 : Section 6.10
BS 6068 : Part 6 : Section 6.11
BS 6068 : Part 5 : Section 5.2
BS 6068 : Part 5 : Section 5.3
BS 6068 : Part 5 : Section 5.4
BS 6068 : Part 6 : Section 6.4
BS 903 : Part A8
inoculation in or on a nutrient agar culture
medium
Water quality -- Biological methods -Evaluation in an aqueous medium of the
'ultimate' aerobic biodegradability of
organic compounds. Methods by analysis
of biochemical oxygen demand (closed
bottle test)
Physical Testing of Rubber - Part A15 :
Method for Creep in Compression
Physical testing of rubber - Part A43 :
Method for determination of resistance to
ozone cracking (static strain test)
Water quality -- Biological methods -Determination of the prolonged toxicity of
substances to freshwater fish. Method for
evaluating the effects of substances on the
growth rate of rainbow trout
lOncorhynchus roykiss Walbaum
(Teleostei, Salmonidae)]
Water quality -- Sampling -- Guidance on
sampling of waste waters
Water quality -- Sampling -- Guidance on
sampling of groundwaters
Water quality -- Biological methods -Determination of the acute lethal toxicity of
substances to a freshwater fish
[Brachydanio rerio Hamilton-Buchanan
(Teleostei, Cyprinidae)]: static method
Water quality -- Biological methods -Determination of the acute lethal toxicity of
substances to a freshwater fish
[Brachydanio rerio Hamilton-Buchanan
(Teleostei, Cyprinidae)]: semi-static
method
Water quality -- Biological methods -Determination of the acute lethal toxicity of
substances to a freshwater fish
[Brachydanio rerio Hamilton-Buchanan
(Teleostei, Cyprinidae)]: flow-through
method
Water quality -- Sampling -- Guidance on
sampling from lakes, natural and manmade
Physical testing of rubber - Part A8 :
Method for determination of rebound
BS 903 : Part A38
BS 6068 : Part 6 : Section 6.6
BS 6068 : Part 6 : Section 6.7
BS 6068 : Part 6 : Section 6.8
BS 6068 : Part 6 : Section 6.9
BS 7593
BS EN ISO 5961
BS EN ISO 7887
BS EN ISO 8467
BS EN ISO 9391
BS EN ISO 10304-1
BS EN ISO 10634
BS EN 25663
BS 903 : Part A6
BS EN 25667-1
BS EN 25667-2
resilience
Physical Testing of Rubber - Part A38 :
Methods for the Determination of
Dimensions of Test Pieces and Products for
Test Purposes
Water quality -- Sampling -- Guidance on
sampling of rivers and streams
Water quality -- Sampling -- Guidance on
sampling of water and stem-' in boiler
plants
Water quality -- Sampling -- Guidance on
sampling of wet deposition
Water quality -- Sampling -- Guidance on
sampling from marine waters
Code of practice for treatment of water in
domestic hot water central heating systems
Water quality. Determination of cadmium
by atomic absorption spectrometry
Water quality. Examination and
determination of colour
Water quality. Determination of
permanganate index
Water quality. Sampling in deep water for
macro-invertebrates. Guidance on the use
of colonization, qualitative and quantitative
samplers
Water quality. Determination of dissolved
fluoride, chloride, nitrite, orthophosphate,
bromide, nitrate and sulfate ions, using
liquid chromatography of ions -- Method
for water with low contamination
Water quality. Guidance for the preparation
and treatment of poorly water-soluble
organic compounds for the subsequent
evaluation of their biodegradability in an
aqueous medium
Water quality. Determination of Kjeldahl
nitrogen. Method after mineralization with
selenium
Physical Testing of Rubber - Part A6 :
Method for Determination of Compression
Set at Ambient, Elevated or Low
Temperatures
Water quality. Sampling -- Guidance on the
design of sampling programmes
Water quality. Sampling -- Water quality.
BS EN 25813
BS EN 25814
BS EN 26461-1
BS EN 26461-2
BS EN 26595
BS EN 26777
BS EN 27027
BS EN 27828
BS EN 27888
BS EN 28265
BS EN 28692
BS EN 29408
BS EN 29439
Sampling. Guidance on sampling
techniques
Water quality. Determination of dissolved
oxygen. Iodometric method
Method for determination of dissolved
oxygen in water : electrochemical probe
method
Water quality. Detection and enumeration
of the spores of sulfite-reducing anaerobes
(Clostridia) -- Water quality. Detection and
enumeration of the spores of sulfitereducing anaerobes (Clostridia). Method by
enrichment in a liquid medium
Water quality. Detection and enumeration
of the spores of sulfite-reducing anaerobes
(Clostridia) -- Method by membrane
filtration
Water quality. Determination of total
arsenic. Silver diethyldithiocarbamate
spectrophotometric method
Water quality. Physical, chemical and
biochemical methods. Determination of
nitrite : molecular absorption spectrometric
method
Water quality. Determination of turbidity
Water quality. Methods for biological
testing. Methods of biological sampling :
guidance on handnet sampling of aquatic
benthic macro-invertebrates
Water quality. Method for the
determination of electrical conductivity
Water quality. Biological methods.
Methods of biological sampling : guidance
on the design and use of quantitative
samplers for benthic macro-invertebrates
on stony substrata in shallow freshwater
Water quality. Biological methods. Fresh
water algal growth inhibition test with
Scenedesmus subspicatus and Selenastrum
capricornutum
Water quality. Evaluation in an aqueous
medium of the "ultimate" aerobic
biodegradability of organic compounds :
method by determining the oxygen demand
in a closed respirometer
Water quality. Evaluation in an aqueous
BS EN 29888
BS 6316
BS 6281 : Part 1
BS 6281 : Part 2
BS 6281 : Part 3
BS 6572
BS 6730
BS 903 : Part C5
BS 903 : Part C1
BS 903 : Part A44
BS 6920 : Part 1
BS 6920 : Part 2 : Section 2.2 : Subsection
2.2.1
medium of the "ultimate" aerobic
biodegradability of organic compounds :
method by analysis of released carbon
dioxide
Water quality. Evaluation of the aerobic
biodegradability of organic compounds in
an aqueous medium. Static test (ZahnWellens method)
Code of Practice for test pumping of water
wells
Devices without moving parts for the
prevention of contamination of water by
backflow -- Specification for type A air
gaps
Devices without moving parts for the
prevention of contamination of water by
backflow -- Specification for type B air
gaps
Devices without moving parts for the
prevention of contamination of water by
backflow -- Specification for pipe
interrupters of nominal size up to and
including DN 42
Specification for blue polyethylene pipes
up to nominal size 63 for below ground use
for potable water
Specification for black polyethylene pipes
up to nominal size 63 for above ground use
for cold potable water
Physical testing of rubber - Part C5 :
Determination of insulation resistance
Methods of Testing Vulcanized Rubber Part C1 : Determination of Surface
Resistivity
Physical Testing of Rubber - Part A44 :
Method for Determination of Resistance to
Ozone Cracking (Dynamic Strain Test)
Suitability of non-metallic products for use
in contact with water intended for human
consumption with regard to their effect on
the quality of the water -- Specification
Suitability of non-metallic products for use
in contact with water intended for human
consumption with regard to their effect on
the quality of the water -- Methods of test - General method of test
BS 6920 : Part 2 : Section 2.2 : Subsection
2.2.2
BS 903 : Part A42
BS 903 : Part A14
BS 6920 : Part 2 : Section 2.2 : Subsection
2.2.3
BS 6920 : Part 2 : Section 2.4
BS 6920 : Part 2 : Section 2.5
BS 6920 : Part 2 : Section 2.6
BS 6920 : Part 3
BS 7766
BS EN 903
Suitability of non-metallic products for use
in contact with water intended for human
consumption with regard to their effect on
the quality of the water -- Methods of test - Method of testing tastes imparted to water
by hoses
Physical Testing of Rubber - Part A42 :
Method for Determination of Stress
Relaxation in Compression at Ambient and
at Elevated Temperatures
Physical Testing of Rubber - Part A14 :
Method for Determination of Modulus in
Shear or Adhesion to Rigid Plates Quadruple Shear Method
Suitability of non-metallic products for use
in contact with water intended for human
consumption with regard to their effect on
the quality of the water -- Methods of test - Method of testing tastes imparted to water
by hoses for conveying water for foo
Suitability of non-metallic products for use
in contact with water intended for human
consumption with regard to their effect on
the quality of the water -- Methods of test - Growth of aquatic microorganisms
Suitability of non-metallic products for use
in contact with water intended for human
consumption with regard to their effect on
the quality of the water -- Methods of test - The extraction of substances that may be
of concern to public health
Suitability of non-metallic products for use
in contact with water intended for human
consumption with regard to their effect on
the quality of the water -- Methods of test - The extraction of metals
Suitability of non-metallic products for use
in contact with water intended for human
consumption with regard to their effect on
the quality of the water -- High temperature
tests
Specification for assessment of the
potential for metallic materials to affect
adversely the quality of water intended for
human consumption
Water quality. Determination of anionic
BS 2690 : Part 102
BS 2690 : Part 104
BS 903 : Part A36
BS 903 : Part A12
BS 903 : Part A35
BS 903 : Part A1
BS 2690 : Part 115
BS 2690 : Part 116
BS 2690 : Part 117
BS 903 : Part A48
BS 903 : Part A49
BS 903 : Part A50
BS 2690 : Part 15
BS 3148
BS 1247 : Part 1
surfactants by measurement of the
methylene blue index MBAS
Methods of testing water used in industry -Hydrazine : spectrophotometric method (4dimethylaminobenzaldehyde)
Methods of testing water used in industry -Silica : reactive, total and suspended
Physical testing of rubber - Part A36 :
Method for preparation of samples and test
pieces
Physical testing of rubber - Part A12 :
Method for determination of the adhesion
strength to textile fabric
Physical Testing of Rubber - Part A35 :
Temperatures, Humidities and Times for
Conditioning and Testing of Test Pieces
Physical Testing of Rubber - Part A1 :
Determination of Density
Methods of testing water used in industry -Cyclohexylamine : spectrophotometric
method
Methods of testing water used in industry -Morpholine : spectrophotometric method
Methods of testing water used in industry -Long-chain fatty amines :
spectrophotometric method
Methods of Testing Vulcanized Rubber Part A48 : Determination of Static
Adhesion to Textile Cord (H-pull Test)
Methods of Testing Vulcanized Rubber Part A49 : Determination of Temperature
Rise and Resistance to Fatigue in
Flexometer Testing (Basic Principles)
Methods of Testing Vulcanized Rubber Part A50 : Determination of Temperature
Rise and Resistance to Fatigue in
Flexometer Testing (Compression
Flexometer)
Methods of testing water used in industry -Free EDTA, total salts of EDTA,
polyacrylate and polymethacrylate
Methods of test for water for making
concrete (including notes on the suitability
of the water)
Manhole steps -- Specification for
galvanized ferrous or stainless steel
BS 1247 : Part 2
BS 1247 : Part 3
BS 6297
BS 903 : Part A11
BS 7781
BS 8005 : Part 1
BS 8005 : Part 2
BS 8005 : Part 3
BS 8005 : Part 4
BS 8005 : Part 5
BS ISO 7766-1
BS ISO 6850
BS ISO 10348
BS 1170
BS 4974
BS 3882
BS 7755 : Part 3 : Section 3.1
BS 7755 : Part 2 : Section 2.6
manhole steps
Manhole steps -- Specification for plastics
encapsulated manhole steps
Manhole steps -- Specification for
aluminium manhole steps
Code of practice for design and installation
of small sewage treatment works and
cesspools
Methods of Testing Vulcanized Rubber Part A11 : Determination of Crack Growth
(De Mattia)
Procedure for type testing of small
biological domestic wastewater treatment
plants
Sewerage -- Guide to new sewerage
construction
Sewerage -- Guide to pumping stations and
pumping mains
Sewerage -- Guide to planning and
construction of sewers in tunnel
Sewerage -- Guide to design and
construction of outfalls
Sewerage -- Guide to rehabilitation of
sewers
Photography. Processing wastes. Analysis
of cyanides -- Determination of
hexacyanoferrate(II) and
hexacyanoferrate(III) by spectrometry
Photography. Processing wastes.
Determination of nitrate by a spectrometric
method using brucine
Photography. Processing wastes.
Determination of silver content
Recommendations for treatment of water
for marine boilers
Specification for water for lead-acid
batteries
Specification for topsoil
Soil quality -- Chemical methods -Determination of dry matter and water
content on a mass basis by a gravimetric
method
Soil quality -- Sampling -- Guidance on the
collection, handling and storage of soil for
the assessment of aerobic microbial
processes in soil
BS 903 : Part A37
BS 903 : Part A40
BS 7755 : Part 3 : Section 3.10
BS 7755 : Part 3 : Section 3.11
BS 7755 : Part 3 : Section 3.12
BS 7755 : Part 3 : Section 3.2
BS 7755 : Part 3 : Section 3.3
BS 7755 : Part 3 : Section 3.4
BS 7755 : Part 3 : Section 3.5
BS 7755 : Part 3 : Section 3.6
BS 7755 : Part 3 : Section 3.7
BS 7755 : Part 3 : Section 3.8
BS 7755 : Part 3 : Section 3.9
BS 7755 : Part 4 : Section 4.1 : Subsection
4.1.1
Physical Testing of Rubber - Part A37 :
Determination of Tendency to Adhere to
and to Corrode Metals
Methods of Testing Vulcanized Rubber Part A40 : Determination of Adhesion to
Rigid Materials Using Conical Shaped
Parts
Soil quality -- Chemical methods -Determination of carbonate content.
Volumetric method
Soil quality -- Chemical methods -Determination of water-soluble and acidsoluble sulfate
Soil quality -- Chemical methods -Determination of the potential cation
exchange capacity and exchangeable
cations using barium chloride solution
buffered at pH = 8.1
Soil quality -- Chemical methods -Determination of pH
Soil quality -- Chemical methods -Determination of effective cation exchange
capacity and base saturation level using
barium chloride solution
Soil quality -- Chemical methods -Determination of the specific electrical
conductivity
Soil quality -- Chemical methods -Pretreatment of samples for physicochemical analyses
Soil quality -- Chemical methods -Determination of phosphorus.
Spectrometric determination of phosphorus
soluble in sodium hydrogen carbonate
solution
Soil quality -- Chemical methods -Determination of total nitrogen. Modified
Kjeldahl method
Soil quality -- Chemical methods -Determination of organic and total carbon
after dry combustion (elementary analysis)
Soil quality -- Chemical methods -Extraction of trace elements soluble in aqua
regia
Soil quality -- Biological methods -Biodegradability -- Guidance on laboratory
BS 7755 : Part 4 : Section 4.2 : Subsection
4.2.1
DD 220
BS 6916 : Part 9
DD 204
PD 6576
BS EN 614-1
BS EN 27243
BS EN 27726
BS EN 28996
BS 903 : Part A4
BS 2771 : Part 1
BS 4163
BS 5933
BS 5947
BS 6491 : Part 1
testing for biodegradation of organic
chemicals in soil under aerobic conditions
Soil quality -- Biological methods -Effects of polluntants on soil fauna -Determination of acute toxicity to
earthworms (Eisenia fetida) using artificial
soil substrate
Soil quality. Determination of mineral oil
content. Method by infrared spectrometry
and gas chromatographic method
Chain saws -- Specification for strength of
handles
Guide to determination of exposure limits,
recovery times and relaxation times in
work measurement
Memorandum on health and safety
standardization in support of 'New
Approach' Directives. Application in the
field of machinery
Safety of machinery. Ergonomic design
principles -- Terminology and general
principles
Hot environments. Estimation of the heat
stress on working man, based on the
WBGT-index (wet bulb globe temperature)
Thermal environments. Instruments and
methods for measuring physical quantities
Ergonomics. Determination of metabolic
heat production
Method for Physical Testing of Rubber Part A4 : Determination of Stress-strain
Properties
Electrical equipment of industrial machines
-- Specification for general requirements
Code of practice for health and safety in
workshops of schools and similar
establishments
Specification for overhead guards for highlift rider trucks
Method of test for static loading of
protective cabs and frames for agricultural
wheeled tractors, including acceptance
conditions
Electro-sensitive safety systems for
industrial machines -- Specification for
general requirements
BS 6491 : Part 2
BS 6753
BS 6916 : Part 3
BS EN 292-1
BS EN 292-2
BS EN 294
BS EN 349
BS EN 414
BS EN 418
BS EN 457
BS EN 563
BS EN 614-1
BS EN 626-1
BS 903 : Part A3
BS EN 60204-3-1
Electro-sensitive safety systems for
industrial machines -- Specification for
particular requirements for an electrosensitive safety system incorporating a
photoelectric sensing unit(s)
Specification for shotbolts (solenoid
operated) for guarding machinery
Chain saws -- Specification for dimensions
of front hand guards
Safety of machinery. Basic concepts,
general principles for design -- Basic
terminology, methodology
Safety of machinery. Basic concepts,
general principles for design -- Technical
principles and specifications
Safety of machinery. Safety distances to
prevent danger zones being reached by the
upper limbs
Safety of machinery. Minimum gaps to
avoid crushing of parts of the human body
Safety of machinery. Rules for the drafting
and presentation of safety standards
Safety of machinery. Emergency stop
equipment, functional aspects. Principles
for design
Safety of machinery. Auditory danger
signals. General requirements, design and
testing
Safety of machinery. Temperatures of
touchable surfaces. Ergonomics data to
establish temperature limit values for hot
surfaces
Safety of machinery. Ergonomic design
principles -- Terminology and general
principles
Safety of machinery. Reduction of risks to
health from hazardous substances emitted
by machinery -- Principles and
specifications for machinery manufacturers
Physical Testing of Rubber - Part A3 :
Method for Determination of Tear
Strength, (Trouser, Angle and Crescent
Test Pieces)
Safety of machinery. Electrical equipment
of machines -- Particular requirements -Sewing machines, units and systems
BS EN 61310-1
BS EN 61310-2
DD ENV 1070
BS 5330
BS 6655
BS 6951
BS ISO 389-3
BS ISO 389-4
BS EN 60645-3
BS EN 60645-4
BS 903 : Part A2
BS 903 : Part A31
BS 6055
BS 6472
BS 6611
BS 6841
Safety of machinery. Indication, marking
and actuation -- Requirements for visual,
auditory and tactile signals
Safety of machinery. Indication, marking
and actuation -- Requirements for marking
Safety of machinery. Terminology
Method of test for estimating the risk of
hearing handicap due to noise exposure
Specification for pure tone air conduction
threshold audiometry for hearing
conservation purposes
Specification for threshold of hearing by air
conduction as a function of age and sex for
otologically normal persons
Acoustics. Reference zero for the
calibration of audiometric equipment -Reference equivalent threshold force levels
for pure tones and bone vibrators
Acoustics. Reference zero for the
calibration of audiometric equipment -Reference levels for narrow-band masking
noise
Audiometers -- Auditory test signals of
short duration for audiometric and neurootological purposes
Audiometers -- Equipment for extended
high-frequency audiometry
Physical Testing of Rubber - Part A2 :
Method for Determination of Tensile
Stress-strain Properties
Methods of Testing Vulcanized Rubber Part A31 : Determination of the Lowfrequency Dynamic Properties of Rubbers
by Means of a Torsion Pendulum
Methods for measurement of whole-body
vibration of the operators of agricultrual
wheeled tractors and machinery
Guide to evaluation of human exposure to
vibration in buildings (1 Hz to 80 Hz)
Guide to evaluation of the response of
occupants of fixed structures, especially
buildings and offshore structures, to lowfrequency horizontal motion (0.063 Hz to 1
Hz)
Guide to measurement and evaluation of
human exposure to whole-body mechanical
BS 6842
BS 6916 : Part 8
BS 7085
BS 7482 : Part 1
BS 7482 : Part 2
BS EN ISO 8662-4
BS EN ISO 8662-6
BS EN 28662-1
DD ENV 25349
BS 7482 : Part 3
DD ENV 28041
BS 3044
BS 4467
DD 202
BS 903 : Part A29
vibration and repeated shock
Guide to measurement and evaluation of
human exposure to vibration transmitted to
the hand
Chain saws -- Method of measurement of
hand- transmitted vibration
Guide to safety aspects of experiments in
which people are exposed to mechanical
vibration and shock
Instrumentation for the measurement of
vibration exposure of human beings -Specification for general requirements for
instrumentation for measuring the vibration
applied to human beings
Instrumentation for the measurement of
vibration exposure of human beings -Specification for instrumentation for
measuring vibration transmitted to the hand
Hand-held portable power tools.
Measurement of vibrations at the handle -Grinding machines
Hand-held portable power tools.
Measurement of vibrations at the handle -Impact drills
Hand-held portable power tools.
Measurement of vibrations at the handle -General
Mechanical vibration. Guidelines for the
measurement and the assessment of human
exposure to hand-transmitted vibration
Instrumentation for the measurement of
vibration exposure of human beings -Specification for instrumentation for
measuring vibration exposure to the whole
body
Human response to vibration. Measuring
instrumentation
Guide to ergonomics principles in the
design and selection of office furniture
Guide to dimensions in designing for
elderly people
Ergonomic principles in the design of work
systems
Physical Testing of Rubber - Part A29 :
Determination of Low-temperature
Characteristics - Temperature-retraction
BS 903 : Part A27
BS 903 : Part A51
DD 204
BS ISO 10551
BS EN 614-1
BS EN 29241-1
BS EN 29241-2
BS EN 29241-3
BS EN 60447
BS 4422 : Part 6
BS 5378 : Part 2
PD 6504
BS 6656
BS 6713 : Part 1
BS 6713 : Part 2
BS 6713 : Part 3
Procedure (TR Test)
Methods of Testing Vulcanized Rubber Part A27 : Determination of Rubber to
Fabric Adhesion: Direct Tension Method
Methods of Testing Vulcanized Rubber Part A51 : Determination of Resistance to
Tension Fatigue
Guide to determination of exposure limits,
recovery times and relaxation times in
work measurement
Ergonomics of the thermal environment.
Assessment of the influence of the thermal
environment using subjective judgement
scales
Safety of machinery. Ergonomic design
principles -- Terminology and general
principles
Ergonomic requirements for office work
with visual display terminals (VDTs) -General introduction
Ergonomic requirements for office work
with visual display terminals (VDTs) -Guidance on task requirements
Ergonomic requirements for office work
with visual display terminals (VDTs) -Visual display requirements
Man-machine interface (MMI). Actuating
principles
Glossary of terms associated with fire -Evacuation and means of escape
Safety signs and colours -- Specification
for colorimetric and photometric properties
of materials
Medical information on human reaction to
skin contact with hot surfaces
Guide to prevention of inadvertent ignition
of flammable atmospheres by radiofrequency radiation
Explosion protection systems -- Method for
determination of explosion indices of
combustible dusts in air
Method for determination of explosion
indices of combustible gases in air
Explosion protection systems -- Method for
determination of explosion indices of
fuel/air mixtures other than dust/air and
BS 6713 : Part 4
BS 7348
BS 903 : Part A52
BS 6959
BS 4444
BS 5373
BS 5958 : Part 1
BS 5958 : Part 2
BS 6907 : Part 2
BS 6907 : Part 3
BS 6907 : Part 5
BS 7430
BS 7520
BS 7739 : Part 1
PD 6519 : Part 1
PD 6519 : Part 2
gas/air mixtures
Explosion protection systems -- Method for
determination of efficacy of explosion
suppression systems
Specification for electrical apparatus for
the detection of combustible gases in
domestic premises
Methods of Testing Vulcanized Rubber Part A52 : Determination of Ageing
Characteristics by Measurement of Stress
at a Given Elongation
Code of practice for selection, installation,
use and maintenance of apparatus for the
detection and measurement of combustible
gases (other than for mining applications or
explosives processing and manufacture)
Guide to electrical earth monitoring and
protective conductor proving
Specification for electrical safety
requirements for room aerials
Code of practice for control of undesirable
static electricity -- General considerations
Code of practice for control of undesirable
static electricity -- Recommendations for
particular industrial situations
Electrical installations for open-cast mines
and quarries -- General recommendations
for protection against direct contact and
electric shock
Electrical installations for open-cast mines
and quarries -- Recommendations for
equipment and ancillaries
Electrical installations for open-cast mines
and quarries -- Recommendations for
operation
Code of practice for earthing
Guide to quality assurance plans for tools
for live working
Voltage detectors -- Specification for
capacitive type to be used for voltage
exceeding 1 kV a.c.
Guide to effects of current on human
beings and livestock -- General aspects
Guide to effects of current on human
beings and livestock -- Special aspects
relating to human beings
PD 6535
DD ENV 50196
BS EN 60984
BS EN 61219
BS 2606
BS 3385
BS 3664
BS 3783
BS 3890
BS 3895
BS 3909
BS 4031
BS 4094 : Part 1
BS 4094 : Part 2
BS 4247 : Part 2
BS 5724 : Part 2 : Section 2.1
BS 5724 : Part 2 : Section 2.1 : Supplement
No. 1
Guide to common aspects of installation
and equipment for protection against
electric shock
Live working. Required insulation level
and related air distances. Calculation
method
Specification for sleeves of insulating
material for live working
Live working. Earthing or earthing and
short-circuiting equipment using lances as
a short-circuiting device. Lance earthing
Specification for X-ray protective gloves
for medical diagnostic purposes up to 150
kV peak
Specification for direct reading pocket type
electroscope exposure meters
Specification for film badges for personnel
radiation monitoring
Specification for X-ray lead-rubber
protective aprons for personal use
General recommendations for the testing,
calibration and processing of radiation
monitoring films
Guide to the design, testing and use of
packaging for the safe transport of
radioactive materials
Methods for the sampling and analysis of
lead and lead alloys -- Specification for
ingot lead for radiation shielding
Specification for X-ray protective lead
glasses
Recommendation for data on shielding
from ionizing radiation -- Shielding from
gamma radiation
Recommendation for data on shielding
from ionizing radiation -- Shielding from
X-radiation
Surface materials for use in radioactive
areas -- Guide to the selection of materials
Medical electrical equipment -- Particular
requirements for safety -- Specification for
medical electron accelerators in the range 1
MeV to 50 MeV
Medical electrical equipment -- Particular
requirements for safety -- Revised and
additional text
BS 5724 : Part 2 : Section 2.6
BS 5724 : Part 2 : Section 2.7
BS 5724 : Part 2 : Section 2.8
BS 5724 : Part 2 : Section 2.11
BS 5724 : Part 2 : Section 2.11 :
Supplement No. 1
BS 5724 : Part 2 : Section 2.11 :
Supplement No. 2
BS 5724 : Part 2 : Section 2.15
BS 5724 : Part 3 : Section 3.1
BS 6090
BS 7518
BS 7817 : Part 1
BS 7817 : Part 2
BS EN 421
BS 697
Medical electrical equipment -- Particular
requirements for safety -- Specification for
microwave therapy equipment
Medical electrical equipment -- Particular
requirements for safety -- Specification for
high-voltage generators of diagnostic X-ray
generators
Medical electrical equipment -- Particular
requirements for safety -- Specification for
therapeutic X-ray generators
Medical electrical equipment -- Particular
requirements for safety -- Specification for
gamma beam therapy equipment
Medical electrical equipment -- Particular
requirements for safety -- Specification for
gamma beam therapy equipment. Revised
and additional text
Medical electrical equipment -- Particular
requirements for safety -- Methods of test
for radiation safety
Medical electrical equipment -- Particular
requirements for safety -- Specification for
capacitor discharge X-ray generators
Medical electrical equipment -- Particular
requirements for performance -- Methods
of declaring functional performance
characteristics of medical electron
accelerators in the range 1 MeV to 50 MeV
Specification for personal photographic
dosemeters
Radiation protection instrumentation.
Portable, transportable or installed
equipment to measure x or gamma
radiation for environmental monitoring.
Integrating assemblies
Protective devices against diagnostic
medical X-radiation -- Method for
determination of attenuation properties of
sheet materials
Protective devices against diagnostic
medical X-radiation -- Specification for
protective glass plates
Protective gloves against ionizing radiation
and radioactive contamination
Specification for rubber gloves for
electrical purposes
BS 2606
BS 2723
BS 3314
BS 3783
BS EN 60601-1-3
BS 4110
BS 4171
BS 4676
BS 5145
BS 5426
BS 6159 : Part 1
BS 6249 : Part 1
BS 6408
BS 7182
BS 7184
BS 903 : Part A32
BS 7193
BS ISO 9920
Specification for X-ray protective gloves
for medical diagnostic purposes up to 150
kV peak
Specification for firemen's leather boots
Specification for protective aprons for wet
work
Specification for X-ray lead-rubber
protective aprons for personal use
Medical electrical equipment -- General
requirements for safety -- Collateral
standard. General requirements for
radiation protection in diagnostic X-ray
equipment
Specification for eye-protectors for vehicle
users
Specification for donkey jackets
Specification for gaiters and footwear for
protection against burns and impact risks in
foundries
Specification for lined industrial vulcanized
rubber boots
Specification for workwear and career wear
Polyvinyl chloride boots -- Specification
for general and industrial lined or unlined
boots
Materials and material assemblies used in
clothing for protection against heat and
flame -- Specification for flammability
testing and performance
Specification for clothing made from
coated fabrics for protection against wet
weather
Specification for air-impermeable chemical
protective clothing
Recommendations for selection, use and
maintenance of chemical protective
clothing
Methods of Testing Vulcanized Rubber Part A32 : General Directions for
Achieving Elevated or Subnormal
Temperatures for Test Purposes
Specification for lined lightweight rubber
overshoes and overboots
Ergonomics of the thermal environment.
Estimation of the thermal insulation and
evaporative resistance of a clothing
BS EN 340
BS EN 344
BS EN 345
BS EN 348
BS EN 366
BS EN 367
BS EN 368
BS EN 369
BS EN 373
BS EN 374-1
BS EN 374-2
BS EN 374-3
BS EN 381-1
BS EN 381-2
BS EN 381-5
BS EN 388
BS EN 397
ensemble
Protective clothing. General requirements
Requirements and test methods for safety,
protective and occupational footwear for
professional use
Specification for safety footwear for
professional use
Protective clothing. Determination of
behaviour of materials on impact of small
splashes of molten metal
Protective clothing. Protection against heat
and fire. Method of test : evaluation of
materials and material assemblies when
exposed to a source of radiant heat
Protective clothing. Protection against heat
and fire. Method for determining heat
transmission on exposure to flame
Protective clothing. Protection against
liquid chemicals. Test method: resistance
of materials to penetration by liquids
Protective clothing. Protection against
liquid chemicals. Test method. Resistance
of materials to permeation by liquids
Protective clothing. Assessment of
resistance of materials to molten metal
splash
Protective gloves against chemicals and
micro-organisms -- Terminology and
performance requirements
Protective gloves against chemicals and
micro-organisms -- Determination of
resistance to penetration
Protective gloves against chemicals and
micro-organisms -- Determination of
resistance to permeation by chemicals
Protective clothing for users of hand-held
chainsaws -- Test rig for testing resistance
to cutting by a chainsaw
Protective clothing for users of hand-held
chainsaws -- Test methods for leg
protectors
Protective clothing for users of hand-held
chainsaws -- Requirements for leg
protectors
Protective gloves against mechanical risks
Specification for industrial safety helmets
BS EN 407
BS EN 412
BS EN 420
BS EN 421
BS EN 463
BS EN 464
BS EN 465
BS EN 466
BS EN 467
BS EN 468
BS EN 470-1
BS EN 471
BS EN 510
BS EN 511
BS EN 530
Protective gloves against thermal risks
(heat and/or fire)
Specification for protective aprons for use
with hand knives
General requirements for gloves
Protective gloves against ionizing radiation
and radioactive contamination
Protective clothing. Protection against
liquid chemicals. Test method.
Determination of resistance to penetration
by a jet of liquid (jet test)
Protective clothing. Protection against
liquid and gaseous chemicals, including
liquid aerosols and solid particles. Test
method. Determination of leak-tightness of
gas-tight suits (Internal Pressure Test)
Protective clothing. Protection against
liquid chemicals. Performance
requirements for chemical protective
clothing with spray-tight connections
between different parts of the clothing
(type 4 equipment)
Protective clothing. Protection against
liquid chemicals. Performance
requirements for chemical protective
clothing with liquid-tight connections
between different parts of the clothing
(type 3 equipment)
Protective clothing. Protection against
liquid chemicals. Performance
requirements for garments providing
protection to parts of the body
Protective clothing for use against liquid
chemicals. Test method. Determination of
resistance to penetration by spray (Spray
Test)
Protective clothing for use in welding and
allied processes -- General requirements
Specification for high-visibility warning
clothing
Specification for protective clothing for use
where there is a risk of entanglement with
moving parts
Specification for protective gloves against
cold
Abrasion resistance of protective clothing
BS EN 531
BS EN 532
BS EN 60903
BS 1542
BS 2724
BS EN 702
BS 3864
BS 4033
BS 4224
BS 4423
BS 6526
BS 6658
BS 6858
BS 6863
BS 7739 : Part 1
BS 8093
BS EN 146
BS EN 167
BS EN 168
material. Test methods
Protective clothing for industrial workers
exposed to heat (excluding firefighters' and
welders' clothing)
Protective clothing. Protection against heat
and flame. Test method for limited flame
spread
Specification for gloves and mitts of
insulating material for live working
Specification for equipment for eye, face
and neck protection against non-ionizing
radiation arising during welding and
similar operations
Specification for sun glare eye protectors
for general use
Protective clothing. Protection against heat
and flame. Test method. Determination of
the contact heat transmission through
protective clothing or its materials
Specification for protective helmets for
firefighters
Specification for industrial scalp protectors
(light duty)
Specification for yachtsmen's safety
harnesses and safety lines
Specification for climbers' helmets
Specification for domestic oven gloves
Specification for protective helmets for
vehicle users
Specification for manually operated
positioning devices and associated
anchorage lines for use with industrial
safety belts and harnesses
Specification for pedal cyclists' helmets
Voltage detectors -- Specification for
capacitive type to be used for voltage
exceeding 1 kV a.c.
Code of practice for the use of safety nets,
containment nets and sheets on
constructional works
Respiratory protective devices specification
for powered particle filtering devices
incorporating helmets or hoods
Personal eye protection. Optical test
methods
Personal eye protection. Non-optical test
BS EN 169
BS EN 170
BS EN 171
BS EN 172
BS 903 : Part A53
BS EN 208
BS EN 352-1
BS EN 352-2
BS EN 379
BS EN 394
BS EN 395
BS EN 396
BS EN 399
BS EN 403
BS EN 458
BS EN 960
BS EN 24869-1
BS EN 24869-3
methods
Specification for filters for personal eyeprotection equipment used in welding and
similar operations
Specification for ultraviolet filters used in
personal eye-protection equipment
Specification for infra-red filters used in
personal eye-protection equipment
Specification for sunglare filters used in
personal eye-protectors for industrial use
Methods of Testing Vulcanized Rubber Part A53 : Methods for Exposure to
Natural Weathering, For Use in
Determining Resistance to Weathering
Specification for personal eye-protectors
used for adjustment work on lasers and
laser systems
Hearing protectors. Safety requirements
and testing -- Ear muffs
Hearing protectors. Safety requirements
and testing -- Ear plugs
Specification for filters with switchable or
dual luminous transmittance for personal
eye-protectors used in welding and similar
operations
Lifejackets and personal bouyancy aids.
Additional items
Lifejackets and personal buoyancy aids.
Lifejacket 100
Lifejackets and personal buoyancy aids.
Lifejacket 150
Lifejackets and personal buoyancy aids.
Lifejacket 275
Specification for filtering respiratory
protective devices with hood for self-rescue
from fire
Hearing protectors. Recommendations for
selection, use, care and maintenance.
Guidance document
Headforms for use in the testing of
protective helmets
Acoustics. Hearing protectors -- Sound
attenuation of hearing protectors.
Subjective method of measurement
Acoustics. Hearing protectors -- Simplified
method for the measurement of insertion
BS 4275
BS 4400
BS 4667 : Part 4
BS 7156: Part 1
BS 7156: Part 2
BS 7170
BS 7309
BS 7355
BS 7356
BS EN 134
BS EN 136-10
BS EN 137
BS EN 138
BS EN 139
BS EN 141
BS EN 143
loss of ear-muff type protectors for quality
inspection purposes
Recommendations for the selection, use
and maintenance of respiratory protective
equipment
Method for sodium chloride particulate test
for respirator filters
Breathing apparatus -- Specification for
open-circuit escape breathing apparatus
Respiratory protective devices: threads for
facepieces -- Specification for standard
thread connection
Respiratory protective devices: threads for
facepieces -- Specification for centre thread
connection
Specification for respiratory protective
devices: self-contained closed-circuit
compressed oxygen breathing apparatus
Specification for mouthpiece assemblies
for respiratory protective devices
Specification for full face masks for
respiratory protective devices
Specification for half masks and quarter
masks for respiratory protective devices
Respiratory protective devices.
Nomenclature of components
Parts for full face masks for respiratory
protective devices -- Specification for full
face masks for special use
Specification for respiratory protective
devices: self-contained open-circuit
compressed air breathing apparatus
Respiratory protective devices.
Specification for fresh air hose breathing
apparatus for use with full face mask, half
mask or mouthpiece assembly
Respiratory protective devices.
Compressed air line breathing apparatus for
use with a full face mask, half mask or a
mouthpiece assembly. Requirements,
testing, marking
Specification for gas filters and combined
filters used in respiratory protective
equipment
Specification for particle filters used in
respiratory protective equipment
BS EN 144-1
BS EN 145-2
BS EN 149
BS EN 250
BS EN 269
BS EN 270
BS EN 147
BS 903 : Part A54
BS EN 271
BS EN 372
BS EN 400
BS EN 401
Respiratory protective devices. Gas
cylinder valves -- Specification for thread
connection for insert connector
Respiratory protective devices. Selfcontained closed-circuit compressed
oxygen breathing apparatus -- Specification
for apparatus for special use
Specification for filtering half masks to
protect against particles
Respiratory equipment. Open-circuit selfcontained compressed air diving apparatus.
Requirements, testing, marking
Respiratory protective devices.
Specification for powered fresh air hose
breathing apparatus incorporating a hood
Respiratory protective devices.
Compressed air line breathing apparatus
incorporating a hood. Requirements,
testing, marking
Respiratory protective devices.
Specification for power assisted particle
filtering devices incorporating full face
masks, half masks or quarter masks
Methods of Testing Vulcanized Rubber Part A54 : Methods for Exposure to
Artificial Light, For Use in Determining
Resistance to Weathering
Respiratory protective devices.
Compressed air line or powered fresh air
hose breathing apparatus incorporating a
hood for use in abrasive blasting
operations. Requirements, testing, marking
Specification for SX gas filters and
combined filters against specific named
compounds used in respiratory protective
equipment
Respiratory protective devices for selfrescue. Self-contained closed-circuit
breathing apparatus. Compressed oxygen
escape apparatus. Requirements, testing,
marking
Respiratory protective devices for selfrescue. Self-contained closed-circuit
breathing apparatus. Chemical oxygen
(KO2) escape apparatus. Requirements,
testing, marking
BS EN 402
BS EN 404
BS EN 405
BS EN 353-1
BS EN 353-2
BS EN 354
BS EN 355
BS EN 358
BS EN 360
BS EN 361
BS EN 362
BS EN 363
BS EN 364
BS EN 365
BS 3775
BS 4489
BS 5210
Specification for respiratory protective
devices for escape. Self-contained opencircuit compressed air breathing apparatus
with full face mask or mouthpiece
assembly.
Specification for respiratory protective
devices for self-rescue: filter self-rescuer
Respiratory protective devices. Valved
filtering half masks to protect against gases
or gases and particles
Personal protective equipment against falls
from a height: guided type fall arresters -Specification for guided type fall arresters
on a rigid anchorage line
Personal protective equipment against falls
from a height : guided type fall arresters -Specification for guided type fall arresters
on a flexible anchorage line
Personal protective equipment against falls
from a height. Lanyards
Personal protective equipment against falls
from a height. Energy absorbers
Personal equipment for work positioning
and prevention of falls from a height. Work
positioning systems
Personal protective equipment against falls
from a height. Retractable type fall
arresters
Personal protective equipment against falls
from a height. Full body harnesses
Personal protective equipment against falls
from a height. Connectors
Personal protective equipment against falls
from a height. Fall arrest systems
Personal protective equipment against falls
from a height. Test methods
Personal protective equipment against falls
from a height. General requirements for
instructions for use and for marking
Specification for counting trays (planchets)
for radioactive assay
Method for measurement of UV-A
radiation (black light) used in nondestructive testing
Specification for standard dimensions of
scintillators
BS 5251
BS 5241 : Part 1
BS 5241 : Part 2
BS 5242 : Part 1
BS 5242 : Part 2
BS 5247 : Part 14
BS 5248
BS 5252
BS 5566
BS 5868
BS 5869
BS 6090
BS 6689
BS 6809
BS 6932
Specification for analogue voltage ranges
and logic levels for mains operated nuclear
instruments
Rigid polyurethane (PUR) and
polyisocyanurate (PIR) foam when
dispensed or sprayed on a construction site
-- Specification for sprayed foam thermal
insulation applied externally
Rigid polyurethane (PUR) and
polyisocyanurate (PIR) foam when
dispensed or sprayed on a construction site
-- Specification for dispensed foam for
thermal insulation or buoyancy
applications
Tubes for fluid power cylinder barrels -Specification for steel tubes with specially
finished surfaces
Tubes for fluid power cylinder barrels -Specification for non-ferrous metallic tubes
with specially finished bores
Code of practice for sheet roof and wall
coverings -- Corrugated asbestos-cement
Specification for aspirated hygrometer
Framework for colour co-ordination for
building purposes
Recommendations for installed exposure
rate meters, warning assemblies and
monitors for X or gamma radiation of
energy between 80 keV and 3 MeV
Guide to ionizing radiation thickness
meters for materials in the form of sheets,
coatings or laminates
Specification for X and ç reference
radiations for calibrating dosemeters and
dose ratemeters and for determining their
response as a function of photon energy
Specification for personal photographic
dosemeters
Specification for reference beta radiations
for calibrating dosemeters and
doseratemeters and for determining their
response as a function of beta radiation
energy
Method for calibration of radiometers for
use in fire testing
Method for measurement of the effective
BS 7515
BS 1123 : Part 1
BS 2915
BS 3127
BS 6283 : Part 2
BS 6759 : Part 3
BS 5915
BS 4737 : Part 5 : Section 5.2
BS 4737 : Part 1
BS 6283 : Part 3
BS 903 : Part A55
PD 6503 : Part 2
BS 4737 : Part 2
BS 4737 : Part 3 : Section 3.0
focal spot size of mini-focus and microfocus X-ray tubes used for industrial
radiography
Radiation protection instrumentation.
Portable potential alpha energy meter for
rapid measurements in mines
Safety valves, gauges and fusible plugs for
compressed air or inert gas installations -Code of practice for installation
Specification for bursting discs and
bursting disc devices
Specification for ferrous and non-ferrous
Bourdon tubing
Safety and control devices for use in hot
water systems -- Specifications for
temperature relief valves for pressures from
1 bar to 10 bar
Safety valves -- Specification for safety
valves for process fluids
Specification for equipment for minehead
assay and sorting radioactive ores in
containers
Intruder alarm systems -- Terms and
symbols -- Recommendations for symbols
for diagrams
Intruder alarm systems -- Specification for
installed systems with local audible and/or
remote signalling
Safety and control devices for use in hot
water systems -- Specification for
combined temperature and pressure relief
valves for pressures from 1 bar to 10 bar
Methods of Testing Vulcanized Rubber Part A55 : Methods for Assessment of
Changes in Properties After Exposure to
Natural Weathering or Artificial Light, For
Use in Determining Resistance to
Weathering
Toxicity of combustion products -- Guide
to the relevance of small-scale tests for
measuring the toxicity of combustion
products of materials and composites
Intruder alarm systems -- Specification for
installed systems for deliberate operation
Intruder alarm systems -- Specifications for
components -- General requirements
BS 4737 : Part 3 : Section 3.1
BS 4737 : Part 3 : Section 3.10
BS 4737 : Part 3 : Section 3.11
BS 4737 : Part 3 : Section 3.13
BS 4737 : Part 3 : Section 3.12
BS 4737 : Part 3 : Section 3.14
BS 4737 : Part 3 : Section 3.2
BS 4737 : Part 3 : Section 3.3
BS 4737 : Part 3 : Section 3.30
BS 4737 : Part 3 : Section 3.4
BS 4737 : Part 3 : Section 3.5
BS 4737 : Part 3 : Section 3.6
BS 4737 : Part 3 : Section 3.7
BS 4737 : Part 3 : Section 3.8
BS 4737 : Part 3 : Section 3.9
BS 4737 : Part 4 : Section 4.1
BS 4737 : Part 4 : Section 4.2
BS 4737 : Part 4 : Section 4.3
BS 5051:Part 1
BS 5357
Intruder alarm systems -- Specifications for
components -- Continuous wiring
Intruder alarm systems -- Specifications for
components -- Vibration detectors
Intruder alarm systems -- Specifications for
components -- Rigid printed-circuit wiring
Intruder alarm systems -- Specifications for
components -- Capacitive proximity
detectors
Intruder alarm systems -- Specifications for
components -- Beam interruption detectors
Intruder alarm systems -- Specifications for
components -- Specification for
deliberately-operated devices
Intruder alarm systems -- Specifications for
components -- Foil on glass
Intruder alarm systems -- Specifications for
components -- Protective switches
Intruder alarm systems -- Specifications for
components -- Specification for PVC
insulated cables for interconnecting wiring
Intruder alarm systems -- Specifications for
components -- Radiowave Doppler
detectors
Intruder alarm systems -- Specifications for
components -- Ultrasonic movement
detectors
Intruder alarm systems -- Specifications for
components -- Acoustic detectors
Intruder alarm systems -- Specifications for
components -- Passive infra-red detectors
Intruder alarm systems -- Specifications for
components -- Volumetric capacitive
detectors
Intruder alarm systems -- Specifications for
components -- Pressure mats
Intruder alarm systems -- Codes of practice
-- Code of practice for planning and
installation
Code of practice for maintenance and
records
Code of practice for exterior alarm systems
Bullet-resistant glazing -- Specification for
glazing for interior use
Code of practice for installation of security
glazing
BS 5544
BS 6707
BS 6799
BS 6800
BS 6803 : Part 1
BS 6803 : Part 3
BS 7042
BS 7150
BS 7230
BS 7480
BS 7499 : Part 1
BS 7582
BS 7807
BS 8220 : Part 1
BS AU 209 : Part 0
BS AU 209 : Part 1a
BS AU 209 : Part 2
BS 903 : Part 0
BS 903 : Part A58
BS AU 209 : Part 3
Specification for anti-bandit glazing
(glazing resistant to manual attack)
Specification for intruder alarm systems for
consumer installation
Code of practice for wire-free intruder
alarm systems
Specification for home and personal
security devices
Vehicle security alarm systems -Specification for installed systems
Vehicle security alarm systems -- Code of
practice for the protection of vehicles and
goods in transit
Specification for high security intruder
alarm systems in buildings
Code of practice for intruder alarm systems
with mains wiring communication
Code of practice for article theft detection
systems
Specification for security seals
Manned security services -- Code of
practice for static guarding and mobile
patrol services
Code of practice for reconditioning of used
safes
Code of practice for design, installation and
servicing of integrated systems
incorporating fire detection and alarm
systems and/or other security systems for
buildings other than dwellings
Guide for Security of buildings against
crime -- Dwellings
Vehicle security -- Guide to the application
of security devices/systems to vehicles
Vehicle security -- Specification for
locking systems for passenger cars and car
derived vehicles
Vehicle security -- Specification for
security systems against theft of in-car
equipment for entertainment
Physical Testing of Rubber - Part 0 :
Introduction
Physical Testing of Rubber - Part A58 :
Methods Using the Viscometer
Vehicle security -- Specification for
security marking of glazing for passenger
BS AU 209 : Part 4
BS AU 209 : Part 5
BS AU 209 : Part 6a
BS AU 209 : Part 7
BS 2740
BS 5502 : Part 52
BS 5839 : Part 1
BS 5839 : Part 2
BS 5839 : Part 3
BS 5839 : Part 4
BS 5839 : Part 5
BS 5839 : Part 6
BS 5979
BS 6804
BS 7369
BS 7443
cars and car derived vehicles
Vehicle security -- Specification for
security glazing for passenger cars and car
derived vehicles
Vehicle security -- Specification for central
power locking systems for passenger cars
and car derived vehicles
Vehicle security -- Specification for
locking systems for passenger cars and car
derived vehicles
Vehicle security -- Specification for
locking systems for good vehicle driver's
compartments
Specification for simple smoke alarms and
alarm metering devices
Buildings and structures for agriculture -Code of practice for design of alarm
systems and emergency ventilation for
livestock housing
Fire detection and alarm systems for
buildings -- Code of practice for system
design, installation and servicing
Fire detection and alarm systems for
buildings -- Specification for manual call
points
Fire detection and alarm systems for
buildings -- Specification for automatic
release mechanisms for certain fire
protection equipment
Fire detection and alarm systems for
buildings -- Specification for control and
indicating equipment
Fire detection and alarm systems for
buildings -- Specification for optical beam
smoke detectors
Fire detection and alarm systems for
buildings -- Code of practice for the design
and installation of fire detection and alarm
systems in dwellings
Code of practice for remote centres for
alarm systems
Code of practice for social alarm systems
Specification for multi-frequency tone
signalling protocol for social alarm systems
Specification for sound systems for
emergency purposes
BS 7524
BS 7606
BS EN 50057
BS EN 50058
BS 1812
BS 3406 : Part 2
BS 3406 : Part 3
BS 3406 : Part 4
BS 3406 : Part 5
BS 3406 : Part 6
BS 3625
BS 5851
BS 6219
BS 903 : Part A25
BS 6620 : Part 1
BS 6620 : Part 2
Code of practice for documentation for
social alarm systems
Specification for social alarm system
apparatus for connection to public switched
telephone networks
Electrical apparatus for the detection and
measurement of combustible gases.
Performance requirements for Group II
apparatus indicating up to 100 % lower
explosive limit
Specification for electrical apparatus for
the detection and measurement of
combustible gases. Performance
requirements for Group II apparatus
indicating up to 100 % (V/V) gas
Specification for textile screening cloths
Methods for determination of particle size
distribution -- Recommendations for
gravitational liquid sedimentation methods
for powders and suspensions
Methods for determination of particle size
distribution -- Air elutriation methods
Methods for determination of particle size
distribution -- Guide to microscope and
image analysis methods
Methods for determination of particle size
distribution -- Recommendations for
electrical sensing zone method (the Coulter
principle)
Methods for determination of particle size
distribution -- Recommendations for
centrifugal liquid sedimentation methods
for powders and suspensions
Specification for eyepiece and screen
graticules for the determination of the
particle size of powders
Specification for grain sizes of diamond or
cubic boron nitride
Test sieves for cereals
Physical Testing of Rubber - Part A25 :
Determination of Low-temperature
Brittleness
Industrial plate screens -- Guide for screens
of thickness 3 mm and above
Industrial plate screens -- Guide for screens
of thickness below 3 mm
BS 7372: Part 1
BS 7372: Part 2
BS 7372: Part 3
BS 7410
BS 7425 : Part 4
BS 7694
BS 7792
BS 7501
BS 7502
PD 6433
BS ISO 5725-6
BS 2011 : Part 2.1Ca
BS 903 : Part A5
BS 2011 : Part 2.1Fd
BS 2011 : Part 2.1Fda
BS 2011 : Part 2.1Fdb
BS 2011 : Part 2.1J
Guide to the choice of aperture size and
wire diameter combinations for industrial
wire screens and woven wire cloth -General
Guide to the choice of aperture size and
wire diameter combinations for industrial
wire screens and woven wire cloth -Preferred combinations for woven wire
cloth
Guide to the choice of aperture size and
wire diameter combinations for industrial
wire screens and woven wire cloth -Preferred combinations for pre-crimped or
pressure-welded wire screens
Glossary of terms used in industrial
screening
Abrasive grains -- Specification for testsieving machines
Glossary of terms for test sieves and test
sieving
Specification for industrial plate screens
General criteria for the operation of testing
laboratories
General criteria for the assessment of
testing laboratories
Guide to the application of stress analysis
to design
Accuracy (trueness and precision) of
measurement methods and results -- Use in
practice of accuracy values
Environmental testing -- Tests -- Test Ca.
Damp heat, steady state
Physical Testing of Rubber - Part A5 :
Determination of Tension Set at Normal
and High Temperatures
Environmental testing -- Tests -- Test Fd.
Random vibration - wide band, general
requirements
Environmental testing -- Tests -- Test Fda.
Random vibration - wide band
reproducibility high
Environmental testing -- Tests -- Test Fdb.
Random vibration - wide band
reproducibility medium
Environmental testing -- Tests -- Test J and
guidance. Mould growth
BS 2011 : Part 2.1Ka
BS 2011 : Part 2.1Kc
BS 2011 : Part 2.1Kd
BS 2011 : Part 2.1M
BS 2011 : Part 2.1N
BS 2011 : Part 2.1R
BS 2011 : Part 2.1Sa
BS 2011 : Part 2.1T
BS 903 : Part A62
BS 2011 : Part 2.1Ta
BS 2011 : Part 2.1U :
BS 2011 : Part 2.1Z/AD
BS 2011 : Part 2.1Z/AM
BS 903 : Part A61
BS 903 : Part A63
BS 903 : Part A30
BS 2011 : Part 2.1Z/AMD
Environmental testing -- Tests -- Test Ka.
Salt mist
Environmental testing -- Tests -- Test Kc
and guidance. Sulphur dioxide test for
contacts and connections
Environmental testing -- Tests -- Test Kd.
Hydrogen sniphide test for contacts and
connections
Environmental testing -- Tests -- Test M.
Low air pressure
Environmental testing -- Tests -- Test N.
Change of temperature
Environmental testing -- Tests -- Test R
and guidance. Water
Environmental testing -- Tests -- Test Sa.
Simulated solar radiation at ground level
Environmental testing -- Tests -- Test T.
Soldering
Physical Testing of Rubber - Part A62 :
Method for Determination of Green
Strength of Raw Rubber of Unvulcanized
Compounds
Environmental testing -- Tests -- Test Ta.
Soldering. Solderability testing by the
wetting balance method
Environmental testing -- Tests -- Test U.
Robustness of terminations and integral
mounting devices
Environmental testing -- Tests -- Tests
Z/AD. Composite temperature/humidity
cyclic test
Environmental testing -- Tests -- Test
Z/AM. Combined cold/low air pressure
tests
Physical Testing of Rubber - Part A61 :
Determination of the Frictional Properties
of Rubber
Physical Testing of Rubber - Part A63 :
Method for Determination of
Crystallization Effects by Hardness
Measurements
Physical Testing of Rubber - Part A30 :
Determination of Permeability to Gases
Environmental testing -- Tests -- Test
Z/AMD. Combined sequential cold, low air
pressure and damp heat test
BS 2011 : Part 2.1Z/BFc
BS 2011 : Part 2.1Z/BM
BS 2011 : Part 2.2C & D
BS 2011 : Part 2.2Kd
BS 2011 : Part 2.2N
BS 2011 : Part 2.2Z/AFc & Z/BFc
BS 2011 : Part 3A & B
BS 2011 : Part 3A & B Supplement No. 1
BS 2011 : Part 4 : Section 4.2
BS 903 : Part 1
BS 903 : Part A60 : Section 60.2
BS 2011 : Part 5 : Section 5.1
BS 2011 : Part 5 : Section 5.2
BS 7479
BS 7527 : Part 2 : Section 2.2
BS 7527 : Part 2 : Section 2.3
Environmental testing -- Tests -- Tests
Z/BFc. Combined dry heat/vibration
(sinusoidal) tests for both heat-dissipating
and non-heat-dissipating specimens
Environmental testing -- Tests -- Test
Z/BM. Combined dry heat/low air pressure
tests
Environmental testing -- Guidance -- Tests
C & D. Guidance for damp heat tests
Environmental testing -- Guidance -- Test
Kd. Guidance on Test Kd : Hydrogen
sulphide test for contacts and connections
Environmental testing -- Guidance -- Test
N. Guidance on change of temperature tests
Environmental testing -- Guidance -- Tests
Z/AFc & Z/BFc. Guidance on combined
temperature (cold and dry heat) and
vibration (sinusoidal) tests
Environmental testing -- Background
information -- Tests A (cold) and tests B
(dry heat)
Environmental testing -- Background
information -- Tests A (cold) and tests B
(dry heat)
Environmental testing -- Miscellaneous -Guidance on the application of the tests of
BS 2011 to simulate the effects of storage
Physical Testing of Rubber - Part 1 : Guide
to the Selection and Use of Methods of
Test for Rubber
Physical Testing of Rubber - Part A60 :
Curemetering - Section 60.2 Method for
the Determination of Vulcanization
Characteristics Using an Oscillating Disc
Curemeter
Environmental testing -- Guide to drafting
of test methods -- General principles
Environmental testing -- Guide to drafting
of test methods -- Terms and definitions
Method for salt spray corrosion tests in
artificial atmospheres
Classification of environmental conditions
-- Environmental conditions appearing in
nature -- Precipitation and wind
Classification of environmental conditions
-- Environmental conditions appearing in
BS 903 : Part A21 : Section 21.1
BS 7527 : Part 2 : Section 2.4
BS 7527 : Part 2 : Section 2.5
BS 7527 : Part 2 : Section 2.6
BS 7527 : Part 2 : Section 2.7
DD 175
BS EN 60068-2-63
BS EN 60068-1
BS EN 60068-2-2
BS EN 60068-2-44
BS 903 : Part A21 : Section 21.2
BS 903 : Part A3 : Section 3.2
BS 903 : Part A59 : Section 59.2
BS 903 : Part A60 : Section 60.1
BS EN 60068-2-57
BS EN 60068-2-6
BS EN 60068-2-61
nature -- Air pressure
Physical Testing of Rubber - Part A21 :
Determination of Rubber to Metal Bond
Strength - Section 21.1 : Adhesion to Rigid
Substrates - 90" Peel Method
Classification of environmental conditions
-- Environmental conditions appearing in
nature -- Solar radiation and temperature
Classification of environmental conditions
-- Environmental conditions appearing in
nature -- Dust, sand, salt mist
Classification of environmental conditions
-- Environmental conditions appearing in
nature -- Earthquake vibration and shock
Classification of environmental conditions
-- Environmental conditions appearing in
nature -- Fauna and flora
Code of practice for the identification of
potentially contaminated land and its
investigation
Environmental testing -- Test methods -Test Eq : Impact, spring hammer
Environmental testing -- General and
guidance
Environmental testing -- Test methods -Tests B. Dry heat
Environmental testing -- Test methods -Tests. Guidance on Test T. Soldering
Physical Testing of Rubber - Part A21 :
Determination of Rubber to Metal Bond
Strength - Section 21.2 Two Plate Method
Physical Testing of Rubber - Part A3 :
Determination of Tear Strength - Section
3.2 Small (Delft) Test Pieces
Physical Testing of Rubber - Part A59 :
Methods Using Plastimeters - Section 59.2
Determination of the Plasticity Retention
Index (PRI) of Raw Natural Rubber
Physical Testing of Rubber - Part A60 :
Curemetering - Section 60.1 Guide to the
Use of Curemeters
Environmental testing -- Test methods -Test Ff. Vibration - time-history method
Environmental testing -- Test methods -Test Fc. Vibration (sinusoidal)
Environmental testing -- Test methods --
BS EN 60068-2-62
BS EN 60068-2-64
BS EN 60068-2-65
BS EN 60068-2-66
BS EN 60068-2-7
BS EN 60721-1
BS EN 60721-3-0
BS EN 60721-3-3
BS EN 60721-3-4
BS EN 60721-3-7
BS EN 60721-3-9
BS 1610 : Part 1
Test Z/ABDM. Climatic sequence
Environmental testing -- Test methods -Test Ef. Impact, pendulum hammer
Environmental testing -- Test methods -Test Fh. Vibration, broad-band random
(digital control) and guidance
Environmental testing -- Test methods -Test Fg. Vibration, acoustically induced
Environmental testing -- Test methods -Test Cx. Damp heat, steady state
(unsaturated pressurized vapour)
Environmental testing -- Test methods -Test Ga and guidance. Acceleration, steady
state
Classification of environmental conditions
-- Environmental parameters and their
severities
Classification of environmental conditions
-- Classification of groups of
environmental parameters and their
severities -- Classification of
environmental conditions. Classification of
groups of environmental parameters and
their severities. Introduction
Classification of environmental conditions
-- Classification of groups of
environmental parameters and their
severities -- Stationary use at
weatherprotected locations
Classification of environmental conditions
-- Classification of groups of
environmental parameters and their
severities -- Stationary use at nonweatherprotected locations
Classification of environmental conditions
-- Classification of groups of
environmental parameters and their
severities -- Portable and non-stationary
use
Classification of environmental conditions
-- Classification of groups of
environmental parameters and their
severities -- Microclimates inside products
Materials testing machines and force
verification equipment -- Specification for
the grading of the forces applied by
BS 1610 : Part 3
BS 6140 : Part 1
BS 6888
BS 7003
BS 7347
BS 3042
BS 3683 : Part 1
BS 3683 : Part 2
BS 3683 : Part 3
BS 4331 : Part 1
BS 4331 : Part 2
BS 4331 : Part 3
BS 5165
BS 5650
BS 6443
BS EN 462-1
materials testing machines when used m
the compression mode
Materials testing machines and force
verification equipment -- Specification for
the grading of the forces applied by
deadweight and lever creep testing
machines
Test equipment for generating vibration -Methods of describing characteristics of
electrodynamic test equipment for
generating vibration
Methods of or calibration of bonded
electrical resistance strain gauges
Specification for spring-operated impacttest apparatus and its calibration
Guide for characteristics and performance
of mechanical shock testing machines
Test probes to verify protection by
enclosures
Glossary of terms used in non-destructive
testing -- Penetrant flaw detection
Glossary of terms used in non-destructive
testing -- Magnetic particle flaw detection
Glossary of terms used in non-destructive
testing -- Radiological flaw detection
Methods for assessing the performance
characteristics of ultrasortie flaw detection
equipment -- Overall performance : on-site
methods
Methods for assessing the performance
characteristics of ultrasonic flaw detection
equipment -- Electrical performance
Methods for assessing the performance
characteristics of ultrasortie flaw detection
equipment -- Guidance on the in-service
monitoring of probes (excluding immersion
probes)
Guide to the selection of low-power
magnifiers used for visual inspection
Specification for apparatus for gamma
radiography
Method for penetrant flaw detection
Non-destructive testing. Image quality of
radiographs -- Image quality indicators
(wire type). Determination of image quality
value
BS EN 462-2
BS EN 462-4
BS EN 473
BS EN 584-1
BS EN 25580
BS 746
BS 1494 : Part 1
BS 1579
BS 3111 : Part 1
BS 3111 : Part 2
BS 3382 : Part 7
BS 3382 : Parts 5 & 6
BS 3382 : Parts 3 & 4
BS 3382 : Parts 1 & 2
BS 4185 : Part 9
Non-destructive testing. Image quality of
radiographs -- Image quality indicators
(step/hole type). Determination of image
quality value
Non-destructive testing. Image quality of
radiographs -- Experimental evaluation of
image quality values and image quality
tables
General principles for qualification and
certification of NDT personnel
Non-destructive testing. Industrial
radiographic film -- Classification of film
systems for industrial radiography
Specification for minimum requirements
for industrial radiographic illuminators for
non-destructive testing
Specification for gas meter unions and
adaptors
Specification for fixing accessories for
building purposes -- Fixings for sheet, roof
and wall coverings
Specification for connectors for timber
Steel for cold forged fasteners and similar
components -- Specification for carbon and
low alloy steel wire
Steel for cold forged fasteners and similar
components -- Stainless steel
Specification for electroplated coatings on
threaded components -- Thicker platings
for threaded components
Specification for electroplated coatings on
threaded components -- Tin on copper and
copper alloy (including brass) components.
Silver on copper and copper alloy
(including brass) components
Specification for electroplated coatings on
threaded components -- Nickel or nickel
plus chromium on steel components.
Nickel or nickel plus chromium on copper
and copper alloy (including brass)
components
Specification for electroplated coatings on
threaded components -- Cadmium on steel
components. Zinc on steel components
Machine tool components -- Levelling
screws, nuts and seating plates
BS 4395 : Part 1
BS 4395 : Part 2
BS 6104 : Part 3
BS 6105
BS 6567
BS 6587
BS 7371: Part 1
BS 7371: Part 10
BS 7371: Part 11
BS 6322 : Part 1
BS 6322 : Part 2
BS 6322 : Part 3
BS 7371: Part 2
BS 7776
PD 6507
BS EN 20273
BS EN 20898-1
Specification for high strength friction grip
bolts and associated nuts and washers for
structural engineering -- General grade
Specification for high strength friction grip
bolts and associated nuts and washers for
structural engineering -- Higher grade bolts
and nuts and general grade washers
Mechanical properties of fasteners -Specification for set screws and similar
threaded fasteners not under tensile stresses
Specification for corrosion-resistant
stainless steel fasteners
Specification for ends of fasteners with
external metric ISO thread
Method of acceptance inspection for
fasteners
Coatings on metal fasteners -- Specification
for general requirements and selection
guidelines
Coatings on metal fasteners -- Specification
for organic coatings
Coatings on metal fasteners -- Specification
for zinc flake non-electrolytically applied
cured coatings
Tolerances for fasteners -- Specification for
tolerances of bolts, screws and nuts with
thread diameters ò 1.6 mm and ó 150 mm
and product grades A, B and C
Tolerances for fasteners -- Specification for
tolerances of bolts, screws and nuts with
thread diameters from 1 mm up to 3 mm
and product grade F, for fine mechanics
Tolerances for fasteners -- Specification for
tolerances of plain washers for bolts,
screws and nuts with nominal thread
diameters from 1 mm up to and including
150 mm. Product grades A and C
Coatings on metal fasteners -- Specification
for torque/clamping force relationship
Glossary of torque terminology for
threaded fasteners
Guidance on metric screw threads and
fasteners for use by model engineers
Fasteners. Clearance holes for bolts and
screws
Mechanical properties of fasteners -- Bolts,
BS EN 20898-2
BS EN 20898-7
BS 57
BS 325
BS 450
BS 768
BS 1083
BS 1210
BS 1768
BS 1769
BS 1981
BS 2470
BS 2693 : Part 1
BS 2693 : Part 2
BS 2692 : Part 2
BS 2692 : Part 3
BS 4168 : Part 1
BS 4168 : Part 2
BS 4168 : Part 3
screws and studs
Mechanical properties of fasteners -- Nuts
with specified proof load values. Coarse
thread
Mechanical properties of fasteners -Torsional test and minimum torques for
bolts and screws with nominal diameters 1
mm to 10 mm
Specification. B.A. screws bolts and nuts
Specification for black cup and
countersunk bolts and nuts
Specification for machine screws and
machine screw nuts (B.S.W. & B.S.F.
threads)
Specification for slotted grub screws
Specification for precision hexagon bolts,
screws and nuts (B.S.W. & B.S.F. threads)
Specification for wood screws
Specification for Unified precision hexagon
bolts, screws, & nuts (UNC & UNF
threads). Normal series
Specification. Unified black hexagon bolts,
screws, nuts (UNC & UNF threads). Heavy
series
Specification for unified machine screws
and machine screw nuts
Specification for hexagon socket screws
and wrench keys. Inch series
Specification for screwed studs -- General
purpose studs
Specification for screwed studs -Recommendations for high grade studs
(with Class 5 interference fit threads to
American Standard ASA B1.12)
Fuses for voltages exceeding 1000 V a.c. -Expulsion fuses
Fuses for voltages exceeding 1000 V a.c. -Guide to the determination of short circuit
power factor
Hexagon socket screws and wrench keys :
metric series -- Specification for hexagon
socket head cap screws
Hexagon socket screws and wrench keys :
metric series -- Specificatian for hexagon
socket set screws with flat point
Hexagon socket screws and wrench keys :
BS 4168 : Part 4
BS 4168 : Part 5
BS 4168 : Part 6
BS 4168 : Part 7
BS 4168 : Part 8
BS 4174
BS 4183
BS 4190
BS 4439
BS 4604 : Part 1
BS 4604 : Part 2
BS 4933
BS 6040
BS 6487
BS 6605
BS 7345
metric series -- Specification for hexagon
socket set screws with cone point
Hexagon socket screws and wrench keys :
metric series -- Specification for hexagon
socket set screws with dog point
Hexagon socket screws and wrench keys :
metric series -- Specification for hexagon
socket set screws with cup point
Hexagon socket screws and wrench keys :
metric series -- Specification for hexagon
socket butre, head screws
Hexagon socket screws and wrench keys :
metric series -- Specification for hexagon
socket shoulder screws
Hexagon socket screws and wrench keys :
metric series -- Specification for hexagon
socket countersunk head screws
Specification for self-tapping screws and
metallic drive screws
Specification for machine screws and
machine screw nuts. Metric series
Specification for ISO metric black hexagon
bolts, screws and nuts
Specification for screwed studs for general
purposes. Metric series Dimensions and
tolerances for screwed studs with ISO
metric threads in diameters from 3 mm to
39 mm inclusive, intended for general
purposes. Mechanical properties are given
only in respe
Specification for the use of high strength
friction grip bolts in structural steelwork.
Metric series -- General grade
Specification for the use of high strength
friction grip bolts in structural steelwork.
Metric series -- Higher grade (parallel
shank)
Specification for ISO metric black cup and
countersunk head bolts and screws with
hexagon nuts
Nomenclature for bolts, screws, nuts and
accessories
Specification for split pin holes and wire
holes in bolts, screws and studs
Specification for cross recesses for screws
Specification for nominal lengths of bolts,
BS 7364
BS 7419
BS 7433 : Part 1
BS 7433 : Part 2
BS 7433 : Part 3
BS 7496 : Part 1
BS 7496 : Part 2
BS 7496 : Part 3
BS 7599
BS 7600
BS 7670 : Part 1
BS 7715
BS 7795
BS 7814
BS MA 82
BS EN ISO 1479
screws and studs and thread lengths for
general purpose bolts
Specification for galvanized steel studs and
channels for stud and sheet partitions and
linings using screw fixed gypsum
wallboards
Specification for holding down bolts
Cross recessed machine screws -Specification for pan head screws of
product grade A
Cross recessed machine screws -Specification for countersunk flat head
screws product grade A and property class
4.8 only
Cross recessed machine screws -Specification for raised countersunk head
screws product grade A
Cross-recessed tapping screws -Specification for pan head screws
Cross-recessed tapping screws -Specification for countersunk flat head
screws
Cross-recessed tapping screws -Specification for raised countersunk head
screws
Specification for hexagon washer head
tapping screws
Specification for hexagon flange head
tapping screws
Steel nuts and bolts for resistance
projection welding -- Specification for
dimensions and properties
Specification for prevailing torque type
bolts, screws and studs with non-metallic
prevailing torque elements incorporated
into the thread
Specification for bolts, screws and studs
with a pre-applied micro-encapsulated
chemical adhesive feature incorporated into
the thread
Specification for bolts and screws
incorporating either underhead locking or
anti-rotation features
Specification for shipbuilding - oil and
water drain screws
Specification for hexagon-head tapping
BS EN ISO 1481
BS EN ISO 1482
BS EN ISO 1483
BS EN ISO 1580
BS EN ISO 2009
BS EN ISO 2010
BS EN ISO 4757
BS EN ISO 7045
BS EN ISO 7046-1
BS EN ISO 7046-2
BS EN ISO 7047
BS EN ISO 7049
BS EN ISO 7050
BS EN ISO 7051
BS EN ISO 7721-2
BS EN 20225
BS EN 22340
BS EN 22341
BS EN 24014
BS EN 24015
screws
Specification for slotted pan-head tapping
screws
Specification for slotted countersunk (flat)
head tapping screws (common head style)
Slotted raised countersunk (oval) head
tapping screws (common head style)
Slotted pan head screws. Product grade A
Slotted countersunk fiat head screws
(common head style). Product grade A
Countersunk slotted raised head screws
(common head style). Product grade A
Cross recesses for screws
Pan head screws with type H or type Z
cross recess. Product grade A
Countersunk fiat head screws (common
head style) with type H or type Z cross
recess. Product grade A -- Countersunk flat
head screws (common head style) with
type H or type Z cross recess. Product
grade A. Steel property class 4.8
Countersunk fiat head screws (common
head style) with type H or type Z cross
recess. Product grade A -- Steel of property
class 8.8, stainless steel and non-ferrous
metals
Countersunk raised head screws (common
head style) with type H or type Z cross
recess. Product grade A
Cross recessed pan head tapping screws
Specification for cross-recessed
countersunk (flat) head tapping screws
(common head style)
Specification for cross-recessed raised
countersunk (oval) head tapping screws
Countersunk flat head screws -- Penetration
depth of cross recesses
Fasteners. Bolts, screws, studs and nuts.
Symbols and designations of dimensions
Clevis pins without head
Clevis pins with head
Hexagon head bolts. Product grades A and
B
Hexagon head bolts. Product grade B.
Reduced shank (shank diameter pitch
diameter)
BS EN 24016
BS EN 24017
BS EN 24018
BS EN 24766
BS EN 26157-1
BS EN 26157-3
BS EN 27434
BS EN 27436
BS EN 27721
BS EN 28676
BS EN 28839
BS 2827
BS 3692
BS 4185 : Part 1
BS 4929:Part 1
BS 4929:Part 2
BS 7597
BS 7764
BS EN 24032
BS EN 24033
BS 2061
BS 3102
BS 3401
BS 3410
Hexagon head bolts. Product grade C
Hexagon head screws. Product grades A
and B
Hexagon head screws. Product grade C
Slotted set screws with flat point
Fasteners. Surface discontinuities -Fasteners. Surface discontinuities. Bolts,
screws and studs for general requirements
Fasteners. Surface discontinuities -- Bolts,
screws and studs for special requirements
Slotted set screws with cone point
Slotted set screws with cup point
Countersunk head screws. Head
configuration and gauging
Hexagon head screws with metric fine
pitch thread. Product grades A and B
Mechanical properties of fasteners. Bolts,
screws, studs and nuts made of non-ferrous
metals
Specification for machine screw nuts,
pressed type (B.A. and Whitworth form
threads)
Specification for ISO metric precision
hexagon bolts, screws and nuts. Metric
units
Machine tool components -- Locknuts ('C'
type, socket set screw locking)
Specification for steel hexagon prevailingtorque type nuts -- Metric series
Specification for steel hexagon prevailingtorque type nuts -- Unified (inch) series
Method of test for cone proof loading on
nuts
Specification for hexagon slotted nuts and
castle nuts
Hexagon nuts, style 1. Product grades A
and B
Hexagon nuts, style 2. Product grades A
and B
Specification for phosphor bronze spring
washers for general engineering purposes
Specification for brass eyelets and washers
for general purposes
Specification for beryllium copper crinkle
washers
Specification for metal washers for general
BS 3457
BS 4320
BS 4463
BS 4464
BS 7644 : Part 1
BS 7644 : Part 2
BS ISO 2982-2
BS EN 28738
BS 275
BS 641
BS 1109
BS 1974
BS 3575
BS 4620
BS 4894
BS 4895
BS 7349: Part 1
BS 7349: Part 2
BS 7805 : Part 1
BS 7850 : Part 2
BS 46 : Part 3
engineering purposes
Specification for materials for water tap
and stopvalve seat washers
Specification for metal washers for general
engineering purposes. Metric series
Specification for crinkle washers for
general engineering purposes. Metric series
Specification for spring washers for general
engineering and automobile purposes.
Metric series
Direct tension indicators -- Specification
for compressible washers
Direct tension indicators -- Specification
for nut face and bolt face washers
Rolling bearings. Accessories -- Locknuts
and locking devices. Dimensions
Plain washers for clevis pins. Product grade
A
Specification for dimensions of rivets (1/2
inch to 1 3/4 inch diameter)
Are welding sources, equipment and
accessories -- Dimensions of small rivets
for general purposes
Specification for cold forged mild steel
rivets for cold closing
Specification for large aluminium alloy
rivets (« in. to 1 in. nominal diameters)
Specification for rivets for the attachment
of friction linings
Specification for rivets for general
engineering purposes
Specification for bifurcated rivets for
general purpose use (metric series)
Specification for semi-tubular rivets for
general purpose use
Blind rivets with break mandrel -Specification for closed end blind rivets
Blind rivets with break mandrel -Specification for open end blind rivets
Swaged collar grooved rivets -Specification for sizes up to and including
10 mm diameter
Total quality management -- Guidelines for
quality improvement
Keys and keyways and taper pins -Specification for solid and split taper pins
BS 1202 : Part 1
BS 1202 : Part 2
BS 1202 : Part 3
BS 1574
BS 1804 : Part 1
BS 1804 : Part 2
BS 1804 : Part 3
BS 3537
BS 7564 : Part 5
BS 7564 : Part 6
BS 7564 : Part 7
BS 7564 : Part 8
BS 7564 : Part 1
BS 7564 : Part 10
BS 7564 : Part 2
BS 7564 : Part 3
BS 7564 : Part 4
BS 7564 : Part 9
BS 7724
BS EN 22338
BS EN 22339
BS EN 28733
BS EN 28736
BS EN 28737
BS EN 28749
BS 1098 : Part 1
for general engineering purposes
Specification for nails -- Steel nails
Specification for nails -- Copper nails
Specification for nails -- Aluminium nails
Specification for split pins (inch series)
Specification for parallel steel dowel pins -Inch series
Specification for parallel steel dowel pins -Metric series
Specification for parallel steel dowel pins -Parallel and taper types having screw
threads for extraction purposes. Metric
series
Specification for gudgeon pins up to 200
mm diameter
Tools for moulding -- Ejector pins with
cylindrical head. Dimensions
Tools for moulding -- Flat ejector pins
Tools for moulding -- Shouldered ejector
pins
Tools for moulding -- Angle pins. Basic
dimensions
Tools for moulding -- Bases-locating
elements
Tools for moulding -- Specification for
dimensions of support pillars
Tools for moulding -- Centring sleeves
Tools for moulding -- Mould guide pillars,
straight and shouldered, and locating guide
pillars, shouldered
Tools for moulding -- Mould guide bushes,
headed, and locating guide bushes, headed
Tools for moulding -- Ejector sleeves with
cylindrical head. Basic series for general
purposes
Specification for split pins (metric series)
Parallel pins, unhardened
Taper pins, unhardened
Parallel pins with internal thread,
unhardened
Taper pins with internal thread, unhardened
Taper pins with external thread,
unhardened
Pins and grooved pins. Shear test
Specification for jig bushes -- Inch units
BS 1098 : Part 2
BS 3673 : Part 1
BS 3673 : Part 2
BS 3673 : Part 3
BS 3673 : Part 4
BS 4185 : Part 2
BS 463 : Part 2
BS 951
BS 4185 : Part 13
BS 4185 : Part 14
BS 4377
BS 1832
BS 6129 : Part 1
BS 7352
BS 5600 : Part 5 : Section 5.1
BS 4480 : Part 1
BS 4480 : Part 2
BS 4480 : Part 3
BS 4480 : Part 4
BS 4480: Part 5
Specification for jig bushes -- Metric units
Specification for spring retaining rings -Carbon steel circlips
Specification for spring retaining rings -Carbon steel E clips
Specification for spring retaining rings -Carbon steel C clips
Specification for spring retaining rings -Carbon steel circlips - metric series
Machine tool components -- Collars
Specification for sockets for wire ropes -Metric units
Specification for clamps for earthing and
bonding purposes
Machine tool components -- Specification
for dimensions of counterbored holes
Machine tool components -- Method for
determination of the pilot diameter of 60ø
centre holes
Specification for tapping of holes to receive
wire thread inserts (ISO metric threads)
Specification for compressed asbestos fibre
jointing
Code of practice for the selection and
application of bellows expansion joints for
use in pressure systems -- Metallic bellows
expansion joints
Specification for strength and durability
performance of metal hinges for side
hanging applications and dimensional
requirements for template drilled hinges
Powder metallurgical materials and
products -- Material specifications for
sintered metal products, excluding
hardmetals -- Materials, for bearings,
impregnated with liquid lubricant
Plain bearings : metric series -- Sintered
bushes. Dimensions and tolerances
Plain bearings : metric series -- Solid
plastics bushes
Plain bearings : metric series -- Copper
alloy bushes
Plain bearings : metric series -Dimensions, tolerances and methods of
checking wrapped bushes
Plain bearings : metric series --
BS 4480: Part 6
BS 4480: Part 7
BS 4480: Part 8
BS 4480: Part 9
BS 5812 : Part 1
BS 5983 : Part 6
BS 5983 : Part 1
BS 5983 : Part 2
BS 5983 : Part 3
BS 5983 : Part 4
BS 5983 : Part 5
BS 7585 : Part 1
BS 7585 : Part 3
BS 7585 : Part 2
Dimensions, tolerances and methods of
checking thin-walled half bearings
Plain bearings : metric series -Specification for dimensions and tolerances
of ring type thrust washers made from strip
Plain bearings : metric series -Specification for dimensions and tolerances
of pressed bimetallic half thrust washers
Plain bearings : metric series -Specification for dimensions, tolerances
and methods of checking of thin-walled
fianged half bearings
Plain bearings : metric series -- Checking
the outside diameter of wrapped bushes
Materials for plain bearings -- Specification
for aluminium alloy for solid bearings
Metric spherical plain bearings -- Glossary
of terms
Metric spherical plain bearings -Specification for dimensions of spherical
plain radial bearings, joint type, dimension
series E and G
Metric spherical plain bearings -Specification for tolerances of spherical
plain radial bearings, joint type
Metric spherical plain bearings -Specification for dimensions of spherical
plain radial bearings, joint type, dimension
series EW, bearings with extended inner
ring
Metric spherical plain bearings -Specification for dimensions of spherical
plain radial bearings, joint type, dimension
series C
Metric spherical plain bearings -Specification for dimensions and tolerances
of spherical plain bearing rod ends,
dimension series E and JK
Metallic multilayer plain bearings -Method for non-destructive ultrasonic
testing of bond
Metallic multilayer plain bearings -Method for non-destructive die penetrant
testing
Metallic multilayer plain bearings -Method for destructive testing of bond for
BS 7675
BS 7679
BS 7762
BS 7772
BS 7823 : Part 1
BS 7823 : Part 2
BS 7823 : Part 3
BS ISO 12128
BS ISO 12129-2
BS ISO 12303
BS 3134 : Part 1
BS 292 : Part 1
BS 292 : Part 2
BS 3134 : Part 2
BS 3134 : Part 3
bearing metal layer thickness ò 2 mm
Plain bearings. Thin-walled half bearings.
Checking of peripheral length
Plain bearings. Quality control techniques
and inspection of geometrical and material
quality characteristics
Plain bearings. Quality characteristics.
Statistical process control (SPC)
Plain bearings. Measurement of wall
thickness of thin-walled half-bearings and
thin-walled bushes
Pedestal plain bearings -- Specification for
pillow blocks
Pedestal plain bearings -- Specification for
pillow blocks -- Specification for side
flange bearings
Pedestal plain bearings -- Specification for
side flange bearings
Plain bearings. Lubrication holes, grooves
and pockets. Dimensions, types,
designation and their application to bearing
bushes
Plain bearings -- Tolerances on form and
position and surface roughness for shafts,
flanges and thrust collars
Plain bearings. Quality characteristics.
Calculation of machine and process
capabilities
Metric tapered roller bearings -Specification for dimensions and tolerances
of single row bearings
Rolling bearings: ball bearings, cylindrical
and spherical roller bearings -Specification for dimensions of ball
bearings, cylindrical and spherical roller
bearings (metric series)
Rolling bearings: ball bearings, cylindrical
and spherical roller bearings -Specification for dimensions of ball
bearings and cylindrical roller bearings
(inch series)
Metric tapered roller bearings -Specification for dimensions of double row
bearings
Metric tapered roller bearings -Specification for dimensions of flanged
BS 3134 : Part 4
BS 3469
BS 5512
BS 5645
BS 5646 : Part 4
BS 5646 : Part 7
BS 5773 : Part 1
BS 5773 : Part 2
BS 5773 : Part 3
BS 5989 : Part 1
BS 5989 : Part 2
BS 6010 : Part 3
BS 6010 : Part 4
BS 6107 : Part 1
BS 6107 : Part 2
BS 6107 : Part 3
cups
Metric tapered roller bearings -Specification for designation system
Specification for instrument precision
rolling bearings (ball bearings)
Method of calculating dynamic load ratings
and rating life of rolling bearings
Specification for static load ratings for
rolling bearings
Rolling bearings. Accessories -Specification for plummer block housings
Rolling bearings. Accessories -Specification for flange dimensions of
radial ball bearings with flanged outer ring
Metric needle roller bearings -Specification for dimensions and tolerances
of.needle roller bearings : light and
medium series
Metric needle roller bearings -Specification for dimensions and tolerances
of needle roller bearings, drawn cup,
without inner ring
Metric needle roller bearings -Specification for dimensions and tolerances
of radial needle roller and cage assemblies
Rolling bearings : metric thrust bearings -Specification for dimensions of thrust
bearings
Rolling bearings: metric thrust bearings -Specification for tolerances of thrust ball
bearings
Rolling bearings, Bearings with spherical
outside surface and extended inner ring
width -- Specification for dimensions of
cast and pressed housings
Rolling bearings, Bearings with spherical
outside surface and extended inner ring
width -- Specification for insert bearings
and eccentric locking collars
Rolling bearings : tolerances -- Glossary of
terms
Rolling bearings : tolerances -Specification for tolerances of radial
bearings
Rolling bearings : tolerances -Specifications for radial internal clearance
BS 6267
BS 6560
BS 7637
PD 6487
BS ISO 246
BS ISO 464
BS ISO 582
BS ISO 2982-2
BS ISO 12043
BS ISO 12044
BS 4506
BS 4823
BS 5186
BS 5686
BS 6102 : Part 14
BS 7130
BS AU 227
BS 6613
BS 46 : Part 3
Specification for rolling bearings :
boundary dimensions for radial bearings
Glossary of terms for rolling bearings
Specification for linear motion,
recirculating ball, sleeve type rolling
bearings (metric series)
Guide for calculating the life of ball
bearings when used in contact with fire
resistant hydraulic fluids
Rolling bearings. Cylindrical roller
bearings, separate thrust collars. Boundary
dimensions
Rolling bearings. Radial bearings with
locating snap ring. Dimensions and
tolerances
Rolling bearings. Chamfer dimensions.
Maximum values
Rolling bearings. Accessories -- Locknuts
and locking devices. Dimensions
Rolling bearings. Single-row cylindrical
roller bearings. Chamfer dimensions for
loose rib and non-rib sides
Rolling bearings. Single-row angular
contact ball bearings. Chamfer dimensions
for outer ring non-thrust side
Specification for abaft ends
Guide to the selection of fitment bores for
cylindrical shaft ends
Specification for shaft centre heights
Specification for straight-sided splines for
cylindrical shafts : metric nominal
dimensions, tolerances and gauging
requirements
Cycles -- Specification for dimensions of
bottom bracket axle and crank assembly
with square end fittings
Specification for mechanical balancing of
rotating machinery: shaft and fitment key
convention
Specification for dimensions of cylindrical
shaft ends and hubs for alternators for
commercial vehicles and buses
Methods for specifying characteristics of
resilient shaft couplings
Keys and keyways and taper pins -Specification for solid and split taper pins
BS 46 : Part 1
BS 2059
BS 3550
BS 4235 : Part 1
BS 4235 : Part 2
BS 6186 : Part 1
DD ENV 843-3
BS 6186 : Part 1 : Addendum No. 1
BS EN ISO 6413
BS 3851
BS 3852 : Part 1
BS 6861 : Part 1
BS 6862 : Part 1
BS 7508
BS 7519
BS 1658
BS 1806
BS 4371
BS 4518
for general engineering purposes
Keys and keyways and taper pins -Specification. Keys and keyways
Specification for straight-sided splines and
serrations
Specification for involute splines
Specification for metric keys and keyways
-- Parallel and taper keys
Specification for metric keys and keyways
-- Woodruff keys and keyways
Specification for straight cylindrical
involute splines : metric module, side fit -Dimensions and tolerances
DD ENV 843-3 Advanced technical
ceramics - Monolithic ceramics Mechanical properties at room temperature
- Part 3 : Determination of subcritical crack
growth parameters from constant stressing
rate flexural strength tests
Specification for straight cylindrical
involute splines : metric module, side fit -Dimensions and tolerances -- Inspection
Technical drawings. Representation of
splines and serrations
Glossary of terms used in the mechanical
balancing of rotating machinery
Balancing machines -- Method of
description and evaluation
Balance quality requirements of rigid rotors
-- Method for determination of permissible
residual unbalance
Specification for cables for vehicles -Cables with copper conductors
Mechanical vibration. Methods and criteria
for the mechanical balancing of flexible
rotors
Mechanical vibration. Symbols for
balancing and associated instrumentation
Specification for housings for hydraulic
seals for reciprocating applications
Specification for dimensions of toroidal
sealing rings ('O'-rings) and their housings
(inch series)
Methods of test for rigid cellular materials - Specification for fibrous gland packings
Specification for metric dimensions of
BS 5106
BS 6121 : Part 1
BS 6121 : Part 2
BS 6121 : Part 3
BS 6121 : Part 5
BS 6241
BS 6442
BS 6997
BS EN ISO 9222-1
BS EN ISO 9222-2
BS EN 279
BS EN 291
BS EN 549
BS 1486 : Part 1
BS 1486 : Part 2
BS 1486 : Part 4
toroidal sealing rings ('O'-rings) and their
housings
Specification for dimensions of spiral antiextrusion back-up rings and their housings
Mechanical cable glands -- Specification
for metallic glands
Mechanical cable glands -- Specification
for polymeric glands
Mechanical cable glands -- Specification
for special corrosion resistant glands
Code of practice for selection, installation
and inspection of cable glands used in
electrical installations
Specification for dimensions of housings
for hydraulic seals incorporating bearing
rings for reciprocating applications
Specification for limits of surface
imperfections on elastomeric toroidal
sealing rings ('O'-rings)
Specification for elastomeric toroidal
sealing rings (`O'rings) manufactured from
acrylonitrile-butadiene rubbers complying
with BS 6996
Technical drawings. Seals for dynamic
application -- General simplified
representation
Technical drawings. Seals for dynamic
application -- Detailed simplified
representation
Specification for homogenous rubber
materials for dynamic seals in domestic
appliances using combustible gases up to
200 mbar
Rubber seals. Static seals in domestic
appliances for combustible gas up to 200
mbar. Specification for material
Specification for rubber materials for seals
and diaphragms for gas appliances and gas
equipment
Lubricating nipples -- Lubricating nipples
and adaptors for use on machinery and
vehicles
Lubricating nipples -- Heavy duty
lubricating nipples
Lubricating nipples -- Specification for
hydraulic grease nipples
BS 1726 : Part 1
BS 1726 : Part 2
BS 1726 : Part 3
BS 3173
BS 5431
BS 7568 : Part 12
BS 7568 : Part 13
BS 7612
BS 1658
BS 1806
BS 4518
BS 6984
BS EN 60447
BS 350 : Part 1
BS 350 : Part 2 : Supplement No. 1
BS 1957
BS 2856
BS 3693
BS 4727 : Part 1 : Group 04
Coil springs -- Guide for the design of
helical compression springs
Coil springs -- Guide for the design of
helical extension springs
Coil springs -- Guide for the design of
helical torsion springs
Specification for non-pocketed or open
type spring centre units for domestic
mattresses
Specification for bending springs for use
with copper tubes for water, gas and
sanitation
Press tools -- Elastomer pressure springs.
General specification
Press tools -- Elastomer pressure springs.
Specification of accessories
Specification for non-circular steel wire for
mechanical springs
Specification for housings for hydraulic
seals for reciprocating applications
Specification for dimensions of toroidal
sealing rings ('O'-rings) and their housings
(inch series)
Specification for metric dimensions of
toroidal sealing rings ('O'-rings) and their
housings
Specification for dimensions of housings
for elastomer-energized plastic-faced
hydraulic seals in reciprocating
applications
Man-machine interface (MMI). Actuating
principles
Conversion factors and tables -- Basis of
tables. Conversion factors
Conversion factors and tables -- Additional
tables for SI conversions
Presentation of numerical values (fineness
of expression; rounding of numbers)
Precise conversion of inch and metric sizes
on engineering drawings
Recommendations for design of scales and
indexes on analogue indicating instruments
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
BS 5233
BS 7789
PD 6461 : Part 1
PD 6461 : Part 2
PD 6461 : Part 3
PD 6532 : Part 1
PD 6532 : Part 2
PD 6532 : Part 3
BS ISO 5725-1
BS ISO 5725-3
BS ISO 5725-6
PD 6532 : Part 4
BS ISO 5725-2
BS ISO 5725-4
-- Measurement terminology
Glossary of terms used in metrology
(incorporating BS 2643)
Guide to design of measurement
laboratories
Vocabulary of metrology -- Basic and
general terms (internationa)
Vocabulary of metrology -- Vocabulary of
legal metrology- fundamental terms
Vocabulary of metrology -- Guide to the
expression of uncertainty in measurement
Reference materials. Guide to the contents
of certificates of reference materials -Guide to terms and definitions used in
connection with reference materials
Reference materials. Guide to the contents
of certificates of reference materials -Guide to the contents of certificates of
reference materials
Reference materials. Guide to the contents
of certificates of reference materials -Guide to the uses of certified reference
materials
Accuracy (trueness and precision) of
measurement methods and results -General principles and definitions
Accuracy (trueness and precision) of
measurement methods and results -Intermediate measures of the precision of a
standard measurement method
Accuracy (trueness and precision) of
measurement methods and results -- Use in
practice of accuracy values
Reference materials. Guide to the contents
of certificates of reference materials -Guide to general and statistical principles
for the certification of reference materials
Accuracy (trueness and precision) of
measurement methods and results -- Basic
methods for the determination of
repeatability and reproducibility of a
standard measurement method
Accuracy (trueness and precision) of
measurement methods and results -- Basic
methods for the determination of the
trueness of a standard measurement method
BS 3730 : Part 1
BS 4727 : Part 3 : Group 08
BS EN 22768-1
BS EN 22768-2
BS 969
BS 1916 : Part 1
BS 1916 : Part 2
BS 1916 : Part 3
BS 4359 : Part 2
BS 4359 : Part 4
BS 6741 : Part 1
BS 6741 : Part 2
BS 7079 : Part B2
BS 7079 : Part B3
BS 7079 : Part B4
Assessment of departures from roundness - Glossary of roundness measurement
terms
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Acoustics and electroacoustics
General tolerances -- Tolerances for linear
and angular dimensions without individual
tolerance indications
General tolerances -- Geometrical
tolerances for features without individual
tolerance indications
Specification for limits and tolerances on
plain limit gauges
Limits and fits for engineering -- Limits
and tolerances
Limits and fits for engineering -- Guide to
the selection of fits in BS 1916 : Part 1
Limits and fits for engineering -Recommendations for tolerances, limits
and fits for large diameters
Determination of the specific surface area
of powders -- Recommended air
permeability methods
Determination of the specific surface area
of powders -- Recommendations for
methods of determination of metal surface
area using gas adsorption techniques
Glossary of surface roughness terms -Surface and its parameters
Glossary of surface roughness terms -Measurement of surface roughness
parameters
Preparation of steel substrates before
application of paints and related products -Method for determination of chlorides on
cleaned surfaces
Preparation of steel substrates before
application of paints and related products -Assessment of dust on steel surfaces
prepared for painting (pressure-sensitive
tape method)
Preparation of steel substrates before
application of paints and related products --
BS 7079 : Part D1
BS 7079 : Part D2
BS 7591 : Part 1
BS 7591 : Part 2
BS 7591 : Part 4
DD 207
DD ENV 12381
BS EN ISO 3868
BS 939
BS 957 : Part 1
BS 958
BS 959
BS 1044 : Part 1
BS 1054
BS 1643
BS 1685
BS 1734
BS 1790
Guide to the estimation of the probability
of condensation on a surface to be painted
Preparation of steel substrates before
application of paints and related products -General principles
Preparation of steel substrates before
application of paints and related products -Abrasive blast-cleaning
Porosity and pore size distribution of
materials -- Method of evaluation by
mercury porosimetry
Porosity and pore size distribution of
materials -- Method of evaluation by gas
adsorption
Porosity and pore size distribution of
materials -- Method of evaluation by liquid
expulsion
Method of test for soluble iron corrosion
products to assess surface cleanliness of
steel substrates before application of paints
and related products
DD ENV 12381 Health care informatics Time standards for healthcare specific
problems
Metallic and other non-organic coatings.
Measurement of coating thicknesses.
Fizeau multiple-beam interferometry
method
Specification for engineers' squares
(including cylindrical and block squares)
Specification for feeler gauges -- Inch units
Specification for spirit levels for use in
precision engineering
Specification for internal micrometers
(including stick micrometers)
Specification for gauge blanks -- Plug, ring
and calliper gauges
Specification for engineers' comparators
for external measurement
Specification for precision vernier height
gauges
Specification for bevel protractors
(mechanical and optical)
Specification for micrometer heads
Specification for length bars and their
accessories (imperial units)
BS 3064
BS 3730 : Part 2
BS 3777
BS 4064
BS 4065
BS 4311 : Part 1
BS 4311 : Part 2
BS 4311 : Part 3
BS 4372
BS 4484: Part 1
BS 5204:Part 1
BS 5204:Part 2
BS 5317
BS 6365
BS 6808 : Part 1
BS 7334: Part 8
BS 7334: Part 7
BS 7334: Part 6
Specification for metric sine bars and sine
tables (excluding compound tables)
Assessment of departures from roundness - Specification for characteristics of stylus
instruments for measuring variations in
radius (including guidance on use and
calibration)
Specification for screw thread measuring
cylinders
Specification for plain setting rings for use
with internal diameter measuring machines.
Metric units
Specification for plain setting rings for use
with internal diameter measuring machines.
Inch units
Specification for gauge blocks and
accessories -- New gauge blocks
Specification for gauge blocks and
accessories -- Accessories
Specification for gauge blocks and
accessories -- Gauge blocks in use
Specification for engineers' steel measuring
rules
Specification for measuring instruments for
constructional works -- Metric graduation
and figuring of instruments for linear
measurement
Specification for straightedges -- Cast iron
straightedges (bow shaped and I-section)
Specification for straightedges -- Steel or
granite straightedges of rectangular section
Specification. Metric length bars and their
accessories
Specification for precision vernier depth
gauges
Coordinate measuring machines -Glossary of terms
Measuring instruments for building
construction -- Methods for determining
accuracy in use of electronic distancemeasuring instruments up to 150 m
Measuring instruments for building
construction -- Methods for determining
accuracy in use of instruments when used
for setting out
Measuring instruments for building
BS 7334: Part 5
BS 7334: Part 4
BS EN 10002-4
BS 3730 : Part 3
BS 5817 : Part 10
BS 5817 : Part 13
BS 5817 : Part 14
BS 5817 : Part 17
BS 5817 : Part 18
BS 5817 : Part 4
BS 5817 : Part 8
BS EN 60933-3
construction -- Methods for determining
accuracy in use of laser instruments
Measuring instruments for building
construction -- Methods for determining
accuracy in use of optical plumbing
instruments
Measuring instruments for building
construction -- Methods for determining
accuracy in use of theodolites
Tensile testing of metallic materials -Verification of extensometers used in
uniaxial testing
Assessment of departures from roundness - Methods for determining departures from
roundness using two- and three-point
measurement
Specification for audiovisual, video and
television equipment and systems -Specification for audio cassette systems
Specification for audiovisual, video and
television equipment and systems -Specification for a digital counter for audio
cassette systems
Specification for audiovisual, video and
television equipment and systems -Specification for audio striped card system
Specification for audiovisual, video and
television equipment and systems -Methods for specifying and measuring the
performance characteristics of audiolearning systems
Specification for audiovisual, video and
television equipment and systems -Specification for connectors for automatic
slide projectors with built-in triacs for
audiovisual application
Specification for audiovisual, video and
television equipment and systems -Specification for matching values for the
interconnection of equipment in a system
Specification for audiovisual, video and
television equipment and systems -Symbols and identification
Audio, video and audiovisual systems.
Interconnections and matching values -Specification for interface for the
BS 4054
BS 5942 : Part 2
BS 5942 : Part 12
BS 7429
BS EN 50094
BS 5942 : Part 13
BS 4847
BS 5942 : Part 11
BS 6288 : Part 11
BS 6288 : Part 6
BS 6840 : Part 2
BS 6840 : Part 1
BS 6840 : Part 10
interconnection of ENG cameras and
portable VTRs using non-composite
signals, for 625 line/50 field systems
Methods for measuring and expressing the
performance of radio receivers. Receivers
for a.m. and f.m. sound broadcast
transmissions
High fidelity audio equipment and systems;
minimum performance requirements -Specification for FM radio tuners
High fidelity audio equipment and systems;
minimum performance requirements -Specification for the sound output of
television tuners
Specification for television receivers and
monitors for use in education and training
Access control system for the MAC/packet
family : EUROCRYPT
High fidelity audio equipment and systems;
minimum performance requirements -Specification for high fidelity systems for
use in vehicles (for example, motor cars);
FM radio tuner units
Method of measurement of speed
fluctuations in sound recording and
reproducing equipment
High fidelity audio equipment and systems;
minimum performance requirements -Specification for high fidelity systems for
use in vehicles (for example, motor cars);
general requirements
Magnetic tape sound recording and
reproducing systems -- Guide to an address
code for compact cassettes
Magnetic tape sound recording and
reproducing systems -- Specification for
reel-to-reel systems
Sound system equipment -- Glossary of
general terms and calculation methods
Sound system equipment -- Methods for
specifying and measuring general
characteristics used for equipment
performance
Sound system equipment -- Methods for
specifying and measuring the
characteristics of peak programme level
BS 6840 : Part 13
BS 6840 : Part 15
BS 6840 : Part 17
BS 6840 : Part 3
BS 7133
BS 7443
BS 235
BS 436 : Part 1
BS 436 : Part 2
BS 436 : Part 3
BS 545
BS 721 : Part 1
BS 721 : Part 2
BS 978 : Part 1
BS 978 : Part 2
BS 978 : Part 3
BS 978 : Part 5
BS EN 61119-5
BS EN 61120-1
BS 1498
meters
Sound system equipment -- Guide for
listening tests on loudspeakers
Sound system equipment -- Specification
for matching values for the interconnection
of sound system components
Sound system equipment -- Methods for
specifying and measuring the
characteristics of standard volume
indicators
Sound system equipment -- Methods for
specifying and measuring the
characteristics of sound system amplifiers
Specification for audio recording - PCM
encoder/decoder system
Specification for sound systems for
emergency purposes
Specification for gears for electric traction
Spur and helical gears -- Basic rack form,
pitches and accuracy (diametral pitch
series)
Spur and helical gears -- Basic rack form,
modules and accuracy (1 to 50 metric
module)
Spur and helical gears -- Method for
calculation of contact and root bending
stress limitations for metallic involute gears
Specification for bevel gears (machine cut)
Specification for worm gearing -- Imperial
units
Specification for worm gearing -- Metric
units
Specification for fine pitch gears -Involute spur and helical gears
Specification for fine pitch gears -Cycloidal type gears
Specification for fine pitch gears -- Bevel
gears
Specification for fine pitch gears -- Hobs
and cutters
Digital audio tape cassette system (DAT) -DAT for professional use
Digital audio tape recorder reel to reel
system, using 6, 3 mm magnetic tape, for
professional use -- General requirements
Specification for gear bobbing machines
BS EN 61120-4
BS 2007
BS 2062 : Part 1
BS 2062 : Part 2
BS 2518 : Part 1
BS 2518 : Part 2
BS 2519 : Part 1
BS 2519 : Part 2
BS 2697
BS 3027
BS 3696 : Part 1
BS 4185 : Part 6
BS 4185 : Part 11
BS 4517
BS 4582: Part 2
BS 5221
BS 5575
BS 5246
BS 6168
BS 7676 : Part 1
for turbines and similar drives
Digital audio tape recorder reel to reel
system, using 6, 3 mm magnetic tape, for
professional use -- Magnetic tape
properties : definitions and methods of
measurement
Specification for circular gear shaving
cutters, 1 to 8 metric module, accuracy
requirements
Specification foe gear bobs -- Hobs for
general purposes, 1 d.p. to 20 d.p. inclusive
Specification foe gear bobs -- Hobs for
gears for turbine reduction and similar
drives
Specification for rotary form relieved gear
cutters -- Diametral pitch
Specification for rotary form relieved gear
cutters -- Metric module
Glossary for gears -- Geometrical
definitions
Glossary for gears -- Notation
Specification for rack type gear cutters,
metric module
Specification for dimensions of worm gear
units
Specification for master gears -- Spur and
helical gears (metric module)
Machine tool components -- Specification
for change gears
Machine tool components -Recommendations for accuracy grades of
gears
Specification for dimensions of spur and
helical geared motor units (metric series)
Specification for fine pitch gears (metric
module) -- Hobs and cutters
Specification for general purpose, metric
module gear hobs
Specification for spools for 1 in (25.4 mm)
video magnetic tape
Specification for pinion type cutters for
spur gears - 1 to 8 metric module
Specification for non-metallic spur gears
Acceptance code for gears -- Determination
of airborne sound power levels emitted by
gear units
BS 7676 : Part 2
BS 7848
BS 6415
BS 6502
BS 6552
BS 3733
BS 3790
BS 4548
BS 6889
BS 7620
BS 7360
BS 7537 : Part 2
BS 7595
BS 2947
BS 3032
BS 3551
BS 5594
BS 6710
BS EN 60735
BS 1658
Acceptance code for gears -- Determination
of mechanical vibrations of gear units
during acceptance testing
Gears. Wear and damage to gear teeth.
Terminology
Specification for audio-frequency
calibration tape for transverse track video
recorders
Specification for helical-scan video tape
cassette system using 12.65 mm (0.5 in)
magnetic tape on type Beta format
Specification for domestic and similar
electronic equipment. Interconnection
requirements: peritelevision connector
Specification for endless V-belt drives for
agricultural purposes
Specification for endless wedge belt drives
and endless V-belt drives
Specification for synchronous belt drives
for industrial applications
Specification for generating racks for
synchronous belt drive pulleys
Specification for industrial belt drives.
Specification for helical-scan digital
component video cassette recording system
using 19 mm magnetic tape (format D-1)
Measurement techniques and operational
adjustments of broadcast VTRs -- Guide to
special mechanical measurements and
alignments
Measuring method for chrominance signalto-random noise ratio for video tape
recorders
Specification for steel roller chains, types S
and C, attachments and chain wheels for
agricultural and similar machinery
Specification for higher tensile steel
shackles
Specification for alloy steel shackles
Specification for leaf chains, clevises and
sheaves
Specification for dimensions of chain
wheel tooth forming tools
Methods for measurement of video tape
properties
Specification for housings for hydraulic
BS 4675 : Part 2
BS 5138
BS 970 : Part 1
BS 970 : Part 4
BS 1486 : Part 1
BS 1486 : Part 2
BS 1486 : Part 4
BS EN 60856
BS 3766
BS 4507
BS 5077
BS 6060
BS 6061
BS EN 61077
BS 4836
DD ENV 12381
seals for reciprocating applications
Mechanical vibration in rotating machinery
-- Requirements for instruments for
measuring vibration severity
Specification for magnetic particle flaw
inspection of finished machined solid
forged and drop stamped crankshafts
Specification for Wrought Steels for
Mechanical and Allied Engineering
Purposes - Part 1 : General Inspection and
Testing Procedures and Specific
Requirements for Carbon, Carbon
Manganese, Alloy and Stainless Steels
Specification for Wrought Steels in the
Form of Blooms, Billets, Bars and
Forgings - Part 4 : Valve Steels
Lubricating nipples -- Lubricating nipples
and adaptors for use on machinery and
vehicles
Lubricating nipples -- Heavy duty
lubricating nipples
Lubricating nipples -- Specification for
hydraulic grease nipples
Specification for pre-recorded optical
reflective videodisk system "Laser vision"
50 Hz/625 lines. PAL
Specification for coolant pumps for
machine tools
Specification for grease gun cartridges
(composite type)
Specification for grease guns (handoperated lever type) for use with cartridges
complying with BS 4507
Specification for nipple-type lubrication
fittings for earth-moving machinery
Specification for transportable acetylene
containers
Specification for helical-scan video tape
cassette system using 12, 65 mm (0, 5 in)
magnetic tape on type VHS. Compact VHS
video cassette
Methods of test for full flow lubricating oil
filters for internal combustion engines
within the range 180 1/h to 14000 1/h (40
gal/h to 3150 gal/h)
DD ENV 12381 Health care informatics -
BS EN 61213
BS 799 : Part 5
BS 1563
BS 1564
BS 2594
BS 7777 : Part 1
BS 7777 : Part 2
BS 7777 : Part 3
BS 3441
BS 7122
BS 470
BS EN 61094-2
BS 3463
BS 5045:Part 1
Time standards for healthcare specific
problems
Analogue audio recording on video tape.
Polarity of magnetization
Oil burning equipment -- Specification for
oil storage tanks
Specification. Cast iron sectional tanks
(rectangular)
Specification for pressed steel sectional
rectangular tanks
Specification for carbon steel welded
horizontal cylindrical storage tanks
Flat-bottomed, vertical, cylindrical storage
tanks for low temperature service -- Guide
to the general provisions applying for
design, construction, installation and
operation
Flat-bottomed, vertical, cylindrical storage
tanks for low temperature service -Specification for the design and
construction of single, double and full
containment metal tanks for the storage of
liquefied gas at temperatures down to 165øC
Flat-bottomed, vertical, cylindrical storage
tanks for low temperature service -Recommendations for the design and
construction of prestressed and reinforced
concrete tanks and tank foundations, and
for the design and installation of tank
insulation, ta
Specification for tanks for the transport of
milk and liquid milk products
Specification for welded steel tanks for the
road transport of liquefiable gases
Specification for inspection, access and
entry openings for pressure vessels
Specification for measurement
microphones -- Primary method for
pressure calibration of laboratory standard
microphones by the reciprocity technique
Specification for observation and gauge
glasses for pressure vessels
Transportable gas containers -Specification for seamless steel gas
containers above 0.5 litre water capacity
BS 5045:Part 2
PD 6610
BS 5045:Part 3
BS 5045:Part 6
BS 5169
BS 5276 : Part 1
BS 5045:Part 5
BS 5276 : Part 2
BS 5276 : Part 3
BS 5276 : Part 4
BS 5430 : Part 1
BS 5430 : Part 2
BS 5430 : Part 6
Transportable gas containers -Specification for steel containers of 0.5 L
up to 450 L water capacity with welded
seams
PD 6610 Medical Informatics Methodology for the development of
healthcare messages
Transportable gas containers -Specification for seamless aluminium alloy
gas containers above 0.5 litre water
capacity and up to 300 bar charged
pressure at 15øC
Transportable gas containers -Specification for seamless containers of
less than 0.5 litre water capacity
Specification for fusion welded steel air
receivers
Pressure vessel details (dimensions) -Specification for davits for branch covers
of steel vessels
Transportable gas containers -Specification for aluminium alloy
containers above 0.5 litre up to 130 litres
water capacity with welded seams
Pressure vessel details (dimensions) -Specification for saddle supports for
horizontal cylindrical pressure vessels
Pressure vessel details (dimensions) -Dimensional tolerances for ferrous pressure
vessels
Pressure vessel details (dimensions) -Standardized pressure vessels
Periodic inspection, testing and
maintenance of transportable gas containers
(excluding dissolved acetylene containers)
-- Specification for seamless steel
containers of water capacity 0.5 litres and
above
Periodic inspection, testing and
maintenance of transportable gas containers
(excluding dissolved acetylene containers)
-- Specification for welded steel containers
of water capacity 0.5 L up to 150 L
Periodic inspection, testing and
maintenance of transportable gas containers
(excluding dissolved acetylene containers)
BS 6071
BS 6374 : Part 1
BS 6374 : Part 2
BS 6374 : Part 3
BS 6374 : Part 4
BS 6374 : Part 5
BS 7005
BS 7339
PD 6437
PD 6439
PD 6539
BS EN 286-1
-- Specification for seamless steel and
aluminium alloy containers having a water
capacity of less than 0.5 litre
Specification for periodic inspection and
maintenance of transportable gas containers
for dissolved acetylene
Lining of equipment with polymeric
materials for the process industries -Specification for lining with sheet
thermoplastics
Lining of equipment with polymeric
materials for the process industries -Specification for lining with non-sheet
applied thermoplastics
Lining of equipment with polymeric
materials for the process industries -Specification for lining with stoved
thermosetting resins
Lining of equipment with polymeric
materials for the process industries -Specification for lining with cold curing
thermosetting resins
Lining of equipment with polymeric
materials for the process industries -Specification for lining with rubbers
Specification for design and manufacture
of carbon steel unfired pressure vessels for
use in vapour compression refrigeration
systems
Code of practice for supplementary
checking of metallic materials of
construction in pressurized systems
A review of design methods given in
present standards and codes and design
proposals for nozzles and openings in
pressure vessels
A review of the methods of calculating
stresses due to local loads and local
attachments of pressure vessels
Guide to methods for the assessment of the
influence of crack growth on the
significance of defects in components
operating at high temperatures
Simple unfired pressure vessels designed to
contain air or nitrogen -- Design,
manufacture and testing
BS EN 764
BS 5576
PD 6497
PD 6510
PD 6550 : Part 2
PD 6550 : Part 3
PD 6550 : Part 4
BS EN 286-4
BS 3944 : Part 1
BS 4533: Part 102: Section 102.17
BS 5696 : Part 1
BS 7188
BS 5665 : Part 1
BS 7407
Pressure equipment. Terminology and
symbols. Pressure, temperature, volume
Specification for safety features of camping
tents, awnings, trailer tents and caravan
awnings
Stresses in horizontal cylindrical pressure
vessels supported on twin saddles : a
derivation of the basic equations and
constants used in G.3.3 of BS 5500 : 1982
A review of the present state of the art of
assessing remanent life of pressure vessels
and pressurized systems designed for high
temperature service
Explanatory supplement to BS 5500 : 1988
'Specification for unfired fusion welded
pressure vessels', section three 'Design' -Openings and branch connections
Explanatory supplement to BS 5500 : 1988
'Specification for unfired fusion welded
pressure vessels', section three 'Design' -Vessels under external pressure
Explanatory supplement to BS 5500 : 1988
'Specification for unfired fusion welded
pressure vessels', section three 'Design' -Heat exchanger tubesheets
Simple unfired pressure vessels designed to
contain air or nitrogen -- Aluminium alloy
pressure vessels designed for air braking
equipment and auxiliary pneumatic
equipment for railway rolling stock
Colour and diffusion filter material for
theatre, television and similar
entertainment purposes -- Specification for
flammability and dimensional stability
Luminaires -- Particular requirements -Specification for luminaires for stage
lighting, television, film and photographic
studios (outside and indoor)
Play equipment intended for permanent
installation outdoors -- Methods of test
Methods of test for impact absorbing
playground surfaces
Safety of toys -- Specification for
mechanical and physical properties
Specification for vehicles, directly
propelled by energy derived from a fuel,
PD 6530
BS EN 71-2
BS 5550 : Part 7 : Section 7.2 : Subsection
7.2.6
BS 5550 : Part 7 : Section 7.4 : Subsection
7.4.1
BS 5550 : Part 7 : Section 7.5 : Subsection
7.5.1
BS 1553 : Part 1
BS 4508: Part 1
BS 4508: Part 4
BS 5550 : Part 7 : Section 7.5 : Subsection
7.5.2
BS 5550 : Part 7 : Section 7.5 : Subsection
7.5.3
BS 4515
BS 5572
BS 5886
BS 5927
BS 6100 : Part 2 : Section 2.8
capable of carrying children
Explanatory supplement to BS 5665.
'Safety of toys' Part 1 : 1989. Specification
for mechanical and physical properties
Safety of toys -- Flammability
Cinematography -- Production and
presentation -- Screens and screen
luminance -- Specification for screen
luminance and colour for the projection of
motion-picture prints in indoor theatres and
review rooms
Cinematography -- Production and
presentation -- Sound -- Specifications and
measurements for the B-chain electroacoustic response of motion-picture control
rooms and indoor theatres
Cinematography -- Production and
presentation -- Film and television location
lighting -- Code of practice for distribution
of a.c. electricity for location lighting
Specification for graphical symbols for
general engineering -- Piping systems and
plant
Thermally insulated underground pipelines
-- Specification for steel cased systems
with air gap
Thermally insulated underground piping
system -- Specific testing and inspection
requirements for cased systems without air
gap
Cinematography -- Production and
presentation -- Film and television location
lighting -- Specification for location
lighting power distribution units
Cinematography -- Production and
presentation -- Film and television location
lighting -- Specification for plugs and
socket connectors
Specification for welding of steel pipelines
on land and offshore
Code of practice for sanitary pipework
Methods for field pressure testing of
asbestos-cement pipelines
Guide for laying of asbestos-cement
pipelines
Glossary of building and civil engineering
BS 7572
BS 8010 : Part 2 : Section 2.1
BS 8010 : Part 2 : Section 2.3
BS 8010 : Part 2 : Section 2.4
BS 8010 : Part 2 : Section 2.5
BS 8010 : Part 2 : Section 2.7
BS 8010 : Part 2 : Section 2.8
BS 8010 : Part 3
CP 2010 : Part 2
BS EN ISO 6412-1
BS EN ISO 6412-2
BS 1211
BS 2035
BS 3601
BS 3605 : Part 2
terms -- Civil engineering -- Pipelines and
ducts
Code of practice for thermally insulated
underground piping systems
Code of practice for pipelines -- Pipelines
on land : design, construction and
installation -- Ductile iron
Code of practice for pipelines -- Pipelines
on land : design, construction and
installation -- Asbestos cement
Code of practice for pipelines -- Pipelines
on land : design, construction and
installation -- Prestressed concreted
pressure pipelines
Code of practice for pipelines -- Pipelines
on land : design, construction and
installation -- Glass reinforced
thermosetting plastics
Code of practice for pipelines -- Pipelines
on land : design, construction and
installation -- Precast concrete
Code of practice for pipelines -- Pipelines
on land : design, construction and
installation -- Steel for oil and gas
Code of practice for pipelines -- Pipelines
subsea : design, construction and
installation
Code of practice for pipelines -- Design
and construction of steel pipelines in land
Technical drawings. Simplified
representation of pipelines -- General rules
and orthogonal representation
Technical drawings. Simplified
representation of pipelines -- Isometric
projection
Specification for centrifugally cast (spun)
iron pressure pipes for water, gas and
sewage
Specification for cast iron flanged pipes
and flanged fittings
Specification for carbon steel pipes and
tubes with specified room temperature
properties for pressure purposes
Austenitic stainless steel pipes and tubes
for pressure purposes Specification for
longitudinally welded tubes
BS 4622
BS 8010 : Part 2 : Section 2.1
BS 3602 : Part 2
BS 3604 : Part 2
PD 6610
BS 8010 : Part 2 : Section 2.8
BS EN 545
BS EN 969
BS 1306
BS 2782 : Part 11 : Method 1108A
BS 2782 : Part 11 : Method 1109A
BS 2782 : Part 11 : Method 1110
BS 2782 : Part 11 : Method 1112A
BS 3506
Specification for grey iron pipes and
fittings
Code of practice for pipelines -- Pipelines
on land : design, construction and
installation -- Ductile iron
Specification for steel pipes and tubes for
pressure purposes : carbon and carbon
manganese steel with specified elevated
temperature properties Specification for
longitudinally arc welded tubes
Steel pipes and tubes for pressure purposes
: ferritic alloy steel with specified elevated
temperature properties Specification for
longitudinally arc welded tubes
PD 6610 Medical Informatics Methodology for the development of
healthcare messages
Code of practice for pipelines -- Pipelines
on land : design, construction and
installation -- Steel for oil and gas
Ductile iron pipes, fittings, accessories and
their joints for water pipelines.
Requirements and test methods
Specification for ductile iron pipes, fittings,
accessories and their joints for gas
pipelines. Requirements and test methods
Specification for copper and copper alloy
pressure piping systems
Methods of testing plastics -Thermoplastics pipes, fittings and valves -True impact rate (TIR) boundaries of pipes
Methods of testing plastics -Thermoplastics pipes, fittings and valves -Resistance to environmental stress cracking
of polyethylene pipes and fittings for nonpressure applications
Methods of testing plastics -Thermoplastics pipes, fittings and valves -Tensile properties of dumb-bell specimens
from PVC gutter profiles of pipes for nonpressure applications
Methods of testing plastics -Thermoplastics pipes, fittings and valves -Leaktightness of thermoplastics pipes and
fittings for non-pressure applications
Specification for unplasticized PVC pipe
BS 3867
BS 4728
BS 5254
BS 5391 : Part 1
BS 5409 : Part 1
BS 5556
BS 6437
BS 6464
BS 7159
BS 5409 : Part 2
BS 5955 : Part 6
BS 5955 : Part 8
BS 8010 : Part 2 : Section 2.5
for industrial uses
Method of specifying outside diameters
and pressure ratings for pipe of
thermoplastics materials (inch series)
Method for determination of the resistance
to constant internal pressure of
thermoplastics pipe
Specification for polypropylene waste pipe
and fittings (external diameter 34.6 mm,
41.0 mm and 54.1 mm)
Specification for acrylonitrile-butadienestyrene (ABS) pressure pipe -- Pipe for
industrial uses
Specification for nylon tubing -- Fully
plasticized nylon tubing types 11 and 12
for use primarily in pneumatic installations
Specification for general requirements for
dimensions and pressure ratings for pipe of
thermoplastics materials (metric series)
Specification for polyethylene pipes (type
50) in metric diameters for general
purposes
Specification for reinforced plastics pipes,
fittings and joints for process plants
Code of practice for design and
construction of glass-reinforced plastics
(GRP) piping systems for individual plants
or sites
Specification for nylon tubing -- Plasticized
and unplasticized nylon tubing types 11
and 12 for use primarily in the automobile
industry
Plastics pipework (thermoplastics
materials) -- Code of practice for the
installation of unplasticized PVC pipework
for gravity drains and sewers
Plastics pipework (thermoplastics
materials) -- Specification for the
installation of thermoplastics pipes and
associated fittings for use in domestic hot
and cold water services and heating
systems
Code of practice for pipelines -- Pipelines
on land : design, construction and
installation -- Glass reinforced
thermosetting plastics
CP 312 : Part 1
CP 312 : Part 2
CP 312 : Part 3
BS EN ISO 9967
BS EN ISO 9969
BS EN ISO 12162
BS EN 578
BS EN 579
BS EN 580
BS EN 637
BS EN 638
BS EN 705
BS EN 727
BS EN 743
Code of practice for plastics pipework
(thermoplastics material) -- General
principles and choice of material
Code of practice for plastics pipework
(thermoplastics material) -- Unplasticized
PVC pipework for the conveyance of
liquids under pressure
Code of practice for plastics pipework
(thermoplastics material) -- Polyethylene
pipes for the conveyance of liquids under
pressure
Thermoplastics pipes. Determination of
creep ratio
Thermoplastics pipes. Determination of
ring stiffness
Thermoplastics materials for pipes and
fittings for pressure applications.
Classification and design. Overall service
(design) coefficient
Plastics piping systems. Plastics pipes and
fittings. Determination of the opacity
Plastics piping systems. Crosslinked
polyethylene (PE-X) pipes. Determination
of degree of crosslinking by solvent
extraction
Plastics piping systems. Unplasticized
poly(vinyl chloride) (PVC-U) pipes. Test
method for the resistance to
dichloromethane at a specified temperature
(DCMT)
Plastics piping systems. Glass-reinforced
plastics components. Determination of the
amounts of constituents using the
gravimetric method
Plastics piping and ducting systems.
Thermoplastics pipes. Determination of
tensile properties
Plastics piping systems. Glass-reinforced
thermosetting (GRP) pipes and fittings.
Methods for regression analyses and their
use
Plastics piping and ducting systems.
Thermoplastics pipes and fittings.
Determination of Vicat softening
temperature (VST)
Plastics piping and ducting systems.
BS EN 744
BS EN 761
BS EN 921
BS EN 922
BS 143 & 1256
BS 1306
BS 1740 : Part 1
BS 1965 : Part 1
BS 2035
BS 2051 : Part 1
BS 4622
BS EN 545
BS EN 969
BS EN 10242
BS 2782 : Part 11 : Method 1108A
Thermoplastics pipes. Determination of the
longitudinal reversion
Plastics piping and ducting systems.
Thermoplastics pipes. Test method for
resistance to external blows by the roundthe-clock method
Plastics piping systems. Glass-reinforced
thermosetting plastics (GRP) pipes.
Determination of the creep factor under dry
conditions
Plastics piping systems. Thermoplastics
pipes. Determination of resistance to
internal pressure at constant temperature
Plastics piping and ducting systems. Pipes
and fittings of unplasticized poly(vinyl
chloride) (PVC-U). Specimen preparation
for determination of the viscosity number
and calculation of the k-value
Specification for malleable cast iron and
cast copper alloy threaded pipe fittings
Specification for copper and copper alloy
pressure piping systems
Specification for wrought steel pipe fittings
(screwed BS 21 R-series thread) -- Metric
units
Specification for butt-welding pipe fittings
for pressure purposes -- Carbon steel
Specification for cast iron flanged pipes
and flanged fittings
Tube and pipe fittings for engineering
purposes -- Copper and copper alloys
capillary and compression tube fittings for
engineering purposes
Specification for grey iron pipes and
fittings
Ductile iron pipes, fittings, accessories and
their joints for water pipelines.
Requirements and test methods
Specification for ductile iron pipes, fittings,
accessories and their joints for gas
pipelines. Requirements and test methods
Threaded pipe fittings in malleable cast
iron
Methods of testing plastics -Thermoplastics pipes, fittings and valves -True impact rate (TIR) boundaries of pipes
BS 2782 : Part 11 : Method 1109A
BS 2782 : Part 11 : Method 1110
BS 2782 : Part 11 : Method 1112A
BS 4346 : Part 1
BS 4346 : Part 2
BS 4346 : Part 3
BS 5254
BS 6464
BS EN 578
BS EN 705
BS EN ISO 12162
BS EN 727
Methods of testing plastics -Thermoplastics pipes, fittings and valves -Resistance to environmental stress cracking
of polyethylene pipes and fittings for nonpressure applications
Methods of testing plastics -Thermoplastics pipes, fittings and valves -Tensile properties of dumb-bell specimens
from PVC gutter profiles of pipes for nonpressure applications
Methods of testing plastics -Thermoplastics pipes, fittings and valves -Leaktightness of thermoplastics pipes and
fittings for non-pressure applications
Joints and fittings for use with
unplasticized PVC pressure pipes -Injection moulded unplasticized PVC
fittings for solvent welding for use with
pressure pipes, including potable water
supply
Joints and fittings for use with
unplasticized PVC pressure pipes -Mechanical joints and fittings, principally
of unplasticized PVC
Joints and fittings for use with
unplasticized PVC pressure pipes -Specification for solvent cement
Specification for polypropylene waste pipe
and fittings (external diameter 34.6 mm,
41.0 mm and 54.1 mm)
Specification for reinforced plastics pipes,
fittings and joints for process plants
Plastics piping systems. Plastics pipes and
fittings. Determination of the opacity
Plastics piping systems. Glass-reinforced
thermosetting (GRP) pipes and fittings.
Methods for regression analyses and their
use
Thermoplastics materials for pipes and
fittings for pressure applications.
Classification and design. Overall service
(design) coefficient
Plastics piping and ducting systems.
Thermoplastics pipes and fittings.
Determination of Vicat softening
temperature (VST)
BS EN 763
BS EN 802
BS EN 803
BS EN 804
BS EN 922
BS 2598 : Part 2
BS 2598 : Part 3
BS 2598 : Part 4
BS 4625
BS 5911 : Part 100
BS 5911 : Part 101
BS 5911 : Part 103
BS 5911 : Part 110
Plastics piping and ducting systems.
Injection-moulded thermoplastics fittings.
Test method for visually assessing effects
of heating
Plastics piping and ducting systems.
Injection-moulded thermoplastics fittings
for pressure piping systems. Test method
for maximum deformation by crushing
Plastics piping systems. Injection-moulded
thermoplastics fittings for elastic sealing
ring type joints for pressure piping. Test
method for resistance to a short-term
internal pressure without end thrust
Plastics piping systems. Injection-moulded
socket fittings for solvent-cemented joints
for pressure piping. Test method for
resistance to a short-term internal
hydrostatic pressure
Plastics piping and ducting systems. Pipes
and fittings of unplasticized poly(vinyl
chloride) (PVC-U). Specimen preparation
for determination of the viscosity number
and calculation of the k-value
Glass plant, pipeline and fittings -Specification for testing, handling and use
Glass plant, pipeline and fittings -Specification for pipeline and fittings of
nominal bore 15 to 150 mm : compatibility
and interchangeability
Glass plant, pipeline and fittings -Specification for glass plant components
Specification for prestressed concrete
pressure pipes (including fittings)
Precast concrete pipes, fittings and
ancillary products -- Specification for
unreinforcod and reinforced pipes and
fittings with flexible joints
Precast concrete pipes, fittings and
ancillary products -- Specification for glass
composite concrete (GCC) pipes and
fittings with flexible joints
Precast concrete pipes, fittings and
ancillary products -- Specification for
prestressed non-pressure pipes and fittings
with flexible joints
Precast concrete pipes, fittings and
BS 5911 : Part 114
BS 5911 : Part 2
BS 5911 : Part 230
BS 8010 : Part 2 : Section 2.7
DD 76 : Part 2
BS 8010 : Part 2 : Section 2.4
BS EN 295-5
BS EN 512
BS EN 639
BS EN 640
BS EN 641
BS EN 642
BS 1560 : Part 3 : Section 3.1
BS 1560 : Part 3 : Section 3.2
ancillary products -- Specification for ogee
pipes and fittings (including perforated)
Precast concrete pipes, fittings and
ancillary products -- Specification for
porous pipes
Precast concrete pipes, fittings and
ancillary products -- Specification for
inspection chambers
Precast concrete pipes, fittings and
ancillary products -- Specification for road
gullies and gully cover slabs
Code of practice for pipelines -- Pipelines
on land : design, construction and
installation -- Precast concrete
Precast concrete pipes of composite
construction -- Precast concrete pipes
strengthened by chopped zinc-coated steel
fibres
Code of practice for pipelines -- Pipelines
on land : design, construction and
installation -- Prestressed concreted
pressure pipelines
Vitrified clay pipes and fittings and pipe
joints for drains and sewers -Requirements for perforated vitrified clay
pipes and fittings
Fibre-cement products. Pressure pipes and
joints
Common requirements for concrete
pressure pipes including joints and fittings
Reinforced concrete pressure pipes and
distributed reinforcement concrete pressure
pipes (non-cylinder type), including joints
and fittings
Reinforced concrete pressure pipes,
cylinder type, including joints and fittings
Prestressed concrete pressure pipes,
cylinder and non-cylinder, including joints,
fittings and specific requirement for
prestressing steel for pipes
Circular flanges for pipes, valves and
fittings (Class designated) -- Steel, cast iron
and copper alloy flanges -- Specification
for steel flanges
Circular flanges for pipes, valves and
fittings (Class designated) -- Steel, cast iron
BS 1560 : Part 3 : Section 3.3
BS 1782
BS 1906
BS 2761
BS 4346 : Part 2
BS 4346 : Part 3
BS 4368 : Part 1
BS 4368 : Part 3
BS 4368 : Part 4
BS 4504: Part 3: Section 3.1
BS 5114
PD 6438
BS 1109
BS 3628
BS 4504: Part 3: Section 3.2
BS 4504: Part 3: Section 3.3
and copper alloy flanges -- Specification
for cast iron flanges
Circular flanges for pipes, valves and
fittings (Class designated) -- Steel, cast iron
and copper alloy flanges -- Specification
for copper alloy and composite flanges
Specification for couplings for suction and
delivery hose (1 1/2 in. to 8 in. nominal
sizes) other than fire hose couplings
Specification for hose couplings (air and
water) (1/8 in. to 1 1/4 in. nominal sizes)
Specification for spherical ground joints
Joints and fittings for use with
unplasticized PVC pressure pipes -Mechanical joints and fittings, principally
of unplasticized PVC
Joints and fittings for use with
unplasticized PVC pressure pipes -Specification for solvent cement
Compression couplings for tubes -Specification for heavy series couplings
(metric)
Compression couplings for tubes -Specification for light series couplings
(metric)
Compression couplings for tubes -Specification for type test requirements
Circular flanges for pipes, valves and
fittings (PN designated) -- Steel, cast iron
and copper alloy flanges -- Specification
for steel fiange
Specification for performance requirements
for joints and compression fittings for use
with polyethylene pipes
A review of present methods for design of
bolted flanges for pressure vessels
Specification for cold forged mild steel
rivets for cold closing
Specification for hose clips (worm drive
type) for general purpose use
Circular flanges for pipes, valves and
fittings (PN designated) -- Steel, cast iron
and copper alloy flanges -- Specification
for steel fiange-- Specification for cast iron
flanges
Circular flanges for pipes, valves and
BS EN 712
BS EN 713
BS EN 714
BS EN 715
BS 5122
BS 5173:Part 103: Section 103.6
BS 5173:Part 100
BS 5173:Part 101: Section 101.2
BS 5173:Part 102: Section 102.10
BS 5173:Part 102: Section 102.3
fittings (PN designated) -- Steel, cast iron
and copper alloy flanges -- Specification
for copper alloy and composite flanges
Thermoplastics piping systems. End-load
bearing mechanical joints between pressure
pipes and fittings. Test method for
resistance to pull-out under constant
longitudinal force
Plastics piping systems. Mechanical joints
between fittings and polyolefin pressure
pipes. Test method for leaktightness under
internal pressure of assemblies subjected to
bending
Thermoplastics piping systems. Non-endload-bearing elastomeric sealing ring type
joints between pressure pipes and moulded
fittings. Test method for leaktightness
under internal hydrostatic pressure without
end thrust
Thermoplastics piping systems. End-loadbearing joints between small diameter
pressure pipes and fittings. Test method for
leaktightness under internal water pressure,
including end thrust
Specification for rubber hoses for lowpressure and medium-pressure saturated
steam
Methods of test for rubber and plastics
hoses and hose assemblies -- Physical tests
-- Determination of ignitability of lining
Methods of test for rubber and plastics
hoses and hose assemblies -- General
introduction
Methods of test for rubber and plastics
hoses and hose assemblies -- Determination
of dimensions -- Measurement of length of
hoses and hose assemblies
Methods of test for rubber and plastics
hoses and hose assemblies -- Hydraulic
pressure tests -- Hydrostatic tests for oil
suction and discharge hose
Methods of test for rubber and plastics
hoses and hose assemblies -- Hydraulic
pressure tests -- Determination of
volumetric expansion of fuel-dispensing
pump hoses
BS 5173:Part 102: Section 102.4
BS 5173:Part 102: Section 102.7
BS 5173:Part 103: Section 103.13
BS 5244
BS 5342
BS 5842
BS 6066
BS 5173:Part 103: Section 103.2
BS 5173:Part 103: Section 103.7
BS 5173:Part 106: Section 106.2
BS 6501 : Part 1
BS 6501 : Part 2
BS EN ISO 7840
BS EN ISO 8469
BS EN 24641
BS EN 28028
Methods of test for rubber and plastics
hoses and hose assemblies -- Hydraulic
pressure tests -- Determination of
volumetric expansion of hydraulic hoses
Methods of test for rubber and plastics
hoses and hose assemblies -- Hydraulic
pressure tests -- Pressure impulse test with
flexing for high pressure hydraulic hoses
(half omega configuration)
Methods of test for rubber and plastics
hoses and hose assemblies -- Physical tests
-- Determination of resistance to fire
Recommendations for application, storage
and life expiry of hydraulic rubber hoses
and hose assemblies
Specification for rubber hoses for highpressure saturated steam
Specification for thermoplastic hose
assemblies for dock, road and tanker use
Specification for thermoplastics hoses for
compressed air
Methods of test for rubber and plastics
hoses and hose assemblies -- Physical tests
-- Determination of crush resistance of
hoses
Methods of test for rubber and plastics
hoses and hose assemblies -- Physical tests
-- Determination of fracture resistance of
rigid polymer helical reinforcement in
thermoplastics hoses
Methods of test for rubber and plastics
hoses and hose assemblies -Environmental tests -- General
requirements for high temperature ageing
tests
Flexible metallic hose assemblies -Specification for corrugated hose
assemblies
Specification for strip wound hoses and
hose assemblies
Small craft. Fire resistant fuel hoses
Small craft. Non-fire-resistant fuel hoses
Rubber hoses for water suction and
discharge. Specification
Rubber and/or plastics hose assemblies for
airless paint spraying. Specification
BS EN 28031
BS 2494
BS 3063
BS 3381
BS 4249
BS 4865 : Part 1
BS 4865 : Part 2
BS 4865 : Part 3
BS 4865 : Part 4
BS 5292
BS 6209
BS 6956 : Part 1
BS 6956 : Part 6
BS 6956 : Part 7
BS 7076 : Part 1
BS 7076 : Part 2
Rubber and plastics hoses and hose
assemblies. Determination of electrical
resistance
Specification for elastomeric seals for
joints in pipework and pipelines
Specification for dimensions of gaskets for
pipe flanges
Specification for spiral wound gaskets for
steel flanges to BS 1560
Specification for paper and cork/paler
jointing
Dimensions of gaskets for flanges to BS
4504 -- Specification for non-metallic flat
gaskets (including gaskets for flanges to
BS 4772)
Dimensions of gaskets for flanges to BS
4504 -- Specification for spiral wound
gaskets for use with steel flanges
Dimensions of gaskets for flanges to BS
4504 -- Specification for non-metallic
envelope gaskets
Dimensions of gaskets for flanges to BS
4504 -- Specification for corrugated, flat or
grooved metallic and filled metallic gaskets
for use with steel flanges
Specification for jointing materials and
compounds for installations using water,
low-pressure steam or 1st, 2nd and 3rd
family gases
Specification for solvent cement for nonpressure thermoplastics pipe systems
Jointing materials and compounds -Specification for corrugated metal joint
rings
Jointing materials and compounds -Specification for jointing compounds for
3rd family gases
Jointing materials and compounds -Specification for anaerobic jointing
compounds for use with 1st, 2nd and 3rd
family gases
Dimensions of gaskets for flanges to BS
1560 -- Specification for non-metallic flat
gaskets
Dimensions of gaskets for flanges to BS
1560 -- Specification for metallic ring-joint
BS 7076 : Part 3
BS 7076 : Part 4
BS 5731
BS 7677
BS EN 253
BS EN 26553
BS EN 26554
BS EN 26704
BS EN 27841
BS EN 27842
BS 599
BS 1394 : Part 2
BS 3456 : Part 202 : Section 202.41
BS 4082 : Part 1
BS 4082 : Part 2
BS 5257
BS 5316 : Part 1
BS 5316 : Part 2
gaskets for use with steel flanges
Dimensions of gaskets for flanges to BS
1560 -- Specification for non-metallic
envelope gaskets
Dimensions of gaskets for flanges to BS
1560 -- Specification for corrugated, flat or
grooved metallic and filled metallic gaskets
Specification for mountings and apertures
for external equipment controls on
agricultural and forestry tractors
Recommendations for classification of
imperfections in pipe joint rings
Preinsulated bonded pipe systems for
underground hot water networks. Pipe
assembly of steel service pipes,
polyurethane thermal insulation and outer
casing of high density polythylene
Specification for marking of automatic
steam traps
Specification for face-to-face dimensions
for ranged automatic steam traps
Classification of automatic steam traps
Methods for determination of steam loss of
automatic steam traps
Methods for determination of discharge
capacity of automatic steam traps
Methods of testing pumps
Stationary circulation pumps for heating
and hot water service systems -Specification for physical and performance
requirements
Specification for safety of household and
similar electrical appliances Particular
requirements Electric pumps for liquids
having a temperature not exceeding 35øC
Specification for external dimensions for
vertical in-line centrifugal pumps -- T Type
Specification for external dimensions for
vertical in-line centrifugal pumps -- 'U'
Type
Specification for horizontal end-suction
centrifugal pumps (16 bar)
Specification for acceptance tests for
centrifugal, mixed flow and axial pumps -Class C tests
Specification for acceptance tests for
BS 5316 : Part 3
BS 7736
BS 7784
BS EN 733
BS EN 734
BS EN 735
BS EN 22858
BS EN 23661
BS EN 60041
BS EN 60335-2-51
BS 2917 : Part 1
BS 4575: Part 1
BS 4575: Part 2
BS 4575: Part 3
BS 4832
centrifugal, mixed flow and axial pumps -Class B tests
Specification for acceptance tests for
centrifugal, mixed flow and axial pumps -Precision class tests
Technical specifications for centrifugal
pumps. Class III
Technical specifications for centrifugal
pumps. Class I
End-suction centrifugal pumps, rating with
10 bar with bearing bracket. Nominal duty
point, main dimensions, designation system
Side channel pumps PN 40. Nominal duty
point, main dimensions, designation system
Overall dimensions of rotodynamic pumps.
Tolerances
End-suction centrifugal pumps (rating 16
bar). Designation, nominal duty point and
dimensions
End-suction centrifugal pumps. Baseplate
and installation dimensions
Field acceptance tests to determine the
hydraulic performance of hydraulic
turbines, storage pumps and pump-turbines
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Stationary circulation
pumps for heating and service water
installations
Graphic symbols and circuit diagrams for
fluid power systems and components -Specification for graphic symbols
Fluid power transmission and control
systems -- Guide for hydraulic equipment
and systems
Fluid power transmission and control
systems -- Code of practice for pneumatic
equipment and systems
Fluid power transmission and control
systems -- Code of practice for the
technical specification, design,
construction, commissioning and safe
application of hydraulic and pneumatic
fluid power systems
Specification for compatibility between
elastomeric materials and hydraulic fluids
BS 5944 : Part 1
BS 5944 : Part 2
BS 5944 : Part 4
BS 5944 : Part 5
BS 5944 : Part 6
BS 7265
BS 7268
BS 7294
BS 7388
BS EN 60995
BS 4617
BS 7250
BS 7275 : Part 1
Measurement of airborne noise from
hydraulic fluid power systems and
components -- Method of test for pumps
Measurement of airborne noise from
hydraulic fluid power systems and
components -- Method of test for motors
Measurement of airborne noise from
hydraulic fluid power systems and
components -- Method of determining
sound power levels from valves controlling
flow and pressure
Measurement of airborne noise from
hydraulic fluid power systems and
components -- Simplified method of
determining sound power levels from
pumps using an anechoic chamber
Measurement of airborne noise from
hydraulic fluid power systems and
components -- Method of test for pumps
using a parallelepiped microphone array
Code of practice for assessing the
cleanliness of hydraulic fluid power
components
Method of test for determination of fatigue
pressure rating of metal pressure containing
envelopes in hydraulic fluid power systems
Methods for determination of flow-rate
characteristics of pneumatic fluid power
components
Guide for prevention of leaks from
hydraulic fluid power systems Design of
hydraulic systems and their installation
with a view to minimizing external leakage
of fluids.
Determination of the prototype
performance from model acceptance tests
of hydraulic machines with the
consideration of scale effects
Methods for determining the performance
of pumps and motors for hydraulic fluid
power transmission
Methods of determining the derived
capacity of hydraulic fluid power positive
displacement pumps and motors
Determination of hydraulic fluid power
motor characteristics -- Method at constant
BS 7275 : Part 2
BS 7275 : Part 3
BS 5755
BS 6331 : Part 1
BS 6331 : Part 3
BS 6331 : Part 4
BS 6858
BS ISO 6020-2
BS ISO 6431
BS ISO 8139
BS ISO 8140
BS 778
BS 3832
BS 4062 : Part 1
BS 4062 : Part 2
low speed and at constant pressure
Determination of hydraulic fluid power
motor characteristics -- Method for
startability
Determination of hydraulic fluid power
motor characteristics -- Method at constant
flow and at constant torque
Specification for dimensions of basic
features of fluid power cylinders
Mounting dimensions of single rod double
acting hydraulic cylinders -- Specification
for 160 bar medium series
Mounting dimensions of single rod double
acting hydraulic cylinders -- Specification
for 250 bar series
Mounting dimensions of single rod double
acting hydraulic cylinders -- Specification
for 63 bar series, including associated
components
Specification for manually operated
positioning devices and associated
anchorage lines for use with industrial
safety belts and harnesses
Hydraulic fluid power. Mounting
dimensions for single rod cylinders, 16
MPa (160 bar) series -- Compact series
Pneumatic fluid power. Single rod
cylinders, 1 000 kPa (10 bar) series, with
detachable mountings, bores from 32 mm
to 320 ram. Mounting dimensions
Pneumatic fluid power. Cylinders, 1 100
kPa (10 bar) series. Rod end spherical eyes.
Mounting dimensions
Pneumatic fluid power. Cylinders, 1 000
kPa (10 bar) series. Rod end clevis.
Mounting dimensions
Specification for steel pipes and joints for
hydraulic purposes
Specification for wire reinforced rubber
hoses and hose assemblies for hydraulic
installations
Valves for hydraulic fluid power systems -Methods for determining pressure
differential/flow characteristics
Valves for hydraulic fluid power systems -Methods for determining performance
BS 4151
BS 4586
BS 4749
BS 4983
BS 5200
BS 5242 : Part 1
BS 5242 : Part 2
BS 5327
BS 5380
BS 5995
BS 6275 : Part 1
BS 6275 : Part 2
BS 6275 : Part 3
BS 6276
BS 6277
BS 6361
BS 6494 : Part 2
Method of evaluating pneumatic valve
positioners with input signal of 3 to 15
lbf/in2 (gauge)
Specification for spiral wire reinforced
rubber covered hydraulic hoses and hose
assemblies
Specification for textile reinforced rubber
hydraulic hoses and hose assemblies
Specification for textile reinforced
thermoplastics hydraulic hoses and hose
assemblies
Specification for dimensions of hydraulic
connectors and adaptors
Tubes for fluid power cylinder barrels -Specification for steel tubes with specially
finished surfaces
Tubes for fluid power cylinder barrels -Specification for non-ferrous metallic tubes
with specially finished bores
Specification. Swept elbow bends for fluid
power applications
Specification for hydraulic port and stud
coupling using 'O'-ring sealing and 'G'
series fastening threads
Methods of test for electrohydraulic
servovalves
Hydraulic fluid power filter elements -Method of evaluating filtration
performance (multi-pass method)
Hydraulic fluid power filter elements -Methods of test to verify structural
integrity
Hydraulic fluid power filter elements -Specification for marking
Specification for dimensions and
identification code for mounting flanges
and shafts ends for hydraulic fluid power
pumps and motors
Method for determination of pressure
drop/flow characteristics of hydraulic fluid
power filters
Specification for three-pin plug connectors
for electrically controlled fluid power
equipment
Hydraulic fluid power valve mounting
surfaces -- Specification for four-port and
BS 6494 : Part 3
BS 6494 : Part 4
BS 6494 : Part 5
BS 6494 : Part 6
BS 6537
BS 6851
BS 7198: Part 1
BS 7198: Part 2
BS 7296 : Part 1
BS 7389: Part 1
BS 7416
BS 7417
BS 7504
BS 7714
BS 7796
five-port servo-valves
Hydraulic fluid power valve mounting
surfaces -- Specification for pressure-relief
valves
Hydraulic fluid power valve mounting
surfaces -- Specification for clamping
dimensions of four-part, size 03 and 05,
modular stack valves and directional
control valves
Hydraulic fluid power valve mounting
surfaces -- Specification for compensated
flow-control valves
Specification for pressure-control valves
(excluding pressure-relief valves),
sequence valves, unloading valves, throttle
valves and check valves
Specification for staple type connectors for
hydraulic fluid power applications
Method for preparing a statement of
requirements for hydraulic fluid power
filters
Hydraulic fluid power quick-action
couplings -- Specification for dimensions
and performance
Hydraulic fluid power quick-action
couplings -- Methods of test
Cavities for hydraulic fluid power cartridge
valves -- Specification for two-port slip-in
valves
Pneumatic fluid power valve mounting
surfaces -- Specification for five-port
directional control valves (without
electrical connector)
Specification for precision finished
seamless cold-drawn low carbon steel tubes
for use in hydraulic fluid power systems
Specification for interface dimensions of
flat face 'O'-ring seal hydraulic couplings
Hydraulic fluid power. Four-screw, onepiece square flange connections for use at
pressures of 25 MPa and 40 MPa (250 bar
and 400 bar)
Guide for care and handling of seals for
fluid power applications
Specification for hydraulic fluid power.
Four-screw split-flange connections for use
BS 7847
DD 195 : Part 1
BS ISO 6149-2
BS ISO 6149-1
BS ISO 6149-3
BS ISO 8434-1
BS ISO 8434-2
BS ISO 8434-3
BS 5751
BS 6525
BS 7201: Part 1
BS 7201: Part 2
BS 416 : Part 1
BS 2852 : Part 1
BS 3456 : Part 102 : Section 102.342
at pressures of 2,5 MPa to 40 Mpa (25 bar
to 400 bar). Type 1 metric series and type
11 inch series
Fluid power systems and components.
Connectors and associated components.
Nominal pressures
Hydraulic couplings -- Method of test for
coupling port threads and their seals
intended for use in fluid power systems
Heavy-duty (S series) stud ends.
Dimensions, design, test methods and
requirements.
Connections for fluid power and general
use. Ports and stud ends with ISO 261
threads and O-ring sealing -- Ports with Oring in truncated housing
Connections for fluid power and general
use. Ports and stud ends with ISO 261
threads and O-ring sealing -- Light-duty (L
series) stud ends. Dimensions, design, test
methods and requirements
Metallic tube connections for fluid power
and general use -- 24ø compression fittings
Metallic tube connections for fluid power
and general use -- 37ø flared fittings
Metallic tube connections for fluid power
and general use -- O-ring face seal fittings
Specification for dimensions of housings
for hydraulic seals for reciprocating
applications
Specification for design and construction of
reservoirs used in hydraulic fluid power
systems
Hydraulic fluid power. Gas loaded
accumulators -- Specification for seamless
steel accumulator bodies above 0.5 L water
capacity
Hydraulic fluid power. Gas loaded
accumulators -- Dimensions of gas ports
Discharge and ventilating pipes and
fittings, sand-cast or spun in cast iron -Specification for spigot and socket systems
Testing for rating of room air-conditioners
-- Method of testing for rating of room airconditioners for cooling performance
Specification for safety of household and
BS 4773 : Part 1 : Section 1.1
BS 4773 : Part 2
BS 5060
BS 5285
BS 5491
BS 6202
BS 6339
BS 6583
BS 6821
BS EN ISO 9097
BS EN 25136
DD ENV 328
BS 1553 : Part 3
BS 1571 : Part 2
BS 2806
BS 5791 : Part 1
BS 5791 : Part 2
similar electrical appliances Particular
requirements Electric fans and regulators
Methods for testing and rating air terminal
devices for air distribution systems -Aerodynamic testing -- Testing under
laboratory conditions
Methods for testing and rating air terminal
devices for air distribution systems -Aerodynamic testing -- Acoustic testing
Specification for performance and
construction of electric circulating fans and
regulators
Specification. Performance of a.c. electric
ventilating fans and regulators for nonindustrial use
Specification for rating and testing unit air
conditioners of above 7 kW cooling
capacity
Glossary of terms for cleaning equipment
for air or other gases
Specification for dimensions of circular
flanges for general purpose industrial fans
Methods for volumetric testing for rating of
fan sections in central station air handling
units (including guidance on rating)
Methods for aerodynamic testing of
dampers and valves
Small craft. Electric fans
Acoustics. Determination of sound power
radiated into a duct by fans. In-duct method
Heat exchangers. Test procedures for
establishing performance of unit air coolers
for refrigeration
Specification for graphical symbols for
general engineering -- Graphical symbols
for compressing plant
Specification for testing of positive
displacement compressors and exhausters - Methods for simplified acceptance testing
for air compressors and exhausters
Specification for limiting dimensions of air
filters for internal combustion engines and
compressors other than for aircraft
Glossary of terms for compressors,
pneumatic tools and machines -- General
Glossary of terms for compressors,
DD ENV 12283
BS 5791 : Part 3
BS 5870
BS 6244
BS 6413 : Part 3 : Section 3.2
BS 6754
BS 7316
BS 7321
BS 7322
BS 3636
BS 5543
BS 5914
BS 5760 : Part 0
BS 6548 : Part 1
BS 6548 : Part 2
BS 6548 : Part 3
pneumatic tools and machines -Compressors
DD ENV 12283 Paper - Printing and
business paper - Determination of toner
adhesion
Glossary of terms for compressors,
pneumatic tools and machines -- Pneumatic
tools and machines
Recommendations for line spacings and
character spacings for office machines and
data processing equipment
Code of practice for stationary air
compressors
Lubricants, industrial oils and related
products (class L) -- Classification for
family D (compressors) -- Gas and
refrigeration compressors
Specifications and testing of compressed
air dryers
Specification for design and construction of
screw and related type compressors for the
process industry
Specification for design and construction of
turbo-type compressors for the process
industry
Specification for design and construction of
reciprocating type compressors for the
process industry
Methods for proving the gas tightness of
vacuum or pressurized plant
Vacuum technology - graphical symbols
Methods of calibrating leak-detectors of the
mass-spectrometer-type used in the field of
vacuum technology
Reliability of systems, equipment and
components -- Introductory guide to
reliability
Maintainability of equipment -- Guide to
specifying and contracting for
maintainability
Maintainability of equipment -- Guide to
maintainability studies during the design
phase
Maintainability of equipment -- Guide to
maintainability, verification and the
collection, analysis and presentation of
BS 6548 : Part 4
BS 6548 : Part 5
BS 6548 : Part 6
BS EN ISO 3952-1
BS EN ISO 3952-2
BS EN ISO 3952-3
BS 7666 : Part 3
BS 5559
BS 3996
BS 4742 : Part 8
BS 5383
BS 6746C
BS 7568 : Part 4
PD 2379
BS EN ISO 6009
BS EN 60073
maintainability data
Maintainability of equipment -- Guide to
the planning of maintenance and
maintenance support
Maintainability of equipment -- Guide to
diagnostic testing
Maintainability of equipment -- Guide to
statistical methods in maintainability
evaluation
Kinematic diagrams. Graphical symbols -Part 1
Kinematic diagrams. Graphical symbols -Part 2
Kinematic diagrams. Graphical symbols -Part 3
Spatial data-sets for geographical
referencing -- Specification for addresses
Specification for identification of
equipment terminals and of terminations of
certain designated conductors, including
general rules for an alphanumeric system
Specification for colour coding for onemark and graduated pipettes (including
requirements for the service performance
of the colour coding enamels)
Hydraulic equipment for agricultural
machinery -- Method for colour coding of
remote hydraulic power services and
controls on agricultural tractors
Specification for material identification of
steel, nickel alloy and titanium alloy tubes
by continuous character marking and
colour coding of steel tubes
Colour chart for insulation and sheath of
electric cables
Press tools -- Compression springs with
rectangular section. Housing dimensions
and colour coding
Register of colours of manufacturers'
identification threads for electric cables and
cords
Specification for Colour coding of
hypodermic needles for single use
Specification for coding of indicating
devices and actuators by colours and
supplementary means
BS 4462
BS 4884 : Part 1
BS 4884 : Part 2
BS 4899:Part 1
BS 5401
BS 6938
BS 7649
BS EN 61082-1
BS EN 61082-2
BS EN 61082-3
BS 7096
BS 7227
BS 7298
BS 7109: Part 3
BS EN ISO 8583
BS EN ISO 10373
Guide for the preparation of technical sales
literature for measuring instruments and
process control equipment
Technical manuals -- Specification for
presentation of essential information
Technical manuals -- Guide to content
Guide to user's requirements for technical
manuals (based on the principles of BS
4884) -- Content
Guide to information content and
presentation of operators' manuals provided
for tractors and machinery for agriculture
and forestry
Recommendations for documentation of
the preparation of certified reference
materials for metallurgical analysis of nonferrous metals
Guide to the design and preparation of
documentation for users of application
software
Preparation of documents used in
electrotechnology -- General requirements
Preparation of documents used in
electrotechnology -- Function-oriented
diagrams
Preparation of documents used in
electrotechnology -- Connection diagrams,
tables and lists
Guide to design and use of bank cards with
a magnetic stripe that employs track 3
Procedures for the application of ISO 7812
to allocate UK Issuer Identification
Numbers (UK IINs) for use on
identification cards
Schedule of requirements and
recommendations for cards to be used in
electronic funds transfer at point of sale
(EFT-POS)
Guide to design and use of identification
cards having integrated circuits with
contacts -- Electronic signals and
transmission protocols
Financial transaction card originated
messages. Interchange message
specifications
Identification cards. Test methods
BS EN ISO 10536-1
BS EN 726-1
BS EN 726-3
BS EN 726-4
BS EN 742
DD ENV 1257-1
DD ENV 1292
DD ENV 1375-1
BS EN 27816-1
BS EN 27816-2
BS EN 29992-1
BS 1945
Identification cards. Contactless integrated
circuit(s) cards -- Physical characteristics
Identification card systems.
Telecommunications. Integrated circuit(s)
cards and terminals -- System overview
Identification card systems.
Telecommunications. Integrated circuit(s)
cards and terminals -- Application
independent card requirements
Identification card systems.
Telecommunications. Integrated circuit(s)
cards and terminals -- Application
independent card related terminal
requirements
Identification cards. ID-1 card. Location of
contacts for cards and devices used in
Europe
Identification card systems. Rules for
personal identification number (PIN)
handling in intersector environments -Specifies the rules for the presentation of
the Personal Identification Number (PIN)
in the intersector environments. -- PIN
presentation
Identification card systems. Integrated
circuit(s) cards and interface services.
Additional test methods
Identification card systems. Intersector
integrated circuit(s) card additional
formats. -- ID-000 card size and physical
characteristics
Guide to design and use of identification
cards having integrated circuits with
contacts -- Physical characteristics
Guide to design and use of identification
cards having integrated circuits with
contacts -- Contact locations and minimum
size
Financial transaction cards. Messages
between the integrated circuit card and the
card accepting device -- Financial
transaction cards. Messages between the
integrated circuit card and the card
accepting device. Concepts and structures
Specification for fireguards for heating
appliances (gas, electric and oil-burning)
BS EN 30202-1
BS 3785
BS 4125
BS 4139
BS 4474
BS 4648
BS 4863
BS 5239
BS 4792
BS 5779
BS 6595
BS 6652
BS 6684
BS 5408
BS 7115: Part 1
BS 7115: Part 2
BS 3138
Financial transaction cards. Security
architecture of financial transaction
systems using integrated circuit cards -Card life cycle
Specification for webbing safety harness
for baby carriages and chairs and walking
reins
Specification for safety requirements for
child safety barriers for domestic use
Specification for safety requirements for
perambulators (baby carriages)
Specification for safety harnesses and
safety lines for use by children in yachts
Specification for safety requirements for
baby walking frames
Specification for safety requirements for
playpens for domestic use
Specification for babies' dummies
Requirements and methods of test for
materials, parking devices, locking devices,
safety harness and/or attachments, stability,
rigidity, wheel security and performance.
Includes recommendations for instructions
on use and maintenance to be supplied by
th
Specification for spray mixing taps
Specification for safety requirements for
baby nests
Specification for packagings resistant to
opening by children
Specification for safety harnesses
(including detachable walking reins) for
restraining children when in perambulators
(baby carriages), pushchairs and high
chairs and when walking
Glossary of documentation terms
Determination of volatile nitrosamines in
rubber teats for feeding bottles and babies'
dummies -- Dichloromethane extraction
method
Determination of volatile nitrosamines in
rubber teats for feeding bottles and babies'
dummies -- Artificial saliva extraction
method
Glossary of terms used in management
services
BS 3811
BS 4335
BS 4778 : Part 2
BS 4778 : Part 3 : Section 3.1
BS 4778 : Part 3 : Section 3.2
BS 5191
BS 7368
BS 7423
BS 7551
BS 7000 : Part 10
BS EN 28317
BS 7802
BS ISO 3534-1
BS ISO 3534-2
DD ENV 1178-1
DD ENV 1178-2
BS 1970
BS 3415
BS 3456 : Part 2 : Section 2.21
BS 3795
BS 3879
BS 4951
Glossary of terms used in terotechnology
Glossary of terms used in project network
techniques
Quality vocabulary -- Quality concepts and
related definitions
Quality vocabulary -- Availability,
reliability and maintainability terms -Guide to concepts and related definitions
Quality vocabulary -- Availability,
reliability and maintainability terms -Glossary of international terms
Glossary of production planning and
control terms
Specification for babies' elastomeric
feeding bottle teats
Specification for safety requirements for
children's travel cots of internal base length
not less than 900 mm
Specification for safety requirements for
carry cots and similar handled products and
stands
Design management systems -- Glossary of
terms used in design management
Child-resistant packaging. Requirements
and testing procedures for reclosable
packages
Glossary of terms used in operational
research
Statistics. Vocabulary and symbols -Probability and general statistical terms
Statistics. Vocabulary and symbols -Statistical quality control
Furniture. Children's high chairs for
domestic use -- Safety requirements
Furniture. Children's high chairs for
domestic use -- Test methods
Specification for rubber hot water bottles
Specification for venetian blinds
Specification for safety of household and
similar electrical appliances Particular
requirements Electric immersion heaters
Specification for matches
Specification for portable appliances
operating at vapour pressure from liquefied
petroleum gas containers
Specification for builders' hardware: lock
BS 6170
BS ISO 3534-3
BS EN ISO 8402
BS 6671
BS 6728 : Part 2
BS 7660
BS 5168
BS EN 60335-2-45
BS EN 60335-2-59
BS 3521 : Part 1
BS 3521 : Part 2
BS 3521 : Part 3
BS 3456 : Part 202 : Section 202.19
BS 4727 : Part 5 : Group 01
BS 3456 : Part 202 : Section 202.20
BS 5283
and latch furniture (doors)
Specification for flax canvas water buckets
Statistics. Vocabulary and symbols -Glossary of terms relating to the design of
experiments
Quality management and quality assurance.
Vocabulary
Specification for thermal packs and drink
coolers
Thermoplastics hot water bottles -Specification for hot water bottles
manufactured from polyolefin materials
Specification for safety pins for general use
Glossary of rheological terms
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Portable electric heating
tools and similar appliances
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Insect killers
Terms relating to ophthalmic lenses and
spectacle frames Glossary of terms relating
to ophthalmic lenses
Terms relating to ophthalmic lenses and
spectacle frames Glossary of terms relating
to spectacle frames
Terms relating to ophthalmic lenses and
spectacle frames Glossary of terms and
symbols relating to contact lenses
Specification for safety of household and
similar electrical appliances Particular
requirements Battery-powered shavers, hair
clippers and similar appliances and their
charging and battery assemblies
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
electromedical equipment -- Radiology and
radiological physics terminology
Specification for safety of household and
similar electrical appliances Particular
requirements Battery-powered toothbrushes and their charging and battery
assemblies
Glossary of terms relating to disinfectants
BS 6324 : Part 1
BS 6324 : Part 2
BS 6324 : Part 3
BS 6324 : Part 4
BS 6324 : Part 5
BS 6641
BS EN 60335-2-8
BS 6937
BS 7126: Part 1
BS 7127: Part 1
BS EN 60335-2-23
BS 7313 : Part 1 : Section 1.1
BS 7313 : Part 1 : Section 1.2
BS EN 60335-2-27
BS 7313 : Part 1 : Section 1.3
BS 7710 : Part 1
BS 7710 : Part 2
BS 7710 : Part 3
Terms relating to surgical implants -Glossary of general medical terms
Terms relating to surgical implants -Glossary of terms relating to mechanics
Terms relating to surgical implants -Glossary of terms relating to materials
Terms relating to surgical implants -Glossary of orthopaedic surgical terms
Terms relating to surgical implants -Guidance on the usage of the terms 'valgus'
and 'varus' in orthopaedic surgery
Glossary of medical radiology terms
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Electric shavers, hair
clippers and similar appliances
Glossary of wheelchair terms
Urine collection bags -- Glossary of terms
Ostomy collection bags -- Glossary of
terms
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Appliances for skin or hair
care
Prosthetics and orthotics -- Terminology -Glossary of general terms relating to
external limb prostheses and external
orthoses
Prosthetics and orthotics -- Terminology -Glossary of terms relating to external limb
prostheses and wearers of external limb
prostheses
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Ultra-violet and infra-red
radiation skin treatment appliances for
household and similar use
Prosthetics and orthotics -- Terminology -Glossary of terms relating to external
orthoses
Urine absorbing aids. Vocabulary -Conditions of urinary incontinence
Urine absorbing aids. Vocabulary -Products
Urine absorbing aids. Vocabulary -Identification of product types
BS EN 60335-2-32
BS EN ISO 1942-5
BS EN 60335-2-52
BS EN 21942-1
BS EN 60335-2-60
BS EN 21942-2
BS EN 21942-3
BS EN 21942-4
BS 4422 : Part 1
BS 4422 : Part 2
BS 4422 : Part 3
BS 4422 : Part 4
BS 4422 : Part 5
BS 4422 : Part 6
BS EN 61254
BS 4422 : Part 7
BS 4422 : Part 9
BS 6068 : Part 1 : Section 1.1
BS 6068 : Part 1 : Section 1.2
BS 6068 : Part 1 : Section 1.3
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Massage appliances
Dental vocabulary -- Terms associated with
testing
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Oral hygiene appliances
connected to the mains supply though a
safety isolating transformer
Dental vocabulary -- General and clinical
terms
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Whirlpool baths and
similar equipment
Dental vocabulary -- Dental materials
Dental vocabulary -- Dental instruments
Dental vocabulary -- Dental equipment
Glossary of terms associated with fire -General terms and phenomena of fire
Glossary of terms associated with fire -Structural fire protection
Glossary of terms associated with fire -Fire detection and alarm
Glossary of terms associated with fire -Fire extinguishing equipment
Glossary of terms associated with fire -Smoke control
Glossary of terms associated with fire -Evacuation and means of escape
Electric shavers for household use.
Methods for measuring the performance
Glossary of terms associated with fire -Explosion detection and suppression means
Glossary of terms associated with fire -Marine terms
Water quality -- Glossary -- Terms relating
to types of water, and treatment and storage
of waste water
Water quality -- Glossary -- Additional
terms relating to types of water, and
treatment and storage of water and waste
water, and terms used in sampling and
analysis of water
Water quality -- Glossary -- An additional
BS 6068 : Part 1 : Section 1.4
BS 6068 : Part 1 : Section 1.5
BS 6068 : Part 1 : Section 1.6
BS 6068 : Part 1 : Section 1.7
BS 6068 : Part 1 : Section 1.8
BS 6069 : Part 2
BS 1711
BS ISO 4880
BS 6826
BS EN 292-1
BS EN 292-2
BS EN 423
BS EN 424
DD ENV 12281
BS EN 425
BS EN 374-1
BS EN 426
BS EN 427
BS EN 428
BS EN 429
90 terms
Water quality -- Glossary -- An additional
18 terms
Water quality -- Glossary -- An additional
49 terms
Water quality -- Glossary -- An additional
42 terms
Water quality -- Glossary -- An additional
47 terms
Water quality -- Glossary -- An additional
66 terms
Characterization of air quality -- Glossary
Specification for solid rubber flooring
Burning behaviour of textiles and textile
products. Vocabulary
Specification for linoleum and cork carpet
sheet and tiles
Safety of machinery. Basic concepts,
general principles for design -- Basic
terminology, methodology
Safety of machinery. Basic concepts,
general principles for design -- Technical
principles and specifications
Resilient floor coverings. Determination of
the effect of stains
Resilient floor coverings. Determination of
the effect of the simulated movement of a
furniture leg
DD ENV 12281 Paper - Printing and
business paper - Requirements for copy
paper for dry toner imaging processes
Resilient floor coverings. Determination of
the effect of a castor chair
Protective gloves against chemicals and
micro-organisms -- Terminology and
performance requirements
Resilient floor coverings. Determination of
width, length, straightness and flatness of
sheet material
Resilient floor coverings. Determination of
the side length, squareness and straightness
of tiles
Resilient floor coverings. Determination of
overall thickness
Resilient floor coverings. Determination of
the thickness of layers
BS EN 614-1
BS EN 430
BS EN 431
BS EN 432
BS EN 433
BS EN 434
BS EN 661
BS EN 662
BS EN 663
DD ENV 12282
BS EN 664
DD ENV 1070
BS EN 665
BS EN 666
BS 3015
BS 3680 : Part 1
BS 3730 : Part 1
BS 4727 : Part 1 : Group 04
BS 4727 : Part 3 : Group 08
Safety of machinery. Ergonomic design
principles -- Terminology and general
principles
Resilient floor coverings. Determination of
mass per unit area
Resilient floor coverings. Determination of
peel resistance
Resilient floor coverings. Determination of
shear force
Resilient floor coverings. Determination of
residual indentation after static loading
Resilient floor coverings. Determination of
dimensional stability and curling after
exposure to heat
Resilient floor coverings. Determination of
the spreading of water
Resilient floor coverings. Determination of
curling on exposure to moisture
Resilient floor coverings. Determination of
conventional pattern depths
DD ENV 12282 Paper - Printing and
business paper - Determination of edge
dust
Resilient floor coverings. Determination of
volatile loss
Safety of machinery. Terminology
Resilient floor coverings. Determination of
exudation of plasticizers
Resilient floor coverings. Determination of
gelling
Glossary of terms relating to mechanical
vibration and shock
Measurement of liquid flow in open
channels -- Glossary of terms
Assessment of departures from roundness - Glossary of roundness measurement
terms
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Measurement terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics --
BS 5233
BS 5698 : Part 1
BS 6741 : Part 1
BS 6741 : Part 2
DD ENV 12282
BS 4211
BS 6808 : Part 1
BS 7553
BS 6897 : Part 1
DD ENV 12448
BS EN 131-1
BS EN 131-2
PD 6461 : Part 1
PD 6461 : Part 2
PD 6461 : Part 3
BS EN 472
BS EN 24006
BS 3683 : Part 1
BS 3683 : Part 2
BS 3683 : Part 3
BS 3683 : Part 4
BS 7410
Acoustics and electroacoustics
Glossary of terms used in metrology
(incorporating BS 2643)
Guide to pulse techniques and apparatus -Pulse terms and definitions
Glossary of surface roughness terms -Surface and its parameters
Glossary of surface roughness terms -Measurement of surface roughness
parameters
DD ENV 12282 Paper - Printing and
business paper - Determination of edge
dust
Specification for ladders for permanent
access to chimneys, other high structures,
silos and bins
Coordinate measuring machines -Glossary of terms
Specification for loft ladders
Experimental determination of mechanical
mobility -- Specification for transducers
DD ENV 12448 Paper - Printing and
business paper - Determination of the
coefficient of static friction
Ladders -- Specification for terms, types,
functional sizes
Ladders -- Specification for requirements,
testing, marking
Vocabulary of metrology -- Basic and
general terms (internationa)
Vocabulary of metrology -- Vocabulary of
legal metrology- fundamental terms
Vocabulary of metrology -- Guide to the
expression of uncertainty in measurement
Pressure gauges. Vocabulary
Measurement of fluid flow in closed
conduits. Vocabulary and symbols
Glossary of terms used in non-destructive
testing -- Penetrant flaw detection
Glossary of terms used in non-destructive
testing -- Magnetic particle flaw detection
Glossary of terms used in non-destructive
testing -- Radiological flaw detection
Glossary of terms used in non-destructive
testing -- Ultrasonic flaw detection
Glossary of terms used in industrial
BS 7694
BS 1877 : Part 10
PD 6532 : Part 1
BS 2005
BS ISO 5725-1
BS 2483
BS 2519 : Part 1
BS 2519 : Part 2
BS 2543
BS 3044
BS 3129
BS 3173
BS 3851
BS 3962 : Part 6
BS 5983 : Part 6
BS 3962 : Part 1
BS 3962 : Part 2
screening
Glossary of terms for test sieves and test
sieving
Domestic bedding -- Pillows and bolsters
for domestic use (excluding cellular rubber
pillows and bolsters) -- Specification for
mattresses and bumpers for children's cots,
perambulators and similar domestic articles
Reference materials. Guide to the contents
of certificates of reference materials -Guide to terms and definitions used in
connection with reference materials
Glossary of terms for fillings for bedding,
upholstery and other domestic articles
Accuracy (trueness and precision) of
measurement methods and results -General principles and definitions
Specification for overbed tables
Glossary for gears -- Geometrical
definitions
Glossary for gears -- Notation
Specification for woven and knitted fabrics
for upholstery
Guide to ergonomics principles in the
design and selection of office furniture
Specification for latex foam rubber
components for furniture
Specification for non-pocketed or open
type spring centre units for domestic
mattresses
Glossary of terms used in the mechanical
balancing of rotating machinery
Methods of test for finishes for wooden
furniture -- Assessment of resistance to
mechanical damage
Metric spherical plain bearings -- Glossary
of terms
Methods of test for finishes for wooden
furniture -- Methods of test for finishes for
wooden furniture Assessment of low angle
glare by measurement of specular gloss at
85ø
Methods of test for finishes for wooden
furniture -- Methods of test for finishes for
wooden furniture Assessment of surface
resistance to wet heat
BS 3962 : Part 3
BS 3962 : Part 4
BS 3962 : Part 5
BS 6040
BS 6107 : Part 1
BS 4438
BS 6528
BS 4723
BS 6560
BS 7776
BS 4875 : Part 1
BS 4875 : Part 2
BS 4875 : Part 3
BS 4875 : Part 4
BS 4875 : Part 5
BS 7780 : Part 2
Methods of test for finishes for wooden
furniture -- Methods of test for finishes for
wooden furniture Assessment of surface
resistance to dry heat
Methods of test for finishes for wooden
furniture -- Methods of test for finishes for
wooden furniture Assessment of surface
resistance to cold liquids
Methods of test for finishes for wooden
furniture -- Methods of test for finishes for
wooden furniture Assessment of surface
resistance to cold oils and fats
Nomenclature for bolts, screws, nuts and
accessories
Rolling bearings : tolerances -- Glossary of
terms
Specification for filing cabinets
andsuspended filing pockets Dimensions of
2, 3 and 4 drawer A4 and foolscap cabinets
and suspended filing pockets.
Includesrequirements and tests for drawers
and drawerfittings, for the rigidity of
carcases and forsafety.
Glossary of terms for cylindrical screw
threads
Specification for stretch covers for
upholstered furniture
Glossary of terms for rolling bearings
Glossary of torque terminology for
threaded fasteners
Strength and stability of furniture -Methods for determination of strength of
chairs and stools
Strength and stability of furniture -Methods for determination of stability of
chairs and stools
Strength and stability of furniture -Methods for determination of strength of
settees
Strength and stability of furniture -Methods for determination of stability of
settees
Strength and stability of furniture -Methods for determination of strength of
tables and trolleys
Specification for rotary shaft lip type seals
BS 4875 : Part 6
BS 4875 : Part 7
BS 4875 : Part 8
BS 7848
BS 5127
BS 5459 : Part 1
BS 5459 : Part 2
BS 5459 : Part 3
BS 5790 : Part 1
DD ENV 12448
BS 5790 : Part 2
BS 5791 : Part 1
BS 5799
BS 5791 : Part 2
BS 5852
BS 6023
BS 5873 : Part 1
-- Vocabulary
Strength and stability of furniture -Methods for determination of stability of
tables and trolleys
Strength and stability of furniture -Methods for determination of strength of
storage furniture
Strength and stability of furniture -Methods for determination of stability of
storage furniture
Gears. Wear and damage to gear teeth.
Terminology
Specification for polyolefin webbing for
divans and bed bases
Specification for performance requirements
and tests for office furniture -- Desks and
tables
Specification for performance requirements
and tests for office furniture -- Office
seating
Specification for performance requirements
and tests for office furniture -- Storage
furniture
Coated fabrics for upholstery -Specification for PVC-coated knitted
fabrics
DD ENV 12448 Paper - Printing and
business paper - Determination of the
coefficient of static friction
Coated fabrics for upholstery -Specification for PVC coated woven
fabrics
Glossary of terms for compressors,
pneumatic tools and machines -- General
Specification for safety requirements for
children's high chairs and multi-purpose
high chairs for domestic use
Glossary of terms for compressors,
pneumatic tools and machines -Compressors
Methods of test for assessment of the
ignitability of upholstered seating by
smouldering and flaming ignition sources
Glossary of technical terms for automatic
steam traps
Educational furniture -- Specification for
BS 6202
BS 5873 : Part 2
BS 5873 : Part 3
BS 5873 : Part 4
BS EN 736-1
BS 5910 : Part 1
BS EN 764
BS 5940 : Part 1
BS 6250 : Part 1
BS 6250 : Part 2
BS 6250 : Part 3
BS 6250 : Part 4
BS 6261
BS 6396
BS 499 : Part 1 : Supplement
BS 6608
BS 949 : Part 5
functional dimensions, identification and
finish of chairs and tables for educational
institutions
Glossary of terms for cleaning equipment
for air or other gases
Educational furniture -- Specification for
strength and stability of chairs for
educational institutions
Educational furniture -- Specification for
strength and stability of tables for
educational institutions
Educational furniture -- Specification for
strength and stability of storage furniture
for educational institutions
Valves. Terminology -- Definition of types
of valves
Methods of test for surface finishes for
furniture -- Assessment of surface
resistance to cold liquids
Pressure equipment. Terminology and
symbols. Pressure, temperature, volume
Office furniture -- Specification for design
and dimensions of office workstations,
desks, tables and chairs
Domestic and contract furniture -Specification for performance requirements
for seating
Domestic and contract furniture -Specification for performance requirements
for tables and trolleys
Domestic and contract furniture -Specification for performance requirements
for cabinet furniture
Domestic and contract furniture -- Guide to
the provision of information
Method for evaluating the application of
and interaction between components in
upholstered furniture
Specification for electrical systems in
office furniture and office screens
Welding terms and symbols -- Supplement.
Definitions for electric welding equipment
Specification for cattle hide leathers for
upholstered furniture
Screwing taps -- Nomenclature and
terminology
BS 7176
BS 1127 : Part 4
BS 7376
BS 7377
BS 7397
DD ENV 12226
BS 7495
BS 7558
BS 7646
BS EN 597-1
BS EN 597-2
BS EN 747-1
DD ENV 12225
BS EN 1021-2
BS EN 1129-1
BS EN 1129-2
DD ENV 1178-1
DD ENV 1178-2
BS 1296 : Part 2
BS 1523 : Part 1
Specification for resistance to ignition of
upholstered furniture for non-domestic
seating by testing composites
Screwing dies and dienuts -- Terminology
for circular screwing dies
Specification for inclusion of glass in the
construction of tables or trolleys
Specification for step stools
Methods of test for mattresses, bed bases
and bed sets
DD ENV 12226 Geotextiles and geotextilerelated products - General tests for
evaluation following durability testing
Specification for safety requirements for
children's table-mounted chairs for
domestic use
Specification for gun cabinets
Specification for general purpose selfservice trolleys
Furniture. Assessment of the ignitability of
matresses and upholstered bed bases -Ignition source : smouldering cigarette
Furniture. Assessment of the ignitability of
matresses and upholstered bed bases -Ignition source : match flame equivalent
Furniture. Bunk beds for domestic use -Safety requirements
DD ENV 12225 Geotextiles and geotextilerelated products - Method for determining
the microbiological resistance by a soil
burial test
Furniture. Assessment of the ignitability of
upholstered furniture -- Ignition source :
match flame equivalent
Furniture. Foldaway beds. Safety
requirements and testing -- Safety
requirements
Furniture. Foldaway beds. Safety
requirements and testing -- Test methods
Furniture. Children's high chairs for
domestic use -- Safety requirements
Furniture. Children's high chairs for
domestic use -- Test methods
Specification for single point cutting tools - Nomenclature
Glossary of terms used in automatic
BS 3087 : Part 2
BS 4184
BS 4642
BS 6101 : Part 3
BS 3053
BS 6416
BS 7086
BS 7568 : Part 1
BS EN 441-1
BS EN 441-10
BS ISO 2806
BS EN 441-11
BS EN 441-2
BS EN 441-3
BS EN 441-4
BS EN 441-6
BS EN 441-7
BS EN 441-8
BS EN 441-9
BS EN 657
BS 3456 : Part 2 : Section 2.22
BS 3456 : Part 2 : Section 2.26
controlling and regulating systems -Process and kinetic control
Pliers and nippers -- Nomenclature
Glossary for power presses, open front
mechanical type
Glossary of industrial furnace terms
Machine tool ball screws -- Glossary of
terms
Specification for commercial refrigerated
cabinets for the sale and/or display of food
products
Nomenclature for assembly tools for
screws and nuts
Glossary of terms for pneumatic tools
Press tools -- Punches. Nomenclature and
terminology
Refrigerated display cabinets -- Terms and
definitions
Test for absence of odour and taste
Industrial automation systems. Numerical
control of machines. Vocabulary
Refrigerated display cabinets -Installation, maintenance and user's guide
Refrigerated display cabinets -- General
mechanical and physical requirements
Refrigerated display cabinets -- Linear
dimensions, areas and volumes
Refrigerated display cabinets -- General
test conditions
Refrigerated display cabinets -Classification according to temperature
Refrigerated display cabinets -- Defrosting
test
Refrigerated display cabinets -- Water
vapour condensation test
Refrigerated display cabinets -- Electrical
energy consumption test
Thermal spraying. Terminology,
classification
Specification for safety of household and
similar electrical appliances Particular
requirements Electricaire heaters
Specification for safety of household and
similar electrical appliances Particular
requirements Thermal-storage electric
room heaters
BS 1846 : Part 1
BS 1846 : Part 2
CP 1018
BS 3455
BS 4485: Part 1
BS EN 60240-1
BS 5676
BS 7016 : Part 1
BS 7016 : Part 2
BS 7016 : Part 5
BS 7016 : Part 6
BS 7016 : Part 8
BS EN ISO 9251
BS 7016 : Part 3
BS 7016 : Part 4
BS EN 60299
BS 4727 : Part 1 : Group 01
Glossary of terms relating to solid fuel
burning equipment -- Domestic appliances
Glossary of terms relating to solid fuel
burning equipment -- Industrial water
heating and steam raising installations
Electric floorwarming systems for use with
off-peak and similar supplies of electricity
Glossary of terms used in nuclear science
and technology
Water cooling towers -- Glossary of terms
Characteristics of electric infra-red emitters
for industrial heating -- Short wave infrared emitters
Vocabulary for reciprocating internal
combustion engines
Components and systems of reciprocating
internal combustion engines -- Glossary of
terms for structure and external covers
Components and systems of reciprocating
internal combustion engines -- Glossary of
terms for main running gear
Components and systems of reciprocating
internal combustion engines -- Glossary of
terms for cooling systems
Components and systems of reciprocating
internal combustion engines -- Glossary of
terms for lubricating systems
Components and systems of reciprocating
internal combustion engines -- Glossary of
terms for starting systems
Thermal insulation. Heat transfer.
Conditions and properties of materials.
Vocabulary
Components and systems of reciprocating
internal combustion engines -- Glossary of
terms for valves, camshaft drive and
actuating mechanisms
Components and systems of reciprocating
internal combustion engines -- Glossary of
terms for pressure charging and air/exhaust
gas ducting systems
Household electric blankets. Methods for
measuring performance
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
BS 4727 : Part 1 : Group 02
BS 4727 : Part 1 : Group 03
BS 4727 : Part 1 : Group 05
BS 4727 : Part 1 : Group 06
BS 4727 : Part 1 : Group 07
BS 4727 : Part 1 : Group 08
BS 4727 : Part 1 : Group 09
BS 4727 : Part 1 : Group 10
BS 4727 : Part 1 : Group 11
power, telecommunications and electronics
-- Fundamental terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Electrical and magnetic devices
terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Relay terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Semiconductor terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Electronic tube terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Magnetic materials and components
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Piezoelectric devices for frequency
control and selection
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Electromagnetic compatibility
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Insulating solids, liquids and gases
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
BS 4727 : Part 1 : Group 12
PAS 019
BS EN 60675
BS EN 61255
BS 4727 : Part 1 : Group 13
BS 4727 : Part 2 : Group 02
BS 4727 : Part 2 : Group 03
BS 4727 : Part 2 : Group 04
BS 4727 : Part 2 : Group 05
BS 4727 : Part 2 : Group 06
and colour terms -- Terms common to
power, telecommunications and electronics
-- Printed circuits
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Insulators
PAS 019 Telephones
Household electric direct-acting room
heaters. Methods for measuring
performance
Household electric heating pads. Methods
for measuring performance
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Electromechanical components for
electronic equipment
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Power electronics
terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Rotating machinery
terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Power transformers
and reactors
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Voltage fluctuation
terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Switchgear and
controlgear terminology (including fuse
terminology)
BS 4727 : Part 2 : Group 07
BS 4727 : Part 2 : Group 08
BS 4727 : Part 2 : Group 09
BS 4727 : Part 2 : Group 10
BS 4727 : Part 2 : Group 11
BS 4727 : Part 2 : Group 12
BS 4727 : Part 2 : Group 13
BS 7728
BS 5817 : Part 2
BS 6513 : Part 1
BS 6840 : Part 2
BS 7404 : Part 1 : Section 1.3
DD ENV 1170-8
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Tariffs terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Electric cables
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Transductor
terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Industrial
electroheating terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Generation,
transmission and distribution of electricity
terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Telecontrol
terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Electrical apparatus
for explosive atmospheres
Mechanical structures for electronic
equipment. Terminology
Specification for audiovisual, video and
television equipment and systems -Definitions
Wideband cabled distribution systems -Glossary of terms
Sound system equipment -- Glossary of
general terms and calculation methods
Telecontrol equipment and systems -General considerations -- Glossary
DD ENV 1170-8 Test method for Glass-
BS 4727 : Part 2 : Group 14
BS 4727 : Part 2 : Group 15
BS 4727 : Part 2 : Group 16
BS 4727 : Part 2 : Group 17
BS 4727 : Part 2 : Group 18
BS 4727 : Part 3 : Group 02
BS 4727 : Part 3 : Group 03
BS 4727 : Part 3 : Group 05
BS 4727 : Part 3 : Group 06
BS EN 60704-2-2
fibre reinforced cement - Part 8 : Cyclic
weathering type test
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Power capacitors
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Overhead lines
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Instrument
transformers
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Secondary cells and
batteries
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Electric traction
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Telephony
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Telegraphy, facsimile and data
communication
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Propagation and media terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Radio location and navigation terminology
Test code for the determination of airborne
BS EN 60704-2-5
BS 4727 : Part 3 : Group 07
BS 4727 : Part 3 : Group 09
BS 5664 : Part 1
BS EN 60641-1
BS EN 60819-1
BS 4727 : Part 3 : Group 10
BS 4727 : Part 3 : Group 11
BS 4727 : Part 3 : Group 12
BS 4727 : Part 3 : Group 13
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Forced draught convection
heaters
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Room heaters of the
storage type
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Radiocommunication terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Transmission lines and waveguides
Solventless polymerisable resinous
compounds used for electrical insulation -Definitions and general requirements
Specification for pressboard and presspaper
for electrical purposes -- Definitions and
general requirements
Non-cellulosic papers for electrical
purposes -- Definitions and general
requirements
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Recording and reproduction of sound all
video terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Space radiocommunications terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Telecommunications, channels and
networks
Glossary of electrotechnical, power,
BS 4727 : Part 3 : Group 14
BS 4727 : Part 3 : Group 15
BS 4727 : Part 3 : Group 16
BS 4727 : Part 3 : Group 17
BS 5406 : Part 1
BS EN 60893-1
BS EN 61120-4
BS 2481 : Part 4
BS 3738 : Part 1
BS 5478 : Part 4
BS 6191 : Part 1
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Optical fibre communication
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Oscillations, signals and related devices
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Antennas
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Switching and signalling in
telecommunications
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Transmission
Disturbances in supply systems caused by
household appliances and similar electrical
equipment -- Disturbances in supply
systems caused by household appliances
and similar electrical equipment. Glossary
of terms
Specification for industrial rigid laminated
sheets based on thermosetting resins for
electrical purposes -- Definitions,
designations and general requirements
Digital audio tape recorder reel to reel
system, using 6, 3 mm magnetic tape, for
professional use -- Magnetic tape
properties : definitions and methods of
measurement
Typewriters -- Glossary of terms
Dictation equipment -- Glossary of terms
Calculators and adding machines -Glossary of terms for calculators
Mail processing machines -- Glossary of
terms for letter opening machines
BS 6191 : Part 2
BS 6191 : Part 3
BS 6191 : Part 5
BS 188
BS 718
BS 7238
BS 733 : Part 1
BS 733 : Part 2
DD 179
BS 734 : Part 1
BS ISO 2382-10
BS ISO 2382-11
BS ISO 2382-12
BS ISO 2382-13
BS ISO 2382-14
BS ISO 2382-15
BS ISO 2382-16
BS ISO 2382-18
BS ISO 2382-19
BS ISO 2382-2
BS ISO 2382-22
BS ISO 2382-3
BS ISO 2382-4
BS 1887
Mail processing machines -- Glossary of
terms for letter folding machines
Mail processing machines -- Glossary of
terms for addressing machines
Mail processing machines -- Glossary of
terms for document inserting machines
Methods for determination of the viscosity
of liquids
Specification for density hydrometers
Glossary for terminology related to
microprocessors
Pyknometers -- Specification
Pyknometers -- Methods for calibration and
use of pyknometers
Glossary of terms used in computerassisted publishing (ISO/TR 9544 : 1988)
Measurement of the density of milk using a
hydrometer -- Specification for
hydrometers for use in milk
Information technology. Vocabulary -Operating techniques and facilities
Information technology. Vocabulary -Processing units
Information technology. Vocabulary -Peripheral equipment
Information technology. Vocabulary -Computer graphics
Information technology. Vocabulary -Reliability, maintenance and availability
Information technology. Vocabulary -Programming languages
Information technology. Vocabulary -Information theory
Information technology. Vocabulary -Distributed data processing
Information technology. Vocabulary -Analog computing
Information technology. Vocabulary -Arithmetic and logic operations
Information technology. Vocabulary -Calculators
Information technology. Vocabulary -Equipment technology
Information technology. Vocabulary -Organization of data
Specification for person weighing
BS ISO 2382-5
BS ISO 2382-6
BS ISO 2382-8
BS 1922
BS ISO 2382-9
BS 2701
BS 3221 : Part 7
BS 3405
BS 4277
BS 5109
BS 5479 : Part 3
BS 5479 : Part 4
BS 5540 : Part 2
BS 7834
BS 6054 : Part 3
BS 6054 : Part 4
BS 6054 : Part 5
BS ISO 4246
BS ISO 5989
machines and height-measuring equipment
for hospitals, welfare and health services
Information technology. Vocabulary -Representation of data
Information technology. Vocabulary -Preparation and handling of data
Information technology. Vocabulary -Control, integrity and security
Specification for glass dispensing measures
for pharmaceutical purposes
Information technology. Vocabulary -Data communication
Specification for Rees-Hugill powder
density flask
Medicine measures -- Specification for oral
syringes delivering doses of less than 5 mL
Method for measurement of particulate
emission including grit and dust (simplified
method)
Glossary of terms used in offset
lithographic printing
Glossary of terms used in assessing the
performance of optical devices and systems
Duplicators and document copying
machines -- Glossary of terms for
duplicators
Duplicators and document copying
machines -- Glossary of terms for
document copying machines
Evaluating particulate contamination of
hydraulic fluids -- Method of calibrating
liquid automatic particle-count instruments
(using AC Fine Test Dust contaminant)
Specification for turbine meters used for
the measurement of gas flow in closed
conduits
Glossary of terms for micrographics -Film processing
Glossary of terms for micrographics -Materials and packaging
Glossary of terms for micrographics -Quality of images, legibility, inspection
Cinematography. Vocabulary
Photography. Pre-packaged chemicals for
the processing of silver halide based
photographic materials. Vocabulary
BS ISO 6196-1
BS ISO 6196-2
BS ISO 6196-6
BS ISO 6196-7
BS ISO 9334
BS 5698 : Part 1
BS EN 28653
PAS 015
PAS 015
BS 6102 : Part 4
BS 4613 : Part 1
BS 4613 : Part 2
BS 4613 : Part 3
BS 6174
PD 12349
DD ENV 635-4
BS EN 27418
BS 6897 : Part 1
DD 2
BS 3810 : Part 9
DD ENV 843-5
Micrographics. Vocabulary -- General
terms
Micrographics. Vocabulary -- Image
positions and methods of recording
Micrographics. Vocabulary -- Equipment
Micrographics. Vocabulary -- Computer
micrographics
Optics and optical instruments. Optical
transfer function. Definitions and
mathematical relationships
Guide to pulse techniques and apparatus -Pulse terms and definitions
Jewellery. Ring-sizes. Definition,
measurement and designation
PAS 015 Product Approval Specification Helmets for equestrian use
PAS 015 Product Approval Specification Helmets for equestrian use
Cycles -- Glossary of terms
Specification for tyre pressure gauges -Indicating plunger portable type
Specification for tyre pressure gauges -Dial portable type
Specification for tyre pressure gauges -Inflation gauges for road vehicles
Specification for differential pressure
transmitters with electrical outputs
PD 12349 Mechanical vibration - Guide to
the health effects of vibration on the human
body
DD ENV 635-4 Plywood - Classification
by surface appearance - Part 4 : Parameters
of ability for finishing - Guideline
Leisure accommodation vehicles.
Vocabulary
Experimental determination of mechanical
mobility -- Specification for transducers
Dynamic force calibration of axial load
fatigue testing machines by means of a
strain gauge technique
Glossary of terms used in materials
handling -- Terms used in connection with
rail transport
DD ENV 843-5 Advanced technical
ceramics - Monolithic ceramics Mechanical tests at room temperature - Part
BS EN 472
BS 7465
BS 7473
BS EN 45501
DD ENV ISO 14825
BS 7118: Part 1
BS 185 : Index
DD ENV 12314-1
DD ENV 12315-2
BS EN ISO 11105
BS EN ISO 11806
BS 1042 : Part 1 : Section 1.4
BS 1042 : Part 1 : Section 1.6
PAS 020
DD ENV 955-4
5 : Statistical analysis
Pressure gauges. Vocabulary
Glossary of terms for ships windows and
side scuttles
Glossary of terms for dredgers
Specification for metrological aspects of
non-automatic weighing instruments
DD ENV ISO 14825 Geographic data files
Measurement of fluid flow: assessment of
uncertainty in the calibration and use of
flow measurement devices -- Linear
calibration relationships
Glossary of aeronautical and astronautical
terms -- Alphabetical index
DD ENV 12314-1 Road Transport and
Traffic Telematics - Automatic vehicle and
equipment identification - Part 1 :
Reference Architectures and Terminology
DD ENV 12315-2 Traffic and Traveller
Information - (TTI) - TTI Messages via
Dedicated Short-Range Communication Part 1 : Data Specification - Uplink
(Vehicle to Roadside)
BS EN ISO 11105 Small craft - Ventilation
of petrol engine and/or petrol tank
compartments
BS EN ISO 11806 Agricultural and
forestry machinery - Portable hand-held
combustion engine driven brush cutters and
grass trimmers - Safety
Measurement of fluid flow in closed
conduits -- Pressure differential devices -Guide to the use of devices specified in
Sections 1.1 and 1.2
Measurement of fluid flow in closed
conduits -- Pressure differential devices -Method of measurement of pulsating fluid
flow in a pipe, by means of orifice plates,
nozzles or Venturi tubes
PAS 020 Specification for Audible
personal attack alarms
DD ENV 955-4 Chemical analysis of
refractory products - Part 4 : Products
containing silica and/or alumina (Analysis
by Flame Atomic Absorption Spectrometry
(FAAS) and Inductively Coupled Plasma
BS 1042 : Part 2 : Section 2.1
BS 185 : Section 1
BS 185 : Section 10
BS 185 : Section 13
BS 185 : Section 14
PD 6611
BS 1042 : Part 2 : Section 2.2
BS 1042 : Part 2 : Section 2.3
PD 6611
BS 185 : Section 15
BS 185 : Section 16
BS 185 : Section 17
BS 185 : Section 18
BS 185 : Section 2
BS 185 : Section 3
BS 185 : Section 4
BS 185 : Section 5
BS 185 : Section 6
Atomic Emission Spectrography (ICP))
Measurement of fluid flow in closed
conduits -- Velocity area methods -Method using Pitot static tubes
Glossary of aeronautical and astronautical
terms -- General
Glossary of aeronautical and astronautical
terms -- Auxiliary services
Glossary of aeronautical and astronautical
terms -- Air-traffic and ground services
Glossary of aeronautical and astronautical
terms -- Radiocommunication and
radiolocation
PD 6611 Ventilation for buildings Symbols and terminology
Measurement of fluid flow in closed
conduits -- Velocity area methods -Method of measurement of velocity at one
point of a conduit of circular cross section
Measurement of fluid flow in closed
conduits -- Velocity area methods -Methods of flow measurement in swirling
or asymmetric flow conditions in circular
ducts by means of current-meters or Pitot
static tubes
PD 6611 Ventilation for buildings Symbols and terminology
Glossary of aeronautical and astronautical
terms -- Meteorology
Glossary of aeronautical and astronautical
terms -- Personnel
Glossary of aeronautical and astronautical
terms -- Aerospace medicine
Glossary of aeronautical and astronautical
terms -- Astronautics
Glossary of aeronautical and astronautical
terms -- Motion of aircraft
Glossary of aeronautical and astronautical
terms -- Structures
Glossary of aeronautical and astronautical
terms -- Aerodynamics
Glossary of aeronautical and astronautical
terms -- Heavier-than-air aircraft
(aerodynes)
Glossary of aeronautical and astronautical
terms -- Ballistic and guided missiles
BS 3680 : Part 11A
BS 185 : Section 7
BS 185 : Section 8
BS 185 : Section 9
BS 3680 : Part 11B
BS 5728 : Part 1
BS 5728 : Part 2 : Supplement No. 1
BS 5728 : Part 6
BS 7405
BS EN 24006
BS EN 24185
BS 5728 : Part 3
PD 6611
PD 6532 : Part 5
PAS 018
DD ENV 50230
DD ENV 50231
Measurement of liquid flow in open
channels -- Free surface flow in closed
conduits -- Methods of measurement
Glossary of aeronautical and astronautical
terms -- Lighter-than-air aircraft (aerostats)
Glossary of aeronautical and astronautical
terms -- Power plant
Glossary of aeronautical and astronautical
terms -- Propellers
Measurement of liquid flow in open
channels -- Free surface flow in closed
conduits -- Specification for performance
and installation of equipment for
measurement of free surface flow in closed
conduits
Measurement of flow of cold potable water
in closed conduits -- Specification for
single meters
Measurement of flow of cold potable water
in closed conduits -- Parallel and multiple
meter operation
Measurement of flow of cold potable water
in closed conduits -- Test methods for
combination meters
Guide to selection and application of
flowmeters for the measurement of fluid
flow in closed conduits
Measurement of fluid flow in closed
conduits. Vocabulary and symbols
Measurement of fluid flow in closed
conduits. Weighing method
Measurement of flow of cold potable water
in closed conduits -- Methods for
determining principal characteristics of
single meters (including test equipment)
PD 6611 Ventilation for buildings Symbols and terminology
PD 6532 : Part 5 Reference materials - Part
5 : Quality system guidelines for the
production of reference materials
PAS 018 Specification for Children's
playground equipment
DD ENV 50230 Aeronautical ground
lighting electrical installation - Control and
monitoring systems : General requirements
DD ENV 50231 Aeronautical ground
BS 6199 : Part 1 : Section 1.2
DD ENV 50232
DD ENV 50234
DD ENV 50235
BS 6356 : Part 10
DD ENV 1402-2
BS 1523 : Part 1
DD ENV 1257-3
DD 203 : Part 1
DD 203 : Part 2
BS ISO 10303-101
DD ENV ISO 14904
DD ENV ISO 14904
lighting electrical installation - Constant
current regulator : Equipment
specifications and tests
Measurement of liquid flow in closed
conduits using weighing and volumetric
methods -- Weighing method -- Procedures
for checking static weighing systems
DD ENV 50232 Aeronautical ground
lighting electrical installation - Isolating
transformer : Equipment specifications and
tests
DD ENV 50234 Aeronautical ground
lighting electrical installation - Flashing
lights : Equipment specifications and tests
DD ENV 50235 Aeronautical ground
lighting electrical installation - Signs :
Equipment specifications and tests
BS 6356 : Part 10 Spraying equipment for
crop protection - Part 10 : Test method for
volume/hectare adjustment systems of
agricultural hydraulic pressure sprayers
DD ENV 1402-2 Unshaped refractory
products - Part 2 : Sampling for testing
Glossary of terms used in automatic
controlling and regulating systems -Process and kinetic control
DD ENV 1257-3 Identification card
systems - Rules for Personal Identification
Number handling in intersector
environments - Part 3 : PIN verification
Industrial automation : shop floor
production -- Reference model for
standardization and a methodology for
identification of requirements
Industrial automation : shop floor
production -- Application of the reference
model for standardization and methodology
Industrial automation systems and
integration. Product data representation and
exchange -- Integrated application
resources : Draughting
DD ENV ISO 14904 Road transport and
traffic telematics - Automatic fee collection
(AFC) - Interface specification for clearing
between operators
DD ENV ISO 14904 Road transport and
BS ISO 10303-201
BS ISO 10303-21
BS ISO 10303-31
BS ISO 10303-42
BS ISO 10303-43
BS ISO 10303-44
BS ISO 10303-46
BS 3680 : Part 1
BS 3680 : Part 10B
DD ENV ISO 14904
BS 3680 : Part 10E
BS 3680 : Part 2A
traffic telematics - Automatic fee collection
(AFC) - Interface specification for clearing
between operators
Industrial automation systems and
integration. Product data representation and
exchange -- Application protocol : Explicit
draughting
Industrial automation systems and
integration. Product data representation and
exchange -- Implementation methods.
Clear text encoding of the exchange
structure
Industrial automation systems and
integration. Product data representation and
exchange -- Conformance testing
methodology and framework : general
concepts
Industrial automation systems and
integration. Product data representation and
exchange -- Integrated generic resources.
Geometric and topological representation
Industrial automation systems and
integration. Product data representation and
exchange -- Integrated generic resources :
Representation structures
Industrial automation systems and
integration. Product data representation and
exchange -- Integrated generic resources :
Product structure configuration
Industrial automation systems and
integration. Product data representation and
exchange -- Integrated generic resources :
visual presentation
Measurement of liquid flow in open
channels -- Glossary of terms
Measurement of liquid flow in open
channels -- Sediment transport -Measurement of suspended sediment
DD ENV ISO 14904 Road transport and
traffic telematics - Automatic fee collection
(AFC) - Interface specification for clearing
between operators
Measurement of liquid flow in open
channels -- Sediment transport -- Sampling
and analysis of gravel bed material
Measurement of liquid flow in open
BS 3680 : Part 2B
BS 3680 : Part 2C
BS 3680 : Part 2D
BS 3680 : Part 3A
BS 3680 : Part 3C
BS 3680 : Part 3E
BS ISO 4602
BS EN 60249-2-17
BS EN 61184
BS 3680 : Part 3G
BS 3680 : Part 3H
BS EN 60335-2-98
BS EN 60335-2-53
channels -- Dilution methods -- General
Measurement of liquid flow in open
channels -- Dilution methods -- Methods of
measurement using radioactive tracers
Measurement of liquid flow in open
channels -- Dilution methods -- Methods of
measurement using chemical tracers
Measurement of liquid flow in open
channels -- Dilution methods -- Methods of
measurement using fluorescent tracers
Measurement of liquid flow in open
channels -- Stream flow measurement -Velocity-area methods
Measurement of liquid flow in open
channels -- Stream flow measurement -Methods for determination of the stagedischarge relation
Measurement of liquid flow in open
channels -- Stream flow measurement -Measurement of discharge by the ultrasonic
(acoustic) method
BS ISO 4602 Reinforcements - Woven
fabrics - Determination of number of yarns
per unit length of warp and weft
BS EN 60249-2-17 Base materials for
printed circuits - Part 2 : Specifications Specification No. 17. Thin polyimide
woven glass fabric copper-clad laminated
sheet of defined flammability for use in the
fabrication of multilayer printed boards
BS EN 61184 Bayonet lampholders
Measurement of liquid flow in open
channels -- Stream flow measurement -General guidelines for the selection of
methods
Measurement of liquid flow in open
channels -- Stream flow measurement -Electromagnetic method using a fullchannel-width coil
BS EN 60335-2-98 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.98 :
Humidifiers
BS EN 60335-2-53 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.53 :
BS EN 60335-2-90
BS EN 60335-2-80
BS 3680 : Part 3Q
BS 3680 : Part 4A
BS 3680 : Part 4C
BS EN ISO 14630
BS 7164-32.1
BS 3680 : Part 5
BS 3680 : Part 6
BS 3680 : Part 7
BS 3680 : Part 8D
BS 3680 : Part 8F
BS 7164-32.1
BS ISO 10012-2
Sauna heating appliances
BS EN 60335-2-90 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.90 :
Commercial microwave ovens
BS EN 60335-2-80 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.80 :
Fans
Measurement of liquid flow in open
channels -- Stream flow measurement -Code of practice for safe practice in stream
gauging
Measurement of liquid flow in open
channels -- Weirs and flumes -- Method
using thin-plate weirs
Measurement of liquid flow in open
channels -- Weirs and flumes -- Flumes
BS EN ISO 14630 General requirements
for non-active surgical implants
BS 7164-32.1 Chemical tests for raw and
vulcanized rubber - Part 32 : Methods for
determination of accelerators - Section 32.1
: Gas and thin layer chromatography
Measurement of liquid flow in open
channels -- Slope area method of
estimation
Measurement of liquid flow in open
channels -- Guide to measurement of flow
in tidal channels
Measurement of liquid flow in open
channels -- The measurement of liquid
level (stage)
Measurement of liquid flow in open
channels -- Measuring instruments and
equipment -- Cableway system for stream
gauging
Measurement of liquid flow in open
channels -- Measuring instruments and
equipment -- Hydrometric data
transmission systems : general
BS 7164-32.1 Chemical tests for raw and
vulcanized rubber - Part 32 : Methods for
determination of accelerators - Section 32.1
: Gas and thin layer chromatography
BS ISO 10012-2 Quality assurance for
BS EN 61010-2-043
BS EN 61010-2-043
BS 3680 : Part 8B
BS 3680 : Part 8C
DD ENV 12648
DD ENV 12647
BS 3680 : Part 8G
BS 3680 : Part 8H
BS 3680 : Part 9A
BS 3680 : Part 9B
measuring equipment - Part 2 : Guidelines
for control of measurement processes
BS EN 61010-2-043 Safety requirements
for electrical equipment for measurement,
control and laboratory use - Part 2-043 :
Particular requirements for dry heat
sterilizers using either hot air or hot inert
gas for the treatment of medical materials,
and fo
BS EN 61010-2-043 Safety requirements
for electrical equipment for measurement,
control and laboratory use - Part 2-043 :
Particular requirements for dry heat
sterilizers using either hot air or hot inert
gas for the treatment of medical materials,
and fo
Measurement of liquid flow in open
channels -- Measuring instruments and
equipment -- Recommendations for direct
depth sounding and suspension equipment
Measurement of liquid flow in open
channels -- Measuring instruments and
equipment -- Calibration of rotatingelement current-meters in straight open
tanks
DD ENV 12648 Bar coding - Test
specifications for bar code printers
DD ENV 12647 Bar coding - Test
specifications for bar code verifiers
Measurement of liquid flow in open
channels -- Measuring instruments and
equipment -- Specification for system
requirements for hydrometric telemetry
systems
Measurement of liquid flow in open
channels -- Measuring instruments and
equipment -- Method of specifying the
performance of hydrometric equipment
Measurement of liquid flow in open
channels -- Water level instruments -Specification for the installation and
performance of pressure actuated liquid
level measuring equipment
Measurement of liquid flow in open
channels -- Water level instruments -Float-operated water level recorders
BS 3045
BS 4196 : Part 0
BS 4196 : Part 1
BS 4196 : Part 8
BS 4198
BS 5775 : Part 7
BS 5782
BS 4196 : Part 2
BS 5110:Part 2
DD ENV 12646
BS 7445 : Part 1
BS ISO 2806
BS 7445 : Part 2
BS 7445 : Part 3
BS ISO/IEC 15506
(mechanical and electromechanical)
Method of expression of physical and
subjective magnitudes of sound or noise in
air
Sound power levels of noise sources -Guide for the use of basic standards and for
the preparation of noise test codes
Sound power levels of noise sources -Precision methods for determination of
sound power levels for broad-band sources
in reverberation rooms
Sound power levels of noise sources -Specification for the performance and
calibration of reference sound sources
Method for calculating loudness
Specification for quantities, units and
symbols -- Acoustics
Specification for interface between
numerical controls and industrial machines
Sound power levels of noise sources -Precision methods for determination of
sound power levels for discrete-frequency
and narrow-band sources in reverberation
rooms
Specification for programming languages
for the numerical control of machines -Minor elements of 2000-type records (postprocessor commands)
DD ENV 12646 Bar coding - Test
specifications for bar code scanners and
decoders
Description and measurement of
environmental noise -- Guide to quantities
and procedures
Industrial automation systems. Numerical
control of machines. Vocabulary
Description and measurement of
environmental noise -- Guide to the
acquisition of data pertinent to land use
Description and measurement of
environmental noise -- Guide to application
to noise limits
BS ISO/IEC 15506 Information technology
- Private Integrated Services Network
(PISN) - Inter-exchange signalling protocol
- Message Waiting Indication
BS ISO/IEC 15505
BS 7228 : Part 2
BS 7228 : Part 3
BS 7228 : Part 4 : Section 4.1
BS 7228 : Part 5 : Section 5.1
BS 7228 : Part 6
BS ISO/IEC 9314-8
BS ISO/IEC 9314-7
BS ISO 8297
BS 1646 : Part 1
BS 1646 : Part 2
BS 1655
BS 3238 : Part 2
BS 1646 : Part 3
Supplementary Service (QSIG-MWI)
BS ISO/IEC 15505 Information technology
- Private Integrated Services Network
(PISN) - Specification, functional model
and information flows - Message Waiting
Indication Supplementary Service
(MWISD)
Industrial robots -- Guide to definitions of
coordinate systems and motions
Industrial robots -- Specification for the
presentation of characteristics by the
manufacturer
Industrial robots -- Performance criteria
and testing -- Methods for comprehensive
testing
Industrial robots -- Mechanical interfaces -Specification for circular form (form A)
Industrial robots -- Recommendations for
safety
BS ISO/IEC 9314-8 Information
technology - Fibre Distributed Data
Interface (FDDI) - Part 8 : Media Access
Control-2 (MAC-2)
BS ISO/IEC 9314-7 Information
technology - Fibre Distributed Data
Interface (FDDI) - Part 7 : Physical layer
protocol (PHY-2)
Acoustics. Determination of sound power
levels of multisource industrial plants for
evaluation of sound pressure levels in the
environment. Engineering method
Symbolic representation for process
measurement control functions and
instrumentation -- Basic requirements
Symbolic representation for process
measurement control functions and
instrumentation -- Specification for
additional basic requirements
Specification for flanged automatic control
valves for the process control industry
(face-to-face dimensions)
Graphical symbols for components of
serve-mechanisms -- General servemechanisms
Symbolic representation for process
measurement control functions and
DD ENV 12097
BS 1646 : Part 4
BS 5700
BS 5793 : Part 3 : Section 3.2
BS EN 21683
BS 5793 : Part 4
BS 5793 : Part 5
BS 5793 : Part 6
BS 5793 : Part 8 : Section 8.1
BS EN 29053
BS EN 60651
BS 5863 : Part 1
BS 5863 : Part 2
BS 5967 : Part 3
instrumentation -- Specification for detailed
symbols for instrument interconnection
diagrams
DD ENV 12097 Ventilation for buildings Ductwork - Requirements for ductwork
components to facilitate maintenance of
ductwork systems
Symbolic representation for process
measurement control functions and
instrumentation -- Specification for basic
symbols for process computer, interface
and shared display/control functions
Guide to process control using quality
control chart methods and cusum
techniques
Industrial-process control valves -Dimensions -- Specification for face-toface dimensions for flangeless control
valves except wafer butterfly valves
Acoustics. Preferred reference quantities
for acoustic levels
Industrial-process control valves -Specification for inspection and routine
testing
Dimensions -- Specification for marking
Dimensions -- Specification for mounting
details for attachment of positioners to
control valve actuators
Dimensions -- Noise considerations -Method for laboratory measurement of
noise generated by aerodynamic flow
through control valves
Acoustics. Materials for acoustical
applications. Determination of airflow
resistance
Specification for sound level meters
Analogue signals for process control
systems -- Specification for direct current
signals
Analogue signals for process control
systems -- Specification for direct voltage
signals
Operating conditions for industrial-process
measurement and control equipment -Methods for assessing degree of immunity
of systems or parts of systems when
BS 5967 : Part 4
BS 6667 : Part 1
BS 6667 : Part 3
BS 6739
BS 6869
BS 7494 : Part 1
BS 7623
BS 4142
BS 4183
BS 5228:Part 2
BS 5228:Part 4
BS 5944 : Part 1
BS EN 61566
BS EN 61595-2
subjected to mechanical influences
Operating conditions for industrial-process
measurement and control equipment -Classification of corrosive and erosive
environmental conditions
Electromagnetic compatibility for
industrial-process measurement and control
equipment -- General introduction
Electromagnetic compatibility for
industrial-process measurement and control
equipment -- Method of evaluating
susceptibility to radiated electromagnetic
energy
Code of practice for instrumentation in
process control systems : installation
design and practice
Code of practice for procedures for
ensuring the cleanliness of industrialprocess measurement and control
equipment in oxygen service
Performance and testing of teleprotection
equipment of power systems -Specification for narrow-band command
systems
Electrical and pneumatic analogue chart
recorders for use in industrial-process
control systems. Guidance for inspection
and routine testing
Method for rating industrial noise affecting
mixed residential and industrial areas
Specification for machine screws and
machine screw nuts. Metric series
Noise control on construction and open
sites -- Guide to noise control legislation
for construction and demolition, including
road construction and maintenance
Code of practice for noise and vibration
control applicable to piling operations
Measurement of airborne noise from
hydraulic fluid power systems and
components -- Method of test for pumps
BS EN 61566 Measurement of exposure to
radio-frequency electromagnetic fields Field strength in the frequency range 100
kHz to 1 GHz
BS EN 61595-2 Multichannel digital audio
BS 5944 : Part 2
BS 5944 : Part 4
BS 5944 : Part 5
BS 5944 : Part 6
BS 6812 : Part 1
BS EN 60382
BS EN 61248-7
BS EN 61041-5
BS EN 61041-4
BS 6812 : Part 2
BS 6812 : Part 3
tape recorder (DATR), reel-to-reel system,
for professional use - Part 2 : Format B
Measurement of airborne noise from
hydraulic fluid power systems and
components -- Method of test for motors
Measurement of airborne noise from
hydraulic fluid power systems and
components -- Method of determining
sound power levels from valves controlling
flow and pressure
Measurement of airborne noise from
hydraulic fluid power systems and
components -- Simplified method of
determining sound power levels from
pumps using an anechoic chamber
Measurement of airborne noise from
hydraulic fluid power systems and
components -- Method of test for pumps
using a parallelepiped microphone array
Airborne noise emitted by earth-moving
machinery -- Method of measurement of
exterior noise in a stationary test condition
Analogue pneumatic signal for process
control systems
BS EN 61248-7 Transformers and
inductors for use in electronic and
telecommunication equipment - Part 7 :
Sectional specification for high-frequency
inductors and intermediate transformers on
the basis of the capability approval
procedure
BS EN 61041-5 Methods of measurement Non-broadcast video tape recorders - Part 5
: High-band video tape recorders, including
those equipped with Y/C video connectors
(NTSC/PAL)
BS EN 61041-4 Methods of measurement Non-broadcast video tape recorders - Part 4
: Calibration tape (NTSC/PAL/SECAM)
Airborne noise emitted by earth-moving
machinery -- Method of measurement at
the operator's position in a stationary test
condition
Airborne noise emitted by earth-moving
machinery -- Method of measurement of
exterior noise in dynamic test conditions
BS EN 60534-2-2
BS EN 60534-2-3
BS EN 60169-21
DD ENV 12694
DD ENV 12694
DD ENV 12694
DD ENV 12795
DD ENV 12796
BS EN 60601-2-11
BS EN 61953
BS EN 160200-2
BS 6916 : Part 6
BS EN 60534-8-4
Industrial-process control valves -- Flow
capacity -- Sizing equations for
compressible fluid flow under installed
conditions
Industrial-process control valves -- Flow
capacity -- Test procedures
BS EN 60169-21 Radio-frequency
connectors - Part 21 : Two types of radiofrequency connectors with inner diameter
of outer conductor 9,5 mm (0,374 in) with
different versions of screw coupling Characteristic impedance 50 ohms (Types
SC-A and SC-B)
DD ENV 12694 Public transport - Road
vehicles - Dimensional requirements for
variable electronic external signs
DD ENV 12694 Public transport - Road
vehicles - Dimensional requirements for
variable electronic external signs
DD ENV 12694 Public transport - Road
vehicles - Dimensional requirements for
variable electronic external signs
DD ENV 12795 Road Traffic and
Transport Telematics (RTTT) - Dedicated
Short Range Communication (DSRC) DSRC Data Link Layer: Medium Access
and Logical Link Control
DD ENV 12796 Road transport and traffic
telematics - Public transport - Validators
BS EN 60601-2-11 Medical electrical
equipment - Part 2 : Particular
requirements for safety - Section 2.11 :
Specification for gamma beam therapy
equipment
BS EN 61953 Diagnostic X-ray imaging
equipment - Characteristics of
mammographic anti-scatter grids
BS EN 160200-2 Harmonized system of
quality assessment for electronic
components - Sectional specification:
Microwave modular electronic units of
assessed quality - Part 2 : Index of test
methods
Chain saws -- Method of measurement of
airborne noise at the operator's position
Industrial-process control valves -- Noise
BS 7135: Part 1
BS 7135: Part 2
BS EN 60598-2-4
BS EN 60335-2-40
BS 7135: Part 3
BS 7136: Part 1
BS 7140
BS 7458 : Part 1
BS 7458 : Part 2
BS EN 60335-2-40
BS EN 60654-1
BS EN 61003-1
BS EN 61069-1
considerations -- Prediction of noise
generated by hydrodynamic flow
Noise emitted by computer and business
equipment -- Method of measurement of
airbone noise
Noise emitted by computer and business
equipment -- Method of measurement of
high-frequency noise
BS EN 60598-2-4 Luminaires - Part 2 :
Particular requirements - Section 2.4 :
Portable general purpose luminaires
BS EN 60335-2-40 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.40 :
Electrical heat pumps, air-conditioners and
dehumidifiers
Noise emitted by computer and business
equipment -- Method for determining and
verifying declared noise emission values
Brush saws -- Method of measurement at
the operator's position of emitted airborne
noise
Airborne noise emitted by woodworking
machine tools. Operating conditions for
woodworking machines
Test code for the measurement of airborne
noise emitted by rotating electrical
machinery -- Engineering method for freefield conditions over a reflecting plane
Test code for the measurement of airborne
noise emitted by rotating electrical
machinery -- Survey method
BS EN 60335-2-40 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.40 :
Electrical heat pumps, air-conditioners and
dehumidifiers
Industrial-process measurement and control
equipment. Operating conditions -Climatic conditions
Industrial-process control systems.
Instruments with analogue inputs and twoor multi-state outputs -- Methods of
evaluating the performance
Industrial-process measurement and
control. Evaluation of system properties for
BS EN 61069-2
BS EN 61069-5
BS EN 61131-1
BS EN 61131-3
BS ISO 9902
BS EN 25136
BS EN 28960
BS EN 60034-9
BS EN 60534-8-4
BS EN 60704-1
BS EN 60704-2-1
BS EN 60335-2-88
BS 3425
BS 3539
the purpose of system assessment -General considerations and methodology
Industrial-process measurement and
control. Evaluation of system properties for
the purpose of system assessment -assessment methodology
Industrial-process measurement and
control. Evaluation of system properties for
the purpose of system assessment -Assessment of system dependability
Programmable controllers -- General
information
Programmable controllers --Programming
languages
Textile machinery acoustics. Determination
of sound pressure levels and sound power
levels emitted by textile machines.
Engineering and survey methods
Acoustics. Determination of sound power
radiated into a duct by fans. In-duct method
Refrigerators, frozen food storage cabinets
and food freezers for household and similar
use. Measurement of emission of airborne
acoustical noise
Rotating electrical machines -- Noise limits
Industrial-process control valves -- Noise
considerations -- Prediction of noise
generated by hydrodynamic flow
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- General
requirements
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Vacuum cleaners
BS EN 60335-2-88 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.88 :
Humidifiers intended for use with heating,
ventilation, or air-conditioning systems
Method for the measurement of noise
emitted by motor vehicles
Specification for sound level meters for the
measurement of noise emitted by motor
vehicles
BS 5331
BS 6086
BS EN 60704-2-2
BS EN 60704-2-3
BS EN 60704-2-4
BS EN 60704-2-5
BS EN 60704-2-6
BS EN 60704-3
BS 4185 : Part 6
BS 4185 : Part 1
BS EN 22922
BS 4185 : Part 10
BS 4185 : Part 11
Method of test for measurement of the
physical properties of sonic bangs
Method of measurement of noise inside
motor vehicles
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Forced draught convection
heaters
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Particular requirements for
dishwashers
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Washing machines and
spin extractors
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Room heaters of the
storage type
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Tumble-dryers
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Procedure for determining
and verifying declared noise emission
values
Machine tool components -- Specification
for change gears
Machine tool components -- Locknuts ('C'
type, socket set screw locking)
Acoustics. Measurement of noise emitted
by vessels on inland water-ways and
harbours
Machine tool components -- Trapezoidal
threads for lead and feed screw assemblies
Machine tool components -Recommendations for accuracy grades of
gears
BS 4185 : Part 13
BS 4185 : Part 14
BS 4185 : Part 2
BS EN 61265
BS 4185 : Part 9
BS 4813
BS 6751
BS 3884 : Part 1
BS 3884 : Part 2
BS 3884 : Part 3
BS 2813
BS 6101 : Part 1
BS 6101 : Part 2
BS 6101 : Part 3
BS 6101 : Part 5
BS 6101 : Part 6
BS EN 60335-2-88
Machine tool components -- Specification
for dimensions of counterbored holes
Machine tool components -- Method for
determination of the pilot diameter of 60ø
centre holes
Machine tool components -- Collars
Electroacoustics. Instruments for
measurement of aircraft noise. Performance
requirements for systems to measure onethird-octave band sound pressure levels in
noise certification of transport-category
aircraft
Machine tool components -- Levelling
screws, nuts and seating plates
Method of measuring noise from machine
tools excluding testing in anechoic
chambers
Guide for protection of machine tools
intended for use in extreme environmental
conditions
Modular units for machine tools -Specification for basic units
Modular units for machine tools -Specification for workholding pallets up to
800 mm nominal size
Modular units for machine tools -Specification for workholding pallets over
800 mm nominal size
Specification for dimensions of plugs for
hearing aids
Machine tool ball screws -- Methods of
calculating dynamic and static load and life
ratings
Machine tool ball screws -- Specification
for accuracy, including geometrical tests
Machine tool ball screws -- Glossary of
terms
Machine tool ball screws -- Specification
for nominal diameters and nominal leads
Machine tool ball screws -- Specification
for ball nuts and principal dimensions of
ball screws
BS EN 60335-2-88 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.88 :
Humidifiers intended for use with heating,
BS 7568 : Part 25
BS 7568 : Part 26
BS 7568 : Part 27
BS 7568 : Part 28
BS 7568 : Part 29
BS 426
BS 1089
BS 1098 : Part 2
BS 1660 : Part 1
BS 1660 : Part 10
BS 1660 : Part 11
BS 1660 : Part 12
BS 1660 : Part 2
BS 1660 : Part 3
BS 1660 : Part 4
BS 1660 : Part 5
BS 1660 : Part 6
BS 1660 : Part 7
BS 1660 : Part 9
BS 1935
ventilation, or air-conditioning systems
Press tools -- Guide pillars. Types
Press tools -- Guide pillars. Type A,
straight pillars
Press tools -- Guide pillars. Type B, endlocking pillars
Press tools -- Guide pillars. Type C, pillars
with taper lead and bush
Press tools -- Guide pillars. Type D, endlocking pillars with flange
Specification for fixed centres for use on
machine tools and in other applications
Specification for workhead spindle noses
for grinding machines : cylindrical
external, internal and universal types
Specification for jig bushes -- Metric units
Machine tapers -- Specification for shanks
and sockets with self-holding tapers (Morse
and metric 5%)
Machine tapers -- Specification for drill
chuck tapers (Jacob and short Morse)
Machine tapers -- Specification for gauges
Machine tapers -- Specification for positive
drive of Morse tapers
Machine tapers -- Specification for
reduction sleeves and extension sockets for
tools with Morse taper shanks
Machine tapers -- Specification for turret
sockets and reduction sleeves with tapped
ends for tools with Morse taper shanks
Machine tapers -- Specification for spindle
noses and tool shanks with self-release
7/24 tapers
Machine tapers -- Specification for
reduction sleeves with external and internal
7/24 tapers
Machine tapers -- Specification for
adaptors with external 7/24 tapers for tools
with Morse taper shanks
Machine tapers -- Specification for
extension adaptors with external 7/24
tapers for tools with Morse taper shanks
Machine tapers -- Specification for cotter
slots
Specification for spindle noses and
adjustable adapters for multi-spindle heads
BS 1983 : Part 1
BS 1983 : Part 2
BS 1983 : Part 3
BS 1983 : Part 4
BS 1983 : Part 5
BS 1983 : Part 6
BS 1983 : Part 7
BS 4193 : Part 6
BS 4193 : Part 13
BS 4193 : Part 14
BS 4442: Part 1:
BS 4581: Part 1
BS 4581: Part 2
Chucks for machine tools and portable
power tools -- Tool-holding chucks
Chucks for machine tools and portable
power tools -- Specification for
workholding chucks, power operated
Chucks for machine tools and portable
power tools -- Specification for dimensions
of collet pads for base jaws of power
operated workholding chucks
Chucks for machine tools and portable
power tools -- Specification of criteria to be
stated affecting performance of power
operated workholding chucks at speed
Chucks for machine tools and portable
power tools -- Code of practice for the safe
operation of workholding chucks used on
lathes
Chucks for machine tools and portable
power tools -- Specification for jaw
serrations, interfaces and tee nuts
Chucks for machine tools and portable
power tools -- Specification for
workholding chucks with 2-piece jaws,
power operated
Hardmetal insert tooling -- Specification
for the designation of turning and copying
tool holders and cartridges for indexable
(throwaway) inserts
Hardmetal insert tooling -- Specification
for dimensions of indexable hardmetal
inserts having 7° normal clearance,
rounded corners and partly cylindrical
fixing hole
Hardmetal insert tooling -- Specification
for designation of boring bars (tool holders
with cylindrical shank) for indexable
inserts
Specification for lathe spindle noses
faceplates -- Types 'A' and 'Camlock'
Flanges for mounting grinding wheels on
grinding machine tools -- Specification for
dimensions of flanges for grinding wheels
of 76.2 mm bore and greater
Flanges for mounting grinding wheels on
grinding machine tools Specification for
dimensions and materials of flanges for
BS 4656 : Part 12
BS 5078
BS 5326
BS 5535
BS 6386 : Part 1
BS 6386 : Part 2
BS 6607 : Part 1
BS 6607 : Part 2
BS 6607 : Part 3
BS 7564 : Part 10
BS 7568 : Part 11
BS 7568 : Part 31
BS 6607 : Part 4
BS 7568 : Part 32
BS 5739
BS 4009
BS 3641 : Part 1
BS 3641 : Part 2
grinding wheels of less than 76.2 mm bore
Accuracy of machine tools and methods of
test -- Dividing heads
Specification for jig and fixture
components
Specification. Internal broaching tools and
pull chuck locations
Specification for right angle and box angle
plates
Tool chucks with clamp screws for flatted
parallel shanks -- Specification for
dimensions of chuck nose
Tool chucks with clamp screws for flatted
parallel shanks -- Specification for
dimensions of taper shanks
Tool shanks with 7/24 taper for automatic
tool changers -- Specification for shanks
Nos. 40, 45, and 50
Tool shanks with 7/24 taper for automatic
tool changers -- Specification for retention
knobs for shanks Nos. 40, 45 and 50
Tool shanks with 7/24 taper for automatic
tool changers -- Specification for tapers for
spindle noses
Tools for moulding -- Specification for
dimensions of support pillars
Press tools -- Wear plates for press dies.
Type A
Press tools -- Specification for guide
bushes : form E, gliding bushes, flanged,
type 2
Tool shanks with 7/24 taper for automatic
tool changers -- Specification for functional
dimensions of front faces of spindle
holders for machine centres
Press tools -- Specification for guide
bushes : form F, ball cage bushes, flanged,
type 2
Method of presentation of lubrication
instructions for machine tools
Specification for artificial mastoids for the
calibration of bone vibrators used in
hearing aids and audiometers
Symbols for machine tools General
symbols
Symbols for machine tools Specification
BS 3641 : Part 3
BS EN 60335-2-59
BS EN 186290
BS 3800 : Part 1
BS 3800 : Part 3
BS 6083 : Part 11
BS 6083 : Part 1
BS EN ISO 7346-1
BS EN ISO 7346-2
BS 6083 : Part 3
BS 6083 : Part 4
BS 6083 : Part 5
for numerical control symbols
Symbols for machine tools Additional
general symbols
BS EN 60335-2-59 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.59 :
Insect killers
BS EN 186290 Harmonized system of
quality assessment for electronic
components - Connector sets for optical
fibres and cables - Type MPO
General tests for machine tools -- Code of
practice for testing geometric accuracy of
machines operating under no load or
finishing conditions
General tests for machine tools -- Method
of testing performance of machines
operating under loaded conditions in
respect of thermal distortion
Hearing aids -- Specification for symbols
and other markings on hearing aids and
related equipment
Hearing aids -- Method for measurement of
characteristics of hearing aids with
induction pick-up coil input
BS EN ISO 7346-1 Water quality Determination of the acute lethal toxicity of
substances to a fresh water fish
[Brachydanio rerio Hamilton-Buchanan
(Teleostei, Cyprinidae)] - Static method
BS EN ISO 7346-2 Water quality Determination of the acute lethal toxicity of
substances to a fresh water fish
[Brachydanio rerio Hamilton-Buchanan
(Teleostei, Cyprinidae)] - Semi-static
method
Hearing aids -- Methods for measurement
of electroacoustical characteristics of
hearing aid equipment not entirely worn
listener
Hearing aids -- Specification for magnetic
field strength in audio-frequency induction
loops for hearing aid purposes
Hearing aids -- Specification for
dimensions of the nipple and sealing device
for insert earphones
BS 4656 : Part 1
BS 4656 : Part 10
BS 4656 : Part 11
BS EN ISO 7346-3
BS EN 60684-2
BS 4656 : Part 12
DD ENV 1996-1-2
DD ENV 1996-1-2
BS EN 60874-17
BS 4656 : Part 15
BS 4656 : Part 18
BS 4656 : Part 2
BS IEC 61334-1-4
Accuracy of machine tools and methods of
test -- Specification for lathes, general
purpose type
Accuracy of machine tools and methods of
test -- Drilling machines, radial type
Accuracy of machine tools and methods of
test -- Drilling machines, vertical floor
mounted column and pillar types
BS EN ISO 7346-3 Water quality Determination of the acute lethal toxicity of
substances to a fresh water fish
[Brachydanio rerio Hamilton-Buchanan
(Teleostei, Cyprinidae)] - Flow-through
method
BS EN 60684-2 Flexible insulating
sleeving - Part 2 : Methods of test
Accuracy of machine tools and methods of
test -- Dividing heads
DD ENV 1996-1-2 Eurocode 6 : Design of
masonry structures - Part 1-2 : General
rules - Structural fire design (together with
United Kingdom National Application
Document)
DD ENV 1996-1-2 Eurocode 6 : Design of
masonry structures - Part 1-2 : General
rules - Structural fire design (together with
United Kingdom National Application
Document)
BS EN 60874-17 Connectors for optical
fibres and cables - Part 17 : Sectional
specification for fibre optic connector Type F-05 (friction lock)
Accuracy of machine tools and methods of
test -- Drilling machines, turret and single
spindle co-ordinate types
Accuracy of machine tools and methods of
test -- Specification for broaching
machines, horizontal internal type
Accuracy of machine tools and methods of
test -- Specification for copying lathes and
copying attachments
BS IEC 61334-1-4 Distribution automation
using distribution line carrier systems - Part
1 : General considerations - Section 4 :
Guide to identification of data transmission
parameters concerning medium and low-
BS IEC 61334-1-4
BS IEC 61334-1-4
BS 4656 : Part 22
BS 4656 : Part 23
BS 4656 : Part 24
BS 4656 : Part 26
BS 4656 : Part 25
BS 4656 : Part 29
BS 4656 : Part 28
BS 4656 : Part 3
BS IEC 61334-1-1
BS 4656 : Part 32
BS 4656 : Part 34
voltage distribution mains
BS IEC 61334-1-4 Distribution automation
using distribution line carrier systems - Part
1 : General considerations - Section 4 :
Guide to identification of data transmission
parameters concerning medium and lowvoltage distribution mains
BS IEC 61334-1-4 Distribution automation
using distribution line carrier systems - Part
1 : General considerations - Section 4 :
Guide to identification of data transmission
parameters concerning medium and lowvoltage distribution mains
Accuracy of machine tools and methods of
test -- Specification for vertical boring and
turning lathes, single and double column
types
Accuracy of machine tools and methods of
test -- Surface grinding machines with two
columns - slideway grinding machines
Accuracy of machine tools and methods of
test -- Specification for cylindrical external
centreless grinding machines
Accuracy of machine tools and methods of
test -- Gear shaping machines
Accuracy of machine tools and methods of
test -- Gear planing machines
Accuracy of machine tools and methods of
test -- Specification for automatic lathes,
multi-spindle (indexing drum) type
Accuracy of machine tools and methods of
test -- Specification for numerically
controlled turning machines up to and
including 1500 mm turning diameter
Accuracy of machine tools and methods of
test -- Milling machines, knee and column
type, horizontal or vertical spindle plain
BS IEC 61334-1-1 Distribution automation
using distribution line carrier systems - Part
1 : General considerations - Section 1 :
Guide to distribution automation system
architecture
Accuracy of machine tools and methods of
test -- Specification for boring and milling
machines, planer type
Accuracy of machine tools and methods of
BS 4656 : Part 35
BS 7594
BS IEC 61334-1-1
BS EN 61243-2
BS 4656 : Part 37
BS 4656 : Part 38
BS 4656 : Part 4
BS 7636
BS 4656 : Part 5
BS 4656 : Part 6
BS 4656 : Part 7
BS 4656 : Part 8
BS 4656 : Part 9
BS ISO 389-4
test -- Specification for power presses,
mechanical open front type
Accuracy of machine tools and methods of
test -- Specification for capstan, turret and
automatic lathes, single spindle type less
than 25 mm diameter capacity
Code of practice for audio-frequency
induction-loop systems (AFILS)
BS IEC 61334-1-1 Distribution automation
using distribution line carrier systems - Part
1 : General considerations - Section 1 :
Guide to distribution automation system
architecture
BS EN 61243-2 Live working - Voltage
detectors - Part 2 : Resistive type to be used
for voltages of 1 kV to 36 kV a.c.
Accuracy of machine tools and methods of
test -- Specification for piano-milling
machines, gantry type
Accuracy of machine tools and methods of
test -- Specification for surface finish of
test pieces
Accuracy of machine tools and methods of
test -- Milling machines, bed type,
horizontal or vertical spindle
Method of determination of thresholds of
hearing using sound field audiometry with
pure tone and narrow-band test signals
Accuracy of machine tools and methods of
test -- Milling machines, knee and column
type, horizontal spindle, universal
Accuracy of machine tools and methods of
test -- Specification for surface grinding
machines, vertical spindle, reciprocating
table type
Accuracy of machine tools and methods of
test -- Specification for surface grinding
machines, horizontal spindle, reciprocating
table type
Accuracy of machine tools and methods of
test -- Internal cylindrical grinding
machines with horizontal spindle
Accuracy of machine tools and methods of
test -- External cylindrical grinding
machines with reciprocating table
Acoustics. Reference zero for the
BS EN 60118-1
BS EN 60645-1
BS EN 61334-4-41
BS EN 61243-1
BS ISO 389-3
BS ISO/IEC 15026
BS ISO/IEC 12089
BS EN 60645-3
BS EN 60645-4
BS EN 61027
BS EN 61043
BS 1498
BS EN 61094-2
BS 2769 : Part 2 : Section 2.15
calibration of audiometric equipment -Reference levels for narrow-band masking
noise
Hearing aids -- Hearing aids with induction
pick-up coll input
Audiometers -- Pure-tone audiometers
BS EN 61334-4-41 Distribution
automation using distribution line carrier
systems - Part 4 : Data communication
protocols - Section 41 : Application
protocols Distribution line message
specification
BS EN 61243-1 Live working - Voltage
detectors - Part 1 : Capacitive type to be
used for voltages exceeding 1 kV a.c.
Acoustics. Reference zero for the
calibration of audiometric equipment -Reference equivalent threshold force levels
for pure tones and bone vibrators
BS ISO/IEC 15026 Information technology
- System and software integrity levels
BS ISO/IEC 12089 Information technology
- Computer graphics and image processing
- Encoding for the Image Interchange
Facility (IIF)
Audiometers -- Auditory test signals of
short duration for audiometric and neurootological purposes
Audiometers -- Equipment for extended
high-frequency audiometry
Specification for instruments for the
measurement of aural acoustic
impedance/admittance
Specification for electroacoustics.
Instruments for the measurement of sound
intensity. Measurement with pairs of
pressure sensing microphones
Specification for gear bobbing machines
for turbines and similar drives
Specification for measurement
microphones -- Primary method for
pressure calibration of laboratory standard
microphones by the reciprocity technique
Hand-held electric motor-operated tools -Particular requirements -- Specification for
routers
BS EN 61101
BS 4582: Part 2
BS EN 61102
BS EN 61161
BS EN 61183
BS EN 61206
BS 5517
BS 3015
BS 4999:Part 142
BS 6414
BS 6632
BS EN 61220
BS 6633
BS 1660 : Part 10
BS 6897 : Part 2
BS 6897 : Part 5
Specification for absolute calibration of
hydrophones using the planar scanning
technique in the frequency range 0, 5 MHz
to 15 MHz
Specification for fine pitch gears (metric
module) -- Hobs and cutters
Specification for measurement and
characterisation of ultrasonic fields using
hydrophones in the frequency range 0.5
MHz to 15 MHz
Specification for ultrasonic power
measurement in liquids in the frequency
range 0.5 MHz to 25 MHz
Electroacoustics. Random-incidence and
diffuse-field calibration of sound level
meters
Ultrasonics. Continuous-wave Doppler
systems. Test procedures
Specification for dimensions of metric long
arbors and their accessories for milling
machines
Glossary of terms relating to mechanical
vibration and shock
General requirements for rotating electrical
machines -- Specification for mechanical
performance: vibration
Method for specifying characteristics of
vibration and shock isolators
Method for measurement and reporting of
shipboard vibration data
Ultrasonics. Fields. Guidance for the
measurement and characterisation of
ultrasonic fields generated by medical
ultrasonic equipment using hydrophones in
the frequency range 0.5 MHz to 15 MHz
Method for measurement and reporting of
local vibration data of ship structures and
equipment
Machine tapers -- Specification for drill
chuck tapers (Jacob and short Morse)
Experimental determination of mechanical
mobility -- Measurements using singlepoint translation excitation with an attached
vibration exciter
Experimental determination of mechanical
mobility -- Measurement using impact
BS 6955 : Part 1
BS 6955 : Part 10
BS 6955 : Part 11
BS 6955 : Part 12
BS 6955 : Part 13
BS 6955 : Part 14
BS 6955 : Part 15
BS 6955 : Part 16
BS 6955 : Part 17
BS 6955 : Part 18
BS 6955 : Part 19
BS 6955 : Part 2
BS 6955 : Part 3
BS 6955 : Part 4
BS 6955 : Part 5
BS 6955 : Part 6
excitation with an exciter which is not
attached to the structure
Calibration of vibration and shock pick-ups
-- Methods for primary vibration
calibration by laser interferometry
Calibration of vibration and shock pick-ups
-- Method for primary calibration by high
impact shocks
Calibration of vibration and shock pick-ups
-- Method of test for transverse vibration
sensitivity
Calibration of vibration and shock pick-ups
-- Method of test for transverse shock
sensitivity
Calibration of vibration and shock pick-ups
-- Method of test for base strain sensitivity
Calibration of vibration and shock pick-ups
-- Method of test for resonance frequency
of undamped accelerometers on a steel
block
Calibration of vibration and shock pick-ups
-- Method of test for acoustic sensitivity
Calibration of vibration and shock pick-ups
-- Method of test for mounting torque
sensitivity
Calibration of vibration and shock pick-ups
-- Method of test for fixed temperature
sensitivity
Calibration of vibration and shock pick-ups
-- Method of test for transient temperature
sensitivity
Calibration of vibration and shock pick-ups
-- Method of test for magnetic field
sensitivity
Calibration of vibration and shock pick-ups
-- Methods for primary shock calibration
by light cutting
Calibration of vibration and shock pick-ups
-- Methods for secondary vibration
calibration
Calibration of vibration and shock pick-ups
-- Method for secondary shock calibration
Calibration of vibration and shock pick-ups
-- Method for calibration by earth's
gravitation
Calibration of vibration and shock pick-ups
BS 6955 : Part 7
BS 6955 : Part 8
BS 6955 : Part 9
BS 1089
BS 2064 : Part 1
BS EN 61076-3-101
BS 7385: Part 2
BS 7439
BS 4390
BS 4581: Part 1
BS 4581: Part 2
DD ENV 28041
BS EN 30326-1
BS EN 60994
-- Method for primary vibration calibration
at low frequencies
Calibration of vibration and shock pick-ups
-- Methods for primary calibration by
centrifuge
Calibration of vibration and shock pick-ups
-- Method for primary calibration by dual
centrifuge
Calibration of vibration and shock pick-ups
-- Method for secondary vibration
calibration by comparison of phase angles
Specification for workhead spindle noses
for grinding machines : cylindrical
external, internal and universal types
Diamond abrasive products -- Specification
for diamond and cubic boron nitride
abrasive grinding wheels
BS EN 61076-3-101 Connectors with
assessed quality, for use in d.c., lowfrequency analogue and in digital highspeed data applications - Part 3 :
Rectangular connectors - Section 101 :
Detail specification for a range of shielded
connectors with trapezoi
Evaluation and measurement for vibration
in buildings -- Guide to damage levels from
groundborne vibration
Method for exchange of information for the
analytical assessment of shock resistance of
mechanical systems
Specification for portable pneumatic
grinding machines
Flanges for mounting grinding wheels on
grinding machine tools -- Specification for
dimensions of flanges for grinding wheels
of 76.2 mm bore and greater
Flanges for mounting grinding wheels on
grinding machine tools Specification for
dimensions and materials of flanges for
grinding wheels of less than 76.2 mm bore
Human response to vibration. Measuring
instrumentation
Mechanical vibration. Laboratory method
for evaluating vehicle seat vibration -Basic requirements
Guide for field measurement of vibrations
BS 950 : Part 1
BS 950 : Part 2
BS 1376
BS 5252
BS 5775 : Part 6
BS 7645
BS 3625
BS 5849
BS 387
BS 1919 : Part 1
BS 2064 : Part 2
BS 2064 : Part 3
BS 2769 : Part 2 : Section 2.12
BS EN 61207-6
BS 5775 : Part 4
BS EN 61188-1-1
and pulsations in hydraulic machines
(turbines, storage pumps and pumpturbines)
Specification for artificial daylight for the
assessment of colour -- Illuminant for
colour matching and colour appraisal
Specification for artificial daylight for the
assessment of colour -- Illuminant for
colour matching and colour appraisal -Viewing conditions for the graphic arts
industry
Specification for colours of light signals
Framework for colour co-ordination for
building purposes
Specification for quantities, units and
symbols -- Light and related
electromagnetic radiations
Code for designation of colours
Specification for eyepiece and screen
graticules for the determination of the
particle size of powders
Method of expression of performance of air
quality infra-red analysers
Specification for interchangeability
dimensions of the drive of solid and
segmental circular saws for cold cutting of
metals : saw diameter range 224 mm to
2240 mm
Hacksaw blades -- Specification for hand
and machine hacksaw blades
Diamond abrasive products -- Specification
for diamond abrasive circular saws and
frame saws
Diamond abrasive products -- Dimensions
of steel blades for segmented saws for
cutting of stone and masonry
Hand-held electric motor-operated tools -Particular requirements -- Specification for
chain saws
Expression of perfomance of gas analyzers
-- Photometric analyzers
Specification for quantities, units and
symbols -- Heat
BS EN 61188-1-1 Printed boards and
assemblies - Design and use - Part 1 :
Generic requirements - Section 1 : Flatness
BS EN 60512-1-3
BS EN 60512-1-4
BS EN 60512-19-3
BS EN 60352-6
BS 1041 : Part 4
BS 2842
BS EN 60352-1
BS ISO/IEC 14143-1
BS EN ISO 8871
PD 6613
DD ENV 993-11
BS 3273
BS 4833
considerations for electronic assemblies
BS EN 60512-1-3 Electromechanical
components for electronic equipment Basic testing procedures and measuring
methods - Part 1 : General examination Section 3 : Test 1c. Electrical engagement
length
BS EN 60512-1-4 Electromechanical
components for electronic equipment Basic testing procedures and measuring
methods - Part 1 : General - Section 4 :
Test 1d. Contact protection effectiveness
(scoop-proof)
BS EN 60512-19-3 Electromechanical
components for electronic equipment Basic testing procedures and measuring
methods - Part 19 : Chemical resistance
tests - Section 3 : Test 19c. Fluid resistance
BS EN 60352-6 Solderless connections Part 6 : Solderless insulation piercing
connections - General requirements, test
methods and practical guidance
Guide to the selection and use of
thermocouples
Specification for whirling hygrometer
BS EN 60352-1 Solderless connections Part 1 : Wrapped connections - General
requirements, test methods and practical
guidance
BS ISO/IEC 14143-1 Information
technology - Software measurement Functional size measurement - Part 1 :
Definition of concepts
BS EN ISO 8871 Elastomeric parts for
aqueous parenteral preparations
PD 6613 Biotechnology - Microorganisms
- Examination of the various existing lists
of animal pathogens and production of a
report
DD ENV 993-11 Dense shaped refractory
products - Part 11 : Determination of
resistance to thermal shock
Specification for distant indicating
thermometers for ships' refrigerated cargo
spaces
Schedule for hygrometric tables for use in
BS 1296 : Part 2
BS 4937:Part 30
BS 1296 : Part 3
BS 1296 : Part 4
BS 7448 : Part 4
BS EN 60669-2-1
BS ISO TR 12764
BS EN 50122-1
BS 4193 : Part 6
BS 4193 : Part 14
BS EN 50122-1
BS EN 50122-1
BS 5248
BS 4193 : Part 1
the testing and operation of environmental
enclosures
Specification for single point cutting tools - Nomenclature
Extension and compensating cables.
Tolerances and identification system
Specification for single point cutting tools - Butt-welded cutting tools and blanks
Specification for single point cutting tools - Ground high speed steel tool bits
BS 7448 : Part 4 Fracture mechanics
toughness tests - Part 4 : Method for
determination of fracture resistance curves
and initiation values for stable crack
extension in metallic materials
BS EN 60669-2-1 Switches for household
and similar fixed-electrical installations Part 2 : Particular requirements - Section 1
: Electronic switches
BS ISO TR 12764 Measurement of fluid
flow in closed conduits - Flowrate
measurement by means of vortex shedding
flowmeters inserted in circular crosssection conduits running full
BS EN 50122-1 Railway applications Fixed installations - Part 1 : Protective
provisions relating to electrical safety and
earthing
Hardmetal insert tooling -- Specification
for the designation of turning and copying
tool holders and cartridges for indexable
(throwaway) inserts
Hardmetal insert tooling -- Specification
for designation of boring bars (tool holders
with cylindrical shank) for indexable
inserts
BS EN 50122-1 Railway applications Fixed installations - Part 1 : Protective
provisions relating to electrical safety and
earthing
BS EN 50122-1 Railway applications Fixed installations - Part 1 : Protective
provisions relating to electrical safety and
earthing
Specification for aspirated hygrometer
Hardmetal insert tooling -- Specification
BS 4193 : Part 10
BS 4193 : Part 11
BS 7575
BS 4193 : Part 12
BS 4193 : Part 15
BS 4193 : Part 16
BS 4193 : Part 17
BS 4193 : Part 18
BS 4193 : Part 19
BS 4193 : Part 2
BS 4193 : Part 20
BS 4193 : Part 21
BS EN 60584-2
BS 4193 : Part 3
for designation of indexable inserts for
cutting tools
Hardmetal insert tooling -- Specification
for end mills with indexable inserts and
Morse taper shank
Hardmetal insert tooling -- Specification
for dimensions of face milling cutters with
indexable inserts
Specification for resistance thermometers
and thermocouples for the measurement of
temperature in tanks containing refrigerated
light hydrocarbon fluids
Hardmetal insert tooling -- Specification
for dimensions of side and face milling and
slotting cutters with indexable inserts
Hardmetal insert tooling -- Specification
for dimensions for indexable hardmetal
(carbide) inserts with wiper edges but
without fixing hole
Hardmetal insert tooling -- Specification
for designation of shank type milling
cutters for indexable inserts
Hardmetal insert tooling -- Specification
for designation of bore type milling cutters
for indexable inserts
Hardmetal insert tooling -- Specification
for dimensions of boring bars for indexable
inserts
Hardmetal insert tooling -- Specification
for dimensions of indexable ceramic inserts
with rounded corners without fixing hole
Hardmetal insert tooling -- Specification
for dimensions for indexable hardmetal
(carbide) inserts with rounded corners,
without fixing hole
Hardmetal insert tooling -- Specification
for dimensions of ceramic inserts with
rounded corners with fixing hole
Hardmetal insert tooling -- Specification
for cylindrical shanks with a parallel flat
for drills with indexable inserts
Thermocouples -- Tolerances
Hardmetal insert tooling -- Specification
for dimensions of indexable hardmetal
(carbide) inserts with rounded corners and
with cylindrical fixing hole
BS 4193 : Part 7
BS 4193 : Part 8
BS 4193 : Part 9
BS 5912
BS EN 61152
BS 5775 : Part 5
BS 7638
PD 6575 : Part 2
BS 122
BS 328 : Part 5
PD 7639 : Part 1
PD 7639 : Part 2
BS 7745 : Part 1
BS ISO/IEC 10165-6
Hardmetal insert tooling -- Specification
for dimensions for single point turning and
copying tool holders for indexable inserts
Hardmetal insert tooling -- Specification
for dimensions for type A cartridges for
indexable (throwaway) inserts
Hardmetal insert tooling -- Specification
for end mills with indexable inserts and
flatted parallel shank
Specification for dimensions of driving
tenons and sockets for parallel shank drills
and machine reamers
Specification for dimensions of metalsheathed thermometer elements
Specification for quantities, units and
symbols -- Electricity and magnetism
Application guide for calculation of shortcircuit currents in low-voltage radial
systems
Short-circuit currents. Calculation of
effects -- Examples of calculation
Specification for two ply cotton fabric
interlayered with polychloroprene for
liferaft packs
Drills and reamers -- Specification for the
dimensions of countersinks and
counterbores
Short-circuit current calculation in threephase a.c. systems -- Factors for the
calculation of short-circuit currents in
three-phase a.c. systems according to BS
7639
Short- circuit current calculation in threephase a.c. systems -- Data for electrical
equipment for short-circuit current
calculations in accordance with BS 7639
End mills with brazed helical hardmetal
tips -- Dimensions of end mills with
parallel shank
BS ISO/IEC 10165-6 Information
technology - Open Systems
Interconnection - Structure of management
information: Requirements and guidelines
for implementation conformance statement
proformas associated with OSI
management
BS 7745 : Part 2
BS 7839
BS 90
BS 5326
BS 358
DD ENV 1504-9
DD ENV 1504-9
BS EN ISO 6411
BS EN ISO 3952-4
BS EN ISO 2203
BS EN ISO 2203
BS EN ISO 8826-2
BS EN ISO 8826-2
BS EN 61773
BS 2918 : Part 1
BS 328 : Part 1
End mills with brazed helical hardmetal
tips -- Dimensions of end mills with taper
shank
Solid hardmetal end-mills with parallel
shanks. Dimensions
Specification for direct-acting electrical
recording instruments and their accessories
Specification. Internal broaching tools and
pull chuck locations
Method for the measurement of voltage
with sphere-gaps (one sphere earthed)
DD ENV 1504-9 Products and systems for
the protection and repair of concrete
structures - Definitions, requirements,
quality control and evaluation of
conformity - Part 9 : General principles for
the use of products and systems
DD ENV 1504-9 Products and systems for
the protection and repair of concrete
structures - Definitions, requirements,
quality control and evaluation of
conformity - Part 9 : General principles for
the use of products and systems
BS EN ISO 6411 Technical drawings Simplified representation of centre holes
BS EN ISO 3952-4 Technical drawings Simplified representation for kinematics Part 4 : Miscellaneous mechanisms and
their components
BS EN ISO 2203 Technical drawing Conventional representation of gears
BS EN ISO 2203 Technical drawing Conventional representation of gears
BS EN ISO 8826-2 Technical drawings Roller bearings - Part 2 : Detailed
simplified representation
BS EN ISO 8826-2 Technical drawings Roller bearings - Part 2 : Detailed
simplified representation
BS EN 61773 Overhead lines - Testing of
foundations for structures
Methods of test for electric strength of
solid insulating materials -- Tests at power
frequencies
Drills and reamers -- Specification for twist
drills
BS EN 60068-2-75
PD 6618
DD ENV 12253
DD 241 : Part 1
BS 328 : Part 2
BS 328 : Part 4
BS 328 : Part 7
BS 328 : Part 8
BS 1157
DD 241 : Part 1
DD 241 : Part 2
DD 241 : Part 2
BS 5164
BS 1937
BS 5685 : Part 2
BS 5685 : Part 3
BS 1978
BS 2054
BS 5685 : Part 4
BS 2556
BS EN 60068-2-75 Environmental testing Part 2 : Tests - Test Eh : Hammer tests
PD 6618 Guidance on the classification of
dental devices and accessories
DD ENV 12253 Road Transport and
Traffic Telematics (RTTT) - Dedicated
Short Range Communications (DSRC) Physical Layer using Microwave at 5.8
GHz
DD 241 : Part 1 Specification for Control
Net - Part 1 : General description
Drills and reamers -- Combined drills and
countersinks (centre drills)
Drills and reamers -- Specification for
dimensions of reamers
Drills and reamers -- Counterbores with
parallel shanks and solid pilots
Drills and reamers -- Spot drills
Recommendations for tapping drill sizes
for use with fluted taps
DD 241 : Part 1 Specification for Control
Net - Part 1 : General description
DD 241 : Part 2 Specification for
ControlNet - Part 2 : Physical layer and
media
DD 241 : Part 2 Specification for
ControlNet - Part 2 : Physical layer and
media
Specification for indirect-acting electrical
indicating and recording instruments and
their accessories
Specification for engineers' ratchet braces
and drilling pillars
Electricity meters -- Specification for
single-phase coin operated prepayment flat
rate and two-part tariff watt-hour meters of
Class 2 and fixed charge collectors of Class
2
Electricity meters -- Specification for
meters having Class 1 electro-mechanical
maximum demand indicators
Specification for bit braces
Specification for augers and auger bits
Electricity meters -- Specification for Class
3 var-hour meters
Specification for hand and breast drills
BS 2593
BS 5788
BS 3088
BS 5813
BS 5621
BS 6348
DD 241 : Part 4
DD 241 : Part 4
BS 7850 : Part 1
BS 7850 : Part 2
BS 1919 : Part 1
BS 1919 : Part 2
BS 6271
BS EN 60387
BS 7398
DD 241 : Part 5
DD 241 : Part 5
BS EN 60514
BS EN 60521
BS EN 60523
BS EN 60688
BS EN 60868
BS EN 60868-0
Specification for rotary drill rods and
tungsten carbide tipped rotary drill bits
Method for expression of the properties of
sampling oscilloscopes
Specification for adjustable hand reamers
with inserted blades
Guide for expression of the performance of
pulse generators
Specification for dimensions of rotary
masonry and rotary masonry impact drills
with hardmetal tips
Method for expression of the properties of
signal generators
DD 241 : Part 4 Specification for
ControlNet - Part 4 : Network and transport
layer
DD 241 : Part 4 Specification for
ControlNet - Part 4 : Network and transport
layer
Total quality management -- Guide to
management principles
Total quality management -- Guidelines for
quality improvement
Hacksaw blades -- Specification for hand
and machine hacksaw blades
Hacksaw blades -- Specification for cutting
performance
Specification for miniature hacksaw blades
Specification for symbols for alternatingcurrent electricity meters
Specification for hand hacksaw frames
DD 241 : Part 5 Specification for
ControlNet - Part 5 : Data management
DD 241 : Part 5 Specification for
ControlNet - Part 5 : Data management
Acceptance inspection of class 2
alternating-current watthour meters
Class 0.5, 1 and 2 alternating-current
watthour meters
Direct-current potentiometers
Electrical measuring transducers for
converting a.c. electrical quantities to
analogue or digital signals
Flickermeter. Functional and design
specifications
Flickermeter -- Evaluation of flicker
BS 949 : Part 5
BS 949 : Part 1
DD 241 : Part 6
BS 949 : Part 3
BS 949 : Part 4
BS 1127 : Part 1
BS 1127 : Part 2
BS 1127 : Part 3
BS 1127 : Part 4
BS 1127 : Part 5
BS 1813
BS 3409 : Part 1
BS 3409 : Part 2
BS EN 61115
BS 498
BS 3775
BS 4489
BS 5210
DD 241 : Part 6
severity
Screwing taps -- Nomenclature and
terminology
Screwing taps -- Specification of general
dimensions
DD 241 : Part 6 Specification for
ControlNet - Part 6 : Object model
Screwing taps -- Specification for pipe
thread taps
Screwing taps -- Specification for metric
ground thread taps : manufacturing
tolerances
Screwing dies and dienuts -- Specification
for hand- and machine-operated circular
screwing dies and hand-operated die stocks
Screwing dies and dienuts -- Specification
for hand- and machine-operated circular
screwing dies for taper pipe threads; R
Series
Screwing dies and dienuts -- Specification
for hand- and machine-operated circular
screwing dies for parallel pipe threads; G
series
Screwing dies and dienuts -- Terminology
for circular screwing dies
Screwing dies and dienuts -- Specification
for dimensions of hexagon dienuts
Specification for dimensions of conduit
dies, diestocks and guides
Specification for the tapping of holes to
receive wire thread inserts (UNC and UNF
threads) -- Diameters 1/4 in and over
Specification for the tapping of holes to
receive wire thread inserts (UNC and UNF
threads) -- Diameters below 1/4 in
Expression of performance of sample
handling systems for process analyzers
Specification for rasps and engineers' files
Specification for counting trays (planchets)
for radioactive assay
Method for measurement of UV-A
radiation (black light) used in nondestructive testing
Specification for standard dimensions of
scintillators
DD 241 : Part 6 Specification for
DD 241 : Part 7
BS 5251
BS 5541
BS 5542
DD 241 : Part 7
BS 5547
BS 5548
BS 5552
BS 2064 : Part 1
BS 2064 : Part 2
BS 2064 : Part 3
BS 5868
BS 5869
BS 4481: Part 1
BS 4481: Part 2
BS 4481: Part 3
ControlNet - Part 6 : Object model
DD 241 : Part 7 Specification for
ControlNet - Part 7 : Device profiles
Specification for analogue voltage ranges
and logic levels for mains operated nuclear
instruments
Specification for dimensions of vials for
liquid scintillation counting
Specification for dimensions of test tubes
made of glass or plastics for radioactivity
measurements
DD 241 : Part 7 Specification for
ControlNet - Part 7 : Device profiles
Specification for portable bore-hole
logging equipment (down to 300 m) :
general characteristics
Specification for radiation detectors for the
instrumentation and protection of nuclear
reactors : characteristics and test methods
Code of practice for in-core
instrumentation for neutron fluence rate
(flux) measurements in power reactors
Diamond abrasive products -- Specification
for diamond and cubic boron nitride
abrasive grinding wheels
Diamond abrasive products -- Specification
for diamond abrasive circular saws and
frame saws
Diamond abrasive products -- Dimensions
of steel blades for segmented saws for
cutting of stone and masonry
Guide to ionizing radiation thickness
meters for materials in the form of sheets,
coatings or laminates
Specification for X and ç reference
radiations for calibrating dosemeters and
dose ratemeters and for determining their
response as a function of photon energy
Bonded abrasive products -- Specification
for general features of abrasive wheels,
segments, bricks and sticks
Bonded abrasive products -- Specification
for dimensions of grinding wheels and
segments
Bonded abrasive products -- Method for
assessment of static balancing of abrasive
BS 6090
BS 5367
BS 6809
BS 5587
BS 6932
BS 5831
BS 7515
BS 5851
BS 7007 : Part 1
BS 7007 : Part 2
BS 7007 : Part 3
BS 7007 : Part 5
BS 7007 : Part 6
BS 7425 : Part 4
BS 7425 : Part 1
BS 7425 : Part 2
BS 7425 : Part 3
wheels
Specification for personal photographic
dosemeters
Dimensions of coated abrasives
Method for calibration of radiometers for
use in fire testing
Specification for coated abrasives - flap
wheels with incorporated flanges or
separate flanges - designation and
dimensions
Method for measurement of the effective
focal spot size of mini-focus and microfocus X-ray tubes used for industrial
radiography
Specification for designation and
multilingual nomenclature for diamond or
cubic boron nitride grinding wheels and
saws
Radiation protection instrumentation.
Portable potential alpha energy meter for
rapid measurements in mines
Specification for grain sizes of diamond or
cubic boron nitride
Abrasive products -- Specification for
dimensions and designation of truncated
cone abrasive sleeves
Abrasive products -- Specification for
designation and dimensions of coated
abrasive flap wheels with shafts
Abrasive products -- Specification for
dimensional tolerances on non-standard
coated abrasive products
Abrasive products -- Specification for
dimensions, tolerances and designation of
abrasive belts
Specification for dimensions, tolerances
and designation of abrasive sheets
Abrasive grains -- Specification for testsieving machines
Abrasive grains -- Method for the
determination of the bulk density of
macrograins
Abrasive grains -- Method for determining
the capillarity
Abrasive grains -- Method for sampling
and splitting
BS 978 : Part 5
BS 2007
BS 2062 : Part 2
BS 2518 : Part 1
BS 2518 : Part 2
BS 4582: Part 2
BS 6710
BS 2485
BS 6466
BS 4642
BS 4309
BS 4727 : Part 2 : Group 10
BS 7509
BS 7510
BS 7684
BS 7685
BS 7688
BS 7689
BS 7699 : Part 4
BS 7690
Specification for fine pitch gears -- Hobs
and cutters
Specification for circular gear shaving
cutters, 1 to 8 metric module, accuracy
requirements
Specification foe gear bobs -- Hobs for
gears for turbine reduction and similar
drives
Specification for rotary form relieved gear
cutters -- Diametral pitch
Specification for rotary form relieved gear
cutters -- Metric module
Specification for fine pitch gears (metric
module) -- Hobs and cutters
Specification for dimensions of chain
wheel tooth forming tools
Specification for tee slots, tee bolts, tee
nuts and tenons
Code of practice for design and installation
of ceramic fibre furnace linings
Glossary of industrial furnace terms
Methods of measuring the performance of
laboratory electric resistance furnaces
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
power engineering -- Industrial
electroheating terminology
Industrial microwave heating installations.
Test methods for determination of power
output
High-frequency dielectric heating
installations. Test methods for the
determination of power output
General test conditions for industrial
electro-heating equipment
Test methods for direct arc furnaces
Test methods for electro-slag remelting
furnaces
Test methods for electroheating
installations with electron guns
Specification for safety in electroheat
installations -- Particular requirements for
arc furnace installations
Test methods for induction channel
furnaces Covers furnaces used for melting,
BS 7699 : Part 8
DD 241 : Part 8
DD 241 : Part 8
BS 7749
BS EN 60519-1
BS EN 60519-2
BS 749
BS 4966
BS 6886
BS 5046
BS EN 10052
BS 3810 : Part 1
BS 3810 : Part 2
BS 3810 : Part 3
BS 3810 : Part 4
BS 3810 : Part 5
BS 3810 : Part 6
BS 3810 : Part 7
holding and superheat. Provides a
consistent method of determining essential
parameters.
Particular requirements for electro-slag
remelting furnaces
DD 241 : Part 8 Specification for
ControlNet - Part 8 : Electronic data sheet
DD 241 : Part 8 Specification for
ControlNet - Part 8 : Electronic data sheet
Guide to test methods for batch furnaces
with metallic heating resistors
Safety in electroheat installations -General requirements
Safety in electroheat installations -Particular requirements for resistance
heating equipment
Specification for underfeed stokers
Specification for silica refractories for use
in coke ovens
Specification for alumino-silicate
refractories for use in coke ovens
Method for the estimation of equivalent
diameters in the heat treatment of steel
Vocabulary of heat treatment terms for
ferrous products
Glossary of terms used in materials
handling
Glossary of terms used in materials
handling -- Terms used in connection with
conveyors and elevators (excluding
pneumatic and hydraulic handling)
Glossary of terms used in materials
handling -- Terms used in connection with
pneumatic and hydraulic handling
Glossary of terms used in materials
handling -- Terms used in connection with
cranes
Glossary of terms used in materials
handling -- Terms used in connection with
lifting tackle
Glossary of terms used in materials
handling -- Terms used in connection with
pulley blocks
Glossary of terms used in materials
handling -- Terms used in connection with
aerial ropeways and cableways
BS 3810 : Part 8
BS 5639 : Part 1
BS 6685
BS 6913 : Part 7
BS 6914 : Part 2
BS 6914 : Part 3
BS 6914 : Part 1
BS 6914 : Part 4
BS 6914 : Part 5
BS 6914 : Part 6
BS 6914 : Part 7
BS 6914 : Part 8
BS 3130 : Part 1
BS 3130 : Part 2
BS 3130 : Part 4
Glossary of terms used in materials
handling -- Terms used in connection with
lifts, lifting platforms and inclined haulages
Fork arms for fork lift trucks -- Vocabulary
for hook-on type fork arms
Glossary of terms for loaders used for
earth-moving
Operation and maintenance of earthmoving machinery -- Glossary for machine
availability
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Glossary of terms for base
machine
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Glossary of terms for
equipment
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Glossary of terms for basic
types of earth-moving machinery
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Glossary for dumpers
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Glossary for pipelayers
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Terminology for selfpropelled crawler and wheel tractors and
their equipment
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Vocabulary, symbols and
units for machine performance
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Terminology and commercial
specifications for hydraulic excavators
Glossary of packaging terms -- General
(including auxiliary materials)
Glossary of packaging terms -- Paper and
board packaging
Glossary of packaging terms -- Metal
BS 3130 : Part 5
BS 3130 : Part 6
BS 3951 : Part 1 : Section 1.4
BS 1051
BS 2780
BS 3724
BS 4815
BS 5522
BS 5557
BS 7342
BS 7343
BS ISO 1505
BS ISO 2187
BS ISO 4921
BS ISO 8114
BS ISO 8119-3
BS ISO 8640-1
BS ISO 8640-2
BS ISO 9947
BS ISO 11224
containers and aerosols
Glossary of packaging terms -- Plastics and
flexible packaging (excluding paper)
Glossary of packaging terms -- Wooden
packaging
Freight containers -- General -- Glossary of
terminology
Glossary of terms relating to the mass
determination of textiles
Glossary of leather terms
Glossary of terms relating to fibre ropes
and cordage
Glossary of generic names for man-made
fibres
Specification for milk and milk products determination of fat content - Mojonniertype fat extraction flasks
Textile floor coverings. Vocabulary
Glossary of terms for defects in woven
fabrics
Glossary of terms for defects in knitted
fabrics
Textile machinery. Widths relating to
dyeing and finishing machines. Definitions
and range of nominal widths
Spinning preparatory machinery, spinning
and doubling (twisting) machinery. List of
equivalent terms
Knitting. Basic concepts. Vocabulary
Textile machinery and accessories.
Spindles for ring-spinning and doubling
machines. List of equivalent terms
Textile machinery and accessories. Needles
for knitting machines. Terminology -Compound needles
Textile machinery and accessories. Flat
warp knitting machines. Vocabulary -Driving mechanisms, supports and knitting
elements
Textile machinery and accessories. Flat
warp knitting machines. Vocabulary -Warp let-off, fabric take-up and batching
Textile machinery and accessories. Twofor-one twisters. Vocabulary
Textiles. Nonwovens. Web formation and
bonding. Vocabulary
BS EN 29092
BS 1903
BS 1831 : Part 1
BS 4440
BS 5381 : Part 5
BS 5545 : Part 1
BS 5551 : Part 1 : Section 1.1
BS 5551 : Part 1 : Section 1.2
BS 5551 : Part 1 : Section 1.3
BS 6355
BS 6916 : Part 1
BS 7562 : Part 1
BS 7683
BS 5098
BS 5456
BS 5939
BS 6325
BS 6406
BS 6860
BS 2474
BS 3282
BS 6711 : Part 1
BS 3618 : Section 1
BS 3618 : Section 10
Textiles. Nonwovens. Definition
Glossary of terms used by the clothing
industry
Common names for pesticides -- Guide to
principles for selection of common names
Glossary of basic terms for fishing nets
Methods for determination of physical
properties of tobacco and tobacco products
-- Draw resistance of cigarettes and filter
rods
Milking machine installations -- Glossary
of terms
Fertilizers -- Terminology and labelling -Classification
Fertilizers -- Terminology and labelling -Glossary of terms
Fertilizers -- Terminology and labelling -Specification for marking of containers
(packages, drums, etc.) and labels
Glossary of terms for equipment for crop
protection
Chain saws -- Glossary of terms
Planning, design and installation of
irrigation schemes -- Glossary of terms
Guide to defects of green coffee
Glossary of terms relating to sensory
analysis
Glossary of terms relating to coffee and its
products
Glossary of terms for cereals and cereal
products
Glossary of terms relating to black tea
Nomenclature for oilseeds
Nomenclature for cereals, pulses and other
food grains
Recommendations for names for chemicals
used in industry
Glossary of terms relating to gas
chromatography
Vocabulary relating to laboratory apparatus
made essentially from glass, porcelain or
vitreous silica -- Names for items of
apparatus
Glossary of mining terms Planning and
surveying
Glossary of mining terms Transport
BS 3618 : Section 11
BS 3618 : Section 2
BS 3618 : Section 3
BS 3618 : Section 4
BS 3618 : Section 5
BS 3618 : Section 6
BS 3618 : Section 7
BS 3618 : Section 8
BS 3618 : Section 9
BS 6127 : Part 1
BS 6907 : Part 1
BS 1179
BS 3323
BS 3552
BS 2737
BS 2955
BS 6918
BS 6931
BS EN 10001
BS EN 10020
BS EN 10079
BS EN 23134-1
BS EN 23134-2
BS EN 23134-3
BS EN 23134-4
BS EN 313-1
Glossary of mining terms Strata control
Glossary of mining terms Ventilation
Glossary of mining terms Boring and
exploration
Glossary of mining terms Drainage
Glossary of mining terms Geology
Glossary of mining terms Drilling and
blasting
Glossary of mining terms Electrical
engineering and lighting
Glossary of mining terms Winning and
working
Glossary of mining terms Shafts and
associated equipment
Petrographic analysis of bituminous coal
and anthracite -- Glossary of terms relating
to the petrographic analysis of bituminuous
coal and anthracite
Electrical installations for open-cast mines
and quarries -- Glossary
Glossary of terms used in the gas industry
Glossary of terms relating to sampling,
testing and analysis of solid mineral fuels
Glossary of coal preparation terms
Terminology of internal defects in castings
as revealed by radiography
Glossary of terms relating to particle
technology
Glossary of terms for corrosion of metals
and alloys
Glossary of terms for copper and copper
alloys
Definition and classification of pig-irons
Definition and classification of grades of
steel
Definition of steel products
Light metals and their alloys. Terms and
definitions -- Materials
Light metals and their alloys. Terms and
definitions -- Unwrought products
Light metals and their alloys. Terms and
definitions -- Part 3. Wrought products
Light metals and their alloys. Terms and
definitions -- Castings
Plywood. Classification and terminology --
BS EN 313-2
BS EN 633
BS EN 844-1
BS EN 844-3
BS 4261
BS 4361 : Part 0
BS 4361 : Part 40
BS 6100 : Part 4 : Section 4.1
BS 6100 : Part 4 : Section 4.2
BS 6100 : Part 4 : Section 4.3
BS 6100 : Part 4 : Section 4.4
BS 6100 : Part 4 : Section 4.5
BS 6566 : Part 2
BS 7359
BS 952 : Part 2
BS 3446 : Part 1
BS 3446 : Part 2
BS 3446 : Part 3
BS 3447
Classification
Plywood. Classification and terminology -Terminology
Cement-bonded particleboards. Definition
and classification
Round and sawn timber. Terminology. -General terms common to round timber
and sawn timber
Round and sawn timber. Terminology. -General terms relating to sawn timber
Glossary of terms relating to timber
preservation
Woodworking machines -- Classification
of woodworking machines and auxiliary
machines used for woodworking
Woodworking machines -- Nomenclature
for lifting tables and stages
Glossary of building and civil engineering
terms -- Forest products -- Characteristics
and properties of timber and wood based
panel products
Glossary of building and civil engineering
terms -- Forest products -- Sizes and
quantities of solid timber
Glossary of building and civil engineering
terms -- Forest products -- Wood based
panel products
Glossary of building and civil engineering
terms -- Forest products -- Carpentry and
joinery
Glossary of building and civil engineering
terms -- Forest products -- Cork
Plywood -- Glossary of terms
Nomenclature of commercial timbers
including sources of supply
Glass for glazing -- Terminology for work
on glass
Glossary of terms associated with
refractory materials -- General and
manufacturing
Glossary of terms associated with
refractory materials -- Applications in the
coke, glass, cement and other nonmetallurgical industries
Applications in the metallurgical industries
Glossary of terms used in the glass industry
BS 6100 : Part 1 : Section 1.4 : Subsection
1.4.1
BS 1755 : Part 1
BS 1755 : Part 2
BS 2782 : Part 9 : Method 940A
BS 3558
BS 6138
BS 7442 : Part 1
BS 3203
BS 6456
BS ISO 472
BS 1248 : Part 1
BS 2655 : Part 9
BS 3533
BS 5643
BS 6100 : Part 0
BS 6100 : Part 1 : Section 1.0
BS 6100 : Part 1 : Section 1.1
BS 6100 : Part 1 : Section 1.2
BS 6100 : Part 1 : Section 1.6
BS 6100 : Part 1 : Section 1.8
BS 6100 : Part 2 : Section 2.1
Glossary of building and civil engineering
terms -- General and miscellaneous -Materials -- Glazing
Glossary of terms used in the plastics
industry -- Polymer and plastics technology
Glossary of terms used in the plastics
industry -- Manufacturing processes
Methods of testing plastics -- Sampling and
test specimen preparation -- Preparation of
test specimens of amorphous
thermoplastics in the form of bars with a
specified reversion
Glossary of rubber terms
Glossary of terms used in the adhesives
industry
Glossary of terms
Glossary of paper, board, pulp and related
terms
Glossary of terms for correspondence
envelopes
Plastics. Vocabulary
Wallcoverings in roll form -- Terms and
symbols
Specification for lifts, escalators, passenger
conveyers and pateruosters -- Definitions
Glossary of thermal insulation terms
Glossary of refrigeration, heating,
ventilating and air-conditioning terms
Glossary of building and civil engineering
terms -- Introduction
Glossary of building and civil engineering
terms -- General and miscellaneous -General
Glossary of building and civil engineering
terms -- General and miscellaneous -Types of building
Glossary of building and civil engineering
terms -- General and miscellaneous -Spaces
Glossary of building and civil engineering
terms -- General and miscellaneous -Persons
Glossary of building and civil engineering
terms -- General and miscellaneous -Environment and physical planning
Glossary of building and civil engineering
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.0
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.1
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.2
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.3
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.4
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.5
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.6
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.7
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.8
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.1
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.2
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.3
terms -- Civil engineering -- Structural
design and elements
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- External works
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Walls and
cladding
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Roofs and roofing
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Floors and ceilings
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Stairs and
circulation elements
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Doors, windows
and openings
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Jointing products,
builders' hardware and accessories
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Finishes
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Signs and signing
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Coordination of dimensions; tolerances
and accuracy
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Jointing
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Setting out and measurement
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.5
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.6
BS 6100 : Part 2 : Section 2.3
BS 6100 : Part 2 : Section 2.5
BS 6100 : Part 2 : Section 2.6
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.7
BS 6100 : Part 1 : Section 1.7 : Subsection
1.7.1
BS 6100 : Part 1 : Section 1.7 : Subsection
1.7.2
BS 6100 : Part 2 : Section 2.2 : Subsection
2.2.1
BS 6100 : Part 2 : Section 2.2 : Subsection
2.2.2
BS 6100 : Part 2 : Section 2.2 : Subsection
2.2.3
BS 6100 : Part 2 : Section 2.4 : Subsection
2.4.1
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Plant and equipment
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Documentation excluding drawings
Glossary of building and civil engineering
terms -- Civil engineering -Superstructures. Bridges. Large span
structures
Glossary of building and civil engineering
terms -- Civil engineering -- Hydraulic
engineering and construction work
Glossary of building and civil engineering
terms -- Civil engineering -- Natural
waters. Inland. Coastal. Marine
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Drawings
Glossary of building and civil engineering
terms -- General and miscellaneous -Characteristics and performance -Performance
Glossary of building and civil engineering
terms -- General and miscellaneous -Characteristics and performance -Characteristics
Glossary of building and civil engineering
terms -- Civil engineering -- Substructures.
Earthworks. Foundations. Tunnels -Earthworks
Glossary of building and civil engineering
terms -- Civil engineering -- Substructures.
Earthworks. Foundations. Tunnels -Substructures and foundations
Glossary of building and civil engineering
terms -- Civil engineering -- Substructures.
Earthworks. Foundations. Tunnels -Tunnels
Glossary of building and civil engineering
terms -- Civil engineering -- Highway,
railway and airport engineering -- Highway
engineering
BS 6100 : Part 2 : Section 2.4 : Subsection
2.4.2
BS 6100 : Part 2 : Section 2.4 : Subsection
2.4.3
BS 6100 : Part 2 : Section 2.7
BS 6100 : Part 2 : Section 2.8
BS 6100 : Part 3 : Section 3.1
BS 6100 : Part 3 : Section 3.2 : Subsection
3.2.1
BS 6100 : Part 3 : Section 3.2 : Subsection
3.2.2
BS 6100 : Part 3 : Section 3.3
BS 6100 : Part 3 : Section 3.4
BS 6100 : Part 5 : Section 5.1
BS 6100 : Part 5 : Section 5.2
BS 6100 : Part 5 : Section 5.3
BS 6100 : Part 6 : Section 6.1
BS 6100 : Part 6 : Section 6.2
BS 6100 : Part 6 : Section 6.3
BS 6100 : Part 6 : Section 6.4
BS 6100 : Part 6 : Section 6.5
BS 6100 : Part 6 : Section 6.6 : Subsection
6.6.1
Glossary of building and civil engineering
terms -- Civil engineering -- Highway,
railway and airport engineering -- Railway
engineering
Glossary of building and civil engineering
terms -- Civil engineering -- Highway,
railway and airport engineering -- Airport
engineering
Glossary of building and civil engineering
terms -- Civil engineering -- Public health.
Environmental engineering
Glossary of building and civil engineering
terms -- Civil engineering -- Pipelines and
ducts
Glossary of building and civil engineering
terms -- Services -- Energy sources and
distribution
Glossary of building and civil engineering
terms -- Services -- Internal communication
and transport -- Internal communication
Glossary of building and civil engineering
terms -- Services -- Internal communication
and transport -- Internal transport
Glossary of building and civil engineering
terms -- Services -- Sanitation
Glossary of building and civil engineering
terms -- Services -- Lighting
Glossary of building and civil engineering
terms -- Masonry -- Terms common to
masonry
Glossary of building and civil engineering
terms -- Masonry -- Stone
Glossary of building and civil engineering
terms -- Masonry -- Bricks and blocks
Glossary of building and civil engineering
terms -- Concrete and plaster -- Binders
Glossary of building and civil engineering
terms -- Concrete and plaster -- Concrete
Glossary of building and civil engineering
terms -- Concrete and plaster -- Aggregates
Glossary of building and civil engineering
terms -- Concrete and plaster -- Admixtures
Glossary of building and civil engineering
terms -- Concrete and plaster -- Formwork
Glossary of building and civil engineering
terms -- Concrete and plaster -- Products,
BS 6100 : Part 6 : Section 6.6 : Subsection
6.6.2
BS 6953
BS EN 26927
BS EN 40-1
BS 2005
BS ISO 8229
BS 376 : Part 1
BS 376 : Part 2
BS 442
BS 469
BS 519
BS 561
BS 581
BS 714
BS 1659
BS 1745
BS 3347
BS 3682 : Part 1
BS 3711
applications and operations -- Concrete and
mortar
Glossary of building and civil engineering
terms -- Concrete and plaster -- Products,
applications and operations -- Plaster
Glossary of terms for procedures for setting
out, measurement and surveying in
building construction (including guidance
notes)
Building construction. Jointing products.
Sealants. Vocabulary
Lighting columns -- Definitions and terms
Glossary of terms for fillings for bedding,
upholstery and other domestic articles
Operations and baths relating to drycleaning machines. Vocabulary
Railway signaling symbols -- Schematic
symbols
Railway signaling symbols -- Wiring
symbols and written circuits
Specification for terminals for electrical
apparatus for railway signalling purposes
Specification for railway signaling lamps
Specification for tractive armature direct
current neutral-polar line relays for railway
signaling
Specification for alternating-current line
relays double-element 3-position (for
railway signaling)
Specification for electrically-driven pointoperating machines for railways
Specification. Cartridge fuse-links for use
in railway-signalling circuits
Specification for tractive armature direct
current neutral track and line relays for
railway signalling
Specification for alternating-current relays
for railway signaling : track relays (doubleelement, 2-position), line relays (singleelement, 2-position)
Specification for capacitors for railway
signalling track circuits
Specification for railway brake hose -Specification for compressed air brake hose
Specification for railway vacuum brake
cylinders, rolling ring type
BS 3818
BS 5892 : Part 1
BS 5892 : Part 2
BS 5892 : Part 4
BS 5892 : Part 5
BS 5892 : Part 6
BS 4581: Part 2
BS 6853
BS 11
BS 47 : Part 1
BS 64
BS 456
BS 500
BS 751
BS 4521 : Part 2
BS 4521 : Part 3 : Section 3.1
BS 4521: Part 1: Section 1.1
Specification for self-sealing fuelling
couplings for diesel locomotives and diesel
railcars
Railway rolling stock materials -Specification for axles for traction and
trailing stock
Railway rolling stock materials -Specification for forged and rolled wheel
centres
Railway rolling stock materials -Specification for forged and rolled tyres
Railway rolling stock materials -Specification for steel bars for retaining
rings for tyred wheels
Railway rolling stock materials -Specification for wheelsets for traction and
trailing stock
Flanges for mounting grinding wheels on
grinding machine tools Specification for
dimensions and materials of flanges for
grinding wheels of less than 76.2 mm bore
Code of practice for fire precautions in the
design and construction of railway
passenger rolling stock
Specification for railway rails
Fishplates for railway rails -- Specification
for rolled steel fishplates
Specification for normal and high strength
steel bolts and nuts for railway rail
Specification for dimensions of track
circuit insulation
Specification for steel railway sleepers for
flat bottom railway rails
Specification for steel baseplates for flat
bottom railway rails
Specification for railway turnouts for
private users -- Light grade turnouts over
which British Railways locomotives do not
operate, for axle loads not exceeding 10
tons, using fiat bottom rails
Specification for railway turnouts for
private users -- Medium grade turnouts
over which British Railways locomotives
do not operate, for axle loads not exceeding
25 tons -- Turnouts using bull head rail
Specification for railway turnouts for
BS 4521: Part 3: Section 3.2
BS 4521: Part 1: Section 1.2
BS 4521: Part 4
BS 1802
BS 3425
BS 3539
BS 4464
BS 5956
BS 6086
BS 6765 : Part 3
BS 6862 : Part 1
BS EN 24165
BS 3648
BS 6873
BS 5409 : Part 1
BS 5409 : Part 2
private users -- Turnouts over which
British Railways locomotives operate -Turnouts using bull head rails
Specification for railway turnouts for
private users -- Medium grade turnouts
over which British Railways locomotives
do not operate, for axle loads not exceeding
25 tons -- Turnouts using flat bottom rails
Specification for railway turnouts for
private users -- Turnouts over which
British Railways locomotives operate -Turnouts using flat bottom rail
Specification for railway turnouts for
private users -- Heavy grade turnouts over
which British Railways locomotives do not
operate, for axle loads which may exceed
25 tons, using flat bottom rails
Specification for steel spring washers for
general engineering and automobile
purposes
Method for the measurement of noise
emitted by motor vehicles
Specification for sound level meters for the
measurement of noise emitted by motor
vehicles
Specification for spring washers for general
engineering and automobile purposes.
Metric series
Specification for A6-size microfiche for the
motor industry
Method of measurement of noise inside
motor vehicles
Leisure accommodation vehicles : caravans
-- Specification for 12 V direct current
extra low voltage electrical installations
Specification for cables for vehicles -Cables with copper conductors
Road vehicles. Electrical connections.
Double-pole connector
Specification for cycle rear lamps
Specification for filament lamps for cycles
Specification for nylon tubing -- Fully
plasticized nylon tubing types 11 and 12
for use primarily in pneumatic installations
Specification for nylon tubing -- Plasticized
and unplasticized nylon tubing types 11
BS 3092
DD 241 : Part 9
BS 6765 : Part 4
BS 3254 : Part 1
BS 3254 : Part 2
BS EN 29318-2
BS EN 29318-3
DD 241 : Part 9
BS EN 29318-4
DD 208
DD 209
DD 212
BS 2806
BS 7226
BS 7525
and 12 for use primarily in the automobile
industry
Specification for main friction clutches,
main power-take-off assemblies and
associated attachments for internal
combustion engines
DD 241 : Part 9 Specification for
ControlNet - Part 9 : Station management
Leisure accommodation vehicles: caravans
-- Specification for undergear
Seat belt assemblies for road vehicles -Specification for restraining devices for
adults
Seat belt assemblies for road vehicles -Specification for restraining devices for
children
Information technology. Intelligent
Peripheral Interface -- Device specific
command set for magnetic disk drives
Information technology. Intelligent
Peripheral Interface -- Device generic
command set for magnetic and optical disk
drives
DD 241 : Part 9 Specification for
ControlNet - Part 9 : Station management
Information technology. Intelligent
Peripheral Interface -- Device generic
command set for magnetic tape drives
Piston rings up to 200 mm diameter for
reciprocating internal combustion engines :
specification for rectangular rings with
narrow ring width
Piston rings up to 200 mm diameter for
reciprocating internal combustion engines :
specification for half keystone rings
Piston rings up to 200 mm diameter for
reciprocating internal combustion engines.
Specification for expander/segment oil
control rings
Specification for limiting dimensions of air
filters for internal combustion engines and
compressors other than for aircraft
Methods of test for performance of inlet air
cleaning equipment for internal combustion
engines and compressors
Specification for flammability of air
BS 2952
BS 7038
BS 4552 : Part 1
BS 4552 : Part 2
BS 4552 : Part 3
BS ISO 8789
BS AU 209 : Part 7
BS EN 29367-1
BS EN 29367-2
BS 4626
BS 5482 : Part 2
BS EN ISO 9241-8
BS 5601 : Part 4
BS 6762 : Part 2
cleaner elements for internal combustion
engines
Specification for rubber hose for i.c. engine
cooling systems
Specification for rubber coolant hoses and
tubing for use on private cars and light
commercial vehicles
Fuel filters, strainers and sedimentors for
compression-ignition engines -- Methods
of test
Fuel filters, strainers and sedimentors for
compression-ignition engines -- Method of
classification
Fuel filters, strainers and sedimentors for
compression-ignition engines -Specification for mounting and connecting
dimensions of spin-on fuel filters
Rubber hoses and hose assemblies for
liquefied petroleum gas in motor vehicles.
Specification
Vehicle security -- Specification for
locking systems for good vehicle driver's
compartments
Lashing and securing arrangements on road
vehicles for sea transportation on Ro/Ro
ships. General requirements -- Commercial
vehicles and combinations of vehicles,
semi-trailers excluded
Lashing and securing arrangements on road
vehicles for sea transportation on Ro/Ro
ships. General requirements -- Semi-trailers
Specification for touring trailer caravans
Domestic butane- and propane-gas-burning
installations -- Installations in caravans and
non-permanent dwellings
BS EN ISO 9241-8 Ergonomic
requirements for office work with visual
display terminals (VDTs) - Part 8 :
Requirements for displayed colours
Code of practice for ventilation and heating
of caravans -- Installation of electrical
heating appliances
Services for leisure accommodation
vehicles and transportable accommodation
units -- Code of practice for the installation
of solid fuel fired heating in park homes
BS 6764
BS EN 27418
BS 1727
BS EN ISO 9241-8
BS 3214
BS 1717
BS 7615
BS 6102 : Part 4
BS 6102 : Part 1
BS 6102 : Part 10
BS 6102 : Part 11
BS 6102 : Part 12
BS 6102 : Part 13
BS 6102 : Part 14
BS 6102 : Part 15
BS 6102 : Part 2
BS 6102 : Part 3
BS 6102 : Part 7
BS 6102 : Part 8
BS 6102 : Part 9
and transportable accommodation units
Specification for habitation and stability
requirements for leisure accommodation
vehicles: leisure homes
Leisure accommodation vehicles.
Vocabulary
Specification for motors for battery
operated vehicles
BS EN ISO 9241-8 Ergonomic
requirements for office work with visual
display terminals (VDTs) - Part 8 :
Requirements for displayed colours
Specification for locking connectors for
battery operated vehicles (320 ampere
rating)
Specification for steel tubes for cycle and
motor cycle purposes
Specification for motor cycle chains
Cycles -- Glossary of terms
Cycles -- Specification for safety
requirements for bicycles
Cycles -- Specification for screw threads
used to assemble head fittings on bicycle
forks
Cycles -- Specification for assembly
dimensions for stem and handlebar bend
Cycles -- Specification for stem wedge
angle
Cycles -- Specification for mating
dimensions for splined hub and sprocket
Cycles -- Specification for dimensions of
bottom bracket axle and crank assembly
with square end fittings
Cycles -- Specification for dimensions of
spoke nipples
Cycles -- Specification for photometric and
physical requirements of reflective devices
Cycles -- Specification for photometric and
physical requirements of lighting
equipment
Cycles -- Specification for cotter pins and
assembly of the axle/cotter pin/crank
Cycles -- Specifications for screw threads
used to assemble freewheels on bicycle
hubs.
Cycles -- Specification for screw threads
BS ISO 11243
BS 1622
BS 4613 : Part 1
BS 4613 : Part 2
BS 4613 : Part 3
BS 6913 : Part 4
BS 6913 : Part 5
BS 5609
BS 6349 : Part 1
BS 6349 : Part 2
BS 6349 : Part 3
BS 6349 : Part 4
BS 6349 : Part 6
BS 6349 : Part 7
BS 6632
BS 6633
BS 7466
BS 7467
BS 7473
BS 7544
PD 6430
used in bottom bracket assemblies
Cycles. Luggage carriers for bicycles.
Concepts, classification and testing
Specification for spreaders for winter
maintenance
Specification for tyre pressure gauges -Indicating plunger portable type
Specification for tyre pressure gauges -Dial portable type
Specification for tyre pressure gauges -Inflation gauges for road vehicles
Operation and maintenance of earthmoving machinery -- Recommendations
for service instrumentation
Operation and maintenance of earthmoving machinery -- Specification for
diagnostic ports
Specification for printed pressure-sensitive,
adhesive-coated labels for marine use,
including requirements for label base
material
Maritime structures -- General criteria
Maritime structures -- Design of quay
walls, jetties and dolphins
Maritime structures -- Design of dry docks,
locks, slipways and shipbuilding berths,
shiplifts and dock and lock gates
Maritime structures -- Code of practice for
design of fendering and mooring systems
Maritime structures -- Design of inshore
moorings and floating structures
Maritime structures -- Guide to the design
and construction of breakwaters
Method for measurement and reporting of
shipboard vibration data
Method for measurement and reporting of
local vibration data of ship structures and
equipment
Specification for dredgers
Specification for symbols for computer
applications in ship building and marine
technology
Glossary of terms for dredgers
Method for graphical presentation of the
complex modulus of damping materials
The adoption of the metric system in the
BS 7465
PD 6430/1
BS 7469 : Part 1
BS 7470
BS EN 790
BS 1170
BS 1807
BS 7464
BS 7471
BS 4263
BS 4268
BS 7160
BS 1597
BS 5260
BS 6883
BS 7027
BS 7163
marine industry : report, basic programme
and guide
Glossary of terms for ships windows and
side scuttles
Extract (appendices A and B) from PD
6430 : The adoption of the metric system in
the marine industry : report, basic
programme and guide. Units of the SI, their
application and use in the marine industry
Specification for windows and side scuttles
for fire-resistant constructions -- B class
divisions
Specification for clear-view screens for use
in ships
Inland navigation vessels. Stairs with
inclination angles of 45ø to 60ø.
Requirements, types
Recommendations for treatment of water
for marine boilers
Specification for marine main propulsion
gears and similar drives : metric module
Specification for anchor winches for
mobile offshore units
Specification for mooring winches
Specification for the marking of hatchway
beams
Specification for the marking of wooden
hatchway covers
Specification for anchor chains for small
craft
Specification for limits and methods of
measurement of electromagnetic
interference generated by marine
equipment and installations
Code of practice for radio interference
suppression on marine installations
Specification for elastomer insulated cables
for fixed wiring in ships and on mobile and
fixed offshore units
Specification for limits and methods of
measurement of the immunity of marine
electrical and electronic equipment to
conducted and radiated electromagnetic
interference
Specification for wire rope and pulley
steering systems on small craft
BS EN ISO 8468
BS EN ISO 10592
BS EN 929
BS EN 60872
BS EN ISO 11683
BS EN ISO 11683
BS ISO 10006
BS 7162
BS 3273
BS 7550 : Part 1
BS 5381 : Part 8
BS EN 61097-1
DD 221
BS EN ISO 8442-1
BS EN ISO 8442-1
BS 7550 : Part 2
Ship's bridge layout and associated
equipment. Requirements and guidelines
Small craft. Hydraulic steering systems
Inland navigation vessels. Push-tows.
Mounting attachment for demountable
signal masts
Marine automatic radar plotting aids
(ARPA). Operational requirements.
Methods of testing and test results
BS EN ISO 11683 Packaging - Tactile
warnings of danger - Requirements
BS EN ISO 11683 Packaging - Tactile
warnings of danger - Requirements
BS ISO 10006 Quality management Guidelines to quality in project
management
Specification for waste water fittings on
yachts
Specification for distant indicating
thermometers for ships' refrigerated cargo
spaces
Calibration of spherical tanks for
refrigerated light-hydrocarbon fluids in
ships -- Method of stereo-photogrammetry
BS 5381 : Part 8 Methods for
determination of physical properties of
tobacco and tobacco products - Part 8 :
Loss of tobacco from cigarette ends using a
rotating cubic box (sismelatophore)
Global maritime distress and safety system
(GMDSS) -- Radar transponder. Marine
search and rescue (SART). Operational and
performance requirements, methods of
testing and required test results
DD 221 General guidance for the marking
of gas appliances
BS EN ISO 8442-1 Materials and articles
in contact with foodstuffs - Cutlery and
table holloware - Part 1 : Requirements for
cutlery for the preparation of food
BS EN ISO 8442-1 Materials and articles
in contact with foodstuffs - Cutlery and
table holloware - Part 1 : Requirements for
cutlery for the preparation of food
Calibration of spherical tanks for
refrigerated light-hydrocarbon fluids in
BS 5396
BS 6634
BS 4422 : Part 9
BS 7472
BS EN 22922
BS EN 526
BS 4224
BS 4474
BS 5482 : Part 3
BS 7161
BS 7828 : Part 1
BS EN ISO 4566
BS EN ISO 7840
BS EN ISO 8469
BS EN ISO 9097
BS EN ISO 11547
BS EN 28846
BS EN 28848
BS EN 28849
BS EN 29775
BS 185 : Index
BS 185 : Section 1
ships -- Triangulation method
Specification for seamless steel CO2
containers for fixed fire-fighting
installations on ships
Guide for overall evaluation of vibration in
merchant ships
Glossary of terms associated with fire -Marine terms
Classification for shipborne barges of all
series
Acoustics. Measurement of noise emitted
by vessels on inland water-ways and
harbours
Inland navigation vessels. Gangways with
a length not exceeding 8 m. Requirements,
types
Specification for yachtsmen's safety
harnesses and safety lines
Specification for safety harnesses and
safety lines for use by children in yachts
Domestic butane- and propane-gas-burning
installations -- Installations in boats, yachts
and other vessels
Specification for propeller shaft ends and
bosses for inboard-engined pleasure craft
Small craft. Seacocks and through-hull
fittings -- Metallic
Small craft with inboard engine. Propeller
shaft ends and bosses with 1 : 10 taper
Small craft. Fire resistant fuel hoses
Small craft. Non-fire-resistant fuel hoses
Small craft. Electric fans
Small craft. Start-in-gear protection
Small craft. Electrical devices. Protection
against ignition of surrounding flammable
gases
Small craft. Remote steering systems
Small craft. Electrically operated bilgepumps
Small craft. Remote steering systems for
single outboard motors of 15 kW to 40 kW
power
Glossary of aeronautical and astronautical
terms -- Alphabetical index
Glossary of aeronautical and astronautical
terms -- General
BS 185 : Section 10
BS 185 : Section 13
BS 185 : Section 14
BS 185 : Section 15
BS 185 : Section 16
BS 185 : Section 17
BS 185 : Section 18
BS 185 : Section 2
BS 185 : Section 3
BS 185 : Section 4
BS 185 : Section 5
BS 185 : Section 6
BS 185 : Section 7
BS 185 : Section 8
BS 185 : Section 9
BS 5331
BS 5721
BS EN 2000
BS EN 3042
BS EN 61265
Glossary of aeronautical and astronautical
terms -- Auxiliary services
Glossary of aeronautical and astronautical
terms -- Air-traffic and ground services
Glossary of aeronautical and astronautical
terms -- Radiocommunication and
radiolocation
Glossary of aeronautical and astronautical
terms -- Meteorology
Glossary of aeronautical and astronautical
terms -- Personnel
Glossary of aeronautical and astronautical
terms -- Aerospace medicine
Glossary of aeronautical and astronautical
terms -- Astronautics
Glossary of aeronautical and astronautical
terms -- Motion of aircraft
Glossary of aeronautical and astronautical
terms -- Structures
Glossary of aeronautical and astronautical
terms -- Aerodynamics
Glossary of aeronautical and astronautical
terms -- Heavier-than-air aircraft
(aerodynes)
Glossary of aeronautical and astronautical
terms -- Ballistic and guided missiles
Glossary of aeronautical and astronautical
terms -- Lighter-than-air aircraft (aerostats)
Glossary of aeronautical and astronautical
terms -- Power plant
Glossary of aeronautical and astronautical
terms -- Propellers
Method of test for measurement of the
physical properties of sonic bangs
Specification for frequency weighting for
the measurement of aircraft noise (Dweighting)
Quality assurance. EN aerospace products.
Approval of the quality system of
manufacturers
Quality assurance. EN aerospace products.
Qualification procedure
Electroacoustics. Instruments for
measurement of aircraft noise. Performance
requirements for systems to measure onethird-octave band sound pressure levels in
BS EN 2536
BS EN 2574
BS EN 2828
BS EN 2829
BS EN 2830
BS EN 3212
BS 185 : Section 3
BS EN 2155-2
BS EN 2155-3
BS EN 2155-13
BS EN ISO 8442-3
BS EN ISO 8442-3
BS EN ISO 8442-4
BS EN 2155-14
BS EN 2851
BS 185 : Section 8
noise certification of transport-category
aircraft
Hard anodizing of aluminium alloys
Specification for welds. Information on
drawings
Adhesion test for metallic coatings by
burnishing
Adhesion test for metallic coatings by shot
peening
Adhesion test for metallic coatings by
shearing action
Paints and varnishes. Corrosion test by
alternate immersion in a buffered sodium
chloride solution
Glossary of aeronautical and astronautical
terms -- Structures
Specification for test methods for
transparent materials for aircraft glazing -Determination of water absorption
Specification for test methods for
transparent materials for aircraft glazing -Determination of refractive index
Specification for test methods for
transparent materials for aircraft glazing -Determination of temperature at deflection
under load
BS EN ISO 8442-3 Materials and articles
in contact with foodstuffs - Cutlery and
table holloware - Part 3 : Requirements for
silver-plated table and decorative holloware
BS EN ISO 8442-3 Materials and articles
in contact with foodstuffs - Cutlery and
table holloware - Part 3 : Requirements for
silver-plated table and decorative holloware
BS EN ISO 8442-4 Materials and articles
in contact with foodstuffs - Cutlery and
table holloware - Part 4 : Requirements for
gold-plated cutlery
Specification for test methods for
transparent materials for aircraft glazing -Determination of the 1/10 Vicat softening
temperature
Marking of parts and assemblies other than
engines. Indications on drawings
Glossary of aeronautical and astronautical
terms -- Power plant
BS 185 : Section 9
BS EN 2282
BS EN 2350
BS EN 2495
BS EN ISO 8442-4
BS EN 2591
BS EN 2592
BS EN 60952-1
BS EN 60952-2
BS EN 60952-3
BS 185 : Section 10
BS EN 2328
BS EN 2348
BS EN 2357
BS EN 2358
BS EN 2359
BS EN 2360
BS EN 2361
BS EN 2362
Glossary of aeronautical and astronautical
terms -- Propellers
Characteristics of aircraft electrical
supplies
Circuit breakers. Technical specification
Specification for single-pole circuit
breakers, temperature compensated, rated
currents up to 25 A. Product standard
BS EN ISO 8442-4 Materials and articles
in contact with foodstuffs - Cutlery and
table holloware - Part 4 : Requirements for
gold-plated cutlery
Elements of electrical and optical
connection. Test methods. General
Specification for three-pole circuit
breakers, temperature compensated, rated
currents up to 25 A. Product standard
Aircraft batteries -- General test
requirements and performance levels
Aircraft batteries -- Design and
construction requirements
Aircraft batteries -- External electrical
connectors
Glossary of aeronautical and astronautical
terms -- Auxiliary services
Specification for washers, tab for flight
control rods. Dimensions
Specification for control cable assemblies.
Technical specification
Specification for stud-ends in corrosion
resisting steel swaged on type, control
cable. Dimensions and loads
Specification for eye-ends in corrosion
resisting steel swaged on type, control
cable. Dimensions and loads
Specification for fork-ends in corrosion
resisting steel swaged on type, control
cable. Dimensions and loads
Specification for fork-ends for rolling
bearings in corrosion resisting steel swaged
on type, control cable. Dimensions and
loads
Specification for ball-ends, double shank in
corrosion resisting steel swaged on type,
control cable. Dimensions and loads
Specification for ball-ends in corrosion
BS EN 2641
BS 185 : Section 14
BS 185 : Section 13
BS 3224 : Part 1
BS 3224 : Part 4
BS ISO 9370
BS EN ISO 7250
BS 3224 : Part 5
BS 3224 : Part 6
BS 185 : Section 18
BS EN 2032-2
BS EN 60947-5-4
BS 903 : Part A37
BS EN 61674
BS EN 2078
BS EN 2089
resisting steel swaged on type, control
cable. Dimensions and loads
Specification for control cable assemblies.
Combinations and dimensions
Glossary of aeronautical and astronautical
terms -- Radiocommunication and
radiolocation
Glossary of aeronautical and astronautical
terms -- Air-traffic and ground services
Lighting fitting for civil land aerodromes -Specification for lighting units for use in
precision approach path indicator systems
Lighting fitting for civil land aerodromes -Specification for elevated lighting units
BS ISO 9370 Plastics - Instrumental
determination of radiant exposure in
weathering tests - General guidance and
basic test method
BS EN ISO 7250 Basic human body
measurements for technological design
Lighting fitting for civil land aerodromes -Specification for inset lighting units
Lighting fitting for civil land aerodromes -Specification for obstacle lighting units
Glossary of aeronautical and astronautical
terms -- Astronautics
Metallic materials -- Coding of
metallurgical condition in delivery
condition
BS EN 60947-5-4 Low-voltage switchgear
and controlgear - Part 5 : Control circuit
devices and switching elements - Section 4
: Methods of assessing the performance of
low energy contacts - Special tests
BS 903 : Part A37 Physical testing of
rubber - Part A37 : Determination of
tendency to adhere to and to corrode metals
BS EN 61674 Medical electrical equipment
- Dosimeters with ionization chambers
and/or semi-conductor detectors as used in
X-ray diagnosis imaging
Metallic materials. Manufacturing
schedule. Inspection schedule. Inspection
and test report. Description and rules for
use
Aluminium alloy AL-P2014A-T6 or T62.
BS EN 2101
BS EN 2128
BS EN 61674
BS EN 1792
BS EN 1792
BS EN ISO 9241-17
BS EN ISO 9241-17
BS EN ISO 9241-11
BS EN ISO 9241-11
BS EN ISO 9241-15
BS EN ISO 9241-15
BS EN 2284
BS EN 2318
BS EN 2326
BS EN 2381
Sheet and strip 0,4 mm ó a ó 6 mm
Specification for chromic acid anodizing of
aluminium and wrought aluminium alloys
Aluminium alloy AL-P7075-T7351. Drawn
bars 6 mm ó a or D ó 75 mm
BS EN 61674 Medical electrical equipment
- Dosimeters with ionization chambers
and/or semi-conductor detectors as used in
X-ray diagnosis imaging
BS EN 1792 Welding - Multilingual list of
terms for welding and related processes
BS EN 1792 Welding - Multilingual list of
terms for welding and related processes
BS EN ISO 9241-17 Ergonomic
requirements for office work with visual
display terminals (VDTs) - Part 17 : Formfilling dialogues
BS EN ISO 9241-17 Ergonomic
requirements for office work with visual
display terminals (VDTs) - Part 17 : Formfilling dialogues
BS EN ISO 9241-11 Ergonomic
requirements for office work with visual
display terminals (VDTs) - Part 11 :
Guidance on usability
BS EN ISO 9241-11 Ergonomic
requirements for office work with visual
display terminals (VDTs) - Part 11 :
Guidance on usability
BS EN ISO 9241-15 Ergonomic
requirements for office work with visual
display terminals (VDTs) - Part 15 :
Command dialogues
BS EN ISO 9241-15 Ergonomic
requirements for office work with visual
display terminals (VDTs) - Part 15 :
Command dialogues
Specification for sulfuric acid anodizing of
aluminium and wrought aluminium alloys
Aluminium alloy AL-P2024-T3511.
Extruded bars and sections 1,2 mm ó a or
D ó 150 mm
Aluminium alloy AL-P6082-T6. Extruded
bars and sections a or D ó 200 mm
Aluminium alloy AL-P7009-T7452. Hand
forgings 40 mm ó a ó 150 mm
BS ISO 11421
BS EN ISO 11369
BS EN 2693
BS EN 2374
BS EN 2375
BS EN 2377
BS ISO 6243
BS ISO 6243
BS 6912 : Part 1
BS 6913 : Part 4
BS 6914 : Part 1
BS 6914 : Part 1
BS 6068-1.2
BS 6068-1.2
BS ISO 11421 Optics and optical
instruments - Accuracy of optical transfer
function (OTF) measurement
BS EN ISO 11369 Water quality Determination of selected plant treatment
agents - Method using high performance
liquid chromatography with UV detection
after solid-liquid extraction
Aluminium alloy. AL-P5086-H111. Sheet
and strip 0,3 mm ó a ó 6 mm
Specification for glass fibre reinforcing
mouldings and sandwich composites.
Production of test panels
Resin preimpregnated materials.
Production batch sampling procedure
Specification for glass fibre reinforced
plastics. Test method. Determination of
apparent interlaminar shear strength
BS ISO 6243 Climatic data for building
design - Proposed system of symbols
BS ISO 6243 Climatic data for building
design - Proposed system of symbols
BS 6912 : Part 1 Safety of earth-moving
machinery - Part 1 : Specification for
hydraulic excavator and backhoe loader
boom lowering control device
BS 6913 : Part 4 Operation and
maintenance of earth-moving machinery Part 4 : Recommendations for service
instrumentation
BS 6914 : Part 1 Terminology (including
definitions of dimensions and symbols) for
earth-moving machinery - Part 1 : Basic
types
BS 6914 : Part 1 Terminology (including
definitions of dimensions and symbols) for
earth-moving machinery - Part 1 : Basic
types
BS 6068-1.2 Water quality - Part 1 :
Glossary - Section 1.2 : Additional terms
relating to types of water, and treatment
and storage of water and waste water, and
terms used in sampling and analysis of
water
BS 6068-1.2 Water quality - Part 1 :
Glossary - Section 1.2 : Additional terms
BS EN 2744
BS EN 2243-3
BS 6068-1.7
BS 6068-1.7
BS ISO/IEC 15053
BS ISO/IEC 15053
BS EN 2155-13
BS EN 2155-14
BS EN 2155-2
BS ISO IEC 15054
BS ISO IEC 15054
relating to types of water, and treatment
and storage of water and waste water, and
terms used in sampling and analysis of
water
Non-metallic materials. Preferred test
temperatures
Structural adhesives. Test methods -Peeling test metal-honeycomb core
BS 6068-1.7 Water quality - Part 1 :
Glossary - Section 1.7 : An additional 51
terms
BS 6068-1.7 Water quality - Part 1 :
Glossary - Section 1.7 : An additional 51
terms
BS ISO/IEC 15053 Information technology
- Telecommunications and information
exchange between systems - Private
Integrated Services Network Specification, functional model and
information flows - Call interception
additional network feature
BS ISO/IEC 15053 Information technology
- Telecommunications and information
exchange between systems - Private
Integrated Services Network Specification, functional model and
information flows - Call interception
additional network feature
Specification for test methods for
transparent materials for aircraft glazing -Determination of temperature at deflection
under load
Specification for test methods for
transparent materials for aircraft glazing -Determination of the 1/10 Vicat softening
temperature
Specification for test methods for
transparent materials for aircraft glazing -Determination of water absorption
BS ISO IEC 15054 Information technology
- Telecommunications and information
exchange between systems - Private
Integrated Services Network - Interexchange signalling protocol - Call
interception additional network feature
BS ISO IEC 15054 Information technology
BS ISO/IEC 15055
BS ISO/IEC 15055
BS ISO/IEC 14699
BS EN 2155-3
BS ISO/IEC 13242
BS ISO/IEC 13242
BS ISO/IEC 13241
- Telecommunications and information
exchange between systems - Private
Integrated Services Network - Interexchange signalling protocol - Call
interception additional network feature
BS ISO/IEC 15055 Information technology
- Telecommunications and information
exchange between systems - Private
Integrated Services Network Specification, functional model and
information flows - Transit counter
additional network feature
BS ISO/IEC 15055 Information technology
- Telecommunications and information
exchange between systems - Private
Integrated Services Network Specification, functional model and
information flows - Transit counter
additional network feature
BS ISO/IEC 14699 Information technology
- Open Systems Interconnection Transport Fast Byte Protocol
Specification for test methods for
transparent materials for aircraft glazing -Determination of refractive index
BS ISO/IEC 13242 Information technology
- Telecommunications and information
exchange between systems - Private
Integrated Services Network Specification, functional model and
information flows - Route Restriction Class
additional network feature
BS ISO/IEC 13242 Information technology
- Telecommunications and information
exchange between systems - Private
Integrated Services Network Specification, functional model and
information flows - Route Restriction Class
additional network feature
BS ISO/IEC 13241 Information technology
- Telecommunications and information
exchange between systems - Private
Integrated Services Network - Interexchange signalling protocol - Route
Restriction Class additional network
feature
BS ISO/IEC 13241
BS EN 2310
BS EN 3611
BS 4084
BS 6293 : Part 2
BS 6293 : Part 3
BS EN 2236
BS EN 2364
BS EN 2649
BS EN 2413
BS EN 2549
BS EN 2859
BS EN 2887
BS EN 2888
BS ISO/IEC 13241 Information technology
- Telecommunications and information
exchange between systems - Private
Integrated Services Network - Interexchange signalling protocol - Route
Restriction Class additional network
feature
Test methods for the flame resistance rating
of non-metallic materials
Spigots. Dimensions and fit selection.
Design standard
Specification for UNJ threads, with
controlled root radius, for aerospace : inch
series
Aerospace. MJ threads -- Limit dimensions
for bolts and nuts
Aerospace. MJ threads -- Limit dimensions
for fittings for fluid systems
Pins, headed, close tolerance shank, in
alloy steel. Technical specification
Specification for pins, shear headed, close
tolerance
Screws, pan head, slotted, threaded to head,
in alloy steel, cadmium plated.
Classification. 900 MPa (at ambient
temperature)/235øC
Bolts, shouldered, thin hexagonal head,
close tolerance shank, short thread, in alloy
steel, cadmium plated. Classification : 1100
MPa (at ambient temperature)/235øC
Bolts, normal hexagonal head, close
tolerance normal shank, short thread, in
titanium alloy, anodized, MoS2 lubricated.
Classification : 1100 MPa (at ambient
temperature)/315øC
Bolts, normal hexagonal head, close
tolerance normal shank, short thread, in
alloy steel, cadmium plated. Classification :
1100 MPa (at ambient temperature)/235øC
Bolts, normal hexagonal head, threaded to
head, in corrosion resisting steel,
passivated. Classification : 600 MPa (at
ambient temperature)/425øC
Bolts, normal hexagonal head, coarse
tolerance normal shank, short thread, in
corrosion resisting steel, passivated.
BS EN 2889
BS EN 2925
BS EN 2937
BS EN 2939
BS EN 2931
BS EN 3006
BS EN 3052
BS EN 3063
BS EN 3112
BS EN 3202
BS 466
Classification : 600 MPa (at ambient
temperature)/425øC
Bolts, normal hexagonal head, coarse
tolerance normal shank, short thread, in
alloy steel, cadmium plated. Classification.
900 MPa (at ambient temperature)/235øC
Bolts, double hexagon head, relieved
shank, long thread, in heat resisting steel
FE-PA92HT (A 286). Classification : 900
MPa (at ambient temperature)/650øC
Screws, hexagon head, threaded to head in
heat resisting steel FE-PA92HT (A286)
classification : 900 MPa (at ambient
temperature)/650øC
Screws, 100ø countersunk head, offset
cruciform recess, threaded to head in heat
resisting steel FE-PA92HT (A286).
Classification : 900 MPa (at ambient
temperature)/650øC
Bolts, T-head, relieved shank, long thread,
in heat resisting steel FE-PA92HT (A286).
Classification : 900 MPa (at ambient
temperature)/650øC
Bolts, hexagon head, relieved shank, long
thread, in heat resisting steel FE-PA92HT
(A286). Classification : 900 MPa (at
ambient temperature)/650øC
Bolts, normal hexagonal head, close
tolerance normal shank, short thread, in
heat and corrosion resisting steel,
passivated. Classification : 1100 MPa (at
ambient temperature)/425øC
Bolts, double hexagon head, close
tolerance shank, medium length thread, in
heat resisting nickel base alloy NI-P101HT
(Waspaloy). Classification : 1210 MPa (at
ambient temperature)/730øC
Bolts, normal hexagonal head, threaded to
head, in alloy steel, cadmium plated.
Classification : 900 MPa (at ambient
temperature)/235øC
Holes and traps for T-head bolts. Design
standard
Specification for power driven overhead
traveling cranes, semi-goliath and goliath
cranes for general use
BS 1757
BS 2452
BS 2573 : Part 1
BS 2573 : Part 2
BS 2799
BS ISO/IEC 14700
BS 3037 : Part 1
BS 3037 : Part 2
BS 3810 : Part 4
BS 5744
BS 7121: Part 2
BS 7262
BS 7333
BS EN 2647
BS EN 2752
CP 3010
Specification for power-driven mobile
cranes
Specification for electrically driven jib
cranes mounted on a high pedestal or portal
carriage (high pedestal or portal jib cranes)
Rules for the design of cranes -Specification for classification, stress
calculations and design criteria for
structures
Rules for the design of cranes -Specification for classification, stress
calculations and design of mechanisms
Specification for power-driven tower
cranes for building and engineering
construction
BS ISO/IEC 14700 Information technology
- Open Systems Interconnection - Network
Fast Byte Protocol
Specification for tyres for crane rail wheels
-- Double-ranged parallel-tread tyres
Specification for tyres for crane rail wheels
-- Forged or rolled steel double ranged rail
wheels and tyres (metric units)
Glossary of terms used in materials
handling -- Terms used in connection with
cranes
Code of practice for safe use of cranes
(overhead/underhung travelling and goliath
cranes, high pedestal and portal jib
dockside cranes, manually-operated and
light cranes, container handling cranes and
rail-mounted low carriage cranes
Code of practice for safe use of cranes -Inspection, testing and examination
Specification for automatic safe load
indicators
Specification for slewing jib cranes
Nuts, hexagonal, self-locking, ball seat, in
alloy steel, cadmium plated, MoS2
lubricated. Classification : 900 MPa (at
ambient temperature)/235øC
Specification for nuts, anchor, self locking
fixed, two lug, reduced series, with
counterbore. Classification : 1100
MPa/235øC
Code of practice for safe use of cranes
BS EN 2906
BS EN 2907
BS EN 2909
BS EN 2910
BS 302 : Part 4
BS 463 : Part 2
BS EN 3012
BS 1290
BS EN 3150
BS 1663
BS 1692
BS 2902
BS EN 3013
BS ISO IEC 15056
(mobile cranes, tower cranes and derrick
cranes)
Nuts, bihexagonal, self-locking, in heat
resisting steel FE-PA92HT (A286).
Classification : 1100 MPa (at ambient
temperature)/650øC
Nuts, bihexagonal, self-locking, in heat
resisting steel FE-PA92HT (A286), silver
plated. Classification : 1100 MPa (at
ambient temperature)/650øC
Nuts, bihexagonal, self-locking, deep
counterbored, in heat resisting steel FEPA92HT (A 286), silver plated.
Classification : 1100 MPa (at ambient
temperature)/650øC
Shank nuts, self-locking, in heat resisting
steel FE-PA92HT (A286). Classification :
1100 MPa (at ambient temperature)/650øC
Stranded steel wire ropes -- Specification
for ropes for lifts
Specification for sockets for wire ropes -Metric units
Nuts, bihexagonal, self-locking, in heat
resisting nickel base alloy NI-P101HT
(Waspaloy). Classification : 1 210 MPa (at
ambient temperature)/730øC
Specification for wire rope slings and sling
legs for general lifting purposes
Pins, shoulder, headless, in heat resisting
nickel base alloy NI-P100HT (Inconel 718)
Specification for higher tensile steel chain
Grade 40 (short link and pitched or
calibrated) for lifting purposes
Specification for gin blocks
Specification. Higher tensile steel chain
slings and rings, links alternative to rings,
egg links and intermediate links
Nuts, bihexagonal, self-locking, in heat
resisting nickel base alloy NI-P101HT
(Waspaloy), silver plated. Classification : 1
210 MPa (at ambient temperature)/730øC
BS ISO IEC 15056 Information technology
- Telecommunications and information
exchange between systems - Private Integrated Services Network - Interexchange signalling protocol - Transit
BS EN 3196
BS EN 3239
BS 2903
BS 3017
BS EN 3720
BS 3113
BS 3114
BS EN 3721
BS EN 3722
BS 3481 : Part 2
BS EN 2138
BS EN 2139
BS 3481 : Part 3
BS EN 2143
BS EN 2144
BS EN 2145
counter additional network feature
Nuts, hexagonal, self-locking, in heat
resisting steel FE-PA92HT (A286), silver
plated. Classification : 1100 MPa (at
ambient temperature)/425øC
Nuts, bihexagonal, self-locking, in heat
resisting nickel base alloy NI-P101HT
(Waspaloy), silver plated thread.
Classification : 1 210 MPa (at ambient
temperature)/730øC
Specification for higher tensile steel hooks
for chains, slings, blocks and general
engineering purposes
Specification for mild steel forged
ramshorn hooks
Nuts, bihexagonal, self-locking, in heat
resisting steel FE-PA92HT (A286), MoS2
coated. Classification : 1100 MPa (at
ambient temperature)/425øC
Specification for alloy steel chain, Grade
60. Short link, for lifting purposes
Specification for alloy steel chain, Grade
80. Polished short link calibrated load
chain for pulley blocks
Nuts, bihexagonal, self-locking, deep
counterbored, in heat resisting steel, FEPA92HT (A 286), MoS2 coated.
Classification : 1100 MPa (at ambient
temperature)/425øC
Shank nuts, self-locking, in heat resisting
steel FE-PA92HT (A 286), MoS2 coated.
Classification : 1100 MPa (at ambient
temperature)/425øC
Flat lifting slings Specification for flat
woven webbing slings made of man-made
fibre for general service
Washers, flat, in steel, cadmium plated
Specification for washers, flat heat resisting
steel
Flat lifting slings Disposable flat lifting
slings
Rivets, solid, universal head, in aluminium
1050A, inch based series
Rivets, solid, universal head, in aluminium
alloy 2117, inch based series
Rivets, solid, universal head, in aluminium
BS EN 2146
BS EN 2148
BS 3810 : Part 5
BS 3810 : Part 6
BS 4018
BS EN 2285
BS 4278
BS EN 2286
BS EN 2287
BS 4344
BS 4429
BS EN 2288
BS 4536
BS EN 2309
BS 4654
BS EN 2311
BS 4878
BS EN 2327
BS EN 2353
alloy 2117, anodized or chromated, inch
based series
Rivets, solid, universal head, in aluminium
alloy 2017A, inch based series
Rivets, solid, universal head, in aluminium
alloy 5056A, inch based series
Glossary of terms used in materials
handling -- Terms used in connection with
lifting tackle
Glossary of terms used in materials
handling -- Terms used in connection with
pulley blocks
Specification for pulley blocks for use with
wire rope for a maximum lift of 25 tonf in
combination
Specification for bushes plain, aluminium
alloy with self-lubricating liner.
Dimensions and loads
Specification for eyebolts for lifting
purposes
Specification for bushes flanged,
aluminium alloy with self-lubricating liner.
Dimensions and loads
Specification for bushes plain, corrosion
resisting steel with self-lubricating liner.
Dimensions and loads
Pulley blocks for use with natural and
synthetic fibre ropes
Specification for rigging screws and
turnbuckles for general engineering, lifting
purposes and pipe hanger applications
Specification for bushes flanged, corrosion
resisting steel with self-lubricating liner.
Dimensions and loads
Specification for heavy duty pulley blocks
for use with wire rope
Specification for hole sizes for solid rivets
Specification for hooks for lifting freight
containers of up to 30 tonnes
Specification for bushes with selflubricating liner. Technical specification
Specification for large (vee-throated)
haulage rope pulleys for mines and quarries
Specification for washers, lock with radial
serrations in alloy steel. Dimensions
Specification for turnbarrels, control cable
BS EN 2354
BS EN 2356
BS EN 2363
BS EN 2365
BS 4942:Part 2
BS EN 2367
BS ISO IEC 15056
BS 4942:Part 3
BS 4942:Part 4
BS 4942:Part 5
BS EN 2544
BS EN 2546
BS EN 2550
BS EN 2551
BS EN 2552
BS 5237
in corrosion resisting steel. Dimensions and
loads
Specification for eye-ends, threaded,
control cable in corrosion resisting steel.
Dimensions and loads
Specification for fork-ends threaded,
control cable for rolling bearings in
corrosion resisting steel. Dimensions and
loads
Specification for locking clips for
turnbuckles of control cables. Dimensions
Specification for collars, aluminium alloy
Short link chain for lifting purposes -Specification for grade M (4) noncalibrated
chain
Specification for split pins in steel EN 2573
BS ISO IEC 15056 Information technology
- Telecommunications and information
exchange between systems - Private Integrated Services Network - Interexchange signalling protocol - Transit
counter additional network feature
Short link chain for lifting purposes -Specification for grade M (4) calibrated
chain
Short link chain for lifting purposes -Specification for grade S (6) non-calibrated
chain
Short link chain for lifting purposes -Specification for grade T (8) non-calibrated
chain
Specification for representation of rivets on
drawings for aerospace equipment
Specification for washers, lock with radial
serrations in corrosion resisting steel.
Dimensions
Rivets, solid 100ø normal countersunk
head, in aluminium 1050A, inch based
series
Rivets, solid, 100ø normal countersunk
head with dome, in aluminium alloy 2117,
inch based series
Rivets, solid, 100ø normal countersunk
head with dome, in aluminium alloy 2117,
anodized or chromated, inch based series
Specification for lifting twistlocks
BS EN 2553
BS EN 2555
BS EN 2556
BS EN 2569
BS ISO/IEC 13814
BS EN 2596
BS EN 2609
BS EN 2648
BS 6166 : Part 1
BS 6166 : Part 2
BS 6166 : Part 3
BS 6210
BS 6304
BS 6521
BS 6668 : Part 1
BS 6668 : Part 2
BS EN 3151
BS 6994
BS 7035
Rivets, solid, 100ø normal countersunk
head with dome, in aluminium alloy
2017A, inch based series
Rivets, solid, 100ø normal countersunk
head with dome, in aluminium alloy
5056A, inch based series
Rivets, solid, 100ø normal countersunk
head with dome, in aluminium alloy
5056A, anodized or chromated, inch based
series
Control cable fittings and turnbarrels.
Technical specification
BS ISO/IEC 13814 Information technology
- Programming languages - Generic
package of complex elementary functions
for Ada
Specification for washers, lock, with radial
serrations, in corrosion resisting steel,
cadmium plated. Dimensions
Specification for turnbarrels, control cable
in copper-zinc alloys. Dimensions and
loads
Washers, concave, in alloy steel, cadmium
plated
Lifting slings -- Methods of rating
Lifting slings -- Specification for marking
Lifting slings -- Guide to the selection and
safe use of lifting slings for multi-purposes
Code of practice for the safe use of wire
rope slings for general lifting purposes
Specification for chain slings of welded
construction : grades M(4), S(6) and T(8)
Guide for proper use and maintenance of
calibrated round steel link lifting chains
Textile lifting slings -- Specification for
lifting slings for general service made from
certain natural and man-made fibre ropes
Textile lifting slings -- Specification for
roundslings made of man-made fibre for
general service
Dowels, plain, in heat resisting nickel base
alloy NI-P100HT (Inconel 718)
Specification for steel shackles for lifting
and general engineering purposes : grade
M(4)
Code of practice for socketing of stranded
BS 7166
BS 7167
BS ISO 10792-1
BS ISO 10792-2
BS ISO 10792-3
BS 3125
BS ISO 12641
BS EN 2009
BS EN 61866
BS 3810 : Part 8
BS EN 2011
BS EN 2012
BS 4898
BS EN 2014
BS EN 2015
BS 5323
BS EN 2017
steel wire ropes
Specification for wedge and socket
anchorages for wire ropes
Specification for Bordeaux connections
Aerospace. Airframe spherical plain
bearings in corrosion-resisting steel with
self-lubricating liner -- Metric series
Aerospace. Airframe spherical plain
bearings in corrosion-resisting steel with
self-lubricating liner -- Inch series
Aerospace. Airframe spherical plain
bearings in corrosion-resisting steel with
self-lubricating liner -- Technical
specification
Specification for power-driven mast hoists
for materials
BS ISO 12641 Graphic technology Prepress digital data exchange - Colour
targets for input scanner calibration
Bearings. Airframe rolling rigid, single row
ball bearings in steel diameter series 8 and
9. Dimensions and loads
BS EN 61866 Audiovisual systems Interactive text transmission system (ITTS)
Glossary of terms used in materials
handling -- Terms used in connection with
lifts, lifting platforms and inclined haulages
Specification for bearings - airframe rolling
rigid single row ball bearings in corrosion
resisting steel diameter series 8 and 9.
Dimensions and loads
Specification for bearings - airframe rolling
rigid, single row ball bearings in steel
diameter series 0 and 2. Dimensions and
loads
Specification for chain lever hoists
Specification for bearings-airframe rolling
rigid single row ball bearings in corrosion
resisting steel diameter series 0 and 2.
Dimensions and loads
Specification for bearings - airframe rolling
double row, self aligning ball bearings in
steel diameter series 2. Dimensions and
loads
Code of practice for scissor lifts
Specification for bearings-airframe rolling
BS EN 2018
BS EN 2020
BS EN 2022
BS 5827
BS EN 2023
BS EN 2063
BS 6037
BS EN 2064
BS 6440
BS EN 2079
BS 7212
BS EN 2089
BS EN 61580-3
BS EN 61146-3
BS EN 2335
double row self aligning ball bearings in
corrosion resisting steel diameter series 2.
Dimensions and loads
Specification for bearings - airframe rolling
single row, self aligning roller bearings in
steel diameter series 3 and 4. Dimensions
and loads
Specification for bearings - airframe rolling
single row self aligning roller bearings in
corrosion resisting steel diameter series 3
and 4. Dimensions and loads
Specification for bearings, spherical plain
in corrosion resisting steel with selflubricating liner, Light series. Dimensions
and loads
Specification for mobile, manually
operated patient-lifting devices
Specification for bearings - spherical plain
in corrosion resisting steel with selflubricating liner. Normal series.
Dimensions and loads
Airframe rolling bearings. Technical
specification
Code of practice for permanently installed
suspended access equipment
Bearings, spherical plain in corrosion
resisting steel with self lubricating liner.
Technical specification
Code of practice for powered lifting
platforms for use by disabled persons
Bearings, precision ball with flange in
corrosion resisting steel, for instruments
and equipment. Dimensions and loads
Code of practice for safe use of
construction hoists
Aluminium alloy AL-P2014A-T6 or T62.
Sheet and strip 0,4 mm ó a ó 6 mm
BS EN 61580-3 Methods of measurement
for waveguides - Part 3 : Variation of
group delay
BS EN 61146-3 Video cameras
(PAL/SECAM/NTSC) - Methods of
measurement - Part 3 : Non-broadcast
camera-recorders
Specification for bearings-spherical plain in
corrosion resisting steel without assembly
BS EN 2336
BS EN 2498
BS EN 2501
BS EN 2515
BS EN 2584
BS EN 2585
BS EN 2587
BS EN 2588
BS EN 2790
BS EN 2791
BS EN 2792
BS EN 3045
BS EN 3046
slot. Dimensions and loads
Specification for bearings-spherical plain in
steel with assembly slots. Dimensions and
loads
Specification for rod ends, adjustable selfaligning plain bearing, with self-lubricating
liner and threaded shank. Dimensions and
loads
Bearings, spherical plain in corrosion
resisting steel with self-lubricating liner
and wide inner ring. Dimensions and loads
Specification for rod ends, adjustable
single fork and threaded shank.
Dimensions and loads
Bearings, spherical plain in corrosion
resisting steel with self-lubricating liner.
Narrow series. Elevated loads at ambient
temperature. Dimensions and loads
Bearings, spherical plain in corrosion
resisting steel with self-lubricating liner.
Wide series. Elevated loads at ambient
temperature. Dimensions and loads
Specification for rod ends, adjustable
double fork and threaded shank.
Dimensions and loads
Bearings. Spherical plain in corrosion
resisting steel with assembly slots.
Dimensions and loads
Rod ends, adjustable, self-aligning plain
bearing with self-lubricating liner and
threaded shank with engagement : 1.5
thread. Dimensions and loads
Rod ends, adjustable, single fork and
threaded shank with engagement : 1.5
thread diameter. Dimensions and loads
Rod ends, adjustable, double fork and
threaded shank with engagement : 1.5
thread diameter. Dimensions and loads
Bearings, airframe rolling. Rigid single row
ball bearings in steel. Diameter series 0 and
2. Reduced clearance category. Dimensions
and loads
Bearings, airframe rolling. Rigid single row
ball bearings in steel, cadmium plated.
Diameter series 0 and 2. Reduced clearance
category. Dimensions and loads
BS EN 3047
BS EN 3053
BS EN 3054
BS EN 3055
BS EN 3056
BS EN 3048
BS EN 3057
BS EN 3058
BS EN 3281
BS EN 3282
BS EN 3283
BS EN 3284
BS EN 3285
BS EN 3286
Bearings, airframe rolling. Rigid single row
ball bearings in corrosion resisting steel.
Diameter series 0 and 2. Reduced clearance
category. Dimensions and loads
Bearings, airframe rolling. Single row selfaligning roller bearings in steel.
Dimensions and loads
Bearings, airframe rolling. Single row selfaligning roller bearings in steel, cadmium
plated. Dimensions and loads
Bearings, airframe rolling. Single row selfaligning roller bearings in corrosion
resisting steel. Dimensions and loads
Bearings, airframe rolling. Rigid double
row ball bearings in steel. Dimensions and
loads
Bearings, spherical plain in corrosion
resisting steel with self-lubricating liner.
Light series. Elevated loads at ambient
temperature. Dimensions and loads
Bearings, airframe rolling. Rigid double
row ball bearings in steel, cadmium plated.
Dimensions and loads
Bearings, airframe rolling. Rigid double
row ball bearings in corrosion resisting
steel. Dimensions and loads
Bearings, airframe rolling. Rigid single row
ball bearings in steel. Diameter series 8 and
9. Dimensions and loads
Bearings, airframe rolling. Rigid single row
ball bearings in steel, cadmium plated.
Diameter series 8 and 9. Dimensions and
loads
Bearings, airframe rolling. Rigid single row
ball beatings in corrosion resisting steel.
Diameter series 8 and 9. Dimensions and
loads
Bearings, airframe rolling. Rigid single row
ball bearings in steel. Diameter series 0 and
2. Normal clearance category. Dimensions
and loads
Bearings; airframe rolling. Rigid single
row ball bearings in steel, cadmium plated.
Diameter series 0 and 2. Normal clearance
category. Dimensions and loads
Bearings, airframe rolling. Rigid single row
BS EN 3287
BS EN 3288
BS EN 3289
BS EN 3290
BS EN 3291
BS EN 3292
BS EN 3446
BS EN 3541
BS EN 61057
BS AU 145a
BS AU 145c
BS AU 148 : Part 10
BS AU 148 : Part 12
BS 3156 : Part 11 : Subsection 11.0.1
ball bearings in corrosion resisting steel.
Diameter series 0 and 2. Normal clearance
category. Dimensions and loads
Bearings, airframe rolling. Double row
self-aligning ball bearings in steel.
Diameter series 2. Dimensions and loads
Bearings, airframe rolling. Double row
self-aligning ball bearings in steel,
cadmium plated. Diameter series 2.
Dimensions and loads
Bearings, airframe rolling. Double row
self-aligning ball bearings in corrosion
resisting steel. Diameter series 2.
Dimensions and loads
Bearings, airframe rolling. Single row selfaligning roller bearings in steel. Diameter
series 3 and 4. Dimensions and loads
Bearings, airframe rolling. Single row selfaligning roller bearings in steel, cadmium
plated. Diameter series 3 and 4.
Dimensions and loads
Bearings, airframe rolling. Single row selfaligning roller bearings in corrosion
resisting steel. Diameter series 3 and 4.
Dimensions and loads
Bearings, precision ball without flange in
corrosion resisting steel, for instruments
and equipment. Dimensions and loads
Rod ends, adjustable, self-aligning ball
bearing with threaded shank. Dimensions,
torques, clearances and loads
Aerial devices with insulating boom used
for live working exceeding 1 kV a.c.
Specification for reflex-reflecting number
plates
Specification for retroreflecting number
plates
Methods of test for motor vehicle paints -Resistance to heat and corrosion
Methods of test for motor vehicle paints -Resistance to accelerated weathering
BS 3156 : Part 11 : Subsection 11.0.1
Analysis of fuel gases - Part 11 : Methods
for non-manufactured gases - Section 11.0 :
General - Subsection 11.0.1 : Guidelines
for sampling natural gas
BS AU 50 : Part 1 : Section 3 : Subsection
3.1a
BS AU 148 : Part 13
BS AU 148 : Part 15
BS AU 148 : Part 2
BS AU 148 : Part 3
BS AU 148 : Part 4
BS AU 148 : Part 6
BS AU 148 : Part 9
BS AU 159d
BS AU 169a
BS 3810 : Part 2
BS EN ISO 308
BS EN 60335-2-60
BS EN 60704-2-7
BS AU 176
BS AU 184
BS AU 189
BS AU 191
Tyres and wheels -- Tyres -- Off-the-road
tyres -- Specification for narrow and wide
base tyre designations and inflations
Methods of test for motor vehicle paints -Resistance to deterioration by contact with
other materials
Methods of test for motor vehicle paints -Resistance to chipping
Methods of test for motor vehicle paints -Resistance to continuous salt spray
Methods of test for motor vehicle paints -Flexibility and adhesion
Methods of test for motor vehicle paints -Resistance to abrasion
Methods of test for motor vehicle paints -Hardness
Methods of test for motor vehicle paints
Specification for repairs to tyres for motor
vehicles used on the public highway
Method for determination of burning
behaviour of interior materials for road
vehicles, and tractors and machinery for
agriculture and forestry
Glossary of terms used in materials
handling -- Terms used in connection with
conveyors and elevators (excluding
pneumatic and hydraulic handling)
BS EN ISO 308 Plastics - Phenolic
moulding materials - Determination of
acetone-soluble matter (apparent resin
content of material in the unmoulded state)
BS EN 60335-2-60 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.60 :
Whirlpool baths
BS EN 60704-2-7 Household and similar
electrical appliances - Test code for the
determination of airborne acoustical noise Part 2 : Particular requirements for fans
Method for establishment of eyellipses for
driver's eye location
Specification for world parts manufacturer
identifier code (WPMI) for road vehicles
Method of test for steady state cornering
behaviour for road vehicles
Glossary of terms for road vehicle
BS AU 205
BS 5667 : Part 1
BS 5667 : Part 10
BS 5667 : Part 11
BS 5667 : Part 12
BS 5667 : Part 13
BS 5667 : Part 15
BS 5667 : Part 16
BS EN 60704-2-7
BS 5667 : Part 17
BS 5667 : Part 18
BS 5667 : Part 19
collisions
Method of test for effect of braking on
steady state cornering behaviour of road
vehicles
Specification for continuous mechanical
handling equipment - safety requirements - General
Specification for continuous mechanical
handling equipment -- safety requirements
-- Loose bulk materials : vertical screw
conveyors
Specification for continuous mechanical
handling equipment -- Unit loads : fixed
slat conveyors (metal or wood) with
horizontal shafts
Specification for continuous mechanical
handling equipment -- safety requirements
-- Unit loads : mobile slat conveyors (metal
or wood) with horizontal shafts
Specification for continuous mechanical
handling equipment -- safety requirements
-- Unit loads : arm elevators and push bar
conveyors
Specification for continuous mechanical
handling equipment -- safety requirements
-- Unit loads : crate-carrying chain
conveyors having biplanar chains for fiatbottomed unit loads
Specification for continuous mechanical
handling equipment -- safety requirements
-- Unit loads : slat band chain conveyors
BS EN 60704-2-7 Household and similar
electrical appliances - Test code for the
determination of airborne acoustical noise Part 2 : Particular requirements for fans
Specification for continuous mechanical
handling equipment -- safety requirements
-- Unit loads : continuous plate conveyors
(horizontal)
Specification for continuous mechanical
handling equipment -- safety requirements
-- Conveyors and elevators with chainelements - examples for guarding of nip
points
Belt conveyors -- examples for guarding of
nip points
BS ISO/IEC 11588-3
BS 6141
BS EN 60825-4
BS AU 228 : Part 1
BS 5667 : Part 5
BS AU 228 : Part 2
BS 5667 : Part 6
BS AU 230
BS 5667 : Part 8
BS 5667 : Part 9
BS AU 244
BS AU 246
BS EN 125000
BS 5667 : Part 7
BS AU 256
BS ISO/IEC 11588-3 Information
technology - Message Handling Systems
(MHS) management - Part 3 : Logging
information
BS 6141 Insulated cables and flexible
cords for use in high temperature zones
BS EN 60825-4 Safety of laser products Part 4 : Laser guards
Impact tests on road vehicles -Specification for measurement techniques
and general instrumentation
Specification for continuous mechanical
handling equipment -- safety requirements
-- Loose bulk materials : couplings and
hose components used in pneumatic
handling
Impact tests on road vehicles -Specification for measurement techniques
using optical instrumentation
Specification for continuous mechanical
handling equipment -- safety requirements
-- Loose bulk materials : rotary feeders
used in pneumatic handling
Methods of test for lateral transient
response behaviour of passenger cars
Specification for continuous mechanical
handling equipment -- safety requirements
-- Loose bulk materials : hand-operated
power shovels
Specification for continuous mechanical
handling equipment -- safety requirements
-- Loose bulk materials : bulk throwing
machines
Glossary of terms for road vehicle
dynamics and road holding ability
Method for determination of the centre of
gravity of road vehicles with two axles
BS EN 125000 Harmonized system of
quality assessment for electronic
components - Generic specification: Cores
made of ferrite materials
Specification for continuous mechanical
handling equipment -- safety requirements
-- Loose bulk materials : rotary drum and
rotary vane feeders
Passenger cars. Power-off reactions of a
BS AU 258
BS AU 7a
BS AU 88a
BS AU 194
BS AU 195a
BS EN 60424-2
BS EN 60424-2
BS EN 165000-5
BS AU 196
BS AU 197
BS AU 198
BS AU 201 : Part 1
BS AU 227
BS EN 61237-4
BS AU 231
vehicle in a turn. Open-loop test method
Specification for elasticated straps
Specification for colour code for road
vehicle electrical cables
Recommendations for ratings for light duty
cables for automobile use
Specification for performance of electrical
connections between towing vehicles and
trailers
Specification for mounting electrical
connections on rear cross members of
towing vehicles
BS EN 60424-2 Guidance of the limits of
surface irregularities of ferrite cores - Part
2 : RM-cores
BS EN 60424-2 Guidance of the limits of
surface irregularities of ferrite cores - Part
2 : RM-cores
BS EN 165000-5 Harmonized system of
quality assessment for electronic
components - Film and hybrid integrated
circuits - Part 5 : Procedure for
qualification approval
Specification for electrical connections
between 24 V trailer antilock braking
systems and towing vehicles
Specification for electrical connections
between towing vehicles and trailers with
24 V electrical equipment : type 24 N
(normal)
Specification for electrical connections
between towing vehicles and trailers with
24 V electrical equipment : type 24 S
(supplementary)
Relays and flashers -- Specification for
mounting and positioning dimensions of
male tabs and socket apertures for relays
and flashers for road vehicles
Specification for dimensions of cylindrical
shaft ends and hubs for alternators for
commercial vehicles and buses
BS EN 61237-4 Broadcast video tape
recorders - Methods of measurement - Part
4 : Analogue audio performance
measurements
Specification of seven-core connecting
BS AU 232
BS AU 233
BS AU 237a
BS 2567
BS EN ISO 584
BS AU 243 : Part 2
BS 2890
BS AU 250
BS AU 255 : Part 1
BS AU 255 : Part 2
BS 4409 : Part 1
BS 4409 : Part 2
BS 4409 : Part 3
BS EN ISO 4597-1
BS AU 47
BS AU 238
BS ISO 6055
DD ENV 12923-1
BS 6840-4
cable for road vehicles
Methods of test and general requirements
for road vehicle alternators with regulators
Specification for starter motor electrical
connections for passenger cars
Specification for light domestic duty
jumper lead sets for automotive starting
Specification for steel non-powered roller
conveyors
BS EN ISO 584 Plastics - Unsaturated
polyester resins - Determination of
reactivity at 80 °C (conventional method)
Methods of test for electrical disturbance
by conduction and coupling -- Electrical
transient conduction along supply lines
only on passenger cars and light
commercial vehicles with 12 V supply
Specification for troughed belt conveyors
Specification for mounting dimensions of
alternators, types 1, 2 and 3 for commercial
vehicles and buses
Road vehicle unscreened low tension
cables -- Specification for conductor sizes
and dimensions for thick walled insulated
cables
Specification for conductor sizes and
dimensions for thin walled insulated cables
Screw conveyors -- Specification for fixed
trough type
Screw conveyors -- Specification for
portable and mobile type (augers)
Screw conveyors -- Method for calculating
drive power
BS EN ISO 4597-1 Plastics - Hardeners
and accelerators for epoxide resins - Part 1
: Designation
Specification for advance warning triangle
to indicate temporary obstructions
Glossary of terms for road vehicle lighting
and light signalling devices
BS ISO 6055 High-lift rider trucks Overhead guards - Specification and testing
DD ENV 12923-1 Advanced technical
ceramics - Monolithic ceramics - General
practice for undertaking corrosion tests
BS 6840-4 Sound system equipment - Part
DD ENV 12834
BS 5934
BS AU 152
BS AU 217 : Part 2
BS AU 236
BS 7300
BS AU 110a
BS AU 142
BS AU 163a
BS AU 174 : Part 1
BS AU 174 : Part 2
BS AU 180 : Part 1
BS AU 180 : Part 2
BS AU 180 : Part 3
BS AU 180 : Part 4
BS 490 : Part 1
4 : Microphones
DD ENV 12834 Road Transport and
Traffic Telematics (RTTT) - Dedicated
Short-Range Communications (DSRC) Application Layer
Method for calculation of operating power
and tensile forces in belt conveyors with
carrying idlers on continuous mechanical
handling equipment
Specification for rear marking plates for
vehicles
Maximum road speed limiters for motor
vehicles -- Specification for system and
component requirement
Specification for circular electronic
tachographs for road vehicles
Code of practice for safeguarding of the
hazard points on troughed belt conveyors
Specification for rubber hoses and hose
assemblies for automotive air pressure
braking systems
Methods of test for brake linings materials
Specification for pressure test connection
for compressed-air pneumatic braking
equipment for road vehicles
Hydraulic brake systems, using nonpetroleum base brake fluids for load
vehicles -- Specification for non-petroleum
base reference fluids
Hydraulic brake systems, using nonpetroleum base brake fluids for load
vehicles -- Specification for non-petroleum
base break fluid
Brake linings -- Methods for measurement
of? compressibility of brake lining material
Brake linings -- Methods for measurement
of internal shear strength of lining material
Brake linings -- Methods for measurement
of shear strength of disc brake pad and
drum brake shoe assemblies
Brake linings -- Methods for determining
effects of heat on dimensions and from of
disc brake pads
Conveyor and elevator belting -Specification for rubber and plastics
conveyor belting of textile construction for
BS AU 180 : Part 5
BS 490 : Part 10 : Section 10.1
BS AU 180 : Part 6
BS 490 : Part 10 : Section 10.2
BS 490 : Part 10 : Section 10.3
BS 490 : Part 10 : Section 10.4
BS AU 213
BS 490 : Part 10 : Section 10.5
BS 490 : Part 10 : Section 10.6
BS AU 216 : Part 1
BS 490 : Part 10 : Section 10.7
BS 490 : Part 11 : Section 11.2
BS AU 222
general use
Brake linings -- Methods for determining
resistance to water, saline solution, oil and
brake fluid of brake lining material
Conveyor and elevator belting -- Testing
for physical properties -- Introduction
Brake linings -- Methods for assessment of
seizure to ferrous mating surface due to
corrosion
Conveyor and elevator belting -- Testing
for physical properties -- Method for
determination of full thickness tensile
strength and elongation of rubber and
plastics conveyor belting of textile
constriction
Conveyor and elevator belting -- Testing
for physical properties -- Methods for
measurement of overall thickness and
cover thickness
Conveyor and elevator belting -- Testing
for physical properties -- Method for
determination of adhesion strength of
rubber and plastics belting of textile
construction
Specification for calculation of forces on
control devices for inertia braking of
caravans and light trailers
Conveyor and elevator belting -- Testing
for physical properties -- Method for
determination of tensile strength and
elongation at break of rubber covers
Conveyor and elevator belting -- Testing
for physical properties -- Method for
determination of troughability of conveyor
belts
Hydraulic brake systems using petroleum
base brake fluids for road vehicles -Specification for petroleum base reference
fluid
Conveyor and elevator belting -- Testing
for physical properties -- Method for
determination of length of an endless belt
Methods of test for safety -- Low energy
and high energy propane gallery tests
Method of evaluating surface and material
flaws of disc brake pads after testing
BS 490 : Part 11 : Section 11.3
BS 490 : Part 2
BS 7253 : Part 6
BS 490 : Part 3
BS EN ISO 14602
BS 2075
BS AU 50 : Part 1 : Section 1 : Subsection
1.3
BS AU 50 : Part 1 : Section 2 : Subsection
2.2
BS 6057 : Section 1.1
BS 3900 : Part C5
BS EN ISO 1514
BS AU 50 : Part 1 : Section 2 : Subsection
2.3
BS AU 50 : Part 1 : Section 2 : Subsection
2.4
BS 2969
BS AU 50 : Part 1 : Section 3 : Subsection
3.1a
BS AU 50 : Part 1 : Section 4 : Subsection
4.1a
Methods of test for safety -- Drum friction
tests
Conveyor and elevator belting -- Rubber
and plastics belting of textile construction
for use on bucket elevators
BS 7253 : Part 6 Non-metallic materials for
surgical implants - Part 6 : Specification for
ceramic materials based on yttria-stabilized
tetragonal zirconia (Y-TZP)
Conveyor and elevator belting -Specification for flammability and antistatic properties of rubber and of plastics
conveyor belting of textile construction for
general use
BS EN ISO 14602 Non-active surgical
implants - Implants for osteosynthesis Particular requirements
Specification for chains and chain wheels
for slat conveyors
Tyres and wheels -- Tyres -- Car tyres -Method of measuring rolling resistance
Tyres and wheels -- Tyres -- Commercial
vehicle tyres -- Method of measuring tyre
rolling circumference. Loaded new tyres
BS 6057 : Section 1.1 Rubber latices - Part
1 : Specification and coding - Section 1.1 :
Specification for centrifuged or creamed,
ammonia-preserved natural rubber latices
BS 3900 : Part C5 Methods of test for Paints - Determination of film thickness
BS EN ISO 1514 Paints and varnishes Standard panels for testing
Tyres and wheels -- Tyres -- Commercial
vehicle tyres -- Method of measuring
rolling resistance
Tyres and wheels -- Tyres -- Commercial
vehicle tyres -- Method of test for verifying
tyre capabilities
Specification for high-tensile steel chains
(round link) for chain conveyors and coal
ploughs
Tyres and wheels -- Tyres -- Off-the-road
tyres -- Specification for narrow and wide
base tyre designations and inflations
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
BS AU 50 : Part 1 : Section 4 : Subsection
4.2a
BS 3289
BS AU 50 : Part 1 : Section 5 : Subsection
5.1
BS 4116 : Part 1
BS 4116 : Part 2
BS AU 50 : Part 1 : Section 4 : Subsection
4.3a
BS AU 50 : Part 1 : Section 4 : Subsection
4.4a
BS AU 50 : Part 1 : Section 4 : Subsection
4.7
BS AU 50 : Part 1 : Section 5 : Subsection
5.2
BS EN 1176-7
BS AU 50 : Part 1 : Section 5 : Subsection
5.3
BS AU 50 : Part 1 : Section 5 : Subsection
5.4
for designations and dimensions for ply
rating marked series tyres
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
for load ratings for ply rating marked series
tyres
Specification for textile carcase conveyor
belting for use in underground mines
(including fire performance)
Tyres and wheels -- Tyres -- Industrial
vehicle tyres -- Specification for codedesignated series tyres
Conveyer chains, their attachments and
associated chain wheels -- Specification for
chains (metric series)
Conveyer chains, their attachments and
associated chain wheels -- Specification for
chain wheels
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
for classification codes and nomenclature
for ply rating marked series tyres
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
for ply rating marked series tyres for log
skidders
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
for marking, dimensions, load ratings and
reference speeds for service description
marked tyres for agricultural tractor drive
wheels
Tyres and wheels -- Tyres -- Industrial
vehicle tyres -- Specification for pneumatic
tyres (metric series) on 5ø tapered or flat
base rims : designation, dimensions and
marking
BS EN 1176-7 Playground equipment Part 7 : Guidance on installation,
inspection, maintenance and operation
Tyres and wheels -- Tyres -- Industrial
vehicle tyres -- Specification for pneumatic
tyres (metric series) on 5ø tapered or flat
base rims : load ratings
Tyres and wheels -- Tyres -- Industrial
vehicle tyres -- Specification for solid tyres
BS AU 50 : Part 1 : Section 5 : Subsection
5.6
BS 4116 : Part 3
BS 4831
BS AU 50 : Part 1 : Section 6 : Subsection
6.3a
BS EN 1176-7
BS EN 60335-2-44
BS EN 60335-2-81
BS AU 50 : Part 1 : Section 6 : Subsection
6.6
BS AU 50 : Part 1 : Section 7 : Subsection
7.1
BS AU 50 : Part 1 : Section 8
BS AU 50 : Part 2 : Section 3
BS AU 50 : Part 2 : Section 7a
BS ISO 8727
(metric series) for pneumatic tyre rims:
designation, dimensions and marking
Tyres and wheels -- Tyres -- Industrial
vehicle tyres -- Specification for cylindrical
and conical base rubber solid tyres (metric
series), designation, dimensions and
marking
Conveyer chains, their attachments and
associated chain wheels -- Specification of
attachments (metric series)
Specification for shackle type connector
units for chain conveyors for mining
Tyres and wheels -- Tyres -- Motorcycle
tyres -- Specifications for designations,
dimensions and load rating for code
designated series (diameter codes 4 to 12)
tyres
BS EN 1176-7 Playground equipment Part 7 : Guidance on installation,
inspection, maintenance and operation
BS EN 60335-2-44 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.44 :
Ironers
BS EN 60335-2-81 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.81 :
Foot warmers and heating mats
Tyres and wheels -- Tyres -- Motorcycle
tyres -- Method of test for verifying tyre
capabilities
Tyres and wheels -- Tyres -- Moped tyres -Specification for tyre designations,
dimensions and load ratings
Tyres and wheels -- Tyres -- Code of
practice for the storage of tyres, inner tubes
and flaps
Tyres and wheels -- Wheels and rims -Specification for road-wheel nuts, studs
and bolts for commercial vehicles
Tyres and wheels -- Wheels and rims -Code of practice for the selection and care
of tyres and wheels for commercial
vehicles
BS ISO 8727 Mechanical vibration and
shock - Human exposure - Biodynamic
BS ISO 5805
BS ISO 5805
DD ENV 1257-2
BS AU 50 : Part 3 : Section 1a
BS AU 50 : Part 3 : Section 2
BS AU 50 : Part 3 : Section 3
BS AU 50 : Part 3 : Section 4a
BS AU 50 : Part 3 : Section 5
BS AU 50 : Part 3 : Section 6
BS AU 50 : Part 3 : Section 7
BS AU 50 : Part 4 : Section 1 : Subsection
1.1
BS AU 50 : Part 4 : Section 2 : Subsection
2.1
BS AU 50 : Part 4 : Section 3 : Subsection
3.1
BS EN 61621
BS AU 50 : Part 4 : Section 7 : Subsection
7.1
BS AU 214 : Part 2
coordinate systems
BS ISO 5805 Mechanical vibration and
shock - Human exposure - Vocabulary
BS ISO 5805 Mechanical vibration and
shock - Human exposure - Vocabulary
DD ENV 1257-2 Identification card
systems - Rules for Personal Identification
Number handling in intersector
environments - Part 2 : PIN protection
Tyres and wheels -- Valves -- Specification
for valve dimensions
Tyres and wheels -- Valves -- Tyre valve
threads 5V1, 5V2, 6V1 and 8V1
Tyres and wheels -- Valves -- Tyre valve
threads 9V1, 10V2, 12V1 and 13V1
Tyres and wheels -- Valves -- Type valve
threads 8V2, 10V1, 11V1, 13V2, 15V1,
16V1, 17V1, 17V2, 17V3, 19V1 and 20V1
Tyres and wheels -- Valves -- Dimensions
for ISO core chamber No. 1 for tyre
inflation valves
Tyres and wheels -- Valves -- Dimensions
for ISO core chamber No.2 for tyre
inflation valves
Tyres and wheels -- Valves -- Code of
practice for the selection and care of tyre
inflation valves for passenger cars
(including caravans and light trailers)
Tyres and wheels -- Rim profiles and
dimensions -- Car rims -- Specification for
metric series rims
Tyres and wheels -- Rim profiles and
dimensions -- Commercial vehicle rims -Specification for metric series rims
Tyres and wheels -- Rim profiles and
dimensions -- Off-the-road rims -Specification for narrow and wide base offthe-road vehicles rims
BS EN 61621 Dry, solid insulating
materials - Resistance test to high-voltage,
low-current arc discharges
Tyres and wheels -- Rim profiles and
dimensions -- Moped rims -- Specification
for moped rims
Gearbox flanges -- Specification for
dimensions for type A gearbox flanges for
BS AU 214 : Part 3
BS AU 50 : Part 4 : Section 5 : Subsection
5.1
BS AU 50 : Part 4 : Section 6 : Subsection
6.2a
BS AU 50 : Part 4 : Section 6 : Subsection
6.3
BS EN 61234-2
BS AU 215 : Part 1
BS AU 215 : Part 2
BS AU 215 : Part 3
BS AU 218
BS EN ISO 11102-2
BS AU 262 : Part 1
BS AU 262 : Part 2
BS AU 265 : Part 2
BS AU 170
BS 5767
commercial vehicles and buses
Gearbox flanges -- Specification for
dimensions for type S gearbox flanges for
commercial vehicles and buses
Tyres and wheels -- Rim profiles and
dimensions -- Industrial vehicle rims -Specification for profiles and dimensions
for code-designated series tyres
Tyres and wheels -- Rim profiles and
dimensions -- Motor cycle rims -Specification for metric series 100, 90, 80,
70, 60, 55 and 50 rims
Tyres and wheels -- Rim profiles and
dimensions -- Motor cycle rims -Specification for code designated series
(diameter codes 4 to 12) rims
BS EN 61234-2 Electrical insulating
materials - Methods of test for hydrolytic
stability - Part 2 : Moulded thermosets
Power take offs (PTOs) -- Specification for
dimensions for clearance envelope for
commercial road vehicles
Specification for dimensions of side
openings for commercial road vehicles
Specification for dimensions of
connections of rear mounted power take
offs for commercial road vehicles
Specification for automotive synchronous
belt drives
BS EN ISO 11102-2 Reciprocating internal
combustion engines - Handle starting
equipment - Part 2 : Method of testing the
angle of disengagement
Road vehicles. Sheath-type glow-plugs
with conical seating and their cylinder head
housing -- M14 X 1,25 glow-plugs
Road vehicles. Sheath-type glow-plugs
with conical seating and their cylinder head
housing -- M12 X 1.25 glow-plugs
Road vehicles. Ignition systems -Electrical performance and function test
methods
Methods for measurement of reflectance of
rear view mirrors
Guide for storage and handling of conveyor
belts
BS AU 178a
BS AU 181
BS AU 182
BS AU 183
BS AU 185
BS 5801
BS AU 186a
BS AU 200 : Part 1a
BS 6591
BS AU 202b
BS 6592
BS AU 207
BS AU 200 : Part 2a
BS 6593
BS AU 209 : Part 0
BS AU 209 : Part 1a
BS AU 209 : Part 2
BS AU 209 : Part 3
BS 6849
BS AU 209 : Part 4
BS AU 209 : Part 5
Specification for road vehicle safety glass
Specification for interface dimensions for
demountable vehicle body systems
Specification for plastics safety glazing
materials for use in road vehicles
Specification for passive seat belt systems
Specification for seat booster cushions
Specification for flat-top chains and
associated chainwheels for conveyors
Specification for carry cot restraints
Spray reducing devices for heavy goods
vehicles -- Specification for design of
containment devices
Specification for scraper bars for chain
conveyers for mining
Specification for rearward-facing restraint
systems for infants, for use in road vehicles
Specification for drive sprocket assemblies
for chain conveyers for mining
Specification for dimensions of car radio
installation space
Spray reducing devices for heavy goods
vehicles -- Specification for performance of
suppression material and devices, and
air/water separating material amd devices
Code of practice for on-site nonmechanical jointing of plied textile and
steel reinforced conveyer belting
Vehicle security -- Guide to the application
of security devices/systems to vehicles
Vehicle security -- Specification for
locking systems for passenger cars and car
derived vehicles
Vehicle security -- Specification for
security systems against theft of in-car
equipment for entertainment
Vehicle security -- Specification for
security marking of glazing for passenger
cars and car derived vehicles
Specification for drop-forged rivetless
chains for conveyors
Vehicle security -- Specification for
security glazing for passenger cars and car
derived vehicles
Vehicle security -- Specification for central
power locking systems for passenger cars
BS AU 209 : Part 6a
BS AU 210 : Part 1
BS AU 225
BS AU 251
BS ISO 1275
BS AU 1c
BS AU 2a
BS AU 5
BS AU 27
BS AU 28
BS AU 29
BS EN ISO 11102-1
BS AU 146b
BS AU 166
BS AU 187
BS AU 138a
and car derived vehicles
Vehicle security -- Specification for
locking systems for passenger cars and car
derived vehicles
Drawbars for caravans and light trailers -Method calculation for the mechanical
strength of steed drawbars
Specification for dimensions of steering
ball joints of commercial road vehicles
Specification for performance of
automotive laminated windscreen repair
systems
Double-pitch precision roller chains and
sprockets for transmission and conveyors
Specification for dimensions of '50' fifth
wheel king pin for semi-trailers
Specification for dimensions of 3« - 4« in
diameter fifth wheel king pin for use with
extra heavy duty semi-trailers
Specification for dimensions of a `contact'
type coupling for vaccum and pressure
braking system on trailers and semi-trailers
Specification for towing hook for use
between trailers of 5-35 tons gross weight
and towing vehicle
Specification for towing jaw for use
between trailers of 5-35 tons gross weight
and towing vehicle
Specification for drawbar eyes and
forecarriage pins for connection between
trailers of 5-35 tons gross weight and
towing vehicle
BS EN ISO 11102-1 Reciprocating internal
combustion engines - Handle starting
equipment - Part 1 : Safety requirements
and tests
Specification for standard automatic rollertype coupling for semi-trailers not
exceeding 7¬ tons laden weight
Specification for road vehicles - mounting
of mechanical coupling devices on rear
cross members of trucks
Specification for tow rope assemblies for
towing passenger cars and light vans
Specification for dimensions of `contact'
type couplings for air pressure braking
BS ISO 14315
BS EN 61725
BS AU 188
BS AU 190
BS EN 20284
BS AU 210 : Part 2
BS AU 219
BS AU 220
BS EN 20340
BS AU 235 : Part 1
BS AU 235 : Part 2
BS AU 239
BS AU 241
BS EN 28094
BS AU 245
BS 3810 : Part 3
systems on trailers and semi-trailers and
their towing vehicles, and the arrangement
of these couplings on articulated and
drawbar combinations
BS ISO 14315 Specification for industrial
wire screens
BS EN 61725 Analytical expression for
daily solar profiles
Specification for anchorages for towing
ropes, cables or bars for road vehicles
Specification for interface dimensions and
fixing bolts for the mounting of overrun
devices on delta shaped drawbars of trailers
up to 2000 kg
Conveyor belts. Electrical conductivity.
Specification and method of test
Drawbars for caravans and light trailers -Specification for the design of aluminium
drawbars and chassis
Specification for dimensions of 40 mm
drawbar couplings between commercial
road vehicles and trailers
Specification for dimensions of 50 mm
drawbar couplings between commercial
road vehicles and trailers
Conveyor belts. Flame retardation.
Specifications and test method
Fifth wheel couplings for commercial
vehicles -- Specification for test conditions
and strength requirements
Fifth wheel couplings for commercial
vehicles -- Method of testing strength of
coupling pins
Method of testing strength of drawbar
couplings and eyes for hinged drawbars
Specification for mechanical coupling
between tractors and semi-trailers :
interchangeability
Steel cord conveyer belts. Adhesion
strength test of the cover to the core layer
Specification for front towing attachments
for commercial road vehicles and buses
over 3.5 t
Glossary of terms used in materials
handling -- Terms used in connection with
pneumatic and hydraulic handling
BS AU 141a
BS AU 257
BS AU 150b
BS AU 226
BS AU 248
BS AU 249
BS AU 252
BS AU 211
BS AU 61
BS AU 153
BS AU 260 : Part 4
BS AU 261
BS AU 234
BS AU 263
BS AU 264
BS AU 259
DD ENV 50269
BS 3726
BS 4337
Specification for the performance of diesel
engines for road vehicles
Code of practice for remanufacture of spark
and compression ignition engines
Specification for automotive V-belts and
pulleys
Specification for nominal dimensions and
tolerances of flywheel housings for
reciprocating internal combustion engines
Specification for automotive V-ribbed belt
drives. Dimensions of pulleys and belts of
PK profile
Specification for clutch housings for
reciprocating internal combustion engines.
Nominal dimensions and tolerances
Specification for diametral pitch starter
motor pinions for road vehicles
Specification for dimensions of four-hole
flanges for gear-driven air compressors for
commercial vehicles and buses
Specification for hydraulic governor for
size N fuel injection pump
Specification for fuel injection high
pressure pipe fittings
Fuel injection equipment. Vocabulary -High-pressure pipes and end-connections
Diesel engines. High-pressure fuel
injection pipe end-connections with 60ø
female cone
Methods of test and general requirements
for road vehicle starter motors
Road vehicles. M14 X 1,25 compact sparkplugs with conical seating and their
cylinder head housing
Road vehicles. M18 X 1,5 spark-plugs with
conical seating and their cylinder head
housing
Specification for components for
commercial vehicles and buses. Crosstooth propeller shaft flanges, type T
DD ENV 50269 Assessment and
representative testing of high-voltage
machines
Specification for counterbalanced lift
trucks-stability-basic tests
Specification for principal dimensions of
BS 4430 : Part 2
BS 4436
BS 5639 : Part 1
BS 5639 : Part 3
DD ENV 12908
BS ISO 11788-1
BS 5639 : Part 5
BS 5777
BS 5829
BS 5933
BS 7178
BS AU 50 : Part 1 : Section 5 : Subsection
5.1
BS AU 179
BS AU 192
BS AU 199
BS ISO 11788-1
BS EN 55011
hand-operated stillage trucks
Recommendations for The safety of
powered industrial trucks - Operation and
maintenance
Specification for reach and straddle fork lift
trucks - stability tests
Fork arms for fork lift trucks -- Vocabulary
for hook-on type fork arms
Fork arms for fork lift trucks -Recommendations for dimensions of fork
arms
DD ENV 12908 Lead and lead alloys Analysis by Optical Emission
Spectrometry (OES) with spark excitation
BS ISO 11788-1 Electronic data
interchange between information systems
in agriculture - Agricultural data element
dictionary - Part 1 : General description
Fork arms for fork lift trucks -- Guide for
inspection and repair of fork arms in
service
Methods of test for verification of stability
of pallet stackers and high lift platform
trucks
Specification for control symbols for
powered industrial trucks
Specification for overhead guards for highlift rider trucks
Specification for construction and layout of
pedals of self-propelled industrial trucks
sit-down rider-controlled
Tyres and wheels -- Tyres -- Industrial
vehicle tyres -- Specification for codedesignated series tyres
Specification for dimensional codes for
passenger cars
Glossary of terms for masses and
dimensions of caravans
Specification for location of hand controls,
indicators and tell-tales in passengers cars
BS ISO 11788-1 Electronic data
interchange between information systems
in agriculture - Agricultural data element
dictionary - Part 1 : General description
BS EN 55011 Limits and methods of
measurement of radio disturbance
BS AU 50 : Part 1 : Section 5 : Subsection
5.2
BS AU 50 : Part 1 : Section 5 : Subsection
5.3
BS AU 50 : Part 1 : Section 5 : Subsection
5.4
BS AU 50 : Part 1 : Section 5 : Subsection
5.6
BS AU 223a
BS AU 243 : Part 1
BS AU 247
BS AU 154a
BS AU 165a
BS 4345
BS 6989
BS 7611
BS AU 242
BS 1761
BS 5279
BS 5485 : Part 2
BS 5528
characteristics of industrial, scientific and
medical (ISM) radio-frequency equipment
Tyres and wheels -- Tyres -- Industrial
vehicle tyres -- Specification for pneumatic
tyres (metric series) on 5ø tapered or flat
base rims : designation, dimensions and
marking
Tyres and wheels -- Tyres -- Industrial
vehicle tyres -- Specification for pneumatic
tyres (metric series) on 5ø tapered or flat
base rims : load ratings
Tyres and wheels -- Tyres -- Industrial
vehicle tyres -- Specification for solid tyres
(metric series) for pneumatic tyre rims:
designation, dimensions and marking
Tyres and wheels -- Tyres -- Industrial
vehicle tyres -- Specification for cylindrical
and conical base rubber solid tyres (metric
series), designation, dimensions and
marking
Specification for portable wheel ramps for
cars and light vans
Methods of test for electrical disturbance
by conduction and coupling -- General
Method of test for lateral stability of
passenger car/trailer combinations
Specification for hydraulic trolley jacks
Specification for performance requirements
for original equipment jacks for passenger
cars and light vans
Specification for slotted angles
Guide to safety of storage equipment for
loose bulk materials
Specification for potato storage boxes for
mechanical handling
Code of practice of automotive windscreen
repair
Specification for single bucket excavators
of the crawler-mounted friction-driven type
Specification for dimensions of fuel filler
openings of earth-moving machinery
Service tools used with earth-moving
machinery -- Guide to common repair tools
: mechanical pullers and pushers
Specification for operator's controls on
excavators used for earth-moving
BS 5538
BS 5631
BS 5982
BS 6060
BS 6061
BS 6113
BS 6197
BS 6211
BS 6218
BS 6228
BS 6264
BS EN 55014-1
BS 6300
BS 6419
BS 6421
BS 6422
BS 6486
Specification for minimum operator space
envelope for earth-moving machinery
Specification for earth moving machinery
and tractors and machinery for agriculture
and forestry - seat index point
Method for determination of ground speed
of earth-moving machinery
Specification for nipple-type lubrication
fittings for earth-moving machinery
Specification for transportable acetylene
containers
Method for volumetric rating of dumper
bodies used for earth-moving
Methods for preservation and storage of
earth-moving machinery
Specification for operator's controls for
earth-moving machinery : crawler tractors
and crawler loaders
Specification for performance requirements
for seat belts and seat belt anchorages for
earth-moving machinery fitted with rollover protective structures
Guide to format and content of manuals on
operation and maintenance for earthmoving machinery
Guide to procedure for operator training for
earth-moving machinery
BS EN 55014-1 Electromagnetic
compatibility - Requirements for household
appliances, electric tools and similar
apparatus - Part 1 : Emission - Product
family standard
Methods of measuring the masses of whole
machines, their equipment and components
of earth-moving machinery
Method for measurement of drawbar pull
of earth-moving machinery
Method for volumetric rating of hoe type
buckets of hydraulic excavators used for
earth-moving
Method for volumetric rating of loader and
front loading excavator buckets used for
earth-moving
Method for measurement of turning
dimensions of wheeled earthmoving
machinery
BS 6490
BS 6544
BS 6574
BS 6685
BS 6812 : Part 1
BS 6812 : Part 2
BS 6812 : Part 3
BS 6911 : Part 7
BS 6911 : Part 1
BS 6911 : Part 2
BS 6911 : Part 3
BS 6911 : Part 4
BS MA 13
BS EN 61169-1
BS EN 61021-1
Specification for shapes and dimensions
(excluding thread dimensions) of plough
bolt heads for earth-moving machinery
Specification for holes in dozer end bits for
earth moving machinery
Guide to training of mechanics concerned
with the operation and maintenance of
earth-moving machinery
Glossary of terms for loaders used for
earth-moving
Airborne noise emitted by earth-moving
machinery -- Method of measurement of
exterior noise in a stationary test condition
Airborne noise emitted by earth-moving
machinery -- Method of measurement at
the operator's position in a stationary test
condition
Airborne noise emitted by earth-moving
machinery -- Method of measurement of
exterior noise in dynamic test conditions
Testing earth-moving machinery -- Testing
of earth-moving machinery. Specification
for units of measurement and tolerances
Testing earth-moving machinery -- Method
for determination of volumetric rating of
crawler and wheel tractor dozer blades
Testing earth-moving machinery -Measurement of tool forces and tipping
loads of loaders
Testing earth-moving machinery -Measurement of tool forces of hydraulic
excavators
Testing earth-moving machinery -- Method
for the evaluation of engine power output
Recommendations for the co-ordination of
dimensions in shipbuilding : glossary of
terms
BS EN 61169-1 Harmonized system of
quality assessment for electronic
components - Radio-frequency connectors Part 1 : Generic specification - General
requirements and measuring methods
BS EN 61021-1 Laminated core packages
for transformers and inductors used in
telecommunication and electronic
equipment - Part 1 : Specification for
BS EN 61021-1
BS MA 14
BS MA 44
BS MA 45
BS MA 77
BS MA 87 : Part 1
BS MA 87 : Part 2
BS EN SP 12068-1
BS 6912 : Part 1
BS 6912 : Part 10
BS 6912 : Part 11
BS MA 97
BS 6912 : Part 12
BS 6912 : Part 13
BS 6912 : Part 14
dimensions
BS EN 61021-1 Laminated core packages
for transformers and inductors used in
telecommunication and electronic
equipment - Part 1 : Specification for
dimensions
Recommendations for the co-ordination of
dimensions in shipbuilding : co-ordinating
sizes for components and assemblies
Recommendations for the co-ordination of
dimensions in shipbuilding : principles of
dimensional co-ordination
Recommendations for the co-ordination of
dimensions in shipbuilding : controlling
dimensions
Recommendations for the co-ordination of
dimensions in shipbuilding : co-ordinating
sizes for services
Series 1 shipborne barges -- Specification
for main dimensions
Series 1 shipborne barges -- Specification
for principal technical requirements
BS EN ISP 12068-1 Information
technology - International Standardized
Profile FDI 4 - Directory data definitions Use of the Directory for OSI TP - Part 1 :
FDI 41 - Basic naming and addressing
Safety of earth-moving machinery -Specification for hydraulic excavator and
backhoe loader boom lowering control
device
Safety of earth-moving machinery -Specification for steering capability of
rubber tyred earth-moving machines
Safety of earth-moving machinery -Requirements for lift arm support devices
Specification for roll on/roll off ship-toshore connection : interface between
terminals and ships with straight stern/bow
ramps
Safety of earth-moving machinery -Evaluation of operator's field of view
Safety of earth-moving machinery -Acceptance criteria for operator's field of
view
Safety of earth-moving machinery --
BS 6912 : Part 15
BS MA 99 : Part 1
BS 6912 : Part 16
BS 6912 : Part 17
BS 6912 : Part 18
BS 6912 : Part 2
BS 6912 : Part 3
BS 6912 : Part 4
BS 6912 : Part 6
BS MA 104 : Part 1
BS 6912 : Part 7
BS 6912 : Part 8
BS EN ISP 12068-2
BS MA 105 : Part 1
Specification for laboratory tests and
performance requirements of roll-over
protective structures
Safety of earth-moving machinery -Specification for access systems
Series 4 shipborne barges -- Specification
for main dimensions
Safety of earth-moving machinery -Specification for dumper body support and
operator's cab tilt support devices
Safety of earth-moving machinery -Specification for laboratory evaluation of
operator seat vibration
Safety of earth-moving machinery -Specification for bluntness of edges at the
operator station and in maintenance areas
Safety of earth-moving machinery -Specification for rated operating load for
crawler and wheel loaders
Safety of earth-moving machinery -- Sound
test method for machine-mounted forward
and reverse warning alarm
Safety of earth-moving machinery -Specification for key-locked starting
systems
Safety of earth-moving machinery -Specification for falling-object protective
structures on earth-moving machinery :
Laboratory tests and performance
requirements
Series 2 shipborne barges -- Specification
for main dimensions
Safety of earth-moving machinery -Specification for laboratory evaluations of
roll-over and falling-object protective
structures : the deflection-limiting volume
for earth-moving machinery
Safety of earth-moving machinery -Specification for performance requirements
of an articulated frame locking device
BS EN ISP 12068-2 Information
technology - International Standardized
Profile FDI 4 - Directory data definitions Use of the Directory for OSI TP - Part 2 :
FDI 42 - Enhanced naming and addressing
Series 3 shipborne barges -- Specification
BS 6912 : Part 9
BS MA 105 : Part 2
BS 6913 : Part 1
BS MA 11
BS 6913 : Part 5
BS 6913 : Part 7
BS MA 46
BS 6913 : Part 8
BS 6913 : Part 9
BS MA 59
BS MA 6
BS MA 7
BS 6913 : Part 10
BS 6913 : Part 11
BS 6913 : Part 12
BS 6913 : Part 3
BS MA 24
for main dimensions
Safety of earth-moving machinery -Methods for the calculation and
verification of the lift capacity of hydraulic
excavators
Series 3 shipborne barges -- Specification
for main operational and technical
requirements
Operation and maintenance of earthmoving machinery -- Guide to common
maintenance and adjustment service tools
Specification for horncleats
Operation and maintenance of earthmoving machinery -- Specification for
diagnostic ports
Operation and maintenance of earthmoving machinery -- Glossary for machine
availability
Specification for cast iron mudboxes
Operation and maintenance of earthmoving machinery -- Specification for
common symbols for operator controls and
other displays
Operation and maintenance of earthmoving machinery -- Specification for
specific symbols for machines, equipment
and accessories
Specification for sea tubes
Specification for internal doors and flames
Specification for manholes with bolted
covers
Operation and maintenance of earthmoving machinery -- Specification for
drain, fizz and level plugs
Operation and maintenance of earthmoving machinery -- Specification for
auxiliary starting aid electrical connector
Operation and maintenance of earthmoving machinery -- Specification for a
product identification numbering system
Operation and maintenance of earthmoving machinery -- Specification for
principal shapes and basic dimensions for
cutting edges for tractors with dozer,
graders and tractor scrapers
Specification for ships's side scuttles
BS 6913 : Part 6
BS MA 37
BS MA 38
BS MA 39 : Part 1
BS MA 39 : Part 2
BS MA 39 : Part 3
BS MA 71
BS 6914 : Part 1
BS 6914 : Part 2
BS MA 75 : Part 2
BS 6914 : Part 3
BS 6914 : Part 4
BS 6914 : Part 5
BS 6914 : Part 6
BS MA 9
BS 6914 : Part 7
Operation and maintenance of earthmoving machinery -- Specification for
identification and marking of electrical
wires and cables
Specification for external doors (wood) for
ships
Specification for weathertight and
spraytight doors (steel)
Ladders, steel vertical
Specification for ships' ladders -- Ladders,
steel sloping
Ladders, steel dog-step
Recommendations for the co-ordination of
dimensions in shipbuilding : co-ordinating
spaces for internal subdivision
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Glossary of terms for basic
types of earth-moving machinery
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Glossary of terms for base
machine
Specification for bulkhead pieces and tank
pads -- Bulkhead pieces of ductile iron
(spheroidal graphite iron)
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Glossary of terms for
equipment
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Glossary for dumpers
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Glossary for pipelayers
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Terminology for selfpropelled crawler and wheel tractors and
their equipment
Flanges, bolting and gaskets for exhaust
gas, piping for diesel engines and boiler
uptakes
Terminology (including definitions of
dimensions and symbols) for earth-moving
BS 6914 : Part 8
BS MA 86
BS MA 5
BS MA 18
BS MA 26
BS MA 27
BS MA 49
BS MA 60
BS MA 61
BS MA 62
BS MA 94
BS MA 10
BS MA 17
BS MA 19
BS MA 20
BS MA 21
BS MA 22
BS MA 23
BS MA 34
BS MA 36
BS MA 47
BS MA 48
BS MA 53
BS MA 55
machinery -- Vocabulary, symbols and
units for machine performance
Terminology (including definitions of
dimensions and symbols) for earth-moving
machinery -- Terminology and commercial
specifications for hydraulic excavators
Glossary of terms used in shipbuilding : list
of equivalent terms for ship screw
propellers
Specification for brass service nameplates
for valves
Specification for salt water piping systems
in ships
Specification for suction strainers
Specification for sight-flow indicators for
tank overflow systems
Summary and application of carbon steel
tubes for marine pipework systems
Summary and application of copper and
copper alloy tubes for ships' pipework
systems
Specification for bilge drain and suction
hats
Specification for weed grids for sea inlets
Specification for thermal insulation for
marine piping systems
Specification for oval eyeplates
Specification for derrick boom clamp
Specification for Panama-type fairleads
Specification for presentation of ships'
cargo gear particulars
Specification for deck-end roller fairleads
Specification for cast roller fairleads
Specification for multi-angle roller
fairleads
Specification for ships' deck machinerycapstans
Specification for ships' deck machinerytopping winches
Code of practice for ships' cargo blocks
Code of practice for design and operation
of ships' derrick rigs
Specification for ships' deck machinerytowing winches for deep sea use
Specification for ships' deck machinerylifeboat winches
BS MA 56
BS MA 57
BS MA 79
BS MA 81
BS MA 8
BS 6200 : Part 3 : Section 3.11 :
Subsection 3.
BS MA 12 : Part 1
BS MA 12 : Part 2
BS MA 28
BS MA 30
BS MA 31
BS MA 33
BS MA 35
BS MA 40 : Part 1
BS MA 40 : Part 3
BS MA 41
BS MA 42
BS MA 70 : Part 1
BS 6200 : Part 3 : Section 3.22 :
Subsection 3.
Specification for ships' deck machineryanchor cable stoppers
Specification for ships' deck machineryrope storage reels
Specification for jib cranes : ship mounted
type
Specification for ship's derrick fittings
Specification for small weathertight
hatches
BS 6200 : Part 3 : Section 3.11 :
Subsection 3.11.3 Sampling and analysis of
iron, steel and other ferrous metals - Part 3
: Methods of analysis - Section 3.11 :
Determination of cobalt - Subsection 3.11.3
: Flame atomic absorption spectrometric
method .3
Specification for welded steel bollards -Vertical type
Specification for welded steel bollards -Cruciform type
Specification for dimensions of tracks for
mast and deck fittings
Glossary of terms and graphical symbols
for ships' deck machinery
Specification for ships' deck machinerycargo winches
Specification for ships' deck machinerywarping winches
Specification for ships' deck machinerywindlasses
Specification for marine guardrails,
stanchions, etc -- Guardrails for merchant
ships (excluding passenger ships)
Specification for marine guardrails,
stanchions, etc -- Storm rails (exterior)
Specification for two tonne general purpose
davits
Specification for ships' awnings and
supports
Specification for dimensions of anchor
chain cables -- Stud-link anchor chain
cables
BS 6200 : Part 3 : Section 3.22 :
Subsection 3.22.4 Sampling and analysis of
iron, steel and other ferrous metals - Part 3
: Methods of analysis - Section 3.22 :
BS MA 78
BS MA 87 : Part 3
BS MA 88
BS MA 89
BS MA 90
BS MA 92
BS MA 93
BS MA 72
BS MA 73
BS MA 101
BS MA 103
BS MA 105 : Part 3
BS MA 2 : Part 1
BS MA 2 : Part 2
BS MA 2 : Part 3
BS MA 2 : Part 8
BS MA 82
Determination of nitrogen - Subsection
3.22.4 : Thermal conductimetric method
after fusion in
Specification for aluminium shore
gangways
Series 1 shipborne barges -- Specification
for the arrangement, dimensions and
method of test for lifting post castings
Specification for heated glass panes for
ships' windows
Specification for accommodation ladders
Specification for embarkation ladders
Specification for pilot ladders
Code of practice for structural safety of
deck machinery installation
Recommendations for the co-ordination of
dimensions in shipbuilding : co-ordinating
spaces for furniture
Recommendations for the co-ordination of
dimensions in shipbuilding : co-ordinating
sizes for fixtures, fittings and equipment
Specification for toilet retention and
recirculation systems for the treatment of
toilet waste on small craft
Specification for design conditions and
basis of calculations for air-conditioning
and ventilation of accommodation spaces
in ships
Series 3 shipborne barges -- Specification
for principal mating dimensions for the
ventilating system
Magnetic compasses and binnacles -Specification for class A magnetic
compasses, their binnacles and azimuth
reading devices (including test procedures)
Magnetic compasses and binnacles -- Class
B instruments
Magnetic compasses and binnacles -Recommendations for the positioning of
compasses
Magnetic compasses and binnacles -Specification for transmitting systems and
off-course alarms for class A magnetic
compasses
Specification for shipbuilding - oil and
water drain screws
BS MA 98 : Part 1
BS MA 16
BS MA 29
BS AU 50 : Part 4 : Section 3 : Subsection
3.1
BS EN 474-1
BS 3388
BS EN 71-3
BS EN 71-5
BS 7044 : Part 1
BS 6200 : Part 3 : Section 3.5 : Subsection
3.5
BS 7044 : Part 2 : Section 2.1
BS 7044 : Part 2 : Section 2.2
BS EN 60062
BS ISO 12639
BS 7044 : Part 2 : Section 2.4
BS 7044 : Part 2 : Section 2.5
BS ISO 9838
BS ISO 10045
BS ISO 10228
Multi-bucket dredgers -- Specification for
scale of bucket capacities
Specification for inflatable boats (manual
or motor propelled)
Specification for steel wire rope and strand
for yachts
Tyres and wheels -- Rim profiles and
dimensions -- Off-the-road rims -Specification for narrow and wide base offthe-road vehicles rims
Earth-moving machinery. Safety -- General
requirements
Specification for forks, shovels and spades
Safety of toys -- Specification for
migration of certain elements
Safety of toys -- Chemical toys (sets) other
than experimental sets
Artificial sports surfaces -- Classification
and general introduction
BS 6200 : Part 3 : Section 3.5 : Subsection
3.5.3 Sampling and analysis of iron, steel
and other ferrous metals - Part 3 : Methods
of analysis - Section 3.5 : Determination of
boron - Subsection 3.5.3 : Curcumin
spectrophotometric method after distillatio
Artificial sports surfaces -- Methods of test
-- Methods for determination of
ball/surface interaction
Artificial sports surfaces -- Methods of test
-- Methods for determination of
person/surface interaction
BS EN 60062 Marking codes for resistors
and capacitors
BS ISO 12639 Graphic technology Prepress digital data exchange - Tag image
file format for image technology (TIFF/IT)
Artificial sports surfaces -- Methods of test
-- Methods for determination of
environmental resistance
Artificial sports surfaces -- Methods of test
-- Miscellaneous
Alpine ski-bindings. Test soles for skibinding tests
Alpine skis. Binding mounting area.
Requirements for test screws
Cross-country skis. Binding mounting area.
BS ISO 11088
BS 1892 : Part 1
BS ISO 12639
BS 1892 : Part 2 : Section 2.11
BS 1892 : Part 2 : Section 2.6
BS 1892 : Part 2 : Section 2.7
BS 1892 : Part 2 : Section 2.8
BS ISO 12156-1
BS 1892 : Part 2 : Section 2.9
BS 3104
BS 4001 : Part 2
BS 4423
BS ISO 8600-4
BS 4001 : Part 1
BS 5993
BS 6183 : Part 1
Requirements for test screws
Assembly, adjustment and inspection of an
alpine ski-binding-boot (S-B-B) system
Gymnasium equipment -- Specification of
general requirements
BS ISO 12639 Graphic technology Prepress digital data exchange - Tag image
file format for image technology (TIFF/IT)
Gymnasium equipment -- Particular
requirements -- Specification for practice
and games netting and supporting
trackways
Gymnasium equipment -- Particular
requirements -- Specification for boxing
rings
Gymnasium equipment -- Particular
requirements -- Specification for basketball
and mini-basketball equipment
Gymnasium equipment -- Particular
requirements -- Specification for
trampolines, mini-trampolines and safety
harnesses (trampoline spotting rig)
BS ISO 12156-1 Diesel fuel - Assessment
of lubricity using the high-frequency
reciprocating rig (HFRR) - Part 1 : Test
method
Gymnasium equipment -- Particular
requirements -- Specification for weight
training equipment
Specification for polyamide (nylon)
mountaineering ropes
Care and maintenance of underwater
breathing apparatus -- Standard diving
equipment
Specification for climbers' helmets
BS ISO 8600-4 Optics and optical
instruments - Medical endoscopes and
endoscopic accessories - Part 4 :
Determination of maximum width of
insertion portion
Care and maintenance of underwater
breathing apparatus -- Sizes of paper and
board Recommendations for the
compressed air open circuit type
Specification for cricket balls
Protective equipment for cricketers --
BS EN ISO 11885
BS 6366
BS 6635
BS 7323
BS 7661
BS ISO 11416
BS EN 393
BS EN 394
BS EN 395
BS EN 396
BS EN 399
BS EN 564
BS EN 565
BS EN 566
BS EN 567
BS EN 568
BS EN 569
BS 3456 : Part 3 : Section 3.21
BS 6728 : Part 1
BS 2087 : Part 1
Specification for batting gloves, leg guards
and boxes
BS EN ISO 11885 Water quality Determination of 33 elements by
inductively coupled plasma atomic
emission spectroscopy
Specification for studs for rugby football
boots
Specification for saddle trees made from
wood
Specification for sit harnesses for rock
climbing
Specification for inflatable armbands worn
as flotation aids
Tennis rackets. Racket components and
physical parameters
Lifejackets and personal buoyancy aids.
Buoyancy aid 50
Lifejackets and personal bouyancy aids.
Additional items
Lifejackets and personal buoyancy aids.
Lifejacket 100
Lifejackets and personal buoyancy aids.
Lifejacket 150
Lifejackets and personal buoyancy aids.
Lifejacket 275
Mountaineering equipment. Accessory
cord. Safety requirements and test method
Mountaineering equipment. Tape. Safety
requirements and test method
Mountaineering equipment. Slings. Safety
requirements and test method
Mountaineering equipment. Rope clamp.
Safety requirements and test method
Mountaineering equipment. Ice anchors.
Safety requirements and test method
Mountaineering equipment. Pitons. Safety
requirements and test method
Specification for safety of household and
similar electrical appliances Complete
particular specifications Portable
immersion heaters
Thermoplastics hot water bottles -Specification for hot water bottles
manufactured from PVC compounds
Preservative textile treatments --
BS 2087 : Part 2
BS ISO 4921
BS EN ISO 10528
BS 1425
BS 1425 : Part 1
BS 1425 : Part 2
BS 2545
BS 4029
BS 4044
BS 4784 : Part 1
BS 4784 : Part 3
BS 6176
BS 7506 : Part 2
BS 2043
BS 2610
BS 2889
Specification for treatments
Preservative textile treatments -- Methods
of test
Knitting. Basic concepts. Vocabulary
Textiles. Commercial laundering procedure
for textile fabrics prior to flammability
testing
Specification for cleanliness of fillings and
stuffings for bedding, upholstery, toys and
other domestic articles
Cleanliness of fillings and stuffings for
bedding, upholstery and other domestic
articles -- Specification for fillings and
stuffings other than feather and/or down
Cleanliness of fillings and stuffings for
bedding, upholstery and other domestic
articles -- Specification for feather and/or
down fillings and stuffings
Methods of fibre sampling for testing
Method of test for the determination of
tensile elastic recovery of single fibres and
filaments (constant-rate-of-extension
machines)
Methods for determination of fibre length
by comb sorter diagram
Methods for determination of commercial
mass of consignments of textiles -- Mass
determination and calculations
Methods for determination of commercial
mass of consignments of textiles -Specimen cleaning procedures
Method for determination of length and
length distribution of staple fibres by
measurement of single fibres
BS 7506 : Part 2 Methods for
Measurements in electrostatics - Part 2 :
Test methods
Method for the determination of wool fibre
fineness by the use of a projection
microscope
Method of test for the determination of the
cuprammomium fluidity of cotton and
certain cellulosic man-made fibres
Method for the determination of trash
content of cotton and for trash and lint
content of waste intended for spinning, by
BS 3085
BS 3181 : Part 1
BS 3183
BS 3477
BS 3568
BS 3582
BS 3584
BS 4032
BS 5116
BS 5182
BS 6645
BS 6981
BS EN ISO 10306
BS 4815
BS 947
BS 1051
BS 3266
BS 3870 : Part 1
the Shirley analyser
Method for evaluation of the maturity of
cotton fibres (microscopic method)
Methods for determination of cotton fibre
properties by the airflow method -Determination of micronaire value by the
single compression airflow method
Method for the determination of wool fibre
diameter by the airflow method
Method for the determination of oils, fats
and waxes in cotton
Method for determination of solubility of
wool in alkali
Method for determination of oils, fats and
waxes in wool
Determination of solubility of wool in
urea-bisulphite solution
Method of test for the determination of
certain water- or alkali-soluble additives in
cellulosic or synthetic fibres, yarns and
fabrics or yarns and fabrics made from
blends of such fibres
Method of test for determination of
breaking tenacity of flat bundles of cotton
fibres
Method for the measurement of the length
of wool fibres processed on the worsted
system, using a fibre diagram machine
Method for determination of alkali
solubility of flax materials
Method for determination of acid content
of wool
Textiles. Cotton fibres. Evaluation of
maturity by the air flow method
Glossary of generic names for man-made
fibres
Specification for a universal system for
designating linear density of textiles (Tex
system)
Glossary of terms relating to the mass
determination of textiles
Methods of test for determination of
conductivity, pH, water-soluble matter,
chloride and sulphate in aqueous extracts of
textile materials
Stitches and seams -- Classification and
BS 3870 : Part 2
BS 4658
BS 4745
BS 4784 : Part 2
BS 5742
BS 6085
BS EN 10147
BS EN ISO 8747
BS EN ISO 8746
BS 6646
BS 6648
BS 6806 : Part 1
BS 6806 : Part 3
BS 6810
BS 6909
PD 6522
PD 6527
PD 6577
BS EN 20105-A02
terminology of stitch types
Stitches and seams -- Classification and
terminology of seam types
Methods of test for textiles - preparation of
laboratory test samples and test specimens
for chemical testing
Method for determination of thermal
resistance of textiles
Methods for determination of commercial
mass of consignments of textiles -Methods for obtaining laboratory samples
Specification for textile labels requiring to
be washed and/or dry cleaned
Methods for determination of the resistance
of textiles to microbiological deterioration
BS EN 10147 Specification for
Continuously hot-dip zinc coated structural
steel strip and sheet - Technical delivery
conditions
BS EN ISO 8747 Grooved pins with
countersunk head
BS EN ISO 8746 Grooved pins with round
head
Method for determination of ash of textiles
Methods for wet ashing of textile materials
for subsequent determination of metal
content
Formaldehyde in textiles -- Method for
determination of total formaldehyde
Formaldehyde in textiles -- Method for
determination of released formaldehyde
Methods for determination of metals in
textiles
Method for generation and counting of the
airborne linting propensity of fabrics in the
dry state
Terms relevant to the feather industry for
fillings for bedding, upholstery and other
domestic articles
Methods of test for textiles (other than
those methods already published as British
Standards)
The influence of environmental conditions
on the testing of textile materials
Textiles. Tests for colour fastness -- Grey
scale for assessing change in colour
BS EN 20105-A03
BS EN 20105-B02
BS EN 20105-C01
PD 6537 : Part 1
BS EN ISO 8745
BS EN ISO 13337
BS EN 20105-C02
BS EN 20105-C03
BS EN 20105-C04
BS EN 20105-C05
BS EN 20105-C06
BS EN 20105-N01
BS EN ISO 105-B05
BS EN ISO 105-D01
BS EN ISO 105-D02
BS EN ISO 105-G01
BS EN ISO 105-N02
BS EN ISO 105-N03
BS EN ISO 105-N04
BS EN ISO 105-N05
Textiles. Tests for colour fastness -- Grey
scale for assessing staining
Textiles. Tests for colour fastness -- Colour
fastness artificial light (xenon arc fading
lamp test)
Textiles. Tests for colour fastness -- Colour
fastness to washing : Test 1
Variability of methods of test for textiles
and reports of interlaboratory trials on
certain methods -- Phase 1 : BS 2576, BS
4303 and ISO 9290
BS EN ISO 8745 Grooved pins - Halflength taper grooved
BS EN ISO 13337 Spring-type straight
pins - Slotted, light duty
Textiles. Tests for colour fastness -- Colour
fastness to washing : Test 2
Textiles. Tests for colour fastness -- Colour
fastness to washing : Test 3
Textiles. Tests for colour fastness -- Colour
fastness to washing : Test 4
Textiles. Tests for colour fastness -- Colour
fastness to washing : Test 5
Textiles. Tests for colour fastness -- Colour
fastness to domestic and commercial
laundering
Textiles. Tests for colour fastness -- Colour
fastness to bleaching : hypochlorite
Textiles. Tests for colour fastness -Detection and assessment of
photochromism
Textiles. Tests for colour fastness -- Colour
fastness to dry cleaning
Textiles. Tests for colour fastness -- Colour
fastness to rubbing : Organic solvents
Textiles. Tests for colour fastness -- Colour
fastness to nitrogen oxides
Textiles. Tests for colour fastness -- Colour
fastness to bleaching : Peroxide
Textiles. Tests for colour fastness -- Colour
fastness to bleaching : Sodium chlorite
(mild)
Textiles. Tests for colour fastness -- Colour
fastness to bleaching : Sodium chlorite
(severe)
Textiles. Tests for colour fastness -- Colour
BS EN ISO 105-P01
BS EN ISO 105-P02
BS EN ISO 105-S01
BS EN ISO 105-S02
BS EN ISO 105-S03
BS EN ISO 105-X09
BS EN ISO 105-X10
BS EN ISO 105-X12
BS EN ISO 105-Z01
BS EN ISO 105-Z02
BS EN ISO 3175
BS EN ISO 3759
BS ISO 4880
BS EN 26330
BS EN 31092
BS 946
BS 984
BS 3845
BS 4134
fastness to stoving
Textiles. Tests for colour fastness -- Colour
fastness to dry heat (excluding pressing)
Textiles. Tests for colour fastness -- Colour
fastness to pleating. Steam pleating
Textiles. Tests for colour fastness -- Colour
fastness to vulcanization. Hot air
Textiles. Tests for colour fastness -- Colour
fastness to vulcanization : Sulfur
monochloride
Textiles. Tests for colour fastness -- Colour
fastness to vulcanization. Open steam
Textiles. Tests for colour fastness -- Colour
fastness to formaldehyde
Textiles. Tests for colour fastness -Assessment of migration of textile colours
into polyvinyl chloride coatings
Textiles. Tests for colour fastness -- Colour
fastness to rubbing
Textiles. Tests for colour fastness -- Colour
fastness to metals in the dye-bath :
chromium salts
Textiles. Tests for colour fastness -- Colour
fastness to metals in the dyebath. Iron and
copper
Textiles. Evaluation of stability to machine
dry-cleaning
Textiles. Preparation, marking and
measuring of fabric specimens and
garments in tests for determination of
dimensional change
Burning behaviour of textiles and textile
products. Vocabulary
Textiles. Domestic washing and drying
procedures for textile testing
Textiles. Determination of physiological
properties. Measurement of thermal and
water-vapour resistance under steady-state
conditions (sweating guarded-hotplate test)
Method for the designation of yarns
Method for determination of net mass of
retail packages of knitting and rug yarns
Method for determination of added oil
content of jute yarn, rove and fabric
Method for designation of ticket numbers
of industrial sewing threads
BS 4611
BS 4881
BS 6125
BS 6157
BS 6189
BS EN ISO 8744
BS 6663
BS 7318
BS EN ISO 2060
BS EN ISO 2062
BS ISO 10290
BS EN 25080
BS 3203
BS 7500
BS 2924 : Part 1
BS 2924 : Part 2
BS 2924 : Part 3
BS 2924 : Part 4
BS 3631
BS 4432 : Part 1
BS 4432 : Part 2
Methods of test for polyolefin tape yarns
Specification for polypropylene film cords,
lines and twines
Specification for natural fibre cords, lines
and twines
Specification for industrial sewing threads
made wholly or partly from synthetic fibres
Glossary of terms relating to fabrics and
associated fibres, yarns and processes
BS EN ISO 8744 Grooved pins - Fulllength taper grooved
Methods for determination of crimp
rigidity of textured nylon yarns
Specification for industrial sewing threads
made from linen (flax) or cotton
Textiles. Yarn from packages.
Determination of linear density (mass per
unit length) by the skein method
Textiles. Yarns from packages.
Determination of single-end breaking force
and elongation at break
Textiles. Cotton yarns. Specifications
Sisal agricultural twines
Glossary of paper, board, pulp and related
terms
Specification for marking of recycled paper
board
Aqueous extracts of paper, board and pulp - Method for determination of pH
Aqueous extracts of paper, board and pulp - Determination of conductivity
Aqueous extracts of paper, board and pulp - Titrimetric method for determination of
water-soluble sulphates
Aqueous extracts of paper, board and pulp - General method for determination of
water-soluble chlorides
Method for determination of ash of paper
and board
Methods for determining optical properties
of pulp, paper and board -- Measurement of
diffuse reflectance factor of paper, board
and pulps
Methods for determining optical properties
of pulp, paper and board -- Measurement of
diffuse blue reflectance factor (ISO
BS 4496
BS 4498
BS 4501
BS 4747 : Part 2
BS EN ISO 8742
BS EN ISO 8743
BS EN ISO 8752
BS 4896
BS 4897:Part 1
BS 4897:Part 3
BS 4897:Part 4
BS 6094 : Part 1
BS 6095
BS 6306 : Part 1
BS 6306 : Part 2
BS 7463 : Part 1
brightness) of paper and board
Method for determination of acid-insoluble
ash of pulp
Method for determination of the Kappa
number of pulp (degree of delignification)
Method for the extraction from pulps of
materials soluble in dichloromethane
Methods for determination of saleable
mass, in lots, of pulp -- Pulps (such as
flash-dried pulps) baled in slabs
BS EN ISO 8742 Grooved pins - Onethird-length centre grooved
BS EN ISO 8743 Grooved pins - Halflength centre grooved
BS EN ISO 8752 Spring-type straight pins
- Slotted, heavy duty
Method for the determination of ash of
pulp
Trace metal contents of pulps -- Method for
determination of calcium content by edta
titrimetric and flame atomic absorption
spectrometric methods
Trace metal contents of pulps -- Method for
determination of iron content by 1,10phenanthroline photometric and flame
atomic absorption spectrometric methods
Trace metal contents of pulps -- Method for
determination of manganese content by
sodium periodate photometric and flame
atomic absorption spectrometric methods
Methods for laboratory beating of pulps -Valley beater method
Methods for determination of the physical
properties of laboratory sheets made from
pulps
Methods for determination of limiting
viscosity number of cellulose in dilute
solutions -- Cupri-ethylene-diamine (CED)
method
Methods for determination of limiting
viscosity number of cellulose in dilute
solutions -- Iron (III) sodium tartrate
complex (EWNN <inf>mod NaCl</inf>)
method
Fibre furnish analysis of paper, board and
pulps -- General method
BS EN ISO 8750
BS 7463 : Part 2
BS 7463 : Part 4
BS 7463 : Part 5
BS 7463 : Part 6
BS 7463 : Part 7
BS ISO 10775
BS EN 20187
BS EN 25264-3
BS 2922 : Part 1
BS EN ISO 8748
BS EN ISO 8741
BS EN ISO 8751
BS 2922 : Part 2
BS 2987
BS 3137
BS 3748
BS 4000 : Part 1
BS 4415 : Part 1
BS EN ISO 8750 Spring-type straight pins
- Coiled, standard duty
Fibre furnish analysis of paper, board and
pulps -- Guide to staining
Fibre furnish analysis of paper, board and
pulps -- Method of test by Graff 'C' stain
Fibre furnish analysis of paper, board and
pulps -- Method of test by Lofton-Merritt
stain (Wisbar modification)
Fibre furnish analysis of paper, board and
pulps -- Determination of fibre coarseness
Fibre furnish analysis of paper, board and
pulps -- Determination of weight factors
Paper, board and pulps. Determination of
cadmium content. Atomic absorption
spectrometric method
Paper, board and pulps. Standard
atmosphere for conditioning and testing
and procedure for monitoring the
atmosphere and conditioning of samples
Pulps. Laboratory beating -- Jokro mill
method
Strength of wet paper and board -- Method
for determination of the bursting strength
of paper and board after immersion in
water
BS EN ISO 8748 Spring-type straight pins
- Coiled, heavy duty
BS EN ISO 8741 Grooved pins - Halflength reverse-taper grooved
BS EN ISO 8751 Spring-type straight pins
- Coiled, light duty
Strength of wet paper and board -- Method
for determination of the tensile strength of
paper and board after immersion in water
Notes on the application of statistics to
paper testing
Methods for determining the bursting
strength of paper and board
Method for determination of resistance to
bending of paper and board
Sizes of paper and board -- Specification
for A and B series of trimmed sizes of
writing paper and certain classes of printed
matters
Determination of the tensile properties of
BS 4420
BS 4574
BS 4816
BS 4817
BS 5131:Part 4: Section 4.1
BS 5131:Part 4: Section 4.2
BS 5131:Part 4: Section 4.3
BS 5131:Part 4: Section 4.4
BS 5131:Part 4: Section 4.5
BS 5131:Part 4: Section 4.13
BS 5131:Part 4: Section 4.12
BS 5477
BS 5879
BS 5880
BS 6225 : Part 2
BS 6225 : Part 1
paper and board -- Constant rate of loading
method
Method for determination of the Bendtsen
roughness of paper and board
Recommendation for the determination of
the ink absorbency of paper and board by
use of K & N ink
Method for the determination of the
puncture resistance of board
Method for the determination of the
thickness of corrugated fibreboard
Methods of test for footwear and footwear
materials -- Other components -Resistance to peeling of insole board
Methods of test for footwear and footwear
materials -- Other components -- Flexing
index of fibreboard
Methods of test for footwear and footwear
materials -- Other components -Resistance of fibre board to stitch-tear
Methods of test for footwear and footwear
materials -- Other components -- Heel pin
holding strength of fibreboard
Methods of test for footwear and footwear
materials -- Other components -- Tensile
strength of fibreboard
Methods of test for footwear and footwear
materials -- Other components -Transverse tensile strength of fibreboard
Methods of test for footwear and footwear
materials -- Other components -- Fastness
of fibreboard finishes to rubbing in the
presence of water and perspiration
Method for visual assessment, by grid
assay, of dirt in paper for character
recognition
Method for measurement of dimensional
change of paper after immersion in water
Method for determination of water
absorption of paper and board after
immersion in water
Method for determining the resistance to
picking of paper and board : accelerating
speed method using the IGT tester -Electric model
Method for determining the resistance to
BS 6388 : Part 1
BS 6504
BS 6538 : Part 1
DD ENV 12017
BS 6538 : Part 2
BS 6538 : Part 3
BS 6563
BS 6712 : Part 1
BS 6712 : Part 2
BS 6890
BS 6965 : Part 1
BS 7325
BS 7406
BS 7424
BS 7427
picking of paper and board : accelerating
speed method using the IGT tester -Pendulum or spring model
Accelerated ageing of paper and board -Method for dry heat treatment at 105øC
Method for determination of water
absorption of paper and board (Klemm
method)
Air permeance of paper and board -Method for determination of air permeance
: general aspects of testing
DD ENV 12017 Medical Informatics Medical Informatics Vocabulary (MIVoc)
Air permeance of paper and board -Method for determination of air permeance
using the Bendtsen apparatus
Air permeance of paper and board -Method for determination of air permeance
using the Gurley apparatus
Method for determination of the roughness
of paper and board by the Parker Print-surf
apparatus
Measurement of hygroexpansivity of paper
and board -- Method for the measurement
of hygroexpansivity up to a maximum
relative humidity of 68%
Measurement of hygroexpansivity of paper
and board -- Method for measurement of
hygroexpansivity up to a maximum relative
humidity of 86%
Method for determination of grease
resistance of paper and board
Creasing properties of carton board -Method for determination of crease
recovery (spring back) of 90ø fold
Method for determination of the
compressive strength of paper and board by
the short span test
Methods for determination of water vapour
transmission rate of sheet materials (paper
and board) by dynamic sweep and static
gas methods
Guide to general principles for
determination of the bending stiffness of
paper and board by static methods
Method for determination of titanium
BS ISO 5626
BS EN ISO 7263
BS ISO 9706
BS ISO 10716
BS ISO 11605
BS EN 643
BS EN 644
BS EN 645
BS EN 646
BS EN 647
BS EN 648
BS EN 920
DD ENV 1798
DD ENV 12017
BS EN 23035
BS 1439
BS 3047
BS 5881
dioxide content of paper and board
Paper. Determination of folding endurance
Corrugating medium. Determination of the
fiat crush resistance after laboratory fluting
Information and documentation. Paper for
documents. Requirements for permanence
Paper and board. Determination of alkali
reserve
Paper and board. Calibration of variablearea flowmeters
List of European standard qualities of
waste paper
Paper. Untrimmed sizes. Primary range and
supplementary range designation and
tolerances. Expression of direction of
manufacture
Paper and board intended to come into
contact with foodstuffs. Preparation of a
cold water extract
Paper and board intended to come into
contact with foodstuffs. Determination of
colour fastness of dyed paper and board
Paper and board intended to come into
contact with foodstuffs. Preparation of a
hot water extract
Paper and board intended to come into
contact with foodstuffs. Determination of
the fastness of fluorescent whitened paper
and board
Paper and board intended to come into
contact with foodstuffs. Determination of
water soluble matter
Paper and board intended to come into
contact with foodstuffs. Determination of
seven specified polychlorinated biphenyls
(PCB)
DD ENV 12017 Medical Informatics Medical Informatics Vocabulary (MIVoc)
Single-faced and single-wall corrugated
fibreboard. Determination of fiat crush
resistance
Specification for single-ply wet-creped
paper towelling
Specification for sizes of posters
Method for determination of grammage of
single layers of solid fibreboard
BS 6456
DD ENV 12017
DD ENV 12018
DD ENV 12018
BS 6616
BS ISO 11093-1
BS ISO 11093-2
BS ISO 11093-3
BS ISO 11093-5
BS ISO 11093-9
BS ISO 13542
BS 5498
BS 1467
BS 1808
BS 4000 : Part 1
BS 4264
BS 4448
BS 4623
BS 5097:Part 1
Glossary of terms for correspondence
envelopes
DD ENV 12017 Medical Informatics Medical Informatics Vocabulary (MIVoc)
DD ENV 12018 Identification,
administrative, and common clinical data
structure for Intermittently Connected
Devices used in healthcare (including
machine readable cards)
DD ENV 12018 Identification,
administrative, and common clinical data
structure for Intermittently Connected
Devices used in healthcare (including
machine readable cards)
Specification for paper and print for optical
character recognition (OCR)
Paper and board. Testing of cores -Sampling
Paper and board. Testing of cores -- Coordinating of test samples
Paper and board. Testing of cores -Determination of moisture content using
the oven drying method
Paper and board. Testing of cores -Determination of characteristics of
concentric rotation
Paper and board. Testing of cores -Determination of fiat crush resistance
Paper and board. Specification for internal
diameters of cores for reels
Specification for the safety of hand
operated paper cutting machines
Specification for folders and files
Specification for cut business forms and
letterheads
Sizes of paper and board -- Specification
for A and B series of trimmed sizes of
writing paper and certain classes of printed
matters
Specification for envelopes for commerce
official and professional use
Specification for school exercise books and
papers
Specification for folded continuous
stationery for impact printers
Specification for loose leaf binders -- Ring
BS EN ISO 10511
BS EN ISO 10512
BS 5519 : Part 4
BS ISO 8439
BS EN ISO 8733
BS EN ISO 3506-1
BS EN ISO 3506-2
BS EN ISO 3506-3
BS 1133 : Subsection 7.1
BS 1133 : Subsection 7.2
BS 1133 : Subsection 7.3
BS 1133 : Subsection 7.4
BS 1133 : Subsection 7.5
BS 1133 : Subsection 7.6
BS 1133 : Subsection 7.7
binders with metal mechanisms
BS EN ISO 10511 Prevailing torque type
hexagon thin nuts (with non-metallic
insert)
BS EN ISO 10512 Prevailing torque type
hexagon nuts (with non-metallic insert),
style 1, with metric fine pitch thread Property classes 6, 8 and 10
Ribbons and spools used on office
machines and data processing equipment -Characteristics of cores for paper or plastic
printing ribbons
Forms design. Basic layout
BS EN ISO 8733 Parallel pins with internal
thread, of unhardened steel or austenitic
stainless steel
BS EN ISO 3506-1 Mechanical properties
of corrosion-resistant stainless steel
fasteners - Part 1 : Bolts, screws and studs
BS EN ISO 3506-2 Mechanical properties
of corrosion-resistant stainless steel
fasteners - Part 2 : Nuts
BS EN ISO 3506-3 Mechanical properties
of corrosion-resistant stainless-steel
fasteners - Part 3 : Set screws and similar
fasteners not under tensile stress
Packaging code -- Paper and board
wrappers, bags and containers -- Wrapping
papers
Packaging code -- Paper and board
wrappers, bags and containers -- Bags and
envelopes
Packaging code -- Paper and board
wrappers, bags and containers -- Cartons
and boxes
Packaging code -- Paper and board
wrappers, bags and containers -Fibreboard drums
Packaging code -- Paper and board
wrappers, bags and containers -Fibreboard cases and fitments
Packaging code -- Paper and board
wrappers, bags and containers -- Moulded
pulp packaging
Packaging code -- Paper and board
wrappers, bags and containers --
BS 1133 : Section 12
BS 1133 : Section 13
BS 1133 : Section 14
BS 1133 : Section 15
BS 1133 : Section 16
BS 1133 : Section 19
BS 1133 : Section 21
BS 1133 : Section 22
BS 1679 : Part 1
BS 1683
BS 2540
BS 2548
BS 2837
BS 2982
BS 3130 : Part 2
BS 3130 : Part 5
BS 3177
BS 3313 : Part 1
BS 3313 : Part 2
Composite containers
Packaging code -- Methods of protection
against shock (excluding cushioning
devices)
Packaging code -- Twines and cords for
packaging
Packaging code -- Adhesive closing and
sealing tapes
Packaging code -- Tensional strapping
Packaging code -- Adhesives for packaging
Packaging code -- Use of desiccants in
packaging
Packaging code -- Regenerated cellulose
film, films made of plastics, aluminium
foil, flexible multilayer structures and
metallized materials
Packaging code -- Packaging in plastics
containers
Containers for pharmaceutical dispensing -Paperboard containers for strip and blister
packs
Specification for coated aluminium foil for
wrapping processed cheese
Specification for granular desiccant silica
gel
Specification for wood wool for general
packaging purposes
Specification for steel links and strap
assemblies for lifting attachments for
packing cases
Specification for materials and packaging
of surgical scalpels with detachable blades
Glossary of packaging terms -- Paper and
board packaging
Glossary of packaging terms -- Plastics and
flexible packaging (excluding paper)
Method for determining the permeability to
water vapour of flexible sheet materials
used for packaging
Specification for aluminium capping foil
and strip for dairy product containers -Aluminium capping foil for glass
containers
Specification for aluminium capping foil
and strip for dairy product containers -Aluminium capping foil for skirted
BS 3755
BS 3887
BS 4566
BS 4781
BS 4853
BS 5609
BS 6455
BS 7116
BS 7236
BS 7539
BS 1903
BS 3666
BS 3728
BS 6150
BS 3870 : Part 1
BS 3870 : Part 2
BS 4973:Part 1
BS EN ISO 1234
BS EN ISO 2338
BS EN ISO 7042
closures for plastics containers
Methods of test for the assessment of odour
from packaging materials used for
foodstuffs
Specification for pressure sensitive
adhesive closing and sealing tapes
Specification for slots for packages for
pegboard display
Specification for pressure-sensitive
adhesive plastics labels for permanent use
Specification for tensional steel strapping
Specification for printed pressure-sensitive,
adhesive-coated labels for marine use,
including requirements for label base
material
Method for monitoring the levels of
residual solvents in flexible packaging
materials
Specification for double sided pressure
sensitive adhesive tapes
Code of practice for non-reclosable
packaging for solid dose units of medicinal
products
Methods for test for determination of
properties of cushioning materials for
package design purposes
Glossary of terms used by the clothing
industry
Specification for size designation of
women's wear
Specification for size designation of
children's and infants' wear
Code of practice for painting of buildings
Stitches and seams -- Classification and
terminology of stitch types
Stitches and seams -- Classification and
terminology of seam types
Interlinings -- Nonwoven sew-in
interlinings
BS EN ISO 1234 Split pins
BS EN ISO 2338 Parallel pins of
unhardened steel and austenitic stainless
steel
BS EN ISO 7042 Prevailing torque type
all-metal hexagon nuts - Property classes 5,
8, 10 and 12
BS 4973:Part 2
BS 4973:Part 3
BS 4973:Part 4
BS 7079 : Part B2
BS 7079 : Part B3
BS 7079 : Part B4
BS 7079 : Part D1
BS 7079 : Part D2
BS 7079 : Part D3
BS 5426
BS 5511
DD 207
BS 5592
BS 6185
BS EN ISO 10513
BS EN ISO 4762
BS EN ISO 7380
Interlinings -- Nonwoven fusible
interlinings
Interlinings -- Woven and knitted fusible
interlinings
Interlinings -- Specification for woven sewin interlinings
Preparation of steel substrates before
application of paints and related products -Method for determination of chlorides on
cleaned surfaces
Preparation of steel substrates before
application of paints and related products -Assessment of dust on steel surfaces
prepared for painting (pressure-sensitive
tape method)
Preparation of steel substrates before
application of paints and related products -Guide to the estimation of the probability
of condensation on a surface to be painted
Preparation of steel substrates before
application of paints and related products -General principles
Preparation of steel substrates before
application of paints and related products -Abrasive blast-cleaning
Preparation of steel substrates before
application of paints and related products -Hand- and power-tool cleaning
Specification for workwear and career wear
Size designation of clothes - definitions
and body measurement procedure
Method of test for soluble iron corrosion
products to assess surface cleanliness of
steel substrates before application of paints
and related products
Size designation of clothes - headwear
Specification for size designation of men's
wear
BS EN ISO 10513 Prevailing torque type
all-metal hexagon nut, style 2, with metric
fine pitch thread - Property classes 8, 10
and 12
BS EN ISO 4762 Hexagon socket head cap
screws
BS EN ISO 7380 Hexagon socket button
head screws
BS EN ISO 10642
BS EN ISO 7040
BS 6476
BS 6793
BS 1070
BS 1284
BS 2523
BS 3279
BS 3280
BS 3698
BS 3722
BS 3900 : Part 0
BS EN ISO 7719
BS 3900 : Part A11
BS EN ISO 2320
BS EN ISO 1666
DD ENV 12447
BS EN ISO 8740
BS 3900 : Part A7
BS 3900 : Part A8
BS 3900 : Part A9
BS 3900 : Part B1
BS EN ISO 10642 Hexagon socket
countersunk head screws
BS EN ISO 7040 Prevailing torque type
hexagon nuts (with non-metallic insert),
style 1 - Property classes 5, 8 and 10
Guide to garment quality and relevant
British Standards
Specification for men's uniform shirts
Specification for black paint (tar-based)
Specification for bleached lac
Specification for lead-based priming paints
Specification for seedlac
Specification for hand-made shellac
Specification for calcium plumbate priming
paints
Specification for machine-made shellac
Methods of test for paints -- General
introduction
BS EN ISO 7719 Prevailing torque type
all-metal hexagon nuts, style 1 - Property
classes 5, 8 and 10
Tests on liquid paints (excluding chemical
tests) -- Small scale test for combustibility
BS EN ISO 2320 Prevailing torque type
steel hexagon nuts - Mechanical and
performance requirements
BS EN ISO 1666 Starch - Determination of
moisture content - Oven-drying method
DD ENV 12447 Geotextiles and geotextilerelated products - Screening test method for
determining the resistance to hydrolysis
BS EN ISO 8740 Grooved pins - Fulllength parallel grooved, with chamfer
Tests on liquid paints (excluding chemical
tests) -- Determination of the viscosity of
paint at a high rate of shear
Tests on liquid paints (excluding chemical
tests) -- Test for flash/no flash (closed cup
equilibrium method)
Tests on liquid paints (excluding chemical
tests) -- Determination of flashpoint (closed
cup equilibrium method)
Tests involving chemical examination of
liquid paints and dried paint films -Determination of water by the Dean and
Stark method
BS 3900 : Part B10
BS 3900 : Part B11
BS 3900 : Part B12
BS 3900 : Part B15
BS 3900 : Part B16
BS 3900 : Part B2
BS 3900 : Part B3
BS 3900 : Part B4
BS 3900 : Part B5
BS 3900 : Part B6
BS 3900 : Part B7
BS 3900 : Part B8
Tests involving chemical examination of
liquid paints and dried paint films -Determination of hexavalent chromium
content of solid matter
Tests involving chemical examination of
liquid paints and dried paint films -Determination of total chromium content of
liquid matter
Tests involving chemical examination of
liquid paints and dried paint films -Determination of 'soluble' mercury content
Tests involving chemical examination of
liquid paints and dried paint films -- Rapid
method for estimation of lead in liquid
paints
Tests involving chemical examination of
liquid paints and dried paint films -Determination of total mercury
Tests involving chemical examination of
liquid paints and dried paint films -Determination of volatile matter and nonvolatile matter
Tests involving chemical examination of
liquid paints and dried paint films -Determination of 'soluble' lead in the solid
matter in liquid paints : method for use in
conjunction with The Control of Lead at
Work Regulations, 1980 (S.I. 1980 No.
1248)
Tests involving chemical examination of
liquid paints and dried paint films -Determination of total lead in paints and
similar materials
Tests involving chemical examination of
liquid paints and dried paint films -Preparation of acid extracts from liquid
paints or coating powders
Tests involving chemical examination of
liquid paints and dried paint films -Determination of 'soluble' lead content
Tests involving chemical examination of
liquid paints and dried paint films -Determination of 'soluble' antimony
content
Tests involving chemical examination of
liquid paints and dried paint films --
BS 3900 : Part B9
BS 3900 : Part C1
BS 3900 : Part C5
BS 3900 : Part C6
BS 3900 : Part C9
BS 3900 : Part D1
BS 3900 : Part D10
BS 3900 : Part D4
BS 3900 : Part D5
BS 3900 : Part D6
BS 3900 : Part D7
BS 3900 : Part D8
BS 3900 : Part D9
BS 3900 : Part E12
BS 3900 : Part E2
BS 3900 : Part E3
BS 3900 : Part E7
Determination of 'soluble' barium content
Tests involving chemical examination of
liquid paints and dried paint films -Determination of 'soluble' cadmium content
Tests associated with paint film formation - Wet edge time
Tests associated with paint film formation - Determination of film thickness
Tests associated with paint film formation - Determination of fineness of grind
Tests associated with paint film formation - Methods for evaluation of the
compatibility of a product with a surface to
be painted
Optical tests on paint films -- Visual
comparison of the colour of paints
Optical tests on paint films -Determination of colour and colour
difference : calculation
Optical tests on paint films -- Comparison
of contrast ratio (hiding power) of paints of
the same type and colour
Optical tests on paint films -- Measurement
of specular gloss of non-metallic paint
films at 20ø, 60ø and 85ø
Optical tests on paint films -Determination of contrast ratio (opacity) of
light-coloured paints at a fixed spreading
rate, using polyester film
Optical tests on paint films -Determination of hiding power of white
and light-coloured paints by the KubelkaMunk method
Optical tests on paint films -Determination of colour and colour
difference : principles
Optical tests on paint films -Determination of colour and colour
difference : measurement
Mechanical tests on paint films -Indentation test (spherical or pyramidal)
Mechanical tests on paint films-- Scratch
test
Mechanical tests on paint films -- Impact
(falling weight) resistance
Mechanical tests on paint films --
BS 4301
BS 7231 : Part 1
BS 4779
BS 7231 : Part 2
BS 3900 : Part E8
BS 3900 : Part E9
BS 4995
BS 3900 : Part F10
BS 3900 : Part F11
BS 5109
BS 3900 : Part F14
BS 3900 : Part F15
BS 3900 : Part F2
BS 7269 : Part 1
BS 3900 : Part F3
BS 7011 : Part 0
Resistance to impact (falling ball test)
Recommendations for preparation of
drawings for optical elements and systems
Body measurements of boys and girls from
birth up to 16.9 years -- Information in the
form of tables
Recommendations for measurement of the
optical transfer function of optical devices
Body measurements of boys and girls from
birth up to 16.9 years -- Recommendations
of body dimensions for children
Mechanical tests on paint films -Resistance to impact (pendulum test)
Mechanical tests on paint films -- Buchholz
indentation test
Recommendations for measurement of the
veiling glare index of lenses and optical
systems
Durability tests on paint films -Determination of resistance to cathodic
disbonding of coatings for use in marine
environments
Durability tests on paint films -Determination of resistance to cathodic
disbonding of coatings for use on landbased buried structures
Glossary of terms used in assessing the
performance of optical devices and systems
Durability tests on paint films -Determination of resistance to artificial
weathering by exposure to filtered xenonarc radiation
Durability tests on paint films -Determination of resistance to humidity
(intermittent condensation)
Durability tests on paint films -Determination of resistance to humidity
(cyclic condensation)
Drycleanability of leather garments -Specification for drycleanability and for
appropriate care labels
Durability tests on paint films --Resistance
to artificial weathering (enclosed carbon
arc)
Consumable accessories for light
microscopes -- General introduction
BS 7011 : Part 1 : Section 1.1
BS 7011 : Part 2 : Section 2.1
BS 3900 : Part F4
BS 7269 : Part 2
BS 7011 : Part 2 : Section 2.2
BS 3900 : Part F5
BS EN ISO 8739
BS 7011 : Part 3 : Section 3.1
BS 3900 : Part F6
BS 7011 : Part 3 : Section 3.2
BS 3900 : Part F8
BS 7563
BS 3900 : Part G6
BS 3900 : Part G7
BS 3900 : Part H1
Consumable accessories for light
microscopes -- Immersion oils -Specification for immersion oils for general
use
Consumable accessories for light
microscopes -- Slides -- Specification for
dimensions and optical properties
Durability tests on paint films -- Resistance
to continuous salt spray
Drycleanability of leather garments -Method for assessing drycleanability
Consumable accessories for light
microscopes -- Slides -- Specification for
materials and quality of finish
Durability tests on paint films -Determination of light fastness of paints for
interior use exposed to artificial light
sources
BS EN ISO 8739 Grooved pins - Fulllength parallel grooved, with pilot
Consumable accessories for light
microscopes -- Cover glasses -Specification for dimensions and optical
properties
Durability tests on paint films -- Notes for
guidance on the conduct of natural
weathering test
Consumable accessories for light
microscopes -- Cover glasses -Specification for materials and quality of
finish
Durability tests on paint films -Determination of resistance to humid
atmospheres containing sulfur dioxide
Method for determination of compression
values and stiffness of non-prescriptive
graduated support hosiery
Environmental tests on paint films
(including tests for resistance to corrosion
and chemicals) -- Assessment of resistance
to fungal growth
Environmental tests on paint films
(including tests for resistance to corrosion
and chemicals) -- Determination of the
effect of heat
Evaluation of paint and varnish defects --
BS 3900 : Part H4
BS 7012 : Part 0
BS 7754
BS 7012 : Part 1
BS 7012 : Part 4
BS 3900 : Part H5
BS 7012 : Part 5
BS 3900 : Part J1
BS 3900 : Part J2
BS 3900 : Part J3
BS 7012 : Part 6
BS 3900 : Part J4
BS 3900 : Part J6
BS EN ISO 8735
BS 3900 : Part J7
BS 3900 : Part J8
Designation of intensity, quantity and size
of common types of defect : general
principles and rating schemes
Evaluation of paint and varnish defects -Designation of degree of cracking
Light microscopes -- General introduction
Code of practice for garment evaluation by
wearer trials
Light microscopes -- Specification for the
magnifying power of microscope imaging
components
Light microscopes -- Specification for
microscope objective and nosepiece screw
threads
Evaluation of paint and varnish defects -Designation of degree of flaking
Light microscopes -- Specification for
connecting dimensions of tube slides and
tube slots
Testing of coating powders -- Sampling of
coating powders
Testing of coating powders -Determination of particle size distribution
of coating powders by sieving
Testing of coating powders -Determination of the gelation time of
coating powders
Light microscopes -- Specification for
spectral filters
Testing of coating powders -Determination of the storage stability of
coating powders
Testing of coating powders -Determination of density of coating
powders by gas comparison pyknometer
(referee method)
BS EN ISO 8735 Parallel pins with internal
thread, of hardened steel or martensitic
stainless steel
Testing of coating powders -Determination of density of coating
powders by liquid displacement
pyknometer
Testing of coating powders -- Calculation
of lower explosion limit of coating
powders
BS 7017
BS 3900 : Part J9
BS ISO 9022-1
BS 3084
BS 4310
BS 4479 : Part 4
BS 3866
BS 4162
BS 4652
BS 4726
BS 4756
BS 4764
BS 5131:Part 5: Section 5.11
BS 5044
BS 5082
BS 7271
BS 5358
BS 7557
BS 4981
BS 7664
BS 7719
BS 7779
Specification for reference wavelengths for
optics and optical instruments
Testing of coating powders -Determination of flow properties of a
coating powder/air mixture
Optics and optical instruments.
Environmental test methods -- Definitions,
extent of testing
Specification for slide fasteners
Specification for permissible limit of lead
in low-lead paints and similar materials
Design of articls that are to be coated -Recommendations for paint coatings and
varnish coatings
Specification for holes and shanks for
buttons
Methods of test for buttons
Specification for zinc-rich priming paint
(organic media)
Methods for sampling raw materials for
paints and varnishes
Specification for ready mixed aluminium
priming paints for woodwork
Specification for powder cement paints
Methods of test for footwear and footwear
materials -- Testing of complete footwear -Determination of the strength of buckle
fastening assemblies
Specification for contrast aid paints used in
magnetic particle flaw detection
Specification for water-borne priming
paints for woodwork
Specification for touch and close fasteners
Specification for solvent-borne priming
paints for woodwork
Specification for limits of metal release
from painted surfaces of articles, liable to
come into contact with foodstuffs
Specification for Mondopoint footwear
sizing and marking system
Specification for undercoat and finishing
paints
Specification for water-borne emulsion
paints for interior use
Specification for semi-transparent priming
stains (stain basecoats) for joinery
BS 5131:Part 0
BS 5131:Part 1: Section 1.1
BS 5131:Part 1: Section 1.2
BS 5131:Part 1: Section 1.3
BS 5131:Part 1: Section 1.4
BS 5131:Part 1: Section 1.6
BS 5131:Part 1: Section 1.7
BS AU 148 : Part 10
BS 5131:Part 1: Section 1.8
BS AU 148 : Part 12
BS 5131:Part 1: Section 1.9
BS AU 148 : Part 13
BS 5131:Part 2: Section 2.1
BS 5131:Part 2: Section 2.10
BS 5131:Part 2: Section 2.11
Methods of test for footwear and footwear
materials -- General introduction
Methods of test for footwear and footwear
materials -- Adhesives -- Resistance of
adhesive joints to heat (creep test)
Methods of test for footwear and footwear
materials -- Adhesives -- Resistance of
adhesive joints to peeling
Methods of test for footwear and footwear
materials -- Adhesives -- Preparation of test
assemblies using adhesives (other than hot
melt adhesives) for heat resistance (creep)
and peel tests
Methods of test for footwear and footwear
materials -- Adhesives -- Heat activation
life of adhesives
Methods of test for footwear and footwear
materials -- Adhesives -- Recommended
environmental storage conditions for
adhesive joints prior to heat resistance or
peeling tests
Methods of test for footwear and footwear
materials -- Adhesives -- Preparation of test
assemblies using hot melt adhesives for
heat resistance (creep) and peel tests
Methods of test for motor vehicle paints -Resistance to heat and corrosion
Methods of test for footwear and footwear
materials -- Adhesives -- Rate of bond
strength development in shear of hot melt
adhesives for lasting
Methods of test for motor vehicle paints -Resistance to accelerated weathering
Methods of test for footwear and footwear
materials -- Adhesives -- Measurement of
green strength of adhesive joints
Methods of test for motor vehicle paints -Resistance to deterioration by contact with
other materials
Methods of test for footwear and footwear
materials -- Solings -- Ross flexing method
for cut growth resistance of soling
Heat shrinkage of cellular solings
Methods of test for footwear and footwear
materials -- Solings -- Resistance of solings
to short-term contact with a hot surface
BS 5131:Part 2: Section 2.6
BS 5131:Part 2: Section 2.7
BS 5131:Part 3: Section 3.1
BS 5131:Part 3: Section 3.4
BS 5131:Part 3: Section 3.5
BS 5131:Part 3: Section 3.6
BS EN ISO 8734
BS 5131:Part 3: Section 3.7
BS 5131:Part 4: Section 4.1
BS 5131:Part 4: Section 4.12
BS 5131:Part 4: Section 4.13
BS 5131:Part 4: Section 4.18
BS 5131:Part 4: Section 4.2
BS 5131:Part 4: Section 4.20
Methods of test for footwear and footwear
materials -- Solings -- Split tear strength of
cellular solings
Methods of test for footwear and footwear
materials -- Solings -- The preparation of
test pieces from soling materials for
physical testing
Methods of test for footwear and footwear
materials -- Uppers, textiles and threads -Strength of upper materials and lining
materials at right angles to stitch
perforations
Methods of test for footwear and footwear
materials -- Uppers, textiles and threads -Edgewise compressibility, upper materials
Methods of test for footwear and footwear
materials -- Uppers, textiles and threads -The break/pipiness test
Methods of test for footwear and footwear
materials -- Uppers, textiles and threads -Abrasion resistance of shoe laces
BS EN ISO 8734 Parallel pins, of hardened
steel or martensitic stainless steel (Dowel
pins)
Methods of test for footwear and footwear
materials -- Uppers, textiles and threads -Breaking strength of shoe laces
Methods of test for footwear and footwear
materials -- Other components -Resistance to peeling of insole board
Methods of test for footwear and footwear
materials -- Other components -- Fastness
of fibreboard finishes to rubbing in the
presence of water and perspiration
Methods of test for footwear and footwear
materials -- Other components -Transverse tensile strength of fibreboard
Methods of test for footwear and footwear
materials -- Other components -Longitudinal stiffness of steel shanks
Methods of test for footwear and footwear
materials -- Other components -- Flexing
index of fibreboard
Methods of test for footwear and footwear
materials -- Other components -- Force
required to pull heel pins out of shoe heels
BS 5131:Part 4: Section 4.3
BS 5131:Part 4: Section 4.4
BS 5131:Part 4: Section 4.5
BS 5131:Part 4: Section 4.6
BS 5131:Part 4: Section 4.7
BS 5131:Part 4: Section 4.8
BS 5131:Part 5: Section 5.1
BS 5131:Part 5: Section 5.13
BS 5131:Part 5: Section 5.2
BS 5131:Part 5: Section 5.3
BS 5131:Part 5: Section 5.4
BS 5833
BS AU 148 : Part 15
BS EN 60669-2-2
BS 5131:Part 5: Section 5.5
Methods of test for footwear and footwear
materials -- Other components -Resistance of fibre board to stitch-tear
Methods of test for footwear and footwear
materials -- Other components -- Heel pin
holding strength of fibreboard
Methods of test for footwear and footwear
materials -- Other components -- Tensile
strength of fibreboard
Methods of test for footwear and footwear
materials -- Other components -- Shear
strength of ribs stuck to insoles
Methods of test for footwear and footwear
materials -- Other components -Resistance to peeling of ribs stuck to
insoles
Methods of test for footwear and footwear
materials -- Other components -Resistance of heels of ladies' shoes to
lateral impact
Methods of test for footwear and footwear
materials -- Testing of complete footwear -Adhesion of stuck-on and moulded-on
soles
Methods of test for footwear and footwear
materials -- Testing of complete footwear -Measurement of the strength of stitched
seams in upper and lining materials
Methods of test for footwear and footwear
materials -- Testing of complete footwear -Degree of vulcanization of moulded-on
rubber soles
Methods of test for footwear and footwear
materials -- Testing of complete footwear -Resistance of complete footwear to heat
Methods of test for footwear and footwear
materials -- Testing of complete footwear -Sole bond peeling strength
Scheme for labelling of footwear
Methods of test for motor vehicle paints -Resistance to chipping
BS EN 60669-2-2 Switches for household
and similar fixed electrical installations Part 2 : Particular requirements - Section 2
: Remote-control switches (RCS)
Methods of test for footwear and footwear
BS 5131:Part 5: Section 5.6
BS 5131:Part 5: Section 5.7
BS 5131:Part 5: Section 5.9
BS 5131:Part 6: Section 6.1
BS 5131:Part 6: Section 6.2
BS AU 148 : Part 2
BS AU 148 : Part 3
BS AU 148 : Part 4
BS AU 148 : Part 6
BS AU 148 : Part 9
BS 5943
BS 6159 : Part 1
BS 7141: Part 6
BS 6131
BS EN 60669-2-2
materials -- Testing of complete footwear -Resistance of finished footwear to water
penetration (trough test)
Methods of test for footwear and footwear
materials -- Testing of complete footwear -Impact test for rigid units and shoe bottoms
Methods of test for footwear and footwear
materials -- Testing of complete footwear -Fatigue test for rigid units and shoe
bottoms
Methods of test for footwear and footwear
materials -- Testing of complete footwear -Strength of top piece attachment to shoe
heels
Methods of test for footwear and footwear
materials -- Codes of practice -- Code of
practice for the comparative evaluation by
wear triaI of materials, components or
constructions
Methods of test for footwear and footwear
materials -- Codes of practice -- Code of
practice for the identification in footwear
wear trials of msjor weaknesses in design
or construction and the assessment of
fitness-for-purpose
Methods of test for motor vehicle paints -Resistance to continuous salt spray
Methods of test for motor vehicle paints -Flexibility and adhesion
Methods of test for motor vehicle paints -Resistance to abrasion
Methods of test for motor vehicle paints -Hardness
Methods of test for motor vehicle paints
Methods for measurement and recording
for orthopaedic footwear
Polyvinyl chloride boots -- Specification
for general and industrial lined or unlined
boots
Narrow fabrics -- Specification for laces for
footwear and other purposes
Glossary of terms relating to household
sewing machines
BS EN 60669-2-2 Switches for household
and similar fixed electrical installations Part 2 : Particular requirements - Section 2
BS EN 60204-3-1
BS EN ISO 1519
BS EN ISO 1520
BS EN 60335-2-28
BS EN 456
BS EN 605
BS 1781
BS 1877 : Part 10
BS 1877 : Part 8
BS 2005
BS 4578
BS EN 23270
BS 5334
BS 5335 : Part 1
BS EN 24624
BS 5335 : Part 2
BS 5340
BS 217
BS 5815 : Part 1
: Remote-control switches (RCS)
Safety of machinery. Electrical equipment
of machines -- Particular requirements -Sewing machines, units and systems
Paints and varnishes. Bend test (cylindrical
mandrel)
Paints and varnishes. Cupping test
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Sewing machines
Method for determination of flashpoint of
paints, varnishes and related products by
the rapid equilibrium method
Paints and varnishes. Standard panels for
testing
Specification for linen and linen union
textiles
Domestic bedding -- Specification for
mattresses for children's cots,
perambulators and similar domestic articles
Domestic bedding -- Pillows and bolsters
for domestic use (excluding cellular rubber
pillows and bolsters)
Glossary of terms for fillings for bedding,
upholstery and other domestic articles
Specification for methods of test for
hardness of, and for air flow through,
infants' pillows
Specification for temperatures and
humidities for conditioning and testing
paints, varnishes and their raw materials
Method of test. Filling power index of
down and feathers
Continental quilts -- Specification for quilts
containing fillings other than feather and/or
down
Paints and varnishes. Pull-off test
Continental quilts -- Specification for quilts
filled with feather and/or down
Specification. Flexible polyurethane foam
pillows for domestic use
Specification for red lead for paints and
jointing compounds
Sheets, sheeting, pillowslips, towels,
napkins, counterpanes and continental quilt
secondary covers suitable for use in the
BS 5815 : Part 2
BS 5815 : Part 3
BS 5866 : Part 1
BS 5866 : Part 2
BS 5866 : Part 3
BS 5866 : Part 4
BS 5867 : Part 1
BS 5867 : Part 2
BS 282, 389
BS 7068
BS 7175
BS 7311 : Part 1
BS 7311 : Part 2
BS EN 14
BS 283
BS 303
BS 318
public sector -- Specification for sheeting,
sheets and pillowslips
Sheets, sheeting, pillowslips, towels,
napkins, counterpanes and continental quilt
secondary covers suitable for use in the
public sector -- Specification for towels and
napkins
Sheets, sheeting, pillowslips, towels,
napkins, counterpanes and continental quilt
secondary covers suitable for use in the
public sector -- Specification for
counterpanes and continental quilt
secondary covers including flammability
performance
Blankets suitable for use in the public
sector -- Specification for wool and
wool/polyamide blankets
Blankets suitable for use in the public
sector -- Specification for cotton leno
cellular blankets
Blankets suitable for use in the public
sector -- Specification for synthetic fibre
cellular blankets
Blankets suitable for use in the public
sector -- Specification for flammability
performance
Specification for fabrics for curtains and
drapes -- General requirements
Specification for fabrics for curtains and
drapes -- Flammability requirements
Specifications for lead chromes and zinc
chromes for paints
Specification for alternating pressure air
mattresses
Methods of test for the ignitability of
bedcovers and pillows by smouldering and
flaming ignition sources
Cabinet towels -- Specification
Cabinet towels -- Specification for
processing
Dimensions of bed blankets
Specification for iron blue pigments
Specification for lead chrome green
pigments for paints
Specification for chrome oxide green
pigments for paints
BS 388
BS 1795
BS 1851
BS 3483 : Part 0
BS 3483 : Part A1
BS 3483 : Part A5
BS 3483 : Part A7
BS 3483 : Part B3
BS 3483 : Part C5
BS 3483 : Part C6
BS 3483 : Part C7
BS 3483 : Part C8
BS 3981
BS 4313
BS 5193
BS 7446
BS EN 61242
BS ISO 7176-14
BS 5381-4
Specification for aluminium pigments
Specification for extenders for paints
Specification for titanium dioxide pigments
for paints
Methods for testing pigments for paints
General introduction
Methods for testing pigments for paints
Comparison of colour
Methods for testing pigments for paints
Comparison of lightening power of white
pigments
Methods for testing pigments for paints
Colorimetric method for the comparison of
the colours, in full-shade system, of white,
black and coloured pigments
Methods for testing pigments for paints
Determination of residue on sieve (water
method, using a manual procedure)
Methods for testing pigments for paints
Determination of resistivity of aqueous
extract
Methods for testing pigments for paints
Determination of water-soluble sulphates,
chlorides and nitrates
Methods for testing pigments for paints
Comparison of resistance to bleeding
Methods for testing pigments for paints
Comparison of heat stability
Specification. Iron oxide pigments for
paints
Specification for strontium chromate
pigments for paints
Specification for zinc phosphate pigments
for paints
Specification for lead chromate pigments
and lead chromate-molybdate pigments for
paints
BS EN 61242 Electrical accessories - Cable
reels for household and similar purposes
BS ISO 7176-14 Wheelchairs - Part 14 :
Power and control systems for electric
wheelchairs - Requirements and test
methods
BS 5381-4 Methods for determination of
physical properties of tobacco and tobacco
products - Part 4 : Determination of air
BS EN ISO 787-18
BS EN ISO 787-19
BS 391
BS 4725
BS 6782 : Part 1
BS ISO 4659
BS 4289-10
BS ISO 12775
BS IEC 60300-3-6
BS 6782 : Part 6
BS 245
BS 3761
BS AU 50 : Part 4 : Subsection 3.1a
BS EN 50094
BS EN ISO 11758
permeability of materials used as cigarette
papers, filter plug wrap and filter joining
paper
General methods of test for pigments and
extenders -- Determination of residue on
sieve. Mechanical flushing procedure
General methods of test for pigments and
extenders -- Determination of water-soluble
nitrates (Salicylic acid method)
Specification for tung oil for paints and
varnishes
Specification for linseed stand oil for paints
and varnishes
Binders for paints -- Method for
determination of volatile and non-volatile
content
BS ISO 4659 Rubber, styrene-butadiene
(carbon or carbon black and oil
masterbatches) - Evaluation procedure
BS 4289-10 Methods for analysis of
oilseeds - Part 10 : Determination of
chlorophyll content of rapeseed
BS ISO 12775 Guidelines on types of glass
of normal bulk-production composition and
their test methods
BS IEC 60300-3-6 Dependability
management - Part 3 : Application guide Section 6 : Software aspects of
dependability
Binders for paints -- Method for
determination of softening point (ring and
ball method)
Specification for mineral solvents (white
spirit and related hydrocarbon solvents) for
paints and other purposes
Specification for solvent-based paint
remover
BS AU 50 : Part 4 : Subsection 3.1a Tyres
and wheels - Part 4 : Rim profiles and
dimensions - Section 3 : Off-the-road rims
- Subsection 3.1a - Specification for narrow
and wide base off-the-road vehicle rims
BS EN 50094 Access control system for
the MAC/packet family : EUROCRYPT
BS EN ISO 11758 Rubber and plastics
hoses - Exposure to a xenon arc lamp -
BS ISO 9022-10
BS ISO 9022-11
BS ISO 9022-12
BS ISO 9022-13
BS ISO 9022-14
BS 332
BS ISO 9022-15
BS ISO 9022-16
BS ISO 9022-17
BS ISO 9022-18
BS ISO 9022-19
BS ISO 9022-2
BS ISO 9022-3
BS ISO 9022-4
BS 3110
Determination of changes in colour and
appearance
Optics and optical instruments.
Environmental test methods -- Combined
sinusoidal vibration, dry heat or cold
Optics and optical instruments.
Environmental test methods -- Mould
growth
Optics and optical instruments.
Environmental test methods -Contamination
Optics and optical instruments.
Environmental test methods -- Combines
shock, bump or free-fall, dry heat or cold
Optics and optical instruments.
Environmental test methods -- Dew,
hoarfrost, ice
Specification for liquid driers for oil paints
Optics and optical instruments.
Environmental test methods -- Combined
random vibration wide band :
reproducibility, medium, in dry heat or
cold
Optics and optical instruments.
Environmental test methods -- Combined
bounce or steady-state acceleration, in dry
heat or cold
Optics and optical instruments.
Environmental test methods -- Combined
contamination, solar radiation
Optics and optical instruments.
Environmental test methods -- Combined
damp heat and low internal pressure
Optics and optical instruments.
Environmental test methods -- Temperature
cycles combined with sinusoidal or random
vibration
Optics and optical instruments.
Environmental test methods -- Cold, heat,
humidity
Optics and optical instruments.
Environmental test methods -- Mechanical
stress
Optics and optical instruments.
Environmental test methods -- Salt mist
Methods for measuring the rub resistance
BS ISO 9022-5
BS ISO 9022-6
BS ISO 9022-7
BS ISO 9022-8
BS 3484 : Part 2
BS ISO 9022-9
BS 4069
BS 4321
BS 6096 : Part 1
BS ISO 9039
BS 7442-3.1
BS EN ISO 2398
BS EN ISO 3861
BS ISO 11628
BS 2808
BS 2992
BS 3136 : Part 2
of print
Optics and optical instruments.
Environmental test methods -- Combined
cold, low air pressure
Optics and optical instruments.
Environmental test methods -- Dust
Optics and optical instruments.
Environmental test methods -- Drip, rain
Optics and optical instruments.
Environmental test methods -- High
pressure, low pressure, immersion
Record inks Specification for permanent
inks
Optics and optical instruments.
Environmental test methods -- Solar
radiation
Specification for magnetic flaw detection
inks and powders
Methods of test for printing inks (resistance
of prints to various physical and chemical
agents)
Marking inks and solder resist coating
materials for printed circuits -- Methods of
test
Optics and optical instruments. Quality
evaluation of optical systems.
Determination of distortion
BS 7442-3.1 Rubber or plastics covered
rollers - Part 3 : Method of test - Section
3.1 : Determination of apparent hardness
(IRHD method)
BS EN ISO 2398 Rubber hose, textilereinforced, for compressed air Specification
BS EN ISO 3861 Rubber hoses for sand
and grit blasting - Specification
Graphic technology. Prints and printing
inks. Determination of resistance of prints
to acids
Specification for artists' water-colour
brushes for local authorities
Specification for painters' and decorators'
brushes for local authorities and public
institutions (excluding quality of fillings)
Specification for cold emulsion spraying
machines for roads -- Metric units
BS ISO 9211-1
BS ISO 9211-2
BS EN 28028
BS EN 50059
BS 6742 : Part 1
BS 6742 : Part 2
BS 6742 : Part 3
BS 6742 : Part 4
BS ISO 9211-3
BS 3936 : Part 1
BS 3936 : Part 10
BS 3936 : Part 11
BS 3936 : Part 2
BS 3936 : Part 3
BS 3936 : Part 4
Optics and optical instruments. Optical
coatings. -- Definitions
Optics and optical instruments. Optical
coatings. -- Optical properties
Rubber and/or plastics hose assemblies for
airless paint spraying. Specification
Specification for electrostatic hand-held
spraying equipment for non-flammable
material for painting and finishing
Electrostatic painting and finishing
equipment using flammable materials -Electrostatic painting and finishing
equipment using flammable materials.
Specification for hand-held spray guns and
associated apparatus
Electrostatic painting and finishing
equipment using flammable materials -Specification for selection, installation and
use of hand-held paint spray guns (energy
limit of 0,24 mJ) and associated apparatus
Electrostatic painting and finishing
equipment using flammable materials -Electrostatic painting and finishing
equipment using flammable materials.
Specification for selection, installation and
use of hand-held powder spray guns
(energy limit of 5 mJ) a
Electrostatic painting and finishing
equipment using flammable materials -Electrostatic painting and finishing
equipment using flammable materials.
Specification for selection, installation and
use of hand-held flock spray guns (energy
limit of 0,24 mJ
Optics and optical instruments. Optical
coatings. -- Environmental durability
Nursery stock -- Specification for trees and
shrubs
Nursery stock -- Specification for ground
cover plants
Nursery stock -- Specification for
container-grown culinary herbs
Nursery stock -- Specification for roses
Nursery stock -- Specification for fruit
plants
Nursery stock -- Specification for forest
BS 3936 : Part 5
BS 3936 : Part 7
BS 3936 : Part 9
BS 3969
BS ISO 9334
BS 6100 : Part 1 : Section 1.0
BS 5578 : Part 2
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.1
BS 6750
BS 6954 : Part 1
BS 6954 : Part 3
BS ISO 9336-1
BS 7307 : Part 2
BS ISO 9336-2
BS EN ISO 6224
BS 7308
trees
Nursery stock -- Specification for poplars
and willows
Nursery stock -- Specification for bedding
plants
Nursery stock -- Specification for bulbs,
corms and tubers
Recommendations for turf for general
purposes
Optics and optical instruments. Optical
transfer function. Definitions and
mathematical relationships
Glossary of building and civil engineering
terms -- General and miscellaneous -General
Building construction - stairs -- Modular
co-ordination : specification for coordinating dimensions for stairs and stair
openings
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Coordination of dimensions; tolerances
and accuracy
Specification for modular coordination in
building
Tolerances for building -Recommendations for basic principles for
evaluation and specification
Tolerances for building -Recommendations for selecting target size
and predicting fit
Optics and optical instruments.
Application. Optical transfer function. -Interchangeable lenses for 35 mm still
cameras
Building tolerances. Measurement of
buildings and building products -- Position
of measuring points
Optics and optical instruments.
Application. Optical transfer function. -Lenses for office copiers
BS EN ISO 6224 Plastics hoses, textilereinforced, for general-purpose water
applications - Specification
Method for presentation of dimensional
BS ISO 9336-3
PD 6446
BS 3998
BS ISO 9358
DD ENV 1993-1-1
BS 4043
BS ISO 10109-1
BS 4428
BS ISO 10109-6
BS ISO 10109-8
BS 5837
DD ENV 1992-1-1
BS 7370: Part 2
BS 7370: Part 3
DD ENV 1994-1-1
BS EN ISO 6803
accuracy data in building constructions
Optics and optical instruments.
Application. Optical transfer function. -Telescopes
Recommendations for the co-ordination of
dimensions in building. Combinations of
sizes
Recommendations for tree work
Optics and optical instruments. Veiling
glare of image forming systems.
Definitions and methods of measurement
Eurocode 3. Design of steel structures -General rules and rules for buildings
(together with United Kingdom National
Application Document)
Recommendations for transplanting rootbailed trees
Optics and optical instruments.
Environmental requirements -- General
information, definitions, climatic zones and
their parameters
Code of practice for general landscape
operations (excluding hard surfaces)
Optics and optical instruments.
Environmental requirements -- Test
requirements for medical optical devices
Optics and optical instruments.
Environmental requirements -- Test
requirements for extreme conditions of use
Guide for trees in relation to construction
Eurocode 2 : Design of concrete structures
-- General rules for buildings (together
with United Kingdom National Application
Document)
Grounds maintenance -- Recommendations
for the maintenance of hard areas
(excluding sports surfaces)
Grounds maintenance -- Recommendations
for maintenance of amenity and functional
turf (other than sports turf)
Eurocode 4 : design of composite steel and
concrete structures -- General rules and
rules for buildings (together with United
Kingdom National Application Document)
BS EN ISO 6803 Rubber or plastics hoses
and hose assemblies - Hydraulic-pressure
BS EN 60118-13
BS 7643 : Part 1
BS 7643 : Part 2
BS 7643 : Part 3
BS 5837
BS EN 60118-13
BS 6100 : Part 1 : Section 1.8
BS 1384 : Part 2
BS 6911 : Part 4
BS 6736
BS 4167 : Part 10
BS 5502 : Part 0
BS 4167 : Part 5
BS 5502 : Part 11
BS 5502 : Part 20
BS 6914 : Part 10
BS 5502 : Part 22
BS ISO 5-4
impulse test without flexing
BS EN 60118-13 Hearing aids - Part 13 :
Electromagnetic compatibility (EMC) Product standard
Building construction. Expression of users'
requirements -- Thermal requirements
Building construction. Expression of users'
requirements -- Air purity requirements
Building construction. Expression of users'
requirements -- Acoustical requirements
Guide for trees in relation to construction
BS EN 60118-13 Hearing aids - Part 13 :
Electromagnetic compatibility (EMC) Product standard
Glossary of building and civil engineering
terms -- General and miscellaneous -Environment and physical planning
Photographic density measurements -Specification for geometric conditions for
transmission density
BS 6911 : Part 4 Testing earth-moving
machinery - Part 4 : Engine test code - Net
power
Code of practice for hand signalling for use
in agricultural operations
Specification for electrically-heated
catering equipment -- Sterilizing sinks
Buildings and structures for agriculture -Introduction
Specification for electrically-heated
catering equipment -- Steaming ovens
Buildings and structures for agriculture -Guide to regulations and sources of
information
Buildings and structures for agriculture -Code of practice for general design
considerations
BS 6914 : Part 10 Terminology (including
definitions of dimensions and symbols) for
earth-moving machinery - Part 10 :
Terminology and commercial
specifications for loaders
Buildings and structures for agriculture -Code of practice for design, construction
and loading
Photography. Density measurements --
BS 5502 : Part 30
BS 5502 : Part 31
BS 6914 : Part 10
BS 6911 : Part 12
BS 5502 : Part 32
BS 5502 : Part 40
BS 5502 : Part 41
BS 5502 : Part 43
BS 5502 : Part 49
BS 5588 : Part 4
BS ISO 4895
BS EN ISO 7231
BS 5502 : Part 50
BS 5502 : Part 51
BS 5502 : Part 52
Geometric conditions for reflection density
Buildings and structures for agriculture -Code of practice for control of infestation
Buildings and structures for agriculture -Guide to the storage and handling of waste
BS 6914 : Part 10 Terminology (including
definitions of dimensions and symbols) for
earth-moving machinery - Part 10 :
Terminology and commercial
specifications for loaders
BS 6911 : Part 12 Testing earth-moving
machinery Part 12 : Determination of
turning dimensions of wheeled machines
Buildings and structures for agriculture -Guide to noise attenuation
Buildings and structures for agriculture -Code of practice for design and
construction of cattle buildings
Buildings and structures for agriculture -Code of practice for design and
construction of sheep buildings and pens
Buildings and structures for agriculture -Code of practice for design and
construction of poultry buildings
Buildings and structures for agriculture -Code of practice for design and
construction of milking premises
Fire precautions in the design, construction
and use of buildings -- Code of practice for
smoke control in protected escape routes
using pressurization
BS ISO 4895 Plastics - Liquid epoxy resins
- Determination of tendency to crystallize
BS EN ISO 7231 Polymeric materials,
cellular flexible - Method of assessment of
air flow value at constant pressure-drop
Buildings and structures for agriculture -Code of practice for design, construction
and use of storage tanks and reception pits
for livestock slurry
Buildings and structures for agriculture -Code of practice for design and
construction of slatted, perforated and mesh
floors for livestock
Buildings and structures for agriculture -Code of practice for design of alarm
BS 5502 : Part 60
BS 5502 : Part 65
BS 5502 : Part 66
BS 5502 : Part 70
BS 5810
BS 6019
BS EN ISO 8307
BS 6100 : Part 1 : Section 1.1
BS 6100 : Part 1 : Section 1.2
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.3
BS 6100 : Part 1 : Section 1.7 : Subsection
1.7.1
BS 6270 : Part 1
BS 6270 : Part 2
BS 6270 : Part 3
systems and emergency ventilation for
livestock housing
Buildings and structures for agriculture -Code of practice for design and
construction of buildings for mushrooms
Buildings and structures for agriculture -Code of practice for design and
construction of crop processing buildings
Buildings and structures for agriculture -Code of practice for design and
construction of chitting houses
Buildings and structures for agriculture -Code of practice for design and
construction of ventilated on floor stores
for combinable crops
Code of practice for access for the disabled
to buildings
Recommendations for performance
standards in building: contents and
presentation
BS EN ISO 8307 Flexible cellular
polymeric materials - Determination of
resilience
Glossary of building and civil engineering
terms -- General and miscellaneous -Types of building
Glossary of building and civil engineering
terms -- General and miscellaneous -Spaces
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Setting out and measurement
Glossary of building and civil engineering
terms -- General and miscellaneous -Characteristics and performance -Performance
Code of practice for cleaning and surface
repair of buildings -- Natural stone, cast
stone and clay and calcium silicate brick
masonry
Code of practice for cleaning and surface
repair of buildings -- Concrete and precast
concrete masonry
Code of practice for cleaning and surface
repair of buildings -- Metals (cleaning
BS 6100 : Part 1 : Section 1.7 : Subsection
1.7.2
BS 6472
BS 6611
BS 6661
BS 6953
BS 6954 : Part 1
BS 6954 : Part 3
BS 7307 : Part 2
BS 7334: Part 7
BS 7334: Part 8
BS 7543
BS 7641
BS 7643 : Part 1
BS 7643 : Part 3
only)
Glossary of building and civil engineering
terms -- General and miscellaneous -Characteristics and performance -Characteristics
Guide to evaluation of human exposure to
vibration in buildings (1 Hz to 80 Hz)
Guide to evaluation of the response of
occupants of fixed structures, especially
buildings and offshore structures, to lowfrequency horizontal motion (0.063 Hz to 1
Hz)
Guide for design, construction and
maintenance of single-skin air supported
structures
Glossary of terms for procedures for setting
out, measurement and surveying in
building construction (including guidance
notes)
Tolerances for building -Recommendations for basic principles for
evaluation and specification
Tolerances for building -Recommendations for selecting target size
and predicting fit
Building tolerances. Measurement of
buildings and building products -- Position
of measuring points
Measuring instruments for building
construction -- Methods for determining
accuracy in use of instruments when used
for setting out
Measuring instruments for building
construction -- Methods for determining
accuracy in use of electronic distancemeasuring instruments up to 150 m
Guide to durability of buildings and
building elements, products and
components
Performance standards in building.
Definition and calculation of area and
space indicators
Building construction. Expression of users'
requirements -- Thermal requirements
Building construction. Expression of users'
requirements -- Acoustical requirements
BS 8207
BS 807
BS 8210
BS 5502 : Part 82
CP 3 : Chapter V : Part 2
BS 5502 : Part 81
BS 5502 : Part 80
BS 5502 : Part 75
BS 5502 : Part 74
BS 5588 : Part 6
BS EN ISO 10066
BS 5502 : Part 72
BS 5588 : Part 2
BS 5588 : Part 3
BS 5588 : Part 10
BS A 322
Code of practice for energy efficiency in
buildings
Specification for spot welding electrodes
Guide to building maintenance
management
Buildings and structures for agriculture -Code of practice for design of amenity
buildings
Code of basic data for the design of
buildings -- Loading -- Wind loads
Buildings and structures for agriculture -Code of practice for design and
construction of chemical stores
Buildings and structures for agriculture -Code of practice for design and
construction of workshops, maintenance
and inspection facilities
Buildings and structures for agriculture -Code of practice for the design and
construction of forage stores
Buildings and structures for agriculture -Code of practice for design and
construction of bins and silos for
combinable crops
Fire precautions in the design, construction
and use of buildings -- Code of practice for
places of assembly
BS EN ISO 10066 Flexible cellular
polymeric materials - Determination of
creep in compression
Buildings and structures for agriculture -Code of practice for design and
construction of controlled environment
stores for vegetables, fruit and flowers
Fire precautions in the design, construction
and use of buildings -- Code of practice for
shops
Fire precautions in the design, construction
and use of buildings -- Code of practice for
office buildings
Fire precautions in the design, construction
and use of buildings -- Code of practice for
shopping complexes
BS A 322 Aerospace - Screws, pan head,
internal offset cruciform ribbed or unribbed
drive, threaded to head, metallic material,
BS 5588 : Part 1
BS 3445 : Part 1
BS 3445 : Part 2
BS 5619
BS 4008
BS 5190
BS EN ISO 3386-1
BS 6762 : Part 2
BS 6767 : Part 1
BS 7348
BS 5226
BS 8103 : Part 1
BS 8103 : Part 2
BS 5305
coated or uncoated, strength classes less
than or equal to 1 100 MPa - Dimensions
Fire precautions in the design, construction
and use of buildings -- Code of practice for
residential buildings
Agricultural water troughs and water
fittings -- Specification for water trough
bodies, service boxes and water supply
system
Agricultural water troughs and water
fittings -- Code of practice for installation
and operation
Code of practice for design of housing for
the convenience of disabled people
Specification for cattle grids
Specification for pipeline filters, filter
bodies and filter elements for milking
installations
BS EN ISO 3386-1 Polymeric materials,
cellular flexible - Determination of stressstrain characteristic in compression - Part 1
: Low-density materials
Services for leisure accommodation
vehicles and transportable accommodation
units -- Code of practice for the installation
of solid fuel fired heating in park homes
and transportable accommodation units
Transportable accomodation units -Recommendations for design and
construction
Specification for electrical apparatus for
the detection of combustible gases in
domestic premises
Code of practice for equipment and
procedures for the cleaning and
disinfecting of milking machine
installations
Structural design of low-rise buildings -Code of practice for stability, site
investigation, foundations and ground floor
slabs for housing
Structural design of low-rise buildings -Code of practice for masonry walls for
housing
Code of practice for cleaning and
disinfecting of plant and equipment used in
BS 8103 : Part 4
BS 8211 : Part 1
BS ISO TR 9464
BS 5977 : Part 1
BS 5977 : Part 2
BS 6093
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.0
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.1
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.2
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.3
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.4
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.5
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.6
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.7
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.8
BS 7543
the dairying industry
Structural design of low-rise buildings -Code of practice for suspended concrete
floors for housing
Energy efficiency in housing -- Code of
practice for energy efficient refurbishment
of housing
BS ISO TR 9464 Guide to the use of ISO
5167-1:1991
Lintels -- Method for assessment of load
Lintels -- Specification for prefabricated
lintels
Code of practice for design of joints and
jointing in building construction
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- External works
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Walls and
cladding
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Roofs and roofing
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Floors and ceilings
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Stairs and
circulation elements
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Doors, windows
and openings
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Jointing products,
builders' hardware and accessories
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Finishes
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Signs and signing
Guide to durability of buildings and
BS 8297
BS 8298
BS 493
BS 1243
BS 4315 : Part 2
BS 5545 : Part 1
BS 5234:Part 2
BS 5247 : Part 14
BS EN 60437
BS EN 61314-1
BS ISO 7720
BS 5385 : Part 1
BS 5385 : Part 2
BS EN 50087
BS 5385 : Part 4
BS 5385 : Part 3
building elements, products and
components
Code of practice for design and installation
of non-loadbearing precast concrete
cladding
Code of practice for design and installation
of natural stone cladding and lining
Specification for airbricks and gratings for
wall ventilation
Specification for metal ties for cavity wall
construction
Methods of test for resistance to air and
water penetration -- Permeable walling
constructions (water penetration)
Milking machine installations -- Glossary
of terms
Partitions (including matching linings) -Specification for performance requirements
for strength and robustness including
methods of test
Code of practice for sheet roof and wall
coverings -- Corrugated asbestos-cement
BS EN 60437 Radio interference test on
high-voltage insulators
BS EN 61314-1 Harmonized system of
quality assessment for electronic
components - Fibre optic fan-outs - Part 1 :
Generic specification
BS ISO 7720 Prevailing torque type allmetal hexagon nuts, style 2 - Property class
9
Wall and floor tiling -- Code of practice for
the design and installation of internal
ceramic and natural stone wall tiling and
mosaics in normal conditions
Wall and floor tiling -- Code of practice for
the design and installation of external
ceramic wall tiling and mosaics (including
terra cotta and faience tiles)
Safety of household and similar electrical
appliances. Particular requirements for
bulk-milk coolers
Wall and floor tiling -- Code of practice for
tiling and mosaics in specific conditions
Wall and floor tiling -- Code of practice for
the design and installation of ceramic floor
BS 5385 : Part 5
BS 5642 : Part 2
BS 6178 : Part 1
BS 6915
BS 8103 : Part 2
BS 8208 : Part 1
BS ISO 7041
BS 8212
CP 143 : Part 12
CP 143 : Part 1
CP 143 : Part 10
CP 143 : Part 15
CP 143 : Part 16
CP 143 : Part 5
DD 140 : Part 1
DD 140 : Part 2
BS 460
tiles and mosaics
Wall and floor tiling -- Code of practice for
the design and installation of terrace tile
and slab,natural stone and composition
block floorings
Sills and copings -- Specification for
copings of precast concrete, cast stone,
clayware, slate and natural stone
Joist hangers -- Specification for joist
hangers for building into masonry walls of
domestic dwellings
Specification for design and construction of
fully supported lead sheet roof and wall
coverings
Structural design of low-rise buildings -Code of practice for masonry walls for
housing
Guide to assessment of suitability of
external cavity walls for filling with
thermal insulants -- Existing traditional
cavity construction
BS ISO 7041 Prevailing torque type
hexagon nuts (with non-metallic insert),
style 2 - Property classes 9 and 12
Code of practice for dry lining and
partitioning using gypsum plasterboard
Code of practice for sheet roof and wall
coverings -- Copper. Metric units
Code of practice for sheet roof and wall
coverings -- Aluminium, corrugated and
troughed
Code of practice for sheet roof and wall
coverings -- Galvanized corrugated steel.
Metric units
Code of practice for sheet roof and wall
coverings -- Aluminium. Metric units
Code of practice for sheet roof and wall
coverings -- Semi-rigid asbestos bitumen
sheet. Metric units
Code of practice for sheet roof and wall
coverings -- Zinc
Wall ties -- Methods of test for mortar joint
and timber frame connections
Wall ties -- Recommendations for design
of wall ties
Specification for cast iron rainwater goods
BS 569
BS 747
BS 1091
BS 1494 : Part 1
BS 2782 : Part 11 : Method 1110
BS 2997
BS 4576: Part 1
BS 5268 : Part 3
BS 5268 : Part 7 : Section 7.2
BS 6367
CP 144 : Part 4
BS EN 490
BS ISO 10484
BS EN 516
BS 585 : Part 1
BS 585 : Part 2
BS 3187
BS EN ISO 105-Z04
BS EN ISO 105-Z07
Specification for asbestos-cement rainwater
goods
Specification for roofing felts
Specification for pressed steel gutters,
rainwater pipes, fittings and accessories
Specification for fixing accessories for
building purposes -- Fixings for sheet, roof
and wall coverings
Methods of testing plastics -Thermoplastics pipes, fittings and valves -Tensile properties of dumb-bell specimens
from PVC gutter profiles of pipes for nonpressure applications
Specification for aluminium rainwater
goods
Unplasticized polyvinyl chloride (PVC-U)
rainwater goods and accessories Half-round
gutters and pipes of circular cross-section
Structural use of timber -- Code of practice
for trussed rafter roofs
Structural use of timber -Recommendations for the calculation basis
for span tables -- Joists for flat roofs
Code of practice for drainage of roofs and
paved areas
Roof coverings -- Mastic asphalt. Metric
units
Concrete roofing tiles and fittings. Product
specifications
BS ISO 10484 Widening test on nuts
Prefabricated accessories for roofing.
Installations for roof access. Walkways,
treads and steps
Wood stairs -- Specification for stairs with
closed risers for domestic use, including
straight and winder flights and quarter or
half landings
Wood stairs -- Specification for
performance requirements for domestic
stairs constructed of wood-based materials
Specification for electrically conducting
rubber flooring
BS EN ISO 105-Z04 Textiles - Tests for
colour fastness - Part Z04 : Dispersiblity of
disperse dyes (ISO 105-Z04:1995)
BS EN ISO 105-Z07 Textiles - Tests for
BS 4592 : Part 1
BS 4592 : Part 2
BS 4592 : Part 4
BS 4592 : Part 5
BS 5268 : Part 7 : Section 7.1
BS EN ISO 105-Z08
BS 5268 : Part 7 : Section 7.4
BS 5268 : Part 7 : Section 7.7
BS 5395 : Part 1
BS 5395 : Part 2
BS 5395 : Part 3
BS 5578 : Part 2
BS 5588 : Part 5
colour fastness - Part Z07 : Determination
of application solubility and solution
stability of water-soluble dyes (ISO 105Z07 : 1995)
Industrial type flooring, walkways and stair
treads -- Specification for open bar gratings
Industrial type flooring, walkways and stair
treads -- Specification for expanded metal
grating panels
Industrial type flooring, walkways and stair
treads -- Specification for glass reinforced
plastics open bar gratings
Industrial type flooring, walkways and stair
treads -- Specification for solid plates in
steel, aluminium and glass reinforced
plastics
Structural use of timber -Recommendations for the calculation basis
for span tables -- Domestic floor joists
BS EN ISO 105-Z08 Textiles - Tests for
colour fastness Part Z08 : Determination of
solubility and solution stability of reactive
dyes in the presence of electrolytes (ISO
105-Z08 : 1995)
Structural use of timber -Recommendations for the calculation basis
for span tables -- Ceiling binders
Structural use of timber -Recommendations for the calculation basis
for span tables -- Purlins supporting
sheeting or decking
Stairs, ladders and walkways -- Code of
practice for the design of straight stairs
Stairs, ladders and walkways -- Code of
practice for the design of helical and spiral
stairs
Stairs, ladders and walkways -- Code of
practice for the design of industrial type
stairs, permanent ladders and walkways
Building construction - stairs -- Modular
co-ordination : specification for coordinating dimensions for stairs and stair
openings
Fire precautions in the design, construction
and use of buildings -- Code of practice for
firefighting stairs and lifts
BS 6263 : Part 2
BS 8103 : Part 4
BS 8201
BS 8290 : Part 1
BS 8290 : Part 2
BS 8290 : Part 3
BS 8204 : Part 1
BS 8204 : Part 2
BS 8204 : Part 3
BS 8204 : Part 4
BS 8204 : Part 5
DD 171
BS 567
BS EN 61011-1
BS EN 61011-2
BS 751
BS 1181
Care and maintenance of floor surfaces -Code of practice for resilient sheet and tile
flooring
Structural design of low-rise buildings -Code of practice for suspended concrete
floors for housing
Code of practice for flooring of timber,
timber products and wood based panel
products
Suspended ceilings -- Code of practice for
design
Suspended ceilings -- Specification for
performance of components and assemblies
Suspended ceilings -- Code of practice for
installation and maintenance
Screeds, bases and in-situ floorings -- Code
of practice for concrete bases and screeds
to receive in-situ floorings
Screeds, bases and in-situ floorings -- Code
of practice for concrete wearing surfaces
Screeds, bases and in-situ floorings -- Code
of practice for polymer modified
cementitious wearing surfaces
Screeds, bases and in-situ floorings -- Code
of practice for terrazzo wearing surfaces
Screeds, bases and in-situ floorings -- Code
of practice for mastic asphalt underlays and
wearing surfaces
Guide to specifying performance
requirements for hinged or pivoted doors
(including test methods)
Specification for asbestos-cement flue
pipes and fittings, light quality
Electric fence energizers safety
requirements -- Electric fence energizers.
Safety requirements for battery-operated
electric fence energizers suitable for
connection to the supply mains
Electric fence energizers safety
requirements -- Electric fence energizers.
Safety requirements for battery-operated
electric fence energizers not for connection
to the supply mains
Specification for steel baseplates for flat
bottom railway rails
Specification for clay flue linings and flue
BS 3986
BS EN ISO 105-Z09
BS 1289 : Part 2
BS 2741
BS 4211
BS 2742
BS 5061
BS EN 60601-2-33
BS EN 861
BS 3572
BS 3678
BS 4076
BS 4207
BS 4543: Part 1
BS 4543: Part 2
BS 4543: Part 3
terminals
Methods of test for drying performance of
agricultural grain dryers
BS EN ISO 105-Z09 Textiles - Tests for
colour fastness Part Z09 : Determination of
cold water solubility of water-soluble dyes
(ISO 105-Z09 : 1995)
Flue blocks and masonry terminals for gas
appliances -- Specification for clay flue
blocks and terminals
Recommendations for the construction of
simple smoke viewers
Specification for ladders for permanent
access to chimneys, other high structures,
silos and bins
Notes on the use of the Ringelmann and
miniature smoke charts
Specification for cylindrical forage tower
silos and recommendations for their use
BS EN 60601-2-33 Medical electrical
equipment - Part 2 : Particular
requirements for safety - Section 2.33 :
Specification for magnetic resonance
equipment for medical diagnosis
BS EN 861 Safety of woodworking
machines - Surface planing and
thicknessing machines
Specification for access fittings for
chimneys and other high structures in
concrete or brick work
Specification for access hooks for
chimneys and other high structures in steel
Specification for steel chimneys
Code of practice for the installation of
monolithic linings for steel chimneys and
flues
Factory-made insulated chimneys -Methods of test
Factory-made insulated chimneys -Specification for chimneys with stainless
steel flue linings for use with solid fuel
fixed appliances
Factory-made insulated chimneys -Specification for chimneys with stainless
steel fluelining for use with oil fired
appliances
BS 7435 : Part 2
BS 7566 : Part 2
BS 7566 : Part 1
BS 5440 : Part 2
BS 6999
BS EN 61300-3-34
BS EN 61300-3-39
BS EN ISO 14130
BS 2468 : Part 1
BS 7566 : Part 3
BS 2468 : Part 3
BS 7566 : Part 4
Fibre cement flue pipes, fittings and
terminals -- Specification for heavy quality
fibre cement flue pipes, fittings and
terminals
Installation of factory-made chimneys to
BS 4543 for domestic appliances -Specification for installation design
Installation of factory-made chimneys to
BS 4543 for domestic appliances -- Method
of specifying installation design
information
Installation of flues and ventilation for gas
appliances of rated input not exceeding 60
kW (1st, 2nd and 3rd family gases) -Specification for installation of ventilation
for gas appliances
Specification for vitreous-enamelled lowcarbon-steel flue pipes, other components
and accessories for solid-fuel-burning
appliances with a rated output of 45 kW
BS EN 61300-3-34 Fibre optic
interconnecting devices and passive
components - Basic test and measurement
procedures - Part 3.34 : Examinations and
measurements - Attenuation of random
mated connectors
BS EN 61300-3-39 Fibre optic
interconnecting devices and passive
components - Basic test and measurement
procedures - Part 3.39 : Examinations and
measurements - PC optical connector
reference plug selection
BS EN ISO 14130 Fibre-reinforced plastic
composites - Determination of apparent
interlaminar shear strength by short-beam
method
Glossary of terms and classification
relating to agricultural machinery and
implements -- Power and tractive units
Installation of factory-made chimneys to
BS 4543 for domestic appliances -Specification for site installation
Glossary of terms and classification
relating to agricultural machinery and
implements -- Soil working equipment
Installation of factory-made chimneys to
BS 644 : Part 1
BS 644 : Part 2
BS 1245
BS 3417 : Part 1
BS 4787 : Part 1
BS 5277
BS 5278
BS 5286
BS 3733
BS 5368 : Part 1
BS 4639
BS 5368 : Part 2
BS 5368 : Part 4
BS 5368 : Part 3
BS 5369
BS EN ISO 14129
BS 4742 : Part 2
BS 4742 : Part 4
BS 4543 for domestic appliances -Recommendations for installation design
and installation
Wood windows -- Specification for factory
assembled windows of various types
Wood windows -- Wood double hung sash
windows
Specification for metal door frames (steel)
Power take-off shafts and guards for
tractors and machinery for agriculture and
forestry -- Specification for power take-off
drive shafts
Internal and external wood doorsets, door
leaves and frames -- Specification for
dimensional requirements
Doors. Measurement of defects of general
flatness of door leaves
Doors. Measurement of dimensions and of
defects of squareness of door leaves
Specification for aluminium framed sliding
glass doors
Specification for endless V-belt drives for
agricultural purposes
Methods of testing windows -- Air
permeability test
Specification for brakes and braking
systems for towed agricultural vehicles
Methods of testing windows -Watertightness test under static pressure
Methods of testing windows -- Form of test
report
Methods of testing windows -- Wind
resistance tests
Methods of testing doors; behaviour under
humidity variations of door leaves placed
in successive uniform climates
BS EN ISO 14129 Fibre-reinforced plastic
composites - Determination of the in-plane
shear stress/shear strain response, including
the in-plane shear modulus and strength by
the &plusmin; 45° tension test method
Hydraulic equipment for agricultural
machinery -- Specification for quick-action
hydraulic couplers for general purposes
Hydraulic equipment for agricultural
machinery -- Specification for hydraulic
BS 4742 : Part 5
BS 5642 : Part 1
BS 5389
BS 5713
BS 5401
BS 5631
BS 5731
BS 6055
BS 6142
BS 6384
BS 6508
BS 6509
BS 7403-11
BS 7698-12
BS 7691
couplings on braking systems for trailers
and trailed equipment
Hydraulic equipment for agricultural
machinery -- Specification for dimensions
of braking cylinders for trailers and trailed
equipment
Sills and copings -- Specification for
window sills of precast concrete, cast
stone, clayware, slate and natural stone
Method of test for enclosure pressurization
systems on agricultural tractors and selfpropelled machines
Specification for hermetically sealed flat
double glazing units
Guide to information content and
presentation of operators' manuals provided
for tractors and machinery for agriculture
and forestry
Specification for earth moving machinery
and tractors and machinery for agriculture
and forestry - seat index point
Specification for mountings and apertures
for external equipment controls on
agricultural and forestry tractors
Methods for measurement of whole-body
vibration of the operators of agricultrual
wheeled tractors and machinery
Specification for presentation of technical
data on hydraulic systems of agricultural
tractors and machinery
Methods for determination of braking
performance of agricultural and forestry
vehicles
Recommendations for track widths for
agricultural tractors and machinery
Specification for clearance zone on
implements for the three-point linkage to
agricultural tractors
BS 7403-11 Full-flow lubricating oil filters
for internal combustion engines - Part 11 :
Methods of test for self-cleaning filters
BS 7698-12 Reciprocating internal
combustion engine driven alternating
current generating sets - Part 12 :
Emergency power supply to safety devices
Methods for testing resistance to
BS 7791
BS 6462
BS 7412
BS 7413
BS 7414
BS AU 50 : Part 1 : Section 4 : Subsection
4.1a
BS 7698-12
BS AU 50 : Part 1 : Section 4 : Subsection
4.2a
BS AU 50 : Part 1 : Section 4 : Subsection
4.3a
BS AU 50 : Part 1 : Section 4 : Subsection
4.4a
BS 7722
BS AU 50 : Part 1 : Section 4 : Subsection
4.7
environmental conditions of electronic
equipment used in agriculture and
horticulture
Agricultural tractors. Hydraulic pressure
for implements
Specification for mechanical performance
of peg-type casement stays and face-fixed
wedge-action fasteners
Specification for plastics windows made
from PVC-U extruded hollow profiles
Specification for white PVC-U extruded
hollow profiles with heat welded corner
joints for plastics windows : materials type
A
Specification for white PVC-U extruded
hollow profiles with heat welded corner
joints for plastics windows : materials type
B
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
for designations and dimensions for ply
rating marked series tyres
BS 7698-12 Reciprocating internal
combustion engine driven alternating
current generating sets - Part 12 :
Emergency power supply to safety devices
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
for load ratings for ply rating marked series
tyres
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
for classification codes and nomenclature
for ply rating marked series tyres
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
for ply rating marked series tyres for log
skidders
Specification for surface covered PVC-U
extruded hollow profiles with heat welded
corner joints for plastics windows
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
for marking, dimensions, load ratings and
reference speeds for service description
marked tyres for agricultural tractor drive
BS EN 61440
BS EN 61642
BS EN 2591-303
BS 8213 : Part 1
BS 8213 : Part 4
BS AU 169a
BS 8214
CP 153 : Part 2
CP 153 : Part 3
CP 151 : Part 1
BS 6181
BS 4395 : Part 1
BS 5531
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.2
BS 4395 : Part 2
BS 5649 : Part 7
wheels
BS EN 61440 Secondary cells and batteries
containing alkaline or other non-acid
electrolytes - Sealed nickel-cadmium small
prismatic rechargeable single cells
BS EN 61642 Industrial a.c. networks
affected by harmonics - Application of
filters and shunt capacitors
BS EN 2591-303 Elements of electrical
and optical connection - Test methods Part 303 : Cold/low pressure and damp heat
Code of practice for safety in use and
during cleaning of windows and doors
(including guidance on cleaning materials
and methods)
Code of practice for the installation of
replacement windows and doorsets in
dwellings
Method for determination of burning
behaviour of interior materials for road
vehicles, and tractors and machinery for
agriculture and forestry
Code of practice for fire door assemblies
with non-metallic leaves
Windows and rooflights -- Durability and
maintenance
Windows and rooflights -- Sound
insulation
Doors and windows including frames and
linings -- Wooden doors
Method of test for air permeability of joints
in building
Specification for high strength friction grip
bolts and associated nuts and washers for
structural engineering -- General grade
Code of practice for safety in erecting
structural frames
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Jointing
Specification for high strength friction grip
bolts and associated nuts and washers for
structural engineering -- Higher grade bolts
and nuts and general grade washers
Lighting columns -- Method for
BS 1841 : Part 1
BS 5977 : Part 1
BS 5977 : Part 2
CP 3 : Chapter V : Part 2
BS 3417 : Part 3
BS EN 2591-321
BS 4220 : Part 1
PD 6529
BS 4742 : Part 8
BS 4742 : Part 3
BS 4742 : Part 6
BS 4742 : Part 7
BS 5453
BS 5510
BS 5861
verification of structural design by
calculation
Rear-mounted, three-point linkage on
agricultural wheeled tractors -Specification for categories 1,2 and 3
Lintels -- Method for assessment of load
Lintels -- Specification for prefabricated
lintels
Code of basic data for the design of
buildings -- Loading -- Wind loads
Power take-off shafts and guards for
tractors and machinery for agriculture and
forestry -- Supplementary requirements to
Part 1. 'Specification for power take-off
drive shafts' and to Part 2. 'Methods for
testing guards'
BS EN 2591-321 Elements of electrical
and optical connection - Test methods Part 321 : Damp heat, cyclic test
Methods of test for seats on agricultural
wheeled tractors -- Tests on artificial track
Report on a new approach for design loads
for buildings
Hydraulic equipment for agricultural
machinery -- Method for colour coding of
remote hydraulic power services and
controls on agricultural tractors
Hydraulic equipment for agricultural
machinery -- Specification for dimensions
and pressure rating of single-acting
telescopic tipping cylinders for trailers
Hydraulic equipment for agricultural
machinery -- Specification for dimensions
and location of agricultural tractor
hydraulic return to sump potting
Hydraulic equipment for agricultural
machinery -- Specification for port
connections for agricultural trailed vehicle
hydraulic brake couplings
Specification for anchorages for seat belts
in protective cabs and frames on
agricultural tractors
Methods for determination of maximum
speeds of agricultural wheeled tractors
Specification for rear-mounted power takeoffs on agricultural tractors
BS 449 : Part 2
BS 5891
BS 3678
BS 5947
BS 4604 : Part 1
BS EN 2591-320
BS EN 2591-319
BS 4604 : Part 2
BS 6108 : Part 1
BS EN 2591-316
BS 1915
BS 5493
BS 6139
BS 5950 : Part 8
BS 4120
BS 5950 : Part 1
BS 6347 : Part 2
BS 5950 : Part 2
Specification for the use of structural steel
in building -- Metric units
Specification for ring-type hitches on
agricultural trailers and towed implements
Specification for access hooks for
chimneys and other high structures in steel
Method of test for static loading of
protective cabs and frames for agricultural
wheeled tractors, including acceptance
conditions
Specification for the use of high strength
friction grip bolts in structural steelwork.
Metric series -- General grade
BS EN 2591-320 Elements of electrical
and optical connection - Test methods Part 320 : Simulated solar radiation at
ground level
BS EN 2591-319 Elements of electrical
and optical connection - Test methods Part 319 : Gastightness of solderless
wrapped connections
Specification for the use of high strength
friction grip bolts in structural steelwork.
Metric series -- Higher grade (parallel
shank)
Couplings on agricultural towing vehicles - Specification for hook type
BS EN 2591-316 Elements of electrical
and optical connection - Test methods Part 316 : Ozone resistance
Specification for still projectors
Code of practice for protective coating of
iron and steel structures against corrosion
Specification for drawbars and towing
hooks on agricultural tractors
Structural use of steelwork in building -Code of practice for fire resistant design
Methods for the measurement of
performance of still projectors
Structural use of steelwork in building -Code of practice for design in simple and
continuous construction: hot rolled sections
Performance assessment of agricultural
tractors -- Methods for determination of
hydraulic power and lifting capacity
Structural use of steelwork in building --
BS 6347 : Part 3
BS 5950 : Part 3 : Section 3.1
BS 5950 : Part 4
BS 6347 : Part 6
BS 5950 : Part 5
BS 6347 : Part 7
BS 5950 : Part 6
BS 6347 : Part 8
BS 5950 : Part 7
BS 4533: Part 101
BS 4533: Part 102: Section 102.1
BS 6389
BS EN 2591-314
BS 4533: Part 102: Section 102.10
BS 4533: Part 102: Section 102.17
Specification for materials, fabrication and
erection: hot-rolled sections
Performance assessment of agricultural
tractors -- Method for determination of
turning and clearance diameters
Structural use of steelwork in building -Design in composite construction -- Code
of practice for design of simple and
continuous composite beams
Structural use of steelwork in building -Code of practice for design of composite
slabs with profiled steel sheeting
Performance assessment of agricultural
tractors -- Method for determination of
centre of gravity
Structural use of steelwork in building -Code of practice for design of cold formed
sections
Performance assessment of agricultural
tractors -- Method for determination of axle
power
Structural use of steelwork in building -Code of practice for design of light gauge
profiled steel sheeting
Performance assessment of agricultural
tractors -- Method of testing engine air
cleaners
Structural use of steelwork in building -Specification for materials and
workmanship: cold formed sections
Luminaires -- Specification for general
requirements and tests
Luminaires -- Particular requirements -Specification for fixed general purpose
luminaires
Methods for determination of operator's
field of vision for agricultural tractors
BS EN 2591-314 Elements of electrical
and optical connection - Test methods Part 314 : Immersion at low air pressure
Luminaires -- Particular requirements -Specification for portable child-appealing
luminaires
Luminaires -- Particular requirements -Specification for luminaires for stage
lighting, television, film and photographic
BS 7608
BS 4533: Part 102: Section 102.19
BS EN 2591-313
BS 8100 : Part 2
BS 8100 : Part 4
BS 6792
BS 4533: Part 102: Section 102.22
BS 4533: Part 102: Section 102.4
BS EN 2591-312
BS EN 2591-309
BS 4533: Part 102: Section 102.5
BS 4533: Part 102: Section 102.51
BS 4533: Part 102: Section 102.55
BS 6818 : Part 1
BS 4533: Part 102: Section 102.8
BS 4533: Part 102: Section 102.9
DD 133
studios (outside and indoor)
Code of practice for fatigue design and
assessment of steel structures
Luminaires -- Particular requirements -Specification for air-handling luminaires
(safety requirements)
BS EN 2591-313 Elements of electrical
and optical connection - Test methods Part 313 : Artificial rain
Lattice towers and masts -- Guide to the
background and use of Part 1 'Code of
practice for loading'
Lattice towers and masts -- Code of
practice for loading of guyed masts
Specification for agricultural trailer and
trailed machinery drawbar jacks
Luminaires -- Particular requirements -Specification for luminaires for emergency
lighting
Luminaires -- Particular requirements -Specification for portable general purpose
luminaires
BS EN 2591-312 Elements of electrical
and optical connection - Test methods Part 312 : Air leakage
BS EN 2591-309 Elements of electrical
and optical connection - Test methods Part 309 : Dry heat
Luminaires -- Particular requirements -Specification for floodlights
Luminaires -- Particular requirements -Specification for luminaires with type of
protection N
Luminaires -- Particular requirements -Specification for luminaires for hospitals
and health care buildings
Front-mounted linkage and power take-off
for agricultural wheeled tractors -Specification for power take-off
Luminaires -- Particular requirements -Specification for handlamps
Luminaires -- Particular requirements -Specification for photo and film luminaires
(non-professional)
Code of practice for strength assessment of
members of lattice towers and masts
BS EN 2591-305
BS EN 2591-304
BS 4533: Part 103: Section 103.2
DD ENV 1993-1-1
BS 4793
BS EN 10210-1
BS 6818 : Part 2
BS 5268 : Part 3
BS ISO 1230
BS 5268 : Part 4 : Section 4.1
BS 5268 : Part 4 : Section 4.2
BS 5268 : Part 7 : Section 7.1
BS 5268 : Part 7 : Section 7.2
BS EN 2591-302
BS EN 2591-216
BS EN 2591-305 Elements of electrical
and optical connection - Test methods Part 305 : Rapid change of temperature
BS EN 2591-304 Elements of electrical
and optical connection - Test methods Part 304 : Damp heat steady state
Luminaires -- Performance requirements -Specification for photometric
characteristics of luminaires for hospitals
and health care buildings
Eurocode 3. Design of steel structures -General rules and rules for buildings
(together with United Kingdom National
Application Document)
Recommendations for specifying the
optical performance of lenses for television
cameras
Hot finished structural hollow sections of
non-alloy and fine grain structural steels -Technical delivery requirements
Front-mounted linkage and power take-off
for agricultural wheeled tractors -Specification for front linkage
Structural use of timber -- Code of practice
for trussed rafter roofs
Photography. Determination of flash guide
numbers
Structural use of timber -- Fire resistance of
timber structures -- Recommendations for
calculating fire resistance of timber
members
Structural use of timber -- Fire resistance of
timber structures -- Recommendations for
calculating fire resistance of timber stud
walls and joisted floor constructions
Structural use of timber -Recommendations for the calculation basis
for span tables -- Domestic floor joists
Structural use of timber -Recommendations for the calculation basis
for span tables -- Joists for flat roofs
BS EN 2591-302 Elements of electrical
and optical connection - Test methods Part 302 : Climatic sequence
BS EN 2591-216 Elements of electrical
and optical connection - Test methods -
BS 5268 : Part 7 : Section 7.3
BS AU 3
BS 5268 : Part 7 : Section 7.4
BS 5268 : Part 7 : Section 7.5
BS 5268 : Part 7 : Section 7.6
BS ISO 2827
BS 5268 : Part 7 : Section 7.7
BS ISO 8581
BS ISO 9336-1
BS 6446
BS EN 2591-213
BS EN 2591-311
BS ISO 9336-2
BS EN 380
BS ISO 9336-3
Part 216 : Engagement depth of contacts
Structural use of timber -Recommendations for the calculation basis
for span tables -- Ceiling joists
Specification for clearance dimensions and
fifth wheel positions for tractors and semitrailers
Structural use of timber -Recommendations for the calculation basis
for span tables -- Ceiling binders
Structural use of timber -Recommendations for the calculation basis
for span tables -- Domestic rafters
Structural use of timber -Recommendations for the calculation basis
for span tables -- Purlins supporting rafters
Photography. Electronic flash equipment.
Determination of light output and
performance
Structural use of timber -Recommendations for the calculation basis
for span tables -- Purlins supporting
sheeting or decking
Photography. Electronic flash equipment.
Connectors to synchro-cord
Optics and optical instruments.
Application. Optical transfer function. -Interchangeable lenses for 35 mm still
cameras
Specification for manufacture of glued
structural components of timber and wood
based panel products
BS EN 2591-213 Elements of electrical
and optical connection - Test methods Part 213 : Shielding effectiveness from 100
MHz to 1 GHz
BS EN 2591-311 Elements of electrical
and optical connection - Test methods Part 311 : Low air pressure
Optics and optical instruments.
Application. Optical transfer function. -Lenses for office copiers
Timber structures. Test methods. General
principles for static load testing
Optics and optical instruments.
Application. Optical transfer function. --
BS EN 383
BS EN 408
BS EN 409
BS EN 1152
BS EN 595
BS 5822
BS EN 596
BS 7006
BS EN 60335-2-10
BS EN 60335-2-12
BS EN 60335-2-15
BS EN 60335-2-23
BS EN 60335-2-25
BS 6049-8
BS EN 60335-2-26
Telescopes
Timber structures. Test methods.
Determination of embedding strength and
foundation values for dowel type fasteners
Timber structures. Structural timber and
glued laminated timber. Determination of
some physical and mechanical properties
Timber structures. Test methods.
Determination of the yield moment of
dowel type fasteners. Nails
Tractors and machinery for agriculture and
forestry. Guards for power take-off (PTO)
drive shafts. Wear and strength tests
Timber structures. Test methods. Test of
trusses for the determination of strength
and deformation behaviour
Specification for agricultural discs :
classification, main fixing dimensions and
general requirements
Timber structures. Test methods. Soft body
impact test of timber framed walls
Specification for trailed agricultural rollers
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Floor treatment machines
and wet scrubbing machines
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Warming plates and similar
appliances
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Appliances for heating
liquids
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Appliances for skin or hair
care
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Microwave ovens
BS 6049-8 Methods of test for tea - Part 8 :
Classification of grades by particle size
analysis
Specification for safety of household and
similar electrical appliances -- Particular
BS EN 60335-2-27
BS ISO/IEC 8878
BS EN 60335-2-3
BS EN 28970
BS EN 60335-2-31
BS EN 60335-2-32
BS EN 60335-2-33
BS ISO/IEC 8602
BS 6483 : Part 1
BS 6483 : Part 2
BS EN 26891
BS EN ISO 6507-3
BS EN ISO 6507-2
BS EN ISO 6507-1
requirements -- Clocks
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Ultra-violet and infra-red
radiation skin treatment appliances for
household and similar use
BS ISO/IEC 8878 Information technology Telecommunications and information
exchange between systems - Use of X.25 to
provide the OSI Connection-mode
Network Service
Specification for safety of household and
similar eletrical appliances -- Particular
requirements -- Electric irons
Timber structures. Testing of joints made
with mechanical fasteners. Requirements
for wood density
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Range hoods
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Massage appliances
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Coffee mills and coffee
grinders
BS ISO/IEC 8602 Information technology Protocol for providing the OSI
connectionless-mode transport service
Fertilizer distributors -- Methods of
evaluating performance under laboratory
and field conditions
Fertilizer distributors -- Method of test for
fertilizer distributors in lines
Timber structures. Joints made with
mechanical fasteners. General principles
for the determination of strength and
deformation characteristics
BS EN ISO 6507-3 Metallic materials Vickers hardness test - Part 3 : Calibration
of reference blocks
BS EN ISO 6507-2 Metallic materials Vickers hardness test - Part 2 : Verification
of testing machines
BS EN ISO 6507-1 Metallic materials -
BS 6550
BS EN 60335-2-47
BS EN 690
BS 1243
BS EN 60335-2-45
BS ISO/IEC 10021-6
BS ISO/IEC TR 11802-1
BS ISO 10339
BS EN 60335-2-48
BS EN 60335-2-49
BS EN 60335-2-50
BS EN 60335-2-51
Vickers hardness test - Part 1 : Test method
Recommendation for working widths of
equipment for sowing, planting,
distributing fertilizers and spraying
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Commercial electric
boiling pans
Agricultural machinery. Manure spreaders.
Safety
Specification for metal ties for cavity wall
construction
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Portable electric heating
tools and similar appliances
BS ISO/IEC 10021-6 Information
technology - Message Handling Systems
(MHS) : Protocol specifications
BS ISO/IEC TR 11802-1 Information
technology - Telecommunications and
information exchange between systems Local and metropolitan area networks Technical reports and guidelines - Part 1 :
The structure and coding of Logical Link
Control addresses in L
BS ISO 10339 Ophthalmic optics - Contact
lenses - Determination of water content of
hydrogel lenses
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Commercial electric
grillers and toasters
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Commercial catering
electric hot cupboards
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Commercial electric bainsmarie
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Stationary circulation
pumps for heating and service water
installations
BS EN 60335-2-52
BS EN 60335-2-54
BS EN 60335-2-55
BS EN 60335-2-56
BS EN 60335-2-57
BS 5628 : Part 1
BS EN 60335-2-59
BS 5628 : Part 2
DD 140 : Part 1
DD 140 : Part 2
DD ENV 1992-1-1
BS EN 60335-2-60
BS EN 60335-2-63
BS ISO 10342
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Oral hygiene appliances
connected to the mains supply though a
safety isolating transformer
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- General purpose cleaning
appliances
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Electrical appliances for
use with aquariums and garden ponds
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Projectors and similar
appliances
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Ice-cream appliances with
incorporated motor-compressors
Code of practice for use of masonry -Structural use of unreinforced masonry
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Insect killers
Code of practice for use of masonry -Structural use of reinforced and prestressed
masonry
Wall ties -- Methods of test for mortar joint
and timber frame connections
Wall ties -- Recommendations for design
of wall ties
Eurocode 2 : Design of concrete structures
-- General rules for buildings (together
with United Kingdom National Application
Document)
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Whirlpool baths and
similar equipment
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Commercial electric water
boilers and liquid heaters
BS ISO 10342 Ophthalmic instruments -
BS EN ISO 3098-0
BS EN 60335-2-64
BS EN 60335-2-8
BS EN 60335-2-9
BS 6978 : Part 1
BS 6978 : Part 2
DD ENV 1994-1-1
BS EN 60604
BS 6089
BS 1196
BS 8007
BS 7459 : Part 1
BS 7459 : Part 2
BS 7562 : Part 1
BS 8110 : Part 2
BS EN ISO 3098-5
BS 8110 : Part 3
Eye refractometers
BS EN ISO 3098-0 Technical Product
Documentation - Lettering - Part 0 :
General requirements
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Commercial electric
kitchen machines
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Electric shavers, hair
clippers and similar appliances
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Toasters, grills, roasters
and similar appliances
Seed drills -- Methods of test for single
seed drills
Methods of test for seed drills for rows
Eurocode 4 : design of composite steel and
concrete structures -- General rules and
rules for buildings (together with United
Kingdom National Application Document)
`Topflash/Flipflash' photographic flash
lamp array
Guide to assessment of concrete strength in
existing structures
Specification for clayware field drain pipes
and junctions
Code of practice for design of concrete
structures for retaining aqueous liquids
Rotating sprinklers for irrigation equipment
-- Specification for design and operational
requirements
Rotating sprinklers for irrigation equipment
-- Methods of test for uniformity of
distribution
Planning, design and installation of
irrigation schemes -- Glossary of terms
Structural use of concrete -- Code of
practice for special circumstances
BS EN ISO 3098-5 Technical product
documentation - Lettering - Part 5 : CAD
lettering of the Latin alphabet, numerals
and marks
Structural use of concrete -- Design charts
BS 7562 : Part 2
BS 7562 : Part 3
BS 4485: Part 1
BS EN ISO 3098-5
BS 4485: Part 3
BS 7562 : Part 4
BS EN 2133
BS 7562 : Part 5
BS 7562 : Part 6
BS 7605 : Part 1
BS 7605 : Part 2
BS 4115
BS 1772
BS 6355
BS 6356 : Part 2
BS 6356 : Part 3
BS 1917
for singly reinforced beams, doubly
reinforced beams and rectangular columns
Planning, design and installation of
irrigation schemes -- Guide for acquisition
of site data
Planning, design and installation of
irrigation schemes -- Guide to irrigation
water requirements
Water cooling towers -- Glossary of terms
BS EN ISO 3098-5 Technical product
documentation - Lettering - Part 5 : CAD
lettering of the Latin alphabet, numerals
and marks
Water cooling towers -- Code of practice
for thermal and functional design
Planning, design and installation of
irrigation schemes -- Guide to water
resources
BS EN 2133 Cadmium plating of steels
with specified tensile strength &leq;1 450
MPa, copper, copper alloys and nickel
alloys
Planning, design and installation of
irrigation schemes -- Guide for irrigation
equipment
Planning, design and installation of
irrigation schemes -- Guide for feasibility
and implementation procedures
Agricultural irrigation equipment -Specification for emitters
Agricultural irrigation equipment -Specification for emitting pipe systems
Specification for compression knapsack
sprayers
Specification for sizes of black-and-white
photographic sheet film for general,
professional and industrial use
Glossary of terms for equipment for crop
protection
Spraying equipment for crop protection -Specification for connecting dimensions
for nozzles and manometers
Spraying equipment for crop protection -Specification for dimensions of connection
threading
Specification for slides and film strips
BS 6356 : Part 4
BS 6356 : Part 5
BS 6356 : Part 6
BS 6356 : Part 7
BS 1722 : Part 10
BS 1722 : Part 11
BS 5128
BS 1722 : Part 12
BS 1722 : Part 13
BS 1722 : Part 14
BS 1722 : Part 16
BS 1722 : Part 2
BS 1722 : Part 3
BS 1722 : Part 4
BS 7293
BS 5699 : Part 1
BS 1722 : Part 7
BS 5699 : Part 2
BS 1722 : Part 8
BS EN 60966-2-4
Spraying equipment for crop protection -Specification for performance limits for
field spraying nozzles
Spraying equipment for crop protection -Specification for tank nominal volume and
filling hole diameter
Spraying equipment for crop protection -Specification for connecting dimensions
for nozzles with bayonet fixing
Spraying equipment for crop protection -Guide for typical data sheet layout
Fence -- Specification for anti-intruder
fences in chain link and welded mesh
Fence -- Specification for woven wood and
lap boarded panel fences
Specification for sizes of film for graphic
arts use
Fence -- Specification for steel palisade
fences
Fence -- Chain link fences for tennis court
surrounds
Fence -- Specifications for open mesh steel
panel
Fence -- Specification for organic powder
coatings to be used as a plastics finish to
components and mesh
Fences -- Specification for rectangular wire
mesh and hexagonal wire netting fences
Fences -- Specification for strained wire
fences
Fences -- Specification for cleft chestnut
pale fences
Method of test for equipment for
distributing granulated pesticides or
herbicides
Processed photographic film for archival
records -- Specifications for silver-gelatin
type on cellulose ester base
Fences -- Specification for wooden post
and rail fences
Processed photographic film for archival
records -- Specifications for silver-gelatin
type on poly(ethylene terephthalate) base
Fences -- Specification for mild steel (low
carbon steel) continuous bar fences
BS EN 60966-2-4 Radio frequency and
BS 1722 : Part 9
BS 3470
BS 7411
BS 5709
BS ISO 6
BS ISO 6686
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.0
BS ISO 417
BS ISO 491
BS ISO 543
BS ISO 732
BS ISO 897
BS 5588 : Part 1
BS 5588 : Part 10
BS 5588 : Part 2
BS 5588 : Part 3
coaxial cable assemblies - Part 2-4 : Detail
specification for cable assemblies for radio
and TV receivers
Fences -- Specification for mild steel (low
carbon steel) fences with round or square
verticals and flat horizontals
Specification for field gates and posts
Specification for lever operated knapsack
sprayers
Specification for stiles, bridle gates and
kissing gates
Photography. Black-and-white pictorial
still camera negative film/process systems.
Determination of ISO speed
Equipment for crop protection. Anti-drip
devices. Determination of performance
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- External works
Photography. Determination of residual
thiosulfate and other related chemicals in
processed photographic materials. Methods
using iodine-amylose, methylene blue and
silver sulfide
Cinematography. 35 mm motion-picture
film and magnetic film. Cutting and
perforating dimensions
Photography. Photographic films.
Specifications for safety film
Photography. Film dimensions. 120 and
220 sizes
Photography. Roll films, 126, 110 and 135
size films. Identification of the imagebearing side
Fire precautions in the design, construction
and use of buildings -- Code of practice for
residential buildings
Fire precautions in the design, construction
and use of buildings -- Code of practice for
shopping complexes
Fire precautions in the design, construction
and use of buildings -- Code of practice for
shops
Fire precautions in the design, construction
and use of buildings -- Code of practice for
office buildings
BS 5588 : Part 5
BS 5588 : Part 4
BS 5588 : Part 6
BS 5588 : Part 9
BS 1562 : Part 2
BS ISO 1007
BS 4026 : Part 3
BS 4026 : Part 4
BS ISO 1008
BS EN 61196-3-3
BS 4394
BS ISO 1009
BS 5137
BS ISO 1048
BS 2972
BS ISO 2240
BS 7560
Fire precautions in the design, construction
and use of buildings -- Code of practice for
firefighting stairs and lifts
Fire precautions in the design, construction
and use of buildings -- Code of practice for
smoke control in protected escape routes
using pressurization
Fire precautions in the design, construction
and use of buildings -- Code of practice for
places of assembly
Fire precautions in the design, construction
and use of buildings -- Code of practice for
ventilation and air conditioning ductwork
Specification for agricultural mower and
combine-harvester parts -- Metric units
Photography. 135-size film and magazine.
Specifications
Specification for rod and links for root
machinery -- Potato elevator diggers and
main elevators on complete potato
harvesters : metric units
Specification for rod and links for root
machinery -- Carrot and sugar beet
harvesters : metric units
Photography. Paper dimensions. Pictorial
sheets
BS EN 61196-3-3 Radio frequency cables Part 3-3 : Coaxial cables for digital
communication in horizontal floor wiring Detail specification for coaxial cables with
foamed dielectric for local area networks of
185 m reach and up to 10 Mb/s
Specification for topping knives for Sugar
beet harvesters. Metric units
Photography. Paper dimensions. Rolls for
printers
Specification for requirements for the
compatible operation of forage harvesting
machinery
Photography. Exposed roll films.
Identification
Methods of test for inorganic thermal
insulating materials
Photography. Colour reversal camera films.
Determination of ISO speed
Method of assessing, testing and reporting
BS 3533
BS EN 61196-3-2
BS ISO 3029
BS 3869
BS 3958 : Part 1
BS 3958 : Part 2
BS ISO 3772
BS 3958 : Part 3
BS 3958 : Part 4
BS 3958 : Part 5
BS ISO 3897
BS 3958 : Part 6
BS ISO 4090
BS 4841 : Part 1
BS 4841 : Part 2
characteristics and performance of combine
harvesters
Glossary of thermal insulation terms
BS EN 61196-3-2 Radio frequency cables Part 3-2 : Coaxial cables for digital
communication in horizontal floor wiring Detail specification for coaxial cables with
solid dielectric for local area networks of
185 m reach and up to 10 Mb/s
Photography. 126 size cartridges.
Dimensions of cartridge, film and backing
paper
Specification for rigid expanded polyvinyl
chloride for thermal insulation purposes
and building applications
Thermal insulating materials -- Thermal
insulating materials Magnesia preformed
insulation
Thermal insulating materials -- Thermal
insulating materials Calcium silicate
preformed insulation
Photography. Film dimensions. Rolls for
photocomposition
Thermal insulating materials -- Thermal
insulating materials Metal mesh faced manmade mineral fibre mattresses
Thermal insulating materials -- Thermal
insulating materials Bonded preformed
man-made mineral fibre pipe sections
Thermal insulating materials -- Thermal
insulating materials Specification for
bonded man-made mineral fibre slabs
Photography. Processed photographic
plates. Storage practices
Thermal insulating materials -- Thermal
insulating materials Finishing materials;
hard setting composition, self-setting
cement and gypsum plaster
Photography. Film dimensions. Medical
radiography
Rigid polyurethane (PUR) and
polyisocyanurate (PIR) foam for building
applications -- Specification for laminated
board for general purposes
Rigid polyurethane (PUR) and
polyisocyanurate (PIR) foam for building
BS 4841 : Part 3
BS ISO 4330
BS 5241 : Part 1
BS ISO 5655
BS 5241 : Part 2
BS ISO 5799
BS 5617
BS 5618
BS ISO 5800
BS 5803 : Part 4
BS 5803 : Part 1
applications -- Laminated board for use as
a wall and ceiling insulation
Rigid polyurethane (PUR) and
polyisocyanurate (PIR) foam for building
applications -- Specification for two types
of laminated board (roofboards) with autoadhesively bonded reinforcing facings for
use as roofboard thermal insulation for
built-up roofs
Photography. Determination of the curl of
photographic film and paper
Rigid polyurethane (PUR) and
polyisocyanurate (PIR) foam when
dispensed or sprayed on a construction site
-- Specification for sprayed foam thermal
insulation applied externally
Photography. Film dimensions. Industrial
radiography
Rigid polyurethane (PUR) and
polyisocyanurate (PIR) foam when
dispensed or sprayed on a construction site
-- Specification for dispensed foam for
thermal insulation or buoyancy
applications
Photography. Direct-exposing medical and
dental radiographic film/process systems.
Determination of ISO speed and ISO
average gradient
Specification for urea-formaldehyde (UF)
foam systems suitable for thermal
insulation of cavity walls with masonry or
concrete inner and outer leaves
Code of practice for thermal insulation of
cavity walls (with masonry or concrete
inner and outer leaves) by filling with ureaformaldehyde (UF) foam systems
Photography. Colour negative films for still
photography. Determination of ISO speed
Thermal insulation for use in pitched roof
spaces in dwellings -- Methods for
determining flammability and resistance to
smouldering
Thermal insulation for use in pitched roof
spaces in dwellings -- Specification for
man-made mineral fibre thermal insulation
mats
BS 5803 : Part 2
BS EN 130100
BS 6676 : Part 1
BS ISO 6846
BS 5803 : Part 3
BS 5803 : Part 5
BS 3456 : Part 2 : Section 2.32
BS 6676 : Part 2
BS ISO 7004
BS EN 130101
BS EN 130102
BS 7386
BS 7457
BS 7643 : Part 1
BS 3456 : Part 2 : Section 2.42
Thermal insulation for use in pitched roof
spaces in dwellings -- Specification for
man-made mineral fibre thermal insulation
in pelleted or granular form for application
by blowing
NULL
Thermal insulation of cavity walls using
man-made mineral fibre batts (slabs) -Specification for man-made mineral fibre
batts (slabs)
Photography. Black and white continuous
tone papers. Determination of ISO speed
and ISO range for printing
Thermal insulation for use in pitched roof
spaces in dwellings -- Specification for
cellulose fibre thermal insulation for
application by blowing
Thermal insulation for use in pitched roof
spaces in dwellings -- Specification for
installation of man-made mineral fibre and
cellulose fibre insulation
Specification for safety of household and
similar electrical appliances Particular
requirements Mains-operated electric
lawnmowers
Thermal insulation of cavity walls using
man-made mineral fibre batts (slabs) -Code of practice for installation of batts
(slabs) filling the cavity
Photography. Industrial radiographic film.
Determination of ISO speed and average
gradient when exposed to X- and yradiation
NULL
NULL
Specification for draughtstrips for the
draught control of existing doors and
windows in housing (including test
methods)
Specification for polyurethane (PUR) foam
systems suitable for stabilization and
thermal insulation of cavity walls with
masonry or concrete inner and outer leaves
Building construction. Expression of users'
requirements -- Thermal requirements
Specification for safety of household and
BS 5107
BS EN ISO 4320
BS 8208 : Part 1
BS 5708
BS EN 823
BS EN 824
BS EN 825
BS 4585-9
BS ISO 10110-8
BS 2750 : Part 1
BS 2750 : Part 4
BS 2750 : Part 6
BS 2750 : Part 5
BS 2750 : Part 7
BS 5363
BS 5821 : Part 2
similar electrical appliances Particular
requirements Battery-operated lawnmowers
Specification for powered lawnmowers
BS EN ISO 4320 Non-ionic surface active
agents - Determination of cloud point index
- Volumetric method
Guide to assessment of suitability of
external cavity walls for filling with
thermal insulants -- Existing traditional
cavity construction
Specification for pruner shears (secateurs)
Thermal insulating products for building
applications. Determination of thickness
Thermal insulating products for building
applications. Determination of squareness
Thermal insulating products for building
applications. Determination of flatness
BS 4585-9 Methods of test for spices and
condiments - Part 9 : Determination of
acid-insoluble ash
BS ISO 10110-8 Optics and optical
instruments - Preparation of drawings for
optical elements and systems - Part 8 :
Surface texture
Measurement of sound insulation in
buildings and of building elements -Recommendations for laboratories
Measurement of sound insulation in
buildings and of building elements -- Field
measurements of airborne sound insulation
between rooms
Measurement of sound insulation in
buildings and of building elements -Laboratory measurements of impact sound
insulation of floors
Measurement of sound insulation in
buildings and of building elements -- Field
measurements of airborne sound insulation
of facade elements and facades
Measurement of sound insulation in
buildings and of building elements -- Field
measurements of impact sound insulation
of floors
Method for measurement of reverberation
time in auditoria
Methods for rating the sound insulation
BS 5821 : Part 3
BS 6177
BS ISO 10110-8
BS EN ISO 13783
BS 7643 : Part 3
BS ISO 10602
BS 8233
BS ISO 4433-1
BS ISO 4433-3
BS ISO 4433-2
BS EN 50229
BS ISO 11313
buildings and of building elements -Method for rating the impact sound
insulation
Methods for rating the sound insulation
buildings and of building elements -Method for rating the airborne sound
insulation of facade elements and fa‡ades
Guide to selection and use of elastomeric
bearings for vibration isolation of buildings
BS ISO 10110-8 Optics and optical
instruments - Preparation of drawings for
optical elements and systems - Part 8 :
Surface texture
BS EN ISO 13783 Plastics piping systems Unplasticized poly(vinyl chloride) (PVCU) end-load-bearing double-socket joints Test method for leaktightness and strength
while subjected to bending and internal
pressure
Building construction. Expression of users'
requirements -- Acoustical requirements
Photography. Processed silver-gelatin type
black-and-white film. Specifications for
stability
Code of practice for sound insulation and
noise reduction for buildings
BS ISO 4433-1 Thermoplastics pipes Resistance to liquid chemicals Classification - Part 1 : Immersion test
method
BS ISO 4433-3 Thermoplastics pipes Resistance to liquid chemicals Classification - Part 3 : Unplasticized
poly(vinyl chloride) (PVC-U), high-impact
poly(vinyl chloride) (PVC-HI) and
chlorinated poly(vinyl chloride) (PVC-C)
pipes
BS ISO 4433-2 Thermoplastics pipes Resistance to liquid chemicals Classification - Part 2 : Polyolefin pipes
BS EN 50229 Electric clothes washerdryers for household use - Methods of
measuring the performance
Photography. Disposable cassettes
containing photocomposition film and
paper. Dimensions and related
CP 153 : Part 3
BS EN 29052-1
BS 743
BS 6398
BS 6477
BS EN ISO 140-3
BS EN 20140-2
BS EN 20140-10
BS 5766-4
BS 2769 : Part 2 : Section 2.14
BS IEC 60747-5-2
BS IEC 60747-5-3
BS 6576
BS 6385
requirements
Windows and rooflights -- Sound
insulation
Acoustics. Method for the determination of
dynamic stiffness -- Materials used under
floating floors in dwellings
Specification for materials for damp-proof
courses
Specification for bitumen damp-proof
courses for masonry
Specification for water repellents for
masonry surfaces
Acoustics. Measurement of sound
insulation in buildings and of building
elements -- Laboratory measurement of
airborne sound insulation of building
elements
Acoustics. Measurement of sound
insulation in buildings and of building
elements -- Determination, verification and
application of precision data
Acoustics. Measurement of sound
insulation in buildings and of building
elements -- Laboratory measurement of
airborne sound insulation of small building
elements
BS 5766-4 Methods for analysis of animal
feeding stuffs - Part 4 : Determination of
nitrogen content and calculation of crude
protein content
Hand-held electric motor-operated tools -Particular requirements -- Specification for
hedge trimmers and scissor-type grass
shears
BS IEC 60747-5-2 Discrete semiconductor
devices and integrated circuits - Part 5-2 :
Optoelectronic devices - Essential ratings
and characteristics
BS IEC 60747-5-3 Discrete semiconductor
devices and integrated circuits - Part 5-3 :
Optoelectronic devices - Measuring
methods
Code of practice for installation of
chemical damp-proof courses
Method of specifying performance
requirements for winches on forestry
BS 7643 : Part 2
BS 5570
BS 6916 : Part 1
BS 6916 : Part 3
BS 6916 : Part 6
BS 6916 : Part 8
BS ISO 418
BS 8102
BS 6916 : Part 10
BS ISO 420
BS 6916 : Part 2
BS 8215
BS ISO 422
BS 6916 : Part 4
BS ISO 423
BS 6916 : Part 5
BS 6916 : Part 7
BS ISO 424
CP 102
BS 6916 : Part 9
BS ISO 3298
machinery
Building construction. Expression of users'
requirements -- Air purity requirements
Specification for photographic grade
sodium carbonate, monohydrate
Chain saws -- Glossary of terms
Chain saws -- Specification for dimensions
of front hand guards
Chain saws -- Method of measurement of
airborne noise at the operator's position
Chain saws -- Method of measurement of
hand- transmitted vibration
Photography. Processing chemicals.
Specifications for anhydrous sodium sulfite
Code of practice for protection of structures
against water from the ground
Chain saws -- Specification for longitudinal
balance
Photography. Processing chemicals.
Specifications for potassium bromide
Chain saws -- Method for specifying
requirements
Code of practice for design and installation
of damp-proof courses in masonry
construction
Photography. Processing chemicals.
Specifications for p-methylaminophenol
sulfate
Chain saws -- Specification for strength of
front hand guards
Photography. Processing chemicals.
Specification for hydroquinone
Chain saws -- Methods of evaluating chain
brake performance
Chain saws -- Method of evaluating engine
performance including fuel consumption
Photography. Processing chemicals.
Specification for anhydrous sodium
carbonate and sodium carbonate
monohydrate
Code of practice for protection of buildings
against water from the ground
Chain saws -- Specification for strength of
handles
Photography. Processing chemicals.
Specifications for glacial acetic acid
DD 86 : Part 2
BS ISO 3299
DD 86 : Part 3
DD 86: Part 1
BS 7136: Part 1
BS ISO 3617
BS ISO 3618
BS ISO 3619
BS ISO 3620
BS ISO 3621
BS 7705
DD ENV 61024-1
BS 7747
BS 8220 : Part 1
BS ISO 3623
BS ISO 3624
BS ISO 3625
BS IEC 60747-5-1
Damp-proof courses -- Method of test for
creep deformation
Photography. Processing chemicals.
Specifications for 1-phenyl-3pyrazolidinone
Damp-proof courses -- Guide to
characteristic strengths of damp-proof
course material used in masonry
Damp-proof courses -- Methods of test for
flexural bond strength and short term shear
strength
Brush saws -- Method of measurement at
the operator's position of emitted airborne
noise
Photography. Processing chemicals.
Specifications for sodium hydroxide
Photography. Processing chemicals.
Specifications for benzotriazole
Photography. Processing chemicals.
Specification for ammonium thiosulfate
solution
Photography. Processing chemicals.
Specifications for aluminium potassium
sulfate
Photography. Processing chemicals.
Specifications for sodium tetraborate
decahydrate
Specification for brake systems for special
wheeled forestry machines
Protection of structures against lightning -General principles
Forestry machinery. Portable brush cutters
and grass trimmers. Cutting attachment
guard strength
Guide for Security of buildings against
crime -- Dwellings
Photography. Processing chemicals.
Specifications for anhydrous potassium
carbonate
Photography. Processing chemicals.
Specifications for potassium ferricyanide
Photography. Processing chemicals.
Specifications for potassium hydroxide
BS IEC 60747-5-1 Discrete semiconductor
devices and integrated circuits - Part 5-1 :
Optoelectronic devices - General
BS ISO 3627
BS ISO 3628
BS ISO 3943
BS ISO 5989
BS 4363
BS 4447
BS 4484: Part 1
BS ISO 6850
BS 5228:Part 2
BS 5228:Part 4
BS IEC 60747-5-1
BS ISO 12925-1
BS ISO 7766-1
BS 5606
BS 5607
BS ISO 10348
Photography. Processing chemicals.
Specifications for anhydrous sodium
metabisulfite
Photography. Processing chemicals.
Specifications for boric acid, granular
Photography. Processing chemicals.
Specifications for anhydrous sodium
acetate
Photography. Pre-packaged chemicals for
the processing of silver halide based
photographic materials. Vocabulary
Specification for distribution assemblies
for electricity supplies for construction and
building sites
Specification for the performance of
prestressing anchorages for post-tensioned
construction
Specification for measuring instruments for
constructional works -- Metric graduation
and figuring of instruments for linear
measurement
Photography. Processing wastes.
Determination of nitrate by a spectrometric
method using brucine
Noise control on construction and open
sites -- Guide to noise control legislation
for construction and demolition, including
road construction and maintenance
Code of practice for noise and vibration
control applicable to piling operations
BS IEC 60747-5-1 Discrete semiconductor
devices and integrated circuits - Part 5-1 :
Optoelectronic devices - General
BS ISO 12925-1 Lubricants, industrial oils
and related products (class L) - Family C
(Gears) - Part 1 : Specifications for
lubricants for enclosed gear systems
Photography. Processing wastes. Analysis
of cyanides -- Determination of
hexacyanoferrate(II) and
hexacyanoferrate(III) by spectrometry
Guide to accuracy in building
Code of practice for safe use of explosives
in the construction industry
Photography. Processing wastes.
Determination of silver content
BS ISO 10636
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.3
BS EN 584-1
BS EN 608
BS ISO 11786
BS ISO 11787
BS 5550 : Part 1 : Section 1.11 :
Subsection 1.11.
BS 6187
BS 7307 : Part 2
BS 4156
BS 7334: Part 4
BS 5550 : Part 1 : Section 1.2 : Subsection
1.2.1
BS 5550 : Part 1 : Section 1.3 : Subsection
1.3.1
BS EN ISO 11960
BS EN ISO 11960
Photography. Processing chemicals.
Specification for anhydrous sodium
thiosulfate and sodium thiosulfate
pentahydrate
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Setting out and measurement
Non-destructive testing. Industrial
radiographic film -- Classification of film
systems for industrial radiography
Agricultural and forestry machinery.
Portable chain saws. Safety
Agricultural tractors and machinery.
Tractor mounted sensor interface.
Specification
Machinery for agriculture and forestry.
Data interchange between management
computer and process computers. Data
interchange syntax
Cinematography -- 8 mm film -- Spindles - Specification for dimensions of spindles
for 8 mm Type S motion-picture projector
spools
Code of practice for demolition
Building tolerances. Measurement of
buildings and building products -- Position
of measuring points
Recommendations for peat for horticultural
and landscape use
Measuring instruments for building
construction -- Methods for determining
accuracy in use of theodolites
Cinematography -- 8 mm film -- Image
areas -- Specification for positions and
dimensions of the image area produced by
camera aperture and maximum projectable
image area on 8 mm Type R motionpicture film
Cinematography -- 8 mm film -- Camera
usage -- Specification for camera usage of
8 mm type R motion-picture film
BS EN ISO 11960 Petroleum and natural
gas industries - Steel pipes for use as
casing or tubing for wells
BS EN ISO 11960 Petroleum and natural
BS EN ISO 11960
BS 5550 : Part 1 : Section 1.3 : Subsection
1.3.3
BS 5550 : Part 1 : Section 1.4 : Subsection
1.4.3
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.8
BS 5550 : Part 1 : Section 1.4 : Subsection
1.4.5
BS 5550 : Part 1 : Section 1.4 : Subsection
1.4.6
BS 5550 : Part 2 : Section 2.1 : Subsection
2.1.1
BS 5550 : Part 2 : Section 2.11 :
Subsection 2.11.
BS EN ISO 10993-1
BS 7334: Part 5
BS 7334: Part 6
BS 5551 : Part 1 : Section 1.3
gas industries - Steel pipes for use as
casing or tubing for wells
BS EN ISO 11960 Petroleum and natural
gas industries - Steel pipes for use as
casing or tubing for wells
Cinematography -- 8 mm film -- Camera
usage -- Specification for claw-to-gate
distance in 8 mm Type R spool-leading
cinematograph equipment
Cinematography -- 8 mm film -- Sound -Specification for location and width of
magnetic striping and gaps of recording
and reproducing heads for magnetic sound
record on 8 mm motion-picture film with
picture
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Signs and signing
Cinematography -- 8 mm film -- Sound -Specification for position and width
dimensions of photographic sound record
on 8 mm Type S motion-picture prints
Cinematography -- 8 mm film -- Sound -Specification for recorded characteristics
for magnetic sound record on 8 mm Type S
motion-picture prints and full-coat
magnetic film perforated 8 mm Type S
Cinematography -- 16 mm film -- Raw
stock -- Specification for the cutting and
perforating dimensions of 16 mm motionpicture film and magnetic film
Cinematography -- 16 mm film -- Spindles
-- Specification for dimensions of spindles
for 16 mm motion-picture camera and
projector spools
BS EN ISO 10993-1 Biological evaluation
of medical devices - Part 1 : Evaluation and
testing
Measuring instruments for building
construction -- Methods for determining
accuracy in use of optical plumbing
instruments
Measuring instruments for building
construction -- Methods for determining
accuracy in use of laser instruments
Fertilizers -- Terminology and labelling --
BS 7334: Part 7
BS 5550 : Part 2 : Section 2.11 :
Subsection 2.11.
BS 5550 : Part 2 : Section 2.12 :
Subsection 2.12.
BS 5550 : Part 2 : Section 2.2 : Subsection
2.2.1
BS 5550 : Part 2 : Section 2.2 : Subsection
2.2.3
BS 5550 : Part 2 : Section 2.4 : Subsection
2.4.1
PD 6619
BS ISO 6025
BS EN 61000-3-3
BS 5550 : Part 2 : Section 2.4 : Subsection
2.4.4
BS 5550 : Part 2 : Section 2.7 : Subsection
Specification for marking of containers
(packages, drums, etc.) and labels
Measuring instruments for building
construction -- Methods for determining
accuracy in use of instruments when used
for setting out
Cinematography -- 16 mm film -- Spindles
-- Specification for Dimensions of spool
spindles for 16mm cinematograph
equipment
Cinematography -- 16 mm film -Miscellaneous -- Specification for test film
for assessing the picture performance of 16
mm motion-picture projectors
Cinematography -- 16 mm film -- Image
areas -- Specification for position and
dimensions of the image produced by 16
mm motion-picture camera aperture
Cinematography -- 16 mm film -- Image
areas -- Specification for positions and
dimensions of picture image area and
photographic sound record on 16 mm
motion-picture release prints
Cinematography -- 16 mm film -- Sound -Specification for positions and dimensions
of 16 mm negative photographic sound
record on 16 mm 35/16 mm and 35/32 mm
motion-picture film
PD 6619 Copper and copper alloys Provisions and procedures for the
allocation of material numbers and
registration of materials
BS ISO 6025 Cinematography Photographic sound test films, 35 mm and
16 mm - Specifications
BS EN 61000-3-3 Electromagnetic
compatibility (EMC) - Part 3 : Limits Section 3 : Limitation of voltage
fluctuations and flicker in low-voltage
supply systems for equipment with rated
current &leq; 16 A
Cinematography -- 16 mm film -- Sound -Specification for positions and width
dimensions of recording head gaps for two
sound records on 16 mm magnetic film
Cinematography -- 16 mm film --
2.7.2
BS 5550 : Part 2 : Section 2.9 : Subsection
2.9.1
BS 5550 : Part 2 : Section 2.9 : Subsection
2.9.2
BS 5550 : Part 2 : Section 2.9 : Subsection
2.9.3
BS 5551 : Part 1 : Section 1.1
BS 5551 : Part 2 : Section 2.4
BS 5551 : Part 3 : Section 3.6
BS EN 1236
BS EN 1237
BS 5550 : Part 3 : Section 3.1 : Subsection
3.1.2
BS EN 140400
BS EN 60118-2
BS 2520
BS 5550 : Part 3 : Section 3.12 :
Subsection 3.12.
Projection -- Specification for the
performance of 16 mm sound-film
projectors
Cinematography -- 16 mm film -- Projector
spools -- Specification for dimensions of
spools for 16 mm motion-picture projectors
(up to and including 120 m capacity : 18
cm size)
Cinematography -- 16 mm film -- Projector
spools -- Specification for spools for 16
mm motion-picture projectors (from 244 m
to 610 m capacity : 24 cm to 38 cm size)
Cinematography -- 16 mm film -- Projector
spools -- Specification for 16 mm film
spools of 2400 ft capacity for specialized
equipment
Fertilizers -- Terminology and labelling -Classification
Fertilizers -- Sampling -- Practical
arrangements for final samples
Fertilizers -- Physical properties -- Method
for determination of static angle of repose
of solid fertilizers
Fertilizers. Determination of bulk density
(loose)
Fertilizers. Determination of bulk density
(tapped)
Cinematography -- 35 mm film -- Raw
stock -- Specification for the dimensional
features of magnetic coatings on 35 mm
perforated film
BS EN 140400 Harmonized system of
quality assessment for electronic
components - Sectional specification:
Fixed low power surface mounting (SMD)
resistors
BS EN 60118-2 Hearing aids - Part 2 :
Methods for measurement of
electroacoustical characteristics of hearing
aids with automatic gain control circuits
BS 2520 Specification for Barometer
conventions and tables, their application
and use
Cinematography -- 35 mm film -Sprockets -- Miscellaneous -- Specification
for metal cans for processed 35 mm
BS EN 60947-5-5
BS 5550 : Part 3 : Section 3.2 : Subsection
3.2.2
BS 7334: Part 8
BS 5550 : Part 3 : Section 3.4 : Subsection
3.4.8
BS 5550 : Part 3 : Section 3.4 : Subsection
3.4.9
BS 5550 : Part 3 : Section 3.9 : Subsection
3.9.1
BS 5550 : Part 4 : Section 4.2 : Subsection
4.2.1
BS 5550 : Part 4 : Section 4.4 : Subsection
4.4.1
BS 5551 : Part 1 : Section 1.2
BS 5551 : Part 2 : Section 2.1
BS 5551 : Part 2 : Section 2.2
BS 5551 : Part 2 : Section 2.3
motion-picture film
BS EN 60947-5-5 Low-voltage switchgear
and controlgear - Part 5-5 : Control circuit
devices and switching elements - Electrical
emergency stop devices with mechanical
latching function
Cinematography -- 35 mm film -- Image
areas -- Specification for the position and
dimensions of the maximum projectable
image area on 35 mm motion-picture film
Measuring instruments for building
construction -- Methods for determining
accuracy in use of electronic distancemeasuring instruments up to 150 m
Cinematography -- 35 mm film -- Sound -Specification for the lateral positions and
width dimensions of two-track negative
photographic sound records on 35 mm
motion-picture film
Cinematography -- 35 mm film -- Sound -Specification for reproduction
characteristics of the A-chain frequency
response for 35 mm photographic sound
Cinematography -- 35 mm film -- Projector
spools -- Specification for 35 mm film
spools of 610 m capacity (38 cm size) for
release prints
Cinematography -- 65 mm and 70 mm film
-- Image areas -- Specification for positions
and dimensions of image area produced by
65 mm and 70 mm motion-picture camera
aperture and maximum projectable image
area on 70 mm motion-picture prints
Cinematography -- 65 mm and 70 mm film
-- Sound -- Specification for the location
and dimensions of six-track magnetic
sound records on 70 mm motion-picture
release prints with magnetic stripes
Fertilizers -- Terminology and labelling -Glossary of terms
Fertilizers -- Sampling -- Simple sampling
method for small lots of solid fertilizer
Fertilizers -- Sampling -- Presentation of
sampling reports
Fertilizers -- Sampling -- Sampling from a
conveyor by stopping the belt [reference
BS 5550 : Part 4 : Section 4.4 : Subsection
4.4.2
BS 7011 : Part 3 : Section 3.2
BS 5550 : Part 5 : Section 5.12 :
Subsection 5.12.
BS 5551 : Part 2 : Section 2.10
BS EN 474-5
BS 5550 : Part 5 : Section 5.2 : Subsection
5.2.1
BS 5550 : Part 5 : Section 5.4 : Subsection
5.4.1
BS 5550 : Part 5 : Section 5.4 : Subsection
5.4.3
BS 5550 : Part 5 : Section 5.4 : Subsection
5.4.5
method]
Cinematography -- 65 mm and 70 mm film
-- Sound -- Specification for the
reproduction characteristics of the A-chain
frequency response for 70 mm motionpicture release prints with magnetic stripes
BS 7011 : Part 3 : Section 3.2 Consumable
accessories for light microscopes - Part 3 :
Cover glasses - Section 3.2 : Specification
for materials and quality of finish
Cinematography -- Common to more than
one film gauge -- Miscellaneous -Specification for the minimum information
for the labelling of containers for the
exchange of motion picture film and
magnetic materials
Fertilizers -- Sampling -- Method of
checking the performance of mechanical
devices for sampling of solid fertilizer
moving in bulk
BS EN 474-5 Earth-moving machinery Safety - Part 5 : Requirements for hydraulic
excavators
Cinematography -- Common to more than
one film gauge -- Image areas -Specification for dimensions and locations
of the maximum permissible area for
subtitles on 35 mm and 16 mm motionpicture release prints
Cinematography -- Common to more than
one film gauge -- Sound -- Code of
Practice for the identification of systems
for synchronization of unperforated audio
tape with motion-picture film and
videotape
Cinematography -- Common to more than
one film gauge -- Sound -- Specification
for positions and width dimensions of
recording and reproducing head gaps for
three-, four- or six-track magnetic sound
records on 35 mm and single-track on 17.5
mm motion-pict
Cinematography -- Common to more than
one film gauge -- Sound -- Specification
for basic technical characteristics of
magnetic sound test films excluding striped
BS 5550 : Part 5 : Section 5.4 : Subsection
5.4.6
BS 5550 : Part 5 : Section 5.5 : Subsection
5.5.1
BS 5551 : Part 2 : Section 2.7
BS 5551 : Part 2 : Section 2.8
BS 5551 : Part 2 : Section 2.9
BS 5551 : Part 3 : Section 3.3
BS EN 474-6
BS 5550 : Part 6 : Section 6.1
BS 5550 : Part 6 : Section 6.4
BS 5551 : Part 3 : Section 3.4
BS 5551 : Part 4 : Section 4.1 : Subsection
4.1.1
BS 5551 : Part 4 : Section 4.1 : Subsection
4.1.2
release prints
Cinematography -- Common to more than
one film gauge -- Sound -- Method for
measurement of the signal to noise ratio of
8 mm type, 16 mm and 35 mm variable
area photographic sound records
Cinematography -- Common to more than
one film gauge -- Printing -- Specification
for optical printing ratios for enlargement
and reduction of motion-picture film
images
Fertilizers -- Sampling -Recommendations for minimum mass of
increment of a solid fertilizer to be taken to
be representative of the total sampling unit
Fertilizers -- Sampling -- Methods for
preparation of samples of solid fertilizer for
chemical and physical analysis
Fertilizers -- Sampling -- Sampling plan for
the evaluation of a large delivery of solid
fertilizer
Fertilizers -- Physical properties -- Method
for determination of bulk density (loose) of
fine-grained fertilizers
BS EN 474-6 Earth-moving machinery Safety - Part 6 : Requirements for dumpers
Cinematography -- Television usage -Specification for motion-picture prints and
sound records for international exchange of
television programmes
Cinematography -- Television usage -Recommendations for the density range,
contrast and colour balance of films and
slides for colour television
Fertilizers -- Physical properties -- Method
for determination of oil retention of high
nitrogen content, straight ammonium
nitrate fertilizers
Fertilizers -- Chemical analysis -Determination of nitrogen -- Nitron
gravimetric method for determination of
nitrate nitrogen
Fertilizers -- Chemical analysis -Determination of nitrogen -- Determination
of ammoniacal nitrogen, titrimetric method
after distillation
DD ENV 12498
BS 5551 : Part 4 : Section 4.1 : Subsection
4.1.3
BS 5551 : Part 4 : Section 4.1 : Subsection
4.1.4
DD ENV 12498
BS 5550 : Part 7 : Section 7.2 : Subsection
7.2.6
BS 5551 : Part 4 : Section 4.1 : Subsection
4.1.5
BS 5550 : Part 7 : Section 7.4 : Subsection
7.4.1
BS 5551 : Part 4 : Section 4.2 : Subsection
4.2.1
BS 5551 : Part 4 : Section 4.4 : Subsection
4.4.2
BS 5551 : Part 4 : Section 4.5
BS 5550 : Part 7 : Section 7.5 : Subsection
7.5.1
DD ENV 12498 Paper and board intended
to come into contact with foodstuffs Determination of cadmium, lead and
chromium in an aqueous extract
Fertilizers -- Chemical analysis -Determination of nitrogen -- Method for
determination of total nitrogen content
(titrimetric method after distillation)
Fertilizers -- Chemical analysis -Determination of nitrogen -- Method for
determination of ammoniacal nitrogen
content in the presence of other substances
which release ammonia when treated with
sodium hydroxide (titrimetric method)
DD ENV 12498 Paper and board intended
to come into contact with foodstuffs Determination of cadmium, lead and
chromium in an aqueous extract
Cinematography -- Production and
presentation -- Screens and screen
luminance -- Specification for screen
luminance and colour for the projection of
motion-picture prints in indoor theatres and
review rooms
Fertilizers -- Chemical analysis -Determination of nitrogen -- Method for
determination of urea nitrogen content
(gravimetric method using xanthydrol)
Cinematography -- Production and
presentation -- Sound -- Specifications and
measurements for the B-chain electroacoustic response of motion-picture control
rooms and indoor theatres
Fertilizers -- Chemical analysis -Determination of phosphorus -- Extraction
of water-soluble phosphates
Fertilizers -- Chemical analysis -Determination of water -- Gravimetric
method by drying at 105øC
Fertilizers -- Chemical analysis -- Method
for determination of mineral-acid-soluble
sulfate content of solid fertilizers
Cinematography -- Production and
presentation -- Film and television location
lighting -- Code of practice for distribution
of a.c. electricity for location lighting
BS 5551 : Part 4 : Section 4.2 : Subsection
4.2.2
BS 5550 : Part 7 : Section 7.5 : Subsection
7.5.2
BS 5550 : Part 7 : Section 7.5 : Subsection
7.5.3
BS 5551 : Part 4 : Section 4.2 : Subsection
4.2.3
BS 5551 : Part 4 : Section 4.3 : Subsection
4.3.1
BS ISO 3058
BS ISO 3057
BS EN 60432-2
BS 5551 : Part 4 : Section 4.3 : Subsection
4.3.2
BS 5551 : Part 4 : Section 4.3 : Subsection
4.3.3
BS 5551 : Part 4 : Section 4.3 : Subsection
4.3.4
BS 5551 : Part 4 : Section 4.4 : Subsection
4.4.1
Fertilizers -- Chemical analysis -Determination of phosphorus -- Extraction
of phosphates soluble in mineral acids
Cinematography -- Production and
presentation -- Film and television location
lighting -- Specification for location
lighting power distribution units
Cinematography -- Production and
presentation -- Film and television location
lighting -- Specification for plugs and
socket connectors
Fertilizers -- Chemical analysis -Determination of phosphorus -- Method for
determination of phosphorus content
(quinoline molybdophosphate gravimetric
method)
Fertilizers -- Chemical analysis -Determination of potassium -- Preparation
of the test solution for determination of
water-soluble potassium content
BS ISO 3058 Non-destructive testing Aids to visual inspection - Selection of
low-power magnifiers
BS ISO 3057 Non-destructive testing Metallographic replica techniques of
surface examination
BS EN 60432-2 Safety specification for
incandescent lamps - Part 2 : Tungsten
halogen lamps for domestic and similar
general lighting purposes
Fertilizers -- Chemical analysis -Determination of potassium -- Preparation
of the test solution for determination of
acid-soluble potassium content
Fertilizers -- Chemical analysis -Determination of potassium -- Method for
determination of water-soluble potassium
content (potassium tetraphenylborate
gravimetric method : reference method)
Fertilizers -- Chemical analysis -Determination of potassium -- Method for
determination of potassium content
(titrimetric method)
Fertilizers -- Chemical analysis -Determination of water -- Gravimetric
method by drying under reduced pressure
BS 8000 : Part 1
BS 8000 : Part 11 : Section 11.2
BS 8000 : Part 11 : Section 11.1
BS 8000 : Part 12
BS 8000 : Part 14
BS 5693
BS 8000 : Part 15
BS 8000 : Part 2 : Section 2.2
BS 8000 : Part 3
BS 8000 : Part 4
BS 8000 : Part 5
BS 8000 : Part 7
BS 8000 : Part 8
BS EN ISO 4080
BS 8000 : Part 9
BS ISO 4246
BS 1831 : Part 1
BS 4172 : Part 1
Workmanship on building sites -- Code of
practice for excavation and filling
Workmanship on building sites -- Code of
practice for wall and floor tiling -- Natural
stone tiles
Workmanship on building sites -- Code of
practice for wall and floor tiling -- Ceramic
tiles, terrazzo tiles and mosaics
Workmanship on building sites -- Code of
practice for decorative wallcoverings and
painting
Workmanship on building sites -- Code of
practice for below ground drainage
BS 5693 Recommendations for Preferred
diameters of wire terminations of
capacitors and resistors
Workmanship on building sites -- Code of
practice for hot and cold water services
(domestic scale)
Workmanship on building sites -- Code of
practice for concrete work -- Sitework with
in situ and precast concrete
Workmanship on building sites -- Code of
practice for masonry
Workmanship on building sites -- Code of
practice for waterproofing
Workmanship on building sites -- Code of
practice for carpentry, joinery and general
fixings
Workmanship on building sites -- Code of
practice for glazing
Workmanship on building sites -- Code of
practice for plasterboard partitions and dry
linings
BS EN ISO 4080 Rubber and plastics hoses
and hose assemblies - Determination of
permeability to gas
Workmanship on building sites -- Code of
practice for cement/sand floor screeds and
concrete floor toppings
Cinematography. Vocabulary
Common names for pesticides -- Guide to
principles for selection of common names
Hand-held pressurized aerosol dispensers
against houseflies -- Specification for
insecticidal efficiency
BS 4172 : Part 2
BS 4533: Part 101
BS 4926
BS 4533: Part 102: Section 102.1
BS 4533: Part 102: Section 102.10
BS 4533: Part 102: Section 102.17
BS 4533: Part 102: Section 102.19
BS 4533: Part 102: Section 102.22
BS 4533: Part 102: Section 102.4
BS 4533: Part 102: Section 102.5
BS 4533: Part 102: Section 102.51
BS EN 60432-1
BS 4533: Part 102: Section 102.55
BS 4533: Part 102: Section 102.8
BS 6279 : Part 3
BS 4533: Part 102: Section 102.9
BS 4533: Part 103: Section 103.2
Hand-held pressurized aerosol dispensers
against houseflies -- Method for
determination of insecticidal efficiency
Luminaires -- Specification for general
requirements and tests
Specification for dichlorophen
Luminaires -- Particular requirements -Specification for fixed general purpose
luminaires
Luminaires -- Particular requirements -Specification for portable child-appealing
luminaires
Luminaires -- Particular requirements -Specification for luminaires for stage
lighting, television, film and photographic
studios (outside and indoor)
Luminaires -- Particular requirements -Specification for air-handling luminaires
(safety requirements)
Luminaires -- Particular requirements -Specification for luminaires for emergency
lighting
Luminaires -- Particular requirements -Specification for portable general purpose
luminaires
Luminaires -- Particular requirements -Specification for floodlights
Luminaires -- Particular requirements -Specification for luminaires with type of
protection N
BS EN 60432-1 Safety specification for
incandescent lamps - Part 1 : Tungsten
filament lamps for domestic and similar
general lighting purposes
Luminaires -- Particular requirements -Specification for luminaires for hospitals
and health care buildings
Luminaires -- Particular requirements -Specification for handlamps
Storage of cereals and pulses -- Guide to
control of attack by pests
Luminaires -- Particular requirements -Specification for photo and film luminaires
(non-professional)
Luminaires -- Performance requirements -Specification for photometric
BS 5763 : Part 0
BS 5763 : Part 1
BS 5763 : Part 10
BS 5763 : Part 11
BS 5763 : Part 13
BS 5763 : Part 14
BS 5763 : Part 15
BS 5763 : Part 16
BS 5763 : Part 2
BS 5763 : Part 3
BS 5763 : Part 4
BS 5763 : Part 5
BS 5763 : Part 6
characteristics of luminaires for hospitals
and health care buildings
Methods for microbiological examination
of food and animal feeding stuffs -General laboratory practices
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of micro-organisms - colony
count technique at 30øC
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Enterobacteriaceae
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Bacillus cereus
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Escherichia coli : colony
count technique using membranes
Methods for microbiological examination
of food and animal feeding stuffs -Detection of Vibrio parahaemolyticus
Methods for microbiological examination
of food and animal feeding stuffs -Detection of Enterobacteriaceae with preenrichment
Methods for microbiological examination
of food and animal feeding stuffs -Detection of presumptive pathogenic
Yersinia enterocolitica
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of coliforms - colony count
technique
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of coliforms. Most probable
number technique
Methods for microbiological examination
of food and animal feeding stuffs -Detection of Salmonella
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of micro-organisms - colony
count at 30øC (surface plate technique)
Methods for microbiological examination
BS 5763 : Part 7
BS 5763 : Part 9
BS 5763 : Part 8
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.7
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.1
BS 5766 : Part 1
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.2
BS 5766 : Part 10
BS 5766 : Part 11
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.3
BS 5766 : Part 12
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.5
BS 5766 : Part 14
BS 6100 : Part 1 : Section 1.5 : Subsection
1.5.6
of food and animal feeding stuffs -Preparation of dilutions
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Staphylococcus aureus by
colony count technique
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Clostridium perfringens
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of presumptive Escherichia
coil. Most probable number technique
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Drawings
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Coordination of dimensions; tolerances
and accuracy
Methods for analysis of animal feeding
stuffs -- Determination of crude ash
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Jointing
Methods for analysis of animal feeding
stuffs -- Preparation of test samples
Methods for analysis of animal feeding
stuffs -- Determination of calcium by
titration
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Setting out and measurement
Determination of gossypol
Glossary of building and civil engineering
terms -- General and miscellaneous -Operations; associated plant and equipment
-- Plant and equipment
Methods for analysis of animal feeding
stuffs -- Determination of urea content
Glossary of building and civil engineering
terms -- General and miscellaneous --
BS 5766 : Part 2
BS 5766 : Part 6
BS 5766 : Part 7
BS 6100 : Part 6 : Section 6.5
BS 5766 : Part 9
BS 1139 : Part 1 : Section 1.1
BS 4406
BS 1139 : Part 1 : Section 1.2
BS 1139 : Part 4
BS 4440
BS 1305
BS 1139 : Part 2 : Section 2.2
BS ISO/TR 8363
BS 1139 : Part 5
BS 4650
BS 4674
BS 4763
BS 6911-13
Operations; associated plant and equipment
-- Documentation excluding drawings
Methods for analysis of animal feeding
stuffs -- Determination of ash insoluble in
hydrochloric acid
Methods for analysis of animal feeding
stuffs -- Determination of calcium by
atomic absorption spectrometry
Methods for analysis of animal feeding
stuffs -- Determination of aflatoxin B1
Glossary of building and civil engineering
terms -- Concrete and plaster -- Formwork
Methods for analysis of animal feeding
stuffs -- Determination of castor oil seed
husks
Metal scaffolding -- Tubes -- Specification
for steel tube
Specification for the designation in the tex
system of netting yarns for fishing nets
Metal scaffolding -- Tubes -- Specification
for aluminium tube
Metal scaffolding -- Specification for
prefabricated steel splitheads and trestles
Glossary of basic terms for fishing nets
Specification for batch type concrete
mixers
Metal scaffolding -- Couplers -Specification for steel and aluminium
couplers, fittings and accessories for use in
tubular scaffolding
BS ISO/TR 8363 Measurement of liquid
flow in open channels - General guidelines
for the selection of method
Metal scaffolding -- Specification for
materials, dimensions, design loads and
safety requirements for service and
working scaffolds made of prefabricated
elements
Method for the determination of the mesh
breaking load of netting for fishing
Methods for the determination of the
breaking lead and knot breaking lead of
netting yarns for fishing nets
Methods for cutting knotted netting to
shape (tapering)
BS 6911-13 Testing earth-moving
BS 1676
BS 1707
BS 5171
BS 2482
BS 5172
BS 5398
BS 5414
BS 5202:Part 1
BS 5202:Part 10
BS 5202:Part 11
BS 5202:Part 12
BS 5202:Part 13
BS 5202:Part 14
BS 5202:Part 3
BS 5202:Part 4
BS 5381 : Part 5
machinery - Part 13 : Methods of
measuring the masses of whole machines,
their equipment and components
Specification for heaters for tar and
bitumen (mobile and transportable)
Specification for hot binder distributors for
road surface dressing
Specification for netting yarns:
determination of change in length after
immersion in water
Specification for timber scaffold boards
Specification for fishing nets: description
and designation of knotted netting
Classification of methods for mounting and
joining of fishing nets
Method of test for determination of
elongation of netting yarns for fishing nets
Methods for chemical analysis of tobacco
and tobacco products -- Determination of
silica content
Methods for chemical analysis of tobacco
and tobacco products -- Determination of
organochlorine pesticide residues
Methods for chemical analysis of tobacco
and tobacco products -- Determination of
dithiocarbamate residues
Methods for chemical analysis of tobacco
and tobacco products -- Determination of
nicotine in smoke condensate of cigarettes
(gas-chromatographic method)
Methods for chemical analysis of tobacco
and tobacco products -- Determination of
water in smoke condensate of cigarettes
(gas-chromatographic method)
Methods for chemical analysis of tobacco
and tobacco products -- Determination of
total and nicotine-free dry particulate
matter using a routine analytical smoking
machine
Methods for chemical analysis of tobacco
and tobacco products -- Expression of
analytical results
Methods for chemical analysis of tobacco
and tobacco products -- Determination of
alkaloid content (spectrometric method)
Methods for determination of physical
BS 5202:Part 15
BS 5202:Part 9
BS 5381 : Part 2
BS 5381 : Part 3
BS 5381 : Part 6
BS 5668 : Part 1
BS 4074
BS 5507 : Part 1
BS 5743
BS 5507 : Part 3
BS 5973
BS EN 161
BS 6245 : Part 1
BS 6245 : Part 2
BS 6245 : Part 3
properties of tobacco and tobacco products
-- Draw resistance of cigarettes and filter
rods
Methods for chemical analysis of tobacco
and tobacco products -- Determination of
water in smoke condensates of cigarettes
(Karl Fischer method)
Methods for chemical analysis of tobacco
and tobacco products -- Determination of
alkaloid retention by filters of cigarettes
(spectrometric method)
Methods for determination of physical
properties of tobacco and tobacco products
-- Nominal diameter of cigarettes and
filters (pneumatic method)
Methods for determination of physical
properties of tobacco and tobacco products
-- Determination of free combustion rate of
cigarettes
Methods for determination of physical
properties of tobacco and tobacco products
-- Ventilation of cigarettes
Routine analytical cigarette smoking
machine -- Specification and standard
conditions
Specification for metal props and struts.
Methods of test for falsework equipment -Floor centres
Specification for atmosphere for
conditioning and testing tobacco and
tobacco products
Methods of test for falsework equipment -Props
Code of practice for access and working
scaffolds and special scaffold structures in
steel
BS EN 161 Automatic shut-off valves for
gas burners and gas appliances
Sampling tobacco and tobacco products -Method of sampling batches of raw
material (general principles)
Sampling tobacco and tobacco products -Method of preparing samples for
collaborative studies
Sampling tobacco and tobacco products -Methods of sampling cigarettes
BS 7680
BS 7212
BS ISO 7197
DD ENV 1099
BS AU 50 : Part 1 : Section 4 : Subsection
4.1a
BS 1247 : Part 1
BS 1247 : Part 2
BS 1247 : Part 3
BS 6100 : Part 1 : Section 1.2
BS 6100 : Part 2 : Section 2.8
BS 7770
BS AU 50 : Part 1 : Section 4 : Subsection
4.2a
PD 6501 : Part 5
BS 1377 : Part 1
BS EN ISO 10545-5
BS AU 50 : Part 1 : Section 4 : Subsection
Glossary of terms for tobacco and tobacco
products
Code of practice for safe use of
construction hoists
BS ISO 7197 Neurosurgical implants Sterile, single-use hydrocephalus shunts
and components
DD ENV 1099 Plywood - Biological
durability - Guidance for the assessment of
plywood for use in different hazard classes
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
for designations and dimensions for ply
rating marked series tyres
Manhole steps -- Specification for
galvanized ferrous or stainless steel
manhole steps
Manhole steps -- Specification for plastics
encapsulated manhole steps
Manhole steps -- Specification for
aluminium manhole steps
Glossary of building and civil engineering
terms -- General and miscellaneous -Spaces
Glossary of building and civil engineering
terms -- Civil engineering -- Pipelines and
ducts
Guide to the preparation of climatic data
and its application to building and civil
engineering
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
for load ratings for ply rating marked series
tyres
The preparation of British Standards for
building and civil engineering -- Guide to
technical committees on the preparation of
performance specifications in British
Standards for construction products
Methods of test for soils for civil
engineering purposes -- General
requirements and sample preparation
BS EN ISO 10545-5 Ceramic tiles - Part 5 :
Determination of impact resistance by
measurement of coefficient of restitution
Tyres and wheels -- Tyres -- Agricultural
4.3a
BS AU 50 : Part 1 : Section 4 : Subsection
4.4a
BS 1377 : Part 5
BS EN 60838-1
BS 7012 : Part 1
BS 1377 : Part 6
BS 1377 : Part 7
BS 1377 : Part 8
BS AU 50 : Part 1 : Section 4 : Subsection
4.7
BS 7011 : Part 2 : Section 2.2
BS 1377 : Part 9
BS 4447
BS 5228:Part 4
BS 6031
BS 6100 : Part 2 : Section 2.2 : Subsection
2.2.1
tractor and machine tyres -- Specification
for classification codes and nomenclature
for ply rating marked series tyres
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
for ply rating marked series tyres for log
skidders
Methods of test for soils for civil
engineering purposes -- Compressibility,
permeability and durability tests
BS EN 60838-1 Specification for
miscellaneous lampholders - Part 1 :
General requirements and tests
BS 7012 : Part 1 Light microscopes - Part 1
: Specification for the magnifying power of
microscope imaging components
Methods of test for soils for civil
engineering purposes -- Consolidation and
permeability tests in hydraulic cells and
with pore pressure measurement
Methods of test for soils for civil
engineering purposes -- Shear strength tests
(total stress)
Methods of test for soils for civil
engineering purposes -- Shear strength tests
(effective stress)
Tyres and wheels -- Tyres -- Agricultural
tractor and machine tyres -- Specification
for marking, dimensions, load ratings and
reference speeds for service description
marked tyres for agricultural tractor drive
wheels
BS 7011 : Part 2 : Section 2.2 Consumable
accessories for light microscopes - Part 2 :
Slides - Section 2.2 : Specification for
materials and quality of finish
Methods of test for soils for civil
engineering purposes -- In-situ tests
Specification for the performance of
prestressing anchorages for post-tensioned
construction
Code of practice for noise and vibration
control applicable to piling operations
Code of practice for earthworks
Glossary of building and civil engineering
terms -- Civil engineering -- Substructures.
BS 6100 : Part 2 : Section 2.2 : Subsection
2.2.2
BS 8002
BS 8004
BS 8006
BS 8103 : Part 1
BS 5400 : Part 1
BS 5400 : Part 2
BS 5400 : Part 3
BS ISO 8584-1
BS EN 131702
BS 5400 : Part 9 : Section 9.1
BS EN 131701
BS 6068-1.9
BS 6068-1.9
BS AU 50 : Part 1 : Subsection 6.6a
BS AU 50 : Part 1 : Subsection 6.6a
Earthworks. Foundations. Tunnels -Earthworks
Glossary of building and civil engineering
terms -- Civil engineering -- Substructures.
Earthworks. Foundations. Tunnels -Substructures and foundations
Code of practice for earth retaining
structures
Code of practice for foundations
Code of practice for
strengthened/reinforced soils and other fills
Structural design of low-rise buildings -Code of practice for stability, site
investigation, foundations and ground floor
slabs for housing
Steel, concrete and composite bridges -General statement
Steel, concrete and composite bridges -Specification for loads
Steel, concrete and composite bridges -Code of practice for design of steel bridges
BS ISO 8584-1 Thermoplastics pipes for
industrial applications under pressure Determination of the chemical resistance
factor and of the basic stress - Part 1 :
Polyolefin pipes
NULL
Steel, concrete and composite bridges -Bridge bearings -- Code of practice for
design of bridge bearings
NULL
BS 6068-1.9 Water quality - Part 1 :
Glossary - Section 1.9 : Alphabetical list
and subject index
BS 6068-1.9 Water quality - Part 1 :
Glossary - Section 1.9 : Alphabetical list
and subject index
BS AU 50 : Part 1 : Subsection 6.6a Tyres
and wheels - Part 1 : Tyres - Section 6 :
Motorcycle tyres - Subsection 6.6a :
Method of test for verifying tyre
capabilities
BS AU 50 : Part 1 : Subsection 6.6a Tyres
and wheels - Part 1 : Tyres - Section 6 :
Motorcycle tyres - Subsection 6.6a :
Method of test for verifying tyre
BS 6100 : Part 2 : Section 2.3
BS 6779 : Part 1
BS 6164
BS 594: Part 2
BS 2499 : Part 1
BS 6779 : Part 3
BS 6100 : Part 2 : Section 2.2 : Subsection
2.2.3
BS 6100 : Part 2 : Section 2.4 : Subsection
2.4.1
BS 598 : Part 109
BS AU 50 : Part 1 : Subsection 4.8
BS AU 50 : Part 1 : Subsection 4.8
capabilities
Glossary of building and civil engineering
terms -- Civil engineering -Superstructures. Bridges. Large span
structures
Highway parapets for bridges and other
structures -- Specification for vehicle
containment parapets of metal construction
Code of practice for safety in tunnelling in
the construction industry
Hot rolled asphalt for roads cud other
paved areas -- Specification for the
transport, laying and compaction of rolled
asphalt
Hot-applied joint sealant systems for
concrete pavements -- Specification for
joint sealants
Highway parapets for bridges and other
structures -- Specification for vehicle
containment parapets of combined metal
and concrete construction
Glossary of building and civil engineering
terms -- Civil engineering -- Substructures.
Earthworks. Foundations. Tunnels -Tunnels
Glossary of building and civil engineering
terms -- Civil engineering -- Highway,
railway and airport engineering -- Highway
engineering
Sampling and examination of bituminous
mixtures for roads and other paved areas -Methods for the assessment of the
compaction performance of a roller and
recommended procedures for the
measurement of the temperature of
bituminous mixtures
BS AU 50 : Part 1 : Subsection 4.8 Tyres
and wheels - Part 1 : Tyres - Section 4 :
Agricultural tractor and machine tyres Subsection 4.8 : Method of measuring tyre
rolling circumference for agricultural
tractor drive wheels
BS AU 50 : Part 1 : Subsection 4.8 Tyres
and wheels - Part 1 : Tyres - Section 4 :
Agricultural tractor and machine tyres Subsection 4.8 : Method of measuring tyre
BS 2499 : Part 2
BS 2499 : Part 3
BS 4987:Part 2
BS 5931
BS EN ISO 10591
BS EN ISO 10590
BS 7263 : Part 2
BS 7533
BS 505
BS 3262 : Part 1
BS 3262 : Part 3
BS 4631
BS 5911 : Part 230
BS 6044
BS 6088
BS EN 60335-2-51
rolling circumference for agricultural
tractor drive wheels
Hot-applied joint sealant systems for
concrete pavements -- Code of practice for
the application and use of joint sealants
Hot-applied joint sealant systems for
concrete pavements -- Methods of test
Coated macadam for roads and other paved
areas -- Specification for transport, laying
and compaction
Code of practice for machine laid in situ
edge details for paved areas
BS EN ISO 10591 Building construction Sealants - Determination of
adhesion/cohesion properties after
immersion in water
BS EN ISO 10590 Building construction Sealants - Determination of
adhesion/cohesion properties at maintained
extension after immersion in water
Precast concrete flags, kerbs, channels,
edgings and quadrants -- Code of practice
for laying
Guide for structural design of pavements
constructed with clay or concrete block
pavers
Specification for road traffic signals
Hot-applied thermoplastic road marking
materials -- Specification for constituent
materials and mixtures
Hot-applied thermoplastic road marking
materials -- Specification for application of
material to road surfaces
Specification for parking discs
Precast concrete pipes, fittings and
ancillary products -- Specification for road
gullies and gully cover slabs
Specification for pavement marking paints
Specification for solid glass beads for use
with road marking compounds and for
other industrial uses
BS EN 60335-2-51 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.51 :
Stationary circulation pumps for heating
and service water installations
BS 6571 : Part 1
BS 6571 : Part 2
BS 6571 : Part 3
BS 6571 : Part 5
BS 6571 : Part 4
BS 6579 : Part 1
BS 6579 : Part 3
BS 6579 : Part 5
BS 6579 : Part 4
BS 6579 : Part 6
BS 6579 : Part 7
BS 6579 : Part 8
BS 7818
PD 6518
BS 3143 : Part 2
BS 3143 : Part 4
Vehicle parking control equipment -Specification for coin operated clockwork
parking meters
Vehicle parking control equipment -Specification for electrically powered
parking meters
Vehicle parking control equipment -Specification for pay and display
equipment
Vehicle parking control equipment -Guide to the requirements for non-coin
operated apparatus for use with parking
control equipment
Vehicle parking control equipment -Specification for barrier type parking
control equipment
Safety fences and barriers for highways -Specification for components for tensioned
corrugated beam safety fence on Z posts
Safety fences and barriers for highways -Specification for components for tensioned
rectangular hollow section beam (100 mm
x 100 mm) safety fence
Safety fences and barriers for highways -Specification for open box beam safety
fence (single height)
Safety fences and barriers for highways -Specification for components for tensioned
rectangular hollow section beam (200 mm
x 100 mm) safety fence
Safety fences and barriers for highways -Specification for components for open box
beam safety fence (double height)
Safety fences and barriers for highways -Specification for components for
untensioned corrugated beam safety fence
Safety fences and barriers for highways -Specification for concrete safety barriers
Specification for pedestrian restraint
systems in metal
Prefabricated temporary road marking
materials for use at road works
Road danger lamps -- Specification for
low-intensity battery-operated lamps
Road danger lamps -- Specification for
high intensity battery operated beacons
BS EN ISO 7494
BS 5489 : Part 2
BS 5489 : Part 5
BS 5489 : Part 6
BS 5489 : Part 8
BS 5649 : Part 2
BS 5649 : Part 3
BS EN ISO/IEC 7816-5
BS EN ISO 9047
BS EN ISO 11432
BS 5649 : Part 4
BS 5649 : Part 5
BS 5649 : Part 6
BS 5649 : Part 7
BS 5649 : Part 9
BS EN ISO 10563
BS 5649 : Part 8
BS 7654
BS EN ISO 7494 Dental units
Road lighting -- Code of practice for
lighting for traffic routes
Road lighting -- Code of practice for
lighting for grade-separated junctions
Road lighting -- Code of practice for
lighting for bridges and elevated roads
Road lighting -- Road lighting. Code of
practice for lighting for roads near
aerodromes, railways, docks and navigable
waterways
Lighting columns -- Dimensions and
tolerances
Lighting columns -- Specification for
materials and welding requirements
BS EN ISO/IEC 7816-5 Identification
cards - Integrated circuit(s) cards with
contacts - Part 5 : Numbering system and
registration procedure for application
identifiers
BS EN ISO 9047 Building construction Sealants - Determination of
adhesion/cohesion properties at variable
temperatures
BS EN ISO 11432 Building construction Sealants - Determination of resistance to
compression
Lighting columns -- Recommendations for
surface protection of metal lighting
columns
Lighting columns -- Specification for base
compartments and cableways
Lighting columns -- Specification for
design loads
Lighting columns -- Method for
verification of structural design by
calculation
Lighting columns -- Specification of
special requirements for reinforced and
prestressed concrete lighting columns
BS EN ISO 10563 Building construction Sealants for joints - Determination of
change in mass and volume
Lighting columns -- Method for
verification of structural design by testing
Specification for single phase street
BS EN 40-1
BS 64
BS 3810 : Part 7
BS 6100 : Part 2 : Section 2.4 : Subsection
2.4.2
BS 6100 : Part 2 : Section 2.4 : Subsection
2.4.3
BS 6100 : Part 2 : Section 2.6
BS 6349 : Part 2
BS 6349 : Part 3
BS 6349 : Part 4
BS 6349 : Part 6
BS 6349 : Part 7
BS 6349 : Part 1
BS 6100 : Part 2 : Section 2.5
BS 6100 : Part 3 : Section 3.4
BS 8206 : Part 2
BS 8206 : Part 1
BS 2049
BS 4533: Part 102: Section 102.22
lighting fuses (cut-outs) for low-voltage
public electricity distribution systems. 25 A
rating for highway power supplies and
street furniture
Lighting columns -- Definitions and terms
Specification for normal and high strength
steel bolts and nuts for railway rail
Glossary of terms used in materials
handling -- Terms used in connection with
aerial ropeways and cableways
Glossary of building and civil engineering
terms -- Civil engineering -- Highway,
railway and airport engineering -- Railway
engineering
Glossary of building and civil engineering
terms -- Civil engineering -- Highway,
railway and airport engineering -- Airport
engineering
Glossary of building and civil engineering
terms -- Civil engineering -- Natural
waters. Inland. Coastal. Marine
Maritime structures -- Design of quay
walls, jetties and dolphins
Maritime structures -- Design of dry docks,
locks, slipways and shipbuilding berths,
shiplifts and dock and lock gates
Maritime structures -- Code of practice for
design of fendering and mooring systems
Maritime structures -- Design of inshore
moorings and floating structures
Maritime structures -- Guide to the design
and construction of breakwaters
Maritime structures -- General criteria
Glossary of building and civil engineering
terms -- Civil engineering -- Hydraulic
engineering and construction work
Glossary of building and civil engineering
terms -- Services -- Lighting
Lighting for buildings -- Code of practice
for daylighting
Lighting for buildings -- Code of practice
for artificial lighting
Specification for kerosine (paraffin)
lighting appliances for domestic use
Luminaires -- Particular requirements -Specification for luminaires for emergency
BS 5266 : Part 1
BS 5266 : Part 3
BS 5268 : Part 3
BS 5268 : Part 4 : Section 4.1
BS 5268 : Part 4 : Section 4.2
BS ISO 23
BS 5268 : Part 7 : Section 7.1
BS 2488
BS 5268 : Part 7 : Section 7.2
BS 5268 : Part 7 : Section 7.3
BS 5268 : Part 7 : Section 7.4
BS 5268 : Part 7 : Section 7.5
BS 5268 : Part 7 : Section 7.6
BS ISO 25
BS ISO 26
lighting
Emergency lighting -- Code of practice for
the emergency lighting of premises other
than cinemas and certain other specified
premises used for entertainment
Emergency lighting -- Specification for
small power relays (electromagnetic) for
emergency lighting applications up to and
including 32 A
Structural use of timber -- Code of practice
for trussed rafter roofs
Structural use of timber -- Fire resistance of
timber structures -- Recommendations for
calculating fire resistance of timber
members
Structural use of timber -- Fire resistance of
timber structures -- Recommendations for
calculating fire resistance of timber stud
walls and joisted floor constructions
Cinematography. Camera usage of 35 mm
motion picture film. Specifications
Structural use of timber -Recommendations for the calculation basis
for span tables -- Domestic floor joists
BS 2488 Schedule of preferred numbers for
the resistance of resistors and the
capacitance of capacitors for
telecommunication equipment
Structural use of timber -Recommendations for the calculation basis
for span tables -- Joists for flat roofs
Structural use of timber -Recommendations for the calculation basis
for span tables -- Ceiling joists
Structural use of timber -Recommendations for the calculation basis
for span tables -- Ceiling binders
Structural use of timber -Recommendations for the calculation basis
for span tables -- Domestic rafters
Structural use of timber -Recommendations for the calculation basis
for span tables -- Purlins supporting rafters
Cinematography. Camera usage of 16 mm
motion picture film specification
Cinematography. Projector usage of 16 mm
CP 1007
BS 5268 : Part 7 : Section 7.7
BS ISO 29
BS ISO 359
BS ISO 1223
BS 1248 : Part 1
BS ISO 1787
BS 5492
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.7
BS EN ISO 11212-4
BS EN ISO 8030
BS EN ISO 8030
BS 6100 : Part 4 : Section 4.4
BS ISO 3639
BS 6452 : Part 1
BS ISO 6038
BS ISO 14615
motion-picture films for direct front
projection. Specifications
Maintained lighting for cinemas
Structural use of timber -Recommendations for the calculation basis
for span tables -- Purlins supporting
sheeting or decking
Cinematography. Projector usage of 8 mm
Type R silent motion-picture film for direct
front projection. Specifications
Cinematography. Projectable image area on
16 ram motion-picture prints. Dimensions
and location
Cinematography. Picture areas for motionpicture films and slides for television.
Position and dimensions
Wallcoverings in roll form -- Terms and
symbols
Cinematography. Camera usage of 8 mm
Type S motion-picture film. Specifications
Code of practice for internal plastering
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Finishes
BS EN ISO 11212-4 Starch and derived
products - Heavy metals content - Part 4 :
Determination of cadmium content by
atomic absorption spectrometry with
electrothermal atomization
BS EN ISO 8030 Rubber and plastics hoses
- Method of test for flammability
BS EN ISO 8030 Rubber and plastics hoses
- Method of test for flammability
Glossary of building and civil engineering
terms -- Forest products -- Carpentry and
joinery
Cinematography. Projection reels/spools 75
to 312 mm diameter for 8 mm Type S
motion-picture film. Dimensions and
specifications
Beads for internal plastering and dry lining
-- Specification for galvanized steel beads
Cinematography. Splices for use on 70
mm, 65 mm, 35 mm and 16 mm motionpicture films. Dimensions and locations
BS ISO 14615 Adhesives - Durability of
BS ISO 4115
BS ISO 7343
BS 7771
BS ISO 8590
BS 2911
BS 3755
BS 3621
BS 5725 : Part 1
BS 5872
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.6
BS 6459 : Part 1
BS 4317 : Part 4
BS 5763 : Part 0
BS 5763 : Part 1
BS 5763 : Part 10
BS 5763 : Part 11
structural adhesive joints - Exposure to
humidity and temperature under load
BS ISO 4115 Air cargo equipment Air/land pallet nets
Cinematography. Two-track photographic
sound records on 35 mm motion-picture
prints. Positions and width dimensions
Code of practice for pasteurization of milk
on farms and in small dairies
Cinematography. Audio records on 70 mm
motion picture release prints with magnetic
stripes. Recorded characteristic
Specification for letter plates
Methods of test for the assessment of odour
from packaging materials used for
foodstuffs
Specification for thief resistant locks
Emergency exit devices -- Specification for
panic bolts and panic latches mechanically
operated by a horizontal push-bar
Specification for locks and latches for
doors in buildings
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Jointing products,
builders' hardware and accessories
Door closers -- Specification for
mechanical performance of crank and rack
and pinion overhead closets
Methods of test for cereals and pulses -Determination of impurities, size, foreign
odours, insects, and species and variety in
pulses
Methods for microbiological examination
of food and animal feeding stuffs -General laboratory practices
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of micro-organisms - colony
count technique at 30øC
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Enterobacteriaceae
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Bacillus cereus
BS 5763 : Part 13
BS 5763 : Part 14
BS 5763 : Part 15
BS 5763 : Part 16
BS 5763 : Part 2
BS 5763 : Part 3
BS 5763 : Part 4
BS 5763 : Part 5
BS 5763 : Part 6
BS 5763 : Part 7
BS 5763 : Part 9
BS 6215 : Part 1
BS 5763 : Part 8
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Escherichia coli : colony
count technique using membranes
Methods for microbiological examination
of food and animal feeding stuffs -Detection of Vibrio parahaemolyticus
Methods for microbiological examination
of food and animal feeding stuffs -Detection of Enterobacteriaceae with preenrichment
Methods for microbiological examination
of food and animal feeding stuffs -Detection of presumptive pathogenic
Yersinia enterocolitica
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of coliforms - colony count
technique
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of coliforms. Most probable
number technique
Methods for microbiological examination
of food and animal feeding stuffs -Detection of Salmonella
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of micro-organisms - colony
count at 30øC (surface plate technique)
Methods for microbiological examination
of food and animal feeding stuffs -Preparation of dilutions
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Staphylococcus aureus by
colony count technique
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of Clostridium perfringens
Methods of test for agricultural food
products -- Determination of crude fibre
content (general method)
Methods for microbiological examination
of food and animal feeding stuffs -Enumeration of presumptive Escherichia
BS 6215 : Part 2
DD ENV 1798
BS 4317 : Part 1
BS 4317 : Part 10
BS 4317 : Part 11
BS 4317 : Part 12
BS 4317 : Part 13
BS 4317 : Part 15
BS 4317 : Part 16
DD ENV 1094-3
BS 4317 : Part 18
BS 4317 : Part 19
BS 4317 : Part 2
BS 4317 : Part 20
BS 4317 : Part 21
BS 4317 : Part 22
coil. Most probable number technique
Methods of test for agricultural food
products -- Determination of crude fibre
content (modified Scharrer method)
Paper and board intended to come into
contact with foodstuffs. Determination of
seven specified polychlorinated biphenyls
(PCB)
Methods of test for cereals and pulses -Determination of the mass of 1000 grains
Methods of test for cereals and pulses -Determination of ash of cereals and milled
cereal products
Methods of test for cereals and pulses -Determination of glycosidic hydrocyanic
acid in pulses
Methods of test for cereals and pulses -Determination of wet gluten in wheat flour
Methods of test for cereals and pulses -Determination of sedimentation index for
wheat (Zeleny test)
Methods of test for cereals and pulses -Determination of moisture content of maize
(milled and whole)
Methods of test for cereals and pulses -Determination of dry gluten in wheat flour
DD ENV 1094-3 Insulating refractory
products - Part 3 : Classification of ceramic
fibre products
Methods of test for cereals and pulses -Determination of hidden insect infestation
Methods of test for cereals and pulses -Determination of protein quality of wheat
by the sodium dodecyl sulphate (SDS) test
Methods of test for cereals and pulses -Determination of moisture content of
cereals and cereal products (reference
method)
Methods of test for cereals and pulses -Determination of water absorption of flour
and theological properties of doughs using
a farinograph
Methods of test for cereals and pulses -Determination of rheological properties of
doughs using an extensograph
Methods of test for cereals and pulses --
BS 4317 : Part 23
BS 4317 : Part 24
BS 4317 : Part 25
BS 4317 : Part 26
BS 4317 : Part 27
BS 4317 : Part 28
BS 4317 : Part 29
BS 4317 : Part 3
BS 4317 : Part 30
BS 4317 : Part 31
BS 4317 : Part 9
BS 4510
BS 4511
BS 3456 : Part 202 : Section 202.2
BS 5333
BS 5939
Determination of water absorption of flour
and rheological properties of doughs using
a valorigraph
Methods of test for cereals and pulses -Determination of bulk density of cereals,
called mass per hectolitre'
Methods of test for cereals and pulses -Method of checking the calibration of
moisture meters for cereals
Methods of test for cereals and pulses -Determination of wet gluten content in
wheat flour by mechanical means
Methods of test for cereals and pulses -Measurement of temperature of grain
during bulk storage
Methods of test for cereals and pulses -Determination of rheological properties of
doughs using an alveograph
Methods of test for cereals and pulses -Determination of viscosity of flour using
an amylograph
Methods of test for cereals and pulses -Determination of impurities of animal
origin in wheat flour and durum wheat
semolina
Methods of test for cereals and pulses -Determination of moisture content of
cereals and cereal products (routine
method)
Methods of test for cereals and pulses -Identification of wheat varieties by
electrophoresis
Methods of test for cereals and pulses -Determination of yellow pigment content
in durum wheat flour and semolina
Methods of test for cereals and pulses -Determination of falling number of cereals
Methods for sampling cereals (as grain)
Methods for sampling pulses (in bags)
Specification for safety of household and
similar electrical appliances Particular
requirements Vacuum cleaners and water
suction cleaning appliances
Methods for sampling cereals and pulses
(as milled products)
Glossary of terms for cereals and cereal
BS 3999 : Part 12
BS 6279 : Part 3
BS 5415 : Part 1
BS 6279 : Part 2
BS 5415 : Part 2 : Section 2.2 : Supplement
No. 1
BS 476 : Part 23
DD ENV 1402-6
BS ISO/IEC 14977
BS 6298
BS 6860
BS 6694
BS 7274
BS 7460
BS 5415 : Part 2 : Section 2.4
BS 2892
products
Methods of measuring the performance of
household electrical appliances -- Vacuum
cleaners
Storage of cereals and pulses -- Guide to
control of attack by pests
Safety of electrical motor-operated
industrial and commercial cleaning
appliances -- Specification for general
requirements
Storage of cereals and pulses -- Code of
practice for the storage of cereals and
pulses
Safety of electrical motor-operated
industrial and commercial cleaning
appliances -- Particular requirements -Specification for type H industrial vacuum
cleaners for dusts hazardous to health
BS 476 : Part 23 Fire tests on building
materials and structures - Part 23 : Methods
for determination of the contribution of
components to the fire resistance of a
structure
DD ENV 1402-6 Unshaped refractory
products - Part 6 : Measurement of physical
properties
BS ISO/IEC 14977 Information technology
- Syntactic Metalanguage - Extended BNF
Methods for automatic sampling of cereals
and milled cereal products by mechanical
means
Nomenclature for cereals, pulses and other
food grains
Specification for safety of power-driven
industrial brushes
Specification for wheat
Code of practice for use of spray extraction
machines on carpets and soft floor
coverings in hospitals
Safety of electrical motor-operated
industrial and commercial cleaning
appliances -- Particular requirements -Specification for high pressure water/steam
cleaning appliances
Specification for non-returnable wooden
trays for tomatoes
BS IEC 60076-8
BS 4585 : Part 11
BS 7611
BS EN 60335-2-10
BS 696 : Part 1
BS 696 : Part 2
BS 809
BS 4285 : Part 0
BS 4285 : Part 1 : Section 1.1
BS 4285 : Part 1 : Section 1.2
BS 4285 : Part 1 : Section 1.3
BS EN 60704-2-1
BS 4285 : Part 2 : Section 2.3
BS 7821 : Part 2 : Section 2.2
BS IEC 60076-8 Power transformers Application guide
Methods of test for spices and condiments - Determination of volatile organic sulphur
compounds in dehydrated garlic
Specification for potato storage boxes for
mechanical handling
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Floor treatment machines
and wet scrubbing machines
Determination of fat content of milk and
milk products (Gerber method) -Specification for apparatus
Determination of fat content of milk and
milk products (Gerber method) -- Methods
Methods for sampling of milk and milk
products
Microbiological examination for dairy
purposes -- General introduction
Microbiological examination for dairy
purposes -- Guide to general procedures -Sampling and preparation of samples
Microbiological examination for dairy
purposes -- Guide to general procedures -Diluents, media and apparatus and their
preparation and sterilization
Microbiological examination for dairy
purposes -- Guide to general procedures -Procedures for obtaining incubation
conditions
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Vacuum cleaners
Microbiological examination for dairy
purposes -- Methods of general application
for enumeration of microorganisms -Enumeration of microorganisms by surface
plate technique for colony count
BS 7821 : Part 2 : Section 2.2 Three phase
oil-immersed distribution transformers 50
Hz, from 50 to 2500 kVA with highest
voltage for equipment not exceeding 36 kV
- Part 2 : Distribution transformers with
cable boxes on the high voltage and/or low
BS 7844-3
BS 4285 : Part 4
BS 4285 : Part 5 : Section 5.2
BS 4285 : Part 5 : Section 5.3
BS 4285 : Part 2 : Section 2.5
BS 4285 : Part 2 : Section 2.6
BS 4285 : Part 3 : Section 3.1
BS 4285 : Part 3 : Section 3.10 :
Subsection 3.10.
BS 4285 : Part 3 : Section 3.10 :
Subsection 3.10.
BS 4285 : Part 3 : Section 3.10 :
Subsection 3.10.
voltag
BS 7844-3 Three phase dry-type
distribution transformers 50 Hz, from 100
to 2500 kVA, with highest voltage for
equipment not exceeding 36 kV - Part 3 :
Determination of the power rating of a
transformer loaded with non-sinusoidal
current
Microbiological examination for dairy
purposes -- Methods for assessment of
hygienic conditions
Microbiological examination for dairy
purposes -- Ancillary methods -Methylene blue reduction test for cream
and ice cream
Microbiological examination for dairy
purposes -- Ancillary methods -- Test for
inhibitory substances
Microbiological examination for dairy
purposes -- Methods of general application
for enumeration of microorganisms -Enumeration of bacteria by direct
microscopic counts
Microbiological examination for dairy
purposes -- Methods of general application
for enumeration of microorganisms -Enumeration of microorganisms by most
probable number technique
Microbiological examination for dairy
purposes -- Methods for detection and/or
enumeration of specific groups of
microorganisms -- Enumeration of
psychrotrophic microorganisms
Microbiological examination for dairy
purposes -- Methods for detection and/or
enumeration of specific groups of
microorganisms -- Staphylococcus aureus - Enumeration using the colony count
technique
Microbiological examination for dairy
purposes -- Methods for detection and/or
enumeration of specific groups of
microorganisms -- Staphylococcus aureus - Detection
Microbiological examination for dairy
purposes -- Methods for detection and/or
BS 4285 : Part 3 : Section 3.11
BS 4285 : Part 3 : Section 3.12
BS 4285 : Part 3 : Section 3.14
BS 4285 : Part 3 : Section 3.15
BS 4285 : Part 3 : Section 3.2
BS 4285 : Part 3 : Section 3.4 : Subsection
3.4.2
BS 4285 : Part 3 : Section 3.6
BS 5522
BS 6394 : Part 1
BS 6394 : Part 2
enumeration of specific groups of
microorganisms -- Staphylococcus aureus - Enumeration using the most probable
number technique
Microbiological examination for dairy
purposes -- Methods for detection and/or
enumeration of specific groups of
microorganisms -- Detection and
enumeration of faecal streptococci
Microbiological examination for dairy
purposes -- Methods for detection and/or
enumeration of specific groups of
microorganisms -- Enumeration of Bacillus
cereus.
Microbiological examination for dairy
purposes -- Methods for detection and/or
enumeration of specific groups of
microorganisms -- Enumeration of
mesophilic microorganisms
Microbiological examination for dairy
purposes -- Methods for detection and/or
enumeration of specific groups of
microorganisms -- Detection of Listeria
monocytogenes
Microbiological examination for dairy
purposes -- Methods for detection and/or
enumeration of specific groups of
microorganisms -- Enumeration of
thermoduric bacteria
Microbiological examination for dairy
purposes -- Methods for detection and/or
enumeration of specific groups of
microorganisms -- Enumeration of lipolytic
microorganisms Tributyrin agar method
Microbiological examination for dairy
purposes -- Methods for detection and/or
enumeration of specific groups of
microorganisms -- Enumeration of yeasts
and moulds
Specification for milk and milk products determination of fat content - Mojonniertype fat extraction flasks
Trace elements in milk and milk products - Method for the determination of copper
content (reference method)
Trace elements in milk and milk products -
BS 4285 : Part 3 : Section 3.7
BS EN 60214
BS EN ISO 7785-2
BS EN 60856
BS 4285 : Part 3 : Section 3.9 : Subsection
3.9.2
BS EN 60682
BS 5086:Part 6
BS 7037 : Part 1
BS 7037 : Part 2
BS 7142: Part 1
BS 7142: Part 2
BS 7142: Part 3
BS 7142: Part 4
- Method for the determination of iron
content (reference method)
Microbiological examination for dairy
purposes -- Methods for detection and/or
enumeration of specific groups of
microorganisms -- Enumeration of
coliform bacteria
BS EN 60214 On-load tap-changers
BS EN ISO 7785-2 Dental Handpieces Part 2 : Straight and geared angle
handpieces
BS EN 60856 Specification for Prerecorded optical reflective videodisk
system `Laser vision' 50 Hz/625 lines PAL
Microbiological examination for dairy
purposes -- Methods for detection and/or
enumeration of specific groups of
microorganisms -- Detection of Salmonella
-- Screening method using electrical
conductance
BS EN 60682 Method for Measuring the
pinch temperature of quartz-tungstenhalogen lamps
Analysis of butter -- Method for
determination of fat acidity and free fatty
acids in the fat of butter and milk fat
products (Reference method)
Sampling plans for milk and milk products
-- Specification for inspection by attributes
Sampling plans for milk and milk products
-- Inspection by variables
Methods for analysis of milk-based
products -- Determination of fat content of
milk-based infant foods by the RoeseGottlieb gravimetric method
Methods for analysis of milk-based
products -- Determination of fat content of
milk-based infant foods by the WeibullBerntrop gravimetric method
Methods for analysis of milk-based
products -- Determination of fat content of
milk-based edible ices and ice mixes by the
Weibull-Berntrop gravimetric method
Methods for analysis of milk-based
products -- Determination of fat content of
BS EN 60309-1
BS 734 : Part 1
BS 734 : Part 2
BS ISO 70
BS 1741 : Part 1
BS 1741 : Part 10 : Section 10.1
BS 1741 : Part 10 : Section 10.2
BS 1741 : Part 11
BS 1741 : Part 12
BS 1741 : Part 2
BS 1741 : Part 4
BS 1741 : Part 5 : Section 5.1
BS 1741 : Part 5 : Section 5.2
BS 1741 : Part 6 : Section 6.1
liquid, concentrated and dried milk
products by the Weibull-Berntrop
gravimetric method
BS EN 60309-1 Plugs, socket-outlets and
couplers for industrial purposes - Part 1 :
General requirements
Measurement of the density of milk using a
hydrometer -- Specification for
hydrometers for use in milk
Measurement of the density of milk using a
hydrometer -- Methods
Cinematography. Monophonic 35 mm
negative photographic sound record on 35
mm motion-picture film. Position and
maximum width dimensions
Methods for chemical analysis of liquid
milk and cream -- General introduction
including
Methods for chemical analysis of liquid
milk and cream -- Determination of
titratable acidity -- Method for liquid milk
Methods for chemical analysis of liquid
milk and cream -- Determination of
titratable acidity -- Method for cream
Methods for chemical analysis of liquid
milk and cream -- Detection of
detergent/disinfectant residues
Methods for chemical analysis of liquid
milk and cream -- Determination of total
phosphorus content of milk
Methods for chemical analysis of liquid
milk and cream -- Determination of total
solids content of liquid milk, cream and
unsweetened condensed milk
Methods for chemical analysis of liquid
milk and cream -- Determination of fat
content of cream
Methods for chemical analysis of liquid
milk and cream -- Determination of the
nitrogen content of liquid milk -- Reference
method
Methods for chemical analysis of liquid
milk and cream -- Determination of the
nitrogen content of liquid milk -- Routine
method
Methods for chemical analysis of liquid
BS 1741 : Part 6 : Section 6.2
BS 1741 : Part 7 : Section 7.1
BS 1741 : Part 7 : Section 7.2
BS 1741 : Part 8
BS 1742 : Part 4
BS 1742 : Part 5 : Section 5.1
BS 1742 : Part 5 : Section 5.2
BS ISO 1803
BS ISO 1803
BS 1742 : Part 6
BS 1743
BS 1743 : Part 1
BS 1743 : Part 11
BS ISO/IEC 8859-1
milk and cream -- Determination of casein
nitrogen content of liquid milk -- Reference
method
Methods for chemical analysis of liquid
milk and cream -- Determination of casein
nitrogen content of liquid milk -- Routine
method
Methods for chemical analysis of liquid
milk and cream -- Determination of lactose
content -- Reference method
Methods for chemical analysis of liquid
milk and cream -- Determination of lactose
content -- Routine method
Methods for chemical analysis of liquid
milk and cream -- Determination of
chloride content of liquid milk
Methods for chemical analysis of
condensed milks -- Determination of ash
from condensed milks
Methods for chemical analysis of
condensed milks -- Determination of
nitrogen content -- Reference method
Methods for chemical analysis of
condensed milks -- Determination of
nitrogen content -- Routine method
BS ISO 1803 Building construction Tolerances - Expression of dimensional
accuracy - Principles and terminology
BS ISO 1803 Building construction Tolerances - Expression of dimensional
accuracy - Principles and terminology
Methods for chemical analysis of
condensed milks -- Determination of
sucrose content of sweetened condensed
milk
Methods for analysis of dried milk and
dried milk products
Methods for analysis of dried milk and
dried milk products -- General
introduction, including preparation of
laboratory samples
Methods for analysis of dried milk and
dried milk products -- Determination of fat
content (gravimetric reference method)
BS ISO/IEC 8859-1 Information
technology - 8-bit single-byte coded
BS ISO IEC 8859-4
BS 1743 : Part 19
BS 1743 : Part 20
BS 1743 : Part 3
BS 1743 : Part 4
BS 1743 : Part 5
BS 1743 : Part 6 : Section 6.1
BS 1743 : Part 7 : Section 7.1
BS 1743 : Part 7 : Section 7.2
BS 1743 : Part 8
BS ISO 486
BS 3095 : Part 1 : Section 1.1
BS 3095 : Part 1 : Section 1.2
graphic character sets - Part 1 : Latin
alphabet No. 1
BS ISO IEC 8859-4 Information
technology - 8-bit single-byte coded
graphic character sets - Part 4 : Latin
alphabet No. 4
Methods for analysis of dried milk and
dried milk products -- Determination of
scorched particles content
Methods for analysis of dried milk and
dried milk products -- Determination of
sodium and potassium contents of dried
milk
Methods for analysis of dried milk and
dried milk products -- Determination of
insolubility index
Methods for analysis of dried milk and
dried milk products -- Determination of the
dispersibility and the wetting time of
instant dried milk
Methods for analysis of dried milk and
dried milk products -- Determination of
bulk density
Methods for analysis of dried milk and
dried milk products -- Assessment of the
heat class of dried milk -- Heat number
method (reference method)
Methods for analysis of dried milk and
dried milk products -- Determination of the
titrable acidity of dried milk -- Reference
method
Methods for analysis of dried milk and
dried milk products -- Determination of the
titrable acidity of dried milk -- Rutine
method
Methods for analysis of dried milk and
dried milk products -- Determination of
lactic acid and lactates content of dried
milk
Cinematography. 16 mm motion-picture
film perforated 8 mm Type R. Cutting and
perforating dimensions
Methods for determination of the freezingpoint depression of milk -- Methods -Thermistor cryoseope method
Methods for determination of the freezing-
BS 3095 : Part 2
BS 3095 : Part 3
BS ISO 490
BS 4938:Part 1
BS ISO 491
BS 5272
BS 6106
BS ISO/IEC 8859-10
BS ISO 1189
BS EN ISO 1211
BS ISO 1700
BS ISO/IEC 8859-13
BS EN 50083-2
point depression of milk -- Methods -Hortvet method
Methods for determination of the freezingpoint depression of milk -Recommendations for the interpretation of
the freezing-point depression of herd milk
Methods for determination of the freezingpoint depression of milk -- Storage of
samples
Cinematography. Magnetic stripes and
magnetic recording head gaps for sound
record on 16 mm motion-picture film
perforated along one edge (Type 1).
Positions and width dimensions
Dirt content of milk -- Method for the
determination of dirt content (reference
method)
Cinematography. 35 mm motion-picture
film and magnetic film. Cutting and
perforating dimensions
Method for simultaneous routine
determination of the water contents of a
batch of dried milk samples
Specification for 1 pint (568 ml) multi-trip
glass bottles for pasteurized milk
BS ISO/IEC 8859-10 Information
technology - 8-bit single-byte coded
graphic character sets - Part 10 : Latin
alphabet No. 6
Cinematography. Recorded characteristic
for magnetic sound records on 35 mm
motion-picture film excluding striped
release prints. Specifications
Milk. Determination of fat content.
Gravimetric method (reference method)
Cinematography. 8 mm type S motionpicture raw stock film. Cutting and
perforating dimensions
BS ISO/IEC 8859-13 Information
technology - 8-bit single-byte coded
graphic character sets - Part 13 : Latin
alphabet No. 7
BS EN 50083-2 Cabled distribution
systems for television, sound, and
interactive multimedia signals - Part 2 :
Electromagnetic compatibility for
BS 3456 : Part 202 : Section 202.4
BS 3456 : Part 202 : Section 202.7
BS 3456 : Part 202 : Section 202.43
BS 3456 : Part 202 : Section 202.11
BS 3999 : Part 7
BS 5258 : Part 17
BS 5086:Part 1
BS 6246 : Part 1
BS 5086:Part 3
BS EN 50083-2
BS 5086:Part 4
BS 5086:Part 5
BS 5086:Part 7
BS 6280
equipment
Specification for safety of household and
similar electrical appliances Particular
requirements Specification for safety of
household and similar electrical appliances.
Particular requirements. Spin extractors
Specification for safety of household and
similar electrical appliances Particular
requirements Washing machines
Specification for safety of household and
similar electrical appliances Particular
requirements Specification for safety of
household and similar electrical appliances.
Particular requirements. Clothes dryers and
towel rails
Specification for safety of household and
similar electrical appliances Particular
requirements Tumbler dryers
Methods of measuring the performance of
household electrical appliances -- Electric
irons
Safety of domestic gas appliances -Specification for direct gas-fired tumble
dryers (2nd and 3rd family gases)
Analysis of butter -- General introduction
including preparation of samples
Industrial laundry machinery -- Methods
for the assessment of the effect of rotary
washing machines on textiles
Analysis of butter -- Method for
determination of water content (routine
method)
BS EN 50083-2 Cabled distribution
systems for television, sound, and
interactive multimedia signals - Part 2 :
Electromagnetic compatibility for
equipment
Analysis of butter -- Method for
determination of salt content (reference
method)
Analysis of butter -- Method for
determination of salt content (routine
method)
Analysis of butter -- Method for
determination of pH of butter serum
Method of vacuum (backsiphonage) test for
BS 7624
BS EN 160100
BS ISO TR 5925-2
BS ISO TR 5925-2
BS EN ISO 3727
CP 335 : Part 1
BS 770 : Part 1
BS 770 : Part 10
BS 770 : Part 2
BS 770 : Part 3
BS 770 : Part 4
BS 770 : Part 5
BS 770 : Part 6
BS 770 : Part 7
water-using appliances
Specification for installation of domestic
direct gas-fired tumble dryers of up to 3kW
heat input (2nd and 3rd family gases)
BS EN 160100 Harmonized system of
quality assessment for electronic
components - Sectional specification:
Capability approval of manufacturers of
printed board assemblies of assessed
quality
BS ISO TR 5925-2 Fire tests - Smoke
control door and shutter assemblies - Part 2
: Commentary on test method and test data
application
BS ISO TR 5925-2 Fire tests - Smoke
control door and shutter assemblies - Part 2
: Commentary on test method and test data
application
Butter. Determination of water, solids-notfat and fat contents on the same test portion
(reference method)
Code of practice for selection and
installation of miscellaneous town gas
appliances -- Domestic laundering and
miscellaneous appliances
Methods for chemical analysis of cheese -General introduction
Methods for chemical analysis of cheese -Determination of total solids content
(reference method)
Methods for chemical analysis of cheese -Determination of water content (reference
and routine methods)
Methods for chemical analysis of cheese -Determination of fat content (reference
method)
Methods for chemical analysis of cheese -Determination of chloride content
Methods for chemical analysis of cheese -Determination of pH value
Methods for chemical analysis of cheese -Determination of total phosphorus content.
Molecular absorption spectrometric method
Methods for chemical analysis of cheese -Determination of citric acid content
(reference method)
BS ISO 8229
BS 770 : Part 8
BS 770 : Part 9
BS 6911 : Part 11
BS ISO 2967
BS 2472
BS ISO 3023
BS 2472 : Part 3
BS 1742 : Part 2
BS ISO TR 14697
BS ISO TR 14697
BS EN ISO 1561
BS ISO 6025
BS EN ISO 13000-1
BS EN ISO 13000-2
Operations and baths relating to drycleaning machines. Vocabulary
Methods for chemical analysis of cheese -Determination of nitrogen content
(reference method)
Methods for chemical analysis of cheese -Determination of nitrate and nitrite
contents. Cadmium reduction and
photometry method
BS 6911 : Part 11 Testing earth-moving
machinery - Part 11 : Method for the
determination of volumetric ratings for
hydraulic excavator buckets and backhoe
loader buckets
Cinematography. Magnetic stripes for
sound records on 35 mm motion-picture
film perforated 8 mm Type S-SR (1-3-5-70). Positions and width dimensions
Methods for the chemical analysis of ice
cream
Cinematography. 65 mm and 70 mm
unexposed motion-picture film. Cutting
and perforating dimensions
Methods for chemical analysis of ice cream
-- Determination of fat content
Methods for chemical analysis of
condensed milks -- Determination of total
solids content of sweetened condensed
milks
BS ISO TR 14697 Fire tests - Guidance on
the choice of substrates for building
products
BS ISO TR 14697 Fire tests - Guidance on
the choice of substrates for building
products
BS EN ISO 1561 Dental casting wax
Cinematography. Photographic sound test
films, 35 mm and 16 mm. Specifications
BS EN ISO 13000-1 Plastics Polytetrafluoroethylene (PTFE) semifinished products - Part 1 : Requirements
and designation
BS EN ISO 13000-2 Plastics Polytetrafluoroethylene (PTFE) semifinished products - Part 2 : Preparation of
test specimens and determination of
BS EN ISO 3166-1
BS 7121-11
BS 6249 : Part 1
BS 4401 : Part 1
BS 4401 : Part 11
BS ISO 8395
BS 4401 : Part 12
BS ISO 12103-1
BS 4401 : Part 13
BS 4401 : Part 14
BS 4401 : Part 15
BS 4401 : Part 2
BS 4401 : Part 4
BS 4401 : Part 5
BS 4401 : Part 6
BS ISO 12103-2
BS 4401 : Part 8
properties
BS EN ISO 3166-1 Codes for the
representation of names of countries and
their subdivisions - Part 1 : Country codes
BS 7121-11 Code of practice for Safe use
of cranes - Part 11 : Offshore cranes
Materials and material assemblies used in
clothing for protection against heat and
flame -- Specification for flammability
testing and performance
Methods of test for meat and meat products
-- Determination of ash (reference method)
Methods of test for meat and meat products
-- Detemination of hydroxyproline content
Cinematography. Test films for the
reproduction of 70 mm motion-picture
release prints with magnetic stripes.
Specifications
Methods of test for meat and meat products
-- Determination of starch content of meat
products (reference method)
BS ISO 12103-1 Road vehicles - Test dust
for filter evaluation - Part 1 : Arizona test
dust
Methods of test for meat and meat products
-- Determination of glucono-delta-lactone
content (reference method)
Methods of test for meat and meat products
-- Determination of L-(+)-glutamic acid
content (reference method)
Methods of test for meat and meat products
-- Detection of polyphosphates
Methods of test for meat and meat products
-- Determination of nitrogen content
(reference method)
Methods of test for meat and meat products
-- Determination of total fat content
Methods of test for meat and meat products
-- Determination of free fat content
Methods of test for meat and meat products
-- Determination of chloride (reference
method)
BS ISO 12103-2 Road vehicles - Test dust
for filter evaluation - Part 2 : Aluminium
oxide test dust
Methods of test for meat and meat products
BS 4401 : Part 9
BS 3456 : Part 1
BS 3456 : Part 101
BS 5348 : Part 2
BS 5415 : Part 1
BS ISO 10602
BS 5348 : Part 1
BS 2698
BS EN 60335-2-54
BS ISO 13591
BS EN 60335-2-55
BS 5987
BS EN 60335-2-10
BS 6008
BS 6048
BS 6049 : Part 1
BS ISO 10762
-- Determination of nitrite content
Methods of test for meat and meat products
-- Measurement of pH
Specification for safety of household and
similar electrical appliances -- General
requirements
Specification for safety of household and
similar electrical appliances -- General
requirements
Methods for sampling meat and meat
products -- Preparation of test samples for
microbiological examination
Safety of electrical motor-operated
industrial and commercial cleaning
appliances -- Specification for general
requirements
Photography. Processed silver-gelatin type
black-and-white film. Specifications for
stability
Methods for sampling meat and meat
products -- Taking primary samples
Specification for containers and notes for
filmstrips
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- General purpose cleaning
appliances
BS ISO 13591 Small craft - Portable fuel
systems for outboard motors
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Electrical appliances for
use with aquariums and garden ponds
Methods for sampling tea
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Floor treatment machines
and wet scrubbing machines
Method for preparation of a liquor of tea
for use in sensory tests
Specification for black tea
Methods of test for tea -- Preparation of
ground sample of known dry matter
content
BS ISO 10762 Hydraulic fluid power Cylinder mounting dimensions - 10 MPa
BS 6049 : Part 3
BS 6049 : Part 4
BS 6049 : Part 5
BS 6049 : Part 6
BS 6049 : Part 7
BS 6325
BS 6986 : Part 1
BS EN 60335-2-12
BS 6986 : Part 2
BS 6986 : Part 4
BS 7390
BS 7820 : Part 1
BS 5456
BS 7723 : Part 6
BS 5752 : Part 1
BS 5752 : Part 10
BS 5752 : Part 12
BS 5752 : Part 13
(100 bar) series
Methods of test for tea -- Determination of
water extract
Methods of test for tea -- Determination of
total ash
Methods of test for tea -- Determination of
water-soluble ash and water-insoluble ash
Methods of test for tea -- Determination of
acid-insoluble ash
Determination of alkalinity of watersoluble ash
Glossary of terms relating to black tea
Analysis of instant tea -- Methods of
sampling
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Warming plates and similar
appliances
Analysis of instant tea -- Methods for
determination of free-flow and compacted
bulk densities
Analysis of instant tea -- Method for
determination of total ash
Specification for instant tea
Analysis of tea and tea products -- Tea and
instant tea. Determination of caffeine
content
Glossary of terms relating to coffee and its
products
BS 7723 : Part 6 Methods for calibration of
vertical cylindrical tanks for petroleum and
liquid petroleum products - Part 6 :
Recommendations for monitoring,
checking and verification of tank
calibration and capacity table
Methods of test for coffee and coffee
products -- Green coffee - determination of
moisture content (basic reference method)
Methods of test for coffee and coffee
products -- Instant coffee : size analysis
Methods of test for coffee and coffee
products -- Coffee : determination of
caffeine content (routine method by HPLC)
Methods of test for coffee and coffee
products -- Roasted ground coffee.
Determination of moisture content. Karl
BS 5752 : Part 14
BS ISO 11158
BS 1153
BS 5752 : Part 16
BS 5752 : Part 2
BS 5752 : Part 3
BS 5752 : Part 4
BS ISO 7790
BS 5752 : Part 5
BS 5752 : Part 6
BS 1371
BS 5752 : Part 7
BS EN 60335-2-15
BS ISO 1361
Fischer method (reference method)
Methods of test for coffee and coffee
products -- Roasted ground coffee.
Determination of moisture content (loss in
mass at 103øC (routine method)
BS ISO 11158 Lubricants, industrial oils
and related products (class L) - Family H
(hydraulic systems) - Specifications for
categories HH, HL, HM, HV and HG
Recommendations for processing and
storage of silver-gelatine-type microfilm
Methods of test for coffee and coffee
products -- Green and roasted coffee.
Determination of free-flow bulk density of
whole beans (routine method)
Methods of test for coffee and coffee
products -- Green coffee : determination of
moisture content (routine method)
Methods of test for coffee and coffee
products -- Coffee : determination of
caffeine content (reference method)
Methods of test for coffee and coffee
products -- Green coffee : olfactory and
visual examination and determination of
foreign matter and defects
BS ISO 7790 Hydraulic fluid power - Fourport modular stack valves and four-port
directional control valves, sizes 02, 03 and
0,5 - Clamping dimensions
Methods of test for coffee and coffee
products -- Green coffee : size analysis by
manual sieving
Methods of test for coffee and coffee
products -- Instant coffee : determination of
loss in mass at 70øC under reduced
pressure
Specification for 35 mm and 16 mm
microfilms, spools and reels
Methods of test for coffee and coffee
products -- Green coffee : determination of
loss in mass at 105øC
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Appliances for heating
liquids
BS ISO 1361 Light-gauge metal containers
BS 4189
BS EN 60335-2-23
BS 6371
BS EN 60335-2-25
BS EN ISO 8185
BS ISO 12636
BS EN 60335-2-26
BS EN 60335-2-27
BS 4191
BS EN 60335-2-3
BS 6827
BS EN 60335-2-31
BS EN 60335-2-32
BS EN 60335-2-33
BS 7601
BS ISO/IEC 14474
- Round open-top cans - Internal diameters
Specification for conventional
typographical character for legibility tests
(ISO test character)
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Appliances for skin or hair
care
Recommendations for citation of
unpublished documents
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Microwave ovens
BS EN ISO 8185 Humidifiers for medical
use - General requirements for
humidification systems
BS ISO 12636 Graphic technology Blankets for offset printing
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Clocks
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Ultra-violet and infra-red
radiation skin treatment appliances for
household and similar use
Specification for microform readers
Specification for safety of household and
similar eletrical appliances -- Particular
requirements -- Electric irons
Guide to storage and transport of green
coffee in bags
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Range hoods
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Massage appliances
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Coffee mills and coffee
grinders
Guide to specifying green coffee
BS ISO/IEC 14474 Information technology
- Telecommunications and information
exchange between systems - Private
BS 4210 : Part 1
BS 7683
BS EN 60335-2-47
BS ISO/IEC 14474
BS ISO/IEC 13246
Integrated Services Network - Functional
requirements for static circuit-mode interPINX connections
Specification for 35 mm microcopying of
technical drawings -- Operating procedures
Guide to defects of green coffee
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Commercial electric
boiling pans
BS ISO/IEC 14474 Information technology
- Telecommunications and information
exchange between systems - Private
Integrated Services Network - Functional
requirements for static circuit-mode interPINX connections
BS ISO/IEC 13246 Information technology
- Telecommunications and information
exchange between systems - Broadband
Private Integrated Services Network Inter-exchange signalling protocol Signalling ATM adaptation layer
BS ISO/IEC 13246
BS ISO/IEC 13246 Information technology
- Telecommunications and information
exchange between systems - Broadband
Private Integrated Services Network Inter-exchange signalling protocol Signalling ATM adaptation layer
BS ISO/IEC 15772
BS ISO/IEC 15772 Information technology
- Telecommunications and information
exchange between systems - Private
Integrated Services Network - Interexchange signalling protocol - Common
information additional network feature
BS ISO/IEC 13247 Information technology
- Telecommunications and information
exchange between systems - Broadband
Private Integrated Services Network Inter-exchange signalling protocol - Basic
call/connection control
BS ISO/IEC 13247 Information technology
- Telecommunications and information
exchange between systems - Broadband
Private Integrated Services Network -
BS ISO/IEC 13247
BS ISO/IEC 13247
BS EN 60335-2-45
BS 4210 : Part 3
BS EN 60335-2-48
BS EN 60335-2-49
BS 6117
BS EN 60335-2-50
BS EN 60335-2-51
BS EN 60335-2-52
BS EN 60335-2-54
BS EN 60335-2-56
BS 6118
BS EN ISO 6800
Inter-exchange signalling protocol - Basic
call/connection control
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Portable electric heating
tools and similar appliances
Specification for 35 mm microcopying of
technical drawings -- Unitized microfilm
carriers
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Commercial electric
grillers and toasters
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Commercial catering
electric hot cupboards
Specification for glass bottles for light
wine
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Commercial electric bainsmarie
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Stationary circulation
pumps for heating and service water
installations
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Oral hygiene appliances
connected to the mains supply though a
safety isolating transformer
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- General purpose cleaning
appliances
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Projectors and similar
appliances
Specification for multi-trip glass bottles for
beer and cider
BS EN ISO 6800 Animal and vegetable
fats and oils - Determination of the
composition of fatty acids in the 2-position
BS EN 60335-2-55
BS EN 60335-2-57
BS EN 60335-2-59
BS 4657
BS EN 60335-2-60
BS EN 60335-2-63
BS ISO 5350-3
BS ISO 11480
BS EN 60335-2-64
BS 6119 : Part 1
BS 6367
BS 5444
BS 7488
BS 5513
BS 5525
of the triglyceride molecules
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Electrical appliances for
use with aquariums and garden ponds
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Ice-cream appliances with
incorporated motor-compressors
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Insect killers
Method for determining the resolution
obtained in microcopying
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Whirlpool baths and
similar equipment
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Commercial electric water
boilers and liquid heaters
BS ISO 5350-3 Pulps - Estimation of dirt
and shives - Part 3 : Inspection by reflected
light
BS ISO 11480 Pulp, paper and board Determination of total chlorine and
organically bound chlorine
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Commercial electric
kitchen machines
Glass bottles for carbonated soft drinks -Specification for 750 ml and 1 litre multitrip bottles
Code of practice for drainage of roofs and
paved areas
Recommendations for preparation of copy
for microcopying
Recommendations for handling glass
bottles, containing carbonated soft drinks
or carbonated water, in filling plants,
warehouses, and retailers' premises
Specification for 35 mm microcopying of
newspaper cuttings on A6 microfiche
Specification for 35 mm microcopying of
BS EN 1131
BS 5536
BS EN 1132
BS 5632
BS 5956
BS 1309
BS EN 1133
BS 6054 : Part 3
BS EN 60335-2-8
BS EN 60335-2-9
BS EN 1134
BS 6054 : Part 4
BS EN 1135
BS 6054 : Part 5
BS EN 1136
BS EN 1137
BS EN 1138
BS EN 60704-1
maps and plans
Method for determination of the relative
density of fruit and vegetable juices
Recommendations for preparation of
technical drawings for microfilming
Method determination of the pH-value of
fruit and vegetable juices
Specification for microfilm jackets. A6 size
Specification for A6-size microfiche for the
motor industry
Methods of Sampling and chemical testing
of leather
Method for determination of formol
number of fruit and vegetable juices
Glossary of terms for micrographics -Film processing
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Electric shavers, hair
clippers and similar appliances
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Toasters, grills, roasters
and similar appliances
Method for determination of sodium,
potassium, calcium and magnesium
contents of fruit and vegetable juices by
atomic absorption spectrometry
Glossary of terms for micrographics -Materials and packaging
Fruit and vegetable juices. Method for
determination of ash
Glossary of terms for micrographics -Quality of images, legibility, inspection
Method for determination of phosphorus
content of fruit and vegetable juices :
spectrometric method
Method for determination of citric acid
(citrate) content of fruit and vegetable
juices : NADH spectrometric method
Method for enzymatic determination of Lmalic acid (L-malate) content of fruit and
vegetable juices. NADH spectrometric
method
Test code for the determination of airborne
acoustical noise emitted by household and
BS EN 1139
BS EN 60953-2
BS EN 1140
BS EN 60704-2-1
BS EN 1141
BS EN 60704-2-2
BS 6247
BS EN 1142
BS EN 60704-2-3
BS 6313
BS 3456 : Part 1
BS 6342
BS 3456 : Part 101
BS EN 60704-2-4
similar electrical appliances -- General
requirements
Method for determination of D-isocitric
acid content of fruit and vegetable juices.
NADPH spectrometric method
BS EN 60953-2 Rules for steam turbine
thermal acceptance tests - Part 2 : Method
B : Wide range of accuracy for various
types and sizes of turbines
Method for determination of D-glucose and
D-fructose content of NADPH
spectrometric method
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Vacuum cleaners
Method for determination of proline
content in fruit and vegetable juices :
spectrometric method
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Forced draught convection
heaters
Method of test for adhesion of aperturecard protection sheets
Method for determination of sulfate content
of fruit and vegetable juices
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Particular requirements for
dishwashers
Specification for 35 mm microcopying of
serials
Specification for safety of household and
similar electrical appliances -- General
requirements
Specification for 105 mm microcopying of
technical drawings (single image, A6 size)
Specification for safety of household and
similar electrical appliances -- General
requirements
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
BS EN 60704-2-5
BS EN 60704-2-6
BS EN 60704-3
BS 3456 : Part 102 : Section 102.21
BS 3456 : Part 102 : Section 102.342
BS 3456 : Part 102 : Section 102.71
BS 6354
BS EN 60947-7-1
BS EN 60730-2-7
BS 3456 : Part 2 : Section 2.21
BS 3456 : Part 2 : Section 2.22
requirements -- Washing machines and
spin extractors
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Room heaters of the
storage type
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Tumble-dryers
Test code for the determination of airborne
acoustical noise emitted by household and
similar electrical appliances -- Particular
requirements -- Procedure for determining
and verifying declared noise emission
values
Specification for safety of household and
similar electrical appliances -- Particular
requirements -- Storage water heaters
Specification for safety of household and
similar electrical appliances Particular
requirements Electric fans and regulators
Specification for safety of household and
similar electrical appliances Particular
requirements Dispensing appliances for
food, drink and packaged consumer
products
Method for measuring the screen
luminance, contrast and reflectance of
microform readers
BS EN 60947-7-1 Specification for Lowvoltage switchgear and controlgear - Part 7
: Ancillary equipment - Section 1 :
Terminal blocks for copper conductors
BS EN 60730-2-7 Specification for
Automatic electrical controls for household
and similar use - Part 2 : Particular
requirements - Section 2.7 : Timers and
time switches
Specification for safety of household and
similar electrical appliances Particular
requirements Electric immersion heaters
Specification for safety of household and
similar electrical appliances Particular
requirements Electricaire heaters
BS 3456 : Part 2 : Section 2.26
BS 3456 : Part 2 : Section 2.32
BS 3456 : Part 2 : Section 2.42
BS 3456 : Part 202 : Section 202.11
BS 3456 : Part 202 : Section 202.139
BS 6359
BS 3456 : Part 202 : Section 202.14
BS 3456 : Part 202 : Section 202.16
BS 3456 : Part 202 : Section 202.19
BS 3456 : Part 202 : Section 202.2
BS 3456 : Part 202 : Section 202.20
BS 6498
BS EN 60730-2-7
Specification for safety of household and
similar electrical appliances Particular
requirements Thermal-storage electric
room heaters
Specification for safety of household and
similar electrical appliances Particular
requirements Mains-operated electric
lawnmowers
Specification for safety of household and
similar electrical appliances Particular
requirements Battery-operated lawnmowers
Specification for safety of household and
similar electrical appliances Particular
requirements Tumbler dryers
Specification for safety of household and
similar electrical appliances Particular
requirements Room humidifiers
Specification for dimensions and position
of microfiche heading coating (colour
stripe)
Specification for safety of household and
similar electrical appliances Particular
requirements Electric kitchen machines
Specification for safety of household and
similar electrical appliances Particular
requirements Food waste disposers
Specification for safety of household and
similar electrical appliances Particular
requirements Battery-powered shavers, hair
clippers and similar appliances and their
charging and battery assemblies
Specification for safety of household and
similar electrical appliances Particular
requirements Vacuum cleaners and water
suction cleaning appliances
Specification for safety of household and
similar electrical appliances Particular
requirements Battery-powered toothbrushes and their charging and battery
assemblies
Guide to preparation of microfilm and
other microforms that may be required as
evidence
BS EN 60730-2-7 Specification for
Automatic electrical controls for household
and similar use - Part 2 : Particular
BS 3456 : Part 202 : Section 202.36
BS 3456 : Part 202 : Section 202.37
BS 3456 : Part 202 : Section 202.38
BS 3456 : Part 202 : Section 202.39
BS 3456 : Part 202 : Section 202.4
BS 3456 : Part 202 : Section 202.42
BS 3456 : Part 202 : Section 202.43
BS 3456 : Part 202 : Section 202.7
BS 6660
BS 6872
BS 3456 : Part 202 : Section 202.46
requirements - Section 2.7 : Timers and
time switches
Specification for safety of household and
similar electrical appliances Particular
requirements Commercial electric ranges,
ovens and hob elements
Specification for safety of household and
similar electrical appliances Particular
requirements Commercial electric deep fat
fryers
Specification for safety of household and
similar electrical appliances Particular
requirements Commercial electric griddles
and griddle grills
Specification for safety of household and
similar electrical appliances Particular
requirements Specification for safety of
household and similar electrical appliances.
Particular requirements. Commercial
electric multi-purpose cooking pans
Specification for safety of household and
similar electrical appliances Particular
requirements Specification for safety of
household and similar electrical appliances.
Particular requirements. Spin extractors
Specification for safety of household and
similar electrical appliances Particular
requirements Commercial electric forced
convection ovens
Specification for safety of household and
similar electrical appliances Particular
requirements Specification for safety of
household and similar electrical appliances.
Particular requirements. Clothes dryers and
towel rails
Specification for safety of household and
similar electrical appliances Particular
requirements Washing machines
Guide to setting up and maintaining
micrographics units
Specification for visual densities of diazo
and vesicular second-generation micro
forms
Specification for safety of household and
similar electrical appliances Particular
requirements Specification for safety of
BS 3456 : Part 3 : Section 3.21
BS ISO 11667
BS 3999 : Part 1
BS 3999 : Part 12
BS 3999 : Part 16
BS 3999 : Part 17
BS 3999 : Part 4
BS 3999 : Part 7
BS 3999 : Part 8
BS 3999 : Part 9
BS 5406 : Part 1
BS 5406 : Part 3
household and similar electrical appliances.
Particular requirements. Commercial
electric steam cookers
Specification for safety of household and
similar electrical appliances Complete
particular specifications Portable
immersion heaters
BS ISO 11667 Fibre reinforced plastics Moulding compounds and prepregs Determination of resin, reinforcement-fibre
and mineral-filler content - Dissolution
methods
Methods of measuring the performance of
household electrical appliances -- Electric
kettles and jugs
Methods of measuring the performance of
household electrical appliances -- Vacuum
cleaners
Methods of measuring the performance of
household electrical appliances -- Electric
warming plates
Methods of measuring the performance of
household electrical appliances -- Handheld mains voltage operated spray guns
Methods of measuring the performance of
household electrical appliances -- Electric
clothes drying cabinets and racks
Methods of measuring the performance of
household electrical appliances -- Electric
irons
Methods of measuring the performance of
household electrical appliances -- Coffee
makers
Methods of measuring the performance of
household electrical appliances -- Electric
toasters
Disturbances in supply systems caused by
household appliances and similar electrical
equipment -- Disturbances in supply
systems caused by household appliances
and similar electrical equipment. Glossary
of terms
Disturbances in supply systems caused by
household appliances and similar electrical
equipment -- Specification of voltage
fluctuations
BS 7338: Part 1
BS 7353
BS 7555
DD 199
BS ISO 3272-2
BS ISO 3272-4
BS ISO 4087
BS ISO 6196-7
BS ISO 6196-1
BS ISO 6198
BS ISO 6199
BS ISO 6200
BS ISO 6342
BS 743
BS 1494 : Part 1
BS 1777
BS ISO 7565
BS ISO 8514-1
BS ISO 8514-2
Microfilm jackets -- Specification for fivechannel jacket for 16 mm microfilm
Methods of measuring quality of output of
graphic COM recorders
Guide to miniaturization of medical
diagnostic images on film
Legal admissibility of microforms (ISO/TR
10200)
Microfilming of technical drawings and
other drawing office documents -- Quality
criteria and control of 35 mm silver gelatin
microfilms
Microfilming of technical drawings and
other drawing office documents -Microfilming of drawings of special and
exceptional elongated sizes
Micrographics. Microfilming of
newspapers for archival purposes on 35
mm microfilm
Micrographics. Vocabulary -- Computer
micrographics
Micrographics. Vocabulary -- General
terms
Micrographics. Readers for transparent
microforms. Performance characteristics
Micrographics. Microfilming of documents
on 16 nun and 35 mm silver-gelatin type
microfilm. Operating procedures
Micrographics. First generation silvergelatin microforms of source documents.
Density specifications
Micrographics. Aperture cards. Method of
measuring thickness of buildup area
Specification for materials for damp-proof
courses
Specification for fixing accessories for
building purposes -- Fixings for sheet, roof
and wall coverings
Specification for glass honey jars
Micrographics. Readers for transparent
microforms, Measurement of
characteristics
Micrographics. Alphanumeric computer
output microforms. Quality control -Characteristics of the test slide and test data
Micrographics. Alphanumeric computer
BS EN ISO 1741
BS EN ISO 1666
BS ISO 9923
BS 6100 : Part 1 : Section 1.4 : Subsection
1.4.1
BS ISO 10197
BS ISO 10198
BS ISO 10550
BS ISO 5025
DD ENV 12875-1
BS EN 2484
BS EN 2499
BS EN 2547
BS EN ISO 3593
BS EN 2575
BS 4277
BS 5261 : Part 1
BS ISO 10758
BS EN 1185
BS 5261 : Part 2
output microforms. Quality control -Method
Dextrose. Determination of loss in mass on
drying. Vacuum oven method
Starch. Determination of moisture content.
Oven-drying methods
Micrographics. Transparent A6 microfiche.
Image arrangements
Glossary of building and civil engineering
terms -- General and miscellaneous -Materials -- Glazing
Micrographics. Reader-printers for
transparent microforms. Characteristics
Micrographics. Rotary camera for 16 mm
microfilm. Mechanical and optical
characteristics
Micrographics. Planetary camera systems.
Test target for checking performance
BS ISO 5025 Reinforcement products Woven fabrics - Determination of width
and length
DD ENV 12875-1 Mechanical dishwashing
resistance of domestic utensils - Part 1 :
Reference test method
Specification for microfilming of drawings.
Aperture card for 35 mm microfilm
Specification for computer output
microfiche (com) A6 microfiche
Specification for filming of documents.
Microfilm 105 mm (Microfiche A6)
Starch. Determination of ash
Specification for filming of documents. 16
mm microfilm
Glossary of terms used in offset
lithographic printing
Copy preparation and proof correction -Recommendations for preparation of
typescript copy for printing
Graphic technology. Prepress digital data
exchange. Online transfer from electronic
prepress systems to colour hardcopy
devices
Starches and derived products.
Determination of sulfur dioxide content.
Acidimetric method
Copy preparation and proof correction --
BS 5261 : Part 3
DD ENV 12875-1
BS EN ISO 10253
BS ISO 10889-6
BS ISO 10889-7
BS ISO 10889-8
BS ISO 10889-5
BS EN 61603-3
BS 6100 : Part 6 : Section 6.6 : Subsection
6.6.1
BS 6100 : Part 6 : Section 6.6 : Subsection
6.6.2
BS EN 60679-4
BS EN 60679-1
BS 684 : Part 0 : Section 0.1
Specification for typographic requirements,
marks for copy preparation and proof
correction, proofing procedure
Copy preparation and proof correction -Specification for marks for mathematical
copy preparation and mathematical proof
correction and their uses
DD ENV 12875-1 Mechanical dishwashing
resistance of domestic utensils - Part 1 :
Reference test method
BS EN ISO 10253 Water quality - Marine
algal growth inhibition test with
Skeletonema costatum and Phaeodactylum
tricornutum
BS ISO 10889-6 Tool holders with
cylindrical shank - Part 6 : Type E with
cylindrical seat
BS ISO 10889-7 Tool holders with
cylindrical shank - Part 7 : Type F with
taper seat
BS ISO 10889-8 Tool holders with
cylindrical shank - Part 8 : Type Z,
accessories
BS ISO 10889-5 Tool holders with
cylindrical shank - Part 5 : Type D with
more than one rectangular seat
BS EN 61603-3 Transmission of audio
and/or video and related signals using
infra-red radiation - Part 3 : Transmission
systems for audio signals for conference
and similar systems
Glossary of building and civil engineering
terms -- Concrete and plaster -- Products,
applications and operations -- Concrete and
mortar
Glossary of building and civil engineering
terms -- Concrete and plaster -- Products,
applications and operations -- Plaster
BS EN 60679-4 Quartz crystal controlled
oscillators of assessed quality - Part 4 :
Sectional specification - Capability
approval
BS EN 60679-1 Quartz crystal controlled
oscillators of assessed quality - Part 1 :
Generic specification
Methods of analysis of fats and fatty oils --
BS 684 : Part 1 : Section 1.1
BS 684 : Part 1 : Section 1.10
BS 684 : Part 1 : Section 1.11
BS 684 : Part 1 : Section 1.12
BS EN 60315-4
BS EN 61830
BS EN 166100
BS EN 60512-14-7
BS EN 61305-2
BS EN 60603-13
BS EN 60603-12
General introduction -- General procedures
and list of determinations in BS 684
Methods of analysis of fats and fatty oils -Physical methods -- Determination of litre
weight in air
Methods of analysis of fats and fatty oils -Physical methods -- Determination of
moisture and other volatile matter
Methods of analysis of fats and fatty oils -Physical methods -- Determination of
penetration value
Methods of analysis of fats and fatty oils -Physical methods -- Determination of
dilatation
BS EN 60315-4 Methods of measurement
on radio receivers for various classes of
emission - Part 4 : Receivers for frequencymodulated sound broadcasting emissions
BS EN 61830 Microwave ferrite
components - Measuring methods for
major properties
BS EN 166100 Harmonized system of
quality assessment for electronic
components - Sectional specification:
Surface acoustic wave (SAW) filters
BS EN 60512-14-7 Electromechanical
components for electronic equipment Basic testing procedures and measuring
methods - Part 14 : Sealing tests - Section 7
: Test 14g : Impacting water
BS EN 61305-2 Household high-fidelity
audio equipment and systems - Methods of
measuring and specifying the performance
- Part 2 : FM radio tuners
BS EN 60603-13 Connectors for
frequencies below 3 MHz for use with
printed boards - Part 13 : Detail
specification for two-part connectors of
assessed quality, for printed boards for
basic grid of 2,54 mm (0,1 in) with free
connectors for non-accessible i
BS EN 60603-12 Connectors for
frequencies below 3 MHz for use with
printed boards - Part 12 : Detail
specification for dimensions, general
requirements and tests for a range of
BS EN 60603-9
BS EN 60603-3
BS 684 : Part 1 : Section 1.13
BS EN 60603-8
BS EN 60603-6
BS 684 : Part 1 : Section 1.14
BS 2913
BS 684 : Part 1 : Section 1.15
BS 684 : Part 1 : Section 1.16
BS EN 60603-5
BS 684 : Part 1 : Section 1.2
sockets designed for use with integrated
circuits
BS EN 60603-9 Connectors for frequencies
below 3 MHz for use with printed boards Part 9 : Two-part connectors for printed
boards, backpanels and cable connectors,
basic grid of 2,54 mm (0,1 in)
BS EN 60603-3 Connectors for frequencies
below 3 MHz for use with printed boards Part 3 : Two-part connectors for printed
boards having contacts spaced at 2,54 mm
(0,100 in) centres and staggered
terminations at that same spacing
Methods of analysis of fats and fatty oils -Physical methods -- Determination of
cooling curve
BS EN 60603-8 Connectors for frequencies
below 3 MHz for use with printed boards Part 8 : Two-part connectors for printed
boards for basic grid of 2,54 mm (0,1 in)
with square male contacts of 0,63 mm x
0,63 mm
BS EN 60603-6 Connectors for frequencies
below 3 MHz for use with printed boards Part 6 : Edge-socket connectors and printed
board connectors with 2,54 mm (0,1 in)
contact spacing for single or double-sided
printed boards of 1,6 mm (0,063 in)
nominal th
Methods of analysis of fats and fatty oils -Physical methods -- Determination of
colour
Methods for the measurement of offset
blanket thickness for lithographic printing
Methods of analysis of fats and fatty oils -Physical methods -- Determination of
ultraviolet absorbance
Methods of analysis of fats and fatty oils -Physical methods -- Determination of water
content : entrainment method
BS EN 60603-5 Connectors for frequencies
below 3 MHz for use with printed boards Part 5 : Edge-socket connectors and twopart connectors for double-sided printed
boards with 2,54 mm (0,1 in) spacing
Methods of analysis of fats and fatty oils --
BS 684 : Part 1 : Section 1.3
BS 6463 : Part 2
BS 684 : Part 1 : Section 1.4
BS 6463 : Part 3
BS 684 : Part 1 : Section 1.5
BS 684 : Part 1 : Section 1.6
BS 684 : Part 1 : Section 1.7
BS 684 : Part 1 : Section 1.8
BS 684 : Part 1 : Section 1.9
BS EN 60603-4
BS EN 60286-2
BS 684 : Part 2 : Section 2.1
BS 684 : Part 2 : Section 2.10
BS 684 : Part 2 : Section 2.11
Physical methods -- Determination of
refractive index
Methods of analysis of fats and fatty oils -Physical methods -- Determination of
melting point (slip point)
Quicklime, hydrated lime and natural
calcium carbonate -- Methods of chemical
analysis
Methods of analysis of fats and fatty oils -Physical methods -- Determination of flow
and drop points
Quicklime, hydrated lime and natural
calcium carbonate -- Methods of test for
physical properties of quicklime
Methods of analysis of fats and fatty oils -Physical methods -- Determination of cloud
point
Methods of analysis of fats and fatty oils -Physical methods -- Determination of titre
Methods of analysis of fats and fatty oils -Physical methods -- Determination of
surface-drying time
Methods of analysis of fats and fatty oils -Physical methods -- Determination of
smoke point
Methods of analysis of fats and fatty oils -Physical methods -- Determination of
water-insoluble solvents
BS EN 60603-4 Connectors for frequencies
below 3 MHz for use with printed boards Part 4 : Two-part connectors for printed
boards having contacts spaced at 1,91 mm
(0,075 in) centres and staggered
terminations at that same spacing
BS EN 60286-2 Packaging of components
for automatic handling - Part 2 : Tape
packaging of components with
unidirectional leads on continuous tapes
Methods of analysis of fats and fatty oils -Other methods -- Determination of water
by the Karl Fischer method
Methods of analysis of fats and fatty oils -Other methods -- Determination of acidity
Methods of analysis of fats and fatty oils -Other methods -- Determination of volatile
acids (Reichert, Polenske and Kirschner
BS 684 : Part 2 : Section 2.12
BS 684 : Part 2 : Section 2.13
BS 684 : Part 2 : Section 2.14
BS 684 : Part 2 : Section 2.15
BS 684 : Part 2 : Section 2.16
BS EN 60286-2
BS 684 : Part 2 : Section 2.17
BS 684 : Part 2 : Section 2.18
BS EN 60286-3
BS 684 : Part 2 : Section 2.2
BS 684 : Part 2 : Section 2.20
BS 4588
BS 684 : Part 2 : Section 2.21
BS EN 60286-3
BS EN 60286-4
values)
Methods of analysis of fats and fatty oils -Other methods -- Determination of
oxidized fatty acids
Methods of analysis of fats and fatty oils -Other methods -- Determination of iodine
value
Methods of analysis of fats and fatty oils -Other methods -- Determination of
peroxide value
Methods of analysis of fats and fatty oils -Other methods -- Calculation of total
saponifiable matter
Methods of analysis of fats and fatty oils -Other methods -- Determination of coppercalorimetric method
BS EN 60286-2 Packaging of components
for automatic handling - Part 2 : Tape
packaging of components with
unidirectional leads on continuous tapes
Methods of analysis of fats and fatty oils -Other methods -- Determination of ironcalorimetric method
Methods of analysis of fats and fatty oils -Other methods -- Determination of copper,
iron and nickel content. Graphite furnace
atomic absorption method
BS EN 60286-3 Packaging of components
for automatic handling - Part 3 : Packaging
of leadless components on continuous tapes
Methods of analysis of fats and fatty oils -Other methods -- Determination of ash
Methods of analysis of fats and fatty oils -Other methods -- Determination of
carotene in vegetable oils
Methods of test for determining the
registration obtained on duplicating
machines
Methods of analysis of fats and fatty oils -Other methods -- Determination of lead
content. Graphite furnace atomic
absorption method
BS EN 60286-3 Packaging of components
for automatic handling - Part 3 : Packaging
of leadless components on continuous tapes
BS EN 60286-4 Packaging of components
BS 684 : Part 2 : Section 2.24
BS 684 : Part 2 : Section 2.26
BS 684 : Part 2 : Section 2.27
BS 5479 : Part 3
BS 684 : Part 2 : Section 2.29
BS 5479 : Part 4
BS 684 : Part 2 : Section 2.32
BS 684 : Part 2 : Section 2.33
BS 5479 : Part 1
BS 684 : Part 2 : Section 2.34
BS 684 : Part 2 : Section 2.37
BS 684 : Part 2 : Section 2.36
BS 684 : Part 2 : Section 2.38
BS 684 : Part 2 : Section 2.39
for automatic handling - Part 4 : Stick
magazines for electronic components
encapsulated in packages of form E and G
Methods of analysis of fats and fatty oils -Other methods -- Determination of
anisidine value
Methods of analysis of fats and fatty oils -Other methods -- Determination of
polyethylene-type plastics
Methods of analysis of fats and fatty oils -Other methods -- Determination of
bleachability
Duplicators and document copying
machines -- Glossary of terms for
duplicators
Methods of analysis of fats and fatty oils -Other methods -- Cottonseed oil test
(Halphen)
Duplicators and document copying
machines -- Glossary of terms for
document copying machines
Methods of analysis of fats and fatty oils -Other methods -- Determination of
rancidity index
Methods of analysis of fats and fatty oils -Other methods -- Detection and
identification of antioxidants
Duplicators and document copying
machines -- Attachment features of plates
of offset duplicators
Methods of analysis of fats and fatty oils -Other methods -- Preparation of methyl
esters of fatty acids
Methods of analysis of fats and fatty oils -Other methods -- Determination of residual
technical hexane content
Methods of analysis of fats and fatty oils -Other methods -- Determination of
butylhydroxyanisole (BHA) and
butylhydroxytoluene (BHT)
Methods of analysis of fats and fatty oils -Other methods -- Determination of the
proportions of individual sterols in the
sterol fraction
Methods of analysis of fats and fatty oils -Other methods -- Determination of the
BS 684 : Part 2 : Section 2.4
BS 684 : Part 2 : Section 2.42
BS 684 : Part 2 : Section 2.43
BS 684 : Part 2 : Section 2.44
BS 684 : Part 2 : Section 2.5
BS 684 : Part 2 : Section 2.6
BS 684 : Part 2 : Section 2.7
BS 684 : Part 2 : Section 2.8
BS 3488
BS EN 60286-4
BS ISO 10889-4
BS ISO 9336-2
BS 3919
BS 7207
BS ISO 10889-3
BS EN ISO 661
BS EN ISO 663
composition of fatty acids in the 2-position
Methods of analysis of fats and fatty oils -Other methods -- Calculation of total fatty
matter
Methods of analysis of fats and fatty oils -Other methods -- Determination of 1monoglycerides and free glycerol contents
Methods of analysis of fats and fatty oils -Other methods -- Determination of
polyunsaturated fatty acids with a cis,cis
1,4-diene structure
Methods of analysis of fats and fatty oils -Other methods -- Determination of gallates
Methods of analysis of fats and fatty oils -Other methods -- Determination of
alkalinity
Methods of analysis of fats and fatty oils -Other methods -- Determination of
saponification value
Methods of analysis of fats and fatty oils -Other methods -- Determination of
unsaponifiable matter
Methods of analysis of fats and fatty oils -Other methods -- Determination of total
neutral oil
Specification for technical anhydrous
lanolin
BS EN 60286-4 Packaging of components
for automatic handling - Part 4 : Stick
magazines for electronic components
encapsulated in packages of form E and G
BS ISO 10889-4 Tool holders with
cylindrical shank - Part 4 : Type C with
rectangular axial seat
Optics and optical instruments.
Application. Optical transfer function. -Lenses for office copiers
Specification for technical tallow and
animal grease
Specification for crude vegetable fats
BS ISO 10889-3 Tool holders with
cylindrical shank - Part 3 : Type B with
rectangular radial seat
Animal and vegetable fats and oils.
Preparation of test sample
Animal and vegetable fats and oils.
BS 5835 : Part 1
BS 6100 : Part 5 : Section 5.1
BS 6100 : Part 5 : Section 5.2
BS ISO 10889-2
BS ISO 10889-1
BS ISO 230-2
BS ISO 7026
BS ISO 4037-2
BS ISO 13296
BS ISO 7879
BS ISO 199
BS EN 61847
BS EN ISO 13819-1
BS 6100 : Part 5 : Section 5.3
Determination of insoluble impurities
content
Recommendations for testing of aggregates
-- Compactibility test for graded aggregates
Glossary of building and civil engineering
terms -- Masonry -- Terms common to
masonry
Glossary of building and civil engineering
terms -- Masonry -- Stone
BS ISO 10889-2 Tool holders with
cylindrical shank - Part 2 : Type A, shanks
for tool holders of special designs
BS ISO 10889-1 Tool holders with
cylindrical shank - Part 1 : Cylindrical
shank, location bore - Technical delivery
conditions
BS ISO 230-2 Test code for machine tools
- Part 2 : Determination of accuracy and
repeatability of positioning of numerically
controlled machine tool axes
BS ISO 7026 Diesel engines - Screw-in
injection nozzle holders, types 20, 21, 21.1
and 27 for pintle nozzle size `S1' type `B'
BS ISO 4037-2 X and gamma reference
radiation for calibrating dosemeters and
doserate meters and for determining their
response as a function of photon energy Part 2 : Dosimetry for radiation protection
over the energy ranges 8 keV to 1,3 MeV
and 4 MeV
BS ISO 13296 Diesel engines - High
pressure fuel injection pipe assemblies General requirements and dimensions
BS ISO 7879 Diesel engines - Cradle
mounted in-line fuel injection pumps Mounting dimensions
BS ISO 199 Rolling bearings - Thrust
bearings - Tolerances
BS EN 61847 Ultrasonics - Surgical
systems - Measurement and declaration of
the basic output characteristics
BS EN ISO 13819-1 Petroleum and natural
gas industries - Offshore structures - Part 1
: General requirements
Glossary of building and civil engineering
terms -- Masonry -- Bricks and blocks
BS 6100 : Part 6 : Section 6.1
BS 6100 : Part 6 : Section 6.2
BS 6100 : Part 6 : Section 6.3
BS 6100 : Part 6 : Section 6.4
BS 6100 : Part 6 : Section 6.5
BS 5479 : Part 2
BS 4289 : Part 10
BS 5960
BS ISO 11093-7
BS ISO 11093-8
BS EN ISO 13397-4
BS X 35
BS EN 61284
BS 6050
BS 4289 : Part 4
BS EN 60870-6-802
Glossary of building and civil engineering
terms -- Concrete and plaster -- Binders
Glossary of building and civil engineering
terms -- Concrete and plaster -- Concrete
Glossary of building and civil engineering
terms -- Concrete and plaster -- Aggregates
Glossary of building and civil engineering
terms -- Concrete and plaster -- Admixtures
Glossary of building and civil engineering
terms -- Concrete and plaster -- Formwork
Duplicators and document copying
machines -- Minimum overprint and
attachment features of stencils for
duplicators
Methods for analysis of oilseeds -Determination of chlorophyll content of
rapeseed
Specification for minimum information to
be included in specification sheets of
duplicators
BS ISO 11093-7 Paper and board - Testing
of cores - Part 7 : Determination of flexural
modulus by the three-point method
BS ISO 11093-8 Paper and board - Testing
of cores - Part 8 : Determination of natural
frequency and flexural modulus by
experimental modal analysis
BS EN ISO 13397-4 Periodontal curettes,
dental scalers and excavators - Part 4 :
Dental excavators - Discoid type
BS X 35 Specification for Selectively
removable intermediate coating for
aerospace purposes
BS EN 61284 Overhead lines Requirements and tests for fittings
Specification for minimum information to
be included in specification sheets of
document copying machines
Methods for analysis of oilseeds -Determination of hexane extract (or light
petroleum extract) called 'oil content'
BS EN 60870-6-802 Telecontrol
equipment and systems - Part 6-802 :
Telecontrol protocols compatible with ISO
Standards and ITU-T recommendations TASE.2 Object models
BS EN 60870-6-503
BS ISO 14808
BS 684-2.46
BS 4289 : Part 5
BS 4289 : Part 8
BS 1411
BS 8204 : Part 4
BS 3110
BS 4325 : Part 1
BS 4325 : Part 2
BS 4325 : Part 4
BS ISO 10756
BS 4325 : Part 5
BS EN ISO 11593
BS 4325 : Part 6
BS 4325 : Part 7
BS 4325 : Part 8
BS EN 60870-6-503 Telecontrol
equipment and systems - Part 6-503 :
Telecontrol protocols compatible with ISO
Standards and ITU-T recommendations TASE.2 Services and protocol
BS ISO 14808 Photography - Composition
of 135-film canisters
BS 684-2.46 Methods of analysis of fats
and fatty oils - Part 2 : Other methods Section 2.46 : Determination of
tocopherols and tocotrienols contents
Methods for analysis of oilseeds -Determination of acidity of fat
Methods for analysis of oilseeds -- Check
of the calibration of moisture meters
Specification for printers' cards and blanks
(terms and sizes)
Screeds, bases and in-situ floorings -- Code
of practice for terrazzo wearing surfaces
Methods for measuring the rub resistance
of print
Methods for analysis of oilseed residues -Determination of moisture and volatile
matter content
Methods for analysis of oilseed residues -Determination of total ash
Methods for analysis of oilseed residues -Determination of hexane extract (or light
petroleum extract), called 'oil content'
Graphic technology. Prepress digital data
exchange. Colour line art data on magnetic
tape
Methods for analysis of oilseed residues -Determination of diethyl ether extract
BS EN ISO 11593 Manipulating industrial
robots - Automatic end effector systems Vocabulary and presentation of
characteristics
Methods for analysis of oilseed residues -Determination of urease activity of soya
bean products
Methods for analysis of oilseed residues -Determination of cresol red index in soya
bean products
Methods for analysis of oilseed residues -Determination of total isothiocyanate
BS 4325 : Part 9
BS ISO 10759
BS 6606
BS EN 295-4
BS EN 295-5
BS EN ISO 11593
BS ISO 6196-3
BS EN 490
BS ISO 6196-3
BS ISO 9897
BS ISO 9897
BS ISO 4834
BS IEC 61000-3-8
BS 3148
3F 69
BS EN ISO 658
content and vinylthiooxazolidone content
Methods for analysis of oilseed residues -Preparation of test samples
Graphic technology. Prepress digital data
exchange. Monochrome image data on
magnetic tape
Methods for sampling oilseed residues
Vitrified clay pipes and fittings and pipe
joints for drains and sewers -Requirements for special fittings, adaptors
and compatible accessories
Vitrified clay pipes and fittings and pipe
joints for drains and sewers -Requirements for perforated vitrified clay
pipes and fittings
BS EN ISO 11593 Manipulating industrial
robots - Automatic end effector systems Vocabulary and presentation of
characteristics
BS ISO 6196-3 Micrographics Vocabulary - Part 3 : Film processing
Concrete roofing tiles and fittings. Product
specifications
BS ISO 6196-3 Micrographics Vocabulary - Part 3 : Film processing
BS ISO 9897 Freight containers Container equipment data exchange
(CEDEX) - General communication codes
BS ISO 9897 Freight containers Container equipment data exchange
(CEDEX) - General communication codes
BS ISO 4834 Cinematography - Magnetic
sound test films excluding striped release
prints - Basic technical characteristics
BS IEC 61000-3-8 Electromagnetic
Compatibility (EMC) - Part 3-8 : Limits Guide to signalling on low-voltage
electrical installations - emission levels,
frequency bands and electromagnetic
disturbance levels
Methods of test for water for making
concrete (including notes on the suitability
of the water)
BS 3F 69 Specification for Packaging and
identification of vulcanized rubber items
Oilseeds. Determination of impurities
BS EN ISO 664
BS ISO 10897
BS ISO 188
BS EN 12256
BS ISO 8032
HC 104
BS ISO 6133
BS ISO 6133
BS EN 186260
BS EN 60534-6-1
BS ISO 3865
BS EN ISO 665
BS 6089
BS EN ISO 8892
BS EN 60034-9
content
Oilseeds. Reduction of laboratory sample
to test sample
BS ISO 10897 Collets for tool holders with
taper ratio 1:10 - Collets, holders, nuts
BS ISO 188 Rubber, vulcanized or
thermoplastic - Accelerated ageing and
heat resistance tests
BS EN 12256 Plastics piping systems Thermoplastics fittings - Test method for
mechanical strength or flexibility of
fabricated fittings
BS ISO 8032 Rubber and plastics hose
assemblies - Flexing combined with
hydraulic impulse test (half-omega test)
HC 104 Specification for 19 % chromium10 % nickel niobium-stabilized corrosionresisting steel castings (460 MPa)
BS ISO 6133 Rubber and plastics Analysis of multi-peak traces obtained in
determinations of tear strength and
adhesion strength
BS ISO 6133 Rubber and plastics Analysis of multi-peak traces obtained in
determinations of tear strength and
adhesion strength
BS EN 186260 Harmonized system of
quality assessment for electronic
components - Sectional specification:
Connector sets for optical fibres and cables
- Type SC
BS EN 60534-6-1 Industrial-process
control valves - Part 6 : Mounting details
for attachment of positioners to control
valves - Section 1 : Positioner mounting on
linear actuators
BS ISO 3865 Rubber, vulcanized or
thermoplastic - Methods of test for staining
in contact with organic material
Oilseeds. Determination of moisture and
volatile matter content
Guide to assessment of concrete strength in
existing structures
Oilseed residues. Determination of total
residual hexane
BS EN 60034-9 Rotating electrical
BS EN 60034-9
BS 7263 : Part 2
BS 4540: Part 1
BS 4540: Part 2
BS 4585 : Part 1
BS 4585-3
BS EN 60814
BS 5086-5
BS 1741-13
BS 6102-5
BS 4585 : Part 12
BS 4585 : Part 13
BS 4585 : Part 14
BS 6493 : Part 2 : Section 2.1
BS 4585 : Part 15
BS 6102-5
BS 4585 : Part 16
machines - Part 9 : Noise limits
BS EN 60034-9 Rotating electrical
machines - Part 9 : Noise limits
Precast concrete flags, kerbs, channels,
edgings and quadrants -- Code of practice
for laying
Sampling of spices and condiments -Methods of sampling
Sampling of spices and condiments -Method for preparation of a ground sample
for analysis
Methods of test for spices and condiments - Determination of extraneous matter
BS 4585-3 Methods of test for spices and
condiments - Part 3 : Determination of total
ash
BS EN 60814 Insulating liquids - Oilimpregnated paper and pressboard Determination of water by automatic
coulometric Karl Fischer titration
BS 5086-5 Analysis of butter - Part 5 :
Method for determination of salt content
BS 1741-13 Methods for chemical analysis
of liquid milk and cream - Part 13 :
Determination of lactulose content of heattreated milk (HPLC method)
BS 6102-5 Cycles - Part 5 : Specification
for bicycle tyre designations and
dimensions
Methods of test for spices and condiments - Determination of piperine content of
pepper
Methods of test for spices and condiments - Determination of colouring power of
turmeric
Methods of test for spices and condiments - Determination of filth
Semiconductor devices -- Integrated
circuits -- General
Methods of test for spices and condiments - Determination of volatile oil content
BS 6102-5 Cycles - Part 5 : Specification
for bicycle tyre designations and
dimensions
Methods of test for spices and condiments - Determination of total natural colouring
BS 4585 : Part 17
BS 4585 : Part 18
BS 4585 : Part 2
BS 4585 : Part 3
BS 4585 : Part 4
BS 4585 : Part 6
BS 4585 : Part 7
BS 9430
BS 4585 : Part 8
BS 4585 : Part 9
BS 9460
BS ISO 10914
BS ISO 3338-2
BS ISO 3338-1
BS 9493
matter content of ground (powdered)
paprika
Methods of test for spices and condiments - Test methods specific to saffron
Methods of test for spices and condiments - Determination of total capsaicinoid
content of chillies and chilli oleoresins
(high-performance liquid chromatographic
method)
Methods of test for spices and condiments - Determination of moisture content
(entrainment method)
Methods of test for spices and condiments - Determination of total ash
Methods of test for spices and condiments - Determination of alcohol-soluble extract
Methods of test for spices and condiments - Determination of non-volatile ether
extract
Methods of test for spices and condiments - Determination of Scoville index of
chillies
Rules for the preparation of detail
specifications for integrated circuits of
assessed quality: voltage regulators. Full
assessment level
Methods of test for spices and condiments - Determination of degree of fineness of
grinding - hand sieving method (reference
method)
Methods of test for spices and condiments - Determination of acid-insoluble ash
Rules for the preparation of detail
specifications for integrated circuits of
assessed quality : differential operational
amplifiers. General application category
BS ISO 10914 Assembly tools for screws
and nuts - Sockets and wrenches for spline
drive
BS ISO 3338-2 Cylindrical shanks for
milling cutters - Part 2 : Dimensional
characteristics of flatted cylindrical shanks
BS ISO 3338-1 Cylindrical shanks for
milling cutters - Part 1 : Dimensional
characteristics of plain cylindrical shanks
Rules for the preparation of detail
BS EN 60942
BS EN 131800
BS EN 131801
BS CECC 63000
BS 6145
BS 7087: Part 1
BS CECC 63100
BS 7087: Part 11
BS 7087: Part 12
BS EN 131802
BS CECC 63101
BS 7087: Part 13
BS 7087: Part 14
BS CECC 63200
BS 7087: Part 15
BS 7087: Part 16
BS 7087: Part 17
specifications for integrated circnits of
assessed quality which perform mixed
digital and/Or analogue fnnctions
BS EN 60942 Electroacoustics - Sound
calibrators
NULL
NULL
Harmonized system of quality assessment
for electronic components. Generic
specification : film and hybrid integrated
circuits
Specification for saffron
Herbs and spices ready for food use -Specification for black and white pepper
(whole and ground)
Harmonized system of quality assessment
for electronic components : sectional
specification : film and hybrid integrated
circuits
Herbs and spices ready for food use -Specification for ground paprika
Herbs and spices ready for food use -Specification for dried basil (bouquets,
rubbed and ground)
NULL
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification :
film and hybrid integrated circuits
Herbs and spices ready for food use -Specification for turmeric (whole and
ground)
Herbs and spices ready for food use -Specification for dried nutmeg and dried
mace
Harmonized system of quality assessment
for electronic components : sectional
specification : film and hybrid integrated
circuits (capability approval)
Herbs and spices ready for food use -Specification for cinnamon (whole and
ground)
Herbs and spices ready for food use -Specification for oregano (whole, rubbed
and ground)
Herbs and spices ready for food use --
BS 7087: Part 18
BS 7087: Part 19
BS CECC 63201
BS 7087: Part 2
BS 7087: Part 20
BS 7087: Part 21
BS 7087: Part 22
BS 7087: Part 23
BS 7087: Part 24
BS 7087: Part 25
BS 7087: Part 26
BS 7087: Part 3
BS 7087: Part 4
BS 7087: Part 5
BS 7087: Part 6
Specification for chillies (whole and
ground)
Herbs and spices ready for food use -Specification for dried rosemary (whole,
rubbed and ground)
Herbs and spices ready for food use -Specification for fennel seeds (whole and
ground)
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification :
film and hybrid integrated circuits
(capability approval)
Herbs and spices ready for food use -Specification for dried thyme (whole and
ground)
Herbs and spices ready for food use -Specification for dried parsley (cut, rubbed
and ground)
Herbs and spices ready for food use -Specification for bay leaves (whole and
ground)
Herbs and spices ready for food use -Specification for dried mustard seeds
(whole and ground)
Herbs and spices ready for food use -Specification for dried caraway seeds
(whole and ground)
Herbs and spices ready for food use -Specification for dried pimento (allspice)
(whole and ground)
Herbs and spices ready for food use -Specification for dehydrated onion
Herbs and spices ready for food use -Specification for dehydrated garlic
Herbs and spices ready for food use -Specification for dried sage (whole and
ground)
Herbs and spices ready for food use -Specification for cloves (whole and
ground)
Herbs and spices ready for food use -Specification for dried cumin (whale and
ground)
Herbs and spices ready for food use -Specification for coriander seeds (whole
BS 7087: Part 7
BS 7087: Part 8
BS 7087: Part 9
BS EN 130900
BS 998
BS 5886
BS 5927
BS 5098
BS EN 130901
BS EN 130902
BS EN ISO 11985
BS 5586 : Part 1
BS 7435 : Part 2
BS 5929 : Part 1
BS 5929 : Part 2
BS ISO 13359
BS 5929 : Part 3
BS ISO/TR 12765
BS ISO 10110-13
and ground)
Herbs and spices ready for food use -Specification for dried fenugreek (whole or
ground)
Herbs and spices ready for food use -Specification for dried ginger (whole and
ground)
Herbs and spices ready for food use -Specification for dried marjoram (whole,
rubbed and ground)
NULL
Specification for vacuum salt for food use
Methods for field pressure testing of
asbestos-cement pipelines
Guide for laying of asbestos-cement
pipelines
Glossary of terms relating to sensory
analysis
NULL
NULL
BS EN ISO 11985 Ophthalmic optics Contact lenses - Ageing by exposure to UV
and visible radiation (in vitro method)
Sensory analysis apparatus -- Specification
for wine-tasting glass
Fibre cement flue pipes, fittings and
terminals -- Specification for heavy quality
fibre cement flue pipes, fittings and
terminals
Methods for sensory analysis of food -General guide to methodology
Methods for sensory analysis of food -Paired comparison test
BS ISO 13359 Measurement of conductive
liquid flow in closed conduits - Flanged
electromagnetic flowmeters - Overall
length
Methods for sensory analysis of food -Triangular test
BS ISO/TR 12765 Measurement of fluid
flow in closed conduits - Methods using
transit-time ultrasonic flowmeters
BS ISO 10110-13 Optics and optical
instruments - Preparation of drawings for
optical elements and systems - Part 13 :
Laser irradiation damage threshold
BS 5929 : Part 4
BS 5929 : Part 5
BS 5929 : Part 6
BS CECC 90101
BS 5929 : Part 7
BS 5929 : Part 8
BS 5929 : Part 9
BS ISO 10110-13
BS 5202-19
BS ISO 12213-1
BS ISO 12213-2
BS ISO 12213-3
BS 7183
BS 7667 : Part 1
BS 6889
BS 6748
BS 6813
Methods for sensory analysis of food -Flavour profile methods
Methods for sensory analysis of food -- 'A''not A' test
Methods for sensory analysis of food -Ranking
Specification for harmonized system of
quality assessment for electronic
components. Family specification : digital
integrated TTL circuits, series 54, 64, 74,
84
Methods for sensory analysis of food -Investigating sensitivity of taste
Methods for sensory analysis of food -Duo-trio test
Methods for sensory analysis of food -Initiation and training of assessors in the
detection and recognition of odours
BS ISO 10110-13 Optics and optical
instruments - Preparation of drawings for
optical elements and systems - Part 13 :
Laser irradiation damage threshold
BS 5202-19 Methods for chemical analysis
of tobacco and tobacco products - Part 19 :
Determination of water content (Karl
Fischer method)
BS ISO 12213-1 Natural gas - Calculation
of compression factor - Part 1 :
Introduction and guidelines
BS ISO 12213-2 Natural gas - Calculation
of compression factor - Part 2 : Calculation
using a molar composition analysis
BS ISO 12213-3 Natural gas - Calculation
of compression factor - Part 3 : Calculation
using measured physical properties
Guide to design of test rooms for sensory
analysis of food
Assessors for sensory analysis -- Guide to
the selection, training and monitoring of
selected assessors
Specification for generating racks for
synchronous belt drive pulleys
Specification for limits of metal release
from ceramic ware, glassware, glass
ceramic ware and vitreous enamel ware
Specification for trade cutlery for use with
BS 7557
BS EN 181103
BS EN 181104
BS EN 61628-1
BS EN 60730-2-9
BS CECC 90104
BS CECC 90105
BS 2640
BS 1821
BS 6100 : Part 1 : Section 1.3 : Subsection
1.3.6
food
Specification for limits of metal release
from painted surfaces of articles, liable to
come into contact with foodstuffs
BS EN 181103 Harmonized system of
quality assessment for electronic
components - Blank detail specification:
Fibre optic branching devices - Type: Non
wavelength selective transmissive star for
telecommunication application
BS EN 181104 Harmonized system of
quality assessment for electronic
components - Blank detail specification:
Fibre optic branching devices - Type :
Wavelength selective transmissive star for
telecommunication application
BS EN 61628-1 Corrugated pressboard and
presspaper for electrical purposes - Part 1 :
Definitions, designations and general
requirements
BS EN 60730-2-9 Specification for
Automatic electrical controls for household
and similar use - Part 2 : Particular
requirements - Section 2.9 : Temperature
sensing controls
Specification for harmonized system of
quality assessment for electronic
components. Family specification : C.
MOS digital integrated circuits, series
4000B and 4000UB
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification :
fusible link programmable bipolar read
only memories, silicon monolithic
integrated circuits
BS 2640 Specification for Class II oxyacetylene welding of carbon steel pipework
for carrying fluids
BS 1821 Specification for Class I oxyacetylene welding of ferritic pipework for
carrying fluids
Glossary of building and civil engineering
terms -- General and miscellaneous -- Parts
of construction works -- Jointing products,
builders' hardware and accessories
BS 1289 : Part 1
BS 5763 : Part 17
BS CECC 90111
BS CECC 90113
BS CECC 90200
BS 6956 : Part 1
BS 6956 : Part 6
BS CECC 90114
BS 5763 : Part 17
BS CECC 90115
BS 5763 : Part 17
BS 7799 : Part 1
BS 1289 : Part 1 Flue blocks and masonry
terminals for gas appliances - Part 1 :
Specification for precast concrete flue
blocks and terminals
BS 5763 : Part 17 Methods for
Microbiological examination of food and
animal feeding stuffs - Part 17 : Detection
of thermotolerant Campylobacter
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification.
MOS read/write static memories silicon
monolithic circuits
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification.
MOS ultra-violet light erasable electrically
programmable read only memories silicon
monolithic circuits
Harmonized system of quality assessment
for electronic components : sectional
specification : analogue monolithic
integrated circuits
Jointing materials and compounds -Specification for corrugated metal joint
rings
Jointing materials and compounds -Specification for jointing compounds for
3rd family gases
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification :
programmable logic arrays (PLA)
BS 5763 : Part 17 Methods for
Microbiological examination of food and
animal feeding stuffs - Part 17 : Detection
of thermotolerant Campylobacter
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification :
digital gate array integrated circuits
BS 5763 : Part 17 Methods for
Microbiological examination of food and
animal feeding stuffs - Part 17 : Detection
of thermotolerant Campylobacter
BS 7799 : Part 1 Information security
BS 6956 : Part 7
BS EN 631-1
BS EN 26927
BS EN 631-2
BS 7799 : Part 1
BS 6554 : Part 1
BS 6554 : Part 1
BS EN 645
BS EN 646
BS EN ISO 9908
BS EN ISO 8434-1
BS EN 647
BS EN 648
BS EN 920
management - Part 1 : Code of practice for
information security management systems
Jointing materials and compounds -Specification for anaerobic jointing
compounds for use with 1st, 2nd and 3rd
family gases
Catering Containers -- Specification for
dimensions of containers
Building construction. Jointing products.
Sealants. Vocabulary
Catering Containers -- Dimensions of
accessories and supports
BS 7799 : Part 1 Information security
management - Part 1 : Code of practice for
information security management systems
BS 6554 : Part 1 Laminations for
transformers and inductors for use in
telecommunication and electronic
equipment - Part 1 : Specification for
dimensions, mechanical characteristics and
electrical testing
BS 6554 : Part 1 Laminations for
transformers and inductors for use in
telecommunication and electronic
equipment - Part 1 : Specification for
dimensions, mechanical characteristics and
electrical testing
Paper and board intended to come into
contact with foodstuffs. Preparation of a
cold water extract
Paper and board intended to come into
contact with foodstuffs. Determination of
colour fastness of dyed paper and board
BS EN ISO 9908 Technical specifications
for centrifugal pumps - Class III
BS EN ISO 8434-1 Metallic tube
connections for fluid power and general use
- Part 1 : 24° compression fittings
Paper and board intended to come into
contact with foodstuffs. Preparation of a
hot water extract
Paper and board intended to come into
contact with foodstuffs. Determination of
the fastness of fluorescent whitened paper
and board
Paper and board intended to come into
BS 7374
BS CECC 23300-003
BS EN ISO 11126-3
BS EN ISO 11126-3
BS EN ISO 11127-7
BS EN ISO 11127-7
BS 7619
BS EN 823
BS EN ISO 11127-6
BS EN ISO 11127-6
BS EN ISO 11127-5
contact with foodstuffs. Determination of
water soluble matter
Methods of test for water vapour
transmission resistance of board materials
used in buildings
BS CECC 23300-003 Harmonized system
of quality assessment for electronic
components - Capability detail
specification: Multilayer printed boards
BS EN ISO 11126-3 Preparation of steel
substrates before application of paints and
related products - Specifications for nonmetallic blast cleaning abrasives - Part 3 :
Copper refinery slag
BS EN ISO 11126-3 Preparation of steel
substrates before application of paints and
related products - Specifications for nonmetallic blast cleaning abrasives - Part 3 :
Copper refinery slag
BS EN ISO 11127-7 Preparation of steel
substrates before application of paints and
related products - Test methods for nonmetallic blast-cleaning abrasives - Part 7 :
Determination of water-soluble chlorides
BS EN ISO 11127-7 Preparation of steel
substrates before application of paints and
related products - Test methods for nonmetallic blast-cleaning abrasives - Part 7 :
Determination of water-soluble chlorides
Specification for extruded cellular
unplasticized PVC (PVC-UE) profiles
Thermal insulating products for building
applications. Determination of thickness
BS EN ISO 11127-6 Preparation of steel
substrates before application of paints and
related products - Test methods for nonmetallic blast-cleaning abrasives - Part 6 :
Determination of water-soluble
contaminants by conductivity measurement
BS EN ISO 11127-6 Preparation of steel
substrates before application of paints and
related products - Test methods for nonmetallic blast-cleaning abrasives - Part 6 :
Determination of water-soluble
contaminants by conductivity measurement
BS EN ISO 11127-5 Preparation of steel
BS EN ISO 11127-5
BS EN 824
BS EN 825
DD ENV 1186-1
DD ENV 1186-12
DD ENV 1186-2
DD ENV 1186-3
BS EN ISO 11127-4
BS EN ISO 11127-4
DD ENV 1186-5
DD ENV 1186-6
substrates before application of paints and
related products - Test methods for nonmetallic blast-cleaning abrasives - Part 5 :
Determination of moisture
BS EN ISO 11127-5 Preparation of steel
substrates before application of paints and
related products - Test methods for nonmetallic blast-cleaning abrasives - Part 5 :
Determination of moisture
Thermal insulating products for building
applications. Determination of squareness
Thermal insulating products for building
applications. Determination of flatness
Materials and articles in contact with
foodstuffs. Plastics -- Guide to the selection
of conditions and test methods for overall
migration
Materials and articles in contact with
foodstuffs. Plastics -- Test methods for
overall migration at low temperatures
Materials and articles in contact with
foodstuffs. Plastics -- Test methods for
overall migration into olive oil by total
immersion
Materials and articles in contact with
foodstuffs. Plastics -- Test methods for
overall migration into aqueous simulants
by total immersion
BS EN ISO 11127-4 Preparation of steel
substrates before application of paints and
related products - Test methods for nonmetallic blast-cleaning abrasives - Part 4 :
Assessment of hardness by a glass slide test
BS EN ISO 11127-4 Preparation of steel
substrates before application of paints and
related products - Test methods for nonmetallic blast-cleaning abrasives - Part 4 :
Assessment of hardness by a glass slide test
Materials and articles in contact with
foodstuffs. Plastics -- Test methods for
overall migration into aqueous food
simulants by cell
Materials and articles in contact with
foodstuffs. Plastics -- Test methods for
overall migration into olive oil using a
pouch
DD ENV 1186-7
BS 5214:Part 1
BS 5214:Part 2
BS 6679
BS 3547
BS EN ISO 11127-3
BS CECC 90301
BS EN 289
BS 4825 : Part 1
BS 4825 : Part 2
BS 4825 : Part 3
BS 4825 : Part 4
BS CECC 90300
Materials and articles in contact with
foodstuffs. Plastics -- Test methods for
overall migration into aqueous simulants
using a pouch
Specification for testing machines for
rubbers and plastics -- Tensile, fiexural and
compression types (constant rate of
traverse)
Specification for testing machines for
rubbers and plastics -- Constant rate of
force application machines
Specification for technical safety
requirements for the design and
construction of injection moulding
machines for plastics and rubber
Specification for electrically-heated food
conveyers and carriers
BS EN ISO 11127-3 Preparation of steel
substrates before application of paints and
related products - Test methods for nonmetallic blast-cleaning abrasives - Part 3 :
Determination of apparent density
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification :
integrated line transmitters and receivers
Rubber and plastics machinery.
Compression and transfer moulding
presses. Safety requirements for the design
Stainless steel tubes and fittings for the
food industry and other hygienic
applications -- Specification for tubes
Stainless steel tubes and fittings for the
food industry and other hygienic
applications -- Specification for bends and
tees
Stainless steel tubes and fittings for the
food industry and other hygienic
applications -- Specification for clamp type
couplings
Stainless steel tubes and fittings for the
food industry and other hygienic
applications -- Specification for threaded
(IDF type) coupling
Harmonized system of quality assessment
for electronic components. Sectional
BS 1635
BS 4422 : Part 1
BS 4422 : Part 2
BS 4825 : Part 5
BS EN 422
BS 4422 : Part 3
BS QC 760001
BS 4156
BS EN ISO 11127-3
BS EN ISO 11127-2
BS 4422 : Part 4
BS QC 760100
BS QC 760101
specification : interface monolithic
integrated circuits
Recommendations for graphic symbols and
abbreviations for fire protection drawings
Glossary of terms associated with fire -General terms and phenomena of fire
Glossary of terms associated with fire -Structural fire protection
Stainless steel tubes and fittings for the
food industry and other hygienic
applications -- Specification for recessed
ring joint type couplings
Rubber and plastics. Machines. Safety.
Blow moulding machines intended for the
production of hollow articles.
Requirements for the design and
construction
Glossary of terms associated with fire -Fire detection and alarm
Harmonized system of quality assessment
for electronic components. Film and hybrid
integrated circuits. Generic specification.
Requirements for internal visual inspection
Recommendations for peat for horticultural
and landscape use
BS EN ISO 11127-3 Preparation of steel
substrates before application of paints and
related products - Test methods for nonmetallic blast-cleaning abrasives - Part 3 :
Determination of apparent density
BS EN ISO 11127-2 Preparation of steel
substrates before application of paints and
related products - Test methods for nonmetallic blast-cleaning abrasives - Part 2 :
Determination of particle size distribution
Glossary of terms associated with fire -Fire extinguishing equipment
Harmonized system of quality assessment
for electronic components. Semiconductor
devices. Integrated circuits. Sectional
specification for film and hybrid integrated
circuits: qualification approval
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Blank detail
BS 4422 : Part 5
BS EN ISO 11127-2
BS 4422 : Part 6
BS 5551 : Part 1 : Section 1.3
BS QC 760201
BS 4422 : Part 7
BS 5551 : Part 1 : Section 1.1
BS 4422 : Part 9
BS 5551 : Part 1 : Section 1.2
BS 5551 : Part 2 : Section 2.1
BS QC 790100
BS QC 790101
BS QC 790104
specification. Film and hybrid integrated
circuits: qualification approval procedure
Glossary of terms associated with fire -Smoke control
BS EN ISO 11127-2 Preparation of steel
substrates before application of paints and
related products - Test methods for nonmetallic blast-cleaning abrasives - Part 2 :
Determination of particle size distribution
Glossary of terms associated with fire -Evacuation and means of escape
Fertilizers -- Terminology and labelling -Specification for marking of containers
(packages, drums, etc.) and labels
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Blank detail
specification. Film and hybrid integrated
circuits: capability approval
Glossary of terms associated with fire -Explosion detection and suppression means
Fertilizers -- Terminology and labelling -Classification
Glossary of terms associated with fire -Marine terms
Fertilizers -- Terminology and labelling -Glossary of terms
Fertilizers -- Sampling -- Simple sampling
method for small lots of solid fertilizer
Harmonized system of quality assessment
for electric components. Semiconductor
devices. Sectional specification for
semiconductor integrated circuits excluding
hybrid circuits
Harmonized system of quality assessment
for electronic components. Semiconductor
devices. Integrated circuits. Sectional
specification for semiconductor integrated
circuits excluding hybrid circuits. Internal
visual examination for semiconductor
integrate
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Family specification.
BS 5551 : Part 2 : Section 2.10
BS 5551 : Part 2 : Section 2.2
BS QC 790105
BS 5551 : Part 2 : Section 2.3
BS QC 790106
BS QC 790107
BS 5551 : Part 2 : Section 2.4
BS QC 790109
BS EN 60730-2-2
BS IEC 61336
Complementary MOS digital integrated
circuits, series 4000 B and 4000 UB
Fertilizers -- Sampling -- Method of
checking the performance of mechanical
devices for sampling of solid fertilizer
moving in bulk
Fertilizers -- Sampling -- Presentation of
sampling reports
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Blank detail
specification. Integrated circuit fusible-link
programmable bipolar read-only memories
Fertilizers -- Sampling -- Sampling from a
conveyor by stopping the belt [reference
method]
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Digital integrated
circuits. Blank detail specification. MOS
ultraviolet light erasable electrically
programmable read-only me
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Digital integrated
circuits. Blank detail specification.
Integrated circuit dynamic read/write
memories
Fertilizers -- Sampling -- Practical
arrangements for final samples
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Family specification for
HCMOS digital integrated circuits series
54/74 HC, 54/74 HCT, 54/74 HCU.
BS EN 60730-2-2 Specification for
Automatic electrical controls for household
and similar use - Part 2 : Particular
requirements - Section 2.2 : Thermal motor
protectors
BS IEC 61336 Nuclear instrumentation Thickness measurement systems utilizing
BS 5551 : Part 2 : Section 2.7
BS 5551 : Part 2 : Section 2.8
BS 5551 : Part 2 : Section 2.9
BS 5551 : Part 3 : Section 3.3
BS QC 790111
BS ISO 3897
BS QC 790130
BS 5551 : Part 3 : Section 3.4
BS 5551 : Part 3 : Section 3.6
BS QC 790131
BS 5551 : Part 4 : Section 4.1 : Subsection
4.1.1
ionizing radiation - Definitions and test
methods
Fertilizers -- Sampling -Recommendations for minimum mass of
increment of a solid fertilizer to be taken to
be representative of the total sampling unit
Fertilizers -- Sampling -- Methods for
preparation of samples of solid fertilizer for
chemical and physical analysis
Fertilizers -- Sampling -- Sampling plan for
the evaluation of a large delivery of solid
fertilizer
Fertilizers -- Physical properties -- Method
for determination of bulk density (loose) of
fine-grained fertilizers
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Blank detail
specification : integrated circuit static
read/write memories
BS ISO 3897 Photography - Processed
photographic plates - Storage practices
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Blank detail
specification. HCMOS digital integrated
circuits (series 54/74 HC, 54/74 HCT,
54/74 HCU)
Fertilizers -- Physical properties -- Method
for determination of oil retention of high
nitrogen content, straight ammonium
nitrate fertilizers
Fertilizers -- Physical properties -- Method
for determination of static angle of repose
of solid fertilizers
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Blank detail
specification. Complementary MOS digital
integrated circuits (series 4000 B and 4000
UB)
Fertilizers -- Chemical analysis -Determination of nitrogen -- Nitron
BS 5551 : Part 4 : Section 4.1 : Subsection
4.1.2
BS QC 790132
BS QC 790202
BS 5551 : Part 4 : Section 4.1 : Subsection
4.1.3
BS 5551 : Part 4 : Section 4.1 : Subsection
4.1.4
BS 5551 : Part 4 : Section 4.1 : Subsection
4.1.5
BS 5588 : Part 1
BS 5588 : Part 10
BS 5588 : Part 2
BS 5551 : Part 4 : Section 4.2 : Subsection
4.2.1
BS 5551 : Part 4 : Section 4.2 : Subsection
gravimetric method for determination of
nitrate nitrogen
Fertilizers -- Chemical analysis -Determination of nitrogen -- Determination
of ammoniacal nitrogen, titrimetric method
after distillation
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Blank detail
specification. Bipolar monolithic digital
integrated circuit gates (excluding
uncommitted logic arrays)
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Blank detail
specification. Monolithic integrated
operational amplifiers
Fertilizers -- Chemical analysis -Determination of nitrogen -- Method for
determination of total nitrogen content
(titrimetric method after distillation)
Fertilizers -- Chemical analysis -Determination of nitrogen -- Method for
determination of ammoniacal nitrogen
content in the presence of other substances
which release ammonia when treated with
sodium hydroxide (titrimetric method)
Fertilizers -- Chemical analysis -Determination of nitrogen -- Method for
determination of urea nitrogen content
(gravimetric method using xanthydrol)
Fire precautions in the design, construction
and use of buildings -- Code of practice for
residential buildings
Fire precautions in the design, construction
and use of buildings -- Code of practice for
shopping complexes
Fire precautions in the design, construction
and use of buildings -- Code of practice for
shops
Fertilizers -- Chemical analysis -Determination of phosphorus -- Extraction
of water-soluble phosphates
Fertilizers -- Chemical analysis --
4.2.2
BS 5551 : Part 4 : Section 4.2 : Subsection
4.2.3
BS 5551 : Part 4 : Section 4.3 : Subsection
4.3.1
BS 5551 : Part 4 : Section 4.3 : Subsection
4.3.2
BS 5551 : Part 4 : Section 4.3 : Subsection
4.3.3
BS 5551 : Part 4 : Section 4.3 : Subsection
4.3.4
BS 5551 : Part 4 : Section 4.4 : Subsection
4.4.1
BS 5551 : Part 4 : Section 4.4 : Subsection
4.4.2
BS 5551 : Part 4 : Section 4.5
BS 5588 : Part 3
BS EN 1236
BS 5588 : Part 5
BS EN 1237
BS 5588 : Part 6
Determination of phosphorus -- Extraction
of phosphates soluble in mineral acids
Fertilizers -- Chemical analysis -Determination of phosphorus -- Method for
determination of phosphorus content
(quinoline molybdophosphate gravimetric
method)
Fertilizers -- Chemical analysis -Determination of potassium -- Preparation
of the test solution for determination of
water-soluble potassium content
Fertilizers -- Chemical analysis -Determination of potassium -- Preparation
of the test solution for determination of
acid-soluble potassium content
Fertilizers -- Chemical analysis -Determination of potassium -- Method for
determination of water-soluble potassium
content (potassium tetraphenylborate
gravimetric method : reference method)
Fertilizers -- Chemical analysis -Determination of potassium -- Method for
determination of potassium content
(titrimetric method)
Fertilizers -- Chemical analysis -Determination of water -- Gravimetric
method by drying under reduced pressure
Fertilizers -- Chemical analysis -Determination of water -- Gravimetric
method by drying at 105øC
Fertilizers -- Chemical analysis -- Method
for determination of mineral-acid-soluble
sulfate content of solid fertilizers
Fire precautions in the design, construction
and use of buildings -- Code of practice for
office buildings
Fertilizers. Determination of bulk density
(loose)
Fire precautions in the design, construction
and use of buildings -- Code of practice for
firefighting stairs and lifts
Fertilizers. Determination of bulk density
(tapped)
Fire precautions in the design, construction
and use of buildings -- Code of practice for
places of assembly
BS 1831 : Part 1
BS 4172 : Part 1
BS 4172 : Part 2
BS 4926
BS 5502 : Part 81
BS 6279 : Part 3
BS 5588 : Part 9
BS EN 2
BS 750
BS 2957
BS 3054
BS 3165
BS 3169
BS 3251
BS 3367
BS 3566
BS 3864
BS 5041:Part 1
BS 5041:Part 2
BS 5041:Part 3
Common names for pesticides -- Guide to
principles for selection of common names
Hand-held pressurized aerosol dispensers
against houseflies -- Specification for
insecticidal efficiency
Hand-held pressurized aerosol dispensers
against houseflies -- Method for
determination of insecticidal efficiency
Specification for dichlorophen
Buildings and structures for agriculture -Code of practice for design and
construction of chemical stores
Storage of cereals and pulses -- Guide to
control of attack by pests
Fire precautions in the design, construction
and use of buildings -- Code of practice for
ventilation and air conditioning ductwork
Classification of fires
Specification for underground fire hydrants
and surface box frames and covers
Specification for fireman's axe with ash
handle
Specification for fireman's axe with rubber
insulated handle
Specification for rubber and plastics
suction hoses and hose assemblies for firefighting purposes
Specification for first aid reel hoses for
fire-fighting purposes
Specification. Indicator plates for fire
hydrants and emergency water supplies
Specification for fire brigade and industrial
ropes and rescue lines
Specification for lightweight salvage sheets
for fire service use
Specification for protective helmets for
firefighters
Fire hydrant systems equipment -Specification for landing valves for wet
risers
Fire hydrant systems equipment -Specification for landing valves for dry
risers
Fire hydrant systems equipment -Specification for inlet breechings for dry
riser inlets
BS 5041:Part 4
BS 5041:Part 5
BS 5306 : Part 0
BS 2474
BS 5306 : Part 1
BS 5306 : Part 2
BS 5306 : Part 3
BS 5306 : Part 4
BS 5306 : Part 5 : Section 5.1
BS 5306 : Part 5 : Section 5.2
BS 5306 : Part 6 : Section 6.1
BS 5908
BS 5306 : Part 6 : Section 6.2
BS 5306 : Part 7
BS 5396
Fire hydrant systems equipment -Specification for boxes for landing valves
for dry risers
Fire hydrant systems equipment -Specification for boxes for foam inlets and
dry riser inlets
Fire extinguishing installations and
equipment on premises -- Guide for the
selection of installed systems and other fire
equipment
Recommendations for names for chemicals
used in industry
Fire extinguishing installations and
equipment on premises -- Hydrant systems,
hose reels and foam inlets
Fire extinguishing installations and
equipment on premises -- Specification for
sprinkler systems
Fire extinguishing installations and
equipment on premises -- Code of practice
for selection, installation and maintenance
of portable fire extinguishers
Fire extinguishing installations and
equipment on premises -- Specification for
carbon dioxide systems
Fire extinguishing installations and
equipment on premises -- Halon systems -Specification for halon 1301 total flooding
systems
Fire extinguishing installations and
equipment on premises -- Halon systems -Halon 1211 total flooding systems
Fire extinguishing installations and
equipment on premises -- Foam systems -Specification for low expansion foam
systems
Code of practice for fire precautions in the
chemical and allied industries
Fire extinguishing installations and
equipment on premises -- Foam systems -Specification for medium and high
expansion foam systems
Fire extinguishing installations and
equipment on premises -- Specification for
powder systems
Specification for seamless steel CO2
BS 6165
BS 6391
BS 6643 : Part 1
BS 6643 : Part 2
BS 767
BS 6755 : Part 2
BS 7327: Part 1
BS 2586
BS 2646 : Part 1
BS 2646 : Part 2
BS 2646 : Part 3
BS 2646 : Part 4
BS 2646 : Part 5
BS EN 615
BS 2648
BS 3145
BS EN 671-1
BS EN 671-2
containers for fixed fire-fighting
installations on ships
Specification for small disposable fire
extinguishers of the aerosol type
Specification for non-percolating layflat
delivery hoses and hose assemblies for fire
fighting purposes
Recharging fire extinguishers
(manufactured to BS 5423 'Specification
for portable fire extinguishers') -Specification for procedure and materials
Recharging fire extinguishers
(manufactured to BS 5423 'Specification
for portable fire extinguishers') -Specification for powder refill charges
Specification for centrifuges of the basket
and bowl type for use in industrial and
commercial applications
Testing of valves -- Specification for fire
type-testing requirements
Small fixed fire extinguishers -Specification for small fixed halon fire
extinguishers
Specification for glass and reference
electrodes for the measurement of pH
Autoclaves for sterilization in laboratories - Specification for design, construction,
safety and performance
Autoclaves for sterilization in laboratories - Guide to planning and installation
Autoclaves for sterilization in laboratories - Guide to safe use and operation
Autoclaves for sterilization in laboratories - Guide to maintenance
Autoclaves for sterilization in laboratories - Methods of test for function and
performance
Fire protection. Fire extinguishing media.
Specifications for powders (other than class
D powders)
Performance requirements for electricallyheated laboratory drying ovens
Specification for laboratory pH meters
Fixed fire fighting systems. Hose systems - Hose reels with semi-rigid hose
Fixed fire fighting systems. Hose systems -
BS QC 790303
BS 3202 : Part 1
BS 3202 : Part 2
BS 3202 : Part 3
BS 3202 : Part 4
BS QC 790304
BS EN 27201-1
BS EN 27201-2
BS 4309
BS 4314 : Part 1
BS 5470
BS 5726 : Part 1
BS 5726 : Part 2
BS 5726 : Part 3
- Hose systems with lay-flat hose
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Blank detail
specification. Linear digital-to-analogue
converters (DAC)
Laboratory furniture and fittings -Introduction
Laboratory furniture and fittings -Specification for performance
Laboratory furniture and fittings -Recommendations for design
Laboratory furniture and fittings -Recommendations for installation
Specification for harmonized system of
quality assessment for electronic
components. Semiconductor devices.
Integrated circuits. Blank detail
specification. Linear analogue-to-digital
converters (ADC)
Fire protection. Fire extinguishing media.
Halogenated hydrocarbons -Specifications for halon 1211 and halon
1301
Fire protection. Fire extinguishing media.
Halogenated hydrocarbons -- Code of
practice for safe handling and transfer
procedures
Methods of measuring the performance of
laboratory electric resistance furnaces
Specification for apparatus for physical
methods of gas analysis -- Infra-red gas
analysers for industrial use
Specification for glass alcohol hydrometers
not incorporating a thermometer
Microbiological safety cabinets -Specification for design, construction and
performance prior to installation
Microbiological safety cabinets -Recommendations for information to be
exchanged between purchaser, vendor and
installer and recommendations for
installation
Microbiological safety cabinets -Specification for performance after
BS 5726 : Part 4
BS 5849
BS 5865
BS 6438 : Part 1
BS 6438 : Part 2
BS 6438 : Part 3
BS 7183
BS 7258 : Part 1
BS 7258 : Part 3
BS 7258 : Part 4
BS 7310
BS EN 61207-1
BS EN 61207-2
BS EN 61207-6
BS EN 61285
BS 572
BS 4677
installation
Microbiological safety cabinets -Recommendations for selection, use and
maintenance
Method of expression of performance of air
quality infra-red analysers
Specification for construction and
operation of spirit burner for small-scale
laboratory flame tests
Electrochemical analyzers -- Method for
specifying performance common to all
analyzers
Electrochemical analyzers -- Method for
specifying performance of pH value
analyzers
Electrochemical analyzers -- Method for
specifying performance of electrolytic
conductivity analyzers
Guide to design of test rooms for sensory
analysis of food
Laboratory fume cupboards -- Specification
for safety and performance
Laboratory fume cupboards -Recommendations for selection, use and
maintenance
Laboratory fume cupboards -- Method for
determination of the containment value of a
laboratory fume cupboard
Specification for ion-selective electrodes,
reference electrodes, combination
electrodes and ion-selective electrode
meters for determination of ions in solution
Expression of perfomance of gas analyzers
-- General
Expression of perfomance of gas analyzers
-- Oxygen in gas (utilizing hightemperature electrochemical sensors)
Expression of perfomance of gas analyzers
-- Photometric analyzers
Industrial-process control. Safety of
analyser houses
Specification for interchangeable conical
ground glass joints
BS 4677 Specification for Arc welding of
austenitic stainless steel pipework for
carrying fluids
BS 6990
BS 604
BS 611 : Part 2
BS 612
BS 615
BS 658
BS 675
BS 676
BS 700 : Part 1
BS 700 : Part 2
BS 700 : Part 3
BS 733 : Part 1
BS 733 : Part 2
BS 748
BS 756
BS 1132
BS 1428 : Part B2
BS 1428 : Part D1
BS 1428 : Part D4
BS 1428 : Part D5
BS 1583
BS 2071
BS 2461
BS 2554
BS 6990 Code of practice for Welding on
steel pipes containing process fluids or
their residuals
Specification for graduated glass measuring
cylinders
Specification for plastics Petri dishes for
single use
Specification for Nessler cylinders
Specification for Kohlrausch flasks
Wood windows -- Specification for
apparatus for the determination of
distillation range (including flasks and
receivers)
Specification for sugar flasks
Specification for flasks with graduated
necks (phenols type)
Graduated pipettes -- Specification for
general requirements
Graduated pipettes -- Specification for
pipettes for which no waiting time is
specified
Graduated pipettes -- Specification for
blow-out pipettes
Pyknometers -- Specification
Pyknometers -- Methods for calibration and
use of pyknometers
Specification for haemacytometer and
particle counting chambers
Specification for Dean and Stark apparatus
Specification for automatic pipettes
Microchemical apparatus -- Apparatus for
the determination of elements by other than
combustion methods -- Specification for
ammonia distillation apparatus (Markham)
Volumetric analysis -- Specification for
burettes with pressure-filling device and
automatic zero
Volumetric analysis -- Specification for
capillary pipettes
Volumetric analysis -- Specification for
syringe pattern micro-pipette
Specification for one-mark pipettes
Specification for Soxhlet extractors
Specification for gas washing bottles
Specification for Westergren tubes and
support for the measurement of erythrocyte
BS 2701
BS 2734
BS 2735
BS 2775
BS 3218
BS 3423
BS 3473 : Part 1
BS 3473 : Part 2
BS 3473 : Part 3
BS 3473 : Part 4 : Section 4.1
BS 3473 : Part 4 : Section 4.2
BS 3473 : Part 5
BS 3517
sedimentation rate
Specification for Rees-Hugill powder
density flask
Specification for boiling flasks (narrownecked), conical, flat bottom and round
bottom
Specification for iodine flasks
Specification for rubber stoppers and
tubing for general laboratory use
Specification for test tubes and boiling
tubes
Recommendations for design of glass
vacuum vessels (including desiccators) for
laboratory use
Chemical resistance of glass used in the
production of laboratory glassware Method
for determination of resistance of glass to
attack by a boiling aqueous solution of
mixed alkali
Chemical resistance of glass used in the
production of laboratory glassware Method
for determination of hydrolytic resistance
of glass grains at 98øC
Chemical resistance of glass used in the
production of laboratory glassware Method
for determination of hydrolytic resistance
of glass grains at 121øC
Chemical resistance of glass used in the
production of laboratory glassware
Methods for determination of hydrolytic
resistance of the interior surfaces of glass
containers Determination by titration
method and classification
Chemical resistance of glass used in the
production of laboratory glassware
Methods for determination of hydrolytic
resistance of the interior surfaces of glass
containers Determination by flame
photometry and classification
Chemical resistance of glass used in the
production of laboratory glassware Method
for determination of resistance of glass to
attack by 6 mol/L hydrochloric acid at
100øC
Methods for thermal shock tests on
laboratory glassware
BS 3996
BS 5404 : Part 1
BS 5404 : Part 2
BS 5404 : Part 3
BS 5404 : Part 4
BS 5522
BS 5732
BS 5898
BS 5895
BS 5922
BS 5928
BS 6018
BS 6352
BS 6379 : Part 3
BS 6674
BS 6696
BS 6706
BS 6711 : Part 1
BS 6898
BS 7532
Specification for colour coding for onemark and graduated pipettes (including
requirements for the service performance
of the colour coding enamels)
Specification for plastics laboratory ware -Beakers
Specification for plastics laboratory ware -Graduated measuring cylinders
Specification for plastics laboratory ware -Filter funnels
Specification for plastics laboratory ware -Wash bottles
Specification for milk and milk products determination of fat content - Mojonniertype fat extraction flasks
Specification for glass disposable Pasteur
pipettes
Specification for principles of design and
construction of volumetric glassware for
laboratory use
Specification for borosilicate glass tubing
for laboratory apparatus
Specification for glass condensers for
laboratory use
Specification for bottles for laboratory use
Method of test for accuracy and precision
of mechanical handpipettes of capacity
0.05 mL and above
Specification for flasks with ground glass
joints
Sampling of coffee and coffee products -Specification for a coffee trier for sampling
green coffee
Specification for disposable micropipettes
Methods for use and testing of capacity of
volumetric glassware
Specification for disposable glass
serological pipettes
Vocabulary relating to laboratory apparatus
made essentially from glass, porcelain or
vitreous silica -- Names for items of
apparatus
Specification for glass centrifuge tubes for
general laboratory use
Method of test for accuracy and precision
of mechanical handpipettes of capacity less
BS 7657
BS 6325
BS 7653 : Part 1
BS 7653 : Part 2
BS 7653 : Part 3
BS 7653 : Part 4
BS 7709 : Part 1
BS 7709 : Part 2
BS 7709 : Part 3
BS 7709 : Part 4
BS 7709 : Part 5
BS 7709 : Part 6
BS EN ISO 6414
BS 1647 : Part 2
BS 6376 : Part 1
BS 6376 : Part 2
than 50 æL down to and including 10 æL
Specification for fuses (cut-outs), ancillary
terminal blocks and interconnecting units
up to 100 A rating, for power supplies to
buildings
Glossary of terms relating to black tea
Piston and/or plunger operated volumetric
apparatus -- Glossary of terms
Piston and/or plunger operated volumetric
apparatus -- Methods of operation
Piston and/or plunger operated volumetric
apparatus -- Methods of test
Piston and/or plunger operated volumetric
apparatus -- Specification for conditions of
test, safety and supply
Analysis of extract solutions of glass -Method for determination of silicon
dioxide by molecular absorption
spectrometry
Method for determination of sodium oxide
and potassium oxide by flame
spectrometric methods
Analysis of extract solutions of glass -Method for determination of calcium oxide
and magnesium oxide by flame atomic
absorption spectrometry
Analysis of extract solutions of glass -Method for determination of aluminium
oxide by molecular absorption
spectrometry
Analysis of extract solutions of glass -Method for determination of iron (III)
oxide by molecular absorption
spectrometry and flame atomic absorption
spectrometry
Analysis of extract solutions of glass -Method for determination of boron (III)
oxide by molecular absorption
spectrometry
Technical drawings for glassware
pH measurement -- Specification for
reference value standard solutions and
operational reference standard solutions
Reagents for chemical analysis -- Methods
of test
Reagents for chemical analysis --
BS 6376 : Part 3
BS 2511
BS 3282
BS 4404
BS 4559 : Part 4
BS 4559 : Part 5 : Section 5.1
BS 4559 : Part 5 : Section 5.4
BS 4559: Part 5: Section 5.6
BS 4559 : Part 1 : Section 1.1
BS 4559: Part 5: Section 5.3
BS 4559: Part 6
BS 4559: Part 7
BS 4559: Part 9: Section 9.1
BS 4559: Part 9: Section 9.2
BS 4603
BS 5309 : Part 1
Specifications (first series)
Reagents for chemical analysis -Specifications (second series)
Methods for the determination of water
(Karl Fischer method)
Glossary of terms relating to gas
chromatography
Method for the determination of arsenic
(silver diethyldithiocarbamate procedure)
Methods for preparation of calibration gas
mixtures -- Certificate of mixture
preparation
Methods for preparation of calibration gas
mixtures -- Dynamic volumetric methods -Review of methods of calibration
Methods for preparation of calibration gas
mixtures -- Dynamic volumetric methods -Continuous injection method
Methods for preparation of calibration gas
mixtures -- Dynamic volumetric methods -Sonic orifices
Weighing methods -- Methods for
preparation of calibration gas mixtures -Mixtures containing components fully
vaporizable under ambient conditions
Methods for preparation of calibration gas
mixtures -- Dynamic volumetric methods -Periodic injections into a flowing gas
stream
Methods for preparation of calibration gas
mixtures -- Saturation method
Methods for preparation of calibration gas
mixtures -- Permeation method
Methods for preparation of calibration gas
mixtures -- Comparison methods and
methods for establishing traceability -Determination of composition by
comparison methods
Methods for preparation of calibration gas
mixtures -- Comparison methods and
methods for establishing traceability -Checking by a comparison method
Method for determination of residue on
ignition or ash of chemical products
Methods for sampling chemical products -Introduction and general principles
BS 5309 : Part 2
BS 5309 : Part 3
BS 5309 : Part 4
BS 5443
BS 6337 : Part 1
BS 6337 : Part 2
BS 6337 : Part 3
BS 6337 : Part 4
BS 1647 : Part 1
BS 4633 & 4634
BS 5339
BS 5688 : Part 0
BS 3947
BS 4105
BS 6463 : Part 3
BS 6463 : Part 2
Methods for sampling chemical products -Sampling of gases
Methods for sampling chemical products -Sampling of liquids
Methods for sampling chemical products -Sampling of solids
Recommendations for a standard layout for
methods of chemical analysis by gas
chromatography
General methods of chemical analysis -Method for determination of traces of
sulphur compounds by reduction and
titrimetry
General methods of chemical analysis -Method for determination of silicon content
(reduced molybdosilicate
spectrophotometric method)
General methods of chemical analysis -Method for determination of iron content
(1,10-phenanthroline spectrophotometric
method)
General methods of chemical analysis -Method for determination of chloride ions
by potentiometry
pH measurement -- Specification for pH
scale
Method for the determination of
crystallizing point. Method for the
determination of melting point and/or
melting range
Method of measurement of colour in Hazen
units (platinum-cobalt scale) of liquid
chemical products
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- General introduction
Specification for liquid chlorine
Specification for liquid carbon dioxide,
industrial
Quicklime, hydrated lime and natural
calcium carbonate -- Methods of test for
physical properties of quicklime
Quicklime, hydrated lime and natural
calcium carbonate -- Methods of chemical
BS 5688 : Part 1
BS 5688 : Part 10
BS 5688 : Part 11
BS 5688 : Part 12
BS 5688 : Part 13
BS 5688 : Part 14
BS 5688 : Part 15
analysis
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of boric acid content of
boric acid
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of matter insoluble in
alkaline medium and preparation of test
solution
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of total aluminium
content of crude sodium borates
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of total titanium content
of crude sodium borates
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of particle size
distribution of sodium perborates by
mechanical sievin
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of chromium content of
boric acid, boric oxide and disodium
tetraborate
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of water content of
disodium tetraborates and crude sodium
BS 5688 : Part 16
BS 5688 : Part 17
BS 5688 : Part 18
BS 5688 : Part 19
BS 7546 : Part 1
BS 7546 : Part 2
BS 7546 : Part 3
BS 7554
BS 5688 : Part 2
BS 5688 : Part 20
borates
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of chloride content of
acid, boric oxide and disodium tetraborates
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of iron content of boric
acid, boric oxide, disodium tetraborates,
sodi
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of rate of solution of
sodium perborates
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of iron soluble in alkaline
medium in crude sodium borates
Hydrogen peroxide for industrial use -Method for determination of hydrogen
peroxide content
Hydrogen peroxide for industrial use -Method for determination of stability at
100øC
Hydrogen peroxide for industrial use -Method for determination of apparent
acidity
Specification for beaded desiccant silica
gel
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of boric oxide content of
boric oxide
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
BS 5688 : Part 21
BS 5688 : Part 27
BS 5688 : Part 28
BS 5688 : Part 29
BS 5688 : Part 3
BS 5688 : Part 4
BS 5688 : Part 5
and crude sodium borates for industrial use
-- Determination of aluminium soluble in
alkaline medium in crude sodium borates
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of bulk density of sodium
perborates
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of total and alkali-soluble
silica contents of crude sodium borates
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of total and alkali-soluble
calcium and magnesium contents of crude
sod
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of total and alkali-soluble
calcium and magnesium contents of crude
sod
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of sodium oxide and boric
oxide contents and loss on ignition of
disodi
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of sodium oxide, boric
oxide and available oxygen contents of
hydrated
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
BS 5688 : Part 6
BS 5688 : Part 7
BS 753
BS 975
BS 976
BS 3903
BS 5688 : Part 8
BS 5688 : Part 9
BS 3993
BS 4258 : Part 10
BS 4258 : Part 11
and crude sodium borates for industrial use
-- Determination of sulphur compounds in
boric acid, boric oxide, disodium
tetraborates
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of manganese content of
boric acid, boric oxide and disodium
tetraborat
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of copper content of boric
acid, boric oxide and disodium tetraborates
Schedule for density-composition tables for
aqueous solutions of sulphuric acid
Schedule for density-composition tables for
aqueous solutions of nitric acid
Schedule for density-composition tables for
aqueous solutions of hydrochloric acid
Methods of test for sulphuric acid, oleum,
and liquid sulphur trioxide
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of sodium oxide and boric
oxide contents of crude sodium borates
Methods of test for orthoboric acid (boric
acid), diboron trioxide (boric oxide),
disodium tetraborates, sodium perborates
and crude sodium borates for industrial use
-- Determination of loss in mass of crude
sodium borates after heating at a
temperature
Specification for hydrochloric acid,
commercial types 1 and 2
Methods of test for phosphoric acid
(orthophosphoric acid) for industrial use -Determination of oxides of nitrogen
content
Methods of test for phosphoric acid
(orthophosphoric acid) for industrial use --
BS 4258 : Part 12
BS 4258 : Part 13
BS 4258 : Part 2
BS 4258 : Part 3
BS 4258 : Part 4
BS 4258 : Part 5
BS 4258 : Part 6
BS 4258 : Part 7
BS 4258 : Part 8
BS 4258 : Part 9
BS 4367
BS 4130
BS 4651 : Part 0
BS 4651 : Part 1
BS 4651 : Part 3
Determination of lead content (atomic
absorption spectrometric method)
Methods of test for phosphoric acid
(orthophosphoric acid) for industrial use -Guide to sampling techniques
Methods of test for phosphoric acid
(orthophosphoric acid) for industrial use -Determination of soluble sulphate content
(potentiometric method)
Methods of test for phosphoric acid
(orthophosphoric acid) for industrial use -Determination of iron content
Methods of test for phosphoric acid
(orthophosphoric acid) for industrial use -Methods of test for phosphoric acid
(orthophosphoric acid) for industrial use.
Determination of sulphate content
Methods of test for phosphoric acid
(orthophosphoric acid) for industrial use -Determination of fluorine content
Methods of test for phosphoric acid
(orthophosphoric acid) for industrial use -Determination of silica content
Methods of test for phosphoric acid
(orthophosphoric acid) for industrial use -Determination of arsenic content
Methods of test for phosphoric acid
(orthophosphoric acid) for industrial use -Determination of total phosphorus (V)
oxide content : quinoline
phosphomolybdate gravimetric method
Methods of test for phosphoric acid
(orthophosphoric acid) for industrial use -Determination of calcium content (flame
atomic absorption method)
Methods of test for phosphoric acid
(orthophosphoric acid) for industrial use -Determination of chloride content
Methods of test for nitric acid
Specification for sodium hydroxide
(technical grades)
Ammonia solution -- Methods for sampling
Ammonia solution -- Method for
determination of density at 20øC
Ammonia solution -- Method for
determination of residue on evaporation
BS 4651 : Part 4
BS 4651 : Part 5
BS 4651 : Part 6
BS 4651 : Part 7
BS 5634
BS 6075 : Part 0
BS 6075 : Part 1
BS 6075 : Part 10
BS 6075 : Part 11
BS 6075 : Part 12
BS 6075 : Part 14
BS 6075 : Part 2
BS 6075 : Part 3
BS 6075 : Part 4
BS 6075 : Part 5
BS 6075 : Part 6
Ammonia solution -- Method for
determination of residue after heating at
850øC
Ammonia solution -- Method for
determination of iron content
Ammonia solution -- Methods for
determination of chloride content
Ammonia solution -- Method for
determination of carbon dioxide content
Methods of test for potassium hydroxide
Methods of sampling and test for sodium
hydroxide for industrial use -- General
introduction
Methods of sampling and test for sodium
hydroxide for industrial use -Determination of sodium hydroxide
content
Methods of sampling and test for sodium
hydroxide for industrial use -Determination of mercury content
(photometric method)
Methods of sampling and test for sodium
hydroxide for industrial use -Determination of mercury content
(flameless atomic absorption method)
Methods of sampling and test for sodium
hydroxide for industrial use -Determination of copper content
Methods of sampling and test for sodium
hydroxide for industrial use -Determination of matter insoluble in water
Methods of sampling and test for sodium
hydroxide for industrial use -Determination of chloride content
(mercurimetric method)
Methods of sampling and test for sodium
hydroxide for industrial use -Determination of iron content
Methods of sampling and test for sodium
hydroxide for industrial use -Determination of silica content
Methods of sampling and test for sodium
hydroxide for industrial use -- Sampling
and preparation of main test solution
Methods of sampling and test for sodium
hydroxide for industrial use --
BS 6075 : Part 7
BS 6075 : Part 8
BS 6075 : Part 9
BS 662 : Part 1
BS 662 : Part 2
BS 662 : Part 3
BS 1460
BS 3674
BS 3984
BS 4267 : Part 0
BS 4267 : Part 1
BS 4267 : Part 10
BS 4267 : Part 11
BS 4267 : Part 2
BS 4267 : Part 3
BS 4267 : Part 4
BS 4267 : Part 5
BS 4267 : Part 6
BS 4267 : Part 7
Determination of carbonate content
Methods of sampling and test for sodium
hydroxide for industrial use -Determination of chloride content
(photometric method)
Methods of sampling and test for sodium
hydroxide for industrial use -Determination of sulphate content
Methods of sampling and test for sodium
hydroxide for industrial use -Determination of calcium and magnesium
contents
Carbon disulphide for industrial use -Specification
Carbon disulphide for industrial use -Sampling and methods of test
Carbon disulphide for industrial use -Additional methods of test
Method for determination of apparent
density after compaction of precipitated
calcium carbonate
Specification for sodium carbonate
(technical grades)
Specification for sodium silicates
Ammonium nitrate -- General introduction
Ammonium nitrate -- Method for
determination of ammoniacal nitrogen
content
Ammonium nitrate -- Method for
determination of matter soluble in diethyl
ether
Ammonium nitrate -- Method for
determination of inorganic matter and grit
insoluble in water
Ammonium nitrate -- Method for
determination of total nitrogen content
Ammonium nitrate -- Method for
measurement of pH value
Ammonium nitrate -- Method for
determination of sulphated ash
Ammonium nitrate -- Method for
determination of matter insoluble in water
Ammonium nitrate -- Method for
determination of water content
Ammonium nitrate -- Methods for
determination of nitrite content
BS 4267 : Part 8
BS 4267 : Part 9
BS 4427 : Part 1
BS 4427 : Part 10
BS 4427 : Part 11
BS 4427 : Part 12
BS 4427 : Part 13
BS 4427 : Part 14
BS 4427 : Part 15
Ammonium nitrate -- Methods for
determination of chloride content
Ammonium nitrate -- Method for
determination of striphate content
Methods of test for sodium
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate
(tetrasodium pyrophosphate) for industrial
use -- Determination of matter insoluble in
water in sodium tripolyphosphate
Methods of test for sodium
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate
(tetrasodium pyrophosphate) for industrial
use -- Determination of total phosphorus
(V) oxide content : quinoline
phosphomolybdate gravimetric method
Methods of test for sodium
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate
(tetrasodium pyrophosphate) for industrial
use -- Separation by column
chromatography and determination of the
different phosphate forms
Methods of test for sodium
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate
(tetrasodium pyrophosphate) for industrial
use -- Condensed phosphates for industrial
use (including foodstuffs) - determination
of arsenic content - silver di
Methods of test for sodium
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate
(tetrasodium pyrophosphate) for industrial
use -- Condensed phosphates for industrial
use (including foodstuffs) - determination
of calcium content - flame ato
Methods of test for sodium
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate
(tetrasodium pyrophosphate) for industrial
use -- Condensed phosphates for industrial
use (including foodstuffs) : determination
of chloride content
Methods of test for sodium
BS 4993:Part 1
BS 4993:Part 10
BS 4993:Part 2
BS 4993:Part 3
BS 4427 : Part 2
BS 4427 : Part 3
BS 4427 : Part 5
BS 4427 : Part 6
BS EN ISO 11127-1
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate
(tetrasodium pyrophosphate) for industrial
use -- Condensed phosphates for industrial
use (including foodstuffs) - determination
of oxides of nitrogen content
Methods of test for aluminium fluoride for
industrial use -- Determination of fluorine
content
Methods of test for aluminium fluoride for
industrial use -- Determination of
phosphorus content
Methods of test for aluminium fluoride for
industrial use -- Determination of iron
content
Methods of test for aluminium fluoride for
industrial use -- Determination of silica
content
Methods of test for sodium
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate
(tetrasodium pyrophosphate) for industrial
use -- Measurement of pH value of sodium
tripolyphosphate
Methods of test for sodium
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate
(tetrasodium pyrophosphate) for industrial
use -- Condensed phosphates for industrial
use (including foodstuffs) : determination
of iron content
Methods of test for sodium
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate
(tetrasodium pyrophosphate) for industrial
use -- Determination of particle size
distribution
Methods of test for sodium
tripolyphosphate (pentasodium
triphosphate) and sodium pyrophosphate
(tetrasodium pyrophosphate) for industrial
use -- Estimation of pyrophosphate content
of sodium pyrophosphate
BS EN ISO 11127-1 Preparation of steel
substrates before application of paints and
related products - Test methods for non-
BS 4993:Part 4
BS 4993:Part 5
BS 4993:Part 6
BS 4993:Part 7
BS 4993:Part 8
BS 4993:Part 9
BS 5050
BS 5050:Part 8
BS 5072:Part 1
BS 5072:Part 2
BS 5072:Part 3
BS 5072:Part 4
BS 5072:Part 5
BS 5072:Part 6
BS 5072:Part 7
BS 5072:Part 8
metallic blast-cleaning abrasives - Part 1 :
Sampling
Methods of test for aluminium fluoride for
industrial use -- Preparation and storage of
test samples
Methods of test for aluminium fluoride for
industrial use -- Determination of moisture
content (Karl Fischer method)
Methods of test for aluminium fluoride for
industrial use -- Determination of moisture
content (gravimetric method)
Methods of test for aluminium fluoride for
industrial use -- Determination of sodium
content
Methods of test for aluminium fluoride for
industrial use -- Determination of sulphate
content
Methods of test for aluminium fluoride for
industrial use -- Determination of sulphur
content (X-ray fluorescence spectrometric
method)
Methods of test for cryolite
Methods of test for cryolite -Determination of calcium content
Methods of test for sodium fluoride for
industrial use -- Determination of waterinsoluble matter
Methods of test for sodium fluoride for
industrial use -- Determination of moisture
content
Methods of test for sodium fluoride for
industrial use -- Determination of fluorine
content
Methods of test for sodium fluoride for
industrial use -- Preparation and storage of
test samples
Methods of test for sodium fluoride for
industrial use -- Determination of iron
content
Methods of test for sodium fluoride for
industrial use -- Determination of silica
content
Methods of test for sodium fluoride for
industrial use -- Determination of soluble
sulphates content
Methods of test for sodium fluoride for
BS 6070 : Part 0
BS 6070 : Part 1
BS 6070 : Part 2
BS EN ISO 11127-1
BS 6070 : Part 3
BS 6070 : Part 4
BS 6070 : Part 6
BS 6070 : Part 7
BS 6092 : Part 0
BS EN ISO 11126-8
BS 6092 : Part 1
BS 6092 : Part 10
BS 6092 : Part 11
industrial use -- Determination of chlorides
content
Methods of sampling and test for sodium
carbonate for industrial use -- General
introduction
Methods of sampling and test for sodium
carbonate for industrial use -Determination of total soluble alkali
content
Methods of sampling and test for sodium
carbonate for industrial use -Determination of chloride content
BS EN ISO 11127-1 Preparation of steel
substrates before application of paints and
related products - Test methods for nonmetallic blast-cleaning abrasives - Part 1 :
Sampling
Methods of sampling and test for sodium
carbonate for industrial use -Determination of non-volatile matter
Methods of sampling and test for sodium
carbonate for industrial use -Determination of matter insoluble in water
Methods of sampling and test for sodium
carbonate for industrial use -Determination of pouring density
Methods of sampling and test for sodium
carbonate for industrial use -Determination of copper content
Methods of sampling and test for sodium
and potassium silicates for industrial use -General introduction
BS EN ISO 11126-8 Preparation of steel
substrates before application of paints and
related products - Specifications for nonmetallic blast-cleaning abrasives - Part 8 :
Olivine sand
Methods of sampling and test for sodium
and potassium silicates for industrial use -Determination of solution density at 20øC
Methods of sampling and test for sodium
and potassium silicates for industrial use -Determination of matter insoluble in water
Methods of sampling and test for sodium
and potassium silicates for industrial use -Determination of chloride content of
BS 6092 : Part 12
BS 6092 : Part 2
BS 6092 : Part 3
BS 6092 : Part 4
BS 6092 : Part 5
BS 6092 : Part 7
BS 6092 : Part 8
BS 6092 : Part 9
BS 7319 : Part 1
BS 6092 : Part 6
BS 7319 : Part 10
BS 7319 : Part 11
BS 7319 : Part 12
BS 7319 : Part 2
sodium metasilicate
Methods of sampling and test for sodium
and potassium silicates for industrial use -Limit test for sulphate content of sodium
metasilicate
Methods of sampling and test for sodium
and potassium silicates for industrial use -Determination of total solids content
Methods of sampling and test for sodium
and potassium silicates for industrial use -Determination of silica content
(gravimetric method)
Methods of sampling and test for sodium
and potassium silicates for industrial use -Determination of carbonate content
Methods of sampling and test for sodium
and potassium silicates for industrial use -Determination of total alkali content
Methods of sampling and test for sodium
and potassium silicates for industrial use -Determination of silica content (titrimetric
method)
Methods of sampling and test for sodium
and potassium silicates for industrial use -Determination of sulphate content
Methods of sampling and test for sodium
and potassium silicates for industrial use -Determination of iron content
Analysis of sodium chloride for industrial
use -- Method for determination of sodium
chloride content
Methods of sampling and test for sodium
and potassium silicates for industrial use -Preparation of solutions of not readily
soluble products and determination of
matter insoluble in water
Analysis of sodium chloride for industrial
use -- Method for determination of pH and
total alkalinity
Analysis of sodium chloride for industrial
use -- Method for determination of iron
content
Analysis of sodium chloride for industrial
use -- Methods for determination of anticaking additives content of salt for food use
Analysis of sodium chloride for industrial
BS 7319 : Part 3
BS 7319 : Part 4
BS 7319 : Part 5
BS 7319 : Part 6
BS 7319 : Part 7
BS 7319 : Part 8
BS 7319 : Part 9
BS 4431
BS 5207
BS 5209
BS 4524
BS 4591
BS 4630
BS 3769
BS 3770
BS 1994
BS 4774
BS 4926
use -- Method for determination of
moisture content
Analysis of sodium chloride for industrial
use -- Method for determination of matter
insoluble in water or in acid
Analysis of sodium chloride for industrial
use -- Method for determination of sulphate
content
Analysis of sodium chloride for industrial
use -- Method for determination of calcium
and magnesium contents
Analysis of sodium chloride for industrial
use -- Method for determination of
cadmium content
Analysis of sodium chloride for industrial
use -- Method for determination of copper
content
Analysis of sodium chloride for industrial
use -- Method for determination of lead
content
Analysis of sodium chloride for industrial
use -- Method for determination of mercury
content
Methods of sampling and test for liquefied
anhydrous ammonia
Specification for sulphur hexafluoride for
electrical equipment
Code of practice for the testing of sulphur
hexafluoride taken from electrical
equipment
Method for determination of residue on
evaporation on a water bath
Method for determination of distillation
characteristics of organic liquids (other
than petroleum products)
Specification for tributyltin oxide
(di(tributyltin) oxide)
Specification for copper naphthenate and
copper naphthenate concentrates
Specification for zinc naphthenate and zinc
naphthenate concentrates
Specification for dichloromethane
(methylene chloride)
Methods of test for chloroform for
industrial use
Specification for dichlorophen
BS 5598 : Part 1
BS 5598 : Part 10
BS 5598 : Part 2
BS 5598 : Part 3
BS 5598 : Part 11
BS 5598 : Part 4
BS 5598 : Part 5
BS 5598 : Part 6
BS 5598 : Part 7
BS 5598 : Part 8
BS 5598 : Part 9
BS 576: Part 1
BS 576: Part 2
BS 4341
BS 6947
Methods of sampling and test for
halogenated hydrocarbons -- Sampling of
liquid products
Methods of sampling and test for
halogenated hydrocarbons -- Determination
of impurities in methyl chloride, gas
chromatographic method
Methods of sampling and test for
halogenated hydrocarbons -- Sampling of
liquefied gases
Methods of sampling and test for
halogenated hydrocarbons -- Determination
of residue on evaporation
Methods of sampling and test for
halogenated hydrocarbons -- Determination
of 'inert' gas content of
chlorofluorohydrocarbons, gas
chromatographic method, general
principles
Methods of sampling and test for
halogenated hydrocarbons -- Determination
of acidity, titrimetric method
Methods of sampling and test for
halogenated hydrocarbons -- Determination
of cloud point
Methods of sampling and test for
halogenated hydrocarbons -- Determination
of acidity of fluorochlorinated
hydrocarbons
Methods of sampling and test for
halogenated hydrocarbons -- Methods of
test for methyl chloride and ethyl chloride
Methods of sampling and test for
halogenated hydrocarbons -- Determination
of non-volatile residue in fluorinated
hydrocarbons
Methods of sampling and test for
halogenated hydrocarbons -- Determination
of boiling range of chlorofluorinated
hydrocarbons
Acetic acid for industrial use -Specification for acetic acid
Acetic acid for industrial use -- Methods of
test for acetic acid
Methods of test for formic acid
Specification for acid oils and recovered
BS 2068
BS 506 : Part 1
BS 506 : Part 2
BS 507
BS 508 : Part 1
BS 508 : Part 2
BS 549
BS 579
BS 1595 : Part 1
BS 1595 : Part 2
BS 1835
BS 2621-5
BS 2713
BS 3591
BS 4583
BS 5711 : Part 0
BS 5711 : Part 1
BS 5711 : Part 10
BS 5711 : Part 11
BS 5711 : Part 12
BS 5711 : Part 13
BS 5711 : Part 14
BS 5711 : Part 15
BS 5711 : Part 16
fatty acid distillates
Specification for acetic anhydride
Methanol for industrial use -- Specification
for methanol
Methanol for industrial use -- Methods of
test
Specification for ethanol for industrial use
Butan-1-ol for industrial use -Specification for butan-1-ol
Butan-1-ol for industrial use -- Methods of
test
Specification for diacetone alcohol
Specification for diethyl ether (technical)
Propan-2-ol (isopropyl alcohol) for
industrial use -- Specification for propan-2ol (isopropyl alcohol)
Propan-2-ol (isopropyl alcohol) for
industrial use -- Methods of test
Specification for 2-ethylhexan-1-ol for
industrial use
Specifications for glycerol
Specification for 2-ethoxyethanol (ethylene
glycol monoethyl ether)
Specification for industrial methylated
spirits
Methods of test for higher alcohols for
industrial use
Methods of sampling and test for glycerol - General introduction
Methods of sampling and test for glycerol - Samples and test methods : general
Methods of sampling and test for glycerol - Determination of arsenic content : silver
diethyldithiocarbamate method
Methods of sampling and test for glycerol - Determination of propane-1,3-diol
content : gas chromatographic method
Methods of sampling and test for glycerol - Determination of chloride content
Methods of sampling and test for glycerol - Limit test for chloride
Methods of sampling and test for glycerol - Limit test for organic chloride
Methods of sampling and test for glycerol - Determination of heavy metals content
Methods of sampling and test for glycerol -
BS 5711 : Part 17
BS 5711 : Part 18
BS 5711 : Part 19
BS 5711 : Part 2
BS 5711 : Part 20
BS 5711 : Part 21
BS 5711 : Part 22
BS 5711 : Part 3
BS 5711 : Part 4
BS 5711 : Part 5
BS 5711 : Part 6
BS 5711 : Part 7
BS 5711 : Part 8
BS 5711 : Part 9
BS 6392 : Part 0
BS 6392 : Part 1
BS 6392 : Part 2
- Determination of iron content
Methods of sampling and test for glycerol - Limit test for lead
Methods of sampling and test for glycerol - Detection of sugars
Methods of sampling and test for glycerol - Assessment of odour
Methods of sampling and test for glycerol - Methods of sampling
Methods of sampling and test for glycerol - Test for reducing substances
Methods of sampling and test for glycerol - Determination of saponification
equivalent
Methods of sampling and test for glycerol - Additional methods of test (nonspecification)
Methods of sampling and test for glycerol - Determination of glycerol content
Methods of sampling and test for glycerol - Determination of density and relative
density
Methods of sampling and test for glycerol - Determination of alkalinity or acidity :
volumetric method
Methods of sampling and test for glycerol - Determination of ash : gravimetric
method
Methods of sampling and test for glycerol - Determination of sulphated ash :
gravimetric method
Methods of sampling and test for glycerol - Determination of water content : Karl
Fischer method
Methods of sampling and test for glycerol - Calculation of Matter (Organic) NonGlycerol (MONG)
Testing of ethanol for industrial use -General introduction
Testing of ethanol for industrial use -Method for detection of alkalinity or
determination of acidity to phenolphthalein
Testing of ethanol for industrial use -Method for determination of carbonyl
compounds content present in small
amounts (photometric method)
BS 6392 : Part 3
Testing of ethanol for industrial use -Method for determination of carbonyl
compounds content present in moderate
amounts (titrimetric method)
BS 6392 : Part 4
Testing of ethanol for industrial use -Method for determination of aldehydes
content
BS 6392 : Part 5
Testing of ethanol for industrial use -Method of test for miscibility with water
BS 6392 : Part 6
Testing of ethanol for industrial use -Method for determination of methanol
content [0.01% (V/V) to 0.20% (V/V)]
(photometric method)
BS 6392 : Part 7
Testing of ethanol for industrial use -Method for determination of methanol
content [0.10% (V/V) to 1.50% (V/V)]
(visual colorimetric method)
BS 6392 : Part 8
Testing of ethanol for industrial use -Method for determination of esters content
BS 6392 : Part 9
Testing of ethanol for industrial use -Method for determination of permanganate
time
BS 551
Specification for butyl acetate for industrial
use
BS 552
Specification for amyl acetate
BS CECC 20000
Harmonized system of quality assessment
for electronic components : generic
specification : semiconductor
optoelectronic and liquid crystal devices
BS 553
Specification for ethyl acetate for industrial
use
BS 573, 574, 1995, 1996, 2535, 2536, 3647 Specifications for plasticizer esters
BS 1834
Specification for isopropyl acetate
BS 4727 : Part 1 : Group 08
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Piezoelectric devices for frequency
control and selection
BS 4024
Specification for pentachlorophenyl laurate
BS 5069:Part 1
Dimensions of piezoelectric devices -Specification for standard outlines and pin
connections for quartz crystal units
BS 5069:Part 2
Dimensions of piezoelectric devices -Specification for standard outlines for
piezoelectric filters
BS EN ISO 11126-8
BS 4835
BS 509 : Part 1
BS 509 : Part 2
BS 7681 : Part 1
BS 7681 : Part 2
BS 7681 : Part 3
BS 1940
BS 1941
BS 3175
BS 4522
BS 7681 : Part 4
BS EN ISO 11126-6
BS EN ISO 11126-8 Preparation of steel
substrates before application of paints and
related products - Specifications for nonmetallic blast-cleaning abrasives - Part 8 :
Olivine sand
Methods of test for plasticizer esters
Acetone for industrial use -- Specification
for acetone
Acetone for industrial use -- Methods of
test
Measurement of quartz crystal unit
parameters by zero phase technique in a ãnetwork -- Basic method for the
measurement of resonance frequency and
resonance resistance of quartz crystal units
by zero phase technique in a ã-network
Measurement of quartz crystal unit
parameters by zero phase technique in a ãnetwork -- Phase offset method for
measurement of motional capacitance of
quartz crystal units
Measurement of quartz crystal unit
parameters by zero phase technique in a ãnetwork -- Basic method for the
measurement of two-terminal parameters of
quartz crystal units up to 200 MHz by
phase technique in a ã-network with
compensation of the parallel c
Specification for butanone (ethyl methyl
ketone) for industrial use
Specification for 4-methylpentan-2-one
(isobutyl methyl ketone) for industrial use
Specification for pentachlorophenol
Method for determination of absolute
density at 20øC of liquid chemical products
for industrial use
Measurement of quartz crystal unit
parameters by zero phase technique in a ãnetwork -- Method for the measurement of
the load resonance frequency
f<inf>L</inf>, load resonance resistance
R<inf>L</inf> and the calculation of other
derived values of quartz
BS EN ISO 11126-6 Preparation of steel
substrates before application of paints and
related products - Specifications for non-
BS EN ISO 11126-6
BS 5935
BS 5935
BS ISO 7176-4
BS IEC 60874-14-5
BS EN 61300-3-4
BS ISO/IEC 13888-1
BS ISO/IEC 13888-3
BS IEC 61163-2
BS ISO/IEC 9796-2
BS ISO/IEC 9798-1
BS 4140 : Part 0
metallic blast cleaning abrasives - Part 6 :
Iron furnace slag
BS EN ISO 11126-6 Preparation of steel
substrates before application of paints and
related products - Specifications for nonmetallic blast cleaning abrasives - Part 6 :
Iron furnace slag
BS 5935 Specification for Toroidal stripwound cores made of magnetically soft
material
BS 5935 Specification for Toroidal stripwound cores made of magnetically soft
material
BS ISO 7176-4 Wheelchairs - Part 4 :
Energy consumption of electric
wheelchairs and scooters for determination
of theoretical distance range
BS IEC 60874-14-5 Connectors for optical
fibres and cables - Part 14-5 : Detail
specification for fibre optic connector type
SC-PC untuned terminated to single-mode
fibre type B1
BS EN 61300-3-4 Fibre optic
interconnecting devices and passive
components - Basic test and measurement
procedures - Part 3-4 : Examination and
measurements - Attenuation
BS ISO/IEC 13888-1 Information
technology - Security techniques - Nonrepudiation - Part 1 : General
BS ISO/IEC 13888-3 Information
technology - Security techniques - Nonrepudiation - Part 3 : Mechanisms using
asymmetric techniques
BS IEC 61163-2 Reliability stress
screening - Part 2 : Electronic components
BS ISO/IEC 9796-2 Information
technology - Security techniques - Digital
signature schemes giving message recovery
- Part 2 : Mechanisms using a hashfunction
BS ISO/IEC 9798-1 Information
technology - Security techniques - Entity
authentication - Part 1 : General
Methods of test for aluminium oxide -General introduction
BS 4140 : Part 1
BS 4140 : Part 10
BS 4140 : Part 11
BS ISO/IEC 10116
PAS 30
BS ISO 8529-3
BS ISO 4010
BS EN 61897
BS EN 61854
BS EN 55022
BS EN 55022
BS SP 172
BS EN 1540
BS EN 1540
BS EN 50133-1
BS 7872
BS 7872
Methods of test for aluminium oxide -Preparation and storage of test samples
Methods of test for aluminium oxide -Determination of untamped density
Methods of test for aluminium oxide -Determination of sodium content
BS ISO/IEC 10116 Information technology
- Security techniques - Modes of operation
for an n-bit block cipher
PAS 30 Outdoor recreational multi-sports
equipment - Specification
BS ISO 8529-3 Reference neutron
radiations - Part 3 : Calibration of area and
personal dosimeters and determination of
their response as a function of neutron
energy and angle of incidence
BS ISO 4010 Diesel engines - Calibrating
nozzle, delay pintle type
BS EN 61897 Overhead lines Requirements and tests for Stockbridge
type aeolian vibration dampers
BS EN 61854 Overhead lines Requirements and tests for spacers
BS EN 55022 Information technology
equipment - Radio disturbance
characteristics - Limits and methods of
measurement
BS EN 55022 Information technology
equipment - Radio disturbance
characteristics - Limits and methods of
measurement
BS SP 172 Aerospace - Rivets, solid, in
aluminium or aluminium alloys Procurement specification
BS EN 1540 Workplace atmospheres Terminology
BS EN 1540 Workplace atmospheres Terminology
BS EN 50133-1 Alarm systems - Access
control systems for use in security
applications - Part 1 : System requirements
BS 7872 Code of practice for Operation of
cash-in-transit services (collection and
delivery)
BS 7872 Code of practice for Operation of
cash-in-transit services (collection and
BS 4140 : Part 12
BS 4140 : Part 13
BS 4140 : Part 14
BS 4140 : Part 16
BS EN 1665
BS EN 50136-2-1
BS EN ISO 8290
BS EN 61800-1
BS EN 60335-2-79
BS 4140 : Part 17
BS 4140 : Part 18
BS 4140 : Part 19
BS EN ISO 9905
BS 4140 : Part 2
BS 4140 : Part 20
BS 4140 : Part 21
BS 4140 : Part 22
BS 4140 : Part 23
delivery)
Methods of test for aluminium oxide -Determination of vanadium content
Methods of test for aluminium oxide -Preparation of sample solution by treatment
with hydrochloric acid under pressure
Methods of test for aluminium oxide -Determination of calcium content
Methods of test for aluminium oxide -Determination of zinc content by flame
atomic absorption
BS EN 1665 Hexagon bolts with flange Heavy series
BS EN 50136-2-1 Alarm systems - Alarm
transmission systems and equipment - Part
2-1 : General requirements for alarm
transmission equipment
BS EN ISO 8290 Vitreous and porcelain
enamels - Determination of resistance to
sulfuric acid at room temperature
BS EN 61800-1 Adjustable speed electrical
power drive systems - Part 1 : Rating
specifications for low voltage adjustable
speed d.c. power drive systems
BS EN 60335-2-79 Safety of household
and similar electrical appliances - Part 2-79
: Particular requirements for high pressure
cleaners and steam cleaners for, industrial
and commercial use
Methods of test for aluminium oxide -Determination of fluorine content
Methods of test for aluminium oxide -Determination of phosphorus content
Methods of test for aluminium oxide -Determination of boron content
BS EN ISO 9905 Technical specifications
for centrifugal pumps - Class I
Methods of test for aluminium oxide -Determination of loss of mass at 300°C
Methods of test for aluminium oxide -Sampling
Particle size analysis
Methods of test for aluminium oxide -Determination of manganese content
Methods of test for aluminium oxide -Determination of specific surface area by
BS 4140 : Part 24
BS 4140 : Part 3
BS EN 167000
BS 4140 : Part 4
BS 4140 : Part 5
BS 4140 : Part 6
BS 4140 : Part 8
BS 4140 : Part 9
BS 6043 : Part 1 : Section 1.1
BS 6043 : Part 1 : Section 1.10
BS 6043 : Part 1 : Section 1.11
BS 6043 : Part 1 : Section 1.13
BS ISO 9102
BS 7403 : Part 1
nitrogen adsorption (single-point method)
Methods of test for aluminium oxide -Determination of fine particle size
distribution (method using electroformed
sieves)
Methods of test for aluminium oxide -Determination of loss of mass at 1000øC
and 1200øC
Harmonized system of quality assessment
for electronic components. Generic
specification : piezoelectric filters
Methods of test for aluminium oxide -Preparation of sample solution by alkaline
fusion
Methods of test for aluminium oxide -Determination of silica content
Methods of test for aluminium oxide -Determination of titanium content
Methods of test for aluminium oxide -Determination of absolute density using a
pyknometer
Methods of test for aluminium oxide -Measurement of the angle of repose
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode pitch -- Sampling
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode pitch -Determination of volatile matter content
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode pitch -Determination of the atomic C/H ratio of
the quinoline-insoluble material
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode pitch -Determination of sulfur content (routine
method)
BS ISO 9102 Diesel engines - Screw-in
injection nozzle holders types 24, 25, 26
and 26.1
BS 7403 : Part 1 Full-flow lubricating oil
filters for internal combustion engines Part 1 : Methods of test for differential
BS 6043 : Part 1 : Section 1.2
BS 6043 : Part 1 : Section 1.3
BS 6043 : Part 1 : Section 1.4
BS 6043 : Part 1 : Section 1.5
BS 6043 : Part 1 : Section 1.6
BS 6043 : Part 1 : Section 1.7
BS 6043 : Part 1 : Section 1.8
BS 6043 : Part 1 : Section 1.9
BS 6043 : Part 2 : Section 2.1
BS 6043 : Part 2 : Section 2.11
pressure/flow characteristics
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode pitch -Determination of water content (Dean and
Stark method)
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode pitch -Determination of softening point (ring and
ball method)
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode pitch -Determination of content of
tolueneinsoluble material
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode pitch -Determination of content of quinolineinsoluble material
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode pitch -Determination of coking value
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode pitch -Determination of apparent density
(buoyancy method)
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode pitch -Determination of ash
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode pitch -Determination of sulphur content (bomb
method)
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -- Sampling
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of volatile matter content
BS 4364
BS 4366
BS 5355
BS 6202
BS 6043 : Part 2 : Section 2.12
BS 6043 : Part 2 : Section 2.2
BS 6043 : Part 2 : Section 2.3
BS 6043 : Part 2 : Section 2.6
BS 6043 : Part 2 : Section 2.7
BS 6043 : Part 2 : Section 2.8
BS 6043 : Part 4 : Section 4.0
BS 6043 : Part 4 : Section 4.1
BS 6043 : Part 4 : Section 4.10
Specification for industrial oxygen
Specification for industrial nitrogen
Specification for filling ratios and
developed pressures for liquefiable and
permanent gases
Glossary of terms for cleaning equipment
for air or other gases
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of particle size distribution
of fine coke
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of ash content of green and
calcined cokes
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of trace elements by flame
atomic absorption spectrometry
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of the density in xylene of
calcined cokes
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of the apparent oil content
of calcined cokes (gravimetric method)
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of oil content by solvent
extraction of calcined coke
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -General introduction
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -Methods of sampling
Methods of sampling and test for
BS 6043 : Part 4 : Section 4.11
BS 6043 : Part 4 : Section 4.12
BS 6043 : Part 4 : Section 4.13
BS 6043 : Part 4 : Section 4.2
BS 6043 : Part 4 : Section 4.3
BS 5607
BS 7114: Part 1
BS 7114: Part 2
BS 7114: Part 3
BS 6043 : Part 4 : Section 4.4
BS 6043 : Part 4 : Section 4.5
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -Determination of the apparent porosity of
baked rammed paste
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -Determination of the thermal expansion of
baked rammed paste
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -Determination of the thermal conductivity
of baked rammed paste
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -Determination of ash of baked rammed
paste
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -Determination of effective binder content
and aggregate content by extraction with
quinoline; determination of aggregate size
distribution
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -Determination of aggregate size
distribution after extraction by
dichloromethane
Code of practice for safe use of explosives
in the construction industry
Fireworks -- Classification of fireworks
Fireworks -- Specification for fireworks
Fireworks -- Methods of test for fireworks
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -Determination of volatile matter content of
unbaked paste
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -Determination of water content of unbaked
BS 6043 : Part 4 : Section 4.6
BS 6043 : Part 4 : Section 4.7
BS 6043 : Part 4 : Section 4.8
BS 6043 : Part 4 : Section 4.9
BS EN 169101
BS EN 268
BS 9120
BS 7403 : Part 2
BS 9125
BS 9121
BS 1545
BS 1715 : Part 1
pastes
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -Determination of maximum rammed
apparent density of unbaked paste
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -Preparation of baked rammed test pieces
and determination of baked apparent
density, change in volume and loss in mass
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -Determination of electrical resistivity of
baked rammed paste
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Cold ramming pastes -Determination of the cold crushing strength
of baked rammed paste
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification :
quartz crystal controlled oscillators
(capability approval)
Specification for propellants for
commercial ammunition. Requirements
and test methods
Specification for radio interference
suppression filters of assessed quality :
generic data and methods of test
BS 7403 : Part 2 Full-flow lubricating oil
filters for internal combustion engines Part 2 : Method of test for element by-pass
valve characteristics
Specification for capability approval of
manufacturers of passive radio interference
suppression filter units of assessed quality
generic data
Blank detail specification for radio
interference suppression filters of assessed
quality. Basic and full assessment levels
Specification for liquid toilet soap
Analysis of soaps -- General introduction,
BS 1715 : Part 2 : Section 2.1
BS 7403 : Part 3
BS 1715 : Part 2 : Section 2.11
BS 1715 : Part 2 : Section 2.2
BS 1715 : Part 2 : Section 2.3
BS EN 133200
BS 1715 : Part 2 : Section 2.4
BS 1715 : Part 2 : Section 2.5
BS 1715 : Part 2 : Section 2.6
BS 1715 : Part 2 : Section 2.7
BS 1715 : Part 2 : Section 2.8
BS 1715 : Part 2 : Section 2.9
BS 1911
BS 1912
sampling, and test for presence of synthetic
anionic-active surface active agents
Analysis of soaps -- Quantitative test
methods -- Method for determination of
total alkali content and total fatty matter
content
BS 7403 : Part 3 Full-flow lubricating oil
filters for internal combustion engines Part 3 : Methods of test for resistance to
high differential pressure and to elevated
temperature
Analysis of soaps -- Quantitative test
methods -- Method for determination of
ethanol-insoluble matter content
Analysis of soaps -- Quantitative test
methods -- Method for determination of
total free alkali content
Analysis of soaps -- Quantitative test
methods -- Method for determination of
free caustic alkali content
Harmonized system of quality assessment
for electronic components. Sectional
specification : passive filter units for
electromagnetic interference suppression
(filters for which safety tests are required)
Analysis of soaps -- Quantitative test
methods -- Method for determination of
free fatty acids content
Analysis of soaps -- Quantitative test
methods -- Method for determination of
unsaponifiable, unsaponified, and
unsaponified saponifiable matter contents
Analysis of soaps -- Quantitative test
methods -- Method for determination of
moisture and volatile matter content
Analysis of soaps -- Quantitative test
methods -- Method for determination of
chloride content
Analysis of soaps -- Quantitative test
methods -- Method for determination of
glycerol content
Analysis of soaps -- Quantitative test
methods -- Method for determination of
EDTA content
Specification for hard soap
Specification for soap flakes
BS 1913
BS 1914
BS EN 167000
BS 3762 : Part 0
BS 3762 : Part 1
BS 3762 : Part 3 : Section 3.1
BS 3762 : Part 3 : Section 3.10
DD 158
BS 3762 : Part 3 : Section 3.11
BS 3762 : Part 3 : Section 3.12
BS 3762 : Part 3 : Section 3.13
BS 3762 : Part 3 : Section 3.14
BS 3762 : Part 3 : Section 3.15
BS 3762 : Part 3 : Section 3.16
BS 3762 : Part 3 : Section 3.17
BS 3762 : Part 3 : Section 3.18
BS 3762 : Part 3 : Section 3.19
Specification for soft soap
Specification for toilet soap
Harmonized system of quality assessment
for electronic components. Generic
specification : piezoelectric filters
Analysis of formulated detergents -General introduction
Analysis of formulated detergents -Methods of sample division
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of anionic-active matter
content
Analysis of formulated detergents -Quantitative test methods -- Methods for
determination of short-chain
alkylbenzenesulphonates content
Filters for mains signalling systems
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of free formaldehyde content
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of ammonia content
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of total boron content
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of carbonate content
Analysis of formulated detergents -Quantitative test methods -- Method for
estimation of carboxymethylcellulose
content
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of chloride content
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of active oxygen content
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of chlorine oxidizing agents
content
Analysis of formulated detergents -Quantitative test methods -- Method for
BS 7403 : Part 4
BS 7543
BS 3762 : Part 3 : Section 3.2
BS 4584 : Part 103 : Section 103.3
BS 3762 : Part 3 : Section 3.21
BS 3762 : Part 3 : Section 3.22
BS 7543
BS 3762 : Part 3 : Section 3.23
BS 3762 : Part 3 : Section 3.24
BS 3762 : Part 3 : Section 3.25
BS EN ISO 8861
BS ISO 13476
determination of total phosphorus (V)
oxide content
BS 7403 : Part 4 Full-flow lubricating oil
filters for internal combustion engines Part 4 : Methods of test for initial particle
retention efficiency, life and cumulative
efficiency (gravimetric method)
BS 7543 Guide to Durability of buildings
and building elements, products and
components
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of hydrolyzable and nonhydrolyzable anionic-active matter content
after hydrolysis under alkaline conditions
Metal-clad base materials for printed
wiring boards -- Specification for
permanent polymer coating materials
(solder resist) for use in the fabrication of
printed boards
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of total silica content
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of inorganic sulphate content
BS 7543 Guide to Durability of buildings
and building elements, products and
components
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of chelating agents content
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of low molecular mass
alcohols content
Analysis of formulated detergents -Quantitative test methods -- Methods for
determination of water and volatile matter
content
BS EN ISO 8861 Shipbuilding - Engineroom ventilation in diesel-engined ships Design requirements and basis of
calculations
BS ISO 13476 Road vehicles - Ignition
coils - Electrical characteristics and test
BS 3762 : Part 3 : Section 3.5
BS 3762 : Part 3 : Section 3.7
BS 3762 : Part 3 : Section 3.8
BS 3762 : Part 3 : Section 3.9
BS 3762 : Part 3 : Section 3.6
BS 6043 : Part 1 : Section 1.6
BS 3762 : Part 4 : Section 4.1
BS 3762 : Part 4 : Section 4.2
BS 4088 : Part 1 : Section 1.1
BS 4088 : Part 1 : Section 1.2
BS 4088 : Part 1 : Section 1.3
BS 4088 : Part 2
BS 4088 : Part 4
methods
Analysis of formulated detergents -Quantitative test methods -- Methods for
determination of total organic matter
content
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of total non-ionic matter
content
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of alkanolamides content
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of soap content
Analysis of formulated detergents -Quantitative test methods -- Method for
determination of matter soluble in light
petroleum
BS 6043 : Part 1 : Section 1.6 Methods of
Sampling and test for carbonaceous
materials used in aluminium manufacture Part 1 : Electrode pitch - Section 1.6 :
Determination of coking value
Analysis of formulated detergents -Physical test methods -- Method for
determination of clear point of liquid
detergents
Analysis of formulated detergents -Physical test methods -- Method for
determination of apparent bulk density
Carpet cleaning products -- Methods of
sampling and test -- General methods for
formulations used in liquid form
Carpet cleaning products -- Methods of
sampling and test -- Determination of
cleaning performance of formulations
designed for use with spray extraction
machines
Carpet cleaning products -- Methods of
sampling and test -- General methods for
impregnated powder formulations
Carpet cleaning products -- Specification
for high foam formulations used in liquid
form
Carpet cleaning products -- Specification
BS 4405
BS 4727 : Part 1 : Group 11
BS 4498
BS 6043 : Part 1 : Section 1.6
BS 6096 : Part 1
BS 5610
BS 6584
BS 6585
BS 6221 : Part 1
BS 6829 : Part 0
BS 6221 : Part 12
BS 6829 : Part 1 : Section 1.1
BS 6829 : Part 1 : Section 1.3
BS EN ISO 140-1
BS EN ISO 140-8
for impregnated powder formulations
Specification for liquid soap
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Printed circuits
Method for determination of the Kappa
number of pulp (degree of delignification)
BS 6043 : Part 1 : Section 1.6 Methods of
Sampling and test for carbonaceous
materials used in aluminium manufacture Part 1 : Electrode pitch - Section 1.6 :
Determination of coking value
Marking inks and solder resist coating
materials for printed circuits -- Methods of
test
Surface Active agents - detergents for
washing fabrics - guide for comparative
testing of performance
Guide for comparative testing of
performance of detergents for hand
dishwashing
Guide for comparative testing of
performance of detergents for domestic
machine dishwashing
Printed wiring boards -- Guide for the
specification writer
Analysis of surface active agents (raw
materials) -- General introduction
Printed wiring boards -- Specification for
mass lamination panels (semimanufactured multilayer printed boards)
Analysis of surface active agents (raw
materials) -- General methods -- Method
for determination of mineral sulphate
content
Analysis of surface active agents (raw
materials) -- General methods -- Method
for determination of alkalinity
BS EN ISO 140-1 Acoustics Measurement of sound insulation in
buildings and of building elements - Part 1
: Requirements for laboratory test facilities
with suppressed flanking transmission
BS EN ISO 140-8 Acoustics -
BS 6829 : Part 1 : Section 1.2
BS 6829 : Part 1 : Section 1.5
BS 6829 : Part 1 : Section 1.6
BS 6829 : Part 2 : Section 2.1
BS 6829 : Part 2 : Section 2.2
BS ISO 11564
BS ISO 11632
BS 6829 : Part 2 : Section 2.3
BS 6829 : Part 3 : Section 3.1
BS ISO 11468
DD ENV 12936
Measurement of sound insulation in
buildings and of building elements - Part 8
: Laboratory measurements of the reduction
of transmitted impact noise by floor
coverings on a heavyweight standard floor
Analysis of surface active agents (raw
materials) -- General methods -- Method
for determination of free alkalinity or free
acidity
Analysis of surface active agents (raw
materials) -- General methods -- Methods
for determination of water content
Analysis of surface active agents (raw
materials) -- General methods -- Method
for determination of solubility in water
Analysis of surface active agents (raw
materials) -- Alkane sulphonates -- Method
for determination of total alkaline
sulphonates content
Analysis of surface active agents (raw
materials) -- Alkane sulphonates -- Method
for determination of mean relative
molecular mass and content of alkane
monosulphonates
BS ISO 11564 Stationary source emissions
- Determination of the mass concentration
of nitrogen oxides Naphthylethylenediamine photometric
method
BS ISO 11632 Stationary source emissions
- Determination of mass concentration of
sulfur dioxide - Ion chromatography
method
Analysis of surface active agents (raw
materials) -- Alkane sulphonates -- Method
for determination of alkane
monosulphonates content
Analysis of surface active agents (raw
materials) -- Sodium
alkylbenzenesulphonates -- Method for
determination of mean relative molecular
mass
BS ISO 11468 Plastics - Preparation of
PVC pastes for test purposes - Dissolver
method
DD ENV 12936 Feather and down -
BS EN 131700
BS 6221 : Part 9
BS 6943
BS 7588
BS 9760
BS 6829 : Part 4 : Section 4.3
BS 9761
BS EN 1391
BS 9762
BS 9763
BS 9764
BS 9765
Determination of the permanent
deformation after dynamic fatigue stress
under constant load
NULL
Printed wiring boards -- Specification for
flexible multilayer boards with through
connections
Classification of shapes of electronic
components for placement on printed
wiring boards
Guide to hierarchical interconnection
technology
Specification for printed circuits of
assessed quality : generic data and methods
of test : capability approval procedure and
rules
Analysis of surface active agents (raw
materials) -- Ethylene oxide adducts -Method for determination of oxyethylene
groups
Sectional specification for capability
approval of manufacturers of multilayer
rigid printed wiring boards of assessed
quality with plated through holes
BS EN 1391 Adhesives for leather and
footwear materials - A method for
evaluating the bondability of materials Minimum requirements and material
classification
Sectional specification for capability
approval of manufacture of double-sided
rigid printed wiring boards of assessed
quality with plated through holes
Sectional specification for capability
approval of manufacturers of single- or
double-sided printed wiring boards of
assessed quality without plated through
holes
Sectional specification for capability
approval of manufacturers of single- or
double-sided flexible printed wiring boards
of assessed quality without through hole
connections and with or without rigidizing
component materials
Sectional specification for capability
approval of manufacturers of double-sided
BS 9766
BS 6829 : Part 4 : Section 4.1
BS 6829 : Part 4 : Section 4.2
BS EN 1391
BS 6829 : Part 4 : Section 4.4
BS 6829 : Part 4 : Section 4.5
BS 6829 : Part 4 : Section 4.6
BS 6829 : Part 5 : Section 5.1
BS EN 522
BS EN ISO 2870
BS EN ISO 2871-1
flexible printed wiring boards of assessed
quality with through hole connections and
with or without rigidizing component
materials
Specification for printed circuits of
assessed quality : sectional specification for
multilayer flexi-rigid printed circuits with
through hole connections
Analysis of surface active agents (raw
materials) -- Ethylene oxide adducts -Methods for determination of cloud
temperature (cloud point)
Analysis of surface active agents (raw
materials) -- Ethylene oxide adducts -Method for determination of polyethylene
glycols and non-ionic active matter
contents
BS EN 1391 Adhesives for leather and
footwear materials - A method for
evaluating the bondability of materials Minimum requirements and material
classification
Analysis of surface active agents (raw
materials) -- Ethylene oxide adducts -Method for determination of cloud point
index
Analysis of surface active agents (raw
materials) -- Ethylene oxide adducts -Method for determination of sulphated ash
Analysis of surface active agents (raw
materials) -- Ethylene oxide adducts -Method for determination of hydroxyl
value
Analysis of surface active agents (raw
materials) -- Ethoxylated alcohol and
alkylphenol sulphates -- Method for
determination of total active matter content
BS EN 522 Adhesives for leather and
footwear materials - Bond strength Minimum requirements and adhesive
classification
Surface active agents. Detergents.
Determination of anionic-active matter
hydrolyzable and non-hydrolyzable under
acid conditions
Surface active agents. Detergents.
BS 7775
BS 6829 : Part 5 : Section 5.2
BS EN ISO 2871-2
BS EN 522
BS EN 1281-1
BS 5728 : Part 7
BS ISO 6811
BS ISO 6811
BS ISO 7588-3
BS ISO 8388
BS ISO 8388
BS 5766-10
BS ISO 1012
BS EN 61334-4-61
BS EN 61334-4-61
Determination of cationic-active matter
content -- High molecular mass cationicactive matter
BS 7775 Specification for Penstocks
Analysis of surface active agents (raw
materials) -- Ethoxylated alcohol and
alkylphenol sulphates -- Method for
estimation of mean relative molecular mass
Surface active agents. Detergents.
Determination of cationic-active matter
content -- Cationic-active matter of low
molecular mass (between 200 and 500)
BS EN 522 Adhesives for leather and
footwear materials - Bond strength Minimum requirements and adhesive
classification
BS EN 1281-1 Anaesthetic and respiratory
equipment - Conical connectors - Part 1 :
Cones and sockets
BS 5728 : Part 7 Measurement of flow of
cold potable water in closed conduits - Part
7 : Specification for single mechanical type
meters
BS ISO 6811 Spherical plain bearings Vocabulary
BS ISO 6811 Spherical plain bearings Vocabulary
BS ISO 7588-3 Road vehicles Electrical/electronic switching devices Part 3 : Microrelays
BS ISO 8388 Knitted fabrics - Types Vocabulary
BS ISO 8388 Knitted fabrics - Types Vocabulary
BS 5766-10 Methods for analysis of animal
feeding stuffs - Preparation of test samples
BS ISO 1012 Photography - Films in sheets
and rolls for general use - Dimensions
BS EN 61334-4-61 Distribution
automation using distribution line carrier
systems - Part 4-61 : Data communication
protocols - Network layer - Connectionless
protocol
BS EN 61334-4-61 Distribution
automation using distribution line carrier
systems - Part 4-61 : Data communication
BS EN 1772
BS EN 60097
BS 4580
BS 5117:Part 0
BS 6580
BS 7012-11
BS 3900-A22
BS 3900-A21
BS 6782-10
BS 6782-13
BS 3900-A20
BS 3900-A19
BS 7012-6
BS EN ISO 11306
BS 6916-7
BS 5117 : Part 2 : Section 2.1
protocols - Network layer - Connectionless
protocol
Surface active agents. Determination of
wetting power by immersion
Specification for grid systems for printed
circuits
Specification for number designation of
organic refrigerants
Testing corrosion inhibiting, engine coolant
concentrate ('antifreeze') -- General
introduction
Specification for corrosion inhibiting,
engine coolant concentrate ('antifreeze')
BS 7012-11 Light microscopes - Part 11 :
Information provided to the user
BS 3900-A22 Methods of test for Paints Part A22 : Determination of density by the
pressure cup method
BS 3900-A21 Methods of test for Paints Part A21 : Determination of density by the
oscillation method
BS 6782-10 Binders for paints - Part 10 :
Determination of monomeric diisocyanates
in polyisocyanate resins
BS 6782-13 Binders for paints - Part 13 :
General methods of test for chlorinated
polymerization resins
BS 3900-A20 Methods of test for Paints Part A20 : Determination of density by the
immersed body (plummet) method
BS 3900-A19 Methods of test for Paints Part A19 : Determination of density by the
pyknometer method
BS 7012-6 Light microscopes - Part 6 :
Specification for spectral filters
BS EN ISO 11306 Corrosion of metals and
alloys - Guidelines for exposing and
evaluating metals and alloys in surface sea
water
BS 6916-7 Chainsaws - Part 7 : Method of
evaluating engine performance including
fuel consumption
Testing corrosion inhibiting, engine coolant
concentrate ('antifreeze') -- Methods of test
for corrosion inhibition performance -General procedures
BS ISO 8893
BS 7755-4.2.2
BS EN ISO 10993-2
BS EN 61086-1
BS EN 61086-2
BS 1282
BS 4072 : Part 1
BS EN 60601-2-16
BS EN ISO 4264
BS 5117:Part 1: Section 1.1
BS ISO 13756
BS 7861 : Part 1
BS EN 10083-2
BS ISO 8893 Forestry machinery Portable brush cutters and grass trimmers Engine performance and fuel consumption
BS 7755-4.2.2 Soil quality - Part 4 :
Biological methods - Section 4.2 : Effects
of pollutants on soil fauna - Subsection
4.2.2 : Determination of effects on
reproduction on earthworms (Eisenia
fetida)
BS EN ISO 10993-2 Biological evaluation
of medical devices - Part 2 : Animal
welfare requirements
Specification for loaded printed wire
boards (conformal coatings) -- Definitions,
classification and general requirements
Specification for loaded printed wire
boards (conformal coatings) -- Methods of
test
Guide to the choice, use and application of
wood preservatives
Wood preservation by means of
copper/chromium/arsenic compositions -Specification for preservatives
BS EN 60601-2-16 Medical electrical
equipment - Part 2 : Particular
requirements for the safety of
haemodialysis, haemodiafiltration and
haemofiltration equipment
BS EN ISO 4264 Methods of test for
Petroleum and its products - Part 380 :
Petroleum products - Calculation of cetane
index of middle-distillate fuels by the fourvariable equation
Testing corrosion inhibiting, engine coolant
concentrate ('antifreeze') -- Methods of test
for determination of physical and chemical
properties -- Ancillary procedures
BS ISO 13756 Determination of silver in
silver jewellery alloys - Volumetric
(potentiometric) method using sodium
chloride or potassium chloride
BS 7861 : Part 1 Strata reinforcement
support system components used in coal
mines - Part 1 : Specification for
rockbolting
BS EN 10083-2 Specification for
BS EN ISO 4288
BS 5117:Part 1: Section 1.2
BS 5117:Part 1: Section 1.3
BS 5117:Part 1: Section 1.4
BS EN 27740
BS 5117:Part 1: Section 1.5
BS 5117:Part 2: Section 2.2
BS 4072 : Part 2
BS 5219
BS 5434
BS 5435
Quenched and tempered steels - Part 2 :
Technical delivery conditions for unalloyed
quality steels
BS EN ISO 4288 Geometric Product
Specification (GPS) - Surface texture Profile method : Rules and procedures for
the assessment of surface texture
Testing corrosion inhibiting, engine coolant
concentrate ('antifreeze') -- Methods of test
for determination of physical and chemical
properties -- Determination of boiling point
Testing corrosion inhibiting, engine coolant
concentrate ('antifreeze') -- Methods of test
for determination of physical and chemical
properties -- Determination of freezing
point
Testing corrosion inhibiting, engine coolant
concentrate ('antifreeze') -- Methods of test
for determination of physical and chemical
properties -- Determination of foaming
characteristics
BS EN 27740 Instruments for surgery,
scalpels with detachable blades, fitting
dimensions
Testing corrosion inhibiting, engine coolant
concentrate ('antifreeze') -- Methods of test
for determination of physical and chemical
properties -- Coolant hard water stability
test
Testing corrosion inhibiting, engine coolant
concentrate ('antifreeze') -- Methods of test
for corrosion inhibition performance -Glassware tests
Wood preservation by means of
copper/chromium/arsenic compositions -Method for timber treatment
Wood preservatives. Determination of
eradicant action against Hylotrupes bajulus
(Linnaeus) larvae (laboratory method)
Wood preservatives. Determination of the
preventive action against recently hatched
larvae of Hylotrupes bajulus (Linnaeus)
(laboratory method)
Wood preservatives. Determination of the
toxic values against larvae of Hylotrupes
bajulus (Linnaeus) (laboratory method)
BS EN 20594-1
BS EN 60335-2-27
BS EN 12220
BS EN 60249-2-5
BS 5117:Part 2: Section 2.4
BS EN 60249-2-6
BS 1016-104.3
BS 1016-111
BS 5117:Part 2: Section 2.5
BS 5117:Part 2: Section 2.6
BS EN 60249-2-7
BS EN 20594-1 Conical fittings with a 6 %
(Luer) taper for syringes, needles and
certain other medical equipment - Part 1 :
General requirements
BS EN 60335-2-27 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.27 :
Skin exposure to ultraviolet and infrared
radiation
BS EN 12220 Ventilation for buildings Ductwork - Dimensions of circular flanges
for general ventilation
Base materials for printed circuits -Specifications -- Specification No 5.
Epoxide woven glass fabric copper-clad
laminated sheet of defined flammability
(vertical burning test)
Testing corrosion inhibiting, engine coolant
concentrate ('antifreeze') -- Methods of test
for corrosion inhibition performance -Static engine test
Base materials for printed circuits -Specifications -- Specification No.6.
Phenolic cellulose paper copper-clad
laminated sheet of defined flammability
(horizontal burning test)
BS 1016-104.3 Methods for analysis and
testing of coal and coke - Part 104 :
Proximate analysis - Section 104.3 :
Determination of volatile matter content
BS 1016-111 Methods for analysis and
testing of coal and coke - Part 111 :
Determination of abrasion index of coal
Testing corrosion inhibiting, engine coolant
concentrate ('antifreeze') -- Methods of test
for corrosion inhibition performance -Field test
Testing corrosion inhibiting, engine coolant
concentrate ('antifreeze') -- Methods of test
for corrosion inhibition performance -- Test
for corrosion of cast aluminium alloys
under heat-transfer conditions
Base materials for printed circuits -Specifications -- Specification No.7.
Phenolic cellulose paper copper-clad
laminated sheet of defined flammability
BS EN 61086-3-1
BS 1016-104.4
BS EN ISO 10707
BS 6493 : Part 2 : Section 2.4
BS 144 : Part 1
BS 144 : Part 2
BS EN ISO 4600
BS 5436
BS 5666 : Part 1
BS 5666 : Part 2
BS 5666 : Part 3
BS 5666 : Part 4
BS 5666 : Part 5
(vertical burning test)
Specification for loaded printed wire
boards (conformal coatings) -Specifications for individual materials -Coatings for general purpose (class I) and
for high reliability (class II)
BS 1016-104.4 Methods for analysis and
testing of coal and coke - Part 104 :
Proximate analysis - Section 104.4 :
Determination of ash content
BS EN ISO 10707 Water quality Evaluation in an aqueous medium of the
'ultimate' aerobic biodegradability of
organic compounds - Method by analysis
of biochemical oxygen demand (closed
bottle test)
Semiconductor devices -- Integrated
circuits -- Recommendations for interface
integrated circuits
Wood preservation using coal tar creosotes
-- Specification for preservative
Wood preservation using coal tar creosotes
-- Methods for timber treatment
BS EN ISO 4600 Plastics - Determination
of environmental stress cracking (ESC) Ball or pin impression method
Wood preservatives. Determination of
eradicant action against larvae of Anobium
punctatum (De Geer) (laboratory method)
Methods of analysis of wood preservatives
and treated timber -- Guide to sampling and
preparation of wood preservatives and
treated timber for analysis
Methods of analysis of wood preservatives
and treated timber -- Qualitative analysis
Methods of analysis of wood preservatives
and treated timber -- Quantitative analysis
of preservatives and treated timber
containing copper/chromium/arsenic
formulations
Quantitative analysis of preservatives and
treated timber containing copper
naphthenate
Methods of analysis of wood preservatives
and treated timber -- Determination of zinc
naphthenate in preservative solutions and
BS 5666 : Part 6
BS 5666 : Part 7
BS 5761 : Part 1
BS 6009
BS EN ISO 9692-2
BS EN ISO 307
BS EN 167000
BS EN 167000
BS 6239
BS 6240
BS 6559
BS 7066 : Part 2
BS 7282
treated timber
Methods of analysis of wood preservatives
and treated timber -- Quantitative analysis
of preservative solutions and treated timber
containing pentachlorophenol,
pentachlorophenyl laurate, çhexachlorocyclohexane and dieldrin
Methods of analysis of wood preservatives
and treated timber -- Quantitative analysis
of preservatives containing bis(tri-nbutyltin)oxide : determination of total tin
Wood preservatives. Accelerated ageing of
treated wood prior to biological testing -Evaporative ageing procedure
Wood preservatives. Determination of the
toxic values against wood destroying
Basidiomycetes cultured on an agar
medium
BS EN ISO 9692-2 Welding and allied
processes - Joint preparation - Part 2 :
Submerged arc welding of steels
BS EN ISO 307 Plastics - Polyamides Determination of viscosity number
BS EN 167000 Harmonized system of
quality assessment for electronic
components - Generic specification:
Piezoelectric filters
BS EN 167000 Harmonized system of
quality assessment for electronic
components - Generic specification:
Piezoelectric filters
Wood preservatives. Determination of
toxic values against Reticulitermes
santonenis de Feytaud (Laboratory method)
Wood preservatives. Determination of
preventive action against Reticulitermes
santonensis de Feytaud (laboratory
method)
Guide General introductory document on
European (or CEN) methods of test for
wood preservatives
Application by methods other than
brushing
Field test method for determining the
relative protective effectiveness of a wood
preservative in ground contact
BS 7066 : Part 1
BS EN 20-1
BS EN 20-2
BS EN 49-1
BS EN 49-2
BS EN 60399
BS EN 275
BS EN 330
BS EN 335-1
BS EN 335-2
BS EN 370
BS 2543
BS EN 1014-1
Wood preservatives. Laboratory method
for determining the protective effectiveness
of a preservative treatment against blue
stain in service -- Brushing procedure
Wood preservatives. Determination of the
protective effectiveness against Lyctus
brunneus (Stephens) -- Application by
surface treatment (laboratory method)
Wood preservatives. Determination of the
protective effectiveness against Lyctus
brunneus (Stephens) -- Application by
impregnation (laboratory method)
Wood preservatives. Determination of the
protective effectiveness against Anobium
punctatum (De Geer) by egg-laying and
larval survival -- Application by surface
treatment (laboratory method)
Wood preservatives. Determination of the
protective effectiveness against Anobium
punctatum (De Geer) by egg-laying and
larval survival -- Application by
impregnation (laboratory method)
BS EN 60399 Standard sheets for barrel
thread for E14 and E27 lampholders with
shade holder ring
Wood preservatives. Determination of the
protective effectiveness against marine
borers
Wood preservatives. Field test method for
determining the relative protective
effectiveness of a wood preservative for
use under a coating and exposed out-ofground contact. L-joint method
Hazard classes of wood and wood-based
products against biological attack -Classification of hazard classes
Hazard classes of wood and wood-based
products against biological attack -- Guide
to the application of hazard classes to solid
wood
Wood preservatives. Determination of
eradicant efficacy in preventing emergence
of Anobium punctatum (De Geer)
BS 2543 Specification for Woven and
knitted fabrics for upholstery
Wood preservatives. Creosote and
DD ENV 1250-2
DD ENV 1390
BS 2543
BS 6312
BS 5136
BS 5772 : Part 2
BS 2540
BS EN 60512-1
BS IEC 60609-2
BS 4727 : Part 1 : Group 13
BS 5772 : Part 4
BS 5233
BS 5772 : Part 3
BS 5772 : Part 5
creosoted timber. Methods of sampling and
analysis -- Procedure for sampling creosote
Wood preservatives. Methods of measuring
losses of active ingredients and other
preservative ingredients from treated
timber -- Laboratory method for obtaining
samples for analysis to measure losses by
leaching into water or synthetic sea water
Wood preservatives. Determination of the
eradicant action against Hylotrupes bajulus
(Linnaeus) larvae. Laboratory method
BS 2543 Specification for Woven and
knitted fabrics for upholstery
Specification for plugs for use with British
Telecommunications line jack units
Specification for toothpastes
General examination, electrical continuity
and contact resistance tests, insulation tests
and voltage stress tests
Specification for granular desiccant silica
gel
Electromechanical components for
electronic equipment. Basic testing
procedures and measuring methods. -General
BS IEC 60609-2 Cavitation pitting
evaluation in hydraulic turbines, storage
pumps and pump turbines - Part 2 :
Evaluation in Pelton turbines
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Electromechanical components for
electronic equipment
Specification for electromechanical
components for electronic equipment :
basic testing procedures and measuring
methods -- Dynamic stress tests
BS 5233 Glossary of Terms used in
metrology (incorporating BS 2643)
Specification for electromechanical
components for electronic equipment :
basic testing procedures and measuring
methods -- Current-carrying capacity tests
Specification for electromechanical
BS 5772 : Part 6
BS 5772 : Part 7
BS 5772 : Part 8
BS 5772 : Part 9
BS 3482 : Part 1
BS 3482 : Part 11
BS 3482 : Part 2
BS 5817 : Part 18
BS 3482 : Part 3
BS 3482 : Part 4
BS 3482 : Part 5
BS 3482 : Part 6
components for electronic equipment :
basic testing procedures and measuring
methods -- Impact tests (free components),
static load tests (fixed components),
endurance tests and overload tests
Specification for electromechanical
components for electronic equipment :
basic testing procedures and measuring
methods -- Climatic tests and soldering
tests
Specification for electromechanical
components for electronic equipment :
basic testing procedures and measuring
methods -- Mechanical operating tests and
sealing tests
Specification for electromechanical
components for electronic equipment :
basic testing procedures and measuring
methods -- Connector tests (mechanical)
and mechanical tests on contacts and
terminations
Specification for electromechanical
components for electronic equipment :
basic testing procedures and measuring
methods -- Miscellaneous tests
Methods of test for desiccants Sampling,
and preparation and storage of test samples
Methods of test for desiccants
Determination of friability and dust content
Methods of test for desiccants
Determination of moisture content
Specification for audiovisual, video and
television equipment and systems -Specification for connectors for automatic
slide projectors with built-in triacs for
audiovisual application
Methods of test for desiccants
Determination of pH
Methods of test for desiccants
Determination of water-soluble chlorides
content
Methods of test for desiccants
Determination of water-soluble sulphates
content
Methods of test for desiccants
Determination of adsorptive capacity
BS 7588
BS 3482 : Part 7
BS 3482 : Part 8
BS 3482 : Part 9
BS 542
BS 3523
BS 3618 : Section 1
BS 3618 : Section 10
BS 9520
BS 3618 : Section 11
BS 3618 : Section 2
BS 3618 : Section 3
BS 3618 : Section 4
BS 3618 : Section 5
BS 9521
BS 3618 : Section 6
BS 9522 N0001
BS 7444
BS 5233
BS 7882
BS EN 61675-2
Guide to hierarchical interconnection
technology
Methods of test for desiccants
Determination of particle size
Methods of test for desiccants Estimation
of ammonia and ammonium compounds
content
Methods of test for desiccants
Determination of cobalt chloride content
Specification for cable glands aud sealing
boxes for association with apparatus for
use at mines and quarries
Specification for granular desiccant silica
gel impregnated with cobalt chloride
Glossary of mining terms Planning and
surveying
Glossary of mining terms Transport
Specification for electrical connectors of
assessed quality for d.c. and low frequency
application: generic data, methods of test
and capability approval procedures
Glossary of mining terms Strata control
Glossary of mining terms Ventilation
Glossary of mining terms Boring and
exploration
Glossary of mining terms Drainage
Glossary of mining terms Geology
Specification for removable contacts of
assessed quality for electrical connectors as
defined by BS 9520: genpric data, methods
of test and rules for the preparation of
detail specifications
Glossary of mining terms Drilling and
blasting
Detail specification for multi-contact
circular electrical connectors for d.c. and
low frequency applications. Bayonet
coupling with front release, rear removable
crimp contacts. Full assessment level
Specification for molecular sieves (of type
4A)
BS 5233 Glossary of Terms used in
metrology (incorporating BS 2643)
BS 7882 Method for Calibration and
classification of torque measuring devices
BS EN 61675-2 Radionuclide imaging
BS 9523
BS 9524
BS 3618 : Section 7
BS 3618 : Section 8
BS 3618 : Section 9
BS 5754
BS 5915
BS 9525
BS EN 61675-1
BS 9526 N0001
BS 9526 N0003
devices - Characteristics and test conditions
- Part 2 : Single photon emission computer
tomographs
Rules for the preparation of detail
specifications for rectangular electrical
connectors of assessed quality with integral
metaf housings for d.c. and low frequency
applications. Full and basic assessment
levels
Rules for the preparation of detail
specifications for rectangular electrical
connectors of assessed quality with
moulded bodies for d.c. and low frequency
applications. Full and basic assessment
levels
Glossary of mining terms Electrical
engineering and lighting
Glossary of mining terms Winning and
working
Glossary of mining terms Shafts and
associated equipment
Specification for electrical analogue and
state signals for use in coal mines
Specification for equipment for minehead
assay and sorting radioactive ores in
containers
Rules for the preparation of detail
specifications for two-part printed board
electrical connectors and board-mounted
transition devices of assessed quality for
d.c. and Lf. applications: full and basic
assessment levels
BS EN 61675-1 Radionuclide imaging
devices - Characteristics and test conditions
- Part 1 : Positron emission tomographs
Detail specification for multi-contact edge
socket electrical connectors. Single or
double sided, closed ended, replaceable
contacts, through-board solder or wire wrap
terminations. Full assessment level
Detail specification for multi-contact edge
socket electrical connectors. Single or
double sided, open ended, guide key
location, replaceable contacts, throughboard solder or wire wrap terminations.
Full assessment level
BS Z 8
BS Z 6
BS CECC 75100
BS CECC 75101
BS CECC 75201
BS CECC 75301
BS QC 030000
BS EN 175100
BS Z 7
BS 1016 : Part 112
BS 6127 : Part 3
BS Z 8 Space data and information transfer
systems - Packet telemetry
BS Z 6 Space data and information transfer
systems - Parameter value language
specification
Harmonized system of quality assessment
for electronic components. Sectional
specification : two-part and edge socket
connectors for printed board application
Specification for harmonized system of
quality assessment for electronic
components. Example detail
specification/Blank detail specification.
Two-part and edge socket connectors for
printed board application
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification.
Interim example. Detail specification/blank
detail specification. Circular connectors for
frequencies below 3 MHz
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification.
Interim Example. Detail specification/blank
detail specification : rectangular connectors
for frequencies below 3 MHz
Harmonized system of quality assessment
for electronic components. Rectangular
connectors for frequencies below 3 MHz.
Generic specification. General
requirements and guide for the preparation
of detail specifications for connectors with
assessed quality
Harmonized system of quality assessment
for electronic components. Sectional
specification. Two part and edge socket
connectors for printed board applications
BS Z 7 Space data and information transfer
systems - ASCII encoded English
Methods for analysis and testing of coal
and coke -- Determination of Hardgrove
grindability index of hard coal
Method of determining maceral group
composition of bituminous coal and
anthracite
BS 6127 : Part 4
BS 6127 : Part 5
BS ISO 1100-2
BS ISO 11377
BS EN 175300
BS 6127 : Part 1
BS EN 28877
BS ISO 11379
BS 5624
BS EN 60268-12
BS 7067
BS 7530 : Part 1
BS 7530 : Part 2
BS EN 60603-7
Method of determining microlithotype,
carbominerite and minerite composition
Method of determining microscopically the
reflectance of vitrinite
BS ISO 1100-2 Measurement of liquid
flow in open channels - Part 2 :
Determination of the stage-discharge
relation
BS ISO 11377 Textile floor coverings Floor soiling - Test site set-up and soiling
evaluation
Harmonized system of quality assessment
for electronic components. Sectional
specification : rectangular connectors for
frequencies below 3 MHz
Petrographic analysis of bituminous coal
and anthracite -- Glossary of terms relating
to the petrographic analysis of bituminuous
coal and anthracite
Information technology.
Telecommunications and information
exchange between systems. Interface
connector and contact assignments for
ISDN Basic Access Interface located at
reference points S and T
BS ISO 11379 Textile floor coverings Laboratory cleaning procedure using spray
extraction
Code of practice for the lining of vessels
and equipment for chemical processes :
copper and copper alloys
Sound system equipment -- Application of
connectors for broadcast and similar use
Guide to determination and presentation of
float and sink characteristics of raw coal
and of products from coal preparation
plants
Methods for froth flotation testing of hard
coal -- Laboratory procedure
Methods for froth flotation testing of hard
coal -- Evaluation of flotation
characteristics
Connectors for frequencies below 3 MHz
for use with printed boards -- Detail
specification for connectors, 8-way,
including fixed and free connectors with
BS 5660 : Part 1
BS 5660 : Part 2
BS EN 764
BS 5661
BS 5662 : Part 1
BS 5662 : Part 2
BS 5663 : Part 1
BS 2871 : Part 3
BS 5663 : Part 2
BS 6147
BS 9566
BS CECC 96000
BS EN ISO 11987
BS CECC 96100
BS CECC 96200
BS 6200 : Part 3 : Section 3.19 :
Subsection 3.19.
common mating features
Methods of sampling iron ores -- Manual
method of increment sampling
Methods of sampling iron ores -Mechanical method of increment sampling
and sample preparation
Pressure equipment. Terminology and
symbols. Pressure, temperature, volume
Method for preparation of samples of iron
ores by manual means
Evaluation of sampling methods for iron
ores -- Experimental methods for
evaluation of quality variation
Evaluation of sampling methods for iron
ores -- Experimental methods for checking
the precision of sampling
Methods of testing iron ores -Determination of moisture content
Specification for copper and copper alloys.
Tubes -- Tubes for heat exchangers
Methods of testing iron ores -Determination of size distribution by
sieving
Methods for determination of bulk density
of iron ores
Rules for the preparation of detail
specifications for printed board
programming switches
Harmonized system of quality assessment
for electronic components. Generic
specification : electromechanical switches
BS EN ISO 11987 Ophthalmic optics Contact lenses - Determination of shelf-life
Harmonized system of quality assessment
for electronic components. Sectional
specification including blank detail
specification : Rotary switches
Harmonized system of quality assessment
for electronic components. Sectional
specification including blank detail
specification : Lever switches
Sampling and analysis of iron, steel and
other ferrous metals -- Methods of analysis
-- Determination of molybdenum -Molybdenum oxide and high grade
molybdenite ores : gravimetric method
BS CECC 96300
BS CECC 96400
BS 6599
BS 7020 : Part 1
BS 7020 : Part 10 : Section 10.2
BS 7020 : Part 11 : Section 11.1
BS 7020 : Part 11 : Section 11.2
BS ISO/IEC 15507
BS 7020 : Part 12
BS QC 960100
BS 7020 : Part 13
BS 7020 : Part 14
BS 7020 : Part 15
Harmonized system of quality assessment
for electronic components. Sectional
specification including blank detail
specification : Sensitive switches
Harmonized system of quality assessment
for electronic components. Sectional
specification including blank detail
specification : Push-button switches
Method for determination of crushing
strength of iron ore pellets
Analysis of iron ores -- Method for the
preparation of pre-dried test samples for
chemical analysis
Analysis of iron ores -- Methods for the
determination of copper content -- Flame
atomic absorption spectrometric method
Analysis of iron ores -- Methods for the
determination of vanadium content -BPHA spectrophotometric method
Analysis of iron ores -- Methods for the
determination of vanadium content -Flame atomic absorption spectrometric
method
BS ISO/IEC 15507 Information technology
- Telecommunications and information
exchange between systems - Private
Integrated Services Network - Interexchange signalling protocol - PINX clock
synchronization
Analysis of iron ores -- Method for the
determination of titaninum content :
spectrophotometric method
Harmonized system of quality assessment
for electronic components.
Electromechanical switches for use in
electronic equipment. Sectional
specification for rotary switches
Analysis of iron ores -- Method for the
determination of arsenic content :
spectrophotometric method
Analysis of iron ores -- Method for the
determination of sodium and/or potassium
contents : flame atomic absorption
spectrometric method
Analysis of iron ores -- Methods for the
determination of calcium content : flame
BS 7020 : Part 17
BS 7020 : Part 18
BS 7020 : Part 16
BS QC 960200
BS QC 960201
BS 7020 : Part 19
BS 7020 : Part 20
BS QC 960300
BS 7020 : Part 22
BS QC 960301
atomic absorption spectrometric method
Analysis of iron ores -- Method for the
determination of lead and/or zinc contents :
flame atomic absorption spectrometric
method
Analysis of iron ores -- Methods for the
determination of magnesium content :
flame atomic absorption spectrometric
method
Analysis of iron ores -- Methods for the
determination of calcium content : flame
atomic absorption spectrometric method -Methods for the determination of nickel
and/or chromium contents : flame atomic
absorption spectrometric method
Harmonized system of quality assessment
for electronic components.
Electromechanical switches for use in
electronic equipment. Sectional
specification for lever (toggle) switches
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification :
electromechanical switches for use in
electronic equipment. Blank detail
specification for lever (toggle) switches
Analysis of iron ores -- Method for the
determination of fluorine content : ionselective electrode method
Analysis of iron ores -- Method for the
determination of water soluble chloride
content : ion-selective electrode method
Harmonized system of quality assessment
for electronic components.
Electromechanical switches for use in
electronic equipment. Sectional
specification for sensitive switches
Analysis of iron ores -- Method for the
determination of acid-soluble iron (II)
content : titrimetric method
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification :
electromechanical switches for use in
electronic equipment. Blank detail
specification for sensitive switches
BS 7020 : Part 3
BS 7020 : Part 4 : Section 4.2
BS QC 960400
BS 7020 : Part 4 : Section 4.3
BS 7020 : Part 5 : Section 5.1
BS QC 960401
BS 7020 : Part 6 : Section 6.1
BS 7020 : Part 6 : Section 6.2
BS 7020 : Part 7 : Section 7.1
BS 7020 : Part 7 : Section 7.2
BS 7020 : Part 8 : Section 8.1
BS QC 960500
BS EN 50088
BS 7020 : Part 8 : Section 8.2
Analysis of iron ores -- Method for the
determination of combined water content
Analysis of iron ores -- Method for the
determination of total iron content -Titanium (III) chloride reduction methods
Harmonized system of quality assessment
for electronic components.
Electromechanical switches for use in
electronic equipment. Sectional
specification for pushbutton switches
Analysis of iron ores -- Method for the
determination of total iron content -- Silver
reduction titrimetric method
Analysis of iron ores -- Methods for the
determination of silicon content -Gravimetric methods
Specification for harmonized system of
quality assessment for electronic
components. Blank detail specification :
electromechanical switches for use in
electronic equipment. Blank detail
specification for pushbutton switches
Analysis of iron ores -- Methods for the
determination of phosphorus content -Titrimetric method
Analysis of iron ores -- Methods for the
determination of phosphorus content -Molybdenum blue spectrophotometric
method
Analysis of iron ores -- Methods for the
determination of sulphur content -Gravimetric method
Analysis of iron ores -- Methods for the
determination of sulphur content -Combustion method
Analysis of iron ores -- Methods for the
determination of aluminium content -Titrimetric method
Harmonized system of quality assessment
for electronic components.
Electromechanical switches for use in
electronic equipment. Sectional
specification for in-line package switches
BS EN 50088 Safety of electric toys
Flame atomic absorption spectrometric
method
BS EN 60335-2-31
BS 7020 : Part 9 : Section 9.1
BS EN 196000
BS 7020 : Part 9 : Section 9.2
BS EN 196500
BS ISO 2596
BS 9750
BS 9751
BS ISO 2597-1
BS 9753
BS ISO 4698
BS ISO/IEC 10168-1
BS ISO/IEC 8613-9
BS EN 60335-2-31 Safety of household
and similar electrical appliances - Part 2 :
Particular requirements - Section 2.31 :
Range hoods
Analysis of iron ores -- Methods for the
determination of manganese content -Spectrophotometric method
Harmonized system of quality assessment
for electronic components. Generic
specification. Electromechanical switches
Analysis of iron ores -- Methods for the
determination of manganese content -Flame atomic absorption spectrometric
method
Harmonized system of quality assessment
for electronic components. Sectional
specification. Membrane switches
including blank detail specification EN
196501
Iron ores. Determination of hygroscopic
moisture in analytical samples. Gravimetric
and Karl Fischer methods
Specification for fixed radio frequency
inductors of assessed quality : generic data
and methods of test
Blank detail specification for fixed
insulated (unshielded) r.f.inductors at the
full assessment level
Iron ores. Determination of total iron
content -- Titrimetric method after tin (II)
chloride reduction
Sectional specification for variable r.f. type
inductors of assessed quality for use in
electronic equipment for capability
approval
Iron ore pellets. Determination of relative
free-swelling index
BS ISO/IEC 10168-1 Information
technology - Open Systems
Interconnection - Conformance test suite
for the Session protocol - Part 1 : Test suite
structure and test purposes
BS ISO/IEC 8613-9 Information
technology - Open Document Architecture
(ODA) and interchange format - Part 9 :
Audio content architectures - (ITU-T Rec.
BS ISO 5418-1
BS ISO 7992
BS ISO 8371
BS ISO 10836
BS 5050
BS 5954
BS 7728
BS ISO/IEC ISP 15121-2
BS ISO/IEC ISP 15121-3
BS EN 1081
BS ISO 13752
BS ISO 5782-1
BS ISO 5782-2
BS EN 1797-1
BS EN 160201
T.419 (1995) ISO/IEC 8613-9 : 1996)
Iron ores. Determination of copper content.
-- 2, 2'-Biquinolyl spectrophotometric
method
Iron ores. Determination of reduction
properties under load
Iron ores. Determination of decrepitation
index
Iron ores. Method of sampling and sample
preparation for physical testing
Methods of test for cryolite
Specification for dimensions of panels and
racks for electronic equipment
Mechanical structures for electronic
equipment. Terminology
BS ISO/IEC ISP 15121-2 Information
technology - International Standardized
Profile AOD1n - Interactive Manipulation
of ODA Documents - Part 2 : AOD12 DTAM/Insert
BS ISO/IEC ISP 15121-3 Information
technology - International Standardized
Profile AOD1n - Interactive Manipulation
of ODA Documents - Part 3 : AOD13 DTAM/Manipulation
BS EN 1081 Resilient floor coverings Determination of the electrical resistance
BS ISO 13752 Air quality - Assessment of
uncertainty of a measurement method
under field conditions using a second
method as reference
BS ISO 5782-1 Pneumatic fluid power Compressed air filters - Part 1 : Main
characteristics to be included in supplier's
literature and product-marking
requirements
BS ISO 5782-2 Pneumatic fluid power Compressed air filters - Part 2 : Test
methods to determine the main
characteristics to be included in supplier's
literature
BS EN 1797-1 Cryogenic vessels Gas/material compatibility - Part 1 :
Oxygen compatibility
BS EN 160201 Harmonized system of
quality assessment for electronic
DD ENV 342
BS 5050:Part 8
BS EN 60297-4
DD ENV 343
BS EN ISO 6252
BS EN 60917
BS 6870 : Part 2 : Section 2.1
BS 6870 : Part 2 : Section 2.3
BS 6870 : Part 2 : Section 2.5
BS 6870 : Part 2 : Section 2.2
BS 6870 : Part 2 : Section 2.4
BS 6870 : Part 2 : Section 2.6
BS EN 60917-2
components - Blank detail specification Microwave modular electronic units of
assessed quality - Capability approval
DD ENV 342 Protective clothing Ensembles for protection against cold
Methods of test for cryolite -Determination of calcium content
Mechanical structures for electronic
equipment. Dimensions of mechanical
structures of the 482.6 mm (19 in) series -Subracks and associated plug-in units.
Additional dimensions
DD ENV 343 Protective clothing Protection against foul weather
BS EN ISO 6252 Plastics - Determination
of environmental stress cracking (ESC) Constant-tensile-stress method
Modular order for the development of
mechanical structures for electronic
equipment practices
Analysis of aluminium ores -- Chemical
methods -- Method of preparation of predried test samples
Analysis of aluminium ores -- Chemical
methods -- Method for determination of
loss of mass at 1075øC : gravimetric
method
Analysis of aluminium ores -- Chemical
methods -- Method for determination of
iron content : titrimetric method
Analysis of aluminium ores -- Chemical
methods -- Method for determination of
hygroscopic moisture in analytical samples
: gravimetric method
Analysis of aluminium ores -- Chemical
methods -- Method for determination of
silicon content : combined gravimetric and
spectrophotometric method
Analysis of aluminium ores -- Chemical
methods -- Method for determination of
aluminium content : EDTA titrimetric
method
Modular order for the development of
mechanical structures for electronic
equipment practices -- Sectional
specification. Interface co-ordination
BS 6870 : Part 2 : Section 2.7
DD ENV 50196
BS 6911-14
BS 6870 : Part 2 : Section 2.8
BS 6870 : Part 3
BS 3564
BS 5804
BS CECC 20000
BS 5805
BS EN 60444-4
BS 3156 : Part 11 : Section 11.1 :
Subsection 11.1
BS 5806
BS QC 720100
dimensions for the 25 mm equipment
practice
Analysis of aluminium ores -- Chemical
methods -- Method for determination of
titanium content : spectrophotometric
method
DD ENV 50196 Live working - Required
insulation level and related air distances Calculation method
BS 6911-14 Testing earth-moving
machinery - Part 14 : Crawler machines Performance requirements and test
procedures for braking systems
Analysis of aluminium ores -- Chemical
methods -- Method for determination of
phosphorus content : spectrophotometric
method
Analysis of aluminium ores -- Method for
multi-element analysis by wavelength
dispersive X-ray fluorescence
Method for size-grading of muscovite mica
blocks, thins and films
Method of visual classification for
muscovite mica blocks, thins and films
Harmonized system of quality assessment
for electronic components : generic
specification : semiconductor
optoelectronic and liquid crystal devices
Method of thermal classification for
phlogopite mica splittings
BS EN 60444-4 Measurement of quartz
crystal unit parameters by zero phase
technique in a &pi;-network - Part 4 :
Method for the measurement of the load
resonance frequency f&infL;, load
resonance resistance R&infL; and the
calculation of other derived val
Methods for non-manufactured gases -Hydrocarbons and inert gases -Determination of hydrocarbons to C8 and
inert gases by gas chromatography
Method of measurement of thickness for
mica blocks, thins, films and splittings
Harmonized system of quality assessment
for electronic components. Semiconductor
devices. Sectional specification for
BS 5952
BS EN ISO 7932
BS 7444
BS 7529
BS 3156 : Part 11 : Section 11.1 :
Subsection 11.1
BS 3156 : Part 11 : Section 11.2 :
Subsection 11.2
BS 3156 : Part 11 : Section 11.2 :
Subsection 11.2
BS ISO/IEC TR 15504-4
BS ISO/IEC TR 15504-6
BS ISO/IEC TR 15504-7
BS 3156 : Part 11 : Section 11.2 :
Subsection 11.2
BS 3156 : Part 11 : Section 11.3 :
Subsection 11.3
BS 3156 : Part 11 : Section 11.3 :
Subsection 11.3
BS ISO/IEC TR 15504-8
BS ISO/IEC TR 15504-9
optoelectronic devices
Specification for muscovite mica
components for electronic equipment
BS EN ISO 7932 Microbiology - General
guidance for the enumeration of Bacillus
cereus Colony-count technique at 30 °C
Specification for molecular sieves (of type
4A)
Specification for desiccant activated clay
Methods for non-manufactured gases -Hydrocarbons and inert gases -Determination of hydrocarbons from
butane (C4) to hexadecane (C16) by gas
chromatography
Methods for non-manufactured gases -Determination of potential hydrocarbon
liquid content -- General introduction
Methods for non-manufactured gases -Determination of potential hydrocarbon
liquid content -- Weighing method
BS ISO/IEC TR 15504-4 Information
technology - Software process assessment Part 4 : Guide to performing assessments
BS ISO/IEC TR 15504-6 Information
technology - Software process assessment Part 6 : Guide to competency of assessors
BS ISO/IEC TR 15504-7 Information
technology - Software process assessment Part 7 : Guide for use in process
improvement
Methods for non-manufactured gases -Determination of potential hydrocarbon
liquid content -- Volumetric method
Methods for non-manufactured gases -Determination of water in natural gas by
the Karl Fischer method -- Introduction
Methods for non-manufactured gases -Determination of water in natural gas by
the Karl Fischer method -- Titration
method
BS ISO/IEC TR 15504-8 Information
technology - Software process assessment Part 8 : Guide for use in determining
supplier capability
BS ISO/IEC TR 15504-9 Information
technology - Software process assessment -
BS 3156 : Part 11 : Section 11.4 :
Subsection 11.4
BS 3156 : Part 11 : Section 11.4 :
Subsection 11.4
BS 3156 : Part 11 : Section 11.4 :
Subsection 11.4
BS EN 31252
BS EN 31253
BS 7678
BS 6907 : Part 1
BS ISO/IEC TR 15504-2
BS ISO/IEC TR 15504-3
BS 3156 : Part 11 : Section 11.4 :
Subsection 11.4
BS 3156 : Part 11 : Section 11.4 :
Subsection 11.4
BS 6907 : Part 2
BS EN 61727
BS 6907 : Part 3
Part 9 : Vocabulary
Methods for non-manufactured gases -Determination of sulfur compounds in
natural gas -- Introduction
Methods for non-manufactured gases -Determination of sulfur compounds in
natural gas -- Odoriferous sulfur
compounds by gas chromatography using
an electrochemical detector
Methods for non-manufactured gases -Determination of sulfur compounds in
natural gas -- Hydrogen sulphide,
mercaptan sulfur, and carbonyl sulfide
sulfur by potentiometry
Lasers and laser related equipment. Laser
device. Minimum requirements for
documentation
Lasers and laser-related equipment. Laser
device. Mechanical interfaces
Method for determination of mercury in
natural gas
Electrical installations for open-cast mines
and quarries -- Glossary
BS ISO/IEC TR 15504-2 Information
technology - Software process assessment Part 2 : A reference model for processes
and process capability
BS ISO/IEC TR 15504-3 Information
technology - Software process assessment Part 3 : Performing an assessment
Methods for non-manufactured gases -Determination of sulfur compounds in
natural gas -- Hydrogen sulfide, carbonyl
sulfide, and sulfur-containing odorants by
gas chromatography using a flame
photometric detector
Methods for non-manufactured gases -Determination of sulfur compounds in
natural gas -- Lingener combustion method
Electrical installations for open-cast mines
and quarries -- General recommendations
for protection against direct contact and
electric shock
Photovoltaic (PV) systems. Characteristics
of the utility interface
Electrical installations for open-cast mines
BS 6907 : Part 5
BS 3939 : Part 1
BS EN ISO 11114-1
BS 3939 : Part 11
BS 4019 : Part 3
BS 3939 : Part 12
BS 4019 : Part 4
BS EN ISO 11114-1
BS EN ISO 11114-3
BS 2000 : Part 0
BS ISO 6805
BS 2000 : Part 107
BS 2000 : Part 112
and quarries -- Recommendations for
equipment and ancillaries
Electrical installations for open-cast mines
and quarries -- Recommendations for
operation
Graphical symbols for electrical power,
telecommunications and electronics
diagrams -- General information, general
index
BS EN ISO 11114-1 Transportable gas
cylinders - Compatibility of cylinder and
valve materials with gas contents - Part 1 :
Metallic materials
Graphical symbols for electrical power,
telecommunications and electronics
diagrams -- Architectural and topographical
installation plans and diagrams
Rotary core drilling equipment -Specification for System A. Metric units
Graphical symbols for electrical power,
telecommunications and electronics
diagrams -- Guide for binary logic elements
Rotary core drilling equipment -Specification for System A. Inch units
BS EN ISO 11114-1 Transportable gas
cylinders - Compatibility of cylinder and
valve materials with gas contents - Part 1 :
Metallic materials
BS EN ISO 11114-3 Transportable gas
cylinders - Compatibility of cylinder and
valve materials with gas contents - Part 3 :
Autogenous ignition test in oxygen
atmosphere
Methods of test for petroleum and its
products -- General introduction
Rubber hoses and hose assemblies for
underground mining, Wire-reinforced
hydraulic types for coal mining.
Specification
Methods of test for petroleum and its
products -- Determination of sulfur, Lamp
combustion method
Methods of test for petroleum and its
products -- Determination of corrosiveness
to copper of lubricating grease, Copper
strip method
BS EN 61334-4-61
BS EN 61334-4-33
BS EN 61334-4-33
BS EN 61334-4-33
BS EN 60204-32
BS EN 60917-1
BS EN ISO 11114-3
BS EN ISO 13341
BS EN ISO 13341
BS EN ISO 868
BS EN ISO 12687
BS EN ISO 2503
BS EN 61334-4-61 Distribution
automation using distribution line carrier
systems - Part 4-61 : Data communication
protocols - Network layer - Connectionless
protocol
BS EN 61334-4-33 Distribution
automation using distribution line carrier
systems - Part 4-33 : Data communication
protocols - Data link layer - Connection
oriented protocol
BS EN 61334-4-33 Distribution
automation using distribution line carrier
systems - Part 4-33 : Data communication
protocols - Data link layer - Connection
oriented protocol
BS EN 61334-4-33 Distribution
automation using distribution line carrier
systems - Part 4-33 : Data communication
protocols - Data link layer - Connection
oriented protocol
BS EN 60204-32 Safety of machinery Electrical equipment of machines - Part 32
: Requirements for hoisting machines
BS EN 60917-1 Modular order for the
development of mechanical structures for
electronic equipment practices - Part 1 :
Generic standard
BS EN ISO 11114-3 Transportable gas
cylinders - Compatibility of cylinder and
valve materials with gas contents - Part 3 :
Autogenous ignition test in oxygen
atmosphere
BS EN ISO 13341 Transportable gas
cylinders - Fitting of valves to gas
cylinders
BS EN ISO 13341 Transportable gas
cylinders - Fitting of valves to gas
cylinders
BS EN ISO 868 Plastics and ebonite Determination of indentation hardness by
means of a durometer (Shore hardness)
BS EN ISO 12687 Metallic coatings Porosity tests - Humid sulfur (flowers of
sulfur) test
BS EN ISO 2503 Gas welding equipment Pressure regulators for gas cylinders used
BS ISO/IEC ISP 11187-4
BS 2000 : Part 121
BS 2000 : Part 129
BS 2000 : Part 133
BS ISO/IEC ISP 11186-2
BS ISO/IEC ISP 11189
BS EN 3676
BS 4727 : Part 3 : Group 02
BS 4727 : Part 3 : Group 03
BS 2000 : Part 135
BS 2000 : Part 136
in welding, cutting and allied processes up
to 300 bar
BS ISO/IEC ISP 11187-4 Information
Technology - International Standardized
Profile AVT1n, AVT2n - Virtual terminal
basic class - Application profiles - Part 4 :
AVT23. S-mode Paged Application Profile
Methods of test for petroleum and its
products -- Determination of oil separation
from lubricating grease, Pressure filtration
method
Methods of test for petroleum and its
products -- Determination of bromine
number, Colour indicator titration method
Methods of test for petroleum and its
products -- Determination of drop melting
point of wax and petrolatum
BS ISO/IEC ISP 11186-2 Information
technology - International Standardized
Profiles FVT3nn - Virtual Terminal Basic
Class - Register of attribute assignment
type definitions - Part 2 : FVT311 Repertoire Assignment Type for ISO/IEC
10646
BS ISO/IEC ISP 11189 Information
technology - International Standardized
Profile FDI2 - Directory Data Definitions MHS Use of the Directory
BS EN 3676 Inserts, thin wall, self-locking
- Design standard
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Telephony
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Telegraphy, facsimile and data
communication
Methods of test for petroleum and its
products -- Determination of rustpreventing characteristics of steam-turbine
oil in the presence of water
Methods of test for petroleum and its
BS 2000 : Part 137
BS 4727 : Part 3 : Group 05
BS 4727 : Part 3 : Group 06
BS 4727 : Part 3 : Group 07
BS 2772 : Part 2
BS 4727 : Part 3 : Group 08
BS 2772 : Part 3
BS 4727 : Part 3 : Group 09
BS 3237
BS 3289
BS 5938 : Part 1
BS 4727 : Part 3 : Group 10
products -- Determination of saponification
number. Titration method
Methods of test for petroleum and its
products -- Determination of oil content of
water mix metalworking oil dilutions
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Propagation and media terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Radio location and navigation terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Radiocommunication terminology
Colliery haulage and winding equipment
Specification for wrought steel
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Acoustics and electroacoustics
Colliery haulage and winding equipment
Specification for 1.5% manganese steel
castings
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Transmission lines and waveguides
Specification for light and medium rolling
stock for mineral haulage in mines
Specification for textile carcase conveyor
belting for use in underground mines
(including fire performance)
Cores for inductors and transformers for
telecommunications -- Methods of
measurement
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
BS 4727 : Part 3 : Group 11
BS 4727 : Part 3 : Group 12
BS 4727 : Part 3 : Group 13
BS 4727 : Part 3 : Group 14
BS 4727 : Part 3 : Group 15
BS 4727 : Part 3 : Group 16
BS 4727 : Part 3 : Group 17
BS 3876 : Part 1
BS 3876 : Part 2
telecommunications and electronics -Recording and reproduction of sound all
video terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Space radiocommunications terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Telecommunications, channels and
networks
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Optical fibre communication
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Oscillations, signals and related devices
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Antennas
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Switching and signalling in
telecommunications
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Transmission
Rope rollers, pulleys, mountings and
assemblies for colliery track haulage -Specification for parallel barrel rollers,
mountings and assemblies
Rope rollers, pulleys, mountings and
assemblies for colliery track haulage --
BS 3876 : Part 5
BS 5938 : Part 2
BS 6701
BS 4073
BS 4831
BS 4878
BS 6591
BS 6592
BS 248
BS 999
BS EN 3298
BS EN 3297
BS EN 3237
BS 3407
BS 6907 : Part 4
BS 7787
BS 2000 : Part 13
Specification for vertical spindle pulleys,
mountings and assemblies
Rope rollers, pulleys, mountings and
assemblies for colliery track haulage -Specification for suspended pulley
assemblies and clamps
Cores for inductors and transformers for
telecommunications -- Guide to the
drafting of performance specifications
Code of practice for installation of
apparatus intended for connection to
certain telecommunication systems
Specification for heavy rolling stock for
mineral haulage in mines
Specification for shackle type connector
units for chain conveyors for mining
Specification for large (vee-throated)
haulage rope pulleys for mines and quarries
Specification for scraper bars for chain
conveyers for mining
Specification for drive sprocket assemblies
for chain conveyers for mining
Specification for light rails and fishplates
for use at mines
Schedule of tests for coke ovens
BS EN 3298 Inserts, thin wall, self-locking
- Installation and removal procedure
BS EN 3297 Inserts, thin wall, self-locking,
MJ threads, in heat resisting nickel base
alloy NI-P100HT (Inconel 718) - Technical
specification
BS EN 3237 Inserts, thin wall, self-locking,
long, in heat resisting nickel base alloy NIP100HT (Inconel 718), silver plated
internal thread
Guide for assessing coke screening plant
Electrical installations for open-cast mines
and quarries -- Recommendations for
winning, stacking and processing
machinery, pumps and low signal level and
communications systems
Method for evaluation of the performance
of coal sizing equipment
Methods of test for petroleum and its
products -- Petroleum products.
Determination of carbon residue.
BS 2000 : Part 138
BS 2000 : Part 139
BS 2000 : Part 14
BS 2000 : Part 142
BS 2000 : Part 146
BS EN 3236
BS 2000 : Part 149
BS 2000 : Part 15
BS 2000 : Part 163
BS 2000 : Part 168
BS 2000 : Part 170
BS 2000 : Part 179
BS 2000 : Part 19
Conradson method
Methods of test for petroleum and its
products -- Determination of oxidation
stability of aviation fuel, Potential residue
method
Methods of test for petroleum and its
products -- Petroleum products and
lubricants, Neutralization number, Colourindicator titration method
Methods of test for petroleum and its
products -- Petroleum products.
Determination of carbon residue.
Ramsbottom method
Methods of test for petroleum and its
products -- Determination of oxidation
stability of lubricating grease, Oxygen
bomb method
Methods of test for petroleum and its
products -- Determination of foaming
characteristics of lubricating oils
BS EN 3236 Inserts, thin wall, self-locking,
short, in heat resisting nickel base alloy NIP100HT (Inconel 718), silver plated
internal thread
Methods of test for petroleum and its
products -- Petroleum products,
Lubricating oils and additives,
Determination of phosphorus content,
Quinoline phosphomolybdate method
Methods of test for petroleum and its
products -- Petroleum products.
Determination of pour point
Methods of test for petroleum and its
products -- Determination of sulfated ash
of lubricating oils and additives
Methods of test for petroleum and its
products -- Determination of rolling
bearing performance of lubricating grease
Methods of test for petroleum and its
products -- Petroleum products,
Determination of flash point, Abel closed
cup method
Methods of test for petroleum and its
products -- Determination of cone
penetration of petrolatum
Methods of test for petroleum and its
BS 2000 : Part 182
BS 2000 : Part 191
BS EN ISO 9241-7
BS 2000 : Part 195
BS 2000 : Part 218
BS 4727 : Part 3 : Group 03
BS EN ISO 9241-7
BS 4505: Part 1
BS 4505: Part 2
BS 4505: Part 3
BS 4505: Part 4
BS 4505: Part 6
BS 4505: Part 7
BS 4727 : Part 3 : Group 17
products -- Determination of demulsibility
characteristics of lubricating oil
Methods of test for petroleum and its
products -- Determination of inorganic
acidity of petroleum products. Colour
indicator titration method
Methods of test for petroleum and its
products -- Distillation of natural gasoline
BS EN ISO 9241-7 Ergonomic
requirements for office work with visual
display terminals (VDTs) - Part 7 :
Requirements for display with reflections
Methods of test for petroleum and its
products -- Determination of distillation
characteristics of volatile organic liquids
Methods of test for petroleum and its
products -- Calculation of cetane index of
diesel fuels (range 55 and above)
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Telegraphy, facsimile and data
communication
BS EN ISO 9241-7 Ergonomic
requirements for office work with visual
display terminals (VDTs) - Part 7 :
Requirements for display with reflections
Digital data transmission -- Specification
for basic mode control procedures
Digital data transmission -- Character
structure for start/stop and synchronous
transmission
Digital data transmission -- Method for use
of longitudinal parity to detect errors in
information messages
Specification for Digital Data Transmission
-- Code independent information transfer
Digital data transmission -- Complements
to the basic mode control procedures;
recovery, abort and interrupt, multiple
station selection
Digital data transmission -- Basic mode
control procedures; conversational
information message transfer
Glossary of electrotechnical, power,
BS EN ISO 10370
BS IEC 61334-1-2
BS EN 60312
BS EN 12
BS EN 22592
BS 2000 : Part 220
BS 4727 : Part 3 : Group 16
BS EN 60335-2-35
BS ISO 11948-2
BS EN 60684-3-136
BS EN 60243-1
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Transmission
Petroleum products. Determination of
carbon residue. Micro method
BS IEC 61334-1-2 Distribution automation
using distribution line carrier systems - Part
1-2 : General considerations - Guide for
specification
BS EN 60312 Vacuum cleaners for
household use - Methods for measuring the
performance
Methods of test for petroleum and its
products. Petroleum products.
Determination of Reid vapour pressure.
Wet method
Methods of test for petroleum and its
products. Petroleum products.
Determination of flash and fire points.
Cleveland open cup method
Methods of test for petroleum and its
products -- Determination of rust
prevention characteristics of lubricating
greases
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Switching and signalling in
telecommunications
BS EN 60335-2-35 Safety of household
and similar electrical appliances - Part 2-35
: Particular requirements for instantaneous
water heaters
BS ISO 11948-2 Urine-absorbing aids Part 2 : Determination of short-time liquid
release (leakage) under conditions of light
incontinence and low pressure
BS EN 60684-3-136 Flexible insulating
sleeving - Part 3 : Specification for
individual types of sleeving - Sheet 136 :
Extruded fluorosilicone sleeving - General
purpose
BS EN 60243-1 Electrical strength of
insulating materials - Test methods - Part 1
BS EN 60243-1
BS IEC 61000-5-2
BS IEC 61624
BS IEC 61624
BS 6450 : Part 7
BS EN 61069-4
BS EN 61069-4
DD ENV 12920
BS 2000 : Part 226
BS 2000 : Part 281
BS 2000 : Part 284
: Tests at power frequencies
BS EN 60243-1 Electrical strength of
insulating materials - Test methods - Part 1
: Tests at power frequencies
BS IEC 61000-5-2 Electromagnetic
compatibility (EMC) - Part 5 : Installation
and mitigation guidelines - Section 2 :
Earthing and cabling
BS IEC 61624 Guidance on the
development of lists of maximum
allowable temperatures for polymeric
compounds used in electrotechnical
equipment
BS IEC 61624 Guidance on the
development of lists of maximum
allowable temperatures for polymeric
compounds used in electrotechnical
equipment
Private branch exchanges for connection to
public switched telephone networks run by
certain public telecommunications
operators -- Specification for the procedure
for in-service observation of PBXs
undergoing type approval
BS EN 61069-4 Industrial-process
measurement and control - Evaluation of
system properties for the purpose of system
assessment - Part 4 : Assessment of system
performance
BS EN 61069-4 Industrial-process
measurement and control - Evaluation of
system properties for the purpose of system
assessment - Part 4 : Assessment of system
performance
DD ENV 12920 Characterization of waste Methodology for the determination of the
leaching behaviour of waste under
specified conditions
Methods of test for petroleum and its
products -- Petroleum products. Calculation
of viscosity index from kinematic viscosity
Methods of test for petroleum and its
products -- Determination of anti-wear
properties of hydraulic fluids. Vane pump
method
Methods of test for petroleum and its
BS 2000 : Part 230
BS 2000 : Part 272
BS 6068-5.0
BS 7755-5.3
BS EN 60335-2-85
BS EN ISO 3274
BS ISO 10791-7
BS ISO 10791-5
BS 2000 : Part 288
BS 2000 : Part 306
BS 2000 : Part 313
BS 2000 : Part 317
products -- Determination of saponifiable
and unsaponifiable matter in oils, fats and
waxes
Methods of test for petroleum and its
products -- Determination of minimum
handling and storage temperatures of fuel
oil. Ferranti viscometer method
Methods of test for petroleum and its
products -- Determination of mercaptan
sulfur and hydrogen sulfide content of
LPG. Electrometric titration method
BS 6068-5.0 Water quality - Part 5 :
Biological methods - Section 5.0 :
Selection of tests for biodegradability
BS 7755-5.3 Soil quality - Part 5 : Physical
methods - Section 5.3 : Determination of
particle density
BS EN 60335-2-85 Safety of household
and similar electrical appliances - Part 2.85
: Particular requirements for fabric
steamers
BS EN ISO 3274 Geometric Product
Specifications (GPS) - Surface texture :
Profile method - Nominal characteristics of
contact (stylus) instruments
BS ISO 10791-7 Test conditions for
machining centres - Part 7 : Accuracy of a
finished test piece
BS ISO 10791-5 Test conditions for
machining centres - Part 5 : Accuracy and
repeatability of positioning of workholding pallets
Methods of test for petroleum and its
products -- Determination of nickel,
sodium and vanadium. Atomic absorption
spectroscopy method
Methods of test for petroleum and its
products -- Determination of oxidation
stability of straight mineral oil
Methods of test for petroleum and its
products -- Determination of air release
value of hydraulic, turbine and lubricating
oils
Methods of test for petroleum and its
products -- Determination of residues in
liquefied petroleum gases. Low
BS 2000 : Part 342
BS 2000 : Part 35
BS 2000 : Part 357
BS 2000 : Part 364
BS 2000 : Part 397
BS 2000 : Part 45
BS 2000 : Part 47
BS 2000 : Part 375
BS 2000 : Part 390
BS EN 160200-1
BS 3M 45-2
BS 3M 45-2
BS 2000 : Part 49
BS 2000 : Part 50
temperature evaporation method
Methods of test for petroleum and its
products -- Gasoline, kerosine and distillate
fuels. Determination of mercaptan sulfur.
Potentiometric method
Methods of test for petroleum and its
products -- Determination of open flash
and fire point. Pensky-Martens method
Methods of test for petroleum and its
products -- Permittivity of bitumen
Methods of test for petroleum and its
products -- Calculated cetane index of
diesel fuels (range below 55)
Methods of test for petroleum and its
products -- Recovery of bitumen binders.
Dichloromethane extraction rotary film
evaporator method
Methods of test for petroleum and its
products -- Determination of loss on
heating of bitumen and flux oil
Methods of test for petroleum and its
products -- Solubility of bituminous
binders
Methods of test for petroleum and its
products -- Petroleum products. Total
sediment in residual fuel oils.
Determination by hot filtration
Methods of test for petroleum and its
products -- Petroleum products. Total
sediment in residual fuel oils.
Determination using standard procedures
for ageing
BS EN 160200-1 Harmonized system of
quality assessment for electronic
components - Sectional specification:
Microwave modular electronic units of
assessed quality - Part 1 : Capability
approval procedure
BS 3M 45-2 Aircraft tyres and rims - Part 2
: Test methods for tyres
BS 3M 45-2 Aircraft tyres and rims - Part 2
: Test methods for tyres
Methods of test for petroleum and its
products -- Determination of needle
penetration of bituminous material
Methods of test for petroleum and its
BS 4078 : Part 1
BS 2000 : Part 57
BS 2000 : Part 58
BS 2000 : Part 61
BS 2000 : Part 71 : Section 71.2
BS 2000 : Part 72
BS EN 10111
BS 2000 : Part 76
BS 3195 : Part 1
BS 3195 : Part 3
BS 5089
BS 5579
BS 5859
BS 6664 : Part 4
BS EN ISO 389-7
products -- Determination of cone
penetration of lubricating grease
BS 4078 : Part 1 Powder actuated fixing
systems - Part 1 : Code of practice for safe
use
Methods of test for petroleum and its
products -- Petroleum products.
Determination of the smoke point of
kerosine
Methods of test for petroleum and its
products -- Determination of softening
point of bitumen. Ring and ball method
Methods of test for petroleum and its
products -- Determination of sulfur. Bomb
method
Methods of test for petroleum and its
products -- Specifications and operating
instructions for glass capillary kinematic
viscometers
Methods of test for petroleum and its
products -- Determination of viscosity of
cutback bitumen
BS EN 10111 Continuously hot-rolled low
carbon steel sheet and strip for cold
forming - Technical delivery conditions
Methods of test for petroleum and its
products -- Determination of congealing
point of waxes and petrolatum
Methods for sampling petroleum products - Manual sampling of liquid hydrocarbons
Methods for sampling petroleum products - Method for sampling bituminous binders
Method for determination of bromine
number of petroleum distillates and
commercial aliphatic olefins by the
electrometric method
Specification for standard reference
conditions for measurement of petroleum
liquids and gases
Method for determination of colour of
petroleum products
Flashpoint of petroleum and related
products -- Method for determination of
flashpoint (rapid equilibrium method)
BS EN ISO 389-7 Acoustics - Reference
zero for the calibration of audiometric
BS 6312
BS 7011 : Part 1 : Section 1.1
BS 7392
BS 7393
BS 7576
BS ISO 6155
BS EN 60495
BS EN ISO 2160
BS ISO 2407
BS EN 60931-1
BS EN 61270-1
BS EN 60831-1
BS EN 55014-2
BS 6328 : Part 7
BS IEC 60695-2-20
equipment - Part 7 : Reference threshold of
hearing under free-field and diffuse-field
listening conditions
Specification for plugs for use with British
Telecommunications line jack units
Consumable accessories for light
microscopes -- Immersion oils -Specification for immersion oils for general
use
Method for determination of distillation
characteristics of petroleum products
Method for determination of total acid
number in petroleum products by
semimicro colour indicator titration
Method for continuous sampling of
liquefied natural gas (LNG) in transfer
pipelines
BS ISO 6155 Machine tools - Test
conditions for horizontal spindle turret and
single spindle automatic lathes - Testing of
the accuracy
Single sideband power-line carrier
terminals
Petroleum products. Corrosiveness to
copper. Copper strip test
BS ISO 2407 Test Conditions for internal
cylindrical grinding machines with
horizontal spindle - Testing of accuracy
NULL
BS EN 61270-1 Capacitors for microwave
ovens - Part 1 : General
NULL
BS EN 55014-2 Electromagnetic
compatibility - Requirements for household
appliances, electric tools and similar
apparatus - Part 2 : Immunity - Product
family standard
Apparatus for connection to private circuits
run by certain public telecommunication
operators -- Specification for apparatus for
connection to digital circuits according to
CCITT Recommendation X.21 bis
BS IEC 60695-2-20 Fire hazard testing Part 2 : Glowing/Hot wire based test
methods - Section 20 : Hot-wire coil
ignitability test on materials
BS IEC 60695-2-20
BS G 262
BS EN ISO 6872
BS 7430
BS 7430
BS EN 60335-2-4
BS 6328 : Part 8 : Section 8.1
BS 6328 : Part 8 : Section 8.2
BS 6789 : Part 1
BS EN 61191-2
DD ENV 1402-3
DD ENV ISO 13530
BS 7755-1.2
BS IEC 60695-2-20 Fire hazard testing Part 2 : Glowing/Hot wire based test
methods - Section 20 : Hot-wire coil
ignitability test on materials
BS G 262 Aircraft - Declaration of design
and performance for aircraft equipment Standard form
BS EN ISO 6872 Dental ceramic
BS 7430 Code of practice for Earthing
BS 7430 Code of practice for Earthing
BS EN 60335-2-4 Specification for Safety
of household and similar electrical
appliances - Part 2 : Particular requirements
- Section 2.4 : Spin extractors
Apparatus for connection to private circuits
run by certain public telecommunication
operators -- Specification for apparatus for
connection to digital circuits with
interfaces according to CCITT G-series
Recommendations -- G.703 services at
2048 kbit/s a
Apparatus for connection to private circuits
run by certain public telecommunication
operators -- Specification for apparatus for
connection to digital circuits with
interfaces according to CCITT G-series
Recommendations -- G.703 64 kbit/s
service using c
Apparatus with one or more particular
functions for connection to public switched
telephone networks run by certain public
telecommunications operators -Specification for general requirements
BS EN 61191-2 Printed board assemblies Part 2 : Sectional specification Requirements for surface mount soldered
assemblies
DD ENV 1402-3 Unshaped refractory
products - Part 3 : Characterization as
received
DD ENV ISO 13530 Water quality - Guide
to analytical quality control for water
analysis
BS 7755-1.2 Soil quality - Part 1 :
Terminology and classification - Section
1.2 : Terms and definitions relating to
BS 7755-1.2
BS EN ISO 10993-13
BS 6789 : Part 6 : Section 6.1
BS 6789 : Part 6: Section 6.2
BS 7606
BS EN 60244-8
BS 2626
BS 4231
BS EN 61189-3
BS ISO 5348
BS EN 60601-2-45
sampling
BS 7755-1.2 Soil quality - Part 1 :
Terminology and classification - Section
1.2 : Terms and definitions relating to
sampling
BS EN ISO 10993-13 Biological
evaluation of medical devices - Part 13 :
Identification and quantification of
degradation products from polymeric
medical devices
Apparatus with one or more particular
functions for connection to public switched
telephone networks run by certain public
telecommunications operators -Specification for series connected
apparatus -- Apparatus having maximum
allowable impairments
Apparatus with one or more particular
functions for connection to public switched
telephone networks run by certain public
telecommunications operators -Specification for series connected
apparatus -- Apparatus having less than
maximum allowable impairm
Specification for social alarm system
apparatus for connection to public switched
telephone networks
Performance characteristics of vestigialsideband demodulators used for testing
television transmitters and transposers
Specification for lubricants for refrigerant
compressors
Classification for viscosity grades of
industrial liquid lubricants
BS EN 61189-3 Test methods for electrical
materials, printed boards and other
interconnection structures and assemblies Part 3 : Test methods for interconnection
structures (printed boards)
BS ISO 5348 Mechanical vibration and
shock - Mechanical mounting of
accelerometers
BS EN 60601-2-45 Medical electrical
equipment - Part 2-45 : Particular
requirements for safety - Specification for
mammographic X-ray equipment and
BS EN ISO 13002
BS ISO 10791-3
BS EN 55104
BS ISO/IEC ISP 11186-4
BS EN 61032
BS EN ISO 8253-3
BS EN ISO 8253-1
PD 6561
PD 6564
PD 6565
mammographic stereotactic devices
BS EN ISO 13002 Carbon fibre Designation system for filament yarns
BS ISO 10791-3 Test conditions for
machining centres - Part 3 : Geometric tests
for machines with integral indexable or
continuous universal heads (vertical Z-axis)
BS EN 55104 Electromagnetic
compatibility - Immunity requirements for
household appliances, tools and similar
apparatus - Product family standard
BS ISO/IEC ISP 11186-4 Information
technology - International Standardized
Profiles FVT3nn - Virtual Terminal Basic
Class - Register of attribute assignment
type definitions - Part 4 : FVT322 - Font
Assignment Type No. 2
BS EN 61032 Protection of persons and
equipment by enclosures - Probes for
verification
BS EN ISO 8253-3 Acoustics Audiometric test methods - Part 3 : Speech
audiometry
BS EN ISO 8253-1 Acoustics Audiometric test methods - Part 1 : Basic
pure tone air and bone conduction
threshold audiometry
A draft amendment to BS 6789 : Part 1 :
1984 "Apparatus with one or more
particular functions for connection to the
British Telecommunications public
switched telephone network. Part 1.
Specification for general requirements"
A draft amendment to BS 6789: Section
6.1 : 1986 "Apparatus with one or more
particular functions for connection to
certain public switched telephone
networks. Part 6. Specification for series
connected apparatus. Section 6.1.
Apparatus having maximum all
A draft amendment to BS 6789 : Section
6.2 : 1989 "Apparatus with one or more
particular functions for connection to
public switched telephone networks run by
certain public telecommunications
operators. Part 6. Specification for series
PD 7006
BS 6656
BS EN 60244-11
BS 5306 : Part 2
BS 4078 : Part 2
BS ISO 3087
BS 7016-7
BS 7016-7
BS 7698-10
BS 7698-10
BS ISO 11565
BS ISO 12156-2
PD 6638
BS EN ISO 5659-2
connected apparatu
Essential requirements for terminal
equipment intended for connection to
digital interfaces of the PSTN using
channel associated signalling
Guide to prevention of inadvertent ignition
of flammable atmospheres by radiofrequency radiation
Methods of measurement for radio
transmitters -- Transposers for FM sound
broadcasting
BS 5306 : Part 2 Fire extinguishing
installations and equipment on premises Part 2 : Specification for sprinkler systems
BS 4078 : Part 2 Powder actuated fixing
systems - Part 2 : Specification for tools
BS ISO 3087 Iron ores - Determination of
the moisture content of a lot BS 7016-7 Reciprocating internal
combustion engines - Vocabulary of
components and systems - Part 7 :
Governing systems
BS 7016-7 Reciprocating internal
combustion engines - Vocabulary of
components and systems - Part 7 :
Governing systems
BS 7698-10 Reciprocating internal
combustion engine driven alternating
current generating sets - Part 10 :
Measurement of airborne noise by the
enveloping surface method
BS 7698-10 Reciprocating internal
combustion engine driven alternating
current generating sets - Part 10 :
Measurement of airborne noise by the
enveloping surface method
BS ISO 11565 Road vehicles - Spark plugs
- Test methods and requirements
BS ISO 12156-2 Diesel fuel - Assessment
of lubricity using the high-frequency
reciprocating rig (HFRR) - Part 2 : Limit
PD 6638 PNO-ISC Specification Number
003 C7 Interconnect Signalling Connection
Control Part (SCCP)
BS EN ISO 5659-2 Plastics - Smoke
generation - Part 2 : Determination of
BS EN ISO 5659-2
BS EN ISO 1564
BS EN ISO 3823-1
BS 4959
BS 5063
BS 6413 : Part 0
BS 4832
BS ISO 13740
BS ISO 2943
BS EN 62020
BS EN 60534-2-1
BS EN 60534-2-1
BS 7755-5.6
BS 7755-5.5
BS ISO 10303-49
optical density by a single chamber test
BS EN ISO 5659-2 Plastics - Smoke
generation - Part 2 : Determination of
optical density by a single chamber test
BS EN ISO 1564 Dental aqueous
impression materials based on agar
BS EN ISO 3823-1 Dental rotary
instruments - Burs - Part 1 : Steel and
carbide burs
Recommendations for corrosion and scale
prevention in engine cooling water systems
Classification for rationalized range of
lubricants for machine tool application
Lubricants, industrial oils and related
products (class L) -- Classification
(general)
Specification for compatibility between
elastomeric materials and hydraulic fluids
BS ISO 13740 Crude petroleum and
petroleum products - Transfer
accountability - Assessment of vessel
experience factor on loading (VEFL) and
vessel experience factor on discharging
(VEFD) of ocean-going tanker vessels
BS ISO 2943 Hydraulic fluid power - Filter
elements - Verification of material
compatibility with fluids
BS EN 62020 Electrical accessories Residual current monitors for household
and similar uses (RCMs)
BS EN 60534-2-1 Industrial-process
control valves - Part 2-1 : Flow capacity Sizing equations for fluid flow under
installed conditions
BS EN 60534-2-1 Industrial-process
control valves - Part 2-1 : Flow capacity Sizing equations for fluid flow under
installed conditions
BS 7755-5.6 : 1999 Soil quality - Part 5 :
Physical methods - Section 5.6 :
Determination of dry bulk density
BS 7755-5.5 Soil quality - Part 5 : Physical
methods - Section 5.5 : Determination of
the water retention characteristic Laboratory methods
BS ISO 10303-49 Industrial automation
BS ISO 10303-32
BS ISO 13584-42
BS 5605
BS EN ISO 10472-1
BS ISO/IEC ISP 12067-2
BS 5540 : Part 1
BS 5540 : Part 5
BS 5540 : Part 7
BS ISO/IEC 15771
BS ISO/IEC 15771
systems and integration - Product data
representation and exchange - Part 49 :
Integrated generic resources: Process
structure and properties
BS ISO 10303-32 Industrial automation
systems and integration - Product data
representation and exchange - Part 32 :
Conformance testing methodology and
framework: Requirements on testing
laboratories and clients
BS ISO 13584-42 Industrial automation
systems and integration - Parts library Part 42 : Description methodology :
Methodology for structuring part families
BS 5605 Recommendations for Citing and
referencing published material
BS EN ISO 10472-1 Safety requirements
for industrial laundry machinery - Part 1 :
Common requirements (ISO 10472-1 :
1997)
BS ISO/IEC ISP 12067-2 Information
technology - International Standardized
Profile RB - Relaying the connection-mode
Network Service - Part 2 : LAN
subnetwork-dependent media-independent
requirements
Evaluating particulate contamination of
hydraulic fluids -- Qualifying and
controlling of cleaning methods for sample
containers
Evaluating particulate contamination of
hydraulic fluids -- Method of reporting
contamination analysis data
Evaluating particulate contamination of
hydraulic fluids -- Method of determining
the level of contamination (by the
gravimetric method)
BS ISO/IEC 15771 Information technology
- Telecommunications and information
exchange between systems - Private
Integrated Services Network Specification, functional model and
information flows - Common information
additional network feature
BS ISO/IEC 15771 Information technology
- Telecommunications and information
BS ISO/IEC 8473-1
BS EN 12373-8
BS EN 12373-8
PD 7004
PD 7024
BS EN 60654-2
BS EN 60654-3
BS 4727 : Part 3 : Group 06
BS 4727 : Part 3 : Group 07
exchange between systems - Private
Integrated Services Network Specification, functional model and
information flows - Common information
additional network feature
BS ISO/IEC 8473-1 Information
technology - Protocol for providing the
connectionless-mode network service - Part
1 : Protocol specification
BS EN 12373-8 Aluminium and aluminium
alloys - Anodizing - Part 8 : Determination
of the comparative fastness to ultra-violet
light and heat of coloured anodic oxidation
coatings
BS EN 12373-8 Aluminium and aluminium
alloys - Anodizing - Part 8 : Determination
of the comparative fastness to ultra-violet
light and heat of coloured anodic oxidation
coatings
Essential requirements for terminal
equipment intended for connection to
digital interfaces of the PSTN using Digital
Access Signalling System No.2 (DASS 2)
Essential requirements for terminal
equipment intended for connection to
unstructured digital leased circuits of the
public telecommunications network using a
CCITT Recommendation G.703 interface
at a rate of 2048 kbit/s with a 75 ê
unbalanced presentatio
BS EN 60654-2 Operating conditions for
industrial-process measurement and control
equipment - Part 2 : Power
BS EN 60654-3 Operating conditions for
industrial-process measurement and control
equipment - Part 3 : Mechanical influences
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Radio location and navigation terminology
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms particular to
telecommunications and electronics -Radiocommunication terminology
BS EN 60130-9
BS EN 60654-4
BS EN 50131-6
BS 7573 : Part 2 : Section 2.4
DD ENV 10247
BS ISO 6301-1
BS ISO 6301-1
BS ISO 7789
BS EN ISO 3386-2
BS EN 61097-1
BS 6413 : Part 3 : Section 3.2
BS EN ISO 4583
BS EN 60130-9 Connectors for frequencies
below 3 MHz - Part 9 : Circular connectors
for radio and associated sound equipment
BS EN 60654-4 Operating conditions for
industrial-process measurement and control
equipment - Part 4 : Corrosive and erosive
influences
BS EN 50131-6 Alarm systems - Intrusion
systems - Part 6 : Power supplies
Methods of measurement for equipment
used in digital microwave radio
transmission systems -- Measurements on
terrestrial radio-relay systems -Transmitter/receiver including
modulator/demodulator
DD ENV 10247 Micrographic examination
of the nonmetallic inclusion content of
steels using standard pictures
BS ISO 6301-1 Pneumatic fluid power Compressed air lubricators - Part 1 : Main
characteristics to be included in suppliers
literature and product-marking
requirements
BS ISO 6301-1 Pneumatic fluid power Compressed air lubricators - Part 1 : Main
characteristics to be included in suppliers
literature and product-marking
requirements
BS ISO 7789 Hydraulic fluid power - Two, three- and four-port screw-in cartridge
valves - Cavities
BS EN ISO 3386-2 Flexible cellular
polymeric materials - Determination of
stress-strain characteristics in compression
- Part 2 : High-density materials
Global maritime distress and safety system
(GMDSS) -- Radar transponder. Marine
search and rescue (SART). Operational and
performance requirements, methods of
testing and required test results
Lubricants, industrial oils and related
products (class L) -- Classification for
family D (compressors) -- Gas and
refrigeration compressors
BS EN ISO 4583 Plastics - Epoxy resins
and related materials - Determination of
BS 7573 : Part 1 : Section 1.4
BS 7573 : Part 3 : Section 3.12
BS 3882
BS EN 22719
BS EN ISO 11210
BS ISO 1625
BS ISO 14910-1
BS 7573 : Part 3 : Section 3.4
BS EN 60835-2-10
BS 6808 : Part 3
BS 2486
BS EN 60835-2-5
easily saponifiable chlorine
Methods of measurement for equipment
used in digital microwave radio
transmission systems -- Measurements
common to terrestrial radio-relay systems
and satellite earth stations -- Transmission
performance
Methods of measurement for equipment
used in digital microwave radio
transmission systems -- Measurements on
satellite earth stations -- Overall system
performance
BS 3882 Specification for Topsoil
Methods of test for petroleum and its
products. Petroleum products and
lubricants. Determination of flash point.
Pensky-Martens closed cup method
Determination of platinum in platinum
jewellery alloys. Gravimetric method after
precipitation of diammonium
hexachloroplatinate
BS ISO 1625 Plastics - Polymer
dispersions - Determination of non-volatile
matter (residue) at specified temperatures
BS ISO 14910-1 Plastics - Thermoplastic
polyester/ester and polyether/ester
elastomers for moulding and extrusion Part 1 : Designation system and basis for
specifications
Methods of measurement for equipment
used in digital microwave radio
transmission systems -- Measurements on
satellite earth stations -- Low noise
amplifier
Methods of measurement for equipment
used in digital microwave radio
transmission systems. Measurements on
terrestrial radio-relay systems. Overall
system performance
BS 6808 : Part 3 Coordinate measuring
machines - Part 3 : Code of practice
BS 2486 Recommendations for Treatment
of water for steam boilers and water heaters
Methods of measurement for equipment
used in digital microwave radio
transmission systems -- Methods of
BS EN 60835-2-6
BS 2486
BS ISO 4433-4
BS EN 60835-2-7
BS EN 60835-2-8
BS ISO 14910-2
BS EN ISO 11490
BS 5540 : Part 3
BS 5540 : Part 4
BS 5540 : Part 2
measurement for equipment used in digital
microwave radio transmission systems.
Measurements on terrestrial radio-relay
systems -- Digital signal proce
Methods of measurement for equipment
used in digital microwave radio
transmission systems -- Methods of
measurement for equipment used in digital
microwave radio transmission systems.
Measurements on terrestrial radio-relay
systems -- Protection switching
BS 2486 Recommendations for Treatment
of water for steam boilers and water heaters
BS ISO 4433-4 Thermoplastics pipes Resistance to liquid chemicals Classification Part 4 : Poly(vinylidene
fluoride) (PVDF) pipes
Methods of measurement for equipment
used in digital microwave radio
transmission systems -- Methods of
measurement for equipment used in digital
microwave radio transmission systems.
Measurements on terrestrial radio-relay
systems -- Diversity switching
Methods of measurement for equipment
used in digital microwave radio
transmission system -- Measurement on
terrestrial radio-relay systems -- Adaptive
equalizar
BS ISO 14910-2 Plastics - Thermoplastic
polyester/ester and polyether/ester
elastomers for moulding and extrusion Part 2 : Preparation of test specimens and
determination of properties
Determination of palladium in palladium
jewellery alloys. Gravimetric method with
dimethyl glyoxime
Evaluating particulate contamination of
hydraulic fluids -- Methods of bottling
fluid samples
Evaluating particulate contamination of
hydraulic fluids -- Method of defining
levels of contamination (solid contaminant
code)
Evaluating particulate contamination of
hydraulic fluids -- Method of calibrating
BS ISO 7792-2
BS EN 60984
BS 5540 : Part 6
BS EN 28653
BS 5540 : Part 8
BS EN 28654
BS 7287
BS EN 29202
BS EN 61079-1
BS EN 61079-2
BS EN 61079-3
BS EN 61079-5
DD 225
BS EN 31426
liquid automatic particle-count instruments
(using AC Fine Test Dust contaminant)
BS ISO 7792-2 Plastics - Thermoplastic
polyester (TP) moulding and extrusion
materials - Part 2 : Preparation of test
specimens and determination of properties
BS EN 60984 Specification for Sleeves of
insulating material for live working
Evaluating particulate contamination of
hydraulic fluids -- Method of calibrating
liquid automatic particle-count instruments
(using mono-sized latex spheres)
Jewellery. Ring-sizes. Definition,
measurement and designation
Evaluating particulate contamination of
hydraulic fluids -- Method of determining
the level of contamination (by the counting
method using a microscope)
Colours of gold alloys. Definition, range of
colours and designation
Guide for the use of fire-resistant hydraulic
fluids
Jewellery. Fineness of precious metal
alloys
Methods of measurement on receivers for
satelite broadcast transmissions in the 12
GHz band -- Radio-frequency
measurements on outdoor units
Methods of measurement on receivers for
satelite broadcast transmissions in the 12
GHz band -- Electrical measurements on
DBS tuner units
Methods of measurement on receivers for
satelite broadcast transmissions in the 12
GHz band -- Electrical measurements of
overall performance of receiver systems
comprising an outdoor unit and a DBS
tuner unit
Methods of measurement on receivers for
satelite broadcast transmissions in the 12
GHz band -- Electrical measurements on
decoder units for MAC/packet systems
Determination of anti-wear properties of
hydraulic fluids using the oscillating pin on
rotating disc method
Determination of gold in gold jewellery
BS EN 31427
BS 76
BS 6513 : Part 1
BS 434 : Part 1
BS 594: Part 1
DD 215
BS 598 : Part 100
BS EN 50083-2
BS EN 60076-1
BS ISO/TR 10828
BS ISO/TR 10495
BS EN 50083-3
BS ISO/TR 15069
BS ISO/TR 9494
BS EN ISO 11688-1
BS EN ISO 11688-1
alloys. Cupellation method (fire assay)
Determination of silver in silver jewellery
alloys. Volumetric (potentiometric) method
using potassium bromide
Specification for tars for road purposes
Wideband cabled distribution systems -Glossary of terms
Bitumen road emulsions (anionic and
cationic) -- Specification for bitumen road
emulsions
Hot rolled asphalt for roads cud other
paved areas -- Specification for constituent
materials and asphalt mixures
Specification for validation of metal
temperature in the heat treatment of steels
for pressure purposes
Sampling and examination of bituminous
mixtures for roads and other paved areas -Methods for sampling for analysis
Cabled distribution systems for television
and sound signals -- Electromagnetic
compatibility for equipment
BS EN 60076-1 Power transformers - Part
1 : General
BS ISO/TR 10828 Worm gears - Geometry
of worm profiles
BS ISO/TR 10495 Cylindrical gears Calculation of service life under variable
load - Conditions for cylindrical gears in
accordance with ISO 6336
Cabled distribution systems for television
and sound signals -- Active coaxial
wideband distribution equipment
BS ISO/TR 15069 Series 1 freight
containers - Handling and securing Rationale for ISO 3874 Annex A
BS ISO/TR 9494 Petroleum liquids Automatic pipeline sampling - Statistical
assessment of performance of automatic
samplers determining the water content in
hydrocarbon liquids
BS EN ISO 11688-1 Acoustics Recommended practice for the design of
low-noise machinery and equipment - Part
1 : Planning
BS EN ISO 11688-1 Acoustics -
BS 598 : Part 105
BS EN 50083-4
BS EN 50083-5
BS EN 50083-6
BS EN ISO 11690-3
BS EN ISO 11690-3
BS 131 : Part 1
BS 131 : Part 4
BS 131 : Part 5
BS 131 : Part 6
BS 427
BS 1676
BS EN 287-1
BS EN 61189-1
Recommended practice for the design of
low-noise machinery and equipment - Part
1 : Planning
Sampling and examination of bituminous
mixtures for roads and other paved areas -Methods of test for the determination of
texture depth
Cabled distribution systems for television
and sound signals -- Passive coaxial
wideband distribution equipment
Cabled distribution systems for television
and sound signals -- Headend equipment
Cabled distribution systems for television
and sound signals -- Optical equipment
BS EN ISO 11690-3 Acoustics Recommended practice for the design of
low-noise workplaces containing
machinery - Part 3 : Sound propagation and
noise prediction in workrooms
BS EN ISO 11690-3 Acoustics Recommended practice for the design of
low-noise workplaces containing
machinery - Part 3 : Sound propagation and
noise prediction in workrooms
Notched bar tests -- The Izod impact test of
metals
Notched bar tests -- Calibration of
pendulum impact testing machines for
metals
Notched bar tests -- Determination of
crystallinity
Notched bar tests -- Method for precision
determinations of Charpy V-notch impact
energies for metals
Method for Vickers hardness test and for
verification of Vickers hardness testing
machines
Specification for heaters for tar and
bitumen (mobile and transportable)
BS EN 287-1 Approval testing of welders
for fusion welding - Part 1 : Steels
BS EN 61189-1 Test methods for electrical
materials, printed boards and other
interconnection structures and assemblies Part 1 : General test methods and
methodology
BS 3135
BS 1858
BS 1610 : Part 1
BS 1639
BS 3690 : Part 1
BS EN 61189-2
BS 3690 : Part 2
BS 3690 : Part 3
BS 3500 : Part 1
BS EN ISO 8985
BS EN 60903
BS EN 60835-2-4
BS 3500 : Part 3
DD ENV 41113
BS 4695
BS 3135 Specification for Gas turbine
acceptance tests
Specification for bitumen-based filling
compounds for electrical purposes
Materials testing machines and force
verification equipment -- Specification for
the grading of the forces applied by
materials testing machines when used m
the compression mode
Methods for bend testing of metals
Bitumens for building and civil engineering
-- Specification for bitumens for roads and
other paved areas
BS EN 61189-2 Test methods for electrical
materials, printed boards and other
interconnection structures and assemblies Part 2 : Test methods for materials for
interconnection structures
Bitumens for building and civil engineering
-- Specification for bitumens for industrial
purposes
Bitumens for building and civil engineering
-- Specification for mixtures of bitumen
with pitch, tar and Trinidad lake asphalt
Methods for creep and rupture testing of
metals Tensile rupture testing
BS EN ISO 8985 Plastics - Ethylene/vinyl
acetate copolymer (EVAC) thermoplastics
- Determination of vinyl acetate content
BS EN 60903 Specification for Gloves and
mitts of insulating material for live
working
BS EN 60835-2-4 Methods of
measurement for equipment used in digital
microwave radio transmission systems Part 2 : Measurements on terrestrial radiorelay systems - Section 2.4 :
Transmitter/receiver including
modulator/demodulator
Methods for creep and rupture testing of
metals Tensile creep testing
Information technology. Functional
standard for profiles T/C 4311 and T/D
4311. ISDN (public/private). Packet mode
service. D-channel. Virtual call (VC)
Method for determination of melting of
BS 4987:Part 1
BS EN 50098-1
BS 4987:Part 2
BS 5273
BS 5284
BS 6043 : Part 1 : Section 1.11
BS 1597
BS 4727 : Part 1 : Group 09
BS 5049:Part 2
BS 5049:Part 3
BS 5406 : Part 1
BS 5406 : Part 3
petroleum wax (cooling curve)
Coated macadam for roads and other paved
areas -- Specification for constituent
materials and for mixtures
Customer premises cabling for information
technology -- ISDN basic access
Coated macadam for roads and other paved
areas -- Specification for transport, laying
and compaction
Specification. Dense tar surfacing for roads
and other paved areas
Methods of sampling and testing mastic
asphalt used in building and civil
engineering
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode pitch -Determination of the atomic C/H ratio of
the quinoline-insoluble material
Specification for limits and methods of
measurement of electromagnetic
interference generated by marine
equipment and installations
Glossary of electrotechnical, power,
telecommunication, electronics, lighting
and colour terms -- Terms common to
power, telecommunications and electronics
-- Electromagnetic compatibility
Radio interference characteristics of
overhead power lines and high-voltage
equipment -- Methods of measurement and
procedure for determining limits
Radio interference characteristics of
overhead power lines and high-voltage
equipment -- Code of practice for
minimizing the generation of radio noise
Disturbances in supply systems caused by
household appliances and similar electrical
equipment -- Disturbances in supply
systems caused by household appliances
and similar electrical equipment. Glossary
of terms
Disturbances in supply systems caused by
household appliances and similar electrical
equipment -- Specification of voltage
fluctuations
BS 6130 : Part 1
BS 6925
CP 144 : Part 4
DD 213
DD 226
BS 3500 : Part 5
BS 6667 : Part 1
BS 3500 : Part 6
BS 6667 : Part 3
BS 3518 : Part 1
BS 3518 : Part 2
BS 3518 : Part 3
BS 3518 : Part 5
BS AU 243 : Part 1
BS 6843 : Part 0
BS 7027
BS 3855
Hose and hose assemblies for asphalt and
bitumen -- Specification for flexible
metallic hose and hose assemblies
Specification for mastic asphalt for
building and civil engineering (limestone
aggregate)
Roof coverings -- Mastic asphalt. Metric
units
Method for determination of the indirect
tensile stiffness modulus of bituminous
mixtures
Method for determining resistance to
permanent deformation of bituminous
mixtures subject to unconfined dynamic
loading
Methods for creep and rupture testing of
metals Production acceptance tests
Electromagnetic compatibility for
industrial-process measurement and control
equipment -- General introduction
Methods for creep and rupture testing of
metals Tensile stress relaxation testing
Electromagnetic compatibility for
industrial-process measurement and control
equipment -- Method of evaluating
susceptibility to radiated electromagnetic
energy
Methods of fatigue testing Methods of
fatigue testing. Guide to general principles
Methods of fatigue testing Rotating
bending fatigue tests
Methods of fatigue testing Direct stress
fatigue tests
Methods of fatigue testing Guide to the
application of statistics
Methods of test for electrical disturbance
by conduction and coupling -- General
Classification of petroleum fuels -- General
classification
Specification for limits and methods of
measurement of the immunity of marine
electrical and electronic equipment to
conducted and radiated electromagnetic
interference
Method for modified Erichsen cupping test
for sheet and strip metal
BS AU 243 : Part 2
BS 6843 : Part 2
BS 6843 : Part 3
BS 3894 : Part 1
BS 7420
BS 3894 : Part 2
BS EN 60947-6-1
BS ISO/IEC 9579-2
BS EN 133200
BS 6729
BS 1016 : Part 1
BS 1016 : Part 10
BS 1016 : Part 100
BS 1016 : Part 104 : Section 104.1
BS 1016 : Part 104 : Section 104.2
Methods of test for electrical disturbance
by conduction and coupling -- Electrical
transient conduction along supply lines
only on passenger cars and light
commercial vehicles with 12 V supply
Classification of petroleum fuels -- Gas
turbine fuels for industrial and marine
applications
Classification of petroleum fuels -Liquefied petroleum gases
Method for converting elongation values
for steel -- Carbon and low alloy steels
Guide for determination of Calorific values
of solid, liquid and gaseous fuels (including
definitions)
Method for eonverting elongation values
for steel -- Method of conversion for
application to austenitic steels
BS EN 60947-6-1 Specification for Lowvoltage switchgear and controlgear - Part 6
: Multiple function equipment - Section 1 :
Automatic transfer switching equipment
BS ISO/IEC 9579-2 Information
Technology - Open Systems
Interconnection - Remote Database Access
- Part 2 : SQL Specialization
Harmonized system of quality assessment
for electronic components. Sectional
specification : passive filter units for
electromagnetic interference suppression
(filters for which safety tests are required)
Method for determination of the dynamic
fracture toughness of metallic materials
Methods for analysis and testing of coal
and coke -- Total moisture of coal
Methods for analysis and testing of coal
and coke -- Arsenic in coal and coke
Methods for analysis and testing of coal
and coke -- General introduction and
methods for reporting results
Methods for analysis and testing of coal
and coke -- Proximate analysis -Determination of moisture content of the
general analysis sample of coal
Methods for analysis and testing of coal
and coke -- Proximate analysis --
BS 6835
BS 1016 : Part 104 : Section 104.3
BS 1016 : Part 104 : Section 104.4
BS 1016 : Part 105
BS 1016 : Part 106 : Section 106.4 :
Subsection 10
BS 1016 : Part 107 : Section 107.1
BS 1016 : Part 107 : Section 107.2
BS 1016 : Part 107 : Section 107.3
BS 7270
BS EN 60079-14
BS 1016 : Part 108 : Section 108.2
BS 1016 : Part 108 : Section 108.3
BS 1016 : Part 108 : Section 108.4
Determination of moisture content of the
general analysis sample of coke
Method for determination of the rate of
fatigue crack growth in metallic materials
Methods for analysis and testing of coal
and coke -- Proximate analysis -Determination of volatile matter content
Methods for analysis and testing of coal
and coke -- Proximate analysis -Determination of ash
Methods for analysis and testing of coal
and coke -- Determination of gross calorific
value
Methods for analysis and testing of coal
and coke -- Ultimate analysis of coal and
coke -- Determination of total sulfur
content -- Eschka method
Methods for analysis and testing of coal
and coke -- Caking and swelling properties
of coal -- Determination of crucible
swelling number
Methods for analysis and testing of coal
and coke -- Caking and swelling properties
of coal -- Assessment of caking power by
Gray-King coke test
Methods for analysis and testing of coal
and coke -- Caking and swelling properties
of coal -- Determination of swelling
properties using a dilatometer
Method for constant amplitude strain
controlled fatigue testing
BS EN 60079-14 Electrical apparatus for
explosive gas atmospheres - Part 14 :
Electrical installations in hazardous areas
(other than mines)
Methods for analysis and testing of coal
and coke -- Tests special to coke -Determination of Micum and Irsid indices
Methods for analysis and testing of coal
and coke -- Tests special to coke -Determination of bulk density (small
container)
Methods for analysis and testing of coal
and coke -- Tests special to coke -Determination of bulk density (large
container)
BS 1016 : Part 109
BS 7448 : Part 1
BS ISO 13344
BS 1016 : Part 111
BS 1016 : Part 112
BS 1016 : Part 113
BS 1016 : Part 2
BS 1016 : Part 6
BS 1016 : Part 7
DD 186
BS 1016 : Part 9
BS 1017 : Part 2
BS 3142 : Part 3
BS 7012-10-10.1
BS ISO 14269-1
BS 3142 : Part 2
Methods for analysis and testing of coal
and coke -- Size analysis of coal
Fracture mechanics toughness tests -Method for determination of
K<inf>Ic</inf> critical CTOD and critical
J values of metallic materials
BS ISO 13344 Determination of the lethal
toxic potency of fire effluents
Methods for analysis and testing of coal
and coke -- Determination of abrasion
index of coal
Methods for analysis and testing of coal
and coke -- Determination of Hardgrove
grindability index of hard coal
Methods for analysis and testing of coal
and coke -- Determination of ash fusibility
Methods for analysis and testing of coal
and coke -- Total moisture of coke
Methods for analysis and testing of coal
and coke -- Ultimate analysis of coal
Methods for analysis and testing of coal
and coke -- Ultimate analysis of coke
Method for determination of threshold
stress intensity factors and fatigue crack
growth rates in metallic materials
Methods for analysis and testing of coal
and coke -- Phosphorus in coal and coke
Sampling of coal and coke -- Methods for
sampling of coke
Specification for manufactured solid
smokeless fuels for household use -Specially reactive fuels for all types of
domestic open fire
BS 7012-10-10.1 Light microscopes - Part
10 : Minimum requirements for stereo
microscopes - Section 10.1 : Stereo
microscopes for general use
BS ISO 14269-1 Tractors and selfpropelled machines for agriculture and
forestry - Operator enclosure environment Part 1 : Vocabulary
Specification for manufactured solid
smokeless fuels for household use -- Cokes
for domestic openable and closed
appliances and open fires with fan-assisted
primary air
BS IEC 1000-3-5
BS EN 10002-1
BS 3323
BS EN 10002-2
BS EN 10002-4
BS EN 10002-5
BS 3552
BS EN 10003-2
BS EN 10003-3
BS 3553
BS ISO 14269-1
BS EN 50082-2
BS 3841 : Part 1
BS EN 10045-1
BS ISO 14269-2
BS EN 10045-2
Electromagnetic compatibility (EMC) -Limits -- Limitation of voltage fluctuations
and flicker in low-voltage power supply
systems for equipment with rated current
greater than 16 A
Tensile testing of metallic materials -Method of test at ambient temperature
Glossary of terms relating to sampling,
testing and analysis of solid mineral fuels
Tensile testing of metallic materials -Verification of the force measuring system
of the tensile testing machine
Tensile testing of metallic materials -Verification of extensometers used in
uniaxial testing
Tensile testing of metallic materials -Method of test at elevated temperatures
Glossary of coal preparation terms
Metallic materials. Brinell hardness test -Verification of Brinell hardness testing
machines
Metallic materials. Brinell hardness test -Calibration of standardized blocks to be
used for Brinell hardness testing machines
Specification for graphical symbols for
coal preparation plant flowsheets
BS ISO 14269-1 Tractors and selfpropelled machines for agriculture and
forestry - Operator enclosure environment Part 1 : Vocabulary
Electromagnetic compatibility. Generic
immunity standard -- Industrial
environment
Determination of smoke emission from
manufactured solid fuels for domestic use - General method for determination of
smoke emission rate
Charpy impact test on metallic materials -Test method (V- and U-notches)
BS ISO 14269-2 Tractors and selfpropelled machines for agriculture and
forestry - Operator enclosure environment Part 2 : Heating, ventilating and airconditioning test method and performance
Charpy impact test on metallic materials -Method for the verification of impact
BS 4262
BS 6043 : Part 2 : Section 2.1
BS 6127 : Part 4
BS ISO 14269-3
BS 4845 : Part 2
BS ISO 14269-4
BS ISO 14269-5
BS 6043 : Part 2 : Section 2.11
BS 6043 : Part 2 : Section 2.12
BS 6043 : Part 2 : Section 2.2
BS 6043 : Part 2 : Section 2.3
BS 6043 : Part 2 : Section 2.6
testing machines
Method of specifying the technical quality
of coke for use in blast furnaces
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -- Sampling
Method of determining microlithotype,
carbominerite and minerite composition
BS ISO 14269-3 Tractors and selfpropelled machines for agriculture and
forestry - Operator enclosure environment Part 3 : Determination of effect of solar
heating
Methods for sampling manufactured
domestic solid smokeless fuels in small
consignments of mass 50 kg to 5000 kg
either in bulk or in bags -- Sampling of
solid smokeless fuels other than coke
BS ISO 14269-4 Tractors and selfpropelled machines for agriculture and
forestry - Operator enclosure environment Part 4 : Air filter element test method
BS ISO 14269-5 Tractors and selfpropelled machines for agriculture and
forestry - Operator enclosure environment Part 5 : Pressurization system test method
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of volatile matter content
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of particle size distribution
of fine coke
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of ash content of green and
calcined cokes
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of trace elements by flame
atomic absorption spectrometry
Methods of sampling and test for
BS 6043 : Part 2 : Section 2.7
BS 6043 : Part 2 : Section 2.8
BS EN ISO 1158
BS 489
BS 2869 : Part 2
BS 4040
BS 5580
BS 7340
BS 7800
BS 1179
BS 1179 : Part 6
BS 3156 : Part 11 : Section 11.3 :
Subsection 11.3
BS 3804 : Part 1
BS 5355
BS 1123 : Part 1
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of the density in xylene of
calcined cokes
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of the apparent oil content
of calcined cokes (gravimetric method)
Methods of sampling and test for
carbonaceous materials used in aluminium
manufacture -- Electrode coke -Determination of oil content by solvent
extraction of calcined coke
BS EN ISO 1158 Plastics - Vinyl chloride
homopolymers and copolymers Determination of chlorine content
Specification for turbine oils
Fuel oils for non-marine use -Specification for fuel oil for agricultural
and industrial engines and burners (classes
A2, C1, C2, D, E, F, G and H)
Specification for leaded petrol (gasoline)
for motor vehicles
Diesel fuels - determination of ignition
quality - cetane method
Schedule for compressibility factors for
petroleum hydrocarbons in the density
range 638 kg/m3 to 1074 kg/m3
Specification for high octane (super)
unleaded petrol (gasoline) for motor
vehicles
Glossary of terms used in the gas industry
Glossary of terms used in the gas industry - Combustion and utilization including
installation at consumers' premises
Methods for non-manufactured gases -Determination of water in natural gas by
the Karl Fischer method -- Coulometric
method
Non-recording methods
Specification for filling ratios and
developed pressures for liquefiable and
permanent gases
Safety valves, gauges and fusible plugs for
compressed air or inert gas installations --
BS 4445
BS 7072
BS MA 100
BS EN ISO 3830
BS EN 228
BS EN 25163
BS EN 25164
BS EN 26246
BS EN ISO 4256
BS EN ISO 4257
BS EN ISO 6251
BS EN 589
BS EN 50136-1-1
BS EN 27941
BS 6631
BS 6169 : Part 1
Code of practice for installation
schedule of tests for gasification and
reforming plants using hydrocarbon
feedstocks
Code of practice for inspection and repair
of offshore containers
Specification for petroleum fuels for
marine oil engines and boilers
Petroleum products. Determination of lead
content of gasoline. Iodine monochloride
method
Specification for unleaded petrol (gasoline)
for motor vehicles
Methods of test for petroleum and its
products. Motor and aviation-type fuels.
Determination of knock characteristics.
Motor method
Methods of test for petroleum and its
products. Motor fuels. Determination of
knock characteristics. Research method
Methods of test for petroleum and its
products. Petroleum products. Motor
gasoline and aviation fuels. Determination
of existent gum. Jet evaporation method
Methods of test for petroleum and its
products. Liquefied petroleum gases.
Determination of vapour pressure. LPG
method
Liquefied petroleum gases. Method of
sampling
Liquefied petroleum gases. Corrosiveness
to copper. Copper strip test
Specification for automotive liquefied
petroleum gas
BS EN 50136-1-1 Alarm systems - Alarm
transmission systems and equipment - Part
1-1 : General requirements for alarm
transmission systems
Methods of test for petroleum and its
products. Commercial propane and butane.
Analysis by gas chromatography
Specification for rubber hoses and hose
assemblies for rotary drilling and vibration
applications
Methods for volumetric measurement of
liquid hydrocarbons -- Displacement meter
BS 6169 : Part 2
BS 6441
BS 6866 : Part 3
BS 7550 : Part 1
BS 7550 : Part 2
BS 7577
BS EN ISO 4608
BS ISO 6264
BS 7723 : Part 1
BS 7723 : Part 2
BS 7723 : Part 3
BS 7723 : Part 4
BS 7812
BS 7813
systems (other than dispensing pumps)
Methods for volumetric measurement of
liquid hydrocarbons -- Turbine meter
systems
Schedule for petroleum measurement tables
Proving systems for meters used in
dynamic measurement of liquid
hydrocarbons -- Methods for pulse
interpolation
Calibration of spherical tanks for
refrigerated light-hydrocarbon fluids in
ships -- Method of stereo-photogrammetry
Calibration of spherical tanks for
refrigerated light-hydrocarbon fluids in
ships -- Triangulation method
Specification for calculation procedures for
static measurement of refrigerated light
hydrocarbon fluids
BS EN ISO 4608 Plastics - Homopolymer
and copolymer resins of vinyl chloride for
general use - Determination of plasticizer
absorption at room temperature
BS ISO 6264 Hydraulic fluid power Pressure-relief valves - Mounting surfaces
Methods for calibration of vertical
cylindrical tanks for petroleum and liquid
petroleum products -- Strapping method
Methods for calibration of vertical
cylindrical tanks for petroleum and liquid
petroleum products -- Optical-referenceline method
Methods for calibration of vertical
cylindrical tanks for petroleum and liquid
petroleum products -- Optical-triangulation
method
Methods for calibration of vertical
cylindrical tanks for petroleum and liquid
petroleum products -- Internal electrooptical distance-ranging method
Guide for selection, specification,
installation, operation and maintenance of
automatic liquid level and temperature
measuring instruments on petroleum
storage tanks
Guide for statistical control of dynamic
liquid hydrocarbon volumetric metering
BS 3447
BS 2598 : Part 2
BS 2649 : Part 1
BS 2649 : Part 3
BS 3473 : Part 1
BS 3473 : Part 2
BS 3473 : Part 3
BS 3473 : Part 5
BS 1414
BS 1434
BS 7030
BS 1452
BS 1640 : Part 1
BS 1640 : Part 2
BS 1640 : Part 3
systems
Glossary of terms used in the glass industry
Glass plant, pipeline and fittings -Specification for testing, handling and use
Methods for analysis of glass -- Glasses of
the soda-lime-magnesia-silica type
Methods for analysis of glass -- Glasses of
the potassium oxide-lead oxide-silica type
Chemical resistance of glass used in the
production of laboratory glassware Method
for determination of resistance of glass to
attack by a boiling aqueous solution of
mixed alkali
Chemical resistance of glass used in the
production of laboratory glassware Method
for determination of hydrolytic resistance
of glass grains at 98øC
Chemical resistance of glass used in the
production of laboratory glassware Method
for determination of hydrolytic resistance
of glass grains at 121øC
Chemical resistance of glass used in the
production of laboratory glassware Method
for determination of resistance of glass to
attack by 6 mol/L hydrochloric acid at
100øC
Specification for steel wedge gate valves
(flanged and butt-welding ends) for the
petroleum, petrochemical and allied
industries
Specification for copper for electrical
purposes : copper sections in bars, blanks
and segments for commutators
Method for determination of the coefficient
of mean linear thermal expansion of glass
Specification for flake graphite cast iron
Specification for steel butt-welding pipe
fittings for the petroleum industry -Wrought carbon and ferritic alloy steel
fittings
Specification for steel butt-welding pipe
fittings for the petroleum industry -Wrought and cast austenitic chromiumnickel steel fittings
Specification for steel butt-welding pipe
fittings for the petroleum industry --
BS 1640 : Part 4
BS 1873
BS 2464
BS 2464 : Part 2
BS 2464 : Part 3
BS 2464 : Part 4
BS 3016
BS 3212
BS 3293
BS 3492
BS 5173:Part 102: Section 102.3
BS 5173:Part 102: Section 102.10
BS 5351
DD ENV 13070
Wrought carbon and ferritic alloy steel
fittings. Metric units
Specification for steel butt-welding pipe
fittings for the petroleum industry -Wrought and cast austenitic chromiumnickel steel fittings. Metric units
Specificatiod for steel globe and globe stop
and check valves (ranged and butt-welding
ends) for the petroleum, petrochemical and
allied industries
Specification for hose couplings for petrel,
oil and lubricants (3/4 in. to 4 in. nominal
sizes)
Hose couplings for petrol, oil and
lubricants -- High pressure, couplings
Hose couplings for petrol, oil and
lubricants -- Quick-acting couplings
Hose couplings for petrol, oil and
lubricants -- Specification for 100 mm
quick-acting couplings: European type
Specification for pressure regulators and
automatic changeover devices for liquefied
petroleum gases
Specification for flexible rubber tubing,
rubber hose and rubber hose assemblies for
use in LPG vapour phase and LPG/air
installations
Specification for carbon steel pipe flanges
(over 24 inches nominal size) for the
petroleum industry
Specification for road and rail tanker hoses
and hose assemblies for petroleum
products, including aviation fuels
Methods of test for rubber and plastics
hoses and hose assemblies -- Hydraulic
pressure tests -- Determination of
volumetric expansion of fuel-dispensing
pump hoses
Methods of test for rubber and plastics
hoses and hose assemblies -- Hydraulic
pressure tests -- Hydrostatic tests for oil
suction and discharge hose
Specification for steel ball valves for the
petroleum, petrochemical and allied
industries
DD ENV 13070 Fruit and vegetable juices
BS 5352
BS 7336
BS 7034 : Part 1
BS 7034 : Part 2
BS 7034 : Part 3
BS 7034 : Part 4
BS 7034 : Part 5
BS 2096
BS 7034 : Part 7
BS 2654
BS 7034 : Part 8
BS 2797
BS 7604 : Part 2
- Determination of the stable carbon
isotope ratio
(&sup1;&sup3;C/&sup1;&sup2;C) in the
pulp of fruit juices - Method using isotope
ratio mass spectrometry
Specification for steel wedge gate, globe
and check valves 50 mm and smaller for
the petroleum, petrochemical and allied
industries
Specification for polyethylene fusion
fittings with integral heating element(s) for
use with polyethylene pipes for the
conveyance of gaseous fuels
Viscosity and viscometric fixed points of
glass -- Recommendations for use in the
determination of viscosity and viscometric
fixed points
Viscosity and viscometric fixed points of
glass -- Method for the determination of
viscosity by rotation viscometers
Viscosity and viscometric fixed points of
glass -- Method for the determination of
viscosity by fibre elongation viscometer
Viscosity and viscometric fixed points of
glass -- Method for the determination of
viscosity by beam bending
Viscosity and viscometric fixed points of
glass -- Method for the determination of
working point by sinking bar viscometer
Method of testing oil-fired rotary dryers for
use in asphalt and coated macadam plant
Viscosity and viscometric fixed points of
glass -- Method for the determination of
annealing point and strain point by beam
bending
Specification for manufacture of vertical
steel welded non-refrigerated storage tanks
with butt-welded shells for the petroleum
industry
Viscosity and viscometric fixed points of
glass -- Method for the determination of
(dilatometric) transformation temperature
Specification for leathers for gas meter
diaphragms
Method for determination of stress-optical
coefficient of glass -- Bending test
BS 3395
BS 7709 : Part 1
BS 7709 : Part 2
BS 7709 : Part 3
BS 7709 : Part 4
BS 7117: Part 1
BS 7117: Part 2
BS 7117: Part 3
BS 7281
BS 7709 : Part 5
BS 7709 : Part 6
BS 3108
BS 3828
BS 7603
BS ISO 11455
Specification for electrically bonded rubber
hoses and hose assemblies for dispensing
petroleum based fuels
Analysis of extract solutions of glass -Method for determination of silicon
dioxide by molecular absorption
spectrometry
Method for determination of sodium oxide
and potassium oxide by flame
spectrometric methods
Analysis of extract solutions of glass -Method for determination of calcium oxide
and magnesium oxide by flame atomic
absorption spectrometry
Analysis of extract solutions of glass -Method for determination of aluminium
oxide by molecular absorption
spectrometry
Metering pumps and dispensers to be
installed at filling stations and used to
dispense liquid fuel -- Specification for
construction
Metering pumps and dispensers to be
installed at filling stations and used to
dispense liquid fuel -- Guide to installation
Metering pumps and dispensers to be
installed at filling stations and used to
dispense liquid fuel -- Guide to
maintenance after installation
Specification for polyethylene pipes for the
supply of gaseous fuels
Analysis of extract solutions of glass -Method for determination of iron (III)
oxide by molecular absorption
spectrometry and flame atomic absorption
spectrometry
Analysis of extract solutions of glass -Method for determination of boron (III)
oxide by molecular absorption
spectrometry
Specification for limestone for making
colourless glasses
Specification for crystal glass
Method for determination of stresses in
glass-to-glass sealings
Raw optical glass. Determination of
BS 2782 : Part 9 : Method 940A
BS 952 : Part 2
BS 952 : Part 1
BS 5051:Part 1
BS 5357
BS EN 50083-2
BS 5544
BS 6100 : Part 1 : Section 1.4 : Subsection
1.4.1
BS 5738
BS 6262
BS 6262 : Part 4
BS 6057 : Part 3 : Section 3.1
BS 6993 : Part 1
BS 6993 : Part 2
BS EN 60598-2-5
BS 6057 : Part 3 : Section 3.4
PD 6512 : Part 3
birefringence
Methods of testing plastics -- Sampling and
test specimen preparation -- Preparation of
test specimens of amorphous
thermoplastics in the form of bars with a
specified reversion
Glass for glazing -- Terminology for work
on glass
Glass for glazing -- Classification
Bullet-resistant glazing -- Specification for
glazing for interior use
Code of practice for installation of security
glazing
Cabled distribution systems for television
and sound signals -- Electromagnetic
compatibility for equipment
Specification for anti-bandit glazing
(glazing resistant to manual attack)
Glossary of building and civil engineering
terms -- General and miscellaneous -Materials -- Glazing
Methods of test for evaluation of
vulcanization characteristics for raw natural
rubbers
Code of practice for glazing for buildings
Glazing for buildings -- Code of practice
for safety. Human impact
Rubber latices -- Methods of test -Determination of mechanical stability of
natural rubber latex concentrate
Thermal and radiometric properties of
glazing -- Method for calculation of the
steady state U-value (thermal
transmittance)
Thermal and radiometric properties of
glazing -- Method for direct measurement
of U-value (thermal transmittance)
BS EN 60598-2-5 Luminaires - Part 2-5 :
Particular requirements - Floodlights
Rubber latices -- Methods of test -Determination of dry rubber content of
natural rubber latices
Use of elements of structural fire protection
with particular reference to the
recommendations given in BS 5588 'Fire
precautions in the design and construction
BS 7164: Part 6: Section 6.1
BS EN 572-1
BS EN 572-2
BS EN 572-3
BS EN 572-4
BS EN 572-5
BS EN 572-6
BS EN 572-7
BS 2598 : Part 3
BS 3193
BS 6748
BS ISO 8106
BS ISO 8113