International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft
International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 August to 31 August 2012
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
JTC 2
Joint Project Committee - Energy efficiency and renewable energy sources - Common
terminology
ISO/IEC CD 13273-1
Energy efficiency and renewable energy sources — Common international terminology — Part 1: Energy Efficiency
ISO/IEC CD 13273-2
Energy efficiency and renewable energy sources — Common international terminology — Part 2: Renewable
Energy Sources
TC 8
Ships and marine technology
ISO/CD 17602
Ships and marine technology — Metal valves for use in flanged pipe — Face to face and centre to face dimensions
TC 17
Steel
ISO/CD 630-5
Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion
resistance
TC 20
Aircraft and space vehicles
ISO/CD 11077
Aerospace — Self-propelled de-icing/anti-icing vehicles — Functional requirements
ISO/CD 14085-1
Aerospace — Hydraulic systems — Filter elements in filters — Test methods — Part 1: Qualification procedures
ISO/CD 14085-2
Aerospace — Hydraulic systems — Filter elements in filters — Test methods — Part 2: Conditioning
ISO/CD 14085-3
Aerospace — Hydraulic systems — Filter elements in filters — Test methods — Part 3: Filtration efficiency
ISO/CD 14085-4
Aerospace — Hydraulic systems — Filter elements in filters — Test methods — Part 4: Retention capacity and
burst/collapse pressure
ISO/CD 14085-5
Aerospace — Hydraulic systems — Filter elements in filters — Test methods — Part 5: Resistance to flow fatigue
ISO/CD 14085-6
Aerospace — Hydraulic systems — Filter elements in filters — Test methods — Part 6: Cleanliness level
ISO/CD 16691
Space systems — Thermal Control Coatings for satellites and spacecraft — General requirements
ISO/CD 16781
Space systems — Simulation requirements for control system
ISO/CD 17255
Space systems — Programme management — Statement of work
TC 22
Road vehicles
ISO/CD 16845-2
Road vehicles — Controller area network (CAN) — Conformance test plan — Part 2: High-speed medium access
unit with selective wake-up functionality — Conformance test plan
ISO/CD 17215-3
Road vehicles — Video communication interface for cameras (VCIC) — Part 3: Camera message dictionary
ISO/CD 16332
Road vehicles — Water separation efficiency of fuel filter systems for diesel engine application
ISO/IEC CD 62752
In cable control and protectivedevice for mode 2 charging of electric road vehicles — (IC-RCD)
TC 23
Tractors and machinery for agriculture and forestry
ISO/CD 3767-1
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator
controls and other displays — Part 1: Common symbols
ISO/CD 3767-2
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator
controls and other displays — Part 2: Symbols for agricultural tractors and machinery
ISO/CD 3767-3
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator
controls and other displays — Part 3: Symbols for powered lawn and garden equipment
ISO/CD 3767-4
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator
controls and other displays — Part 4: Symbols for forestry machinery
TC 24
Particle characterization including sieving
ISO/CD 13099-3
Methods for zeta potential determination — Part 3: Acoustic methods
ISO/CD 27891
Aerosol particle number concentration — Calibration of condensation particle number counters
TC 27
Solid mineral fuels
ISO/CD 1213-2
Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis
TC 28
Petroleum products and lubricants
ISO/CD 17315
Ethanol — Determination of total acidity by potenciometric titration
TC 31
Tyres, rims and valves
ISO/CD 4250-1
Earth-mover tyres and rims — Part 1: Tyre designation and dimensions
ISO/CD 4250-2
Earth-mover tyres and rims — Part 2: Loads and inflation pressures
TC 42
Photography
ISO/CD 18943
Imaging materials — Magnetic hard drives used for image storage — Care and handling
TC 43
Acoustics
ISO/CD 362-3
Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 3: Compatibility
between indoor and outdoor testing of road vehicles
TC 44
Welding and allied processes
ISO/CD 9455-5
Soft soldering fluxes — Test methods — Part 5: Copper mirror test
TC 51
Pallets for unit load method of materials handling
ISO/DTS 8611-4
Pallets for materials handling — Flat pallets — Part 4: Procedure for predicting creep responses in stiffness tests for
plastic pallets using regression analyses
TC 59
Buildings and civil engineering works
ISO/CD 16745-1
Environmental performance of buildings — Carbon Metric of a building — Part 1: Use stage
TC 72
Textile machinery and accessories
ISO/CD 21485
Textile machinery — Draw frame for cotton spinning — Vocabulary and principles of construction
TC 92
Fire safety
ISO/CD 9705-1
Fire tests — Full-scale room test for surface products — Part 1:
TC 98
Bases for design of structures
ISO/CD 2394
General principles on reliability for structures
TC 147
Water quality
ISO/CD 13165-3
Water quality — Radium 226 — Part 3: Test method using coprecipitation and gamma spectrometry
TC 156
Corrosion of metals and alloys
ISO/CD 17248
Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by
embedding in salt, ash, or other solids
TC 158
Analysis of gases
ISO/CD 6142
Gas analysis — Preparation of calibration gas mixtures — Gravimetric method
TC 189
Ceramic tile
ISO/CD 13007-1
Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives
TC 204
Intelligent transport systems
ISO/CD 15638-6
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 6: Regulated applications
ISO/DTS 15638-6
Intelligent transport systems --- Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 6: Regulated applications
ISO/CD 15638-8
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 8: Vehicle access monitoring (VAM)
ISO/DTS 15638-8
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 8: Vehicle access monitoring (VAM)
ISO/CD 15638-9
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 9: Remote electronic tachograph monitoring (RTM)
ISO/DTS 15638-9
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 9: Remote electronic tachograph monitoring (RTM)
ISO/CD 15638-10
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 10: Emergency messaging system/eCall (EMS)
ISO/DTS 15638-10
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 10: Emergency messaging system/eCall (EMS)
ISO/CD 15638-11
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 11: Driver work records (work and rest hours compliance) (DWR)
ISO/DTS 15638-11
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 11: Driver work records (work and rest hours compliance) (DWR)
ISO/CD 15638-12
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 12: Vehicle mass monitoring (VMM)
ISO/DTS 15638-12
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 12: Vehicle mass monitoring (VMM)
ISO/CD 15638-13
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 13: Mass Penalties and Levies (VMC)
ISO/DTS 15638-13
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 13: Mass Penalties and Levies (VMC)
ISO/CD 15638-14
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 14: Vehicle access control (VAC)
ISO/DTS 15638-14
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 14: Vehicle access control (VAC)
ISO/CD 15638-15
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 15: Vehicle location monitoring (VLM)
ISO/DTS 15638-15
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 15: Vehicle location monitoring (VLM)
ISO/CD 15638-16
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 16: Vehicle speed monitoring (VSM)
ISO/DTS 15638-16
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 16: Vehicle speed monitoring (VSM)
ISO/CD 15638-17
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 17: Consignment and location monitoring (CLM)
ISO/DTS 15638-17
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 17: Consignment and location monitoring (CLM)
ISO/CD 15638-18
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 18: ADR (Dangerous Goods) transport monitoring (ADR)
ISO/DTS 15638-18
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 18: ADR (Dangerous Goods) transport monitoring (ADR)
ISO/CD 15638-19
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 19: Vehicle parking facilities (VPF)
ISO/DTS 15638-19
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial
freight Vehicles (TARV) — Part 19: Vehicle parking facilities (VPF)
TC 211
Geographic information/Geomatics
ISO/CD 19109
Geographic information — Rules for application schema
ISO/CD 19119
Geographic information — Services
ISO/CD 19150-2
Geographic information — Ontology — Part 2: Rules for developing ontologies in the Web Ontology Language
(OWL)
TC 244
Industrial furnaces and associated processing equipment
ISO/CD 13577-4
Industrial furnace and associated processing equipement — Safety — Part 4: Protective systems
TC 252
Project committee: Natural gas fuelling stations for vehicles
ISO/CD 16923
Compressed natural gas (CNG) vehicle filling stations
ISO/CD 16924
Liquefied natural gas (LNG) vehicle filling stations
CASCO
Committee on conformity assessment
ISO/IEC DTS 17021-3
Conformity assessment — Requirements for bodies providing audit and certification of management systems —
Part 3: Competence requirements for auditing and certification of quality management systems
JTC 1
Information technology
ISO/IEC
10646:2012/PDAM 2
Information technology — Universal Coded Character Set (UCS) — Amendment 2: Caucasian Albanian, Psalter
Pahlavi, Old Hungarian, Mahajani, Grantha, Modi, Pahawh Hmong, Mende, and other characters
ISO/IEC CD 20000-4
Information technology — Service management — Part 4: Process reference model
ISO/IEC CD 24748-4
Systems engineering — Application and management of the systems engineering process — Part 4:
ISO/IEC CD 7811-1
Identification cards — Recording technique — Part 1: Embossing
ISO/IEC CD 7811-2
Identification cards — Recording technique — Part 2: Magnetic stripe
ISO/IEC CD 7811-6
Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity
ISO/IEC CD 7811-7
Identification cards — Recording technique — Part 7: Magnetic stripe — High coercivity, high density
ISO/IEC CD 7811-8
Identification cards — Recording technique — Part 8: Magnetic stripe — Coercivity of 51,7 kA/m (650 Oe)
ISO/IEC CD 8484
Information technology — Magnetic stripes on savingsbooks
ISO/IEC CD 10373-2
Identification cards — Test methods — Part 2: Cards with magnetic stripes
ISO/IEC 1449626:2010/PDAM 3
Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Amendment 3:
Conformance for Low Delay AAC v2 profile
ISO/IEC 230091:2012/PDAM 1
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation
description and segment formats — Amendment 1: Support for Event Messages and extended Audio Channel
Configuration
ISO/IEC CD 29197
Evaluation Methodology for Environmental Influence in Biometric Systems
DIS circulated
Period from 01 August to 31 August 2012
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
REMCO
ISO/DGuide 80
Committee on reference materials
*
TC 8
ISO/DIS 16707
*
TC 23
Ships and marine technology — Marine evacuation systems — Determination of capacity
2013-01-05
Steel
*
TC 22
ISO
10605:2008/DAmd
1
2012-12-29
Ships and marine technology
TC 17
ISO/DIS 13933
Guidance for in-house production of reference materials for quality control (QCMs)
Steel and iron — Determination of calcium and magnesium — Inductively coupled plasma atomic
emisson spectrometric method
2013-01-29
Road vehicles
*
Road vehicles — Test methods for electrical disturbances from electrostatic discharge —
Amendment 1
Tractors and machinery for agriculture and forestry
2012-11-30
ISO/DIS 5721-2
*
Agricultural tractors-- Requirements, test procedures and acceptance criteria for the operator's field
of vision — Part 2: Field of vision to the side and to the rear
(Revision of ISO 5721:1989)
TC 31
ISO/DIS 20562
Tyres, rims and valves
*
Tyre valves — ISO core chambers No. 1, No. 2, No. 3 and No. 4
2013-01-14
(Revision of ISO 20562:2004)
TC 34
Food products
ISO 91671:1992/DAmd 1
*
Rapeseed — Determination of glucosinolates content — Part 1: Method using high-performance
liquid chromatography — Amendment 1
2013-01-10
ISO/DIS 11133
*
Microbiology of food, animal feed and water — Preparation, production, storage and performance
testing of culture media
2013-01-03
(Revision of ISO/TS 11133-2:2003, ISO/TS 11133-1:2009, ISO/TS 11133-2:2003/Amd 1:2011)
TC 39
ISO/DIS 11090-1
Machine tools
*
Test conditions for die sinking electro-discharge machines (EDM) — Terminology and testing of
accuracy — Part 1: Single-column machines (cross-slide table type and fixed-table type)
2013-01-09
(Revision of ISO 11090-1:1998)
ISO/DIS 11090-2
*
Test conditions for die sinking electro-discharge machines (EDM) — Terminology and testing of
accuracy — Part 2: Double-column machines (slide-head type and cross-slide table type)
2013-01-09
(Revision of ISO 11090-2:1998)
TC 44
ISO/DIS 2553.2
Welding and allied processes
*
Welding and allied processes — Symbolic representation on drawings — Welded, brazed and
soldered joints
2012-10-31
(Revision of ISO 2553:1992)
ISO/DIS 14555
*
Welding — Arc stud welding of metallic materials
2013-01-03
(Revision of ISO 14555:2006)
TC 45
Rubber and rubber products
ISO/DIS 6808
*
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids —
Specification
ISO/DIS 16301
*
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks and
for hydraulic power units used in hydraulic tools — Specification
ISO/DIS 5999
*
Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding
carpet underlay — Specification
2013-01-24
2013-01-03
(Revision of ISO 5999:2007)
TC 46
ISO/DIS 2789
Information and documentation
*
Information and documentation — International library statistics
2012-11-22
(Revision of ISO 2789:2006)
TC 61
ISO/DIS 16525-9
Plastics
*
TC 67
ISO/DIS 21809-2
Adhesives — Test methods for isotropically electrically conducting adhesives — Part 9:
Determination of high-speed signal-transmission characteristics
2013-01-14
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
*
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used
in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
2013-01-31
(Revision of ISO 21809-2:2007, ISO 21809-2:2007/Cor 1:2008)
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/DIS 12799
*
Nuclear energy — Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered
pellets - Inert gas extraction and conductivity detection method
2013-01-07
ISO/DIS 15651
*
Nuclear energy — Determination of total hydrogen content in PuO2 and UO2 powders and UO2,
(U,Gd)O2 and (U,Pu)O2 sintered pellets — Inert gas extraction and conductivity detection method
2013-01-07
ISO/DIS 16966
*
Nuclear energy — Nuclear fuel technology — Theoretical activation calculation method to evaluate
the radioactivity of activated waste generated at nuclear reactors
2013-01-07
TC 94
ISO/DIS 20346
Personal safety -- Protective clothing and equipment
*
Personal protective equipment — Protective footwear
2013-01-03
(Revision of ISO 20346:2004, ISO 20346:2004/Cor 1:2005, ISO 20346:2004/Amd 1:2007, ISO
20346:2004/Cor 2:2006)
TC 98
ISO/DIS 13033
Bases for design of structures
*
TC 105
ISO/DIS 16839
2013-01-28
Steel wire ropes
*
TC 107
ISO/DIS 14920
Seismic actions on nonstructural components for building applications
Steel wire ropes — Determination of the compliance characteristics of steel wire ropes subjected to
lateral load
2013-01-28
Metallic and other inorganic coatings
*
Thermal spraying — Spraying and fusing of self-fluxing alloys
2013-01-17
(Revision of ISO 14920:1999)
TC 131
ISO/DIS 6358-3.2
Fluid power systems
*
Pneumatic fluid power — Determination of flow-rate characteristics of components — Part 3:
Method for calculating steady-state flow-rate characteristics of assemblies
2012-10-22
(Revision of ISO 6358:1989, ISO/CD 6358-5)
TC 146
Air quality
ISO/DIS 17091
*
Workplace air — Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and
calcium dihydroxide — Method by measurement of corresponding cations by suppressed ion
chromatography
2013-01-27
ISO/DIS 16000-21
*
Indoor air — Part 21: Detection and enumeration of moulds — Sampling from materials
2013-01-21
ISO/DIS 16000-29
*
Indoor air — Part 29: Test methods for VOC detectors
2013-01-28
ISO/DIS 16000-30
*
Indoor air — Part 30: Sensory testing of indoor air
2013-01-21
ISO/DIS 16000-31
*
Indoor air — Part 31: Measurement of flame retardants and plasticizers based on
organophosphorus compounds — Phosphoric acid ester
2013-01-21
ISO/DIS 16000-32
*
Indoor air — Part 32: Investigation of buildings for pollutants and other injurious factors —
Inspections
2013-01-03
TC 172
ISO/DIS 8980-3.2
Optics and photonics
*
Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and
test methods
2012-11-06
(Revision of ISO 8980-3:2003)
TC 198
ISO/DIS 11140-1
Sterilization of health care products
*
Sterilization of health care products — Chemical indicators — Part 1: General requirements
(Revision of ISO 11140-1:2005)
2013-01-24
TC 213
ISO/DIS 2692
Dimensional and geometrical product specifications and verification
*
Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material
requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
2013-01-03
(Revision of ISO 2692:2006)
ISO
3040:2009/DAmd 1
*
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones —
Amendment 1
2013-01-10
ISO/DIS 10360-10
*
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate
measuring machines (CMS) — Part 10: Laser trackers for measuring point-to-point distances
2013-01-24
ISO 144051:2010/DAmd 1
*
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes —
Amendment 1
2013-01-10
TC 215
ISO/DIS 18104
Health informatics
*
Health informatics — Categorical structures for representation of nursing diagnoses and nursing
actions in terminological systems
2013-01-24
(Revision of ISO 18104:2003)
ISO/DIS 20301
*
Health informatics — Health cards — General characteristics
2012-11-17
(Revision of ISO 20301:2006)
ISO/HL7 DIS
21731
*
Health informatics — HL7 version 3 — Reference information model — Release 1
2013-01-07
(Revision of ISO/HL7 21731:2006)
TC 223
Societal security
ISO/DIS 22398.2
Societal security — Guidelines for exercises and testing
TC 228
Tourism and related services
ISO/DIS 14785
*
IULTCS
ISO/DIS 17070
Tourist information offices — Tourist information and reception services — Requirements
2012-10-25
2013-01-21
International Union of Leather Technologists and Chemists Societies
*
Leather — Chemical tests — Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-,
monochlorophenol-isomers and pentchlorophenol content
2013-01-03
(Revision of ISO 17070:2006)
ISO/DIS 18218-1
*
Leather — Determination of ethoxylated alkylphenols — Part 1: Direct method
2013-01-31
ISO/DIS 18218-2
*
Leather — Determination of ethoxylated alkylphenols — Part 2: Indirect method
2013-01-31
JTC 1
Information technology
ISO/IEC DIS
25063.2
*
Systems and software engineering — Systems and software product Quality Requirements and
Evaluation (SQuaRE) — Common Industry Format (CIF) for usability: Context of use description
2012-10-18
ISO/IEC DIS
25064.2
*
Systems and software engineering — Software product Quality Requirements and Evaluation
(SQuaRE) — Common Industry Format (CIF) for usability: User needs report
2012-10-18
ISO/IEC DIS 8652
*
Information technology — Programming languages — Ada
2012-11-16
(Revision of ISO/IEC 8652:1995, ISO/IEC 8652:1995/Cor 1:2001, ISO/IEC 8652:1995/Amd 1:2007)
ISO/IEC DIS
23006-1.2
Information technology — Multimedia service platform technologies — Part 1: Architecture
2012-10-04
(Revision of ISO/IEC CD 23006, ISO/IEC 23006-1:2011)
ISO/IEC DIS
23006-5.2
Information technology — Multimedia service platform technologies — Part 5: Service aggregation
2012-10-10
FDIS circulated
Period from 01 August to 31 August 2012
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 2
ISO/FDIS 7040
Fasteners
*
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 — Property classes 5, 8 and
10
2012-10-03
(Revision of ISO 7040:1997)
ISO/FDIS 7042
*
Prevailing torque type all-metal hexagon nuts, style 2 — Property classes 5, 8, 10 and 12
2012-10-03
(Revision of ISO 7042:1997)
ISO/FDIS 7719
*
Prevailing torque type all-metal hexagon nuts, style 1 — Property classes 5, 8 and 10
2012-10-03
(Revision of ISO 7719:1997)
ISO/FDIS 10511
*
Prevailing torque type hexagon thin nuts (with non-metallic insert)
2012-10-03
(Revision of ISO 10511:1997)
ISO/FDIS 10512
*
Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread
— Property classes 6, 8 and 10
2012-10-03
(Revision of ISO 10512:1997)
TC 6
ISO/FDIS 2469
Paper, board and pulps
*
Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)
2012-10-21
(Revision of ISO 2469:2007)
TC 8
ISO/FDIS 16548
Ships and marine technology
*
TC 10
ISO/FDIS 10628-2
Ships and marine technology — Ship design — General guidance on emergency towing
procedures
2012-10-07
Technical product documentation
*
Diagrams for the chemical and petrochemical industry — Part 2: Graphical symbols
2012-10-10
(Revision of ISO 10628:1997)
TC 17
ISO/FDIS 643
Steel
*
Steels — Micrographic determination of the apparent grain size
2012-11-10
(Revision of ISO 643:2003)
TC 20
ISO/FDIS 14200
Aircraft and space vehicles
*
TC 22
ISO/FDIS 16750-2
Space environment (natural and artificial) - Guide to process-based implementation of meteoroid
and debris environmental models (orbital altitudes below GEO + 2 000 km)
2012-10-30
Road vehicles
*
Road vehicles — Environmental conditions and testing for electrical and electronic equipment —
Part 2: Electrical loads
2012-10-16
(Revision of ISO 16750-2:2010)
ISO/FDIS 7641
*
Road vehicles — Trailers up to 3,5 t — Calculation of the mechanical strength of steel drawbars
2012-10-18
(Revision of ISO 7641-1:1983)
ISO/FDIS 22241-5
*
TC 28
ISO/FDIS 12922
Diesel engines — NOx reduction agent AUS 32 — Part 5: Refilling interface for passenger cars
2012-10-18
Petroleum products and lubricants
*
Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) —
Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
2012-10-31
(Revision of ISO 12922:1999, ISO 12922:1999/Cor 1:2001)
TC 34
ISO/FDIS 11132
Food products
*
TC 35
ISO/FDIS 15091
*
Paints and varnishes — Determination of electrical conductivity and resistance
2012-10-17
Terminology and other language and content resources
*
TC 41
ISO/FDIS 9980
2012-10-09
Paints and varnishes
TC 37
ISO/FDIS 24611
Sensory analysis — Methodology — Guidelines for monitoring the performance of a quantitative
sensory panel
Language resource management — Morpho-syntactic annotation framework (MAF)
2012-10-16
Pulleys and belts (including veebelts)
*
Belt drives — Grooved pulleys for V-belts (system based on effective width) — Geometrical
inspection of grooves
2012-10-08
(Revision of ISO 9980:1990)
ISO/FDIS 284
*
Conveyor belts — Electrical conductivity — Specification and test method
2012-10-10
(Revision of ISO 284:2003)
ISO/FDIS 4195
*
Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and
test methods
2012-10-16
(Revision of ISO 4195:2007, ISO 4195:2007/Cor 1:2008)
ISO/FDIS 15147
*
Light conveyor belts — Tolerances on widths and lengths of cut light conveyor belts
2012-10-10
(Revision of ISO 15147:1999)
ISO/FDIS 16851
*
Textile conveyor belts — Determination of the net length of an endless (spliced) conveyor belt
2012-10-10
(Revision of ISO 16851:2004)
ISO/FDIS 18573
*
Conveyor belts — Test atmospheres and conditioning periods
2012-10-16
(Revision of ISO 18573:2003)
TC 42
ISO/FDIS 17321-1
Photography
*
Graphic technology and photography — Colour characterisation of digital still cameras (DSCs) —
Part 1: Stimuli, metrology and test procedures
2012-10-18
(Revision of ISO 17321-1:2006)
TC 45
Rubber and rubber products
ISO/FDIS 13507
*
Rubber compounds, raw rubbers and compounding materials — Short terms for properties reported
in certificates of analysis
2012-10-30
ISO/FDIS 18752
*
Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for
hydraulic applications — Specification
2012-10-21
(Revision of ISO 18752:2006, ISO 18752:2006/Amd 1:2010)
ISO/FDIS 3384-2
*
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 2:
Testing with temperature cycling
2012-10-24
TC 61
ISO/FDIS 5659-2
Plastics
*
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
2012-10-31
(Revision of ISO 5659-1:1996, ISO 5659-2:2006)
ISO/FDIS 1874-2
*
Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test
specimens and determination of properties
2012-10-31
(Revision of ISO 1874-2:2006, ISO 1874-2:2006/Amd 1:2010)
ISO/FDIS 2561
*
Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant
polystyrene (PS-I) by gas chromatography
2012-10-28
(Revision of ISO 2561:2006)
ISO/FDIS 7792-1
*
Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation
system and basis for specifications
2012-10-24
(Revision of ISO 7792-1:1997)
ISO/FDIS 7792-2
*
Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of
test specimens and determination of properties
2012-10-24
(Revision of ISO 7792-2:1997)
ISO/FDIS 14910-1
*
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and
extrusion — Part 1: Designation system and basis for specification
2012-10-31
(Revision of ISO 14910-1:1997)
ISO/FDIS 14910-2
*
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and
extrusion — Part 2: Preparation of test specimens and determination of properties
2012-10-31
(Revision of ISO 14910-2:1997)
ISO/FDIS 11963
*
Plastics — Polycarbonate sheets — Types, dimensions and characteristics
2012-10-31
(Revision of ISO 11963:1995)
TC 67
ISO/FDIS 15589-2
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
*
Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems —
Part 2: Offshore pipelines
2012-10-31
(Revision of ISO 15589-2:2004)
TC 85
ISO/FDIS 11665-8
Nuclear energy, nuclear technologies, and radiological protection
*
TC 86
ISO/FDIS 5149-1
Measurement of radioactivity in the environment — Air: radon-222 — Part 8: Methodologies for
initial and additional investigations in buildings
2012-10-14
Refrigeration and air-conditioning
*
Refrigerating systems and heat pumps — Safety and environmental requirements — Part 1:
Definitions, classification and selection criteria
2012-10-04
(Revision of ISO 5149:1993)
ISO/FDIS 5149-2
*
Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2:
Design, construction, testing, marking and documentation
2012-10-04
(Revision of ISO 5149:1993)
ISO/FDIS 5149-3
*
Refrigerating systems and heat pumps — Safety and environmental requirements — Part 3:
Installation site
2012-10-04
(Revision of ISO 5149:1993)
ISO/FDIS 5149-4
*
Refrigerating systems and heat pumps — Safety and environmental requirements — Part 4:
Operation, maintenance, repair and recovery
(Revision of ISO 5149:1993)
TC 92
Fire safety
2012-10-04
ISO/FDIS 834-12
*
TC 94
ISO/FDIS 13287
Fire resistance tests — Elements of building construction — Part 12: Specific requirements for
separating elements evaluated on less than full scale furnaces
2012-10-25
Personal safety -- Protective clothing and equipment
*
Personal protective equipment — Footwear — Test method for slip resistance
2012-10-03
(Revision of ISO 13287:2006)
ISO/FDIS 16900-3
*
TC 104
ISO
6346:1995/FDAmd
3
Respiratory protective devices — Methods of test and test equipment — Part 3: Determination of
particle filter penetration
2012-10-18
Freight containers
*
TC 106
Freight containers — Coding, identification and marking — Amendment 3
2012-10-10
Dentistry
ISO/FDIS 13078
*
Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
2012-10-10
ISO/FDIS 10323
*
Dentistry — Bore diameters for rotary instruments such as discs and wheels
2012-10-10
(Revision of ISO 10323:1991)
TC 108
ISO/FDIS 18436-1
Mechanical vibration, shock and condition monitoring
*
Condition monitoring and diagnostics of machines — Requirements for qualification and
assessment of personnel — Part 1: Requirements for assessment parties and the assessment
process
2012-10-11
(Revision of ISO 18436-1:2004, ISO 18436-1:2004/Cor 1:2006)
ISO/FDIS 18436-3
*
Condition monitoring and diagnostics of machines — Requirements for qualification and
assessment of personnel — Part 3: Requirements for training bodies and the training process
2012-10-07
(Revision of ISO 18436-3:2008, ISO 18436-3:2008/Amd 1:2009)
ISO/FDIS 18436-5
*
TC 118
ISO/FDIS 11148-3
Condition monitoring and diagnostics of machines — Requirements for qualification and
assessment of personnel — Part 5: Lubricant laboratory technician/analyst
2012-10-07
Compressors and pneumatic tools, machines and equipment
*
Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers
2012-10-17
(Revision of ISO 11148-3:2010)
ISO/FDIS 11148-4
*
Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power
tools
2012-10-17
(Revision of ISO 11148-4:2010)
ISO/FDIS 11148-6
*
Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for
threaded fasteners
2012-10-17
(Revision of ISO 11148-6:2010)
TC 119
ISO/FDIS 7625
Powder metallurgy
*
Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for
determination of carbon content
2012-10-31
(Revision of ISO 7625:2006)
TC 122
ISO/FDIS 3394.2
Packaging
*
Packaging — Complete, filled transport packages and unit loads — Dimensions of rigid rectangular
packages
(Revision of ISO 3394:1984)
TC 126
Tobacco and tobacco products
2012-10-21
ISO/FDIS 20193
*
TC 127
ISO/FDIS 10987
2012-10-30
Earth-moving machinery
*
TC 131
ISO/FDIS 10770-2
Tobacco and tobacco products — Determination of the width of the strands of cut tobacco
Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting
2012-10-08
Fluid power systems
*
Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 2: Test methods for
three-port directional flow-control valves
2012-10-31
(Revision of ISO 10770-2:1998)
TC 135
ISO/FDIS 16809
Non-destructive testing
*
TC 138
ISO/FDIS 15874-1
Non-destructive testing — Ultrasonic thickness measurement
Plastics pipes, fittings and valves for the transport of fluids
*
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1:
General
2012-10-24
(Revision of ISO 15874-1:2003, ISO 15874-1:2003/Amd 1:2007)
TC 147
ISO/FDIS 6341
Water quality
*
Water quality — Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera,
Crustacea) — Acute toxicity test
2012-10-03
(Revision of ISO 6341:1996, ISO 6341:1996/Cor 1:1998)
TC 150
ISO/FDIS 25539-2
Implants for surgery
*
Cardiovascular implants — Endovascular devices — Part 2: Vascular stents
2012-10-10
(Revision of ISO 25539-2:2008)
TC 163
ISO/FDIS 12569
Thermal performance and energy use in the built environment
*
Thermal performance of buildings and materials — Determination of specific airflow rate in buildings
— Tracer gas dilution method
2012-10-17
(Revision of ISO 12569:2000)
TC 172
ISO/FDIS 10341
Optics and photonics
*
Ophthalmic instruments — Refractor heads
2012-10-10
(Revision of ISO 10341:2009)
ISO/FDIS 18369-2
*
Ophthalmic optics — Contact lenses — Part 2: Tolerances
2012-10-10
(Revision of ISO 18369-2:2006)
ISO/FDIS 22665
*
TC 188
ISO/FDIS 21487
Ophthalmic optics and instruments - Instruments to measure axial distances in the eye
2012-10-10
Small craft
*
Small craft — Permanently installed petrol and diesel fuel tanks
2012-10-24
(Revision of ISO 21487:2006, ISO 21487:2006/Cor 1:2008)
ISO/FDIS 25197
*
Small craft — Electrical/electronic control systems for steering, shift and throttle
2012-10-24
ISO/FDIS 15027-1
*
Immersion suits — Part 1: Constant wear suits, requirements including safety
2012-10-17
(Revision of ISO 15027-1:2002)
ISO/FDIS 15027-2
*
Immersion suits — Part 2: Abandonment suits, requirements including safety
2012-10-17
(Revision of ISO 15027-2:2002)
ISO/FDIS 15027-3
*
Immersion suits — Part 3: Test methods
(Revision of ISO 15027-3:2002)
2012-10-17
TC 190
ISO/FDIS 11268-1
Soil quality
*
Soil quality — Effects of pollutants on earthworms — Part 1: Determination of acute toxicity to
Eisenia fetida/Eisenia andrei
2012-10-07
(Revision of ISO 11268-1:1993)
ISO/FDIS 11268-2
*
Soil quality — Effects of pollutants on earthworms — Part 2: Determination of effects on
reproduction of Eisenia fetida/Eisenia andrei
2012-10-07
(Revision of ISO 11268-2:1998)
TC 206
ISO/FDIS 14603
Fine ceramics
*
TC 211
ISO/FDIS 19152
2012-10-11
Geographic information/Geomatics
*
TC 212
ISO/FDIS 15189
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for open-hole
tension of continuous fibre-reinforced ceramic matrix composites at room temperature
Geographic information — Land Administration Domain Model (LADM)
2012-10-31
Clinical laboratory testing and in vitro diagnostic test systems
*
Medical laboratories — Requirements for quality and competence
2012-10-10
(Revision of ISO 15189:2007)
TC 213
ISO/FDIS 2517871
Dimensional and geometrical product specifications and verification
*
TC 215
ISO/FDIS 13119
2012-10-10
Health informatics
*
TC 219
ISO
24342:2007/FDAm
d1
Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software
measurement standards
Health informatics — Clinical knowledge resources — Metadata
2012-10-03
Floor coverings
*
Resilient and textile floor-coverings — Determination of side length, edge straightness and
squareness of tiles — Amendment 1
2012-10-17
(Revision of ISO 13747:1999)
TC 228
ISO/FDIS 13293
Tourism and related services
*
IULTCS
ISO/FDIS 11640
Recreational diving services — Requirements for gas blender training programmes
2012-10-10
International Union of Leather Technologists and Chemists Societies
*
Leather — Tests for colour fastness — Colour fastness to cycles of to-and-fro rubbing
2012-10-24
(Revision of ISO 11640:1993)
ISO/FDIS 11641
*
Leather — Tests for colour fastness — Colour fastness to perspiration
2012-10-24
(Revision of ISO 11641:1993)
ISO/FDIS 11642
*
Leather — Tests for colour fastness — Colour fastness to water
2012-10-24
(Revision of ISO 11642:1993)
ISO/FDIS 14268
*
Leather — Physical and mechanical tests — Determination of water vapour permeability
2012-10-17
(Revision of ISO 14268:2002)
JTC 1
Information technology
ISO/IEC FDIS
14143-6
Information technology — Software measurement — Functional size measurement — Part 6: Guide
for use of ISO/IEC 14143 series and related International Standards
2012-10-21
(Revision of ISO/IEC 14143-6:2006)
ISO/IEC 10373-
*
Identification cards — Test methods — Part 1: General characteristics — Amendment 1
2012-10-21
1:2006/FDAmd 1
Information technology — Multimedia content description interface — Part 12: Query format
ISO/IEC FDIS
15938-12
2012-10-21
(Revision of ISO/IEC 15938-12:2008, ISO/IEC 15938-12:2008/Cor 1:2009, ISO/IEC 1593812:2008/Cor 2:2010, ISO/IEC 15938-12:2008/Amd 1:2011, ISO/IEC 15938-12:2008/Amd 2:2011)
ISO/IEC 230017:2012/FDAmd 1
ISO/IEC FDIS
24791-5
*
Information technology — MPEG systems technologies — Part 7: Common encryption in ISO base
media file format files — Amendment 1: AES-CBC-128 and key rotation
2012-10-21
Information technology — Radio frequency identification (RFID) for item management — Software
system infrastructure — Part 5: Device interface
2012-10-16
Standards published
New International Standards published between 01 August and 31 August 2012
* Available in English only
** French version of standard previously published in English only
Price group
TC 2
Fasteners
ISO 4161:2012
*
Hexagon nuts with flange, style 2 — Coarse thread
D
ISO 7043:2012
*
Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and
B
D
ISO 7044:2012
*
Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B
D
ISO 10663:2012
*
Hexagon nuts with flange, style 2 — Fine pitch thread
C
ISO 12125:2012
*
Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread,
style 2 — Product grades A and B
C
ISO 12126:2012
*
Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product
grades A and B
C
TC 6
ISO 11093-8:2012
Paper, board and pulps
*
TC 8
Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus
by experimental modal analysis
D
Ships and marine technology
ISO 280041:2007/Cor 1:2012
*
Security management systems for the supply chain — Guidelines for the implementation of ISO 28000 —
Part 1: General principles — Technical Corrigendum 1
ISO/PAS 280051:2012
*
Ships and marine technology — Electronic port clearance (EPC) — Part 1: Message structures —
Implementation of a maritime single window system
N
ISO 3434:2012
*
Ships and marine technology — Heated glass panes for ships' rectangular windows
E
free
TC 10
IEC 82079-1:2012
Technical product documentation
*
Preparation of instructions for use — Structuring, content and presentation — Part 1: General principles
and detailed requirements
ISO 13444:2012
Technical product documentation (TPD) — Dimensioning and indication of knurling
TC 17
Steel
XB
D
ISO 16162:2012
*
Cold-rolled steel sheet products — Dimensional and shape tolerances
B
ISO 16163:2012
*
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
C
TC 20
Aircraft and space vehicles
ISO 14721:2012
*
Space data and information transfer systems — Open archival information system (OAIS) — Reference
model
ISO 16159:2012
*
Space systems — Launch pad and integration site — Facility, system and equipment failure analysis
TC 21
Equipment for fire protection and fire fighting
ISO 5923:2012
Equipment for fire protection and fire fighting — Fire extinguishing media — Carbon dioxide
TC 22
Road vehicles
XB
D
H
ISO 13209-2:2012
*
Road vehicles — Open Test sequence eXchange format (OTX) — Part 2: Core data model specification
and requirements
XC
ISO 13209-3:2012
*
Road vehicles — Open Test sequence eXchange format (OTX) — Part 3: Standard extensions and
requirements
XC
ISO 27145-1:2012
*
Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD)
communication requirements — Part 1: General information and use case definition
K
ISO 27145-2:2012
*
Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD)
communication requirements — Part 2: Common data dictionary
Q
ISO 27145-3:2012
*
Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD)
communication requirements — Part 3: Common message dictionary
S
ISO 27145-4:2012
*
Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD)
communication requirements — Part 4: Connection between vehicle and test equipment
J
TC 23
ISO 4254-13:2012
Tractors and machinery for agriculture and forestry
*
TC 27
ISO 501:2012
Agricultural machinery — Safety — Part 13: Large rotary mowers
R
Solid mineral fuels
*
Hard coal — Determination of the crucible swelling number
D
TC 28
Petroleum products and lubricants
ISO 12152:2012
Lubricants, industrial oils and related products — Determination of the foaming and air release properties
of industrial gear oils using a spur gear test rig — Flender foam test procedure
D
Petroleum products — Fuels (class F) — Specifications of marine fuels
N
ISO 8217:2012
*
TC 29
Small tools
ISO 5608:2012
Turning and copying tool holders and cartridges for indexable inserts — Designation
TC 31
Tyres, rims and valves
ISO 4209-2:2012
Truck and bus tyres and rims (metric series) — Part 2: Rims
TC 34
Food products
ISO/TS
21033:2011/Amd
Animal and vegetable fats and oils — Determination of trace elements by inductively coupled plasma
optical emission spectroscopy (ICP-OES) — Amendment 1
F
F
XZ
1:2012
ISO 3972:2011/Cor
1:2012
Sensory analysis — Methodology — Method of investigating sensitivity of taste — Technical Corrigendum
1
TC 35
Paints and varnishes
ISO 9117-4:2012
Paints and varnishes — Drying tests — Part 4: Test using a mechanical recorder
C
ISO 9117-5:2012
Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test
C
ISO 19840:2012
Paints and varnishes — Corrosion protection of steel structures by protective paint systems —
Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
H
TC 37
Terminology and other language and content resources
ISO 10241-2:2012
Terminological entries in standards — Part 2: Adoption of standardized terminological entries
N
Systems to manage terminology, knowledge and content — Design, implementation and maintenance of
terminology management systems
V
ISO 26162:2012
*
TC 38
free
Textiles
Textiles — Determination of drying rate in dynamic state by the modified sweating-guarded hotplate
C
ISO 13629-1:2012
Textiles — Determination of antifungal activity of textile products — Part 1: Luminescence method
K
TC 45
Rubber and rubber products
ISO 1431-1:2012
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain
testing
J
ISO 4656:2012
Rubber compounding ingredients — Carbon black — Determination of oil absorption number (OAN) and
oil absorption number of compressed sample (COAN)
J
Reclaimed rubbers and reclaimed crumb rubbers — Evaluation of dispersion in rubber mixes
D
ISO 3303-1:2012
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 1: Steel-ball method
B
ISO 3303-2:2012
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method
C
TC 58
Gas cylinders
ISO 7866:2012
Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
ISO
7225:2005/Amd
1:2012
Gas cylinders — Precautionary labels — Amendment 1
TC 59
Buildings and civil engineering works
ISO 13029:2012
ISO/TR
16098:2012
ISO/TS
12911:2012
*
*
*
TC 61
Framework for building information modelling (BIM) guidance
V
XZ
M
Plastics
ISO 9772:2012
*
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a
small flame
J
ISO 10210:2012
*
Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials
K
Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring
the oxygen demand in a respirometer or the amount of carbon dioxide evolved
M
ISO 17556:2012
ISO 12418-1:2012
*
Plastics — Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates — Part 1: Designation
system and basis for specifications
D
ISO 12418-2:2012
*
Plastics — Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates — Part 2: Preparation of
test specimens and determination of properties
F
ISO 19712-1:2008
Plastics — Decorative solid surfacing materials — Part 1: Classification and specifications
D
ISO 19712-2:2007
Plastics — Decorative solid surfacing materials — Part 2: Determination of properties — Sheet goods
S
ISO 19712-3:2007
Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface
shapes
R
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries
ISO 28460:2010
Petroleum and natural gas industries — Installation and equipment for liquefied natural gas — Ship-toshore interface and port operations
ISO 135032:2006/Amd 1:2009
Petroleum and natural gas industries — Completion fluids and materials — Part 2: Measurement of
properties of proppants used in hydraulic fracturing and gravel-packing operations — Amendment 1:
Addition of Annex B: Proppand specification
TC 69
Applications of statistical methods
ISO/TR
13519:2012
Guidance on the development and use of ISO statistical publications supported by software
TC 70
Internal combustion engines
ISO 8178-9:2012
Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and
test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition
engines operating under transient conditions
TC 71
Concrete, reinforced concrete and pre-stressed concrete
ISO 16204:2012
*
Durability — Service life design of concrete structures
TC 84
Devices for administration of medicinal products and intravascular catheters
ISO 23907:2012
Sharps injury protection — Requirements and test methods — Sharps containers
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 29661:2012
Reference radiation fields for radiation protection — Definitions and fundamental concepts
TC 86
Refrigeration and air-conditioning
ISO 13971:2012
Refrigeration systems and heat pumps — Flexible pipe elements, vibration isolators, expansion joints and
non-metallic tubes — Requirements and classification
TC 94
Personal safety -- Protective clothing and equipment
ISO/TS 169764:2012
Respiratory protective devices — Human factors — Part 4: Work of breathing and breathing resistance:
Physiologically based limits
TC 107
Metallic and other inorganic coatings
ISO 28721-4:2010
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality
requirements for glass-lined flanged steel pipes and flanged steel fittings
TC 108
Mechanical vibration, shock and condition monitoring
ISO 18437-1:2012
*
TC 114
ISO 64262:2002/Amd 1:2012
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic
materials — Part 1: Principles and guidelines
N
XZ
H
U
P
E
Q
E
H
C
H
Horology
*
Horological vocabulary — Part 2: Technical and commercial definitions — Amendment 1
TC 118
Compressors and pneumatic tools, machines and equipment
ISO 11148-7:2012
Hand-held non-electric power tools — Safety requirements — Part 7: Grinders
TC 119
Powder metallurgy
XZ
U
ISO 5755:2012
Sintered metal materials — Specifications
TC 131
Fluid power systems
ISO 1219-2:2012
*
TC 150
ISO 14708-2:2012
S
Implants for surgery
*
TC 161
ISO 23551-1:2012
Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit
diagrams
R
Implants for surgery — Active implantable medical devices — Part 2: Cardiac pacemakers
V
Control and protective devices for gas and/or oil burners and appliances
*
TC 164
Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part
1: Automatic and semi-automatic valves
R
Mechanical testing of metals
ISO 12107:2012
*
Metallic materials — Fatigue testing — Statistical planning and analysis of data
R
ISO 12108:2012
*
Metallic materials — Fatigue testing — Fatigue crack growth method
S
TC 171
ISO 14289-1:2012
Document management applications
*
Document management applications — Electronic document file format enhancement for accessibility —
Part 1: Use of ISO 32000-1 (PDF/UA-1)
TC 172
Optics and photonics
ISO 23584-2:2012
Optics and photonics — Specification of reference dictionary — Part 2: Classes' and properties'
definitions
ISO 9211-4:2012
Optics and photonics — Optical coatings — Part 4: Specific test methods
TC 176
Quality management and quality assurance
ISO 10018:2012
Quality management — Guidelines on people involvement and competence
TC 184
Automation systems and integration
ISO 18435-2:2012
*
TC 190
Industrial automation systems and integration — Diagnostics, capability assessment and maintenance
applications integration — Part 2: Descriptions and definitions of application domain matrix elements
H
XA
G
L
N
Soil quality
ISO/TS
13896:2012
*
Soil quality — Determination of linear alkylbenzene sulfonate (LAS) — Method by HPLC with
fluorescence detection (LC-FLD) and mass selective detection (LC-MSD)
J
ISO/TS
13907:2012
*
Soil quality — Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates — Method
by gas chromatography with mass selective detection (GC-MS)
J
TC 198
Sterilization of health care products
ISO 13408-7:2012
Aseptic processing of health care products — Part 7: Alternative processes for medical devices and
combination products
TC 204
Intelligent transport systems
K
ISO 17261:2012
*
Intelligent transport systems — Automatic vehicle and equipment identification — Intermodal goods
transport architecture and terminology
P
ISO 17262:2012
*
Intelligent transport systems — Automatic vehicle and equipment identification — Numbering and data
structures
U
TC 205
ISO 13153:2012
Building environment design
*
TC 206
ISO 13383-1:2012
Framework of the design process for energy-saving single-family residential and small commercial
buildings
R
Fine ceramics
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural characterization —
L
Part 1: Determination of grain size and size distribution
ISO 13383-2:2012
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural characterization —
Part 2: Determination of phase volume fraction by evaluation of micrographs
F
ISO 14610:2012
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of
porous ceramics at room temperature
C
TC 209
Cleanrooms and associated controlled environments
ISO 14644-9:2012
Cleanrooms and associated controlled environments — Part 9: Classification of surface cleanliness by
particle concentration
TC 213
Dimensional and geometrical product specifications and verification
ISO 13102:2012
Geometrical product specifications (GPS) — Dimensional measuring equipment: Electronic digitalindicator gauge — Design and metrological characteristics
TC 215
Health informatics
ISO/TR 146391:2012
*
TC 216
Health informatics — Capacity-based eHealth architecture roadmap — Part 1: Overview of national
eHealth initiatives
M
F
U
Footwear
Footwear — Critical substances potentially present in footwear and footwear components —
Determination of organotin compounds in footwear materials
F
ISO/TS
16186:2012
Footwear — Critical substances potentially present in footwear and footwear components — Test method
to quantitatively determine dimethyl fumarate (DMFU) in footwear materials
D
TC 219
Floor coverings
ISO/TS
16179:2012
ISO 11638:2012
*
*
TC 221
ISO 10772:2012
Resilient floor coverings — Heterogeneous poly(vinyl chloride) flooring on foam — Specification
E
Geosynthetics
Geotextiles - Test method for the determination of the filtration behaviour of geotextiles under turbulent
water flow conditions
E
ISO 10776:2012
Geotextiles and geotextile-related products — Determination of water permeability characteristics normal
to the plane, under load
E
TC 226
Materials for the production of primary aluminium
ISO 11706:2012
*
*
TC 229
ISO/TR
11811:2012
Carbonaceous materials for the production of aluminium — Prebaked anodes — Determination of the
fracture energy
Nanotechnologies
*
Nanotechnologies — Guidance on methods for nano- and microtribology measurements
IULTCS
International Union of Leather Technologists and Chemists Societies
ISO 17131:2012
Leather - Identification of leather with microscopy
CASCO
Committee on conformity assessment
ISO/IEC TS 170212:2012
B
*
JTC 1
Conformity assessment — Requirements for bodies providing audit and certification of management
systems — Part 2: Competence requirements for auditing and certification of environmental management
systems
G
F
E
Information technology
ISO/IEC
17998:2012
*
Information technology — SOA Governance Framework
X
ISO/IEC 200003:2012
*
Information technology — Service management — Part 3: Guidance on scope definition and applicability
of ISO/IEC 20000-1
N
ISO/IEC
*
Information technology — Security techniques — Security requirements for cryptographic modules
W
19790:2012
ISO/IEC TR
20004:2012
*
Information technology — Security techniques — Refining software vulnerability analysis under ISO/IEC
15408 and ISO/IEC 18045
J
ISO/IEC 270332:2012
*
Information technology — Security techniques — Network security — Part 2: Guidelines for the design
and implementation of network security
N
ISO/IEC TS
24790:2012
*
Information technology — Office equipment — Measurement of image quality attributes for hardcopy
output — Monochrome text and graphic images
S
ISO/IEC 144963:2009/Cor 3:2012
*
Information technology — Coding of audio-visual objects — Part 3: Audio — Technical Corrigendum 3
free
ISO/IEC 230031:2007/Amd
2:2008/Cor 3:2012
*
Information technology — MPEG audio technologies — Part 1: MPEG Surround — Amendment 2:
Reference software — Technical Corrigendum 3
free
ISO/IEC TR 248001:2012
*
Information technology — JPSearch — Part 1: System framework and components
ISO/IEC 248003:2010/Cor 1:2012
*
Information technology — JPSearch — Part 3: Query format — Technical Corrigendum 1
ISO/IEC 95411:2012
*
Information technology — Font information interchange — Part 1: Architecture
L
ISO/IEC 95412:2012
*
Information technology — Font information interchange — Part 2: Interchange format
A
ISO/IEC 95413:2012
*
Information technology — Font information interchange — Part 3: Glyph shape representation
F
ISO/IEC 295001:2012
*
Information technology — Document description and processing languages — Office Open XML File
Formats — Part 1: Fundamentals and Markup Language Reference
XC
ISO/IEC 295002:2012
*
Information technology — Document description and processing languages — Office Open XML File
Formats — Part 2: Open Packaging Conventions
XC
ISO/IEC 295003:2012
*
Information technology — Document description and processing languages — Office Open XML File
Formats — Part 3: Markup Compatibility and Extensibility
XC
ISO/IEC 295004:2012
*
Information technology — Document description and processing languages — Office Open XML File
Formats — Part 4: Transitional Migration Features
XC
Standards confirmed
The following International Standards are confimred for a five year period:
TC 34
Food products
ISO 1842:1991
(reconfirmed)
ISO 2172:1983
(reconfirmed)
ISO 5523:1981
(reconfirmed)
ISO 6557-2:1984
(reconfirmed)
M
free
ISO 14902:2001
(reconfirmed)
TC 42
Photography
ISO 3028:1984
(reconfirmed)
ISO 3943:1993
(reconfirmed)
ISO 6728:1983
(reconfirmed)
ISO 6846:1992
(reconfirmed)
TC 43
Acoustics
ISO 5129:2001
(reconfirmed)
TC 44
Welding and allied processes
ISO 5175:1987
(reconfirmed)
ISO 8206:1991
(reconfirmed)
ISO 8207:1996
(reconfirmed)
ISO 12170:1996
(reconfirmed)
ISO 14112:1996
(reconfirmed)
TC 127
Earth-moving machinery
ISO 4510-2:1996
(reconfirmed)
ISO 6392-1:1996
(reconfirmed)
ISO 16714:2008
TC 131
Fluid power systems
ISO 4393:1978
(reconfirmed)
ISO 6432:1985
(reconfirmed)
TC 160
Glass in building
ISO 16932:2007
TC 215
Health informatics
ISO 21549-6:2008
Standards withdrawn
Period from 01 August to 31 August 2012
TC 22
Road vehicles
ISO/PAS 27145-1:2006
(replaced by ISO 27145-1:2012)
ISO/PAS 27145-2:2006
(replaced by ISO 27145-2:2012)
ISO/PAS 27145-3:2006
(replaced by ISO 27145-3:2012)
ISO/PAS 27145-4:2006
(replaced by ISO 27145-4:2012)
TC 23
Tractors and machinery for agriculture and forestry
ISO/TR 22520:2005
(replaced by )
ISO/TR 22521:2005
(replaced by )
TC 45
Rubber and rubber products
ISO 3303:1990
(replaced by ISO 3303-1:2012, ISO 3303-2:2012)
TC 204
Intelligent transport systems
ISO/TS 17261:2005
(replaced by ISO 17261:2012)
ISO/TS 17262:2003
(replaced by ISO 17262:2012)
JTC 1
Information technology
ISO/IEC TR 200003:2009
(replaced by ISO/IEC 20000-3:2012)
ISO/IEC 13660:2001
(replaced by ISO/IEC TS 24790:2012)
Meeting calendar
(update at 01 August 2012)
Meetings called for the month of September are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
September-October 2012
30-6
Paris (France)
TC 106
Dentistry
TC 184/SC 1
Automation systems and integration/Physical device control
3rd Quarter 2012
Frankfurt
(Germany)
**
October 2012
1-2
Ottawa (Canada)
TC 34/SC 11
Food products/Animal and vegetable fats and oils
1-5
Vienna (Austria)
TC 247
Fraud countermeasures and controls
3
Ottawa (Canada)
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
3-5
New Orleans
(USA)
JTC 1/SC 17
Information technology/Cards and personal identification
4
Paris (France)
TC 106/SC 9
Dentistry/Dental CAD/CAM systems
4-5
Sierre
TC 226
Materials for the production of primary aluminium
(Switzerland)
5
Berlin (Germany)
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
5
Cambridge
(United
Kingdom)
TC 157
Non-systemic contraceptives and STI barrier prophylactics
6
Chicago (USA)
TC 130
Graphic technology
8
Berlin (Germany)
TC 254
Safety of amusement rides and amusement devices
8-11
Nagoya (Japan)
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
8-11
Castro Verde
(Portugal)
TC 183
Copper, lead, zinc and nickel ores and concentrates
8-12
Concord,
California (USA)
TC 154
Processes, data elements and documents in commerce, industry and administration
8-12
Moscow
(Russian
Federation)
TC 193
Natural gas
9
London (United
Kingdom)
TC 25
Cast irons and pig irons
9-10
Helsinki
(Finland)
TC 17/SC 20
Steel/General technical delivery conditions, sampling and mechanical testing methods
9-10
Montreal
(Canada)
TC 199
Safety of machinery
11
Berlin (Germany)
TC 167
Steel and aluminium structures
11-12
Bogota
(Colombia)
CASCO
Committee on conformity assessment
11-12
Tokyo (Japan)
TC 119
Powder metallurgy
11-12
Neubiberg
(Germany)
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
12
Yokohama
(Japan)
TC 119/SC 3
Powder metallurgy/Sampling and testing methods for sintered metal materials (excluding
hardmetals)
14-19
Tokyo (Japan)
TC 59
Buildings and civil engineering works
15-16
Sydney
(Australia)
TC 2/SC 7
Fasteners/Reference standards
15-18
Praia do Forte
(Brazil)
TC 127
Earth-moving machinery
15-19
Pointe-Claire,
Quebec
(Canada)
TC 6
Paper, board and pulps
15-19
Riccione (Italy)
TC 45
Rubber and rubber products
15-19
Riccione (Italy)
TC 45/SC 1
Rubber and rubber products/Hoses (rubber and plastics)
15-19
Riccione (Italy)
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
15-19
Moscow
(Russian
Federation)
TC 204
Intelligent transport systems
16
Tokyo (Japan)
TC 10/SC 8
Technical product documentation/Construction documentation
16-19
Foulayronnes
TC 70/SC 7
Internal combustion engines/Tests for lubricating oil filters
**
(France)
17
Sydney
(Australia)
TC 2/SC 14
Fasteners/Surface coatings
17
Jeju (Korea,
Republic of)
TC 17/SC 7
Steel/Methods of testing (other than mechanical tests and chemical analysis)
17
Berlin (Germany)
TC 22/SC 9
Road vehicles/Vehicle dynamics and road-holding ability
17
Berlin (Germany)
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing
conditions
17-18
(South Africa)
TC 44
Welding and allied processes
17-19
Guilin (China)
TC 202
Microbeam analysis
18
Sydney
(Australia)
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
18
Riccione (Italy)
TC 45/SC 2
Rubber and rubber products/Testing and analysis
18
Berlin (Germany)
TC 83
Sports and recreational equipment
18
Berlin (Germany)
TC 123/SC 6
Plain bearings/Terms and common items
18-19
Jeju (Korea,
Republic of)
TC 17
Steel
18-19
Beijing (China)
TC 263
Coalbed methane (CBM)
18-20
Los Angeles
(USA)
TC 36
Cinematography
19
Sydney
(Australia)
TC 2
Fasteners
19
Sydney
(Australia)
TC 2/SC 11
Fasteners/Fasteners with metric external thread
19
Agen (France)
TC 22/SC 5
Road vehicles/Engine tests
19
Agen (France)
TC 22/SC 7
Road vehicles/Injection equipment and filters for use on road vehicles
19
Riccione (Italy)
TC 45/SC 3
Rubber and rubber products/Raw materials (including latex) for use in the rubber industry
19
Santa María de
Lamas (Portugal)
TC 87
Cork
19
Berlin (Germany)
TC 123
Plain bearings
19
Berlin (Germany)
TC 123/SC 7
Plain bearings/Special types of plain bearings
19
Amsterdam
(Netherlands)
TC 146
Air quality
21-26
Sapporo (Japan)
TC 92
Fire safety
21-26
Sapporo (Japan)
TC 92/SC 2
Fire safety/Fire containment
22
Messina (Italy)
TC 8/SC 3
Ships and marine technology/Piping and machinery
22
Messina (Italy)
TC 8/SC 6
Ships and marine technology/Navigation and ship operations
22
Messina (Italy)
TC 8/SC 7
Ships and marine technology/Inland navigation vessels
22
Messina (Italy)
TC 8/SC 12
Ships and marine technology/Ships and marine technology - Large yachts
22-23
Beijing (China)
TC 255
Biogas
**
22-26
Rome (Italy)
JTC 1/SC 27
Information technology/IT Security techniques
22-26
Messina (Italy)
TC 8
Ships and marine technology
22-26
Tokyo (Japan)
TC 181
Safety of toys
22-26
Florianopolis
(Brazil)
TC 217
Cosmetics
22-27
Jeju (Korea,
Republic of)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
23
Sydney
(Australia)
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
and drainage (including land drainage)
23-25
Arlington (USA)
TC 58/SC 3
Gas cylinders/Cylinder design
23-26
St. Gallen
(Switzerland)
TC 172/SC 1
Optics and photonics/Fundamental standards
24
Milan (Italy)
TC 12
Quantities and units
24
Sydney
(Australia)
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
supplies
24
Sydney
(Australia)
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply
of gaseous fuels
24-26
Boston (USA)
TC 159/SC 3
Ergonomics/Anthropometry and biomechanics
25
Sydney
(Australia)
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial
applications
25
Sydney
(Australia)
TC 138/SC 5
Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and
valves of plastic materials and their accessories -- Test methods and basic specifications
25
Sydney
(Australia)
TC 138/SC 7
Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of
plastics materials
25
Madrid (Spain)
TC 216
Footwear
25-26
Arlington (USA)
TC 58
Gas cylinders
25-26
Tampa, Florida
(USA)
TC 112
Vacuum technology
25-27
Tampa, Florida
(USA)
TC 201
Surface chemical analysis
26
Chiangmai
(Thailand)
JTC 1/SC 2
Information technology/Coded character sets
26
Sydney
(Australia)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
29-31
Lyon (France)
TC 137
Footwear sizing designations and marking systems
30-31
Berlin (Germany)
TC 269
Railway applications
October-November 2012
29-1
Saitama (Japan)
TC 34/SC 17
Food products/Management systems for food safety
30-2
Berlin (Germany)
TC 20/SC 10
Aircraft and space vehicles/Aerospace fluid systems and components
31-7
Orlando (USA)
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
TC 121/SC 8
Anaesthetic and respiratory equipment/Suction devices for hospital and emergency care use
November 2012
1-2
London (United
Kingdom)
1-30
Wiesbaden
(Germany)
3
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and completion fluids, and well cements
San Diego (USA)
TC 118/SC 6
Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air
systems
5-8
Warsaw (Poland)
TC 98
Bases for design of structures
5-10
Jeju (Korea,
Republic of)
JTC 1
Information technology
6
Milan (Italy)
TC 31/SC 6
Tyres, rims and valves/Off-the-road tyres and rims
6-8
Tokyo (Japan)
TC 17/SC 1
Steel/Methods of determination of chemical composition
6-8
Reykjavik
(Iceland)
TC 234
Fisheries and aquaculture
7
Milan (Italy)
TC 31/SC 7
Tyres, rims and valves/Industrial tyres and rims
8
Berlin (Germany)
TC 22/SC 21
Road vehicles/Electrically propelled road vehicles
8-9
Milan (Italy)
TC 31/SC 5
Tyres, rims and valves/Agricultural tyres and rims
9
Solohturn
(Switzerland)
TC 84
Devices for administration of medicinal products and intravascular catheters
9
Lyon (France)
TC 94/SC 3
Personal safety -- Protective clothing and equipment/Foot protection
10-17
St. Petersburg
(Russian
Federation)
TC 176
Quality management and quality assurance
11-16
Florida (USA)
TC 184/SC 4
Automation systems and integration/Industrial data
12-14
Nagoya (Japan)
TC 189
Ceramic tile
12-16
Kyoto (Japan)
TC 244
Industrial furnaces and associated processing equipment
13-15
Courbevoie,
Paris (France)
TC 39/SC 10
Machine tools/Safety
16
Atlanta (USA)
TC 17/SC 12
Steel/Continuous mill flat rolled products
16
Xian (China)
TC 227
Springs
26-27
Tokyo (Japan)
TC 24/SC 4
Particle characterization including sieving/Particle characterization
26-27
London (United
Kingdom)
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
27-29
Washington, D.C
(USA)
TC 20
Aircraft and space vehicles
28
Vienna (Austria)
TC 138/SC 6
Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for
all applications
28-29
London (United
Kingdom)
TC 259
Project committee: Outsourcing
29-30
(Brazil)
TC 43/SC 1
Acoustics/Noise
30
(Brazil)
TC 43
Acoustics
December 2012
3-4
London (United
Kingdom)
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
3-5
Cochin (India)
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
3-7
Nairobi (Kenya)
TC 223
Societal security
5
Rome (Italy)
TC 147/SC 3
Water quality/Radioactivity measurements
10
Bangkok
(Thailand)
TC 221
Geosynthetics
11-12
Jeddah (Saudi
Arabia)
TC 211
Geographic information/Geomatics
13-14
Milan (Italy)
TC 270
Plastic and rubber machines
**
TC 44/SC 12
Welding and allied processes/Soldering materials
Berlin (Germany)
*
January 2013
7-12
London (United
Kingdom)
*
TC 121/SC 3
Anaesthetic and respiratory equipment/Lung ventilators and related equipment
15-16
Troy (USA)
*
TC 22/SC 11
Road vehicles/Safety glazing materials
23-24
Rio de Janeiro
(Brazil)
**
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Offshore structures
23-25
London (United
Kingdom)
*
TC 69/SC 7
Applications of statistical methods/Applications of statistical and related techniques for the
implementation of Six Sigma
(Unknown)
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
(Australia)
**
TC 248
Project committee: Sustainability criteria for bioenergy
February 2013
4-8
St. Gallen
(Switzerland)
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
4-9
London (United
Kingdom)
*
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
**
JTC 1/SC 35
Information technology/User interfaces
*
TC 229
Nanotechnologies
TC 96/SC 10
Cranes/Design principles and requirements
February-March 2013
25-1
(Korea, Republic
of)
March 2013
3-8
Mexico (Mexico)
12-14
Berlin (Germany)
19-22
Jeju (Korea,
Republic of)
*
TC 107
Metallic and other inorganic coatings
27-28
Geneva
(Switzerland)
*
COUNCIL
Council
(Europe)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
April 2013
8-11
Helsinki
(Finland)
*
TC 117
Fans
8-12
Madrid (Spain)
*
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
16-17
Frankfurt
(Germany)
TC 48
Laboratory equipment
17-18
Xian (China)
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Pipeline transportation systems
22-26
Berlin (Germany)
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of
*
machine systems
23-24
Dresden
(Germany)
**
TC 219
Floor coverings
Paris (France)
**
TC 29/SC 5
Small tools/Grinding wheels and abrasives
Salzburg
(Austria)
**
TC 89
Wood-based panels
Shenzen (China)
**
TC 130
Graphic technology
(USA)
**
TC 178
Lifts, escalators and moving walks
(South Africa)
**
TC 242
Energy Management
TC 251
Project committee: Asset management
**
TC 23/SC 19
Tractors and machinery for agriculture and forestry/Agricultural electronics
April-May 2013
29-3
Calgary
(Canada)
30-2
Calgary
(Canada)
May 2013
10-17
Hangzhou
(China)
**
TC 10
Technical product documentation
13-16
Chicago (USA)
**
TC 195/SC 1
Building construction machinery and equipment/Machinery and equipment for concrete work
13-17
(Italy)
**
TC 29
Small tools
13-17
(Italy)
**
TC 29/SC 8
Small tools/Tools for pressing and moulding
13-17
Guangzhou
(China)
*
TC 68
Financial services
13-17
Guangzhou
(China)
*
TC 68/SC 2
Financial services/Financial Services, security
13-17
Guangzhou
(China)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
13-17
Tokyo (Japan)
**
TC 114
Horology
13-17
Chicago (USA)
**
TC 195
Building construction machinery and equipment
15-16
(Japan)
**
TC 22/SC 1
Road vehicles/Ignition equipment
20-23
Durban (South
Africa)
*
TC 249
Traditional chinese medicine
21-24
Berlin (Germany)
TC 43/SC 3
Acoustics/Underwater acoustics
22-24
Stockholm
(Sweden)
**
TC 145
Graphical symbols
27-31
Shanghai
(China)
*
TC 4
Rolling bearings
(China)
**
TC 10
Technical product documentation
Paris (France)
**
TC 46/SC 11
Information and documentation/Archives/records management
(Unknown)
**
TC 158
Analysis of gases
June 2013
3-4
Berlin (Germany)
**
TC 44/SC 3
Welding and allied processes/Welding consumables
3-6
Milan (Italy)
*
TC 22/SC 13
Road vehicles/Ergonomics applicable to road vehicles
3-7
Washington, D.C
(USA)
*
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
3-8
Warsaw (Poland)
*
TC 96
Cranes
5
Prague (Czech
Republic)
**
TC 115
Pumps
6
Berlin (Germany)
*
TC 44/SC 7
Welding and allied processes/Representation and terms
6-7
Milan (Italy)
*
TC 22/SC 17
Road vehicles/Visibility
9-15
Groenkloof
(South Africa)
*
TC 37
Terminology and other language and content resources
10-14
Sydney
(Australia)
*
REMCO
Committee on reference materials
11-12
(Belgium)
**
TC 17/SC 17
Steel/Steel wire rod and wire products
11-13
Berlin (Germany)
**
TC 156
Corrosion of metals and alloys
13-14
Barcelona
(Spain)
TC 91
Surface active agents
17-21
Shanghai
(China)
**
TC 121
Anaesthetic and respiratory equipment
18-19
(Spain)
**
TC 17/SC 11
Steel/Steel castings
19-20
London (United
Kingdom)
**
TC 22/SC 3
Road vehicles/Electrical and electronic equipment
Washington, D.C
(USA)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and completion fluids, and well cements
Paris (France)
**
TC 86/SC 6
Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
(Germany)
**
TC 180
Solar energy
**
TC 34/SC 4
Food products/Cereals and pulses
*
JTC 2
Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology
2nd Quarter 2013
(Canada)
July 2013
15-19
Paris (France)
August 2013
21-23
(USA)
**
TC 134
Fertilizers and soil conditioners
26-30
(Canada)
**
JTC 1/SC 35
Information technology/User interfaces
September 2013
15-20
Ljimuden
(Netherlands)
*
TC 164
Mechanical testing of metals
18-20
St. Petersburg
(Russian
Federation)
*
GA
General Assembly
21
St. Petersburg
(Russian
Federation)
*
COUNCIL
Council
Paris (France)
**
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
(Unknown)
**
TC 21
Equipment for fire protection and fire fighting
Victoria
(Canada)
**
TC 33
Refractories
(Korea, Republic
of)
**
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing
conditions
(Korea, Republic
of)
**
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
(Korea, Republic
of)
**
TC 123/SC 5
Plain bearings/Quality analysis and assurance
(Korea, Republic
of)
**
TC 123/SC 6
Plain bearings/Terms and common items
(Korea, Republic
of)
**
TC 123/SC 7
Plain bearings/Special types of plain bearings
Tokyo (Japan)
**
TC 142
Cleaning equipment for air and other gases
October 2013
7
Istanbul (Turkey)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
7-11
Istanbul (Turkey)
**
TC 38
Textiles
8
Istanbul (Turkey)
**
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
9
Istanbul (Turkey)
**
TC 38/SC 23
Textiles/Fibres and yarns
10
Istanbul (Turkey)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
11
Garching
(Germany)
**
TC 60
Gears
11
Garching
(Germany)
**
TC 60/SC 1
Gears/Nomenclature and wormgearing
11
Garching
(Germany)
**
TC 60/SC 2
Gears/Gear capacity calculation
14-15
Miami (USA)
**
TC 44/SC 3
Welding and allied processes/Welding consumables
21-26
Berlin (Germany)
*
TC 147
Water quality
Sarajevo (Bosnia
and
Herzegovina)
**
TC 34/SC 12
Food products/Sensory analysis
(France)
**
TC 111/SC 1
Round steel link chains, chain slings, components and accessories/Chains and chain slings
Berlin (Germany)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
Beijing (China)
**
TC 184/SC 2
Automation systems and integration/Robots and robotic devices
(Japan)
**
TC 206
Fine ceramics
November 2013
10
Okinawa (Japan)
**
TC 201
Surface chemical analysis
10-15
Mexico (Mexico)
*
TC 113
Hydrometry
(France)
**
JTC 1
Information technology
(Korea, Republic
of)
**
TC 106
Dentistry
Gaithersburg
(USA)
**
TC 172/SC 9
Optics and photonics/Electro-optical systems
4th Quarter 2013
Month unknown 2013
(South Africa)
**
TC 27
Solid mineral fuels
(Unknown)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
Bratislava
(Slovakia)
**
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied processes
personnel
Porto de
Galinhas (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Norway)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
and drainage (including land drainage)
(Brazil)
**
TC 155
Nickel and nickel alloys
(Sweden)
**
TC 163
Thermal performance and energy use in the built environment
(Unknown)
**
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
(South Africa)
**
TC 202
Microbeam analysis
(Sweden)
**
TC 205
Building environment design
(Portugal)
**
TC 228
Tourism and related services
(Finland)
**
TC 257
General technical rules for determination of energy savings in renovation projects, industrial
enterprises and regions
**
JTC 1/SC 35
Information technology/User interfaces
February 2014
(South America)
May 2014
9-16
London (United
Kingdom)
**
TC 10
Technical product documentation
12-16
London (United
Kingdom)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
15
London (United
Kingdom)
*
TC 68
Financial services
Washington, D.C
(USA)
**
TC 46/SC 11
Information and documentation/Archives/records management
**
TC 178
Lifts, escalators and moving walks
**
TC 135
Non-destructive testing
(USA)
**
REMCO
Committee on reference materials
(Brazil)
**
TC 28
Petroleum products and lubricants
Beijing (China)
**
TC 36
Cinematography
(Germany)
**
TC 37
Terminology and other language and content resources
(Japan)
**
TC 44
Welding and allied processes
(USA)
**
TC 142
Cleaning equipment for air and other gases
(China)
**
TC 164
Mechanical testing of metals
September 2014
(South Africa)
October 2014
Prague (Czech
Republic)
Month unknown 2014
2nd Quarter 2015
(China)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
(South Africa)
**
REMCO
Committee on reference materials
(Finland)
**
TC 10
Technical product documentation
(Finland)
**
TC 44
Welding and allied processes
London (United
Kingdom)
**
TC 142
Cleaning equipment for air and other gases
(China)
**
TC 155
Nickel and nickel alloys
(United
Kingdom)
**
TC 164
Mechanical testing of metals
(Russian
Federation)
**
REMCO
Committee on reference materials
(Australia)
**
TC 44
Welding and allied processes
Month unknown 2015
Month unknown 2016