Monday, 6 October
Biopolymers and Biocompatible Polymers
A-10-25-3
Evaluation of Antibacterial Properties of Dental Materials Containing Quaternary
Ammonium Moieties: Thiol–ene-methacrylate vs. Conventional Methacrylate
System
S. Beigi Burujeny, M. Atai, H. Yeganeh, H. Forouhesh, L. Lormohamadi
A-10-32-1
A-10-32-4
Biocidal and Cytocompatible Polytriazole Coatings based on Soybean Oil
H. Gholami, H. Yeganeh, M. Jalilian, R. Gharibi, and M. Sorayya
Thermosensitive and Antibacterial Semi-Interpenetrating Polymer Network Based
on Polyurethane and Poly(n-isopropylacrylamide) for Wound Dressing
Application
Z. Abdali, R. Gharibi, A. Solouk, and H. Yeganeh
A-10-58-2
Study of Physical
Bionanocomposites
Chemistry
and
Structural
Properties
of
Starch-Tio2
H. Ebrahimi, M. Ghamin, and S.A. Oleyaei
A-10-74-1
Curing Behavior of Silicone Rubber in the Presence of Silicone Oil and Two
Steroid Drugs
S. Karami, M. Imani, and F. Farahmandghavi
A-10-84-1
Evaluation of The Extracted Sericin from Real Degumming Wastewater Using
Applicable Procedure
Z. Mohassel, B. Noroozi, and A.K. Haghi
A-10-101-1
Surface Entrapment of Polyaniline on
Improve Electrical Conductivity
Poly (L-Lactic Acid) (PLLA) Films To
M. Shokri and A. Karkhaneh
A-10-129-1
Converting Date Seed Biomass to Absorbing Hydrogel
A. Sabzevari, K. Kabiri, and H. Jafariyan
A-10-129-2
Converting Cane Bagasse Biomass to Absorbing Hydrogel
A. Sabzevari and K. Kabiri
A-10-131-2
Isothermal Crystallization of Nanocomposites Based on Poly(Lactic Acid)/
Graphene
P. Manafi, I. Ghasemi, M. Karrabi, and H. Azizi
A-10-187-5
Reactive Mixing of Chitosan and Functionalized Acrylic Nanoparticles for
Preparation of a New Generation of Antibacterial Films
S. Torabi, M. Sanei, A. Abdollahi, and A.R. Mahdavian
A-10-208-1
The Effect of Backing Layer on Adhesion Properties of Single Layer Ketoprofen
Transdermal Drug Delivery System
M. Hamedanlou and M. Taghizadeh
A-10-226-2
Effect of Zinc Oxide Nanoparticles on Mechanical Properties of PDMS
B. Boroujerdi, M.T. Khorasani, A. Rabiee, and H. Baharvand
A-10-232-2
Development of Biological Hydroxyapatite /Chitosan Composite for Bone
Substitute Cement
M. Asadollahzadeh, S.M. Rabiee, H. Salimi-Kenari
A-10-234-1
Tuning Surface Tension Properties of Aqueous Scleroglucan Solutions via
Chemical Modification
M. Bakhshi, A. Sharif, and J. Aalaie
A-10-235-2
Gelatin Immobilization onto Polyurethane Urea Surface through Aminolysis
S. Shaneh, F. Shokrolahi, P. Shokrollahi, and H. Yeganeh
A-10-235-5
Fibroblast Cells Behavior on Modified Electrospun Poly(Ε-Caprolactone)/Pydroxy
Apatite Nano-Fibrous Scaffolds Designed for Tissue Engineering
F. Keivani, P. Shokrollahi, M. Zandi, and S. Irani
A-10-264-2
Effect of Solvents on Vancomycin Release From an In Situ-Forming Controlled
Drug Delivery System for Chronic Osteomyelitis Treatment
M. Darestani-Fararahani, E. Vasheghani-Fararhani, F. Ganji, and H. Mobedi
A-10-283-1
Nano Crystalline Cellulose as Modifier of Poly Lactic Acid Foams
R. Behrooz, R. Miraky, and I. Ghasemi
A-10-337-1
Morphology of Electrospun Chitosan/poly (vinyl alcohol)/MMT Nanocomposite
Nanofibers
M. Koosha and H. Mirzadeh
A-10-346-1
The Effect of PVA/Cs Ratio on Poly (vinyl alcohol)/Chitosan Hydrogel
Performance
A. Amjadi, M. Kokabi, and M. Sirousazar
A-10-361-1
Preparation of Poly L-Lactide/Triclosan Nanoparticles for Specific Medical
Applications
S.M. Davachi and B. Kaffashi
A-10-361-2
Poly L-Lactide and PLLA/Triclosan Nanocomposites as Antibacterial Agents
S.M. Davachi, B. Kaffashi, B. Torabinejad, and A. Zamanian
Effect of Rice Husk Bleaching on Mechanical Properties of Poly Lactide/Starch/
A-10-361-3
Rice Husk Blend
J. Mohammadi-Rovshandeh, P. Pouresmaeel-Selakjani, S.M. Davachi, B. Kaffashi
A-10-393-1
Investigation the Simultaneous Effect of Viscosity and Flow Rate Ratio of
Solutions on Coaxial Electrospun Fibers
F. khodkar and N. Golshan Ebrahimi
A-10-399-1
Preparation and Electrospinning of Poly(vinyl alcohol) /Chitosan Derivative Blend
S. Khalaji, N. Golshan Ebrahimi, and H. Hosseinkhani
A-10-400-1
Investigation on Mechanical Properties and Biocompatibility of Multi-walled
Carbon Nanotubes/Polymethyl Methacrylate Composite
V. Sadati, M. Khakbiz, and R. Bagheri
A-10-405-1
Poly (D, L-lactide-co-glycolide)/N-methyl-2-pyrrolidone
Prolonged Delivery of Buprenorphine Hydrochloride
M. Hosseini, H. Mobedi, and A. Jamshidi
Sol-Gel
system
for
A-10-407-1
The Effect of Diferuloylmethane as a Chain Extender on Surface Properties of
Biodegradable Segmented Thermoplastic Polyurethane Elastomers
M. Faghih Abdollahia, M. Ehsani, M. Zandia, P. Shokrollahi
A-10-415-2
Novel Egg White-Nanoclay Bionanocomposites
Y. Shaabani, M. Sirousazar, I. Mirzaee, and F. Kheiri
A-10-418-2
Modification of Solubility and Rheological Properties of Gum Tragacanth by
Gamma Irradiation
S. Teimouri and N. Sheikh
A-10-429-1
Effect of Drug on the Dynamic Mechanical Thermal Properties of Poly(L-lactide)
A. Mashak and H. Mobedi
A-10-429-4
Effects of Solvent Type on in Vitro Lidocaine HCl Release from PLGA-based in
Situ Forming Systems
M. Namvar, H. Mobedi, and A. Mashak
A-10-432-1
Preparation and Characterization of a Novel Biopolymer Chitosan-AcrylamidePAMAM Dendrimer
S. Moshggoo, S. Hajir Bahrami, and M. Sadeghi-Kiakhani
A-10-454-1
Electrospun
Engineering
Nanofibrous
Scaffolds
Based
on
Alginate
for
Skin
Tissue
R. Damircheli, H. Mirzadeh, H. Moradi, Y. Ghazizadeh, and Z. Jalali
A-10-454-2
Electrospun Nanofibrous Scaffolds Based on Chitosan for Skin Tissue
Engineering
R. Damircheli, H. Mirzadeh, H. Moradi, Y. Ghazizadeh, and Z. Jalali
A-10-491-1
Antibacterial Activity of PEG-Chitosan-ZnO Nanocomposite Wound Dress
E. Hadi, A. Karkhaneh
A-10-512-1
Facile and Homogeneous Acetylation of Microcrystalline Cellulose in LiCl/DMAc
Solvent System
F.S. Hosseini, V. Haddadi-Asl, and S.S. Zargarian
A-10-520-3
Effect of Nanoclay Cloisite 20A on Migration Properties of Polylactic Acid for Use
in Biodegradable Food Packaging Applications
E. Khalaj and S. Choubaki
A-10-520-4
Effect of Nanoclay Cloisite 20A on Mechanichal and Thermal Properties of
Polylactic acid for Use in Biodegradable Food Packaging Applications
E. Khalaj and S. Choubaki
A-10-521-1
Biocompatibility Evaluation of Surface-Modified Poly(urethane Urea) Using MTT
Assay
S. Shaneh, F. Shokrolahi, P. Shokrollahi, and H. Yeganeh
A-10-524-1
A Morphological Study of Porous Gelatin/Chitosan Scaffolds Prepared by Freeze
Drying
H. Ghaleh, F. Abbasi, M. Alizadeh, E. Sabzi, and Y. Jahanbani
A-10-524-2
The Effect of the Final Freezing Temperature on the Structural Properties of
Porous Materials Prepared by Freeze Drying
H. Ghaleh, F. Abbasi, M. Alizadeh, E. Sabzi, and Y. Jahanbani
A-10-530-2
Biomimetic Formation of Calcium Phosphate on the Citrated-Starch Suitable for
Bone Tissue Engineering
S. Shahriarpanah, J. Nourmohammadi, and G. Amoabediny
A-10-530-4
XPS Study of Modified Polydimethylsiloxane with 3-Aminopropyltriethoxysilane
Nanolayer Used in Biomedical Applications
T. Hajibabaei, J. Nourmohammadi, G. Amoabediny, and S.H. Jafari
A-10-538-1
Production of Chitosan-PVA-Gelatin-Honey Sheets with Antibacterial Activity
B. Lahooti, M. Khorram, G. Karimi, and A. Emami
A-10-543-1
The Antibacterial Properties of Novel Magnetic Nanobiocomposite Films of
Chitosan/Starch Containing Cyclophosphamide Anticancer Prodrug
M. Fazli and Z. Shariatinia
A-10-543-2
The Swelling and Mechanical Properties of Starch-Chitosan Films Plasticized with
Glycerol
M. Fazli and Z. Shariatinia
A-10-544-2
An Investigation of Treatment Parameters Impact on the Bacterial Cellulose
Mechanical Properties
E. Ebrahimi, M. Hamid, and V. Babaeipour
A-10-544-3
Enhancement of Bacterial Cellulose (BC) Production by Optimizing of Inoculation
Condition: RSM Approach
A.S. Mustafa, V. Babaeipour, M. Roohi, and S. Khanchezar
A-10-544-4
Increasing Bacterial Cellulose production by Optimization of Culture Conditions
M. Rouhi, V. Babaeipour, A. Soleimani, and D. Arabian
A-10-562-2
Surface Modification of Fibers by Bio-Polymeric Treatment or Mechanical Action
to Achieve Higher Fiber Bonding-Ability
H.R. Rudi, Y. Hamzeh, and H. Kermanian
A-10-587-1
Immobilization of Cellulase using Nano-Magnetic Calcium Alginate as a support
Z. Hamidi-Esfahani, K. Karimi, and H. Ghasemzadeh
A-10-587-2
New Antimicrobial Membranes based on Crosslinked-Chitosan
H. Ghasemzadeh, M. Shikhahmadi, and F. Nasrollah
A-10-590-1
Morphology and Pore Size Study of Electrospun Polyurethane Nanofibres Using
Engineered Collector
M. Mashayekhi, H. Mirzadeh, and S. Bagheri-Khoulenjani
A-10-590-2
PLGA/NMP Injectable
Microparticles
Systems
Containing
Temporary
Nanocomposite
S. Esfandiarpour Boroujeni, H. Mirzadeh, and S. Bagheri-Khoulenjani
A-10-590-3
Investigation of the Thermo-mechanical Properties of Chitosan/ Gelatin/ Nano
Clay Composite Films for Wound Dressing Application
B. Moghadas, H. Mirzadeh, A. Abbasi, and A. Solouk
A-10-591-3
Preparation Of Hydrogels By Crosslinking Starch Through Various Diamines
N. Movagharnegad and P. Najafi Moghadam
A-10-594-1
Isoconversional Study of Silicone Rubber Curing Kinetics in the Presence of
Estradiol Benzoate
S.M. Hosseini, F. Farahmandghavi, M. Imani
A-10-615-1
Chitosan-Carbon Nanotube Nanocomposite as a Scaffold for Nerve Ttissue
Engineering
F. Moradi, A. Jamshidi , S. Moemen-e-Bellah, and M. Khorasani
A-10-616-2
Preparation and Characterization of a Novel PVA/Collagen/Chitosan Blend for
Skin Tissue Engineering
I. Ridha and S. Bonakdar
A-10-696-2
The Effect of Concentrations of Chitosan and pH on Chitosan Nanoparticle Size
by Ionic Gelation Method
M. Shahriari, M. Zandi, M. Atai, and P. Shokrolahi
A-10-721-1
Preparation and Microstructural Study of Gelatin-Chitosan/Carbon Nanotube
Composite Scaffolds for Bone Tissue Engineering Applications
A. Sheikh-Mehdi Mesgar, Z. Mohammadi, and S. Khosrovan
A-10-722-1
Preparation and Properties of Electron Beam Cross Linked Hydrogels Based on
Poly (vinyl alcohol) (PVA), Poly(ethylene glycol) (PEG), Chitosan and Agar for
Wound Dressing Applications
Z. Ghorbani, B. Honarvar, H. Mahdavi, and M.A. Shamekhi
A-10-724-1
The Effect of HEMA Concentration on Wetting Angle of Contact Lenses Based on
the Silicone Acrylate Hydrogels
M. Zobeydi, M. Zandi, P. Shokrollahi, M. Atai
A-10-731-1
Preparation And Evaluation of Ciprofloxacin Hydrochloride Release In Poly(Vinyl
Alcohol)/Chitosan/Clay Nanocomposite
M. Ghaedi, M. Karimi, Sh. Bagheri, and H. Nazockdast
A-10-737-1
Synthesis and Characterization of Lactic Acid/Castor Oil Polyol Used for the
Synthesis of Biodegradable Polyurethane
A. Kamel, M. Barikani, J. Morshedian
A-10-737-2
Preparation and Characterization of Poly(ethylene glycol)/Poly(L-lacticacid)
Copolyesters via Direct Melt Polycondensation
A. Kamel, M. Barikani, and J. Morshedian
A-10-748-1
Morphological Evaluation of in Situ Forming Polymeric Scaffold for Tissue
Engineering Applications
M. Hajihasani Biouki, H. Mobedi, and A. Karkhaneh
A-10-750-1
Preparation and Characterization of Poly (hydroxy butyrate)/ Chitosan Blend
Scaffolds for Tissue Engineering Application
S. Khalili
A-10-761-1
Anti-creasing Property of Treated Cotton Fabric with Chitosan-cyanuric Chloride
Hybrid
M. Sadeghi-Kiakhani and A. Zargarkazemi
A-10-761-2
Surface Modification of Polyamide Fabrics with Chitosan-PPI Dendrimer Hybrid
M. Sadeghi-Kiakhani, R. Hashemnia, and K. Gharanjig
A-10-766-1
Synthesis and Modification of Materials Based on Inorganic Polymers of Ssilica
as a Drug Delivery System
S. Hashemikia, N. Hemmatinejad, E. Ahmadi, M. Montazer, and M. Ghasemnejad
A-10-770-2
Nanodiamod as a Peculiar Additive to Improve Tribological Properties of Polymer
Composites
F. Hejazi and A.A. Katbab
A-10-770-3
Combination of Electrospun Nanofibers and Coral Micro Particles to Improve
Mechanical Properties as Well as the Porosity and Pore Size of the Resultant
Scaffold
F. Hejazi and H. Mirzadeh
A-10-785-1
Effect of Isocyanate Modification of Rice Husk as a Filler on the Properties of
Rigid Polyurethane Foam
M. Golmohammadi, M. Barmar, and M. Barikani
A-10-812-1
Grafting of Maleic Anhydride On Poly(L-Lactic Acid) And Its Characteristics
A. Esmailzadeh, F. Rekabdar, H. Hossein Khanli
A-10-813-1
XeCl Laser Irradiation of PES/PVP Membranes
A. Hashemipanah, H. Pazokian, M. Mollabashi, J. Barzin, and A. Tabatabaei
A-10-816-3
The Modified Alginate Hydro Gel System Used For Cartilage Tissue Engineering
Repair
A. Hasani, M. Abdouss, and T. Hoseinifar
A-10-818-2
A Novel Method for Producing Gelatin Nanofibers Contains Hydroxyapatite
Nanoparticles
Z. Jalali, V. Haddadi-Asl, I. Shabani, M. Soleimani, and R. Damircheli
A-10-825-1
Achieve to Asymmetric Polyethersulfone (PES) Membrane by Combined Phase
Separation Method
M. Khorsand-Ghayeni, J. Barzin, and M. Zandi
A-10-845-1
Preparation and Characterization of Electrospun
Thermoplastic Urethane Elastomer and Gelatin
Nanofiber
Based
on
M. Jafaie Menarbazari and A.A. Katbab
A-10-849-2
Biocompatibility Evaluation of In Situ Photopolymerized Gel Based on Poly(ethylene glycol) Dimethacrylates
E. Hosseinzadeh and M. Atai
A-10-856-1
Microsphere Embedded Matrix: a New Method for Drug Co-Therapy
M. Jafari-Nodoushan, J. Barzin, and Hamid Mobedi
Polymer Blends and Composites
A-10-57-2
A-10-57-3
A-10-65-1
Rheological Behavior of PBT/PP/Organoclay Nanocomposites
A. Hajibaba, M. Masoomi, H. Nazockdast
Effect of Nanoclay of Morphology of PBT/PP Polymer Blend
A. Hajibaba, M. Masoomi, and H. Nazockdast
Scrutiny of Viscoelastic Behavior of Chloroprene/Poly(methyl Methacrylate)
Interpenetrating Polymer Networks
F. Zahedi, I. Amiri Omaraei, M.A. Fathizade
A-10-77-1
Mechanical Properties of Unidirectional
Nanofibers Mutiscale Composites
UHMWPE
Fiber/Epoxy/
Carbon
M. Ahmadi, M. Masoomi, and B. Ahmadi
A-10-89-1
A-10-126-1
Effect of Nano Clay on Oxygen Permeability of LDPE/EVOH Nanocomposites
J. Moreshedian, V. Rajabpoor, A.A. Yousefi, A. Sharif Pakdaman
Effects of Multi-walled Carbon Nanotubes on Morphological and Mechanical
Properties of PA6/ECO Blend
A. Irani, Gh. Naderi, and M.H.R. Ghoreishy
A-10-131-1
A-10-141-1
Compression Creep Recovery of Nanocomposite Foams Based on Low Density
Polyethylene/Ethylene Vinyl Acetate Blends
M. Riahinezhad, S. Gomari, I. Ghasemi, M. Karrabi, and H. Azizi
Preparation of Phosphorous Flame Retardant Polystyrene Nanocomposites with
Flammability and Thermal Stability Properties
J. Sakhaei Niroumand, S.J. Peighambardoust, and A. Shenavar
A-10-141-2
Preparation of Biodegradable High Impact Polystyrene/starch Blends and
Evaluation of their Thermal and Impact Properties
A. Mahmoudi Yayshahri, S.J. Peighambardoust, and A. Shenavar
A-10-141-3
Preparation of Flame Retardant Polystyrene via Bulk Polymerization Method and
Evaluation of Its Flammability Properties
R. Faridvand, S.J. Peighambardoust, and A. Shenavar
A-10-141-4
A-10-178-2
Impact and Thermal Properties of Biodegradable Polystyrene/Starch Blends
H. Heshmat Ebrahim, S.J. Peighambardoust, and A. Shenavar
Effect of Ozone Degradation on Hyperelastic Properties of a Tire Sidewall
Compound
M.H.R. Ghoreishy, Gh. Naderi, and B. Roohandeh
A-10-178-4
Thermal Diffusivity of PP/EPDM/Clay Nanocomposites: A New Combined
Experimental/Numerical Method
M.H.R. Ghoreishy, Gh. Naderi, and M. Pahlavan
A-10-239-1
Thermo-Mechanical Behavior of Nano Aluminum Oxide Polymeric Thin Film
A.A. Azemati and B. Shirkavand Hadavand
A-10-257-1
Morphology Development in Rubber nanocomposites Filled with Different
Nanoclay Contetnts
S. Mohammadian-Gezaz, M. Karrabi, and M. Taheri
A-10-273-2
A-10-321-2
Synthesis of Magnetite-PAM-Silica Hybrid Composites
A. Ershad-Langroudi, Gh. Ershad-Langroudi, F. Ershad-Langroudi, and F. Salahi
Effect of Micro Balloon Content on Glass Transition Temperature of Unsaturatedbased Polyester Syntactic Foam
A. Farmany, S.M. Mirabedini, and M. Esfandeh
A-10-329-3
Preparation of Ethylene Vinyl Acetate Copolymer/Graphene Oxide Nanocomposite
Films Via Solution Casting Method and Product Investigation
M. Bahmanyar, A. Ramazani, and H. Baniasadi
A-10-340-1
The Effect of Nanoclay on Viscoelastic Behavior of Polyethylene/Polyamide6
Polymer Blend
M. Javanshir, M. Masoomi, R. Bagheri, and A. Hajibaba
A-10-344-1
Rheological and Crystallization Properties of Polyamide 6/ Carbon Nano Tube
Nanocomposites: Effect of Functionalization and Length of CNT
M. Faghihi, A. Shojaei, and R. Bagheri
A-10-345-1
A-10-345-2
A-10-345-3
Study of Water Absorption Behavior in IPN Polymeric Systems
Z. Rajabtabar, M. Ehsani, M.B. Alavi, and Kh. Khodabakhshi
Investigation of Morphology and Impact Resistance of Nano-Graphene Composite
Based on Ester Gelcoats
Z. Rajabtabar, M. Ehsani, M.B. Alavi, and Kh. Khodabakhshi
Investigating the Influence of Nanoglass Flake and Glassfibers on the Flaxtural
Properties of Neopantylglycol Unsaturated Polyester Resin
D. Fattahinajad, M.B. Alavi, M. Ehsani, and Kh. Khodabakhshi
A-10-359-2
Effect of SEBS-g-MA Incorporation on the Morphology Type and Size of Dispersed
Particles in PA6/SAN/SEBS Ternary Blends
A. Babaei and A. Arefazar
A-10-359-3
An Investigation on the Correlation between the Morphological and Mechanical
Properties of PA6/SAN/SEBS Ternary Blends Incorporating SEBS-g-MA
A. Babaei and A. Arefazar
A-10-365-1
Effect of Compatibilizer on Morphology and Mechanical Properties of PA6/SEBS
Blends
F. Alirezayi, J. Morshedian, S. Ahmadi, M. Rakhshanfar
A-10-366-2
Improvement of Insulator and Composite Propellant Adhesion by Surface and
Bulk Modification of EPDM
T. Farajpour, Y. Bayat, and M. Ghorbani
A-10-384-1
Effect of Bimodal Carbon Black Particle Size on Rheometric and Vulcanization
Characteristics of SBR Compounds
E. Shakeri, M. Razzaghi-Kashani, and M.H. Navid-Famili
A-10-391-1
Effect of TiO2 Particle Size on Dielectric Properties of Ethylene-Propylene Rubber
Composites
M. Sadroddini and M. Razzaghi Kashani
A-10-417-1
A-10-418-1
Preparation of Exfoliated Sodium-montmorillonite via 3-aminopropyltriethoxysilane Grafting: A Novel Method
J. Aalaie, M. Fardi, Gh. Khanbabaei, and F. Rekabdar
Evaluation of Thermal Properties and Morphology of Polypropylene/Polyethylene
Blends
N. Sheikh and F. Khoylou
A-10-419-1
Polyethylene/Cloisite 20A Nanocomposites with Improved Mechanical and
Thermal Properties for Preparation of Natural Gas Transportation Pipes
S. Parmoor, M. Sirousazar, F. Kheiri, M. Kokabi, and G. Alizadeh
A-10-421-1
The Role of Organoclay on Thermal and Mechanical Properties of Poly(Butylene
Terephtalate)/Epoxy/Organoclay Hybrid Systems
A. Shabani, M.M. Salehi, and O. Moini
A-10-434-5
Surface Modification of PP-EPDM Used in Automotive Industry by Electrogenerated Silver (II)
S. Mokhtari, F. Mohammadi, M. Nekoomanesh
A-10-459-1
Preparation of Anti Corrosion Coatings Based on Polysulfone/epoxy Resinhardener and Its Physical and Chemical Properties
B. Razavi, N. Ramezanian, S. Ahmadjo
A-10-462-1
Thermal Conductivity of Polyamide Composites Contained Microwave Assisted
Expanded Graphite
M. Poostforush and H. Azizi
A-10-462-2
A-10-468-1
Thermal Conductivity of Polyamide Composites Contained Ceramics
M. Poostforush
Electromagnetic Interference Shielding of Graphene nano sheet/Polyurethane
Foams
J. Nasrollah Gavgani, J. Dastjerdi, D. Zaarei
A-10-476-2
Anomalous phase separation behavior in dynamically asymmetric LCST polymer
blends
J. Khademzadeh Yeganeh, F. Goharpey, and R. Foudazi
A-10-477-1
A-10-494-1
Effect of Long Fibers Angle on Transverse Strength in Polyester Pultruded Rod
B. Jouyandeh, M.R. Vaseghi, and A.H. Haghighi
Incorporation of MIL-53(Al) MOF in Polyethersulfone for Preparation of CO2/CH4
Separation Mixed Matrix Membrane
H. Mahdavi, A. Tavassoli, H. Molavi, and E. Ahmadi Feijani
A-10-496-1
Effect of Graphite Nano Particles on Thermal and Mechanical Properties of Short
Carbon Fiber Reinforced Phenolic Nanocomposites
R. Akhlaghi Astaneh and A.R. Bahramian
A-10-504-1
A-10-511-1
Rheological Behavior of HDPE/bitumen Nanocomposites
M. Mohammadi, A. Tavakoli, M.K. Razavi Aghjeh, and M. Rahi
Studies on the Morphology and Mechanical Properties of PP/EPDM Blend
Reinforced with Talc Powder
H. Yazdani and I. Ghasmi
A-10-511-2
Effect of Processing Conditions on Polypropylene Compounds Properties in a
Single Screw Extruder
H. Yazdani and A. Vahidi
A-10-511-3
Investigation of Buss and Werner Compounders on the Improvement of Filler
Dispersion of Polypropylene Compounds
H. Yazdani and A. Vahidi
A-10-519-1
Effects of Starch Nanocrystals and Sodium Montmorillonite on the Structure and
Properties of Polyvinyl Alcohol Nanocomposite Films
K. Nankali, S. Naderzadeh, and A.R. Shakeri
A-10-522-1
A-10-533-1
Reaction to Fire of CFRP and GFRP Epoxy Composites in Bench-scale
S. Bakhtiari, L. Taghiakbari, and M. Jamali Ashtiani
Morphological and
Nanocomposites
Barrier
Properties
of
Blow
Molded
HDPE-nanoclay
S. Abdollahi and H. Garmabi
A-10-534-1
Influence of Carboxylated Multi-walled Carbon
Biodegradable Poly(amide-imide) Nanocomposites
Nanotubes
in
Potentially
S. Mallakpour, A. Abdolmaleki, M. Rostami
A-10-546-1
Rubber Toughened
Correlation
Polyamide6
nanocomposites:
Microstructure-Properties
S. Shokoohi, F. Naderpoor, G. Naderi, M.R. Kalaei
A-10-569-2
A-10-569-3
Optimization of Toughness and Stiffness in Wollastonite Filled Polypropylene
M.M. Khorasani and H. Sobhani
Role of the Friction Coefficient and Viscoelastic Effects on the Scratch Surface
Damage of Mineral Reinforced Polypropylene
H.Sobhani, M.M. Khorasani
A-10-570-1
Preparation and Properties of EPDM Nanocomposites Reinforced by Carbon
Nanotubes
Z. Rajabi, F. Afshar Taromi, and A. Kargari
A-10-578-1
A-10-586-1
Mechanical Properties of Tubular Composites
Z. Tadi Beni, E. Ghorbani, and M. Ghane
Fabrication and Characterization of Zeolite-Polyamide Thin Film Nanocomposite
(TFN) Nanofiltration Membrane
P. Askari, A. Ghaee, S. Sabbaghi, and M.M. Zerafat
A-10-587-3
Sodium Alginate/Talc-g- Poly Sodium Acrylate Nanocomposite for Delivery of
Indomethacin
H. Ghasemzadeh and H. Rashvand
A-10-592-1
The Novel Ternary Hybrids Resulted from the Incorporation of Poly(amide-imide)ZnO into the Poly(vinyl alcohol) Matrix
Sh. Mallakpour and V. Behranvand
A-10-601-2
Thermal Stability and Flame Resistance of EVA in the Presence of Nanoclay and
an Intumescent Flame Retardant System
M. Entezam, S. Raji, and D. Nozari
A-10-619-1
Compatibility and Thermal Properties of Poly (Ethylene Terephthalate)/Poly
(Lactic Acid) Blends
D. Mahabadi, H. Azizi, M. Karrabi, and I. Ghasemi
A-10-620-1
A-10-622-1
Thermal and Mechanical Properties of PC/SAN Blend and Carbon Nanotube
Nanocomposite
S. Araski and A. Arefazar
Evolution of Heat Resistance and Flammability of Unsaturated Polyesters and
Epoxy Resins
M.A. Fathizade and M.H. Beheshty
A-10-623-1
A Study of Thermal and Mechanical Properties of the Polylactide/Poly (ethylene
glycol)/Nano-silica
M. Faramarzi, S. Ahmadi, and A. Salimi
A-10-623-2
A-10-661-1
A-10-662-1
Preparation and Characterization of (polylactide)/( polyethylene glycol ) Blends
M. Faramarzi, S. Ahmadi, and A. Salimi
Novel Microwave Irradiation Assisted Foaming of EPDM/PP Blend
Sh. Peyda, J. Morshedian, M.T. Khorasani, and H. Baharvand
Preparation of Magnetic (NiO/Polydimethylsiloxane)
Attachment of Fibroblast Cells Study
Nanocomposite
for
M. Hajisadeghi, M.T. KHorasani, and H. Baharvand
A-10-666-1
Hybrid Bionanocomposite of Starch/
Preparation and Characterization
PVA/Starch
Nanocrystals/
Na +-MMT:
S. Naderizadeh, K. Nankali, and A.R. Shakeri
A-10-668-1
Role of Matrix Modification on Interlaminar Shear Strength of Hybrid Resole
Based Carbon Fiber/graphene Nanocomposites
M.S. Motafaker, M. Esfandeh, A.M. Rezadoust
A-10-673-1
Mechanical Properties of the Epoxy Resin-Based Composites Toughened by
CTBN Rubber
M. Hosseini, M. Esfandeh, M. Razavi-Nouri, and A.M. Rezadoust
A-10-673-3
Effect of Microsphere Content on Hardness & Electrical Properties of Unsaturated
Polyester Resin/PMMA Microsphere Syntactic Foams
A. farmany, M. Esfandeh, and S.M. Mirabedini
A-10-695-1
A Comparison Study on the Effect of PEI-functionalized Fe3O4 Nanoparticles on
Termal Properties of PLA
M. Khoobi, M. Shabanian, A. Shafiee, M. Zamani, M. Pirali Hamedani, and M. Pirali
Hamedani
Influence of Polyetheleneimine-functionalized MCM-41on Fire Retardancy and
A-10-695-2
A-10-714-1
A-10-720-1
Thermal Stability of Poly(vinyl Alcohol)
M. Shabanian, M. Khoobi, A. Shafiee, M. Pirali Hamedani, M. Pirali Hamedani, and
M. Zamani
The Kinetic Analysis of Isothermal Curing Reaction of ZnO Filled Epoxy Resin
M. Ghaffari, M. Vandalvand, E. Avazverdi, M. Ehsani
Effect of EVA on Electrical Properties of LDPE
H. Amrollahi Bioki and M. Borhazi Zarandi
A-10-732-1
A-10-750-2
Influence of Nanoparticles on Miscibility of Polymer Blends
S. Babadi
Blending of NR/BR/ENR/EPDM-g-GMA by Reactive Processing for Tire Sidewall
Applications
S. Khalili
Mechanical and Thermal Properties of HDPE/ Wood Flour Nanocomposite
A-10-750-3
A-10-764-2
K. Tavakoli Hafshejani, S. Nouri Khorasani, M. Jahadi, M. Sharifi Hafshejani, and
S. Khalili
Role of Multiwalled Carbon Nanotubes (MWCNTs) on Rheological, Thermal and
Electrical Properties of PC/ABS Blend
M.J. Fayazi, M. Masoomi, A. Rostami, and F. Eskandari
A-10-765-1
Preparation and Characterization of Nanocomposite Membrane Based on Singlewalled Carbon Nanotubes for Gas Separation
F. Dezhagah, L. Naji, and G. Khanbabaei
A-10-770-1
Nanodiamod as a Peculiar Additive to Improve Tribological Properties of Polymer
Composites
F. Hejazi and A.A. Katbab
A-10-796-1
The Effect of TiO2 and CaCo3nano Particles on Mechanical and Thermal Properties
of PVC/ABS Blend
F. Salehiravesh and A. Arefazar
A-10-811-1
Effect of Graphene Nanoplatelets on the Fracture Toughness of Nanocomposites
Based on Epoxy Resin
M.A. Ghanbari and A.R. Bahramian
A-10-848-1
Investigation on Miscibility and Compatibility of PP/EVA Blends
M. Razavi Aghjeh, S.H. Jafari, H.A. Khonakdar, and U. Wagenknecht
Polyolefins
A-10-41-3
A-10-61-1
Active Site Formation in Phillips CrO3/SiOx Catalysts: A DFT Study
N. Bahri-Laleh, M. Karimi, and M. Ghambarian
Ethylene Polymerization with Hybrid Nickel α-diimine/Cp2TiCl2/MgCl2 Catalyst to
Prepare Blends of Linear and Branched Polyethylene
H. Jafariyan, M. Mortazavi, S. Ahmadjo, G.H. Zohuri, S. Dehgjani, and A. Farhadi
A-10-61-2
A-10-193-1
A-10-193-2
Synthesis of PE Reactor Alloys Using Ziegler-Natta/ Late Transition Metal Hybrid
Catalyst: Study of Vinyl Content and Molecular Weight
S. Dehghani, S. Ahmadjo, S.M.M. Mortazavi, G.H. Nejabat, G.H. Zohuri, H. Jafarian,
and M. Omidvar
Bis(imino)pyridyl Iron Complexes Immobilized on
Polymerization: Effect of Polymerization Temperatures
MgCl2
for
Ethylene
G.H. Zohuri, A. Ghotbi Taheri, S.M.M. Mortazavi, S. Ahmadjo, M. Zahmati, M.
Valieghbal, and D. Jafarifard
Rheological Pproperties of Linear/branched Polyethylene Blend Synthesized by
Metallocene/late Metallocene Hybrid Catalyst
H. Jafariyan, M. Mortazavi, S. Ahmadjo, M. Zahedi, M. Ahmadi, and M. Kazemi
A-10-193-3
A-10-213-1
Study on Morphology of Polyethylene Obtained Using Homogeneous and
Supported Nickel α-diimine Catalyst
M. Mortazavi, S. Ahmadjo, H. Jafariyan, H. Poortarah, E. Abbasi, H. Khabbazi, O.
Maniee, A. Ghaed Amini, and A. Rezaiee Kalaj
Synthesis of Bis[N-(3-t-butyl-5-methoxysalicylidene) Benzylaminato] Zirconiume
(IV) Dichloride Catalyst for Ethylene Polymerization
R. Jamjah, M. Nekoomanesh, and R. Zahedi
A-10-218-1
Tailoring the Properties of Polypropylene Synthesized by 4 th Generation ZieglerNatta Catalyst with Different External Electron Donors
S. Hakim, M. Nekoomanesh, and A. Shahrokhinia
A-10-333-1
A-10-388-2
Transport properties in Hyperbranched Polyurethane as Barrier Materials
M. Emamikia, M. Barikani, and G.R. Bakhshandeh
Copolymerization
of
Ethylene
with
Diene
Comonomers
Bis(2-PhInd)ZrCl2 as Metallocene Catalyst: ΙΙ. Response Surface Method
using
H. Arabi and Z. Balzadeh
A-10-388-3
Copolymerization
of
Ethylene
with
Diene
Comonomers
Bis (2-PhInd) ZrCl2 as Metallocene Catalyst: ΙΙΙ. Kinetic Study
Using
H. Arabi and Z. Balzadeh
A-10-416-1
Influence of Concentration and Cocatalyst Type on 1-octene Polymerization Using
Superactive Ziegler-Natta Catalyst
H. Hallajzadeh Nayeri and F. Afshar Taromi
A-10-416-2
Preparation Methods of High Active and Stable Ti-based Catalysts to Synthesis
Ultra High Molecular Weight, Amorphous Poly(1-octene)
H. Hallajzadeh Nayeri and F. Afshar Taromi
A-10-463-2
Theoritical Study on the Effects of Reversible Transfer Reaction in Chain
Shuttling Polymerization
A. Nasr-Esfahani and M. Ahmadi
A-10-510-1
Thermal Degradation Behavior of Polyethylene Grades in Presence of Phenolic
and Phosphite-Based Antioxidant Additives Compound
K. Afzali, A. Keshavarzian, and R. Rashedi
A-10-518-1
Effect of Molecular Structure on Environmental Stress Crack Resistance of
Polyethylene Used in Caps and Closures
A. Sepahi and R. Rashedi
A-10-569-1
Kinetic Study of “Comonomer Effect” in the Copolymerization of Ethylene/1Hexene; an Investigation on the Role of Hydrogen
Gh. Khodarahmi, M. Khakpour, S.M. Ghafelebashi, and M.M. Khorasani
A-10-764-3
Glycidyl Methacrylate/styrene Melt Grafting onto Polypropylene by Co-rotating
Twin Screw Extruder
A. Rostami, M.R. Maleki Sede, and H. Garmabi
A-10-814-1
Effect of Curing Time on Dynamic/Mechanical and Tensile Properties of
Crosslinked High Density Polyethylene
J. Dastjerdi and H. Garmabi