International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft
International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 July to 31 July 2012
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 5
Ferrous metal pipes and metallic fittings
ISO/CD 16631
Ductile iron pipes, fittings, accessories and their joints for water distribution
TC 6
Paper, board and pulps
ISO/CD 5630-7
Paper and board — Accelerated ageing — Part 7: Exposure to light
ISO/DTS 17958
Paper and board — Determination of fracture toughness — Constant rate of elongation method (1,7 mm/s)
TC 8
Ships and marine technology
ISO/CD 17683
Ships and marine technology — Ceramic welding backing
TC 10
Technical product documentation
ISO/CD 129-2
Technical product documentation — Indication of dimensions and tolerances — Part 2: Dimensioning of mechanical
engineering drawings
TC 17
Steel
ISO/CD 16574
Determination of percentage of resolvable pearlite in the high carbon steel wire rod
TC 20
Aircraft and space vehicles
ISO/CD 16158
Space systems - Avoiding collisions with orbiting objects
ISO/CD 16709
Realtime solar activity and space environment information for spacecraft operation
TC 22
Road vehicles
ISO/CD 15031-7
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 7:
Data link security
ISO/CD 17215-1
Road vehicles — Video communication interface for cameras (VCIC) — Part 1: General information and use case
definition
ISO/CD 17215-2
Road vehicles — Video communication interface for cameras (VCIC) — Part 2: Service discovery and control
ISO/CD 17215-4
Road vehicles — Video communication interface for cameras (VCIC) — Part 4: Implementation of communication
requirements
ISO/CD 27145-6
Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication
requirements — Part 6: External test equipment
ISO/CD 16250
Road vehicles — Objective rating metrics for dynamic systems
TC 29
Small tools
ISO/CD 7738
Assembly tools for screws and nuts — Combination wrenches — Lengths of wrenches and maximum thickness of
heads
TC 34
Food products
ISO/CD 16779
Sensory analysis — Assessment (determination and verification) of the shelf life of foodstuffs
TC 43
Acoustics
ISO 101403:2010/CD Amd 3
Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound
insulation — Amendment 3
ISO/CD 16283-2
Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound
insulation
TC 60
Gears
ISO/CD 14104
Gears — Surface temper etch inspection after grinding
TC 61
Plastics
ISO/CD 17541
Plastics — Quantitative evaluation of scratch-induced damage and scratch visibility
TC 69
Applications of statistical methods
ISO/CD 17258
Benchmark for Six Sigma method
TC 76
Transfusion, infusion and injection, and blood processing equipment for medical and
pharmaceutical use
ISO/CD 11040-7
Prefilled syringes — Part 7: Packaging systems for prefillable ready-to-use syringes
TC 81
Common names for pesticides and other agrochemicals
ISO/CD 765
Pesticides considered not to require common names
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 17099
Radiation Protection — Performance criteria for laboratories using the cytokinesis-blocked micronucleus assay in blood
lymphocytes for biological dosimetry
TC 94
Personal safety -- Protective clothing and equipment
ISO/CD 17723-1
Hazardous Materials Response Personal Protective Equipment — Part 1: Gas-Tight, Vapor-Protective Ensembles for
Emergency Response Teams ("Type 1")
ISO/DTS 16976-5
Respiratory protective devices — Human factors — Part 5: Thermal effects
ISO/DTS 16976-7
Respiratory protective devices — Human factors — Part 7: Hearing and speech
ISO/DTS 16976-8
Respiratory protective devices — Human factors — Part 8: Ergonomic factors
ISO/CD 17420-1
Respiratory protective devices — Performance requirements — Part 1: Supplied breathable gas devices
ISO/CD 17420-2
Respiratory protective devices — Performance requirements — Part 2: Filtering devices
TC 121
Anaesthetic and respiratory equipment
ISO 80601-213:2011/CD Amd 1
Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an
anaesthetic workstation — Amendment 1
ISO/CD 10079-1
Medical suction equipment — Part 1: Electrically powered suction equipment — Safety requirements
TC 122
Packaging
ISO/DTR 17350
Direct Marking on Plastic Returnable Transport Items (RTIs)
ISO/DTR 17370
Application Guideline on Data Carriers for Supply Chain Management
TC 126
Tobacco and tobacco products
ISO/DTR 17219
Human smoking behaviour — Review and recommendations for machine smoking of cigarettes
TC 158
Analysis of gases
ISO/CD 6145-2
Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 2: Volumetric pumps
TC 164
Mechanical testing of metals
ISO/CD 6892-1
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
ISO/CD 14577-4
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for
metallic and non-metallic coatings
TC 172
Optics and photonics
ISO/CD 11978
Ophthalmic optics — Contact lenses and contact lens care products — Labelling
TC 173
Assistive products for persons with disability
ISO/CD 17049-1
Accessible design — Methods of displaying braille signage — Part 1: Principles
TC 190
Soil quality
ISO/CD 11268-3
Soil quality — Effects of pollutants on earthworms — Part 3: Guidance on the determination of effects in field situations
TC 204
Intelligent transport systems
ISO/CD 16786
Intelligent transport systems — The use of simulation models for evaluation of traffic management systems: input
parameters and reporting template for simulation of traffic signal control systems
ISO/CD 17444-2
Electronic fee collection — Charging performance — Part 2: Examination framework
TC 206
Fine ceramics
ISO/CD 17172
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of compaction properties of
ceramic powders
TC 220
Cryogenic vessels
ISO/CD 21029-2
Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2:
Operational requirements
TC 223
Societal security
ISO/CD 22324
Societal security - Emergency managament - Colour-coded alert
TC 229
Nanotechnologies
ISO/DTS 80004-6
Nanotechnologies — Vocabulary — Part 6: Nanoscale measurement and instrumentation
TC 249
Traditional chinese medicine
ISO/CD 17217
Ginseng seeds and seedlings, Panax ginseng C.A. Meyer
ISO/CD 17218
Sterile acupuncture needles for single use
JTC 1
Information technology
ISO/IEC CD
15026-1
Systems and software engineering — Systems and software assurance — Part 1: Concepts and vocabulary
ISO/IEC CD 25051
Software engineering — Software product Quality Requirements and Evaluation (SQuaRE) — Requirements for quality
of Commercial Off-The-Shelf (COTS) software product and instructions for testing
ISO/IEC PDTR
24772
Information technology — Programming languages — Guidance to avoiding vulnerabilities in programming languages
through language selection and use
ISO/IEC CD 29121
Information technology — Digitally recorded media for information interchange and storage — Data migration method
for DVD-R, DVD-RW, DVD-RAM, +R, and +RW disks
ISO/IEC CD 30190
Information technology — Digitally recorded media for information interchange and storage — 120 mm Single Layer
(25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Recordable disk (BD-RSL/DL)
ISO/IEC CD 30191
Information technology — Digitally recorded media for information interchange and storage — 120 mm Triple Layer
(100,0 Gbytes per disk) and Quadruple Layer (128,0 Gbytes per disk) BD Recordable disk (BD-R TL/QL)
ISO/IEC CD 30192
Information technology — Digitally recorded media for information interchange and storage — 120 mm Single Layer
(25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk (BD-RESL/DL)
ISO/IEC CD 30193
Information technology — Digitally recorded media for information interchange and storage — 120 mm Triple Layer
(100,0 Gbytes per disk) BD Rewritable disk (BD-RE TL)
ISO/IEC CD 24759
Information technology — Security techniques — Test requirements for cryptographic modules
ISO/IEC CD
27036-2
Information technology — Security techniques — Information security for supplier relationships — Part 2: Common
requirements
ISO/IEC CD 27040
Information technology — Security techniques — Storage security
ISO/IEC CD 16480
Information technology — Automatic identification and data capture techniques — Reading and display of ORM by
mobile devices
ISO/IEC CD
30114-2
Information technology — Extensions of Office Open XML — Part 2: Character Repertoire Checking
DIS circulated
Period from 01 July to 31 July 2012
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 4
Rolling bearings
ISO
582:1995/DAmd
1
*
Rolling bearings — Chamfer dimensions — Maximum values — Amendment 1
2012-12-03
ISO/DIS 3290-1
*
Rolling bearings — Balls — Part 1: Steel balls
2012-12-04
(Revision of ISO 3290-1:2008, ISO 3290-1:2008/Cor 1:2009)
ISO/DIS 3290-2
*
Rolling bearings — Balls — Part 2: Ceramic balls
2012-12-04
(Revision of ISO 3290-2:2008)
TC 12
Quantities and units
ISO/DIS 80003-2
*
Physiological quantities and their units — Part 2: Physics
2012-12-17
ISO/DIS 80003-3
*
Physiological quantities and their units — Part 3: Chemistry
2012-12-17
TC 20
ISO/DIS 5859
Aircraft and space vehicles
*
Aerospace series — Graphic symbols for schematic drawings of hydraulic and pneumatic systems
and components
2012-12-05
(Revision of ISO 5859:1991)
ISO/DIS 15887
*
Space data and information transfer systems — Data systems — Lossless data compression
2012-12-03
(Revision of ISO 15887:2000, ISO 15887:2000/Cor 1:2009)
ISO/DIS 17854
*
Space data and information transfer systems — Flexible advanced coding and modulation scheme
for high rate telemetry applications
2012-12-03
ISO/DIS 18381
*
Space data and information transfer systems — Lossless multispectral and hyperspectral image
compression
2012-12-03
ISO/DIS 18382
*
Space data and information transfer systems — Spacecraft onboard interface services — RFIDbased inventory management systems
2012-12-03
TC 22
Road vehicles
ISO/DIS 18541-2
*
Road vehicles — Standardized access to automotive repair and maintenance information (RMI) —
Part 2: Technical requirements
2012-12-27
ISO/DIS 18541-3
*
Road vehicles — Standardized access to automotive repair and maintenance information (RMI) —
Part 3: Functional user interface requirements
2012-12-27
ISO/DIS 18542-2
*
Road vehicles — Standardized repair and maintenance information (RMI) terminology — Part 2:
Standardized process implementation requirements, registration authority
2012-12-27
ISO/DIS 17949
*
Impact test procedures for road vehicles — Seating and positioning procedures for
anthropomorphic test devices — Procedure for the WorldSID 5Oth percentile male side-impact
dummy in front outboard seating positions
2012-12-05
TC 23
ISO/DIS 5721-1
Tractors and machinery for agriculture and forestry
*
Agricultural tractors — Requirements, test procedures and acceptance criteria for the operator's
field of vision — Part 1: Field of vision to the front
(Revision of ISO 5721:1989)
ISO/DIS 5718
*
Harvesting equipment — Blades for agricultural rotary mowers — Requirements
(Revision of ISO 5718:2002)
ISO/DIS 11783-3
*
Tractors and machinery for agriculture and forestry — Serial control and communications data
2012-12-24
network — Part 3: Data link layer
(Revision of ISO 11783-3:2007)
TC 31
ISO
7295:1988/DAmd
1
Tyres, rims and valves
*
TC 34
ISO/DIS 5527
Tyre valves for aircraft — Interchangeability dimensions — Amendment 1
2012-12-24
Food products
*
Cereals — Vocabulary
2012-12-13
(Revision of ISO 5527:1995)
ISO/DIS 20483
*
Cereals and pulses — Determination of the nitrogen content and calculation of the crude protein
content — Kjeldahl method
2012-12-06
(Revision of ISO 20483:2006)
ISO/DIS 3657
*
Animal and vegetable fats and oils — Determination of saponification value
2012-12-20
(Revision of ISO 3657:2002)
ISO/DIS 3961
*
Animal and vegetable fats and oils — Determination of iodine value
2012-12-20
(Revision of ISO 3961:2009)
TC 38
ISO/DIS 2076
Textiles
*
Textiles — Man-made fibres — Generic names
2012-12-20
(Revision of ISO 2076:2010)
TC 42
ISO/DIS 18947
Photography
*
TC 58
ISO/DIS 10297
Imaging materials — Photographic reflection prints — Determination of abrasion resistance of
photographic images
2012-12-05
Gas cylinders
*
Gas cylinders — Cylinder valves — Specification and type testing
2012-12-20
(Revision of ISO 10297:2006)
ISO/DIS 11120.3
*
Gas cylinders — Refillable seamless steel tubes of water capacity between 150 l and 3000 l —
Design construction and testing
2012-09-20
(Revision of ISO 11120:1999)
TC 70
ISO/DIS 4548-15
Internal combustion engines
*
TC 105
ISO/DIS 16841
*
*
2012-12-20
Condition monitoring and diagnostics of machines — Requirements for qualification and
assessment of personnel — Part 8: Ultrasound
2012-12-12
Industrial trucks
*
TC 112
ISO/DIS 2861
Steel wire ropes — Pulling eyes for rope installation — Types and minimum requirements
Mechanical vibration, shock and condition monitoring
TC 110
ISO/DIS 22915-5
2012-12-11
Steel wire ropes
TC 108
ISO/DIS 18436-8
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration
fatigue test with composite materials
Industrial trucks — Verification of stability — Part 5: Single side-loading trucks
Vacuum technology
*
Vacuum technology — Dimensions of clamped-type quick-release couplings
2012-12-12
(Revision of ISO 2861-1:1974)
TC 114
ISO/DIS 3764
Horology
*
Timekeeping instruments — Movements — Types, dimensions and nomenclature
2012-12-07
(Revision of ISO 3764:2000)
TC 126
ISO/DIS 10362-2
Tobacco and tobacco products
*
Cigarettes — Determination of water in smoke condensates — Part 2: Karl Fischer method
2012-12-07
(Revision of ISO 10362-2:1994, ISO 10362-2:1994/Amd 1:2011)
TC 130
ISO/DIS 12640-5
Graphic technology
*
TC 135
ISO/DIS 16946
*
Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block
2012-12-20
Air quality
*
TC 172
ISO/DIS 11979-2
2012-12-05
Non-destructive testing
TC 146
ISO/DIS 12219-5
Graphic technology — Prepress digital data exchange — Part 5: Scene-referred standard colour
image data (RIMM/SCID)
Interior air of road vehicles — Part 5: Screening method for the determination of the emissions of
volatile organic compounds from vehicle interior parts and materials — Static chamber method
2012-12-11
Optics and photonics
*
Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods
2012-12-06
(Revision of ISO 11979-2:1999, ISO 11979-2:1999/Cor 1:2003)
TC 176
ISO/DIS 17582
Quality management and quality assurance
*
TC 193
ISO/DIS 6974-5
Quality management systems for electoral bodies — Requirements
2012-10-21
Natural gas
*
Natural gas — Determination of composition and associated uncertainty by gas chromatography —
Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+
hydrocarbons
2012-12-06
(Revision of ISO 6974-5:2000)
TC 201
ISO/DIS 11505
Surface chemical analysis
*
CASCO
ISO/IEC DIS
17067
Surface chemical analysis — General procedures for quantitative compositional depth profiling by
glow discharge optical emission spectrometry
2012-10-05
Committee on conformity assessment
*
Conformity assessment — Fundamentals of product certification and guidelines for product
certification schemes
2012-12-06
(Revision of ISO/IEC Guide 23:1982, ISO Guide 27:1983, ISO/IEC Guide 67:2004, ISO/IEC Guide
53:2005, ISO/IEC Guide 28:2004)
JTC 1
Information technology
ISO/IEC DIS
7812-1.2
Identification cards — Identification of issuers — Part 1: Numbering system
2012-09-21
(Revision of ISO/IEC 7812-1:2006)
ISO/IEC DIS
7812-2.2
Identification cards — Identification of issuers — Part 2: Application and registration procedures
2012-09-21
(Revision of ISO/IEC 7812-2:2007)
ISO/IEC DIS
7816-4.2
Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for
interchange
2012-09-21
(Revision of ISO/IEC 7816-4:2005, ISO/IEC 7816-4:2005/Amd 1:2008)
ISO/IEC DIS
19775-1
*
Information technology — Computer graphics and image processing — Extensible 3D (X3D) — Part
1: Architecture and base components
2012-12-14
(Revision of ISO/IEC 19775-1:2008)
FDIS circulated
Period from 01 July to 31 July 2012
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 2
ISO/FDIS 4032
Fasteners
*
Hexagon nuts, style 1 — Product grades A and B
2012-10-13
(Revision of ISO 4032:1999)
ISO/FDIS 4033
*
Hexagon nuts, style 2 — Product grades A and B
2012-10-13
(Revision of ISO 4033:1999)
ISO/FDIS 4034
*
Hexagon nuts — Product grade C
2012-10-13
(Revision of ISO 4034:1999)
ISO/FDIS 4035
*
Hexagon thin nuts (chamfered) — Product grades A and B
2012-10-13
(Revision of ISO 4035:1999)
ISO/FDIS 4036
*
Hexagon thin nuts (unchamfered) — Product grade B
2012-10-13
(Revision of ISO 4036:1999)
ISO/FDIS 8673
*
Hexagon nuts, style 1, with metric fine pitch thread — Product grades A and B
2012-10-13
(Revision of ISO 8673:1999)
ISO/FDIS 8674
*
Hexagon nuts, style 2, with metric fine pitch thread — Product grades A and B
2012-10-13
(Revision of ISO 8674:1999)
ISO/FDIS 8675
*
Hexagon thin nuts (chamfered) with metric fine pitch thread — Product grades A and B
2012-10-13
(Revision of ISO 8675:1999)
ISO/FDIS 10513
*
Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread — Property
classes 8, 10 and 12
(Revision of ISO 10513:1997)
TC 6
Paper, board and pulps
2012-10-13
ISO/FDIS 5270
*
Pulps — Laboratory sheets — Determination of physical properties
2012-09-13
(Revision of ISO 5270:1998)
TC 8
ISO/FDIS 3730
Ships and marine technology
*
Shipbuilding and marine structures — Mooring winches
2012-09-26
(Revision of ISO 3730:1988)
TC 22
ISO/FDIS 161211
Road vehicles
*
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part
1: General description, basic requirements
2012-09-21
(Revision of ISO 16121-1:2005)
TC 30
ISO/FDIS 170892
Measurement of fluid flow in closed conduits
*
TC 31
ISO
9413:2012/FDAm
d1
2012-09-10
Tyres, rims and valves
*
TC 35
ISO/FDIS 4628-8
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for
industrial applications
Tyre valves — Dimensions and designation — Amendment 1
2012-09-14
Paints and varnishes
*
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size
of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of
delamination and corrosion around a scribe or other artificial defect
2012-09-06
(Revision of ISO 4628-8:2005)
ISO/FDIS 120131
*
Paints and varnishes — Determination of curing characteristics using a free damped oscillation
method — Part 1: Starting temperature of the curing reaction
2012-09-27
ISO/FDIS 120132
*
Paints and varnishes — Determination of curing characteristics using a free damped oscillation
method — Part 2: Glass transition temperature
2012-09-27
TC 38
ISO
11092:1993/FDA
md 1
Textiles
*
TC 41
ISO/FDIS 251
Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under
steady-state conditions (sweating guarded-hotplate test) — Amendment 1
2012-09-06
Pulleys and belts (including veebelts)
*
Conveyor belts with textile carcass — Widths and lengths
2012-09-19
(Revision of ISO 251:2003)
ISO/FDIS 5285
*
Conveyor belts — Guidelines for storage and handling
2012-09-24
(Revision of ISO 5285:2004)
TC 44
ISO/FDIS 4136
Welding and allied processes
*
Destructive tests on welds in metallic materials — Transverse tensile test
2012-09-13
(Revision of ISO 4136:2001)
ISO/FDIS 9016
*
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch
orientation and examination
2012-10-13
(Revision of ISO 9016:2001)
ISO/FDIS 13588
TC 45
*
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array
technology
Rubber and rubber products
2012-09-06
ISO/FDIS 1382
*
Rubber — Vocabulary
2012-09-14
(Revision of ISO 1382:2008)
ISO/FDIS 12492
*
TC 48
ISO/FDIS 6556
Rubber, raw — Determination of water content by the Karl Fischer method
2012-09-17
Laboratory equipment
*
Laboratory glassware — Filter flasks
2012-09-20
(Revision of ISO 6556:1981)
TC 61
ISO/FDIS 148551
Plastics
*
Determination of the ultimate aerobic biodegradability of plastic materials under controlled
composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General
method
2012-10-13
(Revision of ISO 14855-1:2005)
ISO/FDIS 13636
*
TC 67
ISO/FDIS 135036
Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets
2012-09-19
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
*
TC 71
Petroleum and natural gas industries — Completion fluids and materials — Part 6: Procedure for
measuring leakoff of completion fluids under dynamic conditions
2012-09-27
Concrete, reinforced concrete and pre-stressed concrete
ISO/FDIS 148241
*
Grout for prestressing tendons — Part 1: Basic requirements
ISO/FDIS 148242
*
Grout for prestressing tendons
— Part 2: Grouting procedures
2012-09-12
ISO/FDIS 148243
*
Grout for prestressing tendons
— Part 3: Test methods
2012-09-12
TC 94
ISO/FDIS 174203
Personal safety -- Protective clothing and equipment
*
TC 107
ISO/FDIS 14188
Respiratory protective devices — Performance requirements — Part 3: Thread connection
2012-09-28
Metallic and other inorganic coatings
*
TC 121
ISO/FDIS 5356-2
2012-09-12
Metallic and other inorganic coatings — Test methods for measuring thermal cycle resistance and
thermal shock resistance for thermal barrier coatings
2012-10-01
Anaesthetic and respiratory equipment
*
Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weightbearing connectors
2012-09-27
(Revision of ISO 5356-2:2006)
IEC 60601-18:2006/FDAmd 1
*
TC 122
ISO/FDIS 3676.2
Medical electrical equipment — Part 1-8: General requirements for basic safety and essential
performance — Collateral standard: General requirements, tests and guidance for alarm systems
in medical electrical equipment and medical electrical systems — Amendment 1
2012-09-29
Packaging
*
Packaging — Complete, filled transport packages and unit loads — Unit load dimensions
2012-10-01
(Revision of ISO 3676:1983)
ISO/FDIS 13127
*
TC 123
ISO/FDIS 4383
Packaging — Child resistant packaging — Mechanical test methods for reclosable child resistant
packaging systems
Plain bearings
*
Plain bearings — Multilayer materials for thin-walled plain bearings
(Revision of ISO 4383:2000)
2012-09-13
ISO/FDIS 4384-1
*
Plain bearings — Hardness testing of bearing metals — Part 1: Multilayer bearings materials
2012-09-19
(Revision of ISO 4384-1:2000)
ISO/FDIS 4386-1
*
Plain bearings — Metallic multilayer plain bearings — Part 1: Non-destructive ultrasonic testing of
bond of thickness greater than or equal to 0,5 mm
(Revision of ISO 4386-1:1992)
ISO/FDIS 4386-2
*
Plain bearings — Metallic multilayer plain bearings — Part 2: Destructive testing of bond for
bearing metal layer thicknesses greater than or equal to 2 mm
(Revision of ISO 4386-2:1982)
ISO/FDIS 7148-1
*
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of
bearing metals
2012-09-19
(Revision of ISO 7148-1:1999)
ISO/FDIS 7148-2
*
Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of
polymer-based bearing materials
2012-09-19
(Revision of ISO 7148-2:1999)
TC 138
ISO/FDIS 121761
Plastics pipes, fittings and valves for the transport of fluids
*
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt
fusion
2012-09-06
(Revision of ISO 12176-1:2006)
ISO/FDIS 174671
*
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping
systems jointed by solvent cement — Part 1: General
2012-10-01
(Revision of ISO 15439-1:2007)
ISO/FDIS 174672
*
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping
systems jointed by solvent cement — Part 2: Pipes
2012-10-01
(Revision of ISO 15439-2:2007)
ISO/FDIS 174673
*
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping
systems jointed by solvent cement — Part 3: Fittings
2012-10-01
(Revision of ISO 15439-3:2007)
ISO/FDIS 9080
*
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of
thermoplastics materials in pipe form by extrapolation
2012-09-06
(Revision of ISO 9080:2003)
TC 146
ISO/FDIS 13199
Air quality
*
TC 150
Stationary source emissions — Determination of total volatile organic compounds (TVOCs) in
waste gases from non-combustion processes — Non-dispersive infrared analyser equipped with
catalytic converter
2012-09-27
Implants for surgery
ISO/FDIS 131753
*
Implants for surgery — Calcium phosphates — Part 3: Hydroxyapatite and beta-tricalcium
phosphate bone substitutes
2012-09-26
ISO/FDIS 23317
*
Implants for surgery — In vitro evaluation for apatite-forming ability of implant materials
2012-09-18
(Revision of ISO 23317:2007)
TC 163
Thermal performance and energy use in the built environment
ISO/FDIS 12631
*
Thermal performance of curtain walling — Calculation of thermal transmittance
2012-09-06
ISO/FDIS 125751.3
*
Thermal insulation products — Exterior insulating systems for foundations — Part 1: Material
specification
2012-09-21
TC 172
Optics and photonics
ISO/FDIS 9394
*
Ophthalmic optics — Contact lenses and contact lens care products — Determination of
biocompatibility by ocular study with rabbit eyes
2012-09-20
(Revision of ISO 9394:1998)
ISO/FDIS 11980
*
Ophthalmic optics — Contact lenses and contact lens care products — Guidance for clinical
investigations
2012-09-27
(Revision of ISO 11980:2009)
TC 188
ISO/FDIS 13297
Small craft
*
Small craft — Electrical systems — Alternating current installations
2012-09-13
(Revision of ISO 13297:2000)
TC 199
ISO/FDIS 138492
Safety of machinery
*
Safety of machinery — Safety-related parts of control systems — Part 2: Validation
2012-09-20
(Revision of ISO 13849-2:2003)
TC 216
ISO/FDIS 16177
Footwear
*
IULTCS
ISO/FDIS 20433
Footwear — Resistance to crack initiation and growth — Belt flex method
2012-09-13
International Union of Leather Technologists and Chemists Societies
*
Leather — Tests for colour fastness — Colour fastness to crocking
2012-09-13
(Revision of ISO 20433:2005)
JTC 1
ISO/IEC FDIS
25021
Information technology
*
Systems and software engineering — Systems and software Quality Requirements and
Evaluation (SQuaRE) — Quality measure elements
2012-09-24
(Revision of ISO/IEC TR 25021:2007)
ISO/IEC FDIS
27013
*
Information technology — Security techniques — Guidelines on the integrated implementation of
ISO/IEC 27001 and ISO/IEC 20000-1
2012-09-24
ISO/IEC FDIS
27037
*
Information technology — Security techniques — Guidelines for identification, collection,
acquisition and preservation of digital evidence
2012-09-24
ISO/IEC 159385:2003/FDAmd 4
*
Information technology — Multimedia content description interface — Part 5: Multimedia
description schemes — Amendment 4: Social metadata
2012-09-17
ISO/IEC 230032:2010/FDAmd 1
*
Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding
(SAOC) — Amendment 1: SAOC conformance
2012-09-19
ISO/IEC 230032:2010/FDAmd 2
*
Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding
(SAOC) — Amendment 2: SAOC reference software
2012-09-19
ISO/IEC FDIS
23007-2
*
Information technology — Rich media user interfaces — Part 2: Advanced user interaction (AUI)
interfaces
2012-09-19
ISO/IEC FDIS
29174-1
*
Information technology — UII scheme and encoding format for Mobile AIDC services — Part 1:
Identifier scheme for multimedia information access triggered by tag-based identification
2012-09-18
(Revision of ISO/IEC CD 29174)
ISO/IEC FDIS
2382-37
*
Information technology — Vocabulary — Part 37: Harmonized biometric vocabulary
ISO/IEC FDIS
17826
*
Information technology — Cloud Data Management Interface (CDMI)
2012-09-14
Standards published
New International Standards published between 01 July and 31 July 2012
* Available in English only
** French version of standard previously published in English only
Price group
TC 2
ISO 15072:2012
Fasteners
*
Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A
TC 6
Paper, board and pulps
ISO 536:2012
Paper and board — Determination of grammage
TC 8
Ships and marine technology
E
C
ISO/PAS 280042:2012
*
Security management systems for the supply chain — Guidelines for the implementation of ISO 28000 —
Part 2: Guidelines for adopting ISO 28000 for use in medium and small seaport operations
K
ISO/PAS 280043:2012
*
Security management systems for the supply chain — Guidelines for the implementation of ISO 28000 —
Part 3: Additional specific guidance for adopting ISO 28000 for use by medium and small businesses
(other than marine ports)
H
ISO/PAS 280044:2012
*
Security management systems for the supply chain — Guidelines for the implementation of ISO 28000 —
Part 4: Additional specific guidance on implementing ISO 28000 if compliance with ISO 28001 is a
management objective
D
ISO 30004:2012
*
Ships and marine technology — Ship recycling management systems — Guidelines for the
implementation of ISO 30000
R
ISO 13073-1:2012
*
Ships and marine technology - Risk assessment on anti-fouling systems on ships — Part 1: Marine
environmental risk assessment method of biocidally active substances used for anti-fouling systems on
ships
T
ISO/IEC/IEEE
80005-1:2012
*
Utility connections in port — Part 1: High Voltage Shore Connection (HVSC) Systems — General
requirements
ISO 11336-1:2012
*
Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design
criteria, materials, framing and testing of independent glazed openings
TC 10
*
Technical product documentation — Vocabulary — Terms relating to technical drawings, product
definition and related documentation
ISO/TS 813463:2012
*
Industrial systems, installations and equipment and industrial products — Structuring principles and
reference designations — Part 3: Application rules for a reference designation system
TC 17
XA
T
Steel
*
TC 20
ISO 22641:2012
T
Technical product documentation
ISO 10209:2012
ISO 5001:2012
BC
Cold-reduced carbon steel sheet for vitreous enamelling
E
Aircraft and space vehicles
*
Space data and information transfer systems — TM (telemetry) synchronization and channel coding
X
ISO/TS
16697:2012
*
Space systems — Safety and compatibility of materials - Method to determine the flammability thresholds
of materials
D
ISO 26900:2012
*
Space data and information transfer systems — Orbit data messages
V
TC 21
ISO 7202:2012
Equipment for fire protection and fire fighting
*
TC 22
Fire protection — Fire extinguishing media — Powder
L
Road vehicles
ISO 8820-8:2012
*
Road vehicles — Fuse-links — Part 8: Fuse-links with bolt-in contacts (Type H and J) with rated voltage
of 450 V
F
ISO 26262-10:2012
*
Road vehicles — Functional safety — Part 10: Guideline on ISO 26262
X
ISO 23274-2:2012
*
Hybrid-electric road vehicles — Exhaust emissions and fuel consumption measurements — Part 2:
Externally chargeable vehicles
Q
ISO 132321:2005/Amd 1:2012
*
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices
fitted to motorcycles — Part 1: Definitions, symbols and general considerations — Amendment 1: MATD
test helmet, ground impact, and injury costs
XZ
ISO 132323:2005/Amd 1:2012
*
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices
fitted to motorcycles — Part 3: Motorcyclist anthropometric impact dummy — Amendment 1: MATD test
helmet
XZ
ISO 132325:2005/Amd 1:2012
*
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices
fitted to motorcycles — Part 5: Injury indices and risk/benefit analysis — Amendment 1: Ground impact
and injury costs
ISO 132326:2005/Amd 1:2012
*
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices
fitted to motorcycles — Part 6: Full-scale impact-test procedures — Amendment 1: MATD test helmet
XZ
ISO 132327:2005/Amd 1:2012
*
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices
fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of
motorcycle impact tests — Amendment 1: Ground impact
XZ
ISO 132328:2005/Amd 1:2012
*
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices
fitted to motorcycles — Part 8: Documentation and reports — Amendment 1: Ground impact and injury
costs
XZ
L
TC 23
Tractors and machinery for agriculture and forestry
ISO
6534:2007/Amd
1:2012
Forestry machinery — Portable chain-saw hand-guards — Mechanical strength — Amendment 1
XZ
ISO
7914:2002/Amd
1:2012
Forestry machinery — Portable chain-saws — Minimum handle clearance and sizes — Amendment 1
XZ
TC 28
Petroleum products and lubricants
ISO 4404-1:2012
Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic
fluids — Part 1: Water-containing fluids
TC 29
Small tools
ISO 10649-5:2012
Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with
polygonal taper interface with flange contact surface
C
ISO 10649-6:2012
Cutter arbors with parallel key and tenon drive — Part 6: Dimensions and designation of tool holders with
modular taper interface with ball track system
C
TC 30
Measurement of fluid flow in closed conduits
ISO 12242:2012
*
TC 31
ISO/TR
Measurement of fluid flow in closed conduits — Ultrasonic transit-time meters for liquid
H
V
Tyres, rims and valves
*
Further clarification of ISO 28580
B
16377:2012
TC 33
ISO 1927-1:2012
Refractories
*
Monolithic (unshaped) refractory products — Part 1: Introduction and classification
E
TC 34
Food products
ISO 11747:2012
Rice — Determination of rice kernel resistance to extrusion after cooking
ISO 92331:2007/Amd 1:2012
Cheese, cheese rind and processed cheese — Determination of natamycin content — Part 1: Molecular
absorption spectrometric method for cheese rind — Amendment 1
XZ
ISO 92332:2007/Amd 1:2012
Cheese, cheese rind and processed cheese — Determination of natamycin content — Part 2: Highperformance liquid chromatographic method for cheese, cheese rind and processed cheese —
Amendment 1
XZ
ISO 15163:2012
Milk and milk products — Calf rennet and adult bovine rennet — Determination by chromatography of
chymosin and bovine pepsin contents
K
ISO/TS
22113:2012
Milk and milk products — Determination of the titratable acidity of milk fat
G
T
ISO 6498:2012
*
Animal feeding stuffs — Guidelines for sample preparation
ISO/TS
21033:2011/Amd
1:2012
*
Animal and vegetable fats and oils — Determination of trace elements by inductively coupled plasma
optical emission spectroscopy (ICP-OES) — Amendment 1
E
XZ
TC 35
Paints and varnishes
ISO 2812-3:2012
Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent
medium
D
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 6:
Determination of tralopyril release rate by quantitation of its degradation product in the extract
G
ISO 15181-6:2012
*
TC 38
Textiles
ISO 1140:2012
Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes
D
ISO 1141:2012
Fibre ropes — Polyester — 3-, 4-, 8- and 12-strand ropes
D
ISO 1346:2012
Fibre ropes — Polypropylene split film, monofilament and multifilament (PP2) and polypropylene hightenacity multifilament (PP3) — 3-, 4-, 8- and 12-strand ropes
D
TC 42
Photography
ISO/TS 220283:2012
*
Photography and graphic technology — Extended colour encodings for digital image storage,
manipulation and interchange — Part 3: Reference input medium metric RGB colour image encoding
(RIMM RGB)
K
TC 43
Acoustics
ISO 10140-1:2010
Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application
rules for specific products
P
ISO 10140-2:2010
Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of
airborne sound insulation
G
ISO 10140-3:2010
Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of
impact sound insulation
F
ISO 10140-4:2010
Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement
procedures and requirements
F
ISO 10140-5:2010
Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements
for test facilities and equipment
Q
TC 44
Welding and allied processes
ISO
Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications and tests —
XZ
5172:2006/Amd
1:2012
Amendment 1
ISO/TS 150116:2012
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases —
Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding
K
ISO 9606-1:2012
Qualification testing of welders — Fusion welding — Part 1: Steels
Q
TC 45
Rubber and rubber products
ISO 3387:2012
Rubber — Determination of crystallization effects by hardness measurements
E
ISO 99242:2000/Amd 1:2012
*
Rubber and rubber products — Determination of the composition of vulcanizates and uncured
compounds by thermogravimetry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers — Amendment
1
XZ
ISO 4656:2012
*
Rubber compounding ingredients — Carbon black — Determination of oil absorption number (OAN) and
oil absorption number of compressed sample (COAN)
J
TC 54
Essential oils
ISO 212:2007/Amd
1:2012
Essential oils — Sampling — Amendment 1
ISO 3517:2012
Essential oil of neroli (Citrus aurantium L., syn. Citrus amara Link, syn. Citrus bigaradia Loisel, syn. Citrus
vulgaris Risso)
TC 58
Gas cylinders
XZ
E
ISO 11119-1:2012
*
Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part
1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
N
ISO 11119-2:2012
*
Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part
2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal
liners
P
TC 59
ISO 6927:2012
Buildings and civil engineering works
*
TC 61
Buildings and civil engineering works — Sealants — Vocabulary
L
Plastics
ISO 16014-1:2012
*
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using
size-exclusion chromatography — Part 1: General principles
J
ISO 16014-2:2012
*
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using
size-exclusion chromatography — Part 2: Universal calibration method
F
ISO 16014-3:2012
*
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using
size-exclusion chromatography — Part 3: Low-temperature method
J
ISO 16014-4:2012
*
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using
size-exclusion chromatography — Part 4: High-temperature method
G
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using
size-exclusion chromatography — Part 5: Method using light-scattering detection
M
Rigid cellular plastics — Determination of shear strength
C
ISO 3673-2:2012
Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of
crosslinked epoxy resins
C
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries
ISO 13501:2011
Petroleum and natural gas industries — Drilling fluids — Processing equipment evaluation
ISO 10407-2:2008
Petroleum and natural gas industries — Rotary drilling equipment — Part 2: Inspection and classification
of used drill stem elements
ISO 16014-5:2012
ISO 1922:2012
*
U
XC
ISO 12211:2012
*
Petroleum, petrochemical and natural gas industries — Spiral plate heat exchangers
R
ISO 12212:2012
*
Petroleum, petrochemical and natural gas industries — Hairpin-type heat exchangers
S
ISO 25457:2008
ISO 19905-1:2012
*
TC 69
ISO/TR
13587:2012
Petroleum, petrochemical and natural gas industries — Flare details for general refinery and
petrochemical service
XC
Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 1:
Jack-ups
XC
Applications of statistical methods
*
TC 79
Three statistical approaches for the assessment and interpretation of measurement uncertainty
S
Light metals and their alloys
ISO 6363-1:2012
*
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1: Technical
conditions for inspection and delivery
G
ISO 6363-2:2012
*
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars and tubes and wires — Part 2:
Mechanical properties
J
ISO 6363-3:2012
*
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 3: Drawn
round bars and wires — Tolerances on form and dimensions (symmetric plus and minus tolerances on
diameter)
B
ISO 6363-4:2012
*
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 4: Drawn
rectangular bars and wires — Tolerances on form and dimensions
D
ISO 6363-5:2012
*
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 5: Drawn
square and hexagonal bars and wires — Tolerances on form and dimensions
C
ISO 6363-6:2012
*
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 6: Drawn
round tubes — Tolerances on form and dimensions
D
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 11665-1:2012
Measurement of radioactivity in the environment — Air: radon-222 — Part 1: Origins of radon and its
short-lived decay products and associated measurement methods
P
ISO 11665-2:2012
Measurement of radioactivity in the environment — Air: radon-222 — Part 2: Integrated measurement
method for determining average potential alpha energy concentration of its short-lived decay products
G
ISO 11665-3:2012
Measurement of radioactivity in the environment — Air: radon-222 — Part 3: Spot measurement method
of the potential alpha energy concentration of its short-lived decay products
K
ISO 11665-4:2012
Measurement of radioactivity in the environment — Air: radon-222 — Part 4: Integrated measurement
method for determining average activity concentration using passive sampling and delayed analysis
N
ISO 11665-5:2012
Measurement of radioactivity in the environment — Air: radon-222 — Part 5: Continuous measurement
method of the activity concentration
G
ISO 11665-6:2012
Measurement of radioactivity in the environment — Air: radon-222 — Part 6: Spot measurement method
of the activity concentration
G
ISO 11665-7:2012
Measurement of radioactivity in the environment — Air: radon-222 — Part 7: Accumulation method for
estimating surface exhalation rate
L
TC 92
Fire safety
ISO 11925-2:2010
Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Singleflame source test
ISO/TR 102953:2012
*
Fire tests for building elements and components — Fire testing of service installations — Part 3: Single
component penetration seals — Guidance on the construction and use of test configurations and
simulated services to characterise sealing materials
TC 106
Dentistry
ISO 13017:2012
Dentistry — Magnetic attachments
M
J
E
ISO 13504:2012
Dentistry — General requirements for instruments and related accessories used in dental implant
placement and treatment
TC 107
Metallic and other inorganic coatings
ISO 12671:2012
*
TC 108
ISO 21940-21:2012
D
Mechanical vibration, shock and condition monitoring
*
TC 112
ISO 14291:2012
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
H
Mechanical vibration — Rotor balancing — Part 21: Description and evaluation of balancing machines
U
Vacuum technology
*
TC 113
Vacuum gauges — Definitions and specifications for quadrupole mass spectrometers
G
Hydrometry
ISO 4377:2012
*
Hydrometric determinations — Flow measurement in open channels using structures — Flat-V weirs
U
ISO 6421:2012
*
Hydrometry — Methods for assessment of reservoir sedimentation
S
TC 114
Horology
ISO 13074:2012
Analogue quartz clocks — Fitting dimensions of movements to hands
TC 115
Pumps
B
ISO 17769-1:2012
*
Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 1:
Liquid pumps
XD
ISO 17769-2:2012
*
Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 2:
Pumping system
N
TC 118
Compressors and pneumatic tools, machines and equipment
ISO
20643:2005/Amd
1:2012
Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration
emission — Amendment 1: Accelerometer positions
TC 119
Powder metallurgy
ISO 13944:2012
Lubricated metal-powder mixes — Determination of lubricant content — Soxhlet extraction method
TC 123
Plain bearings
ISO 13939:2012
*
Foil bearings — Guidelines for testing of the performance of foil journal bearings --Testing of load
capacity, friction coefficient and lifetime
XZ
B
H
TC 127
Earth-moving machinery
ISO 13459:2012
Earth-moving machinery — Trainer seat — Deflection limiting volume, space envelope and performance
requirements
TC 131
Fluid power systems
ISO 6953-3:2012
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 3: Alternative
test methods for measuring the flow-rate characteristics of pressure regulators
S
Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation
codes — Technical Corrigendum 1
free
ISO 36011:2012/Cor 1:2012
*
E
TC 146
Air quality
ISO 12219-1:2012
Interior air of road vehicles — Part 1: Whole vehicle test chamber — Specification and method for the
determination of volatile organic compounds in cabin interiors
L
Indoor air — Part 26: Sampling strategy for carbon dioxide (CO2)
G
ISO 16000-26:2012
TC 147
*
Water quality
ISO 14403-1:2012
Water quality — Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) —
Part 1: Method using flow injection analysis (FIA)
G
ISO 14403-2:2012
Water quality — Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) —
Part 2: Method using continuous flow analysis (CFA)
L
ISO 13160:2012
Water quality — Strontium 90 and strontium 89 — Test methods using liquid scintillation counting or
proportional counting
R
TC 150
Implants for surgery
ISO 5832-2:1999
Implants for surgery — Metallic materials — Part 2: Unalloyed titanium
B
Active implantable medical devices — Electromagnetic compatibility — EMC test protocols for
implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization
devices
X
ISO 14117:2012
*
TC 156
Corrosion of metals and alloys
ISO 14802:2012
Corrosion of metals and alloys — Guidelines for applying statistics to analysis of corrosion data
TC 163
Thermal performance and energy use in the built environment
ISO 18393-1:2012
Thermal insulation products — Determination of ageing by settlement — Part 1: Blown loose-fill insulation
for ventilated attics
ISO 100772:2012/Cor 1:2012
*
Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2:
Numerical method for frames — Technical Corrigendum 1
ISO 13792:2012
Thermal performance of buildings — Calculation of internal temperatures of a room in summer without
mechanical cooling — Simplified methods
TC 164
Mechanical testing of metals
U
B
free
U
ISO 4965-1:2012
*
Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 1: Testing systems
G
ISO 4965-2:2012
*
Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 2: Dynamic calibration
device (DCD) instrumentation
E
TC 171
ISO 14289-1:2012
Document management applications
*
TC 172
Document management applications — Electronic document file format enhancement for accessibility —
Part 1: Use of ISO 32000-1 (PDF/UA-1)
H
Optics and photonics
Endoscopes — Medical endoscopes and endotherapy devices — Part 7: Basic requirements for medical
endoscopes of water-resistant type
A
ISO 11987:2012
Ophthalmic optics — Contact lenses — Determination of shelf-life
C
TC 184
Automation systems and integration
ISO 8600-7:2012
ISO/PAS
17506:2012
*
*
Industrial automation systems and integration — COLLADA digital asset schema specification for 3D
visualization of industrial data
XC
TC 190
Soil quality
ISO 14238:2012
Soil quality — Biological methods — Determination of nitrogen mineralization and nitrification in soils and
the influence of chemicals on these processes
F
ISO 15685:2012
Soil quality — Determination of potential nitrification and inhibition of nitrification — Rapid test by
ammonium oxidation
F
TC 194
Biological evaluation of medical devices
ISO/TR
15499:2012
TC 195
*
Biological evaluation of medical devices — Guidance on the conduct of biological evaluation within a risk
management process
Building construction machinery and equipment
G
ISO 19432:2012
Building construction machinery and equipment — Portable, hand-held, internal combustion engine driven
cut-off machines — Safety requirements
TC 198
Sterilization of health care products
ISO 13408-7:2012
*
TC 202
Aseptic processing of health care products — Part 7: Alternative processes for medical devices and
combination products
S
K
Microbeam analysis
Microbeam analysis — Selected instrumental performance parameters for the specification and checking
of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
F
ISO 16592:2012
Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of
steels using a calibration curve method
F
TC 204
Intelligent transport systems
ISO 12855:2012
Electronic fee collection — Information exchange between service provision and toll charging
ISO 15632:2012
*
W
ISO 17263:2012
*
Intelligent transport systems — Automatic vehicle and equipment identification — System parameters
F
ISO/TS
24533:2012
*
Intelligent transport systems — Electronic information exchange to facilitate the movement of freight and
its intermodal transfer — Road transport information exchange methodology
V
TC 205
Building environment design
ISO 11855-1:2012
*
Building environment design — Design, dimensioning, installation and control of embedded radiant
heating and cooling systems — Part 1: Definition, symbols, and comfort criteria
N
ISO 11855-4:2012
*
Building environment design — Design, dimensioning, installation and control of embedded radiant
heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling
capacity of Thermo Active Building Systems (TABS)
U
ISO 16484-5:2012
*
Building automation and control systems — Part 5: Data communication protocol
TC 206
XC
Fine ceramics
ISO 14627:2012
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture resistance
of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method
D
ISO 14628:2012
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for rolling contact
fatigue of silicon nitride ceramics at room temperature by balls-on-flat method
F
TC 207
Environmental management
ISO 14045:2012
Environmental management — Eco-efficiency assessment of product systems — Principles,
requirements and guidelines
TC 211
Geographic information/Geomatics
ISO 191441:2009/Cor 1:2012
*
Geographic information — Classification systems — Part 1: Classification system structure — Technical
Corrigendum 1
ISO 19144-2:2012
*
Geographic information - Classification systems — Part 2: Land Cover Meta Language (LCML)
TC 213
Dimensional and geometrical product specifications and verification
ISO 1101:2012
Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation,
location and run-out
TC 215
Health informatics
R
free
XA
XA
ISO/TR
13054:2012
*
Knowledge management of health information standards
G
IEC/TR 80001-21:2012
*
Application of risk management for IT-networks incorporating medical devices — Part 2-1: Step by Step
Risk Management of Medical IT-Networks; Practical Applications and Examples
BC
IEC/TR 80001-22:2012
*
Application of risk management for IT-networks incorporating medical devices — Part 2-2: Guidance for
the communication of medical device security needs, risks and controls
BB
IEC/TR 80001-23:2012
*
Application of risk management for IT-networks incorporating medical devices — Part 2-3: Guidance for
wireless networks
TC 216
Footwear
ISO/TR
16178:2012
Footwear — Critical substances potentially present in footwear and footwear components
TC 218
Timber
ISO 16415:2012
*
TC 219
Non-structural timber grading requirements
BA
S
C
Floor coverings
ISO 4919:2012
*
Carpets — Determination of tuft withdrawal force
B
ISO 6356:2012
*
Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test
J
ISO 10575:2012
*
Resilient floor coverings — Specification for rubber sheet floor coverings with backing
D
ISO 10577:2012
*
Resilient floor coverings — Specification for rubber sheet floor coverings without backing
D
TC 229
Nanotechnologies
ISO/TS
11888:2011
Nanotechnologies — Characterization of multiwall carbon nanotubes — Mesoscopic shape factors
J
ISO/TR
13014:2012
Nanotechnologies — Guidance on physico-chemical characterization of engineered nanoscale materials
for toxicologic assessment
Q
Nanotechnologies — Guidance on physico-chemical characterization of engineered nanoscale materials
for toxicologic assessment — Technical Corrigendum 1
free
ISO/TR
13014:2012/Cor
1:2012
*
CASCO
Committee on conformity assessment
ISO/IEC TS
17022:2012
Conformity assessment — Requirements and recommendations for content of a third-party audit report
on management systems
C
ISO/IEC
17024:2012
Conformity assessment — General requirements for bodies operating certification of persons
L
JTC 1
Information technology
ISO/IEC
17982:2012
*
ISO/IEC 200002:2012
Information technology — Telecommunications and information exchange between systems — Close
Capacitive Coupling Communication Physical Layer (CCCC PHY)
R
Information technology — Service management — Part 2: Guidance on the application of service
management systems
X
ISO/IEC 103736:2011/Amd 3:2012
*
Identification cards — Test methods — Part 6: Proximity cards — Amendment 3: Exchange of additional
parameters, block numbering, unmatched AFI and TR2
XZ
ISO/IEC 144432:2010/Amd 2:2012
*
Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2: Radio frequency
power and signal interface — Amendment 2: Additional PICC classes
XZ
ISO/IEC 180133:2009/Amd 1:2012
*
Information technology — Personal identification — ISO-compliant driving licence — Part 3: Access
control, authentication and integrity validation — Amendment 1: Scanning area identifier — Optional
machine readable zone
XZ
ISO/IEC
9899:2011/Cor
1:2012
*
Information technology — Programming languages — C — Technical Corrigendum 1
ISO/IEC 109671:2012
*
Information technology — Language independent arithmetic — Part 1: Integer and floating point
arithmetic
ISO/IEC 1001:2012
*
Information technology — File structure and labelling of magnetic tapes for information interchange
T
ISO/IEC 150452:2012
*
Information technology — Home Electronic System (HES) gateway — Part 2: Modularity and protocol
P
ISO/IEC 15067-
*
Information technology — Home Electronic System (HES) application model — Part 3: Model of a
Q
free
XB
3:2012
demand-response energy management system for HES
ISO/IEC 180122:2012
*
Information technology — Home Electronic System — Guidelines for product interoperability — Part 2:
Taxonomy and application interoperability model
ISO/IEC 97984:1999/Cor 2:2012
*
Information technology — Security techniques — Entity authentication — Part 4: Mechanisms using a
cryptographic check function — Technical Corrigendum 2
ISO/IEC
27032:2012
*
Information technology — Security techniques — Guidelines for cybersecurity
T
ISO/IEC 270332:2012
*
Information technology — Security techniques — Network security — Part 2: Guidelines for the design
and implementation of network security
N
ISO/IEC TS
29112:2012
*
Information technology — Office equipment — Test charts and methods for measuring monochrome
printer resolution
Q
ISO/IEC TR
29186:2012
*
Information technology — Office equipment — Test method of colour gamut mapping algorithm for office
colour softcopy and hardcopy
F
ISO/IEC 144963:2009/Amd 3:2012
*
Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 3: Transport of
unified speech and audio coding (USAC)
XZ
ISO/IEC 144964:2004/Amd
38:2010/Cor
1:2012
*
Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment
38: Conformance testing for Multiview Video Coding — Technical Corrigendum 1
free
ISO/IEC 144964:2004/Amd
9:2006/Cor 2:2012
*
Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment
9: AVC fidelity range extensions conformance — Technical Corrigendum 2
free
ISO/IEC 144965:2001/Amd
10:2007/Cor
6:2012
*
Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment
10: SSC, DST, ALS and SLS reference software — Technical Corrigendum 6
free
ISO/IEC 1449612:2012
*
Information technology — Coding of audio-visual objects — Part 12: ISO base media file format
ISO/IEC 1449615:2010/Cor
2:2012
*
Information technology — Coding of audio-visual objects — Part 15: Advanced Video Coding (AVC) file
format — Technical Corrigendum 2
ISO/IEC 1544412:2012
*
Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format
ISO/IEC 1800061:2012
*
Information technology — Radio frequency identification for item management — Part 61: Parameters for
air interface communications at 860 MHz to 960 MHz Type A
X
ISO/IEC 1800062:2012
*
Information technology — Radio frequency identification for item management — Part 62: Parameters for
air interface communications at 860 MHz to 960 MHz Type B
V
ISO/IEC 1800064:2012
*
Information technology — Radio frequency identification for item management — Part 64: Parameters for
air interface communications at 860 MHz to 960 MHz Type D
S
ISO/IEC 180463:2012
*
Information technology — Radio frequency identification device performance test methods — Part 3: Test
methods for tag performance
U
ISO/IEC 180476:2012
*
Information technology — Radio frequency identification device conformance test methods — Part 6: Test
methods for air interface communications at 860 MHz to 960 MHz
W
ISO/IEC TR
29162:2012
*
Information technology — Guidelines for using data structures in AIDC media
P
ISO/IEC 197881:2011
Information technology — Learning, education and training — Metadata for learning resources — Part 1:
Framework
U
ISO/IEC 197882:2011
Information technology — Learning, education and training — Metadata for learning resources — Part 2:
Dublin Core elements
K
T
free
XD
free
XD
Standards confirmed
The following International Standards are confimred for a five year period:
TC 2
Fasteners
ISO 8736:1986
(reconfirmed)
TC 23
Tractors and machinery for agriculture and forestry
ISO 21278-2:2008
ISO 22368-1:2004
(reconfirmed)
ISO 22368-2:2004
(reconfirmed)
ISO 22368-3:2004
(reconfirmed)
TC 29
Small tools
ISO 8406:2008
ISO 10069-1:2008
ISO 10069-2:2008
ISO 10071-1:2008
ISO 10242-2:2008
ISO 10242-3:2008
ISO 10907-1:2008
ISO 11900-2:2008
ISO 11903:2008
ISO 1173:2001
(reconfirmed)
TC 34
Food products
ISO 882-1:1993
(reconfirmed)
ISO 882-2:1993
(reconfirmed)
ISO 928:1997
(reconfirmed)
ISO 930:1997
(reconfirmed)
ISO 941:1980
(reconfirmed)
ISO 948:1980
(reconfirmed)
ISO 972:1997
(reconfirmed)
ISO 3513:1995
(reconfirmed)
ISO 5559:1995
(reconfirmed)
ISO 5560:1997
(reconfirmed)
ISO 5561:1990
(reconfirmed)
ISO 5564:1982
(reconfirmed)
ISO 5566:1982
(reconfirmed)
ISO 5567:1982
(reconfirmed)
ISO 6539:1997
(reconfirmed)
ISO 6575:1982
(reconfirmed)
ISO 10620:1995
(reconfirmed)
ISO 10621:1997
(reconfirmed)
ISO 10622:1997
(reconfirmed)
ISO 11162:2001
(reconfirmed)
ISO 11163:1995
(reconfirmed)
ISO 11164:1995
(reconfirmed)
ISO 11165:1995
(reconfirmed)
ISO 13685:1997
(reconfirmed)
ISO/TS 17764-1:2002
(reconfirmed)
ISO/TS 17764-2:2002
(reconfirmed)
ISO 5558:1982
(reconfirmed)
ISO 6321:2002
(reconfirmed)
ISO 6463:1982
(reconfirmed)
ISO 6656:2002
(reconfirmed)
ISO 7847:1987
(reconfirmed)
ISO 8420:2002
(reconfirmed)
ISO 10539:2002
(reconfirmed)
ISO 12193:2004
(reconfirmed)
ISO 19219:2002
(reconfirmed)
ISO 7562:1990
(reconfirmed)
TC 37
Terminology and other language and content resources
ISO 24613:2008
TC 43
Acoustics
ISO 532:1975
(reconfirmed)
TC 44
Welding and allied processes
ISO 857-2:2005
TC 61
Plastics
ISO 5659-1:1996
(reconfirmed)
ISO 3451-1:2008
ISO 3451-2:1998
(reconfirmed)
ISO 3451-4:1998
(reconfirmed)
ISO 3451-5:2002
TC 69
Applications of statistical methods
ISO 11453:1996
(reconfirmed)
ISO 16269-7:2001
(reconfirmed)
ISO 11648-2:2001
(reconfirmed)
TC 92
Fire safety
ISO/TR 11696-2:1999
TC 96
Cranes
ISO 4306-1:2007
ISO 4301-3:1993
(reconfirmed)
TC 107
Metallic and other inorganic coatings
ISO 28722:2008
TC 113
Hydrometry
ISO 8333:1985
(reconfirmed)
TC 115
Pumps
ISO 15783:2002
TC 127
Earth-moving machinery
ISO 13766:2006
TC 130
Graphic technology
ISO 12639:2004
(reconfirmed)
TC 131
Fluid power systems
ISO 10766:2006
TC 136
Furniture
ISO 4211:1979
(reconfirmed)
ISO 4211-4:1988
(reconfirmed)
ISO 5970:1979
(reconfirmed)
ISO 7171:1988
(reconfirmed)
ISO 7175-1:1997
(reconfirmed)
ISO 7175-2:1997
(reconfirmed)
ISO 8191-1:1987
(reconfirmed)
ISO 8191-2:1988
(reconfirmed)
ISO 9098-1:1994
(reconfirmed)
ISO 9098-2:1994
(reconfirmed)
ISO 9221-1:1992
(reconfirmed)
ISO 9221-2:1992
(reconfirmed)
ISO 10131-1:1997
(reconfirmed)
ISO 10131-2:1997
(reconfirmed)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 727-1:2002
(reconfirmed)
ISO 4132:1979
(reconfirmed)
ISO 8796:2004
(reconfirmed)
ISO 9623:1997
(reconfirmed)
ISO 13783:1997
(reconfirmed)
TC 172
Optics and photonics
ISO 8577:1997
(reconfirmed)
ISO 11882:1997
(reconfirmed)
ISO 11883:1997
(reconfirmed)
TC 173
Assistive products for persons with disability
ISO 7176-4:2008
ISO 7176-5:2008
ISO 7176-6:2001
(reconfirmed)
ISO 7176-10:2008
ISO 7176-13:1989
(reconfirmed)
ISO 7176-19:2008
ISO 7176-23:2002
ISO 7176-24:2004
TC 205
Building environment design
ISO 16813:2006
JTC 1
Information technology
ISO/IEC 13673:2000
(reconfirmed)
ISO/IEC 15445:2000
(reconfirmed)
ISO/IEC 19757-4:2006
Standards withdrawn
Period from 01 July to 31 July 2012
TC 8
Ships and marine technology
ISO/PAS 30004:2011
(replaced by ISO 30004:2012)
IEC/PAS 60092-510:2009
(replaced by ISO/IEC/IEEE 80005-1:2012)
TC 10
Technical product documentation
ISO 10209-1:1992
(replaced by ISO 10209:2012)
ISO 10209-2:1993
(replaced by ISO 10209:2012)
ISO 10209-4:1999
(replaced by ISO 10209:2012)
ISO/TS 16952-1:2006
(replaced by ISO/TS 81346-3:2012)
TC 20
Aircraft and space vehicles
ISO 22644:2006
(replaced by ISO 26900:2012)
TC 22
Road vehicles
ISO 23273-1:2006
(replaced by )
ISO 23273-3:2006
(replaced by )
TC 33
Refractories
ISO 1927:1984
(replaced by ISO 1927-1:2012)
TC 79
Light metals and their alloys
ISO 5193:1981
(replaced by ISO 6363-3:2012)
ISO 6365-1:1988
(replaced by ISO 6363-1:2012)
TC 83
Sports and recreational equipment
ISO 5903:1981
(replaced by )
ISO 5904:1981
(replaced by )
ISO 5905:1980
(replaced by )
ISO 5906:1980
(replaced by )
ISO 5907:1980
(replaced by )
TC 108
Mechanical vibration, shock and condition monitoring
ISO 2953:1999
(replaced by ISO 21940-21:2012)
ISO 3719:1994
(replaced by )
TC 115
Pumps
ISO 17769:2008
(replaced by ISO 17769-1:2012)
TC 147
Water quality
ISO 14403:2002
(replaced by ISO 14403-2:2012)
TC 164
Mechanical testing of metals
ISO 4965:1979
(replaced by ISO 4965-1:2012, ISO 4965-2:2012)
TC 173
Assistive products for persons with disability
ISO 7193:1985
(replaced by )
TC 204
Intelligent transport systems
ISO/TS 17263:2003
(replaced by ISO 17263:2012)
JTC 1
Information technology
ISO/IEC TR 15067-3:2000
(replaced by ISO/IEC 15067-3:2012)
ISO/IEC 18028-2:2006
(replaced by ISO/IEC 27033-2:2012)
ISO/IEC TR 18047-6:2011
(replaced by ISO/IEC 18047-6:2012)
Meeting calendar
(update at 01 July 2012)
Meetings called for the month of June are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
September 2012
3-6
Stockholm
(Sweden)
TC 110/SC 2
Industrial trucks/Safety of powered industrial trucks
4
La Rochelle
(France)
TC 163/SC 2
Thermal performance and energy use in the built environment/Calculation methods
4-7
Zurich
(Switzerland)
TC 172/SC 5
Optics and photonics/Microscopes and endoscopes
5
La Rochelle
(France)
TC 163/SC 3
Thermal performance and energy use in the built environment/Thermal insulation products
5-7
La Rochelle
(France)
TC 205
Building environment design
6
La Rochelle
(France)
TC 163/SC 1
Thermal performance and energy use in the built environment/Test and measurement methods
6-7
La Rochelle
(France)
TC 163
Thermal performance and energy use in the built environment
7
Zurich
(Switzerland)
TC 142
Cleaning equipment for air and other gases
7-8
Gelendzhik
(Russian
Federation)
TC 20/SC 8
Aircraft and space vehicles/Aerospace terminology
8-14
Busan (Korea,
Republic of)
JTC 1/SC 36
Information technology/Information technology for learning, education and training
10
Milan (Italy)
TC 21/SC 3
Equipment for fire protection and fire fighting/Fire detection and alarm systems
10
Milan (Italy)
TC 21/SC 5
Equipment for fire protection and fire fighting/Fixed firefighting systems using water
10
Milan (Italy)
TC 21/SC 6
Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems
using foam and powder
10-11
Geneva
(Switzerland)
JTC 1/SC 22
Information technology/Programming languages, their environments and system software
interfaces
10-11
Milan (Italy)
TC 21/SC 2
Equipment for fire protection and fire fighting/Manually transportable fire extinguishers
10-12
Moscow
(Russian
Federation)
TC 150/SC 1
Implants for surgery/Materials
10-12
Zibo city (China)
TC 206
Fine ceramics
10-12
Zurich
(Switzerland)
TC 209
Cleanrooms and associated controlled environments
10-14
Geneva
(Switzerland)
JTC 1/SC 25
Information technology/Interconnection of information technology equipment
10-14
Nancy (France)
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration
and shock
10-14
Moscow
(Russian
Federation)
TC 150
Implants for surgery
10-14
La Plaine StDenis (France)
TC 153/SC 1
Valves/Design, manufacture, marking and testing
10-14
Helsinki
(Finland)
TC 190
Soil quality
10-14
Sydney
(Australia)
TC 262
Project committee: Risk management
11
Moscow
(Russian
Federation)
TC 150/SC 5
Implants for surgery/Osteosynthesis and spinal devices
11
Moscow
(Russian
Federation)
TC 150/SC 7
Implants for surgery/Tissue-engineered medical products
11-12
Milan (Italy)
TC 21/SC 8
Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas
12
Helsinki
(Finland)
TC 190/SC 1
Soil quality/Evaluation of criteria, terminology and codification
13
Moscow
(Russian
Federation)
TC 150/SC 2
Implants for surgery/Cardiovascular implants and extracorporeal systems
13
Moscow
(Russian
Federation)
TC 150/SC 4
Implants for surgery/Bone and joint replacements
13
Moscow
(Russian
Federation)
TC 150/SC 6
Implants for surgery/Active implants
13
Helsinki
(Finland)
TC 190/SC 4
Soil quality/Biological methods
13
Helsinki
(Finland)
TC 190/SC 7
Soil quality/Soil and site assessment
14
Beijing (China)
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
14
Helsinki
(Finland)
TC 190/SC 2
Soil quality/Sampling
14
Helsinki
(Finland)
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
17-18
San Diego (USA)
TMB
Technical Management Board
17-20
Graz (Austria)
JTC 1/SC 6
Information technology/Telecommunications and information exchange between systems
17-21
Seoul (Korea,
TC 133
Sizing systems and designations for clothes
Republic of)
17-21
Seoul (Korea,
Republic of)
TC 133
Sizing systems and designations for clothes
17-21
Stockholm
(Sweden)
TC 165
Timber structures
18-20
Berlin (Germany)
TC 122
Packaging
19
Barcelona
(Spain)
TC 61/SC 11
Plastics/Products
19
Berlin (Germany)
TC 122/SC 3
Packaging/Performance requirements and tests for means of packaging, packages and unit loads
(as required by ISO/TC 122)
19-20
Rio de Janeiro
(Brazil)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries
19-21
San Diego (USA)
GA
General Assembly
20
Barcelona
(Spain)
TC 61/SC 6
Plastics/Ageing, chemical and environmental resistance
22
San Diego (USA)
COUNCIL
Council
23-25
Melbourne
(Australia)
TC 260
Human resource management
23-26
Vienna (Austria)
TC 215
Health informatics
24-25
Sao Paulo
(Brazil)
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
24-25
Liuyang (China)
TC 264
Fireworks
24-26
Sydney
(Australia)
TC 54
Essential oils
24-28
Stockholm
(Sweden)
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
24-28
Sandviken
(Sweden)
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
24-28
Rotorua (New
Zealand)
TC 218
Timber
25-26
Sao Paulo
(Brazil)
TC 164/SC 2
Mechanical testing of metals/Ductility testing
25-26
Sao Paulo
(Brazil)
TC 164/SC 3
Mechanical testing of metals/Hardness testing
25-27
Sao Paulo
(Brazil)
**
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
25-27
Sao Paulo
(Brazil)
*
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
25-27
Berlin (Germany)
TC 256
Pigments, dyestuffs and extenders
27
Paris (France)
TC 70/SC 8
Internal combustion engines/Exhaust gas emission measurement
27
Sao Paulo
(Brazil)
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
27-28
Paris (France)
TC 58/SC 2
Gas cylinders/Cylinder fittings
28
Paris (France)
TC 70
Internal combustion engines
28
Sao Paulo
TC 164
Mechanical testing of metals
*
*
(Brazil)
28
Madrid (Spain)
TC 213
Dimensional and geometrical product specifications and verification
TC 106
Dentistry
TC 184/SC 1
Automation systems and integration/Physical device control
September-October 2012
30-6
Paris (France)
3rd Quarter 2012
Frankfurt
(Germany)
**
October 2012
1-2
Ottawa (Canada)
TC 34/SC 11
Food products/Animal and vegetable fats and oils
1-5
Vienna (Austria)
TC 247
Fraud countermeasures and controls
3
Ottawa (Canada)
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
3-5
New Orleans
(USA)
JTC 1/SC 17
Information technology/Cards and personal identification
4
Paris (France)
TC 106/SC 9
Dentistry/Dental CAD/CAM systems
4-5
Sierre
(Switzerland)
TC 226
Materials for the production of primary aluminium
5
Berlin (Germany)
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
5
Cambridge
(United
Kingdom)
TC 157
Non-systemic contraceptives and STI barrier prophylactics
6
Chicago (USA)
TC 130
Graphic technology
8
Berlin (Germany)
TC 254
Safety of amusement rides and amusement devices
8-10
Castro Verde
(Portugal)
TC 183
Copper, lead, zinc and nickel ores and concentrates
8-11
Nagoya (Japan)
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
8-12
Concord,
California (USA)
TC 154
Processes, data elements and documents in commerce, industry and administration
8-12
Moscow
(Russian
Federation)
TC 193
Natural gas
9
London (United
Kingdom)
TC 25
Cast irons and pig irons
9-10
Montreal
(Canada)
TC 199
Safety of machinery
11
Berlin (Germany)
TC 167
Steel and aluminium structures
11-12
Bogota
(Colombia)
CASCO
Committee on conformity assessment
11-12
Tokyo (Japan)
TC 119
Powder metallurgy
11-12
Neubiberg
(Germany)
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
12
Yokohama
(Japan)
**
TC 119/SC 3
Powder metallurgy/Sampling and testing methods for sintered metal materials (excluding
hardmetals)
14-18
Tokyo (Japan)
*
TC 10/SC 8
Technical product documentation/Construction documentation
14-19
Tokyo (Japan)
TC 59
Buildings and civil engineering works
14-19
Praia do Forte
(Brazil)
TC 127
Earth-moving machinery
15-16
Sydney
(Australia)
TC 2/SC 7
Fasteners/Reference standards
15-19
Pointe-Claire,
Quebec
(Canada)
TC 6
Paper, board and pulps
15-19
Riccione (Italy)
TC 45
Rubber and rubber products
15-19
Riccione (Italy)
TC 45/SC 1
Rubber and rubber products/Hoses (rubber and plastics)
15-19
Riccione (Italy)
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
15-19
Amsterdam
(Netherlands)
TC 146
Air quality
15-19
Moscow
(Russian
Federation)
TC 204
Intelligent transport systems
16-19
Foulayronnes
(France)
TC 70/SC 7
Internal combustion engines/Tests for lubricating oil filters
17
Sydney
(Australia)
TC 2/SC 14
Fasteners/Surface coatings
17
Jeju (Korea,
Republic of)
TC 17/SC 7
Steel/Methods of testing (other than mechanical tests and chemical analysis)
17
Berlin (Germany)
TC 22/SC 9
Road vehicles/Vehicle dynamics and road-holding ability
17
Berlin (Germany)
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing
conditions
17-19
Guilin (China)
TC 202
Microbeam analysis
18
Sydney
(Australia)
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
18
Riccione (Italy)
TC 45/SC 2
Rubber and rubber products/Testing and analysis
18
Berlin (Germany)
TC 83
Sports and recreational equipment
18
Berlin (Germany)
TC 123/SC 6
Plain bearings/Terms and common items
18-19
Jeju (Korea,
Republic of)
TC 17
Steel
18-19
Beijing (China)
TC 263
Coalbed methane (CBM)
18-20
Los Angeles
(USA)
TC 36
Cinematography
19
Sydney
(Australia)
TC 2
Fasteners
19
Sydney
(Australia)
TC 2/SC 11
Fasteners/Fasteners with metric external thread
19
Agen (France)
TC 22/SC 5
Road vehicles/Engine tests
19
Agen (France)
TC 22/SC 7
Road vehicles/Injection equipment and filters for use on road vehicles
19
Riccione (Italy)
TC 45/SC 3
Rubber and rubber products/Raw materials (including latex) for use in the rubber industry
*
19
Berlin (Germany)
TC 123
Plain bearings
19
Berlin (Germany)
TC 123/SC 7
Plain bearings/Special types of plain bearings
21-26
Sapporo (Japan)
TC 92
Fire safety
21-26
Sapporo (Japan)
TC 92/SC 2
Fire safety/Fire containment
22
Messina (Italy)
TC 8/SC 7
Ships and marine technology/Inland navigation vessels
22-23
Beijing (China)
TC 255
Biogas
22-26
Rome (Italy)
JTC 1/SC 27
Information technology/IT Security techniques
22-26
Messina (Italy)
TC 8
Ships and marine technology
22-26
Tokyo (Japan)
TC 181
Safety of toys
22-26
Florianopolis
(Brazil)
TC 217
Cosmetics
22-27
Jeju (Korea,
Republic of)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
23
Sydney
(Australia)
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
and drainage (including land drainage)
23-25
Arlington (USA)
TC 58/SC 3
Gas cylinders/Cylinder design
23-26
St. Gallen
(Switzerland)
TC 172/SC 1
Optics and photonics/Fundamental standards
24
Milan (Italy)
TC 12
Quantities and units
24
Sydney
(Australia)
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
supplies
24
Sydney
(Australia)
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply
of gaseous fuels
24-26
Boston (USA)
TC 159/SC 3
Ergonomics/Anthropometry and biomechanics
25
Sydney
(Australia)
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial
applications
25
Sydney
(Australia)
TC 138/SC 5
Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and
valves of plastic materials and their accessories -- Test methods and basic specifications
25
Sydney
(Australia)
TC 138/SC 6
Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for
all applications
25
Sydney
(Australia)
TC 138/SC 7
Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of
plastics materials
25
Madrid (Spain)
TC 216
Footwear
25-26
Arlington (USA)
TC 58
Gas cylinders
25-26
Tampa, Florida
(USA)
TC 112
Vacuum technology
25-27
Tampa, Florida
(USA)
TC 201
Surface chemical analysis
26
Chiangmai
(Thailand)
JTC 1/SC 2
Information technology/Coded character sets
26
Sydney
(Australia)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
30-31
Berlin (Germany)
TC 269
Railway applications
*
31
La Plaine StDenis (France)
TC 79/SC 11
Light metals and their alloys/Titanium
October-November 2012
29-1
Saitama (Japan)
TC 34/SC 17
Food products/Management systems for food safety
30-2
Berlin (Germany)
TC 20/SC 10
Aircraft and space vehicles/Aerospace fluid systems and components
31-7
Orlando (USA)
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
*
November 2012
1-2
London (United
Kingdom)
TC 121/SC 8
Anaesthetic and respiratory equipment/Suction devices for hospital and emergency care use
3
San Diego (USA)
TC 118/SC 6
Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air
systems
5-8
Warsaw (Poland)
TC 98
Bases for design of structures
5-10
Jeju (Korea,
Republic of)
JTC 1
Information technology
6
Milan (Italy)
TC 31/SC 6
Tyres, rims and valves/Off-the-road tyres and rims
6-8
Tokyo (Japan)
TC 17/SC 1
Steel/Methods of determination of chemical composition
6-8
Reykjavik
(Iceland)
TC 234
Fisheries and aquaculture
7
Milan (Italy)
TC 31/SC 7
Tyres, rims and valves/Industrial tyres and rims
8-9
Milan (Italy)
TC 31/SC 5
Tyres, rims and valves/Agricultural tyres and rims
9
Lyon (France)
TC 94/SC 3
Personal safety -- Protective clothing and equipment/Foot protection
10-17
St. Petersburg
(Russian
Federation)
TC 176
Quality management and quality assurance
11-16
Florida (USA)
*
TC 184/SC 4
Automation systems and integration/Industrial data
12-16
Kyoto (Japan)
*
TC 244
Industrial furnaces and associated processing equipment
16
Atlanta (USA)
*
TC 17/SC 12
Steel/Continuous mill flat rolled products
16
Xian (China)
TC 227
Springs
26-27
Tokyo (Japan)
TC 24/SC 4
Particle characterization including sieving/Particle characterization
26-27
London (United
Kingdom)
*
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
26-30
Florianopolis
(Brazil)
*
TC 43
Acoustics
26-30
Florianopolis
(Brazil)
*
TC 43/SC 1
Acoustics/Noise
27-29
Washington, D.C
(USA)
*
TC 20
Aircraft and space vehicles
28-29
London (United
Kingdom)
TC 259
Project committee: Outsourcing
*
*
*
Wiesbaden
(Germany)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and completion fluids, and well cements
(Mexico)
**
TC 229
Nanotechnologies
December 2012
3-4
London (United
Kingdom)
**
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
3-7
(Kenya)
**
TC 223
Societal security
5
Rome (Italy)
TC 147/SC 3
Water quality/Radioactivity measurements
11-12
Jeddah (Saudi
Arabia)
*
TC 211
Geographic information/Geomatics
13-14
Bangkok
(Thailand)
**
TC 221
Geosynthetics
January 2013
7-12
London (United
Kingdom)
*
TC 121/SC 3
Anaesthetic and respiratory equipment/Lung ventilators and related equipment
15-16
Troy (USA)
*
TC 22/SC 11
Road vehicles/Safety glazing materials
23-24
Rio de Janeiro
(Brazil)
**
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Offshore structures
23-25
London (United
Kingdom)
*
TC 69/SC 7
Applications of statistical methods/Applications of statistical and related techniques for the
implementation of Six Sigma
(Unknown)
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
(Australia)
**
TC 248
Project committee: Sustainability criteria for bioenergy
February 2013
4-8
St. Gallen
(Switzerland)
*
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
4-9
London (United
Kingdom)
*
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
**
JTC 1/SC 35
Information technology/User interfaces
February-March 2013
25-1
(Korea, Republic
of)
March 2013
19-22
Jeju (Korea,
Republic of)
*
TC 107
Metallic and other inorganic coatings
27-28
Geneva
(Switzerland)
*
COUNCIL
Council
(Europe)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
April 2013
8-11
Helsinki
(Finland)
*
TC 117
Fans
8-12
Madrid (Spain)
*
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
17-18
Xian (China)
*
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Pipeline transportation systems
22-26
Berlin (Germany)
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of
machines
23-24
Dresden
(Germany)
**
TC 219
Floor coverings
Paris (France)
**
TC 29/SC 5
Small tools/Grinding wheels and abrasives
Salzburg
**
TC 89
Wood-based panels
(Austria)
Shenzen (China)
**
TC 130
Graphic technology
(USA)
**
TC 178
Lifts, escalators and moving walks
(South Africa)
**
TC 242
Energy Management
TC 251
Project committee: Asset management
April-May 2013
29-3
Calgary
(Canada)
May 2013
13-16
Chicago (USA)
**
TC 195/SC 1
Building construction machinery and equipment/Machinery and equipment for concrete work
13-17
(Italy)
**
TC 29
Small tools
13-17
(Italy)
**
TC 29/SC 8
Small tools/Tools for pressing and moulding
13-17
Guangzhou
(China)
*
TC 68
Financial services
13-17
Guangzhou
(China)
*
TC 68/SC 2
Financial services/Financial Services, security
13-17
Guangzhou
(China)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
13-17
Tokyo (Japan)
**
TC 114
Horology
13-17
Chicago (USA)
**
TC 195
Building construction machinery and equipment
20-23
Durban (South
Africa)
*
TC 249
Traditional chinese medicine
21-24
Berlin (Germany)
TC 43/SC 3
Acoustics/Underwater acoustics
22-24
Stockholm
(Sweden)
**
TC 145
Graphical symbols
27-31
Shanghai
(China)
*
TC 4
Rolling bearings
(China)
**
TC 10
Technical product documentation
Paris (France)
**
TC 46/SC 11
Information and documentation/Archives/records management
(Unknown)
**
TC 158
Analysis of gases
June 2013
3-4
Berlin (Germany)
**
TC 44/SC 3
Welding and allied processes/Welding consumables
3-6
Milan (Italy)
*
TC 22/SC 13
Road vehicles/Ergonomics applicable to road vehicles
3-7
Washington, D.C
(USA)
*
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
3-8
Warsaw (Poland) *
TC 96
Cranes
5
Prague (Czech
Republic)
**
TC 115
Pumps
6
Berlin (Germany)
*
TC 44/SC 7
Welding and allied processes/Representation and terms
6-7
Milan (Italy)
*
TC 22/SC 17
Road vehicles/Visibility
9-15
Groenkloof
(South Africa)
*
TC 37
Terminology and other language and content resources
10-14
Sydney
*
REMCO
Committee on reference materials
(Australia)
17-21
Shanghai
(China)
**
TC 121
Anaesthetic and respiratory equipment
19-20
London (United
Kingdom)
**
TC 22/SC 3
Road vehicles/Electrical and electronic equipment
Washington, D.C
(USA)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries/Drilling and completion fluids, and well cements
Paris (France)
**
TC 86/SC 6
Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
(Germany)
**
TC 180
Solar energy
**
TC 34/SC 4
Food products/Cereals and pulses
**
JTC 1/SC 35
Information technology/User interfaces
2nd Quarter 2013
(Canada)
August 2013
26-30
(Canada)
September 2013
18-20
St. Petersburg
(Russian
Federation)
*
GA
General Assembly
21
St. Petersburg
(Russian
Federation)
*
COUNCIL
Council
Paris (France)
**
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
(Unknown)
**
TC 21
Equipment for fire protection and fire fighting
Victoria
(Canada)
**
TC 33
Refractories
(Korea, Republic
of)
**
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing
conditions
(Korea, Republic
of)
**
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
(Korea, Republic
of)
**
TC 123/SC 5
Plain bearings/Quality analysis and assurance
(Korea, Republic
of)
**
TC 123/SC 6
Plain bearings/Terms and common items
(Korea, Republic
of)
**
TC 123/SC 7
Plain bearings/Special types of plain bearings
Tokyo (Japan)
**
TC 142
Cleaning equipment for air and other gases
October 2013
7
Istanbul (Turkey)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
7-11
Istanbul (Turkey)
**
TC 38
Textiles
8
Istanbul (Turkey)
**
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
9
Istanbul (Turkey)
**
TC 38/SC 23
Textiles/Fibres and yarns
10
Istanbul (Turkey)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
11
Garching
(Germany)
**
TC 60
Gears
11
Garching
**
TC 60/SC 1
Gears/Nomenclature and wormgearing
(Germany)
11
Garching
(Germany)
**
TC 60/SC 2
Gears/Gear capacity calculation
14-15
Miami (USA)
**
TC 44/SC 3
Welding and allied processes/Welding consumables
21-26
Berlin (Germany)
*
TC 147
Water quality
Sarajevo (Bosnia
and
Herzegovina)
**
TC 34/SC 12
Food products/Sensory analysis
(France)
**
TC 111/SC 1
Round steel link chains, chain slings, components and accessories/Chains and chain slings
Berlin (Germany)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
Beijing (China)
**
TC 184/SC 2
Automation systems and integration/Robots and robotic devices
(Japan)
**
TC 206
Fine ceramics
November 2013
10
Okinawa (Japan)
**
TC 201
Surface chemical analysis
10-15
Mexico (Mexico)
*
TC 113
Hydrometry
(France)
**
JTC 1
Information technology
(Korea, Republic
of)
**
TC 106
Dentistry
Gaithersburg
(USA)
**
TC 172/SC 9
Optics and photonics/Electro-optical systems
(South Africa)
**
TC 27
Solid mineral fuels
(Unknown)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
(South Africa)
**
TC 44
Welding and allied processes
Porto de
Galinhas (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Norway)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
and drainage (including land drainage)
(Brazil)
**
TC 155
Nickel and nickel alloys
(Sweden)
**
TC 163
Thermal performance and energy use in the built environment
Amsterdam
(Netherlands)
**
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
(Unknown)
**
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
(South Africa)
**
TC 202
Microbeam analysis
(Sweden)
**
TC 205
Building environment design
(Portugal)
**
TC 228
Tourism and related services
(Finland)
**
TC 257
General technical rules for determination of energy savings in renovation projects, industrial
enterprises and regions
4th Quarter 2013
Month unknown 2013
February 2014
(South America)
**
JTC 1/SC 35
Information technology/User interfaces
May 2014
12-16
London (United
Kingdom)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
15
London (United
Kingdom)
*
TC 68
Financial services
Washington, D.C
(USA)
**
TC 46/SC 11
Information and documentation/Archives/records management
**
TC 178
Lifts, escalators and moving walks
**
TC 135
Non-destructive testing
(USA)
**
REMCO
Committee on reference materials
(Brazil)
**
TC 28
Petroleum products and lubricants
Beijing (China)
**
TC 36
Cinematography
(Germany)
**
TC 37
Terminology and other language and content resources
(Japan)
**
TC 44
Welding and allied processes
(USA)
**
TC 142
Cleaning equipment for air and other gases
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
(South Africa)
**
REMCO
Committee on reference materials
(Finland)
**
TC 44
Welding and allied processes
London (United
Kingdom)
**
TC 142
Cleaning equipment for air and other gases
(China)
**
TC 155
Nickel and nickel alloys
(Russian
Federation)
**
REMCO
Committee on reference materials
(Australia)
**
TC 44
Welding and allied processes
September 2014
(South Africa)
October 2014
Prague (Czech
Republic)
Month unknown 2014
2nd Quarter 2015
(China)
Month unknown 2015
Month unknown 2016