Richard D. Hale
1530 W.15th Street
2120 Learned Hall
Lawrence, KS 66045-2221
(785) 864-2949
(785) 864-3597 FAX
rhale@ku.edu
www.engr.ku.edu/~rhale
INTERESTS
Composite materials and structures, unmanned air vehicles, experimental stress analysis, solid
mechanics, nondestructive evaluation techniques, multidisciplinary design optimization, knowledge
based systems and engineering education.
EDUCATION
Iowa State University, Ames, IA
Ph.D., Engineering Mechanics, December 1995
Emphasis: Solid Mechanics/Composite Materials
Washington University, St. Louis, MO
M.S., Mechanical Engineering, May 1991
Emphasis: Solid Mechanics/Composite Materials
Iowa State University, Ames, IA
B.S., Aerospace Engineering, December 1988
Emphasis: Aircraft Structures
HONORS
 NASA Group Achievement Award, 2011
 John and Winifred Sharp Teaching Professorship, 2007-2010
 Henry E. Gould Award for Distinguished Service to Undergraduate Education, 2005.
 William T. Kemper Fellowship for Teaching Excellence, 2003
 Miller Professional Development Award for Distinguished Research in Engineering, 2003
 Henry E. Gould Award for Distinguished Service to Undergraduate Advising, 2003.
 Henry E. Gould Award for Distinguished Service to Undergraduate Education, 2002.
 Bellows Fellow, College of Engineering, University of Kansas, 2000-2001
 Aerospace Engineering Educator of the Year, 1999-2000; 2001-2002, 2003-2004, 2005-2006.
 Excellence in Teaching Award, Center for Teaching Excellence, 4 May, 2000; 9 May, 2002.
 Technical Contribution Award. American Institute of Aeronautics and Astronautics, St. Louis
Section, 20 May, 1999.
 Iowa State University Research Excellence Award for Outstanding Graduate Research,
December, 1995
 ISU Institute for Physical Research and Technology Fellowship
 Honor Societies: Tau Beta Pi, Sigma Gamma Tau, Pi Mu Epsilon, Phi Beta Delta
PROFESSIONAL AFFILIATIONS
 Associate Fellow: American Institute of Aeronautics and Astronautics
 Member: American Society for Engineering Education, Society of Automotive Engineers,
i
PROFESSIONAL EXPERIENCE
Associate Professor, August 2004 to present
Assistant Professor, August 1998 to July 2004
The University of Kansas, Department of Aerospace Engineering
 Responsible for Junior and Senior level courses in materials, processes, structural analysis and




















finite element analysis, and for graduate courses in composite materials and structures.
PI on 26 awards totaling $3,550,513 and Co-I on 14 awards totaling $59,481,088
PI. “NASA National Space Grant Consortium College and Fellowship Program FY2012.” NASA, 1/1/12
– 12/31/12. $49,683+$35,628 match.
PI, “Development of a high-power, large antenna array and ultra-wideband radar for a Basler for
sounding and imaging.” NSF, 10/1/12-9/30/14. $1,782,320 + $206,175 match
PI, “NESSF Fellowship: Enhancing Airborne Remote Sensing Radar to Provide Higher Quality Ice Sheet
Measurements”, NASA, 9/1/12-8/31/13. $30,000.
PI. “EcoSAR: The First P-Band Digital Beamforming Polarimetric Interferometric SAR Instrument to
measure Ecosystem Structure, Biomass, and Water.” NASA. 1/4/11 – 3/31/14. $745,634.
Co-I, “Electromagnetic Environmental Concerns for Carbon-Fiber Composite Structures.” Aircraft
Design Manufacturing Research Center, 1/1/10-12/31/10, $100,000.
Co-I. “Measurement, Materials and Sustainable Environment Center (M2SEC).” NIST. 5/10/10-4/30/15.
$13,450,000.
PI. “NASA National Space Grant Consortium College and Fellowship Program FY2011.” NASA, 1/1/11
– 12/31/11. $49,682+$35,627 match.
Co-I, “NSF Center for Remote Sensing of Ice Sheets”, $18,000,000. National Science
Foundation, June, 2010 – June, 2015.
Co-I. “Integrated Radar Instrumentation for Deployment During the NASA 2010 Operation IceBridge
Field Campaign.” NASA. 11/1/09-10/31/10. $2,100,000.
PI, “NASA National Space Grant Consortium College and Fellowship Program NASA 2009.”
Kansas Space Grant Consortium (NASA), 4/1/09-3/31/10. $65,653 NASA + $38,768 match
Co-I, “Radar Instrumentation for DC-8 for Measurements over Antarctic Ice.” NASA. 6/1/094/30/10, $1,904,369.
Co-I, “Science and Technology Center: Ice Sheets and Sea Level Rise”, $19,797,469, National
Science Foundation, June, 2005 – June, 2010.
PI. “Development of a Collaborative Transportation Vehicle Prototyping Center, with Initial
Application to a Low Altitude Medium Endurance UAV for Transportation Research.” KU
Transportation Research Institute. 8/16/08-5/1/10. $200,000 TRI plus $108,762 industry match
plus $123,862 local match.
Co-I. IGERT: C-CHANGE Climate Change, Humans and Nature in the Global Environment.”
NSF. 7/1/08-6/30/13. $3,200,000.
PI, “NASA National Space Grant Consortium College and Fellowship Program NASA 2008-09.”
Kansas Space Grant Consortium (NASA), 1/5/08-1/4/09. $42,000 NASA + $28,000 match
PI, “Exploration Systems Mission Directorate Higher Education 2006 NASA Exploration
Internships.” Kansas Space Grant Consortium (NASA), 5/01/07-7/31/07, $24,000 NASA
PI, “NASA National Space Grant Consortium College and Fellowship Program 2006-07.”
Kansas Space Grant Consortium (NASA), 1/5/07-5/31/08, $42,000 NASA + $28,000 match
PI, “NASA National Space Grant Consortium.” Kansas Space Grant Consortium (NASA),
original grant 1/5/06-12/31/06, $15,500 supplement awarded Fall ’07, $19,947 supplement and
$19,947 match awarded Fall ‘07
PI, “University of Kansas Space Grant Consortium Summer Research Program for Students in
Higher Education.” Kansas Space Grant Consortium (NASA), 5/22/06-12/31/06, $22,247
ii






PI, “Undergraduate Research Experiences in the Center for Remote Sensing of Ice Sheets.” KU
Office of the Provost. 8/15/06 to 12/31/06. ($6000)
PI, “Adaptive Aircraft Analysis -- Rapid Vehicle Engineering: AAA-Raven, A Research
Initiation Proposal for the Transportation Research Institute.” KU Transportation Research
Institute, 8/18/06 to 8/17/07, ($49,986+$16,644 (KU) + $235,000 (Industry)),
PI, “Acquisition of a Shack-Hartmann Wavefront Sensor to Enable a Kansas Resource for Fiber
Reinforced Plastic Mirrors,” Kansas NASA EPSCoR, 8/16/06 – 3/31/07, $37,062.
PI, “Thermal and Hygroscopic Stability of Carbon Composite Blanks for Fiber Reinforced
Plastic Mirrors,” Kansas NASA EPSCoR, 8/01/06 – 5/31/07, $19589.
PI, “Cryogenic Thermal Response of Monolithic Laminates for Mirrors,” Catholic University of
America, 8/01/06 – 2/28/07, $5000
PI, “Medium Aperture Lightweight Mirrors,” $5,000, Bennett Optical Research, Inc., September,
2005 – June, 2006.

PI, Midwest Smart Work Zone Deployment Initiative: Design of Portable Rumble Strips Phase II,”
$22,150, Kansas Department of Transportation, August, 2005-July, 2006.

Co-I, “Multidisciplinary Entrepreneurship Thematic Learning Community: Creating
Opportunities for Enrepreneurship Education From Top to Bottom,” $7,000, Lemelson
Foundation, June, 2005 – May, 2006.
Co-I, “Science and Technology Center: Ice Sheets and Sea Level Rise”, $19,797,469, National Science
Foundation, June, 2005 – June, 2010.
Co-I, “Mission Concepts for Uninhabited Aerial Vehicles in Cryospheric Science Applications,
$74,570, NASA, June, 2004-December, 2004



PI, “Midwest Smart Work Zone Deployment Initiative: Design of Portable Rumble Strips”, $18,640,
Kansas Department of Transportation, January, 2004-December, 2004.

Co-I, "Collaborative Research: Development of an Ultra-Lightweight Telescope for GroundBased Research in Optical Astronomy – REU Supplement", $10,816, National Science
Foundation, September, 2003 - August, 2006.
Co-I, "Collaborative Research: Development of an Ultra-Lightweight Telescope for GroundBased Research in Optical Astronomy", $585,785, National Science Foundation, September,
2003 - August, 2006.
PI, " Structural and Aerodynamic Optimization of Ultralightweight Technology for Research in
Astronomy", $79,988, NASA EPSCoR, June 2003 - December 2003.
PI, "Hydroforming Continuous Fiber Thermoplastic Composites", $11,708, KU General
Research Fund, June, 2003 - May, 2004.
PI, " Integrating Knowledge Capture and Knowledge Reuse in the Engineering Undergraduate
Curriculum", $100,000, National Science Foundation, Oct. 2002 - Dec. 2003.
Co-I, "Integrating Modern Design and Manufacturing Equipment into the Engineering Curricula,
CCLI", $87,299 (+$108,416 match), National Science Foundation, June 2002 - May 2004.
PI, "Mechanical Performance and Quantitative Nondestructive Evaluation of Textile
Composites," $137,533, NSF EPSCoR, Oct. 2000 - Dec. 2001 (ext. May 2002).
PI, "Integrated Design and Analysis Tools for Reduced Weight, Affordable Fiber Steered
Composites," $297,986, DoD EPSCoR (ONR), May 2000 - Apr. 2003.
Co-I, "Surface Studies of Carbon Fibers and Composites," $70,364, Oct. 1999 - Sep. 2001.
PI, "Web Based Collaborative Environment With Knowledge Driven Agents," $5,649,
TechnoSoft, Inc., Aug. 1999.
PI, "Integrated Design and Analysis Tools for Composites," $22,493, The Boeing Company, June
1999 - Aug. 1999.










iii
Senior Project Engineer, Design/Development, February 1989 to July 1998
The Boeing Company (formerly McDonnell-Douglas Aerospace East), St. Louis, MO
Security Clearance: DoD Secret
 Defined the best-practice process for design, analysis and manufacturing of composite structure
and developed a knowledge based software tool to facilitate this process
 Developed the ply layup for the inlet duct and all skin panels for the forward fuselage of the Joint
Strike Fighter Concept Demonstrator Aircraft
 Explored fiber steering and the fiber placement process through analytical and experimental
studies to assess the potential for providing reduced weight, affordable composite structure
 Developed and twice taught a 40 hour internal training course in composite design practices and
fundamentals of finite element analysis
 Performed analyses for a composite carrythrough bulkhead, thick composite lugs and multidirectionally reinforced (non-planar) composite fittings
 Initiated structural trade studies and recommended technology integration for conceptual aircraft
Research Assistant, September 1992 to December 1995
Institute for Physical Research and Technology, Iowa State University, Ames, IA
 Performed basic research into the behavior of textile composites, including fabrication, ultrasonic
nondestructive evaluation, and mechanical testing using Moiré interferometry
 Investigated the effects of fiber misalignment, undulation and architecture distortion on
mechanical properties
 Designed and demonstrated laboratory tools and procedures for fabricating idealized textile
composites exhibiting intentionally aligned fiber patterns or specific fiber architecture distortions
COURSES DEVELOPED AND TAUGHT AT KU
 AE421, Aerospace Computer Graphics, 4 cr. (Spring '00, Spring '01, Spring '02, Spring '03,
Spring ’04, Spring ’05, Spring ’07, Spring ’08, Spring ’09, Spring ‘11, Spring ’12, Spring ‘13)
 AE508, Aerospace Structures II, 3 cr. (Spring '99, Spring '00, Spring '01, Spring '02, Spring '03,
Spring ’04, Spring ’05, Spring ’06, Spring ’07, Spring ’08, Spring ’09, Spring ’11, Spring ’12,
Spring ‘13)
 AE509, Aerospace Structures II, Honors, 3 cr. (Spring '00, Spring '01, Spring ’04, Spring ‘05)
 AE510, Aerospace Materials and Processes, 4 cr. (Fall '98, Fall '99, Fall '00, Fall '01, Fall '02,
Fall '03, Fall ’04, Fall ’05, Fall ’06, Fall ’07, Fall ’08, Fall ’09, Fall ’10, Fall ’11, Fall’12, Fall
‘13)
 AE709, Composite Structures, 3 cr. (Fall '99, Fall '00, Fall '01, Fall '02, Fall ’04, Spring ’06, Fall
’08, Fall ’09, Fall ’10, Fall ’11, Spring ‘12)
 AE710, Advanced Composite Structures, 3 cr. (Spring '02, Spring '03, Spring ’05, Spring ’09,
Spring ‘11)
 AE790, Structural Design and Analysis of Unmanned Aircraft, 3 cr., (Fall ’06)
MAJOR SCHOLARSHIP
Book Sections
Hale, R.D. “Composite Structures”, 2001 McGraw-Hill Yearbook of Science and Technology,
McGraw-Hill, October, 2000. pp. 105-107
Patents
iv
Hale, R.D. and Vasey-Glandon, V.M. “Fiber Placement and Fiber Steering Systems and Corresponding
Software for Composite Structures” U.S. Patent 6,799,081 issued 26 September, 2004.
Vasey-Glandon V.M. and Hale, R.D. “Knowledge –Driven Composite Design Optimization Process and
System Therefor” European patent EP 1 050 396 B1 issued 6 August, 2003.
Vasey-Glandon V.M. and Hale, R.D. “Knowledge –Driven Composite Design Optimization Process
and System Therefor” U.S. Patent 6,341,261 B1 issued 22 January, 2002.
Vasey-Glandon V.M. and Hale, R.D. “Knowledge –Driven Composite Design Optimization Process
and System Therefor” U.S. Patent 5,984,511 issued 16 November, 1999.
Engineering Development Projects at KU (Professional Practice)
Team Lead, MRI: Development of a high-power, large antenna array and ultrawideband radar for a
Basler for sounding and imaging of fast-flowing glaciers and mapping internal layers
Team Lead, Meridian UAV; 26’ span, 1100 lb UAV designed for polar remote sensing
Team Lead, Mccords ice penetrating radar installation on NASA DC8; first bed topology from
30,000ft at Mach 0.8
Team Lead, Mcords, accumulation, snow and KU radar installation on NASA P-3; world’s largest
ice penetrating radar installation
International Field Deployments (Professional Practice)
Team Lead, NEEM, Greenland, May 15-Aug 15, 2011
Team Lead, McMurdo, Antarctica, Dec. 4, 2009 – Jan 10, 2010
Team Lead, McMurdo and WAIS Divide, Antarctica, Dec 10, 2007-Jan 9, 2008
Journals
F. Rodriguez-Morales, S. Gogineni, C. Leuschen, J. Paden, J. Li, C. Lewis, B. Panzer, D. Gomez-Garcia,
A. Patel, K. Byers, R. Crowe, K. Player,R. Hale, E. Arnold, L. Smith, C. Gifford, D. Braaten, and C.
Panton. “Advanced Multi-Frequency Radar Instrumentation for Polar Research. IEEE Transactions
on Geoscience and Remote Sensing, In press.
J. Li, J. Paden, C. Leuschen, F. Rodriguez-Morales, R. Hale, E. Arnold, R. Crowe, D. GomezGarcia, and P. Gogineni, "High-Altitude Radar Measurements of Ice Thickness over the Antarctic
and Greenland Ice Sheets as a part of Operation Ice Bridge," IEEE Transactions on Geoscience and
Remote Sensing, volume 51, number 2, 2013.
K. J. Byers, A. R. Harish, S. A. Seguin, C. Leuschen, F. Rodriguez-Morales, J. Paden, E. Arnold,
and R. Hale, "A Modified Wideband Dipole Antenna for an Airborne VHF Ice Penetrating Radar,"
IEEE Transactions on Instrumentation and Measurement, vol. 61, pp. 1435-1444, May 2012.
Lan, C.E., S. Keshmiri and R.D. Hale. “Fuzzy Logic Modeling of a Rolling Unmanned Vehicle in
Antarctic Wind Shear.” Journal of Guidance, Control, and Dynamics, volume 35, number 5, (2012).
C. T. Allen, R. D. Hale, C. J. Leuschen, J. D. Paden, B. G. Panzer, E. Arnold, W. A. Blake, F.
Rodriguez-Morales, J. D. Ledford, and S. A. Seguin, "Antarctic Ice Depth-sounding Radar
Instrumentation for the NASA DC-8," IEEE Transactions on Aerospace and Electronic Systems, vol.
27, pp. 4-20, 03/2012 2012.
Kim. K and R.D. Hale. “Extensional and Flexural Stiffness in Quasi-Isotropic Laminates Using
Continuous Fiber Reinforced Plastics and Distributed (Homogeneous) Fiber Reinforced Plastics.”
Journal of Advanced Materials, v2, 2011.
v
Kim, Kyung-Pyo; Hale, Richard D. “Composite mirror surface deformation due to lay-up sequences
within quasi-isotropic laminates.” Optical Engineering, Volume 49, Issue 6, pp. 063002-063002-10
(2010)
Anemaat, W., B. Kaushik, R.D. Hale and N. Ramabadran. “A Knowledge-Based Design Framework
for Aircraft Conceptual and Preliminary Design.” SAE Transactions, 2007, Vol 115, Part 1, pp 598611.
Hale, R.D., Schueler, K.L. and Lim, K. "Object-Oriented Design and Analysis Tools for Fiber
Steered Composites." Journal of Advanced Materials. SAMPE. (II), 2006.
Schueler, K.L.; Miller, J.R. and Hale, R.D. Approximate Geometric Methods in Application to the
Modeling of Fiber Placed Composite Structures. Journal of Computing and Information Science in
Engineering. Volume 4, The American Society of Mechanical Engineers. 2004. pp 251-256.
Hale, R.D. "An Experimental Investigation of Strain Distribution in 2D and 3D Textile Composites."
Composites Science and Technology. Volume 63, Number 15, 2003. pp. 2171-2185.
Hale, R.D. and Villa, M. "Influence of Opposing Wave Nesting in Compression-Loaded
Composites." Journal of Composite Materials. Volume 37, Number 13, 2003. pp. 1149-1166.
Hale, R.D. and Adams, D.O. "Influence of In-Plane Fiber Misalignment on Moiré Interferometry
Results," Journal of Composite Materials, Volume 31, Number 24, 1997. pp. 2444-2459.
Hale, R.D. and Adams, D.O. “Fabrication Methods for Producing Idealized Fiber Architecture in
Textile Composites,” Advanced Composite Letters, Volume 2, Number 5, Woodhead Publishing,
Ltd., 1993. pp. 183-186.
Software Systems
Ramabadran, N., Anemaat, W. and Hale, R.D. “Adaptive Aircraft Analysis – Rapid Vehicle
Engineering.” 2004-2008.
Hale, R.D. and Schueler, K.L. "Steered Composite Analysis and Design System," 2000-2004.
Vasey-Glandon, V.M., Hale, R.D. et.al. “Parametric Composite Knowledge System,” McDonnellDouglas proprietary software code (now commercialized to Unigraphics Solutions Inc.), 1996-1999.
Conference Proceedings (refereed)
F, Rodriguez-Morales, S. Gogineni, C. Leuschen, J. Paden, B. Panzer, C. Lewis, D. Gomez, R.
Crowe, A. Patel, R. Hale, E. Arnold, J. Li, S. Yan, and D. Braaten. “Airborne Radar Sensor Package
for Coincidental Multi-Frequency Measurements over the Cryosphere.” European Geosciences
Union General Assembly 2013, Vienna, Austria, 7-12 April, 2013.
W.A. Anemaat, W. Liu, B. Kaushik, M. Yang, M. Brown, R. Hale, “Design, Build and Fly: NASA
Lockheed P3 Orion with External Antenna Fairings”, AIAA-2013-0019, 51st AIAA Aerospace
Sciences Meeting, January 7-10, 2013, Grapevine, Texas.
P. Gogineni, D. Braaten, F. Rodriguez-Morales, J. Li, C. Leuschen, J. Paden, R. Hale, E. Arnold, B.
Panzer, D. Gomez-Garcia, R. Crowe, A. Patel, and J. B. Yan, "Multi-Frequency Airborne Radar
Measurements of Outlet Glaciers and Ice Streams," American Geophysical Union, 2012. 3-7
December, 2012. San Francisco, CA.
Gogineni. S., J Paden., R. Hale, C. Leuschen, D. Braaten, F. Rodriguez-Morales, S. Yan and J. Li.
“Ultra Wideband Radars for Imaging of Ice-Bed Topography and Fine-Resolution Mapping of
vi
Internal Layers from the surface to Bed.” International Partnerships in Ice Core Sciences First open
Science Conference, 1-5 October, 2012. Presquile de Giens, Cote d’Azur, France.
Emily J. Arnold, Jie-Bang Yan, Jilu Li, Richard Hale, Fernando Rodriguez-Morales, and Prasad
Gogineni. “Identification and Compensation of Aircraft Integration Effects in Wing-Mounted Phased
Array for Ice Sheet Sounding.” Antenna Applications Symposium, 18-20 September, 2012. Amherst,
MA.
R. F. Rincon, T. Fatoyinbo, K. J. Ranson, G. Sun, M. Deshpande, M. Perrine, C. F. Du Toit, Q.
Bonds, V. Marrero, R. D. Hale, A. Bhat, and P. James. “Development of the ECOSAR P-Band
Synthetic Aperture Radar.” Proceedings of the IEEE International Geoscience and Remote Sensing
Symposium, 22-27 July, 2012, Munich, Germany.
P. Gogineni, D. Braaten, F. Rodriguez-Morales, J. Li, C. Leuschen, J. Paden, R. Hale, E. Arnold, B.
Panzer, D. Gomez-Garcia, R. Crowe, A. Patel, and J. B. Yan, "Multi-Frequency Airborne Radar
Measurements of Outlet Glaciers and Ice Streams," XXXII Scientific Committee on Antarctic
Research Science Week, 17-19 July, 2012, Portland, OR.
S. Gogineni, C. Leuschen, J. Paden, F. Rodriguez-Morales, J. Li, R. Hale, D. Braaten, E. Arnold, B.
Panzer, D. Gomez, R. Crowe, A. Patel, and S. Yan “Radar Instrumentation for Polar Research.”
Proceedings of the BGS/RAS/IGS/TGS New Advances in Geophysics Meeting, 9-10 February,
2012, London, England.
J. Li, S. Gogineni, J. Paden, C. Leuschen, F. Rodriguez-Morales, R. Crowe, D. Gomez-Garcia, R.
Hale. “Coherent and Incoherent Clutter Reduction Techniques to Sound Ice from High Altitudes.”
EUSAR 2012 – 9th European Conference on Synthetic Aperture Radar. 23-26 April, 2012.
Nuremberg, (invited)
S. Gogineni, J. Li, J. Paden, L. Smith, R. Crowe, A. Hoch, C. Lewis, E. Arnold, F. RodriguezMorales, C. Leuschen, R. Hale, A. Harish and D. Braaten. “Sounding and Imaging of Fast Flowing
Glaciers and Ice-Sheet Margins.” EUSAR 2012 – 9th European Conference on Synthetic Aperture
Radar. 23-26 April, 2012. Nuremberg, Germany (invited).
Hale, R.D., E. Arnold, M. Ewing and W. Liu. “Method for Design and Analysis of Externally
Mounted Antenna Fairings in Support of Cryospheric Surveying” AIAA-2011-171, 52nd
AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver,
CO 4-7 April, 2011.
Leuschen, C.; Gogineni, P. S.; Allen, C.; Paden, J. D.; Hale, R.; Rodriguez-Morales, F.; Harish, A.;
Seguin, S.; Arnold, E.; Blake, W.; Byers, K.; Crowe, R.; Lewis, C.; Panzer, B.; Patel, A.; Shi, L. “The
CReSIS Radar Suite for Measurements of the Ice Sheets and Sea Ice during Operation Ice Bridge.” American
Geophysical Union, Fall Meeting 2010, abstract #C44A-02.
Hale. R.D., W.R. Donovan, and S. Keshmiri. “UAS Cryospheric Remote Sensing in the Center for
Remote Sensing of Ice Sheets,” AUVSI’s Unmanned Systems North America 2009, August 10-13,
2009. Washington, DC.
Hale, R.D. and K.P. Kim. “Surface Deformation in a Circular Quasi- Isotropic Laminate Due to
Additional Resin Layers.” AIAA-2009-2420, 50th AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics, and Materials Conference, 4-7 May, 2009, Palm Springs, CA.
Shah Keshmiri§, Edmond Leong, Rylan Jager, and Richard Hale. “Modeling and Simulation of the
Yak-54 Scaled Unmanned Aerial Vehicle Using Parameter and System Identification.” AIAA-20086900, AIAA Atmospheric Flight Mechanics Conference and Exhibit, 18 - 21 Aug 2008, Honolulu,
vii
Hawaii
W.R. Donovan, R.D. Hale , and W. Liu “Design and Structural Analysis of the Meridian Unmanned
Aircraft” AIAA-2008-2261, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics,
and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL.
D.M. Mueller, W.R. Donovan, E. Runge, and W. Liu, “Structural Design, Analysis, and Testing of
Vivaldi Ground Penetrating Radar Antennas for the Meridian UAS,” AIAA-2008-1832, 49th
AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7 - 10
Apr 2008, Schaumburg, IL. (student paper competition, team mentored by R. Hale).
K.P. Kim and R.D. Hale. “Design of Directionally Uniform Extensional and Flexural Stiffness in
Quasi-Isotropic Laminates.” AIAA-2008-1749, 49th AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics, and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL.
K.P. Kim and R.D. Hale. “Analysis of Surface Deformation Due to Thermal Load on Circular
Quasi-Isotropic Laminate Mirrors.” AIAA-2008-2185, 49th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics, and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL.
Jezek, K., Braaten, D., Gogineni, S., van der Veen, C., Allen, C., Alley, R., Allison, I.,
Anandakrishnan, S., Bindschadler, R., Bowen, C., Bromwich, D., Colgren, R., Dahl-Jensen, D.,
Downing, D., Ewing, M., Fastook, J., Hale, R., Hayden, L., Hughes, T., Joughin, I., Krabill, W.,
Landis, C., LeCompte, M., Leuschen, C., Mosley-Thompson, E., Pollard, D., Prescott, G., Rignot, E.,
Thomas, R., Thompson, L., Webber, G., Wingham, D., and Zagorodnov, V., “Center for Remote
Sensing of Ice Sheets (CReSIS),” EOS Transactions, AGU, 88(38), 371, 2007.
Anemaat, W., B. Kaushik, R.D. Hale and N. Ramabadran. “AAARaven: Knowledge-Based Aircraft
Conceptual and Preliminary Design.” AIAA-2007-2291. 48th AIAA / ASME / ASCE / AHS / ASC
Structures, Structural Dynamics and Materials Conference, Hawaii, 2007.
Donovan, W.R., R.D. Hale. M. Ewing and K Siegele. “The Design and Development of the Onboard
Systems for the Meridian Unmanned Aircraft.” AIAA-2007-2745, Infotech at Aerospace, California,
May, 2007
Peter C. Chen and Richard D. Hale. “Large Aperture Nanocomposite Deformable Mirror
Technology.” 3rd International Symposium on Advanced Optical Manufacturing and Testing
Technologies: Large Mirrors and Telescopes. Edited by Zhang, Yudong; Jiang, Wenhan; Cho,
Myung K.. Proceedings of the SPIE, Volume 6721, pp. 67210R (2007).
Donovan, W.R., R.D. Hale. M. Ewing and K Siegele. “The Design and Development of the Onboard
Systems for the Meridian Unmanned Aircraft.” Infotech at Aerospace, California, May, 2007.
Donovan, W.R. and R.D. Hale. “The Design of an Uninhabited Air Vehicle for Use in Polar
Research.” SAE 06GATC-77, Proceedings of the SAE General Aviation Technology Conference,
Wichita, KS. 30 August, 2006.
Anemaat, W., B. Kaushik, R.D. Hale and N. Ramabadran. “A Knowledge-Based Design Framework
for Aircraft Conceptual and Preliminary Design.” SAE 06GATC-75, Proceedings of the SAE
General Aviation Technology Conference, Wichita, KS. 30 August, 2006.
Hale, R.D., Landes, J.A. and Kaushik, P.B.R. “Structural Design and Simulation of Ultralightweight
technology for Research in Astronomy,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural
Dynamics and Materials Conference, Newport, Rhode Island, 1-4 May, 2006.
viii
Landes, J., Hale, R.D. and Ewing, M. “Dynamic Structural Response of a Fiber Reinforced Plastic
Telescope Mirror,” Society for Experimental Mechanics IMAC XXIV, St. Louis, Missouri USA,
January 30 – February 2, 2006
Mathur, Guarov, R. Taghavi and R.D Hale. "A Computational and Experimental Analysis of the
Flow Around a Tractor-Trailer." FEDSM2005-77324, 2005 American Society for Mechanical
Engineers Fluids Engineering Summer Conference, June 19-23, 2005, Houston, TX.
Kaushik, B., R.D. Hale and R. Taghavi. "CFD Application for the Characterization of Surface
Pressures on Telescopes." FEDSM2005-77345, 2005 American Society for Mechanical Engineers
Fluids Engineering Summer Conference, June 19-23, 2005, Houston, TX.
Boone, Bradley G., Jonathan R. Bruzzi, Bernard E. Kluga, Eric W. Rogala, Peter Chen and R.D.
Hale. Development and Testing of an Actively-Controlled Large Aperture Cassegrain Telescope for
Spacecraft Deployment, Proceedings of SPIE -- Volume 5487, Optical, Infrared, and Millimeter
Space Telescopes, John C. Mather, Editor, October 2004, pp. 1042-1053
Hale, R.D. and Villa, M. "Static and Dynamic Mechanical Influence of Fiber Waviness textile
Composites," AIAA-2003-1464, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural
Dynamics and Materials Conference, Norfolk, VA, 7-10 April, 2003.
Moon, R.S., Johnson, C.C. and Hale, R.D. "Nondestructive Evaluation and Mechanical Testing of
Steered Fiber Composites," SAMPE 2002, May 13-16, 2002, Long Beach CA.
Hale, R.D. and Schueler, K. "Object Oriented Design and Analysis Tools for Fiber Placed and Fiber
Steered Structures," SAMPE 2002, May 13-16, 2002, Long Beach CA.
Wiehn, M. and Hale, R.D. "Low Cost Robotic Fabrication Methods for Tow Placement," SAMPE
2002, May 13-16, 2002, Long Beach CA.
Moon, R., Lim, K., Schueler, K., Wiehn, M. and Hale, R.D. "Current Progress on Integrated Design
and Analysis Tools for Fiber Steered Composites," AIAA-2002-1763, 43rd
AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver,
CO, 22-25 April, 2002.
Hale, R.D. and Schueler, K. "Object-Oriented Implementation of an Integrated Design and Analysis
Tool for Fiber Placed Structures," AIAA-2002-1223, 43rd AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, Denver, CO, 22-25 April, 2002.
Hale, R.D. and Schueler, K. "Knowledge-Based Software Systems for Composite Design, Analysis
and Manufacturing," SAE 2002-01-1536, SAE General Aviation Technology Conference and
Exposition, April 16-18, 2002, Wichita KS.
Hale, R.D. and Vasey-Glandon, V.M. "PACKS: An Affordable Knowledge-Driven Composite
Design for Manufacturing Process." SAMPE 2001, May 6-10, 2001, Long Beach CA.
Ewing, M.S., Yilmaz, Y. and Hale, R. "Using a Simple Concentric Cylinder Model to Interpret
Failure Stresses in a Single Fiber Fragmentation Test", Seventh Annual International Conference on
Composites Engineering, Denver, CO, 2-8 July, 2000.
Vasey-Glandon, V.M. and Hale, R.D. “PACKS (Parametric Composite Knowledge System): An
Affordable Structural Definition Process for Composites”, 41st AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, Atlanta, GA, 3-6 April, 2000.
ix
Hsu, D.K., Peters, J.J. and Hale, R.D. “Ultrasonic Imaging of Internal Structures of a Fiber Steered
Composite Panel,” Review of Progress in Quantitative Nondestructive Evaluation, Volume 18,
Kluwer Academic/Plenum Publishing, 1999. Pp. 1313-1319.
Hale, R.D., Hsu, D.K. and Adams, D.O. "Ultrasonic NDE Techniques and the Effects of Flaws on
Mechanical Performance in Multi-Directionally Reinforced Textile Composites," Review of
Progress in Quantitative Nondestructive Evaluation, Volume 15, Plenum Publishing, 1996. pp.
1247-1254.
Hale, R.D. and Hsu, D.K. “Ultrasonic NDE of 3D Textile Composites,” Review of Progress in
Quantitative Nondestructive Evaluation, Volume 14, Plenum Publishing, 1995. pp. 1407-1414.
Hale, R.D. and Hsu, D.K. “Ultrasonic NDE of 3D Textile Composites — A Preliminary Study,”
Review of Progress in Quantitative Nondestructive Evaluation, Volume 13, Plenum Publishing,
1994. pp. 1245-1252.
Dissertation
Hale, R.D. "Ultrasonic Nondestructive Evaluation Techniques and the Effects of Fiber Architecture
on Mechanical Performance in Multi-Directionally Reinforced Textile Composites," Ph.D.
Dissertation, Iowa State University, 1995.
MINOR SCHOLARSHIP
Patent Applications
Hale, R.D. and Schueler, K. "Geometric Methods for Analysis, Design and Optimization of Fiber
Paths in Tow-Based Composites, and System Therefor." Disclosure Statement, University of Kansas,
20 November, 2002.
Hale, R.D. and Vasey-Glandon, V.M. "Fiber Placement and Fiber Steering Systems and
Corresponding Software for Composite Structures." Attorney Docket 99-441, Submitted to U.S.
Patent Office July, 2001.
Hale, R.D. and Vasey-Glandon, V.M. “Parametric Composite Knowledge System (PACKS): Fiber
Placement and Fiber Steering Development for Composite Structures.” Disclosure statement, The
Boeing Company, 20 December, 1999.
Vasey-Glandon, V.M., Hale, R.D. and Schmitz, J. "Knowledge Driven Composite Design
Optimization Process and System Therefor," European patent application 99302710.1, 4 July, 1999.
Vasey-Glandon, V.M., Hale, R.D. and Schmitz, J. "Knowledge Driven Composite Design
Optimization Process," submitted to the U.S. patent office, 14 November, 1996.
Hale, R.D. and Adams, D.O. “Cure-on-the-Loom Technology — a Statement of Disclosure,”
Submitted to Iowa State University Research Foundation, Henderson & Sturm patent attorneys and
the U.S. Patent Office, 10 October, 1993.
Conference Proceedings (Refereed Abstract)
Mathur, Guarov, R. Taghavi and R.D Hale. "A Computational and Experimental Analysis of the
Flow Around a Tractor-Trailer." FEDSM2005-77324, Accepted for publication and presentation at
2005 American Society for Mechanical Engineers Fluids Engineering Summer Conference, June 1923, 2005, Houston, TX.
x
Kaushik, B., R.D. Hale and R. Taghavi. "CFD Application for the Characterization of Surface
Pressures on Telescopes." FEDSM2005-77345, Accepted for publication and presentation at 2005
American Society for Mechanical Engineers Fluids Engineering Summer Conference, June 19-23,
2005, Houston, TX.
Twarog, B.A., B. J. Anthony-Twarog, S. J. Shawl, R. Hale, R. Taghavi, R. Fesen, P. B. Etzel, R.
Martin and R. Romeo. "The UltraLightweight Technology for Research in Astronomy (ULTRA)
Project," Bulletin of the American Astronomical Society, 36, No. 5, 48.02, 2004.
Etzel, P.B., R. Martin, R. Romeo, R. Fesen, R. Hale, R. Taghavi, B. J. Anthony-Twarog, S. J.. Shawl
and B. A. Twarog. "Structural and Aerodynamic Optimization of UltraLightweight Technology for
Research in Astronomy (ULTRA)," Bulletin of the American Astronomical Society, 36, No. 5,
48.03, 2004.
Maletsky, L.P. and Hale, R.D. "The Practical Integration of Rapid Prototyping Technology into
Engineering Curricula," Proceedings of the 2003 ASEE Midwest Section Meeting, 10 Sept. 2003.
Liu, Z., Fei, D., Dayal, V., Hsu, D.K. and Hale, R.D. "Ultrasonic NDE and Mechanical Testing of
Fiber Placement Composites." 28th Annual Review of Progress in Quantitative Nondestructive
Evaluation, Jul 29-Aug. 3, 2001, Brunswick, ME.
Verhulst, M.A., Hale, R.D., West, A.C. and Adams, D.O. "Model Materials for
Experimental/Analytical Correlations of Textile Composites," Proceedings of the SEM Spring
Conference on Experimental Mechanics, Bellevue, WA, 2-4 June, 1997, pp. 182-183.
Hale, R.D. and Adams, D.O. "Influence of Textile Composite Microstructure on Moire
Interferometry Results," Proceedings of the SEM Spring Conference on Experimental Mechanics,
Grand Rapids, MI, 12-14 June 1995, pp. 507-513.
SELECTED SCHOLARLY PRESENTATIONS
 F, Rodriguez-Morales, S. Gogineni, C. Leuschen, J. Paden, B. Panzer, C. Lewis, D. Gomez, R.
Crowe, A. Patel, R. Hale, E. Arnold, J. Li, S. Yan, and D. Braaten. “Airborne Radar Sensor
Package for Coincidental Multi-Frequency Measurements over the Cryosphere.” European
Geosciences Union General Assembly 2013, Vienna, Austria, 7-12 April, 2013.
 W.A. Anemaat, W. Liu, B. Kaushik, M. Yang, M. Brown, R. Hale, “Design, Build and Fly:
NASA Lockheed P3 Orion with External Antenna Fairings”, AIAA-2013-0019, 51st AIAA
Aerospace Sciences Meeting, January 7-10, 2013, Grapevine, Texas.
 P. Gogineni, D. Braaten, F. Rodriguez-Morales, J. Li, C. Leuschen, J. Paden, R. Hale, E. Arnold,
B. Panzer, D. Gomez-Garcia, R. Crowe, A. Patel, and J. B. Yan, "Multi-Frequency Airborne
Radar Measurements of Outlet Glaciers and Ice Streams," American Geophysical Union, 2012.
3-7 December, 2012. San Francisco, CA.


Gogineni. S., J Paden., R. Hale, C. Leuschen, D. Braaten, F. Rodriguez-Morales, S. Yan and J.
Li. “Ultra Wideband Radars for Imaging of Ice-Bed Topography and Fine-Resolution Mapping
of Internal Layers from the surface to Bed.” International Partnerships in Ice Core Sciences First
open Science Conference, 1-5 October, 2012. Presquile de Giens, Cote d’Azur, France.
Emily J. Arnold, Jie-Bang Yan, Jilu Li, Richard Hale, Fernando Rodriguez-Morales, and Prasad
Gogineni. “Identification and Compensation of Aircraft Integration Effects in Wing-Mounted
Phased Array for Ice Sheet Sounding.” Antenna Applications Symposium, 18-20 September,
2012. Amherst, MA.
xi





R. F. Rincon, T. Fatoyinbo, K. J. Ranson, G. Sun, M. Deshpande, M. Perrine, C. F. Du Toit, Q.
Bonds, V. Marrero, R. D. Hale, A. Bhat, and P. James. “Development of the ECOSAR P-Band
Synthetic Aperture Radar.” Proceedings of the IEEE International Geoscience and Remote
Sensing Symposium, 22-27 July, 2012, Munich, Germany.
P. Gogineni, D. Braaten, F. Rodriguez-Morales, J. Li, C. Leuschen, J. Paden, R. Hale, E. Arnold,
B. Panzer, D. Gomez-Garcia, R. Crowe, A. Patel, and J. B. Yan, "Multi-Frequency Airborne
Radar Measurements of Outlet Glaciers and Ice Streams," XXXII Scientific Committee on
Antarctic Research Science Week, 17-19 July, 2012, Portland, OR.
S. Gogineni, C. Leuschen, J. Paden, F. Rodriguez-Morales, J. Li, R. Hale, D. Braaten, E. Arnold,
B. Panzer, D. Gomez, R. Crowe, A. Patel, and S. Yan “Radar Instrumentation for Polar
Research.” Proceedings of the BGS/RAS/IGS/TGS New Advances in Geophysics Meeting, 9-10
February, 2012, London, England.
J. Li, S. Gogineni, J. Paden, C. Leuschen, F. Rodriguez-Morales, R. Crowe, D. Gomez-Garcia, R.
Hale. “Coherent and Incoherent Clutter Reduction Techniques to Sound Ice from High
Altitudes.” EUSAR 2012 – 9th European Conference on Synthetic Aperture Radar. 23-26 April,
2012. Nuremberg, (invited)
S. Gogineni, J. Li, J. Paden, L. Smith, R. Crowe, A. Hoch, C. Lewis, E. Arnold, F. RodriguezMorales, C. Leuschen, R. Hale, A. Harish and D. Braaten. “Sounding and Imaging of Fast
Flowing Glaciers and Ice-Sheet Margins.” EUSAR 2012 – 9th European Conference on
Synthetic Aperture Radar. 23-26 April, 2012. Nuremberg, Germany (invited).

Hale, R.D., E. Arnold, M. Ewing and W. Liu. “Method for Design and Analysis of Externally Mounted
Antenna Fairings in Support of Cryospheric Surveying” 52nd AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics and Materials Conference, Denver, CO 4-7 April, 2011.

Invited panelist and moderator, “Operating Unmanned Systems in the Arctic.” AUVSI’s
Unmanned Systems North America 2010, August 24-27, 2010. Denver CO. (schedule conflict so
Bill Donovan represented team)
Invited panelist, Ewing, M.S. and Hale, R. D., “Applied Research Activities in the Design
Education Curriculum at the University of Kansas”, presented at the Open Forum in Design
Education: The Role of Design Experience in Advancing Engineering Education (session 196),
49th AIAA Aerospace Sciences Meeting, Orlando, Florida, 6 Jan 2011.
Hale. R.D., W.R. Donovan, and S. Keshmiri. “UAS Cryospheric Remote Sensing in the Center
for Remote Sensing of Ice Sheets,” AUVSI’s Unmanned Systems North America 2009, August
10-13, 2009. Washington, DC.
Hale, R.D. and K.P. Kim. “Surface Deformation in a Circular Quasi- Isotropic Laminate Due to
Additional Resin Layers.” AIAA-2009-2420, 50th AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics, and Materials Conference, 4-7 May, 2009, Palm Springs, CA.
Shah Keshmiri§, Edmond Leong, Rylan Jager, and Richard Hale. “Modeling and Simulation of
the Yak-54 Scaled Unmanned Aerial Vehicle Using Parameter and System Identification.”
AIAA-2008-6900, AIAA Atmospheric Flight Mechanics Conference and Exhibit, 18 - 21 Aug
2008, Honolulu, Hawaii
W.R. Donovan, R.D. Hale, and W. Liu “Design and Structural Analysis of the Meridian
Unmanned Aircraft” AIAA-2008-2261,
49th AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics, and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL.
D.M. Mueller, W.R. Donovan, E. Runge, and W. Liu, “Structural Design, Analysis, and Testing
of Vivaldi Ground Penetrating Radar Antennas for the Meridian UAS,” AIAA-2008-1832, 49th
AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7 10 Apr 2008, Schaumburg, IL. (student paper competition, team mentored by R. Hale).






xii















K.P. Kim and R.D. Hale. “Design of Directionally Uniform Extensional and Flexural Stiffness in
Quasi-Isotropic Laminates.” AIAA-2008-1749, 49th AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics, and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL.
K.P. Kim and R.D. Hale. “Analysis of Surface Deformation Due to Thermal Load on Circular
Quasi-Isotropic Laminate Mirrors.” AIAA-2008-2185, 49th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics, and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL.
Anemaat, W., B. Kaushik, R.D. Hale and N. Ramabadran. “AAARaven: Knowledge-Based
Aircraft Conceptual and Preliminary Design.” AIAA-2007-2291. 48th AIAA / ASME / ASCE /
AHS / ASC Structures, Structural Dynamics and Materials Conference, Hawaii, 2007.
Donovan, W.R., R.D. Hale. M. Ewing and K Siegele. “The Design and Development of the
Onboard Systems for the Meridian Unmanned Aircraft.” AIAA-2007-2745, Infotech at
Aerospace, California, May, 2007
Peter C. Chen and Richard D. Hale. “Large Aperture Nanocomposite Deformable Mirror
Technology.” 3rd International Symposium on Advanced Optical Manufacturing and Testing
Technologies: Large Mirrors and Telescopes. Edited by Zhang, Yudong; Jiang, Wenhan; Cho,
Myung K.. Proceedings of the SPIE, Volume 6721, pp. 67210R (2007).
R.D. Hale, “Development of an Uninhabited Aircraft for Cryospheric Remote Sensing,” National
Oceanic and Atmospheric Administration Arctic Unmanned Aircraft Stakeholder Meeting, Oct.
16-17, 2007, Fairbanks, AK.
R.D. Hale. “Strategic Alignment of Teaching and Research Enabled Through Virtual Product
Development.” MSC Virtual Product Definition Conference, Oct 11-2, 2007
CReSIS UAV Team Activities, presented at the 2007 Kansas UAV Symposium, Oct 3-5, 2007,
Salinas, KS
Donovan, W.R. and R.D. Hale. “The Development of an Uninhabited Aircraft System for
Remote Sensing in the Cryosphere, C11A-1127.” AGU Conference, San Francisco, CA, 11
December, 2006
Donovan, W.R. and R.D. Hale. “The Design of an Uninhabited Air Vehicle for Use in Polar
Research.” SAE 06GATC-77, SAE General Aviation Technology Conference, Wichita, KS. 30
August, 2006.
Anemaat, W., B. Kaushik, R.D. Hale and N. Ramabadran. “A Knowledge-Based Design
Framework for Aircraft Conceptual and Preliminary Design.” SAE 06GATC-75, SAE General
Aviation Technology Conference, Wichita, KS. 30 August, 2006.
Hale, R.D. “NSF Science and Technology Center for Remote Sensing of Ice Sheets (CReSIS),
An Introduction.” Unmanned Aerial Systems/Future Systems Symposium, Salinas, KS, 6
October, 2006.
Anemaat, W., B. Kaushik, R.D. Hale and N. Ramabadran. “A Knowledge-Based Design
Framework for Aircraft Conceptual and Preliminary Design.” AMRaven Users Group, Dayton,
OH, 6 June, 2006.
Hale, R.D., Landes, J.A. and Kaushik, P.B.R. “Structural Design and Simulation of
Ultralightweight technology for Research in Astronomy,” 47th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, Newport, Rhode Island, 1-4 May,
2006.
Landes, J., Hale, R.D. and Ewing, M. “Dynamic Structural Response of a Fiber Reinforced
Plastic Telescope Mirror,” Society for Experimental Mechanics IMAC XXIV, St. Louis,
Missouri USA, January 30 – February 2, 2006
xiii









Mathur, Guarov, R. Taghavi and R.D Hale. "A Computational and Experimental Analysis of the
Flow Around a Tractor-Trailer." FEDSM2005-77324, 2005 American Society for Mechanical
Engineers Fluids Engineering Summer Conference, June 19-23, 2005, Houston, TX.
Kaushik, B., R.D. Hale and R. Taghavi. "CFD Application for the Characterization of Surface
Pressures on Telescopes." FEDSM2005-77345, 2005 American Society for Mechanical
Engineers Fluids Engineering Summer Conference, June 19-23, 2005, Houston, TX.
Maletsky, L.P. and Hale, R.D. "The Practical Integration of Rapid Prototyping Technology into
Engineering Curricula," 2003 ASEE Midwest Section Meeting, 10 Sept. 2003.
Villa, M. and Hale, R.D. "Static and Dynamic Mechanical Influence of Fiber Waviness Textile
Composites," AIAA-2002-1223, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural
Dynamics and Materials Conference, Norfolk, VA, 7-10 April, 2003.
Hale, R.D. and Schueler, K. "Object Oriented Design and Analysis Tools for Fiber Placed and
Fiber Steered Structures," SAMPE 2002, May 12-16, 2002, Long Beach CA.
Hale, R.D. and Wiehn, M. "Low Cost Robotic Fabrication Methods for Tow Placement,"
SAMPE 2002, May 12-16, 2002, Long Beach CA.
Hale, R.D. and Moon, R. "Nondestructive Evaluation and Mechanical Testing of Steered Fiber
Composites," SAMPE 2002, May 13-16, 2002, Long Beach CA.
Hale, R.D., Moon, R., Lim, K., Schueler, K., Wiehn, M. "Current Progress on Integrated Design
and Analysis Tools for Fiber Steered Composites," AIAA-2002-1763, 43rd
AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference,
Denver, CO, 22-25 April, 2002.
Hale, R.D. and Schueler, K. "Object-Oriented Implementation of an Integrated Design and
Analysis Tool for Fiber Placed Structures," AIAA-2002-1223, 43rd
AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference,
Denver, CO, 22-25 April, 2002.

Hale, R.D. and Schueler, K. "Knowledge-Based Software Systems for Composite Design, Analysis and
Manufacturing," SAE 2002-01-1536, SAE General Aviation Technology Conference and Exposition,
April 16-18, 2002, Wichita KS.

Liu, Z., Fei, D., Dayal, V., Hsu, D.K. and Hale, R.D. "Ultrasonic NDE and Mechanical Testing
of Fiber Placement Composites." 28th Annual Review of Progress in Quantitative Nondestructive
Evaluation, Brunswick, ME, Jul 29-Aug. 3, 2001.
Hale, R.D. and Vasey-Glandon, V.M. "PACKS: An Affordable Knowledge-Driven Composite
Design for Manufacturing Process." SAMPE 2001, May 6-10, 2001, Long Beach CA.
Hale, R.D. "Integrated Design and Analysis Tools for Reduced Weight, Affordable Fiber Steered
Composites," Kansas State EPSCoR session, Kansas Statehouse, 6 February, 2001.
Vasey-Glandon, V.M. and Hale, R.D. “PACKS (Parametric Composite Knowledge System): An
Affordable Structural Definition Process for Composites”, 41st AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, Atlanta, GA, 3-6 April, 2000.
Vasey-Glandon, V.M. and Hale, R.D. "Parametric Composite Knowledge System (PACKS)
Application to Joint Strike Fighter at Boeing", 1998 Defense Manufacturing Conference, New
Orleans, LA, 30 Nov.- 3 Dec., 1998.
Hsu, D.K., Peters, J.J. and Hale, R.D. “Ultrasonic Imaging of Internal Structures of a Fiber
Steered Composite Panel,” Review of Progress in Quantitative Nondestructive Evaluation
Conference, Snowbird, VT, 19-24 July, 1998.
Hale, R.D. "Structural Optimization of Fiber Placed Parts," Advanced Fiber Placement Technical
Integration Conference, St. Louis, MO, 9-10 June, 1998.






xiv

Verhulst, M.A., Hale, R.D., West, A.C. and Adams, D.O. "Model Materials for
Experimental/Analytical Correlations of Textile Composites," SEM Spring Conference on
Experimental Mechanics, Bellevue, WA, 2-4 June, 1997, pp. 182-183.
Hale, R.D. and Hsu, D.K. "Ultrasonic NDE in Multi-Directionally Reinforced Textile
Composites," NSF Industry/University Fall Review, Ames, IA, 23-25 October, 1995.
Hale, R.D. and Adams, D.O. "Limitations of Moiré Interferometry Due to Free-Edge Strain
Effects in Textile Composites," 24th Midwest Mechanics Conference, Ames, IA, 2-4 October,
1995.
Hale, R.D., Hsu, D.K. and Adams, D.O. "Ultrasonic NDE Techniques and the Effects of Flaws
on Mechanical Performance in Multi-Dimensionally Reinforced Textile Composites," Review of
Progress in Quantitative Nondestructive Evaluation Conference, Seattle, WA, 31 July - 4 August,
1995.
Hale, R.D. and Adams, D.O. "Influence of Textile Composite Microstructure on Moiré
Interferometry Results," SEM Spring Conference on Experimental Mechanics, Grand Rapids,
MI, 12-14 June, 1995.
Hale, R.D. and Hsu, D.K. “Ultrasonic NDE of 3D Textile Composites,” Review of Progress in
Quantitative Nondestructive Evaluation Conference, Snowmass, CO, 1-5 August, 1994.
Hale, R.D. “Idealization of Fiber Architecture in Textile Composites,” 1994 International Student
Paper Competition, SEM Spring Conference on Experimental Mechanics, Baltimore, MD, 6
June, 1994.
Hale, R.D. and Hsu, D.K. "Ultrasonic NDE of 3D Composites -- A Preliminary Study," Review
of Progress in Quantitative Nondestructive Evaluation Conference, Brunswick, ME, 31 July - 5
August, 1993.







SELECTED DEPARTMENT SERVICE ACTIVITIES












Graduate advisor, Fall ’07, Summer ’08; 2010 – 2012
Chair, AE Strategic Planning Committee, Fall 2012-present
Member, AE Graduate Committee, Fall 2012-present
Undergraduate Scholarship Officer, Fall 2004 – Fall 2007
Facilitator/Mentor, Thematic Learning Community, Fall 2003 to 2010
Chair, AE Department Chair Search Committee, Fall 2001 to Spring 2002
AE Faculty search committee, Fall 2001 to Spring 2002, Fall 2006 to present
Incoming Freshman Advising/Orientation, Summer 2000, 2001, 2002.
Creation of new multidisciplinary composites lab, Fall 1998 to Fall 2000; Fall 2011-Spring 2013.
Creation of new multidisciplinary Nondestructive Evaluation lab, Fall 1998 to Spring 2000.
Department Scheduling Officer, Fall 1999 to Spring 2005
Advised potential students and families, and provided facilities tours. Fall 1998 to present.
SELECTED SCHOOL SERVICE ACTIVITIES







Member, LEEP2 Building Advisory Committee, Fall 2012 - present
Member, M2SEC Building Advisory Committee, Fall 2011 - present
Member, Numerous Search Committees, CReSIS faculty and staff
Member, Self Engineering Leadership Development Program Advisory Committee
Representative, Engineering Physics Advisory Board, Fall, 2004 – present.
Representative, School of Engineering Graduate Scholarship Committee, Fall, 2004 – Fall 2008
Representative, School of Engineering Undergraduate Scholarship Committee, Fall, 2004 – present.
xv













Chair, Transportation Research Institute director search committee, 2004, 2005.
Chair, Transportation Research Institute faculty search committee, 2003.
Representative, School of Engineering Library committee, 2003-2005.
Representative, School of Engineering Computer committee, 2003-2010
Representative, School of Engineering Computer committee, 2008-2010
Faculty Advisor, Tau Beta Pi Engineering Honor Society, Summer 2003
Guest lecturer, Duke TIP program, 2000-present
Facilitator, SWE Summer Discovery Program (Aerospace), 2000-2010
Guest lecturer, SWE Weekend of Engineering program, 2000-present
Creation of new multidisciplinary rapid prototyping lab, Spring 2002 to Fall 2002.
Member, College of Engineering Dean's Search Committee, Fall 2001 to Spring 2002
Member, Information Technology Task Force, Fall 2001 to 2010
Faculty Marshall, College of Engineering, 2000 Commencement, May 21,2000
SELECTED UNIVERSITY SERVICE ACTIVITIES


































Associate Director for Technology, NSF Center for Remote Sensing of Ice Sheets, Spring ’11 to present
Member, Conflict of Interest Committee, Fall 2010 to present
Member, Provost strategic planning steering committee, Fall 2010 to Spring 2012
Chair, University Senate Executive Committee, Fall ’06 – Spring ‘07
Member, Promotion and Tenure Task Force, Fall ’06 – Spring ‘07
Chair, Faculty
Faculty
Handbook
Task Force, Fall ’08 to present
Member,
DeanSenate,
Bell 5 yr
evaluation
committee
Chair,
Faculty
Senate
Research
Committee,
Fall
President, University Senate, Fall ’06 – Spring
‘072005 – Spring 2006
Chair, Classified Research Task Force, Fall, 2005 – Spring 2006
Member, Search Committee, Associate Vice Provost for Student Success, Fall 2005 – Spring 2006
Member, Center for Teaching Excellence Advisory Board, 2005-present
Representative, University Committee on Promotion and Tenure, 2004 – 2006
Representative, Student Success Priority Initiatives, Fall, 2004.
Facilitator, Thematic Learning Communities and the Residential Complex Director, 22 July, 2004
Facilitator, KU Teaching Summit, “General Education Goals and the Professional Schools,” 17 August,
2004
Facilitator, Writing in the Curriculum, A Visual Knowledge Project, CTE, 1 November, 2004
Elected Representative, University Senate Executive Committee, May ’04 – Spring ‘07
Guest Lecturer, GS804 (ethics in science and engineering), Fall ’07, Fall ‘08
Member, Chancellors Advisory Committee on Athletics 2009-2011 (Compliance Chair, 2011)
Member, University Senate Athletics Committee, 2009-2011
Member, Creative Campus Steering Committee, 2008-2010
Facilitator, Center for Teaching Excellence "Lunch and Conversation", Sept. 30, 2003.
Facilitator, KU Teaching Summit III breakout session, August 19, 2003
Representative, University Committee on Libraries, 2003 - 2006
Representative, Faculty Senate Research Committee, 2003 - 2006
Elected Representative, University/Faculty Councils, May 2003 – Spring ‘07
Invited Lecturer, Kansas Center for Advanced Scientific Computing, April 19, 2002.
Invited Lecturer, "About Teaching: A Conference for New GTA's," August 15, 2002.
Invited Lecturer, "About Teaching: A Conference for New GTA's," August 16, 2001.
Facilitator, Center for Teaching Excellence "Lunch and Conversation", March 14, 2001.
Member, Best Practices in Teaching Institute 2000, CTE, May 23-24, 2000.
Judge, Sigma Xi Student paper competition, Spring, 1999.
Guest lecturer, Haskell Indian Nations University Bridge Program, October 24, 2000.
Center for Teaching Excellence Ambassador, Spring 2001 to Spring 2007
SELECTED LOCAL/STATE/REGIONAL SERVICE ACTIVITIES
xvi

Chair, Education Committee, Friends of Lied, Fall 2007 to Spring 2008

Co-Chair, Advanced Materials and Medical Devices Hot Team, Kansas Bioscience Authority, 2005

Member, Friends of the Lied Advisory Board, 2005-2008.

Mentor, Olathe Northwest High School pre-Engineering Projects, 2004 – 2008.

South Junior High School Career Fair, April 20, 2000.

Invited Lecturer, "Flying in the New Millennium," Kansas Pilots Association, June 9-11, 2000.
SELECTED NATIONAL SERVICE ACTIVITIES

Member, Council of Visitors, NSF office of Polar Programs, Spring 2013

Session Chair, Design and Structures, SAE General Aviation Conference, 2006, 2008

Proposal Review, NSF Office of Polar Programs



Paper Review, AIAA Journal of Flight Mechanics.
Associate Director, Kansas NASA Space Grant Consortium, 2004 - present
Reviewer, Composites Part B.

Reviewer, AIAA Journal of Aircraft.

AFOSR Proposal Reviewer

Member, Peer Review Board, Journal of Advanced Materials

Reviewer, Sport Pilot

Conference paper reviewer for American Society for Engineering Education

Member, Aircraft Owners and Pilots Association

NSF proposal reviewer, Advanced Sensors Technology

Member, American Society for Engineering Education

Associate Fellow, American Institute for Aeronautics and Astronautics

Member, Tau Beta Pi
SELECTED INTERNATIONAL SERVICE ACTIVITIES

Session Chair, one session in structural mechanics, AIAA SDM, 2007, 2008

Session Chair, two sessions in structural mechanics, AIAA SDM, 2006

Member, AIAA Structures Technical Committee, 2005-present

Session Chair, two sessions in structural mechanics, AIAA SDM, 2005

Member, Phi Beta Delta, Honor Society for International Scholars, Fall '03 - present

Session Chair, Design and Analysis, SAMPE 2004, May 16-20, 2004.

Member, SAMPE Design and Analysis Technical Committee, 2003 – 2005

Journal Article Reviewer for Journal of Composite Materials
Text Reviewer for Bertoline/Weibe Fundamentals of Graphics Communication, 3rd Edition, McGrawHill, 2001.

xvii