WLAN ADSL2+ Router
Quick Installation Guide
Contents:
Ethernet Cable
Phone Cable
Power Supply
QIG
CD(Easy Setup software/Manual)
Warning:
This CD-ROM is only compatible with the following Operating systems:
Windows Vista Windows XP Windows 2000
Windows ME
Windows 98SE
 Non-Windows users to refer to the manual on CD:\fscommand\manual.pdf (where CD is the drive
letter of your CD-ROM drive. )
 Before proceeding with the installation of the WLAN ADSL2+ Router, your high-speed Broadband
service has to be available at your home. If this is not the case, you will have to wait until
Telecom/ISP has activated your service.
 You must subscribe to an Internet service provider's Broadband service. If you are in doubt as to
whether your Broadband service has been activated, please contact your internet service provider.
 Do not proceed with the installation of WLAN ADSL2+ Router before you have received a confirmation
email or letter from your Internet Service Provider, confirming that your Broadband service is available.
This letter will give you the username and password for your Broadband connection. Without them,
you will not be able to configure your WLAN ADSL2+ Router correctly.
 Before proceeding with the installation please ensure: That any installed firewall and anti-virus
protection software be disabled during installation. That any other open applications be closed during
installation.
Step 1: AUTO RUN CD
Insert the CD into your CD-ROM drive. The CD should auto-start. If it does not start, click on Start ->
Run and type in CD:\ Autorun.exe (where CD is the drive letter of your CD-ROM drive.) There are Five
options: Hardware Installation, Easy Setup, Advanced Configuration, User Manual and Exit.
Step 2: Hardware Installation
This Hardware Installation will show you how to connect your WLAN ADSL2+ Router, please follow
steps to complete the Hardware Installation.
Step 3: Easy Setup
This Easy Setup is a User-friendly program for configuring basic functions. It also has a diagnose
function to assist with fault location. The Easy Setup is typically used to help you setup your own ADSL
account. Please follow the instructions to setup your own ADSL account.
Step 4: Advanced Configuration
This Advanced Configuration is to configure your WLAN ADSL2+ Router in detail, please refer to the
manual in detail.
Step5: User Manual
This is a detailed manual describing all the features and various configurations available on the
WLAN ADSL2+ Router.
Wireless Setup
Step 1. A desktop computer, laptop or Pocket PC must have a WiFi card (802.11b/g) already
installed. Follow the instructions on how to connect to a WiFi access point as indicated in the user
manual of the installed WiFi card.
Step 2. Set the Wifi card as follows:
-SSID to RTL867x-ADSL (Not required on cards supporting Automatic SSID)
-Encryption: None
Note:
Be sure your network card is set to obtain IP address and DNS automatically (The built-in DHCP
inside the WLAN ADSL2+ Router will assign an IP) For the best results, WLAN ADSL2+ Router
should be placed:
Near the center of the area in which the PCs will operate. In an elevated location such as a high shelf
for better coverage.
Away from other sources of interference, such as, microwaves, and 2.4 GHz cordless phones.
Away from large metal surfaces. If using multiple access points, it is better not to use adjacent radio
frequency Channels to reduce interference. Example: use Channels 1, 3, 5, 7,…. or 2,4,6,… The
time it takes to establish a wireless connection can vary depending on both your Security settings
and location of the WLAN ADSL2+ Router placement.
Hardware Connections