ISO Update Supplement to ISO Focus+ May 2013 International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 April to 30 April 2013 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. COPOLCO Committee on consumer policy ISO/IEC CD Guide 50 Safety aspects — Guidelines for child safety TC 17 Steel ISO/CD 18203 Steels — Determination of the thickness of surface-hardened layers TC 20 Aircraft and space vehicles ISO/CD 16164 Space Systems — Disposal of satellites operating in or crossing Low Earth Orbit TC 22 Road vehicles ISO/CD 142297 Road vehicles — Unified diagnostic services (UDS) — Part 7: Unified diagnostic services on Local Interconnect Network implementation (UDSonLIN) ISO/CD 17840 Road vehicles — Vehicle extrication card / Rescue Sheet TC 23 Tractors and machinery for agriculture and forestry ISO/CD 3600 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and presentation TC 38 Textiles ISO/CD 18074 Textiles — Identification of some animal fibres by DNA analysis method- Cashmere, wool, yak and their blends TC 41 Pulleys and belts (including veebelts) ISO/CD 13050 Curvilinear toothed synchronous belt drive systems TC 42 Photography ISO/CD 17850 Photography — Digital cameras — Geometric distortion (GD) measurements TC 45 Rubber and rubber products ISO/DTS 16095 Reclaimed rubber derived from products containing mainly natural rubber — Evaluation procedure ISO/DTS 16096 Reclaimed isobutene-isoprene (IIR) rubber — Evaluation procedure TC 48 Laboratory equipment ISO/CD 384 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments ISO/CD 3819 Laboratory glassware — Beakers ISO/CD 4796-1 Laboratory glassware — Bottles — Part 1: Screw-neck bottles ISO/CD 16496 Laboratory glassware — Devices with vacuum-jacket insulation TC 58 Gas cylinders ISO 111192:2012/CD Amd 1 Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners — Amendment 1 TC 61 Plastics ISO/DTR 17801 Standard table for reference global solar spectral irradiance at sea level — Horizontal, relative air mass 1 ISO/DTR 18486 Plastics — Calculation of the goodness of fit of the spectral distribution of a solar simulator to a reference solar spectral distribution ISO/CD 182631 Plastics — Mixed polypropylene (PP) and polyethylene (PE) recyclate — Part 1: Designation system and basis for specifications ISO/CD 182632 Plastics — Mixed polypropylene (PP) and polyethylene (PE) recyclate — Part 2: Preparation of test specimens and determination of properties TC 68 Financial services ISO/CD 128125 Mobile Financial Services — Part 5: Mobile Person-to-Business Payments ISO/CD 128126 Mobile Financial Services — Part 6: General Mobile Banking operations TC 71 Concrete, reinforced concrete and pre-stressed concrete ISO/CD 177851 Test Methods for Pervious Concrete — Part 1: Permeability TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use ISO/CD 1135-4 Transfusion equipment for medical use — Part 4: Transfusion sets for single use ISO/CD 1135-5 Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus TC 79 Light metals and their alloys ISO/CD 16374 Evaluation method for cleanness of magnesium and magnesium alloy ingots TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO/CD 127493 Nuclear energy — Vocabulary — Part 3: Nuclear fuel cycle ISO/CD 8769 Reference sources — Calibration of surface contamination monitors — Alpha-, beta- and photon emitters ISO/CD 185892 Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples TC 94 Personal safety -- Protective clothing and equipment ISO/CD 135061 Protective clothing against heat and flame — Part 1: Test method for complete garments — Prediction of absorbed energy using an instrumented manikin ISO/CD 1690014 Respiratory protective devices — Methods of test and test equipment — Part 14: Measurement of sound level ISO/CD 169751 Respiratory protective devices — Part 1: Selection, use and maintenance TC 96 Cranes ISO/CD 4302 Cranes — Wind load assessment TC 104 Freight containers ISO/CD 181853 Freight containers — Electronic seals — Part 3: Environmental characteristics TC 107 Metallic and other inorganic coatings ISO/CD 11177 Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing TC 110 Industrial trucks ISO/CD 115254 Rough-terrain trucks — User requirements — Part 4: Requirements for trucks operating with freely swinging loads ISO/CD 115255 Rough-terrain trucks — User requirements — Part 5: Interface between rough-terrain truck and integrated personnel work platform ISO/CD 184792 Rough-terrain trucks — Non-integrated personnel work platforms — Part 2: User requirements TC 113 Hydrometry ISO/DTR 11651 Estimation of sediment deposition in reservoir using one dimensional simulation models ISO/DTR 13973 Artificial recharge to groundwater TC 146 Air quality ISO/CD 17621 Workplace atmospheres — Short term detector tube measurement systems — Requirements and test methods TC 165 Timber structures ISO/CD 18324 Timber structures — Test methods — Floor vibration TC 173 Assistive products for persons with disability ISO/CD 7176-8 Wheelchairs — Part 8: Requirements and test methods for static, impact and fatigue strengths ISO/CD 1684011 Wheelchair seating — Part 11: The determination of perspiration dissipation characteristics of seat cushions intended to manage tissue integrity TC 206 Fine ceramics ISO/CD 17162 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of monolithic ceramics at room temperature — Determination of compressive strength ISO/CD 17170 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for sphere indentation of porous ceramics TC 219 Floor coverings ISO/CD 16905 Resilient floor coverings — Specification for rubber floor covering — Tile/Plank ISO/CD 16906 Resilient Floor Covering — Determination of seam strength ISO/DPAS 18167 Textile floor coverings — Installation practice TC 223 Societal security ISO/DTR 22351 Societal security — Emergency management — Message structure for exchange of information TC 244 Industrial furnaces and associated processing equipment ISO/CD 135773 Industrial furnace and associated processing equipement — Safety — Part 3: Generation and use of protective and reactive atmosphere gases TC 258 Project, programme and portfolio management ISO/CD 21502 Project and Programme Portfolio Management JTC 1 Information technology ISO/IEC 147632:2012/PDAM 1 Information technology — Implementation and operation of customer premises cabling — Part 2: Planning and installation — Amendment 1 ISO/IEC 23008-2/PDAM 1 Information technology — High efficiency coding and media delivery in heterogeneous environments ISO/IEC 23008-2/PDAM 2 Information technology — High efficiency coding and media delivery in heterogeneous environments ISO/IEC CD 23008-5 Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding — Amendment 1: Range extensions — Part 2: High efficiency video coding — Amendment 2: Multiview extensions — Part 5: HEVC Conformance testing and reference software ISO/IEC CD 24769-61 Information Technology — Real Time Locating System (RTLS) Device Conformance Test Methods — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface ISO/IEC CD 24769-62 Information Technology — Real Time Locating System (RTLS) Device Conformance Test Methods — Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface ISO/IEC CD 24770-61 Information technology — Real Time Locating Systems (RTLS) device performance test methods — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface ISO/IEC CD 24770-62 Information technology — Real Time Locating Systems (RTLS) device performance test methods — Part 62: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface DIS circulated Period from 01 April to 30 April 2013 These documents have obtained substantial support within the appropriate ISO technical committee. They have been submitted to the ISO member bodies for voting by the date shown. * Available in English only Vote terminates COPOLCO Committee on consumer policy ISO/IEC DGuide 51 Safety aspects — Guidelines for their inclusion in standards 2013-08-17 (Revision of ISO/IEC Guide 51:1999) TC 17 ISO/DIS 683-4 Steel * Heat-treatable steels, alloy steels and free-cutting steels — Part 4: Free-cutting steels 2013-07-03 (Revision of ISO 683-9:1988) ISO/DIS 68318 * Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products 2013-07-05 (Revision of ISO 683-18:1996) TC 20 ISO/DIS 11077 Aircraft and space vehicles * Aerospace — Self-propelled de-icing/anti-icing vehicles — Functional requirements 2013-07-18 (Revision of ISO 11077:1993) ISO/DIS 8278 * Aerospace — Hydraulic, pressure compensated, variable delivery pumps — General requirements 2013-07-17 (Revision of ISO 8278:1986) ISO/DIS 9206 * Aerospace — Constant displacement hydraulic motors — General specifications 2013-07-04 (Revision of ISO 9206:1990) TC 22 Road vehicles ISO/DIS 882010 * Road vehicles — Fuse-links — Part 10: Fuse-links with tabs Type L (high current miniature) ISO/DIS 11451-3 * Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation 2013-07-25 (Revision of ISO 11451-3:2007) ISO/DIS 16845-2 * TC 24 ISO/DIS Road vehicles — Controller area network (CAN) — Conformance test plan — Part 2: High-speed medium access unit with selective wake-up functionality — Conformance test plan Particle characterization including sieving * Particle size analysis — Image analysis methods — Part 1: Static image analysis methods 2013-07-20 13322-1.2 2013-06-23 (Revision of ISO 13322-1:2004) TC 28 ISO/DIS 17196 Petroleum products and lubricants * Dimethyl ether (DME) for fuels — Determination of impurities — Gas chromatographic method 2013-07-09 ISO/DIS 17197 * Dimethyl ether (DME) for fuels — Determination of water content — Karl Fischer titration method 2013-07-09 ISO/DIS 17198 * Dimethyl ether (DME) for fuels — Determination of total sulfur, ultraviolet fluorescence method 2013-07-09 ISO/DIS 17786 * Dimethyl ether (DME) for fuels — Determination of evaporation residues — Mass analysis method 2013-07-09 TC 31 ISO/DIS 42501 Tyres, rims and valves * Earth-mover tyres and rims — Part 1: Tyre designation and dimensions 2013-07-13 (Revision of ISO 4250-1:2006) ISO/DIS 42502 * Earth-mover tyres and rims — Part 2: Loads and inflation pressures 2013-07-13 (Revision of ISO 4250-2:2006) TC 34 ISO/DIS 2451 Food products * Cocoa beans — Specification 2013-07-06 (Revision of ISO 2451:1973) ISO/DIS 66471 * Rice — Determination of amylose content — Part 1: Reference method 2013-09-12 (Revision of ISO 6647-1:2007) ISO/DIS 66472 * Rice — Determination of amylose content — Part 2: Routine methods 2013-09-12 (Revision of ISO 6647-2:2007) ISO/DIS 89681 * Milk and milk products - Determination of nitrogen content and crude protein calculation — Part 1: Kjeldahl principle 2013-09-05 (Revision of ISO 5549:1978, ISO 8968-1:2001, ISO 8968-2:2001) ISO/DIS 16649-3 * Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of betaglucuronidase-positive Escherichia coli — Part 3: Detection and most probable number technique using 5bromo-4-chloro-3-indolyl-beta-D-glucuronide 2013-09-19 (Revision of ISO/TS 16649-3:2005) ISO 5555:2001/DA md 1 * ISO/DIS * Animal and vegetable fats and oils — Sampling — Amendment 1 2013-09-19 Determination of individual and total sterols contents — Gas chromatographic method — Part 1: Animal 12228-1 and vegetable fats and oils 2013-09-26 (Revision of ISO 12228:1999) TC 38 ISO/DIS 16533 Textiles * Textiles — Measurement of exothermic and endothermic properties of textiles under humidity change 2013-07-13 TC 42 ISO/DIS 18943 Photography * Imaging materials — Magnetic hard drives used for image storage — Care and handling 2013-07-30 ISO/DIS 18944 * Imaging materials — Reflection colour photographic prints — Test print construction and measurement 2013-07-23 (Revision of ISO 18944:2012) TC 43 Acoustics ISO/DIS 12913-1 * ISO 101403:2010/DAmd 1 * 2013-07-23 TC 44 ISO/DIS 17533 Acoustics — Soundscape — Part 1: Definition and conceptual framework Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation — Amendment 1 2013-09-05 Welding and allied processes * Welding for aerospace applications — Welding data in design documents 2013-07-23 TC 45 ISO/DIS 1823 Rubber and rubber products * Rubber hose assemblies for oil suction and discharge service — Specification (Revision of ISO 1823-1:1997, ISO 1823-2:1997) ISO/DIS 249 * Rubber, raw natural — Determination of dirt content 2013-07-20 (Revision of ISO 249:1995) ISO/DIS 1656 * Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content 2013-07-20 (Revision of ISO 1656:1996) ISO/DIS 61013 * Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content 2013-07-20 (Revision of ISO 6101-3:1997) ISO/DIS 61014 * Rubber — Determination of metal content by atomic absorption spectrometry — Part 4: Determination of manganese content 2013-07-20 (Revision of ISO 6101-4:1997) ISO/DIS 124 * Latex, rubber — Determination of total solids content 2013-07-06 (Revision of ISO 124:2011) ISO/DIS 976 * Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH 2013-07-06 (Revision of ISO 976:1996, ISO 976:1996/Amd 1:2006) ISO/DIS 2322 * Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures 2013-07-09 (Revision of ISO 2322:2009) ISO/DIS 2393 * Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures 2013-07-09 (Revision of ISO 2393:2008) ISO/DIS 2476 * Butadiene rubber (BR) — Solution-polymerized types — Evaluation procedures 2013-07-09 (Revision of ISO 2476:2009) ISO/DIS 3385.2 * Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding 2013-06-19 (Revision of ISO 3385:1989) TC 46 ISO/DIS 16439 Information and documentation * Methods and procedures for assessing the impact of libraries 2013-07-27 TC 54 ISO/DIS 3064 Essential oils * Essential oil of petitgrain, Paraguayan type (Citrus aurantium L. ssp. aurantium, syn. Citrus aurantium L. ssp. amara var. pumilia) 2013-07-18 (Revision of ISO 3064:2000) TC 58 ISO/DIS 10286 Gas cylinders * Gas cylinders — Terminology 2013-09-26 (Revision of ISO 10286:2007) ISO/DIS 11118.2 * Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods 2013-06-27 (Revision of ISO 11118:1999) TC 61 ISO/DIS 13927 Plastics * Plastics — Simple heat release test using a conical radiant heater and a thermopile detector 2013-09-19 (Revision of ISO 13927:2001) ISO/DIS 17223 * Plastics — Determination of yellowness index and change in yellowness index 2013-07-09 ISO/DIS 22007-6 * TC 69 ISO/DIS 78701 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique 2013-07-09 Applications of statistical methods * Control charts — Part 1: General guidelines 2013-07-30 (Revision of ISO 7870-1:2007) TC 83 ISO/DIS 11110 Sports and recreational equipment * Winter-sports equipment — Test devices for the setting of the functional unit ski/boot/binding — Requirements and tests 2013-07-03 (Revision of ISO 11110:1997) ISO/DIS 13992 * Alpine touring ski-bindings — Requirements and test methods 2013-07-03 (Revision of ISO 13992:2006) TC 85 ISO/ASTM DIS 51956 Nuclear energy, nuclear technologies, and radiological protection * Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing (Revision of ISO/ASTM 51956:2005) ISO/ASTM DIS 52628 * ISO/ASTM DIS 52701 * 2013-07-19 TC 91 Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing 2013-07-19 Surface active agents ISO/DIS 17293-1 * ISO/DIS 17293-2 * TC 94 ISO/DIS 11611.2 Standard practice for dosimetry in radiation processing Surface active agents — Determination of chloroacetic acid (chloroacetate) in surfactants — Part 1: HPLC method 2013-07-30 Surface active agents — Determination of chloroacetic acid (chloroacetate) in surfactants — Part 2: Ionic Chromatographic method 2013-07-30 Personal safety -- Protective clothing and equipment * Protective clothing for use in welding and allied processes 2013-06-26 (Revision of ISO 11611:2007) ISO/DIS 11612.2 * Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements 2013-06-26 (Revision of ISO 11612:2008) ISO/DIS 14116.2 * Protective clothing — Protection against heat and flame — Limited flame spread materials, material assemblies and clothing (Revision of ISO 14116:2008, ISO 14116:2008/Cor 1:2009) TC 102 Iron ore and direct reduced iron 2013-06-26 ISO/DIS 16742 * Iron ores — Sampling of slurries 2013-07-06 TC 106 Dentistry ISO/DIS 16443 Dentistry — Vocabulary of oral implantology 2013-09-26 ISO/DIS 11499 * Dentistry — Single-use cartridges for local anaesthetics 2013-09-19 (Revision of ISO 11499:2007) ISO/DIS 17730 * Dentistry - Fluoride Varnishes 2013-09-05 TC 108 ISO/DIS 16063-16 Mechanical vibration, shock and condition monitoring * Methods for the calibration of vibration and shock transducers — Part 16: Calibration by Earth's gravitation 2013-07-13 (Revision of ISO 5347-5:1993) TC 121 ISO/DIS 17256 Anaesthetic and respiratory equipment * Anaesthetic and respiratory equipment — Respiratory therapy tubing and connectors 2013-07-27 ISO/DIS 11197.2 * Medical supply units 2013-06-05 (Revision of ISO 11197:2004) ISO/DIS 16571.2 * 2013-06-19 TC 130 ISO/DIS 12647-5 Systems for evacuation of plume generated by medical devices Graphic technology * Graphic technology — Process control for the manufacture of half-tone colour separations, proof and production prints — Part 5: Screen printing 2013-07-23 (Revision of ISO 12647-5:2001) ISO/DIS 15341 * Graphic technology — Method for Radius Determination of Printing Cylinders 2013-07-20 TC 131 ISO/DIS 10771-1 Fluid power systems * Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 1: Test method 2013-07-30 (Revision of ISO 10771-1:2002) TC 135 ISO/DIS 18563-1 TC 138 Non-destructive testing * Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 1: Instruments Plastics pipes, fittings and valves for the transport of fluids 2013-09-12 ISO/DIS 15494 * Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE) and polypropylene (PP) — Specifications for components and the system — Metric series 2013-09-05 (Revision of ISO 15494:2003) ISO/DIS 7509 * Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure 2013-07-13 (Revision of ISO 7509:2000) TC 142 ISO/DIS 15957 Cleaning equipment for air and other gases * Loading dusts for testing air cleaning equipment 2013-09-05 TC 146 Air quality ISO/DIS 14385-1 * ISO/DIS 14385-2 * TC 147 ISO/DIS 16780 Stationary source emissions — Green house gases — Part 1: Calibration of automated measuring systems 2013-07-23 Stationary source emissions — Green house gases — Part 2: Ongoing quality control of automated measuring systems 2013-07-23 Water quality * TC 150 Water Quality — Determination of polychlorinated naphthalenes (PCN) — Method using gas chromatography (GC) and mass spectrometry (MS) 2013-07-09 Implants for surgery ISO/DIS 13179-1.2 * ISO/DIS 14708-1 * Implants for surgery - Plasma-sprayed unalloyed titanium coatings on surgical implants — Part 1: General requirements 2013-06-23 Implants for surgery — Active implantable medical devices — Part 1: General requirements for safety, marking and for information to be provided by the manufacturer 2013-07-23 (Revision of ISO 14708-1:2000) TC 161 ISO/DIS 23551-5 Control and protective devices for gas and/or oil burners and appliances * TC 163 ISO/DIS 98691 Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 5: Manual gas valves 2013-07-05 Thermal performance and energy use in the built environment * Thermal insulation — Building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 1: Heat flow meter method 2013-07-09 (Revision of ISO 9869:1994) TC 164 ISO/DIS 68923 Mechanical testing of metals * Metallic materials — Tensile testing — Part 3: Method of test at low temperature 2013-09-05 (Revision of ISO 15579:2000) ISO/DIS 75001 * Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system (Revision of ISO 7500-1:2004, ISO 7500-1:2004/Cor 1:2008) 2013-09-05 TC 171 Document management applications ISO/DIS 12653-3 * ISO/DIS 12651-2 * Electronic imaging — Test target for scanning of office documents — Part 3: Test target for use in lower resolution applications 2013-06-19 Electronic imaging — Vocabulary — Part 2: Document workflow 2013-07-20 (Revision of ISO 12651:1999) TC 172 ISO/DIS 17411 ISO/DIS 11978 Optics and photonics * * Optics and photonics — Optical materials and components — Test method for homogeneity of optical glasses by laser interferometry 2013-07-16 Ophthalmic optics — Contact lenses and contact lens care products — Labelling 2013-09-12 (Revision of ISO 11978:2000) ISO/DIS 11979-6 * Ophthalmic implants — Intraocular lenses — Part 6: Shelf-life and transport stability 2013-09-26 (Revision of ISO 11979-6:2007) ISO/DIS 13212 * Ophthalmic optics — Contact lens care products — Guidelines for determination of shelf-life 2013-09-26 (Revision of ISO 13212:2011) Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery IEC/DIS 80601-2-58 2013-07-17 (Revision of IEC 80601-2-58:2008) ISO/DIS 11151-1 * Lasers and laser-related equipment — Standard optical components — Part 1: Components for the UV, visible and near-infrared spectral ranges 2013-09-19 (Revision of ISO 11151-1:2000) ISO/DIS 11151-2 * Lasers and laser-related equipment — Standard optical components — Part 2: Components for the infrared spectral range 2013-09-19 (Revision of ISO 11151-2:2000) TC 181 Safety of toys ISO 81241:2012/DAmd 2 * ISO 81241:2012/DAmd 3 * ISO 81244:2010/DAmd 2 * TC 182 ISO/DIS 17892-1 Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 2: Impaction and impalement hazards 2013-07-03 Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 3: Cords 2013-07-09 Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 2: Paddling pools 2013-07-03 Geotechnics * Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content 2013-09-12 (Revision of ISO/TS 17892-1:2004, ISO/TS 17892-1:2004/Cor 1:2006) ISO/DIS 17892-2 * Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of density of fine-grained soil 2013-09-12 (Revision of ISO/TS 17892-2:2004, ISO/TS 17892-2:2004/Cor 1:2006) TC 189 ISO/DIS 10545-4 Ceramic tile * Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength 2013-09-26 (Revision of ISO 10545-4:2004) ISO/DIS 10545-8 * Ceramic tiles — Part 8: Determination of linear thermal expansion 2013-09-26 (Revision of ISO 10545-8:1994) TC 190 Soil quality ISO/DIS 14388-3 * ISO/DIS 17182 * ISO/DIS 18227 * Soil quality - Acid-base accounting procedure for acid sulfate soils — Part 3: Suspension peroxide oxidation combined acidity and sulfur (SPOCAS) suite analysis 2013-07-23 Soil quality — Determination of some selected phenols and chlorophenols — Gas chromatographic method with mass spectrometric detection 2013-07-12 Soil quality — Determination of elemental composition by X-ray fluorescence 2013-07-23 ISO/DIS 16198 * Soil quality — Plant-based biotest to assess the environmental bioavailability of trace elements to plants 2013-09-19 TC 192 ISO/DIS 19372 Gas turbines * Microturbines applications — Safety 2013-07-03 TC 193 ISO/DIS 16960 Natural gas * TC 204 ISO/DIS 21217 Natural gas — Determination of sulfur compounds — Determination of total sulfur by oxidative microcoulometry method 2013-09-19 Intelligent transport systems * Intelligent transport systems — Communications access for land mobiles (CALM) — Architecture 2013-07-17 (Revision of ISO 21217:2010) TC 209 ISO/DIS 14644-12 Cleanrooms and associated controlled environments * TC 213 ISO 4287:1997/DA md 2 Cleanrooms and associated controlled environments — Part 12: Classification of air cleanliness by nanoscale particle concentration 2013-09-05 Dimensional and geometrical product specifications and verification * Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters — Amendment 2: Parameters Xsm and Xc 2013-09-12 TC 215 ISO/DIS 22077-1 Health informatics * Health informatics — Medical waveform format — Part 1: Encoding rules 2013-07-27 (Revision of ISO/DIS 11073-92001) TC 226 ISO/DIS 18142 ISO/DIS 23201 Materials for the production of primary aluminium * * TC 232 ISO/DIS 29991-1 * Aluminium oxide primarily used for production of aluminium — Determination of trace elements — Wavelength dispersive X-ray fluorescence spectrometric method 2013-07-09 Language learning services outside formal education — Requirements — Part 1: 2013-07-06 Traditional chinese medicine * Traditional Chinese medicine — Ginseng seeds and seedlings — Part 1: Panax ginseng CA Meyer 2013-07-06 TC 261 Additive manufacturing ISO/DIS 17296-3 * ISO/DIS 17296-4 * Additive manufacturing — Rapid technologies (rapid prototyping) — Part 3: Test methods 2013-07-05 Additive manufacturing — Rapid technologies (rapid prototyping) — Part 4: Data processing 2013-07-05 IULTCS ISO/DIS 15701 2013-07-09 Learning services outside formal education TC 249 ISO/DIS 17217-1 Carbonaceous materials for the production of primary aluminium — Baked carbon bodies — Determination of the dynamic elasticity modolus by the resonance method International Union of Leather Technologists and Chemists Societies * Leather - Tests for colour fastness - Part IUF 442 rev: Colour fastness to migration into polymeric material 2013-09-26 (Revision of ISO 15701:1998) JTC 1 ISO/IEC DIS 2382 Information technology * Information technology — Vocabulary 2013-07-16 (Revision of ISO/IEC 2382-1:1993, ISO 2382-2:1976, ISO 2382-3:1987, ISO 2382-6:1987, ISO/IEC 23827:2000, ISO/IEC 2382-8:1998, ISO 2382-12:1988, ISO/IEC 2382-13:1996, ISO/IEC 2382-14:1997, ISO/IEC 2382-15:1999, ISO/IEC 2382-16:1996, ISO 2382-19:1989, ISO/IEC 2382-20:1990, ISO 238221:1985, ISO/IEC 2382-23:1994, ISO/IEC 2382-24:1995, ISO/IEC 2382-25:1992, ISO/IEC 2382-26:1993, ISO/IEC 2382-27:1994, ISO/IEC 2382-28:1995, ISO/IEC 2382-29:1999, ISO/IEC 2382-9:1995, ISO/IEC 2382-31:1997, ISO/IEC 2382-32:1999, ISO/IEC 2382-34:1999, ISO/IEC 2382-18:1999, ISO/IEC 23824:1999, ISO/IEC 2382-5:1999, ISO/IEC 2382-17:1999, ISO/IEC 2382-36:2008, ISO/IEC 2382-37:2012, ISO/IEC 2382-36:2008/Cor 1:2012, ISO/IEC 2382-36:2008/DAmd 1) ISO/IEC 144432:2010/DAmd 5 * ISO/IEC DIS 24759 * Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2: Radio frequency power and signal interface — Amendment 5: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC 2013-07-17 Information technology — Security techniques — Test requirements for cryptographic modules 2013-07-05 (Revision of ISO/IEC 24759:2008) ISO/IEC 13818-1/DAmd 4 * ISO/IEC 144963:2009/DAmd 4 * ISO/IEC 1449612:2012/DAmd 2 * ISO/IEC 1449616:2011/DAmd 2 * ISO/IEC 1449626:2010/DAmd 3 * ISO/IEC DIS 14496-30 * ISO/IEC 1544412:2012/DAmd 2 * ISO/IEC DIS 13250-3 * Information technology — Generic coding of moving pictures and associated audio information: Systems — Part 1: — Amendment 4: Support for event signalling in Transport Stream in MPEG-2 systems 2013-07-09 Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 4: New levels for AAC profiles 2013-07-13 Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Amendment 2: Carriage of timed text and other visual overlay 2013-07-09 Information technology — Coding of audio-visual objects — Part 16: Animation Framework eXtension (AFX) — Amendment 2: Multi-resolution 3D mesh compression 2013-07-13 Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Amendment 3: Conformance for Low Delay AAC v2 profile 2013-07-09 Information technology — Coding of audio-visual objects — Part 30: Timed Text and other visual overlays in ISO Base Media File Format 2013-07-24 Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Amendment 2: Carriage of timed text and other visual overlays 2013-07-09 Information technology — Topic Maps — Part 3: XML syntax 2013-07-06 (Revision of ISO/IEC 13250-3:2007) FDIS circulated Period from 01 April to 30 April 2013 These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown * Available in English only Vote terminates TC 4 ISO/FDIS Rolling bearings * Rolling bearings — Single-row angular contact ball bearings — Chamfer dimensions for outer ring non- 12044 thrust side 2013-06-03 (Revision of ISO 12044:1995) TC 6 ISO/FDIS 10775 Paper, board and pulps * Paper, board and pulps — Determination of cadmium content — Atomic absorption spectrometric method 2013-06-23 (Revision of ISO 10775:1995) TC 17 ISO/FDIS 4967 Steel * Steel — Determination of content of nonmetallic inclusions — Micrographic method using standard diagrams 2013-06-05 (Revision of ISO 4967:1998) TC 20 ISO/FDIS 14186 Aircraft and space vehicles * 2013-06-18 TC 21 ISO/FDIS 7240-14 Air cargo — Fire containment covers — Design, performance and testing requirements Equipment for fire protection and fire fighting * Fire detection and alarm systems — Part 14: Design, installation, commissioning and service of fire detection and fire alarm systems in and around buildings 2013-06-23 (Revision of ISO/TR 7240-14:2003) TC 23 ISO/FDIS 5395-1 Tractors and machinery for agriculture and forestry * Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests 2013-06-19 (Revision of ISO 5395:1990, ISO 5395:1990/Amd 1:1992) ISO/FDIS 5395-2 * Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers 2013-06-19 (Revision of ISO 5395:1990, ISO 5395:1990/Amd 1:1992) ISO/FDIS 5395-3 * Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator 2013-06-19 (Revision of ISO 5395:1990, ISO 5395:1990/Amd 1:1992) TC 24 ISO/FDIS 26824 Particle characterization including sieving * 2013-06-13 TC 27 ISO/FDIS 17247 Particle characterization of particulate systems — Vocabulary Solid mineral fuels * Coal — Ultimate analysis 2013-06-06 (Revision of ISO 17247:2005, ISO 17247:2005/Cor 1:2006) TC 28 ISO/FDIS 9038 Petroleum products and lubricants * Determination of sustained combustibility of liquids 2013-06-12 (Revision of ISO 9038:2002) ISO/FDIS 9162 * Petroleum products — Fuels (class F) — Liquefied petroleum gases — Specifications 2013-06-06 (Revision of ISO 9162:1989) TC 29 ISO/FDIS 883 Small tools * Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions 2013-06-09 (Revision of ISO 883:1985) ISO/FDIS 6262-1 * End mills with indexable inserts — Part 1: End mills with flatted parallel shank 2013-06-09 (Revision of ISO 6262-1:1982) ISO/FDIS 6262-2 * End mills with indexable inserts — Part 2: End mills with Morse taper shank 2013-06-09 (Revision of ISO 6262-2:1982) ISO/FDIS 6986 * Side and face milling (slotting) cutters with indexable inserts — Dimensions 2013-06-09 (Revision of ISO 6986:1983) ISO/FDIS 7755-1 * Hardmetal burrs — Part 1: General specifications 2013-06-23 (Revision of ISO 7755-1:1984) ISO/FDIS 7755-2 * Hardmetal burrs — Part 2: Cylindrical burrs (style A) 2013-06-23 (Revision of ISO 7755-2:1984) ISO/FDIS 7755-3 * Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C) 2013-06-23 (Revision of ISO 7755-3:1984) ISO/FDIS 7755-4 * Hardmetal burrs — Part 4: Spherical burrs (style D) 2013-06-23 (Revision of ISO 7755-4:1984) ISO/FDIS 7755-5 * Hardmetal burrs — Part 5: Oval burrs (style E) 2013-06-23 (Revision of ISO 7755-5:1984) ISO/FDIS 7755-6 * Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F) 2013-06-23 (Revision of ISO 7755-6:1984) ISO/FDIS 7755-7 * Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G) 2013-06-23 (Revision of ISO 7755-7:1984) ISO/FDIS 7755-8 * Hardmetal burrs — Part 8: Flame burrs (style H) 2013-06-23 (Revision of ISO 7755-8:1984) ISO/FDIS 7755-9 * Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K) 2013-06-23 (Revision of ISO 7755-9:1984) ISO/FDIS 7755-10 * Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L) 2013-06-23 (Revision of ISO 7755-10:1984) ISO/FDIS 7755-11 * Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M) 2013-06-23 (Revision of ISO 7755-11:1984) ISO/FDIS 7755-12 * Hardmetal burrs — Part 12: Inverted cone burrs (style N) 2013-06-23 (Revision of ISO 7755-12:1984) TC 34 Food products ISO 91671:1992/FDAmd 1 * ISO/FDIS 5527 * Rapeseed — Determination of glucosinolates content — Part 1: Method using high-performance liquid chromatography — Amendment 1 2013-06-05 Cereals — Vocabulary 2013-07-03 (Revision of ISO 5527:1995) ISO/FDIS 4833-1 * Microbiology of food and animal feed — Horizontal method for the enumeration of microorganisms — Part 1: Colony count at 30 degrees C by the pour plate technique 2013-06-26 (Revision of ISO 4833:2003) ISO/FDIS 4833-2 * ISO/FDIS 3657 * Microbiology of food and animal feed — Horizontal method for the enumeration of microorganisms — Part 2: Colony count at 30 degrees C by the surface plating technique 2013-06-26 Animal and vegetable fats and oils — Determination of saponification value 2013-06-05 (Revision of ISO 3657:2002) ISO/FDIS 3961 * Animal and vegetable fats and oils — Determination of iodine value 2013-06-05 (Revision of ISO 3961:2009) TC 38 Textiles ISO/FDIS 1833-25 * ISO/FDIS 13015 * Textiles — Quantitative chemical analysis — Part 25: Mixtures of polyester and certain other fibres (method using trichloracetic acid and chloroform) 2013-06-26 Woven fabrics — Distortion — Determination of skew and bow 2013-06-19 TC 42 ISO/FDIS 15740 Photography * Photography — Electronic still picture imaging — Picture transfer protocol (PTP) for digital still photography devices 2013-06-23 (Revision of ISO 15740:2008) TC 43 ISO/FDIS 1680 Acoustics * Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines 2013-07-12 (Revision of ISO 1680:1999, ISO 1680:1999/DAmd 1) TC 45 ISO/FDIS 5999 Rubber and rubber products * Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification 2013-06-26 (Revision of ISO 5999:2007) TC 46 Information and documentation ISO/FDIS 3166-1 Codes for the representation of names of countries and their subdivisions — Part 1: Country codes 2013-06-20 (Revision of ISO 3166-1:2006, ISO 3166-1:2006/Cor 1:2007) Codes for the representation of names of countries and their subdivisions — Part 2: Country subdivision code ISO/FDIS 3166-2 2013-06-20 (Revision of ISO 3166-2:2007) Codes for the representation of names of countries and their subdivisions — Part 3: Code for formerly used names of countries ISO/FDIS 3166-3 2013-06-20 (Revision of ISO 3166-3:1999) TC 54 ISO/FDIS 4716 Essential oils * Essential oil of vetiver [Chrysopogon zizanioides (L.) Roberty, syn. Vetiveria zizanioides (L.) Nash] 2013-06-26 (Revision of ISO 4716:2002) TC 61 ISO/FDIS 4892-4 Plastics * Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps 2013-06-11 (Revision of ISO 4892-4:2004, ISO 4892-4:2004/Cor 1:2005) TC 67 ISO 19902:2007/F DAmd 1 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries * 2013-06-12 TC 70 ISO/FDIS 4548-5 Petroleum and natural gas industries — Fixed steel offshore structures — Amendment 1 Internal combustion engines * Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 5: Test for cold start simulation and hydraulic pulse durability 2013-06-06 (Revision of ISO 4548-5:1990) TC 85 ISO/FDIS 18589-7 Nuclear energy, nuclear technologies, and radiological protection * TC 104 ISO/FDIS 668 Measurement of radioactivity in the environment — Soil — Part 7: In situ measurement of gamma-emitting radionuclides 2013-06-26 Freight containers * Series 1 freight containers — Classification, dimensions and ratings 2013-06-16 (Revision of ISO 668:1995, ISO 668:1995/Amd 1:2005, ISO 668:1995/Amd 2:2005) TC 106 ISO/FDIS 16498 Dentistry * 2013-06-12 TC 120 ISO/FDIS 5431 Dentistry — Minimal dental implant data set for clinical use Leather * Leather — Wet blue goat skins — Specification 2013-06-18 (Revision of ISO 5431:1999) ISO/FDIS 5432 * Leather — Wet blue sheep skins — Specification 2013-06-18 (Revision of ISO 5432:1999) ISO/FDIS 5433 * Leather — Bovine wet blue — Specification 2013-06-18 (Revision of ISO 5433:1999) TC 122 Packaging ISO/FDIS 13274 * ISO/FDIS 16495 * 2013-06-26 Packaging — Transport packaging for dangerous goods — Test methods 2013-06-12 TC 153 ISO/FDIS 10631 Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and IBCs Valves * Metallic butterfly valves for general purposes 2013-06-09 (Revision of ISO 10631:1994) TC 163 ISO/FDIS 12571 Thermal performance and energy use in the built environment * Hygrothermal performance of building materials and products — Determination of hygroscopic sorption properties (Revision of ISO 12571:2000) TC 172 ISO 10110- Optics and photonics * Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric 2013-06-12 12:2007/FDAm d1 surfaces — Amendment 1 TC 173 Assistive products for persons with disability ISO/FDIS 7176-25 * Wheelchairs — Part 25: Batteries and chargers for powered wheelchairs — Requirements and test methods 2013-06-03 TC 190 Soil quality ISO/FDIS 11916-1 * ISO/FDIS 11916-2 * TC 199 ISO/FDIS 13856-3 2013-06-30 Soil quality — Determination of selected explosives and related compounds — Part 1: Method using highperformance liquid chromatography (HPLC) with ultraviolet detection 2013-06-30 Soil quality — Determination of selected explosives and related compounds — Part 2: Method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS) 2013-06-30 Safety of machinery * Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices 2013-06-05 (Revision of ISO 13856-3:2006) TC 207 ISO/FDIS 14031 Environmental management * Environmental management — Environmental performance evaluation — Guidelines 2013-06-19 (Revision of ISO 14031:1999) TC 213 ISO/FDIS 14253-1 Dimensional and geometrical product specifications and verification * Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for proving conformity or nonconformity with specifications 2013-06-12 (Revision of ISO 14253-1:1998, ISO 14253-1:1998/DAmd 1) ISO/FDIS 25178-603 * TC 216 ISO/FDIS 16187 2013-06-12 Footwear * Footwear and footwear components — Test method to assess antibacterial activity 2013-06-12 CASCO ISO/IEC FDIS 17067 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments Committee on conformity assessment * Conformity assessment — Fundamentals of product certification and guidelines for product certification schemes 2013-06-12 (Revision of ISO/IEC Guide 67:2004) JTC 1 Information technology ISO/IEC/IEEE FDIS 29119-1 * ISO/IEC/IEEE FDIS 29119-2 * ISO/IEC/IEEE * Software and systems engineering — Software testing — Part 1: Concepts and definitions 2013-06-23 Software and systems engineering — Software testing — Part 2: Test process 2013-06-23 Software and systems engineering — Software testing — Part 3: Test documentation FDIS 29119-3 2013-06-23 ISO/IEC 1449610:2012/FDAm d1 * ISO/IEC FDIS 23002-5 * Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 1: Additional profiles and supplemental enhancement information (SEI) messages 2013-06-13 Information technology — MPEG video technologies — Part 5: Reconfigurable media coding conformance and reference software 2013-06-13 Standards published New International Standards published between 01 April and 30 April 2013 * Available in English only ** French version of standard previously published in English only Price group TC 2 Fasteners ISO 8981:2013/Cor 1 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread — Technical Corrigendum 1 TC 4 Rolling bearings ISO 29821:2013 Rolling bearings — Accessories — Part 1: Dimensions for adapter sleeve assemblies and withdrawal sleeves ISO 29822:2013 Rolling bearings — Accessories — Part 2: Dimensions for locknuts and locking devices TC 6 Paper, board and pulps ISO/TS 17958:2013 D F * TC 22 Paper and board — Determination of fracture toughness — Constant rate of elongation method (1,7 mm/s) H TC 8 ISO 16165:2013 free Ships and marine technology * Ships and marine technology — Marine environment protection — Terminology relating to oil spill response Q Road vehicles ISO 151181:2013 * ISO 16850:2007/A md 1:2013 * ISO 17479:2013 * V Road vehicles — Pedestrian protection — Child head impact test method — Amendment 1 XZ Motorcycles — Measurement methods for gaseous exhaust emissions during inspection or maintenance E TC 23 ISO 27850:2013 Road vehicles — Vehicle to grid communication interface — Part 1: General information and use-case definition Tractors and machinery for agriculture and forestry * Tractors for agriculture and forestry — Falling object protective structures — Test procedures and performance requirements J ISO 42541:2013 Agricultural machinery — Safety — Part 1: General requirements ISO 162311:2013 Self-propelled agricultural machinery — Assessment of stability — Part 1: Principles TC 28 Petroleum products and lubricants ISO 4264:2007/Am d 1:2013 Petroleum products — Calculation of cetane index of middle-distillate fuels by the four-variable equation — Amendment 1 XZ ISO 44042:2010 Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 2: Non-aqueous fluids D ISO 13736:2013 Determination of flash point — Abel closed-cup method TC 29 Small tools ISO 6106:2013 Abrasive products — Checking the grain size of superabrasives R B L E ISO 9284:2013 Abrasive grains — Test-sieving machines B ISO 11529:2013 Milling cutters — Designation — Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges TC 34 Food products ISO 55301:2013 Wheat flour — Physical characteristics of doughs — Part 1: Determination of water absorption and rheological properties using a farinograph M ISO/TS 152161:2013 Microbiology of food and animal feed — Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR — Part 1: Method for quantification P ISO/TS 152162:2013 Microbiology of food and animal feed — Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR — Part 2: Method for qualitative detection N ISO 17180:2013 Animal feeding stuffs — Determination of lysine, methionine and threonine in commercial amino acid products and premixtures F G ISO 21569:2005/A md 1:2013 Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived products — Qualitative nucleic acid based methods — Amendment 1 X ISO 21570:2005/A md 1:2013 Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived products — Quantitative nucleic acid based methods — Amendment 1 XZ ISO 24276:2006/A md 1:2013 Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived products — General requirements and definitions — Amendment 1 XZ TC 38 Textiles ISO 139341:2013 Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method TC 41 Pulleys and belts (including veebelts) ISO 76221:2013 Steel cord conveyor belts — Longitudinal traction test — Part 1: Measurement of elongation ISO 8094:2013 Steel cord conveyor belts — Adhesion strength test of the cover to the core layer F B B TC 42 ISO 220282:2013 Photography * TC 43 ISO 5129:2001/Am d 1:2013 Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB) Acoustics * Acoustics — Measurement of sound pressure levels in the interior of aircraft during flight — Amendment 1 XZ TC 44 Welding and allied processes ISO 15615:2013 Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — Safety requirements in high-pressure devices ISO 945516:2013 Soft soldering fluxes — Test methods — Part 16: Flux efficacy test, wetting balance method TC 54 Essential oils ISO 25157:2013 H J * Essential oil of rose, Chinese Kushui type (Rosa sertata x Rosa rugosa) D TC 58 ISO 111193:2013 K Gas cylinders * Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners TC 61 Plastics ISO 75-1:2013 Plastics — Determination of temperature of deflection under load — Part 1: General test method R E ISO 75-2:2013 Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite D ISO 178:2010/Amd 1:2013 Plastics — Determination of flexural properties — Amendment 1 ISO 180:2000/Amd 2:2013 Plastics — Determination of Izod impact strength — Amendment 2: Precision data ISO 113572:2013 Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and glass transition step height C ISO 16929:2013 Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test E ISO 17178:2013 XZ XZ * Adhesives — Adhesives for bonding parquet to subfloor — Test methods and minimum requirements E TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO 15546:2011 Petroleum and natural gas industries — Aluminium alloy drill pipe ISO 20312:2011 Petroleum and natural gas industries — Design and operating limits of drill strings with aluminium alloy components U ISO 199017:2013 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units XC TC 69 Applications of statistical methods ISO 35343:2013 S * X TC 71 ISO 14484:2013 Statistics — Vocabulary and symbols — Part 3: Design of experiments Concrete, reinforced concrete and pre-stressed concrete * Performance guidelines for design of concrete structures using fibre-reinforced polymer (FRP) materials C TC 86 Refrigeration and air-conditioning ISO 163581:2013 * ISO 163582:2013 * ISO 163583:2013 * Air-cooled air conditioners and air-to-air heat pumps — Testing and calculating methods for seasonal performance factors — Part 1: Cooling seasonal performance factor M Air-cooled air conditioners and air-to-air heat pumps — Testing and calculating methods for seasonal performance factors — Part 2: Heating seasonal performance factor R Air-cooled air conditioners and air-to-air heat pumps — Testing and calculating methods for seasonal performance factors — Part 3: Annual performance factor C TC 92 Fire safety ISO 19701:2013 Methods for sampling and analysis of fire effluents TC 94 Personal safety -- Protective clothing and equipment ISO/TS 169767:2013 XA * Respiratory protective devices — Human factors — Part 7: Hearing and speech F TC 106 Dentistry ISO 36302:2013 Dentistry — Endodontic instruments — Part 2: Enlargers TC 110 Industrial trucks ISO 229154:2009/Amd 1:2013 Industrial trucks — Verification of stability — Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height — Amendment 1 TC 111 Round steel link chains, chain slings, components and accessories ISO 7597:2013 H * XZ Forged steel lifting hooks with latch, grade 8 E TC 112 ISO 2861:2013 Vacuum technology * Vacuum technology — Dimensions of clamped-type quick-release couplings C TC 121 ISO 810602:2013 Anaesthetic and respiratory equipment * Non-invasive sphygmomanometers — Part 2: Clinical investigation of automated measurement type S TC 126 Tobacco and tobacco products ISO 2971:2013 Cigarettes and filter rods — Determination of nominal diameter — Method using a non-contact optical measuring apparatus TC 127 ISO 7130:2013 J Earth-moving machinery * Earth-moving machinery — Operator training — Content and methods B Earth-moving machinery — Scrapers — Terminology and commercial specifications ISO 7133:2013 K TC 130 ISO 14298:2013 Graphic technology * Graphic technology — Management of security printing processes K TC 131 Fluid power systems ISO/TS 171652:2013 Hydraulic fluid power — Hose assemblies — Part 2: Practices for hydraulic hose assemblies ISO 6263:2013 Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces J K TC 142 Cleaning equipment for air and other gases ISO 294611:2013 Air intake filter systems for rotary machinery — Test methods — Part 1: Static filter elements TC 146 Air quality V ISO 122194:2013 Interior air of road vehicles — Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Small chamber method TC 147 Water quality ISO 131651:2013 Water quality — Radium-226 — Part 1: Test method using liquid scintillation counting ISO 16191:2013 G * Water quality — Determination of the toxic effect of sediment on the growth behaviour of Myriophyllum aquaticum ISO 238933:2013 Water quality — Biochemical and physiological measurements on fish — Part 3: Determination of vitellogenin TC 150 Implants for surgery ISO 58413:2013 * Implants for surgery — Cardiac pacemakers — Part 3: Low-profile connectors (IS-1) for implantable pacemakers Valves ISO 289211:2013 Industrial valves — Isolating valves for low-temperature applications — Part 1: Design, manufacturing and production testing TC 156 Corrosion of metals and alloys * TC 159 ISO/TR 72502:2010/Amd 1:2013 Corrosion of metals and alloys — Stress corrosion cracking — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking F L H Ergonomics * TC 163 Basic human body measurements for technological design — Part 2: Statistical summaries of body measurements from national populations — Amendment 1 XZ Thermal performance and energy use in the built environment ISO 18098:2013 * ISO 18099:2013 * TC 165 ISO/TR 201523:2013 L L TC 153 ISO 753911:2013 H Thermal insulating products for building equipment and industrial installations — Determination of the apparent density of preformed pipe insulation B Thermal insulating products for building equipment and industrial installations — Determination of the coefficient of thermal expansion D Timber structures * Timber structures — Bond performance of adhesives — Part 3: Use of alternative species for bond tests B TC 176 Quality management and quality assurance ISO 10004:2012 Quality management — Customer satisfaction — Guidelines for monitoring and measuring TC 184 Automation systems and integration ISO 9787:2013 Robots and robotic devices — Coordinate systems and motion nomenclatures P F ISO 20140- * Automation systems and integration — Evaluating energy efficiency and other factors of manufacturing sys- 1:2013 tems that influence the environment — Part 1: Overview and general principles TC 198 Sterilization of health care products ISO 134081:2008/Amd 1:2013 Aseptic processing of health care products — Part 1: General requirements — Amendment 1 ISO/TS 176653:2013 S XZ * Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product family and processing category for steam sterilization U TC 199 Safety of machinery ISO 138561:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors T ISO 138562:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars U TC 202 Microbeam analysis ISO 23833:2013 Microbeam analysis — Electron probe microanalysis (EPMA) — Vocabulary TC 204 Intelligent transport systems ISO 14906:2011/Co r 1:2013 Electronic fee collection — Application interface definition for dedicated short-range communication — Technical Corrigendum 1 N ISO/TR 240143:2013 * ISO 292811:2013 * ISO 292812:2013 * free Public transport — Interoperable fare management system — Part 3: Complementary concepts to Part 1 for multi-application media R Intelligent transport systems — Communication access for land mobiles (CALM) — Non-IP networking — Part 1: Fast networking & transport layer protocol (FNTP) P Intelligent transport systems — Communication access for land mobiles (CALM) — Non-IP networking — Part 2: Legacy system support M TC 206 Fine ceramics ISO 221974:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 4: Removal of formaldehyde E ISO 221975:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 5: Removal of methyl mercaptan E TC 207 Environmental management ISO/TR 14069:2013 * Greenhouse gases — Quantification and reporting of greenhouse gas emissions for organizations — Guidance for the application of ISO 14064-1 TC 211 Geographic information/Geomatics ISO 19152:2012 Geographic information — Land Administration Domain Model (LADM) TC 213 Dimensional and geometrical product specifications and verification X XA ISO/TS 17863:2013 Geometrical product specification (GPS) — Geometrical tolerancing of moveable assemblies TC 217 Cosmetics ISO 11930:2012 Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product ISO/TR 14735:2013 Cosmetics — Analytical methods — Nitrosamines: Technical guidance document for minimizing and determining N-nitrosamines in cosmetics TC 227 Springs ISO 16249:2013 J L * Project Committee: Product recall * Consumer product recall — Guidelines for suppliers R TC 243 ISO 10377:2013 Springs — Symbols L TC 240 ISO 10393:2013 E Project Committee: Consumer product safety * Consumer product safety — Guidelines for suppliers T IULTCS International Union of Leather Technologists and Chemists Societies ISO 17130:2013 Leather - Physical and mechanical tests - Determination of dimensional change CASCO Committee on conformity assessment ISO/IEC 17020:2012 Conformity assessment — Requirements for the operation of various types of bodies performing inspection JTC 1 Information technology B J ISO/IEC 10646:2012/A md 1:2013 * ISO/IEC TR 29181-3:2013 * ISO/IEC TR 29181-6:2013 * ISO/IEC TR 29181-7:2013 * ISO/IEC 78164:2013 * ISO 9660:1988/Am d 1:2013 * Information technology — Universal Coded Character Set (UCS) — Amendment 1: Linear A, Palmyrene, Manichaean, Khojki, Khudawadi, Bassa Vah, Duployan, and other characters Information technology — Future Network — Problem statement and requirements — Part 3: Switching and routing XB N Information technology — Future Network — Problem statement and requirements — Part 6: Media transport P Information technology — Future Network — Problem statement and requirements — Part 7: Service composition T Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange XB Information processing — Volume and file structure of CD-ROM for information interchange — Amendment 1 XZ ISO/IEC 27014:2013 * ISO/IEC 10918-5:2013 * ISO/IEC 10918-6:2013 * ISO/IEC 154441:2004/Amd 4:2013 * ISO/IEC 154441:2004/Amd 5:2013 * ISO/IEC 2300012:2010/Amd 3:2013 * ISO/IEC 23005-2:2013 * ISO/IEC 23005-3:2013 * ISO/IEC 23005-4:2013 * ISO/IEC 23006-1:2013 * Information technology — Security techniques — Governance of information security F Information technology — Digital compression and coding of continuous-tone still images: JPEG File Interchange Format (JFIF) — Part 5: E Information technology — Digital compression and coding of continuous-tone still images: Application to printing systems — Part 6: C Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Amendment 4: Guidelines for digital cinema applications XZ Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Amendment 5: Enhancements for digital cinema and archive profiles (additional frame rates) XZ Information technology — Multimedia application format (MPEG-A) — Part 12: Interactive music application format — Amendment 3: Conformance and reference software XZ Information technology — Media context and control — Part 2: Control information XC Information technology — Media context and control — Part 3: Sensory information XA Information technology — Media context and control — Part 4: Virtual world object characteristics XC Information technology — Multimedia service platform technologies — Part 1: Architecture K Standards confirmed The following International Standards are confimred for a five year period: TC 6 Paper, board and pulps ISO 302:2004 (reconfirmed) TC 22 Road vehicles ISO 2958:1973 (reconfirmed) ISO 3208:1974 (reconfirmed) ISO 3795:1989 (reconfirmed) ISO 5422:1982 (reconfirmed) ISO 10599-2:1997 (reconfirmed) ISO 15763:2002 (reconfirmed) TC 29 Small tools ISO 2421:2003 (reconfirmed) ISO 9136-1:2004 (reconfirmed) ISO 9285:1997 (reconfirmed) ISO 9286:1997 (reconfirmed) ISO 15637-1:2002 (reconfirmed) ISO 15637-2:2002 (reconfirmed) ISO 21537-1:2004 (reconfirmed) ISO 21537-2:2004 (reconfirmed) TC 34 Food products ISO 6655:1997 TC 38 Textiles ISO 105-C12:2004 (reconfirmed) ISO 105-J01:1997 (reconfirmed) ISO 105-J02:1997 (reconfirmed) ISO 105-P02:2002 (reconfirmed) ISO 105-Z03:1996 (reconfirmed) ISO 105-Z05:1996 (reconfirmed) ISO 105-Z10:1997 (reconfirmed) TC 39 Machine tools ISO 7006:1981 (reconfirmed) ISO 7007:1983 (reconfirmed) ISO 7008:1983 (reconfirmed) ISO 7009:1983 (reconfirmed) ISO 7568:1986 (reconfirmed) ISO 7569:1986 (reconfirmed) ISO 7570:1986 (reconfirmed) ISO 7571:1986 (reconfirmed) ISO 7945:1985 (reconfirmed) ISO 7946:1985 (reconfirmed) ISO 7947:1985 (reconfirmed) ISO 7948:1987 (reconfirmed) ISO 7949:1985 (reconfirmed) ISO 7950:1985 (reconfirmed) ISO 7957:1987 (reconfirmed) ISO 7958:1987 (reconfirmed) ISO 7959:1987 (reconfirmed) ISO 7983:1988 (reconfirmed) ISO 7984:1988 (reconfirmed) ISO 7987:1985 (reconfirmed) ISO 7988:1988 (reconfirmed) ISO 9264:1988 (reconfirmed) ISO 9265:1988 (reconfirmed) ISO 9266:1988 (reconfirmed) ISO 9267:1988 (reconfirmed) ISO 9375:1989 (reconfirmed) ISO 9414:1989 (reconfirmed) ISO 9415:1989 (reconfirmed) ISO 9451:1989 (reconfirmed) ISO 9452:1989 (reconfirmed) ISO 9535:1989 (reconfirmed) ISO 9536:1989 (reconfirmed) ISO 9537:1989 (reconfirmed) ISO 9558:1989 (reconfirmed) ISO 9566:1989 (reconfirmed) ISO 9567:1989 (reconfirmed) ISO 9615:1989 (reconfirmed) ISO 9616:1989 (reconfirmed) ISO 9617:1989 (reconfirmed) TC 48 Laboratory equipment ISO 7550:1985 (reconfirmed) ISO 7713:1985 (reconfirmed) ISO 8655-1:2002 (reconfirmed) ISO 8655-2:2002 (reconfirmed) ISO 8655-3:2002 (reconfirmed) ISO 8655-4:2002 (reconfirmed) ISO 8655-5:2002 (reconfirmed) ISO 4795:1996 (reconfirmed) TC 61 Plastics ISO 23560:2008 TC 72 Textile machinery and accessories ISO 8115-3:1995 (reconfirmed) TC 81 Common names for pesticides and other agrochemicals ISO 1750:1981 (reconfirmed) TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO 21243:2008 TC 91 Surface active agents ISO 304:1985 (reconfirmed) ISO 696:1975 (reconfirmed) ISO/TR 896:1977 (reconfirmed) ISO 4316:1977 (reconfirmed) ISO 4318:1989 (reconfirmed) ISO 4319:1977 (reconfirmed) ISO 4320:1977 (reconfirmed) ISO 4322:1977 (reconfirmed) ISO 4324:1977 (reconfirmed) ISO 4326:1980 (reconfirmed) ISO 4327:1979 (reconfirmed) ISO 6121:1988 (reconfirmed) ISO 6122:1978 (reconfirmed) ISO 6384:1981 (reconfirmed) ISO 6387:1983 (reconfirmed) ISO 6388:1989 (reconfirmed) ISO 6835:1981 (reconfirmed) ISO 6836:1983 (reconfirmed) ISO 6837:1982 (reconfirmed) ISO 6839:1982 (reconfirmed) ISO 6840:1982 (reconfirmed) ISO 6842:1989 (reconfirmed) ISO 6843:1988 (reconfirmed) ISO 6844:1983 (reconfirmed) ISO 6845:1989 (reconfirmed) ISO 6889:1986 (reconfirmed) ISO 7535:1984 (reconfirmed) ISO 8212:1986 (reconfirmed) ISO 8214:1985 (reconfirmed) ISO 8215:1985 (reconfirmed) ISO 9101:1987 (reconfirmed) TC 93 Starch (including derivatives and by-products) ISO 1743:1982 (reconfirmed) ISO 3188:1978 (reconfirmed) ISO 3946:1982 (reconfirmed) ISO 5378:1978 (reconfirmed) ISO 11212-1:1997 (reconfirmed) ISO 11212-2:1997 (reconfirmed) ISO 11212-3:1997 (reconfirmed) ISO 11212-4:1997 (reconfirmed) ISO 11215:1998 (reconfirmed) ISO 11216:1998 (reconfirmed) TC 104 Freight containers ISO 14829:2002 (reconfirmed) ISO 10374:1991 (reconfirmed) TC 107 Metallic and other inorganic coatings ISO 3613:2010 TC 118 Compressors and pneumatic tools, machines and equipment ISO 3857-1:1977 (reconfirmed) TC 121 Anaesthetic and respiratory equipment ISO 10651-4:2002 TC 122 Packaging ISO 6590-2:1986 (reconfirmed) TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO 10838-2:2000 (reconfirmed) TC 147 Water quality ISO 15587-1:2002 (reconfirmed) ISO 15587-2:2002 (reconfirmed) ISO/TS 16489:2006 (reconfirmed) ISO 6461-2:1986 (reconfirmed) ISO 18749:2004 (reconfirmed) TC 171 Document management applications ISO 3272-2:1994 (reconfirmed) ISO 3272-3:2001 (reconfirmed) ISO 6148:2001 (reconfirmed) ISO 8127-1:1989 (reconfirmed) ISO 9923:1994 (reconfirmed) ISO 12656:2001 (reconfirmed) ISO 32000-1:2008 ISO 6196-3:1997 (reconfirmed) ISO 6196-5:1987 (reconfirmed) ISO 6196-6:1992 (reconfirmed) ISO 6196-7:1992 (reconfirmed) ISO/TR 12036:2000 (reconfirmed) ISO/TR 12037:1998 (reconfirmed) ISO/TR 12654:1997 ISO/TR 18492:2005 TC 172 Optics and photonics ISO 9802:1996 (reconfirmed) ISO 10629:1996 (reconfirmed) TC 190 Soil quality ISO 10573:1995 (reconfirmed) ISO 11276:1995 (reconfirmed) ISO 11461:2001 (reconfirmed) TC 219 Floor coverings ISO 24334:2006 TC 227 Springs ISO 2162-2:1993 (reconfirmed) Standards withdrawn Period from 01 April to 30 April 2013 TC 29 Small tools ISO 11529-1:2005 (replaced by ISO 11529:2013) ISO 11529-2:2005 (replaced by ISO 11529:2013) TC 34 Food products ISO/TS 21098:2005 (replaced by ) TC 42 Photography ISO/TS 22028- (replaced by ISO 22028-2:2013) 2:2006 TC 112 Vacuum technology ISO 2861-1:1974 (replaced by ISO 2861:2013) TC 131 Fluid power systems ISO/TR 171652:2006 (replaced by ISO/TS 17165-2:2013) TC 204 Intelligent transport systems ISO 29281:2011 (replaced by ISO 29281-1:2013, ISO 29281-2:2013) Meeting calendar (update at 01 April 2013) Meetings called for the month of March are not in this edition. * Information definite but meeting not yet formally convened ** Provisional April-May 2013 29-2 Sydney (Australia) PC 272 Forensic sciences 29-3 Calgary (Canada) TC 251 Project committee: Asset management May 2013 2 Calgary (Canada) TC 23/SC 19 Tractors and machinery for agriculture and forestry/Agricultural electronics 4 Sydney (Australia) TC 110/SC 4 Industrial trucks/Rough-terrain trucks 6-8 Berlin (Germany) IIW International Institute of Welding 7 Milan (Italy) TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications 13 Berlin (Germany) TC 29/SC 9 Small tools/Tools with cutting edges made of hard cutting materials 13 Guangzhou (China) TC 68/SC 2 Financial services/Financial Services, security 13 Guangzhou (China) TC 68/SC 4 Financial services/Securities and related financial instruments 13-14 Brussels (Belgium) TC 122/SC 4 Packaging/Packaging and environment 13-17 Tokyo (Japan) TC 114 Horology 13-17 Vienna (Austria) TC 171 Document management applications 14 Berlin (Germany) TC 29/SC 2 Small tools/High speed steel cutting tools and their attachments 14 Guangzhou (China) TC 68/SC 7 Financial services/Core banking 14 Burr Ridge (USA) TC 195/SC 1 Building construction machinery and equipment/Machinery and equipment for concrete work 15 Santa María de Lamas (Portugal) TC 87 Cork 15 Tokyo (Japan) TC 114/SC 6 Horology/Precious metal coverings 15 Tokyo (Japan) TC 114/SC 14 Horology/Table and wall clocks 15-16 Tokyo (Japan) TC 22/SC 1 Road vehicles/Ignition equipment 16 Hangzhou (China) TC 10/SC 1 Technical product documentation/Basic conventions 16 Hangzhou (China) TC 10/SC 6 Technical product documentation/Mechanical engineering documentation 16 Berlin (Germany) TC 29/SC 8 Small tools/Tools for pressing and moulding 16 Guangzhou (China) TC 68 Financial services 16-17 Frankfurt (Germany) TC 184/SC 5 Automation systems and integration/Interoperability, integration, and architectures for enterprise systems and automation applications 17 Hangzhou (China) TC 10 Technical product documentation 17 Berlin (Germany) TC 22/SC 10 Road vehicles/Impact test procedures 17 Berlin (Germany) TC 22/SC 12 Road vehicles/Passive safety crash protection systems 17 Berlin (Germany) TC 29 Small tools 17 Burr Ridge (USA) TC 195 Building construction machinery and equipment 19-24 Shenzen (China) TC 130 Graphic technology 20-23 Durban (South Africa) TC 249 Traditional chinese medicine 21-24 Berlin (Germany) TC 43/SC 3 Acoustics/Underwater acoustics 22 Vancouver (Canada) TC 67/SC 5 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe 22 Stockholm (Sweden) TC 145/SC 1 Graphical symbols/Public information symbols 22-23 La Valetta (Malta) COPOLCO Committee on consumer policy 23 Stockholm (Sweden) TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, symbols and colours 23 Stockholm (Sweden) TC 145/SC 3 Graphical symbols/Graphical symbols for use on equipment 23-25 Moscow (Russian Federation) TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology * 24 Salzburg (Austria) TC 89 Wood-based panels 24 Stockholm (Sweden) TC 145 Graphical symbols 24 Delft (Netherlands) TC 158 Analysis of gases 25-31 Montreal (Canada) JTC 1/SC 7 Information technology/Software and systems engineering 27-31 Moscow (Russian Federation) TC 20/SC 14 Aircraft and space vehicles/Space systems and operations 27-31 Paris (France) TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings 27-31 Delft (Netherlands) TC 223 Societal security 28-31 Helsinki (Finland) TC 257 General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions 29 Bilbao (Spain) TC 147/SC 3 Water quality/Radioactivity measurements 30-31 Busan (Korea, Republic of) TC 211 Geographic information/Geomatics 31 Shanghai (China) TC 4 Rolling bearings 31 Berlin (Germany) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining 31 Porto (Portugal) TC 228 Tourism and related services June 2013 3-5 Berlin (Germany) TC 44/SC 3 Welding and allied processes/Welding consumables 3-5 Paris (France) TC 46/SC 9 Information and documentation/Identification and description 3-7 Auburn Hills (USA) TC 22/SC 21 Road vehicles/Electrically propelled road vehicles 3-7 Rotterdam (Netherlands) TC 34/SC 5 Food products/Milk and milk products 3-7 McLean, Virginia (USA) TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools 3-7 Copenhagen (Denmark) TC 42 Photography 3-7 Paris (France) TC 46/SC 11 Information and documentation/Archives/records management 3-7 Milwaukee (USA) TC 69 Applications of statistical methods 3-7 San Francisco (USA) TC 173/SC 1 Assistive products for persons with disability/Wheelchairs 3-8 Warsaw (Poland) TC 96 Cranes 3-8 Paris (France) TC 184/SC 4 Automation systems and integration/Industrial data 4-5 Amsterdam (Netherlands) TC 259 Project committee: Outsourcing 4-6 Copenhagen (Denmark) TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection * 5 Berlin (Germany) TC 29/SC 5 Small tools/Grinding wheels and abrasives 5 Prague (Czech Republic) TC 115 Pumps 5-7 Paris (France) TC 46/SC 4 Information and documentation/Technical interoperability 6 Lysaker (Norway) TC 8/SC 2 Ships and marine technology/Marine environment protection 6 Milan (Italy) TC 22/SC 13 Road vehicles/Ergonomics applicable to road vehicles 6-7 Milan (Italy) TC 22/SC 17 Road vehicles/Visibility 6-7 Paris (France) TC 23/SC 6 Tractors and machinery for agriculture and forestry/Equipment for crop protection 10-14 Tel Aviv (Israel) * TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators 11 Geneva (Switzerland) * CSC/SPC Council/Strategy and Policy Committee (CSC/SPC) 11 Chantilly (USA) * TC 220 Cryogenic vessels 11-12 Brugge (Belgium) TC 17/SC 17 Steel/Steel wire rod and wire products 11-12 Burr Ridge (USA) TC 23/SC 3 Tractors and machinery for agriculture and forestry/Safety and comfort 11-13 London (United Kingdom) * TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements 11-13 Gothenburg (Sweden) * TC 22 Road vehicles 11-14 Sydney (Australia) REMCO Committee on reference materials 12 Munich (Germany) TC 118/SC 4 Compressors and pneumatic tools, machines and equipment/Compressed air purity specification and compressed air treatment equipment 12-13 Burr Ridge (USA) TC 23/SC 4 Tractors and machinery for agriculture and forestry/Tractors 12-13 Geneva (Switzerland) TMB Technical Management Board 13 Atlanta (USA) TC 85/SC 5 Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle 13 Berlin (Germany) TC 156 Corrosion of metals and alloys 13-14 Burr Ridge (USA) TC 23 Tractors and machinery for agriculture and forestry 13-14 Barcelona (Spain) TC 91 Surface active agents 14 Groenkloof (South Africa) TC 37 Terminology and other language and content resources 14 Pretoria (South Africa) TC 37/SC 1 Terminology and other language and content resources/Principles and methods 14 Pretoria (South Africa) TC 37/SC 2 Terminology and other language and content resources/Terminographical and lexicographical working methods 14 Pretoria (South Africa) * TC 37/SC 3 Terminology and other language and content resources/Systems to manage terminology, knowledge and content 14 Pretoria (South Africa) * TC 37/SC 4 Terminology and other language and content resources/Language resource management ** * * * 14 Pretoria (South Africa) 14 * TC 37/SC 5 Terminology and other language and content resources/Translation, interpreting and related technology Paris (France) TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps 14-15 Atlanta (USA) TC 85/SC 6 Nuclear energy, nuclear technologies, and radiological protection/Reactor technology 17-19 Delft (Netherlands) TC 252 Project committee: Natural gas fuelling stations for vehicles 17-21 Seoul (Korea, Republic of) JTC 1/SC 6 Information technology/Telecommunications and information exchange between systems 17-21 Bellevue (USA) JTC 1/SC 34 Information technology/Document description and processing languages 17-21 Shanghai (China) TC 121 Anaesthetic and respiratory equipment 17-21 Berlin (Germany) TC 149 Cycles 18-19 Düsseldorf (Germany) TC 17/SC 4 Steel/Heat treatable and alloy steels 18-19 Louvain-laNeuve (Belgium) TC 17/SC 11 Steel/Steel castings 18-19 Courbevoie, Paris (France) TC 29/SC 10 Small tools/Assembly tools for screws and nuts, pliers and nippers 18-19 (Spain) TC 137 Footwear sizing designations and marking systems 19 Porto de Galinhas (Brazil) TC 135/SC 9 Non-destructive testing/Acoustic emission testing 19-20 Prague (Czech Republic) TC 17/SC 12 Steel/Continuous mill flat rolled products 19-20 London (United Kingdom) TC 22/SC 3 Road vehicles/Electrical and electronic equipment 21 AnnweilerBindersbach (Germany) TC 43/SC 2 Acoustics/Building acoustics 24-26 Berlin (Germany) TC 34/SC 9 Food products/Microbiology 24-26 Calgary (Canada) TC 253 Project committee: Treated wastewater re-use for irrigation 24-27 Istanbul (Turkey) TC 189 Ceramic tile 24-28 Montreal (Canada) TC 35 Paints and varnishes 24-28 Moscow (Russian Federation) TC 193 Natural gas 24-28 Gaborone (Botswana) TC 207 Environmental management 25-26 Tokyo (Japan) TC 17/SC 9 Steel/Tinplate and blackplate 26 Montreal (Canada) TC 35/SC 14 Paints and varnishes/Protective paint systems for steel structures 26-27 Paris (France) TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding 27 Montreal (Canada) TC 35/SC 9 Paints and varnishes/General test methods for paints and varnishes 27-28 Tokyo (Japan) TC 67/SC 6 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Processing equipment and systems ** ** ** * * 28 Stockholm (Sweden) TC 51 Pallets for unit load method of materials handling 28 Espoo (Helsinki) (Finland) TC 188 Small craft TC 67/SC 3 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements Washington, D.C (USA) ** July 2013 1-5 Bornholm (Denmark) TC 268 Sustainable development in communities 2 Berlin (Germany) TC 274 Light and lighting 2-4 Bornholm (Denmark) TC 268/SC 1 Sustainable development in communities/Smart community infrastructures 12 Nottingham (United Kingdom) TC 261 Additive manufacturing 15-17 Vienna (Austria) PC 273 Customer contact centres 15-19 Paris (France) JTC 2 Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology ** * August 2013 18 Pretoria (South Africa) TC 27/SC 1 Solid mineral fuels/Coal preparation: Terminology and performance 18-23 Centurion (South Africa) TC 27 Solid mineral fuels 19 Pretoria (South Africa) TC 27/SC 5 Solid mineral fuels/Methods of analysis 21-23 (USA) ** TC 134 Fertilizers and soil conditioners 26-30 (Canada) ** JTC 1/SC 35 Information technology/User interfaces TC 172/SC 5 Optics and photonics/Microscopes and endoscopes September 2013 3-6 Hangzhou (China) 8-9 Victoria (Canada) * TC 33 Refractories 8-13 Moscow (Russian Federation) * JTC 1/SC 36 Information technology/Information technology for learning, education and training 8-13 Suzhou (China) TC 61 Plastics 9-10 London (United Kingdom) TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas 9-10 Paris (France) TC 26 Copper and copper alloys 9-11 Gaithersburg (USA) ** TC 172/SC 9 Optics and photonics/Electro-optical systems 9-13 Delft (Netherlands) * JTC 1/SC 34 Information technology/Document description and processing languages 9-13 Montreal (Canada) TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration and shock 9-13 Tallberg (Sweden) TC 258 Project, programme and portfolio management 9-14 Stockholm TC 163 Thermal performance and energy use in the built environment * * (Sweden) 10 London (United Kingdom) TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder 10 Paris (France) TC 79/SC 11 Light metals and their alloys/Titanium 11 London (United Kingdom) TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems 11 London (United Kingdom) TC 21/SC 11 Equipment for fire protection and fire fighting/Smoke and heat control systems and components 11 Suzhou (China) TC 61/SC 1 Plastics/Terminology 11 Suzhou (China) * TC 61/SC 2 Plastics/Mechanical properties 11 Suzhou (China) * TC 61/SC 5 Plastics/Physical-chemical properties 11 Suzhou (China) * TC 61/SC 10 Plastics/Cellular plastics 11 Suzhou (China) * TC 61/SC 11 Plastics/Products 11 Suzhou (China) * TC 61/SC 12 Plastics/Thermosetting materials 11 Paris (France) TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium 11-12 Stockholm (Sweden) * TC 119/SC 3 Powder metallurgy/Sampling and testing methods for sintered metal materials (excluding hardmetals) 12 London (United Kingdom) * TC 21/SC 2 Equipment for fire protection and fire fighting/Manually transportable fire extinguishers 12 Suzhou (China) TC 61/SC 4 Plastics/Burning behaviour 12 Suzhou (China) * TC 61/SC 6 Plastics/Ageing, chemical and environmental resistance 12 Suzhou (China) * TC 61/SC 9 Plastics/Thermoplastic materials 12 Suzhou (China) * TC 61/SC 13 Plastics/Composites and reinforcement fibres 12 Paris (France) ** TC 79/SC 2 Light metals and their alloys/Organic and anodic oxidation coatings on aluminium 12 Paris (France) ** TC 79/SC 6 Light metals and their alloys/Wrought aluminium and aluminium alloys 12 Stockholm (Sweden) * TC 119/SC 2 Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals) 12 Stockholm (Sweden) * TC 119/SC 4 Powder metallurgy/Sampling and testing methods for hardmetals 12 Vienna (Austria) * TC 146/SC 3 Air quality/Ambient atmospheres 13 London (United Kingdom) * TC 21 Equipment for fire protection and fire fighting 13 Paris (France) ** TC 79 Light metals and their alloys 13 Stockholm (Sweden) TC 119 Powder metallurgy 13 Stockholm (Sweden) * TC 119/SC 5 Powder metallurgy/Specifications for powder metallurgical materials (excluding hardmetals) 13 Vienna (Austria) * TC 146/SC 5 Air quality/Meteorology 13 Vienna (Austria) TC 146/SC 6 Air quality/Indoor air 13 Frankfurt (Germany) TC 244 Industrial furnaces and associated processing equipment 15-20 Velsen (Netherlands) TC 164 Mechanical testing of metals * * ** 16 Sydney (Australia) * PC 271 Compliance programs 16-17 St. Petersburg (Russian Federation) * DEVCO Committee on developing countries matters 16-17 St. Petersburg (Russian Federation) * TMB Technical Management Board 16-20 Copenhagen (Denmark) * TC 67/SC 7 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Offshore structures 16-20 London (United Kingdom) * TC 150 Implants for surgery 16-20 Fukuoka (Japan) * TC 190 Soil quality 16-20 Fukuoka (Japan) * TC 190/SC 1 Soil quality/Evaluation of criteria, terminology and codification 16-20 Fukuoka (Japan) * TC 190/SC 2 Soil quality/Sampling 16-20 Fukuoka (Japan) * TC 190/SC 3 Soil quality/Chemical methods and soil characteristics 16-20 Fukuoka (Japan) * TC 190/SC 4 Soil quality/Biological methods 16-20 Fukuoka (Japan) * TC 190/SC 7 Soil quality/Soil and site assessment 17 Paris (France) * TC 254 Safety of amusement rides and amusement devices 17-18 Belo Horizonte (Brazil) ** TC 155 Nickel and nickel alloys 17-19 Tokyo (Japan) * JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces 17-19 Chengdu (China) * TC 256 Pigments, dyestuffs and extenders 18-20 St. Petersburg (Russian Federation) * GA General Assembly 19 Atlanta (USA) * TC 142 Cleaning equipment for air and other gases 19-20 Graz (Austria) * TC 172/SC 6 Optics and photonics/Geodetic and surveying instruments 21 St. Petersburg (Russian Federation) * COUNCIL Council 23-26 (Canada) ** TC 153/SC 1 Valves/Design, manufacture, marking and testing 23-27 Kobe (Japan) * JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS) 23-27 Milan (Italy) ** TC 120 Leather 23-27 Vienna (Austria) * TC 218 Timber 25-26 Oslo (Norway) * TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries 26-27 Toulouse (France) * TC 264 Fireworks 27 Seoul (Korea, Republic of) ** TC 44/SC 12 Welding and allied processes/Soldering materials 27 (Canada) ** TC 153/SC 1 Valves/Design, manufacture, marking and testing 27 Helsinki (Finland) * TC 213 Dimensional and geometrical product specifications and verification St. Petersburg ** CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN) (Russian Federation) London (United Kingdom) ** TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water 13 Paris (France) ** TC 79/SC 4 Light metals and their alloys/Unalloyed (refined) aluminium ingots 13 Paris (France) ** TC 79/SC 7 Light metals and their alloys/Aluminium and cast aluminium alloys 13 Paris (France) ** TC 79/SC 9 Light metals and their alloys/Symbolization (Germany) ** TC 180 Solar energy Tokyo (Japan) ** TC 267 Facilities management September-October 2013 30-4 (Sweden) ** JTC 1/SC 25 Information technology/Interconnection of information technology equipment 30-1 Tampere (Finland) ** TC 23/SC 17 Tractors and machinery for agriculture and forestry/Manually portable forest machinery October 2013 2-3 Tampere (Finland) TC 23/SC 15 Tractors and machinery for agriculture and forestry/Machinery for forestry 2-3 St. John, Newfoundland (Canada) TC 67/SC 8 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Arctic operations 3-4 Chantilly (USA) TC 58/SC 2 Gas cylinders/Cylinder fittings 5 Incheon (Korea, Republic of) TC 106 Dentistry 7 Istanbul (Turkey) TC 38/SC 1 Textiles/Tests for coloured textiles and colorants 7-8 Milan (Italy) ** TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes 7-9 Tokyo (Japan) * TC 70 Internal combustion engines 7-9 Tokyo (Japan) * TC 70/SC 8 Internal combustion engines/Exhaust gas emission measurement 7-9 Istanbul (Turkey) ** TC 126 Tobacco and tobacco products 7-11 Beijing (China) * CASCO Committee on conformity assessment 7-11 Oslo (Norway) * TC 138 Plastics pipes, fittings and valves for the transport of fluids 8 Istanbul (Turkey) TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests 9 London (United Kingdom) TC 8/SC 7 Ships and marine technology/Inland navigation vessels 9 Istanbul (Turkey) TC 38/SC 23 Textiles/Fibres and yarns 9-10 Seogwipo-si (Korea, Republic of) TC 159 Ergonomics 10 Istanbul (Turkey) TC 38/SC 24 Textiles/Conditioning atmospheres and physical tests for textile fabrics 11 Istanbul (Turkey) TC 38 Textiles 11 Garching (Germany) ** TC 60 Gears 11 Garching (Germany) ** TC 60/SC 1 Gears/Nomenclature and wormgearing 11 Garching (Ger- ** TC 60/SC 2 Gears/Gear capacity calculation * * ** many) 11 Venice (Italy) * TC 146/SC 2 Air quality/Workplace atmospheres 14-15 Miami (USA) ** TC 44/SC 3 Welding and allied processes/Welding consumables 14-17 Stuttgart (Germany) TC 165 Timber structures 14-18 Paris (France) * PC 271 Compliance programs 14-18 Paris (France) * TC 2 Fasteners 14-18 Seoul (Korea, Republic of) * TC 108 Mechanical vibration, shock and condition monitoring 15 La Plaine StDenis (France) ** TC 44/SC 5 Welding and allied processes/Testing and inspection of welds 16 La Plaine StDenis (France) ** TC 44/SC 9 Welding and allied processes/Health and safety 16-18 Munich (Germany) * TC 58/SC 3 Gas cylinders/Cylinder design 16-18 (Korea, Republic of) ** TC 123 Plain bearings 16-18 (Korea, Republic of) ** TC 123/SC 2 Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions 16-18 (Korea, Republic of) ** TC 123/SC 3 Plain bearings/Dimensions, tolerances and construction details 16-18 (Korea, Republic of) ** TC 123/SC 5 Plain bearings/Quality analysis and assurance 16-18 (Korea, Republic of) ** TC 123/SC 6 Plain bearings/Terms and common items 16-18 (Korea, Republic of) ** TC 123/SC 7 Plain bearings/Special types of plain bearings 17-18 La Plaine StDenis (France) ** TC 44 Welding and allied processes 18 Berlin (Germany) * TC 22/SC 7 Road vehicles/Injection equipment and filters for use on road vehicles 21-25 (Europe) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools 21-25 Sao Paulo (Brazil) * TC 181 Safety of toys 21-25 Sydney (Australia) * TC 215 Health informatics 21-26 Berlin (Germany) * TC 147 Water quality 22-25 Tokyo (Japan) * TC 146/SC 1 Air quality/Stationary source emissions 23 Paris (France) * TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete 23 Tokyo (Japan) ** TC 206 Fine ceramics 24-25 Sarajevo (Bosnia and Herzegovina) ** TC 34/SC 12 Food products/Sensory analysis 24-25 Berlin (Germany) TC 173 Assistive products for persons with disability 28-31 Bali (Indonesia) TC 45/SC 1 Rubber and rubber products/Hoses (rubber and plastics) 31 Bali (Indonesia) TC 45/SC 2 Rubber and rubber products/Testing and analysis * 31 Bali (Indonesia) TC 45/SC 4 Rubber and rubber products/Products (other than hoses) Berlin (Germany) ** TC 34/SC 15 Food products/Coffee (France) ** TC 111 Round steel link chains, chain slings, components and accessories (France) ** TC 111/SC 1 Round steel link chains, chain slings, components and accessories/Chains and chain slings Berlin (Germany) ** TC 172/SC 7 Optics and photonics/Ophthalmic optics and instruments Beijing (China) ** TC 184/SC 2 Automation systems and integration/Robots and robotic devices Boulder (USA) ** TC 202 Microbeam analysis Carson City (USA) ** TC 209 Cleanrooms and associated controlled environments TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage) TC 45 Rubber and rubber products October-December 2013 7-11 Oslo (Norway) * October-November 2013 28-1 Bali (Indonesia) November 2013 1 Bali (Indonesia) * TC 45/SC 3 Rubber and rubber products/Raw materials (including latex) for use in the rubber industry 4-8 Sydney (Australia) * TC 34/SC 17 Food products/Management systems for food safety 4-8 Shenzen (China) * TC 160 Glass in building 4-9 Perros-Guirec (France) ** JTC 1 Information technology 6-9 Washington, D.C (USA) * TC 227 Springs 7-9 Okinawa (Japan) ** TC 201 Surface chemical analysis 8 Paris (France) * TC 92/SC 1 Fire safety/Fire initiation and growth 10-15 Mexico (Mexico) * TC 113 Hydrometry 11-15 Mexico (Mexico) TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices 11-15 Tokyo (Japan) * TC 98 Bases for design of structures 13 Tokyo (Japan) ** TC 110/SC 1 Industrial trucks/General terminology 14 Tokyo (Japan) ** TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks 14-15 Redlands (USA) * TC 211 Geographic information/Geomatics 15 Tokyo (Japan) ** TC 110 Industrial trucks 18-20 Berlin (Germany) * TC 20 Aircraft and space vehicles 19-21 Singapore (Singapore) * TC 212 Clinical laboratory testing and in vitro diagnostic test systems 20-22 Tokyo (Japan) * TC 269 Railway applications 30 Berlin (Germany) ** TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining Berlin (Germany) ** TC 41 Pulleys and belts (including veebelts) 4th Quarter 2013 New Delhi (India) ** TC 23/SC 18 Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems (Europe) ** TC 24/SC 4 Particle characterization including sieving/Particle characterization London (United Kingdom) ** TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages Paris (France) ** TC 275 Sludge recovery, recycling, treatment and disposal Bratislava (Slovakia) ** TC 44/SC 11 Welding and allied processes/Qualification requirements for welding and allied processes personnel (Unknown) ** TC 173/SC 2 Assistive products for persons with disability/Classification and terminology (Sweden) ** TC 205 Building environment design ** TC 17/SC 3 Steel/Steels for structural purposes Paris (France) ** TC 58/SC 4 Gas cylinders/Operational requirements for gas cylinders (South America) ** JTC 1/SC 35 Information technology/User interfaces (Sweden) ** TC 213 Dimensional and geometrical product specifications and verification Month unknown 2013 January 2014 Paris (France) February 2014 10-14 March 2014 13 London (United Kingdom) * TC 118/SC 1 Compressors and pneumatic tools, machines and equipment/Process compressors 13 London (United Kingdom) * TC 118/SC 3 Compressors and pneumatic tools, machines and equipment/Pneumatic tools and machines 13 London (United Kingdom) * TC 118/SC 4 Compressors and pneumatic tools, machines and equipment/Compressed air purity specification and compressed air treatment equipment 13 London (United Kingdom) * TC 118/SC 6 Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air systems 14 London (United Kingdom) TC 118 Compressors and pneumatic tools, machines and equipment 23-27 Warsaw (Poland) * TC 107 Metallic and other inorganic coatings 23-27 Warsaw (Poland) * TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes 23-27 Warsaw (Poland) * TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.) 23-27 Warsaw (Poland) * TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests 23-27 Warsaw (Poland) * TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings 27-28 Geneva (Switzerland) * COUNCIL Council ** PC 271 Compliance programs March-April 2014 31-4 Vienna (Austria) April 2014 7-11 Delft (Netherlands) * TC 6 Paper, board and pulps 7-11 Delft (Netherlands) * TC 6/SC 2 Paper, board and pulps/Test methods and quality specifications for paper and board 7-11 Bologna (Italy) * TC 110/SC 4 Industrial trucks/Rough-terrain trucks 7-11 Amsterdam (Netherlands) * TC 161 Control and protective devices for gas and/or oil burners and appliances 8-9 (Japan) ** TC 199 Safety of machinery 8-10 (Brazil) ** TC 67/SC 2 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems 14-15 Hong Kong (Hong Kong, China) * JTC 1/SC 27 Information technology/IT Security techniques Berlin (Germany) ** TC 34/SC 2 Food products/Oleaginous seeds and fruits and oilseed meals Berlin (Germany) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils (Brazil) ** TC 102 Iron ore and direct reduced iron May 2014 9-16 London (United Kingdom) ** TC 10 Technical product documentation 12-16 London (United Kingdom) ** TC 68/SC 4 Financial services/Securities and related financial instruments 15 London (United Kingdom) * TC 68 Financial services 19-23 Berlin (Germany) ** TC 43 Acoustics 19-23 Berlin (Germany) ** TC 43/SC 1 Acoustics/Noise 19-24 Karuizawa (Japan) ** TC 215 Health informatics Beijing (China) ** TC 24/SC 4 Particle characterization including sieving/Particle characterization Washington, D.C (USA) ** TC 46/SC 11 Information and documentation/Archives/records management June 2014 1-6 (Sweden) ** TC 127 Earth-moving machinery 5-6 Berlin (Germany) * TC 211 Geographic information/Geomatics September 2014 8-9 Madrid (Spain) * JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces 10-12 Rio de Janeiro (Brazil) * GA General Assembly 13 Rio de Janeiro (Brazil) * COUNCIL Council (USA) ** TC 34/SC 16 Food products/Horizontal methods for molecular biomarker analysis Milan (Italy) ** TC 39/SC 4 Machine tools/Woodworking machines (South Africa) ** TC 178 Lifts, escalators and moving walks Montreal (Canada) ** TC 213 Dimensional and geometrical product specifications and verification ** TC 48 Laboratory equipment 3rd Quarter 2014 London (United Kingdom) October 2014 5-10 Berlin (Germany) ** TC 215 Health informatics Prague (Czech Republic) ** TC 135 Non-destructive testing ** TC 45 Rubber and rubber products ** TC 146 Air quality ** TC 34/SC 7 Food products/Spices, culinary herbs and condiments (USA) ** REMCO Committee on reference materials (Australia) ** TC 17/SC 1 Steel/Methods of determination of chemical composition (Brazil) ** TC 28 Petroleum products and lubricants Beijing (China) ** TC 36 Cinematography (Germany) ** TC 37 Terminology and other language and content resources (Japan) ** TC 44 Welding and allied processes (United Kingdom) ** TC 142 Cleaning equipment for air and other gases Suzhou (China) ** TC 164 Mechanical testing of metals (Germany) ** TC 190 Soil quality ** TC 213 Dimensional and geometrical product specifications and verification Foshan (China) ** TC 107 Metallic and other inorganic coatings Foshan (China) ** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.) Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests Foshan (China) ** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings Tienjin (China) ** TC 161 Control and protective devices for gas and/or oil burners and appliances (Europe) ** TC 215 Health informatics ** TC 172/SC 7 Optics and photonics/Ophthalmic optics and instruments November 2014 3-7 Cape Town (South Africa) 4th Quarter 2014 (South Africa) 2nd Semester 2014 Madrid (Spain) Month unknown 2014 February 2015 London (United Kingdom) 1st Quarter 2015 April 2015 2nd Quarter 2015 (China) 3rd Quarter 2015 Sao Paulo (Brazil) ** TC 215 Health informatics ** JTC 1 Information technology (South Africa) ** REMCO Committee on reference materials (Finland) ** TC 44 Welding and allied processes (France) ** TC 45 Rubber and rubber products (Japan) ** TC 142 Cleaning equipment for air and other gases (China) ** TC 155 Nickel and nickel alloys (United Kingdom) ** TC 164 Mechanical testing of metals (Austria) ** TC 190 Soil quality ** TC 161 Control and protective devices for gas and/or oil burners and appliances ** JTC 1 Information technology (Russian Federation) ** REMCO Committee on reference materials (Australia) ** TC 44 Welding and allied processes November 2015 (China) Month unknown 2015 April 2016 Seoul (Korea, Republic of) November 2016 (Norway) Month unknown 2016