CURRICULUM VITAE
PERSONAL DATA
“Muhamad Syaiful Anwar”
Jakarta-February, 20th1988 – Single, Moslem
39th Masjid Street’s 13/07, Susukan - Ciracas
East Jakarta 13750 - Indonesia
0856 3223 624 / 021 8408433
Passport Number: A 2940000
Email:
syaiful.anwar@engineer.com
muh.syaiful_anwar@yahoo.com
EDUCATION
Sepuluh Nopember Institute of Technology (ITS) Surabaya
Faculty of Marine Technology
Department of Naval Architecture and Shipbuilding Engineering
Graduated in 2013 –GPA: 3.14 Scale 4

Asshiddiqiyah -Jakarta,
Senior High School in Natural Science - graduated in 2006
KEY PROFESSIONAL SUMMARY



DESIGN AND STRUCTURE ENGINEERING
Having an excellent analytical skill in structural engineering
Having the ability to work as an offshore structural engineer in Oil &Gas
facilities design project by using SACS 5.2 & SACS 5.3 such as
 Create modeling and running analysis.
 Understanding the concept and capable for performing structural
analysis
for lifting - defining sling load and shackle property,
transportation – defining the deflection of the structure, stability of
barge for transportation of deck platform, load out analyst, psi input
and pile interaction to foundation.
 Prepare design report, calculation and design drawing as required
Understanding the rule that would otherwise require structural design by
AISC, API RP2A, DNV, GL /Noble Denton.

CONSTRUCTION ENGINEERING
Capable to perform construction engineer duties for oil and gas engineering
project in painting and coating sector such as
 Capable to Monitor Inspection Testing Plan (ITP) & Quality Plan
 Performing for Loading and unloading on painting internal and external
damage of structure and piping.
 Inspection for surface preparation, blasting, measuring Dry Film Thickness
(DFT) and Wet Film Thickness (WFT)
 Perform the Destructive test (DT) and Non-Destructive Test (NDT) for
coating such as Holiday test, Adhesion test, etc.
 Understanding the rule for the coating that would otherwise require by
Client and Vendor such as NACE, SSPC and ASTM
NAVAL ARCHITECTURE AND MARINE ENGINEERING
 Have good knowledge in floating structure, Hull Design and Construction.
 Make analyst for fluid/wave generated motion, frame structural and
strength of floating structure, piping stress, and steel structure.
 Capable for Performing and understanding analyst by using SACS 5.6
Marine Enterprise for intact stability, motion, mooring, tank calibration,
Hydrostatic calculation, strength, damage of the floating structure such
as offshore barge transportation, FPSO/FLNG included its top side and
modules, Semisubmersible, etc.
 Understanding the rule that would otherwise require design by, DNV, GL
/Noble Denton, BKI and IMO for the floating structure design.
Having the ability to work as a good team player. I have had many experiences
working as a team, such as in college student organization and committee. I
understand what it means to be a part of something larger than yourself and how
to work with a group to accomplish a shared goal
Having willingness to learn and determined, focus to a goal achievement
PROFESSIONAL TRAINING
ENGINEERING





Offshore Structure Design Basis - Certified
SACS 5.3 held by Ap-Greid Oil & Gas Design Training -Jakarta 2013
Coating Inspector Level I – Certified (Expiration date : 2017)
Badan Nasional Sertifikasi Profesi (BNSP) Coating – held by Corrosion Care
Indonesia (CCI) and Ascoatindo– Bandung 2012
Pipe Stress Analyst
Caesar II 5.1 held by Ap-Greid Oil & Gas Design Training-Jakarta 2012
Training For Computational Fluid Dynamic - Certified
Finite Element Analyst by Marine Engineering ITS Surabaya 2012
Short Course Autocad Design Modeling 2D and 3D - Certified
Held by 3DSolusindo - Authorized by Autodesk, Surabaya, 2011



LEADERSHIP
Leaderhip Training,
LKMM TD - Faculty of Marine Technology-ITS, - Surabaya 2008
Leadership Training,
LKMM Pra – TD- Himatekpal ITS, Surabaya 2007
ESQ Leadership Training
ESQ way 165 Institut Teknologi Sepuluh Nopember, Surabaya 2007
COMPUTER SKILL












STRUCTURE
ANSYS STRUCTURAL V.14 (Finite Element Method for Load Structure Analyst ),
SACS 5.3 (Structure design, In-place, Lifting, Transportation, Load out, etc.)
SAP 2000 (Periodic, Buckling and Moving Load, FEM of Steel, etc.)
STAAD Pro V.15 (Frame, Beam, Deck, Wind analyst, etc.)
MARINE
ANSYS FLUENT V.14 (FEA for Dynamic and Static Load in Fluid Motion )
ANSYS AQWA (Motion, RAO, Response of Floating Structure Analyst)
Maxsurf 13 (Design hull form and offshore/marine floating structure)
Seakeeper 13 (Motion, RAO, Response of Floating Structure Analyst)
Hydromax 13 (Strength, tank calibration, damage and stability)
Workshop 13 (weight calculation, Ship constructor)
Orcaflex (Tension mooring, Towed system, Buoy, etc.)
CAESAR II 5.2 (Stress in piping system due seismic,wind, thermal, and, static
load, Utilizing P&ID, Material Class,Pipe Isometric.)
DESIGN ENGINEERING
 SOLID WORK 2012 (Design Modeling 3D and Global Load Analyst)
 AUTOCAD 2012 for 2D and 3D (Design Modeling)
OTHER
 Operation System ( Windows XP, Windows 7 and Windows 8)
 Microsoft Office 2010 (Word - TOC, Reference, Mailing etc., Excel- Advance
Formula, Macro, Pivot Table, etc., Power Point – Developer, User Form, etc.)

PROFESSIONAL ASSOCIATION AND ORGANIZATION


INTERNATIONAL ORGANIZATION
Royal Institution of Naval Architect (RINA) – Student Member – London
United Kingdom, 2009 – 2012, member ID : 00326043
NATIONAL ASSOCIATION
Coating Association of Indonesia (Ascoatindo)-Active Member, 20122013, member ID : 1127.AP.02.12




ACADEMIC ORGANIZATION
Executive Student Organization (BEM ITS)-Student Prosperity Department Expert Staff 2010 – 2011
Executive Student Organization (BEM ITS)-Communication and
Information Department –Staff 2009 – 2010
PERS Executive Student Organization (BEM ITS)- Period 2009 – 2010
Hydro Modeling Committee Student Organization of Naval Architecture
(HIMATEKPAL) 2008-2009
EMPLOYMENT RECORD
Badan Pengkajian dan Penerapan Teknologi
Type of Business
: Engineering Consulting and Research
November 2012–30 March 2013, Freelance
Engineering Structural Design for the floating structure, frame design, weight
calculation, strength analyst, intact stability, damage load cases analyst, tank
calibration, motion analyst, based on International code such as
Germanyscher Llyod/Noble Denton, IMO, etc.
Det Norske Veritas (DNV)-PT. Denvegraha
Type of Business
: Energy, Maritime and Sustainability
July – August2012, Internship
 Involved supervisor surveys in offshore vessel construction projects in several
firms are PT Prefessional Technology Specialist, PT Hitest, PT Profab
Engineering, PT McDermott Indonesia, PT ASL Shipyard, PT Batamec, PT.
Drydock World nanindah and PT Beta Engineering
 Overview of DNV design’s Rules and Codes for Marine, offshore building and
IACS acceptances criteria.
 Classification material ,DT and NDT Material test and its Certification
 Introduction to Design, Production, PWHT, and Visual Weld Inspection to
Pressure Vessel.
 Weighing test for load crane test. Welder Test, Witnessing, Piping
Classification and Welding for DNV regulation.
 New Building Survey to supply vessel (AHTS & PSV),Floating Oil&Gas Drill
(Norshore Atlantic) for Commissioning, Inspection, Leak test, hydrotest,
Drilling system, Welder test, WPS and PQR ,
 Witnessing, Sea trial, and FMEA included introduction to dynamic positioning
technology.
 PWHT Processes and Piping classification at Survey New building of Trawler
Vessel
 Drawing check and Inspection for Helideck of Floating Oil & Gas Drill
(Norshore Atlantic) based on CAP 437 - Civil Aviation Authority
PT. Daya Radar Utama
Type of Business
: Ship yard and Marine
January - February 2009, Internship
 Involved Supervisor Activity on Vessel Building for PT. Pertamina (Persero),
Dishub, and Pelindo.
 Marine and ship structure production, Design / engineering included
assembly design, mold loft, Sea trial, engine load test, drawing check,
coating check, Bid management, Quality Control. etc.
NurulFikri (2009) & BBK Centrino (2011-2012)
Type of Bussines
: Education
To prepare student senior high school for school examination, competition
and national university entry test.
ACHIEVEMENTS
2011
2010






GOVERNMENT
2011
Student Creativity Program (PKM) from Director general of higher
education of Republic Indonesia (DIKTI-RI)
2005
2th prize of Pospenas - Medan, Sumut from Ministry of Religious
Affairs of Indonesia (Depag-RI)
ACADEMIC
2012
WORKSHOP
Getting Academic Performance Enhancement scholarship from
Institut Teknologi Sepuluh Nopember
Student Business Plan Competition
From Institut Teknolog Sepuluh Nopember (ITS)
Getting Student Learning Assistant Scholarship from Institut
Teknologi Sepuluh Nopember
NON-ACADEMIC
2009 -2011
Active to participate in several committees in Institut Teknologi
Sepuluh Nopember (ITS), Mudik Bareng ITS, International
Scholarship Exhibition, UKEME, and Dialog Interaktif with Industrial
Ministry of Indonesia MS.Hidayat
2009
Actively participate in committees Independent Team Survey for
governor general election East Java - Surabaya
LANGUAGE
ENGLISH:
 Writing
 Listening
 EFL-ITS Score
– Good
–Good
: 477
International Workshop
Introduction to Welding Engineer, Japan Welding Engineering Society (JWES) –
Nasdec, Surabaya 2011
The Innovative of Cold Arc and Force Arc Welding Technology for Industrial
Application, EWM Group Germany, PPNS –ITS Surabaya 2010
International Seminar on Advanced and Joining Technology, Asian Welding
Federation (AWF), Surabaya 2011
Other Workshop and Course
SAP for education – Information System Expo Surabaya 2011
Introduction to welding engineer – NASDEC , Surabaya 2011
SPSS – Statistic Computer Course for Engineer, Himasta ITS 2011
REFERENCE INFORMATION



Name
Relationship
Position
Email
Phone Number
Name
Relationship
Position
Email
Phone Number
Name
Relationship
Position
Email
Phone Number
: Dr. Ir. Ketut Suastika, M.Sc.
: Academic Supervisor
: Lecturer - Fakultas Teknologi Kelautan ITS Surabaya
: xxx
: xxx
: Arius Wintoro
: Internship DNV Supervisor
: Station Manager
: xxx
: xxx
: Andik Jamaludin
: Engineering Supervisor
: Consultant at Badan Pengkajian dan Penerapan
Teknologi (BPPT) - IHL Surabaya
: xxx
: xxx
I hereby certify that the above information is true and correct and I agree that
any misinterpretation made in this application for purpose of securing
employment shall be grounds for termination or denial of employment
Surabaya, December 18th 2013
Yours faithfully,
M. Syaiful Anwar