APPENDIX –F:CODES & STANDARDS
ID no. of STD
Rev/ Date
Description
British Standards Institute
BS 5308 Part 2
BS 6346
BS 6387
BS 6425 P2
2005
2005
2005
1993
Specification for PVC Insulated cables.
Electric Cables-PVC-insulated, armoured
cables for voltages of 600/1000V and
1900/3300 V
Specification for performance requirements
for cables required to maintain circuit integrity
under fire conditions.
Common tests methods for cables under fire
conditions-tests on gases evolved during the
combustion of materials from cables-Part 1:
Apparatus.
International Electro -Technical Commission (IEC)
Tests on electric and fiber optic cables under
fire conditions
Part 1-2: Test for vertical flame propagation
IEC 60332-1-2
2004
for a single insulated wire or cable-Procedure
for 1 KW premixed flame
IEC 60332-2-2
IEC 60332-3-10
IEC 60332-3-21
2004
2000
2000
IEC 60332-3-22
2000
IEC 60332-3-23
2000
Tests on electric and fiber optic cables under
fire conditions
Part 2-2: Test for vertical flame propagation
for a single small insulated wire or cableProcedure for diffusion flame.
Tests on electric cables under fire conditions
Part 3-10: Test for vertical flame spread of
vertically mounted bunched wires or cablesApparatus.
Tests on electric cables under fire conditions
Part 3-21: Test for vertical flame spread of
vertically mounted bunched wires or cablesCategory A/F/R.
Tests on electric cables under fire conditions
Part 3-22: Test for vertical flame spread of
vertically mounted bunched wires or cablesCategory A.
Tests on electric cables under fire conditions
Part 3-23: Test for vertical flame spread of
vertically mounted bunched wires or cablesCategory B.
Page 1 of 6
APPENDIX –F:CODES & STANDARDS
ID no. of STD
IEC 60332-3-24
Rev/ Date
2000
IEC 60488-1
2004
IEC 60488-2
2004
IEC 60529
2007
IEC 60751
1995
IEC 60810
2003
IEC 60811-1-1
IEC 61000-4-2
2001
2001
IEC 61000-4-3
2008
IEC 61000-4-4
2007
IEC TR 61000-5-2
1997
Description
Tests on electric cables under fire conditions
Part 3-24: Test for vertical flame spread of
vertically mounted bunched wires or cablesCategory C.
Higher performance protocol for the standard
digital interface for programmable
instrumentation
Part 1: General.
Standard digital interface for programmable
instrumentation
Part 2: Codes, Formats, Protocols and
Common commands
Degrees of Protection provided by
Enclosures (IP Codes).
Industrial Platinum Resistance Thermometer
Sensors
Electromagnetic compatibility for Industrialprocess management and control equipment
Common test methods for insulating and
sheathing materials of electric cables and
optical cables
Part1-1: Methods for general applicationSection 1: Measurement of thickness and
overall dimensions-tests for determining the
mechanical properties
Electromagnetic Compatibility (EMC) Part 42: Testing and Measurement techniquesElectrostatic discharge immunity.
Electromagnetic Compatibility (EMC) Part 43: Testing and Measurement techniquesRadiated, Radio-frequency, Electromagnetic
field immunity test.
Electromagnetic Compatibility (EMC) Part 44: Testing and Measurement techniquesElectrical fast transient/burst immunity test.
Electromagnetic compatibility (EMC) Part5:
Installation and mitigation guidelines Section
2: Earthing and Cabling.
Programmable Controllers
Part 1: General Information.
Guide for Selection of Electrical Equipment
IEC 5571
2000
for Hazardous Areas
Electrical Apparatus for Explosive Gas
IEC 60079
Atmospheres.
Institute of Electrical and Electronic Engineers (IEEE)
Surge Withstand Capability.
IEEE 472
1979
Indian Standards (IS)
IEC 61131-1
2003
Page 2 of 6
APPENDIX –F:CODES & STANDARDS
ID no. of STD
Rev/ Date
IS-1554
1988
IS-694
1990
IS-1271
1985
IS-3961
Pt1 to Pt3
IS-8130
1984
IS-5831
1984
IS-3975
1999
IS-2633
2006
IS-10810
1984
IS-2147
2004
IS-2148
2004
IS-2629
1985
IS-3624
1998
IS-5
2007
Description
Part 1- PVC insulated heavy duty electrical
cables.
PVC insulated cables for working voltages
upto and including 1100 volts.
Methods for determining thermal
classification of electric insulation.
Recommended current rating for Cables.
Conductors for insulated electric cables and
flexible cords.
PVC Insulation and sheath of electric cables.
Mild steel wires, formed wires & tapes for
armouring of cables.
Method for testing uniformity of coating of
zinc coated articles.
Methods for test of Cables.
Degrees of protection provided by enclosures
for low voltage switch gear and control gear.
Flame proof enclosures for electric
apparatus, etc:
Recommended practice for hot dip
galvanizing of Iron/steel.
Specification for Pressure and Vacuum
gauges.
Colours for ready mixed paints and enamels.
International Organization for Standardization (ISO)
Measurement of Fluid Flow by means of
pressure differential devices
ISO 5167-1
2003
Part 1: Orifice Plates, Nozzles and Venturi
Tube inserted in Circular Cross - Section
Conduits running full.
Measurement of Fluid Flow – Procedure for
the evaluation of uncertainties.
ISO 5168
2005
ISO 10790
2003
ISO/IEC-7498
1994
ISO/IEC-9594-1
2001
Measurement of Fluid Flow in Closed
Conduits-Guidance to selection, installation
and use of Coriolis meters (mass flow,
density and volume flow measurement).
Open Systems Interconnect : Basic
Reference Model
Open Systems Interconnect – Overview
Instrument Systems and Automation Society (ISA)
Instrumentation Symbols and Identification.
ISA -S5.1
1984
ISA -S5.2
1976
Binary Logic Diagrams for Process
Operations.
Page 3 of 6
APPENDIX –F:CODES & STANDARDS
ID no. of STD
Description
Rev/ Date
ISA -S5.3
1983
ISA -S5.4
1991
ISA -S5.5
1985
ISA-S18.1
2004
ISA-S20
1981
ISA- RP55.1
1983
ISA -S71.04
1985
ISA-S75.01
1995
ISA -S75.03
1992
ISA-S75.04
1995
ISA- RP75.06
1981
Graphic Symbols for Distributed
Control/Shared display Instrumentation, Logic
and Computer Systems.
Instrument Loop Diagrams
Graphic Symbols for Process Displays.
Annunciator Sequences and Specifications.
Specification forms for Process Measurement
and Control Instrumentation.
Hardware Testing of Digital Processing
Computer.
Environment conditions for process
measurement and control system:
airborne contaminants
Flow equations for sizing Control valves.
Face to Face dimensions for Flanged Control
valves.
Face to Face dimensions for Flangeless
Control valves.
Control Valve manifold designs.
American National Standards Institute (ANSI)
Metallic Gaskets for Pipe Flanges - Ring
Joint, Spiral Wound and Jacketed.
ANSI B16.20
2000
ANSI B16.11
2005
ANSI B16.28
1994
ASME B16.34
2004
ASME B16.36
2006
ASME B16.5
2003
ANSI B1.20.1
1983
ANSI / ISA MC96.1
1991
ANSI /ASME PTC19.3
1974/R2004
ANSI / FCI-70.2
2006
Forged fittings, socket welding and threaded.
Wrought steel butt welding Short Radius
Elbows and Returns.
Valves - Flanged, Threaded and Weld End.
Orifice Flanges.
Pipe flanges and flanged fittings NPS ½
through NPS 24 metric/inch standard.
Pipe threads general purpose inch series.
Temperature Measurement Thermocouples
Power Test Code – Temperature
Measurement and Apparatus.
Control valve seat leakage Standard.
American Petroleum Institute (API)
API RP520
2000
P1 Sizing, Selection and installation of
pressure relieving devices in refineries,
Part 1-Sizing and Selection.
Page 4 of 6
APPENDIX –F:CODES & STANDARDS
ID no. of STD
Description
Rev/ Date
API RP520
2003
API STD 521
2007
API 526
2002
P2 Sizing, Selection and installation of
pressure relieving devices in refineries, Part
2-Installation
Pressure Relieving and Depressuring
systems.
Flanged steel Pressure Relief Valves.
API 527
1991
Seat tightness of Pressure Relief Valves.
API MPMS
2006
Manual
of
standards.
API RP 551
1993
API STD 670
2000/R2003
ProcessMeasurement Instrumentation
Part I - Process Control & Instrumentation
Machinery Protection Systems
API 598
2004
API 607
2005/5th Edition
API -6FA
1999
Petroleum
measurement
Valve Inspection and Testing.
Fire test for soft seated, quarter turn valves.
Specification for Fire test for Valves.
German Standards (DIN)
DIN-19234
1999
Electrical Distance Sensors; DC interface for
Distance Sensor and Signal Converter.
National Fire Protection Association (NFPA)
NFPA 72
2008
Oil Industry Safety Directorate (OISD)
OISD-STD 108
1991
National Fire Protection Association
Recommended Practices On Oil Storage And
Handling
OISD-STD 113
2001
Classification of Areas for Electrical
Installations at Hydrocarbon Processing and
Handling Facilities.
OISD-STD 144
2005
LPG Gas Detection System
OISD-STD 152
1991
Safety Instrumentation for Process System in
Hydrocarbon Industry
OISD-STD 163
2004
Safety of Control Room for Hydrocarbon
Industry
Weight & Measure Act (W&M)
W&M Regulations
Custody transfer instruments shall be verified
and approved by National Weights and
Measurement as applicable. (e.g. Weighing,
flow metering, tank gauging etc.)
Page 5 of 6
APPENDIX –F:CODES & STANDARDS
International Standards & Codes
The following are most recent issue of the applicable standards and codes issued by
the following associations and approval bodies as part of this specification.
a. American Petroleum Institute (API)
b. The Instrumentation Society of America (ISA)
c. American Gas Association (AGA)
d. American Society of Mechanical Engineers (ASME)
e. American National Standards Institute (ANSI)
f.
National Association of Corrosion Engineers (NACE)
g. British Standards (BS)
h. International Electrotechnical Commission (IEC)
i.
Deutsches Institut fur Normung (DIN) - (German Standard)
j.
International Organization for Standardization (ISO)
k. Indian Standard (IS)
l.
Institute of Electrical and Electronics Engineers (IEEE)
m. NFPA National Fire Protection Association (NFPA)
Page 6 of 6