2
Foreword
IDMME – Virtual Concept 2010
From
France to Canada, Mexico, UK, the 2 international
conferences, IDMME and Virtual Concept, gathered together
industrialists, researchers, academics by fostering an international
community having the goal to foster Industrial Innovation.
From 2008, IDMME and Virtual Concept are combined in order to
make a new major event: IDMME – Virtual Concept International
Conference. IDMME – Virtual Concept is now promoting from 12
years all recent studies being able to provide new solutions,
techniques, tools or development that allow engineering to achieve
innovation.
Arts et Métiers ParisTech, ESTIA, Bordeaux 1
University and AIP PRIMECA have been teamed up in order to
present to all participants a great event that will emphasize 180 highquality presentations.
The conference chairs are pleased to welcome all participants in
China to attend to: IDMME – Virtual Concept and wish a nice stay in
Bordeaux.
The Chairs of the Conference.
X. Fischer, ESTIA
J.P. Nadeau, Arts et Métiers ParisTech
3
……………
5
2- Schedule & Program ……………
6
Contents
1- Partnership
……………
34
4- Practical Information ……………
38
……………
44
3- Industrial Exhibition
5- Publication
4
Partnership
IDMME – Virtual Concept international conference is initiated and
proposed by:
IDMME – Virtual Concept 2008 is organized with:
Associated with the Worldwide Industrial Clusters
IDMME – Virtual Concept 2010 is supported by:
IDMME – Virtual Concept 2010 is also supported by:
IDMME – Virtual Concept 2010 benefits technical partnership and association with:
IDMME – Virtual Concept 2010 benefits strong collaborations with:
5
Schedule
Tuesday, 19th of October 2010
5:00 PM
Welcoming of Participants and Registration
6:00 AM
Wednesday, 20th of October 2010
8:00 AM
Welcoming of Participants and Registration
9:00 AM
INTRODUCTION AND WELCOMING
The Chairs of IDMME - VIRTUAL CONCEPT 2010
P. MARTIN - Chair of AIP PRIMECA Network
X. FISCHER, J.P. NADEAU, Y. FOURASTIER - General Chairs of the Conference
C. McMAHON, C. MERLO - Chairs of IDMME
Y. LEDOUX, G. FADEL - Chairs of Virtual Concept
9:30 AM
IDMME - Virtual Concept 2010 Pleanry Session
Keynote Speakers:
Pr. S. TICHKIEWITCH
G-SCOP, INPG University - FRANCE
European qualification and certification for the life long learning
10:15 AM
COFFEE BREAK
10:45 AM
IDMME 1
Product Design
Process
VIRTUAL
IDMME 2
CONCEPT 1
Multiphysic Approach Interactive Simulation
for Design
VIRTUAL
CONCEPT 2
Interfaces for
Interactive Design
VIRTUAL CONCEPT 3
Special Session
Special Track GEDI
VIRMAN 1
1
Green Engineering, Human Factors in Virtual
Maintenance and
Design and Innovation
Manufacturing
12:30 AM
LUNCH – Typical Lunch – Basque Country Gastronomy
2:15 PM
VIRTUAL
IDMME 4
CONCEPT 4
IDMME 3
Collaborative Product
Team and Process
Conceptual Design
Design and
Interactive
Manufacturing
Management
VIRTUAL
CONCEPT 5
Interactive Virtual
Representation
VIRTUAL CONCEPT 6
Special Track GEDI
Special Session
2
VIRMAN 2
Green Engineering,
Interactive robotic
Design and Innovation simulation in cooperation
scenarios
4:00 PM
COFFEE BREAK
4:30 PM
IDMME - Virtual Concept 2010 Plenary Session
Subdivision-based Modelling for Design and Prototyping
Pr. WEIYIN MA
City University of Hong-Kong - China
5:15 PM
IDMME - Virtual Concept 2010 Industrial Plenary Session
« Process Capability monitoring in Airbus: From Aircraft performance characteristics to manufacturing process control »
François-Louis GODART
AIRBUS - France
6:00 PM
6:45 PM
Welcoming Cocktail and Restauration
incuding
Private Bordeaux Wine Degustation and Open Seminar
6
Thursday, 21st of October 2010
8:30 AM
IDMME 5
Knowledge in
Engineering
IDMME 6
Advanced
Manufacturing (1)
VIRTUAL CONCEPT 9
VIRTUAL CONCEPT VIRTUAL CONCEPT Special Track GEDI 3 Special Session VIRMAN
Green Engineering,
7
8
3
Design and Innovation
Virtual and Geometric
Human Centred
Virtual prototyping in
Models
Design
medicine
PROFESSIONAL
EXHIBITION OPENING
10:15 AM
COFFEE BREAK
10:45 AM
Schedule
IDMME - Virtual Concept Plenary Industrial Session
« Exemple of Turbomeca Collaborative R&T Projects Supported by Aerospace Valley Cluster »
Eric SEINTURIER
SAFRAN Turboméca - France
11:30 AM
IDMME - Virtual Concept 2010 Plenary Session
Keynote Speakers:
Pr. Judy VANCE
Iowa State University - Virtual Reality Application Center - USA
12:15 PM
LUNCH – Typical Lunch – Landes Country Gastronomy
2:15 PM
IDMME 7
Advanced
Manufacturing (2)
IDMME 8
Advanced
Manufacturing (3)
VIRTUAL CONCEPT
VIRTUAL CONCEPT
12
VIRTUAL CONCEPT
10
Special Session
11
Models for Interactive
PRIDE 1
Interactive Exploration
Design: Techniques
of Design Spaces
Advanced prototyping
and qualification
for interaction design
Special Track ICADAM 1
Global design tools,
methods and techniques
INDUSTRIAL SESSION 1
4:00 PM
COFFEE BREAK
4:30 PM
IDMME 9
Inspection and
Reverse Engineering
Techniques
IDMME 10
Product Lifecycle
Management
IDMME 11
Creativity
VIRTUAL CONCEPT
14
CAE, CAD and Virtual
Reality
VIRTUAL CONCEPT
IDMME 12
13
Special Session TRIZ-IPM
Special Session
INDUSTRIAL SESSION 2
TRIZ and Intellectual
PRIDE 2
Property Management
Virtual and mixed
reality for design
6:15 PM
7:00 PM
Gala Dinner
CHÂTEAU DE BORDEAUX LUCHEY HALDE
including visit of Wine Production Unit
7
Friday, 22nd of October 2010
Schedule
9:00 AM
IDMME 13
Tolerancing in
Design and
Manufacturing
IDMME 14
DFA and DFM
VIRTUAL
CONCEPT 16
Behavioural
Simulation
VIRTUAL
CONCEPT 17
Assistance and
Virtual Reality
VIRTUAL CONCEPT
15
Special Track ICADAM
Special Session
2
PRIDE 3
Extended and virtual
factory
Advanced tools for
early product design
10:45 AM
COFFEE BREAK
11:15 AM
IDMME 15
Process and
Production
Management
IDMME 16
Re-Design
VIRTUAL
CONCEPT 18
Robust
Manufacturing
VIRTUAL
CONCEPT 19
Risk Prevention
Special Track
ICADAM 3
Information
technology for global
design and
manufacture
12:45 AM
TYPICAL LUNCH - THEME: Gastronomy from Gironde (south of France)
Chairs' Closing Communication and Futur Event
2:00 PM
TOURISTIC TOURS OF BORDEAUX AND CHATEAUX
8
IDMME 17
Special Session
MEST4ADM
MEthods and Simulation
Tools for Assembly
Design and
Manufacturing
THURSDAY 20TH OF OCTOBER 2010
8:00 AM
Plenary
Session
Room
9:00 AM
Welcoming of Participants and Registration
IDMME-Virtual Concept Opening Ceremony:
P. Martin
X. Fischer, J.P. Nadeau
Y. FourastierC. McMahon, C.Merlo
Y. Ledoux, G. Fadel, X. Fischer
Director of AIP PRIMECA
General Chairs
Aerospace Valley
IDMME Chairs
Virtual Concept Chairs
IDMME-Virtual Concept Keynote Speaker:
Pr. S. Tichkiewitch –EMIRAcle (Europe), INPG (France)
European qualification and certification for the life long
learning
10:15 AM
Coffee Break
10:45 AM
IDMME Thematic Sessions:
Room 1
Product Design Process
R. Rai, P. Killaru
A novel search algorithm for interactive automated
A. A. Ammar, D. Scaravetti, JP Nadeau
A heuristic method for functional aggregation
within design process
10:45 AM
Room 2
Multiphysic Approach
L. Pierre, D. Teissandier, J-P Nadeau
Qualification of turbine architectures in a
multiphysical approach: application to a turboengine
Wednesday, October 20TH
10:45 AM
Room 2
10:45 AM
Room 3
Bordeaux, France - 2010
V. Dupé, A. Briand, X. Fischer
System level modelling of autonomous microsystem
Fernando Santos Osorio, Denis Wolf, Kalinka Castelo
Braco, Gustavo Pessin
Mobile robots design and implementation: from
virtual simulation to real robots
Virtual Concept Thematic Sessions:
Interactive Simulation for Design
Z. Wang, G. Dumont
Real time interaction with deformable industrial
cad model through haptic interface in VR
Ren Ren, D. Ratko, Guoheng Chen, C.Q. Zhou
Visualizing the blast furnace
L. Adam, A. Daidie, B. Castanie, E. Bonhomme
Explicit
simulation
and
high-performance
computing, application to a bolt tensile test
Bin Wu, Dui Huang, D. Ratko, C.Q. Zhou
CFD and VR application in coal fired power
generation components
10:45 AM
Room 4
Interfaces for Interactive Design
T. Ingrassia, A. Mancuso
A new user interface for human-computer
interaction in virtual reality environments
Leith Chan, Henry Y. K. Lau
The magicpad: a spatial augmented reality based
user interface
R. Radkowski, M. Linnemann
A user study on visual effects of high dynamic
range images and tone mapping in augmented
reality applications
10
Wednesday, October 20TH
Bordeaux, France - 2010
10:45 AM
Room 5
IDMME-Virtual Concept Special Tracks and Sessions:
Green Engineering, Design and Innovation (1)
Chair: Pr. Dominique Millet, SupMéca, France
S. Le Pochat, G. Trebossen, F. Bouton
Ergo and Eco design for a win-win situation : a case
study
B. Tyl, J. Legardeur, D. Millet, F. Vallet
Stimulate creative ideas generation for ecoinnovation: an experimentation to compare ecodesign and creativity tools
J. Garcia, Pierre Tonnelier
Preliminary study for a life cycle assessment of a
hybrid electric vehicle
J-P Chevalier, J-M Ruiz
Tracking for Innovation, the spins-off of a Solar
Tracking System Design
10:45 AM
Room 6
VIRMAN 1: Human Factors in Virtual Maintenance and
Manufacturing
Chairs: G. Di Gironimo, A. Lanzotti, University of Naples
Frederico II, Italy
A. De Santis, G. Di Gironimo, L. Pelliccia, B. Siciliano , A.
Tarallo
Human-like motion generation for a virtual manikin
F. De Crescenzio , Fantini Massimiliano
Implementing augmented reality to aircraft
maintenance: a daily inspection case study
11
Wednesday, October 20TH
Bordeaux, France - 2010
10:45 AM
Room 6
G. Di Gironimo , C. Di Martino, A. Lanzotti, A. Marzano,
G. Russo
A Virtual Ergonomics approach to predetermine
after-sales services times in automotive industry
M. Guida , P. Leoncini
Information-preserving procedural translation of
cad data to dynamics-simulated VR environments
12:30 AM
Lunch – Typical Lunch – Basque Country Gastronomy
2:15 PM
IDMME Thematic Sessions:
Room 1
Conceptual Design
Ndrianarilala Rianantsoa, B. Yannou, Romaric Redon
Dynamics of definition and evaluation of value
creation strategies and design concepts
G. Cortes Robles, S. Negny, G. Alor Hernández, A.
Aguilar Lasserre, U. Juarez Martinez, D. Huerta Harris
Case based design and TRIZ: a knowledge based
design process
Jing XU, R. Houssin, E. Caillaud, M. Gardoni
Innovation in design by using the approach of
knowledge management
12
Wednesday, October 20TH
Bordeaux, France - 2010
2:15 PM
Room 2
Collaborative Product Design and Manufacturing
W. Abrahao Dos Santos, A. Hardwick, B. F. Leonor, S.
Stephany
Enabling collaborative conceptual design and
knowledge management for space systems
projects
G. Prudhomme, K. Lund, J. L. Cassier
Benefits of a research methodology from
organisational sciences for analysing design
interactions
E. Ostrosi, Ya Min Li, M. Ferney
Using consensus evaluation in collaborative and
distributed engineering design
M. Gonçalves, D. Teissandier, P. Girard
Transfer of project specifications applied to use of
performance indicators
2:15 PM
Room 3
Virtual Concept Thematic Sessions:
Team and Process Interactive Management
R. Raffaeli, A. Cesetti, G. Angione, L. Lattanzi, S. Longhi
A framework for flexible and autonomous reliability
tests of household appliances supported by virtual
planning
M. Mobach
Escaping paper flatland
J. Benabes, F. Bennis, E. Poirson, Y. Ravaut
A new approach for specifying and solving layout
problems
A. Jakjoud, G. Auriol, C. Baron, M. Zriken
Proposing
a
solution
to
couple
project
management process to product design process:
Re-planning phase
13
Wednesday, October 20TH
2:15 PM
Room 4
Bordeaux, France - 2010
Interactive Virtual Representations
Hiroaki Date, Furukawa Hiromu, Onosato Masahiko
Efficient cutaway model generation for interactive
cutaway viewing system
Daisuke Iyoda, Satoshi Kanai, Yui Endo, Hideki
Sakamoto, Naoki Kanatani
Appearance preserving simplification of large scale
assembly models by invisible part and form feature
removal
M. Buzzi, G. Colombo, G. Facoetti, S. Gabbiadini, C.
Rizzi
A new design framework for lower limb prosthesis
Mounir Hamdi, Nizar Aifaoui, Borhen Louhichi,
Abdelmajid BenAmara
Simplification of CAD geometry using a hybrid
method
2:15 PM
Room 5
IDMME-Virtual Concept Special Tracks and Sessions:
Green Engineering, Design and Innovation (2)
Chair: Pr. Dominique Millet, SupMéca, France
Heng Feng, S. Rohmer
Dictionary of elementary effects: a new functional
approach for supporting the formulation of
validated functional performance specification in
earlier design phase
O. Pialot, D. Millet, N. Tchertchian
How to define upgrade scenarii in early design
phases of remanufactured product
N. Perry, O. Mantaux, D. Leray, T. Lorriot
Composite recycling: design for
approach requirements
14
environment
Wednesday, October 20TH
Bordeaux, France - 2010
2:15 PM
Room 5
2:15 PM
Room 6
V. Larroudé, P-A Yvars, D. Millet, R.chenouard, A.
Bernard
Inversion of emission model using constraint
propagation on tables and intervals - Application
to Ship-Ecodesign
VIRMAN 2
scenarios
Interactive
robotic
simulation
in
cooperation
Chairs: G. Di Gironimo, A. Lanzotti, University of Naples
Frederico II, Italy
A. Angelo O., Leali Francesco, Pellicciari Marcello, Pini
Fabio, Vergnano Alberto
Virtual prototype based method for hybrid
reconfigurable assembly systems design in top class
automotive industry
Cordella Francesca, Zollo Loredana, Guglielmelli
Eugenio, Siciliano Bruno
A bio-inspired strategy for optimal grasp of an
anthropomorphic robotic hand
San Martin Jose
Optimal performance of haptic devices in training
virtual environments
4:00 PM
Coffee Break
15
Wednesday, October 20TH
4:30 PM
Plenary
Session
Room
5:15 PM
Plenary
Session
Room
Bordeaux, France - 2010
IDMME-Virtual Concept Keynote Speaker:
Pr. Weiyin Ma
City University of Hong-Kong, China
Subdivision-based Modelling
Prototyping
for
Design
and
IDMME-Virtual Concept Industrial Plenary Session:
F.L. Godart
AIRBUS EADS, France
Process Capability monitoring in Airbus: From
Aircraft
performance
characteristics
to
manufacturing process control
6:00 PM
Plenary
Session
Room
6:45 PM
IDMME-Virtual Concept Keynote Speaker:
Pr G. Dumont
IRISA, France
User Centred Virtual Prototyping
Welcoming Cocktail and Restauration
incuding
Private Bordeaux Wine Degustation and Open Seminar
16
Thursday, October 21ST
Bordeaux, France - 2010
THURSDAY 21TH OF OCTOBER 2010
8:30 AM
Room 1
IDMME Thematic Sessions:
Knowledge in Engineering
C. Rizzi, G. Colombo, M. Scotto
A knowledge based application to enhance fired
heater design
Y. Huang, M. Gardoni, A. Coulibaly
A decision support system designed for
knowledge
integration
into
personalized
maintenance document
C. Numthong
The integration of knowledge and feature-based
modelling for wood furniture design and
manufacturing
N. Ahmad, D. C. Wynn, P. John Clarkson
When should design changes be allowed to
accumulate?
8:30 AM
Room 2
Advanced Manufacturing (1)
S. Pateloup, H. Chanal, E. Duc.
Productivity improvement for preformed part
machining with PKM
M. Cherif, J-Y. K'nevez, A. Ballu.
Thermal aspects on robot machining accuracy
A. Sergent, H. Bui-Minh, H. Favreliere, D. Duret, S.
Samper, F. Villeneuve.
Identification of machining defects by Small
Displacement Torsor and form parameterization
method
17
Thursday, October 21ST
8:30 AM
Room 2
8:30 AM
Room 3
Bordeaux, France - 2010
T. Bonnemains, H. Chanal, B. Belhassen-Chedli, P. Ray
Dynamic analysis of the Tripteor X7: model and
experiments
Virtual Concept Thematic Sessions:
Virtual and Geometric Models
A. Bargier, A. Mikchevitch, J-P. Pernot.
Automatic reconstruction of 3D partitions from
exported non-manifold models
S. Pena Serna, A. Stork, D. W. Fellner.
Embodiment mesh processing
8:30 AM
Room 4
M. Calderan, G. Conti, R. de Amicis.
A voronoi based tessellator for digital elevation
models
Human Centred Design
Y. Liu, Z. Kosmadoudi, R. Sung, T. Lim, S. Louchart, J.
Ritchie.
Capture User Emotions during Computer- Aided
Design
L. Ma, R. Ma, D. Chablat, F. Bennis
Using virtual human for an interactive customeroriented constrained environment design
E. Poirson, J-F Petiot, E. Aluiouat, L. Boivin, . Blumenthal
Study of the convergence of Interactive Genetic
Algorithm in iterative user’s tests: application to
car dashboard design
C. Magnier, G. Thomann, F. Villeneuve, P. Zwolinski
Investigation on methods for the design of
assistive device: ucd and medical tools
18
Thursday, October 21ST
Bordeaux, France - 2010
8:30 AM
IDMME-Virtual Concept Special Tracks and Sessions:
Room 5
Green Engineering, Design and Innovation (3)
Chair: Pr. Dominique Millet, SupMéca, France.
Andriankaja, G. Bertoluci, D. Millet
An environmental typology per range of products
used as a streamlining strategy for setting up the
LCA within the design team
F. Cluzel, D. Millet, Y. Leroy, B. Yannou
Relative contribution of a subsystem to the
environmental impact of a complex system:
application to aluminium electrolysis conversion
substations
W. Samet, Y. Ledoux, J-P Nadeau
Eco-innovation
tool
for
application on a waffle iron
8:30 AM
Room 6
Mal’in
software,
VIRMAN 3 VIRtual environments and prototyping for huMAN
health and safety
Chairs: G. Di Gironimo, A. Lanzotti, University of Naples
Frederico II, Italy
F. Pasquale, M. Massimo, M. Gaetano, S. Gilberto
Stress distribution on the bone tissue: a preliminary
comparative study of different fixture designs
F. Massimiliano, F. De Crescenzio, C. Leonardo, R. Scotti
Nasal prosthetic rehabilitation: a virtual and
physical prototyping approach
A. Di Luca, P. Di Stefano , A. Spezzaneve
Symmetry line detection for non-erected postures
R. Meneghello , G. Savio, A. Cerardi
An integrated methodology for the evaluation of
bite force and contact area in removable
complete dentures
19
Thursday, October 21ST
10:45 AM
Plenary
Room
Bordeaux, France - 2010
IDMME - Virtual Keynote Speakers
Example of Turbomeca Collaborative R&T Projects
Supported by Aerospace Valley Cluster
Keynote Speaker: Eric SEINTURIER
SAFRAN Turboméca - France
11:30 AM
Plenary
Room
IDMME - Virtual Concept 2010 Plenary Session
12:15 AM
Lunch – Typical Lunch – Landes Country Gastronomy
2:15 PM
IDMME Thematic Sessions:
Room 1
Pr. Judy VANCE
Iowa State University, Virtual Reality Application Center USA
Challenges in developing virtual environments for
product assembly and maintenance
Advances Manufacturing (2)
G. Chardon, H. Chanal, E. Duc
Finishing process of mold in composites material
with an abrasive diamond tool
M. Brissot, A. Brient, J-C Sangleboeuf, T. Rouxel
Grinding of glass : optimization of process
parameters to improve surface roughness
H. Karaouni, B. Souvestre, Y. Ahipo
Machining advanced simulation: distortion
prediction of prestressed machined parts in
NCSIMUL environment
20
Thursday, October 21ST
Bordeaux, France - 2010
2:15 PM
Room 1
2:15 PM
Room 2
G. Guire, L. Sabourin, G. Gogu, E. Lemoine
Robotic cell : application to meat cutting
Advanced Manufacturing (3)
R. Royer, P. Darnis, R. Laheurte, A. Gérard, O. Cahuc
Development of a strain-gradient plasticity
behaviour law for use in machining processes.
B. Blaysat, E. Florentin, P. Ladeveze
Verification for visco-plastic behaviour : first results
for local quantities of interest
G. Albert, P. Darnis, J-Y K’Nevez, R. Laheurte, O. Cahuc
Milling
experimental
model:
adding
the
component of moment
A. Guiot, C. Tournier, L. Mathieu
Simulation of the material removal rate and tool
wear to improve 5-axis automatic polishing
operations
2:15 PM
Virtual Concept Thematic Sessions:
Room 3
Models for Interactive Design: Techniques and qualification
J. Moreland, B. Wu, C. Zhou
Venturi scrubber analysis and optimization with
computational fluid dynamics and virtual real
R. Kang, H. Chanal, T. Bonnemains, S. Pateloup, P. Ray
Forward kinematics model of parallel kinematics
machine tool using neural network
A. Collignan, P. Sebastian, J. Pailhes, Y. Ledoux
Qualification of solutions in mechanical design
through the concept of elasticity
21
Thursday, October 21ST
2:15 PM
Room 4
Bordeaux, France - 2010
Interactive Exploration of Design Spaces
E. Aliouat, D. Blumenthal, J-F Petiot, M. Danzart, J-M
Sieffermann
Contribution to the selection of products for
evaluation tests: How to select products for the
study of a particular semantic dimension?
T. Quirante, Y. Ledoux, P. Sebastian
Design
optimization
of
evaporators: a trade-off
objectives
C. Favi, M. Germani
Method to optimize
assembly
two-stage
flash
between design
conceptual
design
for
E. Di Pasquale, G. Gielczynski
Multi disciplinary optimization of railways systems
2:15PM
IDMME-Virtual Concept Special Tracks and Sessions:
Room 5
PRIDE 1: Advanced Protoyping for Interaction Design
Chairs:
S. Kanai, Hokkaido University, Japan
J. Verlinden, Delft University, The Netherlands
J-W Kim, T-J Nam
Event code generator: an event authoring tool
for reflective interaction design prototyping
M. Mengoni, M. Peruzzini
Usability Assessment to address Interaction Design
S. Kanai, T. Higuchi, Y. Kikuta
XAML-based usability assessment for prototyping
information appliances with touch sensitive
interfaces
22
Thursday, October 21ST
Bordeaux, France - 2010
2:15PM
Room 6
ICADAM 1: Global Design Tools, Methods and Techniques
Chairs:
B. Eynard, UTC, France
L. Roucoules, Arts et Métiers ParisTech, France
Xiu-Tian Yan, University of Strahclyde, UK
Louis Rivest, Fawzi Kheddouci, Fortin Clément
Towards long-term archiving of 3D annotated
models: a sneak peek to a potential solution
Yuemin Houi
Identifying key parameters in creative design
Thitiyam Manakitsirisuthi, Yacine Ouzrout, Abdelaziz
Bouras
A PLM environmental knowledge management
system
Yuemin Hou
Building design representation space: building
blocks
Room 7
Industrial Session 1
Name of Presenter
Title
4:00 PM
Coffee Break
4:30 PM
IDMME Thematic Sessions:
Room 1
Inspection and Reverse Engineering Techniques
G. Duane Storti
Using Lattice Data to Compute Surface Integral
Properties of Digitized Objects
23
Thursday, October 21ST
4:30 PM
Room 1
4:30 PM
Room 2
Bordeaux, France - 2010
R. Chenouard, C. Da Cunha, F. Laroche, A. Bernard
Model-based design of exploitation guidelines
N. Troussier, M. Bricogne, A. Durupt, F. Belkadi, G.
Ducellier
A knowledge-based reverse engineering process
for CAD models management
Product Lifecycle Management
K. Gaye, M. Gardoni, A. Coulibaly
An information system to support the recycling
process of manufactured products
N. Lahonde, J-F Omhover, A. Aoussat
Designers Needs Analysis for
Selection of Design Methods
Assisting
the
A. Dkhil, M. Barth, D. Damand
Visual structure for preliminary design of physical
production system
4:30 PM
Room 3
Creativity
A. Kendira, A. Jones, G. Lehoux, T. Gidel, S. Buisine,
D. Lenne
Project tatin: creativity and collaboration during a
preliminary product design session using an
interactive tabletop
D. Choulier
Distribution of animation roles in a technical
creativity meeting
L. Maria Jimenez, M. Gardoni
Reflections on creative and collaborative
teamwork in charrettes, 24 hours of innovation
24
Thursday, October 21ST
Bordeaux, France - 2010
4:30 PM
Virtual Concept Thematic Sessions:
Room 4
CAE, CAD and Virtual Reality
E. Madalina Ioana Toma, Florin Stelian Girbacia, Csaba
Antonya
Movement patterns of design engineer in desktop
and immersive environments
A. Fraj, T. El Halabi, M. Budinger, J-C Maré.
Coupling CAD and system simulation framework
for the preliminary design of electromechanical
actuators
M. Riggio, M. Santini, R. De Amicis, M. Torrente
Use of X-ray tomography and CAD techniques for
"morphology-based" wood elements models
4:30 PM
IDMME-Virtual Concept Special Tracks and Sessions:
Room 5
PRIDE 2: Virtual and Mixed Reality for Design
Chairs:
S. Kanai, Hokkaido University, Japan
J. Verlinden, Delft University, The Netherlands
Kenjiro T. Miura, Shin'ichi Agari, Makoto Fugisawa,
Takashi Hada, Tomonobu Nishikawa
Input of compound-rhythm log-aesthetic curves
and its applications for car styling design
Hideki Aoyama, Kengo Nieda, Mio Matsumoto
Development of system to support and evaluate
chair design
Monica Bordegoni, Francesco Ferrise, Joseba Lizaranzu
Multimodal interaction with a household
appliance based on haptic, audio and
visualization
25
Thursday, October 21ST
4:30 PM
Room 5
4:30PM
Room 6
Bordeaux, France - 2010
Yui Endo, Natsuki Miyata, Makiko Kouchi, Masaaki
Mochimaru, Satoshi Kanai
Shape interpolation of product housings for
ergonomic
assessment using digital hand
TRIZ-IPM: Triz and Intelectual Property Management
Chairs:
Caterina Rizzi, Università di Bergamo, Italy
G. Cascini, F. Rotini.
TRIZ-based Networks of Evolutionary
supporting R&D Strategy Definition
Trends
D. Russo, T. Montecchi, D. Regazzoni
A systematic exploration for conceiving function
and behaviour of a new technical system
J. Peeters, P. A. Verhaegen, D. Vandevenne, J.R. Duflou
Refined metrics for measuring novelty in ideation
A. Salas-López, R. López-Flores, D. Hernández-Marín, G.
Cortes-Robles, J. Alor-Hernandez
A framework for assisting the innovation process
by using TRIZ- based Web services
4:30PM
Industrial Session 2
Room 7
7:00 PM
Gala Diner – Château De Bordeaux LUCHEY HALDE
Including the visit of the ”Chateau”
26
Friday, October 22ND
Bordeaux, France - 2010
FRIDAY 22TH OF OCTOBER 2010
9:00 AM
IDMME Thematic Sessions:
Room 1
Tolerancing in Design and Manufacturing
A. Ballu, A. Jay, P. Darnis
Experimental evaluation of convex
surface for planar joint study
difference
V. Wolff, A. Lefebvre, D. Pachel, J. Thijs
Capability of a measuring machine : case of an
optical measuring machine without contact
M. Zhang, N. Anwer, L. Mathieu
Discrete geometry for product specification and
verification
J.-M. Judic
A new method for product and process
tolerancing for industrial processes not daily
adjustable in mass production. Improvement
proposal to W.A Taylor process tolerancing
method.
9:00 AM
Room 2
DFA and DFM
H. Rodrigue, M. Rivette
An
assembly-level
design
manufacturing methodology
for
additive
J. Gardan, L. Roucoules
Characterization of beech wood pulp towards
sustainable rapid prototyping
P. Mons, L. Tapie, L. Mathieu, B. Dantin, N. Chevassus
Modular design for complex systems
27
Friday, October 22ND
9:00 AM
Room 3
Bordeaux, France - 2010
Virtual Concept Thematic Sessions:
Behavioural Simulation
E. Florentin, G. Lubineau
Identifiying product behaviour using constitutive
equation gap method
E. Letzelter, J.-P. De Vaujany, M. Guingand, P. Schlosser
Load sharing model and thermal study for polymer
cylindrical gears
M. Paredes, M. Sartor, N. Nefissi
Study of an interference fit fastener assembly
9:00 AM
Room 4
Assistance and Virtual Reality
B. Morkos, T. Rilka, J. Taiber, J. Summers, L. Mears,
G. Fadel
Applicability evaluation of mobile devices for use
within manufacturing environments
M. Bordegoni, U. Cugini, F. Ferrise
Analysis of designers’ manual skills for the
development of a tool for aesthetic shapes
evaluation
D. Magliocchetti, G. Conti, R. De Amicis
I-Move: a framework for interoperable mobile 3d
geobrowsers
28
Friday, October 22ND
Bordeaux, France - 2010
9:00 AM
IDMME-Virtual Concept Special Track and Sessions:
Room 5
PRIDE 3 : Advanced tools for early product design
Chairs:
S. Kanai, Hokkaido University, Japan
J. Verlinden, Delft University, The Netherlands
Kenjiro T. Miura, Shin'ichi Agari, Makoto Fugisawa,
Takashi Hada, Tomonobu Nishikawa
Input of compound-rhythm log-aesthetic curves
and its applications for car styling design
Hideki Aoyama, Kengo Nieda, Mio Matsumoto
Development of system to support and evaluate
chair design
Monica Bordegoni, Francesco Ferrise, Joseba Lizaranzu
Multimodal interaction with a household appliance
based on haptic, audio and visualization
Yui Endo, Natsuki Miyata, Makiko Kouchi, Masaaki
Mochimaru, Satoshi Kanai
Shape interpolation of product housings for
ergonomic assessment using digital hand
9:00 AM
Room 6
ICADAM 2: Extended and virtual factory
Chairs:
B. Eynard, UTC, France
L. Roucoules, Arts et Métiers ParisTech, France
Xiu-Tian Yan, University of Strahclyde, UK
R. Derroisne, V. Cheutet, S. Lamouri, R. Costa Affonso,
B. Fricero, H. Falgarone
Multi-scales
simulations
in
digital
factory,
experiment on an aeronautical example
P. Farrugia, E. Francalanza, G. Attard, J. Borg
Factory planning through paper-based computeraided sketching
29
Friday, October 22ND
9:00 AM
Room 6
Bordeaux, France - 2010
N. Anwer, Y. Yi-Jun, Z. Haibin, O. Coma, J.-C. Paul
Reverse engineering for NC machining simulation
10:45 AM
Coffee Break
11:15 AM
IDMME Thematic Sessions:
Room 1
Process and Production Management
C. Perotti, S. Minel, B. Roussel, J. Renaud
Managing complex industrial change
projects
trough
A. Mostafaeipour, M.S. Fallahanezhad
Implementation of agile manufacturing into value
engineering technique for industries
A. Valles, J. Sanchez, E. Colin, A. Aldape
Identification of technical factors in the sucess of
cellular manufacturing applications by metaanalysis approach
W. Derigent
Product-driven process planning and evaluation
11:15 AM
Room 2
Re-Design
L. Domingo, F. Mathieux, J. Bonvoisin, D. Brissaud
Indicator for in use energy consumption (IUE): a
tool enhancing design for energy efficiency of
products
N. Janthong, D. Brissaud, S. Butdee
Redesigning of industrial products by adaptation
design
30
Friday, October 22ND
Bordeaux, France - 2010
11:15 AM
Room 2
S. Butdee, S. Manokruang
Knowledge capitalization to bus body light weight
redesign and validated by FEM
Carlos A. Costa
The application of an interaction based
information structure to support design reuse
11:15 AM
Room 3
Virtual Concept Thematic Sessions:
Robust Manufacturing
G. Niu, H. Sun, P. Lafon, L. Roucoules
A Predictive-reactive Approach
uncertain processing times
for
JSP
with
J. Astoul, M. Sartor, E. Mermoz
A simple and robust method for spiral bevel gear
generation and tooth contact analysis
H. Bui-Minh, A. Sergent, F. Villeneuve, D. Duret
Assessment
of
impact
of
calculation
methodologies on defect determinations in
manufacturing
S. Rizzuti, F. Giampà
A mixed approach for robust design integrating
Taguchi method in axiomatic design
11:15 AM
Room 4
Risk Prevention
F. Ostiategui, A. Amundarain, A. Lozano, L. Matey
Gardening work simulation tool in virtual reality for
disabled people tutorial
F. Camus, D. Lenne, E. Plot
Toward a methodology for designing virtual
environments for risk prevention: The MELISSA
model
31
Friday, October 22ND
11:15 AM
Room 4
Bordeaux, France - 2010
P. Huang, O. Khan
Virtual reality based safety system
11:15 AM
IDMME-Virtual Concept Special Track and Sessions:
Room 5
ICADAM 3: Information technology for global design and
manufacture
Chairs:
B. Eynard, UTC, France
L. Roucoules, Arts et Métiers ParisTech, France
Xiu-Tian Yan, University of Strahclyde, UK
Y. Rhahli, M. Bosch, B. Anselmetti, B. Eynard
A survey on tolerancing task integration in PLM
R. Cann, P. Farrugia, M. Fenech, A. Bonnici
Towards sketch-based modelling for laser cladding
K. Wang, S. Tong, N. Matta, L. Roucoules, B. Eynard
Ontology building of manufacturing quality
knowledge for design decision support
Room 6
MEST4DAM: MEthods and Simulation Tools for Assembly
Design and Manufacturing
Chairs:
A. Rivière, SupMéca, France
Stanislao Patalano, University of Naples
Frederico II
G. Mandil, A. Desrochers, A. Rivière
Assembling coordinate free representations for the
calculation of geometric variations
A. Coulibaly , F. de Bertrand de Beuvron, J. Renaud
Maintainability assessment at early design stage
using advanced cad systems
32
Friday, October 22ND
Bordeaux, France - 2010
J. Serrano-Mira, J. V. Abellan-Nebot, F. Romero-Subiron
From function to manufacturing: a framework for
optimum tolerancing in multi-stage machining
processes
P. Franciosa, S. Gerbino, S. Patalano, A. Rivière.
Early Fast Analysis of the Effect of Different Fixture
Configurations in Compliant Assembly Design
12:30 AM
Lunch – Typical Lunch – Gironde Country Gastronomy
Chair's Closing Communication and Future Event
2:00 PM
Touristic tours of Bordeaux and chateaux
(pre-reservation required)
33
Industrial Exhibition
Esi Group Page 1
34
Esi Group Page 2
35
Industrial Exhibition
Immersion page 1
36
Immersion Page 2
37
Conference Location
Location :
The conference IDMME-VIRTUAL CONCEPT 2010 is held in ARTS ET
METIERS PARISTECH – Centre de Bordeaux Talence.
Esplanade des Arts et Métiers
33405 Talence - France
: +33 556 845 333
From the International Airport of Bordeaux to the Conference
Centre :
The conference Centre is around:
- 25 minutes (in Taxi) from the Bordeaux-Merignac International
Airport,
- From 15 minutes (in taxi) to 30 minutes (in Tram) from Bordeaux
Citry Downtown.
The most convenient solution to go from the airport to the
conference place is the taxi. Taxi price is around 30€.
From Bordeaux downtown to the conference centre, we suggest
you to choose the Tram: Conference Organization offers to you the 3
day pass for free acces to the Tram service.
In order to go to the conference centre, show the French text below
to the taxi driver: “I am going to the Conference Centre”.
Pourriez vous, je vous prie, me conduire
à
L’Ecole Nationale Supérieure des
Arts et Métiers
sur le Campus Universitaire, à Talence,
Merci…
38
Ground Transportation
Bus and Tram Lines from Bordeaux City Downtown :
All participants can take the bus and tram lines with the 3 Days pass
offered by the conference organization.
The ticket must be registered each times of entering in a bus or a
tram.
Between Conference Centre and International Airport:
Catch the Bus Number “Liane 1” from Airport to “Place des
Quinconces” (0h45) and, next, the “Tramway B towards “Pessac”
(0h30) getting off at the “Arts et Métiers” station (15€). The airport bus
is available from 7:00AM to 11:00 PM each 10 minutes.
For returning to the Bordeaux-Merignac International Airport,
schedule, with Taxi:
- 1h from Bordeaux Downtown,
- 45 minutes from Conference Centre.
39
Help
In order to well-organize your return, you can show the following texts
to the driver:
“I am going to the international
airport”
“I must be in the airport no later
than
- write hour on the sign ……-“
Je voudrais me rendre à
l’aéroport de BordeauxMérignac
Mon avion est prévu à
………………………
And my airline company is
- write hour on the sign ……-“
Ma compagnie aérienne
est :
………………………….
“Thank You”
Merci
40
To Arrive to the Conference Centre Entrance:
Leaving the Tram, go on the right hand, and follow the first road on
the right. The conference centre is on your right.
line
Maps
m
Tra
41
Across the Conference Centre:
To the lunch (2nd floor)
Room 7
Room 6
Room 5
Room 4
Plenary session room
Maps
(La Rochefoucauld Liancourt)
Room 1
Room 2
Room 3
Entrance – Welcome hall
REGISTRATION DESK
Location of registration Desk and Professional Exhibition:
Registration desk and professional exhibition are both located in the
entrance area of the conference centre
Location for Sessions:
Sessions of conference are located in first fllor of the conference
centre
42
Practical Information
Cocktail Party, Gala Dinner and Lunches:
Cocktail Party is organized in the entrance hall.
Lunches are proposed in the first floor of the conference centre.
Private buses going to Gala Dinner centre will start from the
conference centre at 6:30PM; Buses will cross the city of Bordeaux
after the gala dinner, passing by the hotels proposed by IDMMEVirtual Concept travel agency.
Useful Advice:
Credit Card:
The using of credit cards is widespread in France, Excepted for Taxi.
Electricity:
Electricity supply is 380V at 50Hz. A plug adaptator for Asian,
Australian and American plugs fitting European standards are
required.
Tips:
Tips are appreciated in France but are not necessary.
Conference Registration:
Participants registered to IDMME-Virtual Concept 2010 benefit:
o Free Access to sessions,
o the Cocktail Party,
Workshops and professional
o the
book
“Research
in
exhibition,
Interactive Design” published
o The proceedings of the
with Springer Verlag including
conference,
all
papers/workshops/tutorials
o the 6 Coffee Breaks,
(directly sent on December),
o the Cocktail Party,
o Conference materials and gift,
Gala Dinner and Lunches may be separately reserved. Full
registration being all inclusive is also available.
All participants already being registered are invited to present
themselves to the conference registration desk. Conference
materials will be supplied.
Immediate registration is possible to the registration desk (not
including the gala dinner).
43
Publication
Publication of Articles by Springer Verlag:
All articles are published in the book “Research in Interactive Design
– Vol. 3” published with Springer Verlag.
Publications have been accepted after twice review process
realized by the IDMME-Virtual Concept 2008 international scientific
board of referees.
44
44
Post-Publication in International Journals:
Publication
Best Articles will be selected for a publication in one of the
international journals being partner of IDMME-Virtual Concept 2010.
Only for IDMME
Only for Virtual Concept
45