International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an
International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When
consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft
International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is
subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 November to 30 November 2011
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 4
Rolling bearings
ISO/CD 492
Rolling bearings — Radial bearings — Dimensional and geometrical tolerances
TC 17
Steel
ISO/WD 5950
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing
qualities
TC 21
Equipment for fire protection and fire fighting
ISO/NP 7076-5
Fire protection — Foam fire extinguishing systems — Part 5: Compressed air foam equipment
TC 22
Road vehicles
ISO/NP 10924-3
Road vehicles - Circuit breakers — Part 3: Miniature circuit breakers
ISO/NP 13674-2
Road vehicles — Test method for the quantification of on-centre handling — Part 2: Transition test
ISO/NP 12614-3
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 3: Check valve
ISO/NP 12614-4
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 4: Manual valve
ISO/NP 12614-5
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 5: Automatic valve
ISO/NP 12614-6
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 6: Tank pressure
gauge
ISO/NP 12614-7
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 7: Overpressure
regulator
ISO/NP 12614-8
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 8: Pressure relief valve
- primary
ISO/NP 12614-9
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 9: Pressure relief valve
- secondary
ISO/NP 12614-10
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 10: Excess flow valve
ISO/NP 12614-11
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 11: Gas-tight housing
and ventilation hose
ISO/NP 12614-12
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 12: Rigid fuel line in
stainless steel
ISO/NP 12614-13
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 13: Fittings
ISO/NP 12614-14
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 14: Rigid fuel line in
material other than stainless steel
ISO/NP 12614-15
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 15: Pressure control
regulator
ISO/NP 12614-16
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 16: Differential
pressure fuel content gauge
ISO/NP 12614-17
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 17: Capacitance fuel
content gauge
ISO/NP 12614-18
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 18: Heat exchanger vaporizer
ISO/NP 12614-19
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 19: Natural gas
detector
ISO/NP 12614-20
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 20: Gas temperature
sensor
TC 23
Tractors and machinery for agriculture and forestry
ISO/CD 9912-2
Agricultural irrigation equipment — Filters — Part 2: Strainer-type filters
ISO/CD 9912-3
Agricultural irrigation equipment — Filters — Part 3: Automatic self-cleaning strainer-type filters
ISO/CD 15639-1
Standardization of injection sites for different animal species — Part 1: Companion animals (cats and
dogs)
ISO/WD 24631-5
Radio frequency identification of animals — RFID transceivers — Part 5: Procedure for testing the
capability of reading ISO 11784 and ISO 11785 transponders
TC 24
Particle characterization including sieving
ISO/CD 13317-4
Determination of particle size distribution by gravitational liquid sedimentation methods — Part 4:
Balance method
TC 28
Petroleum products and lubricants
ISO/CD 12924
Lubricants, industrial oils and related products (Class L) — Family X (Greases) — Specification
ISO/CD 16861
Di-methyl ether (DME) for fuels — Specifications
TC 34
Food products
ISO/CD 17718
Cereals and cereal products — Wheat whole meal and flour (T. aestivum) — Determination of
rheological behaviour as a function of mixing and temperature increase
ISO/CD 12228-1
Determination of individual and total sterols contents — Gas chromatographic method — Part 1:
Animal and vegetable fats and oils
ISO/CD 12228-2
Determination of individual and total sterols contents — Gas chromatographic method — Part 2: Olive
and olive pomace oils
TC 35
Paints and varnishes
ISO/CD 2813
Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20 degrees, 60
degrees and 85 degrees
ISO/CD 13803
Paints and varnishes — Determination of reflection haze on paint films at 20 degrees
TC 42
Photography
ISO/NP 18947
Imaging materials — Printed imaging materials — Determination of abrasion, scuff, and smudge
resistance of printed colour images
ISO/CD TS 22028-3
Photography and graphic technology — Extended colour encodings for digital image storage,
manipulation and interchange — Part 3: Reference input medium metric RGB colour image encoding
(RIMM RGB)
TC 43
Acoustics
ISO/NP 12999-1
Determination and application of measurement uncertainties in building acoustics — Part 1: Sound
insulation
TC 44
Welding and allied processes
ISO/NP 17533
Welding for aerospace applications — Welding data in design documents
TC 59
Buildings and civil engineering works
ISO/CD 11617
Building construction — Jointing products — Test method to assess the durability of construction
sealants
ISO/CD TS 12911
Framework for building information modelling (BIM) guidance
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
ISO/NP TS 16339
Petroleum and natural gas industry - Well control equipments for HPHT (High Pressure High
Temperature) drilling operations
ISO/CD 24817
Petroleum, petrochemical and natural gas industries — Composite repairs for pipework —
Qualification and design, installation, testing and inspection
TC 70
Internal combustion engines
ISO/CD 15619
Measurement procedure for exhaust silencers of internal combustion engines
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 12749-2
Nuclear energy — Vocabulary — Part 2: Radiological protection
ISO/NP 21613
(U, Pu)O2 powders and sintered pellets — Determination of chlorine and fluorine
TC 94
Personal safety -- Protective clothing and equipment
ISO/CD 16321
Occupational eye and face protection - requirements
TC 106
Dentistry
ISO/CD 16635-1
Dentistry — Rubber dam technique — Part 1: Rubber dam punch
ISO/CD 16635-2
Dentistry — Rubber dam technique — Part 2: Rubber dam clamp forceps
TC 108
Mechanical vibration, shock and condition monitoring
ISO/CD 18431-3
Mechanical vibration and shock — Signal processing — Part 3: Methods of time-frequency and timescale analysis
TC 127
Earth-moving machinery
ISO/NP TS 15998-2
Earth-moving machinery — Machine control systems (MCS) using electronic components — Part 2:
Guidelines for the use and application of ISO 15998
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO/NP 4437-1
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General
ISO/NP 4437-2
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes
ISO/NP 4437-3
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 3: Fittings
ISO/NP 4437-5
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 5: Fitness for
purpose
ISO/NP 17885
Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications
TC 146
Air quality
ISO/NP 17734-1
Determination of organonitrogen compounds in air using liquid chromatography and mass
spectrometry — Part 1: Isocyanates using dibutylamine derivatives
ISO/NP 17734-2
Determination of organonitrogen compounds in air using liquid chromatography and mass
spectrometry — Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate
derivatives
TC 147
Water quality
ISO/CD 17289
Water quality — Determination of dissolved oxygen — Optical sensor method
TC 172
Optics and photonics
ISO/CD 8600-1
Endoscopes — Medical endoscopes and endotherapy devices — Part 1: General requirements
ISO/NP 12858-1
Optics and optical instruments — Ancillary devices for geodetic instruments — Part 1: Invar levelling
staffs
TC 204
Intelligent transport systems
ISO/DTR 14806
Intelligent transport systems — Public transport requirements for the use of payment applications for
fare media
TC 215
Health informatics
ISO/CD 13940
Health informatics — System of concepts to support continuity of care
ISO/HL7 NP 13972-1
Health Informatics — Detailed Clinical Models — Part 1: Quality processes regarding detailed clinical
model development, governance, publishing and maintenance
ISO/HL7 NP 13972-2
Health Informatics — Detailed Clinical Models — Part 2: Quality attributes of detailed clinical models
ISO/DTR 16278
Health Informatics - Identification of the status of structures for representation of human anatomy
within healthcare terminological systems
TC 251
Project committee: Asset management
ISO/CD 55001
Asset management — Requirements
CASCO
Committee on conformity assessment
ISO/IEC WD 17067
Conformity assessment — Fundamentals of product certification
JTC 1
Information technology
ISO/IEC CD 27000
Information technology — Security techniques — Information security management systems —
Overview and vocabulary
ISO/IEC CD 27002
Information technology — Security techniques — Code of practice for information security controls
DIS circulated
Period from 01 November to 30 November 2011
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 6
Paper, board and pulps
ISO/DIS 11093-8
Paper and board — Testing of cores — Part 8: Determination of natural frequency and
flexural modulus by experimental modal analysis
2012-04-23
(Revision of ISO 11093-8:1997)
ISO/DIS 8784-1
* Pulp, paper and board — Microbiological examination — Part 1: Enumeration of
bacteria and bacterial spores based on disintegration
2012-04-03
(Revision of ISO 8784-1:2005)
TC 8
Ships and marine technology
ISO/DIS 16855
* Ships and Marine Technology — Loose gear of lifting appliances on ships — General
requirements
2012-04-16
ISO/DIS 16856
* Ships and Marine Technology — Loose gear of lifting appliances on ships — Hooks
2012-04-16
ISO/DIS 16857
* Ships and Marine Technology — Loose gear of lifting appliances on ships — Shackles
2012-04-16
ISO/DIS 16858
* Ships and Marine Technology — Loose gear of lifting appliances on ships — Pulleys
2012-04-16
TC 20
Aircraft and space vehicles
ISO/DIS 17807
* Space data and information transfer systems - Asynchronous message service
2012-04-30
ISO/DIS 17808
* Space data and information transfer systems — Telemetry (TM) channel coding
profiles
2012-04-30
ISO/DIS 17809
* Space data and information transfer systems - Delta-differential one-way ranging
(Delta-DOR) operations
2012-04-30
ISO/DIS 17810
* Space data and information transfer systems — Data transmission and pseudo-random
noise (PN) ranging for 2 GHz code division multiple access (CDMA) link via data relay
satellite
2012-04-30
ISO/DIS 22641
* Space data and information transfer systems — TM (telemetry) synchronization and
channel coding
2012-04-09
(Revision of ISO 22641:2005)
TC 21
Equipment for fire protection and fire fighting
ISO 724024:2010/DAmd 1
Fire detection and fire alarm systems — Part 24: Sound-system loudspeakers —
Amendment 1
ISO/DIS 6182-1
* Fire protection — Automatic sprinkler systems — Part 1: Requirements and test
methods for sprinklers
2012-04-16
2012-04-24
(Revision of ISO 6182-1:2004)
TC 22
ISO/DIS 20653
Road vehicles
* Road vehicles — Degrees of protection (IP-Code) — Protection of electrical equipment
against foreign objects, water and access
2012-04-05
(Revision of ISO 20653:2006)
TC 23
Tractors and machinery for agriculture and forestry
ISO 7914:2002/DAmd
1
* Forestry machinery — Portable chain-saws — Minimum handle clearance and sizes —
Amendment 1
2012-05-01
ISO/DIS 24631-7
* Radiofrequency identification of animals — Part 7: Synchronization of ISO 11785
identification systems
2012-04-15
TC 28
ISO/DIS 9038
Petroleum products and lubricants
* Determination of sustained combustibility of liquids
2012-04-18
(Revision of ISO 9038:2002)
TC 29
ISO/DIS 525
Small tools
* Bonded abrasive products — General requirements
2012-04-12
(Revision of ISO 525:1999)
TC 34
ISO 21571:2005/DAmd
1
TC 44
ISO/DIS 12996
Food products
* Foodstuffs — Methods of analysis for the detection of genetically modified organisms
and derived products — Nucleic acid extraction — Amendment 1
Welding and allied processes
* Mechanical joining — Destructive testing of joints — Specimen dimensions and test
procedure for tensile shear testing of single joints
TC 67
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries
ISO/DIS 12736
Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines,
flow lines, equipment and subsea structures
TC 69
Applications of statistical methods
ISO/DIS 3534-3.2
2012-04-18
* Statistics — Vocabulary and symbols — Part 3: Design of experiments
2012-04-04
2012-04-18
2012-01-03
(Revision of ISO 3534-3:1999)
ISO/DIS 7870-2
* Control charts — Part 2: Shewhart control charts
2012-04-12
(Revision of ISO 8258:1991)
TC 71
Concrete, reinforced concrete and pre-stressed concrete
ISO/DIS 16311-2
Maintenance and repair of concrete structures — Part 2: Assessment of existing
concrete structures
TC 76
Transfusion, infusion and injection, and blood processing equipment
2012-04-24
for medical and pharmaceutical use
ISO 853612:2007/DAmd 1
TC 92
ISO/DIS 29904
TC 106
ISO/DIS 6873
* Infusion equipment for medical use — Part 12: Check valves — Amendment 1
2012-04-29
Fire safety
* Fire chemistry — Generation and measurement of aerosols
2012-04-23
Dentistry
* Dentistry — Gypsum products
2012-04-18
(Revision of ISO 6873:1998)
ISO 133972:2005/DAmd 1
* Dentistry — Periodontal curettes, dental scalers and excavators — Part 2: Periodontal
curettes of Gr-type — Amendment 1: Colour coding
TC 108
Mechanical vibration, shock and condition monitoring
ISO/DIS 10819
Mechanical vibration and shock — Hand-arm vibration — Method for the measurement
and evaluation of the vibration transmissibility of gloves at the palm of the hand
2012-04-25
2012-04-11
(Revision of ISO 10819:1996)
TC 113
ISO/DIS 1100-1
Hydrometry
* Hydrometry — Measurement of liquid flow in open channels — Part 1: Guidelines for
selection, establishment and operation of a gauging station
2012-04-04
(Revision of ISO 1100-1:1996, ISO/TR 8363:1997)
TC 118
ISO/DIS 11011
TC 122
ISO/DIS 17351
TC 126
ISO/DIS 3308
Compressors and pneumatic tools, machines and equipment
* Compressed air — Energy efficiency — Assessment
2012-04-08
Packaging
* Packaging — Braille on packaging for medicinal products
2012-04-30
Tobacco and tobacco products
* Routine analytical cigarette-smoking machine — Definitions and standard conditions
2012-04-11
(Revision of ISO 3308:2000, ISO 3308:2000/Amd 1:2009)
TC 127
Earth-moving machinery
ISO/DIS 7133
Earth-moving machinery — Tractor-scrapers — Terminology and commercial
specifications
2012-04-05
(Revision of ISO 7133:1994)
ISO/DIS 7134
Earth-moving machinery — Graders — Terminology and commercial specifications
2012-04-05
(Revision of ISO 7134:1993, ISO 7134:1993/Cor 1:1996)
TC 147
ISO/DIS 15923-1
TC 150
ISO/DIS 5838-1
Water quality
* Water quality — Determination of ions by a discrete analysis system and
spectrophotometric detection — Part 1: Ammonium, chloride, nitrate, nitrite,
orthophosphate, silicate and sulfate
Implants for surgery
* Implants for surgery — Metallic skeletal pins and wires — Part 1: General requirements
(Revision of ISO 5838-1:1995)
TC 164
2012-04-04
Mechanical testing of metals
2012-04-22
ISO/DIS 18265
* Metallic materials — Conversion of hardness values
2012-04-04
(Revision of ISO 18265:2003)
TC 172
Optics and photonics
ISO/DIS 17123-5
Optics and optical instruments — Field procedures for testing geodetic and surveying
instruments — Part 5: Total stations
2012-04-29
(Revision of ISO 17123-5:2005)
TC 189
ISO/DIS 10545-9
Ceramic tile
* Ceramic tiles — Part 9: Determination of resistance to thermal shock
2012-04-25
(Revision of ISO 10545-9:2004)
TC 199
ISO/DIS 13856-2
Safety of machinery
* Safety of machinery — Pressure-sensitive protective devices — Part 2: General
principles for the design and testing of pressure-sensitive edges and pressure-sensitive
bars
2012-04-11
(Revision of ISO 13856-2:2005)
TC 204
ISO/DIS 15638-1
TC 206
ISO/DIS 14610
TC 215
ISO/DIS 27789.2
Intelligent transport systems
* Intelligent transport systems — Framework for collaborative Telematics Applications for
Regulated commercial freight Vehicles (TARV) — Part 1: Framework and architecture
2012-04-12
Fine ceramics
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for
flexural strength of porous ceramics at room temperature
2012-04-04
Health informatics
* Health informatics — Audit trails for electronic health records
2012-01-04
JTC 1
Information technology
ISO/IEC DIS 40500
Information technology — W3C Web Content Accessibility Guidelines (WCAG) 2.0
2012-04-16
ISO/IEC DIS 7812-1
Identification cards — Identification of issuers — Part 1: Numbering system
2012-04-18
(Revision of ISO/IEC 7812-1:2006)
ISO/IEC DIS 7812-2
Identification cards — Identification of issuers — Part 2: Application and registration
procedures
2012-04-18
(Revision of ISO/IEC 7812-2:2007)
ISO/IEC DIS 7816-4
Identification cards — Integrated circuit cards — Part 4: Organization, security and
commands for interchange
2012-05-01
(Revision of ISO/IEC 7816-4:2005, ISO/IEC 7816-4:2005/Amd 1:2008)
ISO/IEC DIS 1001
Information technology — File structure and labelling of magnetic tapes for information
interchange
2012-04-22
(Revision of ISO 1001:1986)
ISO/IEC DIS 27013
Information technology — Security techniques — Guidelines on the integrated
implementation of ISO/IEC 27001 and ISO/IEC 20000-1
2012-04-16
ISO/IEC DIS 27014
Information technology — Security techniques — Governance of information security
2012-04-12
ISO/IEC DIS 29115
Information technology — Security techniques — Entity authentication assurance
framework
2012-04-24
FDIS circulated
Period from 01 November to 30 November 2011
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 4
ISO 355:2007/FDAmd 1
Rolling bearings
*
TC 21
ISO/FDIS 21927-9
2012-01-17
Equipment for fire protection and fire fighting
*
TC 23
ISO/FDIS 11783-2
Rolling bearings — Tapered roller bearings — Boundary dimensions and series
designations — Amendment 1
Smoke and heat control systems — Part 9: Specification for control equipment
2012-01-31
Tractors and machinery for agriculture and forestry
*
Tractors and machinery for agriculture and forestry — Serial control and
communications data network — Part 2: Physical layer
2012-01-17
(Revision of ISO 11783-2:2002, ISO 11783-2:2002/Cor 1:2003, ISO 117832:2002/Amd 1:2006)
ISO/FDIS 11783-9
*
Tractors and machinery for agriculture and forestry — Serial control and
communications data network — Part 9: Tractor ECU
2012-01-16
(Revision of ISO 11783-9:2002)
TC 29
ISO/FDIS 6987
Small tools
*
Indexable hard material inserts with rounded corners, with partly cylindrical fixing
hole — Dimensions
2012-01-16
(Revision of ISO 6987:1998)
TC 31
ISO/FDIS 9413
Tyres, rims and valves
*
Tyre valves — Dimensions and designation
2012-01-22
(Revision of ISO 9413:1998, ISO 9413:1998/Amd 1:2001, ISO 9413:1998/Amd
2:2004)
TC 34
ISO/FDIS 11746
Food products
*
TC 35
ISO/FDIS 8503-1
Rice — Determination of biometric characteristics of kernels
2012-01-04
Paints and varnishes
*
Preparation of steel substrates before application of paints and related products
— Surface roughness characteristics of blast-cleaned steel substrates — Part 1:
Specifications and definitions for ISO surface profile comparators for the
assessment of abrasive blast-cleaned surfaces
2012-01-25
(Revision of ISO 8503-1:1988)
ISO/FDIS 8503-2
*
Preparation of steel substrates before application of paints and related products
— Surface roughness characteristics of blast-cleaned steel substrates — Part 2:
Method for the grading of surface profile of abrasive blast-cleaned steel —
Comparator procedure
2012-01-25
(Revision of ISO 8503-2:1988)
ISO/FDIS 8503-3
*
Preparation of steel substrates before application of paints and related products
— Surface roughness characteristics of blast-cleaned steel substrates — Part 3:
Method for the calibration of ISO surface profile comparators and for the
determination of surface profile — Focusing microscope procedure
2012-01-25
(Revision of ISO 8503-3:1988)
ISO/FDIS 8503-4
*
Preparation of steel substrates before application of paints and related products
— Surface roughness characteristics of blast-cleaned steel substrates — Part 4:
Method for the calibration of ISO surface profile comparators and for the
determination of surface profile — Stylus instrument procedure
2012-01-25
(Revision of ISO 8503-4:1988)
TC 58
ISO/FDIS 11114-1
Gas cylinders
*
Gas cylinders — Compatibility of cylinder and valve materials with gas contents
— Part 1: Metallic materials
2012-01-18
(Revision of ISO 11114-1:1997)
TC 61
ISO/FDIS 527-1
Plastics
*
Plastics — Determination of tensile properties — Part 1: General principles
2012-01-25
(Revision of ISO 527-1:1993, ISO 527-1:1993/Cor 1:1994, ISO 527-1:1993/Amd
1:2005)
ISO/FDIS 527-2
*
Plastics — Determination of tensile properties — Part 2: Test conditions for
moulding and extrusion plastics
2012-01-25
(Revision of ISO 527-2:1993, ISO 527-2:1993/Cor 1:1994)
ISO/FDIS 1622-1
*
Plastics — Polystyrene (PS) moulding and extrusion materials — Part 1:
Designation system and basis for specifications
2012-01-25
(Revision of ISO 1622-1:1994)
TC 68
ISO/FDIS 11568-2
Financial services
*
Financial services — Key management (retail) — Part 2: Symmetric ciphers, their
key management and life cycle
2012-01-12
(Revision of ISO 11568-2:2005)
TC 76
ISO/FDIS 1135-4
Transfusion, infusion and injection, and blood processing
equipment for medical and pharmaceutical use
*
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
2012-02-04
(Revision of ISO 1135-4:2010)
TC 86
Refrigeration and air-conditioning
ISO 239531:2005/FDAmd 1
*
Refrigerated display cabinets — Part 1: Vocabulary — Amendment 1
2012-01-18
ISO 239532:2005/FDAmd 1
*
Refrigerated display cabinets — Part 2: Classification, requirements and test
conditions — Amendment 1
2012-01-18
TC 96
Cranes
ISO/FDIS 11660-4
*
Cranes — Access, guards and restraints — Part 4: Jib cranes
TC 106
Dentistry
IEC/FDIS 80601-2-60
Medical electrical equipment — Part 2-60: Particular requirements for basic safety
and essential performance of dental equipment
TC 108
Mechanical vibration, shock and condition monitoring
2012-01-12
2012-01-26
ISO/FDIS 18312-2
*
Mechanical vibration and shock — Measurement of vibration power flow from
machines into connected support structures — Part 2: Indirect method
2012-01-04
ISO/FDIS 13374-3
*
Condition monitoring and diagnostics of machines — Data processing,
communication and presentation — Part 3: Communication
2012-01-31
TC 110
ISO/FDIS 22915-13
Industrial trucks
*
Industrial trucks — Verification of stability — Part 13: Rough-terrain trucks with
mast
2012-01-31
(Revision of ISO 8379:1998, ISO 8379:1998/Amd 1:2001)
TC 123
ISO/FDIS 14287
Plain bearings
*
TC 131
ISO/FDIS 16431
Plain bearings — Pad materials for tilting pad bearings
2012-01-18
Fluid power systems
*
Hydraulic fluid power — System clean-up procedures and verification of
cleanliness of assembled systems
2012-01-04
(Revision of ISO/TS 16431:2002)
TC 146
ISO/FDIS 15202-2
Air quality
*
Workplace air — Determination of metals and metalloids in airborne particulate
matter by inductively coupled plasma atomic emission spectrometry — Part 2:
Sample preparation
2012-01-11
(Revision of ISO 15202-2:2001)
ISO/FDIS 28902-1
*
TC 147
ISO/FDIS 8692
Air quality — Environmental meteorology — Part 1: Ground-based remote
sensing of visual range by lidar
2012-01-03
Water quality
*
Water quality — Freshwater algal growth inhibition test with unicellular green
algae
2012-01-25
(Revision of ISO 8692:2004)
TC 156
ISO/FDIS 12696
Corrosion of metals and alloys
*
Cathodic protection of steel in concrete
2012-01-18
(Revision of ISO/DIS 12696)
TC 157
ISO 8009:2004/FDAmd 1
Non-systemic contraceptives and STI barrier prophylactics
*
TC 171
ISO/FDIS 14641-1
2012-01-31
Document management applications
*
TC 172
ISO 11979-
Mechanical contraceptives — Reusable natural and silicone rubber contraceptive
diaphragms — Requirements and tests — Amendment 1
Electronic archiving — Part 1: Specifications concerning the design and the
operation of an information system for electronic information preservation
2012-01-15
Optics and photonics
*
Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations —
2012-01-04
7:2006/FDAmd 1
Amendment 1
TC 173
Assistive products for persons with disability
ISO/FDIS 23599
*
TC 184
ISO/FDIS 8373
Assistive products for blind and vision-impaired persons — Tactile walking
surface indicators
2012-01-26
Automation systems and integration
*
Robots and robotic devices — Vocabulary
2012-01-31
(Revision of ISO 8373:1994, ISO 8373:1994/Amd 1:1996, ISO 8373:1994/Cor
1:1996)
TC 190
ISO/FDIS 12914
Soil quality
*
TC 201
ISO/FDIS 11039
2012-01-22
Surface chemical analysis
*
TC 218
ISO/FDIS 3129
Soil quality — Microwave-assisted extraction of the aqua regia soluble fraction for
the determination of elements
Surface chemical analysis — Scanning-probe microscopy — Measurement of
drift rate
2012-01-17
Timber
*
Wood — Sampling methods and general requirements for physical and
mechanical testing of small clear wood specimens
2012-01-09
(Revision of ISO 3129:1975)
TC 219
ISO/FDIS 10361
Floor coverings
*
Textile floor coverings — Production of changes in appearance by means of
Vettermann drum and hexapod tumbler tester
2012-01-31
(Revision of ISO 10361:2000)
IULTCS
ISO/FDIS 14088
International Union of Leather Technologists and Chemists
Societies
*
CASCO
ISO/IEC FDIS 17020
Leather — Chemical tests — Quantitative analysis of tanning agents by filter
method
2012-01-04
Committee on conformity assessment
*
Conformity assessment — Requirements for the operation of various types of
bodies performing inspection
2012-01-18
(Revision of ISO/IEC 17020:1998)
JTC 1
ISO/IEC FDIS 15504-5
Information technology
*
Information technology — Process assessment — Part 5: An exemplar software
life cycle process assessment model
2012-01-11
(Revision of ISO/IEC 15504-5:2006, ISO/IEC 15504-5:2006/DAM 1)
ISO/IEC 103736:2011/FDAmd 1
*
Identification cards — Test methods — Part 6: Proximity cards — Amendment 1:
Additional PICC classes
2012-01-09
(Revision of ISO/IEC 10373-6:2001/DAM 1)
ISO/IEC 180133:2009/FDAmd 1
*
Information technology — Personal identification — ISO-compliant driving licence
— Part 3: Access control, authentication and integrity validation — Amendment 1:
Scanning area identifier — Optional machine readable zone
2012-01-23
ISO/IEC FDIS 10967-1
*
Information technology — Language independent arithmetic — Part 1: Integer
and floating point arithmetic
2012-01-30
(Revision of ISO/IEC 10967-1:1994)
ISO/IEC FDIS 23271
*
Information technology — Common Language Infrastructure (CLI)
2012-01-29
(Revision of ISO/IEC 23271:2006)
ISO/IEC FDIS 14543-5-3
*
Information technology — Home electronic system (HES) architecture — Part 53: Intelligent grouping and resource sharing for HES Class 2 and Class 3 — Basic
application
2012-01-05
ISO/IEC FDIS 14543-5-5
*
Information technology — Home electronic system (HES) architecture — Part 55: Intelligent grouping and resource sharing for HES Class 2 and Class 3 —
Device type
2012-01-05
ISO/IEC FDIS 14543-5-6
*
Information technology — Home electronic system (HES) architecture —
Intelligent grouping and resource sharing for HES Class 2 and Class 3 — Part 56: Service type
2012-01-05
ISO/IEC FDIS 14543-521
*
Information technology — Home electronic system (HES) architecture — Part 521: Intelligent grouping and resource sharing for HES Class 2 and Class 3 —
Application profile — AV profile
2012-01-05
ISO/IEC FDIS 14763-2
*
Information technology — Implementation and operation of customer premises
cabling — Part 2: Planning and installation
2012-01-08
(Revision of ISO/IEC TR 14763-2:2000)
ISO/IEC FDIS 23001-7
*
Information technology — MPEG systems technologies — Part 7: Common
encryption in ISO base media file format files
2012-01-02
ISO/IEC FDIS 23003-3
*
Information technology — MPEG audio technologies — Part 3: Unified speech
and audio coding
2012-01-24
ISO/IEC FDIS 15961-1
*
Information technology — Radio frequency identification (RFID) for item
management: Data protocol — Part 1: Application interface
2012-01-24
(Revision of ISO/IEC 15961:2004)
ISO/IEC FDIS 15962
*
Information technology — Radio frequency identification (RFID) for item
management — Data protocol: data encoding rules and logical memory functions
2012-01-22
(Revision of ISO/IEC 15962:2004)
ISO/IEC FDIS 18047-2
*
Information technology — Radio frequency identification device conformance test
methods — Part 2: Test methods for air interface communications below 135 kHz
2012-01-09
(Revision of ISO/IEC TR 18047-2:2006)
ISO/IEC/IEEE FDIS
21451-7
*
Information technology — Smart transducer interface for sensors and actuators
— Part 7: Transducer to radio frequency identification (RFID) systems
communication protocols and Transducer Electronic Data Sheet (TEDS) formats
2012-01-09
ISO/IEC FDIS 15944-8
*
Information technology — Business Operational View — Part 8: Identification of
privacy protection requirements as external constraints on business transactions
2012-01-11
ISO/IEC
26300:2006/FDAmd 1
*
Information technology — Open Document Format for Office Applications
(OpenDocument) v1.0 — Amendment 1: Open Document Format for Office
Applications (OpenDocument) v1.1
2012-01-25
ISO/IEC FDIS 19785-2
*
Information technology — Common Biometric Exchange Formats Framework —
Part 2: Procedures for the operation of the Biometric Registration Authority
2012-01-25
(Revision of ISO/IEC 19785-2:2006, ISO/IEC 19785-2:2006/Amd 1:2010)
ISO/IEC FDIS 19795-6
*
Information technology — Biometric performance testing and reporting — Part 6:
Testing methodologies for operational evaluation
2012-01-09
ISO/IEC FDIS 16680
*
Information technology — The Open Group Service Integration Maturity Model
(OSIMM)
2012-01-09
Standards published
New International Standards published between 01 November and 30 November 2011
* Available in English only
** French version of standard previously published in English only
Price group
TC 4
Rolling bearings
ISO/TS 23768-1:2011
Rolling bearings — Parts library — Part 1: Reference dictionary for rolling bearings
TC 6
Paper, board and pulps
ISO 12830:2011
Paper, board and pulps — Determination of acid-soluble magnesium, calcium,
manganese, iron, copper, sodium and potassium
F
ISO 534:2011
Paper and board — Determination of thickness, density and specific volume
G
ISO 2493-2:2011
Paper and board — Determination of bending resistance — Part 2: Taber-type tester
E
TC 8
Ships and marine technology
ISO 13613:2011
*
TC 10
ISO 9177-1:2011
Ships and marine technology — Maintenance and testing to reduce losses in critical
systems for propulsion
V
G
Technical product documentation
*
TC 17
Mechanical pencils — Part 1: Classification, dimensions, performance requirements
and testing
D
Steel
ISO 9364:2011
*
Continuous hot-dip 55 % aluminium/zinc alloy-coated steel sheet of commercial,
drawing and structural qualities
H
ISO 13887:2011
*
Cold-reduced steel sheet of higher yield strength with improved formability
D
TC 20
Aircraft and space vehicles
ISO 17107:2011
*
Space data and information transfer systems — XML specification for navigation data
messages
ISO 22671:2011
*
Space data and information transfer systems — Space link extension (SLE) —
Forward communications link transmission unit (CLTU) service
XB
ISO 22672:2011
*
Space data and information transfer systems — Space link extension (SLE) —
Forward space packet service specification
XD
V
ISO 10784-1:2011
*
Space systems — Early operations — Part 1: Spacecraft initialization and
commissioning
D
ISO 10784-2:2011
*
Space systems — Early operations — Part 2: Initialization plan
F
ISO 10784-3:2011
*
Space systems — Early operations — Part 3: Commissioning report
D
TC 21
ISO 15779:2011
Equipment for fire protection and fire fighting
*
TC 22
Condensed aerosol fire extinguishing systems — Requirements and test methods for
components and system design, installation and maintenance — General
requirements
W
Road vehicles
ISO 15765-2:2011
*
Road vehicles — Diagnostic communication over Controller Area Network (DoCAN)
— Part 2: Transport protocol and network layer services
R
ISO 26262-1:2011
*
Road vehicles — Functional safety — Part 1: Vocabulary
L
ISO 26262-2:2011
*
Road vehicles — Functional safety — Part 2: Management of functional safety
M
ISO 26262-3:2011
*
Road vehicles — Functional safety — Part 3: Concept phase
M
ISO 26262-4:2011
*
Road vehicles — Functional safety — Part 4: Product development at the system
level
R
ISO 26262-5:2011
*
Road vehicles — Functional safety — Part 5: Product development at the hardware
level
W
ISO 26262-6:2011
*
Road vehicles — Functional safety — Part 6: Product development at the software
level
R
ISO 26262-7:2011
*
Road vehicles — Functional safety — Part 7: Production and operation
F
ISO 26262-8:2011
*
Road vehicles — Functional safety — Part 8: Supporting processes
T
ISO 26262-9:2011
*
Road vehicles — Functional safety — Part 9: Automotive Safety Integrity Level
(ASIL)-oriented and safety-oriented analyses
H
ISO 8535-1:2011
*
Diesel engines — Steel tubes for high-pressure fuel injection pipes — Part 1:
Requirements for seamless cold-drawn single-wall tubes
E
TC 23
Tractors and machinery for agriculture and forestry
ISO 8082-2:2011
Self-propelled machinery for forestry — Laboratory tests and performance
requirements for roll-over protective structures — Part 2: Machines having a rotating
platform with a cab and boom on the platform
K
ISO 11850:2011
Machinery for forestry — General safety requirements
J
ISO 11680-1:2011
Machinery for forestry — Safety requirements and testing for pole-mounted powered
pruners — Part 1: Machines fitted with an integral combustion engine
J
ISO 11680-2:2011
Machinery for forestry — Safety requirements and testing for pole-mounted powered
pruners — Part 2: Machines for use with back-pack power source
C
ISO 11681-1:2011
Machinery for forestry — Portable chain-saw safety requirements and testing — Part
1: Chain-saws for forest service
L
ISO 11681-2:2011
Machinery for forestry — Portable chain-saw safety requirements and testing — Part
2: Chain-saws for tree service
M
ISO 11806-1:2011
Agricultural and forestry machinery — Safety requirements and testing for portable,
hand-held, powered brush-cutters and grass-trimmers — Part 1: Machines fitted with
an integral combustion engine
N
ISO 11806-2:2011
Agricultural and forestry machinery — Safety requirements and testing for portable,
hand-held, powered brush-cutters and grass-trimmers — Part 2: Machines for use
C
with back-pack power unit
Portable hand-held forestry machines — A-weighted emission sound pressure levels
at the operator's station — Comparative data in 2002
E
Agricultural equipment — Graphical symbols for pressurized irrigation systems
E
ISO 11783-4:2011
Tractors and machinery for agriculture and forestry — Serial control and
communications data network — Part 4: Network layer
P
TC 29
Small tools
ISO 10243:2010/Amd
1:2011
Tools for pressing — Compression springs with rectangular section — Housing
dimensions and colour coding — Amendment 1
TC 33
Refractories
ISO 14719:2011
Chemical analysis of refractory material glass and glazes — Determination of Fe2+
and Fe3+ by the spectral photometric method with 1,10-phenanthroline
TC 34
Food products
ISO 14470:2011
Food irradiation — Requirements for the development, validation and routine control
of the process of irradiation using ionizing radiation for the treatment of food
ISO 8968-3:2004/Cor 1
Milk — Determination of nitrogen content — Part 3: Block-digestion method (Semimicro rapid routine method) — Technical Corrigendum 1
free
ISO 8968-4:2001/Cor 1
Milk — Determination of nitrogen content — Part 4: Determination of non-proteinnitrogen content — Technical Corrigendum 1
free
ISO/TR 22520:2005
ISO 15081:2011
*
XZ
G
K
ISO 13082:2011
*
Milk and milk products — Determination of the lipase activity of pregastric lipase
preparation
E
ISO 4150:2011
*
Green coffee or raw coffee — Size analysis — Manual and machine sieving
F
TC 35
Paints and varnishes
ISO 2431:2011
Paints and varnishes — Determination of flow time by use of flow cups
TC 41
Pulleys and belts (including veebelts)
ISO 254:2011
Belt drives — Pulleys — Quality, finish and balance
TC 42
Photography
ISO 18941:2011
*
Imaging materials — Colour reflection prints — Test method for ozone gas fading
stability
H
B
L
TC 43
Acoustics
ISO 3741:2010
Acoustics — Determination of sound power levels and sound energy levels of noise
sources using sound pressure — Precision methods for reverberation test rooms
V
ISO 3746:2010
Acoustics — Determination of sound power levels and sound energy levels of noise
sources using sound pressure — Survey method using an enveloping measurement
surface over a reflecting plane
T
ISO 10844:2011
Acoustics — Specification of test tracks for measuring noise emitted by road vehicles
and their tyres
T
TC 44
Welding and allied processes
ISO 15609-5:2011
Specification and qualification of welding procedures for metallic materials — Welding
procedure specification — Part 5: Resistance welding
TC 45
Rubber and rubber products
G
ISO 10619-1:2011
Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness —
Part 1: Bending tests at ambient temperature
F
ISO 10619-2:2011
Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness —
Part 2: Bending tests at sub-ambient temperatures
E
ISO 10619-3:2011
Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness —
Part 3: Bending tests at high and low temperatures
B
ISO 28017:2011
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging
applications — Specification
H
ISO 132:2011
Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack
growth (De Mattia)
H
ISO 812:2011
Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
G
ISO 814:2011
Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Twoplate method
D
ISO 1407:2011
Rubber — Determination of solvent extract
J
ISO 1827:2011
Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion
to rigid plates — Quadruple-shear methods
E
ISO 3384-1:2011
Rubber, vulcanized or thermoplastic — Determination of stress relaxation in
compression — Part 1: Testing at constant temperature
G
ISO 4664-1:2011
Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part
1: General guidance
M
Rubber — Determination of metal content by atomic absorption spectrometry — Part
6: Determination of magnesium content
D
ISO 7267-3:2011
Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and
Jones method
D
ISO 7743:2011
Rubber, vulcanized or thermoplastic — Determination of compression stress-strain
properties
L
ISO 124:2011
Latex, rubber — Determination of total solids content
D
ISO 125:2011
Natural rubber latex concentrate — Determination of alkalinity
C
ISO/TS 16176:2011
Rubber compounding ingredients — Carbon black — Determination of the aggregatesize distribution at ultimate dispersion
E
ISO 6072:2011
Rubber — Compatibility between hydraulic fluids and standard elastomeric materials
K
TC 46
Information and documentation
ISO 30300:2011
Information and documentation — Management systems for records —
Fundamentals and vocabulary
H
ISO 30301:2011
Information and documentation — Management systems for records — Requirements
L
TC 59
Buildings and civil engineering works
ISO 6101-6:2011
*
ISO 15928-4:2011
*
Houses — Description of performance — Part 4: Fire safety
H
ISO 21929-1:2011
*
Sustainability in building construction — Sustainability indicators — Part 1:
Framework for the development of indicators and a core set of indicators for buildings
R
TC 61
Plastics
ISO 1043-1:2011
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their
special characteristics
H
ISO 1043-2:2011
Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials
B
ISO 179-2:1997/Amd
1:2011
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact
test — Amendment 1: Precision data
XZ
ISO 1133-1:2011
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate
(MVR) of thermoplastics — Part 1: Standard method
M
ISO 1133-2:2011
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate
(MVR) of thermoplastics — Part 2: Method for materials sensitive to time-temperature
history and/or moisture
H
ISO 23559:2011
*
Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
D
ISO 2559:2011
*
Textile glass — Mats (made from chopped or continuous strands) — Designation and
basis for specifications
D
ISO 3342:2011
*
Textile glass — Mats — Determination of tensile breaking force
C
ISO 4604:2011
*
Reinforcement fabrics — Determination of conventional flexural stiffness — Fixedangle flexometer method
B
ISO 4900:2011
*
Textile glass — Mats and fabrics — Determination of contact mouldability
B
TC 67
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries
ISO 21809-3:2008/Amd *
1:2011
Petroleum and natural gas industries — External coatings for buried or submerged
pipelines used in pipeline transportation systems — Part 3: Field joint coatings —
Amendment 1
ISO 10426-1:2009/Cor
1:2010
Petroleum and natural gas industries — Cements and materials for well cementing —
Part 1: Specification — Technical Corrigendum 1
ISO 13628-1:2005/Amd
1:2010
Petroleum and natural gas industries — Design and operation of subsea production
systems — Part 1: General requirements and recommendations — Amendment 1:
Revised Clause 6
XZ
XB
ISO 13706:2011
*
Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers
ISO 19901-6:2009/Cor
1:2011
*
Petroleum and natural gas industries — Specific requirements for offshore structures
— Part 6: Marine operations — Technical Corrigendum 1
TC 69
Applications of statistical methods
ISO/TR 12888:2011
Selected illustrations of gauge repeatability and reproducibility studies
TC 79
Light metals and their alloys
ISO 8287:2011
*
Magnesium and magnesium alloys — Unalloyed magnesium — Chemical
composition
XZ
free
free
R
B
TC 91
Surface active agents
ISO 4317:2011
Surface-active agents and detergents — Determination of water content — Karl
Fischer methods
TC 92
Fire safety
ISO 12828-1:2011
Validation method for fire gas analysis — Part 1: Limits of detection and quantification
TC 94
Personal safety -- Protective clothing and equipment
ISO 20344:2011
Personal protective equipment — Test methods for footwear
W
ISO 16900-4:2011
Respiratory protective devices — Methods of test and test equipment — Part 4:
Determination of gas filter capacity and migration, desorption and carbon monoxide
dynamic testing
H
G
K
TC 96
ISO 7752-2:2011
Cranes
*
TC 104
ISO 18186:2011
Cranes — Control layout and characteristics — Part 2: Basic arrangement and
requirements for mobile cranes
E
Freight containers
*
TC 107
Freight containers — RFID cargo shipment tag system
E
Metallic and other inorganic coatings
ISO 12670:2011
*
Thermal spraying — Components with thermally sprayed coatings — Technical
supply conditions
C
ISO/TR 26946:2011
*
Standard method for porosity measurement of thermally sprayed coatings
K
TC 118
Compressors and pneumatic tools, machines and equipment
ISO 11148-1:2011
Hand-held non-electric power tools — Safety requirements — Part 1: Assembly
power tools for non-threaded mechanical fasteners
K
ISO 11148-2:2011
Hand-held non-electric power tools — Safety requirements — Part 2: Cutting-off and
crimping power tools
L
ISO 11148-5:2011
Hand-held non-electric power tools — Safety requirements — Part 5: Rotary
percussive drills
M
ISO 11148-8:2011
Hand-held non-electric power tools — Safety requirements — Part 8: Sanders and
polishers
M
ISO 11148-9:2011
Hand-held non-electric power tools — Safety requirements — Part 9: Die grinders
L
ISO 11148-10:2011
Hand-held non-electric power tools — Safety requirements — Part 10: Compression
power tools
L
ISO 11148-11:2011
Hand-held non-electric power tools — Safety requirements — Part 11: Nibblers and
shears
K
TC 119
Powder metallurgy
ISO 13947:2011
*
Metallic powders — Test method for the determination of non-metallic inclusions in
metal powders using a powder-forged specimen
C
ISO 14168:2011
*
Metallic powders, excluding hardmetals — Method for testing copper-base infiltrating
powders
B
TC 121
Anaesthetic and respiratory equipment
ISO 80601-2-61:2011
Medical electrical equipment — Part 2-61: Particular requirements for basic safety
and essential performance of pulse oximeter equipment
TC 131
Fluid power systems
ISO 16589-2:2011
*
Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 2:
Vocabulary
X
P
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 11296-3:2009
Plastics piping systems for renovation of underground non-pressure drainage and
sewerage networks — Part 3: Lining with close-fit pipes
K
ISO/TS 22391-7:2011
Plastics piping systems for hot and cold water installations — Polyethylene of raised
temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity
G
TC 146
Air quality
ISO/TR 14294:2011
Workplace atmospheres — Measurement of dermal exposure — Principles and
methods
S
ISO 1600018:2011/Cor 1:2011
Indoor air — Part 18: Detection and enumeration of moulds — Sampling by impaction
— Technical Corrigendum 1
TC 147
Water quality
ISO 14380:2011
*
Water quality — Determination of the acute toxicity to Thamnocephalus platyurus
(Crustacea, Anostraca)
TC 150
Implants for surgery
ISO 25539-3:2011
Cardiovascular implants — Endovascular devices — Part 3: Vena cava filters
TC 159
Ergonomics
ISO 9241-303:2011
Ergonomics of human-system interaction — Part 303: Requirements for electronic
visual displays
TC 160
Glass in building
ISO 28278-1:2011
*
Glass in building — Glass products for structural sealant glazing — Part 1: Supported
and unsupported monolithic and multiple glazing
free
L
X
S
V
TC 163
Thermal performance and energy use in the built environment
ISO 15927-5:2004/Amd
1:2011
Hygrothermal performance of buildings — Calculation and presentation of climatic
data — Part 5: Data for design heat load for space heating — Amendment 1
TC 172
Optics and photonics
ISO/TR 21254-4:2011
Lasers and laser-related equipment — Test methods for laser-induced damage
threshold — Part 4: Inspection, detection and measurement
TC 176
Quality management and quality assurance
ISO 19011:2011
Guidelines for auditing management systems
TC 182
Geotechnics
ISO 22476-2:2005/Amd *
1:2011
Geotechnical investigation and testing — Field testing — Part 2: Dynamic probing —
Amendment 1
XZ
ISO 22476-3:2005/Amd *
1:2011
Geotechnical investigation and testing — Field testing — Part 3: Standard penetration
test — Amendment 1
XZ
TC 190
Soil quality
ISO 11262:2011
Soil quality — Determination of total cyanide
H
ISO 23611-5:2011
Soil quality — Sampling of soil invertebrates — Part 5: Sampling and extraction of soil
macro-invertebrates
F
TC 197
Hydrogen technologies
ISO 22734-2:2011
*
TC 201
Hydrogen generators using water electrolysis process — Part 2: Residential
applications
XZ
K
S
S
Surface chemical analysis
ISO 16242:2011
*
Surface chemical analysis — Recording and reporting data in Auger electron
spectroscopy (AES)
E
ISO 16243:2011
*
Surface chemical analysis — Recording and reporting data in X-ray photoelectron
spectroscopy (XPS)
E
TC 202
Microbeam analysis
ISO 13067:2011
Microbeam analysis — Electron backscatter diffraction — Measurement of average
J
grain size
TC 211
ISO 19149:2011
Geographic information/Geomatics
*
Geographic information — Rights expression language for geographic information —
GeoREL
R
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
ISO 23640:2011
In vitro diagnostic medical devices — Evaluation of stability of in vitro diagnostic
reagents
TC 213
Dimensional and geometrical product specifications and verification
ISO 10579:2010/Cor
1:2011
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Nonrigid parts — Technical Corrigendum 1
ISO 14405-2:2011
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2:
Dimensions other than linear sizes
L
ISO 22432:2011
Geometrical product specifications (GPS) — Features utilized in specification and
verification
T
TC 215
Health informatics
D
free
ISO/HL7 27953-1:2011
*
Health informatics — Individual case safety reports (ICSRs) in pharmacovigilance —
Part 1: Framework for adverse event reporting
XM
ISO/HL7 27953-2:2011
*
Health informatics — Individual case safety reports (ICSRs) in pharmacovigilance —
Part 2: Human pharmaceutical reporting requirements for ICSR
XM
TC 219
Floor coverings
ISO 23999:2008
Resilient floor coverings — Determination of dimensional stability and curling after
exposure to heat
D
ISO 26985:2008
Resilient floor coverings — Identification of linoleum and determination of cement
content and ash residue
C
ISO 26987:2008
Resilient floor coverings — Determination of staining and resistance to chemicals
C
TC 223
Societal security
ISO 22320:2011
*
TC 228
Societal security — Emergency management — Requirements for incident response
L
Tourism and related services
ISO 13289:2011
*
Recreational diving services — Requirements for the conduct of snorkelling
excursions
E
ISO 13970:2011
*
Recreational diving services — Requirements for the training of recreational
snorkelling guides
D
TC 229
Nanotechnologies
ISO/TS 10868:2011
Nanotechnologies — Characterization of single-wall carbon nanotubes using
ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
K
ISO/TS 11308:2011
Nanotechnologies — Characterization of single-wall carbon nanotubes using
thermogravimetric analysis
L
ISO/TS 11888:2011
*
Nanotechnologies — Characterization of multiwall carbon nanotubes — Mesoscopic
shape factors
J
ISO/TS 12805:2011
*
Nanotechnologies — Materials specifications — Guidance on specifying nano-objects
L
ISO/TS 80004-4:2011
*
Nanotechnologies — Vocabulary — Part 4: Nanostructured materials
D
ISO/TS 80004-5:2011
*
Nanotechnologies — Vocabulary — Part 5: Nano/bio interface
TC 234
Fisheries and aquaculture
ISO 12875:2011
Traceability of finfish products — Specification on the information to be recorded in
captured finfish distribution chains
TMB
Technical Management Board
ISO/IEC Guide 983:2008/Suppl 2:2011
*
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in
measurement (GUM:1995) — Supplement 2: Extension to any number of output
quantities
C
N
W
IULTCS
International Union of Leather Technologists and Chemists Societies
ISO 14087:2011
Leather — Physical and mechanical tests — Determination of bending force
C
ISO 17235:2011
Leather — Physical and mechanical tests — Determination of softness
B
JTC 1
Information technology
ISO/IEC 95942:2008/Cor 1:2011
*
Information technology — Open Systems Interconnection — The Directory: Models —
Part 2: — Technical Corrigendum 1
free
ISO/IEC 95942:2005/Cor 3:2011
*
Information technology — Open Systems Interconnection — The Directory: Models —
Part 2: — Technical Corrigendum 3
free
ISO/IEC 95943:2008/Cor 1:2011
*
Information technology — Open Systems Interconnection — The Directory: Abstract
service definition — Part 3: — Technical Corrigendum 1
free
ISO/IEC 95943:2005/Cor 3:2011
*
Information technology — Open Systems Interconnection — The Directory: Abstract
service definition — Part 3: — Technical Corrigendum 3
free
ISO/IEC 95944:2008/Cor 1:2011
*
Information technology — Open Systems Interconnection — The Directory:
Procedures for distributed operation — Part 4: — Technical Corrigendum 1
free
ISO/IEC 95944:2005/Cor 2:2011
*
Information technology — Open Systems Interconnection — The Directory:
Procedures for distributed operation — Part 4: — Technical Corrigendum 2
free
ISO/IEC 95945:2008/Cor 1:2011
*
Information technology — Open Systems Interconnection — The Directory: Protocol
specifications — Part 5: — Technical Corrigendum 1
free
ISO/IEC 95945:2005/Cor 2:2011
*
Information technology — Open Systems Interconnection — The Directory: Protocol
specifications — Part 5: — Technical Corrigendum 2
free
ISO/IEC 95946:2008/Cor 1:2011
*
Information technology — Open Systems Interconnection — The Directory: Selected
attribute types — Part 6: — Technical Corrigendum 1
free
ISO/IEC 95946:2005/Cor 3:2011
*
Information technology — Open Systems Interconnection — The Directory: Selected
attribute types — Part 6: — Technical Corrigendum 3
free
ISO/IEC 95948:2008/Cor 1:2011
*
Information technology — Open Systems Interconnection — The Directory: Publickey and attribute certificate frameworks — Part 8: — Technical Corrigendum 1
free
ISO/IEC 95948:2005/Cor 3:2011
*
Information technology — Open Systems Interconnection — The Directory: Publickey and attribute certificate frameworks — Part 8: — Technical Corrigendum 3
free
ISO/IEC 95949:2005/Cor 1:2011
*
Information technology — Open Systems Interconnection — The Directory:
Replication — Part 9: — Technical Corrigendum 1
free
ISO/IEC 95949:2008/Cor 1:2011
*
Information technology — Open Systems Interconnection — The Directory:
Replication — Part 9: — Technical Corrigendum 1
free
ISO/IEC 15149:2011
*
Information technology — Telecommunications and information exchange between
systems — Magnetic field area network (MFAN)
S
ISO/IEC 16504:2011
*
Information technology — Telecommunications and information exchange between
systems — MAC and PHY for operation in TV white space
XC
ISO/IEC 16512-2:2011
*
Information technology — Relayed multicast protocol: Specification for simplex group
XA
applications — Part 2:
ISO/IEC 17417:2011
*
Information technology — Telecommunications and information exchange between
systems — Short Distance Visible Light Communication (SDVLC)
N
ISO/IEC/IEEE
15289:2011
*
Systems and software engineering — Content of life-cycle information products
(documentation)
X
ISO/IEC TS 1550410:2011
*
Information technology — Process assessment — Part 10: Safety extension
M
ISO/IEC 26511:2011
*
Systems and software engineering — Requirements for managers of user
documentation
S
ISO/IEC 26515:2011
*
Systems and software engineering — Developing user documentation in an agile
environment
N
ISO/IEC/IEEE
29148:2011
*
Systems and software engineering — Life cycle processes — Requirements
engineering
X
ISO/IEC 29155-1:2011
*
Systems and software engineering — Information technology project performance
benchmarking framework — Part 1: Concepts and definitions
G
ISO/IEC/IEEE
42010:2011
*
Systems and software engineering — Architecture description
R
ISO/IEC 180132:2008/Cor 1:2011
*
Information technology — Personal identification — ISO-compliant driving licence —
Part 2: Machine-readable technologies — Technical Corrigendum 1
free
ISO/IEC 180133:2009/Cor 1:2011
*
Information technology — Personal identification — ISO-compliant driving licence —
Part 3: Access control, authentication and integrity validation — Technical
Corrigendum 1
free
ISO/IEC 24789-2:2011
*
Identification cards — Card service life — Part 2: Methods of evaluation
L
ISO/IEC TR 14763-21:2011
*
Information technology — Implementation and operation of customer premises
cabling — Part 2-1: Planning and installation - Identifiers within administration
systems
M
ISO/IEC 9797-3:2011
*
Information technology — Security techniques — Message Authentication Codes
(MACs) — Part 3: Mechanisms using a universal hash-function
M
ISO/IEC 101182:2010/Cor 1:2011
*
Information technology — Security techniques — Hash-functions — Part 2: Hashfunctions using an n-bit block cipher — Technical Corrigendum 1
free
ISO/IEC 101183:2004/Cor 1:2011
*
Information technology — Security techniques — Hash-functions — Part 3: Dedicated
hash-functions — Technical Corrigendum 1
free
ISO/IEC 18031:2011
*
Information technology — Security techniques — Random bit generation
ISO/IEC 27006:2011
*
Information technology — Security techniques — Requirements for bodies providing
audit and certification of information security management systems
R
ISO/IEC 27007:2011
*
Information technology — Security techniques — Guidelines for information security
management systems auditing
N
ISO/IEC 27034-1:2011
*
Information technology — Security techniques — Application security — Part 1:
Overview and concepts
V
ISO/IEC 144965:2001/Amd 26:2011
*
Information technology — Coding of audio-visual objects — Part 5: Reference
software — Amendment 26: Reference software for scalable complexity 3D mesh
coding in 3DG compression model
XZ
ISO/IEC 144965:2001/Amd 30:2011
*
Information technology — Coding of audio-visual objects — Part 5: Reference
software — Amendment 30: ExtendedCore2D reference software
XZ
ISO/IEC 1449616:2011/Amd 1:2011
*
Information technology — Coding of audio-visual objects — Part 16: Animation
Framework eXtension (AFX) — Amendment 1: Efficient representation of 3D meshes
with multiple attributes
XZ
XB
ISO/IEC 1449627:2009/Amd 3:2011
*
Information technology — Coding of audio-visual objects — Part 27: 3D Graphics
conformance — Amendment 3: Scalable complexity 3D mesh coding conformance in
3DGCM
XZ
ISO/IEC 2300011:2009/Amd 2:2011
*
Information technology — Multimedia application format (MPEG-A) — Part 11:
Stereoscopic video application format — Amendment 2: Signalling of additional
composition type and profiles
XZ
ISO/IEC TR
29172:2011
*
Information technology — Mobile item identification and management — Reference
architecture for Mobile AIDC services
ISO/IEC 197578:2008/Cor 1:2011
*
Information technology — Document Schema Definition Languages (DSDL) — Part 8:
Document Semantics Renaming Language (DSRL) — Technical Corrigendum 1
free
ISO/IEC
26300:2006/Cor 2:2011
*
Information technology — Open Document Format for Office Applications
(OpenDocument) v1.0 — Technical Corrigendum 2
free
ISO/IEC TR 115811:2011
*
Information technology — User interface icons — Part 1: Introduction to and overview
of icon standards
E
ISO/IEC 12785-2:2011
*
Information technology — Learning, education, and training — Content packaging —
Part 2: XML binding
P
ISO/IEC TR 247251:2011
*
ITLET supportive technology and specification integration — Part 1: Framework
F
ISO/IEC 19794-5:2011
*
Information technology — Biometric data interchange formats — Part 5: Face image
data
ISO/IEC 17203:2011
*
Information technology — Open Virtualization Format (OVF) specification
Standards confirmed
The following International Standards are confimred for a five year period:
TC 22
Road vehicles
ISO 2699:1994
(reconfirmed)
ISO 4008-1:1980
(reconfirmed)
ISO 4008-2:1983
(reconfirmed)
ISO 7030:1987
(reconfirmed)
ISO 7576:1990
(reconfirmed)
ISO 7750-1:1992
(reconfirmed)
ISO 8356:1984
(reconfirmed)
ISO 9103:1987
(reconfirmed)
ISO 11841-1:2000
(reconfirmed)
M
XA
R
ISO 11841-2:2000
(reconfirmed)
ISO/TS 15827:2007
ISO 8715:2001
(reconfirmed)
TC 24
Particle characterization including sieving
ISO 9276-3:2008
ISO 22412:2008
TC 25
Cast irons and pig irons
ISO 9147:1987
(reconfirmed)
TC 28
Petroleum products and lubricants
ISO 18132-2:2008
TC 43
Acoustics
ISO 9052-1:1989
(reconfirmed)
TC 58
Gas cylinders
ISO 4706:2008
TC 60
Gears
ISO 9085:2002
ISO 14635-2:2004
ISO 14635-3:2005
TC 87
Cork
ISO 2067:1998
(reconfirmed)
ISO 2385:1993
(reconfirmed)
TC 89
Wood-based panels
ISO 2074:2007
ISO 18775:2008
TC 92
Fire safety
ISO 20632:2008
ISO 24473:2008
ISO 834-4:2000
(reconfirmed)
ISO 834-5:2000
(reconfirmed)
ISO 834-6:2000
(reconfirmed)
ISO 834-7:2000
(reconfirmed)
TC 96
Cranes
ISO 4301-4:1989
(reconfirmed)
ISO 10972-4:2007
ISO 12480-4:2007
ISO 22986:2007
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 2507-1:1995
(reconfirmed)
ISO 2507-2:1995
(reconfirmed)
ISO 2507-3:1995
(reconfirmed)
ISO 3114:1977
(reconfirmed)
ISO 3127:1994
(reconfirmed)
ISO 3514:1976
(reconfirmed)
ISO 9854-1:1994
(reconfirmed)
ISO 11173:1994
(reconfirmed)
ISO 13477:2008
TC 155
Nickel and nickel alloys
ISO 9725:1992
(reconfirmed)
TC 165
Timber structures
ISO 12579:2007
ISO 12580:2007
TC 172
Optics and photonics
ISO 8037-1:1986
(reconfirmed)
ISO 8040:2001
(reconfirmed)
TC 198
Sterilization of health care products
ISO 13408-1:2008
ISO 15883-4:2008
TC 206
Fine ceramics
ISO 23146:2008
ISO 26443:2008
TC 211
Geographic information/Geomatics
ISO/TS 19101-2:2008
ISO 19141:2008
TC 217
ISO 15819:2008
Cosmetics
Standards withdrawn
Period from 01 November to 30 November 2011
TC 6
Paper, board and pulps
ISO 777:2005
(replaced by ISO 12830:2011)
ISO 778:2005
(replaced by ISO 12830:2011)
ISO 779:2005
(replaced by ISO 12830:2011)
ISO 1830:2005
(replaced by ISO 12830:2011)
ISO 9668:1990
(replaced by ISO 12830:2011)
ISO 2493:1992
(replaced by ISO 2493-1:2010, ISO 2493-2:2011)
TC 23
Tractors and machinery for agriculture and forestry
ISO 11806:1997
(replaced by ISO 11806-1:2011)
ISO 14740:1998
(replaced by ISO 11680-2:2011, ISO 11806-2:2011)
ISO 14865:1998
(replaced by ISO 11806-2:2011)
TC 24
Particle characterization including sieving
ISO/TS 13762:2001
(replaced by )
TC 45
Rubber and rubber products
ISO 1746:1998
(replaced by ISO 10619-1:2011)
ISO 4672:1997
(replaced by ISO 10619-2:2011)
ISO 3384:2005
(replaced by ISO 3384-1:2011)
TC 59
Buildings and civil engineering works
ISO/TS 21929-1:2006
(replaced by ISO 21929-1:2011)
TC 61
Plastics
ISO 1133:2005
(replaced by ISO 1133-1:2011)
TC 104
Freight containers
ISO/PAS 18186:2010
(replaced by ISO 18186:2011)
TC 184
Automation systems and integration
ISO/TS 10303-28:2003
(replaced by ISO 10303-28:2007)
JTC 1
Information technology
ISO/IEC TR 9294:2005
(replaced by ISO/IEC 26511:2011)
Meeting calendar
(update at 01 November 2011)
* Information definite but meeting not yet formally convened
** Provisional
December 2011
1-2
Troy (USA)
TC 22/SC 11
Road vehicles/Safety glazing materials
2
Linz (Austria)
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
2
Brussels (Belgium)
TC 94/SC 3
Personal safety -- Protective clothing and equipment/Foot protection
2
La Plaine St-Denis
(France)
TC 158
Analysis of gases
6-7
Düsseldorf (Germany)
TC 17/SC 4
Steel/Heat treatable and alloy steels
7-8
La Plaine St-Denis
(France)
TC 17/SC 3
Steel/Steels for structural purposes
8-9
Kingston (Jamaica)
TC 93
Starch (including derivatives and by-products)
12-13
Copenhagen
(Denmark)
TC 59/SC 13
Buildings and civil engineering works/Organization of information about
construction works
12-16
Sydney (Australia)
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and
diagnostics of machines
13-14
Heidelberg (Germany)
TC 23/SC 15
Tractors and machinery for agriculture and forestry/Machinery for forestry
15
Beijing (China)
TC 197
Hydrogen technologies
16
Osaka (Japan)
TC 149/SC 1
Cycles/Cycles and major sub-assemblies
January 2012
11-12
Paris (France)
TC 257
General technical rules for determination of energy savings in renovation projects,
industrial enterprises and regions
12-13
Buenos Aires
(Argentina)
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
16-20
Cambridge,
Massachusetts
(USA)
TC 121/SC 3
Anaesthetic and respiratory equipment/Lung ventilators and related equipment
16-20
Melbourne
(Australia)
TC 121/SC 6
Anaesthetic and respiratory equipment/Medical gas systems
16-20
Tokyo (Japan)
TC 247
Fraud countermeasures and controls
20-22
Cambridge,
Massachusetts
(USA)
TC 121/SC 4
Anaesthetic and respiratory equipment/Terminology and semantics
24
Milan (Italy)
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
for industrial applications
TC 236
Project Committee: Project Management
*
January-February 2012
30-4
Paris (France)
February 2012
1
Bangkok
(Thailand)
*
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods
and testing conditions
1
Bangkok
(Thailand)
*
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
1-9
Charlotte (USA)
*
TC 213
Dimensional and geometrical product specifications and verification
2
Bangkok
(Thailand)
*
TC 123/SC 5
Plain bearings/Quality analysis and assurance
2
Bangkok
(Thailand)
TC 123/SC 6
Plain bearings/Terms and common items
2
Paris (France)
TC 258
Project, programme and portfolio management
3
Bangkok
(Thailand)
TC 123
Plain bearings
3
Bangkok
(Thailand)
TC 123/SC 7
Plain bearings/Special types of plain bearings
6
Pretoria (South
Africa)
TC 251
Project committee: Asset management
8
St. Petersburg,
Florida (USA)
TC 115
Pumps
13-14
Orlando (USA)
TC 184/SC 2
Automation systems and integration/Robots and robotic devices
13-14
Orlando (USA)
TC 219
Floor coverings
13-17
Dublin (Ireland)
TC 262
Project committee: Risk management
15-16
Geneva
(Switzerland)
TMB
Technical Management Board
20-24
Guangzhou
(China)
JTC 1/SC 6
Information technology/Telecommunications and information exchange between
systems
20-24
Kyoto (Japan)
JTC 1/SC 35
Information technology/User interfaces
20-24
Johannesburg
(South Africa)
TC 241
Project Committee: Road-Traffic Safety Management System
21
Paris (France)
TC 23/SC 2
Tractors and machinery for agriculture and forestry/Common tests
21-23
Nara (Japan)
TC 172/SC 9
Optics and photonics/Electro-optical systems
22-23
Courbevoie,
Paris (France)
TC 23/SC 14
Tractors and machinery for agriculture and forestry/Operator controls, operator
symbols and other displays, operator manuals
*
*
*
February-March 2012
28-2
Berlin (Germany)
TC 107
Metallic and other inorganic coatings
March 2012
13-16
Milan (Italy)
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
20-23
Buenos Aires
(Argentina)
JTC 2
Joint Project Committee - Energy efficiency and renewable energy sources - Common
terminology
26-28
Charlotte (USA)
TC 23/SC 17
Tractors and machinery for agriculture and forestry/Manually portable forest machinery
29
Frankfurt
(Germany)
TC 23/SC 19
Tractors and machinery for agriculture and forestry/Agricultural electronics
29-30
Charlotte (USA)
TC 23/SC 13
Tractors and machinery for agriculture and forestry/Powered lawn and garden
equipment
*
April 2012
15-20
(Unknown)
**
TC 110
Industrial trucks
15-20
(Unknown)
**
TC 110/SC 1
Industrial trucks/General terminology
15-20
(Unknown)
**
TC 110/SC 2
Industrial trucks/Safety of powered industrial trucks
16
Berlin (Germany)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
16-17
Graz (Austria)
**
TC 24/SC 4
Particle characterization including sieving/Particle characterization
16-20
La Plaine StDenis (France)
*
TC 198
Sterilization of health care products
16-20
Melbourne
(Australia)
**
TC 204
Intelligent transport systems
16-20
Chicago (USA)
TC 248
Project committee: Sustainability criteria for bioenergy
17
Senlis (France)
**
TC 117
Fans
18
Milan (Italy)
**
TC 44/SC 9
Welding and allied processes/Health and safety
19-20
Toulouse
(France)
*
TC 34/SC 12
Food products/Sensory analysis
20
Durban (South
Africa)
TC 135
Non-destructive testing
23-27
Nairobi (Kenya)
**
TC 34
Food products
23-27
Oslo (Norway)
**
TC 59/SC 14
Buildings and civil engineering works/Design life
23-27
Winterthur
(Switzerland)
**
TC 108/SC 2
Mechanical vibration, shock and condition monitoring/Measurement and evaluation of
mechanical vibration and shock as applied to machines, vehicles and structures
23-28
Yogyakarta
(Indonesia)
**
TC 130
Graphic technology
25-26
Moscow
(Russian
Federation)
**
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries/Pipeline transportation systems
26
Yokohama
(Japan)
**
TC 4/SC 4
Rolling bearings/Tolerances, tolerance definitions and symbols (including GPS)
26-27
Vienna (Austria)
TC 159
Ergonomics
27
Yokohama
TC 4/SC 12
Rolling bearings/Ball bearings
*
(Japan)
Bern
(Switzerland)
**
TC 113
Hydrometry
**
TC 242
Energy Management
April-May 2012
30-4
(Ireland)
May 2012
1-4
Jeju (Korea,
Republic of)
*
TC 28
Petroleum products and lubricants
6-9
Vancouver
(Canada)
*
TC 215
Health informatics
6-10
Haifa (Israel)
*
TC 184/SC 5
Automation systems and integration/Interoperability, integration, and architectures for
enterprise systems and automation applications
7
Duisburg
(Germany)
**
TC 44/SC 7
Welding and allied processes/Representation and terms
7-11
Berlin (Germany)
**
TC 46
Information and documentation
7-11
Berlin (Germany)
**
TC 46/SC 4
Information and documentation/Technical interoperability
7-11
Berlin (Germany)
*
TC 46/SC 11
Information and documentation/Archives/records management
8
Chicago (USA)
**
TC 68/SC 7
Financial services/Core banking
8-10
Sydney
(Australia)
*
TC 145/SC 1
Graphical symbols/Public information symbols
10
Berlin (Germany)
*
TC 24/SC 8
Particle characterization including sieving/Test sieves, sieving and industrial screens
10
Chicago (USA)
*
TC 68
Financial services
11
Berlin (Germany)
**
TC 24
Particle characterization including sieving
14-15
Stockholm
(Sweden)
*
JTC 1/SC 27
Information technology/IT Security techniques
14-15
Rio de Janeiro
(Brazil)
**
TC 67/SC 4
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries/Drilling and production equipment
15-16
Luzern
(Switzerland)
*
TC 23/SC 3
Tractors and machinery for agriculture and forestry/Safety and comfort
15-17
Buenos Aires
(Argentina)
*
TC 67/SC 5
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries/Casing, tubing and drill pipe
20-25
Jeju (Korea,
Republic of)
*
JTC 1/SC 7
Information technology/Software and systems engineering
20-25
Seoul (Korea,
Republic of)
**
TC 228
Tourism and related services
21-23
Daejon (Korea,
Republic of)
*
TC 249
Traditional chinese medicine
21-25
Berlin (Germany)
**
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
22
Delft
(Netherlands)
**
TC 195
Building construction machinery and equipment
22
Delft
(Netherlands)
*
TC 195/SC 1
Building construction machinery and equipment/Machinery and equipment for
concrete work
25
Seoul (Korea,
**
TC 44/SC 12
Welding and allied processes/Soldering materials
Republic of)
(Australia)
**
TC 145
Graphical symbols
June 2012
4-5
Berlin (Germany)
**
TC 44/SC 3
Welding and allied processes/Welding consumables
4-8
Paris (France)
**
TC 85
Nuclear energy, nuclear technologies, and radiological protection
4-8
St Paul,
Minnesota (USA)
*
TC 94/SC 6
Personal safety -- Protective clothing and equipment/Eye and face protection
6-7
(Fiji)
**
COPOLCO
Committee on consumer policy
9
Berlin (Germany)
*
TC 96
Cranes
11-12
Paris (France)
*
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
11-13
Dresden
(Germany)
*
TC 126
Tobacco and tobacco products
11-15
Kyoto (Japan)
*
TC 121
Anaesthetic and respiratory equipment
11-15
Kyoto (Japan)
**
TC 121/SC 1
Anaesthetic and respiratory equipment/Breathing attachments and anaesthetic
machines
11-15
Prague (Czech
Republic)
**
TC 251
Project committee: Asset management
11-16
La Plaine StDenis (France)
*
TC 147
Water quality
12-13
(France)
**
TC 17/SC 17
Steel/Steel wire rod and wire products
13-14
Geneva
(Switzerland)
*
TMB
Technical Management Board
14
Westminster,
Colorado (USA)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries/Drilling and completion fluids, and well cements
14-15
(Europe)
**
TC 91
Surface active agents
16-22
Tokyo (Japan)
**
TC 69
Applications of statistical methods
19-20
Yangzhou
(China)
**
TC 100
Chains and chain sprockets for power transmission and conveyors
19-22
Vienna (Austria)
*
REMCO
Committee on reference materials
20-21
Milan (Italy)
**
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
22
Porto (Portugal)
*
TC 87
Cork
24-29
Madrid (Spain)
*
TC 37
Terminology and other language and content resources
24-30
Bangkok
(Thailand)
*
TC 207
Environmental management
25-29
Brussels
(Belgium)
*
TC 34/SC 9
Food products/Microbiology
25-29
Madrid (Spain)
*
TC 37/SC 2
Terminology and other language and content resources/Terminographical and
lexicographical working methods
25-29
Buffalo (USA)
*
TC 108
Mechanical vibration, shock and condition monitoring
25-29
Buffalo (USA)
*
TC 108/SC 3
Mechanical vibration, shock and condition monitoring/Use and calibration of vibration
and shock measuring instruments
25-29
Buffalo (USA)
*
TC 108/SC 6
Mechanical vibration, shock and condition monitoring/Vibration and shock generating
systems
29
Oranjewoud
(Netherlands)
*
TC 188
Small craft
Orlando (USA)
**
TC 10
Technical product documentation
Brugge
(Belgium)
**
TC 86/SC 6
Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat
pumps
(Unknown)
**
TC 171
Document management applications
(Unknown)
**
TC 171/SC 1
Document management applications/Quality
(Unknown)
**
TC 171/SC 2
Document management applications/Application issues
(Canada)
**
TC 171/SC 3
Document management applications/General issues
(Unknown)
**
TC 171/SC 3
Document management applications/General issues
(Canada)
**
TC 34/SC 4
Food products/Cereals and pulses
(China)
**
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
(France)
**
TC 211
Geographic information/Geomatics
2nd Quarter 2012
July 2012
18
Denver (USA)
**
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied
processes personnel
18-19
Berlin (Germany)
*
TC 261
Additive manufacturing
20
Lancaster (USA)
**
TC 43/SC 2
Acoustics/Building acoustics
21
Stockholm
(Sweden)
**
JTC 1/SC 29
Information technology/Coding of audio, picture, multimedia and hypermedia
information
**
JTC 1/SC 35
Information technology/User interfaces
August 2012
27-31
Montreal
(Canada)
September 2012
3-7
La Rochelle
(France)
**
TC 163
Thermal performance and energy use in the built environment
3-7
La Rochelle
(France)
**
TC 205
Building environment design
3-8
Zurich
(Switzerland)
**
TC 142
Cleaning equipment for air and other gases
8-16
Busan (Korea,
Republic of)
*
JTC 1/SC 36
Information technology/Information technology for learning, education and training
10
Milan (Italy)
*
TC 21/SC 2
Equipment for fire protection and fire fighting/Manually transportable fire extinguishers
10-11
Geneva
(Switzerland)
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system
software interfaces
10-14
Nancy (France)
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical
vibration and shock
17-21
Stockholm
(Sweden)
**
TC 165
Timber structures
18-20
Berlin (Germany)
*
TC 122
Packaging
19-20
Rio de Janeiro
(Brazil)
*
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries
19-21
San Diego (USA) **
GA
General Assembly
22
San Diego (USA) **
COUNCIL
Council
23-26
Rio de Janeiro
(Brazil)
**
TC 164/SC 3
Mechanical testing of metals/Hardness testing
24-25
Ottawa (Canada)
*
TAG 8
Building
24-25
Rio de Janeiro
(Brazil)
**
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear
(T)
24-26
Sydney
(Australia)
*
TC 54
Essential oils
24-28
Stockholm
(Sweden)
**
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
24-28
Vienna (Austria)
**
TC 215
Health informatics
25-26
Rio de Janeiro
(Brazil)
**
TC 164/SC 2
Mechanical testing of metals/Ductility testing
25-27
Rio de Janeiro
(Brazil)
**
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
27
Rio de Janeiro
(Brazil)
**
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
28
Rio de Janeiro
(Brazil)
**
TC 164
Mechanical testing of metals
Milan (Italy)
**
TC 21/SC 3
Equipment for fire protection and fire fighting/Fire detection and alarm systems
Milan (Italy)
**
TC 21/SC 6
Equipment for fire protection and fire fighting/Foam and powder media and firefighting
systems using foam and powder
Milan (Italy)
**
TC 21/SC 8
Equipment for fire protection and fire fighting/Gaseous media and firefighting systems
using gas
(Korea, Republic
of)
**
TC 133
Sizing systems and designations for clothes
Zibo city (China)
**
TC 206
Fine ceramics
Cadiz (Spain)
**
TC 213
Dimensional and geometrical product specifications and verification
Rotorua (New
Zealand)
**
TC 218
Timber
(Switzerland)
**
TC 226
Materials for the production of primary aluminium
September-October 2012
30-6
Paris (France)
*
TC 106
Dentistry
30-6
Chicago (USA)
**
TC 130
Graphic technology
**
TC 254
Safety of amusement rides and amusement devices
3rd Quarter 2012
Berlin (Germany)
October 2012
1-2
Ottawa (Canada)
*
TC 34/SC 11
Food products/Animal and vegetable fats and oils
3
Ottawa (Canada)
*
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
5
Berlin (Germany)
*
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
8-12
Sapporo (Japan)
*
TC 92
Fire safety
9-10
Montreal
(Canada)
*
TC 199
Safety of machinery
10-11
Berlin (Germany)
*
TC 167
Steel and aluminium structures
10-17
(China)
**
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
11-12
Tokyo (Japan)
*
TC 119
Powder metallurgy
14-19
Tokyo (Japan)
**
TC 59
Buildings and civil engineering works
14-19
Praia do Forte
(Brazil)
TC 127
Earth-moving machinery
15
Sydney
(Australia)
**
TC 2/SC 7
Fasteners/Reference standards
15-17
(Korea, Republic
of)
**
TC 17
Steel
15-17
(Korea, Republic
of)
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
15-17
(Korea, Republic
of)
**
TC 17/SC 3
Steel/Steels for structural purposes
15-17
(Korea, Republic
of)
**
TC 17/SC 4
Steel/Heat treatable and alloy steels
15-17
(Korea, Republic
of)
**
TC 17/SC 7
Steel/Methods of testing (other than mechanical tests and chemical analysis)
15-17
(Korea, Republic
of)
**
TC 17/SC 9
Steel/Tinplate and blackplate
15-17
(Korea, Republic
of)
**
TC 17/SC 10
Steel/Steel for pressure purposes
15-17
(Korea, Republic
of)
**
TC 17/SC 11
Steel/Steel castings
15-17
(Korea, Republic
of)
**
TC 17/SC 12
Steel/Continuous mill flat rolled products
15-17
(Korea, Republic
of)
**
TC 17/SC 15
Steel/Railway rails, rails fasteners, wheels and wheelsets
15-17
(Korea, Republic
of)
**
TC 17/SC 17
Steel/Steel wire rod and wire products
15-17
(Korea, Republic
of)
**
TC 17/SC 19
Steel/Technical delivery conditions for steel tubes for pressure purposes
15-17
(Korea, Republic
of)
**
TC 17/SC 20
Steel/General technical delivery conditions, sampling and mechanical testing methods
15-19
Montreal
(Canada)
*
TC 6
Paper, board and pulps
15-19
Amsterdam
*
TC 146
Air quality
(Netherlands)
16
Sydney
(Australia)
**
TC 2/SC 11
Fasteners/Fasteners with metric external thread
17
Sydney
(Australia)
**
TC 2/SC 14
Fasteners/Surface coatings
17-19
Guilin (China)
*
TC 202
Microbeam analysis
18
Sydney
(Australia)
**
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
19
Sydney
(Australia)
**
TC 2
Fasteners
21-26
Sapporo (Japan)
*
TC 92/SC 1
Fire safety/Fire initiation and growth
21-26
Sapporo (Japan)
**
TC 92/SC 2
Fire safety/Fire containment
21-26
Sapporo (Japan)
**
TC 92/SC 3
Fire safety/Fire threat to people and environment
22-26
(Japan)
**
TC 181
Safety of toys
22-27
Jeju (Korea,
Republic of)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
23
Sydney
(Australia)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
for soil, waste and drainage (including land drainage)
24
Sydney
(Australia)
**
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
for water supplies
24
Sydney
(Australia)
**
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
for the supply of gaseous fuels
25
Sydney
(Australia)
**
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
for industrial applications
25
Sydney
(Australia)
**
TC 138/SC 5
Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes,
fittings and valves of plastic materials and their accessories -- Test methods and basic
specifications
25
Sydney
(Australia)
**
TC 138/SC 6
Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes
and fittings for all applications
25
Sydney
(Australia)
**
TC 138/SC 7
Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary
equipment of plastics materials
25-26
Tampa, Florida
(USA)
**
TC 112
Vacuum technology
25-27
Florida (USA)
**
TC 201
Surface chemical analysis
26
Sydney
(Australia)
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
(France)
**
TC 70/SC 7
Internal combustion engines/Tests for lubricating oil filters
TC 34/SC 17
Food products/Management systems for food safety
October-November 2012
29-1
Saitama (Japan)
November 2012
12
(Japan)
**
TC 244
Industrial furnaces and associated processing equipment
15-16
Xian (China)
**
TC 227
Springs
Tokyo (Japan)
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
(Korea, Republic
of)
**
TC 23/SC 7
Tractors and machinery for agriculture and forestry/Equipment for harvesting and
conservation
(Unknown)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries/Drilling and completion fluids, and well cements
(USA)
**
TC 118/SC 6
Compressors and pneumatic tools, machines and equipment/Air compressors and
compressed air systems
Kyoto (Japan)
**
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
**
TC 211
Geographic information/Geomatics
(Europe)
**
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental data
representation
(USA)
**
TC 36
Cinematography
Chicago (USA)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
(South Africa)
**
TC 102
Iron ore and direct reduced iron
(Europe)
**
TC 146/SC 6
Air quality/Indoor air
(Finland)
**
TC 190
Soil quality
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
**
JTC 1/SC 35
Information technology/User interfaces
Helsinki
(Finland)
**
TC 117
Fans
Paris (France)
**
TC 29/SC 5
Small tools/Grinding wheels and abrasives
Shenzen (China)
**
TC 130
Graphic technology
(USA)
**
TC 178
Lifts, escalators and moving walks
4th Quarter 2012
(Saudi Arabia)
Month unknown 2012
January 2013
(Unknown)
February-March 2013
25-1
(South America)
April 2013
10-11
May 2013
13-16
Chicago (USA)
**
TC 195
Building construction machinery and equipment
13-17
(Italy)
**
TC 29
Small tools
13-17
(Italy)
**
TC 29/SC 8
Small tools/Tools for pressing and moulding
13-17
Guangzhou
(China)
*
TC 68
Financial services
27-31
Shanghai
(China)
**
TC 4
Rolling bearings
Ottawa (Canada)
**
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
(China)
**
TC 10
Technical product documentation
Paris (France)
**
TC 46/SC 11
Information and documentation/Archives/records management
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries/Drilling and completion fluids, and well cements
**
JTC 1/SC 35
Information technology/User interfaces
(Korea, Republic
of)
**
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
(Unknown)
**
TC 21
Equipment for fire protection and fire fighting
(Korea, Republic
of)
**
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods
and testing conditions
(Korea, Republic
of)
**
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
(Korea, Republic
of)
**
TC 123/SC 5
Plain bearings/Quality analysis and assurance
(Korea, Republic
of)
**
TC 123/SC 6
Plain bearings/Terms and common items
(Korea, Republic
of)
**
TC 123/SC 7
Plain bearings/Special types of plain bearings
Tokyo (Japan)
**
TC 142
Cleaning equipment for air and other gases
June 2013
Washington, D.C
(USA)
August 2013
26-30
(South America)
September 2013
October 2013
7
Istanbul (Turkey)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
7-11
Istanbul (Turkey)
**
TC 38
Textiles
8
Istanbul (Turkey)
**
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
9
Istanbul (Turkey)
**
TC 38/SC 23
Textiles/Fibres and yarns
10
Istanbul (Turkey)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
11
Garching
(Germany)
**
TC 60
Gears
11
Garching
(Germany)
**
TC 60/SC 1
Gears/Nomenclature and wormgearing
11
Garching
(Germany)
**
TC 60/SC 2
Gears/Gear capacity calculation
(France)
**
TC 111/SC 1
Round steel link chains, chain slings, components and accessories/Chains and chain
slings
Mexico (Mexico)
**
TC 113
Hydrometry
(Japan)
**
TC 206
Fine ceramics
**
TC 201
Surface chemical analysis
November 2013
10
Okinawa (Japan)
4th Quarter 2013
(Korea, Republic
of)
**
TC 106
Dentistry
(Australia)
**
REMCO
Committee on reference materials
(South Africa)
**
TC 27
Solid mineral fuels
(South Africa)
**
TC 37
Terminology and other language and content resources
(Unknown)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
(Korea, Republic
of)
**
TC 107
Metallic and other inorganic coatings
Porto de
Galinhas (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Norway)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
for soil, waste and drainage (including land drainage)
(Sweden)
**
TC 163
Thermal performance and energy use in the built environment
Amsterdam
(Netherlands)
**
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
(Unknown)
**
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
(South Africa)
**
TC 202
Microbeam analysis
(Sweden)
**
TC 205
Building environment design
(Portugal)
**
TC 228
Tourism and related services
(South Africa)
**
TC 242
Energy Management
**
TC 46/SC 11
Information and documentation/Archives/records management
**
TC 178
Lifts, escalators and moving walks
(USA)
**
REMCO
Committee on reference materials
(Brazil)
**
TC 28
Petroleum products and lubricants
Beijing (China)
**
TC 36
Cinematography
(Germany)
**
TC 37
Terminology and other language and content resources
(USA)
**
TC 142
Cleaning equipment for air and other gases
(South Africa)
**
REMCO
Committee on reference materials
London (United
Kingdom)
**
TC 142
Cleaning equipment for air and other gases
Month unknown 2013
May 2014
Washington, D.C
(USA)
September 2014
(South Africa)
Month unknown 2014
Month unknown 2015