ISO Update
Supplement to ISO Focus+ September 2013
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 August to 31 August 2013
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 4
Rolling bearings
ISO/CD 104
Rolling bearings — Thrust bearings — Boundary dimensions, general plan
TC 8
Ships and marine technology
ISO/CD 29400
Ships and marine technology — Offshore wind energy — Ports and marine operations
TC 10
Technical product documentation
ISO/CD 13715
Technical drawings — Edges of undefined shape — Vocabulary and indications
ISO/CD
81346-12
Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations —
Part 12: Buildings and building services
TC 17
Steel
ISO/CD
22034-2
Steel wire and wire products — Part 2: Tolerances on wire dimensions
TC 20
Aircraft and space vehicles
ISO/CD 2100
Aircraft — Electrical connectors — Tests
ISO/CD 6858
Aircraft — Ground support electrical supplies — General requirements
ISO/CD 15699
Aerospace vehicle interconnection installation practices
ISO/CD 17689
Space systems — Interface control documents between ground technological equipment, launch site systems and launch
vehicle with payload
TC 21
Equipment for fire protection and fire fighting
ISO/CD 7240-8
Fire detection and alarm systems — Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with
a heat sensor
TC 22
Road vehicles
ISO/CD
17536-2
Road vehicles — Aerosol separator performance test for internal combustion engines — Part 2: Laboratory gravimetric test
method
ISO/DTS
17536-3
Road vehicles — Aerosol separator performance test for internal combustion engines — Part 3: Engine gravimetric test
method
ISO/DTS
13499
Road vehicles — Multimedia data exchange format for impact tests
ISO/DTS
17242
Quasi-static Calibration Procedure for Belt Force Transducers
TC 23
Tractors and machinery for agriculture and forestry
ISO/CD
17989-1
Tractors and machinery for agriculture and forestry — Sustainability — Part 1: Principles
ISO/CD 4254-7
Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters
TC 28
Petroleum products and lubricants
ISO/CD 20844
Petroleum products and lubricants — Determination of the shear stability of polymer-containing oils using a diesel injector
nozzle — Complementary element
ISO/CD 26422
Petroleum and related products — Determination of shear stability of lubricating oils containing polymers — Method using a
tapered roller bearing
TC 34
Food products
ISO/CD
19046-1
Cheese — Determination of propionic acid by chromatography — Part 1: Reference method
ISO/CD
19046-2
Cheese — Determination of propionic acid by chromatography — Part 2: Routine method
TC 35
Paints and varnishes
ISO/CD 3668
Paints and varnishes — Visual comparison of the colour of paints
ISO/CD 8502-3
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface
cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
ISO/CD 8502-4
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface
cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application
ISO/CD 8502-9
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface
cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts
TC 38
Textiles
ISO/CD 137
Wool — Determination of fibre diameter — Projection microscope method
ISO/CD 1136
Wool — Determination of mean diameter of fibres — Air permeability method
TC 43
Acoustics
ISO/CD 1996-2
Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of environmental
noise levels
ISO
3745:2012/CD
Amd 1
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms — Amendment 1
ISO/CD
Acoustics — Software for the calculation of sound outdoors — Part 1: Quality requirements and quality assurance
17534-1
ISO/DTR
17534-2
Acoustics — Software for the calculation of sound outdoors — Part 2: General recommendations for test cases and quality
assurance interface
TC 45
Rubber and rubber products
ISO/DTS
22762-4
Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3
TC 92
Fire safety
ISO/DTR
17755
Fire Safety — Statistical data
TC 108
Mechanical vibration, shock and condition monitoring
ISO/CD
16063-32
Methods for the calibration of vibration and shock transducers — Part 32: Resonance testing — Testing the frequency and the
phase response of accelerometers by means of shock excitation
ISO/CD
16063-33
Methods for the calibration of vibration and shock transducers — Part 33: Testing of magnetic field sensitivity
TC 113
Hydrometry
ISO/DTR 9212
Hydrometry — Methods of measurement of bedload discharge
TC 131
Fluid power systems
ISO/CD 1219-3
Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected
symbols in circuit diagrams
ISO/CD 8434-1
Metallic tube connections for fluid power and general use — Part 1: 24 degree cone connectors
ISO/CD 8434-2
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
ISO/CD 8434-6
Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring
TC 133
Clothing sizing systems - size designation, size measurement methods and digital fittings
ISO/CD
18825-1
Clothing — Digital fittings — Part 1: Vocabulary and terminology used for the virtual human body
ISO/CD
18825-2
Clothing — Digital fittings — -- Part 2: Vocabulary and terminology used for virtual body dimensions of the virtual human body
ISO/CD
18825-3
Clothing — Digital fittings — Part 3: Vocabulary and terminology used for virtual bones and joints of the virtual human body
ISO/CD
18825-4
Clothing — Digital fittings — Part 4: Vocabulary and terminology used for the virtual torso, arms and legs of the virtual human
body
ISO/CD
18825-5
Clothing — Digital fittings — Part 5: Vocabulary and terminology used for the virtual head and face of the virtual human body
ISO/CD
18825-6
Clothing — Digital fittings — Part 6: Vocabulary and terminology used for the virtual hand of the virtual human body
ISO/CD
18825-7
Clothing — Digital fittings — Part 7: Vocabulary and terminology used for the virtual foot of the virtual human body
ISO/CD 18831
Clothing — Digital fittings — Attributes of virtual garments
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 16611
Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced
thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests
ISO/DTS
18853
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Guidance for the assessment of
conformity
TC 146
Air quality
ISO/CD
12219-6
Interior air of road vehicles — Part 6: Method for the determination of the emissions of semi-volatile organic compounds from
vehicle interior parts and materials — Small chamber method
TC 160
Glass in building
ISO/CD 18178
Glass in building — Laminated solar PV glass
TC 164
Mechanical testing of metals
ISO/CD 148-1
Metallic materials — Charpy pendulum impact test — Part 1: Test method
ISO/CD 148-2
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
ISO/CD 148-3
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces
for indirect verification of pendulum impact machines
ISO/CD 14556
Steel — Charpy V-notch pendulum impact test — Instrumented test method
TC 171
Document management applications
ISO/CD 18160
Document management — Digital preservation — Analog recording to silvergelatin microform
TC 180
Solar energy
ISO/CD
22975-1
Solar Energy — Collector components and materials — Part 1: Evacuated tubes — Durability and performance
ISO/CD
22975-2
Solar Energy — Collector components and materials — Part 2: Heat-pipe for evacuated tubes — Durability and performance
TC 193
Natural gas
ISO/CD 6976
Natural gas — Calculation of calorific values, density, relative density and Wobbe index from composition
TC 201
Surface chemical analysis
ISO/CD 18337
Surface chemical analysis — Measurement of lateral resolution of confocal fluorescence microscope
TC 206
Fine ceramics
ISO/CD 15733
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for tensile stress-strain behaviour of
continuous, fibre- reinforced composites at room temperature
ISO/CD 17942
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of boron nitride powders
ISO/CD 17947
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride
powders
TC 210
Quality management and corresponding general aspects for medical devices
ISO/CD
16142-1
Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential
principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of
standards
TC 215
Health informatics
ISO/DTS
17439
Health informatics — Development of terms and definitions for health informatics and glossaries
ISO/CD
21549-5
Health informatics — Patient healthcard data — Part 5: Identification data
TC 229
Nanotechnologies
ISO/DTR
16197
Nanotechnologies - Guidance on toxicological screening methods for manufactured nanomaterials
JTC 1
Information technology
ISO/IEC CD
15026-3
Systems and software engineering — Systems and software assurance — Part 3: System integrity levels
ISO/IEC/IEEE
CD 15288
Systems and software engineering — System life cycle processes
ISO/IEC CD
25066
Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Common
industry Format for Usability — Evaluation Report
ISO/IEC CD
29110-1
Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 1: Overview
ISO/IEC CD
29110-2
Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 2: Framework and taxonomy
ISO/IEC CD
29110-3-1
Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-1: Capability assessment guide
ISO/IEC CD
29110-3-2
Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-2: Conformity Audit Guide
ISO/IEC
18013-3:2009/
PDAM 3
Information technology — Personal identification — ISO-compliant driving licence — Part 3: Access control, authentication
and integrity validation — Amendment 3: PACE
ISO/IEC CD
17825
esting methods for the mitigation of non-invasive attack classes against cryptographic modules
ISO/IEC CD
24711
Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer
components
ISO/IEC CD
29102
Information technology — Office equipment — Method for the determination of ink cartridge photo yield for colour printing with
inkjet printers and multi-function devices that contain inkjet printer components
ISO/IEC CD
29167-13
Information technology — Automatic identification and data capture techniques — Part 13: Air Interface for security services
crypto suite Grain-128A
ISO/IEC
19794-6:2011/
PDAM 2
Information technology — Biometric data interchange formats — Part 6: Iris image data — Amendment 2: XML Encoding
DIS circulated
Period from 01 August to 31 August 2013
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote
terminates
TC 6
Paper, board and pulps
ISO/DIS
5630-7
*
Paper and board — Accelerated ageing — Part 7: Exposure to light
2013-11-24
ISO/DIS
12625-15
*
Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of
brightness and colour with C/2° (indoor daylight) illuminant
2014-01-30
ISO/DIS
12625-16
*
Tissue paper and tissue products — Part 16: Determination of optical properties — Opacity (paper
backing) — Diffuse reflectance method
2014-01-30
TC 8
ISO/DIS
17325-1
Ships and marine technology
*
Ships and marine technology — Marine environment protection — Oil booms — Part 1: Design requirements
2013-11-26
TC 17
ISO/DIS 630-5
Steel
*
Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric
corrosion resistance
2013-11-09
(Revision of ISO 4952:2006)
ISO/DIS 630-6
*
Structural steels — Part 6: Technical delivery conditions for seismic improved structural steels for building
2013-11-09
(Revision of ISO 24314:2006)
ISO/DIS 4998
*
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
2013-11-06
(Revision of ISO 4998:2011)
ISO/DIS 4999
*
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and
structural qualities
2013-11-06
(Revision of ISO 4999:2011)
ISO/DIS 5954
*
Cold-reduced carbon steel sheet according to hardness requirements
2013-11-06
(Revision of ISO 5954:2007)
ISO/DIS 6932
*
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
2013-11-06
(Revision of ISO 6932:2008)
TC 20
ISO/DIS 16457
Aircraft and space vehicles
*
Space systems — Space environment (natural and artificial) — The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere
2013-11-26
(Revision of ISO/TS 16457:2009)
ISO/DIS 16709
*
Realtime solar activity and space environment information for spacecraft operation
2013-11-29
TC 22
ISO/DIS
17447-1
Road vehicles
*
Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 1: Basic
characteristics and dimensions for metal-sheath-type glow-plugs
2013-11-13
(Revision of ISO 6550-1:1994, ISO 6550-2:1994, ISO 6550-3:2009, ISO 7578:2008, ISO 6550-4:2009,
ISO/NP 17447)
ISO/DIS
17447-2
*
Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 2: Basic
characteristics and dimensions for ceramic-sheath-type glow-plugs
2013-11-13
(Revision of ISO 6550-1:1994, ISO 6550-2:1994, ISO 6550-3:2009, ISO 7578:2008, ISO 6550-4:2009,
ISO/NP 17447)
ISO/DIS
17447-3
*
Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 3: Tests and
requirements
2013-11-13
TC 24
ISO/DIS 17867
Particle characterization including sieving
*
Particle size analysis — Small-angle X-ray scattering
2013-11-13
TC 28
ISO/DIS 3679
Petroleum products and lubricants
*
Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
2014-01-23
(Revision of ISO 3679:2004, ISO 3680:2004)
TC 29
ISO/DIS
12164-3
Small tools
*
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
2013-11-29
(Revision of ISO 12164-3:2008)
ISO/DIS
12164-4
*
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
2013-11-29
(Revision of ISO 12164-4:2008)
TC 34
ISO/DIS 22004
Food products
*
Food safety management systems — Guidance on the application of ISO 22000
2013-11-20
(Revision of ISO/TS 22004:2005)
TC 38
Textiles
ISO/DIS 17617
*
Textiles — Determination of moisture drying rate
2013-11-23
TC 43
ISO
3743-2:1994/D
Amd 1
Acoustics
*
TC 44
ISO/DIS 13469
Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering
methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test
rooms — Amendment 1
2014-01-09
Welding and allied processes
*
Mechanical joining — Form-fit blind rivets and (lock) bolt joints — Specifications and qualification of
testing procedures
2013-11-24
ISO
2503:2009/DA
md 1
*
ISO
5172:2006/DA
md 2
*
ISO
5175:1987/DA
md 1
*
ISO
7291:2010/DA
md 1
*
Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for
gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) — Amendment 1
2014-01-09
Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications and tests —
Amendment 2
2014-01-09
Equipment used in gas welding, cutting and allied processes — Safety devices for fuel gases and oxygen
or compressed air — General specifications, requirements and tests — Amendment 1
2013-11-09
Gas welding equipment — Pressure regulators for manifold systems used in welding, cutting and allied
processes up to 30 MPa (300 bar) — Amendment 1
2014-01-09
TC 45
Rubber and rubber products
ISO/DIS
16301.2
Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks and for
hydraulic power units used in hydraulic tools — Specification
2013-10-06
ISO
2440:1997/DA
md 2
*
2014-01-23
TC 59
ISO/DIS 16745
Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 2
Buildings and civil engineering works
*
Environmental performance of buildings — Carbon Metric of a building — Use stage
2013-11-14
TC 67
ISO/DIS 16961
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries
*
Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks
2014-01-23
ISO/DIS
15551-1
Petroleum and natural gas industries — Drilling ans production equipment — Part 1: Electric submersible
pump systems for artificial lift
2014-01-30
ISO/DIS
19901-1
*
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 1: Metocean
design and operating considerations
2014-01-23
(Revision of ISO 19901-1:2005)
TC 85
ISO/DIS 17099
Nuclear energy, nuclear technologies, and radiological protection
*
Radiation Protection — Performance criteria for laboratories using the cytokinesis-blocked micronucleus
assay in blood lymphocytes for biological dosimetry
2013-11-26
ISO/DIS
18589-3
*
Measurement of radioactivity in the environment — Soil — Part 3: Measurement of gamma-emitting
radionuclides
2013-11-29
(Revision of ISO 18589-3:2007)
TC 87
ISO/DIS 20752
Cork
*
Cork stoppers — Determination of releasable 2, 4, 6-trichloroanisol (TCA)
2013-11-06
(Revision of ISO 20752:2007)
TC 106
ISO/DIS 6872
Dentistry
*
Dentistry — Ceramic materials
2014-01-30
(Revision of ISO 6872:2008)
TC 107
ISO/DIS 4528
Metallic and other inorganic coatings
*
Vitreous and porcelain enamel finishes — Guide to selection of test methods for vitreous and porcelain
enamelled areas of articles
2014-01-30
(Revision of ISO 4528:2000)
TC 121
ISO/DIS
80601-2-72
Anaesthetic and respiratory equipment
*
Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
2014-01-23
(Revision of ISO 10651-2:2004)
TC 131
ISO/DIS 10766
Fluid power systems
*
Hydraulic fluid power — Cylinders — Housing dimensions for rectangular-section-cut bearing rings for
pistons and rods
2013-11-29
(Revision of ISO 10766:2006)
TC 138
ISO/DIS 3458
Plastics pipes, fittings and valves for the transport of fluids
*
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for
leaktightness under internal pressure
2014-01-23
(Revision of ISO 3458:1976)
ISO/DIS 3501
*
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for
resistance to pull-out under constant longitudinal force
2014-01-23
(Revision of ISO 3501:1976)
ISO/DIS 3503
*
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for
leaktightness under internal pressure of assemblies subjected to bending
2014-01-23
(Revision of ISO 3503:1976)
ISO/DIS 13844
*
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test
method for leaktightness under negative pressure, angular deflection and deformation
2014-01-23
(Revision of ISO 13844:2000)
ISO/DIS 13845
*
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pipes —
Test method for leaktightness under internal pressure and with angular deflection
2014-01-23
(Revision of ISO 13845:2000)
TC 150
ISO/DIS 16061
Implants for surgery
*
Instrumentation for use in association with non-active surgical implants — General requirements
2014-01-23
(Revision of ISO 16061:2008)
TC 171
ISO/DIS
24517-2
Document management applications
*
Document management — Engineering document format using PDF — Part 2: Use of 32000-2 including
support for long-term preservation (PDF/E-2)
2013-11-22
TC 173
ISO/DIS 17069
Assistive products for persons with disability
*
Accessible design — Consideration and assistive products for accessible meeting
2013-11-06
TC 182
ISO/DIS 18674
Geotechnics
*
Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — General
rules
2014-01-09
TC 184
ISO/DIS
22400-1
Automation systems and integration
*
Automation systems and integration — Key performance indicators (KPIs) for manufacturing operations
management — Part 1: Overview, concepts and terminology
2013-11-22
TC 199
ISO
13849-1:2006/
DAmd 1
Safety of machinery
*
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design —
Amendment 1
2014-01-30
ISO/DIS 14120
*
Safety of machinery — Guards — General requirements for the design and construction of fixed and
movable guards
2014-01-23
(Revision of ISO 14120:2002)
TC 204
ISO/DIS 12855
Intelligent transport systems
*
Electronic fee collection — Information exchange between service provision and toll charging
2014-01-30
(Revision of ISO 12855:2012, ISO 12855:2012/Cor 1:2013)
TC 206
ISO/DIS 17138
Fine ceramics
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic
composites at room temperature — Determination of flexural strength
2013-11-10
ISO/DIS 17139
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Thermophysical properties — Determination of thermal expansion
2013-11-10
ISO/DIS 17140
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic
composites at room temperature — Determination of fatigue properties at constant amplitude
2013-11-10
ISO/DIS 17142
ISO/DIS 17161
*
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic
composites at high temperature in air at atmospheric pressure — Determination of fatigue properties at
constant amplitude
2013-11-10
Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Guide to the
determination of the degree of misalignment in uniaxial mechanical tests
2013-11-10
ISO/DIS 17170
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for sphere indentation
of porous ceramics
2013-11-14
ISO/DIS 20507
*
Fine ceramics (advanced ceramics, advanced technical ceramics) — Vocabulary
2013-11-15
(Revision of ISO 20507:2003)
TC 210
ISO/DIS
80369-20
Quality management and corresponding general aspects for medical devices
*
Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common test methods
2014-01-23
TC 211
ISO/DIS
19135-1
Geographic information/Geomatics
*
Geographic information — Procedures for item registration — Part 1: Fundamentals
2014-01-30
(Revision of ISO 19135:2005)
TC 218
ISO/DIS
13061-1.2
Timber
*
Physical and mechanical properties of wood - Test methods for small clear specimen — Part 1: Determination of moisture content for physical and mechanical tests
2013-10-09
(Revision of ISO 3130:1975)
ISO/DIS
13061-2.2
*
Physical and mechanical properties of wood - Test methods for small clear specimen — Part 2: Determination of density for physical and mechanical tests
2013-10-09
(Revision of ISO 3130:1975)
ISO/DIS
13061-3.2
*
Physical and mechanical properties of wood - Test methods for small clear specimen — Part 3: Determination of ultimate strength in static bending
2013-10-09
(Revision of ISO 3130:1975)
ISO/DIS
13061-4.2
*
Physical and mechanical properties of wood - Test methods for small clear specimen — Part 4: Determination of modulus of elasticity in static bending
2013-10-09
(Revision of ISO 3130:1975)
ISO/DIS
13061-6.2
*
Physical and mechanical properties of wood - Test methods for small clear specimen — Part 6: Determination of ultimate tensile stress parallel to grain
2013-10-09
(Revision of ISO 3130:1975)
ISO/DIS
13061-7.2
*
Physical and mechanical properties of wood - Test methods for small clear specimen — Part 7: Determination of ultimate tensile stress perpendicular to grain
2013-10-09
(Revision of ISO 3130:1975)
ISO/DIS 17959
*
General requirements for solid wood flooring
2013-11-06
TC 223
ISO/DIS 22315
Societal security
*
Societal security — Mass evacuation — Guidelines for planning
2013-11-24
ISO/DIS 22397
*
Societal security — Guidelines for establishing partnering arrangements
2013-11-24
TC 228
ISO/DIS 17680
Tourism and related services
*
Thalassotherapy — Service requirements
2013-11-20
JTC 1
ISO/IEC DIS
33001
Information technology
*
Information technology — Process assessment — Concepts and terminology
2013-11-24
ISO/IEC DIS
33002
*
Information Technology — Process Assessment — Requirements for performing process assessment
2013-11-24
ISO/IEC DIS
33003
*
Information technology — Process assessment — Requirements for process measurement frameworks
2013-11-24
ISO/IEC DIS
33004
*
Information technology — Process assessment — Requirements for process reference, process assessment and maturity models
2013-11-24
ISO/IEC DIS
33020
*
Information technology — Process assessment — Process measurement framework for assessment of
process capability
2013-11-24
ISO/IEC DIS
30100-3
*
Information technology — Home network resource management — Part 3: Management applications
2013-11-14
ISO/IEC DIS
18014-4
*
Information technology — Security techniques — Time-stamping services — Part 4: Traceability of time
sources
2013-11-14
ISO/IEC
14496-4:2004/
DAmd 41
*
ISO/IEC DIS
29167-1
*
Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment
41: Conformance testing of MVC plus depth extension of AVC
2013-11-29
Information technology — Automatic identification and data capture techniques — Part 1: Security services for RFID air interfaces
2013-11-10
(Revision of ISO/IEC 29167-1:2012)
ISO/IEC DIS
29167-11
*
Information technology — Automatic identification and data capture techniques — Part 11: Air Interface
for security services crypto suite PRESENT-80
2013-11-10
FDIS circulated
Period from 01 August to 31 August 2013
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 6
ISO/FDIS 535
Paper, board and pulps
*
Paper and board — Determination of water absorptiveness — Cobb method
2013-11-23
(Revision of ISO 535:1991)
TC 21
ISO/FDIS
6182-1
Equipment for fire protection and fire fighting
*
Fire protection — Automatic sprinkler systems — Part 1: Requirements and test methods for sprinklers
2013-10-08
(Revision of ISO 6182-1:2004)
TC 23
ISO/FDIS
12934
Tractors and machinery for agriculture and forestry
*
Tractors and machinery for agriculture and forestry — Basic types — Vocabulary
2013-10-03
TC 28
ISO/FDIS 8311
Petroleum products and lubricants
*
Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Calibration of membrane
tanks and independent prismatic tanks in ships — Manual and internal electro-optical distance-ranging
methods
2013-10-09
(Revision of ISO 8311:1989)
TC 38
ISO/FDIS 2076
Textiles
*
Textiles — Man-made fibres — Generic names
(Revision of ISO 2076:2010)
ISO/FDIS
13934-2
*
Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method
2013-11-30
(Revision of ISO 13934-2:1999)
TC 41
ISO/FDIS
11749
Pulleys and belts (including veebelts)
*
Belt drive — V-ribbed belts for the automotive industry — Fatigue test
2013-10-27
(Revision of ISO 11749:1995, ISO 11749:1995/Cor 1:2003)
TC 44
Welding and allied processes
ISO
9539:2010/FD
Amd 1
*
ISO/FDIS
*
Gas welding equipment — Materials for equipment used in gas welding, cutting and allied processes —
Amendment 1
2013-10-09
Gas welding equipment — Marking for equipment used for gas welding, cutting and allied processes
10225
2013-10-03
TC 54
ISO/FDIS 9235
Essential oils
*
Aromatic natural raw materials — Vocabulary
2013-10-16
(Revision of ISO 9235:1997)
TC 58
ISO/FDIS
10462
Gas cylinders
*
Gas cylinders — Acetylene cylinders — Periodic inspection and maintenance
2013-10-23
(Revision of ISO 10462:2005)
TC 61
ISO/FDIS 306
Plastics
*
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
(Revision of ISO 306:2004)
ISO/FDIS
29221
*
Plastics — Determination of mode I plane-strain crack-arrest toughness
2013-10-16
ISO/FDIS
15791-1
*
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General
guidance
2013-10-30
(Revision of ISO 15791-1:2002)
TC 67
ISO/FDIS
11960
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries
*
Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells
2013-11-30
(Revision of ISO 11960:2011)
TC 94
ISO/FDIS
17491-5
Personal safety -- Protective clothing and equipment
*
Protective clothing - Test methods for clothing providing protection against chemicals — Part 5: Determination
of resistance to penetration by a spray of liquid (manikin spray test)
2013-10-07
(Revision of ISO 17491:2002)
TC 106
ISO/FDIS
17304
Dentistry
*
TC 121
ISO/FDIS
27427
Dentistry — Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials
Anaesthetic and respiratory equipment
*
Anaesthetic and respiratory equipment — Nebulizing systems and components
2013-10-24
(Revision of ISO 27427:2010)
TC 130
ISO/FDIS
12647-1
Graphic technology
*
Graphic technology — Process control for the production of half-tone colour separations, proof and production
prints — Part 1: Parameters and measurement methods
2013-10-20
(Revision of ISO 12647-1:2004)
ISO/FDIS
12647-2
*
Graphic technology — Process control for the production of half-tone colour separations, proof and production
prints — Part 2: Offset lithographic processes
2013-10-20
(Revision of ISO 12647-2:2004, ISO 12647-2:2004/Amd 1:2007)
ISO/FDIS
12647-3
*
Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithography on newsprint
2013-10-20
(Revision of ISO 12647-3:2005)
Graphic technology — Communication of graphic paper properties
ISO/FDIS
15397
2013-10-30
TC 135
ISO/FDIS 5579
Non-destructive testing
*
Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic
rules
2013-10-16
(Revision of ISO 5579:1998)
TC 150
ISO/FDIS
15309
Implants for surgery
*
Implants for surgery — Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and
compounds for use in implantable medical devices
2013-10-21
TC 164
ISO/FDIS
14577-1
Mechanical testing of metals
*
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test
method
2013-10-16
(Revision of ISO 14577-1:2002)
ISO/FDIS
14577-2
*
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
2013-10-16
(Revision of ISO 14577-2:2002)
ISO/FDIS
14577-3
*
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
2013-10-16
(Revision of ISO 14577-3:2002)
TC 201
Surface chemical analysis
ISO/FDIS
18115-1
*
Surface chemical analysis — Vocabulary — Part 1: General terms and terms used in spectroscopy
2013-10-07
(Revision of ISO 18115-1:2010, ISO 18115-1:2010/DAmd 1)
ISO/FDIS
18115-2
*
Surface chemical analysis — Vocabulary — Part 2: Terms used in scanning-probe microscopy
2013-10-07
(Revision of ISO 18115-2:2010, ISO 18115-2:2010/DAmd 1)
TC 202
ISO/FDIS
15932
Microbeam analysis
*
Microbeam analysis — Analytical electron microscopy — Vocabulary
2013-10-23
TC 211
ISO/FDIS
19157
Geographic information/Geomatics
*
Geographic information — Data quality
2013-10-09
(Revision of ISO 19113:2002, ISO 19114:2003, ISO/TS 19138:2006)
TC 213
ISO/FDIS
10360-8
Dimensional and geometrical product specifications and verification
*
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring
systems (CMM) — Part 8: CMMs with optical distance sensors
2013-10-16
IULTCS
ISO/FDIS
11646
International Union of Leather Technologists and Chemists Societies
*
Leather — Measurement of area
2013-10-16
(Revision of ISO 11646:1993)
JTC 1
Information technology
ISO/IEC/IEEE
8802-11:2012/
FDAmd 1
*
ISO/IEC/IEEE
8802-11:2012/
FDAmd 2
*
ISO/IEC/IEEE
8802-11:2012/
FDAmd 3
*
ISO/IEC FDIS
9594-1
*
Information technology — Telecommunications and information exchange between systems — Local and
metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC)
and physical layer (PHY) specifications — Amendment 1: Prioritization of management frames (adoption of
IEEE Std 802-11ae-2012)
Information technology — Telecommunications and information exchange between systems — Local and
metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC)
and physical layer (PHY) specifications — Amendment 2: MAC enhancements for robust audio video
streaming (adoption of IEEE Std 802.11aa-2012)
Information technology — Telecommunications and information exchange between systems — Local and
metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC)
and physical layer (PHY) specifications — Amendment 3: Enhancements for very high throughput in the 60
GHz band (adoption of IEEE Std 802.11ad-2012)
2014-01-29
2014-01-29
2014-01-29
Information technology — Open Systems Interconnection — The Directory — Part 1: Overview of concepts,
models and services
2013-10-23
(Revision of ISO/IEC 9594-1:2008, ISO/IEC 9594-1:2008/DAmd 2, ISO/IEC 9594-1:2008/DAmd 1, ISO/IEC
9594-1:2008/DAmd 3)
ISO/IEC FDIS
*
Information technology — Open Systems Interconnection — The Directory — Part 2: Models
9594-2
2013-10-23
(Revision of ISO/IEC 9594-2:2008, ISO/IEC 9594-2:2008/DAmd 2, ISO/IEC 9594-2:2008/DAmd 1, ISO/IEC
9594-2:2008/Cor 1:2011, ISO/IEC 9594-2:2008/DAmd 3, ISO/IEC 9594-2:2008/Cor 2:2012)
ISO/IEC FDIS
9594-3
*
Information technology — Open Systems Interconnection — The Directory — Part 3: Abstract service definition
2013-10-23
(Revision of ISO/IEC 9594-3:2008, ISO/IEC 9594-3:2008/DAmd 2, ISO/IEC 9594-3:2008/DAmd 1, ISO/IEC
9594-3:2008/Cor 1:2011, ISO/IEC 9594-3:2008/DAmd 3, ISO/IEC 9594-3:2008/Cor 2:2012)
ISO/IEC FDIS
9594-4
*
Information technology — Open Systems Interconnection — The Directory — Part 4: Procedures for distributed operation
2013-10-23
(Revision of ISO/IEC 9594-4:2008, ISO/IEC 9594-4:2008/DAmd 2, ISO/IEC 9594-4:2008/DAmd 1, ISO/IEC
9594-4:2008/Cor 1:2011)
ISO/IEC FDIS
9594-5
*
Information technology — Open Systems Interconnection — The Directory — Part 5: Protocol specifications
2013-10-23
(Revision of ISO/IEC 9594-5:2008, ISO/IEC 9594-5:2008/DAmd 2, ISO/IEC 9594-5:2008/DAmd 1, ISO/IEC
9594-5:2008/Cor 1:2011, ISO/IEC 9594-5:2008/Cor 2:2012)
ISO/IEC FDIS
9594-6
*
Information technology — Open Systems Interconnection — The Directory — Part 6: Selected attribute types
2013-10-23
(Revision of ISO/IEC 9594-6:2008, ISO/IEC 9594-6:2008/DAmd 2, ISO/IEC 9594-6:2008/DAmd 1, ISO/IEC
9594-6:2008/Cor 1:2011, ISO/IEC 9594-6:2008/DAmd 3, ISO/IEC 9594-6:2008/Cor 2:2012, ISO/IEC
9594-6:2008/Cor 3:2013)
ISO/IEC FDIS
9594-7
*
Information technology — Open Systems Interconnection — The Directory — Part 7: Selected object classes
2013-10-23
(Revision of ISO/IEC 9594-7:2008, ISO/IEC 9594-7:2008/DAmd 2, ISO/IEC 9594-7:2008/DAmd 1, ISO/IEC
9594-7:2008/DAmd 3, ISO/IEC 9594-7:2008/Cor 1:2012)
ISO/IEC FDIS
9594-8
*
Information technology — Open Systems Interconnection — The Directory — Part 8: Public-key and attribute
certificate frameworks
2013-10-23
(Revision of ISO/IEC 9594-8:2008, ISO/IEC 9594-8:2008/DAmd 2, ISO/IEC 9594-8:2008/DAmd 1, ISO/IEC
9594-8:2008/Cor 1:2011, ISO/IEC 9594-8:2008/DAmd 3, ISO/IEC 9594-8:2008/Cor 2:2012, ISO/IEC
9594-8:2008/Cor 3:2013)
ISO/IEC FDIS
9594-9
*
Information technology — Open Systems Interconnection — The Directory — Part 9: Replication
2013-10-23
(Revision of ISO/IEC 9594-9:2008, ISO/IEC 9594-9:2008/DAmd 2, ISO/IEC 9594-9:2008/DAmd 1, ISO/IEC
9594-9:2008/Cor 1:2011)
ISO/IEC FDIS
18025
*
Information technology — Environmental Data Coding Specification (EDCS)
2013-10-17
(Revision of ISO/IEC 18025:2005)
ISO/IEC FDIS
19775-1
*
Information technology — Computer graphics, image processing and environmental data representation —
Extensible 3D (X3D) — Part 1: Architecture and base components
2013-10-17
(Revision of ISO/IEC 19775-1:2008)
ISO/IEC FDIS
20009-2
*
Information technology — Security techniques — Anonymous entity authentication — Part 2: Mechanisms
based on signatures using a group public key
2013-10-23
ISO/IEC FDIS
27036-3
*
Information technology — Security techniques — Information security for supplier relationships — Part 3:
Guidelines for information and communication technology supply chain security
2013-10-06
ISO/IEC
19794-2:2011/
FDAmd 1
*
Information technology — Biometric data interchange formats — Part 2: Finger minutiae data — Amendment
1: Conformance testing methodology and clarification of defects
2013-10-29
Standards published
New International Standards published between 01 August and 31 August 2013
* Available in English only
** French version of standard previously published in English only
Price group
TC 4
Rolling bearings
ISO
1206:2001/Am
d 1:2013
Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimensions and
tolerances — Amendment 1: Tolerances for shaft raceway
ISO
10317:2008/A
md 1:2013
Rolling bearings — Tapered roller bearings — Designation system — Amendment 1: Design variant designation and comparison of tolerance class designations for single-row tapered roller bearings
TC 8
Ships and marine technology
ISO
18421:2013
XZ
XZ
*
C
TC 20
ISO
14186:2013
Ships and marine technology — Inland navigation vessels — Lifebuoy housings
Aircraft and space vehicles
*
Air cargo — Fire containment covers — Design, performance and testing requirements
M
TC 22
Road vehicles
ISO
19072-2:2013
*
ISO
13044-2:2013
*
Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 2:
Test methods and general performance requirements
K
Road vehicles — Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations
— Part 2: 50 mm fifth wheel couplings — Electrical and pneumatic interface
N
TC 23
Tractors and machinery for agriculture and forestry
ISO
5395-1:2013
Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests
T
ISO
5395-2:2013
Garden equipment — Safety requirements for
combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers
Q
ISO
5395-3:2013
Garden equipment — Safety requirements for
combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator
S
ISO
10517:2009/A
md 1:2013
Powered hand-held hedge trimmers — Safety — Amendment 1
TC 24
Particle characterization including sieving
XZ
ISO
20998-2:2013
*
ISO
3310-2:2013
*
Measurement and characterization of particles by acoustic methods — Part 2: Guidelines for linear theory
P
Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate
E
TC 28
Petroleum products and lubricants
ISO 4261:2013
Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications
TC 29
J
Small tools
ISO
3338-2:2013
*
ISO 8404:2013
*
Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
C
Tools for moulding — Angle pins
B
ISO 883:2013
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
G
ISO
7755-1:2013
Hardmetal burrs — Part 1: General specifications
ISO
7755-2:2013
Hardmetal burrs — Part 2: Cylindrical burrs (style A)
ISO
7755-3:2013
Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)
D
B
B
ISO
7755-4:2013
Hardmetal burrs — Part 4: Spherical burrs (style D)
ISO
7755-5:2013
Hardmetal burrs — Part 5: Oval burrs (style E)
ISO
7755-6:2013
Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)
ISO
7755-7:2013
Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)
ISO
7755-8:2013
Hardmetal burrs — Part 8: Flame burrs (style H)
ISO
7755-9:2013
Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)
ISO
7755-10:2013
Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)
ISO
7755-11:2013
Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)
ISO
7755-12:2013
Hardmetal burrs — Part 12: Inverted cone burrs (style N)
TC 33
Refractories
ISO
16334:2013
Monolithic refractory products — Determination of resistance to explosive spalling
TC 34
Food products
ISO 9622:2013
Milk and liquid milk products — Guidelines for the application of mid-infrared spectrometry
B
B
B
B
B
B
B
B
B
B
G
ISO
4833-1:2013
Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 1: Colony
count at 30 degrees C by the pour plate technique
E
ISO
4833-2:2013
Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 2: Colony
count at 30 degrees C by the surface plating technique
F
TC 35
Paints and varnishes
ISO
11997-2:2013
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt
fog)/dry/humidity/UV light
ISO
15528:2013
Paints, varnishes and raw materials for paints and varnishes — Sampling
TC 36
Cinematography
ISO 4241:2013
D
F
*
Cinematography — Projection leader (time-based), trailer and cue marks — Specifications
F
TC 44
Welding and allied processes
ISO
9692-1:2013
Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded
metal arc welding, gas welding, TIG welding and beam welding of steels
TC 45
Rubber and rubber products
ISO/TS
17796:2013
Rubber — Trapping and identification of volatile components of rubber fumes with active sampling on a
poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method
with mass spectrometric detection
ISO
17278:2013
*
G
Rubber, raw natural — Determination of the gel content of technically specified rubber (TSR)
D
Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet
underlay — Specification
ISO 5999:2013
TC 46
ISO 2789:2013
G
J
Information and documentation
*
Information and documentation — International library statistics
W
ISO
27729:2012/Co
r 1:2013
*
Information and documentation — International standard name identifier (ISNI) — Technical Corrigendum 1
free
TC 58
Gas cylinders
ISO 3807:2013
Gas cylinders — Acetylene cylinders — Basic requirements and type testing
N
ISO
12209:2013
*
Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air
J
TC 60
Gears
ISO
1328-1:2013
Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of
deviations relevant to flanks of gear teeth
TC 61
Plastics
ISO
4892-3:2013
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
ISO
4892-4:2013
H
*
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
E
TC 63
ISO
12821:2013
T
Glass containers
*
Glass packaging — 26 H 180 crown finish — Dimensions
C
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural
gas industries
ISO
12211:2012
Petroleum, petrochemical and natural gas industries — Spiral plate heat exchangers
R
ISO
12212:2012
Petroleum, petrochemical and natural gas industries — Hairpin-type heat exchangers
ISO
13705:2012
Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service
S
XC
TC 69
Applications of statistical methods
ISO
22514-2:2013
*
ISO
3951-1:2013
*
ISO
3951-2:2013
*
Statistical methods in process management — Capability and performance — Part 2: Process capability and
performance of time-dependent process models
L
Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by
acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
X
Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans
indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
X
TC 70
Internal combustion engines
ISO
4548-13:2013
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 13: Static burst
pressure test for composite filter housings
TC 92
Fire safety
ISO
29904:2013
Fire chemistry — Generation and measurement of aerosols
C
W
TC 93
ISO 5379:2013
ISO
10504:2013
Starch (including derivatives and by-products)
*
*
Starches and derived products — Determination of sulfur dioxide content — Acidimetric method and nephelometric method
E
Starch derivatives — Determination of the composition of glucose syrups, fructose syrups and hydrogenated
glucose syrups — Method using high-performance liquid chromatography
D
TC 94
Personal safety -- Protective clothing and equipment
ISO
12312-1:2013
Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use
TC 106
Dentistry
ISO
21563:2013
Dentistry — Hydrocolloid impression materials
TC 108
Mechanical vibration, shock and condition monitoring
ISO
21940-31:2013
ISO
20958:2013
L
S
*
Mechanical vibration — Rotor balancing — Part 31: Susceptibility and sensitivity of machines to unbalance
K
Condition monitoring and diagnostics of machine systems — Electrical signature analysis of three-phase
induction motors
M
TC 110
Industrial trucks
ISO
3691-1:2011/C
or 1:2013
Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than
driverless trucks, variable-reach trucks and burden-carrier trucks — Technical Corrigendum 1
ISO
3691-6:2013
Industrial trucks — Safety requirements and verification — Part 6: Burden and personnel carriers
free
M
TC 118
Compressors and pneumatic tools, machines and equipment
ISO
11011:2013
Compressed air — Energy efficiency — Assessment
TC 120
Leather
ISO 5433:2013
U
*
Leather — Bovine wet blue — Specification
C
TC 121
IEC
80601-2-30:20
09/Amd 1:2013
Anaesthetic and respiratory equipment
*
Medical electrical equipment — Part 2-30: Particular requirements for basic safety and essential performance
of automated non-invasive sphygmomanometers — Amendment 1
XZ
TC 122
Packaging
ISO
13274:2013
Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and
IBCs
ISO
16495:2013
Packaging — Transport packaging for dangerous goods — Test methods
TC 126
Tobacco and tobacco products
ISO
20774:2013
Cigarettes — Determination of carbon monoxide in sidestream smoke — Method using a routine analytical
linear smoking machine equipped with a fishtail chimney
TC 127
Earth-moving machinery
ISO 6747:2013
Earth-moving machinery — Dozers — Terminology and commercial specifications
N
U
L
P
TC 135
Non-destructive testing
ISO
16811:2012
Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
TC 147
Water quality
ISO
13164-1:2013
R
*
Water quality — Radon-222 — Part 1: General principles
M
ISO
13164-2:2013
Water quality — Radon-222 — Part 2: Test method using gamma-ray spectrometry
ISO
13164-3:2013
Water quality — Radon-222 — Part 3: Test method using emanometry
G
L
TC 153
Valves
ISO
10631:2013
Metallic butterfly valves for general purposes
TC 156
Corrosion of metals and alloys
ISO/TR
16335:2013
H
*
TC 164
ISO
20032:2013
Corrosion of metals and alloys — Corrosion tests in artificial atmospheres — Guidelines for selection of
accelerated corrosion test for product qualification
J
Mechanical testing of metals
*
Method for evaluation of tensile properties of metallic superplastic materials
F
TC 182
Geotechnics
ISO
14688-1:2002/
Amd 1:2013
*
ISO
14688-2:2004/
Amd 1:2013
*
Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and
description — Amendment 1
XZ
Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a
classification — Amendment 1
XZ
TC 188
Small craft
ISO
10088:2013
Small craft — Permanently installed fuel systems
TC 190
Soil quality
ISO
11916-1:2013
Soil quality — Determination of selected explosives and related compounds — Part 1: Method using
high-performance liquid chromatography (HPLC) with ultraviolet detection
H
M
Soil quality — Determination of selected explosives and related compounds — Part 2: Method using gas
chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS)
ISO
11916-2:2013
M
ISO/TS
16727:2013
*
ISO/TS
16965:2013
*
Soil quality — Determination of mercury — Cold vapour atomic fluorescence spectrometry (CVAFS)
C
Soil quality — Determination of trace elements using inductively coupled plasma mass spectrometry
(ICP-MS)
ISO
29200:2013
Soil quality — Assessment of genotoxic effects on higher plants — Vicia faba micronucleus test
TC 204
Intelligent transport systems
G
J
ISO/TS
15638-6:2013
*
ISO/TS
15638-8:2013
*
ISO/TS
*
Intelligent transport systems --- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 6: Regulated applications
S
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 8: Vehicle access monitoring (VAM)
T
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commer-
15638-11:2013
ISO/TS
15638-12:2013
*
ISO/TS
15638-14:2013
*
ISO/TS
15638-15:2013
*
ISO/TS
15638-16:2013
*
ISO/TS
15638-17:2013
*
ISO/TR
24014-2:2013
*
cial freight Vehicles (TARV) — Part 11: Driver work records (work and rest hours compliance) (DWR)
U
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 12: Vehicle mass monitoring (VMM)
U
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 14: Vehicle access control (VAC)
T
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 15: Vehicle location monitoring (VLM)
T
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 16: Vehicle speed monitoring (VSM)
U
Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 17: Consignment and location monitoring (CLM)
T
Public transport — Interoperable fare management system — Part 2: Business practices
M
TC 213
Dimensional and geometrical product specifications and verification
ISO
286-2:2010/Co
r 1:2013
Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables
of standard tolerance classes and limit deviations for holes and shafts — Technical Corrigendum 1
ISO
14253-1:2013
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring
equipment — Part 1: Decision rules for proving conformity or nonconformity with specifications
H
ISO/TS
15530-1:2013
Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 1: Overview and metrological characteristics
G
ISO
16610-85:2013
Geometrical product specifications (GPS) — Filtration — Part 85: Morphological areal filters: Segmentation
free
M
TC 226
ISO 2926:2013
Materials for the production of primary aluminium
*
TC 228
ISO/TR
21102:2013
Aluminium oxide used for the production of primary aluminium — Particle size analysis for the range 45 µm to
150 µm — Method using electroformed sieves
Tourism and related services
*
Adventure tourism — Leaders — Personnel competence
D
TMB
Technical Management Board
ISO/IEC Guide
98-4:2012
Uncertainty of measurement — Part 4: Role of measurement uncertainty in conformity assessment
JTC 1
Information technology
ISO/IEC
25064:2013
E
T
*
Systems and software engineering — Software product Quality Requirements and Evaluation (SQuaRE) —
Common Industry Format (CIF) for usability: User needs report
L
ISO/IEC
26550:2013
*
ISO/IEC/IEEE
29119-1:2013
*
ISO/IEC/IEEE
29119-2:2013
*
ISO/IEC/IEEE
29119-3:2013
*
Software and systems engineering — Reference model for product line engineering and management
Q
Software and systems engineering — Software testing — Part 1: Concepts and definitions
U
Software and systems engineering — Software testing — Part 2: Test processes
U
Software and systems engineering — Software testing — Part 3: Test documentation
XB
ISO/IEC TR
29154:2013
*
ISO/IEC
10373-3:2010/
Cor 1:2013
*
ISO/IEC
10373-6:2011/
Cor 1:2013
*
ISO/IEC/IEEE
9945:2009/Cor
1:2013
*
ISO/IEC
14496-5:2001/
Amd
24:2009/Cor
2:2013
*
ISO/IEC
14496-10:2012
/Cor 1:2013
*
ISO/IEC
14496-12:2012
/Cor 1:2013
*
ISO/IEC
14496-26:2010
/Cor 7:2013
*
ISO/IEC
14496-28:2012
/Cor 1:2013
*
ISO/IEC
23003-3:2012/
Cor 2:2013
*
ISO/IEC
23005-3:2013/
Cor 1:2013
*
Software engineering — Guide for the application of ISO/IEC 24773:2008 (Certification of software engineering professionals — Comparison framework)
G
Identification cards — Test methods — Part 3: Integrated circuit cards with contacts and related interface
devices — Technical Corrigendum 1
free
Identification cards — Test methods — Part 6: Proximity cards — Technical Corrigendum 1: R2 value range,
start of PICC transmission and program for EMD level measurement
free
Information technology — Portable Operating System Interface (POSIX®) Base Specifications, Issue 7 —
Technical Corrigendum 1
free
Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 24:
Reference software for AAC-ELD — Technical Corrigendum 2
free
Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Technical
Corrigendum 1
free
Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Technical
Corrigendum 1
free
Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Technical Corrigendum 7
free
Information technology — Coding of audio-visual objects — Part 28: Composite font representation —
Technical Corrigendum 1
free
Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Technical
Corrigendum 2
free
Information technology — Media context and control — Part 3: Sensory information — Technical Corrigendum 1
free
ISO/IEC
24730-62:2013
*
Information technology — Real time locating systems (RTLS) — Part 62: High rate pulse repetition frequency
Ultra Wide Band (UWB) air interface
Standards confirmed
The following International Standards are confimred for a five year period:
TC 2
Fasteners
ISO 8734:1997
(reconfirmed)
ISO 8735:1997
(reconfirmed)
ISO 23429:2004
(reconfirmed)
ISO 4757:1983
(reconfirmed)
TC 20
Aircraft and space vehicles
ISO 14961:2002
(reconfirmed)
ISO 15395:1998
(reconfirmed)
ISO 21961:2003
(reconfirmed)
ISO 21962:2003
(reconfirmed)
ISO 22645:2005
(reconfirmed)
ISO 14302:2002
(reconfirmed)
ISO 14303:2002
(reconfirmed)
ISO 14620-3:2005
(reconfirmed)
ISO 14711:2003
(reconfirmed)
ISO 14954:2005
(reconfirmed)
ISO 15387:2005
(reconfirmed)
ISO 15864:2004
(reconfirmed)
ISO 21351:2005
(reconfirmed)
TC 27
Solid mineral fuels
ISO 10086-2:2004
(reconfirmed)
ISO 15117-1:2004
(reconfirmed)
TC 28
Petroleum products and lubricants
ISO 1516:2002
(reconfirmed)
ISO 1523:2002
(reconfirmed)
ISO 2207:1980
(reconfirmed)
U
ISO 3013:1997
(reconfirmed)
ISO 3448:1992
(reconfirmed)
ISO/TR 3666:1998
(reconfirmed)
ISO 6297:1997
(reconfirmed)
ISO 6618:1997
(reconfirmed)
ISO 7537:1997
(reconfirmed)
ISO 7624:1997
(reconfirmed)
ISO 8973:1997
(reconfirmed)
ISO 9120:1997
(reconfirmed)
ISO 14935:1998
(reconfirmed)
ISO 15029-1:1999
(reconfirmed)
ISO 15167:1999
(reconfirmed)
ISO 20763:2004
ISO 10337:1997
(reconfirmed)
ISO 11223:2004
(reconfirmed)
TC 34
Food products
ISO/TS
16634-2:2009
ISO/TS
17996:2006
(reconfirmed)
TC 38
Textiles
ISO 4912:1981
(reconfirmed)
ISO 4913:1981
(reconfirmed)
ISO 8160:1987
(reconfirmed)
ISO 10132:1993
(reconfirmed)
TC 60
Gears
ISO 701:1998
(reconfirmed)
TC 61
Plastics
ISO 1060-1:1998
(reconfirmed)
ISO 1068:1975
(reconfirmed)
ISO 1628-2:1998
(reconfirmed)
ISO 1628-5:1998
(reconfirmed)
ISO 1875:1982
(reconfirmed)
ISO 2897-2:2003
(reconfirmed)
ISO 6186:1998
(reconfirmed)
ISO 8257-1:1998
(reconfirmed)
ISO 8985:1998
(reconfirmed)
ISO 10366-2:2003
(reconfirmed)
ISO 13000-1:2005
(reconfirmed)
ISO 13000-2:2005
(reconfirmed)
ISO 13741-1:1998
(reconfirmed)
ISO 13741-2:1998
(reconfirmed)
ISO 15023-2:2003
(reconfirmed)
ISO 16152:2005
(reconfirmed)
ISO 22498:2005
(reconfirmed)
ISO 1268-8:2004
(reconfirmed)
TC 96
Cranes
ISO 4304:1987
(reconfirmed)
TC 108
Mechanical vibration, shock and condition monitoring
ISO 1925:2001
ISO 1940-1:2003
TC 127
Earth-moving machinery
ISO 6015:2006
ISO 6016:2008
ISO 6484:1986
(reconfirmed)
ISO 7457:1997
(reconfirmed)
ISO 9248:1992
(reconfirmed)
ISO 9249:2007
ISO 10265:2008
ISO 10266:1992
(reconfirmed)
ISO 10567:2007
ISO 14397-1:2007
ISO 14397-2:2007
ISO 16754:2008
TC 159
Ergonomics
ISO 10075:1991
(reconfirmed)
TC 168
Prosthetics and orthotics
ISO 15032:2000
(reconfirmed)
TC 186
Cutlery and table and decorative metal hollow-ware
ISO 8442-1:1997
(reconfirmed)
ISO 8442-2:1997
(reconfirmed)
ISO 8442-3:1997
(reconfirmed)
ISO 8442-4:1997
(reconfirmed)
ISO 8442-5:2004
(reconfirmed)
ISO 8442-6:2000
(reconfirmed)
ISO 8442-7:2000
(reconfirmed)
ISO 8442-8:2000
(reconfirmed)
TC 194
Biological evaluation of medical devices
ISO
10993-14:2001
(reconfirmed)
ISO
10993-15:2000
(reconfirmed)
Standards withdrawn
Period from 01 August to 31 August 2013
TC 23
Tractors and machinery for agriculture and forestry
ISO 5395:1990
(replaced by ISO 5395-1:2013, ISO 5395-2:2013, ISO 5395-3:2013)
ISO
5395:1990/Amd
1:1992
(replaced by ISO 5395-1:2013, ISO 5395-2:2013, ISO 5395-3:2013)
TC 34
Food products
ISO 4833:2003
(replaced by ISO 4833-1:2013, ISO 4833-2:2013)
TC 58
Gas cylinders
ISO 3807-1:2000
(replaced by ISO 3807:2013)
ISO 3807-2:2000
(replaced by ISO 3807:2013)
ISO 12209-1:2000
(replaced by ISO 12209:2013)
ISO 12209-2:2000
(replaced by ISO 12209:2013)
ISO 12209-3:2000
(replaced by ISO 12209:2013)
TC 69
Applications of statistical methods
ISO 21747:2006
(replaced by ISO 22514-2:2013)
TC 106
Dentistry
ISO 1563:1990
(replaced by ISO 21563:2013)
ISO 1564:1995
(replaced by ISO 21563:2013)
ISO 13716:1999
(replaced by ISO 21563:2013)
TC 108
Mechanical vibration, shock and condition monitoring
ISO 10814:1996
(replaced by ISO 21940-31:2013)
TC 122
Packaging
ISO 16101:2004
(replaced by ISO 13274:2013)
ISO 16104:2003
(replaced by ISO 16495:2013)
ISO 16467:2003
(replaced by ISO 16495:2013)
ISO 23667:2007
(replaced by ISO 13274:2013)
Meeting calendar
(update at 01 August 2013)
Meetings called for the month of July are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
September 2013
1-4
Moscow (Russian Federation)
TC 20/SC 10
Aircraft and space vehicles/Aerospace fluid systems and components
3-6
Hangzhou (China)
TC 172/SC 5
Optics and photonics/Microscopes and endoscopes
4
Geneva (Switzerland)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
8-13
Suzhou (China)
TC 61
Plastics
9
Victoria (Canada)
TC 33
Refractories
9
Oslo (Norway)
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply
of gaseous fuels
9-10
Moscow (Russian Federation)
JTC 1/SC 36
Information technology/Information technology for learning, education and training
9-10
London (United
Kingdom)
TC 21/SC 8
Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas
9-10
Paris (France)
TC 26
Copper and copper alloys
9-11
London (United
Kingdom)
TC 21/SC 5
Equipment for fire protection and fire fighting/Fixed firefighting systems using water
9-11
Gaithersburg
(USA)
TC 172/SC 9
Optics and photonics/Electro-optical systems
9-13
Delft (Netherlands)
JTC 1/SC 34
Information technology/Document description and processing languages
9-13
Edmonton
(Canada)
TC 94/SC 14
Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
9-13
Montreal (Canada)
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration and
shock
9-13
Tallberg (Sweden)
TC 258
Project, programme and portfolio management
10
London (United
Kingdom)
TC 21/SC 6
Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems
using foam and powder
10
Suzhou (China)
TC 61/SC 1
Plastics/Terminology
10
Paris (France)
TC 79/SC 11
Light metals and their alloys/Titanium
10-13
Stockholm
(Sweden)
TC 205
Building environment design
11
London (United
Kingdom)
TC 21/SC 3
Equipment for fire protection and fire fighting/Fire detection and alarm systems
11
London (United
Kingdom)
TC 21/SC 11
Equipment for fire protection and fire fighting/Smoke and heat control systems and components
11
Suzhou (China)
TC 61/SC 2
Plastics/Mechanical properties
11
Suzhou (China)
TC 61/SC 5
Plastics/Physical-chemical properties
11
Suzhou (China)
TC 61/SC 10
Plastics/Cellular plastics
11
Suzhou (China)
TC 61/SC 11
Plastics/Products
11
Suzhou (China)
TC 61/SC 12
Plastics/Thermosetting materials
11
Paris (France)
TC 79/SC 5
Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
11
Stockholm
(Sweden)
TC 163/SC 2
Thermal performance and energy use in the built environment/Calculation methods
11
Stockholm
(Sweden)
TC 163/SC 3
Thermal performance and energy use in the built environment/Thermal insulation products
11-12
Stockholm
(Sweden)
TC 119/SC 3
Powder metallurgy/Sampling and testing methods for sintered metal materials (excluding hardmetals)
12
London (United
Kingdom)
TC 21/SC 2
Equipment for fire protection and fire fighting/Manually transportable fire extinguishers
12
Suzhou (China)
TC 61/SC 4
Plastics/Burning behaviour
12
Suzhou (China)
TC 61/SC 6
Plastics/Ageing, chemical and environmental resistance
12
Suzhou (China)
TC 61/SC 9
Plastics/Thermoplastic materials
12
Suzhou (China)
TC 61/SC 13
Plastics/Composites and reinforcement fibres
12
Paris (France)
TC 79/SC 2
Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
12
Paris (France)
TC 79/SC 6
Light metals and their alloys/Wrought aluminium and aluminium alloys
12
Stockholm
(Sweden)
TC 119/SC 2
Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals)
12
Stockholm
(Sweden)
TC 119/SC 4
Powder metallurgy/Sampling and testing methods for hardmetals
12
Vienna (Austria)
TC 146/SC 3
Air quality/Ambient atmospheres
12
Stockholm
(Sweden)
TC 163/SC 1
Thermal performance and energy use in the built environment/Test and measurement methods
12-13
Stockholm
(Sweden)
TC 163
Thermal performance and energy use in the built environment
13
London (United
Kingdom)
TC 21
Equipment for fire protection and fire fighting
13
Singapore (Sin-
TC 59/SC 17
Buildings and civil engineering works/Sustainability in buildings and civil engineering works
gapore)
13
Paris (France)
TC 79
Light metals and their alloys
13
Stockholm
(Sweden)
TC 119
Powder metallurgy
13
Stockholm
(Sweden)
TC 119/SC 5
Powder metallurgy/Specifications for powder metallurgical materials (excluding hardmetals)
13
Vienna (Austria)
TC 146/SC 5
Air quality/Meteorology
13
Vienna (Austria)
TC 146/SC 6
Air quality/Indoor air
13
Munich (Germany)
TC 244
Industrial furnaces and associated processing equipment
16-17
St. Petersburg
(Russian Federation)
DEVCO
Committee on developing countries matters
16-17
St. Petersburg
(Russian Federation)
TMB
Technical Management Board
16-20
Copenhagen
(Denmark)
TC 67/SC 7
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Offshore structures
16-20
London (United
Kingdom)
TC 150
Implants for surgery
16-20
Fukuoka (Japan)
TC 190
Soil quality
17
Fukuoka (Japan)
TC 190/SC 1
Soil quality/Evaluation of criteria, terminology and codification
17
Paris (France)
TC 254
Safety of amusement rides and amusement devices
17-18
Jiangyin (China)
TC 105
Steel wire ropes
17-18
Belo Horizonte
(Brazil)
TC 155
Nickel and nickel alloys
17-19
Tokyo (Japan)
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
17-19
Velsen (Netherlands)
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
17-19
Chengdu (China)
TC 256
Pigments, dyestuffs and extenders
18
St. Petersburg
(Russian Federation)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
18
Velsen (Netherlands)
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
18-19
Velsen (Netherlands)
TC 164/SC 2
Mechanical testing of metals/Ductility testing
18-20
St. Petersburg
(Russian Federation)
GA
General Assembly
18-20
Shanghai (China)
TC 232
Learning services outside formal education
19
Atlanta (USA)
TC 142
Cleaning equipment for air and other gases
19
Velsen (Netherlands)
TC 164/SC 3
Mechanical testing of metals/Hardness testing
19
Fukuoka (Japan)
TC 190/SC 4
Soil quality/Biological methods
19-20
Graz (Austria)
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
20
Brescia (Italy)
TC 22/SC 25
Road vehicles/Vehicles using gaseous fuels
20
Velsen (Netherlands)
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
20
Fukuoka (Japan)
TC 190/SC 2
Soil quality/Sampling
20
Fukuoka (Japan)
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
20
Fukuoka (Japan)
TC 190/SC 7
Soil quality/Soil and site assessment
21
St. Petersburg
(Russian Federation)
COUNCIL
Council
23
San Remo (Italy)
TC 8/SC 12
Ships and marine technology/Ships and marine technology - Large yachts
23-24
Paris (France)
PC 277
Sustainable purchasing
23-27
Kobe (Japan)
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
23-27
Milan (Italy)
TC 120
Leather
23-27
Milan (Italy)
TC 120/SC 1
Leather/Raw hides and skins, including pickled pelts
23-27
Milan (Italy)
TC 120/SC 2
Leather/Tanned leather
23-27
Milan (Italy)
TC 120/SC 3
Leather/Leather products
23-27
Vienna (Austria)
TC 218
Timber
23-27
Chicago (USA)
TC 262
Risk management
24-25
Beijing (China)
TC 265
Carbon dioxide capture, transportation, and geological storage
24-26
Gaithersburg
(USA)
TC 172/SC 1
Optics and photonics/Fundamental standards
25-26
Oslo (Norway)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
25-27
Tokyo (Japan)
TC 267
Facilities management
26
Freiburg (Germany)
TC 180/SC 1
Solar energy/Climate - Measurement and data
26
Freiburg (Germany)
TC 180/SC 4
Solar energy/Systems - Thermal performance, reliability and durability
26-27
Rotterdam
(Netherlands)
TC 260
Human resource management
26-27
Toulouse
(France)
TC 264
Fireworks
27
Seoul (Korea,
Republic of)
TC 44/SC 12
Welding and allied processes/Soldering materials
27
Bromont (Québec) (Canada)
TC 153/SC 1
Valves/Design, manufacture, marking and testing
27
Freiburg (Germany)
TC 180
Solar energy
27
Helsinki (Finland)
TC 213
Dimensional and geometrical product specifications and verification
29
Jeju (Korea,
Republic of)
TC 201/SC 6
Surface chemical analysis/Secondary ion mass spectrometry
September-October 2013
30-4
Kista (Stockholm) (Sweden)
JTC 1/SC 25
Information technology/Interconnection of information technology equipment
30-4
Stockholm
(Sweden)
PC 248
Project committee: Sustainability criteria for bioenergy
30-1
Tampere (Finland)
TC 23/SC 17
Tractors and machinery for agriculture and forestry/Manually portable forest machinery
30-2
Berlin (Germany)
TC 34/SC 15
Food products/Coffee
30-4
Stockholm
(Sweden)
TC 148
Sewing machines
October 2013
2-3
Tampere (Finland)
TC 23/SC 15
Tractors and machinery for agriculture and forestry/Machinery for forestry
2-3
St. John, Newfoundland (Canada)
TC 67/SC 8
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Arctic operations
3-4
Chantilly (USA)
TC 58/SC 2
Gas cylinders/Cylinder fittings
5
Incheon (Korea,
Republic of)
TC 106
Dentistry
6-11
Kobe (Japan)
TC 204
Intelligent transport systems
7
Berlin (Germany)
TC 10/SC 10
Technical product documentation/Process plant documentation
7
Istanbul (Turkey)
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
7-8
Milan (Italy)
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied processes
7-8
Sparks, Nevada
(USA)
TC 209
Cleanrooms and associated controlled environments
7-8
Stockholm
(Sweden)
TC 238
Solid biofuels
7-9
Tokyo (Japan)
TC 70
Internal combustion engines
7-9
Tokyo (Japan)
TC 70/SC 8
Internal combustion engines/Exhaust gas emission measurement
7-9
Istanbul (Turkey)
TC 126
Tobacco and tobacco products
7-10
Paris (France)
JPC 2
Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology
7-11
Beijing (China)
CASCO
Committee on conformity assessment
7-11
Cambridge,
Massachusetts
(USA)
TC 121/SC 4
Anaesthetic and respiratory equipment/Terminology and semantics
7-11
Oslo (Norway)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
7-11
Colorado Springs
(USA)
TC 247
Fraud countermeasures and controls
8
Istanbul (Turkey)
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
8
Boulder (USA)
TC 202/SC 1
Microbeam analysis/Terminology
8-9
Berlin (Germany)
TC 263
Coalbed methane (CBM)
8-10
Berlin (Germany)
TC 59/SC 8
Buildings and civil engineering works/Sealants
8-10
Boulder (USA)
TC 202
Microbeam analysis
9
Istanbul (Turkey)
TC 38/SC 23
Textiles/Fibres and yarns
9
Oslo (Norway)
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
supplies
9
Oslo (Norway)
TC 138/SC 6
Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for
all applications
9
Boulder (USA)
TC 202/SC 2
Microbeam analysis/Electron probe microanalysis
9
Boulder (USA)
TC 202/SC 3
Microbeam analysis/Analytical electron microscopy
9-10
Seogwipo-si
(Korea, Republic
of)
TC 159
Ergonomics
10
Lyon (France)
TC 22/SC 5
Road vehicles/Engine tests
10
Istanbul (Turkey)
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
10
Oslo (Norway)
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial
applications
10
Oslo (Norway)
TC 138/SC 5
Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and
valves of plastic materials and their accessories -- Test methods and basic specifications
10
Oslo (Norway)
TC 138/SC 7
Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials
10
Boulder (USA)
TC 202/SC 4
Microbeam analysis/Scanning electron microscopy (SEM)
11
Istanbul (Turkey)
TC 38
Textiles
11
Berlin (Germany)
TC 59/SC 13
Buildings and civil engineering works/Organization of information about construction works
11
Garching (Germany)
TC 60
Gears
11
Garching (Germany)
TC 60/SC 1
Gears/Nomenclature and wormgearing
11
Garching (Germany)
TC 60/SC 2
Gears/Gear capacity calculation
11
Venice (Italy)
TC 146/SC 2
Air quality/Workplace atmospheres
11
Jeju (Korea,
Republic of)
TC 159/SC 5
Ergonomics/Ergonomics of the physical environment
13-17
London (United
Kingdom)
TC 59/SC 15
Buildings and civil engineering works/Performance description of houses
14-15
Troy (USA)
TC 22/SC 11
Road vehicles/Safety glazing materials
14-15
Frankfurt (Germany)
TC 39/SC 10
Machine tools/Safety
14-15
Paris (France)
TC 44/SC 10
Welding and allied processes/Unification of requirements in the field of metal welding
14-15
Brussels (Belgium)
TC 122/SC 4
Packaging/Packaging and environment
14-17
Charlottenlund
(Denmark)
TC 46/SC 8
Information and documentation/Quality - Statistics and performance evaluation
14-17
Stuttgart (Germany)
TC 165
Timber structures
14-18
Paris (France)
PC 271
Compliance management systems
14-18
Seoul (Korea,
Republic of)
TC 108
Mechanical vibration, shock and condition monitoring
14-18
Sydney (Australia)
TC 157
Non-systemic contraceptives and STI barrier prophylactics
15
Halifax (Canada)
TC 31/SC 6
Tyres, rims and valves/Off-the-road tyres and rims
15
Paris (France)
TC 44/SC 5
Welding and allied processes/Testing and inspection of welds
15
Paris (France)
TC 44/SC 7
Welding and allied processes/Representation and terms
15-16
Paris (France)
TC 2/SC 7
Fasteners/Reference standards
15-18
Berlin (Germany)
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
16
Paris (France)
TC 2/SC 11
Fasteners/Fasteners with metric external thread
16
Halifax (Canada)
TC 31/SC 7
Tyres, rims and valves/Industrial tyres and rims
16
La Plaine
St-Denis
(France)
TC 44/SC 9
Welding and allied processes/Health and safety
16
Jeju (Korea,
Republic of)
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing
conditions
16
Jeju (Korea,
Republic of)
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
16-18
Munich (Germany)
TC 58/SC 3
Gas cylinders/Cylinder design
16-25
Beijing (China)
TC 184/SC 2
Automation systems and integration/Robots and robotic devices
17
Paris (France)
TC 2/SC 14
Fasteners/Surface coatings
17
Halifax (Canada)
TC 31/SC 5
Tyres, rims and valves/Agricultural tyres and rims
17
London (United
Kingdom)
TC 59/SC 3
Buildings and civil engineering works/Functional/user requirements and performance in building
construction
17
Jeju (Korea,
Republic of)
TC 123/SC 5
Plain bearings/Quality analysis and assurance
17
Jeju (Korea,
Republic of)
TC 123/SC 6
Plain bearings/Terms and common items
17
Milan (Italy)
TC 216
Footwear
17-18
Paris (France)
TC 44
Welding and allied processes
18
Paris (France)
TC 2
Fasteners
18
Paris (France)
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
18
Berlin (Germany)
TC 22/SC 7
Road vehicles/Injection equipment and filters for use on road vehicles
18
London (United
Kingdom)
TC 59/SC 2
Buildings and civil engineering works/Terminology and harmonization of languages
18
Jeju (Korea,
Republic of)
TC 123
Plain bearings
18
Jeju (Korea,
TC 123/SC 7
Plain bearings/Special types of plain bearings
Republic of)
19-20
Jacksonville
(USA)
TC 24/SC 4
Particle characterization including sieving/Particle characterization
21
Singapore (Singapore)
TC 8/SC 3
Ships and marine technology/Piping and machinery
21
Singapore (Singapore)
TC 8/SC 6
Ships and marine technology/Navigation and ship operations
21
Singapore (Singapore)
TC 8/SC 7
Ships and marine technology/Inland navigation vessels
21
Singapore (Singapore)
TC 8/SC 11
Ships and marine technology/Intermodal and Short Sea Shipping
21
Berlin (Germany)
TC 147/SC 1
Water quality/Terminology
21-25
London (United
Kingdom)
PC 283
Occupational health and safety management systems - Requirements
21-25
Singapore (Singapore)
TC 8
Ships and marine technology
21-25
Huddersfield
(United Kingdom)
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
21-25
Berlin (Germany)
TC 154
Processes, data elements and documents in commerce, industry and administration
21-25
Sao Paulo (Brazil)
TC 181
Safety of toys
21-25
Sydney (Australia)
TC 215
Health informatics
22-24
Stockholm
(Sweden)
TC 20/SC 9
Aircraft and space vehicles/Air cargo and ground equipment
23
Paris (France)
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
23
Berlin (Germany)
TC 22/SC 9
Road vehicles/Vehicle dynamics and road-holding ability
23
London (United
Kingdom)
TC 25
Cast irons and pig irons
23
Courbevoie,
Paris (France)
TC 111
Round steel link chains, chain slings, components and accessories
23
Berlin (Germany)
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
23
Berlin (Germany)
TC 173/SC 7
Assistive products for persons with disability/Accessible design
23
Tokyo (Japan)
TC 206
Fine ceramics
24
Paris (France)
TC 17/SC 7
Steel/Methods of testing (other than mechanical tests and chemical analysis)
24
Vienna (Austria)
TC 83
Sports and other recreational facilities and equipment
24
Berlin (Germany)
TC 147/SC 5
Water quality/Biological methods
24
Berlin (Germany)
TC 147/SC 6
Water quality/Sampling (general methods)
24-25
Sarajevo (Bosnia
and Herzegovina)
TC 34/SC 12
Food products/Sensory analysis
24-25
Berlin (Germany)
TC 173
Assistive products for persons with disability
25
Vienna (Austria)
TC 22/SC 22
Road vehicles/Motorcycles
25
Vienna (Austria)
TC 22/SC 23
Road vehicles/Mopeds
25
Boston (USA)
TC 92/SC 4
Fire safety/Fire safety engineering
25
Tokyo (Japan)
TC 146/SC 1
Air quality/Stationary source emissions
25
Berlin (Germany)
TC 147/SC 2
Water quality/Physical, chemical and biochemical methods
25
Berlin (Germany)
TC 147/SC 4
Water quality/Microbiological methods
26
Berlin (Germany)
TC 147
Water quality
28
Karlsruhe (Germany)
TC 117
Fans
28-29
Düsseldorf
(Germany)
TC 17/SC 4
Steel/Heat treatable and alloy steels
28-31
Bali (Indonesia)
TC 45/SC 1
Rubber and rubber products/Hoses (rubber and plastics)
29
Kochi (India)
TC 234
Fisheries and aquaculture
30
Prague (Czech
Republic)
TC 266
Biomimetics
31
Bali (Indonesia)
TC 45/SC 2
Rubber and rubber products/Testing and analysis
31
Bali (Indonesia)
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
and drainage (including land drainage)
October-December 2013
7-11
Oslo (Norway)
October-November 2013
28-1
Bali (Indonesia)
TC 45
Rubber and rubber products
28-1
Cambridge,
Massachusetts
(USA)
TC 121/SC 2
Anaesthetic and respiratory equipment/Airways and related equipment
28-2
Berlin (Germany)
TC 130
Graphic technology
November 2013
1
Bali (Indonesia)
TC 45/SC 3
Rubber and rubber products/Raw materials (including latex) for use in the rubber industry
2-9
Porto (Portugal)
TC 176
Quality management and quality assurance
2-9
Porto (Portugal)
TC 176/SC 1
Quality management and quality assurance/Concepts and terminology
2-9
Porto (Portugal)
TC 176/SC 3
Quality management and quality assurance/Supporting technologies
3-8
Gyeongju (Korea, Republic of)
TC 184/SC 4
Automation systems and integration/Industrial data
4-8
Sydney (Australia)
TC 34/SC 17
Food products/Management systems for food safety
4-8
Porto (Portugal)
TC 176/SC 2
Quality management and quality assurance/Quality systems
4-8
Bangkok (Thailand)
TC 217
Cosmetics
4-8
Nairobi (Kenya)
TC 285
Clean cookstoves and clean cooking solutions
4-9
Perros-Guirec
(France)
JTC 1
Information technology
6-8
Paris (France)
TC 275
Sludge recovery, recycling, treatment and disposal
7
Vienna (Austria)
TC 83/SC 4
Sports and other recreational facilities and equipment/Snowsports equipment
7
Okinawa (Japan)
TC 201/SC 1
Surface chemical analysis/Terminology
7
Okinawa (Japan)
TC 201/SC 2
Surface chemical analysis/General procedures
7
Okinawa (Japan)
TC 201/SC 9
Surface chemical analysis/Scanning probe microscopy
7-9
Okinawa (Japan)
TC 201
Surface chemical analysis
8
Delft (Netherlands)
TC 92/SC 1
Fire safety/Fire initiation and growth
8
Shenzen (China)
TC 160
Glass in building
8
Shenzen (China)
TC 160/SC 1
Glass in building/Product considerations
8
Shenzen (China)
TC 160/SC 2
Glass in building/Use considerations
8
Okinawa (Japan)
TC 201/SC 3
Surface chemical analysis/Data management and treatment
8
Okinawa (Japan)
TC 201/SC 4
Surface chemical analysis/Depth profiling
8
Okinawa (Japan)
TC 201/SC 7
Surface chemical analysis/Electron spectroscopies
8
Washington, D.C
(USA)
TC 227
Springs
9
Okinawa (Japan)
TC 201/SC 8
Surface chemical analysis/Glow discharge spectroscopy
11
Mexico City
(Mexico)
TC 113/SC 1
Hydrometry/Velocity area methods
11-15
Mexico City
(Mexico)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
11-15
Tokyo (Japan)
TC 98
Bases for design of structures
11-15
Mexico City
(Mexico)
TC 113
Hydrometry
12-13
Guangzhou
(China)
TC 137
Footwear sizing designations and marking systems
13
Tokyo (Japan)
TC 110/SC 1
Industrial trucks/General terminology
13
Mexico City
(Mexico)
TC 113/SC 2
Hydrometry/Flow measurement structures
14
Tokyo (Japan)
TC 110/SC 2
Industrial trucks/Safety of powered industrial trucks
14
Mexico City
(Mexico)
TC 113/SC 5
Hydrometry/Instruments, equipment and data management
14
Mexico City
(Mexico)
TC 113/SC 6
Hydrometry/Sediment transport
14-15
Redlands (USA)
TC 211
Geographic information/Geomatics
15
Tokyo (Japan)
TC 110
Industrial trucks
15
Mexico City
(Mexico)
TC 113/SC 8
Hydrometry/Ground water
15
Belo Horizonte
(Brazil)
TC 229
Nanotechnologies
18
Berlin (Germany)
TC 20/SC 4
Aircraft and space vehicles/Aerospace fastener systems
*
18
Mumbay (India)
TC 135/SC 8
Non-destructive testing/Infrared thermography for non-destructive testing
18-20
Berlin (Germany)
TC 20
Aircraft and space vehicles
18-21
Exton (USA)
TC 84
Devices for administration of medicinal products and intravascular catheters
19-20
Tokyo (Japan)
TC 31/SC 9
Tyres, rims and valves/Valves for tube and tubeless tyres
19-21
Singapore (Singapore)
TC 212
Clinical laboratory testing and in vitro diagnostic test systems
20-22
Tokyo (Japan)
TC 269
Railway applications
27
Milan (Italy)
TC 221
Geosynthetics
30
Miami (USA)
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
**
TC 41
Pulleys and belts (including veebelts)
Berlin (Germany)
*
*
December 2013
1-5
Tel Aviv (Israel)
**
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
4-5
La Plaine
St-Denis
(France)
*
TC 279
Innovation process: interaction, tools and methods
5
Brussels (Belgium)
TC 94/SC 3
Personal safety -- Protective clothing and equipment/Foot protection
5-6
Paris (France)
TC 197
Hydrogen technologies
9-11
Geneva (Switzerland)
PC 284
Management System for Quality of Private Security Company (PSC) Operations - Requirements
with Guidance
11
Frankfurt (Germany)
TC 270
Plastics and rubber machines
11-12
Kyoto (Japan)
TC 281
Fine Bubble Technology
12-13
New York (USA)
TC 171/SC 2
Document management applications/Application issues
12-13
Berlin (Germany)
*
TC 276
Biotechnology
16-20
Winterthur
(Switzerland)
**
TC 121/SC 3
Anaesthetic and respiratory equipment/Lung ventilators and related equipment
**
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied processes personnel
*
TC 69/SC 4
Applications of statistical methods/Applications of statistical methods in process management
TC 17/SC 3
Steel/Steels for structural purposes
*
TC 71
Concrete, reinforced concrete and pre-stressed concrete
*
Month unknown 2013
Bratislava (Slovakia)
January 2014
13-16
New Delhi (India)
23
Paris (France)
28-31
Sydney (Australia)
February 2014
10-11
Paris (France)
*
TC 44/SC 3
Welding and allied processes/Welding consumables
10-14
Paris (France)
**
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
(South America)
**
JTC 1/SC 35
Information technology/User interfaces
(Sweden)
**
TC 213
Dimensional and geometrical product specifications and verification
March 2014
11-14
London (United
Kingdom)
TC 118
Compressors and pneumatic tools, machines and equipment
11-14
London (United
Kingdom)
*
TC 118/SC 3
Compressors and pneumatic tools, machines and equipment/Pneumatic tools and machines
11-14
London (United
Kingdom)
*
TC 118/SC 6
Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air
systems
13
London (United
Kingdom)
*
TC 118/SC 1
Compressors and pneumatic tools, machines and equipment/Process compressors
13
London (United
Kingdom)
*
TC 118/SC 4
Compressors and pneumatic tools, machines and equipment/Compressed air purity specification
and compressed air treatment equipment
23-27
Warsaw (Poland)
*
TC 107
Metallic and other inorganic coatings
23-27
Warsaw (Poland)
*
TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
23-27
Warsaw (Poland)
*
TC 107/SC 4
Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
23-27
Warsaw (Poland)
*
TC 107/SC 7
Metallic and other inorganic coatings/Corrosion tests
23-27
Warsaw (Poland)
*
TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion coatings
27-28
Geneva (Switzerland)
*
COUNCIL
Council
(Europe)
**
TC 134
Fertilizers and soil conditioners
**
PC 271
Compliance management systems
**
TC 257
General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions
March-April 2014
31-4
Vienna (Austria)
1st Quarter 2014
(Netherlands)
April 2014
7-11
Delft (Netherlands)
*
TC 6
Paper, board and pulps
7-11
Delft (Netherlands)
*
TC 6/SC 2
Paper, board and pulps/Test methods and quality specifications for paper and board
7-11
Lund (Sweden)
*
TC 92
Fire safety
7-11
Vitoria (Brazil)
*
TC 102
Iron ore and direct reduced iron
7-11
Vitoria (Brazil)
*
TC 102/SC 1
Iron ore and direct reduced iron/Sampling
7-11
Vitoria (Brazil)
*
TC 102/SC 2
Iron ore and direct reduced iron/Chemical analysis
7-11
Vitoria (Brazil)
*
TC 102/SC 3
Iron ore and direct reduced iron/Physical testing
7-11
Bologna (Italy)
*
TC 110/SC 4
Industrial trucks/Rough-terrain trucks
7-11
Amsterdam
(Netherlands)
*
TC 161
Control and protective devices for gas and/or oil burners and appliances
8-9
(Japan)
**
TC 199
Safety of machinery
8-10
(Brazil)
**
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
9-11
Jeju (Korea,
Republic of)
*
TC 112
Vacuum technology
14-15
Hong Kong
(Hong Kong,
China)
*
JTC 1/SC 27
Information technology/IT Security techniques
23-24
(Europe)
**
TC 167
Steel and aluminium structures
24-25
Bangkok (Thailand)
**
TC 34
Food products
Berlin (Germany)
**
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed meals
Berlin (Germany)
**
TC 34/SC 11
Food products/Animal and vegetable fats and oils
May 2014
5-9
Washington, D.C
(USA)
*
TC 46
Information and documentation
5-9
Washington, D.C
(USA)
*
TC 46/SC 9
Information and documentation/Identification and description
5-9
Washington, D.C
(USA)
*
TC 46/SC 11
Information and documentation/Archives/records management
5-10
St. Petersburg,
Florida (USA)
*
TC 96
Cranes
8
Santa María de
Lamas (Portugal)
**
TC 87
Cork
8
Wiesbaden
(Germany)
*
TC 226
Materials for the production of primary aluminium
9-16
London (United
Kingdom)
*
TC 10
Technical product documentation
9-16
London (United
Kingdom)
*
TC 10/SC 1
Technical product documentation/Basic conventions
9-16
London (United
Kingdom)
*
TC 10/SC 6
Technical product documentation/Mechanical engineering documentation
12-16
Milan (Italy)
**
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
12-16
London (United
Kingdom)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
12-16
Zhangjiajie
(China)
**
TC 195
Building construction machinery and equipment
12-16
Zhangjiajie
(China)
**
TC 195/SC 1
Building construction machinery and equipment/Machinery and equipment for concrete work
14-16
Rosslyn (USA)
**
TC 145
Graphical symbols
14-16
Rosslyn (USA)
**
TC 145/SC 1
Graphical symbols/Public information symbols
14-16
Rosslyn (USA)
**
TC 145/SC 2
Graphical symbols/Safety identification, signs, shapes, symbols and colours
14-16
Rosslyn (USA)
**
TC 145/SC 3
Graphical symbols/Graphical symbols for use on equipment
15
London (United
Kingdom)
TC 68
Financial services
15-20
Berlin (Germany)
*
TC 34/SC 5
Food products/Milk and milk products
19-23
Berlin (Germany)
**
TC 43
Acoustics
19-23
Berlin (Germany)
**
TC 43/SC 1
Acoustics/Noise
19-23
Berlin (Germany)
**
TC 43/SC 2
Acoustics/Building acoustics
19-24
Karuizawa (Japan)
**
TC 215
Health informatics
20-21
Prague (Czech
Republic)
*
TC 122
Packaging
21-22
(USA)
**
TC 22/SC 3
Road vehicles/Electrical and electronic equipment
23
Toronto (Canada)
*
TC 268
Sustainable development in communities
23-24
Beijing (China)
**
TC 24/SC 4
Particle characterization including sieving/Particle characterization
26-29
Kyoto (Japan)
*
TC 249
Traditional chinese medicine
27-30
(USA)
**
TC 156
Corrosion of metals and alloys
June 2014
1-6
(Sweden)
**
TC 127
Earth-moving machinery
5-6
Berlin (Germany)
*
TC 211
Geographic information/Geomatics
9-14
Moscow (Russian Federation)
*
TC 85/SC 2
Nuclear energy, nuclear technologies, and radiological protection/Radiological protection
16-20
Incheon (Korea,
Republic of)
*
TC 121
Anaesthetic and respiratory equipment
17-18
Stockholm
(Sweden)
*
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
17-18
Berlin (Germany)
*
TC 220
Cryogenic vessels
23-27
London (United
Kingdom)
*
TC 193
Natural gas
Düsseldorf
(Germany)
**
TC 17/SC 17
Steel/Steel wire rod and wire products
London (United
Kingdom)
**
TC 193/SC 1
Natural gas/Analysis of natural gas
*
REMCO
Committee on reference materials
July 2014
8-11
Boulder (USA)
September 2014
8-9
Madrid (Spain)
*
JTC 1/SC 22
Information technology/Programming languages, their environments and system software interfaces
8-12
Paris (France)
**
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of
machine systems
10-12
Rio de Janeiro
(Brazil)
*
GA
General Assembly
13
Rio de Janeiro
(Brazil)
*
COUNCIL
Council
18-19
Manchester
(United Kingdom)
**
TC 24/SC 4
Particle characterization including sieving/Particle characterization
20
Manchester
(United Kingdom)
**
TC 281
Fine Bubble Technology
22-26
Durban (South
Africa)
**
TC 146
Air quality
22-26
Durban (South
Africa)
**
TC 146/SC 1
Air quality/Stationary source emissions
24-25
Geneva (Switzerland)
*
CASCO
Committee on conformity assessment
Stockholm
(Sweden)
**
TC 17/SC 11
Steel/Steel castings
(USA)
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
Milan (Italy)
**
TC 39/SC 4
Machine tools/Woodworking machines
Seattle (USA)
**
TC 89
Wood-based panels
Montreal (Canada)
**
TC 213
Dimensional and geometrical product specifications and verification
**
TC 48
Laboratory equipment
**
TC 17/SC 9
Steel/Tinplate and blackplate
**
TC 215
Health informatics
TC 149/SC 1
Cycles/Cycles and major sub-assemblies
3rd Quarter 2014
London (United
Kingdom)
2nd-3rd Quarter 2014
Ljimuden (Netherlands)
October 2014
5-10
Berlin (Germany)
20-24
Nunspeet (Netherlands)
20-24
Berlin (Germany)
*
TC 190
Soil quality
20-24
Berlin (Germany)
*
TC 190/SC 1
Soil quality/Evaluation of criteria, terminology and codification
20-24
Berlin (Germany)
*
TC 190/SC 2
Soil quality/Sampling
20-24
Berlin (Germany)
*
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
20-24
Berlin (Germany)
*
TC 190/SC 4
Soil quality/Biological methods
20-24
Berlin (Germany)
*
TC 190/SC 5
Soil quality/Physical methods
20-24
Berlin (Germany)
*
TC 190/SC 7
Soil quality/Soil and site assessment
23-24
(South Africa)
**
TC 178
Lifts, escalators and moving walks
Miami (USA)
**
TC 44/SC 3
Welding and allied processes/Welding consumables
Toronto (Canada)
**
TC 59
Buildings and civil engineering works
Prague (Czech
Republic)
**
TC 135
Non-destructive testing
**
TC 45
Rubber and rubber products
**
TC 34/SC 4
Food products/Cereals and pulses
**
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
(Australia)
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
(Brazil)
**
TC 28
Petroleum products and lubricants
Beijing (China)
**
TC 36
Cinematography
(Germany)
**
TC 37
Terminology and other language and content resources
November 2014
3-7
Cape Town
(South Africa)
4th Quarter 2014
(Portugal)
2nd Semester 2014
Madrid (Spain)
Month unknown 2014
(Japan)
**
TC 44
Welding and allied processes
Nairobi (Kenya)
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
(United Kingdom)
**
TC 142
Cleaning equipment for air and other gases
Suzhou (China)
**
TC 164
Mechanical testing of metals
London (United
Kingdom)
*
TC 213
Dimensional and geometrical product specifications and verification
St. Petersburg,
Florida (USA)
**
TC 115
Pumps
Foshan (China)
**
TC 107
Metallic and other inorganic coatings
Foshan (China)
**
TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
Foshan (China)
**
TC 107/SC 4
Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
Foshan (China)
**
TC 107/SC 7
Metallic and other inorganic coatings/Corrosion tests
Foshan (China)
**
TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion coatings
(France)
**
TC 29
Small tools
(France)
**
TC 29/SC 9
Small tools/Tools with cutting edges made of hard cutting materials
Tienjin (China)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
(Europe)
**
TC 215
Health informatics
**
TC 4
Rolling bearings
**
TC 46
Information and documentation
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
*
TC 213
Dimensional and geometrical product specifications and verification
**
TC 215
Health informatics
**
JTC 1
Information technology
(South Africa)
**
REMCO
Committee on reference materials
(Switzerland)
**
TC 17/SC 17
Steel/Steel wire rod and wire products
February 2015
3-13
1st Quarter 2015
April 2015
May 2015
18-22
London (United
Kingdom)
June 2015
Beijing (China)
2nd Quarter 2015
(China)
September 2015
14-25
Berlin (Germany)
3rd Quarter 2015
Sao Paulo (Brazil)
November 2015
(China)
Month unknown 2015
(Finland)
**
TC 44
Welding and allied processes
(France)
**
TC 45
Rubber and rubber products
(Russian Federation)
**
TC 96
Cranes
Berlin (Germany)
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
(Japan)
**
TC 142
Cleaning equipment for air and other gases
(China)
**
TC 155
Nickel and nickel alloys
(United Kingdom)
**
TC 164
Mechanical testing of metals
(Austria)
**
TC 190
Soil quality
**
TC 213
Dimensional and geometrical product specifications and verification
Seoul (Korea,
Republic of)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
(Australia)
**
TC 178
Lifts, escalators and moving walks
**
JTC 1
Information technology
(Russian Federation)
**
REMCO
Committee on reference materials
(Australia)
**
TC 44
Welding and allied processes
February 2016
(USA)
April 2016
November 2016
(Norway)
Month unknown 2016