SYLABUS
DRILLING ENGINEERING.
Details of syllabus – 3rd Semester Drilling – subject –Theory-01 Exploratory Drilling
1. Surface Exploratory Drilling
2. Methods of Exploratory Drilling
3. Drilling Practice
Theory-02
Origin, Nature and Geological classification of rock surface process causing Rock
disintegration, elements of Mineralogy, Elements of Structural Geology.
Theory-03.
Drilling machinery-diamond Drilling Rig, vibration in diamond drilling, derrick, core barrel,
core bit, casing, Fishing.
Theory-04
Sub-Mine survey, Topic-Measurement of distance, compass survey, Leveling, controlling,
calculation of Ore reserves. Theodolite survey.
Practical –I Geology-I Practical-Topical Identification of Ore minerals, Industrial minerals,
Rock forming minerals, in land specimen.
1. Determination of specific gravity of small specimen by Jolly’s balance.
Drilling machinery Practical –
1.
2.
3.
4.
5.
Study of drilling accessories, instruments and retting.
Study of different fishing tools.
Study of different mallines different units of rigs by disassembling and assembling.
Practicing the starting of Diesel Engine, Petrol Engine and running electric motors.
Study of different tyres of water pumps, different units of reciprocating pump, centril
turbine, mono PUMPS subric sible PUMP etc. by aisassembling and assembling.
6. Operational technique and maintenance of rig, Duplex Triplex and simplex pump site.
7. Practicing the operation of rig site.
Mine survey Practical :
1. Introduction, chain survey, compass survey, Levels, Theodolite.
Practical Training Report and Viva :
1. Training Report
2. Viva Report
Technical Seminar .
THEORY :
4TH SEMESTER :
1. Drilling Safety and Environmental management : Health hazards, from rock drilling,
safety aspects, Safety precautions in diamond drilling, Rig safety rules under safety
rules for the use of equipment, safety precautions in oil well drilling Environmental
pollution and Control.
2. Engg. Geology – II : Startiography, fossil Fuels, Detrollum, Economic Geology,
Sampling.
3. Basic Mechanical Engineering – Strength of materials, Air compressions, Diesel
Engine, Theory of machines, Power transmission, governors and Flywheel.
4. Blast hole drilling : Introduction, space, Purpose of drilling and Historical development,
BHD by rock drill, Rotary BHD, Rock machines.
5. Drilling Sketching :
1. Study and Sketching lay out of diamond drilling rig site, working units, including
parts and accessories.
2. Study and Sketching of the following.
3. Study and sketching of the rock drills.
4. Study and Sketching Feed mechanism.
PRACTICAL :
1. Engg. Geology :
1. Identifications of sedimentary, metamorphic rocks in hand specimen.
2. Determination of specie quantity of large specimen by walkers steel yard bal.
Mechanical Engineering Lab: Materials distinguish, Theory of inauine Lab. Engg.
Mechanics.
Practical training report & viva : Training Report, viva.
Technical Seminar:
5th Semester Drilling :
1. Exploratory Drilling –II
a. Oil & natural gas exploration drilling
b. Ground water Exploration drilling.
c. Foundation exploration and foundation drilling.
d. Bore hole surveying.
e. Directional drilling
f. OFF shore drilling.
2. Engg. Geology :
a. Geology of soils
b. Prospecting and exploration.
c. Engg. Geology
d. Ground water Engg.
3. Drilling Machinery-II
a. Oil well drilling machinery
b. Control mechanisms
c. Circulating pump
d. Fishing
e. Drilling Machinery economic.
4. Mud and Cement Tech. :
a. Functions and properties of circulating fluid.
b. Mud Chemistry
c. Cementation
d. Storage maintains
PRACTICAL
1. Engg. Geology – III
a. Interpretation of structural maps.
b. Geological interpretation of bore hole area.
2. Machinery –II
a. Practicing starting of Engines.
b. Practicing scheduled maintaince of Engines.
c. Practicing of operation of rig or drilling.
d. Practicing hoisting and lowering of drill starting.
e. Practicing recovery of core.
f. Analyzing core by spitting with core splitter.
g. Maintaince of rig and circulating pumps.
3. Mud and Cement Tech. :
a. Study S sketching of simplex, duplex and triplex reciprocating pump and
centrifugal pump.
b. Study and sketching of apparatus for measurement of specific quality, visibility, gel
rileration loss. Sand content and P.H. value.
c. Study and sketching of the cementing units, cement mines from cut section.
4. Practical training report and viva :
a. Training report
b. Viva
5. Technical Seminar :
6th semester :
1. Hydraulics and Hydraulics’ Machines :
1. Properties of fluids
2. Bernoulli’s Equation and its application
3. Flow through orifice and notches
4. Flow through pipes
5. Impact of jet
6. Miscellaneous Hydraulics devices.
2. Advance drilling technology :
1. Standards of Drill strings.
2. Advance rock drilling Techniques and Application.
3. Advance exploration drilling techniques.
3. Under ground drilling :
1. Under ground blast hole drilling for coal.
2. Under ground BHD for metal mines.
3. Underground drilling for mines safety.
4. Planning of underground drilling.
4.Enterpreneurship & Mine Management :
1. Entrepreneurship.
2. Mineral concession rules.
3. Entrepreneurship Management.
4. Financial Management.
5. Marketing management
6. State meaning and objective of Man power Management
7. Management Technology
8. State main principles and advantages of scientific Management.
9. discuss the meaning of the term management by objectives its necessity and
advance.
10. Device Motivation.
11. State basic concept, produce dure and advantages of work study, time study and
motive study.
12. Wages
13. State basic concept of incentives
14. State meaning of industrial psychology working contagion and about environment.
15. discuss about environment trade unions and their functions.
16. state main provisions of industrial dispute act-1956.
5. Tube-well drilling (Elective):
a. Occurance of ground water.
b. Drilling techniques
c. Screening water wells
d. Well development
e. Testing of Water Wells.
Oil Well Drilling (Elective) :
1.
2.
3.
4.
5.
Legal Matters
Well Planning
Exploratory drilling camp
Coring and core analysis
Rock characteristics
6. Evaluation of Oil Well
7. Economics.
PRACTICAL-1 : Hydraulics and Hydraulics machines (Sessional)
1.
2.
3.
4.
5.
6.
7.
8.
Study of various preassure gauges.
Verification of Bernoulli’s theorem by Bernoulli’s verification
Determination of discharge through ventuimeter.
Find out orifice co-efficient by orifice tank set up.
Determination of head loss due to friction for different pipes by pipe flow.
Study of hydraulic Ram.
Study of hydraulic accumulator.
Study of hydraulic lift.
PRACTICAL-2 : Drilling Technical (Sessional)
1. Types of casings
2. Five jet drill
3. Elective heater drill
4. Oder drilling
5. Submersible rigs
6. Maricore drill
7. Off soure platforms
8. DTH motor drill
9. Reverse circulation system
10.
Con-cor coring operation.
3.PROJECT Training report and viva
1. Project report
2. Viva
4.PROJECT SEMINAR :