List of accredited methods
No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Field of
testing
Lubricants,
oils and
similar
products
1. SRPS ISO
6743-99
Types of testsing
Range
Standard Test Method for Kinematic
Viscosity of Transparent and Opaque
Liquids (the Calculation of Dynamic
Viscosity)
Standard Practice for Calculating
Viscosity Index From Kinematic
Viscosity at 40 and 100°C
Standard Test Method for LowTemperature Viscosity of Lubricants
Measured by Brookfield Viscometer
Standard Test Method for Density,
Relative Density (Specific Gravity), or
API Gravity of Crude Petroleum and
Liquid Petroleum Products by
Hydrometer Method
Standard Test Method for Pour Point of
Petroleum Products
Standard Test Method for Measuring
Apparent Viscosity at High-Temperature
and High-Shear Rate by Multicell
Capillary Viscometer
Standard Test Method for Foaming
Characteristics of Lubricating Oils
Standard Test Method for Destilation of
Petroleum Products at Atmospheric
Pressure
Standard Test Method for ASTM Color
of Petroleum Products (ASTM Color
Scale)
Standard Test Method for Water in
Petroleum Products and Bituminous
Materials by Distillation
Standard Test Methods for Flash-Point
by Pensky-Martens Closed Cup Tester
Standard Test Method for Flash and Fire
Points by Cleveland Open Cup Tester
Flash point by Abel-Penskom
Standard Test Method for Apparent
Viscosity of Engine Oils Between -5 and
-35oC Using the Cold-Cranking
Simulator
Standard Test Method for
Shear Stability of Polymer Containing
Fluids Using a
European Diesel Injector Apparatus at
30 and 90 Cycles
Standard Test Method for
Shear Stability of Polymer Containing
Fluids Using a
European Diesel Injector
Standard Test Method for Evaporation
Loss of Lubricating Oils by the Noack
Method
0.2 - 300 000 m2/s
Metods
SRPS ISO 3104:2003
ASTM D 445:2012
SRPS ISO 2909:2007
ASTM D 2270:2004
500 - 1 000 000 mPas
from + 5 0С to - 40 0С
700 – 1300 kg/m3
0 – 69 0С
Viscosity 2 - 5mPas
on 150 0С
ASTM D 2983:2009
SRPS EN ISO 3675:2007
ASTM D 1298:1999
(reap.2005)
SRPS ISO 3061:1997
ASTM D 97:2012
ASTM D 5481:2004
ASTM D 892:2011а
ASTM D 86:2009
0 - 8 ASTM color
ASTM D 1500:2007
0 - 25 %
ASTM D 95:2005e1
40 0С – 360 0С
SRPS EN ISO 2719:2008
ASTM D 93:2012
79 0С – 400 0С
0 0С – 65 0С
ASTM D 92:2012
SRPS B.H8.047:2012
500 to 25 000 mPas
ASTM D 5293:2009
ASTM D 7109:2004
(CEC-L14-78)
ISO 20844:2004
Тест А :with Woodov
metals
DIN 51581:2011-09
ASTM D 5800:2008
1
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
Standard Test Method for Water
Separability of Petroleum Oils and
Synthetic Fluids
Standard Test Method for coding level of
contamination of solid particles
Standard Test Method for Shear
Stability of Polymer Containing Fluids
Using a European Diesel Injector
Apparatus
Standard Practice for Calculation of
Permanent Shear Stability Index
Standard Test Method for Pentane
Insolubles by Membrane Filtration
Standard Test Method for Conradson
Carbon Residue of Petroleum Products
Standard Test Method for Base Number
of Petroleum Products by Potentiometric
Perchloric Acid Titration
Standard Test Method for Acid Number
of Petroleum Products by Potentiometric
Titration
Standard Test Method for Acid and
Base Number by Color-Indicator
Titration
Standard Test Methods for
Saponification Number of Petroleum
Products
Standard Test Method for Determination
of Water in Petroleum Products,
Lubricating Oils, by Karl Fisher reagents
Standard Test Method for Determination
of Water in Petroleum Products,
Lubricating Oils, and Additives by
Coulometric Karl Fisher Titration
Standard Test Methods for Aniline Point
and Mixed Aniline Point of Petroleum
Products and Hydrocarbon Solvents
Standard Test Method for Sulfated Ash
from Lubricating Oils and Additives
Standard Test Method for Ash from
Petroleum Products
Standard Test Methods for Elemental
Analysis of Lubricant and Additive
Components—Barium, Calcium,
Phosphorus, Sulfur, and Zinc by
Wavelength-Dispersive X-Ray
Fluorescence Spectroscopy
Standard Test Methods for Elemental
Analysis of Lubricant and Additive
Components— Calcium, Chlorine,
Coper, Magnesium, Phosphorus, Sulfur,
and Zinc by Wavelength-Dispersive XRay Fluorescence Spectroscopy
Standard Test Method for Sulfur in
Petroleum Products by Wavelength
Dispersive X-ray Fluorescence
Spectrometry
SRPS ISO 6614:2003
ASTM D 1401:2012
6 / 14 µ
SRPS ISO 4406:2005
ASTM D 6278:2007
(CEC L-14-78)
ASTM D 6022:2006
ASTM D 4055:2004
ASTM D 189:2006e2
≤300 mg KOH / g
Up to 150 mg KOH/g
SRPS ISO 3771:1999
ASTM D 2896:2007а
SRPS ISO 6619:1994
ASTM D 664:2009
Up to 250 mg KOH/g
SRPS ISO 6618:2004
ASTM D 974:2008
Up to 400 mg KOH/g
DIN 51559 T - 1 : 1978
ASTM D 94:2007
50 - 1000 ppm
ASTM D 1744:1992
10 - 25.000 mg/kg
ASTM D 6304:2007
ASTM D 611:2007
0.005-0.02 mass %
0.001 - 0.180 mass %
SRPS ISO 3987:1996
ASTM D 874:2007
ASTM D 482:2007
Ba 0,04 - 1 mas.%
Ca 0,01 - 0,8 mas %
P 0,01 - 0,5 mas %
Zn 0,01 - 0,5 mas %
S 0,1 - 1,5 mas %
ASTM D 4927:2002
Ca 0,01 - 0,2 mas %
Cl 0,001 - 0,2 mas %
Cu 0,001 - 0,05 mas %
Mg 0,003 - 0,2 mas %
P 0,001 - 0,25 mas %
S 0,03 - 1 mas %
Zn 0,001 - 0,25 mas %
ASTM D 6443:2004
S 0,002 - 5 mas %
ASTM D 2622:2008
2
36.
37.
38.
39.
40.
41.
42.
43.
No.
44.
Field of
testing
Engine
Coolant Antifreeze
45.
47.
48.
49.
50.
Standard Test Method for Percent Ash
Content of Engine Coolants and
Antirusts
Standard Test Method for Corrosion
Test for Engine Coolants in Glassware
Standard Test Methods for Water in
Engine Coolant Concentrate by the Karl
Fischer Reagent Method
51.
52.
54.
Standard Test Method for Freezing
Point of Aqueous Engine Coolants
Standard Test Method for Foaming
Tendencies of Engine Coolants in
Glassware
Standard Test Method for Boiling Point
of Engine Coolants
Standard Test Method for Density or
Relative Density of Engine Coolant
Concentrates and Engine Coolants By
The Hydrometer
Standard Test Method for Reserve
Alkalinity of Engine Coolants and
Antirusts
Standard Test Method for pH of Engine
Coolants and Antirusts
46.
No.
53.
Standard Test Method for Oxidation
Stability of Steam Turbine Oils by
Rotating Pressure Vessel
Determination of Oxidation Stabilty of
Straight Mineral Oil
Standard Test Method for RustPreventing Characteristics of Inhibited
Mineral Oil in the Presence of Water
Standard Test Method for Detection of
Copper Corrosion from Petroleum
Products by the Copper Strip Tarnish
Test
Standard Test Method for Rust
Protection by Metal Preservatives in the
Humidity Cabinet
Standard Test Method for determination
of aromatic hydrocarbons in transformer
oil by infrared spectroscopy
Standard Test Method for Measurement
of Extreme-Pressure Properties of
Lubricating Fluids (Four-Ball Method
Standard Test Method for Wear
Preventive Characteristics of Lubricating
Fluid (Four-Ball Method)
Types of testsing
Field of
testing
Brake fluid
Types of testsing
Standard Test Method for Boiling Point
of brake fluid
Standard Test Methods for
Determination of wet equilibrium boiling
point of brake fluid
30 - 1000 min
ASTM D 2272:2009
IP 306:1979
Klass 1 до 4
SRPS ISO 7120:1994
ASTM D 665:2006
SRPS EN ISO 2160: 2011
ASTM D 130:2004
SRPS ISO 9227:2010
ASTM D
1748:2002(reap.2008)
IEC 60590 :1978
Max. 500kgf
490 dN
Range
0 0С – 60 0C
100 0C – 200 0C
1,000 - 1,1300 g/cm3
ASTM D
2783:2003(reap.2009)
ASTM D 4172:1994
(reap.2004)
Metods
SRPS H.Z8.053:1984
ASTM D 1177:1994
(1998)e1
SRPS H.Z8.057:1984
ASTM D 1881:1997
(reap.2009)
SRPS H.Z8.058:1984
ASTM D 1120:2011e1
ASTM D 1122:2013
SRPS H.Z8.059:1984
ASTM D 1121:2011
0-14 рН
0,1 - 100 %
Range
SRPS H.Z8.052:1984
ASTM D 1287:1991
(2002)
SRPS H.Z8.055:1984
ASTM D 1119:2005
(reap.2009)
SRPS H-Z8.056:2007
ASTM D 1384:2005
ASTM D 1123:1999
(reap.2009)
Metods
SRPS H.Z8.062:1986
SRPS H.Z8.063:1986
3
55.
Standard Test Method for Determination
of fluidity at low temperatures of brake
fluid
Standard Test Method for determination
of stability at high temperature of brake
fluid
Standard Test Method for pH of brake
fluid
Standard Test Method for determination
of corrosion in the presence of brake
fluid
56.
57.
58.
No.
59.
60.
61.
62.
63.
64.
Field of
testing
Greases
SRPS H.Z8.068:1986
SRPS H.Z8.065:1986
0-14 рН
SRPS H.Z8.067:1986
Types of testsing
Standard Test Method for Dropping
Point of Lubricating Grease
Range
< 220 0C
Klass 1 до 4
Standard Test Method for Detection of
Copper Corrosion from Lubricating
Grease
Standard Test Methods for Cone
Penetration of Lubricating Grease
Standard Test Method for Roll Stability
of Lubricating Grease
Standard Test Method for Wear
Preventive Characteristics of Lubricating
Grease (Four-Ball Method)
Standard Test Method for Measurement
of Extreme-Pressure Properties of
Lubricating Grease (Four-Ball Method )
SRPS H.Z8.064:1986
85 - 475 unit
NGLI 1 - 2
Metods
SRPS ISO 2176:2011
ASTM D
566:2002(reap.2009)
ASTM D
4048:2002(reap.2008)
SRPS ISO 2137:1997
ASTM D 217:02
(reap.2007)
ASTM D 1831:2000
(reap.2006)
ASTM D 2266:2001
(reap.2008)
Max. 500kgf (490dN)
ASTM D2596:2010
B.2. Accreditation for sampling
No.
65.
Field of sampling
Liquid Petroleum
Products
Types of sampling
Standard Practice for Manual Sampling of
Petroleum and Petroleum Products
Types of testsing
SRPS EN ISO 3170 : 2008
Belgrade, The 30th of July 2013.
Created by:
Laboratory Manager: Karmila Bošković, B.S. of chemistry
Laboratory Manager Deputy: Vera Tomić, B.S of chemistry
4