ISO Update
Supplement to ISOfocus
November 2014
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step
towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO
technical committee. When consensus has been reached within the technical committee, the document is sent to the
Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 %
of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International
Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 October to 31 October 2014
These documents are currently under consideration in the technical committee.
They have been registered at the Central Secretariat.
PC 278
Anti-bribery management systems
ISO/CD 37001
Anti-bribery management systems
TC 22
Road vehicles
ISO/CD 29061-3
Road vehicles — Methods and criteria for usability evaluation of child restraint systems
and their interface with vehicle anchorage systems — Part 3: Installation of child restraint
systems using vehicle seat belts
ISO/CD 29061-4
Road vehicles — Methods and criteria for usability evaluation of child restraint systems
and their interface with vehicle anchorage systems — Part 4: Securing of child in child
restraint system and daily handling aspects
ISO/CD 29061-5
Road vehicles — Methods and criteria for usability evaluation of child restraint systems
and their interface with vehicle anchorage systems — Part 5: Installation and securing of
child in a booster seat
TC 23
Tractors and machinery for agriculture and forestry
ISO/DTR 15155-1
Agricultural irrigation equipment — Test facilities for agricultural irrigation equipment —
Part 1: Test facilities for agricultural irrigation equipment
TC 24
Particle characterization including sieving
ISO/CD 22412
Particle size analysis — Dynamic light scattering (DLS)
TC 27
Solid mineral fuels
ISO/CD 7404-1
Methods for the petrographic analysis of bituminous coal and anthracite — Part 1:
Vocabulary
TC 37
Terminology and other language and content resources
ISO/CD 24624
Language resource management — Transcription of spoken language
TC 42
Photography
ISO/CD 19567
Photography — Digital cameras — Texture reproduction measurements
TC 44
Welding and allied processes
ISO/CD 14343
Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding
of stainless and heat resisting steels — Classification
ISO/CD 18276
Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded
metal arc welding of high-strength steels — Classification
TC 54
Essential oils
ISO/CD 13171
Essential oils — Oil of origanum (Origanum vulgare ssp. hirtum.)
TC 61
Plastics
ISO/CD TS 15791-2
Plastics — Development and use of intermediate-scale fire tests for products — Part 2:
ISO/CD 16396-2
Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of
test specimens and determination of properties
ISO/CD 19927
Fibre-reinforced plastic composites — Determination of interlaminar strength and modulus
by double beamshear test
TC 83
Sports and other recreational facilities and equipment
ISO/CD 10256-1
Head and face protection for use in ice hockey — Part 1: General requirements
ISO/CD 10256-2
Head and face protection for use in ice hockey — Part 2: Skaters — Performance
requirements
ISO/CD 10256-3
Head and face protection for use in ice hockey — Part 3: Skaters — Performance
requirements
ISO/CD 10256-4
Head and face protection for use in ice hockey — Part 4: Goalkeepers — Performance
requirements
ISO/CD 10256-5
Head and face protection for use in ice hockey — Part 5: Neck laceration protectors for
ice hockey player
TC 85
Nuclear energy, nuclear technologies, and radiological
protection
ISO/CD 18417
Iodine charcoal sorbents for nuclear facilities — Method for defining sorption capacity
index
TC 92
Fire safety
ISO/CD 19021
Prescriptive test method for determination of smoke gases emitted by fire of materials and
products used in transportation
TC 94
Personal safety -- Protective clothing and equipment
ISO/CD 18889
Protective gloves for pesticide operators — Performance requirements
ISO/CD 19918
Protective clothing — Protection against liquid chemicals — Measurement of cumulative
permeation of chemicals with low vapour pressure through protective clothing and glove
materials
ISO/DTS 16976-1
Respiratory protective devices — Human factors — Part 1: Metabolic rates and
respiratory flow rates
TC 106
Dentistry
ISO/CD 7787-1
Dental rotary instruments — Cutters — Part 1: Steel laboratory cutters
ISO/CD 9873
Dental hand instruments — Reusable mirrors and handles
ISO/CD 14457
Dentistry — Handpieces and motors
ISO/CD 19715
Dentistry — Filling instruments with contra set
TC 108
Mechanical vibration, shock and condition monitoring
ISO/CD 2017-3
Mechanical vibration and shock — Resilient mounting systems — -- Part 3: Technical
information to be exchanged for application of vibration isolation to new buildings
TC 118
Compressors and pneumatic tools, machines and
equipment
ISO 1217:2009/CD
Amd 1
Displacement compressors — Acceptance tests — Amendment 1: Calculation of
isentropic efficiency and relationship with specific energy
TC 121
Anaesthetic and respiratory equipment
ISO/CD 9170-1
Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with
compressed medical gases and vacuum
TC 126
Tobacco and tobacco products
ISO/CD 19290
Cigarettes — Determination of tobacco specific nitrosamines in mainstream cigarette
smoke — Method using LC-MS/MS
TC 130
Graphic technology
ISO/DTR 19300
Graphic technology — Guidelines for the use of standards for print media production
TC 164
Mechanical testing of metals
ISO/CD 9649
Metallic materials — Wire — Reverse torsion test
TC 170
Surgical instruments
ISO/CD 7153-1
Surgical instruments — Materials — Part 1: Metals
TC 190
Soil quality
ISO/CD 18400-104
Soil quality — Sampling — Part 104: Strategies and statistical evaluations
ISO/CD 18400-202
Soil quality — Sampling — Part 202: Preliminary investigations
ISO/CD 18400-203
Soil quality — Sampling — Part 203: Investigation of potentially contaminated sites
ISO/CD 18400-204
Soil quality — Sampling — Part 204: Guidance on sampling of soil gas
TC 204
Intelligent transport systems
ISO/CD 13111-1
Intelligent transport systems — The use of personal ITS station to support ITS service
provision for travellers — Part 1: General information and use cases definition
TC 205
Building environment design
ISO/CD 18566-1
Building environment design — Design, test methods and control of hydronic radiant
heating and cooling panel systems — Part 1: Definition, symbols, technical specifications
and requirements
ISO/CD 18566-2
Building environment design — Design, test methods and control of hydronic radiant
heating and cooling panel systems — Part 2: Determination of heating and cooling
capacity of ceiling mounted radiant panels
ISO/CD 18566-3
Building environment design — Design, test methods and control of hydronic radiant
heating and cooling panel systems — Part 3: Design of ceiling mounted radiant panels
TC 206
Fine ceramics
ISO/CD 17562
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear
thermal expansion of monolithic ceramics by push-rod technique
TC 207
Environmental management
ISO 14024:1999/CD
Amd 1
Environmental labels and declarations — Type I environmental labelling — Principles and
procedures — Amendment 1
ISO/DTS 14027
Environmental labels and declarations — Type III environmental declarations — Product
Category Rule (PCR) development
TC 215
Health informatics
ISO/DTS 16843-1
Health Informatics — Categorial structures for representation of acupuncture — Part 1:
Acupuncture points
ISO/DTS 16843-2
Health Informatics — Categorial structures for representation of acupuncture — Part 2:
Needling
ISO/CD 25237
Health informatics — Pseudonymisation
TC 219
Floor coverings
ISO/CD 10582
Resilient floor coverings — Specification for heterogeneous vinyl flooring to include luxury
vinyl tile requirements
TC 227
Springs
ISO/CD 19690-1
Disc springs — Part 1: Calculation
ISO/CD 19690-2
Disc springs — Part 2: Technical specifications
TC 249
Traditional chinese medicine
ISO/CD 18746
Traditional Chinese Medicine — Intradermal acupuncture needles
TC 262
Risk management
ISO/CD Guide 73
Risk management — Vocabulary
ISO/CD 31000
Risk management — Principles and guidelines
TC 265
Carbon dioxide capture, transportation, and geological
storage
ISO/CD 27913
Carbon dioxide capture, transportation and geological storage — Pipeline transportation
systems
ISO/CD 27917
Capture, transport and geological storage of CO2 — Vocabulary
TMBG
Technical Management Board - groups
ISO/IEC CD Guide 983
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in
measurement (GUM:1995)
JTC 1
Information technology
ISO/IEC
10646:2014/PDAM 2
Information technology — Universal Coded Character Set (UCS) — Amendment 2:
Bhaiksuki, Marchen, Tangut, Zanabazar Square, and other characters
ISO/IEC CD 7811-9
Identification cards — Recording technique — Part 9: Tactile identifier mark
ISO/IEC CD 29003
Information technology — Security techniques — Identity proofing
ISO/IEC 230019:2014/PDAM 1
Information technology — MPEG systems technologies — Part 9: Common encryption of
MPEG-2 transport streams — Amendment 1: Support of Sparse Encryption
ISO/IEC CD 18047-6
Information technology — Radio frequency identification device conformance test
methods — Part 6: Test methods for air interface communications at 860 MHz to 960
MHz
ISO/IEC CD 30113-11
Information technology — Gesture-based interfaces across devices and methods — Part
11: Single-point gesture for common system actions
DIS circulated
Period from 01 October to 31 October 2014
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote
terminates
TC 4
Rolling bearings
ISO/DIS 3245.2
Rolling bearings — Needle roller bearings, drawn cup without inner ring —
Geometrical product specifications (GPS), boundary dimensions and
tolerances
2014-12-16
(Revision of ISO 3245:2007)
TC 6
ISO/DIS 302
Paper, board and pulps
*
Pulps — Determination of Kappa number
2015-01-23
(Revision of ISO 302:2004)
ISO/DIS 11476
*
Paper and board — Determination of CIE whiteness, C/2° (indoor illumination
conditions)
(Revision of ISO 11476:2010)
TC 8
ISO/DIS 29404
Ships and marine technology
*
Ships and marine technology — Specific requirements for offshore wind farm
2015-01-23
components — Supply chain information flow
Ships and marine technology — Guidelines for the assessment of speed and
power performance by analysis of speed trial data
ISO/DIS 15016.2
2014-12-07
(Revision of ISO 15016:2002)
TC 10
ISO/DIS 13715
Technical product documentation
*
Technical product documentation — Edges of undefined shape — Indication
and dimensioning
2015-01-16
(Revision of ISO 13715:2000)
TC 17
ISO/DIS 5003
Steel
*
Vignole railway rails 43 kg/m and above
2015-01-09
(Revision of ISO 5003:1980)
TC 20
ISO/DIS 8575
Aircraft and space vehicles
*
Aerospace — Fluid systems — Hydraulic system tubing
(Revision of ISO 8575:1990)
ISO/DIS 20105
*
Space data and information transfer systems — Operation of CFDP over
encapsulation service
2015-01-07
ISO/DIS 20106
*
Space data and information transfer systems — Mission operations common
object model
2015-01-07
ISO/DIS 20107
*
Space data and information transfer systems — Spacecraft onboard interface
services — Device virtualization service
2015-01-07
ISO/DIS 20205
*
Space data and information transfer systems — Spacecraft Onboard
Interface Systems — Low Data-Rate Wireless Communications for
Spacecraft Monitoring and Control
2015-01-28
ISO/DIS 20206
*
Space data and information transfer systems — IP over CCSDS space links
2015-01-28
ISO/DIS 20207
*
Space data and information transfer systems — CCSDS Space Link
Protocols over ETSI DVB-S2 Standard
2015-01-28
ISO/DIS 20208
*
Space data and information transfer systems — Delta-DOR Raw Data
Exchange Format
2015-01-28
ISO/DIS 20210
*
Space data and information transfer systems — Mission Operations Message
Abstraction Layer - JAVA API
2015-01-28
ISO/DIS 20211
*
Space data and information transfer systems — Spacecraft Onboard
Interface Services — Device Access Service
2015-01-28
ISO/DIS 20213
*
Space data and information transfer systems — Spacecraft onboard interface
services — Message transfer service
2015-01-28
ISO/DIS 20214
*
Space data and information transfer systems — Security architecture for
space data systems
2015-01-28
ISO/DIS 20215
*
Space data and information transfer systems — CCSDS cryptographic
algorithms
2015-01-28
ISO/DIS 20216
*
Space data and information transfer systems — Spacecraft onboard interface
2015-01-28
services — Device data pooling service
ISO/DIS 20217
*
TC 21
ISO/DIS 16852
Space data and information transfer systems — Spacecraft onboard interface
services — File and packet store services
2015-01-28
Equipment for fire protection and fire fighting
*
Flame arresters — Performance requirements, test methods and limits for
use
2015-03-24
(Revision of ISO 16852:2008, ISO 16852:2008/Cor 1:2008, ISO
16852:2008/Cor 2:2009)
TC 22
Road vehicles
ISO/DIS 10924-5
*
Road vehicles — Circuit breakers — Part 5: Circuit breakers with tabs with
rated voltage of 450 V
2015-01-16
ISO/DIS 15082
*
Road vehicles — Tests for rigid plastic safety glazing materials
2015-01-29
(Revision of ISO 15082:1999)
TC 23
ISO/DIS 789-3
Tractors and machinery for agriculture and
forestry
*
Agricultural tractors — Test procedures — Part 3: Turning and clearance
diameters
(Revision of ISO 789-3:1993)
ISO/DIS 5131
*
Tractors for agriculture and forestry — Measurement of noise ate the
operator's position — Survey method
2015-01-16
(Revision of ISO 5131:1996)
ISO/DIS 4254-7
*
Agricultural machinery — Safety — Part 7: Combine harvesters, forage
harvesters, cotton harvesters and sugar cane harversters
2015-03-24
(Revision of ISO 4254-7:2008)
TC 24
ISO/DIS 3310-1
Particle characterization including sieving
*
Test sieves — Technical requirements and testing — Part 1: Test sieves of
metal wire cloth
2015-01-15
(Revision of ISO 3310-1:2000, ISO 3310-1:2000/Cor 1:2004)
ISO/DIS 9044
*
Industrial woven wire cloth — Technical requirements and tests
2015-01-16
(Revision of ISO 9044:1999)
TC 27
ISO/DIS 5074
Solid mineral fuels
*
Hard coal — Determination of Hardgrove grindability index
2015-01-07
(Revision of ISO 5074:1994)
TC 28
ISO/DIS 4263-3.2
Petroleum products and lubricants
*
Petroleum and related products — Determination of the ageing behaviour of
inhibited oils and fluids using the TOST test — Part 3: Anhydrous procedure
2014-12-17
for synthetic hydraulic fluids
(Revision of ISO 4263-3:2010)
TC 34
ISO/DIS 16634-2
Food products
*
Food products — Determination of the total nitrogen content by combustion
according to the Dumas principle and calculation of the crude protein content
— Part 2: Cereals, pulses and milled cereal products
2015-03-03
(Revision of ISO/TS 16634-2:2009)
ISO/DIS 27105
*
Milk and cheese — Determination of hen's egg white lysozyme content
by high performance liquid chromatography
2015-01-30
(Revision of ISO/TS 27105:2009)
ISO/DIS 11290-1
*
Microbiology of the food chain — Horizontal method for the detection and
enumeration of Listeria monocytogenes and other Listeria spp. — Part 1:
Detection method
2015-03-31
(Revision of ISO 11290-1:1996, ISO 11290-1:1996/Amd 1:2004)
ISO/DIS 11290-2
*
Microbiology of the food chain — Horizontal method for the detection and
enumeration of Listeria monocytogenes and of Listeria spp. — Part 2:
Enumeration method
(Revision of ISO 11290-2:1998, ISO 11290-2:1998/Amd 1:2004)
ISO/DIS 18465
*
Microbiology of the food chain - Quantitative analysis of emetic toxin
(cereulide) using LC-MS/MS
2015-03-10
ISO/DIS 17780
*
Animal and vegetable fats and oils — Determination of aliphatic
hydrocarbons in vegetable oils
2015-01-24
TC 35
ISO/DIS 2811-1
Paints and varnishes
*
Paints and varnishes — Determination of density — Part 1: Pycnometer
method
2015-03-17
(Revision of ISO 2811-1:2011)
ISO/DIS 20567-1
*
Paints and varnishes — Determination of stone-chip resistance of coatings —
Part 1: Multi-impact testing
2015-03-17
(Revision of ISO 20567-1:2005)
ISO/DIS 20567-2
*
Paints and varnishes — Determination of stone-chip resistance of coatings —
Part 2: Single-impact test with a guided impact body
2015-03-17
(Revision of ISO 20567-2:2005)
TC 39
Machine tools
ISO/DIS 19085-1
*
Woodworking machines — Safety — Part 1: Common requirements
2015-03-03
ISO/DIS 19085-2
*
Woodworking machines — Safety — Part 2: Horizontal beam panel circular
sawing machines
2015-03-17
TC 43
ISO/DIS 389-3
Acoustics
*
Acoustics — Reference zero for the calibration of audiometric equipment —
Part 3: Reference equivalent threshold force levels for pure tones and bone
2015-03-10
vibrators
(Revision of ISO 389-3:1994, ISO 389-3:1994/Cor 1:1995)
ISO/DIS 362-3
*
TC 44
ISO/DIS 9692-3
Measurement of noise emitted by accelerating road vehicles — Engineering
method — Part 3: Indoor testing M and N categories
2015-01-07
Welding and allied processes
*
Welding and allied processes — Recommendations for joint preparation —
Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium
and its alloys
2015-03-10
(Revision of ISO 9692-3:2000)
TC 58
ISO/DIS 15453
Gas cylinders
*
TC 59
ISO/DIS 16757-2
*
Data structures for electronic product catalogues for building services — Part
2: Geometry
2015-02-08
Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas
industries
*
TC 68
ISO/DIS 10962.2
2015-01-23
Buildings and civil engineering works
TC 67
ISO/DIS 17348
Gas cylinders - Seamless steel and aluminium-alloy gas cylinders Evaluation of existing gas cylinders and consideration of their safe use in
other jurisdictions
Petroleum and natural gas offshore platforms — Guidelines for materials
selection for high content CO2 environment for casings, tubings and
downhole equipment
2015-03-03
Financial services
*
Securities and related financial instruments — Classification of financial
instruments (CFI code)
(Revision of ISO 10962:2001)
TC 76
ISO/DIS 11040-1
Transfusion, infusion and injection, and blood
processing equipment for medical and
pharmaceutical use
*
Prefilled syringes — Part 1: Glass cylinders for dental local anaesthetic
cartridges
2015-01-09
(Revision of ISO 11040-1:1992)
TC 85
Nuclear energy, nuclear technologies, and
radiological protection
ISO/DIS 12749-4
*
Nuclear energy, nuclear technologies, and radiological protection —
Vocabulary — Part 4: Dosimetry for radiation processing
2015-01-07
ISO/DIS 16639
*
Surveillance of the activity concentrations of airborne radioactive substances
in the workplace of nuclear facilities
2015-01-28
TC 92
ISO/DIS 16730-1
Fire safety
*
Fire safety engineering — Procedures and requirements for verification and
validation of calculation methods — Part 1: General
2015-01-28
(Revision of ISO 16730:2008)
TC 94
ISO/DIS 20349-1
Personal safety -- Protective clothing and
equipment
*
Personal protective equipment — Footwear protecting against risks in
foundries and welding — Part 1: Requirements and test methods for
protection against risks in foundries
2015-02-03
(Revision of ISO 20349:2010)
ISO/DIS 20349-2
*
Personal protective equipment — Footwear protecting against risks in
foundries and welding — Part 2: Requirements and test methods for
protection against risks in welding and allied processes
2015-02-03
(Revision of ISO 20349:2010)
ISO 123121:2013/DAmd 1
*
TC 106
ISO/DIS 3964
Eye and face protection — Sunglasses and related eyewear — Part 1:
Sunglasses for general use — Amendment 1
2015-03-10
Dentistry
*
Dentistry — Coupling dimensions for handpiece connectors
2015-03-03
(Revision of ISO 3964:1982)
ISO/DIS 14801
*
Dentistry — Implants — Dynamic fatigue test for endosseous dental implants
2015-03-10
(Revision of ISO 14801:2007)
TC 117
ISO/DIS 5801
Fans
*
Fans — Performance testing using standardized airways
2015-03-17
(Revision of ISO 5801:2007, ISO 5801:2007/Cor 1:2008)
TC 126
ISO/DIS 6565
Tobacco and tobacco products
*
Tobacco and tobacco products — Draw resistance of cigarettes and pressure
drop of filter rods — Standard conditions and measurement
2015-01-23
(Revision of ISO 6565:2011)
TC 127
ISO
9244:2008/DAmd 1
Earth-moving machinery
*
TC 131
Earth-moving machinery — Machine safety labels — General principles —
Amendment 1
2015-01-21
Fluid power systems
ISO/DIS 12829
*
Hydraulic spin-on filters with finite lives — Method for verifying the rated
fatigue life and the rated static burst pressure of the pressure-containing
envelope
ISO/DIS 21018-4
*
Hydraulic fluid power — Monitoring the level of particulate
contamination in the fluid — Part 4: Use of the light extinction technique
2015-01-28
TC 133
ISO/DIS 18163
Clothing sizing systems - size designation, size
measurement methods and digital fittings
*
TC 136
ISO/DIS 7170
Clothing — Digital fittings — Vocabulary and terminology used for the virtual
garment
2015-01-14
Furniture
*
Furniture — Storage units — Determination of strength and durability
2015-01-23
(Revision of ISO 7170:2005)
ISO/DIS 7171
*
Furniture — Storage units — Determination of stability
2015-01-23
(Revision of ISO 7171:1988)
ISO/DIS 7173
*
Furniture - Seating - Test methods for the determination of strength and
durability
2015-01-08
(Revision of ISO 7173:1989)
ISO/DIS 19682
*
TC 142
ISO/DIS 16890-1
2015-01-08
Cleaning equipment for air and other gases
*
TC 147
ISO/DIS 7027-1
Furniture — Tables — Test methods for the determination of stability,
strength and durability
Air filters for general ventilation — Part 1: Technical specifications,
requirements and efficiency classification system based upon Particulate
Matter (PM)
2015-03-10
Water quality
*
Water quality — Determination of turbidity — Part 1: Quantitative methods
2015-03-10
(Revision of ISO 7027:1999)
ISO/DIS 17294-2
*
Water quality — Application of inductively coupled plasma mass
spectrometry (ICP-MS) — Part 2: Determination of selected elements
including uranium isotopes
2015-03-24
(Revision of ISO 17294-2:2003)
ISO/DIS 18635
*
TC 149
ISO/DIS 11243
Water quality — Determination of short-chain polychlorinated alkanes
(SCCPs) in sediment and suspended (particulate) matter — Method using
gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical
ionization (NCI)
2015-03-31
Cycles
*
Cycles — Luggage carriers for bicycles — Requirements and test
methods
(Revision of ISO 11243:1994)
TC 159
Ergonomics
ISO/DIS 7250-3
*
Basic human body measurements for technological design — Part 3:
Worldwide and regional design values for use in ISO equipment standards
ISO/DIS 20685-2
*
3-D scanning methodologies for internationally compatible anthropometric
databases — Part 2: Evaluation protocol of surface shape and repeatability of
2015-03-03
relative landmark positions
TC 171
ISO/DIS 32000-2
Document management applications
*
TC 184
ISO/DIS 11354-2
2015-01-22
Automation systems and integration
*
TC 188
ISO/DIS 9094.3
Document management — Portable document format — Part 2: PDF 2.0
Advanced automation technologies and their applications — Requirements
for establishing manufacturing enterprise process interoperability — Part 2:
Maturity model for assessing enterprise interoperability
2015-01-28
Small craft
*
Small craft — Fire protection
2014-12-17
(Revision of ISO 9094-2:2002, ISO 9094-1:2003)
ISO/DIS 10087
*
Small craft — Craft identification — Coding system
2015-03-17
(Revision of ISO 10087:2006)
ISO/DIS 11591
*
Small craft — Field of vision from helm position
2015-03-10
(Revision of ISO 11591:2011)
ISO/DIS 14895
*
Small craft — Liquid-fuelled galley stoves and heating appliances
2015-03-24
(Revision of ISO 14895:2000)
TC 190
ISO/DIS 15009
Soil quality
*
Soil quality — Gas chromatographic determination of the content of volatile
aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons
— Purge-and-trap method with thermal desorption
2015-03-03
(Revision of ISO 15009:2012)
TC 192
ISO/DIS 19859.2
Gas turbines
*
TC 194
ISO/DIS 10993-6
Gas turbine applications — Requirements for power generation
2014-12-25
Biological and clinical evaluation of medical
devices
*
Biological evaluation of medical devices — Part 6: Tests for local effects after
implantation
2015-03-17
(Revision of ISO 10993-6:2007)
TC 201
ISO/DIS 18554
Surface chemical analysis
*
TC 204
ISO/DIS 17515-1
Surface Chemical Analysis - Electron Spectroscopies - Proceedures for
Identifying, Estimating and Correcting for Unintended Degradation by X-rays
in a Material Undergoing Analysis by X-Ray Photoelectron Spectroscopy
2015-01-21
Intelligent transport systems
*
Intelligent transport systems — Communications access for land mobiles
(CALM) - Evolved Universal Terrestrial Radio Access Network (E-UTRAN) —
Part 1: General usage
2015-01-09
TC 209
ISO/DIS 14644-14
Cleanrooms and associated controlled
environments
*
TC 210
ISO/DIS 18250-8
*
Connectors for reservoir delivery systems for healthcare applications — Part
8: Citrate-based anticoagulant solution for apheresis applications
2015-01-21
Health informatics
*
TC 220
ISO/DIS 21013-3
2015-03-03
Quality management and corresponding general
aspects for medical devices
TC 215
ISO/DIS 14199
Cleanrooms and associated controlled environments — Part 14: Assessment
of suitability for use of equipment by airborne particle concentration
Health informatics — Information models — Biomedical Research Integrated
Domain Group (BRIDG) Model
2015-01-07
Cryogenic vessels
*
Cryogenic vessels — Pressure-relief accessories for cryogenic service —
Part 3: Sizing and capacity determination
2015-03-17
(Revision of ISO 21013-3:2006)
TC 224
ISO/DIS 24521
Service activities relating to drinking water
supply systems and wastewater systems Quality criteria of the service and performance
indicators
*
TC 249
ISO/DIS 18664
2015-01-22
Traditional chinese medicine
*
TC 261
ISO/DIS 17296-1
Activities relating to drinking water and wastewater services — Guidelines for
the management of basic onsite domestic wastewater services
Traditional Chinese Medicine — Determination of heavy metals in herbal
medicines used in Traditional Chinese Medicine
2015-01-28
Additive manufacturing
*
JTC 1
Additive manufacturing — General principles — Part 1: Terminology
2015-01-29
Information technology
ISO/IEC DIS 20243
*
Open Trusted Technology Provider Standard (O-TTPS) — Mitigating
maliciously tainted and counterfeit products
ISO/IEC DIS 40314
*
Information technology — Mathematical Markup Language (MathML) Version
3.0 2nd Edition
ISO/IEC/IEEE DIS
29119-5
*
Software and systems engineering — Software testing — Part 5: Keyworddriven testing
2014-12-30
ISO/IEC DIS 183282
*
Information technology — ICC-managed devices — Part 2: Physical
characteristics and test methods for cards with devices
2015-01-23
ISO/IEC 144963:2009/DAmd 5
*
Information technology — Coding of audio-visual objects — Part 3: Audio —
Amendment 5: Support for Dynamic Range Control
2015-01-09
2015-01-29
ISO/IEC DIS 1449611
*
Information technology — Coding of audio-visual objects — Part 11: Scene
description and application engine
2015-01-09
(Revision of ISO/IEC 14496-11:2005)
ISO/IEC DIS 1449622
*
Information technology — Coding of audio-visual objects — Part 22: Open
Font Format
2015-01-09
(Revision of ISO/IEC 14496-22:2009, ISO/IEC 14496-22:2009/Amd 1:2010,
ISO/IEC 14496-22:2009/Cor 1:2010, ISO/IEC 14496-22:2009/Amd 2:2012)
ISO/IEC DIS 1449631
*
Information technology — Coding of audio-visual objects — Part 31: Video
coding for browsers
2015-01-14
ISO/IEC DIS 2300110
*
Information technology — MPEG systems technologies — Part 10: Carriage
of Timed Metadata Metrics of Media in ISO Base Media File
Format
2015-01-23
ISO/IEC DIS 230034
*
Information technology — MPEG audio technologies — Part 4: Dynamic
Range Control
ISO/IEC 230082:2013/DAmd 4
*
Information technology — High efficiency coding and media delivery in
heterogeneous environments — Part 2: High efficiency video coding —
Amendment 4
2015-01-16
ISO/IEC DIS 230083
*
Information technology — High efficiency coding and media delivery in
heterogeneous environments — Part 3: 3D audio
2015-01-29
ISO/IEC DIS 2300812
*
Information technology — High efficiency coding and media delivery in
heterogeneous environments — Part 12: Image file format
2015-01-14
ISO/IEC 230091:2014/DAmd 2
*
Information technology — Dynamic adaptive streaming over HTTP (DASH)
— Part 1: Media presentation description and segment formats —
Amendment 2: Spatial relationship description, generalized URL parameters
and other extensions
2015-01-07
ISO/IEC 248002:2011/DAmd 1
*
Information technology — JPSearch — Part 2: Registration, identification and
management of schema and ontology — Amendment 1: JPEG Ontology for
Image Description
2015-01-09
ISO/IEC 248003:2010/DAmd 1
*
Information technology — JPSearch — Part 3: Query format — Amendment
1: JPSearch API
2015-01-09
ISO/IEC DIS 291702
*
Information technology — Advanced image coding and evaluation — Part 2:
Evaluation procedure for nearly lossless coding
2015-01-16
ISO/IEC DIS 1800063
*
Information technology — Radio frequency identification for item
management — Part 63: Parameters for air interface communications at 860
MHz to 960 MHz Type C
2015-01-28
(Revision of ISO/IEC 18000-63:2013)
ISO/IEC DIS 297941
*
Information technology — Biometric sample quality — Part 1: Framework
2015-01-22
(Revision of ISO/IEC 29794-1:2009)
ISO/IEC DIS 183841
*
Information technology — Reference Architecture for Service Oriented
Architecture (SOA RA) — Part 1: Terminology and Concepts for SOA
2015-01-14
ISO/IEC DIS 183842
*
Information Technology - Reference Architecture for Service Oriented
Architecture (SOA RA) — Part 2: Reference Architecture for SOA Solutions
2015-01-14
ISO/IEC DIS 18384-
*
Distributed Application Platforms and Services (DAPS) — Reference
2015-01-14
Architecture for Service Oriented Architecture (SOA) — Part 3: Service
Oriented Architecture Ontology
3
FDIS circulated
Period from 01 October to 31 October 2014
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the
date shown
* Available in English only
Vote
terminates
IIW
ISO/FDIS 14373
International Institute of Welding
* Resistance welding — Procedure for spot welding of uncoated and coated
low carbon steels
2014-12-03
(Revision of ISO 14373:2006)
JPC 2
Joint Project Committee - Energy efficiency and
renewable energy sources - Common
terminology
ISO/IEC FDIS 132731
* Energy efficiency and renewable energy sources — Common international
terminology — Part 1: Energy efficiency
2015-01-10
ISO/IEC FDIS 132732
* Energy efficiency and renewable energy sources — Common international
terminology — Part 2: Renewable energy sources
2015-01-10
TC 6
ISO/FDIS 12625-9
Paper, board and pulps
* Tissue paper and tissue products — Part 9: Determination of ball burst
strength
2014-12-03
(Revision of ISO 12625-9:2005)
ISO/FDIS 12625-15
* Tissue paper and tissue products — Part 15: Determination of optical
properties — Measurement of brightness and colour with C/2° (indoor
daylight) illuminant
2014-12-03
ISO/FDIS 12625-16
* Tissue paper and tissue products — Part 16: Determination of optical
properties — Opacity (paper backing) — Diffuse reflectance method
2014-12-03
TC 8
ISO/FDIS 9876
Ships and marine technology
* Ships and marine technology — Marine facsimile receivers for
meteorological charts
2014-12-29
(Revision of ISO 9876:1997)
ISO/FDIS 22554
* Ships and marine technology — Propeller shaft revolution indicators —
Electric type and electronic type
2014-12-09
(Revision of ISO 22554:2007)
ISO/FDIS 17941
* Ships and marine technology — Hydraulic hinged watertight fireproof doors
2014-12-29
TC 10
ISO/FDIS 14084-2
TC 23
Technical product documentation
* Process diagrams for power plants — Part 2: Graphical symbols
2014-12-29
Tractors and machinery for agriculture and
forestry
ISO/FDIS 24253-1
* Crop protection equipment — Spray deposit test for field crop — Part 1:
Measurement in a horizontal plane
2014-12-07
ISO/FDIS 24253-2
* Crop protection equipment — Spray deposit test for field crop — Part 2:
Measurement in a crop
2014-12-14
TC 34
Food products
ISO
29842:2011/FDAmd 1
* Sensory analysis — Methodology — Balanced incomplete block designs —
Amendment 1
2014-12-16
ISO
8455:2011/FDAmd 1
* Green coffee — Guidelines for storage and transport — Amendment 1
2014-12-23
TC 35
ISO/FDIS 3233-3
Paints and varnishes
* Paints and varnishes — Determination of the percentage volume of nonvolatile matter — Part 3: Determination by calculation from the non-volatilematter content determined in accordance with ISO 3251, the density of the
coating material and the density of the solvent in the coating material
2014-12-24
(Revision of ISO 23811:2009)
TC 42
ISO/FDIS 15781
Photography
* Photography — Digital still cameras — Measuring shooting time lag, shutter
release time lag, shooting rate, and start-up time
2014-12-30
(Revision of ISO 15781:2013)
TC 44
ISO/FDIS 18278-1
Welding and allied processes
* Resistance welding — Weldability — Part 1: General requirements for the
evaluation of weldability for resistance spot, seam and projection welding of
metallic materials
2014-12-17
(Revision of ISO 18278-1:2004)
TC 45
ISO/FDIS 1823
Rubber and rubber products
* Rubber hose and hose assemblies for oil suction and discharge service —
Specification
2014-12-17
(Revision of ISO 1823-1:1997, ISO 1823-2:1997)
ISO
28017:2011/FDAmd 1
TC 59
ISO/FDIS 12006-2
* Rubber hoses and hose assemblies, wire or textile reinforced, for dredging
applications — Specification — Amendment 1
2014-12-17
Buildings and civil engineering works
* Building construction — Organization of information about construction
works — Part 2: Framework for classification
2014-12-29
(Revision of ISO 12006-2:2001)
TC 61
ISO 8991:2003/FDAmd 1
TC 72
ISO/FDIS 23771
TC 76
ISO/FDIS 11040-4
Plastics
* Plastics — Determination of creep behaviour — Part 1: Tensile creep —
Amendment 1
2014-12-17
Textile machinery and accessories
* Textile machinery — Guide to the design of textile machinery for reduction
of the noise emissions
2014-12-03
Transfusion, infusion and injection, and blood
processing equipment for medical and
pharmaceutical use
* Prefilled syringes — Part 4: Glass barrels for injectables and sterilized
subassembled syringes ready for filling
2014-12-28
(Revision of ISO 11040-4:2007)
ISO/FDIS 11040-7
TC 98
ISO/FDIS 2394
* Prefilled syringes — Part 7: Packaging systems for sterilized subassembled
syringes ready for filling
2014-12-28
Bases for design of structures
* General principles on reliability for structures
2014-12-04
(Revision of ISO 2394:1998)
TC 106
ISO/FDIS 24234.2
Dentistry
* Dentistry — Dental amalgam
2014-12-03
(Revision of ISO 24234:2004, ISO 24234:2004/Amd 1:2011)
ISO/FDIS 7494-2
* Dentistry — Dental units — Part 2: Air, water, suction and wastewater
system
2014-12-10
(Revision of ISO 11144:1995, ISO 7494-2:2003)
TC 107
ISO/FDIS 4528
Metallic and other inorganic coatings
* Vitreous and porcelain enamel finishes — Guide to selection of test
methods for vitreous and porcelain enamelled areas of articles
2014-12-03
(Revision of ISO 4528:2000)
TC 108
Mechanical vibration, shock and condition
monitoring
ISO/FDIS 10816-21
* Mechanical vibration — Evaluation of machine vibration by measurements
on non-rotating parts — Part 21: Horizontal axis wind turbines with gearbox
2014-12-28
ISO 53492:2001/FDAmd 1
* Mechanical vibration — Measurement and evaluation of human exposure to
hand-transmitted vibration — Part 2: Practical guidance for measurement at
the workplace — Amendment 1
2014-12-24
TC 119
Powder metallurgy
ISO/FDIS 14317
* Sintered metal materials excluding hardmetals — Determination of
compressive yield strength
2014-12-29
(Revision of ISO 14317:2006)
TC 120
ISO/FDIS 14931
Leather
* Leather — Guide to the selection of leather for apparel (excluding furs)
2014-12-03
(Revision of ISO 14931:2004)
TC 121
ISO/FDIS 5356-1
Anaesthetic and respiratory equipment
* Anaesthetic and respiratory equipment — Conical connectors — Part 1:
Cones and sockets
2014-12-10
(Revision of ISO 5356-1:2004)
TC 131
ISO/FDIS 18413
Fluid power systems
* Hydraulic fluid power — Cleanliness of parts and components — Inspection
document and principles related to contaminant collection, analysis and
data reporting
2014-12-14
(Revision of ISO 18413:2002)
TC 138
ISO/FDIS 3501
Plastics pipes, fittings and valves for the
transport of fluids
* Plastics piping systems — Mechanical joints between fittings and pressure
pipes — Test method for resistance to pull-out under constant longitudinal
force
2014-12-31
(Revision of ISO 3501:1976)
ISO/FDIS 6259-3
* Thermoplastics pipes — Determination of tensile properties — Part 3:
Polyolefin pipes
2014-12-03
(Revision of ISO 6259-3:1997)
ISO/FDIS 13844
* Plastics piping systems — Elastomeric-sealing-ring-type socket joints for
use with plastic pipes — Test method for leaktightness under negative
pressure, angular deflection and deformation
2014-12-24
(Revision of ISO 13844:2000)
ISO/FDIS 13845
* Plastics piping systems — Elastomeric-sealing-ring-type socket joints for
use with thermoplastic pipes — Test method for leaktightness under
internal pressure and with angular deflection
2014-12-24
(Revision of ISO 13845:2000)
TC 147
Water quality
ISO/FDIS 17690
* Water quality — Determination of available free cyanide (pH 6) using flow
injection analysis (FIA), gas-diffusion and amperometric detection
2014-12-23
ISO/FDIS 9697
* Water quality — Measurement of gross beta activity in non-saline water —
Thick source method
2014-12-28
(Revision of ISO 9697:2008)
ISO/FDIS 17244
TC 156
ISO/FDIS 18086
TC 164
ISO/FDIS 6892-3
* Water quality - Determination of the toxicity of water samples on the
embryo-larval development of Japanese oyster (Crassostrea gigas) and
blue mussel (Mytilus edulis or galloprovincialis)
2014-12-28
Corrosion of metals and alloys
* Corrosion of metals and alloys — Determination of AC corrosion —
Protection criteria
2014-12-21
Mechanical testing of metals
* Metallic materials — Tensile testing — Part 3: Method of test at low
temperature
2014-12-03
(Revision of ISO 15579:2000)
TC 172
ISO/FDIS 9022-3
Optics and photonics
* Optics and photonics — Environmental test methods — Part 3: Mechanical
stress
(Revision of ISO 9022-3:1998)
ISO/FDIS 9022-6
* Optics and photonics — Environmental test methods — Part 6: Dust
(Revision of ISO 9022-6:1994)
ISO/FDIS 9022-7
* Optics and photonics — Environmental test methods — Part 7: Resistance
to drip or rain
(Revision of ISO 9022-7:2005)
ISO/FDIS 9022-8
* Optics and photonics — Environmental test methods — Part 8: High
pressure, low pressure, immersion
(Revision of ISO 9022-8:1994)
TC 190
ISO/FDIS 11074
Soil quality
* Soil quality — Vocabulary
2014-12-17
(Revision of ISO 11074:2005, ISO 11074:2005/Cor 1:2006)
TC 215
ISO/FDIS 22077-1
Health informatics
* Health informatics — Medical waveform format
rules
— Part 1: Encoding
2014-12-21
(Revision of ISO/TS 11073-92001:2007)
TC 221
ISO/FDIS 10318-1
Geosynthetics
* Geosynthetics — Part 1: Terms and definitions
2014-12-24
(Revision of ISO 10318:2005)
ISO/FDIS 10318-2
* Geosynthetics — Part 2: Symbols and Pictograms
(Revision of ISO 10318:2005)
TC 238
Solid biofuels
2014-12-24
ISO/FDIS 16948
* Solid biofuels — Determination of total content of carbon, hydrogen and
nitrogen
2014-12-31
ISO/FDIS 16968
* Solid biofuels — Determination of minor elements
2014-12-10
IULTCS
ISO/FDIS 17070
International Union of Leather Technologists
and Chemists Societies
* Leather — Chemical tests — Determination of tetrachlorophenol-,
trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and
pentachlorophenol content
2014-12-03
(Revision of ISO 17070:2006)
ISO/FDIS 17228
* Leather — Tests for colour fastness — Change in colour with accelerated
ageing
2014-12-03
(Revision of ISO 17228:2005)
JTC 1
ISO/IEC/IEEE FDIS
23026
Information technology
* Systems and software engineering — Engineering and management of
websites for systems, software, and services information
2014-12-30
(Revision of ISO/IEC 23026:2006)
ISO/IEC/IEEE FDIS
26531
* Systems and software engineering — Content management for product lifecycle, user and service management documentation
2014-12-30
ISO/IEC 1449612:2012/FDAmd 3
* Information technology — Coding of audio-visual objects — Part 12: ISO
base media file format — Amendment 3: Enhanced audio support and other
improvements
2014-12-11
ISO/IEC 1544412:2012/FDAmd 3
* Information technology — JPEG 2000 image coding system — Part 12: ISO
base media file format — Amendment 3: Font streams and other
improvements to file format
2014-12-11
ISO/IEC 230024:2014/FDAmd 2
* Information technology — MPEG video technologies — Part 4: Video tool
library — Amendment 2: FU and FN descriptions for HEVC
2014-12-29
ISO/IEC FDIS 230085
* Information technology — High efficiency coding and media delivery in
heterogeneous environments — Part 5: HEVC Conformance testing and
reference software
2014-12-30
ISO/IEC FDIS 230088
* Information technology — High efficiency coding and media delivery in
heterogeneous environments — Part 8: Conformance Specification for
HEVC
2014-12-30
ISO/IEC FDIS 2300811
* Information technology — High efficiency coding and media delivery in
heterogeneous environments — Part 11: MPEG Media Transport
Composition Information
2014-12-30
ISO/IEC FDIS 200062
* Information technology for learning, education and training — Information
model for competency — Part 2: Proficiency level information model
2014-12-23
ISO/IEC 197941:2011/FDAmd 2
* Information technology — Biometric data interchange formats — Part 1:
Framework — Amendment 2: Framework for XML encoding
2014-12-23
ISO/IEC FDIS 297946
* Information technology — Biometric sample quality — Part 6: Iris image
data
2014-12-17
Standards published
New International Standards published between 01 October and 31 October 2014
* Available in English only
** French version of standard previously published in English only
Price
group
PC 259
ISO 37500:2014
Outsourcing
*
TC 8
Guidance on outsourcing
G
Ships and marine technology
ISO 17325-2:2014
*
Ships and marine technology — Marine environment protection — Oil booms —
Part 2: Strength and performance requirements
A
ISO 18309:2014
*
Ships and marine technology — Incinerator sizing and selection — Guidelines
B
ISO 17907:2014
*
Ships and marine technology — Single point mooring arrangements for
conventional tankers
C
ISO 18289:2014
*
Ships and marine technology — Navigation and shallow-water engineering
vessels — Anchor winches
B
ISO 18296:2014
*
Ships and marine technology — Ship-shifting winches
B
ISO 16556:2014
*
Large yachts — Deck equipment — Anchoring equipments
B
TC 17
Steel
ISO 683-17:2014
Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller
bearing steels
TC 20
Aircraft and space vehicles
D
ISO 27027:2014
*
Aerospace — Solid-state remote power controllers — General performance
requirements
D
ISO 16919:2014
*
Space data and information transfer systems — Requirements for bodies
providing audit and certification of candidate trustworthy digital repositories
D
TC 22
Road vehicles
ISO 15007-1:2014
Road vehicles — Measurement of driver visual behaviour with respect to transport
information and control systems — Part 1: Definitions and parameters
TC 23
Tractors and machinery for agriculture and forestry
ISO 11783-3:2014
Tractors and machinery for agriculture and forestry — Serial control and
communications data network — Part 3: Data link layer
TC 28
Petroleum products and lubricants
C
G
ISO 10370:2014
*
Petroleum products — Determination of carbon residue — Micro method
B
ISO 17315:2014
*
Petroleum products and other liquids — Ethanol — Determination of total acidity
B
by potentiometric titration
TC 29
Small tools
ISO 26623-1:2014
Polygonal taper interface with flange contact surface — Part 1: Dimensions and
designation of shanks
B
ISO 26623-2:2014
Polygonal taper interface with flange contact surface — Part 2: Dimensions and
designation of receivers
A
TC 31
Tyres, rims and valves
ISO 14960-1:2014
Tubeless tyres — Valves and components — Part 1: Test methods
B
ISO 14960-2:2014
Tubeless tyres — Valves and components — Part 2: Clamp-in tubeless tyre valvetest method
B
TC 34
Food products
ISO 11133:2014
*
ISO 22004:2014
ISO 2451:2014
*
TC 35
Microbiology of food, animal feed and water — Preparation, production, storage
and performance testing of culture media
H
Food safety management systems — Guidance on the application of ISO 22000
E
Cocoa beans — Specification
B
Paints and varnishes
Paints and varnishes — Terms and definitions
A
ISO 16474-3:2013
Paints and varnishes — Methods of exposure to laboratory light sources — Part 3:
Fluorescent UV lamps
C
TC 36
Cinematography
ISO 4618:2014
*
ISO 71:2014
*
Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16
mm and 35/32 mm motion-picture film — Positions and dimensions
A
ISO 7832:2014
*
Cinematography — Photoelectric output factor of photographic-type audio-level
test films — Measurement and calibration
B
TC 37
ISO 24156-1:2014
Terminology and other language and content
resources
*
TC 39
ISO/TR 17529:2014
Graphic notations for concept modelling in terminology work and its relationship
with UML — Part 1: Guidelines for using UML notation in terminology work
D
Machine tools
*
Machine tools — Practical guidance and example of risk assessment on electrodischarge machines
D
TC 45
Rubber and rubber products
ISO 815-1:2014
Rubber, vulcanized or thermoplastic — Determination of compression set — Part
1: At ambient or elevated temperatures
C
ISO 1656:2014
*
Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content
D
ISO 2302:2014
*
Isobutene-isoprene rubber (IIR) — Evaluation procedure
B
TC 46
Information and documentation
Information and documentation — Open Systems Interconnection — Interlibrary
Loan Application Protocol Specification — Part 2: Protocol implementation
conformance statement (PICS) proforma
E
ISO 21127:2014
Information and documentation — A reference ontology for the interchange of
cultural heritage information
H
ISO/TR 26122:2008
Information and documentation — Work process analysis for records
C
TC 51
Pallets for unit load method of materials handling
ISO 18613:2014
Pallets for materials handling — Repair of flat wooden pallets
TC 58
Gas cylinders
ISO 3807:2013
Gas cylinders — Acetylene cylinders — Basic requirements and type testing
E
ISO 10297:2014
Gas cylinders — Cylinder valves — Specification and type testing
F
TC 60
Gears
ISO 10161-2:2014
ISO/TR 151442:2014
*
*
Calculation of micro-pitting load capacity of cylindrical spur and helical gears —
Part 2: Examples of calculation for micropitting
C
F
TC 61
Plastics
ISO 17855-1:2014
Plastics — Polyethylene (PE) moulding and extrusion materials — Part 1:
Designation system and basis for specifications
TC 67
Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries
ISO 21809-2:2014
Petroleum and natural gas industries — External coatings for buried or submerged
pipelines used in pipeline transportation systems — Part 2: Single layer fusionbonded epoxy coatings
TC 69
Applications of statistical methods
ISO 22514-8:2014
Statistical methods in process management — Capability and performance — Part
8: Machine performance of a multi-state production process
TC 83
Sports and other recreational facilities and
equipment
ISO 9462:2014
Alpine ski-bindings — Requirements and test methods
E
ISO 13992:2014
Alpine touring ski-bindings — Requirements and test methods
F
TC 84
Devices for administration of medicinal products and
catheters
ISO 11070:2014
Sterile single-use intravascular introducers, dilators and guidewires
TC 87
Cork
ISO 7322:2014
Composition cork — Test methods
B
F
F
D
A
TC 94
Personal safety -- Protective clothing and equipment
ISO 16900-1:2014
Respiratory protective devices — Methods of test and test equipment — Part 1:
Determination of inward leakage
TC 96
Cranes
E
ISO 9928-2:2014
*
Cranes — Crane operating manual — Part 2: Mobile cranes
A
ISO 11662-2:2014
*
Mobile cranes — Experimental determination of crane performance — Part 2:
Structural competence under static loading
F
TC 106
Dentistry
ISO 13116:2014
Dentistry — Test Method for Determining Radio-Opacity of Materials
B
ISO 9680:2014
Dentistry — Operating lights
C
ISO 17730:2014
Dentistry — Fluoride varnishes
A
TC 110
Industrial trucks
ISO 22915-9:2014
Industrial trucks — Verification of stability — Part 9: Counterbalanced trucks with
mast handling freight containers of 6 m (20 ft) length and longer
TC 114
Horology
ISO 10552:2014
Timekeeping instruments — Crowns and sealed tubes — Designs and dimensions
TC 121
Anaesthetic and respiratory equipment
ISO 5367:2014
Anaesthetic and respiratory equipment — Breathing sets and connectors
E
ISO 8836:2014
Suction catheters for use in the respiratory tract
E
TC 126
Tobacco and tobacco products
ISO 10315:2013
Cigarettes — Determination of nicotine in smoke condensates — Gaschromatographic method
C
ISO and Health Canada intense smoking parameters — Part 1: Results of an
international machine smoking study
G
ISO/TR 194781:2014
*
TC 131
Fluid power systems
ISO 6358-3:2014
Pneumatic fluid power — Determination of flow-rate characteristics of components
using compressible fluids — Part 3: Method for calculating steady-state flow-rate
characteristics of systems
TC 145
Graphical symbols
ISO 9186-3:2014
Graphical symbols — Test methods — Part 3: Method for testing symbol referent
association
TC 149
Cycles
B
B
G
C
ISO 4210-4:2014
*
Cycles — Safety requirements for bicycles — Part 4: Braking test methods
E
ISO 4210-6:2014
*
Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods
D
ISO 4210-8:2014
*
Cycles — Safety requirements for bicycles — Part 8: Pedal and drive system test
methods
B
TC 150
Implants for surgery
ISO 14242-1:2014
Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and
displacement parameters for wear-testing machines and corresponding
environmental conditions for test
B
ISO 14243-3:2014
Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and
displacement parameters for wear-testing machines with displacement control and
corresponding environmental conditions for test
C
TC 164
Mechanical testing of metals
ISO 16842:2014
Metallic materials — Sheet and strip — Biaxial tensile testing method using a
cruciform test piece
TC 168
Prosthetics and orthotics
ISO 8549-4:2014
Prosthetics and orthotics — Vocabulary — Part 4: Terms relating to limb
amputation
TC 172
Optics and photonics
ISO 9022-4:2014
*
ISO 17328:2014
ISO 14490-6:2014
*
D
A
Optics and photonics — Environmental test methods — Part 4: Salt mist
B
Optics and photonics — Optical materials and components — Test method for
refractive index of infrared optical materials
C
Optics and photonics — Test methods for telescopic systems — Part 6: Test
methods for veiling glare index
B
TC 173
Assistive products for persons with disability
ISO 7176-1:2014
Wheelchairs — Part 1: Determination of static stability
E
Accessible design — Consideration and assistive products for accessible meeting
C
ISO 17069:2014
*
TC 174
Jewellery
ISO 11427:2014
Jewellery — Determination of silver in silver jewellery alloys — Volumetric
(potentiometric) method using potassium bromide
TC 181
Safety of toys
ISO 8124-4:2014
*
TC 183
ISO 13547-1:2014
G
Copper, lead, zinc and nickel ores and concentrates
*
TC 184
ISO 22400-1:2014
Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and
outdoor family domestic use
A
Copper, lead, zinc and nickel sulfide concentrates — Determination of arsenic —
Part 1: Iron hydroxide concentration and inductively coupled plasma atomic
emission spectrometric method
C
Automation systems and integration
*
Automation systems and integration — Key performance indicators (KPIs) for
manufacturing operations management — Part 1: Overview, concepts and
terminology
D
TC 190
ISO 11268-3:2014
Soil quality
*
Soil quality — Effects of pollutants on earthworms — Part 3: Guidance on the
determination of effects in field situations
TC 198
Sterilization of health care products
ISO 11140-1:2014
Sterilization of health care products — Chemical indicators — Part 1: General
requirements
TC 202
Microbeam analysis
C
E
ISO 14594:2014
*
Microbeam analysis — Electron probe microanalysis — Guidelines for the
determination of experimental parameters for wavelength dispersive spectroscopy
C
ISO 14595:2014
*
Microbeam analysis — Electron probe microanalysis — Guidelines for the
specification of certified reference materials (CRMs)
C
TC 204
Intelligent transport systems
ISO/TS 16785:2014
*
Electronic Fee Collection (EFC) — Interface definition between DSRC-OBE and
external in-vehicle devices
E
ISO/TR 174651:2014
*
Intelligent transport systems — Cooperative ITS — Part 1: Terms and definitions
B
ISO 292812:2013/Amd 1:2014
*
Intelligent transport systems — Communication access for land mobiles (CALM)
— Non-IP networking — Part 2: Legacy system support — Amendment 1
XZ
TC 215
ISO/TR 146392:2014
Health informatics
*
Health informatics — Capacity-based eHealth architecture roadmap — Part 2:
Architectural components and maturity model
TC 217
Cosmetics
ISO 15819:2014
Cosmetics — Analytical methods — Nitrosamines: Detection and determination of
N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS
TC 218
Timber
H
B
ISO 13061-1:2014
*
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 1: Determination of moisture content for physical and
mechanical tests
A
ISO 13061-2:2014
*
Physical and mechanical properties of wood — Test methods for small clear wood
specimens — Part 2: Determination of density for physical and mechanical tests
A
TC 223
Societal security
ISO 22300:2012
Societal security — Terminology
TC 228
Tourism and related services
ISO 13687:2014
*
TC 242
ISO 50003:2014
Tourism and related services — Yacht harbours — Minimum requirements
B
B
Energy Management
*
Energy management systems — Requirements for bodies providing audit and
certification of energy management systems
C
TC 261
Additive manufacturing
ISO 17296-3:2014
Additive manufacturing — General principles — Part 3: Main characteristics and
corresponding test methods
C
ISO 17296-4:2014
Additive manufacturing — General principles — Part 4: Overview of data
processing
B
CASCO
Committee on conformity assessment
ISO/IEC TS 170217:2014
*
JTC 1
Conformity assessment — Requirements for bodies providing audit and
certification of management systems — Part 7: Competence requirements for
auditing and certification of road traffic safety management systems
A
Information technology
ISO/IEC 88243:2008/Cor 1:2014
*
Information technology — Abstract Syntax Notation One (ASN.1): Constraint
specification — Part 3: — Technical Corrigendum 1
ISO/IEC 103735:2014
*
Identification cards — Test methods — Part 5: Optical memory cards
C
ISO/IEC 116945:2014
*
Identification cards — Optical memory cards — Linear recording method — Part 5:
Data format for information interchange for applications using ISO/IEC 11694-4
C
ISO/IEC TR 118019901:2014
*
Information technology — Generic cabling for customer premises — Part 9901:
Guidance for balanced cabling in support of at least 40 Gbit/s data transmission
F
ISO/IEC 247751:2014
*
Information technology — Storage management — Part 1: Overview
D
ISO/IEC 247752:2014
*
Information technology — Storage management — Part 2: Common Architecture
H
ISO/IEC 247753:2014
*
Information technology — Storage management — Part 3: Common Profiles
H
ISO/IEC 247754:2014
*
Information technology — Storage management — Part 4: Block Devices
H
Information technology — Security techniques — Information security
management systems — Overview and vocabulary
E
ISO/IEC
27000:2014
free
ISO/IEC 1449618:2004/Amd
1:2014
*
Information technology — Coding of audio-visual objects — Part 18: Font
compression and streaming — Amendment 1: Updated semantics of
decoderSpecificInfo and font data description for ISOBMFF
ISO/IEC
17788:2014
*
Information technology — Cloud computing — Overview and vocabulary
B
ISO/IEC
17789:2014
*
Information technology — Cloud computing — Reference architecture
G
Standards confirmed
The following International Standards are confimred for a five year period:
TC 2
ISO 8752:2009
Fasteners
XZ
ISO 10669:1999
(reconfirmed)
ISO 13337:2009
ISO 7721-2:1990
(reconfirmed)
ISO 10644:2009
ISO 10673:2009
TC 6
Paper, board and pulps
ISO 8254-1:2009
TC 8
Ships and marine technology
ISO 28000:2007
ISO 15736:2006
(reconfirmed)
ISO 18813:2006
(reconfirmed)
TC 17
Steel
ISO 9444-1:2009
ISO 9444-2:2009
TC 20
Aircraft and space vehicles
ISO 2635:2003
(reconfirmed)
ISO 8056-2:1988
(reconfirmed)
TC 28
Petroleum products and lubricants
ISO 6615:1993
(reconfirmed)
TC 29
Small tools
ISO 603-11:1999
(reconfirmed)
ISO 2976:2005
(reconfirmed)
ISO 3366:1999
(reconfirmed)
ISO 3919:2005
(reconfirmed)
ISO 6344-1:1998
(reconfirmed)
ISO 6344-2:1998
(reconfirmed)
ISO 15636:2003
(reconfirmed)
TC 34
Food products
ISO 660:2009
ISO 16931:2009
ISO 22959:2009
TC 38
Textiles
ISO 105-B07:2009
ISO 105-F02:2009
ISO 105-F09:2009
ISO 105-G02:1993
(reconfirmed)
TC 44
Welding and allied processes
ISO 2560:2009
ISO 3834-1:2005
(reconfirmed)
ISO 3834-2:2005
(reconfirmed)
ISO 3834-3:2005
(reconfirmed)
ISO 3834-4:2005
(reconfirmed)
ISO 15607:2003
(reconfirmed)
ISO 15609-4:2009
ISO 15611:2003
(reconfirmed)
ISO 15614-6:2006
(reconfirmed)
ISO 17663:2009
ISO 22827-1:2005
(reconfirmed)
ISO 22827-2:2005
(reconfirmed)
TC 61
Plastics
ISO 6721-3:1994
(reconfirmed)
ISO 6721-12:2009
ISO 21509:2006
(reconfirmed)
ISO 25217:2009
ISO 25762:2009
ISO 3219:1993
(reconfirmed)
ISO 4593:1993
(reconfirmed)
ISO 6383-2:1983
(reconfirmed)
ISO 7765-1:1988
(reconfirmed)
ISO 7765-2:1994
(reconfirmed)
ISO 8510-2:2006
(reconfirmed)
ISO 14631:1999
(reconfirmed)
ISO 17087:2006
(reconfirmed)
ISO 19212:2006
(reconfirmed)
ISO 61:1976
(reconfirmed)
ISO 119:1977
(reconfirmed)
ISO 120:1977
(reconfirmed)
ISO 172:1978
(reconfirmed)
ISO 3001:1999
(reconfirmed)
ISO 7327:1994
(reconfirmed)
ISO 8975:1989
(reconfirmed)
ISO 8988:2006
(reconfirmed)
ISO 10082:1999
(reconfirmed)
ISO 14526-1:1999
(reconfirmed)
ISO 14526-2:1999
(reconfirmed)
ISO 14526-3:1999
(reconfirmed)
ISO 14527-1:1999
(reconfirmed)
ISO 14527-2:1999
(reconfirmed)
ISO 14527-3:1999
(reconfirmed)
ISO 14528-1:1999
(reconfirmed)
ISO 14528-2:1999
(reconfirmed)
ISO 14528-3:1999
(reconfirmed)
ISO 14529-1:1999
(reconfirmed)
ISO 14529-2:1999
(reconfirmed)
ISO 14529-3:1999
(reconfirmed)
ISO 14530-1:1999
(reconfirmed)
ISO 14530-2:1999
(reconfirmed)
ISO 14530-3:1999
(reconfirmed)
ISO 14849:1999
(reconfirmed)
ISO 14898:1999
(reconfirmed)
ISO 15038:1999
(reconfirmed)
ISO 15252-1:1999
(reconfirmed)
ISO 15252-2:1999
(reconfirmed)
ISO 15252-3:1999
(reconfirmed)
ISO 21627-1:2009
ISO 21627-2:2009
ISO 21627-3:2009
ISO 527-5:2009
ISO 1889:2009
ISO 1890:2009
ISO 15034:1999
(reconfirmed)
ISO 15040:1999
(reconfirmed)
TC 63
Glass containers
ISO 9100-1:2005
(reconfirmed)
ISO 9100-2:2005
(reconfirmed)
ISO 9100-3:2005
(reconfirmed)
ISO 9100-5:2005
(reconfirmed)
ISO 9100-6:2005
(reconfirmed)
ISO 9100-7:2005
(reconfirmed)
ISO 9100-10:2005
(reconfirmed)
ISO 9100-11:2005
(reconfirmed)
ISO 9100-12:2005
(reconfirmed)
ISO 9100-13:2005
(reconfirmed)
ISO 9100-14:2005
(reconfirmed)
TC 67
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries
ISO 23936-1:2009
ISO 10417:2004
(reconfirmed)
ISO 10432:2004
(reconfirmed)
ISO 17078-3:2009
ISO 17824:2009
TC 69
Applications of statistical methods
ISO 2859-1:1999
(reconfirmed)
ISO 2859-10:2006
(reconfirmed)
ISO 3951-5:2006
(reconfirmed)
ISO 8422:2006
(reconfirmed)
ISO 18414:2006
(reconfirmed)
TC 87
Cork
ISO 21128:2006
(reconfirmed)
TC 89
Wood-based panels
ISO 9424:2003
(reconfirmed)
ISO 9426:2003
(reconfirmed)
ISO 9427:2003
(reconfirmed)
ISO 16978:2003
(reconfirmed)
ISO 16979:2003
(reconfirmed)
ISO 16983:2003
(reconfirmed)
ISO 16984:2003
(reconfirmed)
ISO 16999:2003
(reconfirmed)
ISO 20585:2005
(reconfirmed)
TC 92
Fire safety
ISO 5658-2:2006
TC 96
Cranes
ISO 4301-2:2009
ISO 11661:1998
(reconfirmed)
TC 108
Mechanical vibration, shock and condition monitoring
ISO 14839-1:2002
(reconfirmed)
ISO 18649:2004
(reconfirmed)
ISO 20283-3:2006
(reconfirmed)
ISO 22266-1:2009
ISO 5982:2001
(reconfirmed)
ISO 13091-2:2003
(reconfirmed)
ISO 13753:1998
(reconfirmed)
ISO 14835-1:2005
(reconfirmed)
TC 112
Vacuum technology
ISO 1609:1986
(reconfirmed)
TC 113
Hydrometry
ISO 9825:2005
(reconfirmed)
ISO 4363:2002
(reconfirmed)
TC 127
Earth-moving machinery
ISO 10263-1:2009
ISO 10263-2:2009
ISO 10263-3:2009
ISO 10263-4:2009
ISO 10263-5:2009
ISO 10263-6:2009
ISO 17063:2003
(reconfirmed)
TC 135
Non-destructive testing
ISO 10375:1997
(reconfirmed)
ISO 12710:2002
(reconfirmed)
ISO 18175:2004
(reconfirmed)
ISO 5576:1997
(reconfirmed)
ISO 14096-1:2005
(reconfirmed)
ISO 20807:2004
(reconfirmed)
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 7684:1997
(reconfirmed)
TC 146
Air quality
ISO 8760:1990
(reconfirmed)
ISO 8761:1989
(reconfirmed)
ISO 16740:2005
(reconfirmed)
TC 153
Valves
ISO 6552:1980
(reconfirmed)
ISO 6554:1980
(reconfirmed)
ISO 6948:1981
(reconfirmed)
ISO 7841:1988
(reconfirmed)
ISO 7842:1988
(reconfirmed)
TC 173
Assistive products for persons with disability
ISO 7176-21:2009
ISO 16840-4:2009
TC 178
ISO 7465:2007
ISO 14798:2009
Lifts, escalators and moving walks
TC 188
Small craft
ISO 14509-2:2006
(reconfirmed)
ISO 10862:2009
TC 193
Natural gas
ISO 10101-1:1993
(reconfirmed)
ISO 10101-2:1993
(reconfirmed)
ISO 10101-3:1993
(reconfirmed)
ISO 11541:1997
(reconfirmed)
ISO 14111:1997
(reconfirmed)
TC 209
Cleanrooms and associated controlled environments
ISO 14698-1:2003
ISO 14698-2:2003
TC 213
Dimensional and geometrical product specifications and
verification
ISO 463:2006
(reconfirmed)
ISO 3650:1998
(reconfirmed)
ISO 8785:1998
(reconfirmed)
ISO 13565-3:1998
(reconfirmed)
TC 216
Footwear
ISO 19954:2003
(reconfirmed)
TC 226
Materials for the production of primary aluminium
ISO 8007-3:2003
(reconfirmed)
ISO 8008:2005
(reconfirmed)
ISO 20203:2005
(reconfirmed)
TC 227
Springs
ISO 26909:2009
ISO 26910-1:2009
TC 228
Tourism and related services
ISO 11107:2009
ISO 11121:2009
JTC 1
Information technology
ISO/IEC 293412:2008
ISO/IEC 29341-32:2008
ISO/IEC 29341-33:2008
ISO/IEC 29341-311:2008
ISO/IEC 29341-312:2008
ISO/IEC 29341-313:2008
ISO/IEC 29341-412:2008
ISO/IEC 144434:2008
ISO/IEC 156933:2009
Standards withdrawn
Period from 01 October to 31 October 2014
TC 31
Tyres, rims and valves
ISO 14960:2004
(replaced by ISO 14960-1:2014)
TC 61
Plastics
ISO 1872-1:1993
(replaced by ISO 17855-1:2014)
TC 110
Industrial trucks
ISO 10525:1997
(replaced by ISO 22915-9:2014)
TC 127
Earth-moving machinery
ISO/TS 20474-14:2008
(replaced by )
TC 131
Fluid power systems
ISO 6358:1989
(replaced by ISO 6358-1:2013, ISO 6358-2:2013, ISO 6358-3:2014)
TC 218
Timber
ISO 3131:1975
(replaced by ISO 13061-2:2014)
Meeting calendar
(update at 01 October 2014)
Meetings called for the month of September are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
September-November 2014
4-4
Beijing (China)
TC 83
Sports and other recreational facilities and equipment
November 2014
2-7
Belfort (France)
TC 184/SC 4
Automation systems and integration/Industrial data
3-4
Tel Aviv (Israel)
TC 282/SC 1
Water re-use/Treated wastewater re-use for Irrigation
3-5
Madrid (Spain)
PC 252
Natural gas fuelling stations for vehicles
3-5
Washington, D.C
(USA)
TC 241
Road traffic safety management systems
3-7
Singapore
(Singapore)
PC 277
Sustainable procurement
3-7
Cape Town (South
Africa)
TC 45
Rubber and rubber products
3-7
Cape Town (South
Africa)
TC 45/SC 1
Rubber and rubber products/Rubber and plastics hoses and
hose assemblies
3-7
Cape Town (South
Africa)
TC 45/SC 2
Rubber and rubber products/Testing and analysis
3-7
Wuhan (China)
TC 183
Copper, lead, zinc and nickel ores and concentrates
3-7
New Delhi (India)
TC 229
Nanotechnologies
3-7
Lisbon (Portugal)
TC 282
Water re-use
5-6
Lisbon (Portugal)
TC 34/SC 4
Food products/Cereals and pulses
5-6
Tel Aviv (Israel)
TC 282/SC 3
Water re-use/Risk and performance evaluation of water reuse systems
6
Cape Town (South
Africa)
TC 45/SC 4
Rubber and rubber products/Products (other than hoses)
6
Istanbul (Turkey)
TC 270
Plastics and rubber machines
6
Lisbon (Portugal)
TC 282/SC 2
Water re-use/Water re-use in urban areas
7
San Diego (USA)
TC 22/SC 10
Road vehicles/Impact test procedures
7
San Diego (USA)
TC 22/SC 12
Road vehicles/Passive safety crash protection systems
7
Cape Town (South
Africa)
TC 45/SC 3
Rubber and rubber products/Raw materials (including latex)
for use in the rubber industry
1011
Edinburgh (United
Kingdom)
TC 171/SC 2
Document management applications/Application issues
1114
Ottawa (Canada)
TC 244
Industrial furnaces and associated processing equipment
12
LEMONT (USA)
TC 22/SC 3
Road vehicles/Electrical and electronic equipment
1314
Berlin (Germany)
TC 182/SC 1
Geotechnics/Geotechnical investigation and testing
1420
Beijing (China)
TC 130
Graphic technology
1520
Abu Dhabi (United
Arab Emirates)
JTC 1
Information technology
1721
St. Augustine,
Florida (USA)
TC 108/SC 2
Mechanical vibration, shock and condition
monitoring/Measurement and evaluation of mechanical
vibration and shock as applied to machines, vehicles and
structures
1820
Madrid (Spain)
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
19
Geneva
(Switzerland)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
19
Trondheim (Norway)
TC 234
Fisheries and aquaculture
1921
Delft (Netherlands)
TC 23/SC 13
Tractors and machinery for agriculture and forestry/Powered
lawn and garden equipment
2425
Geneva
(Switzerland)
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
2428
Paris (France)
PC 287
Chain of custody of wood and wood-based products
2526
Shenzen (China)
TC 211
Geographic information/Geomatics
2628
Frankfurt (Germany)
TC 184/SC 1
Automation systems and integration/Physical device control
28
London (United
Kingdom)
TC 158
Analysis of gases
December 2014
1-4
Copenhagen
(Denmark)
TC 98
Bases for design of structures
1-5
Dublin (Ireland)
TC 260
Human resource management
3-5
Tokyo (Japan)
TC 232
Learning services outside formal education
3-5
Paris (France)
TC 269
Railway applications
4-5
Fukuoka (Japan)
TC 197
Hydrogen technologies
5
Berlin (Germany)
TC 44/SC 6
Welding and allied processes/Resistance welding and allied
mechanical joining
810
London (United
Kingdom)
TC 147/SC 3
Water quality/Radioactivity measurements
912
Madrid (Spain)
PC 273
Customer contact centres
17
Frankfurt (Germany)
TC 291
Domestic gas cooking appliances
1-4
Copenhagen
(Denmark)
TC 98/SC 2
Bases for design of structures/Reliability of structures
1-4
Copenhagen
(Denmark)
TC 98/SC 3
Bases for design of structures/Loads, forces and other
actions
January 2015
1216
Weinheim (Germany)
TC 69/SC 4
Applications of statistical methods/Applications of statistical
methods in process management
1920
Toledo (Spain)
JTC 1/SC 37
Information technology/Biometrics
1923
Copenhagen
(Denmark)
JTC 1/SC 35
Information technology/User interfaces
2223
Cape Town (South
Africa)
TC 44/SC 8
Welding and allied processes/Equipment for gas welding,
cutting and allied processes
2529
Foshan (China)
TC 107
Metallic and other inorganic coatings
2529
Foshan (China)
*
TC 107/SC 3
Metallic and other inorganic coatings/Electrodeposited
coatings and related finishes
2529
Foshan (China)
*
TC 107/SC 8
Metallic and other inorganic coatings/Chemical conversion
coatings
2627
Paris (France)
TC 166
Ceramic ware, glassware and glass ceramic ware in contact
with food
28
Berlin (Germany)
TC 207/SC 3
Environmental management/Environmental labelling
TC 257
Evaluation of energy savings
TC 213
Dimensional and geometrical product specifications and
verification
TC 58/SC 4
Gas cylinders/Operational requirements for gas cylinders
CSC/SPC
Council/Strategy and Policy Committee (CSC/SPC)
*
February 2015
2-5
Beijing (China)
313
London (United
Kingdom)
913
Fairfax (USA)
11
Geneva
(Switzerland)
11
St. Petersburg,
Florida (USA)
TC 115
Pumps
1213
Geneva
(Switzerland)
President's
committee
President's committee
2223
Miami (USA)
TMB
Technical Management Board
*
*
March 2015
3
Virtual (Unknown)
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
9-
London (United
TC 110/SC 4
Industrial trucks/Rough-terrain trucks
13
Kingdom)
12
West Conshohocken
(Philadelphia) (USA)
15
Caparica (Portugal)
16
TC 221
Geosynthetics
TC 48
Laboratory equipment
Geneva
(Switzerland)
President's
committee
President's committee
1618
Geneva
(Switzerland)
COUNCIL
Council
2327
Vienna (Austria)
*
JTC 1/SC 38
Information technology/Distributed application platforms and
services (DAPS)
2327
Paris (France)
*
PC 278
Anti-bribery management systems
Rio de Janeiro
(Brazil)
**
PC 287
Chain of custody of wood and wood-based products
*
TC 184
Automation systems and integration
*
TC 20/SC 9
Aircraft and space vehicles/Air cargo and ground equipment
(United Kingdom)
**
PC 284
Management system for private security operations Requirements with guidance
Paris (France)
*
TC 24/SC 4
Particle characterization including sieving/Particle
characterization
Foshan (China)
**
TC 107/SC 4
Metallic and other inorganic coatings/Hot dip coatings
(galvanized, etc.)
Foshan (China)
**
TC 107/SC 7
Metallic and other inorganic coatings/Corrosion tests
*
TC 92/SC 1
Fire safety/Fire initiation and growth
TC 117
Fans
*
March-June 2015
2526
Nara (Japan)
March-April 2015
312
Montreal (Canada)
1st Quarter 2015
April 2015
10
London (United
Kingdom)
1314
Lyon (France)
1317
Tienjin (China)
**
TC 161
Control and protective devices for gas and/or oil burners and
appliances
1317
(Czech Republic)
**
TC 224
Service activities relating to drinking water supply systems
and wastewater systems - Quality criteria of the service and
performance indicators
1924
Vico Equense (Italy)
*
TC 184/SC 4
Automation systems and integration/Industrial data
2022
Zurich (Switzerland)
*
TC 126
Tobacco and tobacco products
2022
Zurich (Switzerland)
*
TC 126/SC 1
Tobacco and tobacco products/Physical and dimensional
tests
2022
Zurich (Switzerland)
*
TC 126/SC 2
Tobacco and tobacco products/Leaf tobacco
2024
San Francisco (USA)
*
TC 215
Health informatics
21
Beijing (China)
**
TC 274
Light and lighting
2122
Düsseldorf
(Germany)
*
TC 44/SC 10
Welding and allied processes/Unification of requirements in
the field of metal welding
2122
(Kazakhstan)
**
TC 67/SC 2
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries/Pipeline
transportation systems
2224
General Roca
(Argentina)
*
TC 34/SC 12
Food products/Sensory analysis
23
Düsseldorf
(Germany)
*
TC 44/SC 11
Welding and allied processes/Qualification requirements for
welding and allied processes personnel
24
Atlanta (USA)
**
TC 6/SC 2
Paper, board and pulps/Test methods and quality
specifications for paper and board
25
Atlanta (USA)
**
TC 6
Paper, board and pulps
(France)
**
TC 29
Small tools
(France)
**
TC 29/SC 9
Small tools/Tools with defined cutting edges, cutting items
(USA)
**
TC 34/SC 15
Food products/Coffee
May 2015
1-7
(United Kingdom)
**
TC 67/SC 4
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries/Drilling and
production equipment
4-7
Toronto (Canada)
*
TC 68
Financial services
4-8
Kuching (Malaysia)
**
JTC 1/SC 27
Information technology/IT Security techniques
4-8
(Unknown)
**
TC 36
Cinematography
815
Tokyo (Japan)
**
TC 10
Technical product documentation
1112
Kuching (Malaysia)
*
JTC 1/SC 27
Information technology/IT Security techniques
1115
Ohio (USA)
**
TC 184/SC 5
Automation systems and integration/Interoperability,
integration, and architectures for enterprise systems and
automation applications
1116
Bologna (Italy)
**
TC 130
Graphic technology
12-
London (United
**
TC 156
Corrosion of metals and alloys
15
Kingdom)
13
Paris (France)
**
TC 87
Cork
1822
(Brazil)
**
JTC 1/SC 40
Information technology/IT Service Management and IT
Governance
1822
London (United
Kingdom)
**
TC 4
Rolling bearings
1822
Chengdu (China)
**
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
1822
Luzern (Switzerland)
*
TC 114
Horology
22
Cape Town (South
Africa)
*
TC 228
Tourism and related services
2529
Madrid (Spain)
**
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation
and drainage equipment and systems
2629
(Argentina)
**
TC 85/SC 5
Nuclear energy, nuclear technologies, and radiological
protection/Nuclear fuel cycle
27
London (United
Kingdom)
**
TC 67/SC 5
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries/Casing, tubing and
drill pipe
Glasgow, Scotland
(United Kingdom)
**
JTC 1/SC 32
Information technology/Data management and interchange
(USA)
**
PC 272
Forensic sciences
815
Tokyo (Japan)
**
TC 10/SC 1
Technical product documentation/Basic conventions
815
Tokyo (Japan)
**
TC 10/SC 6
Technical product documentation/Mechanical engineering
documentation
815
Tokyo (Japan)
**
TC 10/SC 10
Technical product documentation/Process plant
documentation
Tokyo (Japan)
**
TC 113
Hydrometry
Tokyo (Japan)
**
TC 113/SC 1
Hydrometry/Velocity area methods
Tokyo (Japan)
**
TC 113/SC 2
Hydrometry/Flow measurement structures
Tokyo (Japan)
**
TC 113/SC 5
Hydrometry/Instruments, equipment and data management
Tokyo (Japan)
**
TC 113/SC 6
Hydrometry/Sediment transport
Tokyo (Japan)
**
TC 113/SC 8
Hydrometry/Ground water
London (United
Kingdom)
**
TC 131/SC 6
Fluid power systems/Contamination control
June 2015
1-5
Sapporo (Japan)
**
TC 42
Photography
1-5
Seattle (USA)
*
TC 43/SC 3
Acoustics/Underwater acoustics
1-6
Philadelphia (USA)
**
TC 147
Water quality
3-5
(Japan)
**
TC 145
Graphical symbols
812
Berlin (Germany)
**
TC 121
Anaesthetic and respiratory equipment
912
Pretoria (South
Africa)
**
REMCO
Committee on reference materials
1011
(France)
**
TC 17/SC 9
Steel/Tinplate and blackplate
1519
Vancouver (Canada)
**
TC 22/SC 13
Road vehicles/Ergonomics applicable to road vehicles
1718
Geneva
(Switzerland)
*
TMB
Technical Management Board
1819
Frankfurt (Germany)
*
TC 184/SC 2
Automation systems and integration/Robots and robotic
devices
2126
Matsue (Japan)
**
TC 37
Terminology and other language and content resources
2225
Avignon (France)
*
TC 54
Essential oils
2226
(Netherlands)
**
TC 34/SC 9
Food products/Microbiology
2226
(China)
**
TC 69
Applications of statistical methods
2226
Göteborg (Sweden)
*
TC 188
Small craft
30
Virtual (Unknown)
*
President's
committee
President's committee
Matsue (Japan)
**
JTC 1/SC 28
Information technology/Office equipment
(Australia)
**
JTC 1/SC 36
Information technology/Information technology for learning,
education and training
Zurich (Switzerland)
**
TC 17/SC 17
Steel/Steel wire rod and wire products
(Europe)
**
TC 34/SC 18
Food products/Cocoa
Beijing (China)
**
TC 46
Information and documentation
Mexico City (Mexico)
**
TC 242
Energy Management
(Unknown)
**
TC 268/SC 1
Sustainable development in communities/Smart community
infrastructures
June-July 2015
303
(Cyprus)
**
TC 193
Natural gas
303
(Cyprus)
**
TC 193/SC 3
Natural gas/Upstream area
2nd Quarter 2015
(Europe)
**
TC 94/SC 13
Personal safety -- Protective clothing and
equipment/Protective clothing
Istanbul (Turkey)
**
TC 120
Leather
(China)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
London (United
Kingdom)
**
TC 8/SC 8
Ships and marine technology/Ship design
(USA)
**
TC 31/SC 9
Tyres, rims and valves/Valves for tube and tubeless tyres
Berlin (Germany)
*
TC 91
Surface active agents
(USA)
**
TC 86/SC 6
Refrigeration and air-conditioning/Testing and rating of airconditioners and heat pumps
*
TC 206
Fine ceramics
1st Semester 2015
July 2015
1-7
August 2015
2628
Jeju (Korea,
Republic of)
August-September 2015
314
Hokaido (Japan)
*
JTC 1/SC 35
Information technology/User interfaces
September 2015
1-6
(Canada)
**
TC 163
Thermal performance and energy use in the built
environment
714
Sydney (Australia)
**
TC 96
Cranes
13
Seoul (Korea,
Republic of)
*
President's
committee
President's committee
1317
Lahaina, Hawaii
(USA)
**
TC 127
Earth-moving machinery
14
Seoul (Korea,
Republic of)
*
COUNCIL
Council
1418
(Canada)
**
TC 205
Building environment design
1425
Berlin (Germany)
*
TC 213
Dimensional and geometrical product specifications and
verification
15
Seoul (Korea,
Republic of)
*
DEVCO
Committee on developing country matters
1516
Seoul (Korea,
Republic of)
*
TMB
Technical Management Board
1618
Seoul (Korea,
Republic of)
*
GA
General Assembly
17
Seoul (Korea,
Republic of)
*
CSC/FIN
Council/Council Standing Committee on Finance (CSC/FIN)
1718
Moscow (Russian
Federation)
**
TC 197
Hydrogen technologies
2829
Basel (Switzerland)
**
TC 44/SC 8
Welding and allied processes/Equipment for gas welding,
cutting and allied processes
(Europe)
**
TC 22/SC 19
Road vehicles/Wheels
Vienna (Austria)
**
TC 33
Refractories
(Europe)
**
TC 67
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries
(Japan)
**
TC 133
Clothing sizing systems - size designation, size
measurement methods and digital fittings
Johor Bahru
(Malaysia)
**
TC 165
Timber structures
Seattle (USA)
**
TC 201/SC 6
Surface chemical analysis/Secondary ion mass spectrometry
(Netherlands)
**
TC 258
Project, programme and portfolio management
October 2015
1
Rome (Italy)
*
TC 39/SC 4
Machine tools/Woodworking machines
5-9
Dublin (Ireland)
*
JTC 1/SC 38
Information technology/Distributed application platforms and
services (DAPS)
8
Virtual (Unknown)
*
President's
committee
President's committee
1216
Paris (France)
*
TC 34/SC 17
Food products/Management systems for food safety
1517
Seattle (USA)
*
TC 201
Surface chemical analysis
1923
(Germany)
**
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
1923
Gaithersburg (USA)
**
TC 92
Fire safety
1923
Gaithersburg (USA)
*
TC 92/SC 1
Fire safety/Fire initiation and growth
2223
Berlin (Germany)
*
TC 209
Cleanrooms and associated controlled environments
2630
New Delhi (India)
*
JTC 1/SC 27
Information technology/IT Security techniques
2729
Berlin (Germany)
*
TC 256
Pigments, dyestuffs and extenders
28-
Tsukuba (Japan)
**
TC 202
Microbeam analysis
30
Madrid (Spain)
**
TC 10/SC 8
Technical product documentation/Construction
documentation
(Netherlands)
**
TC 34/SC 2
Food products/Oleaginous seeds and fruits and oilseed
meals
(Netherlands)
**
TC 34/SC 11
Food products/Animal and vegetable fats and oils
Nairobi (Kenya)
**
TC 38
Textiles
Nairobi (Kenya)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
Nairobi (Kenya)
**
TC 38/SC 2
Textiles/Cleansing, finishing and water resistance tests
Nairobi (Kenya)
**
TC 38/SC 23
Textiles/Fibres and yarns
Nairobi (Kenya)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for
textile fabrics
Sao Paulo (Brazil)
**
TC 58/SC 2
Gas cylinders/Cylinder fittings
Madrid (Spain)
**
TC 59/SC 16
Buildings and civil engineering works/Accessibility and
usability of the built environment
Sao Paulo (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
Santiago (Chile)
**
TC 195
Building construction machinery and equipment
November 2015
912
(Spain)
**
TC 189
Ceramic tile
913
Kobe (Japan)
*
TC 21
Equipment for fire protection and fire fighting
1113
(Malaysia)
**
TC 123
Plain bearings
1213
Kuala Lumpur
(Malaysia)
**
TC 227
Springs
(China)
**
JTC 1
Information technology
Dayton, Ohio (USA)
**
TC 159/SC 3
Ergonomics/Anthropometry and biomechanics
(China)
**
TC 282
Water re-use
(France)
**
TC 172/SC 1
Optics and photonics/Fundamental standards
(USA)
**
TC 184/SC 4
Automation systems and integration/Industrial data
4th Quarter 2015
2nd Semester 2015
Month unknown 2015
Brussels (Belgium)
**
TC 23
Tractors and machinery for agriculture and forestry
(Brazil)
**
TC 23/SC 17
Tractors and machinery for agriculture and forestry/Manually
portable forest machinery
(USA)
**
TC 27
Solid mineral fuels
(Finland)
**
TC 44
Welding and allied processes
(France)
**
TC 45
Rubber and rubber products
Berlin (Germany)
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
(Japan)
**
TC 142
Cleaning equipment for air and other gases
(China)
**
TC 155
Nickel and nickel alloys
(United Kingdom)
**
TC 164
Mechanical testing of metals
(Austria)
**
TC 190
Soil quality
Vienna (Austria)
**
TC 190/SC 2
Soil quality/Sampling
**
TC 120
Leather
**
TC 213
Dimensional and geometrical product specifications and
verification
*
COUNCIL
Council
**
TC 161
Control and protective devices for gas and/or oil burners and
appliances
(Brazil)
**
TC 67/SC 4
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries/Drilling and
production equipment
(India)
**
TC 85
Nuclear energy, nuclear technologies, and radiological
protection
**
JTC 1/SC 36
Information technology/Information technology for learning,
education and training
**
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker
analysis
*
COUNCIL
Council
January 2016
(China)
February 2016
(USA)
March 2016
1718
Geneva
(Switzerland)
April 2016
Seoul (Korea,
Republic of)
May 2016
June 2016
(Germany)
1st Semester 2016
(China)
September 2016
19
Beijing (China)
2123
Beijing (China)
*
GA
General Assembly
Paris (France)
**
TC 17
Steel
Sao Paulo (Brazil)
**
TC 209
Cleanrooms and associated controlled environments
Shanghai (China)
**
TC 213
Dimensional and geometrical product specifications and
verification
**
TC 201
Surface chemical analysis
**
JTC 1
Information technology
October 2016
(Korea, Republic of)
November 2016
(Norway)
Month unknown 2016
(Korea, Republic of)
**
JTC 1/SC 23
Information technology/Digitally Recorded Media for
Information Interchange and Storage
(Russian Federation)
**
REMCO
Committee on reference materials
(Denmark)
**
TC 37
Terminology and other language and content resources
(Australia)
**
TC 44
Welding and allied processes
(Malaysia)
**
TC 45
Rubber and rubber products
Wellington (New
Zealand)
**
TC 46
Information and documentation
(Sweden)
**
TC 102
Iron ore and direct reduced iron
(China)
**
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of
fluids/Plastics pipes and fittings for water supplies
**
JTC 1/SC 36
Information technology/Information technology for learning,
education and training
**
JTC 1/SC 36
Information technology/Information technology for learning,
education and training
June 2017
(Australia)
June 2018
(Korea, Dem. P.
Rep. of)