vinyl application instructions

advertisement
10.2013
OUR IMAGE PARTNERS
Contact your Regional Sales Manager at 1-877-GO-CLARK
Your RSM is the best resource to answer questions around your specific installation. In addition, your RSM can
provide the feedback an OK to proceed with special requests or special applications of Clarkʼs brand image.
• You will find links to all of Clarkʼs image partners at www.clarkbrands.com
• Clark also publishes our entire Image Manual online. Visit www.clarkbrands.com for details.
LSI Graphic Solutions - Sheri Freeman at 1-330-494-9444
LSI manufactures canopy and building fascia film and logos, entry door decals,
dispenser door graphics, dispenser product ID panels, dispenser valance graphics,
and fuel island regulatory and warning decals to Clark Brands standards.
Everbrite - Judy Miller at 1-800-796-7427, ext. 1612
Everbrite provides full standard and custom sign services to Clark, including
sign footings, fixtures, logo faces, conventional & LED gas price signs.
Everbrite has a custom website you may access through the Clark Brands
website to configure your sign.
Jones-Blair - 1-800-492-9400
Jones-Blair Premium coatings are now available in Clark colors. Enjoy superior color
holding capabilities as well as the long life of a Jones-Blair coatings. Jones-Blair usually
ships paints the next day from their factory in Texas.
You can schedule delivery to make sure the paint is ready when you need it.
Glidden - John D. Kidd at 630-258-4693
Glidden paints may be purchased at your local Home Depot or nearby Glidden retailer.
You can also go to homedepot.com and click on Store Locator to find the closest
Home Depot near you. Please refer to the Clark Specifications Paint Chart for your
paint formulations chart for color specifications.
Couch & Philipp - 1-800-854-3360
Upgrade your Pump Skirts with new Clark branded DoorSkins... the simple, durable,
snap-on imaging product that eliminates the problems commonly associated with decaling.
Petroleum Parts Inc. - 1-866-449-9211
Petroleum Parts Inc. (PPI) is a leading supplier of Clark branded dispenser graphic
overlays and replacement exterior sheet metal. PPI has a custom website you may
access through the Clark Brands website. PPI is also a premier re-manufacturer of fuel
dispensers and POS parts and accessories.
IMAGE PROCESS SUMMARY
New Location – Work up Image Scope
Contact Account Manager with Questions (send pictures if not done already)
Order Material from Clark Image and Sign Vendors
Graphics:
LSI Graphic Solutions, contact Sheri Freeman at 800-245-4624
Signs:
(Clark Illuminated, LEDʼs, etc), Everbrite Signs, contact KeriAnn Krikau at 800-558-3888, extension 7114
or Judy Miller at 800-796-7427, extension 1612
Paint:
Jones-Blair, orders contact Elida Espinoza, 800-492-9400, extension 1604 or [email protected]
Technical assistance, contact Will Dryden, 800-492-9400, extension 1634 or Kristal Bluemer at extension 1645
Glidden/Home Depot, Contact John Kidd at 630-258-4693
Dispenser Door Skins:
Couch & Philippi, contact Jennifer Clark at 800-854-3360
Special dispenser decals: Contact PPI at 866-994-9200 or
State Associations
Schedule work
Advise Account Manager when Image Work is completed by sending photos
CLARK BRANDS, LLC IMAGE CONVERSION SCOPE OF WORK
ID/ Price Signs
A) Clark approved signs will be installed.
B) Pole(s) will painted Clark light gray.
Canopy
A) Canopy fascia will be painted/filmed with 8" of Clark red on top and the rest will be Clark Sapphire blue.
B) Two backlit illuminated Clark canopy logos or decals with speed lines will be installed.
C) Canopy columns will be painted Clark light gray.
D) Clearance decals shall be clearly displayed in each direction.
Dispensers
A) All dispensers will receive Clark approved image including, but not limited to, pump skirts, pump numbers, octane rating, product grade and regulatory decals.
B) Dispenser curbs shall be painted dark gray (if not painted - then not necessary to paint).
C) Dispenser guard poles will be painted Clark light gray.
Building - Required
A) The credit card and welcome decals will be installed on the front doors.
Building - Options that need to be discussed with account Manager
A) Building fascia if needed will be painted/filmed with 8" of Clark red on top and the rest will be Clark Sapphire blue.
B) The building exterior walls will painted Clark light gray unless they are constructed of natural materials (brick, stone, etc.) which are currently not painted.
Natural materials that are already painted will be painted Clark light gray.
C) Building curbs will be painted dark gray if necessary (if not painted - then not necessary to paint).
Miscellaneous
A) All perimeter poles, air tower poles, etc. will be painted Clark light gray.
B) All other buildings, storage facilities, etc. will be painted Clark light gray.
NOTE: Variations from the standard Clark Image Program will require approval from your Clark Account Manager.
TABLE OF CONTENTS
1.0
Image Overview
1.1
General Site Treatment
1.3
Building Image Treatment
6.0
Pump Skirt Decals
6.1
Universal Pump Skirts
6.2
Diesel Pump Skirts
2.0
Image Components
2.1
Jones-Blair Order Form
2.4
Glidden/Home Depot Exterior Finish Usage Guide
2.5
Glidden Exterior Paint
2.6
Glidden Interior Paint
2.7
Vinyl Colors and Application Instructions
2.8
Vinyl Application Instructions
7.0
3.0
Building Elements
3.1
Building and Canopy Fascia Logos
3.2
Building and Canopy Logo Placement
3.3
Entry Door Decals
Dispenser Product Panels
7.1
Dispenser Product Panel Overview
7.2
Dresser Wayne Ovation
7.3
Dresser Wayne 590
7.4
Gilbarco Eclipse
7.5
Gilbarco Encore
7.6
Tokheim H422B/MPD
7.7
Adaptable Product ID
7.8
Diesel
8.0
Miscellaneous Decals
8.1
Regulatory Decals
8.2
Dispenser Decals
4.0
Canopy Elements
4.1
Canopy Overview
4.2
Filmover Graphics
4.3
Illuminated Canopy Logo
4.4
Canopy Logo Placement
4.5
Canopy Clearance Decals
5.0
Dispenser Decals
5.1
Dispenser Decal Overview
5.2
Dispenser Decal Kits
5.3
Dresser Wayne Ovation
5.4
Dresser Wayne 590
5.5
Dresser Wayne 360/370 Single Product
5.6
Dresser Wayne 360/370 Dual Product
5.7
Dresser Wayne Single Hose
5.8
Dresser Wayne Dual Hose
5.9
Gilbarco Eclipse
5.10
Gilbarco Encore
5.11
Tokheim MPD
5.12
Tokheim H422B
IMAGE OVERVIEW
Contents
General Site Treatment
Building Image Treatment
1.0
1.1
1.2
GENERAL SITE TREATMENT
Fascia Logo each side
(if required)
Speed Lines
Primary Sign
Speed Lines
Fascia Logo
Fascia Film
Clearance
Decal
Warning /
No Smoking Decal
Unleaded
Gasoline
CONTAINS TEN PERCENT
ETHANOL PLUS DETERGENTS
FOR USE AS A
MOTOR FUEL ONLY
UNLEADED
Unleaded
Gasoline
CONTAINS TEN PERCENT
ETHANOL PLUS DETERGENTS
FOR USE AS A
MOTOR FUEL ONLY
UNLEADED
GASOLINE
GASOLINE
Gasoline - Use As A Motor Fuel Only
Harmful or Fatal if Swallowed
Long-term Exposure to Vapors
Cancer in Laboratory Anima
Unleaded
Gasoline
Unleaded
Gasoline
CONTAINS TEN PERCENT
ETHANOL PLUS DETERGENTS
FOR USE AS A
MOTOR FUEL ONLY
CONTAINS TEN PERCENT
ETHANOL PLUS DETERGENTS
UNLEADED
GASOLINE
FOR USE AS A
MOTOR FUEL ONLY
UNLEADED
Gasoline - Use As A Motor Fuel Only
Harmful or Fatal if Swallowed
Long-term Exposure to Vapors
Cancer in Laboratory Anima
GASOLINE
Gasoline - Use As A Motor Fuel Only
Harmful or Fatal if Swallowed
Long-term Exposure to Vapors
Cancer in Laboratory Anima
Gasoline - Use As A Motor Fuel Only
Harmful or Fatal if Swallowed
Long-term Exposure to Vapors
Cancer in Laboratory Anima
Regulatory
Decals
Door Decals
Curb Painting
Curb Painting
Dispenser Door
1.1
Dispenser Guard
BUILDING IMAGE TREATMENT
3596
3596
3596
3596
Æ
3596
3596
Walls, columns or fascia which are constructed of natural materials (brick, stone, etc.) that are currently non-painted should remain non-painted.
Building or canopy fascias which are textured (stucco, asphalt shingle, etc.) cannot be effectively re-imaged using film. If these are not painted, they should remain
non-painted.
Previously painted walls or columns constructed of natural materials should be painted Clark gray.
Special Note - All building treatment is site specific. Each building design presents unique features that may or may not be covered in this manual. In the event you encounter an existing
condition that is questionable, please contact your Clark Brands Account Manager for instructions before ordering image elements.
1.2
IMAGE COMPONENTS
Contents
Jones-Blair Order Form
Glidden/Home Depot Exterior Finish Usage Guide
Glidden Exterior Paint
Glidden Interior Paint
Vinyl Colors and Application Instructions
Vinyl Application Instructions
2.0
2.1
2.4
2.5
2.6
2.7
2.8
CLARK BRANDS SERVICE STATION ORDER FORM
PAINTS, PRIMERS & REDUCERS
Revised August 7, 2013
(Contact your rep or Jones-Blair Customer service for current pricing)
P.O. #
MC #
VISA #
Exp. Date
Job #
Instructions
Bill To:
Ship To:
Jones-Blair
No.
Clark Color.
Description
Size
Urethane Products for Building Exteriors
A2N5010
Blue fascia
Acrylithane HS2 Gloss
4500-644
Light Gray
Acrylithane HS3 Gloss
4500-645
Dark Gray
Acrylithane HS3 Gloss
45080
White for Decks
Acrylithane HS2 Gloss
A2N-D10290 Red fascia
Acrylithane HS2 Gloss
Quantity
1-gallon
1-gallon
1-gallon
1-gallon
1-gallon
NOTE: Mix all colors with 1-qt. 99951 Catalyst (order separately)
99951
Acrylithane HS2 Catalyst
1-quart
(Order 1 quart for each gallon of Urethane paint ordered)
o
21092
Urethane Thinner Acrylithane Spray Reducer (> 72 F.)
1-gallon
21092
Urethane Thinner Acrylithane Spray Reducer (< 72o F.)
5 gal. Unit
o
21093
Urethane Retarder Acrylithane Retarder ( 80 F. Plus )
1-gallon
99011
Urethane Acceler Acrylithane Accelerator (for cold weather 35-50 degrees F.)
1-quart
Rust-Not HP Acrylic Latex (Touch Up) Paints for bollards & Curbs.
Note: These are approximations only and may not be exact matches for color & gloss as the urethanes.
tbd
Dark Gray
Rust-Not HP Gloss Latex for Curbs
1-gallon
tbd
Light Gray
Rust-Not HP Gloss Latex for Columns
1-gallon
Primers for Factory Finished ACM & Canopy Decks
Ureprime HS2 (2 part) (Orders outside California)
33010
White
1-gallon
33014
White
Ureprime HS4 (2 part) (For all orders inside California) 1-gallon
99951
Catalyst/Hardner
Acrylithane HS2, HS3 & HS4 series Catalyst
1-quart
Primer/Barrier Coat for Previously Field Painted Surfaces
1500-077
White
Stantest HS Multi-Purpose Alkyd Primer - White
1-gallon
1500-077
1560-032
1560-032
White
Gray
Gray
Should be used as a barrier coat over unknown coatings to prevent
lifting or use over previous field painted, dark surfaces for good hide.
5-gallon
Stantest HS Multi-Purpose Alkyd Primer - Gray
Stantest HS Multi-Purpose Alkyd Prime - Gray
1-gallon
5-gal. Unit
Above primers should be used as a barrier coat over unknown
coatings to prevent lifting.
Xylene Reducer for Stantest HS Multi-Purpose Primer
20653
Reducer
Primers for Stonex, Brick, Galvanized Metal & Aluminum
3090
White
Multi-Grip 2 Acrylic Latex Primer
3090
White
Multi-Grip 2 Acrylic Latex Primer
Multi Grip 2 Acrylic Latex Metal Primer - Gray
3091
Gray
Block Fillers
3781
White
Acrylic Latex Block Filler
1-gallon
1-gallon
5-gallon
1-gallon
5-gallon
Use to fill split-face or other porous block before applying top coats
HELPFUL PAINTING TIPS
Acrylithane HS2 or HS3 Urethane are two component system. Add 1-quart of #99951 Catalyst to each 3/4 filled gallon of paint, regardless of
color. #99951 Catalyst is ordered separately from the paint.
#1500-077 Multi-Purpose Primer should be used to prime field painted dark surfaces for good hide and to achieve brighter, more vibrant
colors.
Factory finished facias (ACM) or canopy decks should be primed with one coat # 33010 White Ureprime HS2 Epoxy Urethane before finish
coating. #33010 Ureprime HS2 is a two component system. Add one quart #99951 Catalyst to each 3/4 filled gallon of primer.
New masonry, brick and stucco should be primed with #3090 White or 3091 Gray Multi-Grip 2 Acrylic Latex Primer before applying
Acrylithane HS2 finishes.
Porous block should be primed and filled with #3781 Latex Block Filler before applying Acrylithane HS2 or HS3 finishes.
Field Application Guides for urethanes and other coatings will be provided upon request.
Material Safety Data Sheets (MSDS) are shipped with each order. Technical Data Sheets may be ordered from Customer Service.
Orders received before 12:00 Noon, CST will be shipped same day.
PRICING / TERMS / FREIGHT
Prices: Prices are subject to change without notice. Pricing is for full or broken cases. Prices quoted are net to
CLARK, Divisions, Jobbers, Dealers and Sub-contractors. Terms: Net 30 Days.
Freight: Quoted prices are for the Continental United States and are FOB destination in quantities of sixty (60) gallons or more
of Jones-Blair manufactured products. Less than sixty gallons are FOB Dallas, TX. Thinners/Solvents will ride free with sixty
gallons or more of Jones-Blair manufactured products. Shipments outside the Continental United States are FOB Dallas, TX.
For order placement or technical assistance:
Jones-Blair Company
2728 Empire Central
Dallas, TX 75235
(800) 492-9400
(214) 353-1600
Customer Service Fax: (800) 325-6321
e-mail: [email protected]
Order Placement: Elida Rodriquez, Ext. 1604
Technical Assistance:
Will Dryden - National Sales/Market Manager, Oil Services, Ext. 1634, e-mail: [email protected]
Cell: 214-676-7000 or Kristal Bluemer Cell: 214-676-8542
Kristal Bluemer - [email protected]
JONES-BLAIR PAINT COMPANY ORDER FORM
CANOPY UNDERDECK COATINGS
February, 2013
Bill To:
Site:
Account #;
P.O.
Visa
Exp. Date
MC
Exp. Date
Ship To:
Special InstructionsJones Blair No.
Color
Description
Unit Size
Quantity
URETHANE SYSTEM - Interior Carwash
45080
33014
White Gloss Top Coat: Acrylithane HS2 Urethane Gloss White
White Primer Primer: Ureprime Urethane Epoxy HS4 White
Acrylithane and Ureprime HS2 / HS4 Catalyst/Hardener
Mix 4:1 ratio with HS4 Products
99951 Catalyst
REDUCERS / THINNERS / ADDITIVES for Acrylithane HS2 & Ureprime HS2
Acrylithane Spray Reducer (< 72o F.)
21102
21102
Acrylithane Spray Reducer (< 72o F.)
Acrylithane Spray Reducer (> 72o F.)
21092
21092
Acrylithane Spray Reducer (< 72o F.)
Acrylithane Retarder ( 80o F. Plus )
21093
99011
Acrylithane Accelerator (for cold weather)
1 gallon
1 gallon
1 quart
1 gallon
5 gallon
1 gallon
5 gallon
1 gallon
1 quart
PRICING / TERMS / FREIGHT
Note: Most orders received before 12:00 Noon, CST will be shipped within 24 hours.
Prices: Prices are subject to change without notice. Pricing is for full or broken cases. Prices quoted are Terms net 30 days
to Wholesalers, Jobbers, and Sub-contractors with approved credit.
Freight: Quoted prices are for the Continental United States and are FOB destination in quantities of sixty (60) gals. Of
manufactured products. Less than sixty gallons are FOB Dallas, TX.
Order Placement:
Elida Rodriguez - Customer Service, Ext. 1604 or e-mail: [email protected]
JONES-BLAIR COMPANY 2728 Empire Central, Dallas, TX 75235
Toll Free: (800) 492-9400, Customer Service Fax: (800) 325-6321
Technical Assistance:
Will Dryden-National Sales/Market Manager, Oil Services, Ext. 1634,Cell: 214-676-7000 e-mail: [email protected]
Kristal Bluemer- National Sales, Ext. 1645, Cell: 214-676-8542- e-mail: [email protected]
GLIDDEN/HOME DEPOT EXTERIOR FINISH USAGE GUIDE
Please Contact John D. Kidd Regional Pro Manager (630) 258-4693 for your nearest Glidden representative.
CLARK BRANDS GLIDDEN/HOME DEPOT EXTERIOR FINISH USAGE GUIDE
(FOR NEW SUBSTRATES ONLY)
APPLICATION
Dispenser Guard (Masonry)
Curb Painting (Masonry)
Curb Painting (Metal)
Building & Canopy Deckings (Metal)
Building Walls (Masonry)
Fascia Film Base (Metal)
Fascia Film Base (Wood)
Canopy Ceiling (Metal)
Canopy Ceiling (Wood)
Columns and Poles (Masonry)
Columns and Poles (Metal)
Speed Lines & Striping (Masonry)
COLOR
Clark Dark Grey
Clark Dark Grey
Clark Dark Grey
Clark Light Grey
Clark Light Grey
Clark Blue
Clark Blue
Clark White
Clark White
Clark Light Grey
Clark Light Grey
Clark Red
PRIME COAT
3210 Gripper
3210 Gripper
*4360 Devguard
*4360 Devguard
3210 Gripper
*4360 Devguard
3210 Gripper
*4360 Devguard
3210 Gripper
3210 Gripper
^4360 Devguard
3210 Gripper Grey
MID/FINISH COAT
GL6812 Glidden Premium
GL6812 Glidden Premium
GL6812 Glidden Premium
GL6811 Glidden Premium
GL6811 Glidden Premium
GL6813 Glidden Premium
GL6813 Glidden Premium
GL6811 Glidden Premium
GL6811 Glidden Premium
GL6811 Glidden Premium
GL6811 Glidden Premium
GL6813 Glidden Premium
Note: Primers specified on this list are for coating over New Substrates ONLY. If painting over an existing coating, the coating MUST be sound, clean and
deglossed. Any rust or loose paint must be removed and the area spot primed with the above primers based on type of substrate. Once completed prime
entire area with 3210 Gripper. Please refer to the product specification guide if there are any questions or refer to you Glidden Sales Team to assist you.
Please Contact John D. Kidd Regional Pro Manager (630) 258-4693 for your nearest Glidden representative to assist you. All products listed are
special order. Please allow reasonable lead times for all paints & related products.
2.4
• All product may be purchased at your local Home Depot.
Please contact John D. Kidd for assistance.
• Walls or columns constructed of natural materials (brick, stone,
etc.) that are currently non-painted should remain non-painted.
• Natural materials that are currently painted should be painted
Clark Light Grey.
• Building and canopy fascias that are too textured to effectively
film over with the red/dark blue scheme should be painted.
• Fascias constructed of wood or metal shingles should be painted.
• Special Order products can only be ordered in case quantity
(4 gallons per case) or 5 gallon buckets based on availability.
• Home Depot offers a Pro Rewards Paint tier discount program
based on annual spend on paint purchases. For more information
contact the Pro desk at your local Home Depot store.
GLIDDEN EXTERIOR PAINT
Please Contact John D. Kidd Regional Pro Manager (630) 258-4693 for your nearest Glidden representative.
Color
Clark Light Grey
Clark Dark Grey
Clark Red
Clark Blue
Clark White
Glidden/Home Depot Exterior Gallon Formulas
Product
Colorant
BL
GL6811
GL6812
GL6812
GL6813
GL6811
CL
LL
Oz.
0
0
0
384th
312
36
200
Colorant
BL
DL
KXL
LL
Oz.
1
0
4
5
384th
372
144
196
68
Colorant
Oz.
KXL
2
LL
0
RUL
8
VL
0
384th
48
116
352
252
Colorant
CL
EL
JL
KXL
Oz.
0
12
1
1
384th
80
72
332
276
Ready Mix
Paint Product Material Data Sheets and MSDS sheets are available at www.gliddenprofessional.com or www.glidden.com.
You can find your nearest Home Depot store location at www.homedepot.com.
2.5
GLIDDEN INTERIOR PAINT
Please Contact John D. Kidd Regional Pro Manager (630) 258-4693 for your nearest Glidden representative.
Glidden/Home Depot Interior Gallon Formulas
Color
Product
Colorant
BL
CL
VL
Clark Light Grey
GLD3011
Oz.
1
0
0
384th
124
263
80
Colorant
BL
CL
DL
KXL
Oz.
7
2
0
0
384th
39
26
92
228
Colorant
Oz.
KXL
1
RL
12
VL
1
384th
270
222
276
Colorant
EL
JL
KXL
RL
Oz.
13
0
1
0
384th
63
323
117
264
Clark Dark Grey
Clark Red
Clark Blue
Clark White
GLD3012
GLD3013
GLD3013
GLD3000
Ready Mix
Paint Product Material Data Sheets and MSDS sheets are available at www.gliddenprofessional.com or www.glidden.com.
You can find your nearest Home Depot store location at www.homedepot.com.
2.6
VINYL COLORS AND APPLICATION INSTRUCTIONS
Storage
!
Unapplied marking may be stored for a period of up to one year. They
must be stored flat or wrapped on a core with at least a 5 inch diameter.
The markings must be stored in a clean area, free from excessive moisture
and direct sunlight, with ambient temperatures of 100 degrees or less.
CAUTION
An application surface that has been washed and dried, solvent wiped
and dried can still provide poor adhesion in the area of rivets and seams
due to liquid retention caused by capillary action. This problem can be
overcome by allowing a cleaned vehicle to sit overnight prior to
application of markings, or by the use of a heat gun to dry out retained
liquid. Any chalked paint residue must be removed in cleaning.
Surface Preparation
All surfaces must be considered contaminated and must be cleaned prior
to application of film or sheeting.
Surface Preparation
The recommended procedure is as follows:
The markings can be applied when air and application surface
temperatures are above the minimum specified in the following table.
Surfaces may be heated in order to raise the surface temperature above
the minimum specified in the following table. This may be accomplished
by portable heater, heat lamps, hot water or steam. If hot water or steam
is used, the surface must be thoroughly dry before application.
1. Paint system must be properly cured prior to application of films and
sheeting. Under cured paint can cause bubbling of the graphic. Markings
will not adhere to chalked paint. Chalking must be removed by physical
abrasion.
2. Wash the surface with a synthetic, free-rinsing detergent. Avoid
washing the surface with a soap containing creams or lotions. Allow to
dry.
3. Saturate clean paper towel with Solvent Cleaner 3919S and wipe the
substrate surface dry. Many cleaners and solvents cannot be used
effectively. For example, alcohol evaporates too rapidly and effective
cleaning does not take place.
4. Dry the surface with a lint-free paper towel before the solvent
evaporates.
Premium Grade Vinyl
2.7
LSI Graphic Solutions Ink Colors
Color
Part Number
Color
Ink Number
Clark
Clark
Clark
Clark
3M VZ-5490
3M VZ-3520
3M VZ-5491
Flexcon PLV-800
Clark Sapphire Blue
Clark Red
SG-604
SG-528
Sapphire Blue
Red
White
White Coat
Flat
Flat with Rivets
3M Controltac
Series 160, 180, 181
o
40 F
o
50 F
3M Scotch Cal
Series 3650, 3470 Plus
o
50 F
o
50 F
3M Scotch Print Film
Series 8620, 8640, 8650
o
40 F
o
40 F
Flexcon
PLV-800 FW
o
50 F
N/A
VINYL APPLICATION INSTRUCTIONS
Center Hinge Method
5
3
1
1. Tape marking into position with small
pieces of masking tape.
5. Fold over the other half of marking,
remove liner and apply as in steps
outlined.
3. Fold half of marking back over hinge,
peel liner off marking to tape hinge, cut
liner along hinge and discard.
2
4
2. Apply 1" or 2" tape hinge through
center of marking, either vertically or
horizontally.
NOTE: It is recommended that the
masking tape be placed perpendicular
to the long dimension of the marking.
2.8
4. Remove tape hinge.
VINYL APPLICATION INSTRUCTIONS
Split Liner Method
1
3
1. Place marking face down on a flat surface. Peal back and
cut off liner approximately 1/3 from one edge.
3. Apply marking along line of exposed adhesive. This will
now act as a hinge.
4
2
2. Replace liner paper on adhesive, plastic side down,
exposing about 1" - 2" of adhesive.
2.9
4. Remove the liner and apply the marking using the same
technique as the center hinge method.
VINYL APPLICATION INSTRUCTIONS
Small Prespaced Markings
1
1. Remove liner, then position legend on application
surface placing top corners of prespacing tape on
registry marks.
2
2. Using firm initial squeegee pressure, begin at top center
of marking and work downward and out toward edges.
2.10
VINYL APPLICATION INSTRUCTIONS
Large Prespaced Markings
1
1. Align legend on application surface and tape into position using top horizontal hinge method.
CAUTION: When applying prespaced letters and numbers, the entire prespacing tape
must be squeegeed onto surface to avoid wrinkles and misalignment of the marking beneath.
2
2. Cut between each letter or number so that each is independently hinged from top. Remove
liner, then squeegee each letter or number into place using firm pressure.
2.11
BUILDING ELEMENTS
Contents
Building Fascia Logo
Building Logo Placement
Entry Door Decals
3.0
3.1
3.2
3.3
BUILDING AND CANOPY FASCIA LOGOS
83”
27.55"
17"
Item No. 360351
Item No. 370554
70.75"
These products are ordered as a separate items, the preferred installation requires one of each to complete the set. Site specific conditions
may not allow for use of both Speed Lines and Logo. In this event, seek approval from your Clark representative to install the logo only.
Product
Application
Pre-spaced vinyl with self-adhesive backing.
Apply vinyl logo and speed lines to canopy fascia after
the fascia surface is filmed over per instructions included
in this manual.
Clark Red - Speed Lines
Clark White - Clark Logo
Order in quantities necessary to complete site specific
requirements.
3.1
BUILDING AND CANOPY LOGO PLACEMENT
Typical Left Building Fascia Elevation
Building Front
18"
5"
Typical Right Building Fascia Elevation
Speed Lines
Building Logo
Item No. 360351
Item No. 370554
Building Front
5"
18"
Speed Lines
Typical Front Building Fascia Elevation
Building Logo
Centerline of Building Fascia = Centerline of "Clark" Decal
5"
Speed Lines
*See page 4.2 for information on Clark color vinyl for film over.
3.2
Building Logo
ENTRY DOOR DECALS
32.000"
6.000"
Item No. 522170 (front side)
Item No. 522170 (back side)
7.000"
Product
Credit Card / Thank You Decal - Vinyl with double faced
silkscreened image and self-adhesive backing.
1.000"
Item No. 169261
(This decal is optional)
No Solicitation Decal
"Credit Card" Decal with
"Thank You" Decal on
opposite side
Application
Clean glass surface thoroughly. Install per vinyl installation
instructions in this manual.
Position decal on right hand entry door with a 2" space
between the door handle and the decal. Place above any
door handles which cross the entire glass area.
N O S OLICITATION
Door Handle (strike side)
The preferred installation is on double door entries as
shown.
This decal may be placed above the credit card decal on
single entry doors insuring critical vision paths are not
3.3
CANOPY ELEMENTS
Contents
Canopy Overview
Filmover Graphics
Illuminated Canopy Logo
Canopy Logo Placement
Canopy Clearance Decals
4.0
4.1
4.2
4.3
4.4
4.5
CANOPY
Fascia Film
Logo Options
Dispenser Products
4.1
FILMOVER GRAPHICS
48"
48"
8"
Clark Red - used on all canopies
Item No. 360350
42"
Product
Vinyl with self-adhesive backing.
Application
Clark Sapphire Blue - used on 4ʼ canopies
Item No. 169295
48"
30"
Clark Sapphire Blue - used on 3ʼ canopies
Item No. 103208
4.2
Vinyl sheets are to be ordered in quantities sufficient to
cover fascia and meet site specific conditions. Clean all
surfaces thoroughly, sand and prime any rusted areas.
Install per vinyl installation instructions in this manual.
Refer to the canopy or building fascia details in this
manual for additional information regarding this material.
Please note, when ordering these items for fascia that is
corrugated, add 10% to the overall length of the fascia to
accommodate this additional surface area.
ILLUMINATED CANOPY FASCIA LOGO
Internally illuminated logo sign and speed lines.
For use on canopy fascia where
municipal sign code allows.
76.25"
"
8.00
18.50"
Item No. 360351
Sign provided by others
Order “Speed Lines" - Item No. 360351
Refer to placement details for additional information regarding this sign.
Product
18.5"H x 76.25"L x 8" Deep canopy logo.
Background - Sapphire Blue
Drop Shadow - Light Blue
Clark Copy - White
Application
Special Note
Install speed lines as detailed in this manual.
Permit requirements of local municipalities may prohibit
use of this sign. Prior to placing an order for this sign,
insure your local sign ordinance permits its use.
Flush mount to canopy face using fasteners suitable for
existing canopy structure. Locate the fasteners to line up
with existing support structure of the canopy. Do not
fasten through the face of canopy.
4.3
CANOPY LOGO PLACEMENT
81 1/4"
63 1/4"
18"
76 1/4"
18"
41 1/8"
Refer to page 4.3 for
overall dimensions and
placement requirements
18 1/2"
6"
Speed Lines
Illuminated Canopy Logo
Item No. 360351
Supplied by others
81 1/4"
63 1/4"
18"
Street
70 3/4"
18"
17"
6"
Speed Lines
Non-illuminated Canopy Logo
Item No. 360351
Item No. 370554
Logo
4.4
Logo
Logo
primary street
limited
visibility
Canopy
Logo
primary street
one way
Logo
street
Canopy
Logo
primary street
Logo
secondary
Canopy
Possible placement if visibility
is limited or primary street
is one way
street
If secondary street logo
is necessary
Preferred logo placement
secondary
Street
CLEARANCE DECALS
If your canopy clearance is greater than 13'-6", use the 13'-6" clearance decal.
8"
2 3/4"
3 1/2"
5 1/2"
3 3/4"
Item No. 169463
Product
Vinyl with pre-spaced computer cut letters applied.
4.5
DISPENSER DECALS
Contents
Dispenser Decal Overview
Dispenser Decal Kits
Dresser Wayne Ovation
Dresser Wayne 590
Dresser Wayne 360/370 Single Product
Dresser Wayne 360/370 Dual Product
Dresser Wayne Single Hose
Dresser Wayne Dual Hose
Gilbarco Eclipse
Gilbarco Encore
Tokheim MPD
Tokheim 422B
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.11
5.12
DISPENSER DECAL OVERVIEW
Valance Graphic Kit
Pump No. Decal
Warning/No Smoking Decal
(Alternative - inside riser)
Valance Graphic Kit
SAFETY AND HEALTH WARNING
Follow These Warnings.
Failure To Do So Could Cause
Serious Injury Or Death.
Unleaded
Gasoline
Contains
Ethanol
Decal
Warning/No Smoking Decal
(Alternative - column face)
Unleaded
Gasoline
Only
*Credit Card Decal
*Shut Off Decal
1
QZ
4
GHI
7
2
ABC
5
JKL
8
3
Pay
Inside
MNO
6
Pay
Here
Credit
Pay
Here
ATM/Debit
9
Help
Cancel
Enter
Yes
No
DEF
PRS
TUV
WXY
Clear
0
Health
Warning
Grade Decal
*AVS Decal
Octane Decals
Clark Decal
150ppi
Universal Dispenser Skirt
150ppi
*Decal is placed near the price readout area of the dispenser.
5.1
DISPENSER DECAL KITS
1
QZ
4
GHI
7
89
2
ABC
5
JKL
8
3
Pay
Inside
MNO
6
Pay
Here
Credit
Pay
Here
ATM/Debit
9
Help
Cancel
Enter
Yes
No
DEF
PRS
TUV
WXY
Clear
0
91
150ppi
Dresser Wayne Ovation
Dresser Wayne 590
Dresser Wayne 360/370
Single Product
150ppi
150ppi
Dresser Wayne 360/370
Dual Product
Dresser Wayne Single Hose
UNLEADED
GASOLINE
UNLEADED
GASOLINE
UNLEADED
GASOLINE
CONTAINS TEN PERCENT
ETHANOL PLUS DETERGENTS
CONTAINS TEN PERCENT
ETHANOL PLUS DETERGENTS
CONTAINS TEN PERCENT
ETHANOL PLUS DETERGENTS
FOR USE AS A
MOTOR FUEL ONLY
FOR USE AS A
FOR USE AS A
UNLEADED
MOTOR FUEL ONLY
UNLEADED
MOTOR FUEL ONLY
UNLEADED
GASOLINE
GASOLINE
GASOLINE
HEALTH WARNING
GASOLINE
Harmful or fatal if swallowed
HEALTH WARNING
GASOLINE
Long-term exposure to vapors has caused
HEALTH WARNING
GASOLINE
cancer in laboratory animals.
Harmful or fatal if swallowed
ï Avoid prolonged breathing of vapors.
Long-term exposure to vapors has caused
cancer in laboratory animals.
ï Avoid prolonged breathing of vapors.
ï Keep face away from nozzle and gas tank/
2
ABC
5
7
8
GHI
PRS
Clear
JKL
TUV
0
3
Help
6
Cancel
DEF
MNO
9
WXY
Enter
PRESS
U
UNLEADED
NLEADED
EXTRA
XTRA
E
PREMIUM
1
QZ
4
92
89
87
PREMIUM
92 89 87
EXTRA
XTRA
UNLEADED
150ppi
Dresser Wayne Dual Hose
5.2
Gilbarco Eclipse
Gilbarco Encore
Tokheim MPD
Tokheim 422B
DRESSER WAYNE OVATION
Dispenser Kit
Preparation
205397
205371
Remove all existing decals and thoroughly clean all surfaces. Clean any
painted skirts and bonnets. Sand all edges, copy and scratches from the
surface. Sand any rusted areas and prime surface prior to decal application.
375612
Wipe surfaces with dry towel and then apply vinyl.
†
N/A
†
N/A
For Universal Pump Skirt, apply solid film and trim to fit. Apply Clark logos to
†
N/A
the skirts as illustrated. For the Valance, apply film on 4 sides as shown. Then
Application
apply pump numbers, product ID's, octane decals, credit card decals, and
regulatory decals as illustrated.
531368
Kit Components
531369
522197
Item No. Qty
Description
103195
2
38"x55" Universal Pump Skirt
4.875"x20.285" Clark Logo For Pump Skirt
481412
528697
Octane
103108
150ppi
103195
Notes on Dispenser Graphics
•
Graphics are available for all dispenser types
•
Choose appropriate octane and product decals for site specific
103108
2
481412
2
Product IDs for 3 Grade Dispenser
528697
2
Product ID for Diesel Panel
375612
1
4 pc. Valance Graphic Kit
522197
2
Credit Card Decal
291810
1
Warning/No Smoking Decal
531368
2
3.5"x5.5" AVS Decal
531369
2
3.5"x5.5" Shut Off Decal
Octane
*
For Octane Decals, see page 8.1 for all ratings available
N/A
Order from Decal Catalog Company
†
N/A
requirements. You will typically use two product ID's and two
of each of the required octane decals per dispenser.
•
Place Credit Card decal, AVS decal and Shut Off decal near
the price readout of the dispensers.
•
Use 4.8" Clark Logos unless space is limited, then use smaller
Logos (see page 8.2 for detail).
* Number sets to be ordered as a separate item. Quantities are site
specific and should be ordered to meet site specific requirements.
5.3
Required Items Ordered Separately
Item No. Qty
Description
205397
*
3" Bonnett/Pump Number Set 1-12
205371
*
3" Bonnett/Pump Number Set 13-24
DRESSER WAYNE 590 Dispenser Kit
Preparation
205397
205371
375612
Remove all existing decals and thoroughly clean all surfaces. Clean any
painted skirts and bonnets. Sand all edges, copy and scratches from the
surface. Sand any rusted areas and prime surface prior to decal application.
Wipe surfaces with dry towel and then apply vinyl.
†
N/A
N/A
†N/A
†
Application
For Universal Pump Skirt, apply solid film and trim to fit. Apply Clark logos to
the skirts as illustrated. For the Valance, apply film on 4 sides as shown. Then
apply pump numbers, product ID's, octane decals, credit card decals, and
522197
531369
169447
169455
regulatory decals as illustrated.
1
QZ
4
GHI
7
2
ABC
5
JKL
8
3
Pay
Inside
MNO
6
Pay
Here
Credit
Pay
Here
ATM/Debit
9
Help
Cancel
Enter
Yes
No
DEF
PRS
TUV
WXY
Clear
0
Kit Components
531368
Octane
150ppi
103108
103195
Notes on Dispenser Graphics
•
Graphics are available for all dispenser types
•
Choose appropriate octane and product decals for site specific
Item No. Qty
Description
103195
38”x55” Universal Pump Skirt
2
103108
2
4.875"x20.285" Clark Logo For Universal Pump Skirt
169447
1
3.125"x41.625" Product ID (RH)
169455
1
3.125"x41.625" Product ID (LH)
375612
1
4 pc. Valance Graphic Kit
522197
2
Credit Card Decal
291810
1
Warning/No Smoking Decal
531368
2
3.5"x5.5" AVS Decal
531369
2
3.5"x5.5" Shut Off Decal
Octane
*
For Octane Decals, see page 8.1 for all ratings available
N/A
Order from Decal Catalog Company
†
N/A
requirements. You will typically use two product ID's and two
of each of the required octane decals per dispenser.
•
Place Credit Card decal, AVS decal and Shut Off decal near
the price readout of the dispensers.
•
Use 4.8" Clark Logos unless space is limited, then use smaller
Logos (see page 8.2 for detail).
* Number sets to be ordered as a separate item. Quantities are site
specific and should be ordered to meet site specific requirements.
5.4
Required Items Ordered Separately
Item No. Qty
Description
205397
*
3" Bonnett/Pump Number Set 1-12
205371
*
3" Bonnett/Pump Number Set 13-24
DRESSER WAYNE 360/370 SINGLE PRODUCT Dispenser Kit
Preparation
Remove all existing decals and thoroughly clean all surfaces. Clean any
531368 Octane
painted skirts and bonnets. Sand all edges, copy and scratches from the
surface. Sand any rusted areas and prime surface prior to decal application.
466428
Wipe surfaces with dry towel and then apply vinyl.
531369
522197
Application
†
169375
150ppi
N/A
†
N/A
†
N/A
For Universal Pump Skirt, apply solid film and trim to fit. Apply Clark logos to
the skirts as illustrated. Then apply pump numbers, product ID's, octane
decals, credit card decals, and regulatory decals as illustrated.
Kit Components
Item No. Qty
Description
103145
2
43”x36” Universal Pump Skirt
169375
2
3"x13.12" Clark Logo For Pump Skirt
466428
*
3.5"x15" Set of 3 Adaptable Product IDs
522197
2
Credit Card Decal
291810
1
Warning/No Smoking Decal
531368
2
3.5"x5.5" AVS Decal
531369
2
3.5"x5.5" Shut Off Decal
Octane
*
For Octane Decals, see page 8.1 for all ratings available
N/A
Order from Decal Catalog Company
103145
†
N/A
Notes on Dispenser Graphics
•
Graphics are available for all dispenser types
•
Choose appropriate octane and product decals for site specific
requirements. You will typically use two product ID's and two
of each of the required octane decals per dispenser.
•
Place Credit Card decal, AVS decal and Shut Off decal near
the price readout of the dispensers.
•
Use 4.8" Clark Logos unless space is limited, then use smaller
Logos (see page 8.2 for detail).
* Number sets to be ordered as a separate item. Quantities are site
specific and should be ordered to meet site specific requirements.
5.5
Required Items Ordered Separately
Item No. Qty
Description
205397
*
3" Bonnett/Pump Number Set 1-12
205371
*
3" Bonnett/Pump Number Set 13-24
DRESSER WAYNE 360/370 DUAL PRODUCT
Dispenser Kit
Preparation
Remove all existing decals and thoroughly clean all surfaces. Clean any
531368 Octane
painted skirts and bonnets. Sand all edges, copy and scratches from the
surface. Sand any rusted areas and prime surface prior to decal application.
466428
Wipe surfaces with dry towel and then apply vinyl.
531369
522197
Application
†
169375
150ppi
103145
N/A
†
N/A
†
N/A
For Universal Pump Skirt, apply solid film and trim to fit. Apply Clark logos to
the skirts as illustrated. Then apply pump numbers, product ID's, octane
decals, credit card decals, and regulatory decals as illustrated.
Kit Components
Item No. Qty
Description
103145
2
43”x36” Universal Pump Skirt
3"x13.12" Clark Logo For Pump Skirt
169375
2
466428
2
3.5"x15" Set of 3 Adaptable Product IDs
522197
2
Credit Card Decal
291810
1
Warning/No Smoking Decal
531368
2
3.5"x5.5" AVS Decal
531369
2
3.5"x5.5" Shut Off Decal
Octane
*
For Octane Decals, see page 8.1 for all ratings available
N/A
Order from Decal Catalog Company
†
N/A
Notes on Dispenser Graphics
•
Graphics are available for all dispenser types
•
Choose appropriate octane and product decals for site specific
requirements. You will typically use two product ID's and two
of each of the required octane decals per dispenser.
•
Place Credit Card decal, AVS decal and Shut Off decal near
the price readout of the dispensers.
•
Use 4.8" Clark Logos unless space is limited, then use smaller
Logos (see page 8.2 for detail).
* Number sets to be ordered as a separate item. Quantities are site
specific and should be ordered to meet site specific requirements.
5.6
Required Items Ordered Separately
Item No. Qty
Description
205397
*
3" Bonnett/Pump Number Set 1-12
205371
*
3" Bonnett/Pump Number Set 13-24
DRESSER WAYNE SINGLE HOSE
Dispenser Kit
Preparation
Remove all existing decals and thoroughly clean all surfaces. Clean any
466428
painted skirts and bonnets. Sand all edges, copy and scratches from the
surface. Sand any rusted areas and prime surface prior to decal application.
Wipe surfaces with dry towel and then apply vinyl.
Application
Octane
†
N/A
522197
169375
531369
531368
150ppi
103145
†
N/A
†
N/A
For Universal Pump Skirt, apply solid film and trim to fit. Apply Clark logos to
the skirts as illustrated. Then apply pump numbers, product ID's, octane
decals, credit card decals, and regulatory decals as illustrated.
Kit Components
Item No. Qty
Description
103145
2
43”x36” Universal Pump Skirt
169375
2
3"x13.12" Clark Logo For Pump Skirt
466428
2
3.5"x15" Set of 3 Adaptable Product IDs
522197
2
Credit Card Decal
291810
1
Warning/No Smoking Decal
531368
2
3.5"x5.5" AVS Decal
531369
2
3.5"x5.5" Shut Off Decal
Octane
*
For Octane Decals, see page 8.1 for all ratings available
N/A
Order from Decal Catalog Company
†
N/A
Notes on Dispenser Graphics
•
Graphics are available for all dispenser types
•
Choose appropriate octane and product decals for site specific
requirements. You will typically use two product ID's and two
of each of the required octane decals per dispenser.
•
Place Credit Card decal, AVS decal and Shut Off decal near
the price readout of the dispensers.
•
Use 4.8" Clark Logos unless space is limited, then use smaller
Logos (see page 8.2 for detail).
* Number sets to be ordered as a separate item. Quantities are site
specific and should be ordered to meet site specific requirements.
5.7
Required Items Ordered Separately
Item No. Qty
Description
205397
*
3" Bonnett/Pump Number Set 1-12
205371
*
3" Bonnett/Pump Number Set 13-24
DRESSER WAYNE DUAL HOSE
Dispenser Kit
Preparation
Remove all existing decals and thoroughly clean all surfaces. Clean any
466428
painted skirts and bonnets. Sand all edges, copy and scratches from the
surface. Sand any rusted areas and prime surface prior to decal application.
Wipe surfaces with dry towel and then apply vinyl.
Application
Octane
†
522197
531369
531368
169375
150ppi
103145
N/A
†
N/A
†
N/A
For Universal Pump Skirt, apply solid film and trim to fit. Apply Clark logos to
the skirts as illustrated. Then apply pump numbers, product ID's, octane
decals, credit card decals, and regulatory decals as illustrated.
Kit Components
Item No. Qty
Description
103145
2
43”x36” Universal Pump Skirt
3"x13.12" Clark Logo For Pump Skirt
169375
2
466428
2
3.5"x15" Set of 3 Adaptable Product IDs
522197
2
Credit Card Decal
291810
1
Warning/No Smoking Decal
531368
2
3.5"x5.5" AVS Decal
531369
2
3.5"x5.5" Shut Off Decal
Octane
*
For Octane Decals, see page 8.1 for all ratings available
N/A
Order from Decal Catalog Company
†
N/A
Notes on Dispenser Graphics
•
Graphics are available for all dispenser types
•
Choose appropriate octane and product decals for site specific
requirements. You will typically use two product ID's and two
of each of the required octane decals per dispenser.
•
Place Credit Card decal, AVS decal and Shut Off decal near
the price readout of the dispensers.
•
Use 4.8" Clark Logos unless space is limited, then use smaller
Logos (see page 8.2 for detail).
* Number sets to be ordered as a separate item. Quantities are site
specific and should be ordered to meet site specific requirements.
5.8
Required Items Ordered Separately
Item No. Qty
Description
205397
*
3" Bonnett/Pump Number Set 1-12
205371
*
3" Bonnett/Pump Number Set 13-24
GILBARCO ECLIPSE
Dispenser Kit
Preparation
Remove all existing decals and thoroughly clean all surfaces. Clean any
painted skirts and bonnets. Sand all edges, copy and scratches from the
surface. Sand any rusted areas and prime surface prior to decal application.
Wipe surfaces with dry towel and then apply vinyl.
Application
For Universal Pump Skirt, apply solid film and trim to fit. Apply Clark logos to
the skirts as illustrated. Then apply pump numbers, product ID's, octane
†
N/A
†
N/A
N/A
†
205341
205370
522197
Octane
531369
531368
150ppi
169375
103145
decals, credit card decals, and regulatory decals as illustrated.
Kit Components
Item No. Qty
Description
103145
43”x36” Universal Pump Skirt
2
169375
2
3"x13.12" Clark Logo For Pump Skirt
205341
2
Product IDs for 3 Grade Dispenser
205370
2
Product IDs for 4 Grade Dispenser
522197
2
Credit Card Decal
291810
1
Warning/No Smoking Decal
531368
2
3.5"x5.5" AVS Decal
531369
2
3.5"x5.5" Shut Off Decal
Octane
*
For Octane Decals, see page 8.1 for all ratings available
N/A
Order from Decal Catalog Company
†
N/A
Notes on Dispenser Graphics
•
Graphics are available for all dispenser types
•
Choose appropriate octane and product decals for site specific
requirements. You will typically use two product ID's and two
of each of the required octane decals per dispenser.
•
Place Credit Card decal, AVS decal and Shut Off decal near
the price readout of the dispensers.
•
Use 4.8" Clark Logos unless space is limited, then use smaller
Logos (see page 8.2 for detail).
* Number sets to be ordered as a separate item. Quantities are site
specific and should be ordered to meet site specific requirements.
5.9
Required Items Ordered Separately
Item No. Qty
Description
205397
*
3" Bonnett/Pump Number Set 1-12
205371
*
3" Bonnett/Pump Number Set 13-24
GILBARCO ENCORE
Dispenser Kit
Preparation
205397
205371
Remove all existing decals and thoroughly clean all surfaces. Clean any
painted skirts and bonnets. Sand all edges, copy and scratches from the
surface. Sand any rusted areas and prime surface prior to decal application.
375612
Wipe surfaces with dry towel and then apply vinyl.
†
N/A
†
N/A
†
N/A
Application
For Universal Pump Skirt, apply solid film and trim to fit. Apply Clark logos to
the skirts as illustrated. For the Valance, apply film on 4 sides as shown. Then
apply pump numbers, product ID's, octane decals, credit card decals, and
regulatory decals as illustrated.
205367
1
QZ
2
ABC
4
5
7
8
GHI
PRS
522197
531368
Kit Components
Octane
531369
Clear
JKL
TUV
0
3
Help
6
Cancel
DEF
MNO
9
WXY
Enter
PRESS
103108
150ppi
103195
Item No. Qty
Description
103195
2
28”x55” Universal Pump Skirt
103108
2
4.875"x20.285" Clark Logo For Pump Skirt
205367
2
6pc. PID Set
522197
2
Credit Card Decal
291810
1
Warning/No Smoking Decal
531368
2
3.5"x5.5" AVS Decal
531369
2
3.5"x5.5" Shut Off Decal
Octane
*
For Octane Decals, see page 8.1 for all ratings available
N/A
Order from Decal Catalog Company
†
N/A
Notes on Dispenser Graphics
•
Graphics are available for all dispenser types
•
Choose appropriate octane and product decals for site specific
requirements. You will typically use two product ID's and two
of each of the required octane decals per dispenser.
•
Place Credit Card decal, AVS decal and Shut Off decal near
the price readout of the dispensers.
•
Use 4.8" Clark Logos unless space is limited, then use smaller
Logos (see page 8.2 for detail).
* Number sets to be ordered as a separate item. Quantities are site
specific and should be ordered to meet site specific requirements.
5.10
Required Items Ordered Separately
Item No. Qty
Description
205397
*
3" Bonnett/Pump Number Set 1-12
205371
*
3" Bonnett/Pump Number Set 13-24
TOKHEIM MPD
Dispenser Kit
205397
205371
Preparation
Remove all existing decals and thoroughly clean all surfaces. Clean any
painted skirts and bonnets. Sand all edges, copy and scratches from the
375612
surface. Sand any rusted areas and prime surface prior to decal application.
†
N/A
Wipe surfaces with dry towel and then apply vinyl.
†
N/A
†
N/A
Application
For Universal Pump Skirt, apply solid film and trim to fit. Apply Clark logos to
the skirts as illustrated. For the Valance, apply film on 4 sides as shown. Then
apply pump numbers, product ID's, octane decals, credit card decals, and
531369
531368
522197
169367
Octane
regulatory decals as illustrated.
Kit Components
92
89
87
103108
150ppi
103195
Item No. Qty
Description
103195
2
38”x55” Universal Pump Skirt
103108
2
4.875"x20.285" Clark Logo For Pump Skirt
169367
*
3.125"x13.375" Product ID Set
375612
1
4 pc. Valance Graphic Kit
522197
2
Credit Card Decal
291810
1
Warning/No Smoking Decal
531368
2
3.5"x5.5" AVS Decal
531369
2
3.5"x5.5" Shut Off Decal
Octane
*
For Octane Decals, see page 8.1 for all ratings available
N/A
Order from Decal Catalog Company
†
N/A
Notes on Dispenser Graphics
•
Graphics are available for all dispenser types
•
Choose appropriate octane and product decals for site specific
requirements. You will typically use two product ID's and two
of each of the required octane decals per dispenser.
•
Place Credit Card decal, AVS decal and Shut Off decal near
the price readout of the dispensers.
•
Use 4.8" Clark Logos unless space is limited, then use smaller
Logos (see page 8.2 for detail).
* Number sets to be ordered as a separate item. Quantities are site
specific and should be ordered to meet site specific requirements.
5.11
Required Items Ordered Separately
Item No. Qty
Description
205397
*
3" Bonnett/Pump Number Set 1-12
205371
*
3" Bonnett/Pump Number Set 13-24
TOKHEIM H422B Dispenser Kit
205397
205371
Preparation
Remove all existing decals and thoroughly clean all surfaces. Clean any
375612
painted skirts and bonnets. Sand all edges, copy and scratches from the
surface. Sand any rusted areas and prime surface prior to decal application.
†
N/A
†
N/A
N/A
†
Wipe surfaces with dry towel and then apply vinyl.
Application
For Universal Pump Skirt, apply solid film and trim to fit. Apply Clark logos to
the skirts as illustrated. For the Valance, apply film on 4 sides as shown. Then
apply pump numbers, product ID's, octane decals, credit card decals, and
531369
regulatory decals as illustrated.
531368
522197
198299
92 89 87
Kit Components
Octane
103108
150ppi
103195
Item No. Qty
Description
103195
2
38”x55” Universal Pump Skirt
103108
2
4.875"x20.285" Clark Logo For Pump Skirt
198299
*
3.125"x13.375" Product ID
375612
1
4 pc. Valance Graphic Kit
522197
2
Credit Card Decal
291810
1
Warning/No Smoking Decal
531368
2
3.5"x5.5" AVS Decal
531369
2
3.5"x5.5" Shut Off Decal
Octane
*
For Octane Decals, see page 8.1 for all ratings available
N/A
Order from Decal Catalog Company
†
N/A
Notes on Dispenser Graphics
•
Graphics are available for all dispenser types
•
Choose appropriate octane and product decals for site specific
requirements. You will typically use two product ID's and two
of each of the required octane decals per dispenser.
•
Place Credit Card decal, AVS decal and Shut Off decal near
the price readout of the dispensers.
•
Use 4.8" Clark Logos unless space is limited, then use smaller
Logos (see page 8.2 for detail).
* Number sets to be ordered as a separate item. Quantities are site
specific and should be ordered to meet site specific requirements.
5.12
Required Items Ordered Separately
Item No. Qty
Description
205397
*
3" Bonnett/Pump Number Set 1-12
205371
*
3" Bonnett/Pump Number Set 13-24
PUMP SKIRT DECALS
Contents
Universal Pump Skirt Decals
Item No. 169615 & 169480
6.0
6.1
6.2
UNIVERSAL PUMP SKIRTS
Clark Logo
(Logo is applied 2”
36.000"
55.000"
from top and 2”
from left side)
38"
43"
38"H x 55"W Universal Pump Skirt
43"H x 36"W Universal Pump Skirt
Item No. 103195
Item No. 103145
Dispenser Skirt
Sapphire Blue vinyl decal.
Preparation
Remove all existing decals and thoroughly clean all surfaces. Sand all
edges, copy and scratches from the surface. Sand any rusted areas and
prime surface prior to decal application. Install per vinyl installation
instructions in this manual.
Application
*Logos and Decals purchased separately, see pages 8.1 and 8.2.
for additional logo decal information.
6.1
These dispenser skirts may be trimmed in the field to fit any
dispenser models within the recommended
ranges indicated.
DIESEL PUMP SKIRTS
5.000"
169615
43"H x 36"W
Universal Pump Skirt
Item No. 103145
*Logos and Decals purchased separately, see pages 8.1 and 8.2.
for additional logo decal information.
6.2
DISPENSER PRODUCT PANELS
Contents
Dispenser Product Panel Overview
Dresser Wayne Ovation
Dresser Wayne 590
Gilbarco Eclipse
Gilbarco Encore
Tokheim H422B and MPD
Adaptable Product ID
Diesel
7.0
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
DISPENSER PRODUCT PANEL OVERVIEW
Dresser Wayne Ovation
Item No. 481412 3 Product Panel
Item No. 528697 Diesel Panel
Gilbarco Encore
Item No. 205367, 209418
3.5” x 15” Adaptable Product ID
Dresser Wayne 360 and 370 Dual Product
Dresser Wayne Single Product
Bennett 3000
Gilbarco Highline 111B
Single Hose Front Mount
Dual Hose Front Mount
Item No. 466428
*Trim to fit
Dresser Wayne 590
Item No. 169447, 169455
3.25” x 5.75” Adaptable Product ID
Item No. 378695
*Trim to fit
PUSH
TO
START
NLEADED
$
PREMIUM
PUSH
TO
START
$
$
EXTRA
PRICE PER GALLON
Tokheim H422B
Item No. 198299
7.1
PREMIUM
PRICE PER GALLON
EXTRA
PUSH
TO
START
UNLEADED
PRICE PER GALLON
Tokheim MPD
Item No. 169367
Gilbarco Eclipse
Item No. 205370, 205341
Diesel
Item No. 169615
DRESSER WAYNE OVATION
8.020"
8.020"
0.525"
2.660"
2.660"
2.660"
2.660"
2.660"
0.525"
2.660"
3 Product
Diesel Panel
Item No. 481412
Item No. 528697
Product
Vinyl with first surface silkscreened copy and background
with self-adhesive backing.
Application
Install on dispensers per vinyl installation instructions in
this manual (pg. 2.7).
7.2
DRESSER WAYNE 590
41 5/8"
3 7/16"
3 7/16"
10 1/2"
10 1/2"
10 1/2"
7 3/4"
4 3/4"
7 1/4"
3 1/8" 1 1/2"
Item No. 169447
Item No. 169455
Only use vinyl decals if existing product panels
are non-illuminated.
Product
Vinyl with first surface silkscreened copy and background
with self-adhesive backing.
Application
Install on dispensers per vinyl installation instructions in
this manual (pg. 2.7).
7.3
GILBARCO ECLIPSE
1.121"
1.123"
1.088"
1.916"
1.916"
1.086"
1.125"
1.916"
1.083"
1.112"
1.916"
1.112"
.836"
5.727" 0.571"
2.625"
.680"
2.767"
.678"
.701"
4.125"
2.767"
.657"
.722"
2.767"
.636"
.687"
4.125"
4.125"
2.767"
.687"
4.140"
4 Product
Item No. 205370
1.916"
1.916"
1.916"
Product
Vinyl with first surface
silkscreened
copy
and
background with self-adhesive
backing.
0.836"
Application
5.727" 0.571"
Install on dispensers per vinyl
installation instructions in this
manual (pg. 2.7).
2.625"
1.582"
2.767"
5.705"
3 Product
Item No. 205341
7.4
1.356"
1.400"
2.767"
1.400"
1.360"
2.767"
1.570"
GILBARCO ENCORE
SIDE 1
SIDE 1
14.219"
1.858"
14.216"
1.875"
0.750"
0.812"
0.937"
2.562"
2.562"
0.277"
SIDE 2
SIDE 2
14.872"
14.852"
1.875"
0.750"
0.812"
0.937"
2.562"
2.562"
0.277"
7.5
5.468"
5.468"
5.468"
3.636"
3 Product
4 Product
Item No. 205367
Item No. 209418
3.636"
3.636"
5.406"
Product
Application
Vinyl with first surface silkscreened copy and background
with self-adhesive backing.
Install on dispensers per vinyl installation instructions in
this manual (pg. 2.7).
TOKHEIM H422B AND MPD
13 3/8"
13 3/8"
12 1/4"
12 1/4"
5 1/4"
3 1/8"
5 1/4"
1 3/8" 1"
Tokheim H422B
Tokheim MPD
Item No. 198299
Item No. 169367
Product
Vinyl with first surface silkscreened copy and background
with self-adhesive backing.
Application
Install on dispensers per vinyl installation instructions in
this manual (pg. 2.7).
7.6
PUMP SKIRT DECALS
ADAPTABLE PRODUCT ID
5.750"
15.000"
3.500"
.975"
3.250" .704"
Item No. 466428
Item No. 378695
Product
Vinyl with first surface silkscreened copy and background
with self-adhesive backing.
Application
Install on dispensers per vinyl installation instructions in
this manual (pg. 2.7). Trim to fit.
7.7
DIESEL DECALS
22 1/8"
7"
3"
2 1/4"
Item No. 169615
Product
Vinyl with first surface silkscreened copy and background
with self-adhesive backing.
Application
1. Remove all existing decals and thoroughly clean all
surfaces.
2. Clean all painted areas and sand all edges, copy and
scratches from the surface.
3. Sand any rusted areas and prime surface prior to
decal application.
4. Use with appropriate dispenser skirts (page 6.2).
7.8
MISCELLANEOUS DECALS
Contents
Octane Decals
Unleaded Gasoline Decal
Health Warning Decal
Warning/No Smoking Decal
Dispenser Credit Card Decal
AVS Decal
Shut Off Decal
Valance Graphic Decal Kit
Clark Logo Decals
Dispenser Numbering Decal Sets
8.0
8.1
8.1
8.1
8.1
8.2
8.2
8.2
8.2
8.2
8.2
REGULATORY DECALS
3"
7 1/4"
Quantities of
this product
are site
2 1/2" specific and
should be
1 3/8"
ordered to
meet those
requirements.
Item No. J036414
Minimum Octane
Decal 89
3/8"
Item No. J036413
Minimum Octane
Decal 87
Item No. 208792
Minimum Octane
Decal 88
SAFETY AND HEALTH WARNING
Follow These Warnings.
Failure To Do So Could Cause
Serious Injury Or Death.
14 1/4"
Item No. 190078
Minimum Octane
Decal 90
Item No. J020207F
Minimum Octane
Decal 91
Item No. J037653
Minimum Octane
Decal 92
Item No. J036415
Minimum Octane
Decal 93
150ppi
Product
Vinyl with first surface silkscreened image. Self-adhesive backing.
Application
These decals are to be installed on each dispenser as described on the individual dispenser
pages of this manual.
8.1
Item No. 291810
(1) ea. per dispenser.
DISPENSER DECALS
Product
Vinyl with first surface silkscreened image and self-adhesive backing.
Product
Vinyl with first surface silkscreened image and self-adhesive backing.
36”
60"
Background w/ Speedlines & Hallmark Logo
Item No. 375597
3.5”
.75”
Credit Card Decal
5.5"
3.5”
AVS Decal
Item No. 522197
13"
13"
5.5"
5.9"
Item No. 531368
Shut Off Decal
Item No. 531369
These decals are intended for use on dispensers with card readers and their use is site specific.
When ordering, include quantities sufficient to fulfill the site needs.
Solid Background
Item No. 375596
Application
Valance Graphics 4 pc. Kit
Includes (2) of each product shown.
Clean all surfaces thoroughly. Sand and prime any rusted areas. Apply vinyl decal to the required
area of the dispenser following the vinyl application instructions shown in this manual. Place the
Credit Card decal directly above or below any automatic card reader (CRIND) units. For dispenser
without CRIND units, usage of this decal is optional.
Item No. 375612
Application
Dispenser numbers are site specific and must be installed to meet needs.
Placement of the numbers are unique to each dispenser model. See guidelines
below for installation on Wayne Ovation and Vista 390 dispensers. For other
models, refer to the specific dispenser model page for placement of the decals.
for Wayne “Ovation” Valance
Product
White vinyl pre-spaced lettering with self adhesive
backing.
13.12"
20.285"
4.875"
3"
Valance face: 10” x 76”w.
Dispenser Skirt
Logo Decal
1.5"
Item No. 169375
Dispenser Skirt
Logo Decal
Item No. 103108
Application
Tip of “Speedlines” should align with top and bottom edges of pump valance.
Position graphic to center Hallmark left/right & top/bottom to pump valance.
Use pn_375596 to cover remaining approx. 8” of valance at both ends.
Clean all surfaces thoroughly. Sand and prime any rusted areas. Apply vinyl decal to the required
area of the dispenser following the vinyl application instructions shown in this manual. Place the
Clark logo 2” from left edge and 2” from top edge of pump skirt.
for Wayne Vista 390 Valance
Valance face: 9.5” x 56”w.
2.685"
1.25"
Tips of “Speedlines” should extend slightly beyond top & bottom edges of
valance. Split the difference, top to bottom, to assure logo will be centered.
Position graphic to center Hallmark left/right & top/bottom to pump valance.
Numbers 1 - 12
Item No. 205397
Numbers 13 - 24
Item No. 205371
Dispenser Numbering Decal Set
Includes (1) of each number shown.
Application
Clean all surfaces thoroughly. Apply decal to the required area of the dispenser following the vinyl
application instructions shown in this manual. Place bottom edge of decal 1.25” above bottom of
valance.
8.2
PRIMARY ID SIGNS
Contents
Primary ID Signs
9.0
9.1