RENTAL RATES | WORLDWIDE MACHINERY PIPELINE DIVISION
Effective November, 2015
U.S. Toll Free 800.383.2666 I Phone 281.457.4400
pipeline@wwmach.com I worldwidemachinery.com
RATES FOR PIPELINE EQUIPMENT
PIPELAYERS
ModelCapacityShip Wt.4-WeekWeekly
Caterpillar CPX-561D/E 40,000
35,000
$8,000
$2,650
Caterpillar 561M/H
40,000
34,600
$8,000
$2,650
CAT SP-D5M/N LGP 40,000
38,000
$8,500
$2,850
Caterpillar CPX-571G
60,600
50,800
$9,000
$3,000
CAT SP-D6M/N LGP
60,600
55,000
$10,000
$3,350
SUPERIOR SP-572
90,000
61,300
$11,500
$3,850
SUPERIOR SPX-460
97,000
66,150
$12,500
$4,150
Caterpillar 583K/H
140,000
90,300
$12,000
$4,000
SUPERIOR SP-583
140,000
90,300
$13,500
$4,500
SUPERIOR SPX-660
143,950
99,210
$14,000
$4,650
Caterpillar 583R
140,000
98,650
$13,500
$4,500
Caterpillar 594H/G
200,000
123,600
$17,000
$5,700
SUPERIOR SP-594
200,000
123,600
$17,500
$5,850
SUPERIOR SPX-960
213,840
136,685
$18,500
$6,150
PADDING MACHINES
Model
Capacity
4-WeekWeekly
SPD-150
Utility
$30,000
$10,000
SPD-250
2”-24”
$40,000$13,350
SPD-350
6”-48”
$50,000$16,650
SPD-450
12”-60”
$60,000
$20,000
Padding Buckets
Model
Capacity
4-WeekWeekly
SBP-25
2.5 cu. yd.
$6,000
$2,000
SBP-15
1.5 cu. yd.
$5,000
$1,650
TRENCHERS
Model
Weight
Cutting Width 4-Week
Weekly
Vermeer 755
75,000 28” (max.)
$30,000
$10,000
Vermeer 855
85,000
30” (max.)
$35,000
$11,650
Vermeer 955
95,000 30” (max.)
$40,000
$13,350
Vermeer 1055
140,000
36” (max.)
$55,000
$18,350
Vermeer 1155
175,000 36” (max.)
$65,000
$21,650
Vermeer 1255
210,000
42” (max.)
P.O.R.
P.O.R.
WELDING TRACTORS
Model
Size
4-WeekWeekly
D6
(4) welding units, generator set,
compressor, Hiab crane
$8,500$2,500
SUPERIOR SFT-180W
(4) Lincoln/Miller P.O.R.
P.O.R.
D6E SC
(4) 350 Lincoln
$9,500
$3,150
FLAT BED TRACTORS
Model
U/C
4-WeekWeekly
SFT-155/SRT-155
Steel Track/Rubber Track
$6,000
$2,000
SFT-180/SRT-180
Steel Track/Rubber Track
$7,500
$2,500
PIPE CARRIERS
Model
4-WeekWeekly
SPC-D60
$8,800 $2,950
SPC-D70
$12,500 $4,150
SPC-D80
$15,600 $5,200
VACUUM LIFTS
Model
Capacity
4-WeekWeekly
SVL-90
19,842 lbs. (9 ton)
$5,800
$1,950
SVL-130
28,660 lbs. (13 ton)
$6,800
$2,250
SVL-220
48,502 lbs. (22 ton)
$7,800
$2,600
Suction Pads
Model
Pipe Range
Capacity
4-Week
Weekly
PD 4
4”
2,750
$750
$250
PD 6-8
6”-8”
3,525
$750
$250
PD 10-14
10”-14”
6,610
$800
$275
PD 16-22
16”-22”
8,810
$900
$300
PD 24-32
24”-32”
13,220
$1,100
$400
PD 34-42
34”-42”
16,975
$1,300
$450
PD 42-48
42”-48”
25,460
$1,600
$550
PD 50-54/56-62 50”-54”/56”-62” 33,050/39,650
P.O.R.
P.O.R.
PIPE BENDING MACHINES
Model
Size
Ship Wt.
4-Week
SPB 6-20 Standard
6”-20”
11,250
$4,500
SPB 6-20 Millennium
6”-20”
11,250
$5,500
SPB 16-30 Millennium
16”-30”
37,475
$9,500
SPB 22-36 Millennium
22”-36”
59,525
$12,500
SPB 32-42 Millennium
32”-42”
95,900
$18,500
SPB 36-48 Millennium
36”-48”
150,000
P.O.R.
SPB 48-60 Millennium
48”-60”
189,000
P.O.R.
Weekly
$1,500
$1,850
$3,200
$4,150
$6,150
P.O.R.
P.O.R.
BORING MACHINES
We offer various models. Please contact us for a quote.
PIPE FACING MACHINES
Model
Pipe Size
SFM 6-14
6”-14”
SFM 16-32
16”-32”
SFM 34-48
34”-48”
SFM 48-60
48”-60”
PIPE FACING CLAMPS
Model
Pipe Size
SMC 6-10
6”-10”
SMC 10-14
10”-14”
SMC 16-22
16”-22”
SMC 24-32
24”-32”
SMC 34-40
34”-40”
SMC 42-48
42”-48”
SMC 48-50
48”-50”
SMC 56-60
56”-60”
4-Week
$8,000-$8,500
$9,500-$12,500
$12,500-$16,000
$16,500-$25,000
4-Week
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
BENDING SETS
6-20 Inch P.B.
4-Week (Bare)
4-Week (Lined)
6”$550
$800
8” $580
$950
10”$625
$1,075
12”$650
$1,115
14”$715
$1,325
16”$835
$1,350
18”$950
$1,635
20” Bare Die
$750
20” Lined Die & Liner
-
$1,500
16-30 Inch P.B.
4-Week (Bare)
4-Week (Lined)
16”$1,050 $2,225
18”$1,125 $2,275
20”$1,175 $2,305
22”$1,300 $2,450
24”$1,385 $2,455
26”$1,905 $2,950
28”$1,985 $3,150
30” Bare Die
$1,525
30” Lined Die & Liner
-
$3,235
22-36 Inch P.B.
4-Week (Bare)
4-Week (Lined)
22”$1,365 $2,950
24”$1,450 $3,025
26”$1,950 $3,185
28”$2,050 $3,325
30”$2,150 $3,450
32”$2,225 $3,550
34”$2,285 $3,750
36” Bare Die
$1,855
36” Lined Die & Liner
-
$3,650
32-42 Inch P.B.
4-Week (Bare)
4-Week (Lined)
32”$3,050 $4,550
34”$3,550 $5,050
36”$3,000 $4,050
38”$3,550 $4,450
40”$3,050 $4,550
42” Bare Die
$3,050
42” Lined Die & Liner
-
$4,350
36-48 Inch P.B.
4-Week (Bare)
4-Week (Lined)
36”$3,050 $5,300
38”$3,550 $5,400
40”$3,350 $5,400
42”$3,500 $5,400
44”$3,500 $5,400
46”$3,500 $5,575
48” Bare Die
$4,800
48” Lined Die & Liner
-
$5,500
48-60 Inch P.B.
4-Week (Bare)
4-Week (Lined)
48”$5,150 $5,750
50”$5,400 $5,800
52”$5,400 $5,950
54”$5,600 $6,100
56”$5,750 $6,250
58”$5,750 $6,300
60” Bare Die
$6,000
60” Lined Die & Liner
-
$6,550
RENTAL RATES | WORLDWIDE MACHINERY PIPELINE DIVISION
Effective November, 2015
U.S. Toll Free 800.383.2666 I Phone 281.457.4400
pipeline@wwmach.com I worldwidemachinery.com
INTERNAL LINE-UP CLAMPS
Size
(Stand-By) 4-Week
4-Week
8”$2,550 $2,350
10”$2,750 $2,400
12”-14”$2,950
$2,550
14”-16”$4,000
$3,100
16”-18”$5,800
$4,600
16”-18” powered -
$5,450
20”-22”$6,550
$5,550
24”-26”$7,500
$6,355
Powered for the rest of the items
28”-30”$8,000
$6,800
30”-32”$8,000
$6,800
34”-36”$9,000
$7,650
38”-40”$14,000
$11,900
40”-42”$14,000
$11,900
42”-44”$16,000
$14,450
46”-48”$17,000
$14,450
50”-52”P.O.R.
P.O.R.
54”-56”P.O.R.
P.O.R.
58”-60”P.O.R.
P.O.R.
MANDRELS
M=Manual Line Travel ALT=Automatic Line Travel
Size
Pneumatic 4-Week
Hydraulic 4-Week
Standard 10”-12”-M
$3,600/$3,700$3,800/$3,800
14”-16”-M
$3,900/$4,600$4,400/$4,900
14”-16” ALT
-
$4,750/$5,300
18”-20”M
$4,800/$5,450$5,000/$5,500
18”-20” ALT
-
$5,550/$6,000
20”-22” ALT
-
$5,550/$6,000
Automatic Line Travel (24”-26” and above)
24”-26”-
$7,000/$7,000
28”-30”-
$7,500/$7,500
30”-32”-
$7,500/$8,000
34”-36”-
$8,500/$8,500
36”-38”-
$9,500/$9,500
40”-42”- $14,000/$14,500
42”-44”- $16,000/$16,000
46”-48”- $17,500/$17,500
56”-
P.O.R.
52”-54” and 58”-60”
-
P.O.R.
ROLI - CRADLES
Model Size
4-WeekWeekly
RC126”-12”
$800$270
RC2412”-24” $1,000$340
RC3624”-36” $2,550$850
RC48 36”-48”
$3,000$1,000
RC60 48”-60”
$3,500$1,150
PUMPS
Model
4-WeekWeekl
Ditch Pump
P.O.R.
P.O.R.
Fill Pump
P.O.R.
P.O.R.
Pressure Pump
P.O.R.
P.O.R.
RATES FOR EARTHMOVING EQUIPMENT
TRACK-TYPE TRACTORS
Model Attach. HP Ship Wt.
4-Week
Weekly
D10T S&R 580 145,000
$29,000
$9,700
D9T
S&R 450 106,000
$23,900
$8,000
D8T
S or A&R 310 83,000
$17,100
$5,700
D7E
S or A&R 240
63,000
$13,700
$4,600
D6T S&R 200 44,000
$9,300
$3,100
D6T LGP
S or A&W 200
48,000
$13,500
$4,500
D6N PAT&R 150
37,000
$6,900
$2,300
D6N LGP
PAT&W 150
40,000
$10,900
$3,700
D6K/D5N LGP PAT&W 120
32,000
$6,900
$2,300
D6K/D5N PAT 125
30,500
$5,100
$1,700
D5K/JD650PAT&R 96
21,500
$4,100 $1,400
D4K/D37
PAT&R
84
21,000
$3,720
$1,240
Winches available for D6,D7, and D8 track-type tractors
EXCAVATORS
Model Depth
HP
Ship Wt.
4-Week
Weekly
390DL
38’9” 523
190,000
$30,000
$10,000
385CL/PC750 35’10” 454
187,000
$26,300
$8,800
365CL/PC600
26’10” 429
146,000
$23,700
$7,900
349E/345D/CL/PC490
26’8” 345
100,000
$14,900
$5,000
336EL/PC360
24’7” 291
82,000
$10,100
$3,375
330DL/PC300
24’ 268
78,000
$9,400
$3,150
329EL/325DL/PC240
23’2”
232
64,000
$8,900
$3,000
320EL/DL/PC210
21’3” 148
45,000
$5,900
$2,000
315DL/CL/PC160
19’2”
99
39,000
$5,300
$1,800
312CL
19’10” 84
30,000
$4,700
$1,600
Standard config. R boom/medium stick. Quick-coupler available on select machines
ZERO TAILSWING EXCAVATORS
Model Depth
320DL RR/PC228
22’4”
PC138
17’10”
HP
143
86
Ship Wt.
52,000
30,000
EXCAVATORS WITH ATTACHMENTS
Hydraulic Hammers
Model Hammer Ft/Lbs. 349E/345CL/PC400
G110 10,000 lb.
336EL/330DL/PC300
G80 7,500 lb.
329EL/325DL/CL
G80 6,500 lb.
320EL/DL/PC210
E68 3,500 lb.
4-Week
$6,050
$5,000
4-Week
$25,400
$18,900
$15,400
$11,500
Weekly
$2,000
$1,800
Weekly
$8,500
$6,300
$5,200
$3,900
EXCAVATORS W/THUMB
Model 349E/345CL PC400 w/Thumb
336EL/PC360 w/Thumb
330DL/PC300 w/Thumb
329EL/325DL/CL/PC240 w/Thumb
320EL/DL/CL/PC210 w/Thumb
315DL/CL/PC160 w/Thumb
312CL w/Thumb
Ship Wt.
102,000
83,000
80,000
66,000
49,000
40,000
31,000
4-Week
$16,300
$11,900
$10,800
$9,400
$6,850
$5,550
$4,950
EXCAVATOR W/MULTI-PROCESSOR
Model PC300 Ship Wt.
85,000
4-Week
$26,300
Weekly
$8,800
4-Week
$14,700
$11,550
Weekly
$4,900
$3,900
Weekly
$5,500
$4,000
$3,600
$3,200
$2,300
$1,900
$1,700
LONG REACH EXCAVATORS
Model Reach
Ship Wt.
330DL/CL 60’
85,000
320DL/CL
50’
51,000
Excavator wheel/plate compactors available.
WHEEL LOADERS
Model Bucket
HP
Ship Wt.
4-Week
992K
14 yd.
814
220,000
CALL
988H
9 yd.
501
110,000
$21,000
980K/H
7 yd.
318
67,000
$13,600
972K/H
6 yd.
287
57,000
$11,500
966K/H/JD744K 5 yd.
262
53,000
$10,100
962K/H
4.75 yd.
221
45,000
$8,300
950K/H
4 yd.
196
40,000
$7,550
938K/H/JD624K 3 yd.
169
33,000
$6,000
930K/H/JD544K 2.7 yd.
154
31,000
$5,000
Quick-coupler available on select machines. Weekly
N/A
$7,000
$4,550
$3,850
$3,400
$2,750
$2,500
$2,000
$1,700
INTEGRATED TOOL CARRIERS
Model Bucket
HP
Ship Wt.
4-Week
IT38H
3.25 yd.
180 29,000
$6,850
930K/H544K
2.5 yd.
159 26,000
$5,000
IT Attachments
Model Forks with Carriage
Material Handling Arm
Weekly
$2,300
$1,700
Ship Wt.
1,600
800
4-Week
$210
$210
Weekly
$70
$70
RENTAL RATES | WORLDWIDE MACHINERY PIPELINE DIVISION
Effective November, 2015
U.S. Toll Free 800.383.2666 I Phone 281.457.4400
pipeline@wwmach.com I worldwidemachinery.com
SCRAPERS
Model Capacity HP
Ship Wt.
4-Week
631G
31 yd.
450
103,000
$20,750
627G/H
21 yd.
485
84,000
$21,900
623G/H
23 yd.
365
82,000
$19,400
621G/H
22 yd.
330
74,000
$15,850
613C 11 yd.
175
38,000
$9,100
Weekly
$6,900
$7,300
$6,500
$5,300
$3,050
K-TEC EARTHMOVERS
Model Capacity
Ship Wt.
4-Week
1254ADT
54 yd.
49,000
$10,600
1243ADT
43 yd.
42,000
$9,900
1233ADT
33 yd.
31,000
$6,900
1233
33 yd.
29,000
$6,200
1228
28 yd.
26,000
$5,400
Weekly
$3,600
$3,300
$2,300
$2,100
$1,800
WATER TANKERS
Model Capacity
HP Ship Wt.
4-Week
631E 10,000 gal. 450
100,000
$15,500
621F 8,000 gal.
330
75,000
$12,600
615C 6,500 gal.
265
60,000
$10,400
613C 5,000 gal.
175
35,000
$9,000
740
8,000 gal.
385
66,000
$18,900
4,000 Gal. Truck
4,000 gal.
250
14,000
$5,900
2,000 Gal. Truck
2,000 gal.
175
10,000
$2,850
Weekly
$5,200
$4,200
$3,450
$3,000
$6,300
$2,000
$950
SUPERIOR WATER TOWERS
Model
Capacity
4-WeekWeekly
ST-1500
15,000 gal.
$2,000
$650
ST-1200
12,000 gal.
$1,800
$600
MOTOR GRADERS
Model
HP
Ship Wt.
4-Week
Weekly
16M/H
275 58,000$17,500$5,850
14M
259 47,000 $11,900$3,900
872D/GP
283 48,620$10,400$3,500
772G/GP
265 43,915 $8,900$3,000
140M/H
185 34,000 $7,900$2,650
Laser Equipment
P.O.R.
P.O.R.
ARTICULATED TRUCKS
Model Capacity
HP
Ship Wt.
4-Week
Weekly
740B/740
40 Ton
469
73,000
$18,200
$6,100
735B/735
35 Ton
435 70,000
$14,900
$5,000
730
30 Ton
325 51,000
$12,900
$4,300
VIBRATORY BASE COMPACTORS
Model Width
Ship Wt.
4-Week
Weekly
Sheepsfoot
CP56/563E
84”
26,000 $6,000$2,000
CP44/433E
66”
16,000 $4,400 $1,500
Smooth Drum
CS76/663E
84”
34,000 $7,100$2,400
CS56/563E
84”
25,000 $5,600$1,900
CS44/433E
66”
15,000 $4,250$1,400
SOIL COMPACTORS
Model HP Ship Wt.
4-Week
Weekly
825G/H
354
73,000 $16,200$5,400
815F
232
46,000 $12,100$4,050
AG TRACTORS
Model
HP Ship Wt.
4-Week
Weekly
JD-9430
430
45,000 $10,000$3,350
JD-9530
475
50,000 $12,000$4,000
JD-9630/9560R530/560 50,000 $14,000$4,700
AG Attachments
Tatu 16-36 Disc
-
14,000
$4,000
$1,350
Drag Box Scraper
-
30,000
$3,000
$1,000
FUEL/LUBE TRUCKS
Model 4-Week
1,000 Gallon Fuel/ 5 Product Tanks
$5,500
2,000 Gallon Fuel/ 5 Product Tanks
$6,800
DUMP TRUCKS
MODEL 14 yd. Tandem
4-WEEK
$5,200 Weekly
$1,800
$2,300
WEEKLY
$1,750
Guide to Abbreviations
S: Straight Blade A: Angle Blade PAT: Power Angle Tilt Dozer
R: Ripper W: Winch HP: Horse Power
Worldwide can provide other types of large and small equipment, including aggregate
equipment, excavator attachments, cranes, a
nd other specialized equipment. Please
contact us regarding your specialized requirements.
CONTACT US
TERMS AND CONDITIONS
Main Office: Houston, TX
2200 Post Oak Blvd., Ste. 1400
Houston, TX 77056
Phone 281.457.4400
Fax 281.452.5455
U.S. Toll Free 800.383.2666
Intl. Toll Free 800.9675.3948
pipeline@wwmach.com
Africa
Intl. Toll Free 800.9675.3948
pipeline@wwmach.com
Canada
Phone +1.587.597.2467
pipelineca@wwmach.com
Australia
Phone +61.0.400.144.432
pipelinece@wwmach.com
Europe
Phone +49.0.231.963.3073
pipelinece@wwmach.com
Latin America - General
Phone +54.11.4381.5491
pipelinesa@wwmach.com
Russia, China
and the Middle East
Phone +7.495.507.4827 Russia
fsupipeline@wwmach.com
Mexico, Brasil, Uruguay,
Argentina, Chile and Peru
Phone +54.9.11.4083.1274
India
Phone +91.11.414.59230
pipelineind@wwmach.com
Colombia, Ecuador, Bolivia
and Central America
Phone +57.316.469.6593
North America
Phone +1.281.457.4400
pipelinena@wwmach.com
Customer must provide proof of adequate insurance before picking
up machines.
Rent begins when a machine leaves one of WMPD’s yards and
continues until it is returned to one of WMPD’s yards.
Daily rates are 1/3 of weekly rates.
Monthly rates are based on a 4 week billing cycle. Hours allowed
per month are 200 hours usage. Weekly rates are based on 50 hours.
Excess hours above these amounts will be billed on a pro-rata basis.
Sales tax, when applicable, will be additional to the rental rate. Daily
rates are 1/3 of weekly rates.
Rates are subject to change at any time without notice.
The Customer is responsible for:
• Ground engaging tool replacement (i.e. bucket, teeth & cutting edge.)
• Changing filters and fluids at regular intervals.
• Returning machines in clean condition.
• Physical damage to machines.
• Tire damage or unusual wear on all machines.
• Tire wear will be charged on 623 and larger scrapers, all off-road trucks,
980 and larger wheel loaders.
• Maintaining and lubricating the machine(s) per manufacturers specifications.