MULTI MOVEMENT GUIDE
Time Setting
1.Pull the crown out to position 2.
2.Turn clockwise and set the time.
1
TIME SETTING
1.Pull crown out to position 3.
2.Turn crown to set the desired time.
3.Return crown to position 1.
2
DATE SETTING
1.Pull crown out to position 2.
2.Turn crown counter-clockwise until the
correct date is shown in the date window.
3.Return crown to position 1.
Date Watch
Date Setting
1.Pull the crown out to position 2.
2.Turn counter-clockwise and set the date for the
previous day.
MINUTE
HAND
Chronograph A
Simple analog
A
HOUR
HAND
1 2 3
SECOND
HAND
B
CHRONOGRAPH OPERATION
1.Press A to start/stop the chronograph.
2.Press B for reset.
1
2
ADJUSTING THE CHRONOGRAPH
1.Pull crown to position 3.
2.Press A to reset the second hand to “0.”
3.Press B to reset the chronograph minute and hour hands.
4.Reset the watch to the current time and return crown to
position 1.
3
DATE
Time Setting
1.Pull crown out to setting 3.
2.Turn counter-clockwise to advance the time and continue
until the day/date changes to the present day.
3.Set the correct time.
4.Push crown back to position 1.
Chronograph B
Chronograph
1/5 second hand
Time and date setting
1.Pull crown out to position 2.
Chronograph
2.Rotate crown clockwise until the previous
minute hand
day’s date is shown in the date window.
3.Pull crown out to position 3.
4.Rotate crown clockwise until the correct
Date
date is shown in the date window.
5.Continue to rotate crown to set correct am/pm time.
6.Return crown to position 1.
Note: Do not set the date between 9:00 p.m. and
12:30 a.m. to ensure accuracy.
Day/Date Watch
Date Setting
1.Pull the crown out to position 2.
2.Turn clockwise and set the date for the previous day.
Day Setting
With crown still in position 2, turn counter-clockwise and
set the day for the previous day.
DAY
1
2
3
DATE
Time Setting
1.Pull crown out to setting 3.
2.Turn counter-clockwise to advance the time and continue
until the day/date changes to the present day.
3.Set the correct time.
4.Push crown back to position 1.
A
1
SECOND
HAND
2
3
B
Chronograph operation
1.Press A to start/stop the chronograph.
2.Press B to restart/reset.
Note: After 2 hours of continuous running, the
chronograph will automatically stop and reset to save
the battery.
Split time
1.Press B while the chronograph is running.
2.Press B again to return to the chronograph.
3.Press A to finalize timing.
4.Press B to reset.
Chronograph zero reset
1.If either of the chronograph hands is not at the zero
(12:00) position, pull crown out to position 2.
2.Press B to reset chronograph minute hand. Each press
of B will advance the chronograph minute hand by one
increment or press and hold B for fast advance.
3.Press A to reset chronograph 1/5 second hand. Each
press of B will advance the chronograph 1/5 second
hand by one increment or press and hold B for fast
advance.
Chronograph C
Time and Date Setting
1.Before setting the time, make sure the
MINUTE
chronograph is stopped and set to zero
HAND
(12:00) position.
2.Pull crown out to position 2.
SECOND
3.Turn crown clockwise until the previous day’s
HAND
date is displayed.
4.Pull crown out to position 3 when the second
hand is at the 12:00 position.
5.Turn crown to set time.
Note: 24-hour hand moves correspondingly with
the hour and minute hands. When setting the time
be sure to check that the 24-hour hand is set properly.
6.Return crown to position 1.
Note: When the crown is in position 2, do not press the
pushers. Otherwise the chronograph hands will move.
Chronograph
1.Press A to start/stop the chronograph.
2.Press B to reset to zero.
Split Time
1.Press B while the chronograph is running.
2.Press B again to return to the chronograph.
3.Press A to finalize timing.
4.Press B to reset.
Chronograph Zero Reset
1.If either of the chronograph hands is not at the zero
(12:00) position, pull crown out to position 3.
2.Press A to move hands clockwise; press B to move
hands counter-clockwise.
3.Return crown to position 1.
-1-
A
24-HOUR
HAND
1 2 3
B
MULTI MOVEMENT GUIDE
Digital A
Digital D
A
C
Split Time
1.Press B while the chronograph is running.
2.Press C to finalize timing.
3.Press B to display all counts.
4.Press B again to reset.
Digital E
NORMAL TIME DISPLAY
1.Press A to change mode. Mode sequence is normal
time, chronograph, alarm, and time setting.
2.Press B for EL.
3.Press C to display date.
4.Press D to display alarm.
5.Press A+D to toggle chime on/off. (all days of week
will display for “on”.)
6.Press C+D to toggle alarm on/off.
Alarm Mode
1.Press A to change to alarm mode; hour will begin
flashing.
2.Press C to increase digits; press and hold C for
fast advance.
3.Press B to advance to minutes.
4.Press C to increase digits; press and hold C for
fast advance.
5.Press B to save data.
6.Press A to exit and return to normal time display.
DISPLAY MODES
The digital portion of the module has (3) three display views
which are selected by pressing A.
1.While in TIME view, whether in 12 or 24 hour display is
irrelevant, press A once and the DATE view will appear.
2.To have alternating views between TIME and DATE press
A a second time and each view will display for 1 second.
3.To return to TIME only view press A for a third time.
SETTING TIME/DATE
1.Press C to enter SET mode. The YEAR will begin
flashing, press A to change the year. This module
features an auto calendar from 2000 to 2050.
2.Press C to advance to the MONTH setting. The month
will begin flashing, press A to change the month.
3.Press C to advance to the DATE setting. The day will
begin flashing, press A to change the date.
4.Press C to advance to the 12hr/24hr setting. The 12h
characters will begin flashing, press A to change to 24h.
5.Press C to advance to the HOUR setting. The hour will
begin flashing, press A to change the hour.
6.Press C to advance to the MINUTE setting. The minute
will begin flashing, press A to change the minute.
7.Press C to advance to the SECONDS reset. The seconds
will begin flashing, press A to reset to 00.
8.Press C to exit SET mode.
C
A
D
SPLIT TIME
1.Press D while the chronograph is running for split time.
2.Press D again to measure multiple split times.
3.Press C to finalize timing.
4.Press D to scroll through all counts.
5.Press D again to reset to zero.
ALARM SETTING
1.Press A to change to alarm setting mode; hour will begin
flashing.
2.Press C to increase digit; press and hold C for fast
advance.
3.Press D to confirm.
4.Press D again to toggle to minutes.
5.Press C to increase digit; press and hold C for fast
advance.
6.Press A to save data and return to normal time display.
NOTE: Alarm will sound at preset time for 60 seconds.
Press D to silence alarm, or press C for 5 minute snooze.
Digital B
Digital C
B
DIGITAL BJ2718
CHRONOGRAPH MODE
1.Press A to change to chronograph mode.
2.Press C to start/stop the chronograph.
3.Press D to reset to zero.
NOTE: Press A while the chronograph is running to return
to normal time display; chronograph will continue running.
Time And Date Setting
1.Press A to change to time setting mode; seconds will
begin flashing.
2.Press C to reset seconds to zero.
3.Press B to advance to minutes.
4.Press C to increase digits; press and hold C for
fast advance.
5.Press B to set and advance to next setting value.
6.Setting sequence is: seconds, minute, hour, date,
month, weekday.
Note: When setting the hour, “H” will display for 24-hour
format, “A” or “P” will display for 12-hour format.
TIME AND DATE SETTING
1.Press and hold B for 2 seconds to enter setting mode;
year will begin flashing.
2.Press A to advance digit; press andhold A for
fast advance.
3.Press B to set and advance to next setting value.
4.Setting sequence is year, month, date, hour, minute.
5.Press B to exit setting mode.
Note: Hour will be displayed in 24-hour format in time
setting mode.
Note: If no pusher/button is operated for 30 seconds, all
changes will be saved and the setting will automatically
return to display mode.
B
TIME AND DATE SETTING
1.Press B to enter setting mode; seconds will begin
flashing.
2.Press A to set seconds to zero and return to normal time
display.
3.Press B twice to set hour.
4.Press A to increase digit; press and hold A for fast
advance.
5.Setting sequence is hour, minutes, month and date.
6.Press B to exit setting mode.
B
Chronograph Mode
1.Press A to change to chronograph mode.
2.Press C to start/stop the chronograph.
3.Press B when the chronograph is stopped to reset.
Note: When the chronograph is running, press A to
return to normal time display. Chronograph will continue
to count time.
NORMAL TIME DISPLAY
1.Press A to change display. Display sequence is time,
calendar, seconds.
2.Press B to toggle 12/24-hour format.
A
NORMAL TIME DISPLAY
1.Press A for EL.
2.Press A to display date.
Normal Time Display
1.Press A to change mode. Mode sequence is: normal
time, chronograph, alarm, time setting.
2.Press B to display alarm.
3.Press C to display date.
4.Press A+B to toggle chime on/off (all days of the week
will display for “on”).
5.Press B+C to toggle alarm on/off. Alarm will sound for 60
seconds; press B to silence alarm or press D for snooze
function (alarm will sound 5 minutes later).
A
B
TIME AND CALENDAR SETTING
1.Press A to change to time and calendar setting; seconds
will begin flashing.
2.Press C to set seconds to zero.
3.Press D to advance to minutes.
4.Press C to advance digit; press and hold C for fast
advance.
5.Press D to advance to next setting value.
6.Setting sequence is: seconds, minutes, hour, date,
month, weekday.
7.Press D to exit setting mode.
NOTE: When setting the hour, “H” will be displayed for
24-hour format; “A” or “P” for 12-hour format.
DIGITAL FL137AX
(2 pushers)
1
A
2
3
B
DIGITAL FL137AX
(2 pushers)
SECOND
AM
A
B
C
HOUR
MINUTE
TIME DISPLAY MODE
DAY
MONTH
DATE
SHOWING DATE
-2-
B
A
C
DIGITAL BJ2679
D
MULTI MOVEMENT GUIDE
DZ7177
Time 1
DIGITAL D
(pusher A)
DZ7178
DZ7179
DZ7173
Time 1
DIGITAL E
(pusher B)
Time 1
DIGITAL D
(pusher B)
Time 3
Simple
Analog
(crown)
DIGITAL E
(pusher D)
Time 2
Simple Analog
(crown)
DZ4177
DZ7175
DIGITAL E
(pusher C)
DIGITAL E
(pusher A)
Time 2
Simple Analog
(crown)
DZ7174
DZ4185
Time 3
Simple Analog
(crown)
DZ4186
Chronograph C
(pusher A)
Time 1
Simple
Analog
(crown)
Time 2
Chronograph C
(crown)
Chronograph C
(pusher B)
DZ9060
Time 1
Simple
Analog
(crown)
Time 2
Simple
Analog
(crown)
DZ9061
DZ7153
Chronograph B
(pusher A)
DIGITAL B
(pusher A)
Time 3
Chronograph B
(crown)
Time 2
DIGITAL B
(pusher B)
Chronograph B
(pusher B)
DIGITAL B
(pusher C)
-3-
DZ7156
DZ7157
Chronograph C
(pusher A)
Time 1
Chronograph C
(crown)
Chronograph C
(pusher B)
Each movement uses a different battery.
MULTI MOVEMENT GUIDE
DZ1242
DZ7137
DZ1243
DZ7138
DZ7139
DZ7140
DZ7141
Sonar Radar
Animation Module
(Pusher for sonar
animation on/off)
DIGITAL C
(pusher B)
Time 2
Simple Analog
(crown)
Time 3
Simple Analog
(crown)
DZ7101
DZ7102
Time 3
Simple
Analog
(crown)
Time 2
DIGITAL B
(pusher A)
DZ7158
Time 2
Simple Analog
(crown)
Time 3
DIGITAL B
(pusher A)
Time 4
Simple
Analog
(crown)
DIGITAL C
(pusher C)
DZ7103
Time 1
Date
Watch
(crown)
DZ7125
DZ7148
Time 1
DIGITAL C
(pusher A)
Time 1
Simple Analog
(crown)
Time 2
Simple
Analog
(crown)
DZ7147
Time 3
DIGITAL B
(pusher B)
DZ7126
DZ7127
DZ1318
Chronograph A
(pusher A)
Time 2
Simple Analog
(crown)
Time 1
Chronograph A
(crown)
DZ1319
DZ1320
Compass
Chronograph B
(pusher A)
Chronograph A
(pusher B)
Time 1
Chronograph B
(crown)
Time 2
DIGITAL B
(pusher B)
Chronograph B
(pusher B)
-4-
Each movement uses a different battery.
MULTI MOVEMENT GUIDE
DZ9025
DZ9050
Simple Analog
(crown)
Time 1
DZ9051
DZ9042
DZ9043
Simple Analog
(crown)
Time 2
Time 1
Simple Analog
(crown)
Chronograph A
(pusher A)
Time 5
Chronograph A
(crown)
Time 2
Simple Analog
(crown)
Chronograph A
(pusher B)
Time 3
Simple Analog
(crown)
Time 3
Simple Analog
(crown)
Time 4
Simple Analog
(crown)
DZ9044
Time 3
Simple
Analog
(crown)
Time 1
Simple
Analog
(crown)
Time 4
Simple
Analog
(crown)
DZ9052
Time 2
Simple
Analog
(crown)
Time 3
Simple
Analog
(crown)
DZ9045
Time 2
Simple
Analog
(crown)
DZ9053
DZ9054
DZ9046
DZ9047
DZ9048
DZ9049
Chronograph A
(pusher A)
Time 1
Chronograph A
(crown)
Time 2
Simple
Analog
(crown)
Time 1
Day/Date
Watch
(crown)
Chronograph A
(pusher B)
-5-
Each movement uses a different battery.