Personal security
Accident detector solution
for digital mobile radio systems
•High level security for single workers
•Effective location
•Reliable alarm function
Personal alarm signal system
Description | Function
01 Safety with a personal alarm signal system
A personal alarm signal system used to protect individual workstations and
workers who perform accident-prone tasks, which reduces the cost of extra
personnel.
Handling
The user carries the walkie-talkie as a „silent partner“ with him at all times.
By emergencies the walkie-talkie triggers deliberate and automatic alarms
(e.g. by unconsciousness and evacuation) and reacts on irregularities of
possible dangers.
Additionally, a manual emergency call can be issued by pressing the
emergency button. For localization, the place of location is transmitted and
simultaneously an acoustic signal sounds. The alarming person can be
found easily.
Application example: The alarm system works
from walkie-talkie to walkie-talkie.
02 Accident detector −
the core of personal security
The accident detector can be integrated as an additional module in the
DP4000 series of the Motorola walkie talkies. Available versions:
Alarm triggering
situations
Description
Serie B
Article no:
33-1626 D
Serie K
Article no:
33-1626 B
Serie F
Article no:
33-1626 A
Serie KF
Article no:
33-1626 C
Manual emergency call
Panic alarm




Man down
The walkie-talkie is in a position >60° (standard)
to the vertical over an extended period of time.




No movement alarm
The walkie-talkie has not moved over an extended period of time




Technical alarm
Via a technical check from the central software,
the walkie-talkie automatically registers itself as
logged on and accessible.




This is a cyclical check from the central software.
The user is requested to immediately press the
emergency button. If action is not followed, the
time alarm is activated.




Pull cord alarm
Removal of the walkie-talkie from the user.




Reader for passive checkpoint (please order RFID
reader separately)
The data exchange occurs without touch. No
power supply necessary. The readout of the data
to the central unit starts automatically.
−

−

Active checkpoint
(please order separately)
People tracking via close field radio. Range from
3 up to 20 meters (freely adjustable).
−
−


Time alarm
Options
2
www.baudisch.de
Wireless system
Walkie-talkies | ZIM project
03 Technical data: Walkie-talkies
Technical data
Walkie-talkies
Model
DP4000 | DP4001
Model
DP4600 | DP4601
Model
DP4800| DP4801
Digital radio communication – relaunched.
With real-time voice data
and discrete communication options.
Best-in-class audio,
optional integrated
GPS, Bluetooth®
audio and Bluetooth®
data as well as an intelligent audio function.
See model
DP4000|DP4001
plus a four-line
display and SMS.
See model
DP4600|DP4601
plus a complete keypad and a five-line
color display.
All models are equipped
with UHF and VHF bands.
Easy to operate.
Channel capacity of up to
1000 channels.
Five programmable buttons,
an emergency button and
IP57 protection class.
General information
Dimensions (H x W x D)
Weight
130,3 x 55,2 x 41,1 mm with a standard battery
approx. 365 g with a standard battery
Battery power
> 15 hours in digital mode (operating cycle 5 / 5 /90)
High-frequency specification
Frequency bands
Transmission power
VHF, UHF broadband
1 W / 4 W − UHF, 1 W / 5 W − VHF
Environmental data
Military standards
Dust and water protection
810C, 810D, 810E, 810F, 810G
IP 57
GPS (optional)
Simultaneous satellites
GPS antenna
12
integrated helical antenna
04 This project is funded by the German Federal Ministry of Economics and Technology
ZIM is a nationwide, technologically and sectorally unrestrichted funding
programme for small and middle-sized enterprises supported by the German
Federal Ministry of Economics and Technology.
This project was designed to encourage the development of innovative products, procedures and technical services, without restriction of technology and
industry.
www.baudisch.de
3
Baudisch Electronic GmbH
An astonishingly wide range
of possibilities.
Design | product implementation
Made in Germany.
Development hardware | software
SMD mounting
From prototype to mass production
3D CAD CAM CNC
We would be pleased
toadvise you about
these other products
of our firm.
Simply contact us.
In-house EMC laboratory
Operation and display
Baudisch Electronic GmbH
Im Gewerbegebiet 7 - 9
73116 Wäschenbeuren
Germany
Embedded Systems
V20140923
Customized Touch-Panel
SIP-Communication & IP-Video
Fon
+49 71 72 / 9 26 13 - 0
Fax
+49 71 72 / 9 26 13 - 30
vertrieb@baudisch.de
www.baudisch.de