Department of Electrical and Computer Engineering Circuits Lab Equipment and Parts Needed for Lab Description Quantity National Instrument MyDAQ NI MyDAQ with LabVIEW,MultiSim and Utiboard 1 **You can purchase MyDAQ from www.studica.com/fiu Any Resistor Pack and Includes a variety 100Ω - 1MΩ, 1/4W 100Ω, 120Ω, 150Ω, 330Ω, 470Ω, 680Ω 1kΩ, 2.2kΩ, 3.3kΩ, 4.7kΩ, 10kΩ 22kΩ, 47kΩ, 100kΩ, 330kΩ, 1MΩ 10 of each 10 of each 10 of each Ceramic disk Capacitors 25-50v 10%-20% 1uF/ .1uF / .01uF / .001uF / .15uF / .015uF 2 of each Inductor Standard 1mH / 10mH 2 of each Other LM-741 Op-Amp 1k Potentiometer 10k Potentiometer 117/12 VCT Transformer Jameco(Part no. 149797) Bread board (3 Terminal Strip,bigger board not the tiny one) **** we recommended "myProtoBoard for NI myDAQ" **** from www.studica.com/fiu Leads set to connect the Experiments Wire Jumper Kit (soft wire to connect circuits together) In addition to sources/website provided on the web, FIU-IEEE Non-Profit Student Chapter will be selling Prepared kits. Contact IEEE Student Chapter @ IEEE.FIUSB@gmail.com 4 2 2 1 1