24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEESILC® IDD
Technical Data Sheet
INCI:
Isododecane, Dimethicone Crosspolymer-3
CAS Numbers:
141-70-8, 541-02-6
EINECS Numbers:
205-495-9, Exempt
The JEESILC® line is comprised of standard and specialty silicones. These silicones are available in the
form of fluids, emulsions, compounds and lubricants, depending on the user’s desired application.
This unique dispersion in Isododecane, provides a fast drying, light-silky smooth feel to Skin Care
products. Additionally, JEESILC® IDD will aid in suspension properties by reducing the settling of
pigments in formulations. A unique water white, clear polymer dispersion, JEESILC® IDD enhances the
conditioning attributes of Hair Care formulations without leaving a greasy heavy build up. This product
can provide hydrophobic conditioning to anhydrous styling products that are designed to deliver a lighter
film to the hair shaft. For Sun Care formulations, JEESILC® IDD will deliver fast drying, lighter feeling
benefits without the alcohol. It is especially ideal for matte finished Color Cosmetics that require a lighter
feel while providing the long lasting wear of color.
•
•
•
•
•
Fast Drying, Smooth Feel
Reduces Pigment Settlement
Enhances Hair Conditioning Attributes
Lighter Film
Lighter Feel Properties in Hair Care
Sun Care and Color Cosmetic Applications
Suggested Applications:
•
•
•
•
•
•
•
•
Mascara
Make Up
Lip Products
Antiperspirant
Creams/Lotions
Sun Care
Styling Lotions
Fragrance Delivery
You Can Count On Us! We’re clearly your choice for Specialty Polymers….
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Recommended Use Levels:
For Color Cosmetics:
For Hair Care:
For Sun Care:
Between 10% and 25% with minimal energy required to process.
For improved conditioning with a lighter feel to the hair, the typical
usage levels are between 5% and 10%.
Incorporate at levels of 10% and 15% as an alcohol replacement for
anhydrous formulations.
Benefits:
Suggested Formulation
•
•
•
•
Improved Spreadability
Fast Drying
Good Substantivity
Lighter Feel
Skin Treatment Lotion Formulation JN1-2 AP
Supplier
Phase A
Kelco
JEEN
ARCH
JEEN
JEEN
Product Specifications:
Appearance @ 25°C:
Ionic Characteristic:
Non-Volatile Content (Wt%):
Specific Gravity @ 25°C:
Phase B
JEEN
Colorless Transparent
Gel
Nonionic
4 - 7.5
0.7 – 0.8
(5.8 lb/gal – 6.7/lb/gal)
Viscosity:
275,000 – 700,000 cps
(Brookfield LVT 0.3 rpm – spindle #4, 24 °C)
Handling and Storage:
• Store in Clean, Dry Area
• Ambient Room Temperature
• Avoid Freezing
Standard Packaging:
Drum: 322 Lbs. Net Wt.
Pail:
33 Lbs. Net Wt.
JEEN
JEEN
Seppic
Phase C
JEEN
JEEN
Botanicals
PLUS!
Phase D
JEEN
JEEN
Product/INCI
%
Deionized Water
Keltrol CG/Xanthan Gum
Glycerin 99%
Multifruit BSC
JEESCREEN® B-4/ Benzophenone-4
JEECHEM GMS-165
Glyceryl Stearate (and) PEG-100 Stearate
61.70
0.20
5.00
3.00
0.10
3.00
JEESILC IDD
Isododecane (and) Dimethicone Crosspolymer-3
JEESILC 211
Cyclomethicone
JEESILC PDS-100
2.00
Dimethicone
Simulgel NS
4.00
JEESILC 6056
Dimethicone (and) Dimethiconol (and)
Laureth 4 (and ) Laureth-23
JEECIDE G-II
Propylene Glycol (and)
Diazolidinyl Urea (and)
Methyl Paraben (and) Propyl Paraben
Arnica Extract
Arnica Montana
Flamingo Super Red
JEESORB L-20 /Polysorbate 20
Vitamin E Acetate
Tocopheryl Acetate
Fragrance
8.00
4.00
3.00
1.00
2.00
1.00
1.00
0.50
0.50
Procedure:
1.
Heat water to 65°C. Pre-mix Keltrol and Glycerin and add to the water phase.
Mix until dissolved. Add the other ingredients to Phase A one at a time and
mix well. Cool to 50°C.
2.
In the oil phase tank, add the JEESILC IDD, JEESILC CPS-211 and JEESILC
PDS-100 and mix until uniform. Add in the Simugel and mix to 50°C.
3.
Using a homogenizer, add Phase B to Phase A and mix for 10 minutes. Cool
to 40°C. Switch to prop agitation.
4.
Add the ingredients of Phase C one at a time into the main tank and mix well
after each addition.
Pre-mix Phase D in a side vessel and add to the main tank. Mix well.
You Can Count On Us! We’re clearly your choice for Specialty Polymers….
2
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEECHEM® HPIB
Technical Data Sheet
INCI:
Cyclomethicone, Hydrogenated Polyisobutene, Dimethicone Crosspolymer-3
CAS Numbers:
69430-24-6, 68937-10-0, 541-02-6
EINECS Numbers:
205-495-9, Exempt
The JEESILC® line is comprised of standard and specialty silicones. These silicones are available in the
form of fluids, emulsions, compounds and lubricants, depending on the user’s desired application.
JEECHEM® HPIB is a unique dispersion of hydrogenated polyisobutene, cyclomethicone and
dimethicone crosspolymer-3 that provides a long lasting, silky smooth feel to Skin Care products
while giving a powder like after feel.
JEECHEM® HPIB enhances the esthetic value of Creams, Lotions and Color Cosmetics and
delivers a prolonged softer feel with substantivity.
JEECHEM® HPIB will significantly improve the gloss of most cosmetics without leaving a greasy feel
or tackiness to the skin. This product provides an especially smooth conditioning effect to most Hair
Care and Styling Products without a heavy oily feel.
•
•
•
•
•
Improves Gloss
No “Greasy” Feel
Smooth Conditioning for Hair Care.
No tackiness
Soft Powdery Afterfeel
Suggested Applications:
•
•
•
•
•
•
Creams/Lotions
Liquid Foundations
Lip Products
Styling Lotions
Pomades
Sun Care
You Can Count On Us! We’re clearly your choice for Specialty Polymers….
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Recommended Use Levels:
For Creams and Lotions:
Between 5% and 10% incorporated into the oil phase of the
formulation.
For Hair Care:
For improved shine and conditioning attributes, the typical
usage levels are between 3% and 5%.
For Color Cosmetics:
Incorporate at levels of 10% and 15% for improved long lasting
wear.
Benefits:
•
•
•
•
Suggested Formulation
Enhanced Shine
Ease of Use
Slick Feel Without Tack
Lighter Feel
Alcohol Free Sunscreen Gel
This clear alcohol free sunscreen gel offers a silky
smooth feel with enhanced substantivity. This
unique formulation offers long lasting moisturization
with SPF of 10.
Supplier
Product/INCI
%
Product Specifications:
JEEN
Appearance @ 25°C:
Odor:
Specific Gravity @ 25°C:
Viscosity:
Clear to Translucent Gel
Odorless
0.80 – 0.94
150,000 – 600,000 cps
(Brookfield LVT 0.3 rpm – spindle #4, 25 °C)
JEEN
JEEN
JEECHEM® HPIB
Dimethicone Crosspolymer -3,
Cyclomethicone,
Hydrogenated Polyisobutene
JEESCREEN® OMC
Octyl Methoxy Cinnamate
JEESCREEN® OS
Octyl Salicylate
86.63
7.50
5.00
Handling and Storage:
• Store in Clean, Dry Area
• Ambient Room Temperature
• Avoid Freezing
AFF Int’l
Standard Packaging:
Drum: 400 Lbs. Net Wt.
Pail:
40 Lbs. Net Wt.
Procedure:
Combine the sunscreen phase with the fragrance and
mix until uniform. Add this premix slowly to the
JEECHEM® HPIB at room temperature and mix until
uniform.
Fragrance 118578
Total
0.87
100.00
You Can Count On Us! We’re clearly your choice for Specialty Polymers….
2
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEESILC® 3D5LV
Technical Data Sheet
INCI:
Cyclomethicone, Dimethicone Crosspolymer-3
CAS Numbers:
69430-24-6, 541-02-6
EINECS Numbers:
205-495-9, Exempt
The JEESILC® line is comprised of standard and specialty silicones. These silicones are available in the
form of fluids, emulsions, compounds and lubricants, depending on the user’s desired application.
JEESILC® 3D5 LV performs as a transparent, slick, tack-free lubrication silicone carrier.
JEESILC® 3D5 LV is an especially useful additive in Color Cosmetics, producing a slick, fast drying
film with a silky after feel. JEESILC® 3D5 LV can also be used in Sun Care formulations that require
a lighter feel. JEESILC® 3D5 LV provides ease of formulating and enhanced softness in Moisturizers
and Make-up applications. JEESILC® 3D5 LV may be used as is, or mixed with other silicone
products under high shear, to produce a soft, slick feel that is tack free.
•
•
•
•
Tack-Free
Fast Drying Film
Silky After-Feel
Feel Modifier
Suggested Applications:
•
•
•
•
Creams/Lotions
Make-Up
Moisturizers
Sun Care
You Can Count On Us! We’re clearly your choice for Specialty Polymers….
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Recommended Use Levels:
For Creams and Lotions:
3–6%
For Make-Up:
5 – 10%
For Moisturizers:
3–6%
Sun Care:
5 – 10%
Suggested Formulation
Silky Liquid Make-Up Foundation
Formulation No. JN 1/2
Supplier
Phase A
Product/INCI
Presperse
Permethyl 99A
10.00
Isododecane
JEESILC DMC 322
5.00
Cyclopentasiloxane
(and)Dimethicone Copolyol
Abil WE-09
4.00
Polyglyceryl-4 Isostearate
(and) Cetyl Dimethicone
Copolyol (and) Hexyl Laurate
Bentone Gel VS-5
1.50
Cyclomethicone (and)
Quaternium-18 Hectorite
(and) SD Alcohol 40
JEESILC 3D5 LV
6.00
Cyclomethicone (and)
Dimethicone Crosspolymer-3
Deionized Water
59.00
JEECHEM BUGL
2.50
Butylene Glycol
Sodium Chloride
1.00
SP-500/Nylon 12
1.00
TIO2 SI
7.00
Titanium Dioxide (and)
Silicone
Yellow Iron Oxide SI
1.50
Iron Oxide (and) Silicone
Red Iron Oxide SI
0.25
Iron Oxide (and) Silicone
Black Iron Oxide SI
0.25
Iron Oxide (and) Silicone
JEECIDE G-II
1.00
Propylene Glycol (and)
Diazolidinyl Urea (and)
Methyl Paraben (and)
Propyl Paraben
JEEN
Goldschmidt
Benefits:
•
•
•
RHEOX
Ease of Use
Slick Feel Without Tack
Lighter Feel
JEEN
Product Specifications:
Appearance @ 25°C:
Odor:
Specific Gravity @ 25°C:
Viscosity:
JEEN
Water White, Clear Gel
Odorless
0.80 – 0.94
700,000 cps Maximum
(Brookfield LVT 0.3 rpm – spindle #4, 24 °C)
Non-Volatile Content
(% by Weight):
Kobo
Cardre
Cardre
Cardre
2.5 - 6.0 %
Cardre
(115 °C, 1 Hr)
JEEN
Handling and Storage:
• Store in Clean, Dry Area
• Ambient Room Temperature
• Avoid Freezing
Standard Packaging:
Drum: 441 Lbs. Net Wt.
Pail:
40 Lbs. Net Wt.
%
________
Procedure:
1.
Using a homogenizer in the main tank, combine the
Permethyl 99A and JEESILC 3D5 LV and mix at moderate
agitation until smooth. Add the JEESILC DMC 322, Abil
WE-09 and Bentone Gel VS-5 and mix for 15 minutes.
2.
In a side tank, pre-blend the Nylon 12, TiO2 and Iron Oxides.
Add to the main tank, and mix for 30 minutes. Switch to
prop agitation.
3.
In a side tank, pre-blend the water, JEECHEM BUGL,
JEECIDE G-II and Sodium Chloride. Slowly add the water
phase to the oil phase. Mix for 20 – 25 minutes.
You Can Count On Us! We’re clearly your choice for Specialty Polymers….
2
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEESILC® 35C
Technical Data Sheet
INCI:
Dimethicone, Dimethicone Crosspolymer-3
CAS Numbers:
63148-62-9, 541-02-6
EINECS Numbers:
205-495-9, Exempt
The JEESILC® line is comprised of standard and specialty silicones. These silicones are available in the
form of fluids, emulsions, compounds and lubricants, depending on the user’s desired application.
JEESILC® 35C performs as a transparent, slick, tack-free lubrication silicone carrier. JEESILC® 35C is
an especially useful additive in cream and stick foundations, producing a slick feel, without tack. When
using proper emulsifiers, stable water in oil emulsions can be obtained.
JEESILC® 35C provides ease of application and enhanced softness in Moisturizers, Make-up applications
and Sun Care formulations. JEESILC® 35C may be used as is, or mixed with Dimethicone under high
shear, to produce a soft, slick feel that is tack free.
•
•
•
•
Tack-Free
Slick Feel
Ease of Application
Feel Modifier
Suggested Applications:
•
•
•
•
•
Creams/Lotions
Foundations
Make-Up
Moisturizers
Sun Care
You Can Count On Us! We’re clearly your choice for Specialty Polymers….
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Recommended Use Levels:
For Creams and Lotions:
2–5%
For Foundations:
3–6%
For Make-Up:
3–6%
For Moisturizers:
2–5%
Sun Care:
5 – 10%
Suggested Formulation
Sample Formulation
The following is a starting point for utilizing JEESILC® products in formulations.
Concentrations are approximate and individual components may be substituted
with functional equivalents as required.
Supplier
•
•
•
CRODA
Good Spreadability
Silky Feel Without Tack
Long Lasting
JEEN INT’L
JEEN INT’L
Product Specifications:
Appearance @ 25°C:
Ionic Character:
Specific Gravity @ 25°C:
Non-Volatile Content
(% by Weight):
Odor:
Carrier:
JEEN INT’L
Clear, Transparent Gel
Nonionic
0.80 – 0.94
100.00 %
Odorless
Low Viscosity Dimethyl
Silicone (5 centistokes)
Handling and Storage:
• Store in Clean, Dry Area
• Ambient Room Temperature
• Avoid Freezing
Percent
(by Weight)
PART A
JEEN INT’L
Benefits:
Ingredients/INC
I
Jeen Shea Butter
SHEA BUTTER
(Butyrospermum
Parkii)
Crodaphos CS-20
Acid (Cetearyl
Alcohol, Ceteth -20
Phosphate, Dicetyl
Phosphate)
Jeen Stearyl Alcohol
17.00
Jeen Cocoa
ButterPPP(Theobro
ma Cacao Seed
Butter
Jeesilc 35C
Dimethicone,
Dimethicone
Crosspolymer-3
6.75
DI Water
Glycerin
59.70
2.00
Triethanolamine
99%
0.80
Jeecide G-II
Propylene Glycol,
Diazolidinyl Urea,
Methyl Paraben,
Propyl Paraben
1.00
8.00
2.75
2.00
PART B
JEEN INT’L
JEEN INT’L
PART C
JEEN INT’L
Procedure:
Combine ingredients in Part A and Part B separately while
mixing and heat to 75-80° C. Add Part B to Part A with mixing
and cool to 45° C and add Part C.
Standard Packaging:
Drum: 441 Lbs. Net Wt.
Pail:
40 Lbs. Net Wt.
You Can Count On Us! We’re clearly your choice for Specialty Polymers….
2
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEESILC® UAF
Technical Data Sheet
INCI:
Propoxytetramethyl Piperidinyl Dimethicone
CAS Numbers:
Mixture
EINECS Numbers:
Exempt
The JEESILC® line is comprised of standard and specialty silicones. These silicones are available in the
form of fluids, emulsions, compounds and lubricants, depending on the user’s desired application.
JEESILC® UAF is a Unique silicone fluid designed to enhance the conditioning attributes of hair care
formulations. The JEESILC® UAF has been developed to offer superior conditioning properties and
enhanced stability in Permanent Hair Coloring products. The unique structure of the silicone fluid
allows for greater stability in resisting fade, or discoloration over time….
JEESILC® UAF offers you the ability to enhance the overall hydrophobic conditioning properties of
your hair care formulations, especially in Permanent Hair Color systems. The unique structure of our
JEESILC® UAF will resist fading and discoloration over time when exposed to UV light. In
comparison to existing silicone products the JEESILC® UAF has demonstrated superior
performance against fading, while enhancing the overall conditioning and detangling. Our JEESILC®
UAF improves hair color depth, longevity while reducing color fade in formulations.
•
•
•
•
Superior Conditioning
Enhanced Stability
UV Stable
Detangler
Suggested Applications:
•
•
•
Hair Care Lotions
Hair Care Conditioners
Permanent and Semi-Permanent Hair Color Products
You Can Count On Us! We’re clearly your choice for Specialty Polymers….
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Recommended Use Levels:
For Hair Care Lotions:
1–3%
For Hair Coloring Formulas:
2- 5%
Color Fade Study
Whiteness of 3%of Emulsion in the Bath
(30%Solids Microemulsion)
100%Cotton Fabric - Dried @120'C
Benefits:
72
•
•
•
•
Provides a Soft Silky Feel to the Hair
Enhances Shine and Hair Depth
Resistance to UV Discoloration
Provides Web Comb and Reduces
Fly Away
70
68
66
64
62
60
58
Product Specifications:
56
54
Appearance @ 25°C:
Specific Gravity @ 25°C:
Clear to Slightly Hazy
Liquid
0.94 – 0.97
Viscosity @ 25°C:
10,000 – 60,000
52
50
Di Amino Di Amino
MonoAmino
UAF
Untreated
Ganz Whiteness Readings
(Brookfield, #4 @ 30 rpm)
Handling and Storage:
• Store in Clean, Dry Area
• Ambient Room Temperature
• Avoid Freezing
Standard Packaging:
Drum: 430 Lbs. Net Wt.
Pail:
40 Lbs. Net Wt.
You Can Count On Us! We’re clearly your choice for Specialty Polymers….
2
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEESILC® 6056
Technical Data Sheet
INCI:
Dimethicone, Dimethiconol, Laureth 4, Laureth-23
CAS Numbers:
63148-62-9, 70131-67-8, 5274-68-0, 68551-12-2
EINECS Numbers:
Exempt, Exempt, 226-097-1, Exempt
A silicone emulsion that allows for ease of incorporating silicone function into oil-in-water emulsions.
This nonionic emulsion contains on average 55 percent of a high molecular weight dimethicone
having a particle size range of 0.1 to 0.2 micros, allowing for improved feel, moisturization and film
properties. JEESILC®6056 offers you the ability to easily incorporate a soft silky feel to your
current oil-in water formulations. Our nonionic emulsion can be added directly into the water phase
of the formula at room temperature using a low degree of mixing. In addition to enhance the feel,
JEESILC® 6056 will also offer good water resistance properties for Liquid Foundations and
Sunscreen systems. The small particle size distribution will allow for high concentrations without
impacting the formulations final viscosity.
•
•
•
•
Improved Feel
Soft Silky Feel
Ease of Use in Oil/Water Emulsions
Enhanced Film Formation
Suggested Applications:
•
•
•
•
Liquid Foundations
Sun Screen Lotions, Creams and Sprays
Moisturizing Creams and Lotions
Hair Care Lotions and Conditioners
You Can Count On Us! We’re clearly your choice for Specialty Polymers….
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Recommended Use Levels:
For Liquid Foundations:
2–4%
For Sunscreen Formulas:
4–8%
Water Resistant Sunscreen Spray SPF 30
For Moisturizing Creams
& Lotions:
2–4%
1–3%
Benefits:
•
Provide a soft, silky feel.
Enhance Film Formation for Color
Retention and Water Resistance.
Provide Wet Comb and Conditioning.
Product Specifications:
Appearance @ 25°C:
pH (as is) @ 20°C:
% Solids (2g/1hr/150 °C):
Viscosity:
Particle Size (nm):
Milk White Emulsion
4.5 – 8.0
64.0 – 66.5
700,000 cps Maximum
600 – 1,000
Handling and Storage:
• Store in Clean, Dry Area
• Ambient Room Temperature
• Avoid Freezing
Standard Packaging:
Drum: 440 Lbs. Net Wt.
Pail:
40 Lbs. Net Wt.
Supplier
Product/INCI
%
Phase A
JEEN
For Hair Care Lotions &
Conditioners:
•
•
Suggested Formulation
JEECHEM TN
5.00
C12-15 Alkyl Benzoate
JEEN
JEESCREEN® OS
5.00
Octyl Salicylate
®
JEEN
JEESCREEN OMC
7.50
Octyl Methoxy Cinnamate
®
JEEN
JEESCREEN B-3
4.00
Benzophenone-3
Roche
Parsol 1789
1.60
Butyl Methoxydibenzolmethane
{avobenzone}
Goldschmidt Tego Care 450
3.00
Polyglyceryl-3 Methylglucose Distearate
Croda
Syncrowax ERL-C
0.60
C18-36 Acid Glycol Ester
JEEN
JEESILC® PDS-100
4.00
Dimethicone
JEEN
Vitamin E Acetate
0.10
Tocopheryl Acetate
Phase B
DI Water
65.14
Noveon
Carbopol® EDT 2020
0.18
Acrylates/C10-30 Alkyl Acrylate
Crosspolymer
Phase C
JEEN
Triethanolamine
0.08
Phase D
JEEN
JEECIDE P
0.80
JEEN
JEESILC® 6056
3.00
Dimethicone (and) Dimethiconol
(and) Laureth-4 (and) Laureth 23
Procedure:
Phase A: Combine first 3 ingredients of Phase A; mix well. Add
JEESCREEN Benzophenone 3; mix at room temperature for 10
minutes. Heat to 80°C while mixing. Add Parsol 1789; mix for 4
more minutes while keeping temperature at 80°C. Add Tego
Care 450; mix 2 – 3 minutes. Add Syncrowax ERL-C; mix for 2 –
3 minutes. Add remaining ingredients of Phase A; mix. Keep
temperature of Phase A at 80°C. Phase B: In separate vessel
sift Carbopol® EDT 2020 to room temperature deionzed water.
Mix while heat to 75 – 80 C. Slowly add Phase A to Phase B.
Add TEA (Phase C) to Phase AB to pH 5.4 – 5.5. Mix well. Apply
high shear mixing. Add Phase D below 55°C, then slowly add
Phase E (JEESILC 6056). Apply moderate mixing while cooling
to 30°C. Homogenize at 30°C (~9,000 rpm) for 3 – 5 minutes.
®
Carbopol is a registered trademark of Noveon
You Can Count On Us! We’re clearly your choice for Specialty Polymers….
2
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEESPERSE® HD
Technical Data Sheet
INCI:
Isododecane, Dimethicone Crosspolymer-3, Laureth-4, Ceteth-10
CAS Numbers:
13475-82-6, 541-02-6, 5274-68-0, 9004-95-9
EINECS Numbers:
236-757-0, Exempt, 226-097-1, 500-014-1
A volatile hydrocarbon dispersion that allows for ease of incorporating Isododecane
into water based formulations. This nonionic dispersion contains on average 80
percent of a volatile hydrocarbon, 4 percent silicone polymer, non-ionic surfactant and
water. The Isododecane dispersion is designed to offer a user friendly, cold process
feel modifier, that possesses a volatile profile. In addition to offering superior feel, the
hydrophobic nature of the Dimethicone Crosspolymer-3 will enhance the overall film
properties while delivering a soft dry after-feel.
JEESPERSE® HD offers you the ability to easily incorporate a dry , soft silky feel to
your water based formulations by incorporating it directly into the water phase of the
formula at room temperature.
Suggested Applications:
•
Matte Foundations
•
Sun Screen Lotions, Creams and Sprays
•
Moisturizing Creams and Lotions
•
Hair Care Lotions
You Can Count On Us!
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Recommended Use Levels:
Liquid Foundations:
Sunscreen Formulations:
Moisturizing Creams and Lotions:
Hair Care Lotions and Conditioners:
25 – 35%
10 – 15.0%
10.0 – 15.0%
15.0 – 20.0%
Matte Foundation
Formulation No. 40020120-1
Benefits:
Ingredient
JEESPERSE
HD
•
Provide a soft, dry silky feel.
•
Enhance film formation for color retention
and water resistance.
Bentone Gel
VS-5
Product Specifications:
Appearance @ 25 °C:
% Solids
Milk White Emulsion
(0.5 – 1.0g/35 min-1hr/105 °C):
7.5 – 9.5 %
Viscosity
(Brookfield, Spindle 4.1.5 rpm):
Particle Size, nm:
30,000 – 200,000
300 - 1000
•
DI Water
JEECHEM
BUGL
Sodium
Chloride
SP-500
TIO2 SI
Yellow Iron
Oxide SI
Red Iron
Oxide SI
Black Iron
Oxide SI
JEECIDE G-II
Supplier
%
JEEN
International
25.0
JEEN
International
Goldschmidt
5.0
Rheox
1.50
JEEN
International
Sodium Chloride
4.0
50.0
2.5
1.0
Nylon 12
Titanium Dioxide and
Silicone
Iron Oxide and Silicone
Kobo
Cardre Inc.
1.0
7.0
Cardre hic
1.5
Iron Oxide and Silicone
Cardre Inc.
0.25
Iron Oxide and Silicone
Cardre Inc.
0.25
Propylene Glycol (and)
Diazolidinyl Urea (and)
Methylparaben (and)
Propylparaben
JEEN
International
1.00
Procedure:
1.
Using a homogenizer in the main tank, combine
the JEESPERSE HD and the JEESILC DMC
322, WE-09 and Bentone Gel VS-5 and mix for
15 minutes.
Handling and Storage:
•
JEESILC
DMC 322
Abil WE-09
INCI Nomenclature
Isododecane and
Dimethicone
Crosspolymer-3 and
Laureth-4 and Ceteth-10
Cyclopentasiloxane and
Dimethicone Copolyol
Polyglyceryl-4
Isostearate and Cetyl
Dimethicone Copolyol
and Hexyl Laurate
Cyclomethicone and
Quaternium-18 Hectorite
and SD Alcohol 40
Water
Butylene Glycol
Store in Clean, Flame Proof,
Well Ventilated Area
2.
Follow Good Manufacturing Practices
3.
In a side tank, pre-blend the Nylon 12, Ti02 and
Iron Oxides. Add to the main tank, and mix for
30 minutes. Switch to prop agitation.
In a side tank, pre-blend the water, JEECHEM
BUGL, JEECIDE G-II and Sodium Chloride.
Slowly add the water phase to the oil phase.
Mix for 20-25 minutes.
Standard Packaging:
Drum:
Pail:
325 Lbs. Net Wt.
32 Lbs. Net Wt.
You Can Count On Us!
2
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEESPERSE® HP-60
Technical Data Sheet
INCI:
Cyclomethicone, Hydrogenated Polyisobutene, Dimethicone Crosspolymer-3,
Laureth-4, Laureth-23
CAS Numbers:
69430-24-6, 68937-10-0, 541-02-6, 5274-68-0, 68551-12-2
EINECS Numbers:
Exempt, Exempt, Exempt, 226-097-1, Exempt
JEESPERSE® HP-60 is a fine particle size emulsion that contains gelled
cyclomethicone and hydrogenated polyisobutene using our new silicone polymer
Dimethicone Crosspolymer-3. This unique system has a very small particle size
distribution in the range of 500 – 700 nanometers. The principal benefits are: ease of
formulation, enhanced spreadability and improved emulsion stability while effectively
delivering a soft powder like after feel.
JEESPERSE® HP-60 offers you the ability to easily incorporate a soft silky feel to your
current oil-in-water formulations. Our nonionic emulsion can be added directly into the
water phase of the formula at a temperature range of 45 – 50 degrees Celsius using a
low degree of mixing. In addition to the enhanced after feel the
JEESPERSE® HP-60 will provide great emolliency and stability to your Liquid
Foundations, Sunscreens, Creams and Lotions.
Suggested Applications:
•
Liquid Foundations
•
Sunscreen Lotions, Creams and Sprays
•
Moisturizing Creams and Lotions
•
Hair Care Lotions and Conditioners
You Can Count On Us!
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Recommended Use Levels:
Liquid Foundations:
Sunscreen Lotions, Creams
and Sprays:
Moisturizing Creams and Lotions:
Hair Care Lotions and Conditioners:
2.0 – 4.0%
4.0 – 8.0%
2.0 – 4.0%
1.0 – 3.0%
Benefits:
Silky Night Cream
Supplier
Phase A
JEEN
•
Provides a Soft Silky Feel
•
Aids in Stabilizing Emulsions
•
Provides Moisturization and Conditioning
JEEN
JEEN
Product Specifications:
Phase B
JEEN
JEEN
JEEN
Appearance @ 25 °C:
pH (“As Is”):
% Solids (2g/1hr/150 °C:
Viscosity (Brookfield):
Particle Size:
Milk White Emulsion
4.50 – 8.00
64.0 – 66.5
500 - 2000
600 - 1000
Handling and Storage:
•
•
•
Keep Container Closed
Ambient Room Temperature
Store in Clean, Dry Area
Standard Packaging:
Drum:
Pail:
400 Lbs. Net Wt.
35 Lbs. Net Wt.
Product/INCI
JEEN
JEEN
JEEN
Phase C
JEEN
Phase D
JEEN
Deionized Water
JEECIDE G-II
Propylene Glycol, Diazolidinyl
Urea, Methyl Paraben,
Propyl Paraben
Propylene Glycol USP
Glycerin 99%
Hampene NA-4
Tetrasodium EDTA
JEEMATE 2000-DPS
PEG-40 Stearate
JEECHEM GMS-D
Glyceryl Stearate SE
JEECHEM CTG
Caprylic/capric triglyceride
Stearyl Alcohol NF
Mineral Oil USP
JEESILC PDS-200
Dimethicone
Vitamin E Acetate
Tocopheryl Acetate
% _
_
61.20
0.75
2.25
2.00
0.10
_
2.00
4.80
5.00
3.00
10.00
0.30
0.10
_
Deionized Water
Sodium Citrate
2.00
0.50
_
JEESPERSE HP-60
6.00
Hydrogenated Polyisobutene,
Cyclomethicone, Dimethicone
Crosspolymer-3, Laureth-23,
Laureth-4
Procedure:
Combine ingredients of Phase A and heat to 80°C.
Mix on lightning mixer with medium speed. In a
separate vessel, combine ingredients of Phase B and
heat to 80°C. Slowly add Phase B to Phase A under
lightning mixer. Start cooling to 40°C and add Phase
C, then the JEESPERSE HP-60 into the batch. Mix
well to uniformity. Continue cooling to room
temperature.
You Can Count On Us!
2
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEENATE® 3H
Technical Data Sheet
INCI:
POLYETHYLENE
CAS Numbers:
9002-88-4
EINECS Numbers:
Exempt
JEENATE® 3H is a polyethylene wax that contains a unique hydrocarbon distribution
that is predominantly linear with a very low concentration of branched Polyethylene.
The JEENATE® 3H Polyethylene is predominantly C-30 or greater with low levers of
C-26 hydrocarbon function. This unique carbon distribution allows the formulators to
increase the overall crystalline structure of oils with a melting point of less than 70 °C.
JEENATE® 3H is ideal for improving the overall hardness, and crystalline structure of
most traditional cosmetic oils, namely volatile silicones in stick formulations. In
addition, because of the linear nature of the polyethylene, JEENATE® 3H is very
effective at increasing the viscosity of oils to aid in emulsion stabilization.
The
®
hydrophobic nature of the JEENATE 3H will aid in film integrity, substantivity and
conditioning.
Suggested Applications:
•
•
•
•
•
•
•
Lipsticks
Foundation Make-Up Sticks
Liquid Foundations
Mascara
Sunscreen Lotions and Creams
Moisturizing Creams and Lotions
Hair Care Lotions and Conditioners
You Can Count On Us!
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Recommended Use Levels:
For Lipsticks:
For Foundation Make Up Sticks:
For Liquid Foundations:
For Sunscreen Formulations:
For Moisturizing Creams and Lotions:
For Hair Care Lotions and Conditioners:
8.0
10.0
2.0
4.0
2.0
1.0
Suggested Formulation
Cream to Powder No. 40020-2
Benefits:
•
•
•
•
– 12.0 %
– 15.0 %
– 4.0 %
– 8.0 %
– 4.0 %
– 3.0 %
Ingredients
Improve Oil Hardness and Crystal Structure.
Reduce Oil Bleed.
Enhance Film Formation for Color Retention.
Improve Emulsion Stability.
Product Specifications:
Appearance @ 25°C:
Melting Point Range °C:
Typical Penetration @ 25°C::
Specific Gravity @ 25 C:
Odor:
White Flake
62 - 68
15.5
0.83
Slight
Handling and Storage:
• Store in Clean, Dry Area
• Ambient Room Temperature
• Avoid Freezing
Phase A
JEESILC PTM
Phase B
JEENATE 3H
Microcrystalline
Wax
Phase C
JEECHEM OP
Panalane
LE -14
JEECHEM ISP
Propyl Paraben
Phase D
Light Brown
Iron Oxide
Titanium
Dioxide
Talc
INCI
Nomenclature
Supplier
%
WT
Phenyl
Trimethicone
JEEN Int’l
16.00
Polyethylene
JEEN Int’l
13.00
9.00
Octyl
Palmitate
Hydrogenated
Polyisobutene
Isostearyl
Palmitate
Propylparaben
JEEN Int’l
15.00
13.00
JEEN Int’l
10.00
JEEN Int’l
0.15
3.00
11.00
9.85
PROCEDURE:
Heat Phase B and C to 95 °C and mix until uniform.
Once uniform cool Phase B/C to 80 degrees °C and
slowly add Phase A and Phase D mix until uniform.
Pour product into desired package and cool to room
temperature.
Standard Packaging:
Drum:
Box:
Pail:
330 Lbs. Net Wt.
45 Lbs. Net Wt.
40 Lbs. Net Wt.
You Can Count On Us!
2
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEENATE® 4H
Technical Data Sheet
INCI:
POLYETHYLENE
CAS Numbers:
9002-88-4
EINECS Numbers:
Exempt
A unique linear Polyethylene that will improve the overall product hardness of cosmetic
stick formulations. The crystalline nature of JEENATE® 4H, will enhance the high
temperature stability of cosmetic stick formulations, while providing a smooth lubricous
hydrophobic film. In addition, the JEENATE® 4H will also increase the oil phase
viscosity in emulsions to improve high temperature stability and aid in the overall
product substantivity. JEENATE® 4H is ideal for improving the overall hardness, and
crystalline structure of most traditional cosmetic oils, namely volatile silicones in stick
applications. The hydrophobic nature of the JEENATE® 4H will aid in film integrity,
substantivity and conditioning properties. Combinations of the JEENATE® 4H, along
with JEENATE® 3H will provide an optimum integration of melting point and hardness.
Suggested Applications:
•
•
•
•
•
•
•
Lipsticks
Foundation Make Up Sticks
Liquid Foundations
Mascara
Sun Screen Lotions and , Creams
Moisturizing Creams and Lotions
Hair Care Lotions and Conditioners
You Can Count On Us!
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Recommended Use Levels:
Lipsticks:
8.0 – 12.0 %
Foundation Make Up Sticks:
10.0 – 15.0 %
Liquid Foundations:
2.0 – 4.0 %
Sunscreen Formulations:
4.0 – 8.0%
Moisturizing Creams and Lotions:
2.0 – 4.0%
Hair Care Lotions and Conditioners: 1.0 – 3.0%
Benefits:
Improve Oil hardness and crystal structure.
• Reduce oil bleed
• Enhance film formation for color retention.
• Improve emulsion stability.
Mineral Oil
C
Product Specifications:
Castor Oil
C
•
Test Method
Appearance @ 25°C:
Melting Point °F:
Viscosity @ 210°F::
Penetration @ 77 F:
Color (Saybolt):
Pastille
158 - 175
1 – 10 cps
13 – 22 dmm
15 – 40
ASTM D 127
ASTM D 3236
ASTM D 1321
ASTM D 156
Handling and Storage:
•
•
•
•
Compatibility Chart
JEENATE® 4H
5% Addition
Cyclomethicone
C
Phenyl Trimethicone C
Isododecane
C
Octyl Palmitate
C
C = Compatibility
Store in Clean, Dry Area
Ambient Room Temperature
Avoid Extreme Temperature
Follow GMP Procedures
Standard Packaging:
Bag: 55 Lbs. Net Wt.
Pail: 20 Lbs. Net Wt.
You Can Count On Us!
2
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEENATE® 5H
Technical Data Sheet
INCI:
POLYETHYLENE
CAS Numbers:
9002-88-4
EINECS Numbers:
Exempt
A unique linear Polyethylene that will improve the overall product hardness of cosmetic
stick formulations. The crystalline nature of JEENATE® 5H will enhance the high
temperature stability of cosmetic stick formulations while providing a smooth lubricous
hydrophobic film. In addition the JEENATE® 5H will also increase the viscosity of the
oil phase to improve high temperature stability and aid in the overall product
substantivity. JEENATE® 5H is ideal for improving the overall hardness, and crystalline
structure of most traditional cosmetic oils, namely volatile silicones in stick
formulations. The hydrophobic nature of the JEENATE® 5H will aid in film integrity,
substantivity and conditioning properties. Combinations of the JEENATE® 4H, along
with JEENATE® 5H will provide an optimum combination for all your stick applications.
Suggested Applications:
•
Lipsticks
•
Foundation Make Up Sticks
•
Liquid Foundations
•
Mascara
•
Hair Care Lotions
You Can Count On Us!
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Recommended Use Levels:
For Lipsticks:
8.0 – 12.0%
For Foundation Make Up Sticks:
10.0 – 15.0%
Liquid Foundations:
2.0 – 4.0%
Hair Care Lotions:
1.0 – 3.0%
Benefits:
•
Improve Oil hardness and crystal structure.
•
Reduce oil bleed
Compatibility Chart
JEENATE® 5H
5% Addition
•
Enhance film formation for color retention.
Mineral Oil
C
Castor Oil
C
Cyclomethicone
C
Product Specifications:
Test Method
Appearance @ 25°C: Pastille
Visual
Melting Point °F:
181- 194 ASTM D 127
Viscosity @ 210°F:: 5 – 15 cps ASTM D 3236
Penetration @ 77 F: 3 – 8 dmm ASTM D 1321
Color (Saybolt):
12 – 25
ASTM D 156
Handling and Storage:
•
•
•
•
Phenyl Trimethicone
C
Isododecane
C
Octyl Palmitate
Store in Clean, Dry Area
Ambient Room Temperature
Avoid Extreme Temperature
Follow GMP Procedures
C
C = Compatibility
Standard Packaging:
Bag: 50 Lbs. Net Wt.
Bag: 55 Lbs. Net Wt.
You Can Count On Us!
2
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEENATE® SP
Technical Data Sheet
INCI:
Polyethylene, Stearoxy Dimethicone
CAS Numbers:
9002-88-4, 68554-53-0
EINECS Numbers:
Exempt, Exempt
A unique silicone modified Polyethylene that will improve the overall structure and feel
of the oil phase in emulsion and anhydrous formulations. The crystalline nature of
JEENATE® SP will enhance viscosity of most cosmetic oils which will results in
improved high temperature stability of emulsions and anhydrous products, while
providing a smooth lubricous hydrophobic film. Additionally the JEENATE® SP also
acts as a dispersing agent for inorganic materials , allowing for a smooth uniform
payout and spreadability of colors and sunscreens.
JEENATE® SP, is ideal for improving organic sunscreen performance, film properties
resulting in a softer feel for your applications. The hydrophobic nature of the
JEENATE® SP will aid in film integrity, substantivity and conditioning properties.
Suggested Applications:
•
Lipsticks
•
Foundation Make Up Sticks
•
Liquid Foundations
•
Mascara
•
Sun Screen Lotions and , Creams
•
Moisturizing Creams and Lotions
•
Hair Care Lotions and Conditioners
You Can Count On Us!
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Recommended Use Levels:
Lipsticks:
Foundation Make Up Sticks:
Liquid Foundations:
Sunscreen Formulations:
Moisturizing Creams and Lotions:
Hair Care Lotions and Conditioners:
8.0 – 12.0%
5.0 – 10.0%
2.0 – 4.0%
4.0 – 8.0%
2.0 – 4.0%
1.0 – 3.0%
Extended Wear Lipstick
Formulation JN111104EU
Benefits:
•
•
•
•
Improve Oil hardness and crystal structure.
Improve oil thickness of organic sunscreens
Enhance film formation for color retention.
Improve emulsion stability.
Product Specifications:
Phase
Ingredients
A
Behenyl
Alcohol S75
A
A
Kester Wax
EM
Siliconyl
Candelilla
JEENATE SP
A
JEENATE 4H
A
Polybutene
H300
Pigment
Base
A
A
Appearance @ 25°C:
Congealing Point °C:
Absorptivity :
Heavy Metals:
Oil Content:
White to Off White Wax
65 – 75
ASTM D 938
< 0.01
USP 851
< 0.002 %
USP 231
0.75 Maximum ASTM D 7212-68
A
A
Siliconyl
Candelilla
Siliconyl
Polyethylene
Polyethylene
Polybutene
Supplier
%
Koster
Keunen
8.00
Koster
Keunen
Koster
Keunen
JEEN Int’l.
5.00
JEEN Int’l.
2.00
BP
Chemical
2.00
Red Iron Oxide53 %
Dimethicone
Titanium
Dioxide - 17.8%
Kester Wax
K-24 -28.6%
Cyclomethicone
Isodeodecane
5.00
9.00
15.00
JEEN Int’l.
44.00
Presperse
10.00
Total
Handling and Storage:
•
•
•
JEESILC
CPS-312
Permethyl®
99A
INCI
Nomenclature
Behenyl Alcohol
100.00
Procedure:
Store in Cool, Dry, Well Ventilated Area
Store away from Oxidizing Agents
Store away from Strong Acids
1. Melt & mix all components @ 80° C, excluding
JEESILC CPS-312 and Permethyl 99A.
2. Once fully melted and mixed, add Pigment
Base.
®
3. Add JEESILC CPS-312 and Permethyl 99A.
Allow temperature to cool to 65° C.
4. Pour into molds.
You Can Count On Us!
Standard Packaging:
Box:
This information is furnished without warranty, expressed or implied, except that it is accurate to the best
knowledge of JEEN International Corporation. The data on this sheet relates only to the specific
material designated herein. JEEN International Corporation assumes no legal responsibility for use or
reliance upon these data.
55 Lbs. Net Weight
You Can Count On Us!
2
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEECIDE CAP-2
Technical Data Sheet
INCI Name:
Caprylyl Glycol, Phenoxyethanol, Hexylene Glycol
CAS Numbers:
1117-86-8, 122-99-6, 107-41-5
EINECS Numbers:
214-252-7, 204-589-7, 203-489-0
JEEN International has recognized the need for a synergistic blend of conventional and nonconventional preservative ingredients that inhibit microbial growth. JEECIDE CAP-2 is a unique easyto-use clear liquid preservative that is:
•
•
•
•
•
•
•
•
•
Paraben-free
Formaldehyde-free
Broad spectrum activity – effective against bacteria, yeast and mold
Active over a wide pH range (3-10)
Compatible with anionic, cationic and non-ionic surfactants and emulsifiers
Toxicologically safe for use
Equally suitable for use in both rinse-off and leave-on products
Effective in difficult to preserve Water/Silicone emulsions
Approved for Global use.
pH Stability:
Stable in the usual operating range of 3-10 which is typical for most personal care products.
Light Stability:
JEECIDE CAP-2 is light sensitive and should always be stored in an opaque container.
Recommended Use Level:
JEECIDE CAP-2 can be added at 0.5 – 1.5% for effective anti-microbial efficacy. However, it is
important that every formulation be challenge-tested to determine the correct level of JEECIDE CAP2 to ensure proper preservation.
Method of Addition:
It is suggested not to add this blend to a product at a temperature exceeding 70 - 75ºC for extended
time periods. For emulsion products, because of the excellent compatibility of this blend with most
ingredients, incorporation of it during the cool-down phase of processing is preferred. . It is soluble
or dispersible in most non-polar materials. JEECIDE CAP-2 is not water soluble however for highly
aqueous systems, the addition of a co-solvent, coupling agent or surfactant (eg. Polysorbate 20) in a
1:1 ratio will make it water soluble to obtain a clear system.
Page 1 of 3
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Technical Data Sheet continued….JEECIDE CAP-2
Solubility Data:
Ingredient
Mineral Oil
Cyclomethicone
Dimethicone 200/100
cst.
Caprylic/Capric
Triglycerides
Water
Propylene Glycol
Ethanol 190 Proof
Isododecane
C12-15 Alkyl Benzoate
Isopropyl Myristate
Butylene Glycol
Phenyltrimethicone
Compatibility
D
IS
D
S
D
S
S
S
S
S
S
S
D: Dispersible
IS: Insoluble
S: Soluble
Recommended Use Level:
JEECIDE CAP-2 can be added at 0.5 – 1.5% for effective anti-microbial efficacy. However, it is
important that every formulation be challenge-tested to determine the correct level of JEECIDE CAP2 to ensure proper preservation.
Microbiological Activity:
JEECIDE CAP-2 is effective against both gram-positive and gram-negative bacteria, yeast and
molds.
Page 2 of 3
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Technical Data Sheet continued….JEECIDE CAP-2
Minimum Inhibitory Concentration (MIC)
Objective:
Determine activity of JEECIDE CAP-2 to Minimum Inhibitory Concentration (MIC) broth tests.
Procedure:
A standard microtiter plate MIC test was conducted in Tryptic Soy Broth (bacteria) Sabouraud Dextrose
Broth (yeast and molds).
Results:
As shown in Table 1, JEECIDE CAP-2 is very effective at low concentrations against gram negative and
positive bacteria and effective against yeasts and molds.
Table 1.
Minimum Inhibitory Concentrations
Organism
Gram-Negative bacteria
Burkholderia cepacia
Escherichia coli
Enterobacter gergoviae
Enterobacter aerogenes
Flavobacterium odoratum
Klebsiella pneumoniae
Proteus mirabilis
Pseudomonas aeruginosa
Gram-positive bacteria
Staphylococcus aureus
Staphylococcus
epidermidis
Yeast
Candida albicans
Saccharomyces cerevisiae
Mold
Aspergillus niger
Pencillium sp.
Product Specifications:
Appearance:
Odor:
Specific Gravity:
% Water (KF):
ATCC #
JEECIDE CAP-2
25416
8739
33028
13048
NCIB 13294
4352
9240
9027
1250
625-1250
5000
1250-2500
1250
625
1250
2500-5000
6538
12228
625
625
10231
7752
313
<78
9642
Cosmetic isolate
<78
<78
Clear liquid
Slight, characteristic
0.967 – 1.016
1 MAX
Preservative Compositional Breakdown:
Phenoxyethanol:
30.0 – 40.0 %
Regulatory: Product approved for Global Use.
You Can Count On Us!
Revision Date: 3/16/2005
Page 3 of 3
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Kill Test Data
JEECIDE CAP-2 has been tested using the tube testing method. Below are the results:
JEECIDE CAP-2 @ 1%
Bacteria
Yeast
Mold
Pool 1
Results
3
Pool 2
3
Pool 3
3
Pool 4
Pool 5
3
3
Scale:
0 = No Kill
1 = Slight
2 = Moderate
3 = Kill
You Can Count On Us!
All suggestions and data in this bulletin are based on information we believe to be reliable. They are offered in good faith. However, no guarantee is made or implied as
conditions and methods of use of our products are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions on
an experimental basis before adopting them on a commercial scale. Statements as to the use of our products are not to be construed as recommendations for their use in the
infringement of any patents.
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEECIDE CAP-4
Technical Data Sheet
INCI Name:
Caprylyl Glycol, Phenoxyethanol
CAS Numbers:
1117-86-8, 122-99-6
JEECIDE CAP-4 attributes include the following:
•
•
•
•
•
•
•
•
•
•
Paraben-free
Formaldehyde-free
Highly effective anti-microbial
Active over a wide pH range (3-10)
Compatible with anionic, cationic and non-ionic surfactants and emulsifiers
Toxicologically safe for use
Equally suitable for use in both rinse-off and leave-on products
Effective in difficult to preserve Water/Silicone emulsions
Globally approved: US, EU and Japan.
Can be used alone or in combination with other preservatives
pH Stability:
Stable in the usual operating range of 3 – 10 which is typical for most personal care products
Recommended Use Level:
JEECIDE CAP-4 can be added at 0.5 – 1.5% for effective anti-microbial efficacy. However, it is
import that every formulation be challenge-tested to determine the correct level of JEECIDE CAP-4 to
ensure proper preservation.
Method of Addition:
For emulsion products, JEECIDE CAP-4 can be added directly to the water phase during pre or postemulsification at or below 80 °C. It is soluble or dispersible in most non-polar materials. JEECIDE
CAP-4 is not water soluble however for highly aqueous systems, the addition of a co-solvent,
coupling agent or surfactant (eg. Polysorbate 20) in a 1:1 ratio will make it water soluble to obtain a
clear system.
Page 1 of 3
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Technical Data Sheet continued….
Solubility Data:
Ingredient
Water
Mineral Oil
Apricot Kernel Oil
Jojoba Oil
Cyclomethicone
PEG-8
Dimethicone 200/100 cst
Phenyltrimethicone
Glycerin
Propylene Glycol
Ethanol 190 Proof
C12-15 Alkyl Benzoate
Butylene Glycol
Polysorbate – 20
Polysorbate – 80
PEG-40 Hydrogenated
Castor Oil
Compatibility
IS
D
S
S
IS
S
D
D
S
S
S
S
S
S
S
S
D: Dispersible
IS: Insoluble
S: Soluble
Recommended Use Level:
0.5 – 1.5%
Microbiological Activity:
JEECIDE CAP-4 is effective against both gram-positive and gram-negative bacteria, yeast and
molds. In difficult to preserve systems, JEECIDE CAP-4 can be used in combination with other
preservative agents. Examples of this are:
• 0.5 – 1.0% JEECIDE CAP-4 and 0.20% Potassium Sorbate or Sorbic Acid
• 0.5 – 1.0% JEECIDE CAP-4 and 0.05% Iodopropynyl Butylcarbamate
• 0.5 – 1.0% JEECIDE CAP-4 and 0.20% DMDM Hydantoin
• 0.5 – 1.0% JEECIDE CAP-4 and 0.10% Sodium Benzoate
Page 2 of 3
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Product Specifications:
Test
Appeearance
Odor
Specific Gravity
% Moisture (KF)
% Phenoxyethanol
(HPLC)
% Caprylyl Glycol
Specifications
Clear Liquid
Characteristic
1.0126 – 1.0217
1 % Maximum
53 – 58
42 - 47
Regulatory: Approved for global use.
Storage Conditions:
JEECIDE CAP-4 can be stored in the original, unopened containers at ambient temperature for at
least one year. When exposed to freezing temperatures, JEECIDE CAP-4 may cloud and slightly
separate. The product should be mixed and gently warmed to 45 – 50 °C to obtain a clear mixture.
You Can Count On Us!
All suggestions and data in this bulletin are based on information we believe to be reliable. They are offered in good faith. However, no guarantee is
made or implied as conditions and methods of use of our products are beyond our control. We recommend that the prospective user determine the
suitability of our materials and suggestions on an experimental basis before adopting them on a commercial scale. Statements as to the use of our
products are not to be construed as recommendations for their use in the infringement of any patents
Page 3 of 3
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEECIDE CAP- 5
Technical Data Sheet
INCI Name: Phenoxyethanol & Caprylyl Glycol & Potassium Sorbate & Water & Hexylene Glycol
CAS Numbers:
1117-86-8, 122-99-6, 590-00-1, 7732-18-5, 107-41-5
EINECS Numbers: 214-254-7, 204-589-7, 246-376-1, 231-791-2, 203-489-0
JEEN International has recognized the need for a synergistic blend of conventional and nonconventional preservative ingredients that inhibit microbial growth. JEECIDE CAP-5 is a unique easyto-use clear liquid preservative that is:
•
•
•
•
•
•
•
•
•
Paraben-free
Formaldehyde-free
Broad spectrum – effective against bacteria with enhanced protection against yeast and mold
for difficult to preserve fomulations.
Active over an acidic pH range 3.0 – 6.5
Compatible with anionic, cationic and non-ionic surfactants and emulsifiers
Toxicologically safe for use
Equally suitable for use in both rinse-off and leave-on products
Effective in difficult to preserve Water/Silicone emulsions
Approved for Global use.
pH Stability:
Stable in the operating range of 3.0 – 6.5.
Recommended Use Level:
JEECIDE CAP-5 can be added at 0.5 – 1.5% for effective anti-microbial efficacy. However,
it is important that every formulation be challenge-tested to determine the correct level of
JEECIDE CAP-5 to ensure proper preservation.
Method of Addition:
It is suggested not to add this blend to a product at a temperature exceeding 70 - 75°C for extended
time periods. For emulsion products, because of the excellent compatibility of this blend with most
ingredients, incorporation of it during the cool-down phase of processing is preferred. It is soluble or
dispersible in most non-polar materials. JEECIDE CAP-5 is not water soluble however for highly
aqueous systems, the addition of a co-solvent, coupling agent or surfactant (eg. Polysorbate 20) in a
1:1 ratio will make it water soluble to obtain a clear system.
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Technical Data Sheet continued….
Solubility Data:
Ingredient
Mineral Oil
Cyclomethicone
Dimethicone 200/100
cst.
Caprylic/Capric
Triglycerides
Water
Propylene Glycol
Ethanol 190 Proof
Isododecane
C12-15 Alkyl Benzoate
Isopropyl Myristate
Butylene Glycol
Phenyltrimethicone
Compatibility
D
IS
D
S
D
S
S
S
S
S
S
S
D: Dispersible
IS: Insoluble
S: Soluble
Microbiological Activity:
JEECIDE CAP-5 is very effective against both gram-positive and gram-negative bacteria; and very
effective against yeast and molds.
2
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Microbiological Challenge Studies:
A study was conducted using 2 formulations: an oil-in-water emulsion and a water-in-oil
emulsion using 0.5% and 1.0% JEECIDE CAP-5. The protocol used was a modification of the
CTFA Challenge Test using a 3 week re-challenge time period instead of a 4 week period. All
samples were inoculated at the start of the study and sampled at 24 hours, 48 hours, 7 days,
14 days and 21 days. After 21 days, all samples were re-inoculated and subjected to a second
challenge.
Oil-in-Water Emulsion
Ingredients
Water
Glycerin
Apricot Kernel Oil
Cetearyl Alcohol &
Ceteareth-20
Glyceryl Stearate &
PEG-100 Stearate
JEECIDE CAP-5
Test
Organism
Control
0.5%
JEECIDE CAP-5
1.0%
JEECIDE CAP-5
70.50
4.00
17.00
4.50
70.00
4.00
17.00
4.50
69.50
4.00
17.00
4.50
4.00
4.00
4.00
X
0.50
1.00
Unpreserved Control
Initial Challenge
24 hrs.
7 days
21 days
S. aureus
ATCC 6538
7.4 x 10
4
<10
3
P. aeruginosa
ATCC 9027
2.5 x 10
4
1.6 x 10
7
1.9 x 10
K. pneumoniae
ATCC 4352
1.6 x 10
5
7.6 x 10
4
C. albicans
ATCC 10231
4.1 x 10
4
8.3 x 10
A. niger
ATCC 9642 +
Penicillium sp.
isolate
3.4 x 10
4
2.5 x 10
Unpreserved Control
Re-challenge
24 hrs.
7 days
21 days
1.4 x 10
6
4.3 x 10
2
<10
7
1.5 x 10
7
2.0 x 10
7
1.9 x 10
7
4.0 x 10
3
1.1 x 10
6
1.6 x 10
6
4.0 x 10
5
4
5.3 x 10
4
4.0 x 10
5
4.4 x 10
5
8.0 x 10
5
4
1.4 x 10
4
5.1 x 10
4
3.0 x 10
4
2.9 x 10
4
<10
3
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
0.5% JEECIDE CAP-5
Initial Challenge
Test
Organism
0.5% JEECIDE CAP-5
Re-challenge
24 hrs.
7 days
21 days
24 hrs.
7 days
21 days
S. aureus
ATCC 6538
<10
<10
<10
<10
<10
<10
P. aeruginosa
ATCC 9027
<10
<10
<10
<10
<10
<10
K. pneumoniae
ATCC 4352
<10
<10
<10
<10
<10
<10
C. albicans
ATCC 10231
1.2 x 10
4
<10
<10
<10
<10
<10
A. niger
ATCC 9642 +
Penicillium sp.
isolate
2.3 x 10
3
<10
<10
<10
<10
<10
1% JEECIDE CAP-5
Initial Challenge
24 hrs.
7 days
21 days
24 hrs.
S. aureus
ATCC 6538
<10
<10
<10
<10
<10
<10
P. aeruginosa
ATCC 9027
<10
<10
<10
<10
<10
<10
K. pneumoniae
ATCC 4352
<10
<10
<10
<10
<10
<10
C. albicans
ATCC 10231
<10
<10
<10
<10
<10
<10
A. niger
ATCC 9642 +
Penicillium sp. isolate
<10
<10
<10
<10
<10
<10
Test Organism
1% JEECIDE CAP-5
Re-challenge
7 days
21 days
4
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Water-In-Oil Emulsion
Control
Ingredients
Water
Glycerin
Butylene Glycol
Sodium Chloride
Cyclomethicone
Dimethicone
Isostearyl Palmitate
Isododecane &
Dimethicone
Crosspolymer-3
Cyclomethicone &
PEG/PPG-18/18
Dimethicone
JEECIDE CAP-5
Test
Organism
0.5%
JEECIDE CAP-5
1.0%
JEECIDE CAP-5
59.70
4.00
3.00
0.30
7.00
2.00
4.00
10.00
59.20
4.00
3.00
0.30
7.00
2.00
4.00
10.00
59.20
4.00
3.00
0.30
7.00
2.00
4.00
10.00
10.00
10.00
10.00
X
0.50
1.00
Unpreserved Control
Initial Challenge
24 hrs.
7 days
21 days
4
S. aureus
ATCC 6538
2.0 x 10
P. aeruginosa
ATCC 9027
4.4 x 10
K. pneumoniae
ATCC 4352
1.1 x 10
C. albicans
ATCC 10231
1.1 x 10
4
A. niger
ATCC 9642 +
Penicillium sp.
isolate
2.0 x 10
3
4
5
4.0 x 10
7.1 x 10
1.1 x 10
8.5 x 10
1.2 x 10
3
4
5
3
4
Unpreserved Control
Re-challenge
24 hrs.
7 days
21 days
<10
7.2 x 10
9.5 x 10
3
<10
8.7 x 10
2.2 x 10
3.6 x 10
8.0 x 10
3
3
1.5 x 10
2.0 x 10
2
4
3
3
3
<10
3.5 x 10
3.4 x 10
4.8 x 10
1.7 x 10
<10
4
3
3
3
1.1 x 10
5
<10
1.7 x 10
2.2 x 10
3
3
5
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Test Organism
0.5% JEECIDE CAP-5
Initial Challenge
24 hrs.
7 days 21 days
0.5% JEECIDE CAP-5
Re-challenge
24 hrs.
7 days
21 days
S. aureus
ATCC 6538
<10
<10
<10
<10
<10
<10
P. aeruginosa
ATCC 9027
<10
<10
<10
<10
<10
<10
K. pneumoniae
ATCC 4352
<10
<10
<10
<10
<10
<10
C. albicans
ATCC 10231
1.1 x 10
2
<10
<10
<10
<10
<10
A. niger
ATCC 9642 +
Penicillium sp.
isolate
3.0 x 10
1
<10
<10
<10
<10
<10
1% JEECIDE CAP-5
Initial Challenge
Test Organism
1% JEECIDE CAP-5
Re-challenge
24 hrs.
7 days
21 days
24 hrs.
7 days
21 days
S. aureus
ATCC 6538
<10
<10
<10
<10
<10
<10
P. aeruginosa
ATCC 9027
<10
<10
<10
<10
<10
<10
K. pneumoniae
ATCC 4352
<10
<10
<10
<10
<10
<10
C. albicans
ATCC 10231
<10
<10
<10
<10
<10
<10
A. niger
ATCC 9642 +
Penicillium sp.
isolate
2.0 x 10
<10
<10
<10
<10
<10
1
6
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Results:
Oil-in-Water
The JEECIDE CAP-5 at 1.0% killed all the challenge organisms within 24 hours after each challenge.
At 0.5%, activity was slower versus yeast and mold than against bacteria after the first challenge, but
molds were reduced to less than 10 per gram within 48 hours (results not shown). After the second
challenge, 0.5% was effective against all organisms within 24 hours.
Water-in-Oil
The JEECIDE CAP-5 was effective against bacteria within 24 hours after each challenge. At 1.0%,
the JEECIDE CAP-5 was faster against yeast and mold than at 0.5% after the first challenge but no
organisms were detected 24 hours after the second challenge in the presence of 0.5% or 1.0%
JEECIDE CAP-5.
Product Specifications:
Appearance @ 25 °C:
Odor:
Specific Gravity:
% Water (KF):
Clear to slightly hazy liquid*
Slight, Characteristic
1.015 – 1.065
12 Maximum
*Caution: Product may separate upon standing. Mix before use.
Preservative Compositional Breakdown:
% Phenoxyethanol:
35 – 45%
% Potassium Sorbate:
8 – 15%
Regulatory: Product approved for Global Use.
You Can Count On Us!
7
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Kill Test Data
JEECIDE CAP-5 has been tested using the tube testing method. Below are the results:
JEECIDE CAP-5 @ 1%
Bacteria
Yeast
Mold
Pool 1
Results
3
Pool 2
3
Pool 3
3
Pool 4
Pool 5
3
3
Scale:
0 = No Kill
1 = Slight
2 = Moderate
3 = Kill
You Can Count On Us!
All suggestions and data in this bulletin are based on information we believe to be reliable. They are offered in good faith.
However, no guarantee is made or implied as conditions and methods of use of our products are beyond our control. We
recommend that the prospective user determine the suitability of our materials and suggestions on an experimental basis before
adopting them on a commercial scale. Statements as to the use of our products are not to be construed as recommendations for
their use in the infringement of any patents.
8
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
JEECHEM® FS-102
Technical Data Sheet
INCI:
Hexylene Glycol, PEG-25 Hydrogenated Castor Oil, PEG-40 Hydrogenated Castor
Oil
CAS Numbers:
107-41-5, 61788-85-0, 61788-85-0
EINECS Numbers:
203-489-0, Exempt, Exempt
JEECHEM® FS-102 is a low-odor, high performance solubilizing agent.
JEECHEM® FS-102 has great solvent power that is useful for solubilizing
fragrances, essential oils, active ingredients, vitamins and other
hydrophobic substances into aqueous-based systems.
In some
formulations, it can replace alcohol to allow the claim of “alcohol-free”.
•
Solubilizer
•
Alcohol Replacement
Suggested Applications:
•
Body Washes
•
Shampoos
•
Facial Cleansers
•
Perfumes & Colognes
•
Toners
You Can Count On Us!
1
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Recommended Use Levels:
For Body Wash:
For Shampoo:
For Perfumes & Colognes:
Toners:
0.75 – 1.5%
0.75 – 1.5%
0.75 – 1.5%
0.75 – 1.5%
Benefits:
Aids in maintaining clarity
• Freeze Thaw Stability
• Non-Tacky
• Excellent skin feel
•
Solubility Data
Usage:
Product Specifications:
Appearance @ 25°C:
Color (Gardner):
pH% 5%:
Moisture, %:
Iodine Value:
Acid Value:
Viscous Liquid
4 Maximum
5.0 – 7.50
1.0 Maximum
1.0 Maximum
2.0 Maximum
Handling and Storage:
• Store in Clean, Dry Area
• Ambient Room Temperature
• Follow GMP procedures
To solubilize hydrophobic
substances into aqueous systems, it
is recommended the substance be
pre-mixed with JEECHEM® FS-102
in a 1:1 ratio to obtain complete
solubility and clarity of the substance
in the finished product.
Standard Packaging:
Drum: 450 Lbs. Net Wt.
Pail:
40 Lbs. Net Wt.
You Can Count On Us!
2