Item Part
Number
1
2
291011
216258
3
4
5
213277
213278
216645
6
7
8
9
216024
290000
216081
216055
290000
215971
215961
202047
213473
213641
10 213642
11 213900
213914
12 215948
13 215951
14 216018
15 216596
215965
16 213254
17 213254
Description
Hopper & Lid
Fry Basket
Fry Diverter
Dispenser Drum
Lower Guide (Complete)
Ultem Runner
Ultem Screws
Upper Guide Complete)
Ultem Runner
Ultem Screws
Lift Saddle
Saddle Skid
Skid Screws
Pre-Stage Stop Gate
Accumulator Door (Left)
Accumulator Door (Rright)
Lift Dovetail
Dovetail Screws
Carriage Guide
Hopper Support Bar (Right)
Hopper Support Bar (Left)
Brake Caster – Front
“ “ “
Fiber Optic Sensor #1
Fiber Optic Sensor #2
Qty
2
14
1
2
12
1
2
4
1
1
1
10
1
1
1
1
1
2
2
1
1
1
1
1
4
Function
Holds frozen Fries until they are portioned into Fry Baskets.
Fry Basket designed for use with the Fry Dispenser.
Funnels uncooked Fries to the accumulator area.
Dispenses bulk uncooked Fries to the accumulator area.
Provides a smooth surface for filled basket staging.
Removable for cleaning.
Amber slide rails.
Secures ultem to guide, 7 screws per ultem.
Provides a smooth surface for empty basket staging.
Removable for cleaning.
Amber slide rails.
Secures ultem to guide, 6 screws per ultem.
Transports baskets from the upper guide to lower guide.
Holds Fry Baskets on the Upper Guide when the Basket
Lift is not in the UP position.
Holds weighed Fries from the Hopper until a Fry Basket is in position to receive them.
Holds weighed Fries from the Hopper until a Fry Basket is in position to receive them.
Attachment for Lift Saddle.
Secures dovetail to lift cylinder.
Provides slip for Lift Dovetail on Arch Fry Dispenser face.
Guides the Hopper on and off of the Arch Fry Dispenser.
Guides the Hopper on and off of the Arch Fry Dispenser.
Allows locking the dispenser into place. ( Bolt on style )
“ “ “ ( Threaded style )
Detects a fry basket ready to receive fries.
Detects basket leaving the saddle and when the lower guide is full.

18 215606
19 216489
20 215607
21 215625
Lighted Pushbutton (Green)
Bulb (not shown)
Three Position Switch
Power Switch
1
1
1
1
Start/ Reset Button.
Replacement bulb for lighted Button.
Selects the Fry Load Size
Turns the Dispenser ON and OFF
2 Watts Regulator
1 4
AIR FILTER/REGULATOR (Part Number 202250)
Item Part Number Description
1 202604 Pressure Switch
(Watts only)
2 219017 Pressure Gauge
(SMC or Watts)
3 290095 Mist Separator with Auto
Drain (SMC Regulator)
4 202245 Mist Separator with Auto
Drain (Watts Regulator)
Qty Function
1 Monitors the air pressure, and detects a loss of pressure.
1
1
1
Displays the current system pressure. Assists in adjusting the regulator.
Automatically drains water and debris from the Air Line that may cause damage to the Arch Fry Dispenser.
Automatically drains water and debris from the Air Line that may cause damage to the Arch Fry Dispenser.

5
6
2
3
4
10
11
12
7
8
9
13
14
15
16
17
18
Item
1
213924
202250
203985
203984
202002
216595
215960
213107
213357
290688
213254
213254
216088
203983
290692
216044
Part
Number
213609
216482
213610
213478
202172
216089
213365
216485
213367
Description
Quick Coupler Nipple
Airline 100 Ft. 3/8” O.D.
Airline Quick Disconnect
Quick Disconnect Fitting
Power Cord
Stop Gate Cylinder
Fiber Optic Amplifiers #1-
#2
1
1
1
2
1.5 AMP Circuit Breaker
Load Cell Board
Solid State Relay 1
Filter/Regulator Assembly 1
Valve 1
Dispenser I/O Board
E-PROM, Loader 3.25R
Caster Rear
“ “
Lift Cylinder Switch
Lift Switch Bracket
Lift Cylinder
1
Fiber Optic Sensor #2 1
Fiber Optic Sensor #1 1
Door 1
2
2
2
2
1
Load Cell (Rebuilt)
Drum Motor
24VDC Power Supply
1
1
1
1
Qty Function
1
Connection point for the air line from the compressor.
Airline from compressor to Fry Dispenser
Disconnects airline from Fry Dispenser.
Adapts airline to Quick Disconnect.
Supplies the Arch Fry Dispenser with power from the wall
Air-operated cylinder that activates the stop gate.
Generates a red light for sensors #1-#2, and controls the sensitivity of the sensors, and inputs Fry Basket present to control card.
Protects the fry Drum Motor from electrical overload.
Translates information from the Load Cell into data that the Arch Fry Dispenser I/O Board computer can understand.
Provides high current drive to the drum motor.
Controls and monitors the pressure of the air supplied to the Arch Fry Dispenser.
Air valves that control cylinders in the Arch Fry
Dispenser.
I/O board that controls the Arch Fry Dispenser.
Software chip for I/O board.
Allow the dispenser to be moved. ( Bolt on style )
“ “ “ ( Threaded style )
Indicates the position of the Basket Lift mechanism.
Secures lift switch to lift cylinder.
Air-operated cylinder that moves the Lift Saddle in both
UP and DOWN directions.
Optic Sensor Head that detects baskets leaving the lift.
Optic Sensor Head that detects baskets in the lift.
Air-operated cylinder that opens and closes the
Accumulator Doors.
Electronic device that converts weight to an electrical signal.
Turns the Dispenser Drum that moves the bulk uncooked
Fries into the accumulator area.
Provides 24vdc power to the Fry Dispenser.