Table of Contents
Foreword by the Dean, Faculty of Mechanical Engineering,
Universiti Teknologi Malaysia
Foreword by the Conference Chair
Keynote Speakers
IMAT 2014 PROGRAMME SCHEDULE
Organising Committee
Acknowledgement
1
Foreword by the Dean of Faculty of Mechanical Engineering,
Universiti Teknologi Malaysia
On behalf of Universiti Teknologi Malaysia, I would like to welcome all participants to the 7th
IMAT. Thank you to you who have come to share your scientific research experience and
outcomes, committed yourselves towards the betterment of the world that we live in. I
hope that this meeting of like minds in the areas of thermofluids will create greater
consciousness of the necessity for researchers to work together and synergize our research
efforts with results that will benefit mankind in one way or another, directly or indirectly,
sooner or later.
Universiti Teknologi Malaysia, as one of the significant research universities in Malaysia that
focuses in the field of science and technology, has contributed much through its students
and academicians who have actively and relentlessly pursue their research interest. So
have you. It is hoped that this 2-day event with the sessions emphasizing on improvements
and optimization with theoretical, experimental, and numerical techniques in thermofluids,
will steer the directions of future research towards organized and systematic research
activities.
PROF. DR. NOORDIN BIN MOHD YUSOF
Dean
Faculty of Mechanical Engineering
Universiti Teknologi Malaysia
2
Foreword by the Conference Chair
I thank God AlMighty for this 7th IMAT that has been made possible through much effort
from our own academic staffs at Faculty of Mechanical Engineering, Universiti Teknologi
Malaysia (UTM). I am thankful for their cooperation and assistance, working with me as a
team in making this 7th IMAT a success. I am also grateful towards our partner universities;
National University of Singapore and Universiti Indonesia without which there would have
been no IMAT to begin with. I would like to thank all participants for taking part in this
event, for their contributions of knowledge in engineering the future of thermofluid
sciences.
Seven years have passed since the first humble beginning of the 1st IMAT held in UTM in
2008 with the intention of assisting our research students and academicians share their
latest findings in thermofluids. Since then many research opportunities in terms of ideas and
collaborations have emerged. I would like to call upon all participants to continue with our
research endeavor to move forward as we exchange ideas and knowledge towards
realizing a better environment through effective, efficient, and sustainable thermofluid
processes and systems.
ASSOC. PROF. DR. MAZLAN BIN ABDUL WAHID
Chairman of the 7th IMAT
Faculty of Mechanical Engineering
Universiti Teknologi Malaysia
3
Keynote Speakers
Progress and Challenges in the Development of Detonation Engines for Propulsion and
Power Production
Professor Frank K. Lu
University of Texas, Arlington
United State of America
Nanofluid in Thermal Transfer. Is it A Solution for The Future?
Professor Thierry Maré
Université Rennes, France
France
Prospects for Use of Solar Thermal Energy in High-Temperature Process Heat Applications
Associate Professor Hany Al-Ansary
King Saud University (KSU)
Saudi Arabia
4
IMAT 2014 PROGRAMME SCHEDULE
1700-1900
25 November 2014 (Tuesday): Pre-Registration
Grand Lotus Lobby, Level 2
DAY 1 : 26 NOVEMBER 2014 , WEDNESDAY
0730-0900
Registration
0900-0930
Opening Ceremony
0930-1010
1010-1045
Keynote 1
Progress and Challenges in the Development of Detonation Engines for Propulsion and Power Production
Professor Frank K. Lu
University of Texas, Arlington
Keynote 2
Nanofluid in Thermal Transfer. Is it A Solution for The Future?
Professor Thierry Maré
Université Rennes, France
1045-1100
Photo Session
1100-1130
Tea Break
5
SESSION 1
Room 1 (Lotus 2, Level 1)
Room 2 (Lotus 3, Level 2)
Room 3 (Dahlia, Level 2)
Room 4 (Orkid, Level 2)
Session 1A
Session 1B
Session 1C
Session 1D
ID : 10125
A Review in Alternative
Fuels in Flameless
Combustion
Ehsan Hamidi, Mazlan Bin
Abdul Wahid
Universiti Teknologi
Malaysia
ID: 1016
A CFD Simulation of
Indoor Air Contaminant
on Ventilation System in a
Bus Passenger
Compartment
Noor Emilia Ahmad
Shafie, Haslinda
Mohamed Kamar, Nazri
Kamsah
Universiti Teknologi
Malaysia
ID : 1053
A New Approach for
Ignition Timing Correction
in Spark Ignition Engines
Based on Cylinder
Tendency to Surface
Ignition
Ali Ghanaati, Mohd Farid
Muhamad Said, Intan Z.
Mat Darus, Amin
Mahmoudzadeh Andwari
Universiti Teknologi
Malaysia
ID : 10161
A Comparative Study on
The Structures of
Hydrothermally
Synthesized Fe, Cu and Ni
Based MOFs
Farrukh Israr, Yeongmin
Kim, Seung Jin O2, Kim
Choon Ng, Wongee Chun
Jeju National University,
Korea
1145-1200
ID: 1061
Alternative Lubricants:
Study on Plant-Based
Lubricants in Metal
Forming Process
M.A. Nurul,S. Syahrullail
Universiti Teknologi
Malaysia
ID : 1099
Decontamination and
Treatment Process for
Efficiency of HVAC
Building
Amirah Haziqah, Henry
Nasution, Azhar Abdul
Aziz, Zulkarnain Abdul
Latiff, Mohd Rozi Mohd
Perang, William R. Y,
Esther Elyena
Universiti Teknologi
Malaysia
ID : 1045
A Review on Butanol and
Ethanol Fuels in Internal
Combustion Engines
Abdullah Mustafa
Hamida, Zulkarnain Abdul
Latiff, Azhar Abdul Aziz,
Mohd Rozi Mohd Perang
Universiti Teknologi
Malaysia
ID : 1064
Analysis of Center Pivot
Irrigation System by
Experimental Method
Mohamad Nor Musa,
Muhammad Ariff Taha
Universiti Teknologi
Malaysia
1200-1215
ID : 1015
Characteristic of Oil Palm
Activated Carbon
Produced from
Microwave and
Conventional Heating
Fatimatul Zaharah Abas,
Farid Nasir Ani
Universiti Teknologi
Malaysia
ID : 10135
Energy Savings Potential
by Variable Speed Control
of Compressor for AirConditioning Systems
using PID Controller
Henry Nasution, Azhar
Abdul Aziz, Muchamad
Oktaviandri, Sulaimon
Shodiya, Sumeru
Universiti Teknologi
Malaysia
ID : 10190
An Overview on Flameless
Combustion Chamber
Designs and Performances
for Liquid and Solid Fuel
A. Kasani, M. Fahmi , M.A.
Wahid
Universiti Tun Hussein
Onn Malaysia
ID : 1054
1054Characterization of
Flat Sheet PD/AG
Membrane using Pure
Hydrogen
Hasan Mohd Faizal, Yuki
Kawasaki, Takeshi
Yokomori, Toshihisa Ueda
Keio University, Japan
1130-1145
6
1215-1230
ID : 1032
Effect of Air to Air Fixed
Plate Enthalpy Energy
Recovery Heat Exchanger
Flow Profile on Air
Conditioning System
Energy Recovery
Mohammad Shakir Nasif,
Rafat Al-Waked
Universiti Teknologi
PETRONAS, Malaysia
ID : 10101
Performance Analysis for
Vehicle Air Conditioning
System with Direct
Current Compressor in
Non-Electric Vehicle using
Fuzzy Logic Controller
Afiq Aiman Dahlan,
Amirah Haziqah Zulkifli,
Henry Nasution, Azhar
Abdul Aziz, Mohd Rozi
Mohd Perang
Universiti Teknologi
Malaysia
7
ID : 10187
Development of Pulse
Combustion Hot Water
Boiler
Izzwareed A., A. Dairobi
G.,M. A. Wahid and M. M.
Sies
Universiti Teknologi
Malaysia
ID : 1058
Design, Simulation and
Fabrication of
Polydimethylsiloxane
(PDMS) Microchannel for
Lab-on-Chip (LoC)
Applications
Abidin Ummikalsom,
Majlis Burhanuddin Yeop,
Yunas Jumril
Universiti Kebangsaan
Malaysia
SESSION 2
Room 1 (Lotus 2, Level 1)
Room 2 (Lotus 3, Level 2)
Room 3 (Dahlia, Level 2)
Room 4 (Orkid, Level 2)
Session 2A
Session 2B
Session 2C
Session 2D
1230-1245
ID : 10124
Electrical Generation
using Renewable
Technology for Remote
Area: A Review
Fatemeh Behrouzi , Adi
Maimun Abdul Malik,
Yasser Mohammed
Ahmed, Mehdi Nakisa
Universiti Teknologi
Malaysia
ID : 1017
Modeling and Parametric
Study of Cooling Loads
Characteristics for
Automotive AirConditioning System
JS Pau1, WKS Pao, SP
Yong, , PQ Memon
Universiti Teknologi
PETRONAS, Malaysia
ID : 10185
Experiments on
Combustion Kernel
Growth in Gaseous
Explosions
Mazlan Abdul Wahid,
Mohd Suardi Suhaimi,
Muaz Nadzri, Mohsin M.
Sies
Universiti Teknologi
Malaysia
ID : 1069
Effects of Different Load
with Vary Lubricant on
The Friction Coefficient
and Wear Rate Using Pin
on Disk Tribometer
S.Syahrullail ,N.Nuraliza
Universiti Teknologi
Malaysia
1245-1300
ID :10186
Exergy Analysis and
Exergoeconomic
Optimization with
Multiobjective Method of
Unit 4 Kamojang
Geothermal Power Plant
Nasruddin, Septian Khairul
Masdi, Arief Surachman
Universitas Indonesia
ID : 1036
Field Measurement of
Airborne Particulate
Matters Concentration in
A Hospital’s Operating
Room
Haslinda Mohamed
Kamar, Nazri Kamsah,
Wong Keng Yinn
Universiti Teknologi
Malaysia
ID : 1043
Flameless Combustion of
Biogas from Palm Oil Mill
Effluent
Seyed Ehsan Hosseini,
Ghobad Bagheri, Mazlan
Abdul Wahid
Universiti Teknologi
Malaysia
ID : 10108
Evaluation of Palm Olein
as Shaft Lubricant
N. Sapawe , S. Syahrullail,
F. Muhammad
Universiti Teknologi
Malaysia
1300-1315
ID : 10128
Exhaust Energy Recovery
with Turbo Compounding
in A Heavily Downsized
Engine
Alias Mohd Noor,
Rosnizam Che Puteh,
Muhammad Rabiu Abbas,
Srithar Rajoo, Muhammad
Hanafi Md Sah
Universiti Teknologi
Malaysia
ID : 10137
101761N Combustion of
Propane-Air Mixture in A
Laboratory Scale Burner
A. A. A. Abuelnuor, M. A.
Wahid, A. Saat, Khalid M.
Saqr .Mohsin Mohd. Sies
Universiti Teknologi
Malaysia
ID : 1037
Evaluation of Relative
Permeability Models in
CO2/Brine System using
Mixed and Hybrid Finite
Element Method
JS Pau, WKS Pao, SP Yong ,
PQ Memon
Universiti Teknologi
PETRONAS, Malaysia
ID : 10143
Investigation of The PMV
and TSV Models of
Thermal Comfort in AirConditioned University
Classrooms in Malaysia
Nur Atikah Shaari, Sheikh
Ahmad Zaki Shaikh Salim,
Mohamed Sukri Mat Ali,
Azli Abd Razak
Universiti Teknologi
Malaysia
8
1315-1330
ID : 1039
Humidity and Water
Effect on Wear
Characteristics of Disc
Braking System
Muhammad Faiz Fadzli
Abdul Mokti, Mohd
Kameil Abdul Hamid,
Abdul Rahim Abu Bakar
Universiti Teknologi
Malaysia
ID : 10151
Validation of a CFD NonNewtonian EulerianEulerian Model for
Predicting Wellbore Filter
Cake Formation
Ali I. Shehata, Mohamed
Shokry, Khalid M. Saqr,
Mohamed Shehadeh
Arab Academy for
Science, Technology and
Maritime Transport, Abu
Qir, Alexandria, EGYPT
1330-1430
ID : 1023
Fluidization of Gas-Solid in
Atmospheric Bubbling
Fluidized Bed Combustor
Rosyida Permatasari,
Tholudin Mat Lazim, Tono
Sukarnoto, Supriyadi,
University Kyai Tapa,
Jakarta, Indonesia
Lunch
9
ID : 1085
Experimental
Investigation on Contact
Angle of Sintered Copper
Powder Wick
Nandy Putra, Iwan
Setyawan, Dimas Raditya
University of Indonesia
SESSION 3
1430-1445
1445-1500
Room 1 (Lotus 2, Level 1)
Room 2 (Lotus 3, Level 2)
Room 3 (Dahlia, Level 2)
Room 4 (Orkid, Level 2)
Session 3A
Session 3B
Session 3C
Session 3D
ID : 10103
An Analytical Convergence
Study of The Forced Air
Cooling in Electronic
Packaging
K.A.Ong, M.Z Abdullah
Universiti Sains Malaysia
ID : 1050
Investigation of Heat
Transfer Enhancement in
The Corrugated Fin and
Tube Compact Heat
Exchangers
Ahmadali Gholami,
Mazlan Abdul Wahid,
Hussein A. Mohammed
Universiti Teknologi
Malaysia
ID : I082
Investigation on Potential
Working Fluids for
Waste Heat Recovery
Applications
Struzyna Ralf, Menne
Andreas, Steinmill Jens
Chair of Internal
Combustion Engines,
Ruhr-University Bochum,
Germany
ID : 1087
Flow Visualization of
Fractal Baffles and
Impellers for Stirred Tank
with a Single Stage 4Blade Rushton Turbine
Manshoor Bukhari,
Mokhranim Muhammad
Haziq, Zaman Izzuddin,
Khalid Amir
Universiti Tun Hussein
Onn Malaysia
ID : 10144
Development of A
Portable Low Cost Water
Purifier Utilising Solar
Desalination Technique
Z. A. Kamarulbaharin, M.
A. Aziz
Universiti Teknologi
MARA, Malaysia
ID: 10112
Investigation of InverseTurbulent-Prandtl
Number with Four RNG kε Turbulence Models on
Compressor Discharge
Pipe of Bioenergy Micro
Gas Turbine
Ahmad Indra
Siswantara,Budiarso,
Steven Darmawan
Universitas Indonesia
10
ID : 10104
Analysis of Porous
Layered Journal Bearing
Lubricated with Ferrofluid
T. V. V. L. N. Rao, A. M. A.
Rani, T. Nagarajan, F. M.
Hashim
Universiti Teknologi
PETRONAS, Malaysia
ID : 10117
Hydrate Formation in Two
Phase Flow in Pipe
William Pao, Fakhruldin
M. Hashim, Aklilu T.
Baheta,Sook-Harn Seng
Universiti Teknologi
PETRONAS, Malaysia
1500-1515
1515-1530
1530-1545
ID : 10132
Measurement of
Thermoelectric Potential
Coupling Coefficient for
Sandstone Rock Sample
Mohd Zaidi bin Jaafar1,
Abdul Razak Ismail ,
Mohamad Kamil bin
Saharuddin, Siti Mardhiah
binti Mohd Anuar, Siti
Rahmah bte Suradi,
Shaziera binti Omar
Universiti Teknologi
Malaysia
ID : 10155
Binder Influence on The
Water Adsorption Uptake
of Silica Gel
Ang Li, Kyaw Thu, Karan M
Sabnani, Kim Choon Ng
National University of
Singapore
ID : 1093
Hydrodynamic Resistance
Reduction of MultiPurpose Amphibious
Vehicle Due to Air Bubble
Effect
Adi Maimun, Mehdi
Nakisa, Yasser M. Ahmed,
Fatemeh Behrouzi, Koh K.
King, Agoes Priyanto
Universiti Teknologi
Malaysia
ID : 10188
Characteristics of Twophase Flow Heat Transfer
of R-22 and R-290 in
Horizontal Circular Small
Tube
A.S. Pamitran, U.
Khabibah, N. MohdGhazali, R. Ahmad, K.
Saito
University of Indonesia
ID : 10148
Numerical Investigation of
Heat Transfer
Enhancement in Adsorbed
Natural Gas Storage
Under the Dynamic
Conditions
Ybyraiymkul D.T, Kaltayev
A, Kim Choon Ng
Kazakh National
University
ID : 1088
CFD Simulation of Vortex
Induced Vibration of Two
Circular Cylinder in
Tandem Arrangements
Seyed Alireza Ghazanfari,
Mazlan Abdul Wahid, Adi
Maimun bin Abdul Malik,
Hussein A.Mohammed
Universiti Teknologi
Malaysia
ID : 1086
Impact of Adjacent
Building on Outdoor
Ventilation Around A
Layout of Two Buildings
Ayo Samuel Adinoyi,
Normah Mohd-Ghazali,
Shuhaimi Mansor
Universiti Teknologi
Malaysia
ID : 1075
Characterization of A
Short Microchannel
Device for Surface Cooling
Kamaruzaman N. B, Saat
A.
Universiti Teknologi
Malaysia
ID : 1034
Numerical Investigation of
Rectangular Twisted Hole
on Film Cooling for Gas
Turbine Blades
Aminuddin Saat, Ammar
Fakhir, Tholudin Mat
Lazim and Zaid Sattar
Kareem
Universiti Teknologi
Malaysia
ID : 10184
Characteristics of TwoPhase Flow Pressure Drop
of Propane in Horizontal
Circular Small Tube
A.S. Pamitran, S.
Novianto, T.A.
Simanjuntak,
Nasruddin,M.I. Alhamid
University of Indonesia
ID : 1079
Investigation of Physical
and Mechanical
Properties of 3-D
Turbulent Flow in Orifice
Pipe
Mohamed Abed Alabas
Siba, Wan Mohd Faizal
Wan Mahmood, Mohd
Zaki Nuawi, Rasidi Rasani,
Mohamed Nassir
Universiti Kebangsaan
Malaysia
ID : 1013
Dynamic Modeling of
Solar Air Collector with
Thermal Storage Material
Universiti Teknologi
PETRONAS, Malaysia
11
1545-1600
ID : 10189
Cost Estimation Study for
the Effect of Biofouling on
Engine Cooling System
Performance with an 8000
BHP Vessel
S.A. Adam, A.S. Pamitran,
Nasruddin, M.I. Alhamid
Universitas Indonesia
1600-1615
ID : 1091
Effect of Nozzle Vanes to
The Flow Field
Development in An
Automotive Mixed Flow
Turbocharger Turbine
M.H. Padzillah, R.F.
Martinez-Botas
Universiti Teknologi
Malaysia
ID : 1072
Numerical Study of Mixed
Convection Through
Horizontal Duct Utilizing
Al2O3
Nur Irmawati Om, H. A.
Mohammed
Universiti Tenaga
Nasional, Malaysia
ID : 10169
Comparison of Different
Neural Network Training
Algorithms for Wind
Velocity Forecasting
Morteza Khalaji Assadi,
Shervin Safaei
Universiti Teknologi
PETRONAS, Malaysia
ID: 1068
Performance of the Solar
Collector With Vacuum
Tube and Dual Heat Pipes
Based on Wick Length
Variation Nandy Putra,
Kristofer Haliansyah,
Wayan Nata Septiadi
Universiti Teknikal
Malaysia Melaka
ID : 1074
Comparison of Short
Microchannel
Performance using
Simulation Study and
Theoretical Calculation
Kamaruzaman N. B, Saat
A, Abang Zaidel D. N, Ida
Idayu Muhamad
Universiti Teknologi
Malaysia
ID : 1018
Development of Water
Hydraulic System
Mohd Noor Asril Saadun,
Ahmad Anas Yusof ,
Mohd Syukran Ismail ,
Mohd Khairi Mohamed
Nor, Muhammad Zaidan
Abdul Manaf, Mohd
Qadafie Ibrahim
University of Indonesia
1615-1630
1630-1645
Tea Break
12
ID : 1071
Multi-Layer Micro
Channels System:
Interpretation and
Developments
Husain Zaidan, Normah
Mohd Ghazali, Robiah
Ahmad
Universiti Teknologi
Malaysia
ID : 1052
NOX Characteristics in
Asymmetric Vortex
Combustion
Raid.A, Alwan, M.A.
Wahid, A.A.A.
Abuelnuorand Arkan.Al
Taie
Universiti Teknologi
Malaysia
ID : 10120
Numerical Investigation of
Turbulent Magnetic
Nanofluid Flow Inside
Straight Channels
Nor Azwadi Che Sidik,
Mohammed Raad
Abdulwahab
Universiti Teknologi
Malaysia
SESSION 4
1645-1700
Room 1 (Lotus 2, Level 1)
Room 2 (Lotus 3, Level 2)
Room 3 (Dahlia, Level 2)
Room 4 (Orkid, Level 2)
Session 4A
Session 4B
Session 4D
ID : 1065
Effectiveness of Jet
Impingement Cooling
System on Convex Surface
Mohamad Nor Musa,
Mohamad Faizal Fauzi
Universiti Teknologi
Malaysia
ID : 10166
Numerical Analysis of
Experimental Turbulent
Forced Convection
Heat Transfer for
Nanofluid Flow in a Tube
Viswanatha Sharma
Korada, W.H.Azmi,
Subhash Kamal
Universiti Teknologi
Petronas, Malaysia
Session 4C
ID : 10183
Effects of Non-Newtonian
Viscosity on The
Hemodynamics of
Cerebral Aneurysms
Ahmad elGibaly, Omar A.
El-Bassiouny, Omar Diaa
Aly I. Shehata, Tamer
Hassan, Khalid M. Saqr
College of Engineering
and Technology, Arab
Academy for Science,
Technology and Maritime
Transport Alexandria,
EGYPT
1700-1715
ID : 10163
Effects of The Optimized
Resonator Dimensions on
The Performance of The
Standing-Wave
Thermoacoustic
Refrigerator
Mawahib Hassan El-Fawal,
Normah Mohd-Ghazali,
Mohd-Shafiek Yaccob
University of Kordofan,
Elobied, Sudan
ID : 10153
Prediction of Annual
Performance of CPV
Systems using MultiJunction Solar Cells
Muhammad Burhan,
Seung Jin Oh, Muhammad
Wakil Shahzad, Young
Deuk Kim, Ng Kim Choon,
Wongee Chun
National University of
Singapore
ID : 10110
Effects of Two-Phase Flow
Friction Factor
Correlations on The
Optimal Pressure DropMartinelli Parameter Pair
in A Mini-Channel
Normah Mohd Ghazali,
Agus Sunjarianto
Pamitran, Oh Jong-Taek,
Robiah Ahmad,
Muhammad Khairul Fitkry
Rabin
Universiti Teknologi
Malaysia
1715-1730
ID : 10171
Effects of The Position of
Kitchen Hood Suction on
Thermal Comfort and
Carbon Dioxide Gas
Emission from An Urban
Residential Kitchen in
Developing Countries
M. Hamidur Rahman,
A.K.M. Sadrul Islam
Islamic University of
Technology, Board Bazar,
Gazipur, Bangladesh
ID : 1073
Simulation of Heat Flux
Effect in Straight Heat
Pipe as Passive Residual
Heat Removal System in
Light Water Reactor using
RELAP5 Mod 3.2
M. Hadi Kusuma, Nandy
Putra, Surip Widodo,
Anhar Riza Antariksawan
University of Indonesia
ID : 1059
Fabrication of UV-curing
Polyurethane
Methacrylate (PUMA)
Microchannel and Fluidics
Interconnect for
Microfluidics Applications
Abidin Ummikalsom,
Burhanuddin Yeop Majlis,
Yunas Jumril
Universiti Kebangsaan
Malaysia
13
ID : 1024
Numerical Simulation of
the Transient
Development of Slug Flow
in Horizontal Pipes
Zahid I. Al-Hashimya,
Hussain H. Al-Kayiem,
Mohammad S. Nasif,
Abdalellah O. Mohmmed
Universiti Teknologi
PETRONAS, Malaysia
ID : 10105
Numerical Study on Fluid
Structure Interaction of
Slug Flow in A Horizontal
Pipeline
Abdalellah Omer
Mohmmed, Mohammad
Shakir Nasif, Hussain
Hamoud Al-Kayiem, Zahid
Ibrahim Al-Hashimy
Universiti Teknologi
PETRONAS, Malaysia
ID : 10111
Optimal Frictional
Pressure Drop and Vapor
Quality Relationship of
Ammonia and R22 in TwoPhase Flow
Normah Mohd-Ghazali,Oh
Jong-Taek, Robiah Ahmad,
Nor Atikah Zolpakar
Universiti Teknologi
Malaysia
1730-1745
ID : 1084
Fabrication of Lotus-Type
Porous Copper using Slip
Casting and Sintering
Techniques for Heat Pipe
Applications
Sugeng Supriadi, Nandy
Putra, Bambang Ariantara,
Sunaryo, Dadit D.
Rahmanto
University of Indonesia
1745-1800
ID : 10140
Influence of Some
Parameters on ThermoHydrodynamic Fluid Flow
Behaviour of Solar
Chimney Power Plants
Toufik Chergui, Salah
Larbi, Amor Bouhdjar
Polytechnic National
School of Algiers, ALGERIA
1930-2200
ID : 10170
Simulation of Dynamical
Performance of Solar
Desiccant Cooling Cycle
Morteza Khalaji Assadi ,
Ali Mohammadi
Universiti Teknologi
PETRONAS, Malaysia
ID : 10156
Experimental Study of A
Laminar Flow Solid
Desiccant Dehumidifier
Driven by A Low
Temperature Heat Source
Seung Jin Oh, Kyaw Thu,
Muhammad Wakil
Shahzad, Wongee Chun,
Kim Choon Ng National
University of Singapore
ID : 10145
Simulation of Unsteady
Incompressible Flow using
A New Particle Method
Khai-Ching Ng, Syamimi
Mohd Yusoff , Yao-Hsin
Hwang
Tony Wen-Hann Sheu,
Mohd-Zamri Yusoff
Universiti Tenaga
Nasional,Malaysia
ID : 1041
Study of Turbulent
Convective Heat Transfer
Enhancement by Al2O3Water Nanofluid through
a Rough Circular Tube
M. Monjurul Ehsan, Shafi
Noor, Sayedus Salehin, A.
K. M. Sadrul Islam
Islamic University of
Technology, Board Bazar,
Gazipur, Bangladesh
CONFERENCE DINNER
SWISS-GARDEN HOTEL & RESIDENCES KUALA LUMPUR
14
DAY 2 : 27 NOVEMBER 2014 , THURSDAY
0900-1000
Keynote 3
Prospects for Use of Solar Thermal Energy in High-Temperature Process Heat Applications
Associate Professor Hany Al-Ansary
King Saud University (KSU)
1000-1030
Tea Break
SESSION 5
Room 1 (Lotus 2, Level 1)
Room 2 (Lotus 3, Level 2)
Room 3 (Dahlia, Level 2)
Session 5A
Session 5B
Session 5C
1030-1045
ID : 1056
Initial Study on Hydrogen
Permeation with Flat
Sheet Pd/Ag Membrane
for Mixture of Hydrogen
and Carbon Dioxide
Hasan Mohd Faizal, Yuki
Kawasaki, Takeshi
Yokomori, Toshihisa Ueda
Graduate School of
Science and Technology,
Keio University, Japan
ID : 1033
Single-Objective
Optimization of A
Thermoacoustic
Refrigerator
Nor Atiqah Zolpakar,
Normah Mohd Ghazali,
Robiah Ahmad
Universiti Teknologi
Malaysia
ID : 1019
Thermal Conductivity of
Carbon Nanotube Based
Nanofluids as Heat
Transfer Fluids
K.Y. Leong, Ibnorita Che
Ibrahim, Noor Hafizah
Amer, M.S. Risby
Universiti Pertahanan
Nasional Malaysia
1045-1100
ID : 10130
Investigation of
Performance and Fuel
Economy for Cylinder
Deactivation Engine at
Part Load Operation
S.F. Zainal Abidin, M.F.
Muhamad Said, A.A. Aziz,
M.A. Abas, N.I. Arishad
Universiti Teknologi
Malaysia
ID : 1028
Study of A Heat Pump for
Simultaneous Cooling and
Desalination
Byrne Paul, Ait Oumeziane
Yacine, Serres Laurent,
Mare Thierry
Université Européenne de
Bretagne
ID : 1077
Transient Analysis of
Microchannel Heat Sink
during Single Phase and
Flow Boiling Conditions
Yogesh K. Prajapati,
Manabendra Pathak,
Mohd. Kaleem Khan
Indian Institute of
Technology Patna, India
15
1100-1115
ID : 10109
Low Energy Nuclear
Reaction (LENR) –
Sustainable and Green
Energy: A Review
Md Zishan Akhter, M.A.
Hassan
Sharda University, India
ID : 1080
Theoretical Study of A
Novel Four-Chamber
Rotary Compressor:
Design and
Thermodynamic Analysis
Yahya Ahmed Alduqri, Md
Nor Musa
Universiti Teknologi
Malaysia
ID : 10114
Validation of Thermal
Modelling for the Back
Surface Temperature of a
Photovoltaic Module for
Hot and Humid Climate
Mohd Afzanizam Mohd
Rosli, Sohif Mat,
Kamaruzzaman Sopian,
Mohd Khairul Anuar
Sharif, M. Yusof Sulaiman,
Elias@Ilias Salleh
Universiti Teknikal
Malaysia Melaka
1115-1130
ID : 1042
Modeling of An Optimized
Hybrid Energy System for
Kutubdia Island,
Bangladesh
Sayedus Salehin, M.
Monjurul Ehsan, Shafi
Noor, A.K.M. Sadrul Islam
Islamic University of
Technology, Bangladesh
ID : 1063
Thermal Conductivity for
Mixture of Rice Husk Fiber
and Gypsum
Mohd Nor Musa,
Mohamed Fikhri Abdul
Aziz
Universiti Teknologi
Malaysia
ID : 1021
Solar Pumping System for
Rural Areas Water Supply
in Nigeria
Muhammadu Masin
Muhammadu
Federal University of
Technology, Nigeria
1130-1145
ID : 10126
Numerical Simulation of
Tangential Flow Flameless
Combustion
Ehsan Hamidi, Mazlan bin
Abdul Wahid
Universiti Teknologi
Malaysia
ID : 1067
Experimental Study on
Influence of Surfactant
Dosage on Micro
Explosion Occurrence in
Water in Diesel Emulsion
Mohammed Yahaya Khan,
Z.A. Abdul Karim, A.R.A.
Aziz, Isa M Tan
Universiti Teknologi
Petronas, Malaysia
ID : 10133
Study of Oxidation
Behavior of Thermal Spray
Coating on Superalloys at
900 °C
Subhash Kamal, KV
Sharma
Universiti Teknologi
Petronas, Malaysia
1145-1200
ID : 1076
Preliminary CFD
Investigation of Syngas
Combustion at Different
Operating Pressure
Norhaslina Mat Zian,
Hasril Hasini, Nur
Irmawati Om
Universiti Tenaga
Nasional, Malaysia
ID : 1029
Hydrodynamic Design of
New Type of Artificial
Reefs
O.B. Yaakob, Yasser M.
Ahmed, M. Rajali Jalal,
Faizul A.A., K.K. Koh,
Tarmizi J. Zaid
Universiti Teknologi
Malaysia
ID : 1022
The Deformation of
Human Eyeball When
Undergoing Scleral
Buckling
Zuhaila Ismail, Alistair Fitt,
Colin Please
Universiti Teknologi
Malaysia
16
1200-1215
1215-1230
1230-1245
1245-1300
ID : 10119
Simulation validation of
Hot Burned Gas Influences
on the Exhaust Emission
Characteristics of A TwoStroke Cycle Engine
Amin Mahmoudzadeh
Andwari, Azhar Abdul
Aziz, Mohd Farid
Muhamad Said,
Zulkarnain Abdul Latiff, Ali
Ghanaati
Universiti Teknologi
Malaysia
ID : 1044
The Effects of Inlet
Configuration on The
Thermal Efficiency and
Flame Stability of Lean
Hydrogen–Air Premixed
Micro-Combustion
Seyed Ehsan Hosseini,
Ghobad Bagheri, Mazlan
Abdul Wahid
Universiti Teknologi
Malaysia
ID : 10200
Performance
Enhancement of Tilt-Body
Micro Air Vehicle by Use
of Orthotropic Laminated
Proprotors
Mohd Zawawi Fazila, Lv
Peng, Prothin Sebastien,
Morlier Joseph, Benard
Emmanuel, Moschetta
Jean-Marc
ID : 1062
The Effect of Pits on The
Curvature Cup: for
Reducing Friction in Soft
on Hard Sliding Contact
Syahrullail Samion, Md
Razak Daud, Norzahir
Sapawe, Azli Yahya
Universiti Teknologi
Malaysia
ID : 10131
Optimization of Valve Lift
Profile for Engine with
Cylinder Deactivation
Izwan Hamid, Mohd Farid
Muhamad Said
Universiti Teknologi
Malaysia
ID : 1040
The Road Particle Effect
on Squeal Noise of Disc
Braking System
Muhammad Arsyad Abdul
Rahman, Mohd Kameil
Abdul Hamid, Ahmad
Razimi Mat Lazim
Universiti Teknologi
Malaysia
ID : 1060
The Influence of Modified
Air on Combustion
Characteristics in MesoScale Vortex Combustor
Mostafa Khaleghi, M.A.
Wahid, H.A. Mohammed
Universiti Teknologi
Malaysia
ID : 1081
Prediction and Analysis of
Building Energy Efficiency
using Artificial Neural
Network and Design of
Experiments
Sholahudin, Azimil Gani
Alam, Chang-In Baek,
Hwataik Han
Kookmin University, Korea
ID : 1066
The Use of Tertiary-ButylHydroquinone (TBHQ) in
Minimizing Oxidation
Effects on Palm Oil Based
Lubricant Using Four Ball
Tribotester
S. Syahrullail, P. Zulhanafi
Universiti Teknologi
Malaysia
ID : 1090
Validation of A Benchmark
Methanol Flame using
Open FOAM
Mohd Yasin Mohd Fairus,
Cant Stewart
Universiti Teknologi
Malaysia
ID : 10158
Prediction of Gas Hydrate
Formation using Radial
Basis Function Network
and Support Vector
Machines
Abdulwehab A. Ibrahim,
Tamiru Alemu Lemma,
Moey Lip Kean, Mesfin
Gizaw Zewge
INTI International
University, Malaysia
1300-1400
Lunch
17
ORGANISING COMMITTEE
Patron:
Prof. Datuk Ir. Dr. Wahid Bin Omar
Advisor:
Professor Ir. Dr. Roslan Abdul Rahman
Professor Dr. Noordin Mohd Yusof
Conference Chairman:
Assoc. Prof. Dr. Mazlan Abdul Wahid
Secretary:
Assoc. Prof. Dr. Syahrullail Samion
Technical Committee:
Assoc. Prof. Dr. Nazri Kamsah
Assoc. Prof. Dr. Kahar Osman
Assoc. Prof. Dr. Nor Azwadi Che Sidik
Assoc. Prof. Dr. Normah Mohd Ghazali
Dr. Haslinda Mohamed Kamar
Dr. Zulkanain Abdul Latiff
Dr. Aminuddin Saat
Dr. Mohd Farid Mohd Said
Dr. Henry Nasution
Dr. Mohd Yusoff Senawi
Dr. Mohd Fairuz Mohd Yasin
Mr. Mohsin Sies
Mrs. Natrah Kamaruzaman
18
ACKNOWLEDGEMENT
The Organising Committee of the 7th International Meeting on Advances in Thermofluids
would like to express our sincere gratitude to the following for their help, support and generous
contribution :
Prof. Datuk Ir. Dr. Wahid Bin Omar
Vice-Chancellor UTM
Faculty of Mechanical Engineering, Universiti Teknologi Malaysia
National University of Singapore
University of Indonesia
Taat Bestari Sdn. Bhd
Malakoff Corporation Berhad
IPM Engineering Sdn. Bhd.
UTM Innovation & Commercialisation Centre
Presenters and Participants
and to everyone who has made this conference a successful event
THANK YOU
19
SPONSORS
Area Of Expertise
 Laboratory Design For Fume Hood, Lab Bench and Cabinets
 Custom Made For Furnace, Hydraulic Press and Glassware
 Injection Moulding
 Tribology
 Metallography
 Material Testing
 Powder Metalllurgy
 Bioindustry
 Fluid Mechanics

For more info, please contact: Shah Rizal Saupi email: shahrizal@taatbestari.com
20
21
___________________________________
We specialise in:
Civil & Structural Design
Geotechnical Design
Green Building Index
Project Management
_________________________________
22