A&A Machinery Sales, Surplus Injection Molding Equipment
www.AAMachinery.com
USA Auction Calendar
Timed Auction:
Starts: September 9th, 2011 @ 10:00 AM USCT USCT CDT
Ends: September 20, 2011 @ 12:51 PM
Picture
Item Name
Lot: 1 : HUSKY 600 TON INJECTION MOLDING MACHINE MODEL: X820RS S/N:8058,
DESCRIPTION: 90 oz shot, Hydraulic Clamping, Tie Bar Spacing 32.2"x32.2", Overall Platen Size
48"x48", 6-Zone, Microprocessor Controls, 75-HP Main Motor, Nitrogen Gas Charged
Hydraulic Accumulator, 460 V, 3 ph, Heaters 230 V, 124 Kw, Controls: 110 V, Pump 112 Kw,
Total Motor 112 Kw, 35'4"L x 7'6"W x 8'4"H, approx 65,000 lbs REF#541, LOCATION: North
Andover, MA, LOADING FEE (for domestic shipping): $2500
Lot: 2 : HUSKY 600 TON INJECTION MOLDING MACHINE MODEL: X820RS S/N:8056,
DESCRIPTION: 90 oz shot, Hydraulic Clamping, Tie Bar Spacing 32.2"x32.2", Overall Platen Size
48"x48", 6-Zone, Microprocessor Controls, 75-HP Main Motor, Nitrogen Gas Charged
Hydraulic Accumulator, 460 V, 3 ph, Heaters 230 V, 124 Kw, Controls: 110 V, Pump 112 Kw,
Total Motor 112 Kw, 35'4"L x 7'6"W x 8'4"H, approx 65,000 lbs REF#542, LOCATION: North
Andover, MA, LOADING FEE (for domestic shipping): $2500
Lot: 3 : HUSKY 600 TON INJECTION MOLDING MACHINE MODEL: X820RS S/N:8061,
DESCRIPTION: 90 oz shot, Hydraulic Clamping, Tie Bar Spacing 32.2"x32.2", Overall Platen Size
48"x48", 6-Zone, Microprocessor Controls, 75-HP Main Motor, Nitrogen Gas Charged
Hydraulic Accumulator, 460 V, 3 ph, Heaters 230 V, 124 Kw, Controls: 110 V, Pump 112 Kw,
Total Motor 112 Kw, 35'4"L x 7'6"W x 8'4"H, approx 65,000 lbs REF#543, LOCATION: North
Andover, MA, LOADING FEE (for domestic shipping): $2500
Lot: 4 : GOLDSTAR 496 TON INJECTION MOLDING MACHINE MODEL: IDE500EN
S/N:N94500E3702, 3/94 DESCRIPTION: 32" BETWEEN TIE RODS, 62.7 OZ SHOT (DUE TO
BATTERY FAILURE, MACHINE WILL REQUIRE REINSTALLATION OF PROGRAM) REF#14876,
LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $400
Picture
Item Name
Lot: 5 : CINCINNATI MILACRON 375 TON INJECTION MOLDING MACHINE MODEL: 375-32 E/P
S/N:4073A21/85-6 , DESCRIPTION: 32 OZ SHOT, fully upgraded control system with Allen
Bradely PL5, Closed loop system, and Wonderware operator control software package
REF#2096, LOCATION: Omaha, NE, LOADING FEE (for domestic shipping): $1500
Lot: 6 : CINCINNATI MILACRON 250 TON INJECTION MOLDING MACHINE MODEL: 250 TON
S/N:4002A21/80-62, DESCRIPTION: 22x22 Tiebar spacing 12 oz shot size, fully upgraded
control system with Allen Bradely PL5, Closed loop system, and Wonderware operator control
software package, with Ranger Sprue Picker Robot, Una-Dyn Vacuum Hopper and Una-Dyn
Dryer REF#2116a-c, LOCATION: Omaha, NE, LOADING FEE (for domestic shipping): $1250
Lot: 7 : CINCINNATI MILACRON 250 TON INJECTION MOLDING MACHINE MODEL: 250 TON
S/N:4002J20776-35, DESCRIPTION: 20x20 Tiebar spacing 12 oz shot size, fully upgraded
control system with Allen Bradely PL5, Closed loop system, and Wonderware operator control
software package, hrs 19572, With Ranger Sprue Picker Robot, Una-Dyn Vacuum Hopper and
Una-Dyn Dryer REF#2117a-c, LOCATION: Omaha, NE, LOADING FEE (for domestic shipping):
$1250
Lot: 8 : CINCINNATI MILACRON 250 TON INJECTION MOLDING MACHINE MODEL: 250 TON
S/N:n/a, DESCRIPTION: 20x20 Tiebar spacing 12 oz shot size, fully upgraded control system
with Allen Bradely PL5, Closed loop system, and Wonderware operator control software
package, hrs 15655, With Ranger Sprue Picker Robot, Una-Dyn Vacuum Hopper and Una-Dyn
Dryer REF#2118a-c, LOCATION: Omaha, NE, LOADING FEE (for domestic shipping): $1250
Lot: 9 : CINCINNATI MILACRON 250 TON INJECTION MOLDING MACHINE MODEL: 250 TON
S/N:4002A21/80-15 , DESCRIPTION: 22x22 Tiebar spacing 12 oz shot size, fully upgraded
control system with Allen Bradely PL5, Closed loop system, and Wonderware operator control
software package w/ Ranger Sprue Picker Robot, Conair Hopper and Una-Dyn Dryer
REF#2119a-c, LOCATION: Omaha, NE, LOADING FEE (for domestic shipping): $1250
Picture
Item Name
Lot: 10 : CINCINNATI MILACRON 150 TON INJECTION MOLDING MACHINE MODEL: 150 TON
S/N:n/a, DESCRIPTION: 16"x16" Tiebar spacing 6 oz shot size, fully upgraded control system
with Allen Bradely PL5, Closed loop system, and Wonderware operator control software
package, hrs 51418.3, With Ranger Sprue Picker Robot REF#2106a, LOCATION: Omaha, NE,
LOADING FEE (for domestic shipping): $950
Lot: 11 : CINCINNATI MILACRON 150 TON INJECTION MOLDING MACHINE MODEL: 150 TON
S/N:4001A21/79-18, DESCRIPTION: 16"x16" Tiebar spacing 6 oz shot size, fully upgraded
control system with Allen Bradely PL5, Closed loop system, and Wonderware operator control
software package, hrs 34757.4 w/ With Ranger Sprue Picker Robot & GC Ind. Chiller
REF#2107a-b, LOCATION: Omaha, NE, LOADING FEE (for domestic shipping): $950
Lot: 12 : CINCINNATI MILACRON 150 TON INJECTION MOLDING MACHINE MODEL: 150 TON
S/N:4001A21/80-24, DESCRIPTION: 16"x16" Tiebar spacing 6 oz shot size, fully upgraded
control system with Allen Bradely PL5, Closed loop system, and Wonderware operator control
software package, hrs 37393.4 w/ Ranger Sprue Picker Robot REF#2108a, LOCATION: Omaha,
NE, LOADING FEE (for domestic shipping): $950
Lot: 13 : CINCINNATI MILACRON 150 TON INJECTION MOLDING MACHINE MODEL: 150 TON
S/N:4001A21/79-17, DESCRIPTION: 16"x16" Tiebar spacing 6 oz shot size fully upgraded
control system with Allen Bradely PL5, Closed loop system, and Wonderware operator control
software package, hrs 25328.5, w/ Yushin Robot REF#2109a, LOCATION: Omaha, NE, LOADING
FEE (for domestic shipping): $950
Lot: 14 : CINCINNATI MILACRON 150 TON INJECTION MOLDING MACHINE MODEL: 150 TON
S/N:4001A21/80-13, DESCRIPTION: 16"x16" Tiebar spacing 6 oz shot size, fully upgraded
control system with Allen Bradely PL5, Closed loop system, and Wonderware operator control
software package, hrs 40433.4, With Ranger Sprue Picker Robot REF#2114a, LOCATION:
Omaha, NE, LOADING FEE (for domestic shipping): $950
Picture
Item Name
Lot: 15 : CINCINNATI MILACRON 150 TON INJECTION MOLDING MACHINE MODEL: 150 TON
S/N:n/a, DESCRIPTION: 16"x16" Tiebar spacing 6 oz shot size, fully upgraded control system
with Allen Bradely PL5, Closed loop system, and Wonderware operator control software
package, hrs 24102 With Ranger Sprue Picker Robot REF#2115a, LOCATION: Omaha, NE,
LOADING FEE (for domestic shipping): $950
Lot: 16 : CINCINNATI MILACRON 150 TON INJECTION MOLDING MACHINE MODEL: 150 TON
S/N:4001A21/79-17, DESCRIPTION: 16"x16" Tiebar spacing 6 oz shot size, fully upgraded
control system with Allen Bradely PL5, Closed loop system, and Wonderware operator control
software package, hrs 25885.1 With Ranger Sprue Picker Robot REF#2110a, LOCATION:
Omaha, NE, LOADING FEE (for domestic shipping): $950
Lot: 17 : ENGEL 85 TON INJECTION MOLDING MACHINE MODEL: EJ330/85 S/N:5235-085-92,
1992 DESCRIPTION: 6.5 ounce shotsize, Power 460 volt 3 Phase 42 amp, Approximate weight
9000# REF#14612, LOCATION: Greeneville TN, LOADING FEE (for domestic shipping): $500
Lot: 18 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:265458-S, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71"
STROKE, 16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA (more specs from the
manufacturer can be provided upon request: ssmith@aamachinery.com) REF#2120a,
LOCATION: Omaha, NE, LOADING FEE (for domestic shipping): $800
Lot: 19 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:n/a, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71" STROKE,
16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA (more specs from the manufacturer can
be provided upon request: ssmith@aamachinery.com) REF#2121a, LOCATION: Omaha, NE,
LOADING FEE (for domestic shipping): $800
Picture
Item Name
Lot: 20 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:265464-S, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71"
STROKE, 16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA, W/ RANGER ROBOT SPR-60T
(more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2123a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Lot: 21 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:265465-S, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71"
STROKE, 16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA, W/ RANGER ROBOT SPR-60T
(more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2124a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Lot: 22 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:465466-S, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71"
STROKE, 16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA, W/ RANGER ROBOT SPR-60T
(more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2125a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Lot: 23 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:465467-S, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71"
STROKE, 16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA, W/ RANGER ROBOT SPR-60T
(more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2127a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Lot: 24 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:265455-S, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71"
STROKE, 16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA, W/ RANGER ROBOT SPR-60T
(more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2129a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Picture
Item Name
Lot: 25 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:265490-S, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71"
STROKE, 16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA, W/ RANGER ROBOT SPR-60T
(more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2130a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Lot: 26 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:265493, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71"
STROKE, 16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA, W/ RANGER ROBOT SPR-60T
(more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2131a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Lot: 27 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:265492, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71"
STROKE, 16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA, W/ RANGER ROBOT SPR-60T
(more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2132a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Lot: 28 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:265491, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71"
STROKE, 16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA, W/ RANGER ROBOT SPR-60T
(more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2133a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Lot: 29 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:265494, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71"
STROKE, 16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA, W/ RANGER ROBOT SPR-60T
(more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2134a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Picture
Item Name
Lot: 30 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:265462-S, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71"
STROKE, 16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA, W/ RANGER ROBOT SPR-60T
(more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2135a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Lot: 31 : FERROMATIK MILACRON 83 TON INJECTION MOLDING MACHINE MODEL: K75
S/N:n/a, 1994 DESCRIPTION: 3.45 OZ SHOT (75 METRIC TON), IQT-3 CONTROL, 17.71" STROKE,
16.53" X 16.53 BETWEEN TIE BARS, 1.378" SCREW DIA, W/ RANGER ROBOT SPR-60T (more
specs from the manufacturer can be provided upon request: ssmith@aamachinery.com)
REF#2136a, LOCATION: Omaha, NE, LOADING FEE (for domestic shipping): $800
Lot: 32 : FERROMATIK MILACRON 55 TON INJECTION MOLDING MACHINE MODEL: K50
S/N:245237, 1995 DESCRIPTION: 2.54 OZ SHOT (50 METRIC TON), 13.78 STROKE, 13.98" X
13.98" BETWEEN TIE BARS, 1.181" SCREW DIA, 20 HP PUMP DRIVE W/ RANGER ROBOT
MODEL SPR-60T (more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2137a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Lot: 33 : FERROMATIK MILACRON 55 TON INJECTION MOLDING MACHINE MODEL: K50
S/N:25193-S, 1994 DESCRIPTION: 2.54 OZ SHOT (50 METRIC TON), 13.78 STROKE, 13.98"
BETWEEN TIE BARS, 1.181" SCREW DIA, 20 HP PUMP DRIVE W/ RANGER ROBOT MODEL SPR60T (more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2138a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Lot: 34 : FERROMATIK MILACRON 55 TON INJECTION MOLDING MACHINE MODEL: K50
S/N:24512, 1994 DESCRIPTION: 2.54 OZ SHOT (50 METRIC TON), 13.78 STROKE, 13.98"
BETWEEN TIE BARS, 1.181" SCREW DIA, 20 HP PUMP DRIVE W/ RANGER ROBOT MODEL SPR60T (more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2139a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Picture
Item Name
Lot: 35 : FERROMATIK MILACRON 55 TON INJECTION MOLDING MACHINE MODEL: K50
S/N:245239, 1996 DESCRIPTION: 2.54 OZ SHOT (50 METRIC TON), 13.78 STROKE, 13.98"
BETWEEN TIE BARS, 1.181" SCREW DIA, 20 HP PUMP DRIVE W/ RANGER ROBOT MODEL SPR60T (more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2140a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Lot: 36 : FERROMATIK MILACRON 55 TON INJECTION MOLDING MACHINE MODEL: K50
S/N:245238, 1995 DESCRIPTION: 2.54 OZ SHOT (50 METRIC TON), 13.78 STROKE, 13.98"
BETWEEN TIE BARS, 1.181" SCREW DIA, 20 HP PUMP DRIVE W/ RANGER ROBOT MODEL SPR60T (more specs from the manufacturer can be provided upon request:
ssmith@aamachinery.com) REF#2141a, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $800
Lot: 37 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15614,
1994 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 35,085 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12616, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 39 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:16714,
1995 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 77,497 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12620, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 40 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:16715,
1995 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 72,039 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12625, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Picture
Item Name
Lot: 41 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:16705,
1995 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 54,986 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12628, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 42 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15626,
1994 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 89,609 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12629, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 43 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15618,
1994 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 61,965 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12631, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 44 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:16706,
1995 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 47,180 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12633, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 45 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15610,
1994 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 54,987 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12634, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Picture
Item Name
Lot: 46 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15617,
1994 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 41,096 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12635, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 47 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15719,
1994 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 58,931 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12638, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 48 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15718,
1994 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 77,221 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12639, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 49 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15625,
1994 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 57,502 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12640, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 50 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15622,
1994 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 79,684 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12641, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Picture
Item Name
Lot: 51 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15632,
1994 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 73,656 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12642, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 52 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15631,
1994 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 56,615 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12643, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 53 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15621,
1994 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 58,990 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12645, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 54 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15717,
1994 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 56,279 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12647, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Lot: 55 : BATTENFELD 44 TON INJECTION MOLDING MACHINE MODEL: BA400CDC S/N:15815,
1993 DESCRIPTION: SHOT SIZE 1.89 Oz, 19.25” x 19.25” PLATENS, 12.5” x 12.5” BETWEEN TIE
BARS, UNILOG 4000 CNC CONTROL, HOURS 80,987 (the "mold quick change" has been
removed and does not affect the machine's function.) REF#12648, LOCATION: Greeneville TN,
LOADING FEE (for domestic shipping): $350
Picture
Item Name
Lot: 56 : FERROMATIK MILACRON 33 TON INJECTION MOLDING MACHINE MODEL: K30
S/N:225109-S, 1994 DESCRIPTION: 1.45 OZ SHOT (30 METRIC TON), 13.77" STROKE,
19.9"X19.69" BETWEEN TIE BARS, .984" SCREW DIA, 10 HP PUMP DRIVE, W/ YUSHIN SPRUE
PICKER MODEL HOPIII-A550 (more specs from the manufacturer can be provided upon
request: ssmith@aamachinery.com) REF#2143a, LOCATION: Omaha, NE, LOADING FEE (for
domestic shipping): $600
Lot: 57 : FERROMATIK MILACRON 33 TON INJECTION MOLDING MACHINE MODEL: K30
S/N:225110-S, 1994 DESCRIPTION: 1.45 OZ SHOT (30 METRIC TON), 13.77" STROKE,
19.9"X19.69" BETWEEN TIE BARS, .984" SCREW DIA, 10 HP PUMP DRIVE, W/ YUSHIN SPRUE
PICKER MODEL HOPIII-A550 (more specs from the manufacturer can be provided upon
request: ssmith@aamachinery.com) REF#2144a, LOCATION: Omaha, NE, LOADING FEE (for
domestic shipping): $600
Lot: 58 : FERROMATIK MILACRON 33 TON INJECTION MOLDING MACHINE MODEL: K30
S/N:255106-S, 1994 DESCRIPTION: 1.45 OZ SHOT (30 METRIC TON), 13.77" STROKE,
19.9"X19.69" BETWEEN TIE BARS, .984" SCREW DIA, 10 HP PUMP DRIVE, W/ YUSHIN SPRUE
PICKER MODEL HOPIII-A550 (more specs from the manufacturer can be provided upon
request: ssmith@aamachinery.com) REF#2145a, LOCATION: Omaha, NE, LOADING FEE (for
domestic shipping): $600
Lot: 59 : NEWBURY 30 TON VERTICAL INJECTION MOLDING MACHINE MODEL: V-530BRS
S/N:12-9062-30KS-94, DESCRIPTION: DIMS: 150” x 48” x 72”, WT – 2500lbs, Newbury
Controls, 460/3/60, Approx 42" rotary table REF#12600, LOCATION: Morrisville, PA , LOADING
FEE (for domestic shipping): $350
Lot: 60 : BATTENFELD 17 TON INJECTION MOLDING MACHINE MODEL: BA150CDC PLUS
S/N:11935, 1990 DESCRIPTION: SHOT SIZE 1.2 Oz, 13” x 12.75” PLATENS, 7.25” x 6” BETWEEN
TIE BARS, UNILOG 4000, SOLID STATE CONTROL, HOURS 99991, 2 Comet SD-25-1 & Comet AD25-2 hopper dryer units (the "mold quick change" has been removed and does not affect the
machine's function.) REF#12601, LOCATION: Greeneville TN, LOADING FEE (for domestic
shipping): $350
Picture
Item Name
Lot: 61 : BATTENFELD 17 TON INJECTION MOLDING MACHINE MODEL: BA150CDC PLUS
S/N:11923, 1990 DESCRIPTION: SHOT SIZE 1.2 Oz, 13” x 12.75” PLATENS, 7.25” x 6” BETWEEN
TIE BARS, UNILOG 4000 SOLID STATE CONTROL, HOURS 13240, 2 Comet SD-25-1 & Comet AD25-2 hopper dryer units (the "mold quick change" has been removed and does not affect the
machine's function.) REF#12605, LOCATION: Greeneville TN, LOADING FEE (for domestic
shipping): $350
Lot: 63 : BATTENFELD 17 TON INJECTION MOLDING MACHINE MODEL: BA150CDC PLUS
S/N:11922, 1990 DESCRIPTION: SHOT SIZE 1.2 Oz, 13” x 12.75” PLATENS, 7.25” x 6” BETWEEN
TIE BARS, UNILOG 4000 SOLID STATE CONTROL, HOURS 68312, 2 Comet SD-25-1 & Comet AD25-2 hopper dryer units (the "mold quick change" has been removed and does not affect the
machine's function.) REF#12611, LOCATION: Greeneville TN, LOADING FEE (for domestic
shipping): $350
Lot: 64 : BATTENFELD 17 TON INJECTION MOLDING MACHINE MODEL: BA150CDC PLUS
S/N:13011, 1991 DESCRIPTION: SHOT SIZE 1.2 Oz, 13” x 12.75” PLATENS, 7.25” x 6” BETWEEN
TIE BARS, UNILOG 4000 SOLID STATE CONTROL, HOURS 68312, 2 Comet SD-25-1 & Comet AD25-2 hopper dryer units (the "mold quick change" has been removed and does not affect the
machine's function.) REF#12613, LOCATION: Greeneville TN, LOADING FEE (for domestic
shipping): $350
Lot: 65 : BATTENFELD THERMOSET MOLDING PRE PLASTICIZER MODEL: BPE60 S/N:n/a,
DESCRIPTION: 60 HZ, 230/460 VOLTS, 3PH, 3 KW REF#12560, LOCATION: Morrisville, PA ,
LOADING FEE (for domestic shipping): $75
Lot: 66 : BATTENFELD THERMOSET MOLDING PRE PLASTICIZER MODEL: BPE60 S/N:n/a,
DESCRIPTION: 60 HZ, 230/460 VOLTS, 3PH, 3 KW REF#12561, LOCATION: Morrisville, PA ,
LOADING FEE (for domestic shipping): $75
Picture
Item Name
Lot: 67 : BATTENFELD THERMOSET MOLDING PRE PLASTICIZER MODEL: BPE60 S/N:n/a,
DESCRIPTION: 60 HZ, 230/460 VOLTS, 3PH, 3 KW REF#12562, LOCATION: Morrisville, PA ,
LOADING FEE (for domestic shipping): $75
Lot: 68 : BATTENFELD THERMOSET MOLDING PRE PLASTICIZER MODEL: BPE60 S/N:n/a,
DESCRIPTION: 60 HZ, 230/460 VOLTS, 3PH, 3 KW REF#12575, LOCATION: Morrisville, PA ,
LOADING FEE (for domestic shipping): $75
Lot: 69 : BATTENFELD THERMOSET MOLDING PRE PLASTICIZER MODEL: BPE60 S/N:n/a,
DESCRIPTION: 60 HZ, 230/460 VOLTS, 3PH, 3 KW REF#12577, LOCATION: Morrisville, PA ,
LOADING FEE (for domestic shipping): $75
Lot: 70 : BATTENFELD THERMOSET MOLDING PRE PLASTICIZER MODEL: BPE60 S/N:n/a,
DESCRIPTION: 60 HZ, 230/460 VOLTS, 3PH, 3 KW REF#12578, LOCATION: Morrisville, PA ,
LOADING FEE (for domestic shipping): $75
Lot: 71 : BATTENFELD THERMOSET MOLDING PRE PLASTICIZER MODEL: BPE 60 S/N:n/a,
DESCRIPTION: LIGHT AND DARK GREEN, 240/480 VOLTS, 3KW REF#12579, LOCATION:
Morrisville, PA , LOADING FEE (for domestic shipping): $75
Picture
Item Name
Lot: 72 : BATTENFELD THERMOSET MOLDING PRE PLASTICIZER MODEL: BPE 60 S/N:53400,
35947 DESCRIPTION: ALLEN BRADLEY CONTROLS, 230 /380 VOLT, 3 PHASE, 3 KW REF#12580,
LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $75
Lot: 73 : BATTENFELD THERMOSET MOLDING PRE PLASTICIZER MODEL: BPE60 S/N:n/a,
DESCRIPTION: ALL GREEN, ALLEN BRADLEY CONTROLS, 230 VOLTS, 60 HZ, 3 PHASE, 3 KW
REF#12581, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $75
Lot: 74 : BATTENFELD THERMOSET MOLDING PRE PLASTICIZER MODEL: BPE60 S/N:n/a,
DESCRIPTION: ALL GREEEN, 240 VOLTS, 3KW, 3 PHASE, ALLEN BRADLEY CONTROLS
REF#12582, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $75
Lot: 75 : CULLIGAN REVERSE OSMOSIS SYSTEM MODEL: KP-120 S/N:8107, DESCRIPTION: 30
hp, 460 V , Culligan Flow Monitor: Model M4108T, S/N: 050419, Tomko Flo Pumps: model
SS852E18-80360, S/N: 89116020R-1, Goulds Pumps, Model 3996 REF#6099, LOCATION:
Omaha, NE, LOADING FEE (for domestic shipping): $600
Lot: 76 : RANGER AUTOMATION Pick and Place Robotic System MODEL: SA-1000S5 S/N:R10552, DESCRIPTION: 4 Axis Servo Control, “Teachable Robot”, Y=36", Z=44", X=108" (approx)
REF#10420, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $250
Picture
Item Name
Lot: 77 : RANGER AUTOMATION Pick and Place Robotic System MODEL: SA-1000S5, SA1000S4/F S/N:N/A, DESCRIPTION: 4 Axis Servo Control, “Teachable Robot”,Y=35", Z=48", Z=11'
(approx) REF#10426, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $250
Lot: 78 : RANGER AUTOMATION Pick and Place Robotic System MODEL: SA-1000S5 S/N:R10553 , DESCRIPTION: 4 Axis Servo Control, “Teachable Robot”,X=48", X=11', Y=35" (approx)
REF#10435, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $250
Lot: 78a : KAWASAKI Pick and Place Robotic System, 6 AXIS MODEL: UX070FA002
S/N:53010R0S1S, 1995 DESCRIPTION: 155 lb lift cap w/ teach pendant contol & controller,
39,799.4 HRS, 460 VAC REF#10690-10691, LOCATION: , LOADING FEE (for domestic shipping):
$750
Lot: 78b : KAWASAKI Pick and Place Robotic System, 6 AXIS MODEL: UX070FA72 S/N:L0001,
1995 DESCRIPTION: 155 lb lift cap w/ teach pendant contol & controller, 28,072 HRS, 460 VAC
REF#10692-10693, LOCATION: , LOADING FEE (for domestic shipping): $750
Lot: 78c : KAWASAKI Pick and Place Robotic System, 6 AXIS MODEL: UT120F S/N:30015, 1995
DESCRIPTION: 265 lb cap lift w/ teaching pendant control & controller, 49,167.7 HRS, 460 VAC
REF#10694-10696, LOCATION: , LOADING FEE (for domestic shipping): $750
Picture
Item Name
Lot: 78d : KAWASAKI Pick and Place Robotic System, 6 AXIS MODEL: UT120F S/N:L0014, 1995
DESCRIPTION: 265 lb cap lift w/ teaching pendant control & controller, 460 VAC, 48,347.9 HRS
REF#10683-10685, LOCATION: , LOADING FEE (for domestic shipping): $750
Lot: 79 : Automated Assemblies, Flexible Automation Robot, Sailor Robotic System Pick and
Place Robotic System MODEL: RZ-100 SLV S/N:3344, 1987 DESCRIPTION: Control: F2-40, s/n C87070 12811, 110 v REF#12152, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $100
Lot: 80 : COOLING TOWER WATER, HEAT EXCHANGER SKID MODEL: n/a S/N:n/a, 1995
DESCRIPTION: TO INCLUDE: Heat Exchanger: Bell & Gossett, Modle GPX 646-133, S/N:
95A5432101, (2) 40 hp Motors, 2VF200TTUP-0260CV, (2) Bell & Gossett Diffuser Model GG#
max temp 250 F, max pressure 175 PSI REF#2158, LOCATION: Omaha, NE, LOADING FEE (for
domestic shipping): $1200
Lot: 81 : COOLING TOWER WATER, HEAT EXCHANGER SKID MODEL: n/a S/N:n/a, 1992
DESCRIPTION: TO INCLUDE: Heat Exchanger: Bell & Gossett, Model A180B-20, S/N: 118075,
(2) 30 hp Motors, T643A, (2) Bell & Gossett Diffuser Model GF3, S/N: 194369 REF#2158a,
LOCATION: Omaha, NE, LOADING FEE (for domestic shipping): $1200
Lot: 82 : COOLING TOWER WATER, HEAT EXCHANGER SKID MODEL: n/a S/N:n/a, 1997
DESCRIPTION: TO INCLUDE: Heat Exchanger: Bell & Gossett, Model GPX678-249, S/N:
97C54178-01, (2) Bell & Gossett Suction Diffuser Model GG3, S/N: 160380, 175 psi @ 250 F,
(2) 40 hp Motors, R357B, wheeler Tank, S/N: 97426, 125 psi@650F REF#2159, LOCATION:
Omaha, NE, LOADING FEE (for domestic shipping): $1200
Picture
Item Name
Lot: 83 : COOLING TOWER WATER, HEAT EXCHANGER SKID MODEL: n/a S/N:n/a, 1998
DESCRIPTION: TO INCLUDE: Heat Exchanger: (missing plates) Bell & Gossett, Model GPX678,
S/N: 715608-01, Carlon Meter, Model MPC 5001, S/N: C075536, (2) 30 hp Motors:
4VL286TTDC4026AAS REF#2160, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $1200
Lot: 84 : MARLEY COOLING TOWER MODEL: AQUATORWER S/N:875856L-187(4872),
DESCRIPTION: BELT SIZE: 2B-144, OVERALL DIMS: 77X117X113 REF#TBD, LOCATION: ,
LOADING FEE (for domestic shipping): $400
Lot: 84a : MARLEY COOLING TOWER MODEL: AQUATORWER S/N:N/A, DESCRIPTION: BELT
SIZE: 2B-144, OVERALL DIMS: 77X117X113 REF#, LOCATION: , LOADING FEE (for domestic
shipping): $400
Lot: 85 : INGERSOLL-RAND 150 hp AIR COMPRESSOR, OIL FREE MODEL: SIERRA H150
S/N:TSO466U96121, 1996 DESCRIPTION: Water Cooled, Cap: 696 CFM, Rated Op Pres: 125
PSIG Max Discharge Pres: 128 PSIG, Nominal Drive Motor: 200 HP, Nominal Fan Motor: 1.1
HP, Total Pkg Amps: 206, 460 V, 3 ph, 60 hz, Control Voltage: 120 REF#8318, LOCATION:
Morrisville, PA , LOADING FEE (for domestic shipping): $300
Lot: 86 : INGERSOLL-RAND 150 hp AIR COMPRESSOR, OIL FREE MODEL: SIERRA H150
S/N:TSO465U96121, 1996 DESCRIPTION: Water Cooled, Cap: 696 CFM, Rated Op Pres: 125
PSIG Max Discharge Pres: 128 PSIG, Nominal Drive Motor: 200 HP, Nominal Fan Motor: 1.1
HP, Total Pkg Amps: 206, 460 V, 3 ph, 60 hz, Control Voltage: 120 REF#8319, LOCATION:
Morrisville, PA , LOADING FEE (for domestic shipping): $300
Picture
Item Name
Lot: 87 : GARDNER DENVER 150 hp AIR COMPRESSOR MODEL: ECQSOB S/N:M46086, 1989
DESCRIPTION: 460V, 1780 RPM, Hours: approx 1213 (heat exchanger not fully operational: not
all the fluids were drained prior to shipment and they froze- breaking off the end cap,
compressor itself ) REF#14425, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $300
Lot: 89 : CONAIR COOLING TOWER MODEL: DT-55I S/N:59309 , 37350 DESCRIPTION: 2 hp, 165
GPM, 230/460 v, 2 ph, 1200 RPMs REF#17000, LOCATION: Greeneville TN, LOADING FEE (for
domestic shipping): $250
Lot: 90 : RAPID GRANULATOR MODEL: 79MA S/N:n/a, DESCRIPTION: 2 HP, AUGER FED,
CHAMBER: 6x6 REF#2046, LOCATION: Omaha, NE, LOADING FEE (for domestic shipping): $50
Lot: 91 : CUMBERLAND, JOHN BROWN 20 hp GRANULATOR MODEL: 584 S/N:335000-93512,
DESCRIPTION: Opening Size – 14” x 20”, Sound Enclosure, 3 Knife Open Style Rotor, 460 Volts,
3 Phase, Blades not included REF#13050, LOCATION: Morrisville, PA , LOADING FEE (for
domestic shipping): $100
Lot: 92 : NELMOR 7.5 hp GRANULATOR MODEL: G1012M1 S/N:74 09 7996, DESCRIPTION: 10 X
12 OPENING REF#7222, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $50
Picture
Item Name
Lot: 93 : CONAIR 5 hp GRANULATOR MODEL: WOR-TEX 9262001 S/N:9108-1109,
DESCRIPTION: 5 HP, 10 X 10 OPENING, 480 V REF#7221, LOCATION: Morrisville, PA , LOADING
FEE (for domestic shipping): $50
Lot: 94 : CONAIR 10 hp GRANULATOR MODEL: WOR-TEX 9263001 S/N:1412-1390,
DESCRIPTION: 10 HP, 12X 14 OPENING REF#7223, LOCATION: Morrisville, PA , LOADING FEE
(for domestic shipping): $50
Lot: 95 : NELMOR 15 hp GRANULATOR MODEL: 1220RG11 S/N:881228400, DESCRIPTION: 15
HP, 28-230/460V, 3 PH, 20" X 12" OPENING REF#10948, LOCATION: Morrisville, PA , LOADING
FEE (for domestic shipping): $50
Lot: 96 : RAPID GRANULATOR MODEL: 1012K S/N:1002951, 1994 DESCRIPTION: 120/240 V, 1
PH, 10 X 12 OPENING REF#10954, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $50
Lot: 97 : RAPID GRANULATOR MODEL: 1012K S/N:1002638, 1993 DESCRIPTION: 120/240 V, 1
PH, 10 X 12 OPENING REF#10956, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $50
Picture
Item Name
Lot: 98 : NELMOR 60 hp GRANULATOR SYSTEM MODEL: G2024MP S/N:11618, DESCRIPTION:
460 volts - 20" x 24" - 3 blades closed rotor, Slant Knife, Overhead Feed Hopper, Motor Drive
Gear Box Drive Feeder Screw, Drive Controls & Conveyor, 48" X 48" X 36" Straight wall resin
surge bin w/ Whitlock VAC-5 Vacuum pump, Whitlock filter top mounted feed hopper and top
mounted motor & pump. REF#12650, LOCATION: Greeneville TN, LOADING FEE (for domestic
shipping): $600
Lot: 99 : NELMOR 60 hp GRANULATOR SYSTEM MODEL: G2024MP S/N:n/a, DESCRIPTION: 460
volts - 20" x 24" - 3 blades closed rotor, Slant Knife, Overhead Feed Hopper, Motor Drive Gear
Box Drive Feeder Screw, Drive Controls & Conveyor, 48" X 48" X 36" Straight wall resin surge
bin w/ Whitlock VAC-5 Vacuum pump, Whitlock filter top mounted feed hopper and top
mounted motor & pump. REF#12670, LOCATION: Greeneville TN, LOADING FEE (for domestic
shipping): $600
Lot: 100 : NELMOR GRANULATOR, AUGER MODEL: AG88M S/N:95 03 35588, DESCRIPTION:
.75 KW, 230/460 V REF#7987, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $50
Lot: 101 : PROCESS CONTROL CORP GRAVIMETRIC BLENDER MODEL: VB08DNMN
S/N:40189001 , DESCRIPTION: REF#2009, LOCATION: Omaha, NE, LOADING FEE (for domestic
shipping): $600
Lot: 102 : SWECO SCREENER W/ HOPPER & BLOWER MODEL: 9T2181004 S/N:EC,
DESCRIPTION: Vac-U-Max Vacuum and Dryer, Process Control Corp Bechpy Gravimetric
Blender w/ Process Control Corp. VB08DNLN03 Blower; S/N 1A30/B REF#2010, LOCATION:
Omaha, NE, LOADING FEE (for domestic shipping): $600
Picture
Item Name
Lot: 103 : STERLING, STERLCO HOT OIL HEATER MODEL: 6017L S/N:n/a, DESCRIPTION: Volts:
440, Watts Per Heater: 5000, Phase: 3, Cy: 60 REF#11667, LOCATION: Morrisville, PA ,
LOADING FEE (for domestic shipping): $200
Lot: 104 : NOVATEC CYCLONE MODEL: n/a S/N:n/a, DESCRIPTION: REF#7998, LOCATION:
Morrisville, PA , LOADING FEE (for domestic shipping): $50
Lot: 105 : MOTAN CYCLONE MODEL: n/a S/N:n/a, DESCRIPTION: REF#14827, LOCATION:
Morrisville, PA , LOADING FEE (for domestic shipping): $50
Lot: 106 : DRI-AIR HOPPER DRYER MODEL: ARID-X 25 PD S/N:D10681, DESCRIPTION: 460
VOLTS, 3 PHASE, 15AMP, HOPPER MODEL NUMBER - RH30, 30 LB CAPACITY REF#12231,
LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $50
Lot: 107 : DRI-AIR HOPPER DRYER MODEL: APD-2 S/N:D11102, DESCRIPTION: 460/3/15A,
HOPPER MODEL: RH60, 60 LB CAPACITY REF#12233, LOCATION: Morrisville, PA , LOADING FEE
(for domestic shipping): $50
Picture
Item Name
Lot: 108 : SPENCER 40 hp BLOWER S/N:310475, DESCRIPTION: CAT# 36103c4, 40 HP, 3500
RPM, 1440 SCFM, 5.5 VAC UNICHES Hg REF#8525, LOCATION: , LOADING FEE (for domestic
shipping): $150
Lot: 109 : IBN HOT RUNNER MODEL: 726 S/N:2919-5, DESCRIPTION: 16 MODULES, INPUT 480
V, 3 PH, OUTPUT 240 V, 15 KVA REF#7336, LOCATION: Morrisville, PA , LOADING FEE (for
domestic shipping): $50
Lot: 110 : CONTINENTAL HYDRAULIC HYDRAULIC CORE PULLER MODEL: R20-77-943 S/N:n/a,
DESCRIPTION: 3 HP, 240/460 V, 3 PH, 20 GAL REF#14985, LOCATION: Morrisville, PA ,
LOADING FEE (for domestic shipping): $50
Lot: 111 : CONTINENTAL HYDRAULIC HYDRAULIC CORE PULLER MODEL: n/a S/N:n/a,
DESCRIPTION: 3 PH, 208-230/460 V REF#14987, LOCATION: Morrisville, PA , LOADING FEE (for
domestic shipping): $50
Lot: 112 : SPENCER 100 hp BLOWER MODEL: M36103C4 S/N:316959 , DESCRIPTION: 230/460
V REF#8521, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $100
Picture
Item Name
Lot: 113 : NOVATEC MATERIAL DRYING SYSTEM MODEL: MD 50 S/N:n/a, DESCRIPTION: 208
VOLT, 30 HP, 60 HZ, 112KVA REF#12075, LOCATION: Morrisville, PA , LOADING FEE (for
domestic shipping): $100
Lot: 114 : SPENCER 100 hp BLOWER MODEL: 42203B1 S/N:316959, DESCRIPTION: 100 HP,
230/460 V, 3 PH REF#8523, LOCATION: , LOADING FEE (for domestic shipping): $150
Lot: 115 : IMS MOLECULAR SIEVE DESICCANT MODEL: 127920 S/N:n/a, DESCRIPTION: 1/8"
SIZE 4X8 MESH, GRADE 4 REF#14824, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $25
Lot: 116 : KENT PAD PRINTER MODEL: PP-150E S/N:C150-12-47, DESCRIPTION: REF#14610,
LOCATION: Greeneville TN, LOADING FEE (for domestic shipping): $150
Lot: 117 : REUSCH PAD PRINTER MODEL: SP/8110 S/N:N/A, DESCRIPTION: REF#14609,
LOCATION: Greeneville TN, LOADING FEE (for domestic shipping): $150
Picture
Item Name
Lot: 118 : REUSCH PAD PRINTER MODEL: SP/8110 S/N:970760, DESCRIPTION: REF#14611,
LOCATION: Greeneville TN, LOADING FEE (for domestic shipping): $150
Lot: 119 : TRANS TECH PAD PRINTER, DUAL COLOR MODEL: DUOSEAL 90 S/N:TPT8000024190,
DESCRIPTION: REF#11745, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping):
$200
Lot: 120 : UNITED SILICONE PAD PRINTERS W/ ROTARY TABLE MODEL: UP505N S/N:SPC
099523S, SPC 099524S, DESCRIPTION: 220 V, 1 ph, approx 60" dia table REF#14444-14446,
LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $600
Lot: 123 : SWECO SCREENER & DRYING SYSTEM MODEL: 75300555 S/N:702903-19998,
DESCRIPTION: Plastics Pulverizer; with Vac-U-Max Vacuum REF#2007, LOCATION: Omaha, NE,
LOADING FEE (for domestic shipping): $300
Lot: 124 : SPENCER 100 hp BLOWER MODEL: C61614 S/N:500385, DESCRIPTION: 230/460 V
REF#8524, LOCATION: , LOADING FEE (for domestic shipping): $150
Picture
Item Name
Lot: 125 : YORK CHILLER MODEL: YCWJ45EE-17PA S/N:SBEM-896650, DESCRIPTION: Ref: R22,
300 PSIG, 200 V, 3 ph, 60 Hz, Indoor Use, Options: Control Transformer, Vibration Isolators,
Flow Switch, Power Disconnect, Design Conditions GPM:Evap: 300, EWT 55.3, LWT 45.0; Cond:
375, EWT 85.0, LWT 95.3 REF#7931, LOCATION: , LOADING FEE (for domestic shipping): $150
Lot: 126 : LOGIC DEVICES TEMP CONTROLLER MODEL: VT-140 S/N:00149, DESCRIPTION: 480 V
REF#8790, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $50
Lot: 127 : MOKON TEMPERATURE CONTROLLER MODEL: GP2708-0-01 S/N:N/A, DESCRIPTION:
215-240 V, 3 ph, heater 8kw REF#8847, LOCATION: Morrisville, PA , LOADING FEE (for
domestic shipping): $50
Lot: 128 : MOKON TEMPERATURE CONTROLLER MODEL: GP2708-0-01 S/N:16939,
DESCRIPTION: 240 V, 3 PH, 1 HP REF#8848, LOCATION: Morrisville, PA , LOADING FEE (for
domestic shipping): $50
Lot: 129 : BUDZAR WORLD ALLIANCE TEMPERATURE CONTROLLER MODEL: BWA-1WT-9-1.50DS-460 S/N:200411-8902-3, DESCRIPTION: 460 V, 1.5 HP REF#8840, LOCATION: Morrisville, PA
, LOADING FEE (for domestic shipping): $50
Picture
Item Name
Lot: 130 : STERL TRONICS TEMPERATURE CONTROLLER MODEL: G9310-EXC S/N:97B5733,
DESCRIPTION: 460 V, 3 PH REF#8835, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $50
Lot: 131 : STERLCO TEMPERATURE CONTROLLER MODEL: G9310-EXC S/N:97B5732,
DESCRIPTION: 460 V REF#8704, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $50
Lot: 132 : CONAIR TEMPRO TEMPERATURE CONTROLLER MODEL: TCI-CC S/N:93G172,
DESCRIPTION: 460 V REF#8702, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $50
Lot: 135 : CONAIR TEMPRO TEMPERATURE CONTROLLER MODEL: TCI-DI S/N:91E054,
DESCRIPTION: 460 V REF#8845, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $50
Lot: 137 : CONTROL KING HOT RUNNER MODEL: n/a S/N:n/a, DESCRIPTION: w/ 32 Control
King TCJ Controllers / Modules REF#14983, LOCATION: Morrisville, PA , LOADING FEE (for
domestic shipping): $100
Picture
Item Name
Lot: 139 : STERLING TEMPERATURE CONTROLLER MODEL: M-F6026HX S/N:44096,
DESCRIPTION: 96 AMP WATTS PER HEATER 36K REF#11469, LOCATION: Morrisville, PA ,
LOADING FEE (for domestic shipping): $100
Lot: 140 : BRANSON ULTRASONIC WELDER MODEL: 187P S/N:KT50035, DESCRIPTION:
200/245 VAC REF#14828, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping):
$100
Lot: 141 : BRANSON ULTRASONIC WELDER MODEL: 187P S/N:KT50388, DESCRIPTION:
200/245 VAC REF#14829, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping):
$100
Lot: 142 : BRANSON ULTRASONIC WELDER MODEL: 187P S/N:KT40065, DESCRIPTION:
200/245 VAC REF#14830, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping):
$100
Lot: 143 : PROCESS CONTROL GRAVIMETRIC BLENDER MODEL: XBLJGGD01 S/N:50324001,
35107 DESCRIPTION: 120 V, 4 CHAMBERS REF#TBD, LOCATION: , LOADING FEE (for domestic
shipping): $50
Picture
Item Name
Lot: 144 : VACUUM HOPPERS, LOT OF 3 3 IMS HOPPERS, MAGUIRE COLOR PULSES
CONTROLLER MODEL: n/a S/N:n/a, DESCRIPTION: REF#14984, LOCATION: Morrisville, PA ,
LOADING FEE (for domestic shipping): $50
Lot: 145 : LABOTEK VACUUM LOADER MODEL: PGT61 S/N:1800802, DESCRIPTION: 1.37KW,
440 V, CON-EVATOR REF#14666, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $25
Lot: 146 : LABOTEK VACUUM LOADER MODEL: n/a S/N:N/A, DESCRIPTION: 31" DIA
REF#14879, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $25
Lot: 147 : LABOTEK VACUUM LOADER MODEL: PGT61 S/N:1801762, DESCRIPTION: 220 3 PH,
60 HZ, 1.37 KW REF#14880, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping):
$25
Lot: 148 : LABOTEK VACUUM LOADER MODEL: PGT61 S/N:1800798, DESCRIPTION: 440 V, 60
HZ 1.37 KW REF#14881, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $25
Picture
Item Name
Lot: 149 : LABOTEK VACUUM LOADER MODEL: PGT61 S/N:1801052, DESCRIPTION: 440 V, 1.37
KW, NO CONTROLLER REF#14882, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $25
Lot: 150 : LABOTEK VACUUM LOADER MODEL: PGT61 S/N:1801760, DESCRIPTION: 1.37KW,
440 V, CON-EVATOR, NO CONTROLLER REF#14883, LOCATION: Morrisville, PA , LOADING FEE
(for domestic shipping): $25
Lot: 151 : LABOTEK VACUUM LOADER MODEL: PGT61 S/N:1800726, DESCRIPTION: W/
CONTROLLER REF#14884, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping):
$25
Lot: 152 : LABOTEK VACUUM LOADER MODEL: PGT61 S/N:1801764, DESCRIPTION: 1.37KW,
440 V, CON-EVATOR, W/ CONTROLLER REF#14885, LOCATION: Morrisville, PA , LOADING FEE
(for domestic shipping): $25
Lot: 153 : LABOTEK VACUUM LOADER MODEL: PGT61 S/N:9ST21802392, DESCRIPTION: 26"
DIA,NO CONTROLLER, 440 V REF#14886, LOCATION: Morrisville, PA , LOADING FEE (for
domestic shipping): $25
Picture
Item Name
Lot: 154 : NOVATEC BLOWER W/ CYCLONE MODEL: VPU-5 S/N:12-810-1679, DESCRIPTION:
230 V, 5 KV, 3 PH, 60 HZ, 5 HP REF#10939, LOCATION: Morrisville, PA , LOADING FEE (for
domestic shipping): $100
Lot: 155 : NOVATEC BLOWER W/ CYCLONE MODEL: VPU-5 S/N:N/A, 2001 DESCRIPTION: 230
V, 5 KV, 3 PH, 60 HZ, 5 HP REF#10941, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $100
Lot: 156 : NOVATEC BLOWER W/ CYCLONE MODEL: VPU-10 S/N:8-7143-1963, 2001
DESCRIPTION: 10/17/01, 460 V, 3 PH, 60 H, 10.13 KVA, 13 AMPS REF#10943, LOCATION:
Morrisville, PA , LOADING FEE (for domestic shipping): $100
Lot: 157 : AIRTECH VACUUM PUMP MODEL: L-230-G1 S/N:N03082751, DESCRIPTION: 7.5 HP,
208-230/460 V, 155 CFM REF#14500, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $100
Lot: 158 : CUMBERLAND 7.5 hp GRANULATOR MODEL: 10X12 S/N:25086-6620, DESCRIPTION:
208-220/440 V, 7 1/2 HP W/ ERIEZ MAGNETIC SEPARATOR REF#10295, LOCATION: , LOADING
FEE (for domestic shipping): $100
Picture
Item Name
Lot: 159 : CINCINNATI FAN BLOWER MODEL: HDBI-240 S/N:801949, DESCRIPTION: Blower,
15hp, 208-230/460v, 1760rpm, Frame 254T, 27 Inch Round Inlet, 16 Inch x 27 Inch Outlet,
With (2) Pieces Of Galvanized Ducting And Flanges REF#14726, LOCATION: Morrisville, PA ,
LOADING FEE (for domestic shipping): $100
Lot: 160 : DHOWA DENKI BLOWER MODEL: n/a S/N:151266501, DESCRIPTION: All Stainless
Steel Electric Blower, Stand Mounted, 200-220v, 3-Phase, 60hz, 2.2 Kw REF#14728,
LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $100
Lot: 161 : SHOWA DENKI BLOWER MODEL: n/a S/N:151264501, DESCRIPTION: All Stainless
Steel Electric Blower, Stand Mounted, 200-220v, 3-Phase, 60hz, 3.7 Kw REF#14729,
LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $50
Lot: 162 : SPENCER 40 hp BLOWER MODEL: 36103C4 S/N:310474, DESCRIPTION: BALDOR
MOTOR, 40 HP MOTOR, 440 SCFM, 3500 RPM, 5.5 Vac, 230/460 V REF#8522, LOCATION:
Morrisville, PA , LOADING FEE (for domestic shipping): $150
Lot: 163 : FULLER 10 hp BLOWER MODEL: 3MVF S/N:239113, DESCRIPTION: FOREMOST
CONTROL, 230/460 V REF#14929, LOCATION: Morrisville, PA , LOADING FEE (for domestic
shipping): $50
Picture
Item Name
Lot: 164 : GARDNER DENVER, SUTORBILT 15 hp BLOWER MODEL: CAEMBPA S/N:S004450,
DESCRIPTION: 5850 MWP, 480 V REF#14926, LOCATION: Morrisville, PA , LOADING FEE (for
domestic shipping): $50
Lot: 166 : HOFFMAN BLOWER, CENTRIFUGAL MODEL: 38406A S/N:0880042, DESCRIPTION: 75
HP, 230/460V REF#14921, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping):
$200
Lot: 167 : HOFFMAN BLOWER, CENTRIFUGAL MODEL: 38406A S/N:1280082, DESCRIPTION: 75
HP, 230/460 V REF#14922, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping):
$200
Lot: 168 : DUROFLOW BLOWER, POSITIVE MODEL: GGDCADA S/N:S127683, 1976
DESCRIPTION: 15 HP, 208-230/460 V, 4000 MAX RPM REF#14924, LOCATION: Morrisville, PA ,
LOADING FEE (for domestic shipping): $100
Lot: 169 : DUROFLOW BLOWER, POSITIVE MODEL: 3006UT S/N:R000387, DESCRIPTION: 5 HP,
208-230/460 V REF#14925, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping):
$50
Picture
Item Name
Lot: 170 : THERMAL CARE CHILLER MODEL: PT3400 S/N:TK13462, DESCRIPTION: 480 V, TANK
ON TOP REF#10423, LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $1500
Lot: 172 : NOVATEC BLENDING SYSTEM MODEL: NGBB5-3 S/N:12-810-0502, DESCRIPTION:
115V, 3 REF#552,C-54, LOCATION: , LOADING FEE (for domestic shipping): $200
Lot: 173 : KAMFLUX CONVEYOR MODEL: 702 S/N:8133, DESCRIPTION: 20 FPM, 115 V, 1/4HP,
12X48, ADJUSTABLE HEIGHT REF#14988, LOCATION: Morrisville, PA , LOADING FEE (for
domestic shipping): $50
Lot: 174 : SAFELINE CONVEYOR MODEL: n/a S/N:n/a, DESCRIPTION: 8" WIDE REF#14492,
LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $50
Lot: 175 : WHITLOCK CYCLONE HOPPER MODEL: n/a S/N:n/a, DESCRIPTION: REF#14878,
LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $50
Picture
Item Name
Lot: 176 : NOVATEC DRYER SYSTEM MODEL: CDM-120 S/N:10A-1231-0268, 36245
DESCRIPTION: 4 NOVATEC HOPPERS 100 LB CAPCITY EACH MODEL HB, 2 RECEIVING TANKS,
PUMP, MICROPROCESSOR CONTROLS, 208 VOLT, 3 PHASE, 60 HZ, 33.2KV REF#12598,
LOCATION: Morrisville, PA , LOADING FEE (for domestic shipping): $300
Lot: 177 : DAYTON BLOWERS, LOT OF 2 MODEL: 4C108 S/N:N/A, DESCRIPTION: (1) WHEEL
DIAMETER 10" 9/16", 208 220/440 VOLTS 1 HP, (1) .75 HP REF#11527, LOCATION: , LOADING
FEE (for domestic shipping): $50
Lot: 178 : DRI-AIR MATERIAL DRYING SYSTEM MODEL: ARID-X 35 S/N:D10760, DESCRIPTION:
INCOMPLETE, 460 V, 3 PH REF#311, LOCATION: , LOADING FEE (for domestic shipping): $50
Lot: 179 : Sterlco Dual Temperature ControllerSterlco Dual Temperature Controller Model: M29422-CX - Year: 1994 Type: Water - Electrical: 460V / 50-60 Hz / 3PH Pumps: 2 - GMP: 30 @ 26
PSI - Max PSI: 75 Temperature: 250F - Controller: Series 9000 M2 Features: Direct Injection;
Automatic Vent REF# 22511 LOCATION: Omaha, NE LOADING FEE (for domestic shipping): $50
Lot: 180 : Sterlco Dual Temperature ControllerSterlco Dual Temperature Controller Model: M29422-CX - Year: 1994 Type: Water - Electrical: 460V / 50-60 Hz / 3PH Pumps: 2 - GMP: 30 @ 26
PSI - Max PSI: 75 Temperature: 250F - Controller: Series 9000 M2 Features: Direct Injection;
Automatic Vent REF# 22512 LOCATION: Omaha, NE LOADING FEE (for domestic shipping): $50
Picture
Item Name
Lot: 181 : Sterlco Dual Temperature ControllerSterlco Dual Temperature Controller Model: M29422-CX - Year: 1994 Type: Water - Electrical: 460V / 50-60 Hz / 3PH Pumps: 2 - GMP: 30 @ 26
PSI - Max PSI: 75 Temperature: 250F - Controller: Series 9000 M2 Features: Direct Injection;
Automatic Vent REF# 22513 LOCATION: Omaha, NE LOADING FEE (for domestic shipping): $50
Lot: 182 : Sterlco Dual Temperature ControllerSterlco Dual Temperature Controller Model: M29422-CX - Year: 1994 Type: Water - Electrical: 460V / 50-60 Hz / 3PH Pumps: 2 - GMP: 30 @ 26
PSI - Max PSI: 75 Temperature: 250F - Controller: Series 9000 M2 Features: Direct Injection;
Automatic Vent REF# 22514 LOCATION: Omaha, NE LOADING FEE (for domestic shipping): $50
Lot: 183 : Sterlco Dual Temperature ControllerSterlco Dual Temperature Controller Model: M29422-CX - Year: 1994 Type: Water - Electrical: 460V / 50-60 Hz / 3PH Pumps: 2 - GMP: 30 @ 26
PSI - Max PSI: 75 Temperature: 250F - Controller: Series 9000 M2 Features: Direct Injection;
Automatic Vent REF# 22515 LOCATION: Omaha, NE LOADING FEE (for domestic shipping): $50
Lot: 184 : Sterlco Dual Temperature ControllerSterlco Dual Temperature Controller Model: M29422-CX - Year: 1994 Type: Water - Electrical: 460V / 50-60 Hz / 3PH Pumps: 2 - GMP: 30 @ 26
PSI - Max PSI: 75 Temperature: 250F - Controller: Series 9000 M2 Features: Direct Injection;
Automatic Vent REF# 22516 LOCATION: Omaha, NE LOADING FEE (for domestic shipping): $50
Lot: 185 : Sterlco Dual Temperature ControllerSterlco Dual Temperature Controller Model: M29422-CX - Year: 1994 Type: Water - Electrical: 460V / 50-60 Hz / 3PH Pumps: 2 - GMP: 30 @ 26
PSI - Max PSI: 75 Temperature: 250F - Controller: Series 9000 M2 Features: Direct Injection;
Automatic Vent REF# 22517 LOCATION: Omaha, NE LOADING FEE (for domestic shipping): $50
Picture
Item Name
Lot: 186 : Sterlco Dual Temperature ControllerSterlco Dual Temperature Controller Model: M29422-CX - Year: 1994 Type: Water - Electrical: 460V / 50-60 Hz / 3PH Pumps: 2 - GMP: 30 @ 26
PSI - Max PSI: 75 Temperature: 250F - Controller: Series 9000 M2 Features: Direct Injection;
Automatic Vent REF# 22518 LOCATION: Omaha, NE LOADING FEE (for domestic shipping): $50
Lot: 187 : Sterlco Dual Temperature ControllerSterlco Dual Temperature Controller Model: M29422-CX - Year: 1994 Type: Water - Electrical: 460V / 50-60 Hz / 3PH Pumps: 2 - GMP: 30 @ 26
PSI - Max PSI: 75 Temperature: 250F - Controller: Series 9000 M2 Features: Direct Injection;
Automatic Vent REF# 22519 LOCATION: Omaha, NE LOADING FEE (for domestic shipping): $50
Lot: 189 : Sterlco Dual Temperature ControllerSterlco Dual Temperature Controller Model: M29422-CX - Year: 1994 Type: Water - Electrical: 460V / 50-60 Hz / 3PH Pumps: 2 - GMP: 30 @ 26
PSI - Max PSI: 75 Temperature: 250F - Controller: Series 9000 M2 Features: Direct Injection;
Automatic Vent REF# 22523 LOCATION: Omaha, NE LOADING FEE (for domestic shipping): $50
Lot: 190 : Sterlco Dual Temperature ControllerSterlco Dual Temperature Controller Model: M29422-CX - Year: 1994 Type: Water - Electrical: 460V / 50-60 Hz / 3PH Pumps: 2 - GMP: 30 @ 26
PSI - Max PSI: 75 Temperature: 250F - Controller: Series 9000 M2 Features: Direct Injection;
Automatic Vent REF# 22524 LOCATION: Omaha, NE LOADING FEE (for domestic shipping): $50
Lot: 191 : Sterlco Dual Temperature ControllerSterlco Dual Temperature Controller Model: M29422-CX - Year: 1994 Type: Water - Electrical: 460V / 50-60 Hz / 3PH Pumps: 2 - GMP: 30 @ 26
PSI - Max PSI: 75 Temperature: 250F - Controller: Series 9000 M2 Features: Direct Injection;
Automatic Vent REF# 22525 LOCATION: Omaha, NE LOADING FEE (for domestic shipping): $50
Picture
Item Name
Lot: 192 : Sterlco Single Temperature ControllerSterlco Single Temperature Controller Model:
M2A: - Year: 1994 Type: Water - Electrical: 460V / 50-60 Hz / 3PH Pumps: 2 - GMP: 30 @ 26
PSI - Max PSI: 75 Temperature: 250F - Controller: Series 9000 M2 Features: Direct Injection;
Automatic Vent REF# 22521 LOCATION: Omaha, NE LOADING FEE (for domestic shipping): $25
Lot: 195 : Rapid Granulator Model: 69SRRapid Granulator Model: 69SR Size Opening: 6" x 9";
HP: 5; Volts: 460; KW: 1.5; Rotor: Staggered; Knives: 9 Rotating Blades: 2 Fixed - Features: Top
Load; Low Rotor Speed / Beside or Beneath the press REF# 22508 LOCATION: Omaha, NE
LOADING FEE (for domestic shipping): $75
Lot: 196 : Rapid Granulator Model: 69SRRapid Granulator Model: 69SR Size Opening: 6" x 9";
HP: 5; Volts: 460; KW: 1.5; Rotor: Staggered; Knives: 9 Rotating Blades: 2 Fixed - Features: Top
Load; Low Rotor Speed / Beside or Beneath the press REF# 22509 LOCATION: Omaha, NE
LOADING FEE (for domestic shipping): $75
Lot: 197 : Rapid Granulator Model: 69SRRapid Granulator Model: 69SR Size Opening: 6" x 9";
HP: 5; Volts: 460; KW: 1.5; Rotor: Staggered; Knives: 9 Rotating Blades: 2 Fixed - Features: Top
Load; Low Rotor Speed / Beside or Beneath the press REF# 22510 LOCATION: Omaha, NE
LOADING FEE (for domestic shipping): $75
Lot: 198 : Sumitomo 50 Ton Injection Molding Machine50 Ton, .95 Oz. Sumitomo Injection
Molding Machine; Model:SH50M Platen Size: 18.00" x 18.00"; Tie Bars: 13.00" x 13.00" Max
Daylight: 17.32"; Minimum Mold Space: 6.30" Ejector Stroke: 2.76"; Dims: 146"L x 37"W x
65"H Weight: 4,900 Lbs. Equipped w/ AEC Robot; Blender; .95 Oz. Injection Unit; Hydraulic
Knockouts; Core Pull REF# 22533 LOCATION: Omaha, NE LOADING FEE (for domestic
shipping): $125