AREA LIGHTING
HYPAK SERIES
HYPAK - HP3
HYPAK - HP4
Hypak Area Lights - HP3 and HP4
Hypak - a series of high performance building
mounted luminaires providing maximum versatility.
Innovative optical design, low profile fixtures, and practical mechanical layout make Hypak a complete lighting system easy to specify,
install, and maintain. Hypak’s low profile design and soft light are
ideal for area lighting applications where control and visual comfort
are important.
1
The HP3 Series – a versatile complement to the larger
HP4 luminaires.
2
These units, offering eight
unique light distributions, may
be wall or ceiling mounted. Low
level uses include illumination
of stairways, pedestrian areas,
entrances, ramps, and driveways.
At higher levels, the HP3 is used
to illuminate industrial work
spaces, aisles, and garages.
The HP3 Series is a compact,
low glare, high performance
luminaire for HID lamps to 150
Watts. Any one of eight light
distributions within a single
housing are created by combining one of two lenses and a
choice of three reflectors. Symmetrical and asymmetrical distributions are
available. The reflector and lens design provide excellent cutoff glare control
and photometric performance. The result is visual comfort and performance
found with a lower number of fixtures.
3
SPECIFICATIONS - HP3
WALL MOUNT
Compact, one-piece lens door
made of tough molded Lexan®
polycarbonate.
Fresnel linear spread lens
for uniform light distribution.
Durable stainless steel
fasteners are easily removed
for fixture access.
CEILING MOUNT
Fresnel spread lens for uniform
light distribution.
Durable stainless steel fasteners
are easily removed for fixture
access.
High-performance reflectors provide four
different wall mount distributions. Extruded
aluminum reflectors are Alzak® treated for
long-term, uniform lighting.
Long lasting silicon gaskets
completely seal the fixture
to protect against water and
bugs.
Quick disconnects included
for easy reflector installation
or removal.
Pulse rated porcelain sockets
for medium base (or E-27) HID
lamps to 150 Watts.
High power factor ballasts mounted to housing for maximum heat
dissipation, long life, and reliable
lamp starting.
High-performance reflectors provide
three different ceiling mount
distributions. Hydroform aluminum
reflectors are Alzak® treated for longterm, uniform lighting.
Long lasting Silicon gaskets
completely seal the fixture to
protect against water and bugs.
Pulse-rated porcelain sockets
for medium base (or E-27) HID
lamps to 150 Watts.
4
Shallow and compact, durable,
heat-dissipating one-piece die
cast aluminum housing.
High power factor ballasts mounted to housing for maximum heat
dissipation, long life, and reliable
lamp starting.
Quick disconnects included
for easy reflector installation /
removal.
Durable, heat-dissipating
one-piece die cast aluminum
housing is shallow and compact.
Optional direct conduit entry
for easy, straight-through
wiring.
Easy surface or recessed
installation. Integrally cast
knockouts provided for rear
4-0 box entry or independent
mounting.
Housing will be pre-shipped
with RDE & RSB mountings.
Optional direct conduit entry for
easy, straight-through wiring.
Easy surface or recessed
installation. Integrally cast
knockouts provided for rear
4-0 box entry or independent
mounting.
U.L. LISTED
FOR WET LOCATIONS
C.S.A. LISTED
APPLICATION GUIDELINES - HP3
WALL MOUNT
HORIZONTAL ILLUMINANCE RECOMMENDATIONS IN FOOTCANDLES (FC)
LEVEL 1
MEDIUM LIGHT LEVEL
Public access area with some protection,
unfenced. Moderate light required for
visibility and security.
Recommended light level - 0.5 FC MIN
LEVEL 2
HIGH LIGHT LEVEL
High public access area with no protection.
Lighting required for good visibility and
security.
Recommended light level - 1 FC MIN
LEVEL 3
VERY HIGH LIGHT LEVEL
Where maximum light level is required for
highest visibility and security and/or
accenting for sales impact.
Recommended light level - 5 FC MIN
HFW: HIGH FORWARD WALL DISTRIBUTION
IES FILE: ITL33160
100M HFW @ 10’ (0.5 FC MIN)
33’
100M HFW @ 10’ (1 FC MIN)
100M HFW @ 10’ (5 FC MIN)
30’
18’
LHW: LOW HORIZONTAL WALL DISTRIBUTION
IES FILE: ITL33869
100M LHW @ 3’ (0.5 FC MIN)
32’
*
*
*
100M LHW @ 3’ (1 FC MIN)
100M LHW @ 3’ (5 FC MIN)
27’
HORIZONTAL FC LEVELS ARE BASED ON 0% WALL REFLECTANCE.
PLEASE VISIT WWW.HYDREL.COM TO DOWNLOAD DETAILED PERFORMANCE DATA IN IES FORMAT.
RECOMMENDED LIGHT LEVELS FOR USE AS APPLICATION GUIDELINES ONLY,
ACTUAL APPLICATIONS MAY REQUIRE DIFFERENT LEVELS.
17’
5
APPLICATION GUIDELINES - HP3
WALL MOUNT
LFW: LOW FORWARD WALL DISTRIBUTION
IES FILE: ITL33163
100M LFW @ 3’ (0.5 FC MIN)
20’
100M LFW @ 3’ (1 FC MIN)
100M LFW @ 3’ (5 FC MIN)
12’
17’
LLW: LOW LEFT WALL DISTRIBUTION
LRW: LOW RIGHT WALL DISTRIBUTION
IES FILE: ITL33870
100M LLW/LRW @ 2’ (0.5 FC MIN)
*
*
*
6
100M LLW/LRW @ 2’ (1 FC MIN)
100M LLW/LRW @ 2’ (5 FC MIN)
HORIZONTAL FC LEVELS ARE BASED ON 0% WALL REFLECTANCE.
PLEASE VISIT WWW.HYDREL.COM TO DOWNLOAD DETAILED PERFORMANCE DATA IN IES FORMAT.
RECOMMENDED LIGHT LEVELS FOR USE AS APPLICATION GUIDELINES ONLY,
ACTUAL APPLICATIONS MAY REQUIRE DIFFERENT LEVELS.
APPLICATION GUIDELINES - HP3
CEILING MOUNT
HSC: HIGH SYMMETRICAL DISTRIBUTION
IES FILE: ITL33168
100M HSC @ 10’ (0.5 FC MIN)
100M HSC @ 10’ (1 FC MIN)
100M HSC @ 10’ (5 FC MIN)
21’
24’
12’
HNC: HIGH NARROW DISTRIBUTION
IES FILE: ITL33171
100M HNC @ 10’ (0.5 FC MIN)
22’
100M HNC @ 10’ (1 FC MIN)
100M HNC @ 10’ (5 FC MIN)
18’
9’
HAC: HIGH ASYMMETRICAL DISTRIBUTION
IES FILE: ITL33172
100M HAC @ 10’ (0.5 FC MIN)
22’
*
*
100M HAC @ 10’ (1 FC MIN)
100M HAC @ 10’ (5 FC MIN)
18’
PLEASE VISIT WWW.HYDREL.COM TO DOWNLOAD DETAILED PERFORMANCE DATA IN IES FORMAT.
RECOMMENDED LIGHT LEVELS FOR USE AS APPLICATION GUIDELINES ONLY,
ACTUAL APPLICATIONS MAY REQUIRE DIFFERENT LEVELS.
10’
7
MOUNTINGS - HP3
SNB
SNB - FRONT
SNB - SIDE
SNB - BACK
Two (2) 1/4” mounting holes for wall
anchor bolts (bolts by others)
SURFACE
Surface mounting over
recessed junction box
(by others). Knockout
mounting holes
provided.
12 3/8”
2 1/4”
7”
11 3/8”
Recessed
4-0 box
(by others)
Cast knockouts for
4-0 box mounting
SDE/SSB - FRONT
SDE
SURFACE, DIRECT ENTRY
Applications for direct
conduit entry. Two (2)
1/2” NPS openings
standard.
SSB
12 3/8”
9”
6 1/4”
SDE/SSB - BACK
Two (2) 1/4” mounting holes for wall
fasteners (fasteners by others)
1”
2 1/4”
SDE: Two (2) 1/2”
NPS side direct
conduit entries
11 3/8”
7”
12 7/8”
SSB: Two (2) 3/4”
NPS side direct
conduit entries in
splice box
SURFACE WITH SPLICE BOX
Cast aluminum splice
box included. 3/4” NPS
openings standard.
5 7/8”
RDE
RDE/RSB - FRONT
RDE/RSB - SIDE
12 3/8”
8” Min.
RECESSED, DIRECT ENTRY
Applications for direct
conduit connections.
Two (2) 1/2” NPS openings standard.
RSB
SDE/SSB - SIDE
RDE/RSB - BACK
Housing is held to front form with #10-24
fasteners threaded into housing.
(fasteners by others)
RDE: Two (2) 1/2”
NPS side direct
conduit entries
11 3/8”
10 5/8”
12 7/8”
RSB: Two (2) 3/4”
NPS side direct
conduit entries in
splice box
RECESSED WITH SPLICE BOX
Cast aluminum splice
box included. 3/4” NPS
side or bottom openings
available.
5 11/16”
6 3/16”
11 5/8”
BMS - FRONT
BMS
BASE, SINGLE
Base mounting over recessed junction box (by
others). Mounting plate
provided.
12 3/8”
BMS - SIDE
BMT - TANDEM
9“
18”
6 1/4”
11 3/8”
BMT
BASE, TANDEM
Twin base mounting
over recessed junction
box (by others).
8
Four (4) set screws
secure fixture to
supplied mounting
12 7/8”
5 5/8”
Recessed
4-0 box (by others)
12 7/8”
5 5/8”
MOUNTINGS - HP3
SPM - FRONT
SPM
PENDANT, SINGLE
Top pendant mounting
below recessed junction
box (by others). Set
screws secure fixture to
supplied mounting.
TPM
Recessed
4-0 box
(by others)
Four (4) set screws
secure fixture to
supplied mounting
PMS - FRONT
PMT - TANDEM
9”
18”
6 1/4”
11 3/8”
14 3/4”
15 1/2”
3 3/8”
4 1/8”
PFD/PFS - FRONT
PLASTER FRAME FOR DIRECT
PFD/PFS - SIDE
PFD/PFS - BACK
5/8”
ENTRY
12 3/8”
Eight (8) 1/4” dia. holes for
attaching to dry wall plaster frame
PFD: Two 1/2” NPS
side direct conduit entries
11 3/4”
11 3/8”
PFS
PFS: Cast knockouts
for 4-0 box mounting
(4-0 box by others)
PLASTER FRAME WITH SPLICE
BOX
Recessed in dry walls
or ceilings. Knockouts
available for Junction
box (by others).
SURFACE (CEILING)
Mountings are Standard in Ceiling mounted
versions when ordering HSC, HNC and HAC
distributions.
18”
PMS - SIDE
12 3/8”
PFD
SNB
SDE
SSB
12 7/8”
6 1/4”
9”
12 3/8”
PMT
Applications for direct
conduit connections.
Recessed in dry walls
or ceilings. Two (2) 1/2”
NPS openings standard.
5 5/8”
11 3/8”
PMS
POLE, TANDEM
Twin Pole mounting
on 2 3/8” dia. x 4” long
tenon (by others) slip
fitter secures with
supplied fastener bolts.
TPM - TANDEM
5 5/8”
12 7/8”
PENDANT, TANDEM
Twin pendant mounting
below recessed junction
box (by others). Set
screws secure fixture to
supplied mounting.
POLE, SINGLE
Pole mounting on 2 3/8”
dia. x 4” long tenon (by
others) slip fitter secures
with supplied fastener
bolts.
SPM - SIDE
12 3/4”
Cast knockouts for
4-0 box mounting
SNB/SDE/SSB - BOTTOM
SNB - SIDE
Recessed 4-0 Box
(by others)
12 3/8”
6 1/4”
9”
11 3/8”
SDE/SSB - SIDE
Two 1/2” NPS side
direct conduit entries
6 1/4”
9”
1 11/16”
RSB: Two (2) 3/4”
NPS side direct
conduit entries in
splice box
9
The HP4 Series – high performance building mounted
luminaires provide maximum versatility.
10
Innovative optical design, low
profile fixtures and practical
mechanical layout make HP4
lighting systems easy to specify,
install, and maintain. HP4 low
profile design and soft light are
ideal for area lighting application where control and visual
comfort are important. Common
applications include building
security, pedestrian areas,
industrial work areas, garage,
and parking areas.
This wall mounted luminaire provides uniform light for large areas with
excellent glare control to minimize intrusion.
The Hypak HP4 is a versatile high performance sharp vertical cutoff luminaire capable of meeting all the needs of high level area lighting. The unit
can be surface-mounted, recessed, pole, post, pendant, and base mounted
to allow for maximum versatility. To insure long maintenance-free service,
Hydrel uses a single die cast aluminum housing and a vandal resistant polycarbonate projecting lens. All hardware is stainless steel. Silicone gaskets
assure weather and bug tight seals.
11
SPECIFICATIONS - HP4
WALL MOUNT
One piece Lexan® hinged
lens door is impact and
vandal resistant. Stainless
steel hinges provide easy
door removal for fixture
access.
Fresnel linear spread
lens of U.V. stabilized
clear polycarbonate
lens.
Long lasting silicone gaskets provide protection
against water and bugs.
Durable stainless
steel fasteners
are easily removed for fixture
access.
High performance reflector is
adjustable through sharp cutoff
range of 70° to 85°. Unique
three piece extruded aluminum
reflector construction. Alzak
treated aluminum for long term
optical performance.
Internal aiming scale
is used for easy,
accurate cut-off
adjustment.
Pulse-rated porcelain
lamp sockets accept
HID lamps to 250
Watts.
Housing is durable, heat
dissipating one piece
die-cast aluminum.
Quick disconnects
are included for easy
removal or installation of the reflector
assembly.
Integral cast knockouts
provided for rear 4-0 box
entry or independent
mounting.
High power factor
ballasts are mounted
directly to the housing for maximum
heat dissipation,
long life and reliable
lamp starting.
Heavy-duty polyester powder coat
finish for long-term
fixture performance.
Housing will be
pre-shipped with
RSB mounting.
Door rod holds door in open position
for easier lamp replacement
and maintenance.
Easy access, quarter turn fasteners
quickly releases reflector assembly.
Reflector assembly is counterbalanced to provide easy access to ballast wiring area for installation and maintenance.
12
U.L. LISTED
FOR WET LOCATIONS
C.S.A. LISTED
APPLICATION GUIDELINES - HP4
WALL MOUNT
HORIZONTAL ILLUMINANCE RECOMMENDATIONS IN FOOTCANDLES (FC)
LEVEL 1
MEDIUM LIGHT LEVEL
Public access area with some protection,
unfenced. Moderate light required for
visibility and security.
Recommended light level - 0.5 FC MIN
LEVEL 2
HIGH LIGHT LEVEL
High public access area with no protection.
Lighting required for good visibility and
security.
Recommended light level - 1 FC MIN
LEVEL 3
VERY HIGH LIGHT LEVEL
Where maximum light level is required for
highest visibility and security and/or
accenting for sales impact.
Recommended light level - 5 FC MIN
HP4 175M @ 70° REFLECTOR ANGLE
IES FILE: ITL31755
51’
44’
24’
44’
24’
45’
24’
HP4 175M @ 76° REFLECTOR ANGLE
IES FILE: ITL31756
51’
HP4 175M @ 85° REFLECTOR ANGLE
IES FILE: ITL31757
53’
*
*
*
HORIZONTAL FC LEVELS ARE BASED ON 0% WALL REFLECTANCE.
PLEASE VISIT WWW.HYDREL.COM TO DOWNLOAD DETAILED PERFORMANCE DATA IN IES FORMAT.
RECOMMENDED LIGHT LEVELS FOR USE AS APPLICATION GUIDELINES ONLY,
ACTUAL APPLICATIONS MAY REQUIRE DIFFERENT LEVELS.
13
MOUNTINGS - HP4
SNB - FRONT
SNB
SURFACE
Surface mounting over
recessed junction box
(by others). Knockout
mounting holes
provided.
16 3/8”
SNB - SIDE
SNB - BACK
Four (4) 1/4” mounting
holes for wall anchor bolts
(bolts by others)
11 3/8”
6 7/8”
12”
3 5/8”
15 5/8”
Recessed
4-0 box
(by others)
SSB - FRONT
SSB
SURFACE WITH SPLICE BOX
For applications where
conduit is run on
surface. Cast aluminum
splice box included.
3/4” NPS openings
standard.
16 3/8”
SSB - SIDE
11 3/8”
6 7/8”
Cast knockouts for
4-0 box mountings
SSB - BACK
Four (4) 1/4” mounting
holes for wall anchor bolts
(bolts by others)
12”
3 5/8”
15 5/8”
17 7/16”
5 7/8”
RSB - FRONT
RSB
RECESSED WITH SPLICE BOX
(Concrete Installation)
For applications where
unit needs to be
recessed in concrete.
Cast aluminum splice
box included. 3/4” NPS
openings standard.
Housing back box can
be pre-installed.
16 3/8”
Two (2) 3/4” NPS side
conduit entries in splice box.
RSB - SIDE
RSB - BACK
Housing is held to front form with
#10-24 fasteners threaded into
housing. (fasteners by others)
8 1/2” min.
15 5/8”
4 13/16”
17 7/16”
13 5/8”
Two (2) 3/4” NPS side
conduit entries in splice box.
14
MOUNTINGS - HP4
BMS
BMS - FRONT
BASE MOUNT, SINGLE
Base mounting over
recessed junction box
(by others). Mounting
plate provided.
BMT
BASE MOUNT, TANDEM
Twin base mounting
over recessed 4-0 box
(by others). Mounting
plate provided.
15 5/8”
17 5/8”
17 7/16”
Recessed
4-0 box
(by others)
5 15/16”
SPM - FRONT
5 15/16”
5 1/2”
SPM - SIDE
TPM - TANDEM
5 1/2”
5 1/2”
Four (4) set screws
secure fixture to
supplied mounting
17 5/8”
15 5/8”
6 7/8”
16 3/8”
PMS - FRONT
POLE, SINGLE
Pole mounting on 2 3/8”
dia. x 4” long tenon
(by others). Slip fitter
secured with supplied
fastener bolts.
POLE, TANDEM
Twin pole mounting
on 2 3/8” dia. x 4” long
tenon (by others).
Slip fitter secured with
supplied fastener bolts.
Recessed
4-0 box
(by others)
5 1/2”
Four (4) set screws
secure fixture to
supplied mounting
17 1/16”
PMS
PMT
BMT - TANDEM
22 3/4”
6 7/8”
PENDANT, SINGLE
Top pendant mounting
below recessed junction
box (by others). Mounting plate provided.
PENDANT, TANDEM
Twin pendant mounting
below recessed junction
box (by others). Mounting plate provided.
11 3/8”
16 3/8”
SPM
TPM
BMS - SIDE
11 3/8”
22 3/4”
PMS - SIDE
11 3/8”
16 3/8”
PMT - TANDEM
22 3/4”
6 7/8”
15 5/8”
19 3/4”
19”
3 3/8”
4 1/8”
15
ORDERING GUIDE - HP3
HP3 Wall Mounted
EXAMPLE:
HP3
150M
120
HFW
SDE
Model
Lamps
Voltage
Distribution
Mounting
HP3
INCANDESCENT:
116I A21, med. base
HID:
50S
E17, med. base
70S
E17, med. base
100S E17, med. base
1
150S E17, med. base
50M E17, med. base
70M E17, med. base
100M E17, med. base
150M1 E17, med. base
100H B17, med. base
120
208
220
240
277
347
120/277
TB
TBV
HFW
LHW
LFW
LLW
LRW
HSC
HNC
HAC
High Forward Wall
Low Horizontal Wall
Low Forward Wall
Low Left Wall
Low Right Wall
High Symmetrical Ceiling
High Narrow Ceiling
High Asymmetrical Ceiling
Notes:
1
Not available with RSB and RDE.
2
Includes two fixtures and one mounting.
3
SF is only available with 120, 277 or 347 Volt, HID only.
4
DF is only available with 208, 220 or 240 Volt, HID only.
5
NEMA twist-lock receptacle only. Photo control by others.
WH
16
DNAT
GR
STG
SND
BMS Base mount,
single
BMT2 Base mount,
tandem
PFD Plaster frame,
direct entry
PFS Plaster frame,
splice box
PMS Pole,
single
PTM2 Pole,
tandem
RDE Recessed,
direct entry
RSB Recessed,
splice box
SDE Surface,
direct entry
SNB Surface,
no box
SPM Pendant,
single
SSB Surface,
splice box
TPM2 Pendant,
tandem
TVG
SF
LPI
BL
Options
Lamp
Finish
3
LPI
SF
Singe Fuse
DF4 Double Fuse
1,5
PER Photo Control
Receptable
QRS Quartz Emergency
Restrike
BZ
GN
Lamp
BL Black
Included BZ Bronze
DDB Dark
Bronze
DNA Natural
Alum.
GN Green
GR Gray
SND Sand
STG Steel Gray
TVG Terra Verde
Green
WH White
CF Custom
Finish
DDB
BL
ORDERING GUIDE - HP4
EXAMPLE:
HP4
Product
HP4
250M
120
Lamp Type
HID:
100S
150S
250S1
175M
200M1
250M1
250H1
ED23 ½ Mogul
ED23 ½ Mogul
ED28
Mogul
ED28
Mogul
ED28
Mogul
ED28
Mogul
ED28
Mogul
Voltage
120
208
220
240
277
347
480
120/277
TB
TBV
SNB
Optional Lenses2
FLG3 Flat Lens
Tempered Glass
FLP4 Flat Lens
Polycarbonate
Mounting
BMS
BMT5
PMS
PTM5
RSB
SNB
SPM
TPM5
Notes:
1
Not available with RSB mounting.
2
Will be used in place of standard lens.
3
175 Watt maximum, reflector is not adjustable with this lens.
4
150 Watt maximum, reflector is not adjustable with this lens.
5
Includes two fixtures and one mounting.
6
SF is only available with 120, 277 or 347 volts on HID only.
7
DF is only available with 208, 220 or 240 volts on HID only.
8
NEMA twist-lock receptacle only. Photo control by others.
WH
DNAT
GR
STG
SSB
SND
SF
Base Mount,
Single
Base Mount,
Tandem
Pole Mount,
Single
Pole Tandem,
Mount
Recessed with
Splice Box
Surface,
No Box
Single Pendant
Mount
Tandem Pendant
Mount
Surface with
Splice Box
TVG
LPI
Option
SF6
Single Fuse
Double Fuse
DF7
PER1,8 Photo Cell
Receptacle
QRS Quartz Re-Strike
BZ
GN
Lamp
LPI Lamp
Included
DDB
BL
Finish
BL Black
BZ Bronze
DDB Dark
Bronze
DNA Natural
Alum.
GN Green
GR Gray
SND Sand
STG Steel Gray
TVG Terra Verde
Green
WH White
CF Custom
Finish
BL
17
Form No. 106.15 11/04
12881 Bradley Avenue, Sylmar, CA 91342
T 818.362.9465 F 818.362.6548
Email: custserv@hydrel.com
www.hydrel.com
©2004 Acuity Brands, Inc. All rights reserved. “Hydrel” is a trademark of Acuity Brands, Inc.