ANKUR SHARMA
Mobile: 8802463509
~Email: ankur1986sharma@gmail.com
Actively seeking a role that will continually provide challenge, ideally within a dynamic and growing
organisation. Leading by example and maintaining, developing and carrying on the direction and
development of new and existing projects, I hopes to continue in focussing on the growth and
expansion of the company, implementing cost saving strategies, as well as adding to the
organisation’s bottom line.
Professional Profile
o
Technically accomplished professional with nearly 8 years rich experience in Design with renowned
Organisation.
o
Currently associated with Asiatic Electrical & Switchgears Pvt. Ltd. as a Sr. Design Engineer.
o
Experienced in giving anticipating consequences of new designs, initiating solutions and finishing project
designing with full perfection.
o
Designed and implemented various H.T & M.V panels used in Domestic & International Markets.
o
Technical Expertise in Auto-Cad, Unigraphics (NX 6,8.5 & 9) & M.S. Office
o
Basic knowledge about GD & T.
Career Highlights
ASIATIC ELECTRICAL & SWITCHGEARS PVT. LTD.
Sr. Design Engineer

Since OCTOBER’ 08
Asiatic Electrical & Switchgears Pvt. Ltd. (An ISO-9001:2008, ISO 14001 & ISO 18001 Certified Company)
Originally Manufacturer & Exporter of H/T, M/V & L/T Switchgears like VCB panels, VCB Breaker,
Feeder Pillar, Fuse Carriers & Base, Distribution Board, Expulsion cut-out(Porcelain & Silicone), G.O.A.B.
Switch (Porcelain & Silicone), Expulsion Fuse Cut-out(Porcelain & Silicone),Surge Arrestor(Porcelain &
Silicone) and Heavy Duty Cut-out of Different versions.
Key Deliverables;
Key roll and responsibilities










Participating in meetings related to design & new product development.
Developing new product Design as per customer requirement & specifications.
Reading customer specification and preparing Cost sheets, Calculation of Bus bar Al. /Cu., General
Arrangement and Layout Drawings as per specification.
Generating Detail Bom, Drawing, Isometric Drawing, and Single Line Diagram for all L.T. /H.T. product &
associated component after order acceptance.
3D Modelling (Solid Modelling), curve modelling, Drafting, Assembly & Sheet metal enclosure design in
Unigraphics.
Drawings of Moulds, Special Purpose Tools, Inspection gauges, fixtures etc.
Drawings of special purpose machines, Drawing Control, Various Design office Practices, Design Manuals &
instructions etc.
Providing design support at all stages of the design process by working closely with production people
involved in Fabrication, Machining & Assembly.
Responsible for the documentation of layouts, and designs up to and including final engineering drawings.
Generating ECN (Engg. Change Note) wherever modification required in drawing.
New Product Development


Handling the process of new product research & development such as reading customer specification,
generating tentative drawing, helping market people for costing & estimation after order awarded by
customer Generating BOM & all drawings (component drawing) for prototype sample.
Conducting trials identify any changes make final modifications in BOM & drawing for Production and
release the same for final production.
Significant Highlights


Managed Design and Development of range of Product / Engineering Equipment.
Have worked under various Design & Development of products like LV, MV & HT panels, Railway
Composite Insulator, Surge Arrestor, Expulsion Fuse Cut-out and Gang Operated Air Break
Switches, Line Insulators 11 & 33kV Vacuum circuit breaker & 11kV, 630-2000A VCB panel
(Indoor/Outdoor both) etc.

Key role in implementation of ISO 9001 regarding to Design & Development Department.
STALLION INFRASTRUCTURE PVT. LTD.
AUGUST’ 07 TO SEPTEMBER 08
Draughtsman

Stallion Infrastructure Pvt. Ltd.(An ISO-9001:2000 Certified Company) Originally Manufacturer of Grills ,
Glass Railings, Stair case railing, Glass doors, Balustrade railing, Wall & Facia Cladding, tower Etc
Job Profile





Preparing 2D Drawing
General Arrangement Drawing, Detail Drawing, Isometric Drawing
Convert 2D drawing into a 3D in Unigrgraphics 8.5
Rendering in unigraphics.
Convert 2D drawing into PDF. (Acrobat reader), DWF, Bitmap etc. formats.
Personality Traits



Persuasive & Team leader
Warm, friendly and engaging personality
Ability to work hard and smart
Interest & Activities




Appreciating music & to participation in social work
Interested in yoga
Playing chess & cricket
Reading Novel
Education
Degree in Mechanical Engineering
karnataka state open university
Diploma in Mechanical Engineering
G.B Pant Polytechnic (Delhi)( 2008-2012)
I.T.I in Tool & Die MAKER (Press Tool , Jig & Fixtures)
I.T.I Arab Ki Sarai, Nizammudin (2004-2007)
Class XII
C.B.S.E BOARD New Delhi (2004)
Class X
C.B.S.E BOARD New Delhi.(2002)
Personal Vitae
Date of Birth
:
18th Aug 1986
Permanent Address
:
A-56 Shastri Nagar,
New Delhi-110052
Languages Known
:
English, Hindi (Read, Write & Speak).
Place
:
Date
:
NEW DELHI
(ANKUR SHARMA)