
A Serpentina profile can be defined by Serpentina part number
(1015H, 445V, 660H, etc.), by USG Curvatura part number (10A, 4B,
6E, etc.) or by the geometry of the circle.

If you have part numbers (Serpentina or Curvatura) you are finished with Step One, proceed to Step Two!
No part numbers? Any two of the following three measurements gets you a Serpentina part number:
1.
Radius Dimension…………………………………………………………………..

2.
Chord Length…………………………………………………………………………

3.
Chord Depth…………………………………………………………………………..

If you have the geometry proceed to Step Two!
No geometry? Sorry, contact the designer and get the entire scope of the project!
 If the Serpentina will be used in a corridor, how long is the corridor?
The serpentina profile defines one dimension, and the depth (or length if you prefer) defines the other.
Now, that you have the area you are finished with Step Two proceed to Step
Three!
No depth? Sorry, contact the designer and get the entire scope of the project!


 Serpentina may be completely suspended in any given area or it may stop (finish) against a wall, for instance. If suspended both curved and straight perimeter trim should be used to finish the exposed
 edges. If the serpentina finishes into a wall, “J” molding (wall angle) and regular main beams may be used to provide a finished edge.

If you know how the edges are to be finished proceed to Step Four!
What!? No, edge finish information? Sorry, contact the designer and get the entire scope of the project!

Specify which infill panel by type (R250, etc.) and size (2x2, etc.). Be sure to check compatibility for Optima panels! Optima infill panels do
not fit all Serpentina main beams!

Congratulations! You have everything you need for a fast, accurate and friendly
Serpentina Price quote!
Still puzzled? Refer to the Serpentina Product Brochure
(Document #CS-3211-699-Y) or the Serpentina Web Page: http://38.202.5.102/commercial/americas/serpentina/
Remember, All Four Steps are required for a complete and accurate price quote!
Serpentina Customer Service
(800) 840-8521
(800) 769-1162 fax