International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an
International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee.
When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for
processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting
a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria
remaining the same.
CD registered
Period from 01 April to 30 April 2011
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 8
Ships and marine technology
ISO/CD 16548
Ships and marine technology — Ship design — General guidance on emergency towing procedure
TC 10
Technical product documentation
ISO/CD 15787
Technical product documentation — Heat-treated ferrous parts — Presentation and indications
TC 22
Road vehicles
ISO/CD 151182
Road vehicles — Vehicle to grid Communication Interface — Part 2: Technical protocol description and
open systems interconnections (OSI) requirements
TC 29
Small tools
ISO/CD 603-18
Bonded abrasive products — Dimensions — Part 18: Glass grinding wheels
ISO/CD 2725-1
Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets
ISO/CD 2725-2
Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets
("impact")
TC 34
Food products
ISO
7513:1990/CD
Amd 1
Instant tea in solid form — Determination of moisture content (loss in mass at 103 degrees C) —
Amendment 1
ISO
21569:2005/C
D Amd 1
Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived
products — Qualitative nucleic acid based methods — Amendment 1
ISO
21571:2005/C
D Amd 1
Foodstuffs — Methods of analysis for the detection of genetically modified organisms and derived
products — Nucleic acid extraction — Amendment 1
TC 37
Terminology and other language and content resources
ISO/CD 24621
Language resources management — Segmentation Rules eXchange (SRX)
TC 41
Pulleys and belts (including veebelts)
ISO/CD 1813
Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts
— Electrical conductivity of antistatic belts: Characteristics and methods of test
ISO/CD 11749
Belt drive — V-ribbed belts for the automotive industry — Fatigue test
TC 45
Rubber and rubber products
ISO
12243:2003/C
D Amd 1
Medical gloves made from natural rubber latex — Determination of water-extractable protein using the
modified Lowry method — Amendment 1
TC 58
Gas cylinders
ISO/CD 10297
Transportable gas cylinders — Cylinder valves — Specification and type testing
ISO/CD 10462
Gas cylinders — Transportable cylinders for dissolved acetylene — Periodic inspection and
maintenance
TC 59
Buildings and civil engineering works
ISO/CD 294812
Building information modelling — Information delivery manual — Part 2: Management communication
TC 61
Plastics
ISO/CD 15114
Fibre-reinforced plastic composites — Determination of apparent mode II interlaminar fracture
toughness for unidirectionally reinforced materials
TC 70
Internal combustion engines
ISO/CD 8528-5
Reciprocating internal combustion engine driven alternating current generating sets — Part 5:
Generating sets
ISO/CD 8178-4
Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state
test cycles for different engine applications
TC 71
Concrete, reinforced concrete and pre-stressed concrete
ISO/CD 192011
Testing of concrete — Part 11: Determination of chloride resistance by unilateral diffusion
ISO/CD 192012
Testing concrete — Part 12: Determination of the potential carbonation resistance of concrete —
Accelerated carbonation method
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 12799
Nuclear energy - Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets Carrier gas method
ISO/CD 15651
Nuclear energy - Determination of total hydrogen content in UO2 powder and UO2, (U,Gd) o2 sintered
pellets - Gas extraction method
ISO/CD 16424
Nuclear energy — Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and
determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium
elements
TC 94
Personal safety -- Protective clothing and equipment
ISO/DTS
16976-4
Respiratory protective devices — Human factors — Part 4: Work of breathing and breathing resistance
TC 113
Hydrometry
ISO/CD 1100-1
Hydrometry — Measurement of liquid flow in open channels — Part 1: Establishment and operation of a
gauging station
TC 120
Leather
ISO/CD 11396
Crocodile skins — Description of defects, grading on the basis of defects and size
ISO/CD 11398
Raw ostrich skins — Description of defects, preservation and grading
TC 123
Plain bearings
ISO/DTR
4378-6
Plain bearings — Terms, definitions, classification and symbols — Part 6: Abbreviations
ISO/CD 13939
Foil bearings — Test methods for oil-less foil journal bearings
TC 135
Non-destructive testing
ISO/CD 12715
Ultrasonic non-destructive testing — Reference blocks and test procedures for the characterization of
contact search unit beam profiles
TC 150
Implants for surgery
ISO/CD 5838-1
Implants for surgery — Skeletal pins and wires — Part 1: Material and mechanical requirements
TC 163
Thermal performance and energy use in the built environment
ISO/CD 12655
Presentation of real energy use of buildings
TC 164
Mechanical testing of metals
ISO/CD 16842
Metallic materials — Sheet and strip — Biaxial tensile testing method using cruciform specimen
TC 165
Timber structures
ISO/CD 16507
Timber structures — Performance test methods for wood-based panel assemblies under concentrated
(static and impact) and uniformly distributed loads
TC 172
Optics and photonics
ISO/CD 14889
Ophthalmic optics — Spectacle lenses — Fundamental requirements for uncut finished lenses
TC 181
Safety of toys
ISO/CD 8124-5
Safety of toys — Part 5: Determination of total concentration of certain elements in toys
TC 190
Soil quality
ISO/CD 16387
Soil quality — Effects of pollutants on Enchytraeidae (Enchytraeus sp.) — Determination of effects on
survival and reproduction
TC 204
Intelligent transport systems
ISO/CD 11270
Lane keeping assist systems
ISO/CD 131841
Intelligent transport systems — Guidance protocol via personal ITS station for advisory safety systems
— Part 1: General information and use case definitions
ISO/CD 157842
Data Exchange Involving Roadside Modules Communication — Part 2: Application Profile - SNMP
ISO/CD 26684
Cooperative Intersection Signal Information and Violation Warning Systems (CISIVWS)
TC 207
Environmental management
ISO/DTS
14033
Environmental management — Quantitative environmental information — Guidelines and examples
TC 213
Dimensional and geometrical product specifications and verification
ISO/CD 2538-1
Geometrical product specifications — Wedges — Part 1: Series of angles and slopes
ISO/CD 2538-2
Geometrical product specifications — Wedges — Part 2: Dimensioning and tolerancing
ISO 142531:1998/CD
Amd 1
Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring
equipment — Part 1: Decision rules for proving conformance or non-conformance with specifications —
Amendment 1
TC 221
Geosynthetics
ISO/CD 103181
Geosynthetics — Part 1: Terms and definitions
ISO/CD 103182
Geosynthetics — Part 2: Symbols and Pictograms
JTC 1
Information technology
ISO/IEC CD
20005
Services and Interfaces Supporting Collaborative Information Processing in Intelligent Sensor Networks
ISO/IEC CD
29182-1
Reference architecture for sensor network applications and services — Part 1:
ISO/IEC CD
29182-2
Reference architecture for sensor network applications and services — Part 2: Vocabulary/Terminology
ISO/IEC CD
29182-7
Reference architecture for sensor network applications and services — Part 7: Interoperability
guidelines
ISO/IEC CD
19770-3
Information technology — Software asset management — Part 3: Software entitlement tag
ISO/IEC
138181:2007/PDAM
8
Information technology — Generic coding of moving pictures and associated audio information:
Systems — Part 1: — Amendment 8: Extensions for simplified carriage of MPEG-4 over MPEG-2
ISO/IEC
144965:2001/PDAM
31
Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment
31: Reference software for efficient representation of 3D meshes with multiple attributes
ISO/IEC
1449622:2009/PDAM
Information technology — Coding of audio-visual objects — Part 22: Open Font Format — Amendment
2: Additional script and language tags
2
ISO/IEC
1449627:2009/PDAM
4
Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance —
Amendment 4: Conformance for efficient representation of 3D meshes with multiple attributes
ISO/IEC
154449:2005/PDAM
5
Information technology — JPEG 2000 image coding system: Interactivity tools, APIs and protocols —
Part 9: — Amendment 5: UDP transport and additional enhancements to JPIP
ISO/IEC
29500-1/PDAM
1
Information technology — Document description and processing languages — Office Open XML File
Formats — Part 1: Fundamentals and Markup Language Reference — Amendment 1
ISO/IEC
29500-4/PDAM
1
Information technology — Document description and processing languages — Office Open XML File
Formats — Part 4: Transitional Migration Features — Amendment 1
DIS circulated
Period from 01 April to 30 April 2011
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote
terminates
TC 8
Ships and marine technology
ISO/DIS 614
* Ships and marine technology — Toughened safety glass panes for rectangular windows
and side scuttles — Punch method of non-destructive strength testing
2011-09-05
(Revision of ISO 614:1989)
ISO/DIS 1751
* Ships and marine technology — Ships'side scuttles
2011-09-05
(Revision of ISO 1751:1993)
ISO/DIS 3434
* Shipbuilding and marine structures — Heated glass panes for ships' rectangular
windows
2011-09-05
(Revision of ISO 3434:1992, ISO 3434:1992/Amd 1:2004)
ISO/DIS 3903
* Ships and marine technology — Ships' ordinary rectangular windows
2011-09-05
(Revision of ISO 3903:1993)
ISO/DIS 21005
* Ships and marine technology — Thermally toughened safety-glass panes for windows
and side scuttles
2011-09-05
(Revision of ISO 21005:2004)
ISO/DIS 11209
TC 22
ISO/DIS 15031-4
* Ships and marine technology — Large yachts — Deck crane and access gangways
strength requirements
2011-09-16
Road vehicles
* Road vehicles — Communication between vehicle and external equipment for
emissions-related diagnostics — Part 4: External test equipment
2011-09-16
(Revision of ISO 15031-4:2005)
ISO/DIS 4106
* Motorcycles — Engine test code — Net power
2011-09-02
(Revision of ISO 4106:2004)
TC 23
ISO/DIS 16122-1
ISO/DIS 16122-2
ISO/DIS 16122-3
TC 33
ISO/DIS 19271.2
Tractors and machinery for agriculture and forestry
* Agricultural and forestry machinery — Inspection of sprayers and liquid fertilizer
distributors in use — Part 1: General
2011-09-22
* Agricultural and forestry machinery — Inspection of sprayers and liquid fertilizer
distributors in use — Part 2: Horizontal boom sprayers and similar
2011-09-22
* Agricultural and forestry machinery — Inspection of sprayers and liquid fertilizer
distributors in use — Part 3: Sprayers for bush and tree crops
2011-09-22
Refractories
* Unshaped (monolithic) refractory products — Part 1: Introduction and classification
2011-06-29
(Revision of ISO 1927:1984)
ISO/DIS 14720-1
ISO/DIS 14720-2
* Testing of ceramic raw and basic materials — Determination of sulfur in powders and
granules of non-oxidic ceramic raw and basic materials — Part 1: Infrared measurement
methods
* Testing of ceramic raw and basic materials — Determination of sulfur in powders and
granules of non-oxidic ceramic raw and basic materials — Part 2: Inductively coupled
plasma atomic emission spectrometry (ICP/AES) or ion chromatography after burning in
an oxygen flow
TC 34
Food products
ISO/DIS 11747
Rice — Determination of rice kernel hardness after cooking — Extrusion method
2011-09-22
2011-09-22
2011-09-15
TC 35
Paints and varnishes
ISO/DIS 15184
Paints and varnishes — Determination of film hardness by pencil test
2011-09-22
(Revision of ISO 15184:1998)
ISO/DIS 20567-3
TC 41
ISO
9856:2003/DAmd
1
TC 44
ISO/DIS 2553
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 3:
Single-impact test with a free-flying impact body
2011-09-29
Pulleys and belts (including veebelts)
* Conveyor belts — Determination of elastic and permanent elongation and calculation of
elastic modulus — Amendment 1
2011-09-22
Welding and allied processes
* Welding and allied processes — Symbolic representation on drawings — Welded,
brazed and soldered joints
2011-09-08
(Revision of ISO 2553:1992)
ISO/DIS 15012-1
* Health and safety in welding and allied processes — Equipment for capture and
separation of welding fume — Part 1: Requirements for testing and marking of
separation efficiency
2011-09-08
(Revision of ISO 15012-1:2004)
ISO/DIS 1561414
ISO/DIS 9455-10
Specification and qualification of welding procedures for metallic materials — Welding
procedure test — Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys
* Soft soldering fluxes — Test methods — Part 10: Flux efficacy test, solder spread
method
2011-09-15
2011-09-22
(Revision of ISO 9455-10:1998)
ISO/DIS 9455-16
* Soft soldering fluxes — Test methods — Part 16: Flux efficacy test, wetting balance
method
(Revision of ISO 9455-16:1998)
2011-09-22
TC 45
ISO/DIS 1432
Rubber and rubber products
* Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening
(Gehman test)
2011-09-13
(Revision of ISO 1432:1988, ISO 1432:1988/Cor 1:2003)
ISO/DIS 2782-1
* Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part
1: Differential-pressure methods
2011-09-20
(Revision of ISO 2782:2006)
ISO/DIS 2782-2
* Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part
2: Equal-pressure method
2011-09-20
(Revision of ISO 2782:2006)
ISO/DIS 4650.2
* Rubber — Identification — Infrared spectrometric method
2011-06-15
(Revision of ISO 4650:2005)
ISO/DIS 18898
* Rubber — Calibration and verification of hardness testers
2011-09-05
(Revision of ISO 18898:2006)
TC 54
Essential oils
ISO/DIS 3528
Oil of mandarin, Italian type (Citrus reticulata Blanco)
2011-09-16
(Revision of ISO 3528:1997, ISO 3528:1997/Cor 1:1998)
TC 58
Gas cylinders
ISO/DIS 11119-2
Gas cylinders of composite construction — Specification and test methods — Part 2:
Fully wrapped fibre reinforced composite gas cylinders and tubes with load-sharing
metal liners
2011-09-28
(Revision of ISO 11119-2:2002)
TC 59
ISO/DIS 159285.2
TC 61
Buildings and civil engineering works
* Houses — Description of performance — Part 5: Operating energy
2011-06-23
Plastics
ISO 103501:2007/DAmd 1
* Plastics — Acquisition and presentation of comparable single-point data — Part 1:
Moulding materials — Amendment 1
2011-09-15
ISO/DIS 13975
* Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in
controlled slurry digestion systems — Method by measurement of biogas production
2011-09-05
* Determination of the ultimate aerobic biodegradability of plastics materials in soil by
measuring the oxygen demand in a respirometer or the amount of carbon dioxide
2011-09-15
ISO/DIS 17556
evolved
(Revision of ISO 17556:2003)
ISO/DIS 4892-3
* Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV
lamps
2011-09-15
(Revision of ISO 4892-3:2006)
ISO/DIS 3673-2
* Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of
properties
2011-09-15
(Revision of ISO 3673-2:2007)
ISO/DIS 14322
ISO/DIS 1887
* Plastics — Epoxy resins — Determination of degree of cure of cured epoxy resins by
differential scanning calorimetry
2011-09-13
* Textile glass — Determination of combustible-matter content
2011-09-30
(Revision of ISO 1887:1995)
ISO/DIS 12815
* Fibre-reinforced plastic composites — Determination of plain-pin bearing strength
2011-09-02
ISO/DIS 12817
* Fibre-reinforced plastic composites — Determination of open-hole compression strength
2011-09-07
ISO/DIS 13931
* Carbon fibre — Determination of volume resistivity
2011-09-20
TC 67
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries
ISO/DIS 13503-6
Petroleum and natural gas industries — Completion fluides and materials — Part 6:
Procedure for measuring leakoff of completion fluids under dynamic conditions
2011-09-22
Petroleum, petrochemical and natural gas industries — Fired heaters for general
refinery service
2011-09-22
ISO/DIS 13705
(Revision of ISO 13705:2006)
ISO/DIS 23251
Petroleum, petrochemical and natural gas industries — Pressure-relieving and
depressuring systems
2011-09-08
(Revision of ISO 23251:2006)
TC 71
ISO/DIS 16311-3
ISO/DIS 16311-4
Concrete, reinforced concrete and pre-stressed concrete
* Maintenance and repair of concrete structures — Part 3: Design of repairs and
prevention
2011-09-20
* Maintenance and repair of concrete structures — Part 4: Execution of repairs and
prevention
2011-09-20
TC 86
ISO/DIS 14903
Refrigeration and air-conditioning
* Refrigerating systems and heat pumps - Qualification of tightness of components and
joints
TC 96
Cranes
ISO/DIS 4306-2
Cranes — Vocabulary — Part 2: Mobile cranes
2011-09-09
2011-09-28
(Revision of ISO 4306-2:1994)
TC 113
ISO/DIS 6421
Hydrometry
* Hydrometry — Methods for assessment of reservoir sedimentation
2011-09-12
TC 126
ISO/DIS 20773
Tobacco and tobacco products
* Cigarettes — Determination of nicotine-free dry particulate matter and nicotine in
sidestream smoke — Method using a routine analytical linear smoking machine
equipped with a fishtail chimney
2011-09-14
(Revision of ISO 20773:2007)
ISO/DIS 20774
* Cigarettes — Determination of carbon monoxide in sidestream smoke — Method using
a routine analytical linear smoking machine equipped with a fishtail chimney
2011-09-13
(Revision of ISO 20774:2007)
TC 135
ISO/DIS 3452-1
Non-destructive testing
* Non-destructive testing — Penetrant testing — Part 1: General principles
2011-09-08
(Revision of ISO 3452-1:2008)
ISO/DIS 16809
* Non-destructive testing — Ultrasonic thickness measurement
2011-09-16
TC 146
ISO/DIS 13199
TC 150
ISO 58323:1996/DAmd 1
TC 159
ISO/DIS 9241154
TC 172
Air quality
* Stationary source emissions — Determination of total volatile organic compounds
(TVOC) in waste gases from non-combustion processes — Non-dispersive infrared
method equipped with catalytic converter
2011-09-08
Implants for surgery
* Implants for surgery — Metallic materials — Part 3: Wrought titanium 6-aluminium 4vanadium alloy — Amendment 1
2011-09-13
Ergonomics
* Ergonomics of human-system interaction — Part 154: Interactive voice response (IVR)
applications
Optics and photonics
2011-09-08
ISO/DIS 8039
* Microscopes — Values, tolerances and symbols for magnification
2011-09-21
(Revision of ISO 8039:1997)
TC 193
ISO/DIS 13686
Natural gas
* Natural gas — Quality designation
2011-09-29
(Revision of ISO 13686:1998)
ISO/DIS 10723
* Natural gas — Performance evaluation for on-line analytical systems
2011-09-29
(Revision of ISO 10723:1995, ISO 10723:1995/Cor 1:1998)
TC 201
ISO/DIS 16129
TC 202
ISO/DIS 15632
Surface chemical analysis
* Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for
assessing the day-to-day performance of an X-ray photoelectron spectrometer
2011-09-07
Microbeam analysis
* Microbeam analysis — Instrumental performance parameters for the specification and
checking of energy-dispersive X-ray spectrometers for use in electron probe
microanalysis
2011-09-28
(Revision of ISO 15632:2002)
TC 206
ISO/DIS 11894-1
TC 213
ISO/DIS 174502.2
Fine ceramics
* Fine ceramic (advanced ceramics, advanced technical ceramics) — Test method for
conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ionconducting solid electrolytes
2011-09-12
Dimensional and geometrical product specifications and verification
* Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets,
specifications, operators, uncertainties and ambiguities
2011-06-15
(Revision of ISO/TS 17450-2:2002, ISO/TS 17450-2:2002/Cor 1:2004)
TC 215
ISO/DIS 13120
Health informatics
* Health informatics - Syntax to represent the content of healthcare classification systems
- Classification Markup Language (ClaML)
TC 228
Tourism and related services
ISO/DIS 13293
Recreational diving services — Requirements for gas blender training programmes
2011-09-22
2011-09-15
TC 236
ISO/DIS 21500
Project Committee: Project Management
* Guidance on project management
2011-09-05
TC 244
Industrial furnaces and associated processing equipment
ISO/DIS 13579-1
Industrial furnaces and associated processing equipment — Method of measuring
energy balance and calculating efficiency — Part 1: General methodology
2011-09-21
Industrial furnaces and associated processing equipment — Method of measuring
energy balance and calculating efficiency — Part 2: Reheating furnace for steel
2011-09-21
ISO/DIS 13579-2
ISO/DIS 13579-3
ISO/DIS 13579-4
TC 250
ISO/DIS 20121
Industrial furnaces and associated processing equipment — Method of measuring
energy balance and calculating efficiency — Part 3: Batch-type aluminium melting
furnace
2011-09-21
Industrial furnaces and associated processing equipment — Method of measuring
energy balance and calculating efficiency — Part 4: Furnaces with protective or reactive
atmosphere
2011-09-21
Project committee: Sustainability in event management
* Event sustainability management systems — Requirements with guidance for use
2011-09-12
CASCO
Committee on conformity assessment
ISO/IEC DIS
17024
Conformity assessment — General requirements for bodies operating certification of
persons
2011-09-15
(Revision of ISO/IEC 17024:2003)
JTC 1
ISO/IEC DIS
30170
ISO/IEC DIS
27006
Information technology
* Information technology — Programming languages — Ruby
2011-09-07
Information technology — Security techniques — Requirements for bodies providing
audit and certification of information security management systems
2011-09-30
(Revision of ISO/IEC 27006:2007)
FDIS circulated
Period from 01 April to 30 April 2011
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date
shown
* Available in English only
Vote
terminates
IIW
ISO/FDIS 14372
International Institute of Welding
* Welding consumables — Determination of moisture resistance of manual metal arc
welding electrodes by measurement of diffusible hydrogen
2011-06-08
(Revision of ISO 14372:2000)
TC 2
ISO/FDIS 1580
Fasteners
* Slotted pan head screws — Product grade A
2011-07-08
(Revision of ISO 1580:1994)
ISO/FDIS 2009
* Slotted countersunk flat head screws — Product grade A
2011-07-08
(Revision of ISO 2009:1994)
ISO/FDIS 2010
* Slotted raised countersunk head screws — Product grade A
2011-07-08
(Revision of ISO 2010:1994)
ISO/FDIS 7045
* Pan head screws with type H or type Z cross recess — Product grade A
2011-07-08
(Revision of ISO 7045:1994)
ISO/FDIS 7046-1
* Countersunk flat head screws (common head style) with type H or type Z cross recess
— Product grade A — Part 1: Steel of property class 4.8
2011-07-08
(Revision of ISO 7046-1:1994)
ISO/FDIS 7046-2
* Countersunk flat head screws (common head style) with type H or type Z cross recess
— Product grade A — Part 2: Steel of property class 8.8, stainless steel and nonferrous metals
2011-07-08
(Revision of ISO 7046-2:1990)
ISO/FDIS 7047
* Raised countersunk head screws (common head style) with type H or type Z cross
recess — Product grade A
2011-07-08
(Revision of ISO 7047:1994)
ISO/FDIS 7380-1
* Button head screws — Part 1: Button head with hexagon socket
2011-06-22
(Revision of ISO 7380:2004)
ISO/FDIS 7380-2
* Button head screws — Part 2: Button head with collar and hexagon socket
2011-06-22
(Revision of ISO 7380:2004)
TC 5
ISO/FDIS 70051.2
Ferrous metal pipes and metallic fittings
* Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
2011-06-21
(Revision of ISO 7005-1:1992)
TC 6
ISO/FDIS 12625-1
Paper, board and pulps
* Tissue paper and tissue products — Part 1: General guidance on terms
2011-06-29
(Revision of ISO 12625-1:2005)
TC 10
ISO/FDIS 29845
Technical product documentation
* Technical product documentation — Document types
2011-06-09
TC 20
ISO/FDIS 10786
Aircraft and space vehicles
* Space systems — Structural components and assemblies
2011-06-09
ISO/FDIS 14300-1
* Space systems — Programme management — Part 1: Structuring of a project
2011-06-09
(Revision of ISO 14300-1:2001)
TC 21
ISO/FDIS 2192710
TC 22
ISO/FDIS 22901-2
ISO/FDIS 26262-1
Equipment for fire protection and fire fighting
* Smoke and heat control systems — Part 10: Specification for power output devices
2011-06-19
Road vehicles
* Road vehicles — Open diagnostic data exchange (ODX) — Part 2: Emissions-related
diagnostic data
2011-06-06
* Road vehicles — Functional safety — Part 1: Vocabulary
2011-06-28
ISO/FDIS 26262-2
* Road vehicles — Functional safety — Part 2: Management of functional safety
2011-06-28
ISO/FDIS 26262-3
* Road vehicles — Functional safety — Part 3: Concept phase
2011-06-28
ISO/FDIS 26262-4
* Road vehicles — Functional safety — Part 4: Product development at the system level
2011-06-28
ISO/FDIS 26262-5
ISO/FDIS 26262-6
* Road vehicles — Functional safety — Part 5: Product development at the hardware
level
2011-06-28
* Road vehicles — Functional safety — Part 6: Product development at the software level
2011-06-28
ISO/FDIS 26262-7
* Road vehicles — Functional safety — Part 7: Production and operation
2011-06-28
ISO/FDIS 26262-8
* Road vehicles — Functional safety — Part 8: Supporting processes
2011-06-28
ISO/FDIS 26262-9
ISO/FDIS 16121-2
* Road vehicles — Functional safety — Part 9: Automotive Safety Integrity Level (ASIL)oriented and safety-oriented analyses
2011-06-28
* Road vehicles — Ergonomic requirements for the driver's workplace in line-service
buses — Part 2: Visibility
2011-06-12
(Revision of ISO 16121-2:2005)
ISO/FDIS 16121-3
* Road vehicles — Ergonomic requirements for the driver's workplace in line-service
buses — Part 3: Information devices and controls
2011-06-12
(Revision of ISO 16121-3:2005)
ISO/FDIS 16121-4
* Road vehicles — Ergonomic requirements for the driver's workplace in line-service
buses — Part 4: Cabin environment
2011-06-12
(Revision of ISO 16121-4:2005)
TC 23
ISO/FDIS 5692-3
ISO/FDIS 6489-5
ISO/FDIS 1178311
Tractors and machinery for agriculture and forestry
* Agricultural vehicles — Mechanical connections on towed vehicles — Part 3: Swivel
hitch rings
2011-06-29
* Agricultural vehicles — Mechanical connections between towed and towing vehicles —
Part 5: Specifications for non-swivel clevis couplings
2011-06-16
* Tractors and machinery for agriculture and forestry — Serial control and
communications data network — Part 11: Mobile data element dictionary
2011-06-09
(Revision of ISO 11783-11:2007)
TC 28
ISO/FDIS 13738
Petroleum products and lubricants
* Lubricants, industrial oils and related products (class L) — Family E (Internal
combustion engine oils) — Specifications for two-stroke-cycle gasoline engine oils
(categories EGB, EGC and EGD)
(Revision of ISO 13738:2000)
TC 34
ISO/FDIS 6646
Food products
* Rice — Determination of the potential milling yield from paddy and from husked rice
2011-06-05
2011-06-12
(Revision of ISO 6646:2000)
ISO
16140:2003/FDAm
d1
* Microbiology of food and animal feeding stuffs — Protocol for the validation of
alternative methods — Amendment 1
2011-06-29
ISO/FDIS 22118
* Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for
the detection and quantification of food-borne pathogens — Performance characteristics
2011-06-15
* Microbiology of food and animal feeding stuffs — Real-time polymerase chain reaction
(PCR) for the detection of food-borne pathogens — General requirements and
definitions
2011-06-15
ISO
9936:2006/FDAmd
1
* Animal and vegetable fats and oils — Determination of tocopherol and tocotrienol
contents by high-performance liquid chromatography — Amendment 1: Updating of
reagents and confirmation of statistical data validity
2011-06-29
ISO
15753:2006/FDAm
d1
* Animal and vegetable fats and oils — Determination of polycyclic aromatic
hydrocarbons — Amendment 1: Exclusion of olive pomace oil from the scope
ISO/FDIS 11037
* Sensory analysis — Guidelines for sensory assessment of the colour of products
ISO/FDIS 22119
2011-06-29
2011-06-28
(Revision of ISO 11037:1999)
ISO/FDIS 29842
* Sensory analysis — Methodology — Balanced incomplete block designs
2011-06-15
TC 35
ISO/FDIS 6272-1
Paints and varnishes
* Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Fallingweight test, large-area indenter
2011-06-22
(Revision of ISO 6272-1:2002)
ISO/FDIS 6272-2
* Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Fallingweight test, small-area indenter
2011-06-22
(Revision of ISO 6272-2:2002)
TC 38
ISO/FDIS 14184-1
Textiles
* Textiles — Determination of formaldehyde — Part 1: Free and hydrolysed formaldehyde
(water extraction method)
2011-07-22
(Revision of ISO 14184-1:1998)
ISO/FDIS 14184-2
* Textiles — Determination of formaldehyde — Part 2: Released formaldehyde (vapour
absorption method)
2011-07-22
(Revision of ISO 14184-2:1998)
ISO
139:2005/FDAmd
1
* Textiles — Standard atmospheres for conditioning and testing — Amendment 1
2011-06-08
TC 46
ISO/FDIS 25964-1
Information and documentation
* Information and documentation — Thesauri and interoperability with other vocabularies
— Part 1: Thesauri for information retrieval
2011-06-07
(Revision of ISO 2788:1986, ISO 5964:1985)
TC 59
ISO/FDIS 11863
ISO
11600:2002/FDAm
d1
TC 79
ISO/FDIS 7271
Buildings and civil engineering works
* Buildings and building-related facilities — Functional and user requirements and
performance — Tools for assessment and comparison
2011-06-06
* Building construction — Jointing products — Classification and requirements for
sealants — Amendment 1
2011-06-15
Light metals and their alloys
* Aluminium and aluminium alloys — Foil and thin strip — Dimensional tolerances
2011-06-02
(Revision of ISO 7271:1982)
TC 83
ISO/FDIS 7331
Sports and recreational equipment
* Ski-poles for alpine skiing — Requirements and test methods
2011-06-09
(Revision of ISO 7331:2005)
TC 85
ISO/FDIS 11311
ISO/FDIS 27468
TC 106
ISO/FDIS 10271
Nuclear energy, nuclear technologies, and radiological protection
* Nuclear criticality safety — Critical values for homogeneous plutonium-uranium oxide
fuel mixtures outside of reactors
2011-06-09
* Nuclear criticality safety — Evaluation of systems containing PWR UOX fuels —
Bounding burnup credit approach
2011-06-09
Dentistry
* Dentistry — Corrosion test methods for metallic materials
2011-06-29
(Revision of ISO 10271:2001, ISO 10271:2001/Cor 1:2005)
ISO
15912:2006/FDAm
d1
* Dentistry — Casting investments and refractory die materials — Amendment 1:
Requirement and test method for adequacy of expansion of Type 1 and Type 2
materials
ISO/FDIS 7711-2
* Dentistry — Rotary diamond instruments — Part 2: Discs
2011-06-22
2011-06-22
(Revision of ISO 7711-2:1992)
TC 108
ISO/FDIS 7626-1
Mechanical vibration, shock and condition monitoring
* Mechanical vibration and shock — Experimental determination of mechanical mobility
— Part 1: Basic terms and definitions, and transducer specifications
2011-06-15
(Revision of ISO 7626-1:1986)
ISO/FDIS 1606341
TC 122
ISO/FDIS 11156
* Methods for the calibration of vibration and shock transducers — Part 41: Calibration of
laser vibrometers
2011-06-30
Packaging
* Packaging — Accessible design — General requirements
2011-06-06
TC 126
Tobacco and tobacco products
ISO
10315:2000/FDAm
d1
* Cigarettes — Determination of nicotine in smoke condensates — Gas-chromatographic
method — Amendment 1
2011-06-28
ISO 103621:1999/FDAmd 1
* Cigarettes — Determination of water in smoke condensates — Part 1: Gaschromatographic method — Amendment 1: .
2011-06-28
ISO 103622:1994/FDAmd 1
* Cigarettes — Determination of water in smoke condensates — Part 2: Karl Fischer
method — Amendment 1
2011-06-28
TC 127
ISO/FDIS 2867
Earth-moving machinery
* Earth-moving machinery — Access systems
2011-06-08
(Revision of ISO 2867:2006)
TC 138
ISO/FDIS 9311-2
Plastics pipes, fittings and valves for the transport of fluids
* Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength
2011-06-29
(Revision of ISO 9311-2:2002)
TC 150
ISO/FDIS 7207-2
Implants for surgery
* Implants for surgery — Components for partial and total knee joint prostheses — Part 2:
Articulating surfaces made of metal, ceramic and plastics materials
2011-06-09
(Revision of ISO 7207-2:1998)
TC 155
ISO/FDIS 11435
Nickel and nickel alloys
* Nickel alloys — Determination of molybdenum content — Inductively coupled
plasma/atomic emission spectrometric method
2011-06-30
(Revision of ISO 11435:2005)
TC 156
ISO/FDIS 8565
Corrosion of metals and alloys
* Metals and alloys — Atmospheric corrosion testing — General requirements
2011-06-08
(Revision of ISO 8565:1992)
TC 159
Ergonomics
ISO/FDIS 9241420
* Ergonomics of human-system interaction — Part 420: Selection of physical input
devices
2011-06-08
ISO/FDIS 9241910
* Ergonomics of human-system interaction — Part 910: Framework for tactile and haptic
interaction
2011-06-08
TC 172
ISO/FDIS 10943
Optics and photonics
* Ophthalmic instruments — Indirect ophthalmoscopes
2011-07-15
(Revision of ISO 10943:2006)
ISO/FDIS 21254-1
* Lasers and laser-related equipment — Test methods for laser-induced damage
threshold — Part 1: Definitions and general principles
2011-06-15
(Revision of ISO 11254-1:2000, ISO 11254-2:2001)
ISO/FDIS 21254-2
* Lasers and laser-related equipment — Test methods for laser-induced damage
threshold — Part 2: Threshold determination
2011-06-15
(Revision of ISO 11254-1:2000, ISO 11254-2:2001)
ISO/FDIS 21254-3
* Lasers and laser-related equipment — Test methods for laser-induced damage
threshold — Part 3: Assurance of laser power (energy) handling capabilities
2011-06-15
(Revision of ISO 11254-3:2006)
TC 173
ISO/FDIS 9999
Assistive products for persons with disability
* Assistive products for persons with disability — Classification and terminology
2011-06-22
(Revision of ISO 9999:2007, ISO 9999:2007/Cor 1:2007)
TC 198
ISO/FDIS 14160
Sterilization of health care products
* Sterilization of health care products — Liquid chemical sterilizing agents for single-use
medical devices utilizing animal tissues and their derivatives — Requirements for
characterization, development, validation and routine control of a sterilization process
for medical devices
2011-06-08
(Revision of ISO 14160:1998)
TC 201
ISO/FDIS 27911
TC 204
ISO/FDIS 14825
Surface chemical analysis
* Surface chemical analysis — Scanning-probe microscopy — Definition and calibration
of the lateral resolution of a near-field optical microscope
2011-06-29
Intelligent transport systems
* Intelligent transport systems — Geographic Data Files (GDF) — GDF5.0
2011-06-22
(Revision of ISO 14825:2004)
TC 206
ISO/FDIS 10677
TC 213
ISO/FDIS 22432
TC 219
ISO/FDIS 10965
Fine ceramics
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light
source for testing semiconducting photocatalytic materials
2011-06-13
Dimensional and geometrical product specifications and verification
* Geometrical product specifications (GPS) — Features utilized in specification and
verification
2011-06-08
Floor coverings
* Textile floor coverings — Determination of electrical resistance
2011-06-05
(Revision of ISO 10965:1998, ISO 10965:1998/Cor 1:1999)
JTC 1
Information technology
ISO/IEC FDIS
29168-2
* Information technology — Open systems interconnection — Part 2: Procedures for the
object identifier resolution system operational agency
ISO/IEC 144432:2010/FDAmd 1
* Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2:
Radio frequency power and signal interface — Amendment 1: Limits of electromagnetic
disturbance levels parasitically generated by the PICC
2011-06-05
ISO/IEC 144433:2011/FDAmd 1
* Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3:
Initialization and anticollision — Amendment 1: Electromagnetic disturbance handling
and single-size unique identifier
2011-06-05
ISO/IEC FDIS
24789-1
* Identification cards — Card service life — Part 1: Application profiles and requirements
ISO/IEC FDIS
23005-2
* Information technology — Media context and control — Part 2: Control information
ISO/IEC FDIS
23005-4
* Information technology — Media context and control — Part 4: Virtual world object
characteristics
2011-06-14
ISO/IEC FDIS
23005-5
* Information technology — Media context and control — Part 5: Data formats for
interaction devices
2011-06-14
ISO/IEC FDIS
23007-3
* Information technology — Rich media user interfaces — Part 3: Conformance and
reference software
2011-06-30
ISO/IEC FDIS
24800-2
* Information technology — JPSearch — Part 2: Registration, identification and
management of schema and ontology
2011-06-05
ISO/IEC FDIS
24800-5
* Information technology — JPSearch — Part 5: Data interchange format between image
repositories
2011-06-09
2011-06-16
2011-06-28
2011-06-14
Standards published
New International Standards published between 01 April and 30 April 2011
* Available in English only
** French version of standard previously published in English only
Price
group
TC 2
Fasteners
ISO 4017:2011
Hexagon head screws — Product grades A and B
E
ISO 4018:2011
Hexagon head screws — Product grade C
E
ISO 7048:2011
Cross-recessed cheese head screws
C
ISO 8676:2011
Hexagon head screws with metric fine pitch thread — Product grades A and B
F
ISO 2702:2011
Heat-treated steel tapping screws — Mechanical properties
C
TC 6
Paper, board and pulps
ISO 10376:2011
Pulps — Determination of mass fraction of fines
D
TC 8
Ships and marine technology
ISO 30006:2010
Ship recycling management systems — Diagrams to show the location of hazardous materials
onboard ships
E
Ships and marine technology — Measures to prevent asbestos emission and exposure during
ship recycling
H
ISO 30007:2010
ISO 23269-3:2011
* Ships and marine technology — Breathing apparatus for ships — Part 3: Self-contained
breathing apparatus (safety equipment) required by the IMO IBC and IGC Codes
TC 17
ISO 9444-2:2009
ISO 9328-1:2011
ISO 9328-2:2011
ISO 9328-3:2011
ISO 9328-4:2011
ISO 9328-5:2011
ISO 9328-6:2011
ISO 9328-7:2011
ISO 20805:2011
TC 20
ISO 11893:2011
B
Steel
* Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide
strip and sheet/plate
D
* Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General
requirements
H
* Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy
and alloy steels with specified elevated temperature properties
N
* Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable
fine grain steels, normalized
J
* Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy
steels with specified low temperature properties
G
* Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable
fine grain steels, thermomechanically rolled
H
* Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable
fine grain steels, quenched and tempered
G
* Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless
steels
T
* Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy
thickness for cold forming
E
Aircraft and space vehicles
* Space systems — Programme management — Project organization
D
ISO 27026:2011
* Space systems — Programme management — Breakdown of project management structures
F
TC 21
Equipment for fire protection and fire fighting
ISO 16852:2008
Flame arresters — Performance requirements, test methods and limits for use
T
TC 22
ISO 13043:2011
ISO 15031-5:2011
Road vehicles
* Road vehicles — Refrigerant systems used in mobile air conditioning systems (MAC) — Safety
requirements
* Road vehicles — Communication between vehicle and external equipment for emissions-related
diagnostics — Part 5: Emissions-related diagnostic services
L
XB
ISO 7401:2011
* Road vehicles — Lateral transient response test methods — Open-loop test methods
L
ISO
11838:1997/Amd
1:2011
* Motorcycle and motorcycle-rider kinematics — Vocabulary — Amendment 1
ISO
14722:1998/Amd
1:2011
* Moped and moped-rider kinematics — Vocabulary — Amendment 1
TC 23
XZ
XZ
Tractors and machinery for agriculture and forestry
* Tractors and machinery for agriculture and forestry — Serial control and communications data
network — Part 5: Network management
N
ISO 1178313:2011
Tractors and machinery for agriculture and forestry — Serial control and communications data
network — Part 13: File server
T
TC 28
Petroleum products and lubricants
ISO 20884:2011
Petroleum products — Determination of sulfur content of automotive fuels — Wavelengthdispersive X-ray fluorescence spectrometry
ISO 11783-5:2011
TC 29
Small tools
ISO 3860:2011
Bore cutters with key drive — Form milling cutters with constant profile
E
B
ISO 1174-1:2011
ISO 3315:2011
Assembly tools for screws and nuts — Driving squares — Part 1: Driving squares for hand
socket tools
B
Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket
wrenches — Dimensions and tests
D
TC 31
Tyres, rims and valves
ISO 4250-3:2011
Earth-mover tyres and rims — Part 3: Rims
G
TC 34
Food products
ISO 16050:2003
Foodstuffs — Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and
G2 in cereals, nuts and derived products — High-performance liquid chromatographic method
ISO 3720:2011
F
* Black tea — Definition and basic requirements
B
ISO 11287:2011
* Green tea — Definition and basic requirements
B
TC 35
Paints and varnishes
ISO 29601:2011
Paints and varnishes — Corrosion protection by protective paint systems — Assessment of
porosity in a dry film
D
TC 37
Terminology and other language and content resources
ISO 10241-1:2011
Terminological entries in standards — Part 1: General requirements and examples of
presentation
U
TC 44
Welding and allied processes
ISO 12153:2011
Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal
arc welding of nickel and nickel alloys — Classification
E
Welding consumables — Covered electrodes for manual metal arc welding of high-strength
steels — Classification
N
ISO 18275:2011
TC 46
ISO 16175-2:2011
Information and documentation
* Information and documentation — Principles and functional requirements for records in
electronic office environments — Part 2: Guidelines and functional requirements for digital
records management systems
TC 58
Gas cylinders
ISO 113631:2010/Cor 1:2011
Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1:
Specifications — Technical Corrigendum 1
TC 60
Gears
ISO/TR
22849:2011
R
Plastics
ISO 10927:2011
Plastics — Determination of the molecular mass and molecular mass distribution of polymer
species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDITOF-MS)
ISO 294-5:2011
TC 67
ISO/TS
12747:2011
TC 89
ISO 10033-1:2011
free
* Design recommendations for bevel gears
TC 61
ISO 11357-3:2011
V
* Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and
enthalpy of melting and crystallization
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5:
Preparation of standard specimens for investigating anisotropy
G
C
D
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
* Petroleum and natural gas industries — Pipeline transportation systems — Recommended
practice for pipeline life extension
L
Wood-based panels
* Laminated Veneer Lumber (LVL) — Bonding quality — Part 1: Test methods
J
ISO 10033-2:2011
* Laminated Veneer Lumber (LVL) — Bonding quality — Part 2: Requirements
B
TC 94
ISO 27065:2011
Personal safety -- Protective clothing and equipment
* Protective clothing — Performance requirements for protective clothing worn by operators
applying liquid pesticides
TC 106
Dentistry
ISO
21671:2006/Amd
1:2011
Dentistry — Rotary polishers — Amendment 1
TC 108
Mechanical vibration, shock and condition monitoring
ISO 18437-5:2011
ISO 17359:2011
J
XZ
* Mechanical vibration and shock — Characterization of the dynamic mechanical properties of
visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements
and finite element analysis
G
* Condition monitoring and diagnostics of machines — General guidelines
M
ISO 29821-1:2011
* Condition monitoring and diagnostics of machines — Ultrasound — Part 1: General guidelines
J
TC 115
Pumps
ISO
9905:1994/Amd
1:2011
Technical specifications for centrifugal pumps — Class I — Amendment 1
ISO
9908:1993/Amd
1:2011
Technical specifications for centrifugal pumps — Class III — Amendment 1
TC 118
Compressors and pneumatic tools, machines and equipment
ISO 2892710:2011
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10:
Percussive drills, hammers and breakers
TC 121
Anaesthetic and respiratory equipment
ISO 80601-212:2011
Medical electrical equipment — Part 2-12: Particular requirements for basic safety and essential
performance of critical care ventilators
TC 123
Plain bearings
ISO 4384-2:2011
XZ
XZ
N
W
* Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials
B
TC 131
ISO 16589-1:2011
ISO 16589-3:2011
Fluid power systems
* Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal
dimensions and tolerances
G
* Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 3: Storage,
handling and installation
E
ISO 16589-4:2011
ISO 16589-5:2011
* Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance
test procedures
H
* Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 5: Identification
of visual imperfections
G
TC 138
Plastics pipes, fittings and valves for the transport of fluids
ISO 112963:2009/Cor 1:2011
Plastics piping systems for renovation of underground non-pressure drainage and sewerage
networks — Part 3: Lining with close-fit pipes — Technical Corrigendum 1
ISO 210032:2008/Amd
1:2011
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes —
Amendment 1
TC 145
Graphical symbols
ISO 3864-1:2011
TC 146
ISO 25139:2011
TC 150
ISO 12891-1:2011
TC 164
ISO 1352:2011
* Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety
signs and safety markings
free
XZ
J
Air quality
* Stationary source emissions — Manual method for the determination of the methane
concentration using gas chromatography
J
Implants for surgery
* Implants for surgery — Retrieval and analysis of surgical implants — Part 1: Retrieval and
handling
L
Mechanical testing of metals
* Metallic materials — Torque-controlled fatigue testing
L
TC 172
Optics and photonics
ISO 14997:2011
Optics and photonics — Test methods for surface imperfections of optical elements
G
ISO 8038:2011
* Microscopes — Screw threads for objectives and related nosepieces
C
ISO 8255-1:2011
TC 184
* Microscopes — Cover glasses — Part 1: Dimensional tolerances, thickness and optical
properties
C
Automation systems and integration
ISO 10303203:2011
* Industrial automation systems and integration — Product data representation and exchange —
Part 203: Application protocol: Configuration controlled 3D design of mechanical parts and
assemblies
ISO 10303210:2011
* Industrial automation systems and integration — Product data representation and exchange —
Part 210: Application protocol: Electronic assembly, interconnect, and packaging design
XJ
XJ
TC 190
Soil quality
ISO 23753-1:2005
Soil quality — Determination of dehydrogenase activity in soils — Part 1: Method using
triphenyltetrazolium chloride (TTC)
C
Soil quality — Determination of dehydrogenase activity in soils — Part 2: Method using
iodotetrazolium chloride (INT)
C
ISO 23753-2:2005
TC 198
Sterilization of health care products
ISO 13408-2:2003
Aseptic processing of health care products — Part 2: Filtration
F
ISO 13408-3:2006
Aseptic processing of health care products — Part 3: Lyophilization
F
ISO 13408-4:2005
Aseptic processing of health care products — Part 4: Clean-in-place technologies
G
ISO 13408-6:2005
Aseptic processing of health care products — Part 6: Isolator systems
J
ISO 15883-6:2011
TC 204
Washer-disinfectors — Part 6: Requirements and tests for washer-disinfectors employing
thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment
D
Intelligent transport systems
ISO/TS 131401:2011
* Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to
ISO/TS 13141 — Part 1: Test suite structure and test purposes
S
ISO/TS 131431:2011
* Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to
ISO/TS 12813 — Part 1: Test suite structure and test purposes
V
ISO/TS 175753:2011
* Electronic fee collection — Application interface definition for autonomous systems — Part 3:
Context data
X
ISO/TS 175754:2011
* Electronic fee collection — Application interface definition for autonomous systems — Part 4:
Roaming
M
TC 207
Environmental management
ISO 14066:2011
Greenhouse gases — Competence requirements for greenhouse gas validation teams and
verification teams
M
TC 213
Dimensional and geometrical product specifications and verification
ISO 14253-2:2011
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and
measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS
measurement, in calibration of measuring equipment and in product verification
W
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and
measuring equipment — Part 3: Guidelines for achieving agreements on measurement
uncertainty statements
F
ISO 14253-3:2011
TC 215
Health informatics
ISO 18308:2011
Health informatics — Requirements for an electronic health record architecture
M
TMB
ISO/IEC 8007934:2011
JTC 1
Technical Management Board
* Explosive atmospheres — Part 34: Application of quality systems for equipment manufacture
V
Information technology
ISO/IEC 200001:2011
* Information technology — Service management — Part 1: Service management system
requirements
M
ISO/IEC 144433:2011
* Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3:
Initialization and anticollision
U
ISO/IEC
12862:2011
* Information technology — 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side)
DVD recordable disk for dual layer (DVD-R for DL)
ISO/IEC
29103:2011
* Information technology — Office equipment — Colour photo test pages for measurement of ink
cartridge yield for colour photo printing
ISO/IEC 138181:2007/Amd
3:2009/Cor 1:2011
* Information technology — Generic coding of moving pictures and associated audio information:
Systems — Part 1: — Amendment 3: Transport of scalable video over Rec. ITU-T H.222.0 |
ISO/IEC 13818-1 — Technical Corrigendum 1
ISO/IEC 138181:2007/Cor 3:2011
* Information technology — Generic coding of moving pictures and associated audio information:
Systems — Part 1: — Technical Corrigendum 3: Corrections concerning VBV buffer size,
semantics of splice_type and removal rate from transport buffer for ITU-T H.264 ISO/IEC
14496-10 advanced video coding
ISO/IEC 144965:2001/Amd
28:2011
* Information technology — Coding of audio-visual objects — Part 5: Reference software —
Amendment 28: Reference software for LASeR adaptation tools
ISO/IEC 230056:2011
* Information technology — Media context and control — Part 6: Common types and tools
ISO/IEC 197623:2008
ISO/IEC 132493:2011
XD
C
free
free
XZ
V
Information technology — Automatic identification and data capture (AIDC) techniques —
Harmonized vocabulary — Part 3: Radio frequency identification (RFID)
* Information technology — Database languages — SQL multimedia and application packages —
Part 3: Spatial
J
XL
Standards confirmed
The following International Standards are confimred for a five year period:
TC 2
Fasteners
ISO 885:2000
(reconfirmed)
ISO 6157-2:1995
(reconfirmed)
TC 6
Paper, board and pulps
ISO 17812:2007
TC 17
Steel
ISO 7788:1985
(reconfirmed)
ISO 6305-3:1983
(reconfirmed)
ISO 6305-4:1985
(reconfirmed)
TC 20
Aircraft and space vehicles
ISO 2315:1980
(reconfirmed)
ISO 8056-1:1985
(reconfirmed)
TC 22
Road vehicles
ISO 13837:2008
TC 28
Petroleum products and lubricants
ISO 6743-10:1989
(reconfirmed)
ISO 6743-11:1990
(reconfirmed)
ISO 6743-12:1989
(reconfirmed)
ISO 6743-14:1994
(reconfirmed)
ISO 6743-15:2007
ISO 8216-2:1986
(reconfirmed)
ISO 24254:2007
TC 29
Small tools
ISO 297:1988
(reconfirmed)
ISO 2336-2:2006
ISO 4875-1:2006
ISO 4875-2:2006
ISO 7388-1:2007
ISO 7388-2:2007
ISO 11054:2006
ISO 13399-1:2006
TC 34
Food products
ISO 6092:1980
(reconfirmed)
ISO 7586:1985
(reconfirmed)
ISO 9233-1:2007
ISO 9233-2:2007
ISO 5510:1984
(reconfirmed)
ISO 6490-1:1985
(reconfirmed)
ISO 6493:2000
(reconfirmed)
ISO 6866:1985
(reconfirmed)
ISO 6867:2000
(reconfirmed)
ISO 6869:2000
(reconfirmed)
ISO 7485:2000
(reconfirmed)
ISO 14181:2000
(reconfirmed)
ISO 14565:2000
(reconfirmed)
TC 35
Paints and varnishes
ISO 3251:2008
ISO 3681:1996
(reconfirmed)
ISO 6744-1:1999
(reconfirmed)
ISO 6744-2:1999
(reconfirmed)
ISO 6744-3:1999
(reconfirmed)
ISO 6744-4:1999
(reconfirmed)
ISO 11668:1997
(reconfirmed)
ISO 13885-1:2008
ISO 14446:1999
(reconfirmed)
ISO 15234:1999
(reconfirmed)
ISO 15715:2003
ISO 15880:2000
(reconfirmed)
ISO 16805:2003
TC 43
Acoustics
ISO 1680:1999
(reconfirmed)
ISO 3743-2:1994
(reconfirmed)
ISO 4869-3:2007
ISO 7196:1995
(reconfirmed)
ISO 8297:1994
(reconfirmed)
ISO 11203:1995
ISO 11205:2003
ISO 13475-1:1999
(reconfirmed)
TC 44
Welding and allied processes
ISO 9692-3:2000
(reconfirmed)
TC 51
Pallets for unit load method of materials handling
ISO 12777-1:1994
(reconfirmed)
TC 52
Light gauge metal containers
ISO 10193:2000
(reconfirmed)
ISO 90-3:2000
(reconfirmed)
ISO 10154:1991
(reconfirmed)
TC 54
Essential oils
ISO 17412:2007
ISO 19332:2007
TC 61
Plastics
ISO 4608:1998
ISO 8873-1:2006
TC 70
Internal combustion engines
ISO 4548-12:2000
(reconfirmed)
TC 72
Textile machinery and accessories
ISO 26243:2007
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO 11933-3:1998
(reconfirmed)
TC 92
Fire safety
ISO/TR 13387-1:1999
(reconfirmed)
ISO/TR 13387-2:1999
(reconfirmed)
ISO/TR 13387-3:1999
(reconfirmed)
ISO/TR 13387-4:1999
(reconfirmed)
ISO/TR 13387-5:1999
(reconfirmed)
ISO/TR 13387-6:1999
(reconfirmed)
ISO/TR 13387-7:1999
(reconfirmed)
ISO/TR 13387-8:1999
(reconfirmed)
TC 94
Personal safety -- Protective clothing and equipment
ISO 12127-2:2007
TC 106
Dentistry
ISO 1564:1995
(reconfirmed)
ISO 4823:2000
(reconfirmed)
ISO 7491:2000
(reconfirmed)
TC 108
Mechanical vibration, shock and condition monitoring
ISO 2017-2:2007
TC 121
Anaesthetic and respiratory equipment
ISO 7396-2:2007
TC 123
Plain bearings
ISO 3547-5:2007
ISO 3547-6:2007
ISO 3547-7:2007
TC 147
Water quality
ISO 9696:2007
ISO 10703:2007
ISO/TR 11905-2:1997
(reconfirmed)
ISO/TS 20612:2007
ISO 11348-1:2007
ISO 11348-2:2007
ISO 11348-3:2007
ISO 15088:2007
ISO 23893-1:2007
ISO/TS 23893-2:2007
TC 211
Geographic information/Geomatics
ISO 19105:2000
(reconfirmed)
ISO 19132:2007
TC 217
ISO 22716:2007
Cosmetics
JTC 1
Information technology
ISO/IEC 15051:2003
ISO/IEC 14598-2:2000
ISO/IEC 14496-11:2005
ISO/IEC 15444-9:2005
Standards withdrawn
Period from 01 April to 30 April 2011
TC 37
Terminology and other language and content resources
ISO 10241:1992
(replaced by ISO 10241-1:2011)
TC 108
Mechanical vibration, shock and condition monitoring
ISO 13380:2002
(replaced by ISO 17359:2011)
TC 118
Compressors and pneumatic tools, machines and equipment
ISO 8662-2:1992
(replaced by ISO 28927-10:2011)
ISO 8662-2:1992/Amd
1:1999
(replaced by ISO 28927-10:2011)
ISO 8662-3:1992
(replaced by ISO 28927-10:2011)
ISO 8662-3:1992/Amd
1:1999
(replaced by ISO 28927-10:2011)
ISO 8662-5:1992
(replaced by ISO 28927-10:2011)
ISO 8662-5:1992/Amd
1:1999
(replaced by ISO 28927-10:2011)
TC 172
Optics and photonics
ISO 8038-1:1997
(replaced by ISO 8038:2011)
ISO 8038-2:2001
(replaced by ISO 8038:2011)
TC 213
Dimensional and geometrical product specifications and verification
ISO/TS 14253-2:1999
(replaced by ISO 14253-2:2011)
ISO/TS 14253-3:2002
(replaced by ISO 14253-3:2011)
TC 215
Health informatics
ISO/TS 18308:2004
(replaced by ISO 18308:2011)
Meeting calendar
(update at 01 April 2011)
Meetings called for the month of March are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
May 2011
2-3
Paris
(France)
TC 155
Nickel and nickel alloys
2-4
The Hague
(Netherlands
)
TC 249
Traditional chinese medicine
2-6
Sydney
(Australia)
TC 46
Information and documentation
3-4
Paris
(France)
TC 44/SC 3
Welding and allied processes/Welding consumables
4-5
Geneva
(Switzerland)
TC 94
Personal safety -- Protective clothing and equipment
6
Atlanta
(USA)
TC 122/SC 4
Packaging/Packaging and Environment
6-13
Geneva
(Switzerland)
TC 94/SC 14
Personal safety -- Protective clothing and equipment/Fire-fighters' personal
equipment
9
Amsterdam
(Netherlands
)
TC 68/SC 2
Financial services/Security management and general banking operations
9
Amsterdam
(Netherlands
)
TC 68/SC 4
Financial services/Securities and related financial instruments
9
Berlin
(Germany)
TC 110/SC 1
Industrial trucks/General terminology
9-13
Berlin
(Germany)
TC 114
Horology
9-13
Adelaide
(Australia)
TC 241
Project Committee: Road-Traffic Safety Management System
10
Beijing
TC 195/SC 1
Building construction machinery and equipment/Machinery and equipment for
(China)
concrete work
11
Amsterdam
(Netherlands
)
TC 68/SC 7
Financial services/Core banking
11
Berlin
(Germany)
TC 110/SC 4
Industrial trucks/Rough-terrain trucks
11
Porto de
Galinhas
(Brazil)
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
12
Amsterdam
(Netherlands
)
TC 68
Financial services
12
Berlin
(Germany)
TC 110/SC 2
Industrial trucks/Safety of powered industrial trucks
12-13
Florida
(USA)
TC 184/SC 5
Automation systems and integration/Interoperability, integration, and architectures
for enterprise systems and automation applications
12-13
Vienna
(Austria)
TC 253
Project committee: Treated wastewater re-use for irrigation
13
Palisades
(USA)
TC 84
Devices for administration of medicinal products and intravascular catheters
13
Berlin
(Germany)
TC 110
Industrial trucks
13
Beijing
(China)
TC 195
Building construction machinery and equipment
16-17
Bratislava
(Slovakia)
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied
processes personnel
16-19
Troy (USA)
TC 22/SC 13
Road vehicles/Ergonomics applicable to road vehicles
16-19
Stockholm
(Sweden)
TC 156
Corrosion of metals and alloys
16-20
Kona, Hawaii
(USA)
JTC 1/SC 32
Information technology/Data management and interchange
16-20
Zurich
(Switzerland)
TC 39/SC 2
Machine tools/Test conditions for metal cutting machine tools
16-20
Beijing
(China)
TC 247
Fraud countermeasures and controls
16-20
Frankfurt
(Germany)
TC 248
Project committee: Sustainability criteria for bioenergy
16-22
Vienna
(Austria)
TC 224
Service activities relating to drinking water supply systems and wastewater systems
- Quality criteria of the service and performance indicators
18
Milan (Italy)
TC 131/SC 7
Fluid power systems/Sealing devices
18-19
Bratislava
(Slovakia)
TC 44/SC 10
Welding and allied processes/Unification of requirements in the field of metal
welding
18-19
Pau (France)
TC 67/SC 2
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries/Pipeline transportation systems
20
Troy (USA)
TC 22/SC 17
Road vehicles/Visibility
20
Viterbo (Italy)
TC 228
Tourism and related services
20
St.
Petersburg
(Russian
Federation)
TC 229
Nanotechnologies
22-27
Paris
(France)
JTC 1/SC 7
Information technology/Software and systems engineering
22-27
Portland,
Oregon
(USA)
TC 184/SC 4
Automation systems and integration/Industrial data
23-24
Stavanger
(Norway)
TC 67/SC 4
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries/Drilling and production equipment
23-27
London
(United
Kingdom)
COPOLCO
Committee on consumer policy
23-27
Chicago
(USA)
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
23-27
Salt Lake
City (USA)
TC 171
Document management applications
23-27
Kuopio
(Finland)
TC 215
Health informatics
23-28
Jeju (Korea,
Republic of)
TC 147
Water quality
24
Stockholm
(Sweden)
TC 29/SC 2
Small tools/High speed steel cutting tools and their attachments
24-26
St.
Petersburg
(Russian
Federation)
TC 67/SC 5
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries/Casing, tubing and drill pipe
25-27
Salt Lake
City (USA)
TC 171/SC 1
Document management applications/Quality
26
Berlin
(Germany)
TC 20/SC 14
Aircraft and space vehicles/Space systems and operations
26
Stockholm
(Sweden)
TC 29/SC 9
Small tools/Tools with cutting edges made of hard cutting materials
26-27
Vienna
(Austria)
JTC 1/SC 31
Information technology/Automatic identification and data capture techniques
26-27
Delft
(Netherlands
)
TC 211
Geographic information/Geomatics
27
La Plaine StDenis
(France)
TC 6
Paper, board and pulps
27
Shanghai
(China)
TC 8/SC 4
Ships and marine technology/Outfitting and deck machinery
27
Stockholm
(Sweden)
TC 29
Small tools
27
Salt Lake
City (USA)
TC 171/SC 2
Document management applications/Application issues
30
Pretoria
(South
Africa)
TC 96/SC 6
Cranes/Mobile cranes
30
Pretoria
(South
Africa)
TC 96/SC 7
Cranes/Tower cranes
TC 8/SC 2
Ships and marine technology/Marine environment protection
TC 223
Societal Security
TC 85/SC 5
Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle
TC 257
Energy savings
TC 96/SC 4
Cranes/Test methods
TC 96/SC 8
Cranes/Jib cranes
TC 96/SC 5
Cranes/Use, operation and maintenance
May-June 2011
30-1
Lisbon (Portugal)
30-3
Berlin (Germany)
31-2
London (United
Kingdom)
31-1
Beijing (China)
*
*
June 2011
1
Pretoria (South
Africa)
*
1
Pretoria (South
Africa)
2
Pretoria (South
Africa)
3
Pretoria (South
Africa)
TC 96/SC 3
Cranes/Selection of wire ropes
3
Pretoria (South
Africa)
TC 96/SC 9
Cranes/Bridge and gantry cranes
4
Pretoria (South
Africa)
TC 96
Cranes
4
Pretoria (South
Africa)
TC 96/SC 2
Cranes/Terminology
4
Pretoria (South
Africa)
TC 96/SC 10
Cranes/Design principles and requirements
4-8
Paris (France)
TC 85
Nuclear energy, nuclear technologies, and radiological protection
6
Vienna (Austria)
TC 145/SC 1
Graphical symbols/Public information symbols
6-7
Paris (France)
TC 22/SC 4
Road vehicles/Caravans and light trailers
6-10
Rochester (USA)
TC 42
Photography
7
Vienna (Austria)
TC 145/SC 2
Graphical symbols/Safety identification, signs, shapes, symbols and colours
7
Vienna (Austria)
TC 145/SC 3
Graphical symbols/Graphical symbols for use on equipment
7-10
Beijing (China)
TC 232
Learning services for non-formal education and training
8
Cannes (France)
TC 35/SC 12
Paints and varnishes/Preparation of steel substrates before application of paints and
related products
*
*
**
8
Cannes (France)
8
*
TC 35/SC 14
Paints and varnishes/Protective paint systems for steel structures
Vienna (Austria)
TC 145
Graphical symbols
8-9
Troy (USA)
TC 22/SC 11
Road vehicles/Safety glazing materials
9
Düsseldorf
(Germany)
TC 17/SC 15
Steel/Railway rails and their fasteners
9
Cannes (France)
TC 35/SC 9
Paints and varnishes/General test methods for paints and varnishes
9-10
Vienna (Austria)
TC 91
Surface active agents
10
Helsinki
(Finland)
JTC 1/SC 2
Information technology/Coded character sets
10
Cannes (France)
TC 35
Paints and varnishes
10
Vancouver
(Canada)
TC 192
Gas turbines
10-11
Seoul (Korea,
Republic of)
TC 37
Terminology and other language and content resources
13-17
Seoul (Korea,
Republic of)
TC 37
Terminology and other language and content resources
13-17
Vancouver
(Canada)
TC 121
Anaesthetic and respiratory equipment
13-17
Vancouver
(Canada)
TC 121/SC 1
Anaesthetic and respiratory equipment/Breathing attachments and anaesthetic
machines
13-17
Vancouver
(Canada)
TC 121/SC 2
Anaesthetic and respiratory equipment/Airways and related equipment
13-17
Vancouver
(Canada)
TC 121/SC 3
Anaesthetic and respiratory equipment/Lung ventilators and related equipment
13-17
Vancouver
(Canada)
TC 121/SC 6
Anaesthetic and respiratory equipment/Medical gas systems
14-15
Milan (Italy)
TC 17/SC 17
Steel/Steel wire rod and wire products
14-15
Geneva
(Switzerland)
TMB
Technical Management Board
14-16
Vancouver
(Canada)
TC 121/SC 4
Anaesthetic and respiratory equipment/Anaesthesia terminology
15
Stockholm
(Sweden)
TC 29/SC 5
Small tools/Grinding wheels and abrasives
16
London (United
Kingdom)
TC 51
Pallets for unit load method of materials handling
16-17
Sofia (Bulgaria)
TC 259
Project committee: Outsourcing
17
Brussels
(Belgium)
TC 4
Rolling bearings
20-21
Düsseldorf
(Germany)
TC 167
Steel and aluminium structures
20-21
Milan (Italy)
TC 252
Project committee: Natural gas fuelling stations for vehicles
*
*
20-22
Bournemouth
(United
Kingdom)
TC 34/SC 9
Food products/Microbiology
20-24
Hong Kong
(Hong Kong,
China)
*
TC 71
Concrete, reinforced concrete and pre-stressed concrete
21
Berlin (Germany)
*
TC 10/SC 1
Technical product documentation/Basic conventions
21
Berlin (Germany)
TC 10/SC 8
Technical product documentation/Construction documentation
21-24
Pretoria (South
Africa)
TC 137
Footwear sizing designations and marking systems
22
Berlin (Germany)
TC 10/SC 6
Technical product documentation/Mechanical engineering documentation
22
Berlin (Germany)
TC 10/SC 10
Technical product documentation/Process plant documentation and tpd-symbols
23
Berlin (Germany)
TC 10
Technical product documentation
24
San Diego (USA)
JTC 1/SC 6
Information technology/Telecommunications and information exchange between
systems
25
Reggio Emilia
(Italy)
TC 22/SC 25
Road vehicles/Vehicles using gaseous fuels
26-30
Hollywood,
Florida (USA)
TC 85/SC 6
Nuclear energy, nuclear technologies, and radiological protection/Reactor
technology
27-29
Winterthur
(Switzerland)
TC 21/SC 5
Equipment for fire protection and fire fighting/Fixed firefighting systems using water
27-29
Washington, D.C
(USA)
TC 258
Project, programme and portfolio management
27-30
Suresnes
(France)
TC 20/SC 1
Aircraft and space vehicles/Aerospace electrical requirements
28
Oslo (Norway)
TC 207/SC 2
Environmental management/Environmental auditing and related environmental
investigations
28-29
Düsseldorf
(Germany)
TC 17/SC 11
Steel/Steel castings
29
Berlin (Germany)
TC 44/SC 6
Welding and allied processes/Resistance welding and allied mechanical joining
29
Oslo (Norway)
TC 207/SC 1
Environmental management/Environmental management systems
29-30
London (United
Kingdom)
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
30
San Francisco
(USA)
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries/Drilling and completion fluids, and well cements
*
*
June-July 2011
21-1
Hangzhou
(China)
JTC 1/SC 28
Information technology/Office equipment
25-1
Oslo (Norway)
TC 207
Environmental management
25-1
Oslo (Norway)
TC 207/SC 3
Environmental management/Environmental labelling
27-1
Berlin (Germany)
TC 94/SC 6
Personal safety -- Protective clothing and equipment/Eye and face protection
30-1
Pisa (Italy)
TC 22/SC 3
Road vehicles/Electrical and electronic equipment
July 2011
1
Paris (France)
TC 188
Small craft
11-12
Kyoto (Japan)
JTC 1/SC 37
Information technology/Biometrics
12-15
Delft
(Netherlands)
REMCO
Committee on reference materials
17-22
Berlin (Germany)
*
TC 69
Applications of statistical methods
19-22
Pretoria (South
Africa)
*
TC 133
Sizing systems and designations for clothes
23
Turin (Italy)
JTC 1/SC 29
Information technology/Coding of audio, picture, multimedia and hypermedia
information
26-27
Berlin (Germany)
TC 261
Additive manufacturing
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental
data representation
*
JTC 1/SC 35
Information technology/User interfaces
August 2011
26
Rapid City (USA)
August-September 2011
29-2
Warsaw (Poland)
September 2011
12-14
Chicago (USA)
*
TC 205
Building environment design
12-16
Vienna (Austria)
*
TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to
mechanical vibration and shock
12-16
Florianopolis
(Brazil)
TC 150
Implants for surgery
12-16
Florianopolis
(Brazil)
TC 150/SC 1
Implants for surgery/Materials
13-14
Florianopolis
(Brazil)
TC 150/SC 5
Implants for surgery/Osteosynthesis and spinal devices
13-15
Moscow
(Russian
Federation)
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries
14-15
Helsinki
(Finland)
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
14-15
Chicago (USA)
TC 163
Thermal performance and energy use in the built environment
15
Florianopolis
(Brazil)
TC 150/SC 4
Implants for surgery/Bone and joint replacements
15-17
Brescia (Italy)
**
TC 201
Surface chemical analysis
15-22
Beijing (China)
**
TC 213
Dimensional and geometrical product specifications and verification
18-24
Phoenix (USA)
TC 106
Dentistry
18-24
Paris (France)
TC 164
Mechanical testing of metals
*
*
19
Chicago (USA)
*
TC 21/SC 3
Equipment for fire protection and fire fighting/Fire detection and alarm systems
19
Chicago (USA)
*
TC 21/SC 11
Equipment for fire protection and fire fighting/Smoke and heat control systems and
components
19-20
Paris (France)
*
TC 164/SC 3
Mechanical testing of metals/Hardness testing
19-20
New Delhi (India)
*
TMB
Technical Management Board
19-22
Paris (France)
*
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear
(T)
19-23
Seoul (Korea,
Republic of)
*
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
19-23
Bali (Indonesia)
*
TC 165
Timber structures
19-23
Adelaide
(Australia)
TC 190
Soil quality
19-23
Adelaide
(Australia)
*
TC 190/SC 1
Soil quality/Evaluation of criteria, terminology and codification
19-23
Adelaide
(Australia)
*
TC 190/SC 3
Soil quality/Chemical methods and soil characteristics
19-23
Adelaide
(Australia)
*
TC 190/SC 4
Soil quality/Biological methods
19-23
Adelaide
(Australia)
*
TC 190/SC 7
Soil quality/Soil and site assessment
20
Chicago (USA)
**
TC 21/SC 6
Equipment for fire protection and fire fighting/Foam and powder media and fixed
firefighting systems using foam and powder
20
Berlin (Germany)
*
TC 29/SC 8
Small tools/Tools for pressing and moulding
20-22
Paris (France)
*
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
20-23
Washington, D.C
(USA)
**
TC 172/SC 5
Optics and photonics/Microscopes and endoscopes
21
Chicago (USA)
TC 21/SC 2
Equipment for fire protection and fire fighting/Manually transportable fire
extinguishers
21
Vienna (Austria)
*
TC 146/SC 6
Air quality/Indoor air
21
Paris (France)
*
TC 164/SC 2
Mechanical testing of metals/Ductility testing
21-22
Chicago (USA)
*
TC 21/SC 8
Equipment for fire protection and fire fighting/Gaseous media and firefighting
systems using gas
21-23
New Delhi (India)
**
GA
General Assembly
21-23
Amsterdam
(Netherlands)
TC 225
Market, opinion and social research
22
Sao Paulo
(Brazil)
TC 142
Cleaning equipment for air and other gases
22-23
Las Vegas
(USA)
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
22-23
Paris (France)
*
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
23
Chicago (USA)
*
TC 21
Equipment for fire protection and fire fighting
*
24
New Delhi (India)
*
COUNCIL
Council
26-27
Geneva
(Switzerland)
*
TAG 8
Building
26-27
La Plaine StDenis (France)
TC 206
Fine ceramics
26-30
Kharkov
(Ukraine)
*
TC 218
Timber
Shanghai
(China)
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
Edinburgh
(United
Kingdom)
**
TC 24/SC 4
Particle characterization including sieving/Particle characterization
(Unknown)
**
TC 44/SC 9
Welding and allied processes/Health and safety
London (United
Kingdom)
**
TC 59/SC 2
Buildings and civil engineering works/Terminology and harmonization of languages
(France)
**
TC 59/SC 8
Buildings and civil engineering works/Sealants
(Malaysia)
**
TC 61/SC 4
Plastics/Burning behaviour
Sapporo (Japan)
**
TC 184/SC 1
Automation systems and integration/Physical device control
Mexico (Mexico)
**
TC 253
Project committee: Treated wastewater re-use for irrigation
3rd Quarter 2011
October 2011
3-7
Sydney
(Australia)
*
TC 89
Wood-based panels
3-7
London (United
Kingdom)
*
TC 146/SC 2
Air quality/Workplace atmospheres
6-7
Geneva
(Switzerland)
*
CASCO
Committee on conformity assessment
9-14
Beijing (China)
*
TC 27
Solid mineral fuels
10-14
(Unknown)
**
TC 25
Cast irons and pig irons
10-14
(Japan)
**
TC 34/SC 17
Food products/Management systems for food safety
10-14
Dublin (Ireland)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
10-14
Nanjing (China)
**
TC 193/SC 1
Natural gas/Analysis of natural gas
10-14
Tampa, Florida
(USA)
*
TC 204
Intelligent transport systems
10-14
Milan (Italy)
*
TC 209
Cleanrooms and associated controlled environments
10-14
Washington, D.C
(USA)
TC 251
Project committee: Asset management
11-12
Paris (France)
*
TC 17/SC 20
Steel/General technical delivery conditions, sampling and mechanical testing
methods
16-21
Suzhou (China)
*
TC 184/SC 4
Automation systems and integration/Industrial data
17
Beijing (China)
17
*
TC 111
Round steel link chains, chain slings, components and accessories
Beijing (China)
TC 111/SC 1
Round steel link chains, chain slings, components and accessories/Chains and
chain slings
17
Beijing (China)
TC 111/SC 3
Round steel link chains, chain slings, components and accessories/Components
and accessories
17-19
Tokyo (Japan)
*
TC 5/SC 2
Ferrous metal pipes and metallic fittings/Cast iron pipes, fittings and their joints
17-20
Yokohama
(Japan)
*
TC 45/SC 2
Rubber and rubber products/Testing and analysis
17-21
Berlin (Germany)
*
TC 2
Fasteners
17-21
Berlin (Germany)
*
TC 2/SC 7
Fasteners/Reference standards
17-21
Berlin (Germany)
*
TC 2/SC 11
Fasteners/Fasteners with metric external thread
17-21
Berlin (Germany)
*
TC 2/SC 12
Fasteners/Fasteners with metric internal thread
17-21
Berlin (Germany)
*
TC 2/SC 13
Fasteners/Fasteners with non-metric thread
17-21
Berlin (Germany)
*
TC 2/SC 14
Fasteners/Surface coatings
17-21
Yokohama
(Japan)
*
TC 45
Rubber and rubber products
18-20
London (United
Kingdom)
*
TC 202
Microbeam analysis
21
Melbourne
(Australia)
**
TC 92/SC 1
Fire safety/Fire initiation and growth
21
Ottawa (Canada)
**
TC 92/SC 4
Fire safety/Fire safety engineering
21
Courbevoie,
Paris (France)
*
TC 244
Industrial furnaces and associated processing equipment
24-28
Moscow
(Russian
Federation)
**
TC 178
Lifts, escalators and moving walks
24-28
Ottawa (Canada)
TC 181
Safety of toys
24-29
Beijing (China)
TC 176
Quality management and quality assurance
25
Osaka (Japan)
TC 38/SC 23
Textiles/Fibres and yarns
25
London (United
Kingdom)
*
TC 41/SC 3
Pulleys and belts (including veebelts)/Conveyor belts
25-27
Beltsville,
Maryland (USA)
*
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
25-28
Amsterdam
(Netherlands)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
for soil, waste and drainage (including land drainage)
26
Osaka (Japan)
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
26
London (United
Kingdom)
*
TC 41/SC 4
Pulleys and belts (including veebelts)/Synchronous belt drives
26
Amsterdam
(Netherlands)
*
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
for water supplies
26
Amsterdam
**
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
*
(Netherlands)
26-27
Alicante (Spain)
26-28
Troy (USA)
26-28
Nanjing (China)
27
Osaka (Japan)
27
London (United
Kingdom)
27
for the supply of gaseous fuels
TC 216
Footwear
*
TC 22
Road vehicles
*
TC 70
Internal combustion engines
TC 38
Textiles
*
TC 41/SC 1
Pulleys and belts (including veebelts)/Friction
Amsterdam
(Netherlands)
**
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
for industrial applications
27-28
(Europe)
**
TC 44
Welding and allied processes
28
London (United
Kingdom)
*
TC 41
Pulleys and belts (including veebelts)
31
Melbourne
(Australia)
*
JTC 1/SC 25
Information technology/Interconnection of information technology equipment
(Korea, Republic
of)
**
JTC 1/SC 17
Information technology/Cards and personal identification
London (United
Kingdom)
**
TC 59/SC 15
Buildings and civil engineering works/Performance criteria for single family attached
and detached dwellings
Paris (France)
**
TC 87
Cork
Ottawa (Canada)
**
TC 92/SC 3
Fire safety/Fire threat to people and environment
(Netherlands)
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
Amsterdam
(Netherlands)
**
TC 138/SC 5
Plastics pipes, fittings and valves for the transport of fluids/General properties of
pipes, fittings and valves of plastic materials and their accessories -- Test methods
and basic specifications
Vienna (Austria)
**
TC 146/SC 1
Air quality/Stationary source emissions
Berlin (Germany)
**
TC 160/SC 1
Glass in building/Product considerations
October-November 2011
31-3
London (United
Kingdom)
**
TC 46/SC 11
Information and documentation/Archives/records management
31-3
Bangkok
(Thailand)
*
TC 238
Solid biofuels
November 2011
2-4
Bangkok
(Thailand)
*
TC 123
Plain bearings
2-4
Bangkok
(Thailand)
*
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test
methods and testing conditions
2-4
Bangkok
(Thailand)
*
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
2-4
Bangkok
(Thailand)
*
TC 123/SC 5
Plain bearings/Quality analysis and assurance
2-4
Bangkok
(Thailand)
*
TC 123/SC 6
Plain bearings/Terms and common items
2-4
Bangkok
(Thailand)
*
TC 123/SC 7
Plain bearings/Special types of plain bearings
4
Cincinnati (USA)
*
TC 60
Gears
7-11
Osaka (Japan)
**
TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
7-12
(USA)
*
JTC 1
Information technology
10
Annapolis (USA)
*
TC 70/SC 7
Internal combustion engines/Tests for lubricating oil filters
10-11
Venice (Italy)
*
TC 227
Springs
13-18
Pretoria (South
Africa)
*
TC 211
Geographic information/Geomatics
14-16
Nagoya (Japan)
**
TC 189
Ceramic tile
14-18
(South Africa)
**
TC 229
Nanotechnologies
17
Munich
(Germany)
*
TC 44/SC 12
Welding and allied processes/Soldering materials
21-22
Berlin (Germany)
*
TC 44/SC 8
Welding and allied processes/Equipment for gas welding, cutting and allied
processes
21-25
Stellenbosch
(South Africa)
**
TC 98
Bases for design of structures
(Unknown)
**
TC 34/SC 7
Food products/Spices, culinary herbs and condiments
(Japan)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
Pau (France)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries/Drilling and completion fluids, and well cements
(Jamaica)
**
TC 93
Starch (including derivatives and by-products)
November-December 2011
26-1
(Israel)
**
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage
equipment and systems
December 2011
2
La Plaine StDenis (France)
**
TC 158
Analysis of gases
12-16
Sydney
(Australia)
*
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and
diagnostics of machines
(USA)
**
TC 30/SC 7
Measurement of fluid flow in closed conduits/Volume methods including water
meters
(Japan)
**
TC 172/SC 3
Optics and photonics/Optical materials and components
**
TC 130
Graphic technology
4th Quarter 2011
2nd Semester 2011
Tokyo (Japan)
Month unknown 2011
Kyoto (Japan)
**
TC 33
Refractories
**
TC 213
Dimensional and geometrical product specifications and verification
January 2012
Charlotte (USA)
February 2012
20-24
Kyoto (Japan)
*
JTC 1/SC 35
Information technology/User interfaces
22-23
Geneva
(Switzerland)
*
TMB
Technical Management Board
Paris (France)
**
TC 23/SC 2
Tractors and machinery for agriculture and forestry/Common tests
Florida (USA)
**
TC 115
Pumps
(USA)
**
TC 184/SC 2
Automation systems and integration/Robots and robotic devices
February-March 2012
25-5
Toulouse
(France)
**
TC 34/SC 12
Food products/Sensory analysis
28-2
Berlin (Germany)
**
TC 107
Metallic and other inorganic coatings
(Unknown)
**
TC 23/SC 19
Tractors and machinery for agriculture and forestry/Agricultural electronics
(China)
**
JTC 1/SC 6
Information technology/Telecommunications and information exchange between
systems
(Australia)
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
(Italy)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
March 2012
29
April 2012
16
Berlin (Germany)
**
TC 161
Control and protective devices for gas and/or oil burners and appliances
16-17
Senlis (France)
**
TC 117
Fans
16-20
Durban (South
Africa)
**
TC 135
Non-destructive testing
16-20
Melbourne
(Australia)
**
TC 204
Intelligent transport systems
Bern
(Switzerland)
**
TC 113
Hydrometry
Durban (South
Africa)
**
TC 135/SC 3
Non-destructive testing/Ultrasonic testing
Durban (South
Africa)
**
TC 135/SC 5
Non-destructive testing/Radiation methods
May 2012
7-11
Berlin (Germany)
**
TC 46
Information and documentation
10
Chicago (USA)
**
TC 68
Financial services
20-25
Jeju (Korea,
Republic of)
*
JTC 1/SC 7
Information technology/Software and systems engineering
21-25
(Unknown)
**
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
(Unknown)
**
TC 126
Tobacco and tobacco products
June 2012
6-7
Geneva
(Switzerland)
**
COPOLCO
Committee on consumer policy
13-14
Geneva
(Switzerland)
*
TMB
Technical Management Board
Calgary
(Canada)
**
TC 67/SC 3
Materials, equipment and offshore structures for petroleum, petrochemical and
natural gas industries/Drilling and completion fluids, and well cements
Brugge
(Belgium)
**
TC 86/SC 6
Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat
pumps
(Greece)
**
TC 92/SC 3
Fire safety/Fire threat to people and environment
(France)
**
TC 211
Geographic information/Geomatics
**
JTC 1/SC 35
Information technology/User interfaces
**
TC 142
Cleaning equipment for air and other gases
2nd Quarter 2012
August 2012
27-31
Montreal
(Canada)
September 2012
3-8
Zurich
(Switzerland)
19-21
San Diego (USA) **
GA
General Assembly
22
San Diego (USA) **
COUNCIL
Council
23-28
Rio de Janeiro
(Brazil)
**
TC 164
Mechanical testing of metals
24-28
Stockholm
(Sweden)
**
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
Zibo city (China)
**
TC 206
Fine ceramics
Cadiz (Spain)
**
TC 213
Dimensional and geometrical product specifications and verification
October 2012
8-12
(Unknown)
**
TC 92
Fire safety
24
Sydney
(Australia)
**
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
for the supply of gaseous fuels
(Unknown)
**
TC 34/SC 11
Food products/Animal and vegetable fats and oils
(Unknown)
**
TC 92/SC 2
Fire safety/Fire containment
(Brazil)
**
TC 127
Earth-moving machinery
**
TC 17/SC 1
Steel/Methods of determination of chemical composition
November 2012
Tokyo (Japan)
(USA)
**
TC 118/SC 6
Compressors and pneumatic tools, machines and equipment/Air compressors and
compressed air systems
**
TC 211
Geographic information/Geomatics
(Europe)
**
JTC 1/SC 24
Information technology/Computer graphics, image processing and environmental
data representation
Vienna (Austria)
**
REMCO
Committee on reference materials
Delft
(Netherlands)
**
TC 23/SC 6
Tractors and machinery for agriculture and forestry/Equipment for crop protection
(Unknown)
**
TC 34
Food products
Chicago (USA)
**
TC 68/SC 4
Financial services/Securities and related financial instruments
(South Africa)
**
TC 102
Iron ore and direct reduced iron
Sydney
(Australia)
**
TC 138
Plastics pipes, fittings and valves for the transport of fluids
Sydney
(Australia)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
for soil, waste and drainage (including land drainage)
(Unknown)
**
TC 146
Air quality
(Finland)
**
TC 190
Soil quality
(China)
**
TC 202
Microbeam analysis
(France)
**
TC 205
Building environment design
(Thailand)
**
TC 207
Environmental management
(Korea, Republic
of)
**
TC 228
Tourism and related services
**
JTC 1/SC 35
Information technology/User interfaces
**
JTC 1/SC 36
Information technology/Information technology for learning, education and training
**
TC 117
Fans
**
JTC 1/SC 38
Information technology/Distributed application platforms and services (DAPS)
**
TC 92/SC 3
Fire safety/Fire threat to people and environment
4th Quarter 2012
(Saudi Arabia)
Month unknown 2012
February-March 2013
25-1
(South America)
March 2013
(Kenya)
April 2013
10-11
Helsinki
(Finland)
May 2013
Ottawa (Canada)
2nd Quarter 2013
Moscow
(Russian
Federation)
August 2013
26-30
(South America)
**
JTC 1/SC 35
Information technology/User interfaces
(Korea, Republic
of)
**
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test
methods and testing conditions
(Korea, Republic
of)
**
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
(Korea, Republic
of)
**
TC 123/SC 5
Plain bearings/Quality analysis and assurance
(Korea, Republic
of)
**
TC 123/SC 6
Plain bearings/Terms and common items
(Korea, Republic
of)
**
TC 123/SC 7
Plain bearings/Special types of plain bearings
Tokyo (Japan)
**
TC 142
Cleaning equipment for air and other gases
**
TC 113
Hydrometry
(USA)
**
REMCO
Committee on reference materials
(Unknown)
**
TC 38/SC 1
Textiles/Tests for coloured textiles and colorants
(Korea, Republic
of)
**
TC 107
Metallic and other inorganic coatings
(Norway)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings
for soil, waste and drainage (including land drainage)
(Portugal)
**
TC 228
Tourism and related services
**
TC 142
Cleaning equipment for air and other gases
**
TC 142
Cleaning equipment for air and other gases
September 2013
October 2013
Mexico (Mexico)
Month unknown 2013
Month unknown 2014
(USA)
Month unknown 2015
London (United
Kingdom)