IEEE C802.16maint-08/353
Project
IEEE 802.16 Broadband Wireless Access Working Group <http://ieee802.org/16>
Title
Objects Missing in wmanIf2mBsNeighborBsOfdmaDcdTable
Date
Submitted
2008-12-17
Source(s)
Joey Chou
Intel
Re:
IEEE 802.16 Sponsor Ballot Recirculation, on P802.16Rev2/D8
E-mail: joey.chou@intel.com
Abstract
This contribution Fix Missing Objects in wmanIf2mBsNeighborBsOfdmaDcdTable.
Purpose
Adopt proposed remedy.
Notice
Release
Patent
Policy
This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It
represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for
discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material
contained herein.
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution,
and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name
any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole
discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The
contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.16.
The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
<http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and
<http://standards.ieee.org/guides/opman/sect6.html#6.3>.
Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and
<http://standards.ieee.org/board/pat>.
Objects missing in wmanIf2mBsNeighborBsOfdmaDcdTable
Joey Chou
Intel
1. Introduction
This contribution propose objects that are missing in wmanIf2mBsNeighborBsOfdmaDcdTable.
1
IEEE C802.16maint-08/353
2. Proposed Text
2.1
ASN.1 Code for wmanIf2TcMib
<insert>
WmanIf2TcCidDescriptor ::= TEXTUAL-CONVENTION
STATUS
current
DESCRIPTION
"a0-a4: number of reserved transport CIDs per MS
m0-m10: see definition in Table 557"
REFERENCE
"Table 574"
SYNTAX
BITS {a0(0),
a1(1),
a2(2),
a3(3),
a4(4),
m0(5),
m1(6),
m2(7),
m3(8),
m4(9),
m5(10),
m6(11),
m7(12),
m8(13),
m9(14),
m10(15)} <insert>
2.2
ASN.1 code for wmanIf2Mib
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32, Integer32, Counter32,
Counter64
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
MacAddress, RowStatus, TruthValue,
TimeStamp, DateAndTime
FROM SNMPv2-TC
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
WmanIf2TcBsIdType, WmanIf2TcChannelNumber,
WmanIf2TcCidType, WmanIf2TcGlobalSrvClass,
WmanIf2TcHarqAckDelay, WmanIf2TcMacVersion,
WmanIf2TcOfdmaCp, WmanIf2TcOfdmaFftSize,
WmanIf2TcOfdmaFrame, WmanIf2TcFrameOffset,
WmanIf2TcPwrCntlBits, WmanIf2TcFddDlGrpGap,
WmanIf2TcAasBeamSel, WmanIf2TcTxPowerReport,
WmanIf2TcFastFeedback, WmanIf2TcHarqAckRegion,
WmanIf2TcRangingRegion, WmanIf2TcSoundingRegion,
WmanIf2TcPermutationTyp, WmanIf2TcRssiCinrAvg,
WmanIf2TcMihCapability, WmanIf2TcHoSupportType,
WmanIf2TcSfDirection, WmanIf2TcArqDelvInOrder,
WmanIf2TcUlPhyModeId, WmanIf2TcCellType,
WmanIf2TcPwrCntlMode<insert>, WmanIf2TcCidDescriptor<insert>>
FROM WMAN-IF2-TC-MIB
2
IEEE C802.16maint-08/353
<delete>WmanIf2CidDescriptor ::= TEXTUAL-CONVENTION
STATUS
current
DESCRIPTION
"a0-a4: number of reserved transport CIDs per MS
m0-m10: see definition in Table 557"
REFERENCE
"Table 574"
SYNTAX
BITS {a0(0),
a1(1),
a2(2),
a3(3),
a4(4),
m0(5),
m1(6),
m2(7),
m3(8),
m4(9),
m5(10),
m6(11),
m7(12),
m8(13),
m9(14),
m10(15)} <delete>
WmanIf2BsOfdmaDownlinkChannelEntry ::= SEQUENCE
wmanIf2BsOfdmaFrameDurationCode
wmanIf2BsOfdmaHARQAckDelayULBurst
wmanIf2BsOfdmaHarqZonePermutation
wmanIf2BsOfdmaHMaxRetransmission
wmanIf2BsOfdmaRssiCinrAvgParameter
wmanIf2BsOfdmaDlAmcAlloPhyBandsBitmap
wmanIf2BsOfdmaHandoverSupported
wmanIf2BsOfdmaFddDlInterGroupGap
wmanIf2BsOfdmaFddPartitionChange
wmanIf2BsOfdmaThresholdAddBsDivSet
wmanIf2BsOfdmaThresholdDelBsDivSet
wmanIf2BsOfdmaAsrSlotLength
wmanIf2BsOfdmaAsrSwitchingPeriod
wmanIf2BsOfdmaTtgTtdOrHfddGroup1
wmanIf2BsOfdmaTtgHfddGroup2
wmanIf2BsOfdmaRtgTtdOrHfddGroup1
wmanIf2BsOfdmaRtgHfddGroup2
wmanIf2BsOfdmaTsuc1ActSubchannelBitmap
wmanIf2BsOfdmaTsuc2ActSubchannelBitmap
wmanIf2BsOfdmaCidDescriptor
{
WmanIf2TcOfdmaFrame,
WmanIf2TcHarqAckDelay,
WmanIf2TcPermutationTyp,
Integer32,
WmanIf2TcRssiCinrAvg,
OCTET STRING,
WmanIf2TcHoSupportType,
WmanIf2TcFddDlGrpGap,
Integer32,
Integer32,
Integer32,
Integer32,
Integer32,
Integer32,
Integer32,
Integer32,
Integer32,
OCTET STRING,
OCTET STRING,
WmanIf2<insert>Tc<insert>CidDescriptor}
wmanIf2BsOfdmaCidDescriptor OBJECT-TYPE
SYNTAX
WmanIf2<insert>Tc<insert>CidDescriptor
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"DCD TLV Connection identifier descriptor object
Most significant 11 bits = m (see Table 554)
Least significant 5 bits = a (number of reserved transport
CIDs per MS)"
::= { wmanIf2BsOfdmaDownlinkChannelEntry 20 }
2.3
ASN.1 code for wmanIf2mMib
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
3
IEEE C802.16maint-08/353
Unsigned32, Integer32, Counter64
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
MacAddress, RowStatus, TruthValue,
TimeStamp, DateAndTime
FROM SNMPv2-TC
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
WmanIf2TcBsIdType, WmanIf2TcChannelNumber,
WmanIf2TcCidType, WmanIf2TcCsType,
WmanIf2TcIpv6FlowLabel, WmanIf2TcPhsRuleVerify,
WmanIf2TcSchedulingType, WmanIf2TcGlobalSrvClass,
WmanIf2TcHarqAckDelay, WmanIf2TcMacVersion,
WmanIf2TcOfdmaCp, WmanIf2TcOfdmaFftSize,
WmanIf2TcOfdmaFrame, WmanIf2TcReqTxPolicy,
WmanIf2TcSfDirection, WmanIf2TcFrameOffset,
WmanIf2TcPwrCntlBits, WmanIf2TcFddDlGrpGap,
WmanIf2TcAasBeamSel, WmanIf2TcTxPowerReport,
WmanIf2TcFastFeedback, WmanIf2TcHarqAckRegion,
WmanIf2TcRangingRegion, WmanIf2TcSoundingRegion,
WmanIf2TcRssiCinrAvg, WmanIf2TcMihCapability,
WmanIf2TcHoSupportType, WmanIf2TcPermutationTyp,
WmanIf2TcArqBlockSize, WmanIf2TcSduType,
WmanIf2TcFsnType, WmanIf2TcMbsType,
WmanIf2TcSfState, WmanIf2TcClassifierMap,
WmanIf2TcUlPhyModeId, WmanIf2TcArqDelvInOrder,
WmanIf2TcCellType<insert>, WmanIf2TcCidDescriptor<insert>
FROM WMAN-IF2-TC-MIB
wmanIf2mBsNeighborBsOfdmaDcdTable OBJECT-TYPE
SYNTAX
SEQUENCE OF WmanIf2mBsNeighborBsOfdmaDcdEntry
MAX-ACCESS not-accessible
STATUS
current
DESCRIPTION
"This table contains the attributes of the DCD message for
the neighboring BSs."
REFERENCE
"Table 574"
::= { wmanIf2mBsNeighborAdv 4 }
wmanIf2mBsNeighborBsOfdmaDcdEntry OBJECT-TYPE
SYNTAX
WmanIf2mBsNeighborBsOfdmaDcdEntry
MAX-ACCESS not-accessible
STATUS
current
DESCRIPTION
"This table provides one row for each neighboring BS."
INDEX
{ wmanIf2mBsNeighborBsId }
::= { wmanIf2mBsNeighborBsOfdmaDcdTable 1 }
WmanIf2mBsNeighborBsOfdmaDcdEntry ::= SEQUENCE {
wmanIf2mBsOfdmaBsEIRP
Integer32,
wmanIf2mBsOfdmaChannelNumber
WmanIf2TcChannelNumber,
<delete>
wmanIf2mBsOfdmaTTG
Integer32,
wmanIf2mBsOfdmaRTG
Integer32, <delete>
wmanIf2mBsOfdmaMaxEirp
Integer32,
wmanIf2mBsOfdmaDownlinkCenterFreq
Unsigned32,
wmanIf2mBsOfdmaBsId
OCTET STRING,
wmanIf2mBsOfdmaMacVersion
WmanIf2TcMacVersion,
wmanIf2mBsOfdmaDlRadioResource
Integer32,
wmanIf2mBsOfdmaHARQAackDelayULBurst
WmanIf2TcHarqAckDelay,
wmanIf2mBsOfdmaHarqZonePermutation
WmanIf2TcPermutationTyp,
wmanIf2mBsOfdmaHMaxRetransmission
Integer32,
wmanIf2mBsOfdmaRssiCinrAvgParameter
WmanIf2TcRssiCinrAvg,
4
IEEE C802.16maint-08/353
wmanIf2mBsOfdmaDlAmcAlloPhyBandsBitmap
wmanIf2mBsOfdmaHandoverSupported
wmanIf2mBsOfdmaThresholdAddBsDivSet
wmanIf2mBsOfdmaThresholdDelBsDivSet
wmanIf2mBsOfdmaAsrSlotLength
wmanIf2mBsOfdmaAsrSwitchingPeriod
wmanIf2mBsOfdmaHysteresisMargin
wmanIf2mBsOfdmaTimeToTrigger
wmanIf2mBsOfdmaMihCapability
wmanIf2mBsOfdmaNspChangeCount
wmanIf2mBsOfdmaCellType
wmanIf2mBsOfdmaRestartCount
wmanIf2mBsOfdmaDcdConfigChangeCount
wmanIf2mBsOfdmaFddDlInterGroupGap
wmanIf2mBsOfdmaFddPartitionChange
OCTET STRING,
WmanIf2TcHoSupportType,
Integer32,
Integer32,
Integer32,
Integer32,
Integer32,
Integer32,
WmanIf2TcMihCapability,
Integer32,
WmanIf2TcCellType,
Integer32,
Integer32,
WmanIf2TcFddDlGrpGap,
Integer32,
wmanIf2mBsOfdmaPhyDlPowerControlMode
wmanIf2mBsOfdmaTtgTtdOrHfddGroup1
wmanIf2mBsOfdmaTtgHfddGroup2
wmanIf2mBsOfdmaRtgTtdOrHfddGroup1
wmanIf2mBsOfdmaRtgHfddGroup2
wmanIf2mBsOfdmaTsuc1ActSubchannelBitmap
wmanIf2mBsOfdmaTsuc2ActSubchannelBitmap
wmanIf2mBsOfdmaCidDescriptor
WmanIf2TcPwrCntlMode,
Integer32,
Integer32,
Integer32,
Integer32,
OCTET STRING,
OCTET STRING,
WmanIf2TcCidDescriptor<insert>
<insert>
}
wmanIf2mBsOfdmaBsEIRP OBJECT-TYPE
SYNTAX
Integer32 (-32768..32767)
UNITS
"dBm"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"The EIRP is the equivalent isotropic radiated power of the
base station, which is computed for a simple
single-antenna transmitter."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 1 }
wmanIf2mBsOfdmaChannelNumber OBJECT-TYPE
SYNTAX
WmanIf2TcChannelNumber
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Downlink channel number as defined in 8.5. Used for
license-exempt operation only."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 2 }
<delete>
wmanIf2mBsOfdmaTTG OBJECT-TYPE
SYNTAX
Integer32 (0..255)
UNITS
"PS"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Transmit / Receive Transition Gap. Used on TDD system only."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 3 }
wmanIf2mBsOfdmaRTG OBJECT-TYPE
SYNTAX
Integer32 (0..255)
UNITS
"PS"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Receive / Transmit Transition Gap. Used on TDD system only."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 4 }<delete>
5
IEEE C802.16maint-08/353
wmanIf2mBsOfdmaMaxEirp OBJECT-TYPE
SYNTAX
Integer32 (-32768..32767)
UNITS
"dBm"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Initial Ranging Max. equivalent isotropic received power
at BS Signed in units of 1 dBm."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 5 }
wmanIf2mBsOfdmaDownlinkCenterFreq OBJECT-TYPE
SYNTAX
Unsigned32
UNITS
"kHz"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Downlink center frequency (kHz)."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 6 }
wmanIf2mBsOfdmaBsId OBJECT-TYPE
SYNTAX
OCTET STRING (SIZE(6))
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Defines the encoding of BSID. The BSID is a 6 byte number
and follows the encoding rules of MacAddress textual
convention, i.e. as if it were transmitted
least-significant bit first. The value should be displayed
with 2 parts clearly separated by a colon e.g:
001DFF:00003A. The most significant part is representing
the Operator ID."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 7 }
wmanIf2mBsOfdmaMacVersion OBJECT-TYPE
SYNTAX
WmanIf2TcMacVersion
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"This parameter specifies the version of 802.16 to which
the message originator conforms."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 8 }
wmanIf2mBsOfdmaDlRadioResource OBJECT-TYPE
SYNTAX
Integer32 (0 .. 100)
UNITS
"%"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Indicates the average percentage ratio of non-assigned DL
radio resources to the total usable DL radio resources."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 9 }
wmanIf2mBsOfdmaHARQAackDelayULBurst OBJECT-TYPE
SYNTAX
WmanIf2TcHarqAckDelay
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"This object defines the OFDMA H-ARQ ACK delay for UL
burst."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 10 }
wmanIf2mBsOfdmaHarqZonePermutation OBJECT-TYPE
SYNTAX
WmanIf2TcPermutationTyp
6
IEEE C802.16maint-08/353
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Permutation type for broadcast region in HARQ zone"
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 11 }
wmanIf2mBsOfdmaHMaxRetransmission OBJECT-TYPE
SYNTAX
Integer32 (0..255)
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Maximum number of retransmission in DL HARQ."
DEFVAL
{ 4 }
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 12 }
wmanIf2mBsOfdmaRssiCinrAvgParameter OBJECT-TYPE
SYNTAX
WmanIf2TcRssiCinrAvg
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Default RSSI and CINR averaging parameter TLV."
DEFVAL
{ 51 }
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 13 }
wmanIf2mBsOfdmaDlAmcAlloPhyBandsBitmap OBJECT-TYPE
SYNTAX
OCTET STRING (SIZE (6))
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"A bitmap describing the physical bands allocated to the
segment in the DL, when allocating AMC subchannels
through the HARQ MAP, or through the Normal MAP, or for
Band-AMC CINR reports, or using the optional AMC
permutation (see 8.4.6.3). The LSB of the first byte
shall correspond to band 0. For any bit that is not set,
the corresponding band shall not be used by the SS on
that segment. When this TLV is not present, BS may
allocate any physical bands to an SS."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 14 }
wmanIf2mBsOfdmaHandoverSupported OBJECT-TYPE
SYNTAX
WmanIf2TcHoSupportType
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Indicates the types of handover supported.
Bit #0 = HO
Bit #1 = MDHO
Bit #2 = FBSS HO."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 15 }
wmanIf2mBsOfdmaThresholdAddBsDivSet OBJECT-TYPE
SYNTAX
Integer32 (0..255)
UNITS
"dB"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Threshold used by the MS to add a neighbor BS to the
diversity set. When the CINR of a neighbor BS is higher
than H_Add_Threshold, the MS should send MOB_MSHO-REQ to
request adding this neighbor BS to the diversity set.
This threshold is used for the MS that is performing
MDHO/FBSS HO. If the BS does not support FBSS HO/MDHO,
this value is not set."
7
IEEE C802.16maint-08/353
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 16 }
wmanIf2mBsOfdmaThresholdDelBsDivSet OBJECT-TYPE
SYNTAX
Integer32 (0..255)
UNITS
"dB"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Threshold used by the MS to delete a neighbor BS to the
diversity set. When the CINR of a neighbor BS is lower
than H_Add_Threshold, the MS should send MOB_MSHO-REQ to
request dropping this neighbor BS to the diversity set.
This threshold is used for the MS that is performing
MDHO/FBSS HO. If the BS does not support FBSS HO/MDHO,
this value is not set."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 17 }
wmanIf2mBsOfdmaAsrSlotLength OBJECT-TYPE
SYNTAX
Integer32 (0..15)
UNITS
"Frames"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Bit 0..3 of ASR Slot Length and Switching Period. For FBSS
operation, the time axis is slotted by an ASR (Anchor
Switch Reporting) slot that is
wmanIf2mBsOfdmaAsrSlotLength frame long."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 18 }
wmanIf2mBsOfdmaAsrSwitchingPeriod OBJECT-TYPE
SYNTAX
Integer32 (0..15)
UNITS
"ASR slots"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Bit 0..3 of ASR Slot Length and Switching Period.
A switching period is introduced whose duration is equals
to wmanIf2mBsOfdmaAsrSwitchingPeriod ASR slots that should
be long enough such that certain process (e.g., HARQ
transmission, backhaul context transfer) can be completed
at the current anchor BS before the MS switches to the new
anchor BS."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 19 }
wmanIf2mBsOfdmaHysteresisMargin OBJECT-TYPE
SYNTAX
Integer32 (0..57)
UNITS
"dB"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"When the CINR of a neighbor BS is larger than the sum of
the CINR of the current serving BS and
wmanIf2mBsOfdmaHysteresisMargin for the time-to-trigger
duration, then the neighbor BS is included in the list
of possible target BSs in MOB_MSHO-REQ."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 20 }
wmanIf2mBsOfdmaTimeToTrigger OBJECT-TYPE
SYNTAX
Integer32
UNITS
"milliseconds"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Indicates the time duration for MS decides to select a
8
IEEE C802.16maint-08/353
neighbor BS as a possible target BS. It is
for HHO."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 21 }
applicable only
wmanIf2mBsOfdmaMihCapability OBJECT-TYPE
SYNTAX
WmanIf2TcMihCapability
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"This object indicates the IEEE 802.21 Media Independent
Handover Services capability of the BS."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 22 }
wmanIf2mBsOfdmaNspChangeCount OBJECT-TYPE
SYNTAX
Integer32 (0 .. 15)
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"This object tracks the change of NSP List and/or Verbose
NSP Name List. Inclusion of the NSP Change Count is only
required if the base station transmits NSP List TLV in any
SBC-RSP or SII-ADV message."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 23 }
wmanIf2mBsOfdmaCellType OBJECT-TYPE
SYNTAX
WmanIf2TcCellType
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"This object defines BS classes to be used by the MS in the
network for cell selection and re-selection."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 24 }
wmanIf2mBsOfdmaRestartCount OBJECT-TYPE
SYNTAX
Integer32 (0..255)
MAX-ACCESS read-only
STATUS
current
DESCRIPTION
"The value is incremented by one whenever BS restarts. The
value rolls over from 0 to 255."
REFERENCE
"Subclause 6.3.9.11"
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 25 }
wmanIf2mBsOfdmaDcdConfigChangeCount OBJECT-TYPE
SYNTAX
Integer32
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"This represents the neighbor BS current DCD configuration
change count."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 26 }
wmanIf2mBsOfdmaFddDlInterGroupGap OBJECT-TYPE
SYNTAX
WmanIf2TcFddDlGrpGap
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Indicates the location and the size of inter-group gap
location."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 27 }
wmanIf2mBsOfdmaFddPartitionChange OBJECT-TYPE
SYNTAX
Integer32 (0 .. 255)
9
IEEE C802.16maint-08/353
UNITS
"Frames"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Indicate minimum number of frames (excluding current frame)
before next possible change."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 28 }
<insert>
wmanIf2mBsOfdmaPhyDlPowerControlMode OBJECT-TYPE
SYNTAX
WmanIf2TcPwrCntlMode
MAX-ACCESS read-only
STATUS
current
DESCRIPTION
"This object defines the Power control mode change parameter
that BS will send to MS in PCM_RSP message in OFDM and
OFDMA PHY modes."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 29 }
wmanIf2mBsOfdmaTtgTtdOrHfddGroup1 OBJECT-TYPE
SYNTAX
Integer32 (0 .. 65535)
UNITS
"PS"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Transmit / Receive Transition Gap for TDD or HFDD group 1."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 30 }
wmanIf2mBsOfdmaTtgHfddGroup2 OBJECT-TYPE
SYNTAX
Integer32 (0 .. 65535)
UNITS
"PS"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Transmit / Receive Transition Gap for HFDD group 2. For TDD
, '0' should be returned, when reading this object."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 31 }
wmanIf2mBsOfdmaRtgTtdOrHfddGroup1 OBJECT-TYPE
SYNTAX
Integer32 (0 .. 255)
UNITS
"PS"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Receive / Transmit Transition Gap for TDD or HFDD group 1."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 32 }
wmanIf2mBsOfdmaRtgHfddGroup2 OBJECT-TYPE
SYNTAX
Integer32 (0 .. 255)
UNITS
"PS"
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"Receive / Transmit Transition Gap for HFDD group 2. For TDD
, '0' should be returned, when reading this object."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 33 }
wmanIf2mBsOfdmaTsuc1ActSubchannelBitmap OBJECT-TYPE
SYNTAX
OCTET STRING (SIZE (9))
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"This is a bitmap describing the subchannels allocated to
the segment in the DL, when using the TUSC1 permutation
10
IEEE C802.16maint-08/353
(see 8.4.6.1.2.4). The LSB of the least significant byte
shall correspond to subchannel 0. For any bit that is not
set, the MS on that segment shall not use the corresponding
subchannel. The active subchannels are renumbered
consecutively starting from 0."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 34 }
wmanIf2mBsOfdmaTsuc2ActSubchannelBitmap OBJECT-TYPE
SYNTAX
OCTET STRING (SIZE (9))
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"This is a bitmap describing the subchannels allocated to
the segment in the DL, when using the TUSC2 permutation
(see 8.4.6.1.2.5). The LSB of the least significant byte
shall correspond to subchannel 0. For any bit that is not
set, the MS on that segment shall not use the
corresponding subchannel. The active subchannels are
renumbered consecutively starting from 0."
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 35 }
wmanIf2mBsOfdmaCidDescriptor OBJECT-TYPE
SYNTAX
WmanIf2TcCidDescriptor
MAX-ACCESS read-write
STATUS
current
DESCRIPTION
"DCD TLV Connection identifier descriptor object
Most significant 11 bits = m (see Table 554)
Least significant 5 bits = a (number of reserved transport
CIDs per MS)"
::= { wmanIf2mBsNeighborBsOfdmaDcdEntry 36 }<insert>
11