Doc No
A1
A 100
A 1000
A 101
A 102
A 105/A 105M
A 106
A 108
A 109/A 109M
A 111
A 116
A 121
A 131/A 131M
A 135
A 123/A 123M
A 125
A 126
A 128/A 128M
A 132
A 134
A 139
A 143
A 144
A 146
A 159
A 1019/A 1019M
A 176
A 183
Title
Standard Specification for Carbon Steel Tee Rails
Ferrosilicon
Steel Wire, Carbon and Alloy Specially Spring Quality
Ferrochromium
Ferrovanadium
Standard Specification for Carbon Steel Forgings for
Piping Applications
Seamless Carbon Steel Pipe for High-Temperature
Service
Steel Bars, Carbon, Cold-Finished, Standard Quality
Standard Specification for Steel, Strip, Carbon (0.25
Maximum Percent), Cold-Rolled
Specification for Zinc-Coated (Galvanized) "Iron"
Telephone and Telegraph Line Wire
Zinc-Coated (Galvanized) Steel Woven Wire Fence
Fabric
Metallic-Coated Carbon Steel Barbed Wire
Structural Steel for Ships
Standard Specification for Electric-Resistance-Welded
Steel Pipe
Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel
Products
Steel Springs, Helical, Heat-Treated
Standard Specification for Gray Iron Castings for
Valves, Flanges, and Pipe Fittings
Steel Castings, Austenitic Manganese
Ferromolybdenum
Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS
16 and Over)
Specification for Electric-Fusion (Arc)-Welded Steel
Pipe (NPS 4 and Over)
Safeguarding Against Embrittlement of Hot-Dip
Galvanized Structural Steel Products and Procedure for
Detecting Embrittlement
Ferrotungsten
Molybdenum Oxide Products
Standard Specification for Automotive Gray Iron
Castings
Standard Specification for Closed Rib Steel Pipe with
Diameter of 36 in. [900 mm] or Less, Polymer Precoated
for Sewers and Drains
Stainless and Heat-Resisting Chromium Steel Plate,
Sheet, and Strip
Carbon Steel Track Bolts and Nuts
A 148/A 148M
A 153/A 153M
A 167
A 178/A 178M
A 179/A 179M
A 181/A 181M
A 182/A 182M
A 184/A 184M
A 185
A 192/A 192M
A 197/A 197M
A2
A 203/A 203M
A 193/A 193M
A 194/A 194M
A 202/A 202M
A 204/A 204M
A 209/A 209M
A 20/A 20M
A 21
A 210/A 210M
A 213/A 213M
A 217/A 217M
Standard Specification for Steel Castings, High
Strength, for Structural Purposes
Zinc Coating (Hot-Dip) on Iron and Steel Hardware
Stainless and Heat-Resisting Chromium-Nickel Steel
Plate, Sheet, and Strip
Standard Specification for Electric-Resistance-Welded
Carbon Steel and Carbon-Manganese Steel Boiler and
Superheater Tubes
Seamless Cold-Drawn Low-Carbon Steel HeatExchanger and Condenser Tubes
Standard Specification for Carbon Steel Forgings, for
General-Purpose Piping
Standard Specification for Forged or Rolled Alloy-Steel
Pipe Flanges, Forged Fittings, and Valves and Parts for
High-Temperature Service
Standard Specification for Welded Deformed Steel Bar
Mats for Concrete Reinforcement
Steel Welded Wire Fabric, Plain, for Concrete
Reinforcement
Seamless Carbon Steel Boiler Tubes for High-Pressure
Service
Specification for Cupola Malleable Iron
Carbon Steel Girder Rails of Plain, Grooved, and Guard
Types
Pressure Vessel Plates, Alloy Steel, Nickel
Standard Specification for Alloy-Steel and Stainless
Steel Bolting Materials for High-Temperature Service
Standard Specification for Carbon and Alloy Steel Nuts
for Bolts for High Pressure or High Temperature
Service, or Both
Pressure Vessel Plates, Alloy Steel, ChromiumManganese-Silicon
Pressure Vessel Plates, Alloy Steel, Molybdenum
Seamless Carbon-Molybdenum Alloy-Steel Boiler and
Superheater Tubes
Standard Specification for General Requirements for
Steel Plates for Pressure Vessels
Carbon Steel Axles, Non-Heat-Treated and HeatTreated, for Railway Use
Seamless Medium-Carbon Steel Boiler and Superheater
Tubes
Specification for Seamless Ferritic and Austenitic AlloySteel Boiler, Superheater, and Heat-Exchanger Tubes
Standard Specification for Steel Castings, Martensitic
Stainless and Alloy, for Pressure-Containing Parts,
Suitable for High-Temperature Service
A 227/A 227M
A 229/A 229M
A 225/A 225M
A 214/A 214M
A 216/A 216M
A 228/A 228M
A 230/A 230M
A 231/A 231M
A 232/A 232M
A 234/A 234M
A 239
A 240/A 240M
A 242/A 242M
A 247
A 249/A 249M
A 275/A 275M
A 276
A 283/A 283M
A 250/A 250M
A 252
A 254
A 255
A 262
A 263
A 265
A 268/A 268M
Steel Wire, Cold Drawn for Mechanical Springs
Steel Wire, Oil-Tempered for Mechanical Springs
Pressure Vessel Plates, Alloy Steel, ManganeseVanadium-Nickel
Electric-Resistance-Welded Carbon Steel HeatExchanger and Condenser Tubes
Steel Castings, Carbon, Suitable for Fusion Welding, for
High-Temperature Service
Steel Wire, Music Spring Quality
Steel Wire, Oil-Tempered Carbon Valve Spring Quality
Chromium-Vanadium Alloy Steel Spring Wire
Chromium-Vanadium Alloy Steel Valve Spring Quality
Wire
Standard Specification for Piping Fittings of Wrought
Carbon Steel and Alloy Steel for Moderate and High
Temperature Service
Standard Practice for Locating the Thinnest Spot in a
Zinc (Galvanized) Coating on Iron or Steel Articles
Standard Specification for Heat-Resisting Chromium
and Chromium-Nickel Stainless Steel Plate, Sheet, and
Strip for Pressure Vessels
Standard Specification for High-Strength Low-Alloy
Structural Steel
Evaluating the Microstructure of Graphite in Iron
Castings
Welded Austenitic Steel Boiler, Superheater, HeatExchanger, and Condenser Tubes
Magnetic Particle Examination of Steel Forgings
Standard Specification for Stainless Steel Bars and
Shapes
Low and Intermediate Tensile Strength Carbon Steel
Plates
Standard Specification for Electric-Resistance-Welded
Ferritic Alloy-Steel Boiler and Superheater Tubes
Welded and Seamless Steel Pipe Piles
Copper-Brazed SteelTubing
Determining Hardenability of Steel
Detecting Susceptibility to Intergranular Attack in
Austenitic Stainless Steels
Corrosion-Resisting Chromium Steel-Clad Plate, Sheet,
and Strip
Nickel and Nickel-Base Alloy-Clad Steel Plate
Standard Specification for Seamless and Welded Ferritic
and Martensitic Stainless Steel Tubing for General
Service
A 308
A 31
A 264
A 266/A 266M
A 314
A 269
A 270
A 278
A 27/A 27M
A 285/A 285M
A 288
A 289/A 289M
A 290
A 291
A 295
A 299/A 299M
A 307
A 297/A 297M
A 29/A 29M
A3
A 302/A 302M
A 311/A 311M
A 312/A 312M
A 313/A 313M
A 319
Steel Sheet, Terne (Lead-Tin Alloy) Coated by the HotDip Process
Specification for Steel Rivets and Bars for Rivets,
Pressure Vessels
Stainless Chromium-Nickel Steel-Clad Plate, Sheet, and
Strip
Carbon Steel Forgings for Pressure Vessels Components
Stainless Steel Billets and Bars for Forging
Standard Specification for Seamless and Welded
Austenitic Stainless Steel Tubing for General Service
Standard Specification for Seamless and Welded
Austenitic Stainless Steel Sanitary Tubing
Gray Iron Castings for Pressure-Containing Parts for
Temperature Up to 650°F
Steel Castings, Carbon, for General Application
Standard Specification for Pressure Vessel Plates,
Carbon Steel, Low- and Intermediate-Tensile Strength
Carbon and Alloy Steel Forgings for Magnetic
Retaining Rings for Turbine Generators
Alloy Steel Forgings for Nonmagnetic Retaining Rings
for Generators
Carbon and Alloy Steel Forgings for Rings for
Reduction Gears
Steel Forgings, Carbon and Alloy, for Pinions, Gears
and Shafts for Reduction Gears
High-Carbon Anti-Friction Bearing Steel
Pressure Vessel Plates, Carbon Steel, ManganeseSilicon
Specification for Carbon Steel Bolts and Studs, 60 000
PSI Tensile Strength
Steel Castings, Iron-Chromium and Iron-ChromiumNickel, Heat Resistant, for General Application
Steel Bars, Carbon and Alloy, Hot-Wrought and ColdFinished, General Requirements for
Standard Specification for Steel Joint Bars, Low,
Medium, and High Carbon (Non-Heat-Treated)
Pressure Vessel Plates, Alloy Steel, ManganeseMolybdenum and Manganese-Molybdenum-Nickel
Standard Specification for Cold-Drawn, Stress-Relieved
Carbon Steel Bars Subject to Mechanical Property
Requirements
Standard Specification for Seamless and Welded
Austenitic Stainless Steel Pipes
Stainless Steel Spring Wire
Standard Specification for Gray Iron Castings for
Elevated Temperatures for Non-Pressure Containing
A 322
A 325M
A 278M
A 304
A 309
A 328/A 328M
A 320/A 320M
A 321
A 323
A 324
A 325
A 327
A 327M
A 331
A 333/A 333M
A 334/A 334M
A 336/A 336M
A 368
A 36/A 36M
A 377
A 391/A 391M
A 338
A 340
A 341/A 341M
A 342
A 345
A 34/A 34M
A 343
Parts
Standard Specification for Steel Bars, Alloy, Standard
Grades
Specification for High-Strength Bolts for Structural
Steel Joints [Metric]
Gray Iron Castings for Pressure-Containing Parts for
Temeperature Up to 350°C
Steel Bars, Alloy, Subject to End-Quench Hardenability
Requirements
Weight and Composition of Coating on Terne Sheet by
the Triple-Spot Test
Steel Sheet Piling
Standard Specification for Alloy/Steel Bolting Materials
for Low-Temperature Service
Steel Bars, Carbon, Quenched and Tempered
Ferroboron
Ferrotitanium
Structural Bolts, Steel, Heat Treated, 120/105 ksi
Minimum Tensile Strength
Impact Testing of Cast Irons
Impact Testing of Cast Irons (Metric)
Standard Specification for Steel Bars, Alloy, ColdFinished
Seamless and Welded Steel Pipe for Low-Temperature
Service
Seamless and Welded Carbon and Alloy-Steel Tubes for
Low-Temperature Service
Specification for Alloy Steel Forgings for Pressure and
High-Temperature Parts
Standard Specification for Stainless Steel Wire Strand
Standard Specification for Carbon Structural Steel
Index of Specifications for Ductile-Iron Pressure Pipe
80 Alloy Steel Chain
Malleable Iron Flanges, Pipe Fittings, and Valve Parts
for Railroad, Marine, and Other Heavy Duty Service at
Temperatures Up to 650°F (345°C)
Symbols and Definitions Relating to Magnetic Testing
Standard Test Method for Direct Current Magnetic
Properties of Materials Using D-C Permeameters and
the Ballistic Test Methods
Permeability of Feebly Magnetic Materials
Flat-Rolled Electrical Steels for Magnetic Applications
Sampling and Procurement Testing of Magnetic
Materials
Alternating-Current Magnetic Properties of Materials at
A 348/A 348M
A 350/A 350M
A 394
A 421/A 421M
A 472
A 351/A 351M
A 352/A 352M
A 353/A 353M
A 354
A 355
A 356/A 356M
A 358/A 358M
A 363
A 366/A 366M
A 367
A 473
A 496
A 369/A 369M
A 370
A 370
A 370
A 370
Power Frequencies Using Wattmeter-AmmeterVoltmeter Method and 25-cm Epstein Test Frame
Standard Test Method for Alternating Current Magnetic
Properties of Materials Using the Wattmeter-AmmeterVoltmeter Method, 100 to 10 000 Hz and 25-cm Epstein
Frame
Standard Specification for Carbon and Low-Alloy Steel
Forgings, Requiring Notch Toughness Testing for
Piping Components
Specification for Steel Transmission Tower Bolts, ZincCoated and Bare
Uncoated Stress-Relieved Steel Wire for Prestressed
Concrete
Heat Stability of Steam Turbine Shafts and Rotor
Forgings
Castings, Austenitic-Ferritic (Duplex), for PressureContaining Parts
Steel Castings, Ferritic and Martensitic, for PressureContaining Parts, Suitable for Low-Temperature Service
Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel,
Double-Normalized and Tempered
Standard Specification for Quenched and Tempered
Alloy Steel Bolts, Studs, and Other Externally Threaded
Fasteners
Steel Bars, Alloy, for Nitriding
Steel Castings, Carbon, Low Alloy, and Stainless Steel,
Heavy-Walled for Steam Turbines
Standard Specification for Electric-Fusion-Welded
Austenitic Chromium-Nickel Alloy Steel Pipe for HighTemperature Service
Zinc-Coated (Galvanized) Steel Overhead Ground Wire
Strand
Commercial Steel (CS) Sheet, Carbon, (0.15 Maximum
Percent) Cold-Rolled
Chill Testing of Cast Iron
Standard Specification for Stainless Steel Forgings
Standard Specification for Steel Wire, Deformed, for
Concrete Reinforcement
Standard Specification for Carbon and Ferritic Alloy
Steel Forged and Bored Pipe for High-Temperature
Service
Standard Test Methods and Definitions for Mechanical
Testing of Steel Products
Mechanical Testing of Steel Products
Mechanical Testing of Steel Products
Mechanical Testing of Steel Products
A 370
A 372/A 372M
A 376/A 376M
A 380
A 381
A 499
B 211
B 396
A 384
A 385
A 387/A 387M
A 388/A 388M
A 389/A 389M
A 390
A 392
A 400
A 401/A 401M
A 407
A 411
A 414/A 414M
A 416/A 416M
A 403/A 403M
A 409/A 409M
A 413/A 413M
A 417
Test Methods and Definitions for Mechanical Testing of
Steel Products
Carbon and Alloy Steel Forgings for Thin-Walled
Pressure Vessels
Standard Specification for Seamless Austenitic Steel
Pipe for High-Temperature Central-Station Service
Practice for Cleaning, Descaling, and Passivation of
Stainless Steel Parts, Equipment, and Systems
Metal-Arc-Welded Steel Pipe for Use with HighPressure Transmission Systems
Steel Bars and Shapes, Carbon Rolled from "T" Rails
Specification for Aluminum and Aluminum-Alloy Bar,
Rod, and Wire
Specification for Aluminum-Alloy 5005-H19 Wire for
Electrical Purposes
Safeguarding Against Warpage and Distortion During
Hot-Dip Galvanizing of Steel Assemblies
Providing High-Quality Zinc Coatings (Hot-Dip)
Standard Specification for Pressure Vessel Plates, Alloy
Steel, Chromium-Molybdenum
Standard Practice for Ultrasonic Examination of Heavy
Steel Forgings
Steel Castings, Alloy, Specially Heat-Treated, for
Pressure-Containing Parts, Suitable for HighTemperature Service
Zinc-Coated (Galvanized) Steel Poultry Fence Fabric
(Hexagonal and Straight Line)
Zinc-Coated Steel Chain-Link Fence Fabric
Steel Bars, Selection Guide, Composition, and
Mechanical Properties
Steel Wire, Chromium-Silicon Alloy
Steel Wire, Cold-Drawn, for Coiled-Type Springs
Zinc-Coated (Galvanized) Low-Carbon Steel Armor
Wire
Steel, Sheet, Carbon, for Pressure Vessels
Steel Strand, Uncoated Seven-Wire for Prestressed
Concrete
Standard Specification for Wrought Austenitic Stainless
Steel Piping Fittings
Standard Specification for Welded Large Diameter
Austenitic Steel Pipe for Corrosive or High-Temperature
Service
Carbon Steel Chain
Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed,
and Sinuous-Type Upholstery Spring Units
A 420/A 420M
A 423/A 423M
A 418
A 424
A 426
A 427
A 428/A 428M
A 449
A 467/A 467M
A 434
A 435/A 435M
A 436
A 438
A 439
A 447/A 447M
A 450/A 450M
A 451
A 453/A 453M
C 1392
A 455/A 455M
A 456/A 456M
A 459
A 460
A 466/A 466M
A 469
A 470
A 471
Standard Specification for Piping Fittings of Wrought
Carbon Steel and Alloy Steel for Low-Temperature
Service
Standard Specification for Seamless and ElectricWelded Low-Alloy Steel Tubes
Ultrasonic Examination of Turbine and Generator Steel
Rotor Forgings
Steel, Sheet, for Porcelain Enameling
Centrifugally Cast Ferritic Alloy Steel Pipe for HighTemperature Service
Wrought Alloy Steel Rolls for Cold and Hot Reduction
Weight [Mass] of Coating on Aluminum-Coated Iron or
Steel Articles
Specification for Quenched-and Tempered Steel Bolts
and Studs
Specification for Machine and Coil Chain
Steel Bars, Alloy, Hot-Wrought or Cold-Finished,
Quenched and Tempered
Standard Specification for Straight-Beam Ultrasonic
Examination of Steel Plates
Austenitic Gray Iron Castings
Transverse Testing of Gray Cast Iron
Austenitic Ductile Iron Castings
Steel Castings, Chromium-Nickel-Iron Alloy (25-12
Class), for High-Temperature Service
General Requirements for Carbon, Ferritic Alloy, and
Austenitic Alloy Steel Tubes
Centrifugally Cast Austenitic Steel Pipe for HighTemperature Service
Specification for High-Temperature Bolting Materials,
with Expansion Coefficients Comparable to Austenitic
Stainless Steels
Guide for Evaluating Failure of Structural Sealant
Glazing
Standard Specification for Pressure Vessel Plates,
Carbon Steel, High-Strength Manganese
Magnetic Particle Examination of Large Crankshaft
Forgings
Zinc-Coated Flat Steel Armoring Tape
Copper-Clad Steel Wire Strand
Weldless Chain
Vacuum-Treated Steel Forgings for Generator Rotors
Standard Specification for Vacuum-Treated Carbon and
Alloy Steel Forgings for Turbine Rotors and Shafts
Vacuum-Treated Alloy Steel Forgings for Turbine Rotor
A 474
A 475
A 48
A 485
A 489
A 476
A 476M
A 478
A 479/A 479M
A 480/A 480M
A 481
A 482
A 483
A 484/A 484M
A 487/A 487M
A 48M
A 492
A 494/A 494M
A 488/A 488M
A 49
A 490
A 490M
A 491
A 493
A 495
A 497
A 498
A 500
Disks and Wheels
Aluminum-Coated Steel Wire Strand
Zinc-Coated Steel Wire Strand
Gray Iron Castings
Specification for High Hardenability Antifriction
Bearing Steel
Specification for Carbon Steel Lifting Eyes
Ductile Iron Castings for Paper Mill Dryer Rolls
Ductile Iron Castings for Paper Mill Dryer Rolls
[Metric]
Chromium-Nickel Stainless Steel Weaving and Knitting
Wire
Specification for Stainless Steel Bars and Shapes for
Use in Boilers and Other Pressure Vessels
Standard Specification for General Requirements for
Flat-Rolled Stainless and Heat-Resisting Steel Plate,
Sheet, and Strip
Chromium Metal
Ferrochrome-Silicon
Silicomanganese
General Requirements for Stainless Steel Bars, Billets,
and Forgings
Steel Castings Suitable for Pressure Service
Gray Iron Castings [Metric]
Standard Specification for Stainless Steel Rope Wire
Castings, Nickel and Nickel Alloy
Standard Practice for Steel Castings, Welding,
Qualifications of Procedures and Personnel
Standard Specification for Heat-Treated Carbon Steel
Joint Bars, Microalloyed Joint Bars, and Forged Carbon
Steel Compromise Joint Bars
Specification for Heat-Treated Steel Structural Bolts,
150 ksi Minimum Tensile Strength
Specification for High-Strength Steel Bolts, Classes 10.9
and 10.9.3, for Structural Steel Joints [Metric]
Aluminum-Coated Steel Chain-Link Fence Fabric
Standard Specification for Stainless Steel Wire and Wire
Rods for Cold Heading and Cold Forging
Calcium-Silicon Alloys
Standard Specification for Steel Welded Wire Fabric,
Deformed, for Concrete Reinforcement
Seamlees and Welded Carbon, Ferritic, and Austenitic
Alloy Steel Heat-Exchanger Tubes with Integral Fins
Standard Specification for Cold-Formed Welded and
Seamless Carbon Steel Structural Tubing in Rounds and
A 501
A 502
A 504
A 554
A 563
A 505
A 506
A 507
A 508/A 508M
A 510
A 510M
A 511
A 512
A 513
A 514/A 514M
A 515/A 515M
A 570/A 570M
A 516/A 516M
A 517/A 517M
A 518
A 519
A 518M
A 520
A 521
A 522/A 522M
Shapes
Standard Specification for Hot-Formed Welded and
Seamless Carbon Steel Structural Tubing
Steel Structural Rivets
Wrought Cabon Steel Wheels
Welded Stainless Steel Mechanical Tubing
Carbon and Alloy Steel Nuts
Steel, Sheet and Strip, Alloy, Hot-Rolled and ColdRolled, General Requirements for
Specification for Alloy and Structural Alloy Steel, Sheet
and Strip, Hot-Rolled and Cold-Rolled
Specification for Drawing Alloy Steel, Sheet and Strip,
Hot-Rolled and Cold-Rolled
Quenched and Tempered Vacuum-Treated Carbon and
Alloy Steel Forgings for Pressure Vessels
General Requirements for Wire Rods and Coarse Round
Wire, Carbon Steel
General Requirements for Wire Rods and Coarse Round
Wire, Carbon Steel [Metric]
Seamless Stainless Steel Mechanical Tubing
Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
Standard Specification for Electric-Resistance-Welded
Carbon and Alloy Steel Mechanical Tubing
Standard Specification for High-Yield-Strength,
Quenched and Tempered Alloy Steel Plate, Suitable for
Welding
Specification for Pressure Vessel Plates, Carbon Steel,
for Intermediate- and Higher-Temperature Service
Structural Steel, Sheet and Strip, Carbon, Hot-Rolled
Standard Specification for Pressure Vessel Plates,
Carbon Steel, for Moderate- and Lower-Temperature
Service
Specification for Pressure Vessel Plates, Alloy Steel,
High-Strength, Quenched and Tempered
Corrosion-Resistant High-Silicon Iron Castings
Seamless Carbon and Alloy Steel Mechanical Tubing
Corrosion-Resistant High-Silicon Iron Castings [Metric]
Supplementary Requirements for Seamless and ElectricResistance-Welded Carbon Steel Tubular Products for
High-Temperature Service Conforming to ISO
Recommendations for Boiler Construction
Steel, Closed-Impression Die Forgings for General
Industrial Use
Standard Specification for Forged or Rolled 8 and 9°
Nickel Alloy Steel Flanges, Fittings, Valves, and Parts
A 523
A 973/A 973M
B 210
B 210M
A 524
A 529/A 529M
A 530/A 530M
A 531/A 531M
A 532/A 532M
A 533/A 533M
A 534
A 536
A 537/A 537M
A 539
C 1394
A 53/A 53M
A 540/A 540M
A 542/A 542M
A 543/A 543M
D 6687
A 541/A 541M
A 550
A 551
A 553/A 553M
for Low-Temperat
Plain End Seamless and Electric-Resistance-Welded
Steel Pipe for High-Pressure Pipe-Type Cable Circuits
Grade 100 Alloy Steel Chain
Specification for Aluminum-and Aluminum-Alloy
Drawn Seamless Tubes
Specification for Aluminum and Aluminum-Alloy
Drawn Seamless Tubes [Metric]
Seamless Carbon Steel Pipe for Atmospheric and
Lower-Temperatures
Standard Specification for High-Strength CarbonManganese Steel of Structural Quality
General Requirements for Specialized Carbon and Alloy
Steel Pipe
Ultrasonic Examination of Turbine-Generator Steel
Retaining Rings
Abrasion-Resistant Cast Irons
Pressure Vessel Plates, Alloy Steel, Quenched and
Tempered, Manganese-Molybdenum and ManganeseMolybdenum-Nickel
Carburizing Steels for Anti-Friction Bearings
Ductile Iron Castings
Standard Specification for Pressure Vessel Plates, HeatTreated, Carbon-Manganese-Silicon Steel
Electric-Resistance-Welded Coiled Steel Tubing for Gas
and Fuel Oils Lines
Guide for In-Situ Structural Silicone Glazing Evaluation
Standard Specification for Pipe, Steel, Black and HotDipped, Zinc-Coated, Welded and Seamless
Specification for Alloy-Steel Bolting Materials for
Special Applications
Standard Specification for Pressure Vessel Plates, Alloy
Steel, Quenched-and-Tempered, ChromiumMolybdenum, and Chromium-Molybdenum-Vanadium
Specification for Pressure Vessel Plates, Alloy Steel,
Quenched and Tempered Nickel-ChromiumMolybdenum
Standard Guide for Testing Printing Ink Vehicles and
Components Thereof
Steel Forgings, Carbon and Alloy, Quenched and
Tempered, for Pressure Vessel Components
Ferrocolumbium
Specification for Steel Tires
Standard Specification for Pressure Vessel Plates, Alloy
Steel, Quenched and Tempered 8 and 9 Percent Nickel
A 555/A 555M
A 556/A 556M
A 560/A 560M
A 561
A 562/A 562M
A 563M
A 564/A 564M
A 565
A 568/A 568M
A 569/A 569M
A 571
A 571M
A 574
A 574M
A 580/A 580M
A 572/A 572M
A 573/A 573M
A 575
A 577/A 577M
A 578/A 578M
A 576
A 579
A 581/A 581M
A 582/A 582M
A 583
General Requirements for Stainless Steel Wire and Wire
Rods
Seamless Cold-Drawn Carbon Steel Feedwater Heater
Tubes
Castings, Chromium-Nickel Alloy
Macroetch Testing of Tool Steel Bars
Standard Specification for Pressure Vessel Plates,
Carbon Steel, Manganese-Titanium for Glass or
Diffused Metallic Coatings
Carbon and Alloy Steel Nuts [Metric]
Standard Specification for Hot-Rolled and ColdFinished Age-Hardening Stainless Steel Bars and
Shapes
Martensitic Stainless Steel Bars, Forgings, and Forging
Stock for High-Temperature Service
Standard Specification for Steel, Sheet, Carbon, and
High-Strength, Low-Alloy, Hot-Rolled and ColdRolled, General Requirements for
Steel, Carbon (0.15 Maximum, Percent), Hot Rolled
Sheet and Strip Commercial
Austenitic Dectile Iron Castings for Pressure-Containing
Parts Suitable for Low-Temperature Service
Standard Specification for Austenitic Ductile Iron
Castings for Pressure-Containing Parts Suitable for
Low-Temperature Service
Specification for Alloy Steel Socket-Head Cap Screws
Specification for Alloy Steel Socket-Head Cap Screws
[Metric]
Stainless Steel Wire
Standard Specification for High-Strength Low-Alloy
Columbium-Vanadium Structural Steel
Standard Specification for Structural Carbon Steel Plates
of Improved Toughness
Steel Bars, Carbon, Merchant Quality, M-Grades
Standard Specification for Ultrasonic Angle-Beam
Examination of Steel Plates
Standard Specification for Straight-Beam Ultrasonic
Examination of Plain and Clad Steel Plates for Special
Applications
Steel Bars, Carbon, Hot-Wrought, Special Quality
Superstrength Alloy Steel Forgings
Standard Specification for Free-Machining Stainless
Steel Wire and Wire Rods
Standard Specification for Free-Machining Stainless
Steel Bars
Specification for Cast Steel Wheels for Railway Service
A 584
A 595
A 623
A 623M
A 585
A 586
A 587
A 588/A 588M
A 589
A 591/A 591M
A 592/A 592M
A 596/A 596M
A 597
A 624/A 624M
A 630
A 66
A 829/A 829M
A 598
A 599/A 599M
A 600
A 601
A 602
A 603
A 604
A 606
A 607
A 608
Aluminum-Coated Woven Wire Fence Fabric
Steel Tubes, Low-Carbon, Tapered for Structural Use
Standard Specification for Tin Mill Products, General
Requirements
Standard Specification for Tin Mill Products, General
Requirements [Metric]
Aluminium-Coated Steel Barbed Wire
Zinc-Coated Parallel and Helical Steel Wire Structural
Strand and Zinc-Coated Wire for Spun-In-Place
Structural Strand
Electric-Welded Low-Carbon Steel Pipe for the
Chemical Industry
Standard Specification for High-Strength Low-Alloy
Structural Steel with 50 ksi [345 MPa] Minimum Yield
Point to 4-in. [100-mm] Thick
Seamless and Welded Carbon Steel Water-Well Pipe
Steel Sheet, Electrolytic Zinc-Coated, for Light Coating
Weight [Mass] Applications
High-Srength Quenched and Tempered Low-Alloy Steel
Forged Fittings and Parts for Pressure Vessels
Direct-Current Magnetic Properties of Materials Using
the Ballistic Method and Ring Specimens
Cast Tool Steel
Tin Mill Products, Electrolytic Tin Plate, Single
Reduced
Determination of Tin Coating Weights for Electrolytic
Tin Plate
Standard Specification for Steel Screw Spikes
Standard Specification for Alloy Structural Steel Plates
Magnetic Properties of Magnetic Amplifier Cores
Tin Mill Products, Electrolytic Tin-coated, Cold-Rolled
Sheet
Tool Steel High-Speed
Electrolytic Manganese Metal
Automotive Malleable Iron Castings
Zinc-Coated Steel Structural Wire Rope
Macroetch Testing of Consumable Electrode Remelted
Steel Bars and Billets
Steel, Sheet and Strip, High-Strength, Low-Alloy, HotRolled and Cold-Rolled, with Improved Atmospheric
Corrosion Resistance
Steel, Sheet and Strip, High-Strength Low-Alloy,
Columbium or Vanadium, or Both, Hot-Rolled and
Cold-Rolled
Centrifugally Cast Iron-Chromium-Nickel High-Alloy
C 1395/C 1395M
A 609/A 609M
A 610
A 611
A 612/A 612M
A 615/A 615M
A 616/A 616M
A 617/A 617M
A 618
A 620/A 620M
A 622/A 622M
A 625/A 625M
A 626/A 626M
A 632
A 633/A 633M
A 627
A 629
A 635/A 635M
A 636
A 638/A 638M
A 640
A 641/A 641M
A 649/A 649M
A 65
Tubing for Pressure Application at High-Temperatures
Specification for Gypsum Ceiling Board
Castings, Carbon, Low-Alloy, and Martensitic Stainless
Steel, Ultrasonic Examination Thereof
Determination of Size
Steel, Sheet, Carbon, Cold-Rolled Structural Quality
Standard Specification for Pressure Vessel Plates,
Carbon Steel, High Strength, for Moderate and Lower
Temperature Service
Standard Specification for Deformed and Plain BilletSteel Bars for Concrete Reinforcement
Specification for Rail-Steel Deformed and Plain Bars for
Concrete Reinforcement
Axle-Steel Deformed and Plain Bars for Concrete
Reinforcemen
Standard Specification for Hot-Formed Welded and
Seamless High-Strength Low-Alloy Structural Tubing
Steel, Sheet, Carbon, Drawing Quality, Special Killed
Cold-Rolled
Steel, Sheet and Strip, Carbon, Drawing Quality, Special
Killed, Hot-Rolled
Tin Mill Products, Black Plate, Single-Reduced
Tin Mill Products, Electrolytic Tin Plate, Double
Reduced
Standard Specification for Seamless and Welded
Austenitic Stainless Steel Tubing (Small-Diameter) for
General Service
Standard Specification for Normalized High-Strength
Low-Alloy Structural Steel Plates
Homogeneous Tool-Resisting Steel Bars for Security
Applications
Tool-Resisting Steel Flat Bars and Shapes for Security
Applications
Standard Specification for Steel, Sheet and Strip, HeavyThickness Coils, Carbon, Hot-Rolled
Nickel Oxide Sinter
Precipitation Hardening Iron Base Superalloy Bars,
Forgings, and Forging Stock for High-Temperature
Service
Zinc-Coated Steel Strand for Messenger Support of
Figure 8 Cable
Zinc-Coated (Galvanized) Carbon Steel Wire
Forged Steel Rolls Used for Corrugating Paper
Machinery
Standard Specification Steel Track Spikes
A 644
A 645/A 645M
A 646
A 648
A 650/A 650M
A 653/A 653M
A 656/A 656M
A 657/A 657M
A 659/A 659M
A 660
A 684/A 684M
A 686
A 712
A 663/A 663M
A 666
A 67
A 662/A 662M
A 664
A 667/A 667M
A 668/A 668M
A 671
A 672
A 673/A 673M
A 674
Iron Castings
Pressure Vessel Plates, Five Percent Nickel Alloy Steel,
Specially Heat Treated
Premium Quality Alloy Steel Blooms and Billets for
Aircraft and Aerospace Forgings
Standard Specification for Steel Wire, Hard Drawn for
Prestressing Concrete Pipe
Tin Mill Products, Black Plate, Double Reduced
Standard Specification for Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed)
by the Hot-Dip Process
Standard Specification for Hot-Rolled Structural Steel,
High-Strength Low-Alloy Plate with Improved
Formability
Tin Mill Products, Black Plate Electrolytic ChromiumCoated, Single and Double Reduced
Steel Carbon (0.16 Maximum to 0.25 Maximum
Percent), Hot-Rolled Sheet and Strip, Commercial
Quality
Centrifugally Cast Carbon Steel Pipe for HighTemperature Service
Steel, Strip, High-Carbon, Cold-Rolled
Specification for Tool Steel, Carbon
Electrical Resistivity of Soft Magnetic Alloys
Standard Specification for Steel Bars, Carbon, Merchant
Quality, Mechanical Properties
Annealed or Cold-Worked Austenitic Stainless Steel
Sheet, Strip, Plate, and Flat Bar
Standard Specification for Steel Tie Plates, Low-Carbon
and High-Carbon-Hot-Worked
Pressure Vessel Plates, Carbon-Manganese, for
Moderate and Lower Temperature Service
Identification of Standard Electrical- and LaminationsSteel Grades in ASTM Specifications
Centrifugally Cast Dual Metal (Gray and White Cast
Iron) Cylinders
Steel Forgings, Carbon and Alloy, for General Industrial
Use
Electric-Fusion-Welded Steel Pipe for Atmospheric and
Lower-Temperatures
Electric-Fusion-Welded Steel Pipe for High-Pressure
Service at Moderate Temperatures
Sampling Procedure for Impact Testing of Structural
Steel
Standard Practice for Polyethylene Encasement for
Ductile Iron Pipe for Water or Other Liquids
A 675/A 675M
A 678/A 678M
A 679/A 679M
A 681
A 682/A 682M
A 687
A 688/A 688M
A 689
A 690/A 690M
A 691
A 694/A 694M
A 697
A 698/A 698M
A 6/A 6M
A 693
A 695
A 696
A 700
A 701
A 702
A 703/A 703M
A 704/A 704M
A 705/A 705M
A 706/A 706M
Steel Bars, Carbon, Hot-Wrought, Special Quality,
Mechanical Properties
Standard Specification for Quenched-and-Tempered
Carbon and High-Strength Low-Alloy Structural Steel
Plates
Steel Wire High Tensile Strength, Hard-Drawn
Tools Steels Alloy
Specification for Steel, Strip, High-Carbon, ColdRolled, General Requirements For
High-Strength Nonheaded Steel Bolts and Studs
Standard Specification for Welded Austenitic Stainless
Steel Feedwater Heater Tubes
Carbon and Alloy Steel Bars for Springs
Standard Specification for High-Strength Low-Alloy
Steel H-Piles and Sheet Piling for Use in Marine
Environments
Carbon and Alloy Steel Pipe, Electric-Fusion-Welded
for HIgh-Pressure Service at High Temperatures
Specification for Carbon and Alloy Steel Forgings for
Pipe Flanges, Fittings, Valves, and Parts for HighPressure Transmission Service
Alternating-Current Magnetic Properties of Laminated
Core Specimen Using the Voltmeter-AmmeterWattmeter Methods
Magnetic Shield Efficiency in Attenuating Alternating
Magnetic Fields
Standard Specification for General Requirements for
Rolled Structural Steel Bars, Plates, Shapes, and Sheet
Piling
Precipitation-Hardening Stainless and Heat-Resisting
Steel Plate, Sheet, and Strip
Steel Bars, Carbon, Hot-Wrought, Special Quality, for
Fluid Power Applications
Steel Bars, Carbon, Hot-Wrought or Cold-Finished,
Special Quality, for Pressure Piping Components
Packaging, Marking, and Loading Methods for Steel
Products for Domestic Shipment
Ferromanganese-Silicon
Steel Fence Posts and Assemblies, Hot Wrought
Standard Specification for Steel Castings, General
Requirements, for Pressure-Containing Parts
Welded Steel Plain Bar or Rod Mats for Concrete
Reinforcement
Standard Specification for Age-Hardening Stainless
Steel Forgings
Standard Specification for Low-Alloy Steel Deformed
A 707/A 707M
A 709/A 709M
A 710/A 710M
A 711
A 713
A 714
A 715
A 716
A 721
A 722/A 722M
A 740
A 719
A 720
A 724/A 724M
A 717/A 717M
A 723/A 723M
A 726/A 726M
A 727/A 727M
A 729
A 730
A 732/A 732M
C 1396/C 1396M
A 734/A 734M
A 735/A 735M
and Plain Bars for Concrete Reinforcement
Standard Specification for Forged Carbon and Alloy
Steel Flanges for Low-Temperature Service
Standard Specification for Carbon and High-Strength
Low-Alloy Structural Steel Shapes, Plates, and Bars and
Quenched-and-Tempered Alloy St
Standard Specification for Age-Hardening Low-Carbon
Nickel-Copper-Chromium-Molybdenum-Columbium
Alloy Structural Steel Plates
Steel Forging Stock
Steel Wire, High-Carbon Spring, for Heat-Treated
Components
High-Strength Low-Alloy Welded and Seamless Steel
Pipe
Steel Sheet and Strip, High-Strength, Low-Alloy, HotRolled, and Steel Sheet, Cold-Rolled, High-Strength,
Low-Alloy, with Improved Formability
Specification for Ductile Iron Culvert Pipe
Ductility of Oriented Electrical Steel
Uncoated High-Strength Steel Bars for Prestressing
Concrete
Hardware Cloth (Woven or Welded Galvanized Steel
Wire Fabric)
Lamination Factor of Magnetic Materials
Ductility of Nonoriented Electrical Sheet Steel
Pressure Vessel Plates, Carbon Steel, Quenched and
Tempered, for Welded Layered Pressure Vessels
Surface Insulation Resistivity of Single-Strip Specimens
Alloy Steel Forgings for High-Strength Pressure
Component Application
Cold-Rolled Magnetic Lamination Quality Steel,
Semiprocessed Types
Standard Specification for Carbon Steel Forgings for
Piping Components with Inherent Notch Toughness
Alloy Steel Axles, Heat-Treated, for Mass Transit and
Electric Railway Service
Forgings, Carbon and Alloy Steel, for Railway Use
Castings, Investment, Carbon and Low Alloy Steel for
General Application, and Cobalt Alloy for High
Strength at Elevated Temperatures
Standard Specification for Gypsum Board
Pressure Vessel Plates, Alloy Steel and High-Strength
Low-Alloy Steel, Quenched-and-Tempered
Pressure Vessel Plates, Low-Carbon ManganeseMolybdenum-Columbium Alloy Steel, for Moderate and
Lower Temperature Service
A 736/A 736M
A 737/A 737M
A 738/A 738M
A 739
A 74
A 741
A 746
A 759
A 775/A 775M
A 788
A 742/A 742M
A 743/A 743M
A 744/A 744M
A 748/A 748M
A 745/A 745M
A 747/A 747M
A 749/A 749M
A 750
A 751
A 751
A 751
A 751
A 751
A 752
A 752M
A 753
A 754/A 754M
A 755/A 755M
Standard Specification for Pressure Vessel Plates, LowCarbon Age-Hardening Nickel-Copper-ChromiumMolybdenum-Columbium and Nickel-CopperManganese
Pressure Vessel Plates, High-Strength, Low-Alloy Steel
Pressure Vessel Plates, Heat-Treated, CarbonManganese-Silicon Steel, for Moderate and Lower
Temperature Service
Steel Bars, Alloy, Hot-Wrought, for Elevated
Temperature or Pressure-Containing Parts, or Both
Cast Iron Soil Pipe and Fittings
Zinc-Coated Steel Wire Rope and Fittings for Highway
Guardrail
Specification for Ductile Iron Gravity Sewer Pipe
Standard Specification for Carbon Steel Crane Rails
Standard Specification for Epoxy-Coated Steel
Reinforcing Bars
Specification for Steel Forgings, General Requirements
Steel Sheet, Metallic Coated and Polymer Precoated for
Corrugated Steel Pipe
Castings, Iron-Chromium, Iron-Chromium-Nickel,
Corrosion Resistant, for General Application
Standard Specification for Castings, Iron-ChromiumNickel, Corrosion Resistant, for Severe Service
Statically Cast Chilled White Iron-Gray Iron Dual Metal
Rolls for Pressure Vessel Use
Ultrasonic Examination of Austenitic Steel Forgings
Steel Castings, Stainless, Precipitation Hardening
Steel, Strip, Carbon and High-Strength, Low-Alloy,
Hot-Rolled, General Requirements for
Steel Air Ventilating Grille Units for Detention Areas
Chemical Analysis of Steel Products
Chemical Analysis of Steel Products
Chemical Analysis of Steel Products
Chemical Analysis of Steel Products
Chemical Analysis of Steel Products
General Requirements for Wire Rods and Coarse Round
Wire, Alloy Steel
General Requirements for Wire Rods and Coarse Round
Wire Alloy Steel (Metric)
Wrought Nickel-Iron Soft Magnetic Alloys (UNS
K94490, K94840, N14076, N14080)
Standard Test Method for Coating Weight (Mass) of
Metallic Coatings on Steel by X-Ray Fluorescence
Steel Sheet, Metallic Coated by the Hot-Dip Process and
A 756
A 757/A 757M
A 758/A 758M
A 760/A 760M
A 761/A 761M
A 762/A 762M
A 763
A 764
A 765/A 765M
A 767/A 767M
A 768
A 769/A 769M
A 770/A 770M
A 771/A 771M
A 772/A 772M
A 773/A 773M
A 774/A 774M
A 778
A 779/A 779M
Prepainted by the Coil-Coating Process for Exterior
Exposed Building Products
Standard Specification for Stainless Anti-Friction
Bearing Steel
Steel Castings, Ferritic and Martensitic, for PressureContaining and Other Applications, for LowTemperature Service
Standard Specification for Wrought-Carbon Steel ButtWelding Piping Fittings with Improved Notch
Toughness
Corrugated Steel Pipe, Metallic-Coated for Sewers and
Drains
Corrugated Steel Structural Plate, Zinc-Coated, for
Field-Bolted Pipe, Pipe-Arches, and Arches
Corrugated Steel Pipe, Polymer Precoated for Sewers
and Drains
Detecting Susceptibility to Intergranular Attack in
Ferritic Stainless Steels
Standard Specification for Metallic Coated Carbon Steel
Wire, Coated at Size and Drawn to Size for Mechanical
Springs
Carbon Steel and Low-Alloy Steel Pressure-VesselComponent Forgings with Mandatory Toughness
Requirements
Standard Specification for Zinc-Coated (Galvanized)
Steel Bars for Concrete Reinforcement
Vacuum-Treated 12% Chromium Alloy Steel Forgings
for Turbine Rotors and Shafts
Standard Specification for Carbon and High-Strength
Electric Resistance Welded Steel Structural Shapes
Standard Specification for Through-Thickness Tension
Testing of Steel Plates for Special Applications
Standard Specification for Seamless Austenitic and
Martensitic Stainless Steel Tubing for Liquid MetalCooled Reactor Core Comp
Standard Test Method for ac Magnetic Permeability of
Materials Using Sinusoidal Current
dc Magnetic Properties of Materials Using Ring and
Permeameter Procedures with dc Electronic
Hysteresigraphs
Standard Specification for As-Welded Wrought
Austenitic Stainless Steel Fittings for General Corrosive
Service at Low and Moderate Tempera
Standard Specification for Welded, Unannealed
Austenitic Stainless Steel Tubular Products
Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-
A 780
A 781/A 781M
A 782/A 782M
A 786/A 786M
A 787
A 789/A 789M
A 790/A 790M
A 792/A 792M
A 793
A 794
A 795
A 796/A 796M
A 799/A 799M
A 800/A 800M
A 798/A 798M
A 801/A 801M
A 805
A 82
A 823
A 802/A 802M
A 803/A 803M
A 804/A 804M
Relieved for Prestressed Concrete
Repair of Damaged and Uncoated Areas of Hot-Dip
Galvanized Coatings
Standard Specification for Castings, Steel and Alloy,
Common Requirements, for General Industrial Use
Standard Specification for Pressure-Vessel Plates,
Quenched-and-Tempered, Manganese-ChromiumMolybdenum-Silicon Zirconium Alloy
Standard Specification for Hot-Rolled Carbon, LowAlloy, High-Strength Low-Alloy, and Alloy Steel Floor
Plates
Standard Specification for Electric-Resistance-Welded
Metallic-Coated Carbon Steel Mechanical Tubing
Standard Specification for Seamless and Welded
Ferritic/Austenitic Stainless Steel Tubing for General
Service
Standard Specification for Seamless and Welded
Ferritic/Austenitic Stainless Steel Pipe
Standard Specification for Steel Sheet, 55 % AluminumZinc Alloy-Coated by the Hot-Dip Process
Rolled Floor Plate, Stainless Steels
Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25%
Maximum), Cold-Rolled, Commercial Quality
Standard Specification for Black and Hot-Dipped ZincCoated (Galvanized) Welded and Seamless Steel Pipe
for Fire Protection Use
Structural Design of Corrugated Steel Pipe, PipeArches, and Arches for Storm and Sanitary Sewers and
Other Buried Applications
Steel Castings, Stainless, Instrument Calibration, for
Estimating Ferrite Content
Standard Practice for Steel Casting, Austenitic Alloy,
Estimating Ferrite Content Thereof
Installing Factory-Made Corrugated Steel Pipe for
Sewers and Other Applications
Iron-Cobalt High Magnetic Saturation Alloys
Steel, Flat Wire, Carbon, Cold-Rolled
Standard Specification for Steel Wire, Plain, for
Concrete Reinforcement
Specification for Statically Cast Permanent Mold Gray
Iron Castings
Standard Practice for Steel Castings, Surface
Acceptance Standards, Visual Examination
Standard Specification for Welded Ferritic Stainless
Steel Feedwater Heater Tubes
Alternating-Current Magnetic Properties of Materials at
A 807/A 807M
A 808/A 808M
A 809
A 810
A 811
A 813/A 813M
A 814/A 814M
A 815/A 815M
C 1397
A 817
A 818
A 820
A 822
A 826/A 826M
A 827/A 827M
A 830/A 830M
A 831/A 831M
A 824
A 832/A 832M
A 842
A 853
A 877/A 877M
A 833
Power Frequencies Using Sheet-Type Test Specimens
Installing Corrugated Steel Structural Plate Pipe for
Sewers and Other Applications
Standard Specification for High-Strength, Low-Alloy
Carbon, Manganese, Columbium, Vanadium Steel of
Structural Quality with Improved Notch Toughness
Aluminum-Coated (Aluminized) Carbon Steel Wire
Zinc-Coated (Galvanized) Steel Pipe Windig Mesh
Soft Magnetic Iron Parts Fabricated by Powder
Metallurgy (P/M) Techniques
Standard Specification for Single- or Double-Welded
Austenitic Stainless Steel Pipe
Standard Specification for Cold-Worked Welded
Austenitic Stainless Steel Pipe
Standard Specification for Wrought Ferritic,
Ferritic/Austenitic, and Martensitic Stainless Steel
Piping Fittings
Application of Class PB Exterior Insulation and Finish
Systems
Metallic-Coated Steel Wire for Chain Link Fence Fabric
Coppered Carbon Steel Wire
Steel Fibers for Fiber Reinforced Concrete
Standard Specification for Seamless Cold-Drawn
Carbon Steel Tubing for Hydraulic System Service
Standard Specification for Seamless Austenitic and
Martensitic Stainless Steel Duct Tubes for Liquid MetalCooled Reactor Core
Plates, Carbon Steel, for Forging and Similar
Applications
Standard Specification for Plates, Carbon Steel,
Structural Quality, Furnished to Chemical Composition
Requirements
Standard Specification for Austenitic and Martensitic
Stainless Steel Bars, Billets, and Forgings for Liquid
Metal Cooled Reactor Core Components
Metallic-Coated Steel Marcelled Tension Wire for Use
with Chain Link Fence
Standard Specification for Pressure Vessel Plates, Alloy
Steel, Chromium-Molybdenum-Vanadium
Standard Specification for Compacted Graphite Iron
Castings
Steel Wire, Carbon, for General Use
Steel Wire, Chromium-Silicon Alloy Valve Spring
Quality
Indentation Hardness of Metallic Materials by
Comparison Hardness Testers
A 834
A 835
A 836/A 836M
A 837
A 838/A 838M
A 839/A 839M
A 840
A 840M
A 841/A 841M
A 956
A 970/A 970M
A 972/A 972M
A 844/A 844M
A 845
A 846
A 848/A 848M
A 849
A 852/A 852M
A 854/A 854M
A 847
A 851
A 855/A 855M
A 856/A 856M
A 857/A 857M
Standard Specification for Common Requirements for
Iron Castings for General Industrial Use
Sizes of Ferroalloys and Alloy Additives
Standard Specification for Titanium-Stabilized Carbon
Steel Forgings for Glass-Lined Piping and Pressure
Vessel Service
Steel Forgings, Alloy, for Carburizing Applications
Free-Machining Ferrtic Stainless Soft Magnetic Alloy
Bar for Relay Applications
Iron-Phosphorus Powder Metallurgy (P/M) Parts for
Soft Magnetic Applications
Fully Processed Magnetic Lamination Steel
Fully Processed Magnetic Lamination Steel (Metric)
Standard Specification for Steel Plates for Pressure
Vessels, Produced by Thermo-Mechanical Control
Process (TMCP)
Test Method for Leeb Hardness Testing of Steel
Products
Welded or Forged Headed Bars for Concrete
Reinforcement
Specification for Fusion Bonded Epoxy-Coated Pipe
Piles
Steel Plates, 9% Nickel Alloy, for Pressure Vessels,
Produced by the Direct-Quenching Process
Titanium Scrap for Use in Deoxidation and Alloying of
Steel
Aluminum Scrap for Use in Deoxidation and Alloying
of Steel
Low-Carbon Magnetic Iron
Specification for Post-Applied Coatings, Pavings, and
Linings for Corrugated Steel Sewer and Drainage Pipe
Standard Specification for Quenched and Tempered
Low-Alloy Structural Steel Plate with 70 ksi [485 MPa]
Minimum Yield Strength to 4 in. [100 mm] Thick
Metallic-Coated Steel Smooth High-Tensile Fence and
Trellis Wire
Cold-Formed Welded and Seamless High-Strength,
Low-Alloy Structural Tubing with Improved
Atmospheric Corrosion Resistance
High-Frequency Induction Welded, Unannealed,
Austenitic Steel Condenser Tubes
Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel
Wire Strand
Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon
Steel Wire
Standard Specification for Steel Sheet Piling, Cold
A 858/A 858M
A 859/A 859M
A 860/A 860M
A 861
A 862/A 862M
A 865
A 821/A 821M
A 910/A 910M
A 950/A 950M
A 866
A 867/A 867M
A 871/A 871M
A 872
A 874/A 874M
A 875/A 875M
C 1264
D 5847
F 1958/F 1958M
F 1959/F 1959M
A 876/A 876M
A 878/A 878M
A 902
Formed, Light Gage
Standard Specification for Heat-Treated Carbon Steel
Fittings for Low-Temperature and Corrosive Service
Steel Forgings, Low-Carbon Age-Hardening NickelCopper-Chromium-Molybdenum-Columbium Alloy
Steel, for Pressure Vessel Components
Standard Specification for Wrought High-Strength LowAlloy Steel Butt-Welding Fittings
High-Silicon Iron Pipe and Fittings
Application of Asphalt Coatings to Corrugated Steel
Sewer and Drainage Pipe
Threaded Couplings, Steel, Black or Zinc-Coated
(Galvanized) Welded or Seamless, for Use in Steel Pipe
Joints
Specification for Steel Wire, Hard Drawn for
Prestressing Concrete Tanks
Specification for Uncoated, Weldless, 2- and 3-Wire
Steel Strand for Prestressed Concrete
Standard Specification for Fusion-Bonded EpoxyCoated Structural Steel H-Piles and Sheet Pilling
Medium Carbon Anti-Friction Bearing Steel
Iron-Silicon Relay Steels
Standard Specification for High-Strength Low-Alloy
Structural Steel Plate With Atmospheric Corrosion
Resistance
Centrifugally Cast Ferritic/Austenitic Stainless Steel
Pipe for Corrosive Environments
Ferritic Ductile Iron Castings Suitable for LowTemperature Service
Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the
Hot-Dip Process
Standard Specification for Sampling, Inspection,
Rejection, Certification, Packaging, Marking, Shipping,
Handling, and Storage of Gypsum Board
Practice for Writing Quality Control Specifications for
Standard Test Methods for Water Analysis
Standard Test Method for Determining the Ignitability
of Non-flame-Resistant Materials for Clothing by
Electric Arc Exposure Method Using Mannequins
Standard Test Method for Determining the Arc Thermal
Performance Value of Materials for Clothing
Flat-Rolled, Grain-Oriented, Silicon-Iron, Electricl
Steel, Fully Processed Types(Metric)
Steel Wire, Modified Chromium Vanadium Valve
Spring Quality
Terminology Relating to Metallic Coated Steel Products
A 904
A 938
A 951
A 879
A 880
A 881/A 881M
A 882/A 882M
A 883
A 884/A 884M
A 885/A 885M
A 886/A 886M
A 887
A 888
A 889/A 889M
A 890/A 890M
A 891
A 892
A 893
A 894/A 894M
A 895
A 896
A 897
A 897M
A 898/A 898M
50 Nickel-50 Iron Powder Metallurgy (P/M) Soft
Magnetic Parts
Torsion Testing of Wire
Standard Specification for Masonry Joint Reinforcement
Steel Sheet, Zinc-Coated by the Electrolytic Process for
Applications Requiring Designation of the Coating Mass
on Each Surface
Criteria for Use in Evaluation of Testing Laboratories
and Organizations for Examination and Inspection of
Steel, Stainless Steel, and Related Alloys
Steel Wire, Deformed, Stress-Relieved, or LowRelaxation for Prestressed Concrete Railroad Ties
Epoxy-Coated Seven-Wire Prestressing Steel Strand
Ferrimagnetic Resonance Linewidth and Gyromagnetic
Ratio of Nonmetallic Magnetic Materials
Standard Specification for Epoxy-Coated Steel Wire and
Welded Wire Fabric for Reinforcement
Steel Sheet, Zinc and Aramid Fiber Composite Coated
for Corrugated Steel Sewer, Culvert, and Underdrain
Pipe
Steel Strand, Indented, Seven-Wire Stress-Relieved for
Prestressed Concrete
Borated Stainless Steel Plate, Sheet, and Strip for
Nuclear Application
Hubless Cast Iron Soil Pipe and Fittings for Sanitary and
Storm Drain, Waste, and Vent Piping Applications
Alternating-Current Magnetic Properties of Materials at
Low Inductions Using the Wattmeter-VarmeterAmmeter-Voltmeter Method and 25-cm [250-mm]
Epstein Frame
Specification for Castings, Iron-Chromium-NickelMolybdenum Corrosion-Resistant, Duplex
(Austenitic/Ferritic) for General Application
Precipitation Hardening Iron Base Superalloy Forgings
for Turbine Rotor Disks and Wheels
Standard Guide for Defining and Rating the
Microstructure of High Carbon Bearing Steels
Complex Dielectric Constant of Nonmetallic Magnetic
Materials at Microwave Frequencies
Standard Test Method for Saturation Magnetization or
Induction of Nonmetallic Magnetic Materials
Free-Machining Stainless Steel Plate, Sheet, and Strip
Conducting Case Studies of Galvanized Structures
Austempered Ductile Iron Castings
Austempered Ductile Iron Castings [Metric]
Standard Specification for Straight Beam Ultrasonic
A 899
A 900
A 901
A 903/A 903M
A 905
A 906/A 906M
A 907/A 907M
A 908
A 909
C 266
A 90/A 90M
A 911/A 911M
A 912
A 913/A 913M
A 914/A 914M
A 915/A 915M
A 917
A 922
A 923
A 928/A 928M
A 929/A 929M
A 918
A 920/A 920M
Examination of Rolled Steel Structural Shapes
Steel Wire, Epoxy-Coated
Lamination Factor of Amorphous Magnetic Strip
Amorphous Magnetic Core Alloys Semi-Processed
Types
Steel Castings, Surface Acceptance Standards, Magnetic
Particle and Liquid Penetrant Inspection
Steel Wire, Pressure Vessels Winding
Grade 80 and Grade 100 Alloy Steel Chain Slings for
Overhead Lifting
Steel, Sheet and Strip, Heavy Thickness Coils, Carbon,
Hot-Rolled, Structural Quality
Stainless Steel Needle Tubing
Steel Forgings, Microalloy, for General Industrial Use
Time of Setting of Hydraulic Cement Paste by Gillmore
Needles
Weight [Mass] of Coating on Iron and Steel Articles
with Zinc or Zinc-Alloy Coatings
Uncoated, Stress-Relieved Steel Bars for Prestressed
Concrete Ties
Alternating Current Magnetic Properties of Amorphous
Materials at Power Frequencies Using WattmeterAmmeter-Voltmeter Method with Torodial Specimens
Standard Specification for High-Strength Low-Alloy
Steel Shapes of Structural Quality, Produced by
Quenching and Self-Tempering Process (QST)
Steel Bars Subject ot Restricted End-Quench
Hardenability Requirements
Steel Castings, Carbon, and Alloy, Chemical
Requirements Similar to Standard Wrought Grades
Steel Sheet, Coated by the Electrolytic Process for
Applications Requiring Designation of the Coating Mass
on Each Surface (General Requirements)
Silicon Metal
Detecting Detrimental Intermetallic Phase in Wrought
Duplex Austenitic/Ferritic Stainless Steels
Specification for Ferritic/Austenitic (Duplex) Stainless
Steel Pipe Electric Fusion Welded with Addition of
Filler Metal
Standard Specification for Steel Sheet, Metallic-Coated
by the Hot-Dip Process for Corrugated Steel Pipe
Steel Sheet, Zinc-Nickel Alloy Coated by the
Electrolytic Process for Applications Requiring
Designation of the Coating Mass on Each Surface
Steel Bars, Microalloy, Hot-wrought, Special Quality,
Mechanical Properties
A 921/A 921M
A 924/A 924M
A 925
A 926
A 927/A 927M
A 930
A 931
A 932/A 932M
A 933/A 933M
A 934/A 934M
A 935/A 935M
A 936/A 936M
A 937
A 939
A 941
A 942
A 943/A 943M
A 947M
D 6686
A 940
A 949/A 949M
Steel Bars, Microalloy, Hot-wrought, Special Quality,
for Subsequent Hot Forging
General Requirements for Steel Sheet, Metallic-Coated
by the Hot-Dip Process
Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel
Overhead Ground Wire Strand
Comparing the Abrasion Resistance of Coating
Materials for Corrugated Metal Pipe
Alternating-Current Magnetic Properties of Torodial
Core Specimens Using the Voltmeter-AmmeterWattmeter Method
Life-Cycle Cost Analysis of Corrugated Metal Pipe
Used for Culverts, Storm Sewers and Other Buried
Conduits
Tension Testing of Wire Ropes and Strand
Test Method for Alternating-Current Magnetic
Properties of Amorphous Materials at Power
Frequencies Using Wattmeter- Ammeter-Voltmeter
Method with Sheet Specimens
Standard Specification for Vinyl (PVC) Coated Steel
Wire and Welded Wire Fabric for Reinforcement
Standard Specification for Epoxy-Coated Prefabricated
Steel Reinforcing Bars
Steel, Sheet and Strip, Heavy Thickness Coils, High
Strength, Low-Alloy, Columbium or Vanadium, or
Both, Hot-Rolled
Steel, Sheet and Strip Heavy Thickness Coils, High
Strength, Low-Alloy, Hot-Rolled, With Improved
Formability
Determining Interlaminar Resistance of Insulating
Coatings Using Two Adjacent Test Surfaces
Ultrasonic Examination from Bored Surfaces of
Cylindrical Forgings
Terminology Relating to Steel, Stainless Steel, Related
Alloys, and Ferroalloys
Standard Specification for Centrifugally Cast White
Iron/Gray Iron Dual Metal Abrasion-Resistant Roll
Shells
Standard Specification for Spray-Formed Seamless
Austenitic Stainless Steel Pipes
Standard Specification for Textured Stainless Steel
Sheet [Metric]
Standard Test Method for Evaluation of Tannin Stain
Resistance of Coatings
Turbine Rotors
Standard Specification for Spray-Formed Seamless
A 952/A 952M
A 953
A 954
A 955M
A 957
A 963/A 963M
A 967
A 969/A 969M
A 958
A 959
A 960
A 961
A 962/A 962M
A 965/A 965M
A 966/A 966M
A 968
A 971
A 974
A 975
A 980
Ferritic/Austenitic Stainless Steel Pipe
Forged Grade 80 and Grade 100 Steel Lifting
Components and Welded Attachment Links
Spcification for Austenitic Chromium- Nickel -Silicon
Alloy Steel Seamless and Weldied Tubing
Specification for Austenitic Chromium- Nickel-Silicon
Alloy Steel Seamless and Welded Pipe
Deformed and Plain Stainless Steel Bars for Concrete
Reinforcement [Metric]
Investment Castings, Steel and Alloy, Comman
Requirements, for General Industrial Use
Deep Drawing Steel (DDS), Sheet, Carbon, Cold-Rolled
Specification for Chemical Passivation Treatments for
Stainless Steel Parts
Extra Deep Drawing Steel (EDDS), Sheet, Carbon,
Cold-Rolled
Standard Specification for Steel Castings, Carbon and
Alloy, with Tensile Requirements, Chemical
Requirements Similar to Standard Wrought Grades
Standard Guide for Specifying Harmonized Standard
Grade Compositions for Wrought Stainless Steels
Standard Specification for Common Requirements for
Wrought Steel Piping Fittings
Standard Specification for Common Requirements for
Steel Flanges, Forged Fittings, Valves, and Parts for
Piping Applications
Standard Specification for Common Requirements for
Steel Fasteners or Fastener Materials, or Both, Intended
for Use at Any Temperature from Cryog
Standard Specification for Steel Forgings, Austenitic,
for Pressure and High Temperature Parts
Magnetic Particle Examination of Steel Forgings Using
Alternating Current
Chromium, Chromium-Nickel, and Silicon Alloy Steel
Bars and Shapes for Corrosion and Heat-Resisting
Service
Measuring Edge Taper and Crown of Flat-Rolled
Electrical Steel Coils
Welded Wire Fabric Gabions and Gabion
Mattresses(Metallic-Coated or Polyvinyl Chloride(PVC)
Coated)
Double-Twisted Hexagonal Mesh Gabions and Revet
Mattresses(Metallic -- Coated Steel Wire or MetallicCoated Steel Wire with Poly(Vinyl Chloride)(PVC)
Coating)
Specification for Steel, Sheet, Carbon, Ultra High
A 984/A 984M
B1
A 976
A 977
F 2078
A 978/A 978M
A 979/A 979M
A 981
A 982
A 983/A 983M
A 985/A 985M
A 986/A 986M
A 987
A 988
A 989
A 99
B 108
B 135M
B 136
A 990
A 991/A 991M
A 992/A 992M
Strength Cold Rolled
Steel Line Pipe, Black, Plain-End, Electric-ResistanceWelded
Standard Specification for Hard-Drawn Copper Wire
Insulating Coatings by Composition, Relative Insulating
Ability and Application
Magnetic Properties of High-Coercivity Permanent
Magnet Materials Using Hysteresigraphs
Standard Terminology Relating to Hydrogen
Embrittlement Testing
Composite Ribbed Steel Pipe, Precoated and
Polyethylene Lined for Gravity Flow Sanitary Sewers,
Storm Sewers, and Other Special Applications
Concrete Pavements and Linings Installed in Corrugated
Steel Structues in the Field
Evaluating Bond Strength for 15.2 mm (0.6 in.)
Diameter Prestressing Steel Strand, Grade 270,
Uncoated, Used in Prestressed Ground Anchors
Standard Specification for Steel Forgings, Stainless, for
Compressor and Turbine Airfoils
Specification for Continuous Grain Flow Forged Carbon
and Alloy Steel Crankshafts for Medium Speed Diesel
Engines
Steel Investment Castings General Requirements, for
Pressure-Containing Parts
Specification for Magnetic Particle Examination of
Continuous Grain Flow Crankshaft Forgings
Standard Test Method for Measuring Shape
Characteristics of Tin Mill Products
Hot Isostatically-Pressed Stainless Steel Flanges,
Fittings, Valves, and Parts for High Temperature Service
Hot Isostatically-Pressed Alloy Steel Flanges, Fittings,
Valves, and Parts for High Temperature Service
Ferromanganese
Aluminum-Alloy Permanent Mold Castings
Standard Specification for Seamless Brass Tube
[Metric]
Measurement of Stain Resistance of Anodic Coating on
Aluminum
Standard Specification for Castings, Iron-NickelChromium and Nickel Alloys, Specially Controlled for
Pressure Retaining Parts for Corrosive Service
Conducting Temperature Uniformity Surveys of
Furnaces Used to Heat Treat Steel Products
Standard Specification for Steel for Structural Shapes
For Use in Building Framing
A 993
A 994
A 995
A 996/A 996M
A 997
A 998/A 998M
A 999/A 999M
B 100
B 102
B 103/B 103M
B 105
B 106
B 101
B 107/B 107M
B 111
B 111M
B 114
B 115
B 116
B 117
B 121/B 121M
B 122/B 122M
B 127
B 135
B 129
Dynamic Tear Testing of Cast Irons to Establish
Transition Temperature
Editorial Procedures and Form of Product Specifications
for Steel, Stainless Steel, and Related Alloys
Castings, Austenitic-Ferritic (Duplex) Stainless Steel,
for Pressure-Containing Parts
Standard Specification for Rail-Steel and Axle-Steel
Deformed Bars for Concrete Reinforcement
Practice for Investment Castings, Surface Aceptance
Standards, Visual Examination
Practice for Structural Design of Reinforcements for
Fittings in Factory-Made Corrugated Steel Pipe for
Sewers and Other Applications
Standard Specification for General Requirements for
Alloy and Stainless Steel Pipe
Rolled Copper-Alloy Bearing and Expansion Plates and
Sheets for Bridge and Other Structural Uses
Standard Specification for Lead- and Tin-Alloy Die
Castings
Phosphor Bronze Plate, Sheet, Strip and Rolled Bar
Specification for Hard-Drawn Copper Alloy Wires for
Electric Conductors
Flexivity of Thermostat Metals
Lead-Coated Copper Sheet and Strip for Building
Construction
Specification for Magnesium-Alloy Extruded Bars,
Rods, Profiles, Tubes, and Wire
Standard Specification for Copper and Copper-Alloy
Seamless Condenser Tubes and Ferrule Stock
Standard Specification for Copper and Copper-Alloy
Seamless Condenser Tubes and Ferrule Stock [Metric]
Temperature-Resistance Constants of Sheet Materials
for Shunts and Precision Resistors
Electrolytic Cathode Copper
Figure - 9 Deep - Grooved abd Figure - 8 Copper
Trolley Wire for Industrial Haulage
Operating Salt Spray (Fog) Testing Apparatus
Leaded Brass Plate, Sheet, Strip, and Rolled Bar
Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy
(Nickel Silver), and Copper-Nickel Alloy Plate, Sheet,
Strip,, and Rolled Bar
Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and
Strip
Standard Specification for Seamless Brass Tube
Cartridge Brass Cartridge Case Cups
B 130
B 131
B 134
B 137
B 138
B 138M
B 139
B 139M
B 148
B 161
B 163
B 140/B 140M
B 150
B 150M
B 151
B 151M
B 152
B 152M
B 153
B 154
B 164
B 209
B 209M
B 159
B 159M
B 16
B 160
B 162
B 165
B 166
B 167
Commercial Bronze Strip for Bullet Jackets
Copper Alloy Bullet Jacket Cups
Brass Wire
Measurement of Coating Mass Per Unit Area on
Anodically Coated Aluminum
Maganese Bronze Rod, Bar, and Shapes
Manganese Bronze Rod, Bar and Shapes (Metric)
Phosphor Bronze Rod, Bar, and Shapes
Phosphor Bronze Rod, Bar, and Shapes (Metric)
Standard Specification for Aluminum-Bronze Sand
Castings
Specification for Nickel Seamless Pipe and Tube
Seamless Nickel and Nickel Alloy Condenser and HeatExchanger Tubes
Standard Specification for Copper-Zinc-Lead (Red
Brass or Hardware Bronze) Rod, Bar and Shapes
Aluminum Bronze Rod, Bar, and Shapes
Aluminum Bronze Rod, Bar, and Shapes (Metric)
Copper-Nickel-Zinc Alloy (Nickel Silver) and CopperNickel Rod and Bar
Nickel-Zinc Alloy (Nickel-Silver) AND Copper Nickel
Rod and Bar (Metric)
Copper Sheet, Strip, Plate, and Rolled Bar
Copper Sheet, Strip, Plate and Rolled Bar (Metric)
Expansion (Pin Test) of Copper and Copper-Alloy Pipe
and Tubing
Mercurous Nitrate Test For Copper and Copper Alloys
Nickel-Copper Alloy Rod, Bar, and Wire
Standard Specification for Aluminum and AluminumAlloy Sheet and Plate
Specification for Aluminum and Aluminum-Alloy Sheet
and Plate [Metric]
Phosphor Bronze Wire
Phosphor Bronze Wire (Metric)
Free-Cutting Brass Rod, Bar, and Shapes for Use in
Screw Machines
Nickel Rod and Bar
Nickel Plate, Sheet, and Strip
Nickel-Copper Alloy (UNS N04400) Seamless Pipe and
Tube
Standard Specification Nickel-Chromium-Iron Alloys
(UNS N06600, N06601, N06603, N06690, N06025, and
N06045) and Nickel-Chromium-Cobalt-Molybdenum
Standard Specification for Nickel-Chromium-Iron
Alloys (UNS N06600, N06601, N06603, N06690,
B 168
B 188
B 193
B 197/B 197M
B2
B 169
B 169M
B 16M
B 170
B 171
B 171M
B 172
B 173
B 174
D 6109
B 176
B 177
B 179
B 183
B 187
B 187M
B 19
B 194
B 196
B 189
B 196M
B 199
N06025, and N06045) and Nickel-Chromium-CobaltMolybd
Standard Specification Nickel-Chromium-Iron Alloys
(UNS N06600, N06601, N06603, N06690, N06025, and
N06045) and Nickel-Chromium-Cobalt-Molybdenum
Standard Specification for Seamless Copper Bus Pipe
and Tube
Standard Test Method for Resistivity of Electrical
Conductor Materials
Copper-Berrylium Alloy Wire
Specification for Medium-Hard-Drawn Copper Wire
Aluminum Bronze Plate, Sheet, Strip, and Rolled Bar
Aluminum Bronze Sheet, Strip, and Rolled Bar [Metric]
Free-Cutting Brass Rod, Bar, and Shapes for Use in
Screw Machines [Metric]
Oxygen- Free Electrolytic Copper-Ri finery Shapes
Copper Alloy Plate and Sheet for Pressure Vessels,
Condensers, and Heat exchangers
Copper-Alloy Plate and Sheet for Pressure Vessels,
Condensers and Heat Exchangers [Metric]
Standard Specification for Rope-Lay-Stranded Copper
Conductors Having Bunch-Stranded Members, for
Electrical Conductors
Standard Specification for Rope-Lay-Stranded Copper
Conductors Having Concentric-Stranded Members, for
Electrical Conductors
Bunch - Stranded Copper Conductors for Electrical
Conductors
Flexural Properties of Unreinforced and Reinforced
Plastic Lumber
Copper-Alloy Die Castings
Chromium Electroplating on Steel for Engineering Use
Aluminum Alloys in Ingot and Molten Forms for
Castings from All Casting Processes
Preparation of Low-Carbon Steel for Electroplating
Copper Bar, Bus Bar, Rod and Shapes
Copper Bar, Bus Bar, Rod and Shapes (Metric)
Standard Specification for Cartridge Brass Sheet, Strip,
Plate, Bar, and Disks (Blanks)
Copper-Beryllium Alloy Plate, Sheet, Strip, and Red Bar
Copper Berrylium Alloy Rod and Bar
Lead - Coated and Lead - Alloy - Coated Soft Copper
Wire for Electrical Purposes
Copper Berrylium Alloy Rod and Bar (Metric)
Magnesium-Alloy Permanent Mold Castings
B 200
B 201
B 206/B 206M
B 208
B 21
B 211M
B 227
B 228
B 236
B 212
B 213
B 214
B 215
B 216
B 21M
B 22
B 221
B 236M
B 26/B 26M
B 302
B 306
B 221M
B 223
B 224
B 226
B 229
B 23
B 233
B 234
Electrodeposited Coatings of Lead and Lead-Tin Alloys
on Steel and Ferrous Alloys
Testing Chromate Coatings on Zinc and Cadmium
Surfaces
Copper-Nickel-Zinc [Nickle Silver] Wire and CopperNickel Alloy Wire
Preparing Tension Test Specimens for Copper Alloy
Sand Permanent Mold, Centrifugal, and Continuous
Castings
Naval Brass Rod, Bar, and Shapes
Specification for Aluminum and Aluminum Bars, Rod,
and Wire [Metric]
Hard-Drawn Copper-Clad Steel Wire
Concentric-Lay-Stranded Copper-Clad Steel Conductors
Specification for Aluminum-Bars for Electrical Purposes
(Bus Bars)
Apparent Density of Free-Floeing Metal Powders
Flow Rate of metal Powders
Sieve Analysis of Granular Metal Powders
Sampling Finished Lots of Metal Powders
Tough-Pitch Fire- Refined Copper - Refinery Shapes
Naval Brass Rod, Bar, and Shapes for Use in Screw
Machines [Metric]
Bronze Castings for Bridges and Turntables
Specification for Aluminum and Aluminum-Alloy
Extruded Bars, Rods, Wire, Profiles, and Tubes
Specification for Aluminum Bars for Electrical Purposes
(Bus Bars) [Metric]
Standard Specification for Aluminum-Alloy Sand
Castings
Threadless Copper Pipe, Standard Sizes
Specification for Copper Drainage Tube (DWV)
Aluminum and Aluminum-Alloy Extruded Bars, Rods,
Wire, Profiles, and Tubes (Metric)
Modulus of Elasticity of Thermostat Metals (Cantilever
Beam Method)
Coppers
Cored, Annular, Concentric - Lay Stranded Copper
Conductors
Concentric - Lay - Stranded Copper and Copper - Clad
Steel Composite Conductors
Standard Specification for White Metal Bearing Alloys
(Known Commercially as "Babbitt Metal")
Aluminum 1350 Drawing Stock for Electrical Purposes
Specification Aluminum-and Aluminum-Alloy Drawn
B 234M
B 237
B 240
B 241/B 241M
B 243
B 254
B 265
B 242
B 244
B 246
B 247
B 247M
B 248
B 308/B 308M
B 313/B 313M
B 333
B 367
B 250
B 248M
B 249
B 249M
B 250M
B 251
B 251M
Seamless Tubes for Condensers and Heat Exchangers
Specification for Aluminum and Aluminum-Alloy
Drawn Seamless Tubes for Condensers and Heat
Exchangers [Metric]
Refined Antimony
Standard Specification for Zinc and Zinc-Aluminum
(ZA) Alloys in Ingot Form for Foundry and Die
Castings
Specification for Aluminum and Aluminum-Alloy
Seamless Pipe and Seamless Extruded Tube
Standard Terminology of Powder Metallurgy
Preparation of and Electroplating on Stainless Steel
Titanium and Titanium Alloy Strip, Sheet, and Plate
Preparation of High-Carbon Steel for Electroplating
Measrement of Thickness of Anodic Coatings On
Aluminum and of Other Nonconductive Coatings
Nonmagnefic Basis Metals with Eddy-Current
Instruments
Specification for Tinned Hard-Drawn and MediumHard-Drawn Copper Wire for Electrical Purposes
Specification for Aluminum and Aluminum-Alloy Die
Forgings, Hand Forgings, and Rolled Ring Forgings
Specification for Aluminum and Aluminum-Alloy Die
Forgings, Hand Forgings, and Rolled Ring Forgings
[Metric]
Wrought Copper And Copper-Alloy Plate, Sheet, Strip,
and Rolled Bar
Specification for Aluminum-Alloy 6061-T6 Standard
Structural Profiles
Specification for Aluminum and Aluminum-Alloy
Round Welded Tubes
Nickel-Molybdenum Alloy Plate, Sheet and Strip
Titanium and Titanium Alloy Castings
General Requirements for Wrought Copper Alloy Wire
Wrought Copper and Copper-Alloy Plate, Sheet, Strip,
and Rolled Bar [Metric]
General Requirements for Wrought Copper-Alloy Rod,
Bar, and Shapes
General Requirements for Wrought Copper and CopperAlloy Rod, Bar, and Shapes (Metric)
General Requirements for Wrought Copper-Alloy Wire
General Requirements for Wrought Seamless Copper
and Copper-Alloy Tube
General Requirements for Wrought Seamless Copper
and Copper-Alloy Tube (Metric)
B 252
B 253
B 255
B 258
B 263
D 6145
B 267
B 271
B 272
B 275
B 276
B 277
B 279
B 280
B 283
B 281
B 298
B3
B 30
B 282
B 286
B 29
B 294
B 296
B 299
B 311
B 312
B 315
B 32
B 322
B 33
Preparation of Zinc Alloy Die Castings for
Electroplating and Conversion Coatings
Perparation of Aluminum Alloys for Electroplating
Sintered Bronze Structural Parts
Standard Nominal Diameters and Cross-Sectional Areas
of AWG Sizes of Solid Round Wires Used as Electrical
Conductors
Determination of Cross - Sectional Area of Stranded
Conductors
Monitoring Sediment in Watersheds
Wire for Use in Wire-Wound Resistors
Copper-Base Alloy Centrifugal Castings
Copper Flat Products with Finished (Rolled or Drawn)
Edges (Flat Wire and Strip)
Codification of Certain Nonferrous Metals and Alloys,
Cast and Wrought
Apparent Porosity in Cemented Carbides
Hardness of Electrical Contact Materials
Stiffness of Bare Soft Square and Rectangular Copper
and Aluminum Wire for Magnet Wire Fabrication
Standard Specification for Seamless Copper Tube for
Air Conditioning and Refrigeration Field Service
Specification for Copper and Copper-Alloy Die
Forgings (Hot-Pressed)
Preparation of Copper and Copper-Base Alloys for
Electroplating and Conversion Coatings
Silver-Coated Soft or Annealed Copper Wire
Standard Specification for Soft or Annealed Copper
Wire
Copper Alloys in Ingot Form
Sintered Brass Structural Parts
Copper Conductors for Use in Hookup Wire for
Electronic Equipment
Refined Lead
Hardness Testing of Cemented Carbides
Temper Designations of Magnesium Alloys, Cast and
wrought
Titanium Sponge
Density Determination for Powder Metallugy (P/M)
Materials Containing Less Than Two Percent Porosity
Green Strength for Compacted Metal Powder Specimens
Seamless Copper Alloy Pipe and Tube
Standard Specification for Solder Metal
Guide for Cleaning Metals Prior to Electroplating
Specification for Tinned Soft or Annealed Copper Wire
B 316/B 316M
B 317
B 319
B 320
B 324
B 327
B 329
B 330
B 331
D 6671
B 328
B 335
B 339
B 343
B 348
B 338
B 341/B 341M
B 344
B 345
B 345M
B 349/B 349M
B 350/B 350M
for Electrical Purposes
Specification for Aluminum and Aluminum-Alloy Rivet
and Cold-Heading Wire and Rods
Specification for Aluminum-Alloy Extruded Bar, Rod,
Tube, Pipe, and Structural Profiles for Electrical
Purposes (Bus Conductor)
Preparation of Lead Alloys for Electroplating
Preparation of Iron Castings for Electroplating
Standard Specification for Aluminum Rectangular and
Square Wire for Electrical Purposes
Standard Specification for Master Alloys Used in
Making Zinc Die Casting Alloys
Apparent Density of Metal Powders and Compounds
Using the Scott Volumeter
Standard Test Method for Fisher Number of Metal
Powders and Related Compounds
Compressibility Of Metal Powders in Uniaxial
Compaction
Standard Test Method for Mixed Mode I-Mode II
Interlaminar Fracture Toughness of Unidirectional Fiber
Reinforced Polymer Matrix Composites
Density, Oil Content, and Interconnected Porosity of
Sintered Metal Structural Parts and Oil-Impregnated
Bearings
Nickel-Molybdenum Alloy Rod
Standard Specification for Pig Tin
Preparation of Nickel for Electroplating with Nickel
Specification for Titanium and Titanium Alloy Bars and
Billets
Seamless and Welded Titanium and Titanium Alloy
Tubes for Condensers and Heat Exchangers
Specification for Aluminum-Coated (Aluminized) Steel
Core Wire for Aluminum Conductors, Steel Reinforced
[ACSR/AZ)
Drawn or Rolled Nickel-Chromium and NickelChromium-Iron Alloys for Electrical Heating Elements
Aluminium and Aluminium-Alloy Seamless Pipe and
Seamless Extruded Tube for Gas and Oil Transmission
and Distribution Piping Systems
Aluminium and Aluminium-Alloy Seamless Pipe and
Seamless Extruded Tube for Gas and Oil Transmission
and Distribution Piping System [Metric]
Zirconium Sponage and Other Forms of Virgin Metal
for Nuclear Application
Standard Specification for Zirconium and Zirconium
Alloy Ingots for Nuclear Application
B 351
B 352
B 353
B 354
B 365
B 355
B 359
B 359M
B 362
B 363
B 364
B 366
B 370
B 360
B 361
B 368
B 373
B 381
B 388
B 369
B 36/B 36M
B 37
B 371
B 372
B 374
B 379
B 380
B 386
Hot-Rolled and Cold-Finished Zirconium and
Zirconium Alloy Bars, Rod and Wire for Nuclear
Application
Zirconium and Zirconium Alloy Sheet, Strip, and Plate
for Nuclear Application
Standard Specification for Wrought Zirconium and
Zirconium Alloy Seamless and Welded Tubes for
Nuclear Service (Except Nuclear Fuel Cladding)
Uninsulated Metallic Electrical Conductors
Tantalum and Tantalum Alloy Rod and Wire
Nickel - Coated Soft or Annealed Copper Wire
Copper and Copper-Alloy Seamless Condensor and
Heat Exchanger Tubes With Integral Fins
Copper and Copper-Alloys Seamless Condenser and
Heat-Exchanger Tubes with Integral Fins [Metric]
Mechanical Torque Rate of Spiral Coils of Thermostat
Metal
Specification for Seamless and Welded Unalloyed
Titanium and Titanium Alloy Welding Fittings
Tantalum and Tantalum Alloy Ingots
Standard Specification for Factory-Made Wrought
Nickel and Nickel Alloy Fittings
Copper Sheet and Strip for Building Construction
Hard-Drawn Copper Capillary Tube for Restrictor
Applications
Factory-Made Wrought Aluminium and AluminiumAlloy Welding Fittings
Copper-Accelerated Acetic Acid-Salt Spray (Fog)
Testing (CASS) Test
Specification for Aluminum-Foil for Capacitors
Specification for Titanium and Titanium Alloy Forgings
Standard Specification for Thermostat Metal Sheet and
Strip
Copper-Nickel Alloy Castings
Brass Plate, Sheet, Strip, and Rolled Bar
Standard Specification for Aluminum for Use in Iron
and Steel Manufacture
Copper-Zinc-Silicon Alloy Rod
Seamless Copper and Copper-Alloy Rectangular
Waveguide Tube
Electroplating
Phosphorized Coppers - Refinery Shapes
Corrosion Testing of Decorative Eletrodeposited
Coatings by the Corrodkote Procedure
Molybdenum and Molybdenum Alloy Plate, Sheet,
B 391
B 392
B 393
B 394
B 387
B 389
B 39
B 400
B 401
B 415
B 390
B 395
B 395M
B 397
B 416
B 42
B 429
B 403
B 404/B 404M
B 406
B 407
B 408
B 409
B 411
B 412
B 413
B 417
Strip, and Foil
Specification for Niobium and Niobium Alloy Ingots
Specification for Niobium and Niobium Alloy Bar, Rod,
and Wire
Specification for Niobium and Niobium Alloy Strip,
Sheet, and Plate
Specification for Niobium and Niobium Alloy Seamless
and Welded Tubes
Molybdenum and Molybdenum Alloy Bar, Rod, and
Wire
Thermal Deflection Rate of Spiral and Helical Coils of
Thermostat Metal
Nickel
Standard Specification for Compact Round ConcentricLay-Stranded Aluminum 1350 Conductors
Compact Round Concentric-Lay-Stranded Aluminum
Conductors, Steel-Reinforced (ACSR/COMP)
Hard-Drawn Aluminum-Clad Steel Wire
Evaluating Apparent Grain Size and Distribution of
Cemented Tungsten Carbides
U-Bend Seamless Copper and Copper-Alloy HeatExchanger and Condenser Tubes
U-Bend Seamless Copper and Copper-Alloy HeatExchanger and Condenser Tubes [Metric]
Concentric - Lay - Stranded Aluminum - Alloy 5005 H19 Conductors
Concentric-Lay-Stranded Aluminum-Clad Steel
Conductors
Seamless Copper Pipe, Standard Sizes
Specification for Aluminum-Alloy Extruded Structural
Pipe and Tube
Magnesium-Alloy Investment Castings
Specification for Aluminum and Aluminum-Alloy
Seamless Condenser and Heat-Exchanger Tubes with
Integral Fins
Standard Test Method for Transverse Rupture Strength
of Cemented Carbides
Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
Nickel-Iron-Chromium Alloy Rod and Bar
Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
Copper-Nickel-Silicon Alloy Rod and Bar
Copper-Nickel-Silicon Alloy Wire
Refined Silver
Standard Test Method for Apparent Density of NonFree-Flowing Metal Powders Using the Carney Funnel
B 432
B 465
B 466/B 466M
B 418
B 424
B 427
B 428
B 43
B 422
B 423
B 425
B 430
B 434
B 438/B 438M
B 447
B 457
B 463
B 435
B 439
B 440
B 441
B 443
Copper and Copper Alloy Clad Steel Plate
Specification for Copper-Iron Alloy Plate, Sheet, Strip,
and Rolled Bar
Seamless Copper-Nickel Pipe and Tube
Standard Specification for Cast and Wrought Galvanic
Zinc Anodes
Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS
N08221)* Plate, Sheet, and Strip
Gear Bronze Alloy Castings
Angle of Twist in Rectangular and Square Copper and
Copper Alloy Tube
Seamless Red Brass Pipe, Standard Sizes
Specification for Copper-Aluminum-Silicon-Cobalt
Alloy, Copper-Nickel-Silicon-Magnesium Alloy,
Copper-Nickel-Silicon Alloy, Copper-NickelAluminum-Magnesium Alloy, and Copper-Nickel-Tin
Alloy Sheet and Strip
Nickel-Iron-Chromiumn-Molybdenum-Copper Alloys
(UNS N08825 and UNS N08221) Seamless Pipe and
Tube
Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS
N08221) Rod and Bar
Particle Size Distribution of Refractory Metal Powders
and Related Compounds by Turbidimetry
Specification for Nickel-Molybdenum-Chromium-Iron
Alloys (UNS N10003, UNS N10242) Plate, Sheet, and
Strip
Standard Specification for Sintered Bronze Bearings
(Oil-impregnated)
Standard Specification for Welded Copper Tube
Measurement of Impedance of Anodic Coatings on
Aluminum
UNS N08020, UNS N08026, and UNS N08024 Alloy
Plate, Sheet and Strip
Specification for UNS N06002, UNS N06230, UNS
N12160, and UNS R30556 Plate, Sheet, and Strip
Standard Specification for Iron-Base Sintered Bearings
(Oil-impregnated)
Cadmium
Copper-Cobalt-Berrilium (UNS No. C17500) and
Copper-Nickel-Beryllium (UNS No. C17510) Rod and
Bar
Standard Specification for Nickel-ChromiumMolybdenum-Columbium Alloy (UNS N06625) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS
N06219) Pl
B 444
B 446
B 449
B 452
B 453
B 511
B 633
B 635
B 453M
B 455
B 458
B 456
B 462
B 464
B 467
B 468
B 469
B 477
B 49
B 490
B 47
B 470
B 471
B 472
B 473
Standard Specification for Nickel-ChromiumMolybdenum-Columbium Alloys (UNS N06625) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS
N06219) P
Standard Specification for Nickel-ChromiumMolybdenum-Columbium Alloys (UNS N06625) and
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS
N06219) R
Chromates on Aluminum
Copper-Clad Steel Wire for Electronic Application
Copper-Zinc-Lead Alloy (Leaded Brass) Rod
Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
Electrodeposited Coatings of zinc on Iron and Steel
Specification for Coatings of Cadmium-Tin
Mechanically Deposited
Copper-Zinc-Lead Alloy (Leaded-Brass) Rod (Metric)
Copper-Zinc-Lead Alloy (Leaded Brass) Extruded
Shapes
Sintered Nickel Silver Structural Parts
Electrodeposited Coating of Copper plus Nickel Plus
Chromium and Nickel Plus Chromium
Standard Specification for Forged or Rolled UNS
N06030, UNS N06022, UNS N06200, UNS N08020,
UNS N08024, UNS N08026, UNS N08367, UNS
N10276, UNS N10665, UNS N10675 and UNS
Welded UNS N08020, UNS N08024, UNS N08026
Alloy Pipe
Welded Copper-Nickel Pipe
Welded UNS N08020, UNS N08024 and UNS N08026
Alloy Tubes
Seamless Copper Alloy Tubes for Pressure Applications
Gold-Silver-Nickel Electrical Contact Alloy
Copper Rod Drawing Stock for Electrical Purposes
Micrometer Bend Test for Ductility of Electrodeposits
Copper Trolley Wire
Bonded Copper Conductors for Use in Hookup Wires
for Electronic Equipment
UNS N08020, UNS N08026, and UNS N08024 Nickel
Alloy Spring Wire
Standard Specification for UNS N06030, UNS N06022,
UNS N06200, UNS N08020, UNS N08026, UNS
N08024, UNS N08926, UNS N08367, UNS N10276,
UNS N10665, UNS N10675, and UNS R2003
UNS N08020, UNS N08024, and UNS N08026 Nickel
Alloy Bar and Wire
B 474
B 475
B 476
B 478
B 493
B 494/B 494M
B 495
B 479
B 48
B 482
B 480
B 481
B 483/B 483M
B 487
B 488
B 489
B 491/B 491M
B 496
B 497
B 507
B 508
B 498/B 498M
B 499
B5
B 500/B 500M
Electric Fusion Welded UNS N08020, UNS N08024,
and UNS N08026 Nickel Alloy Pipe
UNS N08020, UNS N08024, and UNS N08026 Nickel
Alloy Round Weaving Wire
Standard Specification for General Requirements for
Wrought Precious Metal Electrical Contact Materials
Cross Curvature of Thermostat Metals
Zirconium and Zirconium Alloy Forgings
Primary Zirconium
Specification for Zirconium and Zirconium Alloy Ingots
Specification for Annealed Aluminum and AluminumAlloy Foil for Flexible Barrier, Food Contact, and Other
Applications
Specification for Soft Rectangular and Square Bare
Copper Wire for Electrical Conductors
Preparation of Tungsten and Tungsten Alloys for
Electroplating
Preparation of Magnesium and Magnesium Alloys for
Electroplating
Preparation of Titanium and Titanium Alloys for
Electroplating
Specification for Aluminum and Aluminum-Alloy
Drawn Tubes for General Purpose Applications
Measurement of Metal and Oxide Coating Thickness by
Microscopical Examination of a Cross Section
Electrodeposited Coatings of Gold for Engineering Uses
Bend Test for Ductility of Electrodeposited and
Autocatalytically Deposited Metal Coatings on Metals
Specification for Aluminum and Aluminum-Alloy
Extruded Round Tubes for General-Purpose
Applications
Standard Specification for Compact Round ConcentricLay-Stranded Copper Conductors
Standard Guide for Measuring Voltage Drop on Closed
Arcing Contacts
Design of Articles to Be Electroplated on Racks
Specification for Copper Alloy Strip for Flexible Metal
Hose
Zinc-Coated (Galvanized) Steel Core Wire for
Aluminum Conductors, Steel Reinforced (ACSR)
Measurement of Coating Thicknesses by the Magnetic
Method: Nonmagnetic Coatings on Magnetic Basis
Metals
Electrolytic Tough-Pitch Copper Refinery Shapes
Metallic Coated Stranded Steel Core for Aluminum
Conductors, Steel Reinforced (ACSR)
B 501
B 502
B 504
B 505
B 512
B 514
B 521
B 528
B 531
B 516
B 517
B 515
B 520
B 522
B 523/B 523M
B 524
B 524M
B 527
B 530
B 533
B 540
B 542
B 622
B 532
B 534
Silver-Coated, Copper-Clad Steel Wire for Electronic
Application
Aluminum-Clad Steel Core Wire for Aluminum
Conductors, Aluminum-Clad Steel Reinforced
Measurement of Thickness of Metallic Coatings by the
Coulmetric Method
Copper-Base Alloy Continuous Castings
Nickel-Chromium-Silicon Alloy (UNS N08330) Billets
and Bars
Welded Nickel-Iron-Chromium Alloy Pipe
Tantalum and Tantalum Alloy Seamless and Welded
Tubes
Test Method for Transverse Rupture Strength of Metal
Powder Specimens
Aluminum-Alloy 5005 Drawing Stock for Electrical
Purposes
Welded Nickel-Chromium-Iron Alloy (UNS N06600,
UNS N06603, UNS N06025, and UNS N06045 Tubes
Nickel-Chromium-Iron-Alloy (UNS N06600, UNS
N06603, UNS N06025, and UNS N06045) Pipe
Welded UNS N08800, UNS N08810, and UNS N08811
Alloy Tubes
Tin-Coated, Copper-Clad Steel Wire for Electronic
Application
Gold-Silver-Platinum Electrical Contact Alloy
Specification for Seamless and Welded Zirconium and
Zirconium Alloy Tube
Concentric - Lay - Stranded Aluminum Conductors.
Aluminum - Alloy Reinforced (ACSR, 1350/6201)
Concentric - Lay - Stranded Aluminum Conductors,
Aluminum - Alloy Reinforced (ACAR, 1350/6201)
[Metric]
Standard Test Method for Determination of Tap Density
of Metallic Powders and Compounds
Measurement of Coating Thichnesses by the Magnetic
Method: Electrodeposited Nickel Coatings on Magnetic
and Nonmagnetic Substrates
Peel Strength of Metal Electroplated Plastics
Palladium Electrical Contact Alloy
Standard Terminology relating to Electrical Contacts
and Their Use
Specification for Seamless Nickel and Nickel-Cobalt
Alloy Pipe and Tube
Appearnce of Electroplated Plastic Surfaces
Copper-Cobalt-Beryllium Alloy and Copper-NickelBeryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B 535
B 536
B 537
B 539
B 541
B 543
B 545
B 550/B 550M
B 547/B 547M
B 549
B 543M
B 546
B 548
B 551/B 551M
B 552
B 555
B 556
B 557
B 557M
B 560
B 564
B 568
B 558
Nickel-Iron-Chromium-Silicon Alloys (UNS N08330
and UNS N08332) Seamless Pipe and Tube
Nickel-Iron-Chromium-Silicon Alloys ( UNS N08330
and UNS N08332) Plate, Sheet, and Strip
Rating of Electroplated Panels Subjected to
Atmospheric Exposure
Measuring Contact Resistance of Electrical Connections
(Static Contacts)
Gold Electrical Contact Alloy
Welded Copper and Copper-Alloy Heat-Exchanger
Tube
Standard Specification for Electrodeposited Coatings of
Tin
Specification for Zirconium and Zirconium Alloy Bar
and Wire
Specification for Aluminum and Aluminum-Alloy
Formed and Arc-Welded Round Tube
Specification for Concentric-Lay-Stranded Aluminum
Conductors, Aluminum-Clad Steel Reinforced
(ACSR/AW)
Welded Copper and Copper-Alloy Heat-Exchanger
Tube (Metric)
Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS
N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS
N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe
Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS
N06045) Pipe
Ultrasonic Inspection of Aluminium-Alloy Plate for
Pressure Vessels
Specification for Zirconium and Zirconium Alloy Strip,
Sheet, and Plate
Seamless and Welded Copper-Nickel Tubes for Water
Desalting Plants
Measurement of Electrodeposited Metallic Coating
Thicknesses by the Dropping Test
Measurement of Thin Chromium Coatings by the Spot
Test
Tension Testing Wrought and Cast Aluminium- and
Magnesium -Alloy Products
Tension Testing Wrought and Cast Aluminum- and
Magnesium-Alloy Products (Metric)
Standard Specification for Modern Pewter Alloys
Standard Specification for Nickel Alloy Forgings
Measurement of Coating Thickness By X-Ray
Spectrometry
Preparation of Nickel Alloys for Electroplating
B 559
B 561
B 562
B 563
B 565
B 566
B 567
B 569
B 570
B 571
B 572
B 577
B 584
B 573
B 574
B 575
B 576
B 578
B 579
B 580
B 581
B 582
B 863
B 886
Nickel-Coated, Copper-Clad Steel Wire for Electronic
Application
Refined Platinum
Refined Gold
Standard Specification for Palladium-Silver-Copper
Electrical Contact Alloy
Standard Test Method for Shear Testing of Aluminum
and Aluminum-Alloy Rivets and Cold-Heading Wire
and Rods
Copper - Clad Aluminum Wire
Measurement of Coating Thickness by the Beta
Backscatter Method
Brass Strip in Narrow Widths and Light Gage for HeatExchanger Tubing
Copper-Beryllium Alloy Forgings and Extrusions
Standard Practice for Qualitative Adhesion Testing of
Metallic Coatings
UNS N06002, UNS N06230, UNS N12160, and UNS
R30556 Rod
Hydrogen Embrittlement of Copper
Copper Alloy Sand Castings for General Applications
Specification for Nickel-Molybdenum-Chromium-Iron
Alloys (UNS N10003, N10242) Rod
Low-Carbon Nickel-Molybdenum-Chromium, LowCarbon Nickel-Chromium-Molybdenum, Low-Carbon
Nickel-Molybdenum-Chromium-Tantalum, LowCarbon Nickel-Chromium-Molybdenum-Copper, and
Low-Carbon Nickel-Chromium-Molybdenum-Tungsten
Alloy
Low-Carbon Nickel-Molybdenum-Chromium, LowCarbon Nickel-Chromium-Molybdenum, Low-Carbon
Nickel-Chromium-Molybdenum-Copper, Low-Carbon
Nickel-Chromium-Molybdenum-Tantalum, and LowCarbon Nickel-Chromium-Molybdenum-Tungsten
Alloy
Arc Erosion Testing of Electrical Contact Materials
Microhardness of Electroplated Coatings
Electrodeposited Coatings of Tin-Lead Alloy (Solder
Plate)
Anodic Oxide Coatings on Aluminum
Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
Nickel-Chromium-Iron-Molybdenum-Copper Alloy
Plate, Sheet, and Strip
Specification Titanium and Titanium Alloy Wire
Determination of Magnetic Saturation (Ms) of
Cemented Carbides
B 587
B 588
B 589
B 591
B 592
B 593
B 594
B 595
B 596
B 597
B 598
B6
B 607
B 599
B 600
B 601
B 602
B 603
B 604
B 605
B 606
B 608
B 616
B 617
B 618
B 619
B 61
B 610
Welded Brass Tube
Measurement of Thickness of Transparent or Opaque
Coatings by Double-Beam-Interference Microscope
Technique
Refined Palladium
Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel
Alloys Plate, Sheet, Strip, and Rolled Bar
Copper-Zinc-Aluminium-Cobalt Plate, Sheet, Strip, and
Rolled Bar
Bending Fatigue Testing for Copper-Alloy Spring
Materials
Ultrasonic Inspection of Aluminium-Alloy Wrought
Products for Aerospace Applications
Sintered Aluminium Structural Parts
Gold-Copper Alloy Electrical Contact Material
Heat Treatment of Aluminium Alloys
Determining Offset Yield Strength in Tension for
Copper Alloys
Standard Specification for Zinc
Autocatalytic Nickel Boron Coatings for Engineering
Use
Nickel-Iron-Chromium-Molybdenum-Columbium
Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
Descaling and Cleaning Titanium and Titanium Alloy
Surfaces
Practice for Temper Designations for Copper and
Copper Alloys - Wrought and Cast
Attribute Sampling of Metallic and Inorganic Coatings
Drawn or Rolled Iron-Chromium-Aluminium Alloys for
Electrical Heating Elements
Decorative Electroplated Coatings of Copper Plus
Nickel Plus Chromium on Plastics
Electrodeposited Coatings of Tin-Nickel Alloy
High-Strength Zinc-Coated (Galvanized) Steel Core
Wire for Aluminum and Aluminum-Alloy Conductors,
Steel Reinforced
Welded Copper-Alloy Pipe
Specification for Refined Rhodium
Coin Silver Electrical Contact Alloy
Standard Specification for Aluminum-Alloy Investment
Castings
Specification for Welded Nickel and Nickel-Cobalt
Alloy Pipe
Steam or Valve Bronze Castings
Standard Test Method for Measuring Dimensional
B 611
B 612
B 613
B 614
B 615
B 62
B 620
B 621
B 624
B 625
B 626
B 628
B 632/B 632M
B 629
B 63
B 630
B 631
B 634
B 636
B 637
B 639
B 640
B 643
Changes of Metal Powder Specimens
Standard Test Method for Abrasive Wear Resistance of
Cemented Carbides
Standard Specification for Iron Bronze Sintered
Bearings (Oil-Impregnated)
Standard Guide for Preparing Specifications for
Miniature Brushes of Composite Materials for Sliding
Electric Contacts
Practice for Descaling and Cleaning Zirconium and
Zirconium Alloy Surfaces
Practice for Measuring Electrical Contact Noise in
Sliding Electrical Contacts
Composition Bronze or Ounce Metal Castings
Nickel-Iron-Chromium-Molybdenum Alloy (UNS
N08320) Plate, Sheet, and Strip
Nickel-Iron-Chromium-Molybdenum Alloy (UNS
N08320) Rod
High-Strength, High-Conductivity Copper-Alloy Wire
for Electronic Application
UNS N08904, UNS N08925, UNS N08031, UNS
N08932, UNS N08926 and UNS R20033 Plate, Sheet,
and Strip
Standard Specification for Welded Nickel and NickelCobalt Alloy Tube
Silver-Copper Eutectic Electrical Contact Alloy
Standard Specification for Aluminum-Alloy Rolled
Tread Plate
Preparation of Mollybdenum and Mollybdenum Alloys
for Electroplating
Resistivity of Metallically Conducting Resistance and
Contact Materials
Preparation of Chromium for Electroplating With
Chromium
Silver-Tungsten Electrical Contact Materials
Electrodeposited Coatings of Rhodium for Engineering
Use
Measurement of Internal Strees of Plated Metallic
Coatings with the Spiral Contractometer
Precipitation-Hardening Nickel Alloy Bars, Forgings,
and Forging Stock for High-Temperature Service
Precipitation Hardening Cobalt-Containing Alloys (UNS
R30155 and UNS R30186) Rod, Bar, Forgings, and
Forging Stock for High-Temperature Service
Standard Specification for Welded Copper Tube for Air
Conditioning and Refrigeration Service
Specification for Copper-Beryllium Alloy Seamless
B 645
B 659
B 644
B 646
B 647
B 648
B 649
B 652/B 652M
B 653/B 653M
B 662
B 650
B 651
B 699
B 702
B 654
B 655/B 655M
B 656
B 657
B 658/ B 658M
B 66
B 660
B 661
B 663
B 664
Tube
Plane Strain Fracture Toughness Testing of Aluminium
Alloys
Guide for Measuring Thickness of Metallic and
Inorganic Coatings
Copper Alloy Addition Agents
Fracture Toughness Testing of Aluminium Alloys
Standard Test Method for Indentation Hardness of
Aluminum Alloys by Means of a Webster Hardness
Gage
Standard Test Method for Indentation Hardness of
Aluminum Alloys by Means of a Barcol Impressor
N1-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904),
Ni-Fe-Cr-Mo-Cu-N Low Carbon Alloys (UNS N08925,
UNS N08031, and UNS N08926) and Cr-Ni-Fe-N
Low-Carbon Alloy (UNS R20033) Bar and Wire
Niobium-Hafnium Alloy Ingots
Specification for Seamless and Welded Zirconium and
Zirconium Alloy Welding Fittings
Specification for Silver-Molybdenum Electrical Contact
Material
Electrodeposited Engineering Chromium Coatings on
Ferrous Substrates
Measurement of Corrosion Sites in Nickel Plus
Chromium or Copper Plus Nickel Plus Chromium
Electroplated Surfaces withj the Double-Beam
Interference Microscope
Coatings of Cadmium Vacuum-Deposited on lron and
Steel
Copper-Tungsten Electrical Contact Material
Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
Niobium-Hafnium Alloy Bar, Rod, and Wire
Autocatalytic (Eletroless) Nickel-Phosphorus
Deposition on Metals for Engineering Use
Metallographic Determination of Microstructure in
Cemented Tungsten Carbides
Specification for Seamless and Welded Zirconium and
Zirconium Alloy Pipe
Bronze Castings for Steam Locomotive Wearing Parts
Packaging/Packing of Aluminium and Magnesium
Products
Heat Treatment of Magnesium Alloys
Specification for Silver-Tungsten Carbide Electrical
Contact Material
Standard Specification for 80 % Silver-20 % Graphite
Sliding Contact Material
B 666/B 666M
B 668
B 679
B 665
B 667
B 669
B 67
B 671
B 673
B 674
B 670
B 672
B 843
B 844
B 846
B 848
B 675
B 676
B 677
B 678
B 68
B 680
B 681
B 682
B 683
B 684
B 69
B 695
B 696
Identification Marking of Aluminium and Magnesium
Products
Specification for UNS N08028 Seamless Pipe and Tube
Electrodeposited Coatings of Palladium for Engineering
Use
Metallographic Sample Preparation of Cemented
Tugsten Carbides
Construction and Use of a Probe for Measuring
Electrical Contact Resistance
Zinc-Aluminium Alloys in Ingot Form for Foundry and
Die Castings
Car and Tender Journal Bearing, Lined
Refined Iridium
UNS N08904, UNS N08925, and UNS N08926 Welded
Pipe
UNS N08904, UNS N08925, and UNS N08926 Welded
Tube
Precipitation-Hardening Nickel Alloy (UNS N07718)
Plate, Sheet, and Strip for High-Temperature Service
Nickel-Iron-Chromium-Molybdenum-Columbium
Stabilized Alloy (UNS N08700) Bar and Wire
Magnesiium Alloys Anodes for Cathodic Protection
Silver-Tin Oxide Contact Material
Standard Terminology for Copper and Copper Alloys
Specification for Powder Forged (P/F) Ferrous
Structural Parts
UNS N08367 Welded Pipe
UNS N08367 Welded Tube
UNS N08904, UNS N08925, and UNS N08926
Seamless Pipe and Tube
Solderability of Metallic-Coated Products
Seamless Copper Tube, Bright Annealed
Seal Quality of Anodic Coatings on Aluminum by Acid
Dissolution
Measurement of Thickness of Anodic Coatings on
Aluminum and of Other Transparent Coatings on
Opaque Surfaces Using the Light-Section Microscope
Standard Specification for Standard Metric Sizes of
Electrical Conductors
Pure Palladium Electrical Contact Material
Platinum-Iridium Electrical Contact Materials
Standard Specification for Rolled Zinc
Specification for Coatings of Zinc Mechanically
Deposited on Iron and Steel
Specification for Coatings of Cadmium Mechanically
B 685
B 686
B 687
B 689
B 68M
B 692
B 688
B 690
B 691
D 6146
B 693
B 694
B 697
B 698
B 70
B 700
B 701
B 703
B 704
B 705
B 708
B 717
B 709
B 710
B 711
B 713
B 714
B 718
Deposited
Palladium-Copper Electrical Contact Material
Aluminum Alloy Castings, High-Strength
Brass-, Copper-, and Chromium-Plated Pipe Nipples
Electroplated Engineering Nickel Coatings
Seamless Copper Tube, Bright Annealed [Metric]
Standard Specification for 75 % Silver - 25 % Graphite
Sliding Contact Material
Chromium-Nickel-Molybdenum-Iron (UNS N08366
and UNS N08367) Plate, Sheet, and Strip
Iron-Nickel-Chromium-Molybdenum Alloys (UNS
N08360 and UNS N08367) Seamless Pipe and Tube
Iron-Nickel-Chromium-Molybdenum Alloys (UNS
N08366 and UNS N08367)
Monitoring Aqueous Nutrients in Watersheds
Silver-Nickel Electricsl Contact Materials
Copper, Copper-Alloy, and Copper-Clad Stainless Steel
(CCS), and Copper-Clad Alloy Steel (CAS) Sheet and
Strip for Electrical Cable Shielding
Selection of Sampling Plans for Inspection of
Electrodeposited Metallic and Inorganic Coatings
Seamless Copper and Copper Alloy Plumbing Pipe and
Tube
Change of Resistance with Temperature of Metallic
Materials for Electrical Heating
Electrodeposited Coatings of Silver for Engineering Use
Concentric - Lay - Stranded Self - Damping Aluminum
Conductors, Steel Reinforced (ACSR/SD)
Apparent Density of Poeders Using Arnold Meter
Specification for Welded UNS N06625, UNS N06219
and UNS N08825 Alloy Tubes
Specification for Nickel-Alloy (UNS N06625, N06219
and N08825) Welded Pipe
Tantalum and Tantalum Alloy Plate, Sheet, and Strip
Specification for Refined Ruthenium
Iron-Nickel-Chromium-Molybdenum Alloy (UNS
N08028)* Plate, Sheet, and Strip
Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
Concentric - Lay - Stranded Aluminum - alloy
Conductors, Steel Reinforced (AACSR) (6201)
Terms Relating to Superconductors
D-C Critical Current of Composite Superconductors
Standard Specification for Nickel-ChromiumMolybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS
N06333) Plate, Sheet, and Strip
B 712
B 715
B 719
B 720
B 743
B 753
B 769
B 721
B 722
B 723
B 724
B 725
B 726
B 727
B 729
B 730
B 774
B 777
B 820
B 731
B 733
B 734
B 735
B 736
B 737
B 738
Determination of Sodium and Potassium Content for
Silver-Cadmium Oxide Contact Materials
Sintered Copper Structural Parts for Electrical
Conductivity Applications
Specification for Nickel-Chromium-MolybdenumCobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
Seamless UNS N08310 Tube
Specification for Seamless Copper Tube in Coils
Standard Specification for Thermostat Component
Alloys
Standard Test Method for Shear Testing of Aluminum
Alloys
Microhardness an dCase Depth of Powder
Metallurgy(P/M) parts
Standard Specification for Nickel-ChromiumMolybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS
N06333) Seamless Pipe and Tube
Standard Specification for Nickel-ChromiumMolybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS
N06333) Welded Pipe
Indentation Hardness of Aluminium Alloys by Means of
a Newage Portable Non-Caliper-Type Instrument
Welded Nickel (UNS N0220/UNS N02201) and Nickel
Copper Alloy (UNS N04400) Pipe
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-IronSilicon Alloy (UNS N06333) Welded Tube
Preparation of Plastics Materials for Electroplating
Standard Specification for Seamless UNS N08020, UNS
N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
Welded Nickel (UNS N02200/UNS N02201) and Niskel
Copper Alloy (UNS N04400) Tube
Standard Specification for Low Melting Point Alloys
Specification for Tungsten Base, High-Density Metal
Bend Test for Formability of Copper Alloy Spring
Materials
60% Palladium-40% Silver Electrical Contact Material
Autocatalytic Nickel-Phosphorus Coatings on Metals
Electrodeposited Copper for Engineering Uses
Test Method for Porosity in Gold Coatings on Metal
Substrates by Nitric Acid Vapor
Specification for Aluminum, Aluminum Alloy and
Aluminum-Clad Steel Cable Shielding Stock
Specification for Hot-Rolled and/or Cold-Finished
Hafnium Rod and Wire
Fine-Wire Bunch-Stranded and Rope-Lay Bunch-
B 739
B 740
B 741
B 742
F 1791
B 744/B 744M
B 745/B 745M
B 746/B 746M
B 747
B 748
B 749
B 75
B 750
B 751
B 752
B 754
B 755
B 756
B 757
B 758
B 759
B 75M
B 76
Stranded Copper Conductors for Use as Electrical
Conductors
Nickel-Iron-Chromium-Silicon Alloy Welded Tube
Copper-Nickel-Tin Spinodal Alloy Strip
Test Method for Porosity In Gold Coatings On Metal
Substrates By Paper Electrography
Standard Specification for Fine Silver Electrical Contact
Fabricated Material
Filters Used in Air or Nitrogen Systems
Aluminium Alloy Sheet for Corrugated Aluminium Pipe
Corrugated Aluminium Pipe for Sewers and Drains
Standard Specification for Corrugated Aluminum Alloy
Structural Plate for Field-Bolted Pipe, Pipe-Arches, and
Arches
Copper Zirconium Alloy Sheet and Strip
Measurement of Thickness of Metallic Coatings by
Measurement of Cross Section with a Scanning Electron
Microscope
Lead and Lead Alloy Strip, Sheet, and Plate Products
Seamless Copper Tube
Standard Specification for Zinc-5 % AluminumMischmetal Alloy in Ingot Form for Hot-Dip Coatings
General Requirements for Nickel and Nickel Alloy
Welded Tube
Castings, Zirconium-Base, Corrosion Resistant, for
General Application
Measuring and Recording the Deviations from Flatness
in Copper and Copper Alloy Strips
Standard Specification for Nickel-ChromiumMolybdenum-Tungsten Alloys (UNS N06110) Plate,
Sheet, and Strip
Standard Specification for Nickel-ChromiumMolybdenum-Tungsten Alloy (UNS N06110) Rod and
Bar
Standard Specification for Nickel-ChromiumMolybdenum-Tungsten-Alloys (UNS N06110) Welded
Pipe
Standard Specification for Nickel-ChromiumMolybdenum-Tungsten Alloys (UNS N06110) Welded
Tube
Standard Specification for Nickel-ChromiumMolybdenum-Tungsten Alloys (UNS N06110) Pipe and
Tube
Seamless Copper Tube [Metric]
Accelerated Life of Nickel-Chromium and NickelChromium-Iron Alloys for Electrical Heating
B 760
B 761
B 762
B 763
B 764
B 765
B 766
B 767
B 768
B 77
B 770
B 771
B 772
B 773
B 775
B 776
B 780
B 80
B 816
B 817
B 781
B 778
B 779
B 78
B 782
B 783
Tungsten Plate, Sheet, and Foil
Particle Size Distribution of Refractory Metals and Their
Compounds by X-Ray Monitoring of Gravity
Sedimentation
Variables sampling of Metallic and Inorganic Coatings
Copper Alloy Sand Castings for Valve Application
Simultaneous Thickness and Electrochemical Potential
Determination of Individual Layers in in Multilayer
Nickel Deposit (STEP Test)
Selection of Porosity Tests for Electrodeposits and
Related Metallic Coatings
Electrodeposited Coatings of Cadmium
Determining Mass per Unit Area of Electrodeposited
and related Coatings Coatings by Gravimetric and Other
Chemical Analysis Procedures
Copper- Cobalt- Berryllium Alloy Strip and Sheet
Thermolectric Power of Electrical-Resistance Alloys
Copper-Berylium Alloy Sand Castings for General
Applications
Short Rod Fracture Toughness of Cemented Carbides
Specifying the Chemical Compositions for Electrical
Contact Materials (Arcing and Nonarcing)
Ultrasonic C-Scan Bond Evaluation of Brazed or
Welded Electrical Contact Assemblies
Specification for General Requirements for Nickel and
Nickel Alloy Welded Pipe
Standard Specification for Hafnium and Hafnium Alloy
Strip, Sheet, and Plate
75% Silver, 24.5% Copper, 0.5% Nickel Electrical
Contact Alloy
Standard Specification for Magnesium-Alloy Sand
Castings
Specification for Coatings of Cadmium-Zinc
Mechanically Deposited
Powder Metallurgy (P/M) Titanium Alloy Sructural
Components
Silver-Cadmium Oxide Contact Material
Shaped Wire Compact Concentric - Lay - Stranded
Aluminum Conductors, (AAC/TW)
Shaped Wire Compact Concentric - Lay - Stranded
Aluminum Conductors, Steel Reinforced (ACSR/TW)
Electrical Heating
Standard Specification for Iron Graphite Sintered
Bearings (Oil-Impregnated)
Specification for Materials for Ferrous Powder
B 784
B 786
B 787
B 788/B 788M
B 789/B 789M
B 790/B 790M
B 791
B 792
B 793
B 794
B 795
B 796
B 797
B 798
B 799
B8
B 800
B 801
B 802/B 802M
F 1792
Metallurgy (P/M) Structural Parts
Standard Specification for Modified Concentric-LayStranded Copper Conductors for Use in Insulated
Electrical Cables
Specification for 19 Wire Combination Unilay-Stranded
Aluminum Conductors for Subsequent Insulation
19 Wire Combination Unilay - Stranded Copper
Conductors for Subsequent Insulation
Practice for Installing Factory-Made Corrugated
Aluminum Culverts and Storm Sewer Pipe
Installing Corrugated Aluminum Structural Plate Pipe
for Culverts and Sewers
Structural Design of Corrugated Aluminum Pipe, PipeArches, and Arches for Culverts, Storm Sewers, and
Other Buried Conduits
Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
Standard Specification for Zinc Alloys in Ingot Form for
Slush Casting
Standard Specification for Zinc Casting Alloy Ingot for
Sheet Metal Forming Dies and Plastic Injection Molds
Durability Wear Testing of Separable Electrical
Connector Systems Using Electrical Resistance
Measurements
Determining the Percentage of Alloyed or Unalloyed
Iron Contamination Present in Power Forged (P/F) Steel
Parts
Test Method for Nonmetallic Inclusion Level of Powder
Forged (P/F) Steel Parts
Surface Finger Oxide Penetration Depth and Presence of
Interparticle Oxide Networks in Powder Forged (P/F)
Steel Parts
Test Method for Porosity in Gold or Palladium Coatings
on Metal Substrates by Gel-Bulk Electrography
Test Method for Porosity in Gold and Palladium
Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
Concentric-Lay-Stranded Copper Conductors, Hard,
Medium-Hard , or Soft
Specification for 8000 Series Aluminum Alloy Wire for
Electrical Purposes - Annealed and Intermediate
Tempers
Concentric-Lay-Stranded Conductors of 8000 Series
Aluminum Alloy for Subsequent Covering or Insulation
Zinc - 5 % Aluminum-Mischmetal Alloy-Coated Steel
Core Wire for Aluminum Conductors, Steel Reinforced
(ACSR)
Special Requirements for Valves Used in Gaseous
B 803
B 804
B 805
B 806
B 807
B 808
B 809
B 810
B 811
B 812
B 813
B 814
B 815
B 818
B 819
B 821
B 822
B 827
B 840
B 841
B 824
B 828
Oxygen Service
High-Strength Zinc - 5% Aluminum-Mischmetal AlloyCoated Steel Core Wire for Aluminum and AluminumAlloy Conductors, Steel Reinforced
UNS N08367 and UNS N08926 Welded Pipe
Precipitation Hardening Nickel Alloys UNS N07716,
N07725, N07773, N07776, and N09777 Bar and Wire
Copper Alloy Permanent Mold Casting for General
Applications
Extrusion Press Solution Heat Treatment for Aluminium
Alloys
Monitoring of Atmospheric Corrosion Chambers by
Quartz Crystal Microbalances
Porosity in Coatings by Himid Sulfur Vapor ("Flowersof-Sulfur")
Standard Test Method for Calibration of Atmospheric
Corrosion Test Chambers by Change in Mass of Copper
Coupons
Wrought Zirconium Alloy Seamless Tubes for Nuclear
Reactor Fuel Cladding
Resistance to Environmental Degradation of Electrical
Pressure Connections Involving Aluminium and
Intended for Residential Applications
Liquid and Paste Fluxes for Soldering Applications of
Copper and Copper Tube
Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy
(UNS N06920) Plate, Sheet, and Strip
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy
(UNS R312333) Rod
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy
(UNS R31233) Plate, Sheet, and Strip
Standard Specification for Seamless Copper Tube for
Medical Gas Systems
Liquid Dispersion of Metal Powder and Related
Compounds for Particle Size Analysis
Particle Size Distribution of Metal Powders and Related
Compounds by Light Scattering
Conducting Mixed Flowing Gas (MFG) Environmental
Tests
Specification for Electrodeposited Coatings of Zinc
Cobalt Alloy Deposits
Specification for Electrodeposited Coatings of Zinc
Nickel Alloy Deposits
General Requirements for Copper Alloy Castings
Making Capillary Joints By Soldering of Copper and
Copper Alloy Tube and Fittings
B 823
B 825
B 826
B 829
B 830
B 831
B 832
B 833
B 834
B 842
B 835
B 836
B 837
B 839
B 84
B 845
B 849
B 85
B 850
B 854
B 861
B 852
B 853
B 851
Materials for Nonferrous Powder Metallurgy (P/M)
Structural Parts
Coulometric Reduction of Surface Films on Metallic
Test Samples
Monitoring Atmospheric Corrosion Test
General Requirements for Nickel and Nickel Alloys
Seamless Pipe and Tube
Uniform Test Methods and Frequency
Shear Testing of Thin Aluminium Alloy Products
Electroforming with Nickel and Copper
Standard Specification for Zinc and Zinc Alloy Wire for
Thermal Spraying (Metallizing)
Pressure Consolidated Powder Metallurgy Iron-NickelChromium-Molybdenum (UNS N08367) and NickelChromium-Molybdenum-Columbium (Nb) (UNS
N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
Specification for Electrodeposited Coatings of Zinc Iron
Alloy Deposits
Specification for Compact Round Stranded Copper
Conductors Using Single Input Wire Construction
Specification for Compact Round Stranded Aluminum
Conductors Using Single Input Wire Construction
Seamless Copper Tube for Natural Gas Liquified
Petroleum (LP) Gas Distribution Systems
Residual Embrittlement in Metallic Coated, Externally
Treaded Articles, Fasteners, and Rod-Inclined Wedge
Method
Temperature-Resistance Constants of Alloy Wires for
Precision Resistors
Mixed Flowing Gas (MFG) Tests for Electrical Contacts
Pre-Treatments of Iron or Steel for Reducing Risk of
Hydrogen Embrittlement
Aluminum-Alloy Die Castings
Post-Coating Treatments of Steel for Reducing the Risk
of Hydrogen Embrittlement
Measuring Electrical Contact Intermittences
Specification for Titanium and Titanium Alloy Seamless
Pipe
Standard Specification for Continuous Galvanizing
Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of
Sheet Steel
Powder Metallurgy (P/M) Boron Stainless Steel
Structural Components
Automated Controlled Shot Peening of Metallic Articles
Prior to Nickel, Autocatalytic Nickel, or Chromium
Plating, or as Final Finish
B 855
B 856
B 857
B 858M
B 859
B 86
B 860
B 862
B 864/B 864M
B 88
B 881
B 865
B 866
B 867
B 868
B 869
B 870
B 882
B 883
B 885
B 880
B 884
B 887
B 872
Volumetric Flow Rate of Metal Powders Using the
Arnold Meter and Hall Funnel
Standard Specification for Concentric-Lay-Stranded
Aluminum Conductors, Coated Steel Supported (ACSS)
Standard Specification for Shaped Wire Compact
Concentric-Lay-Stranded Aluminum Conductors,
Coated-Steel Supported (ACSS/TW)
Determination of Susceptibility to Stress Corrosion
Cracking in Copper Alloys Using an Ammonia Vapor
Test
De-Agglomeration Metal Powders and Their
Compounds Prior to Particla Size Analysys
Standard Specification for Zinc and Zinc-Aluminum
(ZA) Alloy Foundry and Die Castings
Standard Specification for Zinc Master Alloys for Use in
Hot Dip Galvanizing
Titanium and Titanium-Alloy Welded Pipe
Specification for Corrugated Aluminum Box Culverts
Standard Specification for Seamless Copper Water Tube
Aluminum- and Magnesium-Alloy Products
Precipitation Hardening Nickel-Copper-Aluminum
Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and
Forging Stock
Gross Defects and Mechanical Damage in Metallic
Coatings by Polysulfide Immirsion
Electrodeposited Coatings of Palladium-Nickel for
Engineering Use
Contact Performance Classification of Electrical
Connection Systems
Specification for Copper- Clad Steel Electricl Conductor
for CATV Drop Wire
Specification for Copper- Beryllium Alloy Forgings and
Extrusions Alloys C17500 and C17510
Specification for Pre-Patinated Copper for Architectural
Applications
Specification for Metal Injection Molding (MIM),
Ferrous Structural Parts
Presence of Foreigh Matter on Printed Wiring Board
Contacts
Chemical Check Analysis Limits for Nickel, Nickel
Alloys and Cobalt Alloys
Specification for Niobium-Titanium Alloy Billets, Bar,
and Rod for Superconducting Applications
Determination of Coercivity (Hcs) of Cemented
Carbides
Specification for Precipitation- Hardening Nickel- Iron-
B 873
B 874
B 875
B 876
B 877
B 878
B 879
B 888
B 889
B 893
B 894
B 88M
B 890
B 891
B 892
B9
B 90/B 90M
B 91
B 92/B 92M
B 93/B 93M
B 94
B 98/B 98M
B 99/B 99M
C 1017/C 1017M
Chromium-Columbium [Nb]-Tatanium-Aluminum
Alloy [UNS N09909] Plate, Sheet, and Strip
Test Method for Measuring Volume of Apparent
Density Cup Used in Test Methods B 212, B329, and
B417
Chromium Diffusion Coating Applied by Pack
Cementation Process
Aluminum Diffusion Coating Applied by Pack
Cementation Process
Borated Dispersion Strengthened Copper Plate, Sheet,
Strip, and Rolled Bar for Nuclear Application
Gross Defects and Mechanical Damage in Metallic
Coatings by the Phosphomolybdic Acid (PMA) Method
Nanosecond Event Detection for Electrical Contacts and
Connectors
Applying Non-Electrolytic Conversion Coatings on
Magnesium Alloys
Copper Alloy Strip for Use in the Manufacture of
Electrical Connectors or Spring Contacts
Solid Hard-Drawn Aluminum Wire for Electrical
Purposes
Hard-Coat Anodizing of Magnesium for Engineering
Applications
Standard Specification for Zinc-Copper-Aluminum
Alloy Die Castings
Seamless Copper Water Tube [Metric]
Determination of Metallic Constituents of Tungsten
Alloys and Tungsten Hardmetals by X-Ray
Fluorescence Spectrometry
Seamless and Welded Titanium and Titanium Alloy
Condenser and Heat Exchanger Tubes With Integral
Fins
Standard Specification for Zinc - Copper - Aluminum
Alloy in Ingot Form for Die Castings
Bronze Trolley Wire
Magnesium-Alloy Sheet and Plate
Magnesium-Alloy Forgings
Standard Specification for Unalloyed Magnesium Ingot
and Stick For Remelting
Magnesium Alloys in Ingot Form Sand Castings,
Permanent Mold Castings, and Die Castings
Standard Specification for Magnesium-Alloy Die
Castings
Copper-Silicon Alloy Rod, Bar and Shapes
Copper-Silicon Alloy Wire for General Applications
Chemical Admixtures for Use in Producing Flowing
C 1019
C 1047
C 1000
C 1001
C 1002
C 1004
C 1005
C 1006
C 1007
C 1008
C 1009
C 1010
C 1073
C 1074
C 1012
C 1014
C 1015
C 1016
C 1018
C 1020
C 1021
C 1023
C 1022
C 1081
Concrete
Standard Test Method for Sampling and Testing Grout
Specification for Accessories for Gypsum Wallboard
and Gypsum Veneer Base
Radiochemical Determination of Uranium Isotopes in
Soil by Alpha Spectrometry
Radiochemical Determination of Plutonium in Soil by
Alpha Spectroscopy
Steel Drill Screws for the Application of Gypsum Panel
Products or Metal Plaster Bases
LWR Spent Fuel Receiving and Storage
Reference Masses and Devices for Determining Mass
for Use in the Physical Testing of Hydraulic Cements
Splitting Tensile Strength of Masonry Units
Specification for Installation of Load Bearing
(Transverse and Axial) Steel Studs and Related
Accessories
Sintered (Uranium-Plutonium) Dioxide Pellets -- Fast
Reactor Fuel
Establishing a Quality Assurance Program for
Analytical Chemistry Laboratories Within the Nuclear
Industry
Acceptance, Checkout, and Pre-Operational Testing of a
Nuclear Fuels Reprocessing Facility
Hydraulic Activity of Ground Slag by Reaction with
Alkali
Estimating Concrete Strength by the Maturity Method
Length Change of Hydraulic-Cement Mortars Exposed
to a Sulfate Solution
Specification for Spray-Applied Mineral Fiber Thermal
and Sound Absorbing Insulation
Installation of Cellulosic and Mineral Fiber Loose-Fill
Thermal Insulation
Determination of Water Absorption of Sealant Backing
(Joint-Filler) Material
Flexural Toughness and First-Crack Strength of Fiber
Reinforced Concrete (Using Beam with Third-Point
Loading)
Light Water Reactor Fuel Processing
Laboratories Engaged in Testing of Building Sealants
Practice for Labeling Ceramic Art Materials for Chronic
Adverse Health Hazards
Chemical and Atomic Absorption Analysis of UraniumOre Concentrate
Asbestos-Cement Corrugated Fill for Use in Cooling
Towers
C 1082
C 1141
C 1145
C 1025
C 1026
C 1027
C 1028
C 1029
C 1030
C 1031
C 1032
C 1033
C 1157M
C 1377
C 1378
C 1381
C 1034
C 1035
C 1036
C 1040
C 1042
C 1043
F 1830
C 1044
C 1037
C 1038
Specification for Asbestos-Cement Flat Sheet for
Cooling Tower Fill
Standard Specification for Admixtures for Shotcrete
Standard Terminology of Advanced Ceramics
Modulus of Rupture in Bending of Electrode Graphite
Measuring the Resistance of Ceramic Tile to FreezeThaw Cycling
Determining Visible Abrasion Resistance of Glazed
Ceramic Tile
Determining the Static Coefficient of Friction of
Ceramic Tile and Other Like Surfaces by the Horizontal
Dynamometer Pull-Meter Method
Spray-Applied Rigid Cellular Polyurethane Thermal
Insulation
Determination of Plutonium Isotopic Composition by
Gamma-Ray Spectrometry
Nuclear-Grade Aluminium Oxide Powder
Woven Wire Plaster Base
Standard Test Method for Steady-State Heat Transfer
Properties of Pipe Insulation Installed Vertically
Performance Specification for Blended Hydraulic
Cement
Test Method for Calibration of Surface/Stress
Measuring Devices
Test Method for Determination of Resistance to Staining
Specification for Mplded Glass Fiber Reinforced
Gypsum Parts
Lead and Cadmium Extracted from Glazed Ceramic
Cookware
Lead and Cadmium from Glazed Ceramic Cookware
Flat Glass
Test Methods for Density of Unhardened and Hardened
Concrete In Place By Nuclear Methods
Bond Strength of Latex Systems Used with Concrete by
Slant Shear
Guarded-Hot-Plate Design Using Circular Line-Heat
Sources
Selection of Blood for In Vitro Evaluation of Blood
Pumps
Using the Guarded-Hot-Plate Apparatus or Thin-Heater
Apparatus in the Single-Sided Mode
Inspection of Underground Precast Concrete Utility
Structures
Expansion of Portland Cement Mortar Bars Stored in
Water
C 1039
C 1041
C 1045
C 1046
C 1048
C 1049
C 1050
C 1051
C 1052
C 1053
C 1054
C 1059
C 1072
C 1055
C 1057
C 1058
C 1060
C 1063
C 1065
C 1066
C 1067
C 1068
C 1069
C 1070
C 1071
Apparent Porosity, Apparent Specific Gravity, and Bulk
Density of Graphite Electrodes
In-Situ Measurements of Heat Flux in Industrial
Thermal Insulation Using Heat Flux Transducers
Standard Practice for Calculating Thermal Transmission
Properties Under Steady-State Conditions
Standard Practice for In-Situ Measurement of Heat Flux
and Temperature on Building Envelope Components
Heat - Treated Flat Glass - Kind HS, Kind FT Coated
and Uncoated Glass
Installation of Granular Loose-Fill Thermal Insulation
Rigid Cellular Polystyrene-Cellulosic Fiber Composite
Roof Insulation
Sodium (Na) as a Coolant for Liquid Metal-Cooled
Reactors
Bulk Sampling of Liquid Uranium Hexafluoride
Borosilicate Glass Pipe and Fittings for Drain, Waste,
and Vent (DWV) Applications
Pressing and Drying Refractory Plastic and Ramming
Mix Specimens
Latex Agents for Bonding Fresh to Hardened Concrete
Standard Test Method for Measurement of Masonry
Flexural Bond Strength
Heated System Surface Conditions That Produce
Contant Burn Injuries
Determination of Skin Contact Temperature from
Heated Surfaces Using a Mathematical Model and
Thermesthesiometer
Selecting Temperatures for Evaluating and Reporting
Thermal Properties of Thermal Insulation
Thermographic Inspection of Insulation Installations in
Envelope Cavities of Frame Buildings
Installation of Lathing and Furring to Receive Interior
and Exterior Portland Cement-Based Plaster
Nuclear-Grade Zirconium Oxide Powder
Nuclear-Grade Zirconium Oxide Pellets
Conducting a Ruggedness or Screening Program for
Test Methods for Construction Materials
Qualification of Measurement Methods by a Laboratory
Within the Nuclear Industry
Specific Surface Area of Alumina or Quartz by Nitrogen
Adsorption
Determining Particle Size Distribution of Alumina or
Quartz by Light Scattering
Standard Specification for Fibrous Glass Duct Lining
Insulation (Thermal and Sound Absorbing Material)
C 1075
C 1076
C 1077
C 1078
C 1079
C 108
C 1080
C 1083
C 1094
C 11
C 1084
C 1086
C 1087
C 1088
C 1089
C 1091
C 1093
C 1090
C 1096
C 1097
C 110
C 1100
C 1140
C 1098
C 1099
C 109/C 109M
C 1101/C 1101M
Sampling Uranium-Ore Concentrate
Nuclear-Grade Hafnium Oxide Pellets
Standard Practice for Laboratories Testing Concrete and
Concrete Aggregates for Use in Construction and
Criteria for Laboratory Evaluation
Determining the Cement Content of Freshly Mixed
Concrete
Determining the Water Content of Freshly Mixed
Concrete
Heat Transmission
Specification for Asbestos-Cement Products Other Than
Fill For Cooling Towers
Water Absorption of Cellular Elastomeric Gaskets and
Sealing Meterials
Standard Guide for Flexible Removable Insulation
Covers
Gypsum and Related Building Materials and Systems
Portland-Cement Content of Hardened HydraulicCement Concrete
Glass Fiber Felt Thermal Insulation
Determining Compatibility of Liquid-Applied Sealants
with Accessories Used in Strength Glazing Systems
Standard Specification for Thin Veneer Brick Units
Made From Clay or Shale
Spun Cast Prestressed Concrete Poles
Hydrostatic Infiltration and Exfiltration Testing of
Vitrified Clay Lines
Accreditation of Testing Agencies for Unit Masonry`
Measuring Changes in Height of Cylindrical Specimens
from Hydraulic-Cement Grout
Determination of Wood Fiber in Asbestos Cement
Standard Specification for Hydrated Lime for Use in
Asphaltic-Concrete Mixtures
Test Methods for Physical Testing of Quicklime,
Hydrated Lime, and Limestone
Ribbon Thermal Shock Testing of Refractory Materials
Preparing and Testing Specimens from Shotcrete Test
Panels
Nuclear-Grade Hafnium Oxide Powder
Modulus of Rupture of Carbon-Containing Refractory
Materials at Elevated Temperatures
Compressive Strength of Hydraulic Cement Mortars
(Using 2-in. or [50-mm] Cube Specimens)
Standard Test Methods for Classifying the Flexibility or
Rigidity of Mineral Fiber Blanket and Board Insulation
C 1102
C 1103
C 1103M
C 1104/C 1104M
C 1105
C 1106
C 1107
C 1108
C 1115
C 1116
C 1109
C 1110
C 1111
C 1114
C 1118
C 1119
C 1112
C 1113
C 1117
C 1120
C 1130
C 114
C 1121
Time of Setting of Portland-Cement Pastes Containing
Quick-Setting Accelerating Admixtures for Shotcrete by
the Use of Gillmore Needles
Standard Practice for Joint Acceptance Testing of
Installed Precast Concrete Pipe Sewer Lines
Standard Practice for Joint Acceptance Testing of
Installed Precast Concrete Pipe Sewer Lines [Metric]
Determining the Water Vapor Sorption of Unfaced
Mineral Fiber Insulation
Length Change of Concrete Due to Alkali-Carbonate
Rock Reaction
Standard Test Methods for Chemical Resistance and
Physical Properties of Carbon Brick
Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
Plutonium by Controlled-Potential Colometry
Specification for Dense Elastomeric Silicone Rubber
Gaskets and Accessories
Standard Specification for Fiber-Reinforced Concrete
and Shotcrete
Analysis of Aqueous Leachates from Nuclear Waste
Materials Using Inductively Coupled Plasma-Atomic
Emission Spectroscopy
Sample Preparation for X-Ray Emission Spectrometric
Analysis of Uranium in Ores Using the Glass Fusion or
Pressed Powder Method
Determining Elements in Waste Streams by Inductively
Coupled Plasma-Atomic Emission Spectroscopy
Standard Test Method for Steady-State Thermal
Transmission Properties by Means of the Thin-Heater
Apparatus
Guide for Selecting Components for WavelengthDispersive X-Ray Fluorescence (XRF) Systems
Vacuum Drainage of Asbestos-Cement Mixes
Application of Radiation Monitors to the Control and
Physical Security of Special Nuclear Material
Thermal Conductivity of Refractories by Hot Wire
(Platinum Resistance Thermometer Technique
Time of Setting of Shotcrete Mixtures by Penetration
Resistance
Wash Test of Asbestos
Standard Practice for Calibrating Thin Heat Flux
Transducers
Test Methods for Chemical Analysis of Hydraulic
Cement
Turner and Newall (T and N) Wet-Length Classification
of Asbestos
C 1122
C 1123
C 1124
C 1125
C 1126
C 1127
C 1128
C 1129
C 113
D 6512
C 1131
C 1132
C 1134
C 1136
C 1137
C 1138
C 1133
C 1135
C 1139
C 1142
C 1143
C 1144
C 1146
C 1147
C 1148
C 1149
Wet Volume of Asbestos
Water in Engine Coolant Concentrate by the Karl
Fischer Reagent Method
Kerosene Retention of Asbestos
Penetration Index of Asbestos
Standard Specification for Faced or Unfaced Rigid
Cellular Phenolic Thermal Insulation
Use of High Solids Content, Cold Liquid-Applied
Elastomeric Waterproofing Membrane Integral Wearing
Surface
Preparation of Working Reference Materials for Use in
the Analysis of Nuclear Fuel Cycle Materials
Standard Practice for Estimation of Heat Savings by
Adding Thermal Insulation to Bare Valves and Flanges
Reheat Change of Refractory Brick
D 6512 - 00
Standard Practice for Least Cost (Life Cycle) Analysis
of Concrete Culvert, Storm Sewer, and Sanitary Sewer
Systems
Calibration of the Heat Flow Meter Apparatus
Standard Test Method for Water Retention of Rigid
Thermal Insulations Following Partial Immersion
Standard Specification for Flexible, Low Permeance
Vapor Retarders for Thermal Insulation
Degradation of Fine Aggregate Due to Attrition
Abrasion Resistance of Concrete (Underwater Method)
Nondestructive Assay of Special Nuclear Material in
Low-Density Scrap and Waste by Segmented Passive
Gamma-Ray Scanning
Determining Tensile Adhesion Properties of Structural
Sealants
Fibrous Glass Thermal Insulation and Sound Absorbing
Blanket and Board for Military Applications
Extended Life Mortar for Unit Masonry
Helium for Use as a Cover Gas for Liquid Sodium
Splittig Tensile Strength for Brittle Nuclear Waste
Forms
Prefabricated Panel Insulation Systems for Ducts and
Equipment Operating at Temperatures Above Ambient
Air
Determining the Short Term Tensile Weld Strength of
Chemical-Resistant Thermoplastics
Measuring the Drying Shrinkage of Masonry Mortar
Self-Supported Spray Applied Cellulosic
Thermal/Acoustical Insulation
C 115
C 1150
C 1154
C 1157
C 1151
C 1152
C 1153
C 1155
C 1158
C 1159
C 1160
D 6667
C 1156
C 1161
C 1162
C 1163
C 1180
C 1184
C 1164
C 1165
C 1166
C 1167
C 1168
C 1169
C 117
C 1170
Fineness of Portland Cement by the Turbidimeter
Break-Off Number of Concrete
Non-Asbestos Fibre-Reinforced Cement Products
Standard Performance Specification for Hydraulic
Cement
Evaluating the Effectiveness of Materials for Curing
Concrete
Acid-Soluble Chloride in Mortar and Concrete
Lacation of Wet Insulation in Roofing Systems using
Infrared Imaging
Determining Thermal Resistance of Building Envelope
Components From In-Situ Data
Installation and Use of Radiant Barrier Systems (RBS)
in Building Constructions
Sulfur Polymer Cement and Sulfur Modifier for Use in
Chemiccal-Resistant, Rigid Sulfur Concrete
Chemical Resistant Carbon Brick
Standard Test Method for Determination of Total
Volatile Sulfur in Gaseous Hydrocarbons and Liquefied
Petroleum Gases by Ultraviolet Fluorescence
Establishing Calibration for a Measurement Method
Used to Analyse Nuclear Fuel Cycle Materials
Flexural Strength of Advanced Ceramis at Ambient
Temperature
Loose Density of Asbestos
Mounting Actinides for Alpha Spectrometry Using
Neodymium Fluoride
Standard Terminology of Mortar and Grout for Unit
Masonry
Standard Specification for Structural Silicone Sealants
Practice for Evaluation of Limestone or Lime
Uniformity From a Single Source
Test Method for Determining Plutonium by ControlledPotential Coulometry in H2SO4 at a Platinum Working
Electrode
Flame Propagation of Dense and Cellular Elastomeric
Gaskets and Accessories
Clay Roof Tiles
Standard Practice for Preparation and Dissolution of
Plutonium Materials for Analysis
Laboratory Evaluation of Automatic Pedestrian SNM
Monitor Performance
Materials Finer than 75-um (No. 200) Sieve in Mineral
Aggregates by Washing
Determining Consistency and Density of Roller-
C 1171
C 1172
C 1186
C 119
C 1193
C 121
C 1173
C 1174
C 1175
C 1176
C 118
C 1181
C 1177/C 1177M
C 1178/C 1178M
C 1179
C 1182
C 1375
C 1376
C 1183
C 1185
C 1187
C 1188
C 1189
C 118M
C 1190
C 1191
Compacted Concrete Using a Vibrating Table
Quantitativity Measuring the Effect of Thermal Cycling
on Refractories
Laminated Architectural Flat Glass
Specification for Flat Non-Asbestos Fiber-Cement
Sheets
Standard Terminology Relating to Dimension Stone
Guide for Use of Joint Sealants
Test Method for Water Absorption of Slate
Flexible Transition Couplings for Underground Piping
Systems
Prediction of the Long-Term Behavior of Materials,
Including Waste Forms, Used in Engineered Barrier
Systems (EBS) for Geological Disposal of High-Level
Radioactive Waste
Test Methods and Standards for Nondestructive Testing
of Advanced Ceramics
Making Roller-Compacted Concrete in Cylinder Molds
Using a Vibrating Table
Concrete Pipe for Irrigation or Drainage
Standard Test Methods Compressive Creep of
Chemical-Resistant Polymer Machinery Grouts
Glass Mat Gypsum Substrate for Use as Sheathing
Glass Mat Water-Resistant Gypsum Backing Panel
Oxidatives Mass Loss of Manufactured Carbon and
Graphite Materials in Air
Determining the Particle Size Distribution of Alumina
by Centrifugal Photosendimentation
Substrates Used in Testing Building Seals and Sealants
Specification for Pyrolytic and Vacuum Deposition
Coatings on Glass
Extrusion Rate of Elastomeric Sealants
Sampling and Testing Non-Asbestos Fiber-Cement Flat
Sheet, Roofing and Siding Shingles, and Clapboards
Establishing Surveillance Test Program for BoronBased Neutron Absorbing Material Systems for Use in
Nuclear Spent Fuel Storage Racks
Establishing a Quality Assurance Program for Uranium
Conversion Facilities
Calibrating Automatic Pedestrian Oedestrian SNM
Monitors
Concrete Pipe for Irrigation or Drainage [Metric]
Standard Practice for Location of Test Specimens from
Magnesia-Carbon and Impregnated Burned Basic Brick
Safe Use and Handling of Ceramic Clays and Slips
C 1192
C 1194
C 12
C 1209
C 1195
C 1198
C 1199
C 28/C 28M
C 1208/C 1208M
C 1211
C 1196
C 1197
C 120
C 1201
C 1202
C 1203
C 1204
C 1205
C 1206
C 1207
C 1210
C 1212
C 1213
C 1214
Safe Spraying of Ceramic Glazes
Test Method for Compressive Strength of Architectural
Cast Stone
Installing Vitrified Clay Pape Lines
Standard Terminology of Concrete Masonry Units and
Related Units
Test Method for Absorption of Architectural Cast Stone
Standard Test Method for Dynamic Young's Modulus,
Shear Modulus, and Poisson's Ratio for Advanced
Ceramics by Sonic Resonance
Standard Test Method for Measuring the Steady-State
Thermal Transmittance of Fenestration Systems Using
Hot Box Methods
C 28/C 28M - 00
Vitrified Clay Pipe and Joints for Use in
Microtunneling, Sliplining, Pipe Bursting and Tunnels
Flexural Strength of Advanced Ceramics at Elevated
Temperatures
In Situ Compressive Stress Within Solid Unit Masonry
Estimated Using Flatjack Measurements
In Situ Measurement of Masonry Deformability
Properties Using the Flatjack Method
Flexure Testing of Slate (Modulus of Rupture, Modulus
of Elasticity)
Structural Performance of Exterior Dimension Stone
Cladding Systems by Uniform Air Pressure Difference
Electrical Indication of Concrete's Ability to Resist
Chloride Ion Penetration
Quantitative Determination of Alkali Resistance of a
Ceramic-Glass Enamel
Uranium in trhe Presence of Plutonium by Iron(II)
Reduction in Phosphoric Acid Followed by
Chrominum(VI) Titration
Radiochemical Determination of Americium-241 in Soil
by Alpha Spectrometry
Plutonium by Iron(II)/Chromium(VI) Amperometric
Titration
Nondestructive Assay of Plutonium in Scrap and Waste
by Passive Neutron Coincidence Counting
Establishing a Measurement System Quality Control
Program for Analytical Chemistry Laboratories Within
the Nuclear Industry
Fabricating Ceramic Reference Specimens Containing
Seeded Voids
Precast Concrete Products
Standard Test Method for Concrete Pipe Sewerlines by
C 1227
C 1232
C 1233
C 1214M
C 1215
C 1218/C 1218M
C 1219
C 1220
C 1216
C 1217
C 1221
C 1222
C 1223
C 1281
C 1283
C 1284
C 1224
C 1225
C 1226
C 1228
C 1229
C 123
C 1230
C 1231
C 1234
C 1235
Negative Air Pressure (Vacuum) Test Method
Standard Specification for Precast Concrete Septic
Tanks
Terminology of Masonry
Determining Equivalent Boron Contents of Nuclear
Materials
Standard Test Method for Concrete Pipe Sewerlines by
Negative Air Pressure (Vacuum) Test Method [Metric]
Preparing and Interpreting Precision and Bias
Statements in Test Method Standards Used in the
Nuclear Industry
Water-Soluble Chloride in Mortar and Concrete
Arsenic in Uranium Hexafluoride
Static Leaching of Monolithic Waste Forms for Disposal
of Radioactive Waste
Adhesion and Cohesion of One-Part Elastomeric
Solvent Release Sealants
Design of Equipment for Processing Nuclear and
Radioactive Materials
Nondestructive Analysis of Special Nuclear Materials in
Homogeneous Solutions by Gamma-Ray Spectrometry
Evaluation of Laboratories Testing Hydraulic Cement
Testing of Glass Exudation from AZS Fusion-Cast
Refractories
Preformed Tape Sealants for Glazing Applications
Installing Clay Flue Lining
Practice for Electrodeposition of the Actinides for Alpha
Spectrometry
Reflective Insulation for Building Applications
Standard Specification for Non-Asbestos Fiber-Cement
Roofing Shingles, Shakes, and Slates
Soluble Chlorides in Asbestos
Preparing Coupons for Flexural and Washout Tests on
Glass Fiber Reinforced Concrete
Determination of Glass Fiber Content in Glass Fiber
Reinforced Concrete (GFRC) (Washout Test)
Lightweight Particles in Aggregate
Performing Tension Tests on Glass-Fiber Reinforced
Concrete (GFRC) Bonding Pads
Use of Unbonded Caps in Determination of
Compressive Strength of Hardened Concrete Cylinders
Preparation of Oils and Oily Waste Samples by HighPressure, High-Temperature Digestion for Trace
Element Determinations
Plutonium by Titanium (III)/Cerium (IV) Titration
C 125
C 1256
C 1236
C 1237
C 1238
C 1239
C 1240
C 1241
C 1242
C 1243
C 1244
C 1244M
C 1245
C 1246
C 1247
C 1248
C 1249
C 1250
C 1251
C 1252
C 1253
C 1254
C 1255
C 1257
Standard Terminology Relating to Concrete and
Concrete Aggregates
Interpreting Glass Fracture Surface Features
In-Plant Performance Evaluation of Automatic Vehicle
SNM Monitors
In-Plant Performance Evaluation of Hand-Held SNM
Monitors
Installation of Walk-Through Metal Detectors
Standard Practice for Reporting Uniaxial Strength Data
and Estimating Weibull Distribution Parameters for
Advanced Ceramics
Specification for Use of Silica Fume as a Mineral
Admixture in Hydraulic-Cement Concrete, Mortar, and
Grout
Volume Shrinkage of Latex Sealants During Cure
Standard Guide for Design, Selection, and Installation of
Stone Anchors and Anchoring Systems
Test Method for Relative Resistance to Deep Abrasive
Wear of Unglazed Ceramic Tile by Rotating Disc
Standard Test Method for Concrete Sewer Manholes by
the Negative Air Pressure (Vacuum) Test
Concrete Sewer Manholes by the Negative Air Pressure
(Vacuum) Test {Metric}
Determining Bond Strength Between Hardened RollerCompacted Concrete and Other Hardened Cementitious
Mixtures (Point Load Test)
Effects of Heat Aging on Weight Loss, Cracking, and
Chalking of Elastomeric Sealants Cure
Durability of Sealants Exposed to Continuous
Immersion in Liquids
Staining of Porous Substrate by Joint Sealants
Standard Guide for Secondary Seal for Sealed Insulating
Glass Units for Structural Sealant Glazing Applications
Nonvolatile Content of Cold Liquid-Applied
Elastomeric Waterproofing Membrane
Determination of Specific Surface Area of Advanced
Ceramic Materials by Gas Adsorption
Uncompacted Void Content of Fine Aggregate (as
Influenced by Particle Shape, Surface Texture, and
Grading)
Determining Outgassing Potential of Sealant Backing
Determination of Uranium in Mineral Acids by X-Ray
Fluorescence
Analysis of Uranium and Thorium in Soils by Energy
Dispersive X-Ray Fluorescence Spectroscopy
Standard Test Method for Accelerated Weathering of
C 1258
C 1259
C 1261
C 1262
C 1263
C 126
C 1260
C 1265
C 1272
C 1278/C 1278M
C 1280
C 1266
C 1267
C 1268
C 1269
C 127
C 1270
C 1271
C 1273
C 1274
C 1275
D 6529
C 1276
Solvent-Release-Type Sealants
Standard Test Method for Elevated Temperature and
Humidity Resistance of Vapor Retarders for Insulation
Standard Test Method for Dynamic Young's Modulus,
Shear Modulus, and Poisson's Ratio for Advanced
Ceramics by Impulse Excitation of Vibration
Firebox Brick for Residential Fireplaces
Evaluating the Freeze-Thaw Durability of Manufactured
Concrete Masonry Units and Related Concrete Units
Standard Test Method for Thermal Integrity of Flexible
Water Vapor Retarders
Ceramic Glazed Structural Clay Facing Tile, Facing
Brick, and Solid Masonry Units
Potential Alkali Reactivity of Aggregates (Mortar-Bar
Method)
Determining Tensile Properties of an Insulating Glass
Edge Seal for Structural Applications
Specification for Heavy Vehicular Paving Brick
Standard Specification for Fiber-Reinforced Gypsum
Panel
Specification for Application of Gypsum Sheathing
Flow Characteristics of Preformed Tape Sealants
Uranium by Iron(II) Reduction in Phosphoric Acid
Followed by Chromium(VI) Titration in the Presence of
Vanadium
Test Method for Quantitative Determination of
Americium 241 in Plutonium by Gamma-Ray
Spectrometry
Adjusting the Operational Sensitivity Setting of In-Plant
Walk-Through Metal Detectors
Standard Test Method for Specific Gravity and
Absorption of Coarse Aggregate
Detection Sensitivity Mapping of In-Plant WalkThrough Metal Detectors
X-ray Spectrometric Analysis of Lime and Limestone
Standard Test Method for Tensile Strength of
Monolithic Advanced Ceramics at Ambient
Temperatures
Standard Test Method for Advanced Ceramic Specific
Surface Area by Physical Adsorption
Monotomic Tensile Strength Testing of Continuous
Fiber- Reinforced Advanced Ceramics with Solid
Rectangular Cross-Section Specimens at Ambient
Temperatures
D 6529 - 00
Standard Test Method for Measuring the Viscosity of
C 1277
C 1279
C 128
C 1282
C 1286
C 1285
C 1287
C 1288
C 129
C 1314
C 1319
C 1289
C 1290
C 1291
C 1292
C 1293
C 1294
C 1295
C 1296
C 1297
C 1298
Mold Powders Above Their Melting Point Using a
Rotational Viscometer
Shielded Couplings Joining Hubless Cast Iron Soil Pipe
Fittings
Standard Test Method for Non-Destructive Photoelastic
Measurement of Edge and Surface Stresses in Annealed,
Heat-Strengthened, and Fully Tempere
Specific Gravity and Absorption of Fine Aggregate
Standard Test Method for Determining the Particle Size
Distribution of Advanced Ceramics by Centrifugal
Photosedimentation
Advanced Ceramics
Determining Chemical Durability of Nuclear Waste
Glasses: The Product Consistency Test (PCT)
Determination of Impurities in Uranium Dioxide by
Inductively Coupled Plasma Mass Spectrometry
Discrete Non-Asbestos Fiber-Cement Interior Substrate
Sheets
Standard Specification for Nonloadbearing Concrete
Masonry Units
Standard Test Method for Compressive Strength of
Masonry Prisms
Concrete Grid Paving Units
Faced Ridged Cellular Polyisocyanurate Thermal
Insulation Board
Standard Specification for Flexible Fibrous Glass
Blanket Insulation Used to Externally Insulate HVAC
Ducts
Standard Test Method for Elevated Temperature Tensile
Creep Strain, Creep Strain Rate, and Creep Time-toFailure for Advanced Monolithic Cerami
Test Method for Shear Strength of Continuous FiberReinforced Advanced Ceramics at Ambient
Temperatures
Standard Test Method for Determination of Length
Change of Concrete Due to Alkali-Silica Reaction
Compatibility of Insulating Glass Edge Sealants with
Liquid-Applied Glazing Materials
Gamma Energy Emission from Fission Products in
Uranium Hexafluoride and Uranyl Nitrate Solution
Standard Test Method for Determination of Sulfur in
Uranium Oxides and Uranyl Nitrate Solutions by X-Ray
Fluorescence (XRF)
Qualification of Laboratory Analysts for the Analysis of
Nuclear Fuel Cycle Materials
Design and Construction of Brick Liners for Industrial
C 1326
C 1327
C 1328
C 1329
C 1299
C 1300
C 1303
C 1304
C 1305
C 1306
C 1301
C 1302
C 1307
C 1308
C 1309
C 131
C 1310
C 1311
C 1312
C 1313
C 1315
Chemneys
Knoop Indentation Hardness of Advanced Ceramics
Vickers Indentation Hardness of Advanced Ceramics
Specification for Plastic (Stucco) Cement
Specification for Mortar Cement
Use in Selection of Liquid-Applied Sealants
Linear Thermal Expansion of Glaze Frits and Ceramic
Whiteware Materials by the Interferometric Method
Test Method for Estimating the Long-Term Change in
the Thermal Resistance of Unfaced Rigid Closed-Cell
Plastic Foams by Slicing and Scaling Under Controlled
Laboratory Conditions
Standard Test Method for Assessing the Odor Emission
of Thermal Insulation Materials
Test Method for Crack Bridging Ability of LiquidApplied Waterproofing Membrane
Test Method for Hydrostatic Pressure Resistance of a
Liquid-Applied Waterproofing Membrane
Standard Test Method for Major and Trace Elements in
Limestone and Lime by Inductively Coupled PlasmaAtomic Emission Spectroscopy (ICP) and Atomic
Absorption (AA)
Guide for Selection and Use of Keywords for Thermal
Insulation Test Method and Standards
Plutonium Assay by Plutonium (III) Diode Array
Spectrophotometry
Accelerated Leach Test for Diffusive Releases from
Solidified Waste and a Computer Program to Model
Diffusive, Fractional Leaching from Cylindrical Waste
Forms
Practice for Performance Evaluation of In-Plant WalkThrough Metal Detectors
Resistance to Degradation of Small-Size Coarse
Aggregate by Abrasion and Impact in the Los Angeles
Machine
Standard Test Method for Determining Radionuclides in
Soils by Inductively Coupled Plasma-Mass
Spectrometry Using Flow Injection Prec
Solvent Release Sealants
Making and Conditioning Chemical-Resistant Sulfer
Polymer Cement Concrete Test Specimens in the
Laboratory
Standard Specification for Sheet Radiant Barriers for
Building Construction Applications
Specification for Liquid Membrane-Forming
Compounds Having Special Properties for Curing and
C 1316
C 1317
C 1318
C 1320
C 1321
C 1322
C 1323
C 1324
C 1334
C 1355/C 1355M
C 1325
C 133
C 1330
C 1357
C 1372
C 1335
C 1336
C 1337
C 1338
C 1339
C 134
C 1341
Sealing Concrete
Nondestructive Assay of Nuclear Material in Scrap and
Waste by Passive-Active
Dissolution of Silicate or Acid-Resistant Matrix
Samples
Standard Test Method for Determination of Total
Neutralizing Capability and Dissolved Calcium and
Magnesium Oxide in Lime for Flue Ga
Instalation of Mineral Fiber Batt and Blanket Thermal
Insulation for Light Frame Construction
Installation and Use of Interior Radiation Control
Coating Systems [IRCCS] in Building Construction
Fractography and Characterization of Fracture Origins
in Advanced Ceramics
Ultimate Strength of Advanced Ceramics with
Diametrally Compressed C-Ring Specimens at Ambient
Temperature
Examination and Analysis of Hardened Masonry Mortar
Specification for Uranium Oxides with a 235U Content
of Less Than 5 % for Dissolution Prior to Conversion to
Nuclear-Grade Uranium Dioxide
Glass Fiber Reinforced Gypsum Composites
Fiber-Mat Reinforced Non-Asbestos Cement Interior
Substrate Sheets
Cold Crushing Strength and Modulus of Rupture of
Refractories
Cylindrical Sealant Backing for Use with Cold Liquid
Applied Sealants
Test Method for Evaluating Masonary Bond Strength
Specification for Segmental Retaining Wall Units
Measuring Non-Fibrous Content of Man-Made Rock
and Slag Mineral Fiber Insulation
Fabricating Non-Oxide Ceramic Reference Specimens
Containing Seeded Inclusions
Standard Test Method for Creep and Creep Rupture of
Continuous Fiber-Reinforced Ceramic Composites
under Tensile Loading at Elevated Temperatures
Test Method for Determining Fungi Resistance of
Insulation Materials and Facings
Flowability and Bearing Area of Chemical-Resistant
Polymer Machinery Grouts
Standard Test Methods for Size, Dimensional
Measurements, and Bulk Density of Refractory Brick
and Insulating Firebrick
Test Method for Flexural Properties of Continuous
Fiber-Reinforced Advanced Ceramic Composites
C 1343
C 1344
C 1345
C 1373
C 1346
C 1347
C 1348
C 1349
C 1353
D 6530
C 1358
C 135
C 1350M
C 1351M
C 1354
C 1359
C 136
C 1360
C 1361
C 1362
C 1364
Determination of Low Concentrations of Uranium in
Oils and Organic Liquids by X-ray Fluorescence
Isotopic Analysis of Uranium Hexafluoride by SingleStandard Gas Source Mass Spectrometer Method
Analysis of Total and Isotopic Uranium and Total
Thorium in Soils by Inductively Coupled Plasma-Mass
Spectrometry
Selecting Jacketing Materials for Thermal Insulation
Dissolution of UF6 from P-10 Tubes
Preparation and Dissolution of Uranium Materials for
Analysis
Standard Specification for Blended Uranium Oxides
with a&sup235;U Content of Less Than 5 % for Direct
Hydrogen Reduction to Nuclear Grade Uraniu
Architectural Flat Glass Clad Polycarbonate
Using the Taber Abraser for Abrasion Resistance of
Dimension Stone Subjected to Foot Traffic
D 6530 - 00
Standard Test Method for Monotonic Compressive
Strength Testing of Continuous Fiber-Reinforced
Advanced Ceramics with Solid Rectangular Crosssection Spe
True Specific Gravity of Refractory Materials by Water
Immersion
Measurement of Viscosity of Glass Between Softening
Point and Annealing Range (Approximately 10 8 Pa. s
to Approximately 10 13 Pa. s) by Beam Bending
(Metric)
Measurement of Viscosity of Glass Between 10 4 Pa. s
and 10 8 Pa.s by Viscous Compression of a Solid Right
Cylinder [Metric]
Strength of Individual Stone Anchorages in Dimension
Stone
Monotonic Tensile Strength Testing of Continuous
Fiber-Reinforced Advanced Ceramics With Solid
Rectangular Cross-section Specimens at Elevated
Temperatures
Sieve Analysis of Fine and Coarse Aggregates
Constant-Amplitude, Axial, Tension-Tension Cyclic
Fatigue of Continuous Fibre-Reinforced Advanced
Ceramics at Ambinent Temperatures
Constant-Amplitude, Axial, Tension-Tension Cyclic
Fatigue of Advanced Ceramics at Ambinent
Temperatures
Flow of Freshly Mixed Hydraulic Cement Concrete
Specification for Architectural Cast Stone
C 1365
C 1367
C 1368
C 1369
C 1370
C 1371
C 1374
C 1379
C 138
C 1380
C 1382
C 1383
C 1384
C 1385
C 1386
C 1387
C 1389
C 139
C 1390
C 1391
C 1398
C 1399
Proportion of Phases in Portland Cement and PortlandCement Clinker Using X-Ray Powder Diffraction
Analysis
Test Method for Heat Resistance of Hot-Applied
Sealants Under Dead Load
Standard Test Method for Determination of Slow Crack
Growth Parameters of Advanced Ceramics by Constant
Stress-Rate Flexural Testing at Ambient Tempera
Secondary Edge Sealants for Structurally Glazed
Insulating Glass Units
Standard Test Method for Determining the Chemical
Resistance of Aggregates for Use in Chemical-Resistant
Sulfur Polymer Cement Concrete and Other ChemicalResistant Polyme
Determination of Emittance of Material Near Room
Temperature Using Portable Emissometers
Determination of Installed Thickness of Pneumatically
Applied Loose-Fill Building Insulation
Method for Analysis of Urine for Uranium-235 and
Uranium-238 Isotopes by Inductively Coupled PlasmaMass Spectrometry
Standard Test Method for Unit Weight, Yield, and Air
Content (Gravimetric) of Concrete
Determination of Uranium Content and Isotopic
Composition by Isotope Dilution Mass Spectrometry
Determining Tensile Adhesion Properties of Sealants
When Used in Exterior Insulation and Finish Systems
(EIFS) Joints
Measuring The P-Wave Speed and the Thickness of
Concrete Plates Using the Impact-echo Method
Standard Specification for Admixtures for Masonry
Mortars
Practice for Sampling Materials for Shotcrete
Precast Autoclaved Aerated Concrete (PAAC) Wall
Construction Units
Determination of Technetium-99 in Soil
Water Penetration and Leakage Through Masonry
Concrete Masonry Units for Construction of Catch
Basins and Manholes
Test Methods for flexural Bond Strength on Masonry
Test Method for Diagonal Tension (Shear) in Masonry
Assemblages
Standard Test Method for The Laboratory
Determination of the Time of Setting of HydraulicCement Mortars Containing Additives for Shotcrete by
Test Method for Obtaining Average Residual-Strength
C 14
C 140
C 1400
C 1402
C 1403
C 1404/C 1404M
C 1405
C 1408
C 1409
C 141
C 1410
C 1411
C 1416
C 146
C 150
C 1412
C 1413
C 1415
C 1417M
C 1419
C 142
C 1420
C 144
C 147
of Fiber-Reinforced Concrete
Concrete Sewer, Storm drain, and Culvert Pipe
Standard Test Methods for Sampling and Testing
Concrete Masonry Units and Related Units
Standard Guide for Reduction of Efflorescence Potential
in New Masonry Walls
High-Resolution Gamma-Ray Spectrometry of Soil
Samples
Standard Test Method for Rate of Water Absorption of
Masonry Mortars
Bond Strength of Adhesive Systems Used With
Concrete as Measured by Direct Tension
Standard Specification for Glazed Brick (Single Fired,
Solid Brick Units)
Carbon (Total) in Uranium Oxide Powders and Pellets
By Direct Combustion-Infrared Detection Method
Measuring and Estimating Quantities of Insulated Piping
and Components
Hydraulic Hydrated Lime for Structural Purposes
Cellular Melamine Thermal and Sound-Absorbing
Insulation
Standard Practice for The Ion Exchange Separation of
Uranium and Plutonium Prior to Isotopic Analysis
Uranium Analysis in Natural and Waste Water by X-ray
Fluorescence
Test Methods for Chemical Analysis of Glass Sand
Standard Specification for Portland Cement
Microwave Oven Dissolution of Glass Containing
Radioactive and Mixed Wastes
Isotopic Analysis of Hydrolyzed Uranium Hexafluoride
and Uranyl Nitrate Solutions by Thermal Ionization
Mass Spectrometry
Standard Test Method for ²³&sup8;Pu
Isotopic Abundance By Alpha Spectrometry
Manufacture of Reinforced Concrete Sewer, Storm
Drain, and Culvert Pipe for Direct Design (Metric)
Sonic Velocity in Refractory Materials at Room
Temperature and Its Use in Obtaining an Approximate
Young's Modulus
Clay Lumps and Friable Particles in Aggregates
Selection, Removal, and Shipment of Manufactured
Masonry Units Placed in Usage
Aggregate for Masonry Mortar
Standard Test Methods for Internal Pressure Strength of
Glass Containers
C 148
C 149
C 14M
C 151
C 162
C 163
C 155
C 156
C 158
C 159
C 16
C 165
C 166
C 167
C 168
C 169
C 170
C 185
C 187
C 171
C 172
C 177
C 182
C 183
C 191
C 173
C 174/C 174M
C 179
C 181
C 195
Polariscopic Examination of Glass Containers
Standard Test Method for Thermal Shock Resistance of
Glass Containers
Concrete Sewer, Storm Drain, and Culvert Pipe [Metric]
Test Method for Autoclave Expansion of Portland
Cement
Glass and Glass Products
Mixing Thermal Insulating Cement Samples
Classification of Insulating Firebrick
Water Retention by Concrete Curing Materials
Standard Test Methods for Strength of Glass by Flexure
(Determination of Modulus of Rupture)
Vitrified Clay Filter Blocks
Load Testing Refractory Brick at High Temperatures
Standard Test Method for Measuring Compressive
Properties of Thermal Insulations
Covering Capacity and Valume Change Upon Driving
of Thermal Insulating Cement
Thickness and Density of Blanket or Batt Thermal
Insulations
Thermal Insulating Materials
Standard Test Methods for Chemical Analysis of SodaLime and Borosilicate Glass
Compressive Strength of Dimension Stone
Standard Test Method for Air Content of Hydraulic
Cement Mortar
Normal Consistency of Hydraulic Cement
Sheet Materials for Curing Concrete
Sampling Freshly Mixed Concrete
Steady-State Heat Flux Measurements and Thermal
Transmission Properties by Means of the Guarded-HotPlate Apparatus
Thermal Conductivity of Insulating Firebrick
Sampling and the Amount of Testing of Hydraulic
Cement
Time of Setting of Hydraulic Cement by Vicat Needle
Air Content of Freshly Mixed Concrete by the
Volumetric Method
Measuring Thickness of Concrete Elements Using
Drilled Concrete Cores
Drying and Firing Linear Change of Refractory Plastic
and Ramming Mix Specimens
Workability Index of Fireclay and High- Alumina
Plastic Refractories
Standard Specification for Mineral Fiber Thermal
C 199
C 184
C 186
C 188
C 192/C 192M
C 196
C 20
C 201
C 202
C 203
C 204
C 206
C 208
C 212
C 207
C 209
C 210
C 215
C 216
C 217
C 219
C 220
C 221
C 222
C 223
C 224
C 225
C 226
C 22/C 22M
C 231
Insulating Cement
Standard Test Method for Pier Test for Refractory
Mortars
Fineness of Hydraulic Cement by the 150-um (No. 100)
and 75-um (No. 200) Sieves
Heat of Hydration of Hydraulic Cement
Density of Hydraulic Cement
Making and Curing Concrete Test Specimens in the
Laboratory
Expanded or Exfoliated Vermiculite Thermal Insulating
Cement
Test Methods for Apparent Porosity, Water Absorption,
Apparent Specific Gravity, and Bulk Density of Burned
Refractory Brick and Shapes by Boiling Water
Thermal Conductivity of Refractories
Thermal Conductivity of Refractory Brick
Breaking Load and Flexural Properties of Block-Type
Thermal Insulation
Fineness of Hydraulic Cement by Air Permeability
Apparatus
Finishing Hydrated Lime
Standard Specification for Cellulosic Fiber Insulating
Board
Standard Specification for Structural Clay Facing Tile
Hydrated Lime for Masonry Purposes
Cellulosic Fibner Insulating Board
Standard Test Method for Reheat Change of Insulating
Firebrick
Fundamental Transverse, Longitudinal, and Torsinal
Resonant Frequencies of Concrete Specimens
Standard Specification for Facing Brick (Solid Masonry
Units Made from Clay or Shale)
Test Method for Weather Resistance of Slate
Standard Terminology Relating Hydraulic Cement
Specification for Flat Asbestos-Cement Sheets
Corrugated Asbestos-Cement Sheets
Asbestos-Cement Roofing Shingles
Asbestos-Cement Siding
Practice for Sampling Glass Containers
Test Methods for Resistance of Glass Containers to
Chemical Attack
Air-Entraining Additions for Use in the Manufacture of
Air-Entraining Hydraulic Cement
Specification for Gypsum
Air Content of Freshly Mixed Concrete by the Pressure
C 240
C 227
C 232
C 233
C 234
C 236
C 24
C 241
C 242
C 243
C 25
C 260
C 265
C 27
C 270
C 271
C 273
C 274
C 267
C 272
C 279
C 28
C 282
C 283
C 285
C 286
C 295
C 296
Method
Testing Cellular Glass Insulation Block
Potential Alkali Reactivity of Cement-Aggregate
Combinations (Mortar-Bar Method)
Bleeding of Concrete
Air-Entraining Admixtures for Concrete
Comparing Concretes on the Basis of the Bond
Developed with Reinforcing Steel
Steady-State Thermal Performance of Building
Assemblies by Means of a Guarded Hot Box
Standard Test Method for Pyrometric Cone Equivalent
(PCE) of Fireclay and High Alumina Refractory
Materials
Abrasion Resistance of Stone Subjected to Foot Traffic
Standard Terminology of Ceramic Whitewares and
Related Products
Bleeding of Cement Pastes and Mortars
Chemical Analysis of Limestone, Quicklime, and
Hydrated Lime
Air-Entraining Admixtures for Concrete
Calcium Sulfate in Hydrated Portland Cement Mortar
Classification of Fireclay and High-Alumina Refractory
Brick
Mortar for Unit Masonry
Test Method for Density of Sandwich Core Materials
Test Method for Shear Properties of Sandwich Core
Materials
Terminology of Structural Sandwich Constructions
Chemical Resistance of Mortars, Grouts, and Monolithic
Surfacings
Water Absorption of Core Materials for Structural
Sandwich Constructions
Chemical-Resistant Masonry Units
Gypsum Plasters
Acid Resistance of Porcelain Enamels (Citric Acid Spot
Test)
Resistance of Procelain Enameled Utensils to Boiling
Acid
Sieve Analysis of Wet-Milled and Dry-Milled Porcelain
Enamel
Terminology Relating to Porcelain Enamel and
Ceramic-Metal Systems
Petrographic Examination of Aggregates for Concrete
Standard Specification for Asbestos-Cement Pressure
Pipe
C 287
C 288
C 289
C 293
C 294
C 297
C 29/C 29M
C 301
C 302
C 309
C 317
C 321
C 303
C 311
C 305
C 307
C 308
C 315
C 31/C 31M
C 32
C 322
C 323
C 324
C 33
C 332
C 348
C 325
C 326
Chemical-Resistant Sulfur Mortar
Dsintegration of Refractories in an Atmosphere of
Carbon Monoxide
Potential Alkali-Silica Reactivity of Aggregates
(Chemical Method)
Flexural Strength of Concrete (Using Simple Beam with
Center-Point Loading)
Constituents of Natural Mineral Aggregates
Flatwise Tensile Strength of Sandwich Construction
Unit Weight and Voids in Aggregate
Vitrified Clay Pipe
Density of Preformed Pipe-Covering-Type Thermal
Insulation
Liquid Membrane-Forming Compounds for Curing
Concrete
Gypsum Concrete
Standard Test Method for Bond Strength of ChemicalResistant Mortars
Dimensions and Density of Preformed Block and BoardType Thermal Insulation
Test Methods for Sampling and Testing Fly Ash or
Natural Pozzolans for Use as a Mineral Admixture in
Portland-Cement Concrete
Mechanical Mixing of Hydraulic Cement Pastes and
Mortars of Plastic Consistency
Tensile Strength of Chemical-Resistant Mortars, Grouts,
and Monolithic Surfacings
Working, Setting, and Service Strength Setting Times of
Chemical-Resistant Resin Mortars
Clay Flue Linings
Standard Practice for Making and Curing Concrete Test
Specimens in the Field
Sewer and Manhole Brick (Made from Clay or Shale)
Sampling Ceramic Whiteware Clays
Test Methods for Chemical Analysis of Ceramic
Whiteware Clays
Test Method for Free Moisture in Ceramic Whiteware
Clays
Standard Specification for Concrete Aggregates
Specification for Lightweight Aggregates for Insulating
Concrete
Flexural Strength of Hydraulic-Cement Mortars
Wet Sieve Analysis of Ceramic Whiteware Clays
Drying and Firing Shrinkages of Ceramic Whiteware
Clays
C 329
C 331
C 335
C 336
C 338
C 34
C 341
C 342
C 351
C 353
C 354
C 346
C 349
C 35
C 356
C 357
C 359
C 36
C 361
C 361M
C 363
C 364
C 365
C 366
C 368
C 370
C 367
C 37
C 371
Test Method for Specific Gravity of Fired Ceramic
Whiteware Materials
Standard Specification for Lightweight Aggregates for
Concrete Masonry Units
Steady-State Heat Transfer Properties of Horizontal Pipe
Insulation
Standard Test Method for Annealing Point and Strain
Point of Glass by Fiber Elongation
Softening Point of Glass
Structural Clay Load-Bearing Wall Tile
Length Change of Drilled or Sawed Specimens of
Hydraulic-Cement Mortar and Concrete
Potential Volume Change of Cement-Aggregate
Combinations
Mean Specific Heat of Thermal Insulation
Adhesion of Dried Thermal Insulating or Finishing
Cement
Compressive Strength of Thermal Insulating or
Finishing Cement
45-deg Specular Gloss of Ceramic Materials
Compressive Strength of Hydraulic Cement Mortars
(Using Portions of Prisms Broken in Flexure)
Standard Specification for Inorganic Aggregates for Use
in Gypsum Plaster
Linear Shrinkage of Preformed High-Temperature
Thermal Insulation Subjected to Soaking Heat
Bulk Density of Granular Refractory Materials
Early Stiffening of Portland Cement (Mortar Method)
Gypsum Wallboard
Reinforced Concrete Low-Head Pressure Pipe
Reinforced Concrete Low-Head Pressure Pipe [Metric]
Delamination Strength of Honeycomb Core Materials
Test Method for Edgewise Compressive Strength of
Sandwich Constructions
Flatwise Compressive Properties of Sandwich Cores
Test Methods for Measurement of Thickness of
Sandwich Cores
Test Method for Impact Resistance of Ceramic
Tableware
Test Method for Moisture Expansion of Fired
Whiteware Products
Strength Properties of Prefabricated Architectural
Acoustical Tile or Lay-In Ceilling Panels
Gypsum Lath
Test Method for Wire-Cloth Sieve Analysis of
C 372
C 373
C 374
C 375
C 383
C 384
C 385
C 386
C 387
C 395
C 398
C 399
C4
C 390
C 393
C 394
C 397
C 40
C 400
C 401
C 403/C 403M
C 404
C 405
C 406
C 408
C 411
Nonplastic Ceramic Powders
Linear Thermal Expansion of Porcelain Enamel and
Glaze Frits and Fired Ceramic Whiteware Products by
the Dilatometer Method
Test Method for Water Absorption, Bulk Density,
Apparent Porosity, and Apparent Specific Gravity of
Fired Whiteware Products
Fusion Flow of Porcelain Enamel Frits (Flow-Button
Methods)
Water Used in Milling of Procelain Enamel
Wet Adhesion of Thermal Insulating Cements to Metal
Impedance and Absorption of Acoustical Materials by
the Impedance Tube Method
Thermal Shock Resistance of Porcelain Enameled
Utensils
Use of Chemical-Resistant Sulfur Mortar
Packaged, Dry, Combined Materials for Mortar and
Concrete
Standard Specification for Chemical-Resistant Resin
Mortars
Use of Hydraulic Cement Mortars in Chemical-Resistant
Masonry
Use of Chemical-Resistant Resin Mortars
Clay Drain Tile and Perforated Clay Drain Tile
Criteria for Sampling and Acceptance of Preformed
Thermal Insulation Lots
Flexural Properties of Sandwich Construction
Shear Fatigue of Sandwich Core Materials
Use of Chemically Setting Chemical-Resistant Silicate
and Silica Mortars
Organic Impurities in Fine Aggregates for Concrete
Quicklime and Hydrated Lime for Neutralization of
Waste Acid
Standard Classification of Alumina and AluminaSilicate Castable Refractories1
Time of Setting of Concrete Mixtures by Penetration
Resistance
Aggregates for Masonry Grout
Estimating Consistency of Wet-Miixed Thermal
Insulating Cement
Specification for Roofing Slate
Test Method for Thermal Conductivity of Whiteware
Ceramics
Hot-Surface Performance of High- Temperature
Thermal Insulation
C 417
C 410
C 412
C 412M
C 413
C 414
C 416
C 418
C 419
C 421
C 423
C 425
C 426
C 42/C 42M
C 43
C 424
C 428
C 429
C 430
C 435
C 441
C 443
C 443M
C 444
C 444M
C 446
C 451
C 454
Thermal Conductivity of Unfired Monolithic
Refractories
Industrial Floor Brick
Concrete Drain Tile
Concrete Drain Tile [Metric]
Absorption of Chemical-Resistant Mortars, Grouts, and
Monolithic Surfacings
Working, Setting, and Curing Times of Chemically
Setting Chemical-Resistant Silicate and Silica Mortars
Clasification of Silica Refractory Brick
Abrasion Resistance of Concrete by Sandblasting
Standard Practice for Making and Curing Test
Specimens of Mastic Thermal Insulation Coatings
Standard Test Method for Tumbling Friability of
Preformed Block-Type Thermal Insulation
Standard Test Method for Sound Absorption and Sound
Absorption Coefficients by the Reverberation Room
Method
Compression Joints for Vitrified Clay Pipe and Fittings
Test Method for Linear Drying Shrinkage of Concrete
Masonry Units
Obtaining and Testing Drilled Cores and Sawed beams
of Concrete
Standard Terminology of Structural Clay Products
Test Method for Crazing Resistance of Fired Glazed
Whitewares by Autoclave Treatment
Asbestos-Cement Nonpressure Sewer Pipe
Sieve Analysis of Raw Materials for Glass Manufacture
Fineness of Hydraulic Cement by the 45-µm (No. 325)
Sieve
Standard Classification of Steel Pouring Pit Fireclay
Refractories
Effectiveness of Mineral Admixtures or Ground BlastFurnace Slag in Preventing Excessive Expansion of
Concrete Due to the Alkali-Silica Reaction
Joints for Circular Concrete Sewer and Culvert Pipe,
Using Rubber Gaskets
Joints for Circular Concrete Sewer and Culvert Pipe,
Using Rubber Gaskets [Metric]
Perforated Concrete Pipe
Perforated Concrete Pipe [Metric]
Breaking Load and Calulated Modulus of Rupture of
Preformed Insulation for Pipes
Early Stiffening of Hydraulic Cement (Paste Method)
Disintegration of Carbon Refractories by Alkali
C 447
C 448
C 449/C 449M
C 450
C 452
C 455
C 456
C 457
C 458
C 459
C 461
C 470/C 470M
C 473
C 476
C 460
C 465
C 466
C 467
C 469
C 471
C 471M
C 472
C 474
C 475
C 480
C 481
C 485
Estimating the Maximum Use Temperature of Thermal
Insulations
Abrasion Resistance of Porcelain Enamels
Standard Specification for Mineral Fiber HydraulicSetting Thermal Insulating and Finishing Cement
Standard Practice for Prefabrication and Field
Fabrication of Thermal Insulating Fitting Covers for
NPS Piping, Vessel Lagging, and Dished Head
Potential Expansion of Portland Cement Mortars
Exposed to Sulfate
Standard Classification of Chrome Brick, ChromeMagnesia Brick, Magnesia-Chrome Brick, and
Magnesia Brick
Hydration Resistance of Basic Bricks and Shapes
Microscopical Determination of Parameters of the AirVoid System in Hardened Concrete
Organic Fiber Content of Asbestos-Cement Products
Asbestos-Cement Flat Products
Mastics and Coatings Used with Thermal Insulation
Molds for Forming Concrete Test Cylinders Vertically
Test Methods for Physical Testing of Gypsum Panel
Products
Standard Specification for Grout for Masonry
Asbestos-Cement
Processing Additions for Use in the Manufacture of
Hydraulic Cements
Chemically Setting Silicate and Silica Chemical
Resistant Mortars
Mullite Refractories
Static Modulus of Elasticity and Poisson's Ratio of
Concrete in Compression
Chemical Analysis of Gypsum and Gypsum Products
Chemical Analysis of Gypsum and Gypsum Products
[Metric]
Physical Testing of Gypsum, Gypsum Plasters and
Gypsum Concrete
Standard Test Methods for Joint Treatment Materials for
Gypsum Board Construction
Joint Compound and Joint Tape for Finishing Gypsum
Board
Test Method for Flexure Creep of Sandwich
Constructions
Test Method for Laboratory Aging of Sandwich
Constructions
Test Method for Measuring Warpage of Ceramic Tile
C 492
C 478
C 478M
C 479
C 482
C 483
C 484
C 490
C 488
C 490
C 493
C 495
C 497
C 494
C 496
C 497M
C 498
C 499
C5
C 50
C 500
C 501
C 502
C 503
C 508
C 509
C 505
Hydration of Granular Dead-Burned Refractory
Dolomite
Precast Reinforced Concrete Manhole Sections
Precast Reinforced Concrete Manhole Sections [Metric]
Vitrified Clay Liner Plates
Bond Strength of Ceramic Tile to Portland Cement
Standard Test Method for Electrical Resistance of
Conductive Ceramic Tile
Thermal Shock Resistance of Glazed Ceramic Tile
Standard Practice for Use of Apparatus for the
Determination of Length Change of Hardened Cement
Paste, Mortar, and Concrete
Conducting Exterior Exposure Tests Finishes for
Thermal Insulation
Practice for Use of Apparatus for the Determination of
Length Change of Hardened Cement Paste, Mortar, and
Concrete
Bulk Density and Porosity of Granular Refractory
Materials by Mercury Displacement
Compressive Strength of Lightweight Insulating
Concrete
Concrete Pipe, Manhole Sections, or Tile
Chemical Admixtures for Concrete
Splitting Tensile Strength of Cylindrical Concrete
Specimens
Concrete Pipe, Manhole Sections, or Tile [Metric]
Perforated Clay Drain Tile
Test Method for Facial Dimensions and Thickness of
Flat, Rectangular Ceramic Wall and Floor Tile
Quicklime for Structural Purposes
Standard Practice for Sampling, Sample Preparation,
Packaging, and Marking of Lime and Limestone
Products
Asbestos-Cement Pipe
Relative Resistance to Wear of Unglazed Ceramic Tile
by the Taber Abraser
Test Method for Wedging of Flat, Rectangular Ceramic
Wall and Floor Tile
Specification for Marble Dimension Stone (Exterior)
Standard Specification Asbestos-Cement Underdrain
Pipe
Specification for Elastomeric Cellular Preformed Gasket
and Sealing Material
Nonreinforced Concrete Irrigation Pipe with Rubber
Gasket Joints
C 505M
C 506
C 507
C 51
C 510
C 511
C 512
C 506M
C 507M
C 513
C 522
C 530
C 514
C 515
C 516
C 518
C 520
C 531
C 533
C 534
C 535
C 536
C 541
C 542
C 544
Nonreinforced Concrete Irrigation Pipe with Rubber
Gasket Joints [Metric]
Reinforced Concrete Arch Culvert, Storm Drain, and
Sewer Pipe
Reinforced Concrete Elliptical Culvert, Storm Drain,
and Sewer Pipe
Standard Terminology Relating to Lime and Limestone
(as used by the Industry)
Staining and Color Change of Single- or
Multicomponent Joint Sealants
Moist Cabinets Moist Rooms, and Water Storage Tanks
Used in the Testing of Hydraulic Cements and
Concretes
Creep of Concrete in Compression
Reinforced Concrete Arch Culvert, Storm Drain, and
Sewer Pipe [Metric]
Reinforced Concrete Elliptical Culvert, Storm Drain,
and Sewer Pipe [Metric]
Obtaining and Testing Specimens of Hardened
Lightweight Insulating Concrete for Compressive
Strength
Airflow Resistance of Acoustical Materials
Specification for Structural Clay Nonloadbearing Screen
Tile
Nails for the Application of Gypsum Board
Chemical-Resistant Ceramic Tower Packings
Vermiculite Loose Fill Thermal Insulation
Steady-State Thermal Transmission Properties by
Means of the Heat Flow Meter Apparatus
Density of Granular Loose Fill Insulations
Linear Shrinkage and Coefficient of Thermal Expansion
of Chemical-Resistant Mortars, Grouts, and Monolithic
Surfacings
Standard Specification for Calcium Silicate Block and
Pipe Thermal Insulation
Standard Specification for Preformed Flexible
Elastomeric Cellular Thermal Insulation in Sheet and
Tubular Form
Resistance to Degradation of Large-Size Coarse
Aggregate by Abrasion and Impact in the Los Angeles
Machine
Continuity of Coatings in Glassed Steel Equipment By
Electrical Testing
Linings for Asbestos-Cement Pipe
Specification for Lock-Strip Gaskets
Hydration of Magnesite or Periclase Grain
C 537
C 538
C 539
C 545
C 547
C 549
C 55
C 551
C 550
C 552
C 553
C 554
C 560
C 567
C 568
C 595
C 557
C 559
C 56
C 561
C 562
C 563
C 564
C 565
C 566
C 598
C 610
C 613/C 613M
C 570
Reliability of Glass Coatings on Glassed Steel Reaction
Equipment by High Voltage
Color Retention of Red, Orange and Yellow Porcelain
Enamels
Standard Test Method for Linear Thermal Expansion of
Porcelain Enamel and Glaze Frits and Ceramic
Whiteware Materials by Interf
Classification of Zircon Refractories
Standard Specification for Mineral Fiber Pipe Insulation
Perlite Loose Fill Insulation
Standard Specification for Concrete Brick
Specification for Asbestos-Cement Fiberboard
Insulating Panels
Measuring Trueness and Squareness of Rigid Block and
Board Thermal Insulation
Cellular Glass Thermal Insulation
Specification for Mineral Fiber Blanket Thermal
Insulation for Commercial and Industrial Applications
Test Method for Crazing Resistance of Fired Glazed
Ceramic Whitewares by a Thermal Shock Method
Chemical Analysis of Graphite
Density of Structural Lightweight Concrete
Limestone Dimension Stone
Standard Specification for Blended Hydraulic Cements
Adhesives for Fastening Gypsum Wallboard to Wood
Framing
Bulk Dencity by Physical Measurements of
Manufactured Carbon and Graphite Articles
Structural Clay Non-Load-Bearing Tile
Ash in a graphite Sample
Moisture in a Graphite Sample
Optimum SO3 in Hydraulic Cement Using 24-h
Compressive Strength
Rubber Gaskets for Cast Iron Soil Pipe and Fittings
Tension Testing of Carbon and Graphite Mechanical
Materials
Total Evaporable Moisture Content of Aggregate by
Drying
Annealing Point and Strain Point of Glass by Beam
Bending
Specification for Molded Expanded Perlite Block and
Pipe Thermal Insulation
Constituent Content of Composite Prepreg by Soxhelt
Extraction
Specification for Oil- and Resin-Base Caulking
C 577
C 578
C 579
C 580
C 581
C 582
C 583
C 584
C 585
C 586
C 615
C 730
C 731
C 587
C 59
C 591
C 592
C 593
C 595M
C 595M
C 596
C 597
C 599
C 600
C 601
C 603
Compound for Building Construction
Permeability of Refractories
Standard Specification for Rigid, Cellular Polystyrene
Thermal Insulation
Standard Test Methods for Compressive Strength of
Chemical-Resistant Mortars, Grouts, Monolithic
Surfacings, and Polymer Concretes
Flexural Strength and Modulus of Elasticity of
Chemical-Resistant Mortars, Grouts, Monolithic
Surfacings, and Polymer Concretes
Standard Practice for Determining Chemical Resistance
of Thermosetting Resins Used in Glass-FiberReinforced Structures Intended for Liquid Service
Contact-Molded Reinforced Thermosetting Plastic
(RTP) Laminates for Corrosion Resistant Equipment
Standard Test Method for Modulus of Rupture of
Refractory Materials at Elevated Temperatures
Test Method for Specular Gloss of Glazed Ceramic
Whitewares and Related Products
Inner and Outer Diameters of Rigid Thermal Insulation
for Nominal Sizes of Pipe and Tubing (NPS Systems)
Potential Alkali Reactivity of Carbonate Rocks for
Concrete Aggregates (Rock Cylinder Method)
Granite Dimension Stone
Knoop Indentation Hardness of Glass
Test Method for Extrudability, After Package Aging, of
Latex Sealants
Gypsum Veneer Plaster
Gypsum Casting and Molding Plaster
Standard Specification for Unfaced Preformed Rigid
Cellular Polyisocyanurate Thermal Insulation
Standard Specification for Mineral Fiber Blanket
Insulation and Blanket-Type Pipe Insulation (MetalMesh Covered) (Industrial Type)
Fly Ash and Other Pozzolans for Use with Lime
Blended Hydraulic Cements [Metric]
Blended Hydraulic Cements
Standard Test Method for Drying Shrinkage of Mortar
Containing Hydraulic Cement
Pulse Velocity Through Concrete
Conical Process Glass Pipe and Fittings
Standard Method of Thermal Shock Test on Glass Pipe
Standard Test Method for Pressure Test on Glass Pipe
Extrusion Rate and Application Life of Elastomeric
Sealants
C 602
C 604
C 605
C 607
C 609
C 61
C 611
C 612
C 614
C 616
C 617
C 630/C 630M
C 645
C 648
C 618
C 62
C 621
C 622
C 623
C 625
C 627
C 629
C 631
C 632
C 67
C 685
C 73
Agricultural Liming Materials
True Specific Gravity of Refractory Materials by GasComparision Pycnometer
Reheat Change of Fireclay Nozzles and Sleeves
Standard Practice for Coking Large Shapes of CarbonBearing Materials
Standard Test Method for Measurement of Small Color
Differences Between Ceramic Wall or Floor Tile
Gypsum Keene's Cement
Electrical Resistivity of Manufactured Carbon and
Graphite Articles at Room Temperature
Standard Specification for Mineral Fiber Block and
Board Thermal Insulation
Alkali Resistance of Porcelain Enamels
Quartz-Based Dimension Stone
Capping Cylindrical Concrete Specimens
Specification for Water-Resistant Gypsum Backing
Board
Specification for Nonstructural Steel Framing Members
Breaking Strength of Ceramic Tile
Coal Fly Ash and Raw or Calcined Natural Pozzolan for
Use as a Mineral Admixture in Concrete
Standard Specification for Building Brick (Solid
Masonry Units Made From Clay or Shale)
Isothermal Corrosion Resistance of Refractories to
Molten Glass
Corrosion Resistance of Refractories to Molten Glass
Using the Basin Furnance
Standard Test Method for Young's Modulus, Shear
Modulus, and Poisson's Ratio for Glass and GlassCeramics by Resonance
Reportings Irradiation Results on Graphite
Test Method for Evaluating Ceramic Floor Tile
Installation Systems Using the Robinson-Type Floor
Tester
Slate Dimension Stone
Bonding Compounds for Interior Gypsum Plastering
Standard Test Method for Reboiling Tendency of Sheet
Steel for Porcelain Enameling
Test Methods for Sampling and Testing Brick and
Structural Clay Tile
Concrete Made By Volumetric Batching and Continuous
Mixing
Specification for Calcium Silicate Brick (Sand-Lime
Brick)
C 634
C 635
C 639
C 633
C 636
C 638
C 641
C 642
C 647
C 650
C 662
C 663
C 651
C 652
C 653
C 654
C 654M
C 655
C 655M
C 656
C 657
C 658
C 748
C 772
C 776
C 661
C 664
C 666
C 659
C 660
Environmental Acoustics
Specification for the Manufacture, Performance, and
Testing of Metal Suspension Systems for Acoustical
Tile and Lay-in Panel Ceilings
Rheological (Flow) Properties of Elastomeric Sealants
Adhesion or Cohesive Strength of Flame-Sprayed
Coatings
Installation of Metal Ceiling Suspension Systems for
Acoustical Tile and Lay-In Panels
Radiation-Shielding Concrete
Standard Test Method for Iron Staining Materials in
Lightweight Concrete Aggregates
Density, Absorption, and Voids in Hardened Concrete
Standard Guide to Properties and Tests of Mastics and
Coating Finishes for Thermal Insulation
Resistance of Ceramic Tile to Chemical Substances
Impervious Graphite Pipe and Threading
Asbestos-Cement Storm Drain Pipe
Flexural Strength of Manufactured Carbon and Graphite
Articles Using Four-Point Loading at Room
Temperature
Standard Specification for Hollow Brick (Hollow
Masonry Units Made From Clay or Shale)
Determination of the Thermal Resistance of LowDensity Blanket-Type Mineral Fiber Insulation
Porous Concrete Pipe
Porous Concrete Pipe [Metric]
Reinforced Concrete D-Load Culvert, Storm Drain, and
Sewer Pipe
Reinforced Concrete D-Load Culvert, Storm Drain, and
Sewer Pipe [Metric]
Standard Specification for Structural Insulating Board,
Calcium Silicate
D -C Volume Resistivity of Glass
Chemical-Resistant Resin Grouts for Brick or Tile
Rockwell Hardness of Graphite Materials
Oil Migration or Plasticizer Bleed-Out of Preformed
Tape Sealants
Specification for Sintered Uranium Dioxide Pellets
Indentation Hardness of Elastomeric-Type Sealants by
Means of a Durometer
Thickness of Diffusion Coating
Resistance of Concrete to Rapid Freezing and Thawing
Asbestos-Cement Organic-Foam Core Insulating Panels
Production and Preparation of Gray Iron Castings for
C 665
C 667
C 668
C 669
C 670
C 674
C 679
C 671
C 672/C 672M
C 673
C 675
C 676
C 680
C 681
C 682
C 684
C 686
C 70
C 702
C 71
C 689
C 692
C 687
C 688
Porcelain Enameling
Mineral-Fiber Blanket Thermal Insulation for Light
Frame Construction and Manufactured Housing
Prefabricated Reflective Insulation Systems for
Equipment and Pipe Operating at Temperatures above
Ambient Air
Asbestos-Cement Transmission Pipe
Specification for Glazing Compounds for Back Bedding
and Face Glazing of Metal Sash
Preparing Precision and Statements for test Methods for
Construction Materials
Test Methods for Flexural Properties of Ceramic
Whiteware Materials
Tack-Free Time of Elastomeric Sealants
Test Method for Critical Dilation of Concrete Specimens
Subjected to Freezing
Scaling Resistance of Concrete Surfaces Exposed to
Deicing Chemicals
Fireclay and High-Alumina Plastic Refractories and
Ramming Mixes
Alkali Resistance of Ceramic Decorations on Returnable
Beverage Glass Containers
Test Method for Detergent Resistance of Ceramic
Decorations on Glass Tableware
Determination of Heat Gain or Loss and the Surface
Temperatures of Insulated Pipe and Equipment Systems
by the Use of a Computer Program
Volatility of Oil- and Resin-Based, Knife-Grade,
Channel Glazing Compounds
Evaluation of Frost Resistance of Coarse Aggregates in
Air-Entrained Concrete by Critical Dilation Procedures
Test Method for Making, Accelerated Curing, and
Testing Concrete Compression Test Specimens
Parting Strength of Mineral Fiber Batt- and BlanketType Insulation
Standard Test Method for Surface Moisture in Fine
Aggregate
Reducing Samples of Aggregate to Testing Size
Standard Terminology Relating to Refractories
Modulus of Rupture of Unfired Clays
Test Method for Evaluating the Influence of Thermal
Insulations on External Stress Corrosion Cracking
Tendency of Austenitic Stainless Steel
Determination of Thermal Resistance of Loose-Fill
Building Insulation
Functional Additions for Use in Hydraulic Cements
C 690
C 693
C 694
C 695
C 696
D 6534
C 697
C 698
C 700
C 703
C 704
C 706
C 709
C 711
C 712
C 717
C 726
C 728
C 713
C 715
C 722
C 714
C 716
C 718
C 719
C 721
Particle Size Distribution of Alumina or Quartz by
Electric Sensing Zone Technique
Density of Glass by Buoyancy
Standard Test Method for Weight Loss (Mass Loss) of
Sheet Steel During Immersion in Sulfuric Acid Solution
Compressive Strength of Carbon and Graphite
Chemical, Mass Spectrometric, and Spectrochemical
Analysis of Nuclear-Grade Uranium Dioxide Powders
and Pellets
D 6534 - 00
Chemical, Mass Spectrometric, and Spectrochemical
Analysis of Nuclear-Grade Plutonium Dioxide Powders
and Pellets
Chemical, Mass Spectrometric, and Spectrochemical
Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
Vitrified Clay Pipe, Extra Strength, Standard Strength,
and Perforated
Spalling Resistance of Porcelain Enameled Aluminum
Abrasion Resistance of Refractory Materials at Room
Temperature
Limestone for Animal Feed Use
Manufactured Carbon and Graphite
Low-Temperature Flexibility and Tenacity of One-Part,
Elastomeric, Solvent-Release Type Sealants
Bubbling of One-Part, Elastomeric, Solvent-Release
Type Sealants
Standard Terminology of Building Seals and Sealants
Standard Specification for Mineral Fiber Roof Insulation
Board
Perlite Thermal Insulation Board
Test Method for Slump of an Oil-Base Knife-Grade
Channel Glazing Compound
Standard Test Method for Nickel on Steel for Porcelain
Enameling by Photometric Analysis
Chemical-Resistant Resin Monolithic Surfacings
Thermal Diffusivity of Carbon and Graphite by a
Thermal Pulse Method
Installing Lock-Strip Gaskets and Infill Glazing
Materials
Ultraviolet (UV)-Cold Box Exposure of One-Part,
Elastomeric, Solvent-Release Type Sealants
Adhesion and Cohesion of Elastomeric Joint Sealants
Under Cyclic Movement (Hockman Cycle)
Average Particle Size of Alumina and Silica Powders by
Air Permeability
C 723
C 724
C 725
C 727
C 729
C 732
C 733
C 734
C 735
C 736
C 737
C 739
C 742
C 746
C 738
C 740
C 743
C 744
C 741
C 745
C 747
C 749
C 750
C 751
C 755
C 76
C 765
C 752
C 753
C 754
Chemical-Resistant Resin Grouts for Brick or Tile
Standard Test Method for Acid Resistance of Ceramic
Decorations on Architectural-Type Glass
Semidense Mineral Fiber Siding
Use and Installation of Relfective Insulation in Building
Constructions
Standard Test Method for Density of Glass by the SinkFloat Comparator
Aging Effects of Artificial Weathering on Latex
Sealants
Volume Shrinkage of Latex Sealants
Low Temperature Flexibility of Latex Sealants After
Artificial Weathering
Test Method for Acid Resistance of Ceramic
Decorations on Returnable Beer and Beverage Glass
Containers
Extension-Recovers and Adhesion of Latex Sealants
Limestone for Dusting of Coal Mines
Specification for Cellulosic Fiber (Wood-Base) LooseFill Thermal Insulation
Degree of Set for Wood Sash Glazing Compound
Corrugated Asbestos-Cement Sheets for Bulkheading
Test Method for Lead and Cadmium Extracted from
Glazed Ceramic Surfaces
Evacuated Reflactive Insulation in Cryogenic Service
Continuity of Procelain Enamel Coatings
Prefaced Concrete and Calcium Silicate Masonry Units
Accelerated Aging of Wood Sash Face Glazing
Compound
Heat Flux Through Evacuated Insulations Using a
Guarded Flat Plate Boiloff Calorimeter
Moduli of Elasticity and Fundamental Frequencies of
Carbon and Graphite Materials by Sonic Resonance
Tensile Stress-Strain of Carbon and Graphite
Nuclear-Grade Boron Carbide Powder
Nuclear-Grade Boron Carbide Pellets
Selection of Vapor Retarders for Thermal Insulation
Reinforced Concrete Culvert, Storm Drain, and Sewer
Pipe
Low-Temperature Flexibility of Preformed Tape
Sealants
Nuclear-Grade Silver-Indium-Cadmium Alloy
Nuclear-Grade, Sinterable Uranium Dioxide Powder
Standard Specification for Installation of Steel Framing
Members to Receive Screw-Attached Gypsum Panel
C 756
C 757
C 758
C 759
C 760
C 761
C 770
C 771
C 764
C 767
C 768
C 769
C 76M
C 773
C 774
C 775
C 777
C 778
C 779
C 78
C 782
C 793
C 780
C 781
C 783
C 784
Products
Cleanability of Surface Finishes
Nuclear-Grade Plutonium Dioxide Powder, Sinterable
Chemical, Mass Spectrometric, Spectrochemical,
Nuclear, and Radiochemical Analysis of Nuclear-Grade
Plutonium Metal
Chemical, Mass Spectrometric, Spectrochemical,
Nuclear, and Radiochemical Analysis of Nuclear-Grade
Plutonium Nitrate Solutions
Chemical and Spectrochemical Analysis of NuclearGrade Silver-Indium-Cadmium Alloys
Chemical, Mass Spectrometric, Spectrochemical,
Nuclear, and Radiochemical Analysis of Uranium
Hexafluoride
Measurement of Glass Stress - Optical Coefficent
Weight Loss After Heat Aging of Performed Tape
Sealants
Mineral Fiber Loose-Fill Thermal Insulation
Thermal Conductivity of Carbon Refractories
Drip Slag Testing Refractory Brick at High Temperature
Sonic Velocity in Manufactured Carbon and Graphite
Materials for Use in Obtaining an Approximate Young's
Modulus
Reinforced Concrete Culvert, Storm Drain, and Sewer
Pipe [Metric]
Test Method for Compressive (Crushing) Strength of
Fired Whiteware Materials
Standard Test Method for Yield Strength of Enameling
Steels After Straining and Firing
Particle-Size Analysis of Whiteware Clays
Test Method for Sulfide Resistance of Ceramic
Decorations on Glass
Specification for Standard Sand
Abrasion Resistance of Horizontal Concrete Surfaces
Flexural Strength of Concrete (Using Simple Beam with
Third-Point Loading)
Softness of Preformed Tape Sealants
Effects of Accelerated Weathering on Elastomeric Joint
Sealants
Standard Test Method for Preconstruction and
Construction Evaluation of Mortars for Plain and
Reinforced Unit Masonry
High-Temperature Gas-Cooled Nuclear Reactors
Core Sampling of Graphite Electrodes
Nuclear-Grade Aluminium Oxide-Boron Carbide
C 785
C 786
C 787
C 788
C 789
C 797
C 791
C 789M
C 79/C 79M
C 794
C 792
C 795
C 796
C 799
C 800
C 801
C 802
C 821
C 822
C 803/C 803M
C 805
C 806
C 807
C 808
C 809
Composite Pellets
Nuclear-Grade Aluminium Oxide Pellets
Fineness of Hydraulic Cement and Raw Materials by the
300-µm (No. 50), 150-µm (No. 1.00), and 75-µm (No.
200) Sieves by Wet Methods
Uranium Hexafluoride for Enrichment
Nuclear-Grade Uranyl Nitrate Solution
Precast Reinforced Concrete Box Sections for Culverts,
Strom Drains, and Sewers
Use of Oil- and Resin-Based Putty and Glazing
Compounds
Specification for Treated Core and Nontreated Core
Gypsum Sheathing Board
Precast Reinforced Concrete Box Sections for Culverts,
Storm Drains, and Sewers [Metric]
Test Methods for Chemical, Mass Spectrometric, and
Spectrochemical Analysis of Nuclear-Grade Boron
Carbide
Adhesion-in-Peel of Elastomeric Joint Sealants
Effects of Heat Aging on Weight Loss, Cracking, and
Chalking of Elastomeric Sealants
Thermal Insulation for Use in Contact with Austenitic
Stainless Steel
Foaming Agents for Use in Producing Cellular Concrete
Using Preformed Foam
Chemical, Mass Spectrometric, Spectrochemical,
Nuclear, and Radiochemical Analysis of Nuclear-Grade
Uranyl Nitrate Solutions
Glass Fiber Balnket Insulation (Aircraft Type)
Determining the Mechanical Properties of Hardened
Concrete Under Triaxial Loads
Conducting an Interlaboratory Test Program to
Determine the Precision of Test Methods for
Construction Materials
Standard Specification for Lime for Use with Pozzolans
Concrete Pipe and Related Products
Penetration Resistance of Hardened Concrete
Rebound Number of Hardened Concrete
Restrained Expansion of Expansive Cement Mortar
Time of Setting of Hydraulic Cement Mortar by
Modified Vicat Needle
Reporting Friction and Wear Test Results of
Manufactured Carbon and Graphite Bearing and Seal
Materials
Test Methods for Chemical, Mass Spectrometric, and
C 810
C 811
C 813
C 816
C 823
C 834
C 837
C 840
C 824
C 825
C 827
C 828
C 829
C 830
C 831
C 832
C 833
C 835
C 836
C 841
C 842
C 838
C 839
Spectrochemical Analysis of Nuclear-Grade Aluminum
Oxide and Aluminum Oxide-Boron Carbide Composite
Pellets
Standard Test Method for Nickel on Steel for Porcelain
Enameling by X-Ray Emission Spectrometry
Surface Preparation of Concrete for Application of
Chemical-Resistant Resin Monolithic Surfacings
Test Method for Hydrophobic Contamination on Glass
by Contact Angle Measurement
Sulfur in Graphite by Combustion-Iodometric Titration
Method
Examination and Sampling of Hardened Concrete in
Constructions
Standard Specification for Latex Sealants
Test Method for Methylene Blue Index of Clay
Standard Specification for Application and Finishing of
Gypsum Board
Standard Practice for Specimen Preparation for
Determination of Linear Thermal Expansion of Vitreous
Glass Enamels and Glass En
Precast Concrete Barrier
Change in Height at Early Ages of Cylindrical
Specimens from Cementitious Mixtures
Low-Pressure Air Test of Vitrified Clay Pipe Lines
Standard Practices for Measurement of Liquidus
Temperature of Glass by the Gradient Furnace Method
Test Methods for Apparent Porosity, Liquid Absorption,
Apparent Specific Gravity, and Bulk Density of
Refractory Shapes by Vacuum Pressure
Residual Carbon, Apparent Carbon, and Apparent
Carbon Yield in Coked Carbon- containing Brick and
Shapes
Standard Test Method of Measuring the Thermal
Expansion and Creep of Refractories Under Load
Sintered (Uranium-Plutonium) Dioxide Pellets
Total Hemispherical Emittance of Surfaces form 20 to
1400°C
High Solids Content, Cold Liquid-Applied Elastomeric
Waterproofing Membrane with Separate Wearing
Course
Specification for Installation of Interior Lathing and
Furring
Specification for Application of Interior Gypsum Plaster
Bulk Density of As-Manufactured Carbon and Graphite
Shapes
Compressive Stress of Porcelain Enamels by Loaded-
C 843
C 844
C 845
C 846
C 847
C 848
C 849
C 850
C 850M
C 852
C 880
C 881
C 895
C 856
C 857
C 858
C 859
C 860
C 861
C 862
C 863
C 864
C 865
C 896
C 897
C 90
C 91
Beam Method
Specification for Application of Gypsum Veneer Plaster
Specification for Application of Gypsum Base to
Receive Gypsum Veneer Plaster
Expansive Hydraulic Cement
Application of Cellulosic Fiber Insulating Board for
Wall Sheathing
Specification for Metal Lath
Test Method for Young's Modulus, Shear Modulus, and
Poisson's Ratio For Ceramic Whitewares by Resonance
Test Method for Knoop Indentation Hardness of
Ceramic Whitewares
Precast Reinforced Concrete Box Sections for Culverts,
Storm Drains, and Sewers with Less Than 2 ft of Cover
Subjected to Highway Loadings
Precast Reinforced Concrete Box Sections for Culverts,
Storm Drains, and Sewers with Less Than 0.6 m of
Cover Subjected to Highway Loadings [Metric]
Design Criteria for Plutonium Gloveboxes
Flexural Stength of Dimension Stone
Epoxy-Resin-Base Bonding Systems for Concrete
Lead and Cadmium Extracted from Glazed Ceramic Tile
Petrographic Examination of Hardened Concrete
Minimum Structural Design Loading for Underground
Percast Concrete Utility Structures
Underground Precast Concrete Utility Structures
Nuclear Materials
Practice for Determining the Consistency of Refractory
Castable Using the Ball-In-Hand Test
Determining Metric Dimensions of Stadard Series
Refractory Brick and Shapesq
Standard Practice for Preparing Refractory Concrete
Specimens by Casting
Standard Test Method for Evaluating Oxidation
Resistance of Silicon Carbide Refractories at Elevated
Temperatures
Dense Elastomeric Compression Seal Gaskets, Setting
Blocks, and Spacers
Firing Refractory Concrete Specimens
Clay Products
Specification for Aggregate for Job-Mixed Portland
Cement-Based Plasters
Standard Specification for Loadbearing Concrete
Masonry Units
Specification for Masonry Cement
C 956
C 866
C 867
C 868
C 869
C 87
C 870
C 871
C 872
C 873
C 874
C 97
D 1151
d 1360
C 875
C 876
C 877
C 877M
C 878
C 879
C 88
C 882
C 884/C 884M
C 885
C 886
Installation of Cast-in-Place Reinforced Gypsum
Concrete
Filtration Rate of Ceramic Whiteware Clays
Standard Test Method for Soluble Sulfate in Ceramic
Whiteware Clays (Photometric Method)
Chemical Resistance of Protective Linings
Foaming Agents Used in Making Preformed Foam for
Cellular Concrete
Effect of Organic Impurities in Fine Aggregate on
Strength of Mortar
Standard Practice for Conditioning of Thermal
Insulating Materials
Test Methods for Chemical Analysis of Thermal
Insulation Materials for Leachable Chloride, Fluoride,
Silicate, and Sodium Ions
Lead and Cadium Release from Porcelain Enamel
Surfaces
Compressive Strength of Concrete Cylinders Cast in
Place in Cylindrical Molds
Rotary Slag Testing of Refractory Materials
Test Methods for Absorption and Bulk Specific Gravity
of Dimension Stone
Practice for Effect of Moisture and Temperature on
Adhesive Bonds
Fire Retardancy of Paints (Cabinet Method)
Asbestos-Cement Conduit
Half-Cell Potentials of Uncoated Reinforcing Steel in
Concrete
Specification for External Sealing Bands for Noncircular
Concrete Sewer, Storm Drain, and Culvert Pipe
Specification for External Sealing Bands for Noncircular
Concrete Sewer, Storm Drain, and Culvert Pipe [Metric]
Restrained Expansion of Shrinkage-Compensating
Concrete
Release Papers Used With Preformed Tape Sealants
Soundness of Aggregates by Use of Sodium Sulfate or
Magnesium Sulfate
Bond Strength of Epoxy-Resin Systems Used with
Concrete by Slant Shear
Thermal Compatibility Between Concrete and an
Epoxy-Resin Overlay
Youngs Modulus of Refractory Shapes by Sonic
Resonance
Scleroscope Hardness Testing of Fine-Grained Carbon
and Graphite Materials
C 887
D 1386
D 1392
D 1401
C 888
C 889
C 890
C 891
C 892
C 898
C 899
C 900
C 901
C 902
C 903
C 906
C 904
C 905
C 907
C 908
C 909
C 910
C 911
C 912
C 913
Packaged, Dry, Combined Materials for Surface
Bonding Mortar
Acid Number (Empirical) of Synthetic and Natural
Waxes
Safflower Oil
Water Separability of Petroleum Oils and Synthetic
Fluids
Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
Chemical and Mass Spectrographic Analysis of NuclearGrade Gadolinium Oxide (Gd2O3) Powder
Minimum Structural Design Loading for Monolithic or
Sectional Precast Concrete Water and Wastewater
Structures
Installation of Underground Precast Concrete Utility
Structures
Standard Specification for High-Temperature Fiber
Blanket Thermal Insulation
Use of High Solids Content, Cold Liquid-Applied
Elastomeric Waterproofing Membrane Separate
Wearing Course
use of Metric Units of Measure for Reporting Properties
of Refractory Materials
Pullout Strength of Hardened Concrete
Prefabricated Masonry Panels
Standard Specification for Pedestrian and Light Traffic
Paving Brick
Preparing Refractory Concrete Specimens by Cold
Gunnig
Standard Test Method for T-Peel Strength of Hot
Applied Sealants
Standard Terminology Relating to Chemical-Resistant
Nonmetallic Materials
Standard Test Methods for Apparent Density of
Chemical-Resistant Mortars, Grouts, Monolithic
Surfacings, and Polymer Concretes
Tensile Adhesive Strength of Performed Tape Sealants
by Disk Method
Yield Strength of Preformed Tape Sealants
Standard Practice for Dimensions of a Modular Series of
Refractory Brick and Shapes
Bond and Cohesion of One-Part Elastomeric Solvent
Release-Type Sealants
Quicklime, Hydrated Lime, and Limestone for Chemical
Use
Designing a Process for Cleaning Technical Glasses
Precast Concrete Water and Wastewater Structures
C 914
C 917
C 920
C 922
C 915
C 916
C 918
C 919
C 92
C 921
C 923
C 923M
C 924M
C 925
C 926
C 924
C 932
C 94/C 94M
C 927
C 928
C 929
C 930
C 931/C 931M
C 933
C 935
Standard Test Method for Bulk Density and Volume of
Solid Refractories by Wax Immersion
Evaluation of Cement Strength Uniformity from a
Single Source
Standard Specification for Elastomeric Joint Sealants
Specification for Sintered Gadolinium Oxide-Uranium
Dioxide Pellets
Precast Reinforced Concrete Crib Wall Members
Adhesives for Duct Thermal Insulation
Measuring Early Age Compressive Strength and
Projecting Later-Age Strength
Use of Sealants in Acoustical Applications
Standard Test Methods for Sieve Analysis and Water
Content of Refractory Materials
Practice for Determining the Properties of Jacketing
Materials for Thermal Insulation
Resilient Connectors Between Reinforced Concrete
Manhole Structures, Pipes, and Laterals
Resilient Connectors Between Reinforced Manhole
Structures, Pipes, and Laterals [Metric]
Testing Concrete Pipe Sewer Lines by Low-Pressure Air
Test Method Metric
Standard Test Method for Precision Electroformed Wet
Sieve Analysis of Nonplastic Ceramic Powders
Application of Portland Cement-Based Plaster
Testing Concrete Pipe Sewer Lines by Low-Pressure Air
Test Method
Surface-Applied Bonding Compounds for Exterior
Plastering
Standard Specification for Ready-Mixed Concrete
Test Method for Lead and Cadmium Extracted from the
Lip and Rim Area of Glass Tumblers Externally
Decorated with Ceramic Glass Enamels
Packaged, Dry, Rapid-Hardening Cementitious
Materials for Concrete Repairs
Standard Practice for Handling, Transporting, Shipping,
Storage, Receiving, and Application of Thermal
Insulation Materials For
Classification of Petential Health and Safety Concerns
Associated with Thermal Insulation Materials and
Accessories
Exterior Gypsum Soffit Board
Welded Wire Lath
General Requirements for Prestressed Concrete Poles
Statically Cast
C 936
C 937
C 938
D 6535
C 939
C 940
C 941
C 942
C 943
C 944
C 945
C 946
C 948
C 947
C 949
C 950
C 952
C 953
C 954
C 955
C 957
Solid Concrete Interlocking Paving Units
Grout Fluidifier for Preplaced-Aggregate Concrete
Proportioning Grout Mixtures for Preplaced-Aggregate
Concrete
D 6535 - 00
Flow of Grout for Preplaced-Aggregate Concrete (Flow
Cone Method)
Expansion and Bleeding of Freshly Mixed Grouts for
Preplaced-Aggregate Concrete in the Laboratory
Water Retentivity of Grout Mixtures for PreplacedAggregate Concrete in the Laboratory
Compressive Strength of Grouts for PreplacedAggregate Concrete in the Laboratory
Making Test Cylinders and Prisms for Determining
Strength and Density of Preplaced-Aggregate Concrete
in the Laboratory
Abrasion Resistance of Concrete or Mortar Surfaces by
the Rotating-Cutter Method
Standard Practice for Design Considerations and Spray
Application of a Rigid Cellular Polyurethane Insulation
System on Outdoor
Construction of Dry-Stacked, Surface-Bonded Walls
Standard Test Method for Dry and Wet Bulk Density,
Water Absorption, and Apparent Porosity of Thin
Sections of Glass-Fiber Reinforced Concrete
Flexural Properties of Thin-Section Glass-Reinforced
Concrete (Using Simple Beam with Third-Point
Loading)
Standard Test Method for Porosity in Vitreous
Whitewares by Dye Penetration
Standard Practice for Repair of a Rigid Cellular
Polyurethane Insulation System on Outdoor Service
Vessels
Bond Strength of Mortar to Masonry Units
Time of Setting of Grouts for Preplaced-Aggregate
Concrete in the Laboratory
Specification for Steel Drill Screws for the Application
of Gypsum Panel Products or Metal Plaster Bases to
Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84
mm) in Thickness
Specification for Load-Bearing (Transverse and Axial)
Steel Studs, Runners (Tracks), and Bracing or Bridging
for Screw Application of Gypsum Panel Products and
Metal Plaster Bases
High-Solids Content, Cold Liquid-Applied Elastomeric
Waterproofing Membrane Integral Wearing Surface
C 958
C 960/C 960M
C 966
C 968
C 961
C 963
C 964
C 965
C 967
C 969
C 969M
C 970
C 972
C 99
D 6662
C 998
D 1003
D 1007
C 973
C 974
C 975
C 976
C 978
C 979
C 980
C 981
Standard Test Method for Particle Size Distribution of
Alumina or Quartz by X-Ray Monitoring of Gravity
Sedimentation
Predecorated Gypsum Board
Installing Abestos-Cement Nonpressure Pipe
Analysis of Sintered Gadolinium Oxide-Uranium
Dioxide Pellets
Lap Shear Strength of Hot-Applied Sealants
Packaging, Identification, Shipment, and Storage of
Lock-Strip Gaskets
Lock-Strip Gasket Glazing
Measuring Viscosity of Glass Above the Softening Point
Uranium Ore Concentrate
Standard Practice for Infiltration and Exfiltration
Acceptance Testing of Installed Precast Concrete Pipe
Sewer Lines
Standard Practice for Infiltration and Exfiltration
Acceptance Testing of Installed Precast Concrete Pipe
Sewer Lines [Metric]
Sampling Nuclear Materials in Multi-Container Lots
Compression-Recovery of Tape Sealants
Test Method for Modulus of Rupture of Dimension
Stone
Standard Specification for Polyolefin-Based Plastic
Lumber Decking Boards
Practice for Sampling Surface Soil for Radionuclides
Test Method for Haze and Luminous Transmittance of
Transparent Plastics
Specification for sec-Butyl Alcohol
Preparing Test Specimens from Basic Refractory
Gunning Products by Pressing
Preparing Test Specimens from Basic Refractory
Castable Products by Casting
Preparing Test Specimens from Basic Refractory
Ramming Products by Pressing
Thermal Performance of Building Assemblies by Means
of a Calibrated Hot Box
Photoelasitic Determination of Residual Stress in a
Transparent Glass Matrix Using a Polarizing
Microscope and Optical Retardation Compensation
Procedures
Pigments for Integrally Colored Concrete
Industrial Chimney Lining Brick
Design of Built-Up Bituminous Membrane
Waterproofing Systems for Building Decks
C 982
C 985
D 1062
D 1066
C 985M
C 986
C 987
C 989
C 990
C 991
D 6536
C 996
C 999
D 1004
C 990M
C 992
C 993
C 995
D 1000
D 1002
D 1005
D 1006
D 1013
D 1018
D 1038
D 1049
D 1051
D 1014
Selecting Components for Energy-Dispersive X-Ray
Fluorescence (XRF) Systems
Nonreinforced Concrete Specified Strength Culvert,
Storm Drain, and Sewer Pipe
Cleavage Strength of Metal-to-Metal Adhesive Bonds
Standard Practice for Sampling Steam
Nonreinforced Concrete Specified Strength Culvert,
Storm Drain, and Sewer Pipe {Metric}
Developing Training Programs in the Nuclear Fuel
Cycle
Standard Practice for Vapor Attack on Refractories for
Furnace Superstructures
Ground Granulated Blast-Furnace Slag for Use in
Concrete and Mortars
Joints for Concrete Pipe, Monholes, and Precast Box
Sections Unsing Preformed Flexible Joint Sealants
Standard Specification for Flexible Glass Fiber
Insulation for Metal Buildings
D 6536 - 00
Uranium Hexafluoride Enriched to Less Than 5 % 235U
Practice for Soil Sample Preparation for the
Determination of Radionuclides
Initial Tear Resistance of Plastics Film and Sheeting
Joints for Concrete Pipe, Manholes, and Precast Box
Sections Using Preformed Flexible Sealants {Metric}
Boron-Based Neutron Absorbing Materials Systems for
Use in Nuclear Spent Fuel Storage Racks
In-Plant Performance Evaluation of Automatic
PedestrianSNM Monitors
Time of Flow of Fiber-Reinforced Concrete Through
Inverted Slump Cone
Pressure-Sensitive Adhesive-Coated Tapes Used for
Electrical and Electronics Applications
Apparent Shear Strength of Single-Lap-Joint Adhesively
Bonded Metal Specimens by Tension Loading (Metalto-Metal)
Standard Test Method for Measurement of Dry-Film
Thickness of Organic Coatings Using Micrometers
Conducting Exterior Exposure Tests of Paints on Wood
Determining Total Nitrogen in Resins and Plastics
Test Method for Hydrogen In Petroleum Fractions
Standard Terminology Relating to Veneer and Plywood
Rubber Insulating Covers
Standard Specification for Rubber Insulating Sleeves
Conducting Exterior Exposure Tests of Paints on Steel
D 1015
D 1016
D 1025
D 1029
D 1030
D 1034
D 1035
D 1036
D 1037
D 1039
D 1042
D 1043
D 1044
D 1045
D 1047
D 1048
D 1050
D 1052
D 1056
D 1059
D 1053
D 1054
D 1055
D 1060
D 1061
D 1064
D 1067
D 1068
D 1073
D 1091
D 1094
Freezing Points of High-Purity Hydrocarbons
Purity of Hydrocarbons form Freezing Points
Standard Test Method for Nonvolatile Residue of
Polymerization Grade Butadiene
Peeling Resistance of Paper and Paperboard
Fiber Analysis of Paper and Paperboard
Fluor-Chrome-Arsenate-Phenol
Chemical Analysis of Fluor-Chrome-Arsenate-Phenol
Static Tests of Wood Poles
Standard Test Methods for Evaluating Properties of
Wood-Base Fiber and Particle Panel Materials
Glass-Bonded Mica Used as Electrical Insulation
Linear Dimensional Changes of Plastics Under
Accelerated Service Conditions
Stiffness Properties of Plastics as a Function of
Temperature by Means of a Torsion Test
Resistance of Transparent Plastics to Surface Abrasion
Sampling and Testing Plasticizers Used in Plastics
Poly(Vinyl Chloride) Jacket for Wire and Cable
Rubber Insulating Blankets
Rubber Insulating Line Hose
Measuring Rubber Deterioration--Cut Growth Using
Ross Flexing Apparatus
Specification for Flexible Cellular Materials - Sponge or
Expanded Rubber
Yern Number Based on Short-Length Speciments
Rubber Property--Stiffening at Low Temperature
Flexible Polymers and Coated Fabrics
Test Method for Rubber Property - Resilience Using a
Rebound Pendulum
Flexible Cellular Materials--Latex Foam
Core Sampling of Raw Wool in Packages for
Determination of Percentage of Clean Wool Fiber
Present
Asbestos Lap
Iron in Rosin Tall Oil Fatty Acids and Other Related
Products
Acidity or Alkalinity of Water
Iron in Water
Specification for Fine Aggregate for Bituminous Paving
Mixtures
Test Methods for Phosphorus in Lubricating Oils and
Additives
Standard Test Method for Water Reaction of Aviation
Fuels
D 1065
D 1070
D 1071
D 1072
D 1074
D 1075
D 1076
D 1078
D 1079
D 1082
D 1083
D 1125
D 1129
D 113
D 1149
D 1084
D 1092
D 1093
D 1101
D 1102
D 1105
D 1106
D 1107
D 1108
D 1109
D 1117
D 1121
D 1110
D 1113
D 1118
D 1119
Unsaponifiable Matter in Naval Stores, Including Rosin,
Tall Oil, and Related Products
Relative Density of Gaseous Fuels
Standard Test Methods for Volumetric Measurement of
Gaseous Fuel Samples
Total Sulfur in Fuel Gases
Compressive Strength of Bituminous Mixtures
Standard Test Method for Effect of Water on
Compressive Strength of Compacted Bituminous
Mixtures
Rubber--Concentrated, Ammonia Preserved, Creamed,
and Centrifuged Natural Latex
Distillation Range of Volatile Organic Liquids
Terminology Relating to Roofing, Waterproofing, and
Bituminous Materials
Test Method for Dissipation Factor and Permittivity
(Dielectric Constant) of Mica
Mechanical Handling of Unitized Loads and Large
Shipping Cases and Crates
Test Methods for Electrical Conductivity and Resistivity
of Water
Water
Ductility of Bituminous Materials
Test Method for Rubber Deterioration - Surface Ozone
Cracking in a Chamber
Viscosity of Adhesives
Measuring Apparent Viscosity of Lubricating Grases
Acidity of Hydrocarbon Liquids and Their Distillation
Residues
Integrity of Glue Joints in Structural Laminated Wood
Products for Exterior Use
Ash in Wood
Preparation of Extractive-Free Wood
Acid-Insoluble Lignin in Wood
Ethanol-Toluene Solubility of Wood
Dichloromethane Solubles in Wood
1% Sodium Hydroxide Solubility of Wood
Guide for Evaluating Nonwoven Fabrics
Reserve Alkalinity of Engine Coolants and Antirusts
Water Solubility of Wood
Standard Test Method for Vegetable Matter and Other
Alkali-Insoluble Impurities in Scoured Wool
Magnetic Rating of Asbestos Fiber and Products
Standard Test Method for Percent Ash Content of
Engine Coolants and Antirusts
D 1120
D 1122
D 1123
D 1126
D 1131
D 1133
D 1135
D 1141
D 1146
D 1139
D 1140
D 1142
D 1143
D 1144
D 115
D 1152
D 1153
D 1155
D 1148
D 1160
D 1179
D 1183
D 1157
D 1159
D 116
D 1165
D 1166
D 1168
D 1169
Boiling Point of Engine Coolants
Density or Relative Density of Engine Coolant
Concentrates and Engine Coolants By the Hydrometer
Water in Engine Coolant Concentrate by the Karl
Fischer Reagent Method
Hardness in water
Testing Rosin Oils
Standard Test Method for Kauri-Butanol Value of
Hydrocarbon Solvents
Chemical Analysis of Blue Pigments
Preparation of Substitute Ocean Water
Test Method for Blocking Point of Potentially Adhesive
Layers
Aggregate for Single or Multiple Bituminous Surface
Treatments
Standard Test Methods for Amount of Material in Soils
Finer Than the No. 200 (75-μm) Sieve
Standard Test Method for Water Vapor Content of
Gaseous Fuels by Measurement of Dew-Point
Temperature
Piles Under Static Axial Compressive Load
Determining Strength Development of Adhesive Bonds
Testing Solvent Containing Varnishes Used for
Electrical Insulation
Methanol (Methyl Alcohol)
Methyl Isobutyl Ketone
Roundness of Glass Spheres
Rubber Deterioration--Heat and Ultraviolet Light
Discoloration of Light-Colored Surfaces
Test Method for Distillation of Petroleum Products at
Reduced Pressure
Fluoride Ion in Water
Resistance of Adhesives to Cyclic Laboratory Aging
Conditions
Standard Test Method for Total Inhibitor Content (TBC)
of Light Hydrocarbons
Bromine Number of Petroleum Distillates and
Commercial Aliphatic Olefins by Electrometric Titration
Test Methods for Vitrified Ceramic Materials for
Electrical Applications
Nomenclature of Domestic Hardwoods and Softwoods
Methoxyl Groups in Wood and Related Materials
Hydrocarbon Waxes Used for Electrical Insulation
Specific Resistance (Resistivity) of Electrical Insulating
Liquids
D 117
D 1171
D 1184
D 1283
D 129
D 1356
D 1172
D 1173
D 1176
D 1177
D 1185
D 1190
D 120
D 1201
D 1209
D 1186
D 1187
D 1188
D 121
D 1192
D 1193
D 1194
D 1195
D 1196
D 1198
D 1199
D 12
Sampling, Test Methods, Specifications, and Guide for
Electrical Insulating Oils of Petroleum Origin
Rubber Deterioration--Surface Ozone Crackng Outdoors
or Chamber (Triangular Specimens)
Flexural Strength of Adhesive Bonded Laminated
Assemblies
Standard Test Method for Alkali-Solubility of Wools
Test Method for Sulfur in Petroleum Products (General
Bomb Method)
Standard Terminology Relating to Sampling and
Analysis of Atmospheres
pH pf Aqueous Solutions of Soap and Detergents
Foaming Properties of Surface-Active Agents
Sampling and Preparing Aqueous Solutions of Engine
Coolants or Antirusts for Testing Purposes
Freezing Point of Aqueous Engine Coolants
Pallets and Related Structures Employed in Materials
Handling and Shipping
Concrete Join Sealer, Hot-Poured Elastic Type
Standard Specification for Rubber Insulating Gloves
Specification for Thermosetting Polyester Molding
Compounds
Test Method for Color of Clear Liquids (PlatinumCobalt Scale)
Nondestructive Measurement of Dry Film Thickness of
Nonmagnetic Coatings Applied to a Ferrous Base
Asphalt-Base Emulsions for Use as Protective Coatings
for Metal
Bulk Specific Gravity and Density of Compacted
Bituminous Mixtures Using Paraffin-Coated Specimens
Standard Terminology of Coal and Coke
Equipment for Sampling Water and Steam in Closed
Conduits
Reagent Water
Bearing Capacity of Soil for Static Load on Spread
Footings
Repetitive Static Plate Load Tests of Soils and Flexible
Pavement Components, for Use in Evaluation anad
Design of Airport and Highway Pavements
Nonrepetitive Static Plate Load Tests of Soils and
Flexible Pavement Components, for Use in Evaluation
and Design of Airport and Highway Pavements
Solvent Tolrance of Amine Resins
Calcium Carbonate Pigments
Raw Tung Oil
D 1200
D 6537
D 1203
D 1204
D 1208
D 1212
D 1214
D 1218
D 1239
D 1246
D 1210
D 1211
D 1217
D 1258
D 127
D 1223
D 1224
D 1227
D 1229
D 123
D 1230
D 1233
D 1234
D 1238
D 124
D 1240
D 1241
D 1242
D 1243
D 1244
Viscosity by Ford Viscosity Cup
D 6537 - 00
Volatile Loss from Plastics Using Activated Carbon
Methods
Linear Dimensional Changes of Nonrigid Thermoplastic
Sheeting or Film at Elevated Temperature
Common Properties of Certain Pigments
Standard Test Methods for Measurement of Wet Film
Thickness of Organic Coatings
Sieve Analysis of Glass Spheres
Test Method for Refractive Index and Refractive
Dispersion of Hydrocarbon Liquids
Resistance of Plastic Films to Extraction by Chemicals
Test Method for Bromide Ion in Water
Fineness of Dispersion of Pigment-Vehicle Systems by
Hegman-Type Gage
Temperature-Change Resistance of Clear Nitrocellulose
Lacquer Films Applied to Wood
Density and Relative Density (Specific Gravity) of
Liquids by Bingham Pycnometer
Test Methods for High-Gravity Glycerin
Drop Melting Point of Petroleum Wax Including
Petroleum
Specular Gloss of Paper and Paperboard at 75°
Zinc and Cadmium in Paper
Standard Specification for Emulsified Asphalt Used as a
Protective Coating for Roofing
Rubber Property--Compression Set at Low
Temperatures
Textiles
Flammability of Apparel Textiles
Twine Made from Bast and Leaf Fibers
Standard Test Method of Sampling and Testing Staple
Length of Grease Wool
Standard Test Method for Melt Flow Rates of
Thermoplastics by Extrusion Plastometer
Degummed Soybean Oil
Rosin Acid Content of Naval Stores, Including Rosin,
Tall Oil, and Related Products
Standard Specification for Materials for Soil-Aggregate
Subbase, Base, and Surface Courses
Resistance of Plastic Materials to Abrasion
Standard Test Method for Dilute Solution Viscosity of
Vinyl Chloride Polymers
Designation of Yarn Construction
D 1245
D 1248
D 1249
D 1250
D 1251
D 1252
D 6538
D 1253
D 1257
D 1259
D 126
D 1263
D 1264
D 1265
D 1266
D 1267
D 1272
D 1274
D 1275
D 1278
D 128
D 1280
D 1287
D 1290
D 1292
D 1293
D 1282
D 1310
D 1291
D 1294
D 1296
D 1298
Practice for Examination of Water-Formed Deposits by
Chemical Microscopy
Standard Specification for Polyethylene Plastics
Extrusion Materials for Wire and Cable
Octyl Ortho-Phthalate Ester Plasticizers
Petroleum Measurement Tables
Water Vapor Permeability of Packages by Cycle Method
Chemical Oxygen Demand (Dichromate Oxygen
Demand) of Water
D 6538 - 00
Residual Chlorine in Water
High-Gravity Glycerin
Nonvolatile Content of Resin Solutions
Analysis of Yellow, Orange, and Green Pigment
containing Lead Chromate and Chromium Oxide Green
Leakage Tendencies of Automotive Wheel Bearing
Greases
Standard Test Method for Determining the Water
Washout Characteristics of Lubricating Greases
Sampling Liquefield Petroleum (LP) Gases (Manual
Method)
Sulfur in Petroleum Products (Lamp Method)
Standard Test Method for Gage Vapor Pressure of
Liquefied Petroleum (LP) Gases (LP-Gas Method)
Pentachlorophenol
Chemical Analysis of Pentachlorophenol
Corrosive Sulfur in Electrical Insulating Oils
Rubber from Natural Sources--Chemical Analysis
Analysis of Lubricating Grease
Soak Tank Metal Cleaners
pH of Engine Antifreezes, Antirusts, and Coolants
Sediment in water-Emulsion Polishes by Centrifuge
Test Method for Odor in Water
Test Methods for pH of Water
Resistance to Airflow as an Indication of Average Fiber
Diameter of Wool Top, Card Silver, and Scoured Wool
Flash Point and Fire Points of Liquids by Tag Open-Cup
Apparatus
Determining Chlorine Requirement of Demand of
Water, or Both
Standard Test Method for Tensile Strength and Breaking
Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage
Length
Odor of Volatile Solvents and Diluents
Density, Relative Density (Specific Gravity) of API
D 13
D 130
D 1301
D 1304
D 1305
D 1306
D 1308
D 1309
D 1312
D 1316
D 1319
D 1321
D 1322
D 1324
D 1330
D 1335
D 1336
D 1349
D 1325
D 1326
D 1327
D 1329
D 1331
D 1334
D 1337
D 1338
D 1342
D 1343
Gravity of Crude Petroleum and Liquid Petroleum
Products by Hydrometer Method
Spirits of Turpentine
Detection of Copper Corrosion from Petroleum Products
by the Copper Strip Tranish Test
Chemical Analysis of White Lead Pigments
Adhesives Relative to Their Use as Electrical Insulation
Electrical Insulating Paper and Paperboard - Sulfate
(Kraft) Layer Type
Phthalic Anhydride Content of Alkyd Resins and Esters
Containing Other Dibasic Acids (Gravimetric)
Effect of Household Chemicals on Clear and Pigmented
Organic Finishes
Settling Properties of Traffic Paints During Storage
Apparent Free Phenols in Synthetic Phenolic Resins of
Solutions Used for Coating Purposes
Fineness of Grind of Printing Inks by the NPIRI
Grindometer
Test Method for Hydrocarbon Types in Liquid
Petroleum Products by Fluorescent Indicator Adsorption
Needle Penetration of Petroleum Waxes
Smoke Point of Kerosine and Aviation Turbine Fuel
Modified Wood
Specification for Rubber Sheet Gaskets
Tuft Bind of Pile Yarn Floor Coverings
Distortion of Yarn in Woven Fabrics
Rubber -- Standard Temperature for Testing
Ammoniacal Copper Arsenate and Ammoniacal Copper
Zinc Arsenate
Chemical Analysis of Ammoniacal Copper Arsenate and
Ammoniacal Copper Zinc Arsenate
Bitumen-Saturated Woven Burlap Fabrics Used in
Roofing and Waterproofing
Evaluating Rubber Property--Retraction at Lower
Temperatures (TR Test)
Surface and Interfacial Tension of Solutions of SurfaceActive Agents
Test Method for Wool Content of Raw Wool---Commercial Scale
Storage Life of Adhesives by Consistency and Bond
Strength
Working Life of Liquid or Paste Adhesives by
Consistency and Bond Strength
Paraffin-Type Hydrocarbons in Carnauba Wax
Viscosity of Cellulose Derivatives by Ball-Drop Method
D 1347
D 1348
D 1351
D 1352
D 1353
D 1357
D 1363
D 1367
D 1385
D 1369
D 1358
D 1364
D 1366
D 1370
D 1374
D 1384
D 1387
D 1388
D 1389
D 139
D 1394
D 1399
D 140
D 1396
D 1397
D 1398
D 1400
D 1403
D 1405
Methylcellulose
Moisture in Cellulose
Polythlene Insulation for Electrical Wire and Cable
Ozone-Resisting Butyl Rubber Insulation for Wire and
Cable
Test Method for Nonvolatile Matter in Volatile Solvents
for Use in Paint, Varnish, Lacquer, and Related Products
Standard Practice for Planning the Sampling of the
Ambient Atmosphere
Permanganate Time of Acetone and Methanol
Standard Test Method for Lubricating Qualities of
Graphites
Standard Test Method for Hydrazine in Water
Standard Practice for Quantities of Materials for
Bituminous Surface Treatments
Spectrophotometric Diene Value of Dehydrated Castor
Oil and Its Derivatives
Water in Volatile Solvents (Karl Fischer Reagent
Titration Method)
Reporting Practicle Size Characteristics of Pigments
Test Method for Contact Compatibility Between
Asphaltic Materials (Oliensis Test)
Metal Cleaners
Corrosion Test for Engine Coolants in Glassware
Sponification Number (Empirical) of Synthetic and
Natural Waxes
Stiffness of Fabrics
Proof-Voltage Testing of Thin Solid Electrical
Insulating Materials
Float Test for Bituminous Materials
Chemical Analysis of White Titanium Pigments
Test Method for Unsaponifiable Contents of Tricresyl
Phosphate
Sampling Bituminous Materials
Chemical Analysis of Poly (Vinyl Butyral)
Unsaponifiable Matter in Alkyd Resins and Resin
Solutions
Fatty Acid Content of Alkyd Resins and Alkyd Resin
Solutions
Test Method for Nondestructive Measurement of Dry
Film Thickness of Nonconductive Coatings Applied to a
Nonferrous Metal Base
Cone Penetration of Lubricating Grease Using OneQuarter and One-Half Scale Cone Equipment
Standard Test Method for Estimation of Net Heat of
D 1411
D 1413
D 1414
D 1418
D 1404
D 1412
D 1422
D 1415
D 1417
D 1423
D 1424
D 1425
D 1426
D 1429
D 143
D 1430
D 1434
D 1435
D 1436
D 1439
D 1441
D 1475
D 1440
D 1442
D 1445
D 1447
Combustion of Aviation Fuels
Water-Soluble Chlorides Present as Admixtures in
Graded Aggregate Road Mixes
Wood Preservatives by Laboratory Soil-Block Cultures1
Standard Test Methods for Rubber O-Rings
Standard Practice for Rubber and Rubber Latices Nomenclature
Estimating of Deleterious Particles in Lubricating
Grease
Equilibrium Moisture of Coal at 96 to 97 Percent
Relatice Humidity and 30°C
Test Method for Twist in Single Spun Yarns by the
Untwist-Retwist Method
Rubber Property--International Hardness
Rubber Latices--Synthetic
Test Method for Twist in Yarns by Direct-Counting
Tearing Strength of Fabrics by Falling-Pendulum Type
(Elmendorf) Apparatus
Unevenness of Textile Strands Using Capacitance
Testing Equipment
Ammonia Nitrogen in Water
Test Methods for Specific Gravity of Water and Brine
Standard Test Methods for Small Clear Specimens of
Timber
Standard Classification System for
Polychlorotrifluoroethylene (PCTFE) Plastics
Determining Gas Permeability Characteristics of Plastic
Film and Sheeting
Practice for Outdoor Weathering of Plastics
Application of Emulsion Floor Polishes to Substrates for
Testing Purposes
Sodium Carboxymethylcellulose
Standard Practice for Sampling Cotton Fibers for
Testing
Density of Liquid Coatings, Inks, and Related Products
Length and Length Distribution of Cotton Fibers (Array
Method)
Standard Test Method for Maturity of Cotton Fibers
(Sodium Hydroxide Swelling and Polarized Light
Procedures)
Breaking Strength and Elongation of Cotton Fibers (Flat
Bundle Method)
Standard Test Method for Length and Length
Uniformity of Cotton Fibers by Fibrograph
Measurement
D 1448
D 1452
D 1455
D 1456
D 1458
D 1459
D 1488
D 1506
D 1508
D 1509
D 146
D 1460
D 1461
D 1462
D 1464
D 1465
D 1466
D 1467
D 1468
D 1469
D 1511
D 1512
D 1513
D 1514
D 1474
D 1475
D 1476
D 1478
D 1483
D 1489
Micronaire Reading of Cotton Fibers
Standard Practice for Soil Investigation and Sampling
by Auger Borings
60° Specular Gloss of Emulsion Floor Polishes to
Substrates for Testing Purposes
Rubber Property--Elongation at Specific Stress
Fully Cured Silicone Rubber-Coated Glass Fabric adn
Tapes for Electrical Insulation
Silicone Varnished Glass Cloth and Tape for Electrical
Insulation
Test Method for Amylaceous Matter in Adhesives
Standard Test Methods for Carbon Black - Ash Content
Carbon Black, Pelleted Fines and Attrition
Test Methods for Carbon Black - Heating Loss
Sampling and Testing Bitumen-Saturated Felts and
Woven Fabrics for Roofing and Waterproofing
Rubber Property--Change in Length During Liquid
Immersion
Standard Test Method for Moisture or Volatile
Distillates in Bituminous Paving Mixtures
Refined Soybean Oil
Differential Dyeing Behavior of Cotton
Standard Test Method for Blocking and Picking Points
of Petroleum Wax
Sampling Liquid Oils and Fatty Acids Commonly Used
in Paints, Varnishes, and Related Materials
Testing Fatty Acids Used in Protective Coatings
Standard Test Method for Volatile Matter in Tricresyl
Phosphate
Standard Test Method for Total Rosin Acids Content of
Coating Vehicles
Standard Test Method for Carbon Black - Pellet Size
Distribution
Test Methods for Carbon Black - pH Value
Carbon Black, Pelleted -- Pour Density
Test Method for Carbon Black - Sieve Residue
Indentation Hardness of Organic Coatings
Density of Paint, Varnish, Lacquer, and Related
Products
Standard Test Method for Heptane Miscibility of
Lacquer Solvents
Low-Temperature Torque of Ball Bearing Grease
Oil Absorption of Pigments by Gardner-Colemen
Method
Nonvolatile Content of Aqueous Adhesives
D 1498
D 1480
D 1481
D 1485
D 1499
D 1505
D 149
D 1490
D 1492
D 1493
D 1494
D 150
D 1500
D 1510
D 1516
D 1517
D 1518
D 1519
D 1525
D 1523
D 1524
D 153
D 1531
D 1533
D 1535
D 1537
Standard Practice for Oxidation-Reduction Potential of
Water
Density and Relative Density (Specific Gravity) of
Viscous Materials by Bingham Pynometer
Density and Relative D3nsity (Specific Gravity) of
Viscous Materials by Lipkin Bicapillary Pycnometer
Rubber from Natural Sources---Sampling and Sample
Preparation
Filtered Open-Flame Carbaaon-Arc Exposures of
Plastics
Density of Plastics by the Density-Gradient Technique
Dielectric Breakdown Voltage and Dielectric Strength
of Solid Insulating Materials at Commercial Power
Frequencies
Nonvolatile Content of Urea-Formaldehyde Resin
Solutions
Standard Test Method for Bromine Index of Aromatic
Hydrocarbons by Coulometric Titration
Solidification Point of Industrial Organic Chemicals
Diffuse Light Transmission Factor of Reinforced
Plastics Panels
AC Loss Characteristics and Permittivity (Dielectric
Constant) of Solid Electrical Insulation
ASTM Color of Petroleum Products (ASTM Color
Scale)
Carbon Black--Iodine Adsorption Number
Width of Leather
Terminology Relating to Leather
Thermal Transmittance of Textile Materials
Standard Test Method for Rubber Chemicals - Melting
Range
Test Method for Vicat Softening Temperature of Plastics
Standard Specification for Synthetic Rubber Insulation
for Wire and Cable, 90°C Operation
Visual Examination of Used Electrical Insulating Oils of
Petroleum Origin in the Field
Specific Gravity of Pigments
Standard Test Methods for Relative Permittivity
(Dielectric Constant) and Dissipation Factor by Fluid
Displacement Procedures
Test Method for Water in Insulating Liquids by
Coulometric Karl Fischer Titration
Standard Practice for Specifying Color by the Munsell
System
Distilled Soybean Fatty Acids
D 1527
D 1534
D 1538
D 1550
D 1566
D 1568
D 1576
D 1539
D 154
D 1541
D 1542
D 1544
D 1545
D 1546
D 1552
D 1554
D 1555
D 1577
D 1583
D 1586
D 1612
D 1555M
D 1556
D 1557
D 156
D 1560
D 1561
D 1558
Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe,
Schedules 40 and 80
Approximate Acidity of Used Electrical Insulating
Liquids by Color-Indicator Titration
Distilled Linseed Fatty Acids
Standard ASTM Butadiene Measurement Tables
Standard Terminology Relating to Rubber
Sampling and Chemical Analysis of
AlkylbenzeneSulfonates
Standard Test Method for Moisture in Wool by OvenDrying
Dehydrated Castor Acids
Testing Varnishes
Tatal Iodine Value of Drying Oils and Their Derivatives
Qualitative Detection of Rosin in Varnishes
Color of Transparent Liquids (Gardner Color Scale)
Viscosity of Transparent Liquids by Bubble Time
Method
Testing the Performance of Clear Floor Sealers
Standard Test Method for Sulfur in Petroleum Products
(High-Temperature Method)
Standard Terminology Relating to Wood-Base Fiber and
Particle Panel Materials
Test Method for Calculation of Volume and Weight of
Industrial Aromatic Hydrocarbons
Linear Density of Textile Fibers
Standard Test Method for Hydrogen Ion Concentration
of Dry Adhesive Films
Penetration Test and Split-Barrel Sampling of Soils
Test Method for Acetone in Methanol
Test Method for Calculation of Volume and Weight of
Industrial Aromatic Hydrocarbons [Metric]
Density and Unit Weight of Soil in Place by the SandCone Method
Standard Test Methods for Laboratory Compaction
Characteristics of Soil Using Modified Effort (56,000 ftlbf/ft³ (2,700 kN-m/m³))
Test Method for Saybolt Color of Petroleum Products
(Saybolt Chromometer Method)
Test Methods for Resistance to Deformation and
Cohesion of Bituminous Mixtures by Means of Hveem
Apparatus
Practice for Preparation of Bituminous Mixture Test
Specimens by Means of California Kneading Compactor
Moisture Content Penetration Resistance Relationships
D 1562
D 1567
D 1569
D 1570
D 1747
D 187
D 2176
D 1571
D 1573
D 1574
D 1575
D 1578
D 1579
D 1582
D 1585
D 1587
D 1593
D 16
D 1600
D 1601
D 1596
D 1599
D 1603
D 1607
D 1598
D 1608
D 1610
D 1611
D 1613
of Fine-Grained Soils
Cellulose Acetate Propionate Molding and Extrusion
Compounds
Detergent Cleaners for Evaluation of Corrsive Effects on
Porcelain Enamels
Detergent Alkylate
Sampling and Chemical Analysis of Fatty Alkyl Sulfates
Refractive Index of Viscous Materials
Burning Quality of Kerosine
Folding Endurance of Paper by the M.I.T. Tester
Woven Asbestos Cloth
Heat Aging of Asbestos Textiles
Extractable Matter in Wool and Other Animal Fibers
Standard Test Method for Fiber Length of Wool in
Scoured Wool and in Card Sliver
Breaking Strength of Yarn in Skein Form
Filler Content of Phenol, Resorcinol, and Melamine
Adhesives
Nonvolatile Content of Liquid Phenol, Resorcinol, and
Melamine Adhesives
Fatty Acids Content of Naval Stores, Including Rosin,
Tall Oil, and Related Products
Standard Practice for Thin-Walled Tube Sampling of
Soils for Geotechnical Purposes
Nonrigid Vinyl Chloride Plastic Sheeting
Paint, Related Coatings, Materials, and Applications
Terminology for Abbreviated Terms Relating to Plastics
Test Method for Dilute Solution Viscosity of Ethylene
Polymers
Shock Absorbing Characteristics of Package Cushioning
Materials
Test Method for Resistance to Short-Time Hydraulic
Pressure of Plastic Pipe, Tubing, and Fittings
Carbon Black in Olefin Plastics
Standard Test Method for Nitrogen Dioxide Content of
the Atmosphere (Griess-Saltzman Reaction)
Time-to-Failure of Plastic Pipe Under Constant Internal
Pressure
Oxides of Nitrogen in Gaseous Combustion Products
(Phenol-Disulfonic Acid Procedures)
Standard Practice for Conditioning Leather and Leather
Products for Testing
Corrosion Produced by Leather in Contact with Metal
Test Method for Acidity in Volatile Solvents and
Chemical Intermediates Used in Paint, Varnish,
D 1614
D 1615
D 1617
D 1622
D 1618
D 1619
D 1621
D 1623
D 1624
D 1625
D 1627
D 1628
D 1630
D 1633
D 1636
D 1647
D 1649
D 1639
D 1640
D 1641
D 1631
D 1632
D 1634
D 1635
D 1642
D 1646
D 1653
D 1655
D 1725
D 1735
Lacquer, and Related Products
Alkalinity in Acetone
Glycerol, Ethylene Glycol, and Pentaerythritol in Alkyd
Resins
Standard Test Method for Ester Value of Solvents and
Thinners
Apparent Density of Rigid Cellular Plastics
Carbon Black Extractables--Toluene Discoloration
Carbon Black--Sulfur Content
Compressive Properties of Rigid Cellular Plastics
Tensile and Tensile Adhesion Properties of Rigid
Cellular Plastics
Acid Copper Chromate
Chromated Copper Arsenate
Chemical Analysis of Acid Copper Chromate
Chemical Analysis of Chromated Copper Arsenate
Standard Test Method for Rubber Property - Abrasion
Resistance (Footwear Abrader)
Test Methods for Compressive Strength of Molded SoilCement Cylinders
Specification for Allyl Molding Compounds
Resistance of Dried Films of Varnishes to Water and
Alkali
Standard Specification for Strontium Chromate Pigment
Acid Value of Organic Coating Materials
Test Methods for Drying, Curing, or Film Formation of
Organic Coatings at Room Temperature
Exterior Durability of Varnishes
Water in Phenol and Related Materials by the Iodine
Reagent Method
Making and Curing Soil-Cement Compression and
Flexure Test Specimens in the Laboratory
Compressive Strength of Soil-Cement Using Portions of
Beams Broken in Flexure (Modified Cube Method)
Flexural Strength of Soil-Cement Using Simple Beam
with Third-Point Loading
Elasticity or Toughness of Varnishes
Standard Test Methods for Rubber - Viscosity, Stress
Relaxation, and Pre-Vulcanization Characteristics
(Mooney Viscometer)
Test Methods for Water Vapor Transmission of Organic
Coating Films
Standard Specification for Aviation Turbine Fuels
Viscosity of Resin Solutions
Practice for Testing Water Resistance of Coatings Using
D 1648
D 1652
D 1654
D 1662
D 1665
D 1666
D 1667
D 1668
D 1669
D 1685
D 1693
D 1673
D 1675
D 167
D 1670
D 1676
D 1677
D 1679
D 168
D 1681
D 2192
D 2193
D 2195
D 1684
D 1686
D 1687
Water Fog Apparatus
Basic Lead Silicochromate Pigment
Epoxy Content of Epoxy Resins
Evaluation of Painted or Coated Specimens Subjected to
Corrosive Environments
Active Sulfur in Cutting Oils
Engler Specific Viscosity of Tar Products
Conducting Machining Tests of Wood and-Base
Materials
Flexible Cellular Materials--Vinyl Chloride Polymers
and Copolymers (Closed-Cell Foam)
Glass Fabrics (Woven and Treated) for Roofing and
Waterproofing
Preparation of Test Panels for Accelerated and Outdoor
Weathering of Bituminous Coatings
Test Method for Traces of Thiophene in Benzene by
Spectrophotometry
Test Method for Environmental Stress-Cracking of
Ethylene Plastics
Relative Permittivity and Dissipation Factor of
Expanded Cellular Polymers Used for Electrical
Insulation
Polytetrafluoroethylene Tubing
Apparent and True Specific Gravity and Porosity of
Lump Coke
Failure End Point in Accelerated and Outdoor
Weathering of Bituminous Materials
Film-Insulated Magnet Wire
Sampling and Testing Untreated Mica Paper Used for
Electrical Insulation
Synthetic Rubber Heat- and Moisture-Resisting
Insulation for Wire and Cable, 75°C Operation
Coke Residue of Creosote
Synthetic Anionic Active Ingredient in Detergents by
Cationic Titration Procedure
Standard Test Method for Purity of Aldehydes and
Ketones
Standard Test Method for Hydroquinone in Vinyl
Acetate
Test Methods for Pentaerythritol
Lighting Cotton Classing Rooms for Color Grading
Standard Test Method for Color of Solid Aromatic
Hydrocarbons and Related Materials in the Molten State
(Platinum-Cobalt Scale
Chromium in Water
D 1688
D 1691
D 1694
D 1695
D 1696
D 1698
D 1701
D 1719
D 1722
D 1709
D 6660
D 1704/D 1704M
D 1708
D 1710
D 1711
D 1712
D 1718
D 1720
D 1721
D 1726
D 1729
D 1732
D 1734
D 173
D 1730
D 1731
D 1739
D 1740
Copper in Water
Zinc in Water
Standard Specification for Threads 60° (Stub) for
"Fiberglass" (Glass-Fiber-Reinforced ThermosettingResin) Pipe
Dellulose and Cellulose Derivatives
Solubility of Cellulose in Sodium Hydroxide
Sediments and Soluble in Service-Aged Insulating Oils
Scavenger Content of Askarels
Specification for Isobutyl Alcohol
Water Miscibility of Water-Soluble Solvents
Impact Resistance of Plastic Film by the Free-Falling
Dart Method
Standard Test Method for Freezing Point of Aqueous
Ethylene Glycol Base Engine Coolants by Automatic
Phase Transition Method
Determining the Amount of Particulate Matter in the
Atmosphere by Measurement of the Light Absorbance
of a Filtered Sample
Tensile Properties of Plastics By Use of Microtensile
Specimens
Specification for Extruded and Compression Molded
Polytetrafluoroethylene (PTFE) Rod and Heavy Walled
Tubing
Electrical Insulation
Resistance of Plastics to Sulfide Staining
Isobutyl Acetate (95% Grade)
Standard Test Method for Dilution Ratio of Active
Solvents in Cellulose Nitrate Solutions
Standard Test Method for Permanganate Time of
Tricresyl Phosphate
Test Methods for Hydrolyzable Chloride Content of
Liquid Epoxy Resins
Visual Appraisal of Colors and Color Differences of
Diffusely-Illuminated Opaque Materials
Preparation of Magnesium Alloy Surfaces for Painting
Making Cemintitious Panels for Testing Coatings
BitumenSaturated Cotton Fabrics Used in Roofing and
Waterproofing
Preparation of Aluminum and Aluminum-Alloy
Surfaces For Painting
Preparation of Hot-dip Aluminium Surfaces for Painting
Collection and Measurement of Dustfall (Settleable
Particulate Matter)
Luminometer Numbers of Aviation Turbine Fuels
D 1742
D 1743
D 1744
D 1746
D 1748
D 1761
D 1763
D 1765
D 1755
D 1749
D 1751
D 1752
D 1754
D 1756
D 1757
D 1758
D 176
D 1760
D 1776
D 1814
D 1837
D 1869
D 1762
D 1764
D 1766
D 1767
D 1768
Test Method for Oil Separation from Lubricating Grease
During Storage
Standard Test Method for Determining Corrosion
Preventive Properties of Lubricating Greases
Determination of Water in Liquid Petroleum Products
by Karl Fischer Regent
Transparency of Plastic Sheeting
Standard Test Method for Rust Protection by Metal
Preservatives in the Humidity Cabinet
Standard Test Methods for Mechanical Fasteners in
Wood
Standard Specification for Epoxy Resins
Standard Classification System for Carbon Blacks Used
in Rubber Products
Poly(Vinyl Chloride) Resins
Interlaboratory Evaluation of Test Methods Used with
Paper and Paper Products
Preformed Expansion Joint Filler for Concrete Paving
and Structural Construction (Nonextruding and Resilient
Bituminous Types)
Preformed Sponge Rubber and Cork Expansion Joint
Fillers for Concrete Paving and Structural Construction
Effect of Heat and Air on Asphaltic Materials (ThinFilm Oven Test)
Standard Test Method for Determination as Carbon
Dioxide of Carbonate Carbon in Coal
Sulfur in Ash from Coal and Coke
Evaluating Wood Presevatives by Field Tests with
Stakes
Standard Test Methods for Solid Filling and Treating
Compounds Used for Electrical Insulation
Pressure Treatment of Timber Products
Conditioning and Testing Textiles
Test Method for Measuring Thickness of Leather Units
Standard Test Method for Volatility of Liquefied
Petroleum (LP) Gases
Specification for Rubber Rings for Asbestos-Cement
Pipe
Chemical Analysis of Wood Charcoal
Rubber Latex Products for Automotive Applications
Rubber Chemicals--Solubility
Ethylene Diamine Tetraacetate (EDTA) in Soaps
Synthetic Detergents
Sodium Alkabenzene Sulfonate in Synthetic Detergents
by Ultraviolet Absorption
D 1770
D 1774
D 1777
D 178
D 1783
D 1790
D 1775
D 1813
D 1780
D 1781
D 1782
D 1784
D 1785
D 1786
D 1791
D 1792
D 1793
D 6539
D 1795
D 1796
D 1799
D 1807
D 1810
D 1815
D 1817
D 1831
D 1832
D 1833
D 1836
D 1821
D 1816
Test Method for Neps, Vegetable Matter, and Colored
Fiber in Wool Top
Elastic Properties of Textile Fibers
Thickness of Textiles Materials
Standard Specification for Rubber Insulating Matting
Standard Test Methods for Phenolic Compounds in
Water
Test Method for Brittleness Temperature of Plastic
Sheeting by Impact
Tension and Elongation of Wide Elastic Fabrics
(Constant-Rate-of-Load Type Tensile Testing Machine)
Test Method for Measuring Thickness of Leather Test
Specimens
Conducting Creep Tests of Metal-to-Metal Adhesives
Climbing Drum Peel Test for Adhesives
Standard Test Methods for Operating Performance of
Particulate Cation-Exchange Materials
Rigid Poly(Vinyl Chloride) (PVC) Compounds and
Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40,
80, and 120
Toluene Diisocyanate
Accelerated Aging of Liquid Water-Emulsion Floor
Polishes
Long Term Removability Properties of Emulsion Floor
Polishes
Water Spotting of Emulsion Floor Polishes
D 6539 - 00
Intrinsic Viscosity of Cellulose
Water and Sediment in Fuel Oils by the Contrifuge
Method (Laboratory Procedure)
Carbon Black--Sampling Packaged Shipments
Test Methods for Refractive Index and Specific Optical
Dispersion of Electrical Insulating Liquids
Specific Gravity of Askarels
Water Absorption (Static) of Vegetable Tanned Leather
Rubber Chemicals--Density
Standard Test Method for Roll Stability of Lubricating
Grease
Peroxide Number of Petroleum Wax
Odor of Petroleum Wax
Specification for Commercial Hexanes
Inorganic Chlorides in Askarels
Dielectric Breakdown Voltage of Insulating Oils of
Petroleum Origin Using VDE Electrodes
D 1820
D 1822
D 1823
D 1824
D 1825
D 1826
D 1827
D 1828
D 1829
D 1830
D 1834
D 1835
D 1838
D 1839
D 1840
D 1841
D 1842
D 1857
D 1864
D 1865
D 1844
D 1843
D 1845
D 1847
D 1848
D 1849
D 185
D 1854
Hydrolyzable Chlorine Compounds in Chlorinated
Aromatic Hydrocarbons (Askarels)
Tensile-Impact Energy to Break Plastics and Electrical
Insulating Materials
Apparent Viscosity of Plastisols and Organosols at High
Shear Rates by Extrusion Viscometer
Apparent Viscosity of Plastisols and Organosols at Low
Shear Rates by Brookfield Viscometer
Etching and Cleaning Copper-Clad Electrical Insulating
Materials and Thermosetting Laminates for Electrical
Testing
Calorfic (Heating) Value of Gases in Natureal Gas
Range by Continous Recording Calorimeter
Gas Content (Nonacidic) of Insulating Liquids by
Displacement with Carbon Dioxide
Atmospheric Exposure of Adhesive-Bonded Joints and
Structures
Test Method for Electrical Resistance of Ceramic
Materials at Elevated Temperatures
Thermal Endurance of Flexible Sheet Materials Used for
Electrical Insulation by the Curved Electrode Method
Standard Test Method for 20° Specular Gloss of
Waxed Paper
Liquified Petroleum (LP) Gases
Standard Test Method for Copper Strip Corrosion by
Liquefied Petroleum (LP) Gases
Amyl Nitrate in Diesel Fuels
Naphthalene Hydrocarbons in AviationTurbine Fuels
Ultraviolet-Spectrophotometry
Distilled Coconut Fatty Acids
Distilled Corn Fatty Acids
Standard Test Method for Fusibility of Coal and Coke
Ash
Moisture in Mineral Aggregate Used on Built-Up Roofs
Hardness of Mineral Aggregate Used on Built-Up Roofs
Chemical Analysis of Basic Lead Silicochromate
Fractionated anmd Distilled Cottonseed Fatty Acids
Chemical Analysis of Strontium Chromate Pigment
Total Chlorine Content of Epoxy Resins
Reporting Paint Film Failures Characteristic of Exterior
Latex Paints
Package Stability of Paint
Coarse Particles in Pigments, Pastes, and Paints
Jet-Fuel-Resistant Concrete Joint Sealer, Hot-Applied
Elastic Type
D 1856
D 1858
D 6541
D 1859
D 1860
D 1863
D 1867
D 1868
D 1871
D 1874
D 1875
D 1876
D 1879
D 1883
D 1889
D 1896
D 1881
D 1882
D 1886
D 189
D 1890
D 1894
D 1895
D 1900
D 1901
D 1907
D 1926
D 1968
D 1969
D 1903
Recovery of Asphalt from Solution by Abson Method
Creosote-Petroleum Solution
D 6541 - 00
Petroleum for Blending with Creosote
Moisture and Creosote-Type Preservative in Wood
Standard Specification for Mineral Aggregate Used on
Built-Up Roofs
Copper-Clad Thermosetting Laminates for Printed
Wiring
Detection and Measurement of Partial Discharge
(Corona) Pulses in Evaluation of Insulation Systems
Adhesion of Single-Filament Steel Wire to Rubber
Water- or Solvent-Soluble Liquid Adhesives for
Automatic Machine Sealing of Top Flaps of Fiberboard
Shipping Cases
Density of Adhesives in Fluid Form
Peel Resistance of Adhesives (T-Peel Test)
Exposure of Adhesive Specimens to High-Energy
Radiation
CBR (California Bearing Ratio) of LaboratoryCompacted Soils
Test Method for Turbidity of Water
Practice for Transfer Molding Test Specimens of
Thermosetting Compounds
Foaming Tendencies of Engine Coolants in Glassware
Cooling System Chemical Solutions on Organic
Finishes for Automotive Vehicles
Nickel in Water
Conradson Carbon Residue of Petroleum Products
Reta Partical Radioactivity of Water
Standard Test Method for Static and Kinetic
Coefficients of Friction of Plastic Film and Sheeting
Apparent Density, Bulk Factor, and Pourability of
Plastic Materials
Carbon Black--Sampling Bulk Shipments
Relative Evaporation Time of Halogenated Organic
Solvents and Their Admixtures
Linear Density of Yarn (Yarn Number) by the Skein
Method
Standard Test Methods for Carboxyl Content of
Cellulose
Paper and Paper Products
Standard Specification for 2-Ethylhexanol
Coefficient of Thermal Expansion of Electrical
Insulating Liquids of Petroleum Origin, and Askarels
D 1909
D 1912
D 1913
D 1914
D 1915
D 1916
D 1918
D 1974
D 202
D 1917
D 1921
D 1922
D 1928
D 1929
D 1931
D 1932
D 1933
D 1934
D 1937
D 1938
D 1939
D 1941
D 1943
D 1945
D 1946
D 1950
D 1951
D 1954
Textile Fibers
Cold-Crack Resistance of Upholstery Leather
Resistance to Wetting of Garment-Type Leathers (Spray
Test)
Conversion Units and Factors Relating to Atmo0spheric
Analysis
Chromatographic Analysis of Chemically Refined
Cellulose
Penetration of Adhesives
Asbestos Content of Asbestos Textiles
Methods of Closing, Sealing, and Reinforcing
Fiberboard Boxes
Sampling and Testing Untreated Paper Used for
Electrical Insulation
Rubber Property--Shrinkage fo Raw and Compounded
Hot-Polymerized
Particle Size (Sieve Analysis) of Plastic Materials
Standard Test Method for Propagation Tear Resistance
of Plastic Film and Thin Sheeting by Pendulum Method
Preparation of Compression-Molded Polyethylene Test
Sheets and Test Specimens
Determining Ignition Temperature of Plastics
Fully Cured Silicone Rubber-Coated Glass Fabric and
Tapes for Electrical Insulation
Thermal Endurance of Flexible Electrical Insulating
Varnishes
Nitrogen Gas as an Electrical Insulating Material
Test Method for Oxidative Aging of Electrical
Insulating Petroleum Oils by Open-Beaker Method
Carbon Black, Pelleted--Mass Strength
Tear Propagation Resistance of Plastic Film and Thin
Sheeting by a Single-Tear Method
Determining Residual Stresses in Extruded or Molded
Acrylonitrile-Butadiene-Styrene (ABS) Parts by
Immersion in Glacial Acetic Acid
Standard Test Method for Open Channel Flow
Measurement of Water with the Parshall Flume
Alpha Particle Radioactivity of Water
Standard Test Method for Analysis of Natural Gas by
Gas Chromatography
Standard Practice for Analysis of Reformed Gas by Gas
Chromatography
Acetone Tolerance ofr Heat-Bodied Drying Oils
Ash in Drying Oils and Fatty Acids
Foots in Raw Linseed Oil (Volumetric Method)
D 1955
D 1957
D 1952
D 1958
D 1959
D 1960
D 1962
D 1963
D 1964
D 1965
D 1966
D 1967
D 197
D 1970
D 1971
D 1972
D 1973
D 1975
D 1976
D 1982
D 20
D 2013
D 1978
D 1977
D 1979
D 198
D 1980
D 1981
D 1983
D 1984
D 1985
Gel Time of Drying Oils
Hydroxyl Value of Fatty Oils and Acids
Quantitative Determination of Break in Drying Oils
Chloroform Insoluble Matter in Oiticica Oil
Iodine Value of Drying Oils and Fatty Acids
Loss on Heating of Drying Oils
Saponification Value of Drying Oils, Fatty Acids, and
Polymerized Fatty Acids
Specific Gravity of Drying Oils, Varnishes, Resins, and
Related Materials at 25/25°C
Tung Oil Quality
Unsaponifiable Matter in Drying Oils, Fatty Acids, and
Polymerized Fatty Acids
Foots in Raw Linseed Oil (Gravimetric Method)
Measuring Color After Heating of Drying Oils
Sampling and Fineness Test of Pulverized Coal
Specification for Self-Adhering Polymer Modified
Bituminous Sheet Materials Used as Steep Roofing
Underpayment for Ice Dam Protection
Digestion of Samples for Determination of Metals by
Flame Atomic Absorption or Plasma Emission
Spectroscopy
Generic Marking of Plastic Products
Design of a Liner System for Containment of Wastes
Environmental Stress Crack Resistance of Plastic
Injection Molded Open Head Pails
Elements in Water by Inductively-Coupled Argon
Plasma Atomic Emission Spectroscopy
Test Method for Titer of Fatty Acids
Distillation of Road Tars
Standard Practice for Preparing Coal Samples for
Analysis
Analysis of Electrocoat Bath Samples
Nickel and Vanadium in FCC Equilibrium Catalysts by
Hydrofluoric/Sulfuric Acid Decomposition and Atomic
Spectroscopic Analysis
Free Formaldehyde Content of Amino Resins
Static Tests of Lumber in Structural Sizes
Acid Value of Fatty Acids and Polymerized Fatty Acids
Measuring Color After Heating of Fatty Acids
Fatty Acid Composition by Gas-Liquid Chromatography
of Methyl Esters
Tall Oil Fatty Acids
Preparing Concrete Blocks for Testing Sealants, for
Joints and Cracks
D 6542
D 1986
D 1987
D 1988
D 1989
D 1990
D 1991
D 1992
D 1993
D 1994
D 1998
D 2000
D 2001
D 1995
D 1996
D 1997
D 1999
D 2007
D 2008
D 2010/D 2010M
D 2014
D 2015
D 2017
D 2019
D 2020
D 6542 - 00
Determining the Apparent Viscosity of Polythylene Wax
Biological Clogging of Geotextile or Soil/Geotextile
Fillers
Standard Test Method for Mercaptans in Natural Gas
Using Length-of-Stain Detector Tubes
Gross Calorific Value of Coal and Coke by
Microprocessor Controlled Isoperibol Calorimeters
Standard Practice for Establishing Allowable Properties
for Visually-Graded Dimension Lumber from In-Grade
Tests of Full-Size Specimens
Rubber Chemicals--2-Mercaptobenzothiazole (MBT)-Assay
Testing Synthetic Plasticizers Used in Rubber
Precipitated Silica--Surface Area by Multipoint BET
Nitrogen Adsorption
Standard Test Method for Determination of Acid
Numbers of Hot-Melt Adhesives
Polyethylene Upright Storage Tanks
Standard Classification System for Rubber Products in
Automotive Applications
Depentanization of Gasoline and Naphthas
Multi-Modal Strength of Autoadhesives (Contact
Adhesives)
Determination of Phenolic Antioxidants and Erucamide
Slip Additives in Low Density Polyethylene Using
Liquid Chromatographt (LC)
Laboratory Determination of the Fibre Content of Peat
Samples by Dry Mass
Selection of Specimens and Test Parameters from
ISO/IEC Standards
Characteristic Groups in Rubber Extender and
Processing Oils and Other Petroleum-Derived Oils by
the Clay-Gel Absorption Chromatographic Method
Ultraviolet Absorbance and Absorptivity of Petroleum
Products
Evaluation of Total Sulfation Activity in the Lead
Dioxide Technique
Expansion or Contraction of Coal by the Sole-Heated
Oven
Test Method for Gross Calorific Value of Coal and
Coke by the Adiabatic Bomb Calorimeter
Accelerated Laboratory Test of Natural Decay
Resistance of Woods
Dirt in Paper and Paperboard
Mildew (Fungus) Resistance of Paper and Paperboard
D 2021
D 2022
D 2023
D 2024
D 2035
D 2036
D 204
D 2060
D 2026
D 2027
D 2028
D 2029
D 2030
D 2031
D 2041
D 2042
D 2043
D 2095
D 217
D 2175
D 2047
D 2048
D 2050
D 2051
D 2052
D 2053
D 2054
D 2057
D 2058
D 2059
D 2061
D 2062
D 2063
D 2064
D 2065
Neutral Detergent, 40 Percent Alkylbenzene Sulfonate
Type
Samplingand Chemical Analysis of Chlorine-Containing
Bleaches
Sodium Toluene Sulfonate in Detergents
CloudPoint of Nonionic Surfactants
Practice for Coagulation-Flocculation Jar Test of Water
Cyanides in Water
Sewing Threads
Standard Test Methods for Measuring Zipper
Dimensions
Cutback Asphalt (Slow-Curing Type)
Cutback Asphalt (Medium-Curing Type)
Cutback Asphalt (Rapid-Curing Type)
Water Vapor Content of Electrical Petroleum Insulating
Gases by Measurement of Dew Point
Water Solubility of Refined Pyridine
Reducing Substances in Refined Pyridine
Theoretical Maxium Specific Gravity and Density of
Bituminous Paving Mixtures
Solubility of Asphalt Materials in Trichloroethylene
Silver Tarnishing by Paper
Tensile Strength of Adhesives by Means of Bar and rod
Specimens
Cone Penetration of Lubricating Grease
Book Bulk and Book Bulking Number of Paper
Static Coefficient of Friction of Polish Coated Floor
Surfaces as Measured by the Jam Machine
Powdering of Floor Polish Films
Zippers
Durability of Finish of Zippers to Laundering
Colorfastness of Zippers to Drycleaning
Colorfastness of Zippers to Light
Colorfastness of Zipper Tapes to Crocking
Colorfastness of Zippers to Laundering
Durability of Finish of Zippers to Drycleaning
Resistance of Zippers to Salt Spray (Fog)
Strength Tests for Zippers
Operability of Zippers
Measurement of Torque Retention for Packages with
Continuous Thread Closures
Print Resistance of Architectural Paints
Determination of Edge Performance of Composite
Wood Products Under Surfactant Accelerated Moisture
Stress
D 2066
D 2067
D 2068
D 2070
D 2087
D 2069
D 207
D 2071
D 2072
D 2073
D 2074
D 2075
D 2076
D 2077
D 2081
C 1467/C 1467M
D 2086
D 209
D 2078
D 2079
D 2080
D 2082
D 2083
D 2084
D 2085
D 2090
D 2091
D 2092
D 2093
Relative Tinting Strength of Printing Ink Dispersions
Coarse Particles in Printing Ink Dispersions
Filter Plugging Tendency of Distillate Fuel Oils
Standard Test Method for Thermal Stability of
Hydraulic Oils
Standard Test Method for Iron in Formaldehyde
Solutions
Marine Fuels
Dry Bleached Lac
Fatty Nitrogen Products
Water in Fatty Nitrogen Compounds
Total, Primary, Secondary, and Tertiary Amine Values
of Fatty Amines, Amidoamines, and Diamines by
Referee Potentiometric Method
Total, Primary, Secondary, and Tertiary Amine Values
of Fatty Amines by Alternative Indicator Method
Iodine Value of Fatty Amines, Amidoamines, and
Diamines
Acid Value and Amine Value of Fatty Quaternary
Ammonium Chlorides
Ash in Fatty Quanternary Ammonium Chlorides
pH Fatty Quanternary Ammonium Chloride
C 1467/C 1467M - 00
Acidity in Vinyl Acetate and Acetaldehyde
Lampblack Pigment
Iodine Value of Fatty Quanternary Ammonium
Chlorides
Nonvolatile Matter (Solids) in Fatty Quaternary
Ammonium Chlorides
Average Molecular Weight of Fatty Quanternary
Ammoniium Chloride
Percent of Non-Amines in Fatty Nitrogen Compounds
Calculation of Percent of Primary, Secondary, and
Tertiary Amines in Fatty Amines
Rubber Property--Vulcanization Using Oscillating Disk
Cure Meter
Determining Chloride Used In Calculating
Pentachlorophenol in Solutions or Wood (Lime Ignition
Method)
Clarity and Cleanness of Paint and Ink Liquids
Print Resistance of Lacquers
Preparation of Zinc-Coated (Galvanized) Steel Surfaces
for Painting
Preparation of Surfaces of Plastics Prior to Adhesive
Bonding
D 2094
D 2096
D 2097
D 2102
D 2121
D 2122
D 2136
D 2098
D 210
D 2103
D 2104
D 2099
D 2100
D 2105
D 2106
D 2108
D 2109
D 211
D 2110
D 2111
D 2112
D 2113
D 2115
D 2116
D 2118
D 2119
D 2124
D 2126
Standard Practice for Preparation of Bar and Rod
Specimens for Adhesion Tests
ColorFastness and Transfer of Color in the Washing of
Leather
Flex Testing of Finish on Upholstery Leather
Shrinkage of Textile Fibers Bundle Test
Test Methods Polymer Content of Styrene Monomer
and AMS (à-Methylstyrene)
Determining Dimensions of Thermoplastic Pipe and
Fittings
Coated Fabrics--Low-Temperature Bend Test
Dynamic Water Resistance of Shoe Upper Leather by
the Dow Corning Leather Test
Bone Blalck Pigment
Polyethylene Film and Sheeting
Polyethylene (PE) Plastic Pipe, Schedule 40
Dynamic Water Resistance of Shoe Upper Leather by
the Maeser Water Penetration Tester
Electrical Insulating Purposes
Longitudinal Tensile Properties of "Fiberglass" (GlassFiber-Reinforced Thermosetting-Resin) Pipe and Tube
Determination of Amine Acid Acceptance (Alkalinity)
of Halogenated Organic Solvents
Color of Halogenated Organic Solvents and Their
Admixtures (Platinum-Cobalt Scale)
Standard Test Methods for Nonvolatile Matter in
Halogenated Organic Solvents and Their Admixtures
Chrome Yellow and Orange Pigments
Standard Test Method for pH of Water Extractions of
Halogenated Organic Solvents and Their Admixtures
Test Methods for Specific Gravity of Halogenated
Organic Solvents and Their Admixtures
Standard Test Method for Oxidation Stability of
Inhibited Mineral Insulating Oil by Pressure Vessel
Diamond Core Drilling for Site Investigation
Oven Heat Stability of Poly(Vinyl Chloride)
Compositions
FEP-Fluorocarbon Molding and Extrusion Materials
Assigning a Standard Commercial Moisture Content for
Wool and it's Products
Aldehydes in Styrene Monomer
Analysis of Components in Poly(Vinyl Chloride)
Compounds Using an Infrared Spectrophotometric
Technique
Response of Rigid Cellular Plastics to Thermal and
D 2130
D 2131
D 2132
D 2134
D 2137
D 2129
D 2140
D 2143
D 2156
D 2162
D 2164
D 2144
D 2148
D 2149
D 215
D 2151
D 2152
D 2157
D 2158
D 2161
D 2163
D 2165
D 2166
D 2167
Humid Aging
Standard Test Method for Diameter of Wool and Other
Animal Fibers by Microprojection
Natural Muscovite Mica Splittings
Dust-and-Fog Tracking and Erosion Resistance of
Electrical Insulating Materials
Test Method for Determining the Hardness of Organic
Coatings with a Sward-Type Hardness Rocker
Test Methods for Rubber Property - Brittleness Point of
Flexible Polymers and Coated Fabrics
Color of Chlorinated Aromatic Hydrocarbons (Askarels)
Carbon-Type Composition of Insulating Oils of
Petroleum Origin
Standard Test Method for Cyclic Pressure Strength of
Reinforced, Thermosetting Plastic Pipe
Smoke Density in Flue Gases from Burning Distillate
Fuels
Basic Calibration of Master Viscometers and Viscosity
Oil Standards
Standard Methods of Testing Structural Insulating Roof
Deck
Examination of Electrical Insulating Oils by Infrared
Absorption
Bondable Silicone Rubber Tapes Used for Electrical
Insulation
Permittivity (Dielectric Constant) And Dissipation
Factor Of Solid Dielectrics At Frequencies To 10 MHz
And Temperatures To 500°C
Chemical Analysis of White Linseed Oil Paints
Standard Practice for Staining of Poly(Vinyl Chloride)
Compositions by Rubber Compounding Ingredients
Degree of Fusion of Extruded Poly(Vinyl Chloride)
(PVC) Pipe and Molded Fittings by Acetone Immersion
Effect of Air Supply on Smoke Density in Flue Gases
from Burning Distillate Fuels
Residues in Liquefield Petroleum (LP) Gases
Practice for Conversion of Kinematic Viscosity to
Saybolt Universal Viscosity or to Saybolt Furol
Viscosity
Analysis of Liquefield Petroleum (LP) Gases and
Propene Concentrates by Gas Chromatography
Test Method for pH of Aqueous Extracts of Wool and
Similar Animal Fibers
Standard Test Method for Unconfined Compressive
Strength of Cohesive Soil
Density and Unit Weight of Soil In Place by the Rubber
D 2168
D 2170
D 2171
D 2177
D 2172
D 2178
D 2186
D 2190
D 2179
D 2180
D 2187
D 2191
D 2194
D 2196
D 2197
D 2198
D 2199
D 2200
D 2201
D 2205
D 2208
D 2211
D 2202
D 2203
D 2207
D 2209
D 2212
D 2213
D 2216
D 2217
D 2210
D 2214
Balloon Method
Calibration of Laboratory Mechnical-Rammer Soil
Compactors
Kinematic Viscosity of Asphalts (Bitumens)
Viscosity of Asphalts by Vacuum Capillary Viscometer
Ink Absorption of Blotting Paper
Quantitative Extraction of Bitumen from Bituminous
Paving Mixtures
Asphalt Glass Felt Used in Roofing and Waterproofing
Test Methods for Deposit-Forming Impurities in Steam
Standard Specification for Vinyl Acetate
Combination Bar Soap
Active Oxygen in Bleaching Compounds
Test Methods for Physical and Chemical Properties of
Particulate Ion-Exchange Resins
Acetaldehyde Content of Vinyl Acetate
Concentration of Formaldehyde Solutions
Rheological Properties of Non-Newtonian Materials by
Rotational (Brookfield type) Viscometer
Adhesion of Organic Coatings by Scrape Adhesion
Stain Removal From Multicolor Lacquers
Test Method for Measurement of Plasticizer Migration
From Vinyl Fabrics to Lacquers
Painting Steel Surfaces
Practice for Preparation of Zinc-Coated and Zinc-AlloyCoated Steel Panels for Testing Paint and Related
Coating Products
Selection of Tests for Traffic Paints
Test Method for Breaking Strength of Leather by the
Grab Method
Test Method for Elongation of Leather
Slump of Sealants
Staining from Sealants
Bursting Strength of Leather by the Ball Method
Tensile Strength of Leather
Test Method for Slit Tear Resistance of Leather
Compressibility of Leather
Laboratory Determination of Water (Moisture) Content
of Soil and Rock by Mass
Wet Preparation of Soil Samples for Particle-Size
Analysis and Determination of Soil Constants
Grain Crack and Extension of Leather by the Mullen
Test
Estimating the Thermal Conductivity of Leather with the
Cenco-Fitch Apparatus
D 2226
D 2229
D 2234
D 2240
D 2218
D 2219
D 2220
D 2221
D 2222
D 2225
D 2227
D 2228
D 2230
D 2252
D 2256
D 2306
D 2318
D 2233
D 2235
D 2238
D 224
D 2243
D 2247
D 2239
D 2241
D 2244
D 2245
Various Types of Petroleum Oils for Rubber
Compounding Use
Test Method for Adhesion Between Steel Tire Cords
and Rubber
Standard Practice for Collection of a Gross Sample of
Coal
Rubber Property -- Durometer Hardness
Molybdate Orange Pigments
Poly(Vinyl Chloride) Insulation for Wire and Cable,
60°C Operation
Poly(Vinyl Chloride) Insulation for Wire and Cable,
75°C Operation
Creep Properties of Packages Cushioning Materials
Methanol Extract of Vinyl Chloride Resins
Electrical Insulation
Natural Rubber (NR) Technical Grades
Standard Test Method for Rubber Property - Abrasion
Resistance (Pico Abrader)
Rubber Property-Extrudability of Unvulcanized
Compounds
Fineness of Types of Alpaca
Tensile Properties of Yarns by the Single-Strand
Method
Test Method for C8 Aromatic Hydrocarbon Analysis by
Gas Chromatography
Quinoline-Insoluble (QI) Content of Tar and Pitch
Chlorinated Aromatic Hydrocarbons (Askarels) for
Capacitors
Standard Specification for Solvent Cement for
Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and
Fittings
Absorbance of Polyethylene Due to Methyl Groups at
1378 cm -1
Smooth-Surfaced Asphalt Roll Roofing (Organic Felt)
Freeze-Thaw Resistance of Water-Borne Coatings
Practice for Testing Water Resistance of Coatings in 100
% Relative Humidity
Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on
Controlled Inside Diameter
Poly (Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR
Series)
Calculation of Color Differences from Instrumentally
Measured Color Coordinates
Identification of Oils and Oil Acids in SolventReducible Paints
D 2248
D 2249
D 225
D 2251
D 2255
D 2257
D 2258
D 2259
D 226
D 2260
D 2261
D 228
D 2305
D 2265
D 2266
D 2268
D 2270
D 2271
D 2272
D 2273
D 2269
D 227
D 2274
D 2275
D 2276
Standard Practice for Detergent Resistance of Organic
Finishes
Predicting the Effect of Weathering on Face Glazing and
Bedding Compounds on Metal Sash
Specification for Asphalt Shingles (Organic Felt)
Surfaced With Mineral Granules
Standard Test Method for Metal Corrosion by
Halogenated Organic Solvents and Their Admixtures
Grading Spun Yarns for Appearance
Extractable Matter in Textiles
Sampling Yarn for Testing
Shrinkage of Yarns
Asphalt-Saturated Organic Felt Used in Roofing and
Waterproofing
Tables of Conversion Factors and Equivalent Yarn
Numbers Measured in Various Numbering Systems
Tearing Strength of Fabrics by the Tongue (single Rip)
Procedure (Constant-Rate-of-Extension Tensile Testing
Machine)
Standard Test Methods for Asphalt Roll Roofing, Cap
Sheets, and Shingles
Test Methods for Polymeric Films Used for Electrical
Insulation
Standard Test Method for Dropping Point of Lubricating
Grease Over Wide Temperature Range
Wear Preventive Characteristics of Lubricating Grease
(Four-Ball Method)
Analysis of High-Purity n-Heptane and Isooctane by
Capillary Gas Chromatography
Calculating Viscosity Index from Kinematic Viscosity at
40 and 100°C
Test Method for Preliminary Examination of Hydraulic
Fluids (Wear Test)
Oxidation Stability of Steam Turbine Oils by Rotating
Pressure Vessel
Trace Sediment in Lubricating Oils
Evaluation of White Mineral Oils by Ultraviolet
Absorption
Coal-Tar-Saturated Organic Felt Used in Roofing and
Waterproofing
Test Method for Oxidation Stability of Distillate Fuel
Oil (Accelerated Method)
Standard Test Method for Voltage Endurance of Solid
Electrical Insulating Materials Subjected to Partial
Discharges (Corona) on the Surface
Test Method for Particulate Contaminant in Aviation
D 2320
D 2485
D 2486
D 2278
D 2281
D 2282
D 2283
D 2284
D 2285
D 2287
D 2288
D 229
D 2612
D 3489
D 2290
D 2291
D 2296
D 2300
C 1471
D 2290
D 2293
D 2294
D 2295
D 2301
Fuel by Line Sampling
Density (Relative Density) of Solid Pitch (Pycnometer
Metod)
Test Methods for Evaluating Coatings For High
Temperature Service
Test Methods for Scrub Resistance of Wall Paints
Field Evaluation of Wood Preservatives in Round PostSize Specimens
Evaluation of Wetting Agents by the Skein Test
Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe
(SDR-PR)
Chlorinated Aromatic Hydrocarbons (Askarels) for
Transformers
Acidity of Sulfur Hexafluoride
Interfacial Tension of Electrical Insulating Oils of
Petroleum Origin Against Water by the Drop-Weight
Method
Nonrigid Vinyl Chloride Polymer and Copolymer
Molding and Extrusion Compounds
Weight Loss of Plasticizers on Heating
Rigid Sheet and Plate Materials Used for Electrical
Insulation
Test Method for Fiber Cohesion in Sliver and Top
(Static Tests)
Standard Test Methods for Rubber - Microcellular
Urethane
Apparent Tensile Strength of Ring or Tubular Plastics
and Reinforced Plastics by Split Disk Method
Fabrication of Ring Test Specimens for Glass-Resin
Composites
Standard Specification for Continuity of Quality of
Electrical Insulating Polybutene Oil for Capacitors
Standard Test Method for Gassing of Electrical
Insulating Liquids Under Electrical Stress and Ionization
(Modified Pirelli Method)
C 1471 - 00
Apparent Tensile Strength of Ring or Tubular Plastics
and Reinforced Plastics by Split Disk Method
Creep Properties of Adhesives in Shear by Compression
Loading (Metal-to-Metal)
Creep Properties of Adhesives in Shear by Tension
Loading (Metal-to-Metal)
Strength Properties of Adhesives in Shear by tension
Loading at Elevated Temperatures (Metal-to-Metal)
Vinyl Chloride Plastic Pressure-Sensitive Electrical
Insulating Tape
D 2303
D 2304
D 2307
D 2308
D 2310
D 2319
D 2321
D 2322
D 2323
D 2336
D 2337
D 2346
D 2325
D 233
D 2330
D 2331
D 2332
D 2338
D 2339
D 234
D 2340
D 2343
D 2354
D 2377
D 2475
D 2482
D 2344
D 2347
D 2348
Liquid-Contaminant, Inclined-Plane Tracking and
Erosion of Insulating Materials
Thermal Endurance of Rigid Electrical Insulating
Materials
Thermal Endurance of Film--Insulated Round Magnet
Wire
Polyethylene Jacket for Electrical Insulated Wire and
Cable
Machine-Made Reinforced Thermosetting-Resin Pipe
Softening Point of Pitch (Cube-in-Air Method)
Practice for Underground Installation of Thermoplastic
Pipe for Sewers and Other Gravity-Flow Applications
Resistance of Shoe Upper Leather to Artificial
Perspiration
Refined Pyridine (1 Degree)
Guide for Specifying Factory Applied Wood Coatings
Standard Test Method for Freeze-Thaw Stability of
Multicolor Lacquers
Apparent Density of Leather
Standard Test Method for Capillary-Moisture
Relationships for Coarse- and Medium- Textured Soils
by Porous-Plate Apparatus
Sampling and Testing Turpentine
Methylene Blue Active Substances
Practices for Preparation and Preliminary Testing of
Water-Formed Deposits
Practice Analysis of Water-Formed Deposits by
Wavelength-Dispersive X-Ray Fluorescence
Determining Particle Size of Multicolor Lacquers
Strength Properties of Adhesives in Two-Ply Wood
Construction in Shear by Tension Loading
Raw Linseed Oil
Peroxides in Styrene Monomer
Tensile Properties of Glass Fiber Strands, Yarns, and
Rovings Used in Reinforced Plastics
Minimum Film Formation Temperature (MFFT) of
Emulsion Vehicles
Test Method for Tack-Free Time of Caulking
Compounds and Sealants
Standard Specification for Felt
Surface Strength of Paper (Wax Pick Method)
apparent Interlaminar Shear Strength of Parallel Fiber
Composites by Short-Beam Method
Measuring Area of Leather Test Specimens
Arsenic in Paint
D 2349
D 235
D 2350
D 2351
D 2352
D 2356
D 2363
D 2369
D 2376
D 2359
D 2360
D 2361
D 2364
D 2357
D 2358
D 237
D 2370
D 2371
D 2372
C 1472
D 2373
D 2374
D 2375
D 2378
D 2379
D 2380
D 2381
D 2383
D 2384
Qualitative Determination of Nature of Solvent
Composition in Solvent-Reducible Paints
Specification for Mineral Spirits (Petroleum Spirits)
(Hydrocarbon Dry Cleaning Solvent)
Antimony Oxide in White Pigment Separated from
Solvent-Reducible Paints
Sulfide in White Pigment Separated from SolventReducible Paints
Sulfur Dioxide in White Pigment Separated from
Solvent-Reducible Paints
Phosphate and Silica Containing Scouring Powder
Compounds
Standard Test Methods for Hydroxypropyl
Methylcellulose
Standard Test Method for Volatile Content of Coatings
Test Method for Slump of Face Glazing and Bedding
Compounds on Metal Sash
Refined Benzene-535
Test Method for Trace Impurities in Monocyclic
Aromatic Hydrocarbons by Gas Chromatography
Chlorine in Coal
Hydroxyethylcellulose
Qualitative Classification of Surfactants by Infrared
Absorption
Separation of Active Ingredient from Surfactant and
Syndet Compositions
Orange Shellac and Other Lacs
Tensile Properties of Organic Coatings
Pigment Content of Solvent-Reducible Paints
Separation of Vehicle from Solvent-Reducible Paints
C 1472 - 00
Determination of Cobalt in Paint Driers by EDTA
Method
Lead in Paint Driers by EDTA Method
Manganese in Paint Driers by EDTA Method
Formaldehyde 50% Grade Uninhibited and 37% Grade
Inhibited and Uninhibited
Acidity of Formaldehyde Solutions
Methanol Content of Formaldehyde Solutions
Flexible Composite Materials Used for Electrical
Insulation
Testing Plasticizer Compatibility in Poly(Vinyl
Chloride) (PVC) Compounds Under Humid Conditions
Standard Test Methods for Traces of Volatile Chlorides
in Butane-Butene Mixtures
D 2392
D 2414
D 2416
D 2386
D 2395
D 2397
D 6654
D 2389
D 2394
D 2396
D 2399
D 240
D 2400
D 2402
D 2403
D 2412
D 2413
D 2415
D 2419
D 242
D 2420
D 2421
D 2422
D 2423
D 2425
D 2433
D 2451
Standard Test Method for Color Of Dyed Aviation
Gasolines
Standard Test Method for Carbon Black - Oil
Absorption Number
Test Method for Coking Value of Tar and Pitch
(Modified Conradson)
Freezing Point of Aviation Fuels
Standard Test Methods for Specific Gravity of Wood
and Wood-Based Materials
Cationic Emulsified Asphalt
Standard Test Method for Basic Storage Stability of a
Mechanical Pump Dispenser
Minimum Pressure for Vapor Phase Ignition of
Monopropellents
Simulated Service Testing of Wood and Wood-Base
Finish Flooring
Powder-Mix Time of Poly(Vinyl Chloride) (PVC)
Resins Using a Torque Rheometer
Practice for Selection of Cutback Asphalts
Standard Test Method for Heat of Combustion of Liquid
Hydrocarbon Fuels by Bomb Calorimeter
Varnished Glass-Polyester Cloth Used for Electrical
Insulation
Standard Test Method for Water Retention of Textile
Fibers (Centrifuge Procedure)
Refined Phthalic Anhydride-1308
Determination of External Loading Characteristics of
Plastic Pipe by Parallel-Plate Loading
Preparation of Insulating Paper and Board Impregnated
with a Liquid Dielectric
Ash in Coal Tar and Pitch
Sand Equivalent Value of Soils and Fine Aggregate
Standard Specification for Mineral Filler For
Bituminous Paving Mixtures
Standard Test Method for Hydrogen Sulfide In
Liquefied Petroleum (LP) Gases (Lead Acetate Method)
Interconversion of Analysis of C5 and Lighter
Hydrocarbons to Gas-Volume, Liquid-Volume, or
Weight Basis
Industrial Fluid Lubricants by Viscosity System
Surface Wax on Waxed Paper or Paperboard
Hydrocarbon Types in Middle Distillates by Mass
Spectrometry
Rubber Thread
Degree of Set for Glazing Compounds on Metal Sash
D 243
D 2434
D 2435
D 2439
D 2426
D 2427
D 244
D 2440
D 2441
D 2442
D 2443
D 2444
D 2447
D 2448
D 2449
D 245
D 2450
D 2452
D 2460
D 2472
D 2453
D 2454
D 2456
D 2457
D 2462
D 2455
D 246
D 2463
D 2464
Residue of Specified Penetration
Standard Test Method for Permeability of Granular
Soils (Constant Head)
One-Dimensional Consolidation Properties of Soils
Refined Phenol
Butadine Dimer and Styrene in Butadiene Concentrates
by Gas Chromatography
Determination of C2 Through C5 Hydrocarbons in
Gasolines by Gas Chromatography
Emulsified Asphalts
Oxidation Stability of Mineral Insulating Oil
Hydrolyzable Chlorine Compounds in Chlorinated
Aromatic Hydrocarbons (Askarels) by Refluxing
Alumina Ceramics for Electrical and Electronic
Applications
Lacing Twines and Tapes Used as Harnesses in
Electrical Equipment Specification for Polyester Film
Pressure-Sensitive Electrical Insulating Tape
Impact Resistance of Thermoplastic Pipe and Fittings by
Means of a Tup (Falling Weight)
Polyethylene (PE) Plastic Pipe, Schedules 40 and 80,
based on Outside Diameter
Water-Soluble Salts in Pigments by Measuring the
Specific Resistance of the Leachate of the Pigment
Rubber Bales From Natural Sources--Limit on Coating
Standard Practice for Establishing Structural Grades and
Related Allowable Properties for Visually Graded
Lumber
Bond of Oil- and Resin-Base Caulking Compounds
Extrudability of Oil- and Resin-Base Caulking
Compounds
Alpha-Particle-Emitting Isotopes of Radium in Water
Specification for Sulfur Hexafluoride
Shrinkage and Tenacity of Oil- and Resin-Base
Caulking Compounds
Determining the Effect of Overbaking on Organic
Coatings
Indentification of Polyhydric Alcohols in Alkyd Resins
Specular Gloss of Plastic Films and Solid Plastics
Moisture in Wool by Distillation with Toluene
Indentification of Corboxylic Acids in Alkyd Resins
Distillation of Creosote and Creosote-Coal Tar Solutions
Drop Impact Resistance of Blow-Molded Thermoplastic
Containers
Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe
C 1475
D 2466
D 2467
D 2468
D 2471
D 2474
D 2477
D 2481
D 2484
D 2487
D 2488
D 2489
D 2500
D 2510
D 2511
D 249
D 2492
D 2493
D 2495
D 2497
D 2494
D 25
D 2501
D 2502
D 2503
D 2513
Fittings, Schedule 80
C 1475 - 00
Poly(Vinyl Chloride) (PVC) Plstic Pipe Fittings,
Schedule 80
Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,
Schedule 80
Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe
Fittings, Schedule 40
Test Method for Gel Time and Peak Exothermic
Temperature of Reacting Thermosetting Resins
Vinyl Chloride Copolymer Resins
Dielectric Breakdown Voltage and Dielectric Strength
of Insulating Gases at Commercial Power Frequencies
Accelerated Evaluation of Wood Preservatives for
Marine Services by Means of Small-Size Specimens
Specification for Polyester Film Pressure-Sensitive
Electrical Insulating Tape
Practice for Classification of Soils for Engineering
Purposes (Unified Soil Classification System)
Practice for Description and Identification of Soils
(Visual-Manual Procedure)
Degree of Particle Coating of Bituminous-Aggregate
Mixtures
Test Method for Cloud Point of Petroleum Products
Adhesion of Solid Film Lubricants
Thermal Shock Sensitivity of Solid Film Lubricants
Asphalt Roll Roofing (Organic Felt) Surfaced with
Mineral Granules
Forms of Sulfur in Coal
Asphalts
Moisture in Cotton by Cotton by Oven-Drying
Standard Tolerances for Manufactured Organic-Base
Filament Single Yarns
Commercial Mass of a Shipment of Yarn on Man-Made
Staple Fiber or Tow
Round Timber Piles
Test Method for Calculation of Viscosity-Gravity
Constant (VGC) of Petroleum Oils
Estimation of Molecular Weight (Relative Molecular
Mass) of Petroleum Oils From Viscosity Measurements
Relative Molecular Mass (Molecular Weight) of
Hydrocarbons by Thermoelectric Measurement of Vapor
Pressure
Specification for Thermoplastic Gas Pressure Pipe,
Tubing, and Fittings
D 2594
D 2504
D 2505
D 2507
D 2508
D 2509
D 2512
D 2517
D 2518
D 2519
D 2525
D 2533
D 2534
D 2520
D 2521
D 2523
D 2527
D 2522
D 2524
D 2526
D 2532
D 2538
D 2555
D 257
D 2575
D 2593
D 2539
D 2540
D 2541
Test Method for Stretch Properties of Knitted Fabrics
Having Low Power
Noncondensable Gases in C2 and Lighter Hydrocarbon
Products by Gas Chromatography
Ethylene, Other Hydrocarbons, and Carbon Dioxide in
High-Purity Ethylene by Gas Chromatography
Rheological Properties of Gelled Rocket Propellants
Solid Rocket Propellant Specific Impulse Measurements
Measurement of Load-Carrying Capacity of Lubricating
Grease (Timken Method)
Compatibility of Materials with Liquid Oxygen (Impact
Sensitivity Threshold Pass-Fail Techniques)
Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
Woven Glass Fabrics for Electrical Insulation
Bond Strength of Electrical Insulating Varnishes by the
Helical Coil Test
Standard Practice for Sampling Wool for Moisture
Vapor-Liquid Ratio of Spark-Ignition Engine Fuels
Coefficient of Kinetic Friction of Wax Coatings
Complex Permittivity (Dielectric Constant) of Solid
Electrical Insulating Materials at Microwave
Frequencies and Temperatures to 1650°C
Asphalt Used in Canal, Ditch, and Pond Lining
Standard Practice for Testing Load-Strain Properties of
Roofing Membranes
Rubber Seals--Splice Strength
Chlorine Content of Polybutenes Used for Electrical
Insulation
Breaking Tenacity of Wool Fibers, Flat Bundle Method-1/8-in. (3.2 mm) Gage Length
Ozone-Resisting Silicone Rubber Insulation for Wire
and Cable
Viscosity and Viscosity Change After Standing at Low
Temperature of Aircraft Turbine Lubricants
Fusion of Poly(Vinyl Chloride) (PVC) Resins Using a
Torque Rheometer
Establishing Clear Wood Strength Values
DC Resistance or Conductance of Insulating Materials
Testing Polymerized Fatty Acids
Butadiene Purity and Hydrocarbon Impurities by Gas
Chromatography
Shock Sensitivity of Liquid Monopropellants by the
Card-Gap Test
Drop-Weight Sensitivity of Liquid Monopropellants
Critical Diameter and Detonation Velocity of Liquid
D 2549
D 255
D 2556
D 2557
D 2559
D 256
D 2561
D 2603
D 2609
D 2565
D 2569
D 2570
D 2562
D 2563
D 2564
D 2571
D 2572
D 2573
D 2574
D 2578
D 2579
D 2580
D 2581
D 2582
D 2583
Monopropellants
Separation of Representative Aromatics and
Nonromatics Fractions of High-Boiling Oils by Elution
Chromatography
Steam Distillation of Bituminous Protective Coatings
Apparent Viscosity of Adhesives Having Shear-RateDependent Flow Properties
Tensile-Shear Strength of Adhesives in the Subzero
Temperature Range from -267.8 to -55°C (-450 to 67°F)
Specification for Adhesives for Structural Laminated
Wood Products for Use Under Exterior (Wet Use)
Exposure Conditions
Standard Test Methods for Determining the Izod
Pendulum Impact Resistance of Plastics
Environmental Stress-Crack Resistance of Blow-Molded
Polyethylene Containers
Sonic Shear Stability of Polymer-Containing Oils
Specification for Plastic Insert Fittings for Polyethylene
(PE) Plastic Pipe
Operating Xenon Arc-Type Light-Exposure Apparatus
With and Without Water for Exposure of Plastics
Distillation of Pitch
Simulated Service Corrosion Testing of Engine Coolants
Classifying Visual Defects in Parts Molded from
Reinforced Thermosetting Plastics
Classifying Visual Defects in Glass-Reinforced Plastic
Laminate Parts
Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic
Piping Systems
Testing Wood Furniture Lacquers
Isocyanate Groups in Urethane Materials or
Prepolymers
Field Vane Shear Test In Cohesive Soil
Standard Test Method for Resistance of Emulsion Paints
in the Container to Attack by Microorganisms
Wetting Tension of Polyethylene and Polypropylene
Films
Total and Organic Carbon in Water
Phenols in Water by Gas-Liquid Chromatography
Polybutylene (PB) Plastics Molding and Extrusion
Materials
Test Method for Puncture-Propagation Tear Resistance
of Plastic Film and Thin Sheeting
Test Method for Indentation Hardness of Rigid Plastics
D 2584
D 2589
D 2590
D 2595
D 2596
D 2597
D 260
D 261
D 2598
D 2604
D 2606
D 2613
D 2624
D 263
D 2635
D 2636
D 2616
D 2617
D 2619
D 262
D 2620
D 2621
D 2622
D 2625
D 2626
D 2627
D 2694
D 2766
D 2628
by Means of a Barcoal Impressor
Ignition Loss of Cured Reinforced Resins
McNett Wet Classification of Asbesstos Fiber
Sampling Chrysotile Asbestos
Evaporation loss of Lubricating Greases Over WideTemperature Range
Measurement of Extreme-Pressure Properties of
Lubricating Grease (Four-Ball Method)
Analysis of Demethanized Hydrocarbon Liquid
Mixtures Containing Nitrogen and Carbon Dioxide by
Gas Chromatography
Boiled Linseed Oil
Iron Blue Pigment
Calculation of Certain Physical Properties of Liquefied
Petroleum (LP) Gases from Compositional Analysis
High-Boiling Hydrocarbon Solvent for Preparing OilBorne Preservative Solutions
Solubility of Pentachlorophenol in Heavy Hydrocarbon
Solvents
Standard Test Method for Calcium or Zinc in Paint
Driers by EDTA Method
Electrical Conductivity of Aviation and Distillate Fuels
Chrome Oxide Green Pigment
Standard Specification for Methyl Isobutyl Carbinol
Standard Specification for Hexylene Glycol
Evaluation of Visual Color Difference With a Gray
Scale
Total Ash in Leather
Hydrolytic Stability of Hydraulic Fluids (Beverage
Bottle Method)
Ultramarine Blue Pigment
Light Stability of Clear Coatings
Standard Test Method for Infrared Identification of
Vehicle Solids From Solvent-Reducible Paints
Sulfur in Petroleum Products by Wavelength Dispersive
X-Ray Fluorescence Spectrometry
Endurance (Wear) Life and Load-Carrying Capacity of
Solid Film Lubricants (Falex Pin and Vee Method)
Asphalt-Saturated and Coated Organic-Felt Base Sheet
Used in Roofing
Diacetone Alcohol
Standard Specification for Diethylene Glycol
Standard Test Method for Specific Heat of Liquids and
Solids
Preformed Polychloroprene Elastomeric Joint Seals for
D 2632
D 2634
D 2639
D 2633
D 2638
D 2643
D 2644
D 2645
D 2646
D 2647
D 2649
D 2650
D 2651
D 2652
D 2655
D 2656
D 2657
D 2658
D 2659
D 2661
D 2662
D 2663
D 2671
D 269
D 2693
D 2665
D 2666
D 2667
D 2664
Concrete Pavements
Rubber Property--Resilience by Vertical Rebound
Methyl Amyl Acetate (95% Grade)
Plastic Properties of Coal by the Constant-Torque
Gieseler Plastometer
Thermoplastic Insulations and Jackets for Wire and
Cable
Real Density of Calcined Petroleum Coke by Helium
Pycnometer
Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch
Liner (Exposed Type)
Yarns Spun on the Woolen System
Standard Tolerances for Yarns Spun on the Cotton or
Worsted Systems
Backing Fabrics
Standard Specification for Crosslinkable Ethylene
Plastics
Test Method for Corrosion Characteristics of Solid Film
Lubricants
Chemical Composition of Gases by Mass Spectrometry
Preparation of Metal Surfaces for Adhesive Bonding
Activated Carbon
Standard Specification for Crosslinked Polyethylene
Insulation for Wire and Cable Rated 0 to 2000 V
Standard Specification for Crosslinked Polyethylene
Insulation for Wire and Cable Rated 2001 to 35000 V
Heat Fusion Joining of Polyolefin Pipe and Fittings
Determining Interior Dimensions of Fiberboard Boxes
(Box Gage Method)
Column Crush Properties of Blown Thermoplastic
Containers
Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40
Plastic Drain, Waste, and Vent Pipe
Polybutylene (PB) Plastic Pipe (SIDR-PR) Based on
Controlled Inside Diameter
Test Methods for Carbon Black - Dispersion in Rubber
Heat-Shrinkable Tubing for Electrical Use
Insoluble Matter in Rosin and Rosin Derivatives
Ethylene Glycol
Standard Specification for Poly(Vinyl Chloride) (PVC)
Plastic Drain, Waste, and Vent Pipe and Fittings
Polybutylene (PB) Plastic Tubing
Biodegradability of Alkylbenzene Sulfonates
Triaxial Compresive Strength of Undrained Rock Core
Specimens Without Pore Pressure Measurement
D 2668
D 2669
D 267
D 2670
D 2672
D 2673
D 3065
D 3192
D 3195
D 2674
D 268
D 2680
D 2683
D 2684
D 2685
D 2686
D 2687
D 2688
C 1478
D 2689
D 2690
D 2699
D 2692
D 2697
D 2698
2,6-Ditertiary-Butyl Para Cresol and 2,6-DitertiaryButyl Phenol in Electrical Insulating Oil by Infrared
Absorption
Apparent Viscosity of Petroleum Waxes Compounded
with Additives (Hot Melts)
Gold Bronze Power
Test Method for Measuring Wear Properties of Fluid
Lubricants (Falex Pin and Vee Block Method)
Joints for IPS PVC Pipe Using Solvent Cement
Oriented Polypropylene Film
Standard Test Methods for Flammability of Aerosol
Products
Test Methods for Carbon Black Evaluation in NR
(Natural Rubber)
Rotameter Calibration
Analysis of Sulfochromate Etch Solution Used in
Surface Preparation of Aluminum
Sampling and Testing Volatile Solvents and Chemical
Intermediates for Use in Paint and Related Coatings and
Material
Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl
Chloride) (PVC) Composite Sewer Piping
Socket-Type Polyethylene Fittings for Outside
Diameter-Controlled Polyethylene Pipe and Tubing
Permeability of Thermoplastic Containers to Packaged
Reagents or Proprietary Products
Air and Carbon Tetrafluoride in Sulfur Hexafluoride by
Gas Chromatography
Specification for Polytetrafluoroethylene-Backed
Pressure-Sensitive Electrical Insulating Tape
Standard Practices for Sampling Particulate IonExchange Materials
Test Methods for Corrosivity of Water in the Absence of
Heat Transfer (Weight Loss Methods)
C 1478 - 00
Testing Alkyd Resins
Isophthalic Acid in Alkyd and Polyester Resins
Knock Characteristics of Motor Fuels by the Research
Method
Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire
Cord, and Yarns
Volume Nonvolatile Matter in Clear or Pigmented
Coatings
Determination of the Pigment Content of SolventReducible Paints by High-Speed Centrifuging
D 2700
D 2702
D 2703
D 2709
D 2717
D 2728
D 2710
D 2711
D 2712
D 2713
D 2714
D 2715
D 2718
D 2719
D 2720
D 2724
D 2729
D 2734
D 2737
D 6650
D 2726
D 2732
D 2739
D 2741
D 2743
D 2745
Standard Test Method for Motor Octane Number of
Spark-Ignition Engine Fuel
Rubber Chemicals--Determination of Infrared
Absorption Characteristics
Rubber Chemicals--Determination of Ultraviolet
Absorption Characteristics
Water and Sediment in Middle Distillate Fuels by
Centrifuge
Standard Test Method for Thermal Conductivity of
Liquids
Paving Uses and Application Temperatures for Road
Tars
Bromine Index of Petroleum Hydrocarbons by
Electrometric Titration
Demulsibility Characteristics of Lubricating Oils
Hydrocarbon Traces in Propylene Concentrates by Gas
Chromatography
Standard Test Method for Dryness of Propane (Valve
Freeze Method)
Calibration and Operation of the Falex Block-on-Ring
Friction and Wear Testing Machine
Volatilization Rates of Lubricants in Vacuum
Structural Panels in Planar Shear (Rolling Shear)
Structural Panels in Shear Through-the-Thickness
Practice for Calculation of Commercial Weight and
Yield of Scoured Wool, Top, and Noil for Various
Commercial Compositions
Bonded, Fused, and Laminated Apparel Fabrics
Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
Void Content of Reinforced Plastics
Polyethylene (PE) Plastic Tubing
Standard Test Method for Determining the Dynamic
Wiping Efficiency, Wet Particle Removal Ability, and
Fabric Particle Contribution of Nonwoven Fabrics Used
in Cleanrooms
Bulk Specific Gravity and Density of Non-Absorptive
Compacted Bituminous Mixtures
Unrestrained Linear Thermal Shrinkage of Plastic Film
and Sheeting
Volume Resistivity of Conductive Adhesives
Susceptibility of Polyethylene Bottles to Soot
Accumulation
Uniformity of Traffic Paint Vehicle Solids by
Spectroscopy and Gas Chromatography
Standard Test Method for Relative Tinting Strength of
D 2746
D 2756
D 276
D 2749
D 2750
D 2751
D 2752
D 2754
D 2755
D 2757
D 2758
D 2759
D 2760
D 2764
D 2773
D 2774
D 2777
D 2761
D 2765
D 2768
D 2770
D 2771
D 2772
D 2792
D 2810
D 2813
D 2827
D 2779
White Pigments by Reflectance Measurements
Staining Tendency of Asphalt (Stain Index)
Weight Loss of Electrical Insulating Varnishes
Standard Test Methods for Identification of Fibers in
Textiles
Dimensions of Plastic Pipe Fittings
Acrylonitrile-Butadiene-Styrene (ABS) Plastics Utilities
Conduit and Fittings
Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and
Fittings
Air Permeability of Asbestos Fibers
High-Temperature Glass Cloth Pressure-Sensitive
Electrical Insulating Tape
Sampling and Reduction to Test Weight of Electrical
Grade Magnesium Oxide
Specification for Impervious Steatite Ceramics for
Electrical and Electronic Applications
Engine Coolants by Engine Dynamometer
Standard Practice for Sampling Gas from a Transformer
Under Positive Pressure
Analysis of Sodium Triphosphate by the Simplified
Paper Chromatographic Method
Dimethylformamide-Insoluble (DMF-I) Content of Tar
and Pitch
Loss on Ignition of Electrical Grade Magnesium Oxide
Standard Practice for Underground Installation of
Thermoplastic Pressure Piping
Determination of Precision and Bias of Applicable Test
Methods of Committee D-19 on Water
Analysis of Sodium Triphosphate by the Simplified Ion
Exchange Method
Determination of Gel Content and Swell Ratio of
Crosslinked Ethylene Plastics
General-Purpose Ethylene-Propylene Rubber Jacket for
Wire and Cable
Ozone-Resisting Ethylene-Propylene Rubber Insulation
and Jacket for Wire and Cable
Compaction Density of Electrical Grade Magnesium
Oxide
Sieve Analysis of Electrical Grade Magnesium Oxide
Solvent and Fuel Resistance of Traffic Paint
Standard Test Method for pH of Leather
Sampling Leather for Physical and Chemical Tests
Specification for Styrene Monomer
Estimation of Solubility of Gases in Petroleum Liquids
D 2780
D 2782
D 2783
D 2784
D 2786
D 2789
D 279
D 2791
D 2793
D 2867
D 2917
D 2946
D 2794
D 2795
D 2797
D 2798
D 2799
D 280
D 2800
D 2802
D 2803
D 2804
D 6552
D 2805
D 2807
D 2809
Solubility of Fixed Gases in Liquids
Measurement of Extreme-Pressure Properties of
Lubricating Fluids (Timken Method)
Measurement of Extreme-Pressure Properties of
Lubricating Fluids (Four-Ball Method)
Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen
Burner or Lamp)
Hydrocarbon Types Analysis of Gas-Oil Saturate
Fractions by High Ionizing Voltage Mass Spectrometry
Standard Test Method for Hydrocarbon Types in Low
Olefinic Gasoline by Mass Spectrometry
Bleeding of Pigments
Standard Test Methods for Continuous Determination of
Sodium in Water
Block Resistance of Organic Coating on Wood
Substrates
Moisture in Activated Carbon
Methyl Isoamyl Ketone
Standard Terminology for Asbestos and AsbestosCement Products
Standard Test Method for Resistance of Organic
Coatings to the Effects of Rapid Deformation (Impact)
Analysis of Coal and Coke Ash
Practice for Preparing Coal Samples for Microscopical
Analysis by Reflected Light
Microscopical Determination of the Reflectance of
Vitrinite in a Polished Specimen of Coal
Microscopical Determination of Volume Percent of
Physical Components of Coal
Hygroscopic Moisture (and Other Matter Volatile Under
the Test Conditions) in Pigment
Preparation of Methyl Esters from Oils for
Determination of Fatty Acid Composition by GasLiquid Chromatography
Ozone-Resistant Ethylene-Propylene Rubber Insulation
for Wire and Cable
Testing Filiform Corrosion Resistance of Organic
Coatings on Metal
Purity of Methyl Ethyl Ketone by Gas Chromatography
D 6552 - 00
Hiding Power of Paints by Reflectometry
Chromic Oxide in Leather (Perchloric Acid Oxidation)
Test Method for Cavitation Corrosion and ErosionCorrosion Characteristics of Aluminum Pumps With
Engine Coolants
D 281
D 2812
D 2816
D 2817
D 2821
D 2822
D 2823
D 2825
D 2828
D 2829
D 2835
D 2824
D 283
D 2830
D 2832
D 2834
D 2847
D 2862
D 2864
D 2837
D 2838
D 2839
D 284
D 2841
D 2842
D 2843
Oil Absorption of Pigments by Spatula Rub-Out
Non-Lint Content of Cotton
Standard Test Method for Cashmere Coarse-Hair
Content in Cashmere
Standard Specification for Maximum Cashmere CoarseHair Content in Cashmere
Measuring the Relative Stiffness of Leather by Means of
a Torsional Wire Apparatus
Asphalt Roof Cement
Asphalt Roof Coatings
Definitions of Terms Relating to Polishes and Related
Materials
Specification for Nonbituminous Inserts for Contraction
Joints in Portland Cement Concrete Airfield Pavements,
Sawable Type
Sampling and Analysis of Built-Up Roofs
Lubricant for Installation of Preformed Compression
Seals in Concrete Pavements
Aluminum-Pigmented Asphalt Roof Coatings, NonFibered, Asbestos Fibered, and Fibered without
Asbestos
Chemical Analysis of Cuprous Oxide and Copper
Pigments
Exterior Durability of Factory-Primed Field Finished
Wood Products
Determining Volatile and Nonvolatile Content of Paint
and Related Coatings
Nonvolatile Matter (Total Solids) in Water-Emulsion
Floor Polishes, Solvent-Based Floor Polishes and
Polymer-Emulsion Floor Polishes
Testing Engine Coolants in Car and Light Truck Service
Particle Size Distribution of Granular Activated Carbon
Standard Terminology Relating to Electrical Insulating
Liquids and Gases
Obtaining Hydrostatic Design Basis for Thermoplastic
Pipe Materials
Shrink Tension and Orientation Release Stress of Plastic
Film and Thin Sheeting
Use of a Melt Index Strand for Determining Density of
Polyethylene
Tests Methods for Chemical Analysis of Mercuric
Oxide Pigment
Sampling Hollow Microspheres
Water Absorption of Rigid Cellular Plastics
Test Method for Density of Smoke from the Burning or
D 2844
D 2845
D 2846/D 2846M
D 2850
D 2851
D 2852
D 2854
D 2856
D 2855
D 2857
D 2858
D 2859
D 2860/D 2860M
B 908
D 2861
D 2863
D 2865
D 2866
D 2868
D 287
D 2872
D 2873
D 2875
D 2876
D 2880
Decomposition of Plastics
Resistance R-Value and Expansion Pressure of
Compacted Soils
Standard Test Method for Laboratory Determination of
Pulse Velocities and Ultrasonic Elastic Constants of
Rock
Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hotand Cold-Water Distribution Systems
Standard Test Method for Unconsolidated-Undrained
Triaxial Compression Test on Cohesive Soils
Liquid Optical Adhesive
Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
Standard Test Method for Apparent Density of
Activated Carbon
Open Cell Content of Rigid Cellular Plastics by the Air
Pycnometer
Making Solvent-Cemented Joints with Poly(Vinyl
Chloride) (PVC) Pipe and Fittings
Dilute Solution Viscosity of Polymers
Thermal Conductivity of Electrical Grade Magnesium
Oxide
Flammability of Finished Textile Floor Covering
Materials
Adhesion of Pressure-Sensitive Tape to Fiberboard at
90° Angle and Constant Stress
B 908 - 00
Flexible Composites of Copper Foil with Dielectric Film
or Treated Fabrics
Measuring the Minimum Oxygen Concentration to
Support Candle-Like Combustion of Plastics (Oxygen
Index)
Standard Practice for Calibration of Standards and
Equipment for Electrical Insulating Materials Testing
Total Ash Content of Activated Carbon
Nitrogen Content (Kjeldahl) and Hide Substance
Content of Leather
API Gravity of Crude Petroleum and Petroleum
Products (Hydrometer Method)
Effect of Heat and Air on a Moving Film of Asphalt
(Rolling Thin-Film Oven Test)
Interior Porosity of Poly(Vinyl Chloride) (PVC) Resins
by Mercury Intrusion Porosimetry
Insoluble Ash of Vegetable-Tanned Leather
Water-Soluble Matter of Vegetable-Tanned Leather
Standard Specification for Gas Turbine Fuel Oils
D 2916
D 2878
D 2879
D 2882
D 2883
D 2884
D 2887
D 2889
D 2890
D 2892
D 2893
D 2895
D 2896
D 2898
D 2899
D 29
D 290
D 2900
D 2901
D 2902
D 2903
D 2904
D 2905
D 2906
D 2907
D 2908
Standard Specification for Isophorone
Standard Test Method for Estimating Apparent Vapor
Pressures and Molecular Weights of Lubricating Oils
Vapor Pressure-Temperature Relationship and Initial
Decomposition Temperature of Liquids by Isoteniscope
Test Method for Indicating Wear Characteristics of
Petroleum and Non-Petroleum Hydraulic Fluids in
Constant Volume Vane Pump
Standard Test Method for Reaction Threshold
Temperature of Liquid and Solid Materials
Yield Stress of Heterogeneous Propellants by Cone
Penetration Method
Standard Test Method for Boiling Range Distribution of
Petroleum Fractions by Gas Chromatography
Test Method for Calculation of True Vapor Pressures of
Petroleum Distillate Fuels
Calculation of Liquid Heat Capacity of Petroleum
Distillate Fuels
Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column)
Oxidation Characteristics of Extreme-Pressure
Lubrication Oils
Gloss Retention of Waxed Paper and Paperboard After
Storage at 40°C (104°F)
Base Number of Petroleum Products by Potentiometric
Perchloric Acid Titration
Accelerated Weathering of Fire-Retardant-Treated
Wood for Fire Testing
Establishing Design Stresses for Round Timber Piles
Sampling and Testing Lac Resins
Bituminous Plant Inspection
Accelerated Life Test of Electrical GRade Magnesium
Oxide as Used in Sheathed-Type Electric Heating
Elements
Cement Content of Freshly Mixed Soil-Cement
Specification for Fluoropolymer Resin Heat-Shrinkable
Tubing for Electrical Insulation
Crosslinked Chlorinated Polyolefin Heat-Shrinkable
Tubing for Electrical Insulation
Interlaboratory Testing of a Textile Test Method that
Produces Normally Distributed Data
Statements on Number of Specimens for Textiles
Statements on Precision and Bias for Textiles
Microquantites of Uranium in Water by Fluoromatry
Standard Practice for Measuring Volatile Organic
D 291
D 2911
D 2913
D 2914
D 2915
D 2918
D 2919
D 2921
D 2939
D 2944
D 2922
D 2923
D 2924
D 2925
D 2929
D 293
D 2930
D 2935
D 2936
D 2937
D 2938
D 2940
D 2941
D 2942
D 2943
Matter in Water by Aqueous-Injection Gas
Chromatography
Cubic Foot Weight of Crushed Bituminous Coal
Dimensions and Tolerances for Plastic Bottles
Standard Test Method for Mercaptan Content of the
Atmosphere
Standard Test Methods for Sulfur Dioxide Content of
the Atmosphere (West-Gaeke Method)
Standard Practice for Evaluating Allowable Properties
for Grades of Structural Lumber
Durability Assessment of Adhesive Joints Stressed in
Peel
Standard Test Method for Determining Durability of
Adhesive Joints Stressed in Shear by Tension Loading
Qualitative Tests for the Presence of Water Repellents
and Preservatives in Wood Products
Emulsified Bitumens Used as Protective Coatings
Test Method of Sampling Processed Peat Materials
Density of Soil and Soil-Aggregate In Place by Nuclear
Methods (Shallow Depth)
Rigidity of Polyolefin Film and Sheeting
External Pressure Resistance of Reinforced
Thermosetting-Resin Pipe
Standard Test Method for Beam Deflection of
"Fiberglass" (Glass-Fiber-Reinforced Thermosetting
Resin) Pipe Under Full Bore Flow
Sulfur Content of Cellulosic Materials by X-Ray
Fluorescence
Sieve Analysis of Coke
Maleic Acid in Maleic Anhydride by Potentiometric
Titration
Test Method for Apparent Density of Industrial
Aromatic Hydrocarbons
Direct Tensile Strength of Intact Rock Core Specimens
Standard Test Method for Density of Soil in Place by the
Drive-Cylinder Method
Unconfined Compressive Strength of Intact Rock Core
Specimens
Graded Aggregate Material for Bases or Subbases for
Highways or Airports
Measuring Break Pattern of Leather (Break Scale)
Standard Test Method for Total Acid Acceptance of
Halogenated Organic Solvents (Nonreflux Methods)
Standard Test Method for Aluminum Scratch of 1, 1, 1Trichloroethane to Determine Stability
D 2945
D 2947
D 2949
D 295
D 2950
D 2969
D 297
D 2951
D 2952
D 2955
D 2957
D 2958
D 2959
D 2960
D 2961
D 2962
D 2973
D 2978
D 3056
D 2967
D 2968
D 2972
D 2974
D 2976
D 2979
D 2982
D 2987
D 2977
D 2980
Gas Content of Insulating Oils
Screen Analysis of Abestos Fibers
Standard Specification for 3.25-in. Outside Diameter
Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and
Vent Pipe and Fittings
Varnished Cotton Fabrics Used for Electrical Insulation
Density of Bituminous Concrete in Place by Nuclear
Method
Test Methods for Steel Tire Cords
Rubber Products--Chemical Analysis
Resistance of Types III and IV Polyethylene Plastics to
Thermal Stress-Racking
Ethylene Plastics
Hand Scrubbing Soap (Grit Soap) Paste and Bar
Hand Scrubbing Soap (Grit Soap) Powder
Powdered Toilet Soap
Ethylene Oxide Content of Polyethoxylated Nonionic
Surfactants
Controlled Laundering Test Using Naturally Soiled
Fabrics and Household Appliances
Standard Test Method for Single-Stage Total Moisture
Less than 15 % in Coal Reduced to 2.36-mm (No. 8
Sieve) Topsize
Calculating Volume-Temperature Correction for CoalTar Pitches
Test Method for Total Nitrogen in Peat Materials
Test Method for Volume of Processed Peat Materials
Standard Test Method for Gel Time of Solventless
Varnishes
Edge Coverage of Coating Powders
Standard Test Method for Med and Kemp Fibers in
Wool and Other Animal Fibers by Microprojection
Arsenic in Water
Standard Test Methods for Moisture, Ash, and Organic
Matter of Peat and Other Organic Soils
pH of Peat Materials
Standard Test Method for Pressure-Sensitive Tack of
Adhesives Using an Inverted Probe Machine
Standard Test Methods for Detecting Glycol-Base
Antifreeze in Used Lubricating Oils
Moisture Content of Asbestos Fiber
Particle Size Range of Peat Materials for Horticultural
purposes
Volume Weights, Water-Holding Capacity, and Air
Capacity of Water-Saturated Peat Materials
D 2981
D 2995
D 2998
D 3013
D 2983
D 2985
D 2986
D 2988
D 2989
D 299
D 2990
D 2992
D 2993
F 2031
D 2994
D 2996
D 2997
D 3002
D 3004
D 3009
D 301
D 3000
D 3003
D 3005
D 3006
D 3012
Wear Life of Solid Film Lubricants in Oscillating
Motion
Determining Application Rate of Bituminous
Distributors
Polyhydric Alcohols in Alkyd Resins
Specification for Epoxy Molding Compounds
Low-Temperature Viscosity of Automotive Fluid
Lubricants Measured by Brookfield Viscometer
Color of Asbestos
Evaluation of Air Assay Meadia by the Monodisperse
DOP (Dioctyl Phthalate) Smoke Test
Standard Test Methods for Water-Soluble Halide Ion in
Halogenated Organic Solvents and Their Admixtures
Acidity-Alkalinity of Halogenated Organic Solvents and
Their Admixtures
Asbestos Yarns
Tensil, Compressive, and Flexural Creep and Creep
Rupture of Plastics
Obtaining Hydrostatic or Pressure Design Basis for
"Fiberglass" (Glass-Fiber-Reinforced ThermosettingResin) Pipe and Fittings
Acrylonitrile-Butadiene Rubberized Tar
F 2031 - 00
Rubberized Tar
Standard Specification for Filament-Wound "Fiberglass"
(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe
Evaluation of Coatings for Plastics
Extruded Crosslinked and Themoplastic SemiConducting Conductor and Insulation Shielding
Materials
Composition of Turpentine by Gas Chromatography
Soluble Cellulose Nitrate
Polybutylene (PB) Plastic Pipe (SDR-PR) Based on
Outside Diameter
Pressure Mottling and Blocking Resistance of Organic
Coatings on Metal Substrates
Low-Temperature Resistant Vinyl Chloride Plastic
Pressure-Sensitive Electrical Insulating Tape
Polyethylene Plastic Pressure-Sensitive Electrical
Insulating Tape
Standard Test Method for Thermal-Oxidative Stability
of Polypropylene Using a Specimen Rotator Within an
Oven
D 3014
D 3015
D 3016
D 3017
D 3018
D 3019
D 304
D 3043
D 3053
D 3054
D 3021
D 3022
D 3023
D 3025
D 3028
D 3030
D 3032
D 3034
D 3026
D 3035
D 3038
D 3039/D 3039M
D 3042
D 3044
D 3045
D 3046
D 3047
D 3048
D 3049
Flame Height, Time of Burning, and Loss of Mass of
Rigid Thermoset Cellular Plastics in a Vertical Position
Microscopical Examination of Pigment Dispersion in
Plastic Compounds
Use of Liquid Exclusion Chromatography Terms and
Relationships
Water Content of Soil and Rock in Place by Nuclear
Methods (Shallow Depth)
Standard Specification for Class A Asphalt Shingles
Surfaced with Mineral Granules
Lap Cement Used with Asphalt Roll Roofing NonFibered, Asbestos Fibered, and Non-Asbestos Fibered
Specification for n-Butyl Alcohol (Butanol)
Test Methods for Structural Panels in Flexure
Terminology Relating to Carbon Black
Analysis of Cyclohexane by Gas Chromatography
Phthalocyanine Green Pigments
Color and Strength of Color Pigments by Use of a
Miniature Sandmill
Determination of Resistance of Factory-Applied
Coatings on Wood Products to Stains and Reagents
Standard Practice for Standardizing Cotton Fiber Test
Results by Use of Calibration Cotton Standards
Kinetc Coefficient of Friction of Plastic Solids
Standard Test Method for Volatile Matter (Including
Water) of Vinyl Chloride Resins
Hookup Wire Insulation
Specification for Type PSM Poly(Vinyl Chloride)
(PVC) Sewer Pipe and Fittings
Sinter Index of Electrical Grade Magnesium Oxide for
Use in Sheathed-Type Electrical Heating Elements
Polyethylene (PE) Plastic Pipe (SDR-PR) Bsed on
Controlled Outside Diameter
Drop Shatter Test for Coke
Test Method for Tensile Properties of Polymer Matrix
Composite Materials
Insoluble Residue in Carbonate Aggregates
Standard Test Method for Shear Modulus of WoodBased Structural Panels
Heat Aging of Plastics Without Load
Powdered Hand Cleaner (Soap with Borax)
Powdered Hand Cleaner (Soap with Vegetable
Scrubber)
Alkaline Protease
Synthetic Anionic Ingredient by Cationic Titration
D 305
D 3050
D 3052
D 3057
D 3060
D 3061
D 3063
D 3064
D 3069
D 3070
D 3094
D 3103
D 3117
D 312
D 3071
D 3074
D 3075
D 3076
D 3078
D 3079
D 3080
D 3082
D 3084
D 3159
D 3161
D 3190
D 3087
D 3089
D 3090
D 3091
D 3092
D 3097
Solvent- Extractable Material in Black Pigments
Measuring Soil Removal From Artificially Soiled
Fabrics (Not Suitable for Detergent Ranking)
Rating Water-Emulsion Floor Polishes
Moisture in Aerosol Products
Pressure Drop Rate of Compressed Gas-Propelled
Products
Tin-Plate Fabricated Aerosol Cans
Pressure in Glass Aerosol Bottles
Aerosol Products
Delivery Rate of Aerosol Productss
Standard Test Method of Rapid Pressure Determination
of Pressurized Products
Standard Test Method for Seepage Rate of Aerosol
Products
Test Method for Insulation Quality of Packages
Wax Appearance Point of Distillate Fuels
Specification for Asphalt Used in Roofing
Drop Testing of Glass Aerosol Bottles
Pressure in Metal Aerosol Containers
Overrun of Food Aerosol Products
Standard Test Methods for Effective Crimping on
Outside Crimped Valves of Aerosol Containers
Determination of Leaks in Flexible Packaging by
Bubble Emission
Water Vapor Transmission of Flexible Heat-Seated
Packages for Dry Products
Direct Shear Test of Soils Under Consolidated Drained
Conditions
Boron In Water
Alpha-Particle Spectrometry of Water
Modified ETFE-Fluoropolymer Molding and Extrusion
Materials
Wind-Resistance of Asphalt Shingles (Fan-Induced
Method)
Test Method for Rubber - Evaluation of Chloroprene
Rubber (CR)
Test Method for Operating Performance of AnionExchange Materials for Strong Acid Removal
Measurement of A-D Dimension of Aerosol Valve Dip
Tubes
Storage Testing of Aerosol Products
Safe Filling of Low-Pressure Pressurized Products
Particle-Size Distribution of Space-Insecticide Aerosol
Delivered Mass
D 3106
D 6548
D 3108
D 3104
D 3105
D 3111
D 3113
D 3115
D 3120
D 3121
D 3122
D 3123
D 3124
D 3130
D 3142
D 3147
D 3155
D 3125
D 3128
D 3131
D 3132
D 3133
D 3134
D 3135
D 3136
D 3137
D 3140
D 3138
Permanent Deformation of Elastomeric Yarns
D 6548 - 00
Coefficient of Friction, Yarn to Solid Material
Softening Point of Pitches (Mettler Softening Point
Method)
Testing Elastomeric and Plastomeric Roofing and
Waterproofing Materials
Flexibility Determination of Hot-Melt Adhesives by
Mandrel Bend Test Method
Sodium Salts of EDTA in Water
Standard Test Method for Explosive Reactivity of
Lubricants with Aerospace Alloys Under High Shear
Trace Quantities of Sulfur in Light Liquid Petroleum
Hydrocarbons by Oxidative Microcoulometry
Test Method for Tack of Pressure-Sensitive Adhesives
by Rolling Ball
Solvent Cements for Styrene-Rubber (SR) Plastic Pipe
and Fittings
Spiral Flow of Low-Pressure Thermosetting Molding
Compounds
Vinylidene Unsaturation in Polyethylene by Infrared
Spectrophotometry
Specification for n-Propyl Acetate (96 % Grade)
Test Method for Density of Liquid Asphalts
(Hydrometer Method)
Test Method for Testing Stop-Leak Additives for
Engine Coolants
Lime Content of Uncured Soil-Lime Mixtures
Standard Test Method for Monomethyl Ether of
Hydroquinone in Colorless Monomeric Acrylate Esters
and Acrylic Acid
2-Methoxyethanol
Isopropyl Acetate (99% Grade)
Solubility Range of Resins and Polymers
Standard Test Method for Quantitative Determination of
Cellulose Nitrate in Alkyd Modified Lacquers by
Infrared Spectrophotometry
Establishing Color and Gloss Tolerances
Specification for Performance of Bonded, Fused, and
Laminated Apparel Fabrics
Terminology Relating to Care Labeling for Apparel,
Textile, Home Furnishing, and Leather Products
Rubber Property--Hydrolytic Stability
Flaring Polyolefin Pipe and Tubing
Solvent Cements for Transition joints Between
D 3139
D 3141
D 3143
D 3144
D 3145
D 3148
D 3149
D 315
D 3150
D 3151
D 3152
D 3153
D 3154
D 3156
D 3157
D 3160
D 3162
D 3163
D 3171
D 3183
D 3164M
D 6648
Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl
Chloride) (PVC) Non-Pressure Piping Components
Joints for Plastic Pressure Pipes Using Flexible
Elastomeric Seals
Asphalt for Ubdersealing Oortland-Cement Concrete
Pavements
Flash Point of Cutback Asphalt with Tag Open-Cup
Apparatus
Specification for Crosslinked Poly(Vinylidene Fluoride)
Heat-Shrinkable Tubing for Electrical Insulation
Thermal Endurance of Electrical Insulating Varnishes
by the Helical Coil Method
Elastic Moduli of Intact Rock Core Specimens in
Uniaxial Compression
Specification for Crosslinked Polyolefin HeatShrinkable Tubing for Electrical Insulation
Woven Asbestos Tape
Specification for Crosslinked and Noncrosslinked
Poly(Vinyl Chloride) Heat-Shrinkable Tubing for
Electrical Insulation
Thermal Failure of Solid Electrical Insulating Materials
Under Electric Stress
Standard Test Method for Capillary-Moisture
Relationships for Fine-Textured Soils by PressureMembrane Apparatus
Recoatability of Water-Emulsion Floor Polishes
Standard Test Method for Average Velocity in a Duct
(Pitot Tube Method)
Rubber--Chromatographic Analysis of Antidegradants
(Stabilizers, Antioxidants, and Antiozonants)
Rubber from Natural Sources--Color
Phenol Content of Isopropylbenzene (Cumene)
Standard Test Method for Carbon Monoxide in the
Atmosphere (Continuous Measurement by
Nondispersive Infrared Spectrometry)
Standard Test Method for Determining Strength of
Adhesively Bonded Rigid Plastic Lap-Shear Joints in
Shear by Tension Loading
Test Methods for Constituent Content of Composite
Materials
Rubber-Preparation of Pieces for Test Purposes from
Products
Strength Properties of Adhesively Bonded Plastic LapShear Sandwich Joints in Shear by Tension Loading
Standard Test Method for Determining the Flexural
Creep Stiffness of Asphalt Binder Using the Bending
D 3164
D 3165
D 3166
D 3167
D 3168
D 3169
D 3170
D 3172
D 3173
D 3174
D 3175
D 3176
D 3177
D 3178
D 3179
D 3180
D 3181
D 3182
D 3184
D 3187
D 3188
D 319
D 3185
D 3186
D 3189
D 3191
D 3193
Beam Rheometer (BBR)
Strength Properties of Adhesively Bonded Plastic LapShear Sandwich Joints in Shear by Tension Loading
Test Method for Strength Properties of Adhesives in
Shear by Tension Loading of Single-Lap-Joint
Laminated Assemblies
Fatigue Properties of Adhesives in Shear by Tension
Loading (Metal/Metal)
Floating Roller Peel Resistance of Adhesives
Qualitative Identification of Polymers in Emulsion
Paints
Refined Sunflower Oil
Chipping Resistance of Coatings
Practice for Proximate Analysis of Coal and Coak
Standard Test Method for Moisture in the Analysis
Sample of Coal and Coke
Ash in the Analysis Sample of Coal and Coke from Coal
Standard Test Method for Volatile Matter in the
Analysis Sample of Coal and Coke
Ultimate Analysis of Coal and Coke
Total Sulfur in the Analysis Sample of Coal and Coke
Carbon and Hydronen in the Analysis Sample of Coal
and Coke
Nitrogen in the Analysis Sample of Coal and Coke
Calculating Coal and Coke Analysis from AsDetermined to Different Bases
Conducting Wear Tests on Textiles
Rubber--Materials, Equipment, and Procedures for
Mixing Standard Compounds and Preparing Standard
Vulcanized Sheet
Rubber--Evaluation of NR (Natural Rubber)
Test Methods for Rubber - Evaluation of NBR
(Acrylonitrile-Butadiene Rubber)
Test Methods for Rubber - Evaluation of IIR (IsobuteneIsoprene Rubber)
Specification for Amyl Alcohol (Synthetic)
Rubber--Evaluation of SBR (Styrene-Butadiene Rubber)
Including Mixtures With Oil
Rubber--Evaluation of SBR (Syrene-Butadiene Rubber)
Mixed With Carbon Black or Carbon Black and Oil
Rubber--Evaluation of Solution BR (Polybutadiene
Rubber)
Test Methods for Carbon Black in SBR (StyreneButadiene Rubber) - Recipe and Evaluation Procedures
Ethylbenzene
D 3194
D 3198
D 3199
D 3200
D 322
D 323
D 3230
D 3201
D 3202
D 3203
D 3204
D 3205
D 3206
D 3207
D 3208
D 3209
D 3210
D 3234
D 3237
D 3240
D 3212
D 3213
D 3214
D 3215
D 3217
Rubber from Natural Sources--Plasticity Retention
Index (PRI)
Application and Removal Torque of Threaded of LugStyle Closures
Water Vapor Transmission Through Screw-Cap Closure
Liners
Standard Specification and Test Method for Establishing
Recommended Design Stresses for Round Timber
Construction Poles
Gasoline Diluent in Used Gasoline Engine Oils by
Distillation
Vapor Pressure of Petroleum Products (Reid Method)
Test Method for Salts in Crude Oil (Electrometric
Method)
Hygroscopic Properties of Fire-Retardant Wood and
Wood-Base Products
Practice for Preparation of Bituminous Mixture Beam
Specimens by Means of the California Kneading
Compactor
Percent Air Voids in Compacted Dense and Open
Bituminous Paving Mixtures
Preformed Cellular Plastic Joint Fillers for Relieving
Pressure
Viscosity of Asphalt wtih Cone and Plate Viscometer
Soil Resistance of Floor Polishes
Detergent Resistance of Floor Polish Films
Manifold Papers for Permanent Records
Freeze/Thaw Resistance of Polymer Emulsion Floor
Polishes
Comparing Colors of Films from Water-Emulsion Floor
Polishes
Abrasion Resistance of Petroleum Wax Coatings
Lead in Gasoline by Atomic Absorption Spectroscopy
Undissolved Water in Aviation Turbine Fuels
Joints for Drain and Sewer Plastic Pipes Using Flexible
Elastomeric Seals
Practice for Handling, Storing, and Preparing Soft
Undisturbed Marine Soil
Coating Powders and Their Coatings Used for Electrical
Insulation
Measurement of the Specific Electrical Impedance of
Electrical-Grade Magnesium Oxide for Use in SheathedType Electric Heating Elements
Standard Test Methods for Breaking Tenacity of
Manufactured Textile Fibers in Loop or Knot
Configurations
D 3218
D 3222
D 3223
D 3224
D 3332
D 3467
D 3225
D 3227
D 3228
D 3231
D 3233
D 3235
D 3236
D 3238
D 3241
D 3258
D 3265
D 3276
D 3239
D 3283
D 3242
D 3244
D 3245
D 3246
D 3249
D 3251
D 3256
D 3257
Polyolefin Monofilaments
Unmodified Poly(Vinylidene Fluoride) (PVDF)
Molding, Extrusion and Coating Materials
Total Mercury in Water
Water Solubility of Auxiliary Solvent for WoodPreserving Solutions
Mechanical Shock Fragility of Products, Using Shock
Machines
Carbon Tetrachoride Activity of Activated Carbon
Low-Boiling Hydrocarbon Solvent for Oil-Borne
Preservatives
Standard Test Method for Thiol (Mercaptan) Sulfur in
Gasoline, Kerosine, Aviation Turbine, and Distillate
Fuels (Potentiometric Method)
Total Nitrogen in Lubricating Oils and Fuel Oils by
Modified Kjeldahl Method
Phosphorus in Gasoline
Measurement of Extreme Pressure Properties of Fluid
Lubricants (Falex Pin and Vee Block Methods)
Solvent Extractables in Petroleum Waxes
Apparent Viscosity of Hot Melt Adhesives and Coating
Materials
Test Method for Calculation of Carbon Distribution and
Structural Group Analysis of Petroleum Oils by the n-dM Method
Thermal Oxidation Stability of Aviation Turbine Fuels
(JFTOT Procedure)
Test Method for Porosity of Paint Films
Test Method for Carbon Black - Tint Strength
Guide for Painting Inspectors (Metal Substrates)
Aromatic Types Analysis of Gas-Oil Aromatic Fractions
by High Ionizing Voltage Mass Spectrometry
Air as an Electrical Insulating Material
Acidity in Aviation Turbine Fuel
Utilization of Test Data to Determine Conformance with
Specifications
Pumpability of Industrial Fuel Oils
Sulfur in Petroleum Gas by Oxidative Microcoulometry
Standard Practice for General Ambient Air Analyzer
Procedures
Thermal-Aging Characteristics of Electrical Insulating
Varnishes Applied Over Film-Insulated Magnet Wire
Chemical Analysis of Phthalocyanine Blue and Green
Pigments
Aromatics in Mineral Spirits by Gas Chromatography
D 3259
D 329
D 331
D 3310
D 333
D 3330/D 3330M
D 3260
D 3261
D 3262
D 3263
D 3264
D 3266
D 3267
D 3268
D 6651
D 3269
D 3270
E 2098
D 3271
D 3272
D 3273
Standard Practice for Infrared Determination of the
Temperature of Applied Coatings on Wood Products
During the Curing Cycle
Specification for Acetone
Specification for 2-Ethoxyethanol
Test Method for Determining Corrosivity of Adhesive
Materials
Standard Guide for Clear and Pigmented Lacquers
Standard Test Method for Peel Adhesion of PressureSensitive Tape
Standard Test Method for Acid and Mortar Resistance
of Factory-Applied Clear Coatings on Extruded
Aluminum Products
Butt Heat Fusion Polyethylene (PE) Plastic Fittings for
Polyethylene (PE) Plastic Pipe and Tubing
"Fiberglass" (Glass-Fiber-Reinforced ThermosettingResin) Sewer Pipe
Test Methods for Corrosivity of Solvent Systems for
Removing Water-Formed Deposits
Industrial Grade Aniline
Standard Test Method for Automated Separation and
Collection of Particulate and Acidic Gaseous Fluoride in
the Atmosphere (Double Paper Tape Sampler Me
Test Method for Separation and Collection of Particulate
and Water-Soluble Gaseous Fluorides in the
Atmosphere (Filter and Impinger Method)
Test Method for Separation and Collection of Particulate
and Gaseous Fluorides in the Atmosphere (Sodium
Bicarbonate-Coated Glass Tube and Particulate Filter
Method)
Standard Test Method for Determining The Rate of
Sorption and Sorptive Capacity Of Nonwoven Fabrics
Standard Test Methods for Analysis for Fluoride
Content of the Atmosphere and Plant Tissues (Manual
Procedures)
Test Methods for Analysis for Fluoride Content of the
Atmosphere and Plant Tissues (Semiautomated Method)
E 2098 - 00
Standard Practice for Direct Injection of SolventReducible Paints Into a Gas Chromatograph for Solvent
Analysis
Vacuum Distillation of Solvents from SolventReducible Paints for Analysis
Standard Test Method for Resistance to Growth of Mold
on the Surface of Interior Coatings in an Environmental
Chamber
D 3274
D 3275
D 3277
D 3278
D 3279
D 3280
D 3282
D 3284
D 3285
D 3286
D 3288
D 3289
D 3290
D 3291
D 3295
D 3296
D 330
D 3302
D 3294
D 3305
D 3299
D 3300
D 3301
D 3306
D 3307
D 3308
D 3309
D 3311
Evaluating Degree of Surface Disfigurement of Paint
Films by Microbial (Fungal or Algal) Growth or Soil
and Dirt Accumulation
Standard Classification for E-CTFE-Fluoroplastic
Molding, Extrusion, and Coating Materials
Moisture Content of Oil-Impreegnated Cellulosic
Insulation
Flash Point of Liquids by Setaflash Closed-Cup
Apparatus
n-Heptane Insolubles
Analysis of White Zinc Pigments
Classification of Soils and Soil-Aggregate Mixtures for
Highway Construction Purposes
Combustible Gases in the Gas Space of Electrical
Apparatus Using Portable Meters
Water Absorptiveness of Nonbibulous Paper and
Paperboard (Cobb Test)
Gross Calorific Value of Coal and Coke by the
Isoperibol Bomb Calorimeter
Magnet-Wire Enamels
Specific Gravity or Density of Semi-Solid and Solid
Bituminous Materials by Nickel Crucible
Bond and Ledger Papers for Permanent Records
Compatibility of Plasticizers in Poly(Vinyl Chloride)
Plastics Under Compression
PTFE Tubing
FEP-Fluorocarbon Tube
2-Butoxyethanol
Standard Test Method for Total Moisture in Coal
PTFE Resin Molded Basic Shapes
Sampling Small Gas Volume in a Transformer
Specification for Filament-Wound Glass-FiberReinforced Thermoset Resin Corrosion-Resistant Tanks
Standard Test Method for Dielectric Breakdown Voltage
of Insulating Oils of Petroleum Origin Under Impulse
Conditions
File Folders for Storage of Permanent Records
Standard Specification for Glycol Base Engine Coolant
for Automobile and Light-Duty Service
Standard Specification for Perfluoroalkoxy (PFA)Fluorocarbon Resin Molding and Extrusion Materials
PTFE Resin Skived Tape
Polybutylene (PB) Plastic Hot- and Cold-Water
Distribution Systems
Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
D 3312
D 3313
D 3314
D 3316
D 3320
D 3319
D 332
D 3321
D 3322
D 3324
D 3325
D 3328
D 3329
D 3333
D 3343
D 3326
D 3335
D 3350
D 3336
D 3337
D 3338
D 3339
D 3340
D 3341
Standard Test Method for Percent Reactive Monomer in
Solventless Varnishes
Carbon Black--Individual Pellet Crush Strength
Rubber--Chemical Analysis for Polystyrene Blocks in
SBR (Styrene-Butadiene Rubber) and StyreneReinforced Latices
Standard Test Method for Stability of Perchloroethylene
with Copper
Specification for Emulsified Coal-Tar Pitch (Mineral
Colloid Type)
Practice for the Accelerated Polishing of Aggregates
Using the British Wheel
Relative Tinting Strength of White Pigments by Visual
Observation
Use of the Refractometer for Field Test Determination
of the Freezing Point of Aqueous Engine Coolants
Standard Practice for Testing Primers and Primer
Surfacers Over Preformed Metal
Practice for Carbon Black - Improving Test
Reproducibility Using ASTM Reference Blacks
Preservation of Waterborne Oil Samples
Comparison of Brackish Water, Seawater Oils by Gas
Chromatography
Purity of Methyl Isobutyl Keton by Gas
Chromatography
Standard Practice for Sampling Manufactured Staple
Fibers, Sliver, or Tow for Testing
Test Method for Estimation of Hydrogen Content of
Aviation Fuels
Preparation of Samples for Identification of Waterborne
oils
Low Concentrations of Lead, Cadmium, and Cobalt in
Paint by Atomic Absorption Spectroscopy
Standard Specification for Polyethylene Plastics Pipe
and Fittings Materials
Life of Lubricating Greases in Ball Bearings at Elevated
Temperatures
Determining Life and Torque of Lubricating Greases in
Small Bearings
Standard Test Method for Estimation of Net Heat of
Combustion of Aviation Fuels
Standard Test Method for Acid Number of Petroleum
Products by Semi-Micro Color Indicator Titration
Lithium and Sodium in Lubricating Greases in Small
Bearings
Standard Test Method for Lead in Gasoline - Iodine
D 3342
D 3344
D 3345
D 3346
D 3373
D 3374
D 3427
D 3466
D 3347
D 3348
D 3349
D 3351
D 3352
D 3353
D 3359
D 3354
D 3360
D 3362
D 3368
D 3370
D 3361
D 3363
D 3364
D 3366
Monochloride Method
Dispersion Stability of New (Unused) Rolling Oil
Dispersions in Water
Standard Test Method for Total Wax Content of
Corrugated Paperboard
Laboratory Evaluation of wood and Other Cellulosic
Materials for Resistance to Termites
Standard Test Methods for Rubber Property Processability of SBR (Styrene-Butadiene Rubber) With
the Mooney Viscometer
Vanadium in Water
Specification for Vinyl-Coated Glass Yarns
Test Method for Air Release Properties of Petroleum
Oils
Ignition Temperature of Granular Activated Carbon
Flow Rate and Tap Density of Electrical Grade
Magnesium Oxide for Use in Sheathed-Type Electric
Heating Elements
Rapid Field Test for Trace Lead in Unleaded Gasoline
(Colorimetric Method)
Absorption Coefficient of Ethylene Polymer Material
Pigmented with Carbon Black
Gel Count of Plastic Film
Test Method for Strontium Ion in Brackish Water,
Seawater, and Brines
Fibrous-Insulated Magnet Wire
Measuring Adhesion by Tape Test
Blocking Load of Plastic Film by the Parallel Plate
Method
Particle Size Distribution by Hydrometer of the
Common White Extender Pigments
Test Method for Purity of Acrylate Esters by Gas
Chromatography
Specification for FEP-Fluorocarbon Sheet and Film
Practices for Sampling Water from Closed Conduits
Operating, Light- and Water-Exposure Apparatus
(Unfiltered Open-Flame Carbon-Arc Type) for Testing
Paint, Varnish, Lacquer, and Related Products Using the
Dew Cycle
Film Hardness by Pencil Test
Flow Rate for Poly(Vinyl Chloride) and Rheologically
Unstable Thermoplastics
Color of Maleic Anhydride and Phthalic Anhydride in
the Molten State and After Heating (Platinum-Cobalt
Scale)
D 3367
D 3369
D 3371
D 3372
D 3375
D 3377
D 3395
D 3376
D 3379
D 3380
D 3382
D 3386
D 3389
E 2099
D 3381
D 3385
D 3387
D 3393
D 3394
D 3398
D 3399
D 34
D 3400
D 3401
D 3402
D 3403
D 341
D 3412
Plasticizer Sorption of Poly(Vinyl Chloride) Resins
Under Applied Centrifugal Force
Polytetrafluoroethylene (PTFE) Resin Cast Film
Aqueous Solution by Gas-Liquid Chromatography
Molybdenum in Water
Capacity of Particulate Mixed Bed Ion Exchange
Materials
Standard Test Method for Weight Loss of Solventless
Varnishes
Test Methods for Rubber Deterioration - Dynamic
Ozone Cracking in a Chamber
Sampling and Testing Pupls to Used in the Manufacture
of Electrical Insulation
Tensile Strength and Young's Modulus for HighModulus Single-Filament Materials
Relative Permittivity (Dielectric Constant) and
Dissipation Factor of Plasitc-Based Microwave Circuit
Substrates
Standard Test Methods for Measurement of Energy and
Integrated Charge Transfer Due to Partial Discharges
(Corona) Using Bridge Tech
Standard Test Method for Coefficient of Linear Thermal
Expansion of Electrical Insulating Materials
Test Method for Coated Fabrics Abrasion Resistance
(Rotary Platform, Double-Head Abrader)
E 2099 - 00
Viscosity-Graded Asphalt Cement for Use in Pavement
Construction
Infiltration Rate of Soils in Field Using Double-Ring
Infitrometer
Test Method for Compaction and Shear Properties of
Bituminous Mixtures by Means of the U.S. Corps of
Engineers Gyratory Testing Machine [GTM]
Coated Fabrics--Waterproofness
Sampling and Testing Electrical Insulating Board
Index of Aggregate Particle Shape and Texture
General-Purpose Synthetic Detergent Liquid
Chemical Analysis of White Pigments
Liquid Sodium Silicates
Water in Halogenated Organic Solvents and Their
Admixtures
Tumbler Test for Coke
Rubber--Evaluation of IR (Isoprene Rubber)
Charts for Liquid Petroleum Products
Standard Test Method for Coefficient of Friction, Yarn
D 3423
D 3404
D 3405
D 3406
D 3409
D 3414
D 3415
D 3418
D 3410/D 3410M
D 3417
D 3419
D 3420
D 3424
D 3426
D 3429
D 3430
D 3432
D 3433
D 3434
D 3436
D 344
D 3441
D 3447
to Yarn
Application of Emulsified Coal-Tar Pitch (Mineral
Colloid Type)
Measuring Metric Potential in the Vadose Zone Using
Tensiometers
Joint Sealants, Hot-Applied, for Concrete and Asphalt
Pavements
Joint Sealant, Hot-Applied, Elastomeric-Type, for
Portland Cement Concrete Pavements
Adhesion of Asphalt-Roof Cement to Damp, Wet, or
Underwater Surfaces
Comparision of Waterborne Petroleum Oils by Infrared
Spectroscope
Identification of Waterborne Oils
Transition Temperatures of Polymers by Differential
Scanning Calorimetry
Compressive Properties of Polymer Matrix Composite
Materials with Unsupported Gage Section by Shear
Loading
Heats of Fusion and Crystallization of Polymers by
Thermal Analysis
Standard Practice for In-Line Screw-Injection Molding
Test Specimens From Thermosetting Compounds
Dynamic Ball Burst (Pendulum) Impact Resistance of
Plastic Film
Evaluating the Relative Lightfastness and
Weatherability of Printed Matter
Dielectric Breakdown Voltage and Dielectric Strength
of Solid Electrical Insulating Materials Using Impulse
Waves
Solubility of Fixed Gases in Low-Boiling Liquids
Clarity and Yellowness of Liquid Water-Based Clear
Floor Polishes
Unreacted Toluene Diisocyanates in Urathane
Prepolymers and Coating Solutions by Gas
Chromatography
Fracture Strength in Cleavage of Adhesives in Bonded
Joints
Test Method for Multiple-Cycle Accelerated Aging Test
(Automatic Boil Test) for Exterior Wet Use Wood
Adhesives
Sampling and Handling Aniline
Relative Hiding Power of Paints by the Visual
Evaluation of Brushouts
Mechanical Cone Penetration Tests of Soil
Test Method for Purity of Halogenated Organic Solvents
D 3437
D 3438
D 3440
D 3442
D 3443
D 3444
D 3448
D 3451
D 345
D 3450
D 3452
D 3461
D 3453
D 3454
D 3455
D 3456
D 3457
D 3458
D 3459
D 346
D 3460
F 2006
D 3462
D 3464
D 3465
Sampling and Handling Liquid Cyclic Products
Sampling and Handling Naphthalene, Maleic
Anhydride, and Phthalic Anhydride
Preparing Specifications for Water-Emulsion Floor
Polishes
Gaseouse Tritium Content of the Atmosphere
Chloride in Trichlorotrifluoroethane
Total Acid Number of Trichlorotrifluoroethane
Test Method for Specific Aqueous Conductance of
Trichlorotrifluoroethane
Standard Guide for Testing Coating Powders and
Powder Coatings
Roads and Structural Applications
Washability Properties of Interior Architectural Coatings
Rubber--Identification by Pyrolysis-Gas
Chromatography
Softening Point of Asphalt and Pitch (Mettler Cup-andBall Method)
Flexible Cellular Materials--Urethane for Furniture and
Automotive Cushioning, Bedding, and Similar
Applications
Radium-226 in Water
Compatibility of Construction Material with Electrical
Insulating Oil of Petroleum Origin
Determining by Exterior Exposure Tests the
Susceptibility of Paint Films to Microbiological Attack
Preparation of Methyl Esters from Fatty Acids for
Determination of Fatty Acid Composition by GasLiquid Chromatography
Copies from Office Copying Machines for Permanent
Records
Humid-Dry Cycling for Coatings on Wood and Wood
Products
Collection and Preparation of Coke Samples for
Laboratory Analysis
White Watermarked and Unwatermarked Bond, Mimeo,
Spirit Duplicator, Reprographic, and Laser Printer CutSized Office Papers
F 2006 - 00
Specification for Asphalt Shingles Made from Glass Felt
and Surfaced with Mineral Granules
Standard Test Method for Average Velocity in a Duct
Using a Thermal Anemometer
Standard Test Method for Purity of Monomeric
Plasticizers by Gas Chromatography
D 3468
D 3469
D 347
D 3475
D 348
D 3483
D 3482
D 3487
D 3470
D 3472
D 3473
D 3474
D 3477
D 3479/D 3479M
D 3480
D 3481
D 3484
D 3485
D 349
D 3516
D 3531
D 3532
D 3541
D 3492
D 3493
D 3494
Liquid-Applied Neoprene and Chlorosulfonated
Polyethylene Used in Roofing and Waterproofing
Measurement of Vertical Downward Forces to
Disengage Type IIA Lug-Style Child-Resistant Closures
Volume and Specific Gravity Correction for Creosote,
Creosote-Coal Tar Solution and Coal Tar
Standard Classification of Child-Resistant Packages
Test Methods for Rigid Tubes Used for Electrical
Insulation
Test Methods for Accumulated Deposition in a Steam
Generator Tube
Test Method for Determining Electrolytic Corrosion of
Copper by Adhesives
Standard Specification for Mineral Insulating Oil Used
in Electrical Apparatus
Mesurement of Removal Lug Strippage of Type IIA
Child-Resistant Closures
Reverse Ratchet Torque of Type IA Child-Resistant
Closures
Lifting Force Required to Remove Certain ChildResistant Snap Caps
Checking the Calibration of Torque Meters Used in
Packaging Applications
Men's and Boys' Woven Dress Shirt Fabrics
Tension-Tension Fatigue of Polymer Matrix Composite
Materials
Downward Force Required to Open or Activate ChildResistant Snap-Engagement Packages
Shelling Two-Piece Child-Resistant Closures That Are
Activated by Two Simultaneous Dissimilar Motions
Rubber--Evaluation of Oil-Extended Solution BR
(Polybutadiene Rubber)
Smooth-Wall Cailable Polyethylene (PE) Conduit
(Duct) for Preassembled Wire and Cable
Laminated Rounds Used for Electrical Insulation
Standard Test Methods for Ashing Cellulose
Test Method for Resin Flow of Carbon Fiber-Epoxy
Prepreg
Test Method for Gel Time of Carbon Fiber-Epoxy
Prepreg
Standard Specification for 2-Ethylhexyl Acrylate
Rubber Contraceptives (Male Condoms)
Standard Test Method for Carbon Black - Oil
Absorption Number of Compressed Sample
Water-Emulsion Floor Polish Remover
D 3495
D 3497
D 3499
D 350
D 3496
D 3498
D 3546
D 3547
D 363
D 3649
D 3500
D 3501
D 3504
D 3505
D 3507
D 351
D 3511
D 3512
D 3513
D 3514
D 3515
D 365
D 3652/D 3652M
D 3517
D 3518/D 3518M
D 3519
D 352
D 3520
D 3521
D 3522
Hexane Extraction of Leather
Test Method for Dynamic Modulus of Asphalt Mixtures
Toughness of Structural Panels
Flexible Treated Sleeving Used for Electrical Insulation
Preparation of Bituminous Mixture Specimens for
Dynamic Modulus Testing
Adhesives for Feild-Gluing Plywood to Lumber
Framing for Floor Systems
Test Method for Formic Acid in Glacial Acetic Acid
Standard Specification for n-Butyl Acrylate
Specification for Tricresyl Phosphate
High-Resolution Gamma-Ray Spectrometry of Water
Structural Panels in Tension
Standard Test Methods for Wood-Based Structural
Panels in Compression
Maleic Anhydride
Standard Test Method for Density or Relative Density of
Pure Liquid Chemicals
Penetration of Preservatives in Wood and for
Differentiating Between Heartwood and Sapwood
Natural Muscovite Block Mica and Thins Based on
Visual Quality
Test Method for Pilling Resistance and Other Related
Surface Changes of Textile Fabrics: Brush Pilling Tester
Test Method for Pilling Resistance and Other Related
Surface Changes of Textile Fabrics: Random Tumble
Pilling Tester
Overlength Fiber Content of Man-Made Staple Fiber
Test Method for Pilling Resistance and Other Related
Surface Changes of Textile Fabrics: Elastomeric Pad
Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
Standard Guide for Soluble Nitrocellulose Base
Solutions
Thickness of Pressure-Sensitive and Gummed Tapes
"Fiberglass" (Glass-Fiber-Reinforced ThermosettingResin) Pressure Pipe
In-Plane Shear Response of Polymer Matrix Composite
Materials by Tensxile Test of a ±45° Laminate
Foam in Aqueous Media (Blender Test)
Pasted Mica used in Electrical Insulation
Quenching Time of Heat-Treating Fluids (Magnetic
Quenchometer Method)
Surface Wax Coating on Corrugated Board
Applied Coating Wax and Impregnating (Saturating)
Wax in Corrugated Board Facing
D 3523
D 3524
D 3654/D 3654M
D 3657
D 367
D 4719
D 3525
D 3527
D 3528
D 3529/D 3529M
D 3530/D 3530M
D 3533
D 3534
D 3535
D 3539
F 2009
D 3540
D 3542
D 3543
D 3548
D 3550
D 3558
D 3562
D 3577
D 3544
D 3545
D 3549
D 3551
Spontaneous Heating Values of Liquids and Solids
(Differential Mackey Test)
Diesel Fuel Diluent in Used Diesel Engine Oils by Gas
Chromatography
Test Methods for Shear Adhesion of Pressure-Sensitive
Tapes
Zipper Dimensions
Test Method for Xylene-Insoluble Matter in Creosote
Test Method for Prebored Pressuremeter Testing in
Soils
Gasoline Diluent in Used Gasoline Engine Oils by Gas
Chromatography
Life Performance of Automotive Wheel Bearing Grease
Strength Properties of Double Lap Shear Adhesive
Joints by Tension Loading
Resin Solids Content of Epoxy-Matrix Prepreg by
Matrix Dissolution
Volatiles Content of Epoxy Matrix Prepreg
Rubber--Nitrogen Content
Polychorinated Biphenyls (PCBs) in Water
Test Method for Resistance to Deformation Under Static
Loading for Structural Wood Laminating Adhesives
Used Under Exterior (Wet Use) Exposure Conditions
Evaporation Rates of Volatile Liquids by Shell ThinFilm Evaporometer
F 2009 - 00
Primary Amyl Acetate, Synthetic (98% Grade)
Preformed Polychloroprene Elastomeric Joint Seals for
Bridges
Metal Glide Adhesion
Ethyl Acrylate
Standard Practice for Thick Wall, Ring-Lined, Split
Barrel, Drive Sampling of Soils
Test Methods for Cobalt in Water
Performance Specification for Woven Drycleanable
Coat Fabrics
Specification for Rubber Surgical Gloves
Reporting Test Methods and Results on High Modulus
Fibers
Alcohol Content and Purity of Acetate Esters by Gas
Chromatography
Thickness or Height of Compacted Bituminous Paving
Mixture Specimens
Laboratory Preparation of Soil-Lime Mixtures Using a
Mechanical Mixer
D 3578
D 3552/D 3552M
D 3553
D 3554
D 3555
D 3556
D 3557
D 3559
D 3561
D 3564
D 3565
D 3566
D 3567
D 3568
D 3575
D 3576
D 3579
D 3569
D 3571
D 3574
D 3585
D 36
D 358
D 3580
Standard Specification for Rubber Examination Gloves
Tensile Properties of Fiber Reinforced Metal Matrix
Composites
Fiber Content by Digestion of Reinforced Metal Matrix
Composites
Standard Specification for Track-Resistant Black
Thermoplastic High-Density Polyethylene Insulation for
Wire and Cable, 75°C Operation
Standard Specification for Track-Resistant Black
Crosslinked Polyethylene Insulation for Wire and Cable,
90°C Operation
Deposition on Glassware During Mechanical
Dishwashing
Cadmium in Water
Lead in Water
Lithium, Potassium, and Sodium Ions in Brackish
Water, Seawater, and Brines by Atomic Absorption
Spectrophotometry
Application of Floor Polishes to Maintain Vinyl
Asbestos Tile or Flooring
Tableware Pattern Removal by Mechanical Dishwasher
Detergents
Rubber--Determination of Bromine in the Presence of
Chlorine by Oxygen Combustion
Determining Dimensions of "Fiberglass" (Glass-FiberReinforced Thermosetting Resin) Pipe and Fittings
Rubber--Evaluation of EPDM (Ethylene Propylene
Diene Terpolymers) Including Mixtures With Oil
Standard Test Methods for Flexible Cellular Materials
Made From Olefin Polymers
Cell Size of Rigid Cellular Plastics
Rubber Surgical Drainage Tubes, Penrose-Type
Joint Sealant, Hot-Applied, Elastomeric, Jet-FuelResistant-Type, for Portland Cement Concrete
Pavements
Household Laundry and Dishwasher Water Inlet Hose,
Consumer Products
Flexible Cellular Materials--Slab, Bonded, and Molded
Urethane Foams
ASTM Reference Fluid for Coolant Tests
Test Method for Softening Point of Bitumen (Ring-andBall Apparatus)
Wood to Be Used as Panels in Weathering Tests of
Coatings
Test Methods for Vibration (Vertical Linear Motion)
Test of Products
D 3581
D 3588
D 3590
D 3591
D 3594
D 3595
D 3596
D 3597
D 3598
D 360
D 3601
D 3607
D 3608
D 3609
D 3611
D 3622
D 3603
D 3605
D 3606
D 3623
D 3629
D 3610
D 3612
D 3613
D 3614
D 3616
Joint Sealant, Hot-Applied, Jet-Fuel-Resistant Type, for
Portland Cement Concrete and Tar-Concrete Pavements
Calculating Heat Value, Compressibility Factor, and
Relative Density (Specific Gravity) of Gaseous Fuels
Total Kjeldahl Nitrogen in Water
Determining Logarithmic Viscosity Number of
Poly(Vinyl Chloride) (PVC) in Formulated Compounds
Standard Test Method for Copolymerized Ethyl
Acrylate In Ethylene-Ethyl Acrylate Copolymers
Polychlorotrifluoroethylene (PCTFE) Extruded Plastic
Sheet and Film
Determination of Gels (Fisheyes) in General-Purpose
Poly(Vinyl Chloride) (PVC) Resins
Woven Upholstery Fabrics--Plain, Tufted, or Flocked
Citrate in Synthetic Detergents
Shellac Varnishes
Foam in Aqueous Media (Bottle Test)
Removing Volatile Contaminants from Used Engine
Oils by Stripping
Standard Test Method for Nitrogen Oxides (Combined)
Content in the Atmosphere by the Griess-Saltzman
Reaction
Calibration Techniques Using Permeation Tubes
Accelerated Aging of Pressure-Sensitive Tapes
Specification for 1-Propanol (n-Propyl Alcohol)
Rust-Preventing Characteristics of Steam Turbine Oil in
the Presence of Water (Horizontal Disk Method)
Trace Metals in Gas Turbine Fuels by Atomic
Absorption and Flame Emission Spectroscopy
Determination of Benzene and Toluene in Finished
Motor and Aviation Gasoline by Gas Chromatography
Testing Antifouling Panels in Shallow Submergence
Test Method for Rubber Property-Cut Growth
Resistance
Test Method for Total Cobalt In Alumina-Base CobaltMolybdenum Catalyst by Potentiometric Titration
Method
Standard Test Method for Analysis of Gases Dissolved
in Electrical Insulating Oil by Gas Chromatography
Sampling Insulating Liquids for Gas Analysis and
Determination of Water Content
Laboratories Engaged in Sampling and Analysis of
Atmospheres and Emissions
Standard Test Method for Rubber, Raw - Determination
of Gel, Swelling Index, and Dilute Solution Viscosity
D 3617
D 3618
D 3619
D 3620
D 3624
D 3625
D 3627
D 3628
D 3630
D 3631
D 3632
D 3633
D 3634
D 3635
D 3636
D 3638
D 3642
D 3643
D 3644
D 3639
D 3641
D 3645
D 3647
D 3648
D 3650
D 3651
D 3655
D 3656
D 3658
Sampling and Analysis of New Built-Up Roof
Membranes
Detection of Lead in Paint and Dried Paint Films
Aluminium Silicate Pigments (Anhydrous)
Glacial Acetic Acid
Low Concentrations of Mercury in Paint by Atomic
Absorption Spectroscopy
Effect of Water on Bituminous-Coated Aggregate Using
Boiling Water
Standard Test Method for Color of Cresylic Acids ("C"
Series Standards)
Selection and Use of Emulsified Asphalts
Determining Constituents Classified as Hazardous
Contained in Protective Coatings
Measuring Surface Atmospheric Pressure
Accelerated Aging of Adhesive Joints by the OxygenPressure Method
Electrical Resistivity of Membrane-Pavement Systems
Trace Chloride Ion in Engine Coolants
Copper in Electrical Insulating Oil by Atomic
Absorption Spectrophotometry
Standard Practice for Sampling and Judging Quality of
Solid Electrical Insulating Materials
Comparative Tracking Index of Electrical Insulating
Materials
Softening Point of Certain Alkali-Soluble Resins
Acid Number of Certain Alkali-Soluble Resins
Acid Number of Styrene-Maleic Anhydride Resins
Clasification of Asbestos Fibers by Quebec Standard
Test
Injection Molding Test Specimens of Thermoplastic
Molding and Extrusion Materials
Beryllium in Water
Classifying Reinforced Plastic Pultruded Shapes
According to Composition
Measurements of Radioactivity
Test Method for Comparison of Waterborne Petroleum
Oils By Fluorescence Analysis
Barium in Brackish Water, Seawater, and Brines
Men's and Women's Sliver Knitted Overcoat and Jacket
Fabrics
Insect Screening and Louver Cloth Woven from VinylCoated-Glass Yarns
Standard Test Method for Determining the Torque
Strength of Ultraviolet (UV) Light-Cured Glass/Metal
D 3662/D 3662M
D 3667
D 3659
D 3663
D 3664
D 3665
D 3666
D 3673
D 3674
D 3668
D 3670
D 3693
D 3705
D 3715/D 3715M
D 372
D 3675
D 3676
D 3677
D 3678
D 3679
D 368
D 3680
D 3681
D 3682
D 3724
Adhesive Joints
Test Method for Bursting Strength of Pressure-Strength
Tapes
Specification for Rubber Seals Used in Flat-Plate Solar
Collectors
Flammability of Apparel Fabrics by Semi-Restraint
Method
Surface Area of Catalysts
Standard Specification for Biaxially Oriented Polymeric
Resin Film for Capacitors in Electrical Equipment
Random Sampling of Construction Materials
Standard Specification for Minimum Requirements for
Agencies Testing and Inspecting Road and Paving
Materials
Chemical Analysis of Alpha Olefin Sulfonates
Carbon Black--Relative Extrusion Mass
Bearing Ratio of Laboratory-Compacted Soil-Lime
Mixtures
Determination of Precision and Bias of Methods of
Committee D-22
Labeled Length per Holder of Sewing Thread
Misting Properties of Lubricating Fluids
Quality Assurance of Pressure-Sensitive Tapes
Specification for Flexible Treated Sleeving Used for
Electrical Insulation
Surface Flammability of Flexible Cellular Materials
Using a Radiant Heat Energy Source
Rubber Cellular Cushion Used for Carpet or Rug
Underlay
Standard Test Methods for Rubber-Identification by
Infrared Spectrophotometry
Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile
Extrusions
Rigid Poly(Vinyl Chloride) (PVC) Siding
Specific Gravity of Creosote and Oil-Type Preservatives
Residual Vinyl Chloride Monomer Content of
Poly(Vinyl Chloride) Resins, Compounds, and
Copolymers by Solution Injection Technique
Chemical Resistance of "Fiberglass" (Glass-FiberReinforced Thermosetting-Resin) Pipe in a Deflected
Condition
Standard Test Method for Major and Minor Elements in
Combustion Residues from Coal Utilization Processes
Standard Specification for Synthetic Brown Iron Oxide
Pigment
D 3738
D 3767
D 3683
D 3684
D 3685/D 3685M
D 3689
D 369
D 3771
D 3956
D 3696
D 3686
D 3687
D 3690
D 3691
D 3692
D 3694
D 3695
D 3697
D 3698
D 3699
D 370
D 3700
D 3701
D 3702
F 2011
Specification for Rubber-Coated Cloth Hospital
Sheeting
Standard Practice for Rubber - Measurement of
Dimensions
Standard Test Method for Trace Elements in Coal and
Coke Ash by Atomic Absorption
Standard Test Method for Total Mercury in Coal by the
Oxygen Bomb Combustion/Atomic Absorption Method
Sampling and Determination of Particulate Matter in
Stack Gases
Standard Test Method for Individual Piles Under Static
Axial Tensile Load
Specific Gravity of Creosote Fractions and Residue
Specification for Rubber Seals Used in Concentrating
Solar Collectors
Methane Thermophysical Property Tables
Standard Practice for Evaluating an Effluent for Flavor
Impairment to Fish Flesh
Sampling Atmospheres to Collect Organic Compound
Vapors (Activated Charcoal Tube Adsorption Method)
Analysis of Organic Compound Vapors Collected by the
Activated Charcoal Tube Adsorption Method
Vinyl-Coated and Urethane-Coated Upholstery Fabrics-Indoor
Woven, Lace, and Knit Household Curtain and Drapery
Fabrics
Selection of Zippers for Care-Labeled Apparel and
Household Furnishings
Preparation of Sample Containers and for Preservation
of Organic Constituents
Volatile Alcohols in Water by Direct Aqueous-Injection
gas Constituents
Antimony in Water
Solvent Vapor Degreasing Operations
Kerosine
Dehydratioin of Oil-Type Preservatives
Containing Hydrocarbon Fluid Samples Using a
Floating Piston Cylinder
Test Method for Hydrogen Content of Aviation Turbine
Fuels by Low Resolution Nuclear Magnetic Resonance
Spectrometry
Test Method for Wear Rate and Coefficient of Friction
of Materials in Self-Lubricated Rubbing Contact Using
a Thrust Washer Testing Machine
F 2011 - 00
D 3703
D 3704
D 3706
D 3707
D 3708
D 3709
D 3711
D 6637
D 371
D 3712
D 3713
D 3716
D 3717
D 3718
D 3719
D 3720
D 3721
D 3722
D 3723
D 3725
D 3728
D 3730
D 3734
D 3735
D 3731
Peroxide Number of Aviation Turbine Fuels
Standard Test Method for Wear Preventive Properties of
Lubricating Greases Using the (Falex) Block on Ring
Test Machine in Oscillatin
Standard Test Method for Hot Tack of Wax-Polymer
Blends by the Flat Spring Test
Storage Stability of Water-in-Oil Emulsions by the
Oven Test Method
Standard Test Method for Weight of Wax Applied
During Curtain Coating Operation
Stability of Water-in-Oil Emulsions Under Low to
Ambient Temperature Cycling Conditions
Standard Test Method for Deposition Tendencies of
Liquids in Thin Films and Vapors
Standard Test Method for Determining Tensile
Properties of Geogrids by the Single or Multi-Rib
Tensile Method
Asphalt Roll Roofing (Organic Felt) Surfaced with
Mineral Granules; Wide Selvage
Standard Test Method of Analysis of Oil-Soluble
Petroleum Sulfonates by Liquid Chromatography
Measuring Response of Solid Plastics to Ignition by a
Small Flame
Testing Emulsion Polymers for Use in Floor Polishes
Low Concentrations of Antimony in Paint by Atomic
Absorption Spectroscopy
Low Concentrations of Chromium in Paint by Atomic
Absorption Spectroscopy
Standard Test Method for Quantifying Dirt Collection
on Coated Exterior Panels
Ratio of Anatase to Rutile in Titanium Dioxide
Pigments by X-Ray Diffraction
Synthetic Red Iron Oxide Pigment
Natural Red and Brown Iron Oxide Pigments
Pigment Content of Water-Emulsion Paints by LowTemperature Ashing
Semiquantitative of Fish Oil in Drying Oils and Drying
Oil Fatty Acids by Gas-Liquid Chromatography
2-Ethoxyethyl Acetate (99% Grade)
Testing High-Performance Interior Architectural Wall
Coatings
Standard Specification for High-Flash Aromatic
Naphthas
Standard Specification for VM∧P Naphthas
Measurement of Chlorophyll Content of Algae in
Surface Waters
D 3732
D 3733
D 3737
D 3739
D 374
D 3740
D 3741
D 3742
D 3743
D 3748
D 3762
D 3765
D 3744
D 3745
D 3746
D 3747
D 3749
D 374M
D 375
D 3751
D 3752
D 3753
D 3754
D 3755
D 3756
Standard Practice for Reporting Cure Times of
Ultraviolet-Cured Coatings
Silicon Content of Silicone Polymers and SiliconeModified Alkyds by Atomic Absorption
Standard Practice for Establishing Stresses for Structural
Glued Laminated Timber (Glulam)
Practice for Calculation and Adjustment of the Langelier
Saturation Index for Reverse Osmosis
Thickness of Solid Electrical Insulation
Standard Practice for Minimum Requirements for
Agencies Engaged in the Testing and/or Inspection of
Soil and Rock as Used in Engineering Design
Appearance of Admixtures Containing Halogenated
Organic Solvents
1,1,1-Trichloroethane Content
Bridge Deck and Substructure Proctection
Evaluating High-Density Rigid Cellular Thermoplastics
Adhesive-Bonded Surface Durability of Aluminum
(Wedge Test)
Carbon Black-CTAB (Cetyltrimethylammonium
Bromide) Surface Area
Aggregate Durability Index
Standard Practice for Installation of Prefabricated
Asphalt Reservoir, Pond, Canal, and Ditch Liner
(Exposed Type)
Impact Resistance of Bituminous Roofing Systems
Standard Specification for Emulsified Asphalt Adhesive
for Adhering Roof Insulation
Residual Vinyl Chloride Monomer in Poly(Vinyl
Chloride) Homopolymer Resins by Gas
Chromatographic Headspace Technique
Thickness of Solid Electrical Insulation (Metric)
Asbestos Roving
Evaluation of Evaluation of Furniture Polishes
Test Method for Strength Imparted by Asbestos to a
Cementitious Matrix
Glass-Fiber-Reinforced Polyester Manholes
"fiberglass" (Glass-Fiber-Reinforced ThermosettingResin) Sewer and Industrial Pressure Pipe
Dielectric Breakdown Voltage and Stength of Solid
Electrical Insulating Materials Under Direct-Voltage
Stress
Evaluation of Resistance to Electrical Breakdown by
Treeing in Solid Dielectric Materials Using Diverging
Fields
D 3757
D 3758
D 3760
D 3759
D 3759M
D 3761
D 3763
D 3764
D 3766
D 3768
D 3769
D 3772
D 3773
D 3774
D 3775
D 3776
D 378
D 3797
D 3798
D 38
D 3777
D 3778
D 3779
D 380
D 3800
D 3814
D 3816/D3816M
D 3785
D 6646
Preparing Specifications for Solvent Floor Polishes
Evaluation of Spray-Buff Products on Test Floors
Standard Test Method for Analysis of Isopropylbenzene
(Cumene) by Gas Chromatography
Tensile Strength and Elongation of Pressure-Sensitive
Tapes
Tensile Strength and Elongation of Pressure-Sensitive
Tapes {Metric}
Total Fluorine in Coal by the Oxygen Bomb
Combustion/Ion Selective Electrode Method
High-Speed Puncture Properties of Plastics Using Load
and Displacement Sensors
Validation of Process Stream Analyzers
Catalysts and Catalysis
Standard Test Method for Microcellular Urethanes Flexural Recovery
Standard Test Method for Microcellular Urethanes High-Temperature Sag
Rubber FInger Cots
Length of Woven Fabric
Width of Textile Fabric
Fabric Count of Woven Fabric
Mass Per Unit Area (Weight) of Fabric
Test Methods for Rubber (Elastomeric) Belting, Flat
Type
Test Method for Analysis of o-Xylene by Gas
Chromatography
Test Method for Analysis of p-Xylene by Gas
Chromatography
Test Methods for Sampling Wood Preservatives Prior to
Testing
Writing Specifications for Textiles
Women's and Girls' Drycleanable Woven Dress Coat
Fabrics
Women's and Girls' Woven Rainwear and All-Purpose,
Water-Repellent Coat Fabrics
Test Methods for Rubber Hose
Test Method for Density of High-Modulus Fibers
Guide for Locating Combustion Test Methods for
Polymeric Materials
Test Method for Water Penetration Rate of PressureSensitive Tapes
Woven Necktie and Scarf Fabrics
Standard Test Method for Determination of the
Accelerated Hydrogen Sulfide Breakthrough Capacity of
D 3780
D 3781
D 3782
D 3783
D 3784
D 3790
D 3791
D 3792
D 3793
D 3794
D 3795
D 3796
D 3799
D 3801
D 3805
D 3809
D 381
D 3802
D 3803
D 3804
D 3807
D 3813/D 3813M
D 3815/D 3815M
D 3806
D 3808
D 3810
Granular and Pelletized Activated Carbon
Men's and Boys' Woven Dress Suit Fabrics and Woven
Sportswear Jacket Slack, and Trouser Fabrics
Men's and Boy's Knitted Rainwear and All-Purpose,
Water-Repellent Coat Fabrics
Men's and Boys' Knitted Dress Suit Fabrics and Knitted
Sportswear Jacket Slack, and Trouser Fabrics
Woven Flat Lining Fabrics for Men's and Boys' Apparel
Men's and Boys' Woven Bathrobe and Dressing Gown
Fabrics
Volatile Matter (Moisture) of Leather by Oven Drying
Evaluating the Effects of Heat on Asphalts
Water Content of Water-Reducible Paints by Direct
Injection Into a Gas Chromatograph
Low-Temperature Coalescence of Latex Paint Films
Testing Coil Coatings
Test Method for Thermal Flow, Cure, and Behavior
Properties of Pourable Thermosetting Materials by
Torque Rheometer
Calibration of Type S Pitot Tubes
Purity of Styrene by Freezing Point Method
Standard Test Method for Measuring the Comparative
Burning Characteristics of Solid Plastics in a Vertical
Position
Guide for Application of Aluminium-Pigmented Asphalt
Roof Coatings
Standard Test Methods for Synthetic Dielectric Fluids
For Capacitors
Test Method for Gum Content in Fuels by Jet
Evaporation
Ball-Pan Hardness of Activated Carbon
Nuclear- Grade Activated Carbon
Iron in Paint Driers by EDTA Method
Strength Properties of Adhesives in Cleavage Peel by
Tension Loading (Engineering Plastics-to-Engineering
Plastics)
Curling and Twisting on Unwinding of PressureSensitive Tapes
Practice for Accelerated Aging of Pressure-Sensitive
Tapes by Carbon-Arc Exposure Apparatus
Small-Scale Evaluation of Fire-Retardant Paints (2-Foot
Tunnel Method)
Qualitative Determination of Adhesion of Adhesives to
Substrates by Spot Adhesion
Minimum Application Torque of Type IA Child-
D 3819
C 977
D 3828
D 3831
F 493
D 3820
D 3822
D 3823
D 3824
D 3825
D 3826
D 3827
D 3829
D 3832
D 3845
D 3854
D 3833/D 3833M
D 3835
D 3836
D 3837
D 3838
D 3839
D 3840
D 3841
D 3843
D 388
Resistant Closures
Men's and Boys' Woven Pajama Fabrics
Specification for Quicklime and Hydrated Lime for Soil
Stabilization
Flash Point by Small Scale Closed Tester
Manganese in Gasoline by Atomic Absorption
Spectrometry
Standard Specification for Solvent Cements for
Chlorinated Poly(vinyl Chloride) (CPVC) Plastic Pipe
and Fittings
Men's and Boys' Woven Underwear Fabrics
Tensile Properties of Single Textile Fibers
Practice for Determining Ticket Numbers of Sewing
Threads
Standard Test Methods for Continuous Measurement of
Oxides of Nitrogen in the Ambient or Workplace
Atmosphere by the Chemiluminescent Method
Standard Test Method for Dynamic Surface Tension by
the Fast-Bubble Technique
Determining Degradation End Point in Degradable
Polyethylene and Polypropylene Using a Tensile Test
Estimation of Solubility of Gases in Petroleum and
Other Organic Liquids
Predicting the Borderline Pumping Temperature of
Engine Oil
Rubber Seals Contacting Liquids in Solar Energy
Systems
Standard Specification for Glacial Methacrylic Acid
Test Method for Rubber Thread - Resistance to Dry
Heat
Test Method for Water Vapor Transmission of PressureSensitive Tapes
Determination of Properties of Polymeric Materials by
Means of a Capillary Rheometer
Evaluation of Automotive Polish
Preparing a Solution of Alkali-Soluble Resins
pH of Activated Carbon
Underground Installation of "Fiberglass" (Glass-FiberReinforced Thermosetting-Resin) Pipe
"Fiberglass" (Glass-Fiber-Reinforced ThermosettingResin) Pipe Fittings for Nonpressure Applications
Glass-Fiber-Reinforced Polyester Plastic Panels
Quality Assurance for Protective Coatings Applied to
Nuclear Facilities
Classification of Coals by Rank
D 395
D 3950
D 3951
D 3844
D 3846
D 3847
D 3848
D 3849
D 3850
D 3851
D 3852
D 3853
D 3855
D 3859
D 3875
D 3878
D 3856
D 3858
D 3860
D 3861
D 3862
D 3863
D 3864
D 3865
D 3866
D 3867
D 3868
Rubber Property--Compression Set
Specification for Strapping, Nonmetallic (and Joining
Methods)
Commercial Packaging
Labeling Halogenated Hydrocarbon Solvent Containers
In-Plane Shear Strength of Reinforced Plastics
Rubber--Directions for Achieving Subnormal Test
Temperatures
Rubber--Evaluation of NBR (Acrylonitrile-Butadiene
Copolymers) Mixed With Carbon Black
Test Method for Carbon Black - Primary Aggregate
Dimensions from Electron Microscope Image Analysis
Standard Test Method for Rapid Thermal Degradation
of Solid Electrical Insulating Materials By
Thermogravimetric Method (TGA)
Urethane Microcellular Shoe Soling Materials
Sampling and Handling Phenol and Cresylic Acid
Chemicals Used in Compounding
Test Method for Rubber Thread - Deterioration Due to
Standard Washing Solution Treatment
Selenium in Water
Alkalinity in Brackish Water, Seawater, and Brines
Standard Terminology for Composite Materials
Standard Guide for Good Laboratory Practices in
Laboratories Engaged in Sampling and Analysis of
Water
Test Method for Open-Channel Flow Measurement of
Water by Velocity-Area Method
Determination of Adsorptive Capacity of Activated
Carbon by Aqueous Phase Isotherm Technique
Test Method for Quantity of Water-Extractable Matter
in Membrane Filters
Standard Test Method for Retention Characteristics of
0.2-μm Membrane Filters Used in Routine
Filtration Procedures for the
Test Method for Retention Characteristics of 0.40 to
0.45-mu Membrane Filters Used in Routine Filtration
Procedures for the Evaluation of Microbiological Water
Quality
Standard Guide for Continual On-Line Monitoring
Systems for Water Analysis
Plutonium in Water
Silver in Water
Nitrite-Nitrate in Water
Test Method for Fluoride Ions in Brackish Water,
D 3869
D 387
D 3870
D 3871
D 3873
D 3874
D 3876
D 3877
D 3879
D 3880
D 3882
D 3883
D 3888
D 3884
D 3887
D 3889/D 3889M
D 3892
D 6652
D 3885
D 3886
D 3891
D 3893
D 3895
D 3896
D 391
D 3910
D 3923
Seawater, and Brines
Test Methods for Iodide and Bromide Ions in Brackish
Water, Seawater, and Brines
Test Method for Color and Strength of Chromatic
Pigments with a Mechanical Muller
Performance Characteristics for Colony Counting
Methods in Microbiology
Purgeable Organic Compounds in Water Using
Headspace Sampling
Valency State of the Arsenic Component of
Ammoniacal Copper Arsenate Solutions
Ignition of Materials by Hot Wire Sources
Methoxyl and Hydroxpropyl Substitution in Cellulose
Ether Products by Gas Chromatography
One-Dimensional Expansion, Shrinkage, and Uplift
Pressure of Soil-Lime Mixtures
Sampling Amphibole Asbestos
Asbesstos Strength Units
Bow and Skewness in Woven and Knitted Fabrics
Test Methods for Yarn Crimp and Yarn Take-up in
Woven Fabrics
Standard Terminology Relating to Open-End Spinning
Abrasion Resistance of Textile Fabrics (Rotary
Platform, Double-Head Method)
Tolerances for Knitted Fabrics
Test Method for Adherence to linerboard of PressureSensitive Tape at Low Temperature
Packaging/ Packing of Plastics
Standard Test Method for Determining Fibrous Debris
From Nonwoven Fabrics
Abrasion Resistance of Textile Fabrics (Flexing and
Abrasion Method)
Abrasion Resistance of Textile Fabrics (Inflated
Diaphragm Method)
Preparation of Glass Panels for Testing Paint, Varnish,
Lacquer, and Related Products
Test Method for Purity of Methyl Amyl Ketone and
Methyl Isoamyl Ketone by Gas Chromatography
Oxidative-Induction Time of Polyolefins by Differential
Scanning Calorimetry
Rubber from Synthetic Sources--Sampling
Standard Specification for Creosote-Coal Tar Solution
Design, Testing, and Construction of Slurry Seal
Practices for Detecting Leaks in Reverse Osmosis
Devices
D 3897
D 3898
D 3899
D 390
D 3900
D 3902
D 3903
D 3905
D 3906
D 3907
D 3908
D 3913
D 3915
D 3918
D 3909
D 3911
D 3912
D 3914
D 3916
D 3917
D 3919
D 3920
D 3921
D 3922
Calculation of Basicity of Chrome Tanning Liquors
Chromic Oxide in Basic Chromium Tanning Liquors
Rubber Contraceptives--Vaginal Diaphragms
Coal-Tar Creosote for the Preservative Treatment of
Piles, Poles and Timbers for Marine, Land, and Fresh
Water Use
Standard Test Methods for Rubber Raw - Determination
of Ethylene Units in EPM (Ethylene-Propylene
Copolymers) and EPDM (Ethylene-Propylene-Diene
Terpolym
Rubber Hose for Gas Diffusion of Liquefied Petroleum
Gas
Specification for Rubber Seals Used in Air-Heat
Transport of Solar Energy Systems
Toilet Tisue, Industrial
Relative Zeolite Diffrraction Intensities
Testing Fluid Catalytic (FCC) Cracking Catalysts by
Microactivity Test
Hydrogen Chemisorption on Supported Platinum on
Alumina Catalysts by Volumetric Vacuum Method
Acidity in Basic Chromium Tanning Liquors
Specification for Rigid Poly(Vinyl Chloride) (PVC) and
Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
for Plastic Pipe and Fittings Used in Pressure
Applications
Terms Relating to Reinforced Plastic Pultruded Products
Asphalt Roll Roofing (Glass Felt) Surfaced with
Mineral Granules
Evaluating Coatings Used in Light-Water Nuclear
Power Plants at Simulated Design Basis Accident
(DBA) Conditions
Chemical Resistance of Coatings Used in Light-Water
Nuclear Power Plants
In-Plane Shear Strength of Pultruded Glass-Reinforced
Plastic Rod
Tensile Properties of Pultruded Glass-Fiber-Reinforced
Plastic Rod
Dimensional Tolerance of Thermosetting GlassReinforced Plastic Pultruded Shapes
Measuring Trace Elements in Water by Graphite
Furnace Atomic Absorption Spectrophotometry
Strontium in Water
Oil and Grease and Petroleum Hydrocarbons in water
Estimating the Operating Performance of Granular
Activated Carbon for Removal of Soluble Pollutants
from Water
D 3924
D 3925
D 3926
D 3928
D 3939
D 3929
D 3930
D 3931
D 3933
D 3935
D 3936
D 3934
D 3937
D 3938
D 3941
D 3943
D 3944
D 3942
D 3945
D 3946
D 3948
D 3949
D 3953
D 3954
D 3955
D 3957
D 396
D 3969
Standard Environment for Conditioning and Testing
Paint, Varnish, Lacquer, and Related Materials
Sampling Liquid Paints and Related Pigmented Coatings
Percent Solids om Titanium Dioxide Slurries
Evaluation of Gloss or Sheen Uniformity
Snagging Resistance of Fabrics (Mace)
Evaluating Stress Cracking of Plastics by Adhesives
Using the Bent-Beam Method
Adhesives for Wood-Based Materials for Construction
of Manufactured Homes
Determining Strength of Gap-Filling Adhesive Bonds in
Shear by Compression Loading
Preparation of Aluminum Surfaces for Structural
Adhesives Bonding (Phosphric Acid Anodizing)
Polycarbonate (PC) Unfilled and Reinforced Materials
Resistance to Delamination of the Secondary Backing of
Pile Yarn Floor Covering
Flash/No Flash Test--Equilibrium Method by a ClosedCup Apparatus
Crimp Frequency of Man-Made Staple Fibers
Determining or Confirming Care Instructions for
Apparel and Other Textile Consumer Products
Flash Point by the Equilibrium Method with a ClosedCup Apparatus
Test Method for Total Molybdenum in Fresh AluminaBase Catalysts
Standard Test Method for Solidification Point of
Petroleum Wax
Determination of the Unit Cell Dimension of a
Faujasite- Type Zeolite
Shear Stability of Polymer-Containing Fluids Using a
Diesel Injector Nozzle
Evaluating the Bacteria Resistance of Water-Dilutable
Metalworking Fluids
Test Method for Determining Water Separation
Characteristics of Aviation Turbine Fuels by Portable
Separometer
Coated Glass Fabrics Used for Electrical Insulation
Strapping, Flat Steel and Seals
Dropping Point of Waxes
Electrical Insulating Varnishes
Establishing Stress Grades for Structural Members Used
in Log Buildings
Fuel Oils
Standard Test Method for Zirconium in Paint Driers by
D 3971
D 3958
D 3959
D 3961
D 3963/D 3963M
D 3966
D 3974
D 3960
D 3964
D 3965
D 3967
D 3968
D 3984
D 4000
D 3970
D 3972
D 3973
D 3975
D 3976
D 3978
D 3981
D 3982
D 3983
EDTA Method
Test Method for Dichloromethane-Soluble Matter in
Cellulose
Test Methods for Rubber - Evaluation of BIIR and CIIR
(Halogenated Isobutene - Isoprene Rubber)
Rubber- and Plastic-Coated Fabrics--Discoloration
Sensitivity to Tobacco Smoke
Trace Quantities of Sulfur in Liquid Aromatic
Hydrocarbons by Oxidative Microcoulometry
Standard Specification for Fabrication and Jobsite
Handling of Epoxy-Coated Steel Reinforcing Bars
Standard Practice for Determining Volatile Organic
Compound (VOC) Content of Paints and Related
Coatings
Practices for Extraction of Trace Elements from
Sediments
Determining Volatile Organic Compound (VOC)
Content of Paints and Related Coatings
Selection of Coating Specimens for Appearance
Measurements
Rigid Acrylonitrile-Butadiene-Styrene(ABS) Materials
for Pipe and Fittings
Splitting Tensile Strength of Intact Rock Core
Specimens
Monitoring of Rotational Torque of Type IIIA ChildResistant Closures
Ethane Thermophysical Property Tables
Standard Classification System for Specifying Plastic
Materials
Cerium in Paint Driers by Oxidimetric Determination
Isotopic Uramum in Water by Radiochemistry in Water
Low-Molecular Weight Halogenated Hydrocarbons in
Water
Practice for Development and Use (Preparation) of
Samples for Collaborative Testing of Methods for
Analysis of Sediments
Preparation of Sediment Samples for Chemical Analysis
Algal Growth Potential Testing with Selenastrum
Capricornutum
Medium-Density Polyethylene Films for General Use
and Packaging Applications
Contact Molded "Fiberglass" (Glass Fiber Reinforced
Thermosetting Resin) Duct and Hoods
Measuring Strength and Shear Modulus of Nonrigid
Adhesives by the Thick-Adherend Tensile-Lap
Specimen
D 3985
D 3990
D4
D 3986
D 3987
D 3988
D 6645
D 3989
D 3991
D 3992
D 3994
D 3995
D 3996
D 3997
D 420
D 4499
D 4715
D 3999
D 4001
D 4002
D 4003
D 4004
D 4005
D 4006
D 4007
D 4008
D 4028
Oxygen Gas Transmission Rate Through Plastic Film
and Sheeting Using a Coulometric Senser
Terminology Relating to Fabric Defects
Bitumen Content
barium in Brines, Seawater, and Brackish Water by
Direct-Current Argon Plasma Atomic Emission
Spectroscopy
Shake Extraction of Solid Waste with Water
Vanadium in Paint Driers by EDTA Method
Standard Test Method for Methyl (Comonomer) Content
in Polyethylene by Infrared Spectrophotometry
Standard Test Method for Total Rare Earth Metals in
Paint Driers by EDTA Method
Specifications for Fineness of Wool or Mohair and
Assignment of Grade
Specifications for Fineness of Wool Top or Mohair Top
and Assignment of Grade
Men's, Women's, and Children's Woven Swimwear
Fabrics
Men's and Women's Knitted Career Apparel Fabrics:
Dress and Vocational
Men's Women's, and Children's Knit Swimwear Fabrics
Preparing Coke Samples for Microscopical Analysis by
Reflected Light
Site Characterization for Engineering, Design and
Construction Purposes
Test Method for Heat Stability of Hot-Melt Adhesives
Coking Value of Tar and Pitch (Alcan)
Determination of the Modulus and Damping Properties
of Soils Using the Cyclic Triaxial Apparatus
Determination of Weight-Average Molecular Weight of
Polymers by light Scattering
Evaluation of Buffable Shoe Polish
Prgrammable Horizontal Impact Test for Shipping
Containers and Systems
Rubber--Determination of Metal Content by Flame
Atomic Absorption (AAS) Analysis
Plastic-Coated Fabrics--Completeness of Fusion of PVC
Dispersion Coatings
Water in Crude Oil by Distillation
Water and Sediment in Crude Oil by the Centrifuge
Method (Laboratory Procedure)
Measuring Anti-Soil Deposition Properties of Laundry
Detergents (Not Suitable for Detergent Ranking)
Solar Screening Woven from Vinyl-Coated Fiber Glass
D 4051
D 4055
D 4009
D 4010
D 4011
D 4012
D 4013
D 4014
D 4015
D 4016
D 4017
D 4018
D 4083
D 4195
D 4196
D 4199
D 4019
D 402
D 4020
D 4022
D 4023
D 4024
D 4025
D 4026
D 4027
D 4029
D 4030
Yarn
Preparation of Low-Pressure Gas Blends
Pentane Insolubles by Membrane Filtration
Foam Stability of Hand Dishwashing Detergents
Waterless Hand Cleaner
Lotion Soap
Adenosine Triphosphate (ATP) Content of
Microorganisms in Water
Practice for Preparation or Test Specimens of
Bituminous Mixtures by Means of Gyratory Shear
Compactor
Specification for Plain and Steel-Laminated Elastomeric
Bearings for Bridges
Standard Test Methods for Modulus and Damping of
Soils by the Resonant-Column Method
Viscosity of Chemical Grouts by the Brookfield
Viscometer (Laboratory Method)
Water in Paints and Paint Materials by Karl Fischer
Method
Test Methods for Properties of Continuous Filament
Carbon and Graphite Fiber Tows
Description of Frozen Soils (Visual-Manual Procedure)
Guide for Water Analysis for Reverse Osmosis
Application
Test Method for Confirming the Sterility of Membrane
Filters
Test Methods for Autoclavability of Membrane Filters
Moisture by Coulometric Regeneration of Phosphorus
Pentoxide
Distillation of Cut-Back Asphaltic (Bituminous)
Products
Standard Specification for Ultra-High-MolecularWeight Polyethylene Molding and Extrusion Materials
Coal Tar Roof Cement, Asbestos Containing
Humidity Measurements
Specification for Machine Made "Fiberglass" (GlassFiber-Reinforced Thermosetting Resin) Flanges
Reporting Results of Examination and Analysis of
Deposits Formed From Water for Subsurface Injection
Rubber Latex--Styrene-Butadiene Copolymer-Determination of Residual Styrene
Measuring Shear Properties of Structural Adhesives by
the Modified-Rail Test
Finished Woven Glass Fabrics
Glass Fiber Cord and Sewing Thread
D 4031
D 4032
D 4033
D 4034
D 4035
D 4037
D 4038
D 4039
D 4041
D 4042
D 4043
D 4044
D 4045
D 4046
D 4047
D 4048
D 4049
D 4050
D 4052
D 4053
D 4054
D 4056
D 4057
D 4059
D 4058
D 4060
D 4061
Bulk Properties of Textured Yarns
Stiffness of Fabric by the Circular Bend Procedure
Determining Yarn Slippage in Sewn Seams Made from
Upholstery Fabrics (Dynamic Fatigue Method)
Resistance to Yarn Slippage at the Sewn Seam in
Woven Upholstery Fabrics--Plain, Tufted, or Flocked
Knitted Necktie and Scarf Fabrics
Woven, Knitted, or Flocked Bedspread Fabrics
Women's and Girls' Woven Dress and Blouse Fabrics
Reflection Haze of High-Gloss Surfaces
Determining Spray Patterns of Manually Operated Pump
Dispensers
Sampling and Testing for Ash and Total Iron in Steel
Mill Dispersions of Rolling Oils
Selection of Aquifer Test Mehod in Determinining
Hydraulic Properties by Well Techniques
Instantaneous Change in Head (Slug Tests) for
Determining Hydraulic Properties of Aquifers
Sulfur in Petroleum Products by Hydrogenolysis and
Rateometric Colorimetry
Alkyl Nitrate in Diesel Fuels by Spectrophotometry
Standard Test Method for Phosphorus in Lubricating
Oils and Additives by Quinoline Phosphomolybdate
Method
Detection of Copper Corrosion from Lubricating Grease
Test Method for Determining the Resistance of
Lubricating Grease to Water Spray
Withdrawal and Injection Well Tests for Determining
Hydraulic Properties of Aquifer Systems Nonleaky
Density and Relative Density of Liquids by Digital
Density Meter
Benzene in Motor and Aviation Gasoline by Infrared
Spectroscopy
Evaluating the Compatibility of Additives with
Aviation-Turbine Fuels and Aircraft Fuel System
Materials
Standard Test Method for Estimation of Solubility of
Water in Hydrocarbon and Aliphatic Ester Lubricants
Manual Sampling of Petroleum and Petroleum Products
Standard Test Method for Analysis of Polychlorinated
Biphenyls in Insulating Liquids by Gas Chromatography
Attrition and Abrasion of Catalysts and Catalyst Carriers
Abrasion Resistance of Organic Coatings by the Taber
Abraser
Retroreflectance of Horizontal Coatings
D 4062
D 4063
D 4072
D 4077
D 4064
D 4065
D 4066
D 4067
D 4068
D 4069
D 4070
D 4071
D 4073
D 4074
D 4075
D 4078
D 4079
D 4080
D 4081
D 4082
D 4084
D 4085
D 409
D 4102
D 413
D 4165
Leveling of Paints by Draw-Down Method
Specification for Pressboard for Electrical Insulating
Purposes
Toluene-Insoluble (TI) Content of Tar and Pitch
Standard Specification for Cumene (Isopropylbenzene)
Preservative Treatment of Utility Poles by the Thermal
Process
Determining and Reporting Dynamic Mechanical
Properties of Plastics
Standard Classification System for Nylon Injection and
Extrusion Materials (PA)
Reinforced and Filled Polyphenylene Sulfide (PPS)
Injection Molding and Extrusion Materials
Chlorinated Polyethylene (CPE) Sheeting for Concealed
Water-Containment Membrane
Impregnated Activated Carbon Used to Remove
Gaseous Radio-Iodines from Gas Streams
Adhesive Lubricant for Installation of Preformed
Elastomeric Bridge Compression Seal in Concrete
Structures
Practice for Use of Portland Cement Concrete Bridge
Deck Water Barrier Membrane Systems
Tensile-Tear Strength of Bituminous Roofing
Membranes
Bitumen and Aggregate Content of Bitumen-Aggregate
Mixtures From Roofing Samples
Compounding Materials--Flame Atomic Absorption
Technique--Determination of Metals
Water Emulsion Floor Polish
Vapor-Degreasing Grade Methylene Chloride
Standard Specification for Trichloroethylene, Technical
and Vapor-Degreasing Grade
Drycleaning-Grade Perchloroethylene
Effects of Radiation on Coatings for Use in Light-Water
Nuclear Power Plants
Test Method for Analysis of Hydrogen Sulfide in
Gaseous Fuels (Lead Acetate Reaction Rate Method)
Metals in Cellulose by Atomic Absorption
Spectrophotometry
Test Method for Grindability of Coal by the HardgroveMachine Method
Test Method for Thermal Oxidative Resistance of
Carbon Fibers
Rubber Property--Adhesion to Flexible Substrate
Test Method for Cyanogen Chloride in Water
D 4086
D 4088
D 4092
D 4093
D 4094
D 4095
D 4096
D 4097
D 4099
D 41
D 4101
D 4103
D 4104
D 4105
D 4106
D 4107
D 4109
D 411
D 4110
D 4111
D 4112
D 4113
D 4114
D 4115
D 4116
Visual Evaluation of Metamerism
Preparation for Shipment of Solid Electrical Insulating
Materials
Dynamic Mechanical Measurements on Plastics
Photoelastic Measurements of Birefringence and
Residual Strains in Transparent or Translucent Plastic
Materials
Standard Test Method for Acid Content of EthyleneAcrylic Acid Copolymers
Use of the Refractometer for Determining Nonvolatile
Matter (Total Solids) in Floor Polishes
Determination of Total Suspended Particulated Matter in
the Atmosphere (High Volume Sampler Method)
Contact-Molded Glass-Fiber-Reinforced Thermoset
Resin Corrosin-Resistant Tanks
Poly(Vinyl Chloride) (PVC) Prime Windows
Asphalt Primer Used in Roofing, Dampproofing, and
Waterproofing
Standard Specification for Polypropylene Injection and
Extrusion Materials
Preparation of Substrate Surfaces for Coefficient of
Friction Testing
(Analytical Procedure) for Determining Transmissivity
of Nonleaky Confined Aquifers By Overdaimped Well
Response to Instantaneous Change in Head (Slug Test)
Determining Transmissivity and Storage Coefficient of
Nonleaky Confined Aquifers by the Modified Theis
Nonequilibrium Method
Determining Transmissivity and Storage Coefficient of
Nonleaky Confined Aquifers by the Rheis
Nonequilibrium Method
Tritum in Drinking Water
Men's and Boys' Woven Coverall, Dungaree, Overall,
and Shop Coat Fabrics
Shellac Used for Electrical Insulation
Men's and Boy's Knitted Bathrobe, Dressing Gown, and
Pajama Fabrics
Woven Napery and Tablecloth Fabrics: Household and
Institutional
Woven Umbrella Fabrics
Woven Slipcover Fabrics
Woven Flat Lining Fabrics for Women's and Girls'
Apparel
Women's and Girl's Knitted and Woven Dress Glove
Fabrics
Women's and Girl's Knitted and Woven Corset-Girdle-
D 4117
D 4118
D 4119
D 4120
D 4122
D 4123
D 4124
D 4125
D 4127
D 4129
D 4130
D 4126
D 4128
D 4131
D 4132
D 4133
D 4134
D 4135
D 4136
D 4137
D 4138
D 4139
D 4140
D 4141
D 4142
D 4143
D 4144
Combination Fabrics
Women's and Girls' Woven Robe, Negligee, Nightgown,
Pajama, Slip and Lingerie Fabrics
Women's Woven Coverall, Dungaree, Overall, and Shop
Coat Fabrics
Men's and Boys' Knitted Dress Shirt Fabrics
Fiber Cohesion in Roving, Sliver, and Top (Dynamic
Tests)
Carbon Black--Evaluation of an Industry Reference
Black
Test Method for Indirect Tension Test for Resilient
Modulus of Bituminous Mixtures
Separation of Asphalt into Four Fractions
Standard Test Methods for Asphalt Content of
Bituminous Mixtures by the Nuclear Method
Glossary of Terms Used with Ion-Selective Electrodes
Total and Organic Carbon in Water by HighTemperature Oxidation and Coulometric Detection
Sulfate Ion in Brackish Water, Seawater, and Brines
Vapor-Degreasing Grade and General Solvent Grade
1,1,1-Trichloroethane
Identification of Organic Compounds in Water by
Combined Gas Chromatography and Electron Impact
Mass Spectrometry
Sampling Fish with Rotenone
Sampling Phytoplankton with Conical Tow Nets
Sampling Phytoplankton with Pumps
Sampling Phytoplankton with a Clarke-Bumpus
Plankton Sampler
Sampling Phytoplankton with Depth-Integrating
Samplers
Sampling Phytoplankton with Water-Sampling Bottles
Preserving Phytoplankton Samples
Measurement of Dry Film Thickness of Protective
Coating Systems by Destructive Means
Determining Volatile and Nonvolatile Content of
Pigments
Determining Volatile and Nonvolatile Content of Driers,
Drying Oils, Naval Stores, and Solvents
Conducting Accelerated Outdoor Exposure Tests of
Coatings
Testing Epoxy Resins
Testing Latex Vehicles
Estimating Package Stability of Coatings for Ultraviolet
Curing
D 4145
D 4147
D 4149
D 4150
D 4146
D 4148
D 4151
D 4153
D 4154
D 4155
D 4156
D 4157
D 4158
D 4161
D 4164
D 4166
D 4167
D 4168
D 4169
D 4170
D 4175
D 4191
D 4192
D 4171
D 4172
D 4174
D 4176
Coating Flexibility of Prepainted Sheet
Applying Coil Coatings Using the Wire-Wound
Drawdown Bar
Sampling Phytoplankton in Surface Waters
Gaseous Fuels
Formability of Zinc-Rich Primer/Chromate Complex
Coatings on Steel
Analysis of Phytoplankton in Surface Water by the
Sedgwick-Rafter Method
Flammability of Blankets
Men's, Women's, and Children's Woven Handkerchief
Fabrics
Men's and Boys' Knitted and Woven Beachwear and
Sport Shirt Fabrics
Women's and Girls' Woven Sportswear, Shorts, Slacks,
and Suiting Fabrics
Women's and Girls' Knitted Sportswear Fabrics
Abrasion Resistance of Textile Fabrics (Oscillatory
Cylinder Method)
Standard Guide for Abrasion Resistance of Textile
Fabrics (Uniform Abrasion)
"Fiberglass" (Glass-Fiber-Reinforced ThermosettingResin) Pipe Joints Using Flexible Elastomeric Seals
Mechanically Tapped Packing Density of Formed
Catalyst and Catalyst Carriers
Measurement of Thickness of Nonmagnetic Materials
by Means of a Digital Magnetic Intensity Instrument
Fiber-Reinforced Plastic Fans and Blowers
Transmitted Shock Characteristics of Foam-in-Place
Cushioning Materials
Standard Practice for Performance Testing of Shipping
Containers and Systems
Fretting Wear Protection by Lubricating Greases
Terminology Relating to Petroleum, Petroleum
Products, and Lubricants
Sodium in Water by Atomic Absorption
Spectrophotometry
Potassium in Water by Atomic Absorption
Spectrophotometry
Fuel System Icing Inhibitors
Test Method for Wear Preventive Characteristics of
Lubricating Fluid (Four-Ball Method)
Cleaning, Flushing, and Purification of Petroleum Fluid
Hydraulic Systems
Free Water and Particulate Contamination in Distillate
D 4177
D 4178
D 4179
D 4180
D 4181
D 4182
D 4185
D 4186
D 4186
D 4188
D 4189
D 4190
D 4193
D 4194
D 4198
D 4200
D 4204
D 4214
D 4223
D 4201
D 421
D 4211
D 4203
D 4206
D 4208
Fuels (Visual Inspection Procedures)
Automatic Sampling of Petroleum and Petroleum
Products
Calibrating Moisture Analyzers
Single Pellet Crush Strength of Formed Catalyst
Shapes
Vibratory Packing Dencity of Formed Catalyst Particles
and Catalyst Carriers
Acetal (POM) Molding and Extrusion Materials
Evaluation of Laboratories Using ASTM Procedures in
the Sampling and Analysis of Coal and Coke
Measurement of Metals in Workplace Atmosphere by
Flame Atomic Absorption Spectrophotometry
One-Dimensional Consolidation Properties of Soils
Using Controlled-Strain Loading
One-Dimensional Consolidation Properties of Soils
Using Controlled-Strain Loading
Practice for Performing Pressure In-Line CoagulationFlocculation-Filtration Test
Silt Density Index (SDI) of Water
Elements in Water by Direct-Current Argon Plasma
Atomic Emission Spectroscopy
Thiocyanate in Water
Operating Characteristics of Reverse Osmosis Devices
Test Methods for Evaluating Absorbent Pads Used with
Membrane Filters for Bacteriological Analysis and
Growth
Test Method for Evaluating Inhibitory Effects of Ink
Grids on Membrane Filters
Practice for Preparing Plastic Film Specimens for a
Round-Robin Study
Evaluating the Degree of Chalking of Exterior Paint
Films
Practice for Preparation of Test Specimens of AsphaltStabilized Soils
Coliphages in Water
Dry Preparation of Soil Samples for Particle-Size
Analysis and Determination of Soil Constants
Fish Sampling
Styrene-Acrylonitrile (SAN) Injection and Extrusion
Materials
Sustained Burning of Liquid Mixtures by the Setaflash
Apparatus (Open Cup)
Total Chlorine in Coal by the Oxygen Bomb
Combustion/Ion Selective Electrode Method
D 4209
D 4210
D 4212
D 4262
D 427
D 4321
D 4213
D 4215
D 4216
D 4217
D 4218
D 4219
D 422
D 4220
D 4221
D 4225
D 4226
D 4249
D 4261
D 4236
D 4222
D 4228
D 4230
D 4232
D 4233
D 4234
Determining Volatile and Nonvolatile Content of
Cellulosics, Emulsions, Resin Solutions, Shellac, and
Varnishes
Intralaboratory Quality Control Procedures and a
Discussion on Reporting Low-Level Data
Viscosity by Dip-Type Viscosity Cups
pH of Chemically Cleaned or Etched Concrete Surfaces
Shrinkage Factors of Soils by the Mercury Method
Test Method for Package Yield of Plastic Film
Scrub Resistance of Paints by Abrasion Weight Loss
Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
Specification for Rigid Poly(Vinyl Chloride) (PVC) and
Related PVC and Chlorinated Poly(Vinyl Chloride)
(CPVC) Building Products Compounds
Gel Time of Thermosetting Coating Powder
Determination of Carbon Black Content in Polyethylene
Compounds By the Muffle-Furnace Technique
Unconfined Compressive Strength Index Test of
Chemical-Grouted Soils
Particle-Size Analysis of Soils
Standard Practices for Preserving and Transporting Soil
Samples
Dispersive Characteristics of Clay Soil by Double
Hydrometer
Styrene-Butadiene Sheeting
Standard Test Methods for Impact Resistance of Rigid
Poly(Vinyl Chloride) (PVC) Building Products
Test Method for Enumeration of Candida albicans in
Water
Surface Cleaning Concrete Unit Masonry for Coating
Standard Practice for Labeling Art Materials for Chronic
Health Hazards
Determination of Nitrogen Adsorption and Desorptiojn
Isotherms of Catalysts by Static Volumetric
Measurements
Qualification of Coating Applicators for Application of
Coatings to Steel Surfaces
Measuring Humidity with Cooled-Surface Condensation
(Dew-Point) Hygrometer
Men's and Women's Dress and Vocational Career
Apparel Fabrics
Women's and Girls' Knitted and Woven Brassiere
Fabrics
Women's and Girls' Knitted Robe, Negligee,
Nightgown, Pajama, Slip, and Lingerie Fabrics
D 4235
D 4238
D 4239
D 4241
D 4242
D 4243
D 4244
D 4245
D 4246
D 4247
D 4248
D 425
D 4258
D 4259
D 4250
D 4251
D 4252
D 4253
D 4254
D 4255/D 4255M
D 4260
D 4263
D 4265
D 4266
D 4267
D 4268
Women's and Girls' Knitted Blouse and Dress Fabrics
Electrostatic Propensity of Textiles
Test Methods for Sulfur in the Analysis Sample of Coal
and Coke Using High-Temperature Tube Furnace
Combustion Methods
Design of Gas Turbine Generator Lubricating Oil
Systems
Glass Plate Flow for Thermosetting Coating Powders
Measurement of Average Viscometric Degree of
Polymerization of New and Aged Electrical Papers and
Board
General-Purpose, Heavy-Duty, and Extra-Duty
Acrylonitrile-Butadiene/Polyvinyl Chlorode
(NBR/PVC) Jackets for Wire and Cable
Ozone-Resistant Thermoplastic Elastomer Insulation for
Wire and Cable, 90°C Dry/75°C Wet Operation
Ozone-Resistant Thermoplastic Elastomer Insulation for
Wire adn Cable, 90°C Operation
General-Purpose, Black Heavy-Duty, and Black ExtraHeavy-Duty Crosslinked Polychloroprene Jackets for
Wire and Cable
Design of Steam Turbine Generator Oil Systems
Centrifuge Misture Equivalent of Soils
Surface Cleaning Concrete for Coating
Abrading Concrete
Water-Holding Capacity of Bibulous Fibrous Products
Active Matter in Anionic Surfactants by Potentiometric
Titration
Chemical Analysis of Alcohol Ethoxylates and
Alkylphenol Ethoxylates
Maximum Index Density and Unit Weight of Soild
Using a Vibratory Table
Minimum Index Desity and Unit Weight of Soils and
Calculation of Relative Density
Testing Inplane Shear Properties of Composite
Laminates
Acid Etching Concrete
Indicating Moisture in Concrete by the Plastic Sheet
Method
Evaluating Stain Removal Performance in Home
Laundering
Precoat Capacity of Powdered Ion-Exchange Resins
Labels for Small-Volume (100 mL or Less) Parenteral
Drug Containers
Testing Fiber Ropes
D 4270
D 4271
D 4293
D 4296
D 4307
D 4316
D 4272
D 4273
D 4274
D 4276
D 4277
D 4283
D 4275
D 4278
D 4279
D 4280
D 4281
D 4282
D 4284
D 4285
D 4286
D 4287
D 4288
D 4289
D 429
D 4290
D 4291
Standard Guide for Using Existing Practices in
Developing and Writing Test Methods
Standard Practice for Writing Statements on Sampling
in Test Methods for Textiles
Phosphate Ester Based Fluids for Turbine Lubrication
Practice for Sampling Pitch
Practice for Preparation of Liquid Blends for Use as
Analytical Standards
Standard Specification for Elastomeric Water Bottles
Total Energy Impact of Plastic Films By Dart Drop
Test Methods for Polyurethane Raw Materials:
Determination of Primary Hydroxyl Content of
Polyether Polyols
Test Methods for Testing Polyurethane Raw Materials:
Determination of Hydroxyl Numbers of Polyols
Confined Area Entry
Testing Amino Resins
Viscosity of Silicone Fluids
Determination of Butylated Hydroxy Toluene (BHT) in
Polymers of Ethylene and Ethylene-Vinyl Acetate
(EVA) Copolymers by Gas Chromatograph
Wet Ashing Procedure for Preparing Wood Samples for
Inorganic Chemical Analysis
Water Vapor Transmission of Shipping Containers Constant and Cycle Methods
Extended Life Type, Nonplowable, Prismatic, Raised,
Retroreflective Pavement Markers
Oil and Grease (Fluorocarbon Extractable Substances)
by Gravimetric Determination
Determination of Free Cyanide in Water and
Wastewater by Microdiffusion
Determination Pore Volume Distribution of Catalysts by
Mercrry Intrusion Porosimetry
Indicating Oil or Water in Compressed Air
Determining Coating Contractor Qualifications for
Nuclear Powered Electric Generation Facilities
High-Shear Viscosity Using the ICI Cone/Plate
Viscometer
Calcium Borosilicate Pigments
Compatibility of Lubricating Grease with Elastomers
Standard Test Methods for Rubber Property - Adhesion
to Rigid Substrates
Determining the Leakage Tendencies of Automotive
Wheel Bearing Grease Under Accelerated Conditions
Trace Ethylene Glycol in Used Engine Oil
D 4292
D 4294
D 4295
D 43
D 430
D 4300
D 4297
D 4298
D 4301
D 4302
D 4303
D 4304
D 4305
D 4306
D 4308
D 4309
D 4310
D 4311
D 4312
D 4313
D 4314
D 4315
D 4317
D 4318
D 4319
D 4329
Determination of Vibrated Bulk Density of Calcined
Petroleum Coke
Sulfur in Petroleum and Petroleum Products by EnergyDispersive X-Ray Fluorescence Spectrometry
Rubber Compounding Materials--Zine Oxide
Standard Specification for Coal Tar Primer Used in
Roofing, Dampproofing, and Waterproofing
Standard Test Methods for Rubber Deterioration Dynamic Fatigue
Ability of Adhesive Films to Support or Resist thr
Growth of Fungi
Sampling and Handling 4,4-Isopropylidenediphenol
(Bisphenol A)
Intercomparing Permeation Tubes to Establish
Traceability
Total Chlorine in Epoxy Resins and Compounds
Artists' Oil, Resin-Oil, and Alkyd Paints
Lightfastness of Pigments Used in Artists' Paints
Standard Specification for Mineral Lubricating Oil Used
in Steam or Gas Turbines
Filter Flow of Aviation Fuels at Low Temperatures
Aviation Fuel Sample Containers for Tests Affected by
Trace Contamination
Standard Test Method for Electrical Conductivity of
Liquid Hydrocarbons by Precision Meter
Sample Digestion Using Closed Vessel Microwave
Heating Technique for the Determination of Total
Metals in Water
Determination of the Sludging and Corrosion
Tendencies of Inhibited Mineral Oils
Determining Asphalt Volume Correction to a Base
Temperature
Standard Test Method for Toluene-Insoluble (TI)
Content of Tar and Pitch (Short Method)
General-Purpose, Heavy-Duty, and Extra-Heavy-Duty
Crosslinked Chlorinated Polyethylene (CM) Jackets for
Wire and Cable
General-Purpose, Heavy-Duty-Duty, Crosslinked
Chlorosulfonated Polyethylene Jackets for Wire and
Cable
Rubber Compounding Materials--Zinc Oxide
Polyvinyl Acetate-Based Emulsion Adhesives
Liquid Limit, Plastic Limit, and Plasticity Index of Soils
Distribution Ratios by the Short-Term Batch Method
Fluorescent UV Exposure of Plastics
D 4339
D 4350
D 4354
D 4324
D 4320
D 4322
D 4323
D 4325
D 4326
D 4327
D 4328
D 4330
D 4332
D 4337
D 4403
D 4428/D 4428M
D 4444
D 4338
D 434
D 4340
D 4341
D 4342
D 4349
D 4355
D 4356
D 4359
Standard Test Method for Determination of the Odor of
Adhesives
Standard Test Method for Corrosivity Index of Plastics
and Fillers
Practice for Sampling of Geosynthetics for Testing
Carbon Black, Pelleted--Pellet Attrition
Laboratory Preparation of Chemically Grouted Soil
Specimens for Obtaining Desing Strength Parameter
Residual Acrylonitrile Monomer Styrena-Acrylonitrile
Copolymers and Nitrile Rubber by Headspace Gas
Chromatography
Hydrogen Sulfide in the Atmosphere by Rate of Change
of Reflectance
Nonmetallic Semi-Conducting and Electrically
Insulating Rubber Tapes
Major and Minor Elements in Coal and Coke Ash by XRay Flurorescence
Anions in Water by Chemically-Suppressed Ion
Chromatography
Calculation of Supersaturation of Barium Sulfate,
Strontium Sulfate, and Calcium Sulfate Dihydrate
(Gypsum) in Brackish Water, Seawater, and Brines
Evaluation of Fiberglass Boat Polish and Wax
Standard Practice for Conditioning Containers,
Packages, or Packaging Components for Testing
Analysis of Linear Detergents Alkylates
Standard Practice for Extensometers Used in Rock
Test Methods for Crosshole Seismic Testing
Use and Calibration of Hand-Held Moisture Meters
Flexibility Determination of Supported Adhesive Films
by Mandrel Bend Test Method
Resistance to Slippage of Yarns in Woven Fabrics Using
a Standard Seam
Corrosion of Cast Aluminum Alloys in Engine Coolants
Under Heat-Rejecting Conditions
Test Method for Creep of Cylindrical Hard Rock Core
Specimens in Uniaxial Compression
Collecting Benthic Macroinvertebrates with Ponar Grab
Sampler
Polyphenylene Ether (PPE) Materials
Test Method for Deterioration of Geotextiles from
Exposure to Ultraviolet Light and Water (Xenon-Arc
Type Apparatus)
Establishing Consistent Test Method Tolerances
Test Method for Determining Whether a Material Is a
D 4343
D 4344
D 4345
D 4346
D 4347
D 4348
D 4352
D 4357
D 4358
D 4360
D 4362
D 4373
D 4400
D 4361
D 4363
D 4364
D 4365
D 4366
D 4367
D 4368
D 4369
D 4370
D 4372
D 4371
D 4374
D 4375
Liquid or a Solid
Collecting Benthic Macroinvertebrates with Ekman
Grab Sampler
Collecting Benthic Macroinvertebrates with SmithMclntyre Grab Sampler
Collecting Benthic Macroinvertebrates with Van Veen
Grab Sampler
Collecting Benthic Macroinvertebrates with Okean 50
Grab Sampler
Collecting Benthic Macroinvertebrates with Shipek
(Scoop) Grab Sampler
Collecting Benthic Macroinvertebrartes with Holme
(Scoop) Grab Sampler
Determination of Magnetiic Meterial Impurities in
Electrical Grade Magnesium Oxide
Plastic Laminates Made from Woven-Roving and
Woven-Yarn Glass Fabrics
Lead and Chromium in Air Particulate Filter Samples of
Lead Chromate Type Pigment Dusts by Atomic
Absorption Spectroscopy
Specification for Methyl n-Amyl Ketone
Propane Thermophysial Property Tables
Calcium Carbonate Content of Soils
Sag Resistance of Paints Using a Multinotch Applicator
Apparent Tack of Printing Inks and Vehicles by a ThreeRoller Tackmeter
Thermoplastic Chlorinated Polyethylene (CM) Jacket
for Wire and Cable
Performing Accelerated Outdoor Weathering of Plastics
Using Concentrated Natural Sunlight
Determining Micropore Volume and Zeolite Area of a
Catalyst +
Hardness of Organic Coatings by Pendulum Damping
Tests
Benzene in Hydrocarbon Solvents by Gas
Chromatography
Testing Poly(Vinyl Chloride) Resins
Boxed Facial Tissue, Industrial and Institutional
Standard Test Methods for Acid and Base
Milliequivalent Content of Electrocoat Bath
Flame-Resistant Materials Used in Camping Tentage
Determining the Washability Characteristics of Coal
Cyanides in Water--Automated Methods for Total
Cyanide, Acid Dissociable Cyanide, and Thiocyanate
Basic Statistics in Committee D-19 on Water
D 4376
D 4377
D 4378
D 4380
D 4381
D 4382
D 4383
D 4385
D 4386
D 4387
D 4388
D 4389
D 4391
D 4393
D 4395
D 4396
D 4397
D 440
D 4394
D 4398
D 4399
D 4401
D 4402
D 4404
Vapor-Degreasing Grade Perchloroethylene
Water in Crude Oils by Volumetric Karl Fischer
Titration
In-Service Monitoring of Mineral Turbine Oils for
Steam and Gas Turbines
Density of Bentonitic Slurries
Sand Content by Volume of Bentonitic Slurries
Barium in Water, Atomic Absorption
Spectrophotometry, Graphite Furnace
Plowable, Raised Retroreflective Pavement Markers
Classifying Visual Defects in Thermosetting Reinforced
Plastic Pultruded Products
Application of Floor Polishes to Maintain Multilayer
Composite Tile or Flooring
Selecting Grab Sampling Devices for Collecting Benthic
Macroinvertebrates
Nonmetallic Semi-Conducting and Electrically
Insulating Rubber Tapes
Finished Glass Fabrics Woven From Roving
Burning Behavior of Textiles
Test Method for Strap Peel Adhesion of Reinforcing
Cords or Fabrics to Rubber Compounds
Test Method for Determining the In Situ Modulus of
Deformation of Rock Mass Using the Flexible Plate
Loading Method
Specification for Rigid Poly(Vinyl Chloride) (PVC) and
Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
for Plastic Pipe and Fittings Used in Nonpressure
Applications
Standard Specification for Polyethylene Sheeting for
Construction, Industrial, and Agricultural Applications
Coal
Test Method for Determining the In Situ Modulus of
Deformation of Rock Mass Using the Rigid Plate
Loading Method
Determining the Chemical Resistance of FiberglassReinforced Thermosetting-Resins by One-Side Panel
Exposure
Measuring Electrical Conductivity of Electrocoat Baths
Collecting Benthic Macroinvertebrates with Petersen
Grab Sampler
Viscosity Determinations of Unfilled Asphalts Using the
Brookfield Thermosel Apparatus
Test Method for Determination of Pore Volume and
Pore Volume Distribution of Soil and Rock by Mercury
Intrusion Porosimetry
D 4416
D 4421
D 4422
D 4424
D 4405
D 4406
D 4407
D 4409
D 441
D 4410
D 4411
D 4412
D 4413
D 4414
D 4415
D 4417
D 4418
D 4419
D 4420
D 4423
D 4425
D 4426
D 4427
D 4429
D 4430
D 4431
Specification for Acrylic Acid
Volatile Matter in Petroleum Coke
Ash in Analysis of Petroleum Coke
Standard Test Method for Butylene Analysis by Gas
Chromatography
Creep of Cylindrical Soft Rock Core Specimens in
Uniaxial Compression
Test Method for Creep of Cylindrical Rock Core
Specimens in Triaxial Compression
Collecting Benthic Macroinvertebrates with Orange Peel
Grab Sampler
Test Method for Velocity Measurements of Water in
Open Channels with Rotating Element Current Meters
Tumbler Test for Coal
Fluvial Sediment
Sampling Fluvial Sediment in Motion
Sulfate-Reducing Bacteria in Water and Water-Formed
Deposits
Determination of Ethylene Oxide in Workplace
Atmospheres (Charcoal Tube Methodology)
Standard Practice for Measurement of Wet Film
Thickness by Notch Gages
Standard Test Methods for Determination of Dimer in
Acrylic Acid
Test Methods for Field Measurement of Surface Profile
of Blast Cleaned Steel
Standard Practice for Receipt, Storage, and Handling of
Fuels for Gas Turbines
Standard Test Method for Measurement of Transition
Temperatures of Petroleum Waxes by Differential
Scanning Calorimetry (DSC)
Test Method for Determination of Aromatics in Finished
Gasoline by Gas Chromatography
Standard Test Method for Determination of Carbonyls
In C&inf4; Hydrocarbons
Oil Separation from Lubricating Grease by Centrifuging
(Koppers Method)
Determination of Percent Nonvolatile Content of Liquid
Phenolic Resins Used for Wood Laminating
Classification of Peat Samples by Laboratory Testing
Standard Test Method for CBR (California Bearing
Ratio) of Soils in Place
Standard Practice for Determining the Operational
Comparability of Meteorological Measurements
Paper Towels for Industrial and Institutional Use
D 4432
D 4435
D 4436
D 4439
D 4434
D 4438
D 444
D 4440
D 4441
D 4442
D 4443
D 4445
D 4471
D 4472
D 448
D 4482
D 4447
D 4448
D 4446
D 4449
D 445
D 4450
D 4451
D 4452
D 4453
D 4485
D 449
D 4498
Purchasing Papers Used in Continuous Computer Forms
Test Method for Rock Bolt Anchor Pull Test
Test Method for Rock Bolt Long-Term Load Retention
Test
Terminology for Geosynthetics
Poly(Vinyl Chloride) Sheet Roofing
Particle Size Distribution of Catalytic Material by
Electronic Counting
Chemical Analysis of Zinc Yellow Pigment (Zinc
Chromate Yellow)
Rheological Measurement of Polymer Melts Using
Dynamic Mechanical Procedures
Aqueous Dispersions of Polytetrafluorethylene
Direct Moisture Content Measurement of Wood and
Wood-Base Materials
Analysis for Determining Residual Vinyl Chloride
Monomer Content in PPB Range in Vinyl Chloride
Homo- and Co- Polymers by Headspace Gas
Chromatograph
Fungicides for Controlling Sapstain and Mold on
Unseasoned Lumber (Laboratory Method)
Test Method for Pyridine Bases in Cresylic Acid by
Direct Titration
Guide for Recordkeeping for Reverse Osmosis Systems
Sizes of Aggregate for Road and Bridge Construction
Test Method for Rubber Property - Extension Cycling
Fatigue
Disposal of Laboratory Chemicals and Samples
Sampling Groundwater Monitoring Wells
Anti-Swelling Effectiveness of Water-Repellent
Formulations and Differential Swelling of Untreated
Wood When Exposed to Liquid Water Environment
Visual Evaluation of Gloss Differences Between
Surfaces of Similar Appearance
Standard Test Method for Kinematic Viscosity of
Transparent and Opaque Liquids (the Calculation of
Dynamic Viscosity)
Analysis of Zinc Hydroxy Phosphite Pigment
Pigment Content of Paints by Low-Temperature Ashing
Methods for X-Ray Radiography of Soil Samples
Handling of Ultra-Pure Water Samples
Standard Specification for Performance of Engine Oils
Asphalt Used in Dampproofing and Waterproofing
Test Method for Heat-Fail Temperature in Shear of Hot
Melt Adhesives
D 4454
D 4455
D 4456
D 4457
D 4458
D 4459
D 446
D 4460
D 4462
D 4463
D 4464
D 4465
D 4466
D 6644
D 4467
D 4468
D 4469
D 4470
D 4473
D 4474
D 4475
D 4476
D 4477
D 4479
D 4481
Simultaneous Enumeration of Total and Respiring
Bacteria in Aquatic Systems by Microscopy
Enumeration of Aquatic Bacteria by Epifluorescence
Microscopy Counting Procedure
Physical and Chemical Properties of Powdered Ion
Exchange Resins
Determination of Dichloromethane and 11,1,1Trichloroethane in Paints and Coatings by Direct
Injection into a Gas Chromatograph
Test Method for Chloride Ions in Brackish Water,
Seawater, and Brines
Xenon-Arc Exposure of Plastics Intended for Indoor
Applications
Standard Specifications and Operating Instructions for
Glass Capillary Kinematic Viscometers
Practice for Calculating Precision Limits Where Values
are Calculated from Other Test Methods
Zinc Hydroxy Phosphite Pigment
Steam Deactivation of Fresh Fluid Cracking Catalysts
Test Method for Particle Size Distribution of Catalytic
Material by Laser Light Scattering
Zippers for Denim Dungarees
Multicomponent Textile Fibers
Standard Test Method for Tension Strength of SewThrough Flange Buttons
Standard Practice for Interlaboratory Testing of a Textile
Test Method That Produces Non-Normally Distributed
Data
Standard Test Method for Total Sulfur in Gaseous Fuels
by Hydrogenolysis and Rateometric Calorimetry
Calculating Percent Asphalt Absorption by the
Aggregate in an Asphalt Pavement Mixture
Static Electrification
Measuring the Cure Behavior of Thermosetting Resins
Using Dynamic Mechanical Procedures
Standard Classification System for Styrenic
Thermoplastic Elastomer Injection Molding and
Extrusion Materials (TES)
Apparent Horizontal Shear Strength of Pultruded
Reinforced Plastic Rods by the Short-Beam Method
Flexural Properties of Fiber Reinforced Pultruded
Plastic Rods
Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC)
Soffit
Asphalt Roof Coatings--Asbestos Free
Total Nickel in Fresh Alumina- Base Catalysts
D 4483
D 4486
D 4487
D 4488
D 4489
D 4490
D 4491
D 4492
D 4494
D 4495
D 4496
D 450
D 4493
D 4497
D 4500
D 4501
D 4502
D 4503
D 4508
D 4514
D 4527
D 4528
D 453
D 4504
D 4505
D 4506
Practice for Determining Precision for Test Method
Standards in the Rubber and Carbon Black Industries
Standard Test Method for Kinematic Viscosity of
Volatile and Reactive Liquids
Analysis of Calcium Borosilicate
Testing Cleaning Performance of Products Intended for
Use on Resilient Flooring and Washable Walls
Sampling of Waterborne Oils
Measuring the Concentration of Toxic Gases or Vapors
Using Detector Tubes
Standard Test Methods for Water Permeability of
Geotextiles by Permittivity
Analysis of Benzene by Gas Chromatography
Test Method for Detecting Residual Odor of
Drycleaning Grade Perchloroethylene
Standard Test Method for Impact Resistance of
Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of
a Falling Weight
DC Resistance or Conductance of Moderately
Conductive Materials
Standard Specification for Coal-Tar Pitch Used in
Roofing, Dampproofing, and Waterproofing
Solidification Point of Bisphenol A (4,4Isopropylidenediphenol)
Determining the Open Time of Hot Melt Adhesives
(Manual Method)
Determining Grit, Lumps, or Undissolved Matter in
Water-Borne Adhesives
Standard Test Method for Shear Strength of Adhesive
Bonds Between Rigid Substrates by the Block-Shear
Method
Heat and Moisture Resistance of Wood-Adhesive Joints
Dissolution of Solid Waste by Lithium Metaborate
Fusion
Chip Impact Strength of Plastics
Specification for Friction Tape
Carbon Black--Solvent Extractables
Rubber Compounding Materials--Sulfur
Test Method for Tar Acids in Creosote-Coal Tar
Solutions
Molded Polyethylene Open-Head-Pails for Industrial
Shipping of Nonhazardous Goods
Preformed Plastic Pavement Marking Tape for Extended
Service Life
Determining the IN Situ Modulus of Deformation of
D 4509
D 451
D 4510
D 4511
D 4512
D 4513
D 4573
D 4579
D 4515
D 4516
D 4517
D 4518
D 4519
D 452
D 4520
D 4521
D 4522
D 4523
D 4524
D 4525
D 4526
D 4529
D 4530
D 4531
D 4532
D 4533
D 4539
Rock Mass Using a Radial Jacking Test
Determining the 24-Hour Gas (AIR) Space
Acetaldehyde Content of Freshly Blown PET Bottles
Sieve Analysis of Granular Mineral Surfacing For
Asphalt Roofing Products
Counting Partial Cleavages in Wool and Other Animal
Fibers
Standard Test Method for Hydraulic Conductivity of
Essentially Saturated Peat
Vibrated Apparent Packaging Density of Fine Catalyst
and Catalyst Carrier Particles and Powder
Particle Size Distribution of Catalytic Materials by
Sieving
Rubber Chemicals--Determination of Oil Content in OilTreated Sulfur
Standard Practice for Handling an Acid Degreaser or
Still
Standard Practice for Estimation of Holding Time for
Water Samples Containing Organic Constituents
Standardizing Reverse Osmosis Performance Data
Test Method for Low-Level Total Silica in High-Purity
Water by Flameless Atomic Absorption Spectroscopy
Measuring Static Friction of Coating Surfaces
Test Method for On-Line Determination of Anions and
Carbon Dioxide in High Purity Water by Cation
Exchange and Degassed Cation Conductivity
Sieve Analysis of Surfacing for Asphalt Roofing
Products
Determining Water Injectivity Through the Use of OnSite Floods
Coefficient of Static Friction of Corrugated and Solid
Fiberboard
Feather-Filled and Down-Filled Products
Feather-Filled and Down-Filled Products
Composition of Plumage
Permeability of Rocks by Flowing Air
Determination of Volatiles in Polymers by Headspace
Gas Chromatograph
Standard Test Method for Estimation of Net Heat of
Combustion of Aviation Fuels
Determination of Carbon Residue (Micro Method)
Bulk Density of Peat and Peat Products
Respirable Dust in Workplace Atmospheres
Water Trapezoid Tearing Strength of Geotextiles
Filterability of Diesel Fuels by Low-Temperature Flow
D 454
D 4544
D 4547
D 4535
D 4545
D 4548
D 4534
D 4536
D 4537
D 4538
D 4541
D 4542
D 4543
D 4546
D 4549
D 455
D 4550
D 4551
D 4552
D 4553
D 4554
D 4559
D 4569
D 4571
D 456
D 4560
Test (LTFT)
Test Method for Rubber Deterioration by Heat and Air
Pressure
Estimating Peat Deposit Thickness
Sampling Waste and Soils for Volatile Organics
Compounds
Standard Test Methods for Measurement of Thermal
Expansion of Rock Using a Dilatometer
Practice for Determining the Integrity of Factory Seams
Used in Joining Manufactured Flexible Sheet
Geomembranes
Anion-Cation Balance of Mixed Bed Ion-Exchange
Resins
benzene Content of Cyclic Products by Gas
Chromatography
High-Volume Sampling for Solid Particulate Matter and
Determination of Particular Emissions
Establishing Procedures to Qualify and Certify
Inspection Personnel for Coating Work in Nuclear
Facilities
Power Generation Facilities
Pull-Off Strength of Coatings Using Portable Adhesion
Testers
Pore Water Extraction and Determination of the Soluble
Salt Content of Soils by Refractometer
Preparing Rock Core Specimens and Determining
Dimensional and Shape Tolerances
One-Dimensional Swell or Settlement Potential of
Cohesive Soils
Standard Specification for Polystyrene and RubberModified Polystyrene Molding and Extrusion Materials
(PS)
Milled Toilet Soap
Thermoplastic Elastomer-Ether-Ester (TEEE)
Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed
Water-Containment Membrane
Classifying Hot-Mix Recycling Agents
Determining In Situ Creep Characteristics of Rock
Situ Determination of Direct Shear Strength of Rock
Discontinuities
Volatile Matter in Silicone Fluid
Rubber Chemicals--Determination of Acidity in Sulfur
Rubber Chemicals--Determination of Volatile Material
Caustic Soda (Anhydrous)
Paper Napkins for Industrial and Institutional Use
D 4562
D 4564
D 4555
D 4556
D 4557
D 4558
D 4561
D 4563
D 4565
D 4566
D 4567
D 4568
D 457
D 4570
D 4572
D 4574
D 4575
D 4576
D 4577
D 4578
D 458
D 4584
D 4585
D 459
D 4596
Standard Test Method for Shear Strength of Adhesives
Using Pin-and-Collar Specimen
Density of Soil In Place by the Sleeve Method
Determining Deformability and Strength of Weak Rock
by an In Situ Uniaxial Compressive Test
Selecting Stream-Net Sampling Devices for Collecting
Benthic Macroinvertebrates
Collecting Benthic Macroinvertebrates with Surber and
Relates Type Samplers
Collecting Benthic Macroinvertebrates with Drift Nets
Quality Control Systems for Organizations Producing
and Applying Bituminous Paving Materials
Determination by Atomic Absorption Spectroscopy of
Titanium Dioxide Content of Pigments Recovered from
Whole Paint
Physical and Environmental Performance Properties of
Insulations and Jackets for Telecommunications Wire
and Cable
Electrical Performance Properties of Insulations and
Jackets for Telecommunications Wire and Cable
Single-Point Determination of Specific Surface Area of
Catalysts Using Nitrogen Adsorption by Continuous
Flow Method
Evaluating Compatibility Between Cable Filling and
Flooding Compound and Polyolefin Wire and Cable
Materials
Modified Soda (Sesquicarbonate Type)
Rubber Chemicals--Determination of Particle Size of
Sulfur by Sieving (Dry)
Rubber Chemicals--Wet Sieve Analysis of Sulfur
Rubber Chemicals--Determination of Ash Content
Test Methods for Rubber Deterioration - Reference and
Alternative Method(s) for Determining Ozone Level in
Laboratory Test Chambers
Standard Test Method for Mold Growth Resistance of
Wet Blue
Test Method for Compression Resistance of a Container
Under Constant Load
Rubber Chemicals--Determination of Percent Insoluble
Sulfur by Solvent Extraction
Soda Ash
Measuring Apparent pH of Electrocoat Baths
Practice for Testing Water Resistance of Coatings Using
Controlled Condensation
Terminology Relating to Soaps and Other Detergents
Collection of Channel Samples of Coal in a Mine
D 4580
D 4581
D 4582
D 4583
D 4587
D 4601
D 4609
D 4589
D 4590
D 4591
D 4592
D 4594
D 4595
D 4597
D 4599
D 460
D 4600
D 4611
D 4620
D 4602
D 4606
D 4608
D 461
D 4603
Measureing Delaminations in Concrete Bridge Decks by
Sounding
Measurement of Morphologic Characteristics of Surface
Water Bodies
Calculation and Adjustment of the Stiff and Davis
Stability Index for Reverse Osmosis
Carbon Black--Calculation of Process Indexes From an
Analysis of Process Control Data
Conducting Tests on Paint and Related Coatings and
Materials Using a Fluorescent UV-Condensation Lightand Water -Exposure Apparatus
Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
Evaluating Effectiveness of Chemicals for Soil
Stabilization
Nitrobenzene in Aniline
Standard Test Method for Calorimetric Determination of
p-tert-Butylcatechol In Styrene Monomer or AMS
(α-Methylstyrene) by Spectrophotomet
Determining Temperatures and Heats of Transitions of
Fluoropolymers by Differential Scanning Calorimetry
Preformed Plastic Pavement Marking Tape for Limited
Service Life
Effects of Temperature on Stability of Geotextiles
Tensile Properties of Geotextiles by the Wide Width
Strip Method
Sampling Workplace Atmospheres to Collect Gases or
Vapors with Solid Sorbent Diffusive Samplers
Measuring the Concentration of Toxic Gases or Vapors
Using Length-of-Stain Dosimeters
Sampling and Chemical Analysis of Soaps and Soap
Products
Standard Test Method for Determination of BenzeneSoluble Particulate Matter in Workplace Atmospheres
Standard Test Method for Specific Heat of Rock and
Soil
Evaluating the Effective Surface Area of Zinc Oxide in
Rubber
Nondestructive Testing of Pavements Using CyclicLoading Dynamic Deflection Equipment
Standard Test Method for Determination of Arsenic and
Selenium in Coal by the Hydride Generation/Atomic
Absorption Method
Citrate in Detergents
Felt
Determining Inherent Viscosity of Poly(Ethylene
Terephthalate) (PET)
D 4604
D 4607
D 4610
D 4612
D 4613
D 4614
D 4615
D 4616
D 4617
D 4618
D 4619
D 4621
D 4622
D 4623
D 4624
D 4625
D 4626
D 4644
D 4649
D 4627
D 4630
D 4631
D 4628
D 4629
Measurement of Cotton Fibers by High Volume
Instruments (HVI) (Motion Control Fiber Information
System)
Determination of Iodine Number of Activated Carbon
Determining the Presence of and Removing Microbial
(Fungal or Algal) Growth on Paint and Related Coatings
Thermal Diffusivity of Rocks
Measuring Apparent pH of Water Insoluble PhenolFormaldehyde Resins
Specification for Ethyl Acetate (All Grades)
Standard Specification for n-Butyl Acetate (All Grades)
Standard Test Method for Microscopical Analysis by
Reflected Light and Determination of Mesophase in a
Pitch
Phenolic Compounds (PF)
Design and Fabrication of Flue Gas Desulfurization
System Components for Protective Lining Application
Inspection of Linings in Operating Flue Gas
Desulfurization Systems
Accountability and Quality Control in the Coal Analysis
Laboratory
Rock Mass Monitoring Using Inclinometers
Determination of In Situ Stress in Rock Mass by
Overcoring Method -- USBM Borehole Deformation
Gage
Measuring Apparent Viscosity by Capillary Viscometer
at High-Temperature and High-Shear Rates
Distillate Fuel Storage Stability at 43°C (110°F)
Practice for Calculation of Gas Chromatographic
Response Factors
Test Method for Slake Durability of Shales and Similar
Weak Rocks
Standard Guide for Selection and Use of Stretch Wrap
Films
Iron Chip Corrosion for Water-Dilutable Metalworking
Fluids
Determining Transmissivity and Storage cofficient of
Low Permeability Rocks by In-Situ Measurements
Using the Constant Head Injection Test
Standard Test Method for Determining Transmissivity
and Storativity of Low Permeability Rocks by In Situ
Measurements Using Pr
Analysis of Barium, Calcium, Magnesium, and Zinc In
Unused Lubricating Oils By Atomic Absorption
Spectrometry
Trace Nitrogen in Liquid Petroleum Hydrocarbons by
D 4632
D 4634
D 4635
D 4636
D 4650
D 4651
D 4687
D 471
D 4637
D 4638
D 4639
D 464
D 4640
D 4641
D 4642
D 4643
D 4645
D 4646
D 4647
D 4648
D 4652
D 4653
D 465
D 4654
D 4655
D 4656
Syringe/Inlet Oxidative Combustion and
Chemiluminescence Detection
Standard Test Method for Grab Breaking Load and
Elongation of Geotextiles
Styrene-Maleic Anhydride Materials (S/MA)
Low-Density Polyethylene Films for General Use and
Packaging Applications
Corrosiveness and Oxidation Stability of Hydraulic Oils,
Aircraft Turbine Engine Lubricants, and Other Highly
Refined Oils
Normal Butane Thermophysical Property Tables
Isobutane Thermophysical Property Tables
Standard Guide for General Planning of Waste Sampling
Rubber Property-Effect of Liquids
EPDM Sheet Used in Single-Ply Roof Membrane
Guide for Preparation of Biological Samples for
Inorganic Chemical Analysis
Volatile Content in Phenolic Resins
Test Methods for Saponification Number of Naval Store
Products Including Tall Oil and Other Related Products
Determining Stroke Cure Time of Thermosetting
Phenol-Formaldehyde Resins
Calculation of Pore Distributions of Catalysts from
Catalysts from Nitrogen Desorption Isotherms
Platinum in Reforming Catalysts by Wet Chemistry
Test Method for Determination of Water [Moisture]
Content of Soil by the Microwave Oven Method
Determination of the In Situ Stress in Rock Using the
Hydraulic Fracturing Method
Standard Test Method for 24-h Batch-Type
Measurement of Contaminant Sorption by Soils and
Sediments
Test Method for Identification and Classification of
Dispersive Clay Soils by the Pinhole Test
Standard Test Method for Laboratory Miniature Vane
Shear Test for Saturated Fine-Grained Clayey Soil
Silicone Fluid Used for Electrical Insulation
Total Chlorides in Leather
Acid Number of Naval Stores Products Including Tall
Oil Other Related Products
Sulfate Basicity in Leather
Sulfates in Leather (Total, Neutral, and Combined Acid)
Prediluted Aqueous Ethylene Glycol Based Engine
Coolant (50 Volume-% Minimum) for Automobiles and
Light-Duty Service
D 4657
D 4675
D 4677
D 4658
D 4659
D 4660
D 4661
D 4662
D 4663
D 4669
D 4670
D 4671
D 4672
D 4673
D 4674
D 4676
D 4678
D 4679
D 4680
D 4684
D 4686
D 4682
D 4683
D 4688
D 4689
Polynuclear Aromatic Hydrocarbons in Water
Guide for Selection and Use of Flat Strapping Materials
Rubber Compounding Materials--Titanium Dioxide
Sulfide Ion in Water
Polyurethane Raw Materials: Determination of Specific
Gravity of Isocyanates
Standard Test Methods for Polyurethane Raw Materials:
Determination of the Isomer Content of
Toluenediisocyanate
Polyurethane Raw Materials: Determination of Total
Chlorine in Isocyanates
Polyurethane Raw Materials: Determination of Acid and
Alkalinity Numbers of Polyols
Polyurethane Raw Materials: Determination of
Hydrolyzable Chlorine of Isocyanates
Polyurethane Raw Materials: Determination of Specific
Gravity of Polyols
Urethane Raw Materials: Determination of Suspended
Matter in Polyols
Test Methods for Polyurethane Raw Materials:
Determination of Unsaturation of Polyols
Standard Test Methods for Polyurethane Raw Materials:
Determination of Water Content of Polyols
Acrylonitrile-Butadiene-Styrene (ABS) Plastics and
Alloys Molding and Extrusion Materials
Accelerated Testing for Color Stability of Plastics
Exposed to Indoor Fluorescent Lighting and WindowFiltered Daylight
Rubber Compounding Materials--Antidegradants
Rubber--Preparation, Testing, Acceptance,
Documentation, and Use of Reference Materials (IRM)
Standard Specification for Rubber General Purpose,
Household or Beautician Gloves
Creep and Time to Failure of Adhesives in Static Shear
by Compression Loading (Wood-to-Wood)
Test Method for Determination of Yield Stress and
Apparent Viscosity of Engine Oils at Low Temperature
Identification of Frequency Distributions
Miscibility with Gasoline and Fluidity of Two-StrokeCycle Gasoline Engine Lubricants
Measuring Viscosity at High Shear Rate and High
Temperature by Taperead Bearing Simulator
Evaluating Structural Adhesives for Fingerjointing
Lumber
Adhesive, Casein-Type
D 4696
D 4708
D 4690
D 4691
D 4692
D 4693
D 4694
D 4695
D 4697
D 4698
D 4699
D 470
D 4700
D 4701
D 4703
D 4704
D 4705
D 4702
D 4706
D 4707
D 4709
D 4710
D 4711
D 4712
D 4713
D 4714
Standard Guide for Pore-Liquid Sampling from the
Vadose Zone
Preparation of Uniform Free Films of Organic Coatings
Urea-Formaldehyde Resin Adhesives
Measuring Elements in Water by Flame Atomic
Absorption Spectrophotometry
Calculation and Adjustment of Sulfate Scaling Salts
(CaSO4, SrSO4, and BaSO4) for Reverse Osmosis
Low-Temperature Torque of Grease-Lubricated Wheel
Bearings
Deflections with Falling-Weight-Type Impulse Load
Device
General Pavement Deflection Measurements
Standard Guide for Maintaining Test Methods in the
User's Laboratory
Total Digestion of Sediment Samples for Chemical
Analysis of Varous Metals
Vibratory Packing Density of Large Formed Catalyst
Particles
Crosslinked Insulations and Jackets for Wire and Cable
Soil Sampling From the Vadose Zone
Technical Grade Methylene Chloride
Standard Practice for Compression Molding
Thermoplastic Materials into Test Specimens, Plaques,
or Sheets
Test Method for Tearing Strength, Tongue Tear of
Leather
Stitch Tear Strength of Leather, Double Hole
Inspecting Crosscut, Sweep-Arm, and Auger
Mechanical Coal-Sampling Systems for Conformance
with Current ASTM Standards
Qualitative Determination of Methylol Group in
Phenolic Resins
Measuring Paint Spatter Resistance During Roller
Application
Methyl Acrylate
Acetaldehyde
Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic
Acids
Standard Guide for Testing Industrial Water-Reducible
Coatings
Nonvolatile Content of Heatset and Liquid Printing Ink
Systems
Determination of Effect of Moist Heat (50 % Relative
Humidity and 90°C) on Properties of Paper and Board
D 4716
D 4718
D 4720
D 4724
D 4730
D 4751
D 4772
D 4721
D 4723
D 4725
D 4726
D 4727/D 4727M
D 4728
D 473
D 4729
D 4731
D 4732
D 4733
D 4840
D 4943
D 4734
D 4735
D 4737
D 4739
Test Method for CONSTANT HEAD HYDRAULIC
TRANSMISSIVITY [IN-PLAIN FLOW] OF
GEOTEXTILES AND GEOTEXTILE RELATED
PROCUCTS
Correction of Unit Weight and Water Content for Soils
Containing Oversize Particles
Evaluation of the Performance of Soft Window
Coverings
Test Method for Entanglements in Filament Yarns by
Needle Insertion
Flooding Compounds for Telecommunications Wire and
Cable
Test Method for Determining Apparent Opening Size of
a Geotextile
Surface Water Absorption of Terry Fabrics (Water
Flow)
Evaluation of the Performance of Machine Washable
and Drycleanable Bedcoverings and Accessories
Index and Descriptions of Textile Heat and
Flammability Test Methods and Performance
Specifications
Engine Coolants
Specification for Rigid Poly(Vinyl Chloride) (PVC)
Exterior-Profile Extrusions Used for Assembled
Windows and Doors
Corrugated and Solid Fiberboard Sheet Stock (Container
Grade) and Cut Shapes
Standard Test Method for Random Vibration Testing of
Shipping Containers
Sediment in Crude Oils and Fuel Oils by the Extraction
Method
In Situ Stress and Modulus of Deformation
Determination Using the Flatjack Method
Hot-Application Filling Compounds for
Telecommunications Wire and Cable
Cool-Application Filling Compounds for
Telecommunications Wire and Cable
Solventless Electrical Insulating Varnishes
Guide for Sample Chain-of-Custody Procedures
Standard Test Method for Shrinkage Factors of Soils by
the Wax Method
Refined Benzene-545
Standard Test Method for Determination of Trace
Thiophene in Refined Benzene by Gas Chromatography
Calculated Cetane Index by Four Variable Equation
Base Number Determination by Potentiometric
D 4740
D 4741
D 4742
D 4743
D 4744
D 4745
D 4945
D 4947
D 4746
D 4747
D 4748
D 475
D 4754
D 4755
D 5199
D 4749
D 4750
D 4752
D 4753
D 520
D 5832
D 4756
D 4757
D 4758
Titration
Standard Test Method for Cleanliness and Compatibility
of Residual Fuels by Spot Test
Standard Test Method for Measuring Viscosity at High
Temperature and High Shear Rate by Tapered-Plug
Viscometer
Oxidation Stability of Gasoline Automotive Engine Oils
by Thin-Film Oxygen Uptake(TFOUT)
Efficary of Solvent Systems for Dissolving WaterFormed Deposits
Organic Halides in Water by Carbon AdsorptionMicrocoulometric Detection
Filled Compounds of Polytetrafluoroethylene (PTFE)
Molding and Extrusion Materials
Standard Test Method for High-Strain Dynamic Testing
of Piles
Test Method for Chlordane and Heptachlor Residues in
Indoor Air
Determination of Quinoline Insolubles (QI) in Tar and
Pitch by Pressure Filtration
Determining Unreacted Monomer Content of Latexes
Using Gas Chromatography
Determining the Thickness of Bound Pavement Layers
Using Short-Pulse Radar
Pure Para Red Toner Pigment
Two-Sided Liquid Extraction of Plastic Materials Using
FDA Migration Cells
Test Method for Free Halogens in Halogenated Organic
Solvents and Their Admixtures
Test Method for Measuring the Nominal Thickness of
Geosynthetics
Performing the Sieve Analysis of Coal and Designating
Coal Size
Determining Subsurface Liquid Levels in a Borehole or
Monitoring Well (Observation Well)
Measuring MEK Resistance of Ethyl Silicate (Inorganic)
Zinc-Rich Primers by Solvent Rub
Evaluating, Selecting, and Specifying Balances and
Scales for Use in Soil and Rock Testing
Specification for Zinc Dust Pigment
Volatile Matter Content of Activated Carbon Samples
Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding
and Soffit
Placarding Solvent Vapor Degreasers
Nonvolatile Content of Latexes
D 4759
D 476
D 4761
D 4762
D 4763
D 4764
D 4765
D 4766
D 4767
D 4773
D 4774
D 4775
D 4784
D 6643
D 4768
D 4769
D 4771
D 4785
D 4795
D 4796
D 4776
D 4778
D 4779
Determining the Specification Conformance of
Geosynthetics
Titration Dioxide Pigments
Mechanical Properties of Lumber and Wood-Base
Structural Material
Testing Automotive/Industrial Composite Materials
Standard Practice for Identification of Chemicals in
Water by Fluorescence Spectroscopy
Standard Test Method for Determination by X-ray
Fluorescence Spectroscopy of Titanium Dioxide
Content in Paint
Fluorides in Workplace Atmospheres
Vinyl Chloride in Workplace Atmospheres (Charcoal
Tube Method)
Consoidated-Undrained Triaxial Compression Test on
Cohesive Soils
Purity of Propylene Glycol Monomethyl Ether,
Dipropylene Glycol Monomethyl Ether, and Propylene
Glycol Monomethyl Ether Acetate
Standard Specification for User Applied Drug Labels in
Anesthesiology
Identification and Configuration of Prefilled Syringes
and Delivery Systems for Drugs (Excluding Pharmacy
Bulk Packages)
LNG Density Calculation Models
Standard Test Method for Testing Wood-Base Panel
Corner Impact Resistance
Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6Ditertiary-Butyl Phenol in Insulating Liquids by Gas
Chromatography
Woven and Warp Knitted Comforter Fabrics
Knitted Upholstery Fabrics for Indoor Furniture
Standard Test Method for Low-Level Iodine-131 in
Water
Nitrogen Content of Soluble Nitrocellulose--Alternative
Method
Bond Strength of Thermoplastic Traffic Marking
Materials
Adhesion of Tire Cords and Other Reinforcing Cords to
Rubber Compounds by H-Test Procedure
Test Method for Determination of Corrosion and
Fouling Tendency of Cooling Water Under Heat
Transfer Conditions
Total, Organic, and Inorganic Carbon in High Purity
Water by Ultraviolet (UV) or Persulfate Oxidation, or
Both, and Infrared Detection
D 478
D 4780
D 4781
D 4782
D 4783
D 4786
D 4787
D 4788
D 4789
D 4790
D 4792
D 4793
D 4794
D 4791
D 4797
D 4798
D 4800
D 4814
D 482
D 4799
D 480
D 4801
D 4802
D 4803
D 4804
Zinc Yellow (Zinc Chromate) Pigments
Determination of low surface Area of Catalysts by
Multipoint Krypton Adsorption
Mechanically Tapped Packing Density of Fine Catalyst
Particles and Catalyst Carrier Particles
Palladium in /molecular Sieve Catalyst by Wet
Chemistry
Resistance of Adhesive Preparations in Container to
Attack by Bacteria, Yeasts and Fungi
Stitch Tear Strength Single Hole
Continuity Verification of Liquid or Sheet Linings
Applied to Concrete Substrates
Detecting Delaminations in Bridge Decks Using
Infrared Thermography
Solution Color of Bisphenol A (4,4Isopropylidenediphenol)
Aromatic Hydrocarbons and Related Chemicals
Standard Test Method for Potential Expansion of
Aggregates from Hydration Reactions
Sequential Batch Extraction of Waste with Water
Determination of Ethoxyl or Hydroxyethoxyl
Substitution in Cellulose Ether Products by Gas
Chromatography
Flat Practicles, Elongated Particles, or Flat and
Elongated Particles in Coarse Aggregate
Chemical and Gravimetric Analysis of White and
Yellow Thermoplastic Marking Containing Lead
Chromate and Titanium Dioxide
Accelerated Weathering Test Conditions and Procedures
for Bituminous Materials (Xenon-Arc Method)
Guide for Classifying and Specifying Adhesives
Standard Specification for Automotive Spark-Ignition
Engine Fuel
Test Method for Ash from Petroleum Products
Accelerated Weathering Test Conditions and Procedures
for Bituminuos Materials (Fluorescent UV and
Condensation Method)
Sampling and Testing of Flaked Aluminium Powders
Pastes
Polyethylene Sheeting in Thickness of 0.25 mm (0.010
in.) and Greater
Poly(Methyl Methacrylate) Acrylic Plastic Sheet
Predicting Heat Buildup in PVC Building Products
Determining the Flammability Characteristics of
Nonrigid Solid Plastics
D 4805
D 4806
D 4807
D 4808
D 4809
D 4810
D 4811
D 4812
D 4815
D 4817
D 4821
D 4816
D 4818
D 4819
D 4820
D 4823
D 4822
D 4824
D 4825
D 4826
D 4827
D 4828
D 4829
D 483
D 4830
Plastic Standards
Specification for Denatured Fuel Ethanol for Blending
with Gasolines for Use as Automotive Spark-Ignition
Engine Fuel
Sediment in Crude Oil by Membrane Filtration
Hydrogen Content of Light Distilates, Middle
Distillates, Gas Oils, and Rsidue by Low-Resolution
Nuclear Magnetic Resonance Spectroscopy
Standard Test Method for Heat of Combustion of Liquid
Hydrocarbon Fuels by Bomb Calorimeter (Precision
Method)
Test Method for Hydrogen Sulfide in Natural Gas Using
Length-of-Stain Detector Tubes
Nonvulcanized Rubber Sheet Used as Roof Flashing
Unnotched Cantilever Beam Impact Strength of Plastics
Test Method for Determination of MTBE, ETBE,
TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4
Alcohols in Gasoline by Gas Chromatography
Rubber Compounding Materials--Stearic Acid
Guide for Carbon Black-Validation of Test Method
Precision and Bias
Specification Heat of Aircraft Turbine Fuels by
Thermal Analysis
Rubber Compounding Materials--Vulcanization
Accelerators
Flexible Cellular Materials Made From Polyolefin
Plastics
Carbon Black-Surface Area by Multipoint B.E.T.
Nitrogen Adsorption
Guide for Core Sampling Submerged, Unconsolidated
Sediments
Guide for Selection of Methods of Particle Size Analysis
of Fluvial Sediments (Manual Methods)
Determination of Catalyst Acidity by Ammonia
Chemisorption
Measurement of Curl in Cut-Sized Office Paper
Units of Measurement and Conversion Factors for Pulp,
Paper and Paperboard
Determining the Unreacted Monomer Content of
Latexes Using Capillary Column Gas Chromatography
Practical Washability of Organic Coatings
Expansion Index of Soils
Standard Test Method for Unsulfonated Residue of
Petroleum Plant Spray Oils
Characterizing Thermoplastic Fabrics Used in Roofing
and Waterproofing
D 4831
D 4832
D 4836
D 4838
D 4833
D 4834
D 4837
D 4841
D 4842
D 4835
D 4839
D 4843
D 4844
D 4846
D 4848
D 4850
D 4851
D 4845
D 4847
D 4852
D 4853
D 4854
D 4855
D 4856
D 4857
D 4858
D 4859
D 4871
Buckle Tear Strength of Leather
Preparation and Testing of Controlled Low Strength
Material (CLSM) Test Cylinders
Specification for Dipropylene Glycol Monomethyl Ether
Determining the Relative Tinting Strength of Chromatic
Paints
Index Puncture Resistance of Geotextiles,
Geomembranes, and Related Products
Detection of Lead in Paint by Direct Aspiration Atomic
Absorption Spectroscopy
Propylene Glycol Monomethyl Ether
Estimation of Holding Time for Water Samples
Containing Organic and Inorganic Constituents
Standard Test Method for Determining the Resistance of
Solid Wastes to Freezing and Thawing
Propylene Glycol Monomethyl Ether Acetate
Total Carbon and Organic Carbon in Water by
Ultraviolet, or Persulfate Oxidation, or Both, and
Infrared Detection
Wetting and Drying Test of Solid Wastes
Air Monitoring at Waste Management Facilities for
Worker Protection
Resistance to Unsnapping of Snap Fasteners
Force, Deformation and Related Properties of Textiles
Terminology Relating to Fabric
Coated and Laminated Fabrics for Architectural Use
Wool
Woven Awning and Canopy Fabrics
Evaluation of Attached Upholstery Fabrics
Reducing Test Variability
Standard Guide for Estimating the Magnitude of
Variability from Expected Sources in Sampling Plans
Comparing Test Methods
Determination of Sulfuric Acid Mist in the Workplace
Atmosphere (Ion Chromatographic
Standard Test Method for Determination of the Ability
of Lubricants to Minimize Ring Sticking and Piston
Deposits in Two-Stroke-Cycle Gasoline Engines Other
Than Outboards
Determination of the Tendency of Lubricants to
Promote Preignition in Two- Stroke-Cycle Gasoline
Engines
Lubricants for Two-Stroke-Cycle Spark- Ignition
Gasoline Engines-TC
Guide for Universal Oxidation/Thermal Stability Test
D 4879
D 4860
D 4861
D 4863
D 4864
D 4868
D 4865
D 4866
D 4867/D 4867M
D 4869
D 4870
D 4872
D 4873
D 4874
D 4875
D 4876
D 4877
D 4878
D 4880
D 4881
D 4882
Apparatus
Geotechnical Mapping of Large Underground Openings
in Rock
Standard Test Method for Free Water and Particulate
Contamination in Mid-Distillate Fuels (Clear and Bright
Numerical Rating
Practice for Sampling and Selection of Analytical
Techniques for Pesticides and Polychlorinated
Biphenyls in Air
Standard Test Method for Determination of Lubricity of
Two-Stroke-Cycle Gasoline Engine Lubricants
Standard Test Method for Determination of Traces of
Methanol in Propylene Concentrates by Gas
Chromatography
Standard Test Method for Estimation of Net and Gross
Heat of Combustion of Burner and Diesel Fuels
Generation and Dissipation of Static Electricity in
Petroleum Fuel Systems
Coal Tar Pitch Emulsion Pavement Sealer Mix
Formulations Containing Mineral Aggregates and
Optional
Effect of Moisture on Asphalt Concrete Paving Mixtures
Asphalt-Saturated Organic Felt Shingle Underlayment
Used in Roofing
Detrmination of Total Sediment in Residual Fuels
Dielectric Testing of Wire and Cable Filling
Compounds
Standard Guide for Identification, Storage, and Handling
of Geosynthetic Rolls and Samples
Standard Test Method for Leaching Solid Material in a
Column Apparatus
Test Methods of Polyurethane Raw Materials:
Determination of the Polymerized Ethylene Oxide
Content of Polyether Polyols
Polyurethane Raw Materials: Determination of Acidity
of Crude or Modified Isocyanates
Polyurethane Raw Materials: Determination of APHA
Color in Isocyanates
Polyurethane Raw Materials: Determination of
Viscosity of Polyols
Salt Water Proofness of Insulating Varnishes Over
Enamelled Magnet Wire
Thermal Endurance of Varnished-Fibrous or FilmWrapped Magnet Wire
Bond Strength of Electrical Insulating Varnishes by the
Twisted-Coil Test
D 4883
D 4892
D 4893
D 4910
D 4923
D 4884
D 4887
D 4888
D 4889
D 4890
D 4894
D 4885
D 4886
D 4891
D 4895
D 4896
D 4897
D 4898
D 4899
D 49
D 490
D 4900
D 4901
D 4902
D 4903
D 4904
D 4905
Density of Polyethylene by the Ultrasound Technique
Test Method for Density of Solid Pitch (Helium
Pycnometer Method)
Test Method for Determination of Pitch Volatility
Tables of Body Measurements for Infants, Sizes 0 to 24
Standard Specification for Reinforced Thermosetting
Plastic Poles
Strength of Sewn or Thermally Bonded Seams of
Geotextiles
Preparation of Viscosity Blends for Hot Recycled
Bituminous Materials
Test Method for Water Vapor in Natural Gas Using
Length-of-Stain Detector Tubes
Polyurethane Raw Materials: Determination of
Viscosity of Crude of Modified Isocyanates
Polyurethane Raw Materials: Determination of Gardner
and APHA Color of Polyols
Polytetrafluoroethylene (PTFE) Granular Molding and
Ram Extrusion Materials
Determining Performance Strength of Geomembranes
by the Wide Strip Tensile Method
Abrasion Resistance of Geotextile System Clogging
Potential (By the Gradient Ratio)
Heating Value of Gases in Natural Gas Range by
Stoichiometric Combustion
Polytetrafluoroethylene (PTFE) Resins Produced from
Dispersion
Standard Guide for Use of Adhesive-Bonded Single
Lap-Joint Specimen Test Results
Asphalt-Coated Glass-Fiber Venting Base Sheet Used in
Roofing
Insoluble ConTamination of Hydraulic Fluids by
Gravimetric Analysis (formerly designation F313)
Analysis of Vegetable Tanning Materials-General
Chemical Analysis of Red Lead
Road Tar
Lignosulfonates (Sulfite Cellulose) in Tanning Extracts
Preparation of Solution of Liquid Vegetable Tanning
Extracts
Evaporation and Drying Analytical Solution
Total Solids and Water in Vegetable Tanning Material
Extracts
Cooling of Analytical Solutions
Preparation of Solution of Solid, Pasty and Powdered
Vegetable Tannin Extracts
D 4906
D 4907
D 4913
D 4915
D 4916
D 4911
D 4912
D 4914
D 4917
D 4918
D 4919
D 4920
D 4921
D 4922
D 4924
D 4926
D 4927
D 4928
D 4929
D 4931
D 4941
D 4930
D 4932
D 4933
D 4934
Total Solids and Ash Content in Leather Finishing
Materials
Nitrocellulose in Finish on Leather
Standard Practice for Determining Concentration of
Hydrogen Sulfide by Direct Reading, Length of Stain,
Visual Chemical Detectors
Manual Sampling of Coal from Tops of Railroad Cars
Mechanical Auger Sampling
Man-Made Yarns Spun on the Parallel Worsted or
Modified Worsted System
Fabric Stability of Vinyl-Coated Glass Yarn Insect
Screening and Louver Cloth
Density of Soil and Rock in Place by the Sand
Replacement Method in a Test Pit
Coefficient of Static and Kinetic of Uncoated Writing
and Printing Paper by Use of the Horizontal Plane
Method
Coefficient of Static Friction of Uncoated Writing and
Printing Paper by Use of the Inclined Plane Method
Testing of Hazardous Materials Packagings
Moisture in Textiles
Test Method for Foaming Tendencies of Engine
Coolants at Room Temperature
Determination of Radioactive Iron in Water
Petroleum Waxes for Use in Rubber Compounding
Gamma Alumina Content in Catalysts Containing Silica
and Alumina by X-Ray Powder Diffraction
Elemental Analysis of Lubricant and Additive
Components-Barium, Calcium, Phosphorus, Sulfur, and
Zinc by Wavelength-Dispersive X-Ray Fluorescence
Spectroscopy
Standard Test Methods for Water in Crude Oils by
Coulometric Karl Fischer Titration
Determination of Organic Chloride Content in Crude Oil
Gross Moisture in Green Petroleum Coke
Practice for Preparing Drawdowns of Artists' Paste
Paints
Dust Control Material on Calcined Petroleum Coke
Standard Test Method for Fastener Rupture and Tear
Resistance of Roofing and Waterproofing Sheets, Roll
Roofing, and Shingle
Moisture Conditioning of Wood and Wood-Base
Materials
Rubber Compounding Materials: 2-Benzothiazyl
Sulfenamide Accelerators--Insolubles
D 4944
D 4946
D 4948
D 4935
D 4936
D 4937
D 4938
D 4939
D 494
D 4940
D 4942
D 4949
D 495
D 4950
D 4960
D 4968
D 4972
D 4975
D 4951
D 4952
D 4953
D 4954
D 4955
D 4956
D 4958
D 496
Field Determination of Water [Moisture] Content of Soil
by the Calcium Carbide Gas Pressure Tester Method
Blocking Resistance of Architectural Paints
Test Method for Determination of the Upper Layer
Separated from a Viscous Liquid
Measuring the Electromagnetic Shielding Effectiveness
of Planar Materials
Mercaptobenzothiazole Sulfenamide Assay by
Reduction/Titration
p-Phenylenediamine Antidegradants Purity by Gas
Chromatography
Erosion Testing of Antifouling Paints Using High
Velocity Water
Subjecting Marine Antifouling Coating to Biofouling
and Fluid Shear Forces in Natural Seawater
Acetone Extraction of Phenolic Molded or Laminated
Products
Conductimetric Analysis of Water Soluble Ionic
Contamination of Blasting Abrasives
Water Pickup of Lithographic Printing Inks and
Vehicles in a Laboratory Mixer
Determination of D-C Resistivity of Writing Paper
(Keithley Method)
High-Voltage, Low-Current, Dry Arc Resistance of
Solid Electrical Insulation
Automotive Service Greases
Evaluation of Color for Thermoplastic Traffic Marking
Materials
Guide for Annual Review of Test Methods and
Specifications for Plastics
Standard Test Method for pH of Soils
Single-Filament Tire Bead Wire Made from Steel
Determination of Additive Elements in Lubricating Oils
by Inductively Coupled Plasma Atomic Emission
Spectrometry
Qualitative Analysis for Active Sulfur Species in Fuels
and Solvents (Doctor Test)
Vapor Pressure of Gasoline and Gasoline-Oxygenate
Blends (Dry Method)
Determination of Nitrilotriatates in Detergents
Evaluation of Automotive Polish
Standard Specification for Retroreflective Sheeting for
Traffic Control
Comparison of the Brush Drag of Latex Paints
Chip Soap
D 4957
D 4959
D 5046
D 5067
D 5069
D 4961
D 4962
D 4963
D 4964
D 4965
D 4966
D 4967
D 4969
D 497
D 4970
D 5071
D 5192
D 5193/D 5193M
D 5196
D 4971
D 4974
D 4976
D 4977
D 4978
D 4979
D 498
D 4980
D 4981
D 4982
Apparent Viscosity of Asphalt Emulsion Residues and
Non-Newtonian Bitumens by Vacuum Capillary
Viscometer
Test Method for Determination of Water [Moisture]
Content of Soil by Direct Heating Method
Fully Crosslinked Elastomeric Alloys (FCEAs)
Artists' Watercolor Paints
Preparation of Paint-Roller Covers for Evaluation
Gas Chromatographic Analysis of Major Organic
Impurities in Phenol Produced by the Cumene Process
NaI (TI) Gamma-Ray Spectrometry of Water
Ignition Loss of Glass Strands and Fabrics
Tension and Elongation of Elastic Fabrics (ConstantRate-of-Extension Type Tensile Testing Machine)
Seams and Seam Finishes Used in Home Sewing
Abrasion Resistance of Textile Fabrics (Martindale
Abrasion Tester Method)
Standard Specification for Polyethylene Plastics
Molding and Extrusion Materials
PTFE Coated Glass Fabric
Ordinary Laundry Bar Soap
Test Method for Pilling Resistance and Other Related
Surface Changes of Textile Fabrics: Martindale Tester
Practice for Exposure of Photodegradable Plastics in a
Xenon Arc Apparatus
Collection of Coal Samples from Core
Coated Fabrics--Air Retention
Guide for Biomedical Grade Water
Test Method for Determining the In Situ Modulus of
Deformation of Rock Using the Diametrically Loaded
76-mm (3-in.) Borehole Jack
Test Method for Hot Air Thermal Shrinkage of Yarn and
Cord Using a Thermal Shrinkage Oven
Standard Specification for Polyethylene Plastics
Molding and Extrusion Materials
Standard Specification for Polyethylene Plastics
Molding and Extrusion Materials
Standard Test Methods for Screening of Reactive
Sulfides in Waste
Physical Description Screening Analysis in Waste
Powdered Soap (Nonalkaline Soap Powder)
Screening of pH in Waste
Screening of Oxidizers in Waste
Standard Test Methods for Flammability Potential
Screening Analysis of Waste
D 4983
D 4992
D 5010
D 5018
D 4984
D 4985
D 4986
D 4987
D 4988
D 4989
D 499
D 4990
D 4991
D 4993
D 4994
D 4995
D 4998
D5
D 50
D 500
D 5000
D 5001
D 5002
D 5003
D 5004
Cyclohexylamine, Morpholine, and
Diethylaminoethanol in Water and Condensed Steam by
Direct Aqueous Injection Gas Chromatography
Evaluation of Rock to be Used for Erosion Control
Guide for Testing Printing Inks and Related Materials
Test Method for Shear Viscosity of Coal-Tar and
Petroleum Pitches
Test Method for Carbon Dioxide in Natural Gas Using
Length-of-Stain Detector Tubes
Specification for Low Silicate Ethylene Glycol Base
Engine Coolant for Heavy Duty Engines Requiring a
Pre-Charge of Supplemental Coolant Additive (SCA)
Horizontal Burning Characteristics of Cellular
Polymeric Materials
Tensile Breaking Strength of Perforations in One-Part
Continuous Form Paper
Determination of Alkalinity of Paper as Calcium
Carbonate (Alkaline Reserve of Paper)
Apparent Viscosity (Flow) of Roofing Bitumens Using
the Parallel Plate Plastomer
White Floating Toilet Soap
Coal Tar Glass Felt Used in Roofing and Waterproofing
Test Method for Leakage Testing of Empty Rigid
Containers by Vacuum Method
Practice for Calculation and Adjustment of Silica (SiO2)
Scaling for Reverse Osmosis
Recovery of Viruses from Wastewater Sludges
Electronic and Degreasing Grades of 1,1,2-Trichloro
1,2,2-Trifluoroethane Solvent
Evaluation of Wear Characteristics of Tractor Hydraulic
Fluids
Penetration of Bituminous Materials
Chemecal Analysis of Yellow, Orange, Red, and Brown
Pigments Containing Iron and Manganese
Chemical Analysis of Sulfonated Oils
Standard Practice for Evaluating Activity of Clay
Elements Using a Side-Stream Sensor
Standard Test Method for Measurement of Lubricity of
Aviation Turbine Fuels by the Ball-on-Cylinder
Lubricity Evaluator (BO
Dencity and Relative Dencity of Crude Oils Digital
Analyzer
Hardgrove Index (HGI) of Petroleum Coke
Real Dencity of Calcined Petroleum Coke by Xylene
Displacement
D 5006
D 5007
D 5008
D 5009
D 501
D 5011
D 5012
D 5013
D 5014
D 5015
D 5016
D 5017
D 5019
D 502
D 5021
D 5029
D 5039
D 5041
D 3811/D 3811M
D 5022
D 5023
D 5024
D 5025
D 5026
Measurement of Fuel System Icing Inhibitors (Ether
Type) in Aviation Fuels
Wet-to-Dry Hiding Change
Standard Test Method for Ethyl Methyl Pentanol
Content and Purity Value of 2-Ethylhexanol By Gas
Chromatography
Evaluating and Comparing Transfer Efficiency of Spray
Applied Coatings Under Laboratory Conditions
Sampling and Chemical Analysis of Alkaline Detergents
Calibration of Ozone Monitors Using Transfer
Standards
Preparation of Materials Used ro the Collection and
Preservation of Atmospheric Wet Deposition
Sampling Wastes from Pipes and Other Point
Discharges
Measurement of Formaldehyde in Indoor Air (Passive
Sampler Methodology)
pH of Atmospheric Wet Deposition of Samples by
Electrometric Determination
Sulfur in Ash from Coal, Coke, and Residues from Coal
Combustion Using High-Temperature Tube Furnace
Combustion Method with Infrared Absorption
Determination of Linear Low Density Polyethylene
(LLDPE) Composition by Carbon-13 Nuclear Magnetic
Resonance
Reinforced Non-Vulcanized Polymeric Sheet Used in
Roofing Membrane
Particle Size of Soaps and Other Detergents
Standard Specification for Thermoplastic ElastomerChlorinated Ethylene Alloy (TECEA)
Water Solubles in Activated Carbon
Identification of Wire Side of Paper
Fracture Strength in Cleavage of Adhesives in Bonded
Joints
Standard Test Method for Unwind Force of PressureSensitive Tapes
Identification of Vials and Ampoules Containing
Concentrated Solutions of Drugs to be Diluted Before
Use
Measuring the Dynamic Mechanical Properties of
Plastics Using Three Point Bending
Measuring the Dynamic Mechanical Properties of
Plastics in Compression
Laboratory Burner Used for Small-Scale Burning Tests
in Plastic Materials
Measuring the Dynamic Mechanical Properties of
D 5028
D 5030
D 5031
D 5032
D 5033
D 5034
D 5035
D 5036
D 5037
D 5038
D 5040
D 5042
D 5047
D 5052
D 5059
D 5063
D 5053
D 5044
D 5045
D 5048
D 5050
D 5051
D 5054
D 5055
Plastics in Tension
Curing Properties of Pultrusion Resins by Thermal
Analysis
Standard Test Method for Density of Soil and Rock in
Place by the Water Replacement Method in a Test Pit
Conducting Tests on Paints and Related Coatings and
Materials Using Enclosed Carbon-Arc Light and Water
Exposure Apparatus
Maintaining Constant Relative Humidity by Means of
Aqueous Glycerin Solutions
Development of Standards Relating to the Proper Use of
Recycled Plastics
Breaking Force and Elongation of Textile Fabrics (Grab
Test)
Breaking Force and Elongation of Textile Fabrics (Strip
Test)
Application of Fully Adhered Single-Ply Poly(Vinyl
Chloride) Roof Sheeting
Comparison of Waterborne Petroleum Oils by High
Performance Liquid Chromatography
Textile Conversation
Ash Content od Adhesives
Test Method for Estimating the Organic Fouling of
Particulate Anion Exchange Resins
Polyethylene Terephthalate Film and Sheeting
Standard Test Method for Permeability of Leather to
Water Vapor
Lead in Gasoline by X-Ray Spectroscopy
Certification of Coating Conformance Form
Resistance to Crocking of Leather
Rubber Chemicals--Free 2-Mercaptobenzothiazole
(MBT) in Benzothiazyl Disulfide (MBTS)
Plane-Strain Fracture Toughness and Strain Energy
Release Rate of Plastic Materials
Measuring the Comparative Burning Characteristics and
Resistance to Burn-Through of Solid Plastics Unsing a
125-mm Flame
Commercial Use of Lime Kiln Dusts and Portland
Cement Kiln Dusts
Rubber Chemicals--Benzothiazyl Disulfide (MBTS)-Assay
Standard Test Method for Rubber Chemicals - Diphenyl
Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG)
Assay
Standard Specification for Establishing and Monitoring
Structural Capacities of Prefabricated Wood I-Joists
D 5056
D 5057
D 5058
D 5060
D 5061
D 5062
D 5064
D 5065
D 5066
D 5068
D 5070
D 5072
D 5073
D 5075
D 5081
D 5098
D 5100
D 5074
D 5076
D 5077
D 5078
D 5079
D 5080
D 5083
D 5084
D 5085
Trace Metals in Petroleum Coke by Atomic Absorption
Standard Test Method for Screening Apparent Specific
Gravity and Bulk Density of Waste
Standard Test Methods for Compatibility of Screening
Analysis of Waste
Test Method for Determining Impurities in High-Purity
Ethylbenzene by Gas Chromatography
Microscopical Determination of Volume Percent of
Textural Components in Metallurgical Coke
Resin Solution Dilutability by Volumetric/Gravimetric
Determination
Standard Practice for Conducting a Patch Test to Assess
Coating Compatibility
Assessing the Condition of Aged Coatings on Steel
Surfaces
Standard Test Method for Determination of the Transfer
Efficiency Under Production Conditions for Spray
Application of Automotive Pai
Preparation of Paint Brushes for Evaluation
Synthetic Quaternary Ammonium Salts in Fabric
Softeners by Potentiometric Titrations
Radon in Drinking Water
Depth Measurement of Surface Water
Standard Test Method for Nicotine and 3Ethenylpyridine in Indoor Air
Aggregate Layer Hiding Power
Artists' Acrylic Emulsion Paints
Test Method for Adhesion of Mineral Aggregate to Hot
Bitumen
Practice for Preparation of Natural-Matrix Sediment
Reference Samples for Major and Trace Inorganic
Constituents Analysis by Partial Extraction Procedures
Standard Test Method for Measuring Voids in Roofing
and Waterproofing Membranes
Electrostatic Discharge (ESD) Packaging Materials
Crack Filler, Hot-Applied, for Asphalt Concrete and
Portland Cement Concrete Pavements
Preserving and Transporting Rock Core Samples
Rapid Determination of Percent Compaction
Tensile Properties of Reinforced Thermosetting Plastics
Using Straight-Sided Specimens
Standard Test Methods for Measurement of Hydraulic
Conductivity of Saturated Porous Materials Using a
Flexible Wall Permeameter
Determination of Chloride, Nitrate, and Sulfate in
D 5104
D 5127
D 5171
D 5086
D 5087
D 5088
D 5089
D 509
D 5090
D 5091
D 5092
D 5097
D 5099
D 5093
D 5094
D 5095
D 5096
D 5101
D 5102
D 5103
D 5105
D 5106
Atmospheric Wet Deposition Chemically Suppressed
Ion Chromatography
Shrinkage of Textile Fibers (Single-Fiber Test)
Ultra Pure Water Used in the Electronics and
Semiconductor Industry
Test Method for Impact Resistance of Plastic SewThrough Flange Buttons
Standard Test Method for Determination of Calcium,
Magnesium, Potassium, and Sodium in Atmospheric
Wet Deposition by Flame Atomic Absorption
Spectropho
Determining Amount of Volatile Organic Compound
(VOC) Released from Automotive Coatings and
Available for Abatement
Decontamination of Field Equipment Used at
Nonradioactive Waste Sites
Test Method for Velocity Measurements of Water in
Open Channels with Electromagnetic Current Meters
Sampling and Grading Rosin
Standard Practice for Standardizing Ultrafiltration
Permeate Flow Performance Data
Water Analysis for Electrodialysis/Electrodialysis
Reversal Applications
Design and Installation of Ground Water Monitoring
Wells in Aquifers
Filter-Retained Solids Content of Polymer Latexes
Rubber--Measurement of Processing Properties Using
Capillary Rheometry
Field Measurement of Infiltration Rate Using a DoubleRing Infiltrometer with a Sealed-Inner Ring
Gross Leakage of Liquids from Containers with
Threaded or Lug-Style Closures
Determination of the Nonvolatile Content in Silances,
Silioxanes and Silane-Siloxane Blends Used in Masonry
Water Repellent Treatments
Determining the Performance of a Cup Anemometer or
Propeller Anemometer
Measuring the Soil-Geotextile System Clogging
Potential by the Gradient Ratio
Unconfined Compressive Strength of Compacted SoilLime Mixtures
Length and Length Distribution of Man-Made Staple
Fibers (Single-Fiber Test)
Perfoming Accelerated Outdoor Weathering of PressureSensitivie Tapes Using Concentrated Natural Sunlight
Steel Slag Aggregates for Bituminous Paving Mixtures
D 511
D 5112
D 512
D 5107
D 5108
D 5109
D 5110
D 5111
D 5113
D 5118/D 5118M
D 5119
D 5121
D 5114
D 5115
D 5116
D 5117
D 5120
D 5124
D 5125
D 5126
D 5128
D 5129
D 513
D 5136
D 5138
D 5130
D 5131
Calcium and Magnesium in Water
Vibration (Horizontal Linear Motion) Test of Products
Test Methods for Chloride Ion In Water
Preparatory Surface Cleaning of Architectural Sandstone
Organotin Release Rates of Antifouling Coating
Systems in Sea Water
Copper-Clad Thermosetting Laminates for Printed
Wiring Boars
Cailbration in Ozone Monitors and Cerification of
Ozone Transfer Standards Using Ultarviolet Photometry
Choosing Locations and Sampling Methods to Monitor
Atmospheric Deposition at Non-Urban Locations
Determining Adhesive Attack on Rigid Cellular
Polystyrene Foam
Fabrication of Fiberboard Shipping Boxes
Standard Test Method for Evaluation of Automotive
Engine Oils in the CRC L-38 Spark-Ignition Engine
Practice for Preparation of Rock Slabs for Durability
Testing
Laboratory Froth Flotation of Coal in a Mechanical Cell
Collecting Gross Samples and Determining the Fuel
Quality of RDF
Small-Scale Environmental Chamber Determinations of
Organic Emissions from Indoor Materials/Products
Dye Penetration of Solid Fiberglass Reinforced
Pultruded Stock
Inhibition of Respiration in Microbial Cultures in the
Activated Sludge Process
Standard Practice for Testing and Use of a Random
Number Generator in Lumber and Wood Products
Simulation
Viscosity of Paints and Related Materials by ISO Flow
Cups
Comparison of Field Methods for Determining
Hydraulic Conductivity in the Vadose Zone
Test Method for On-Line pH Measurement of Water of
Low Conductivity
Test Method for Open Channel Flow Measurement of
Water Indirectly by Using Width Contractions
total and Dissolved Carbon Dioxide in Water
Specification for High Purity p-Xylene
Specification for Liquid Crystal Polymers
Test Method for Open-Channel Flow Measurement of
Water Indirectly by Slope-Area Method
Standard Guide for Record Keeping for
D 5132
D 5133
D 5134
D 5135
D 5137
D 5141
D 5144
D 5146
D 5170
D 5142
D 5139
D 5140
D 5143
D 5145
D 5147
D 5148
D 5149
D 5150
D 5151
D 5153
D 5154
D 5155
D 5156
D 5157
Electrodialysis/Electrodialysis Reversal Systems
Horizontal Burning Rate of Flexible Cellular and
Rubber Materials Used In Occupant Compartments of
Motor Vehicles
Low Temperature, Low Shear Rate , Viscosity/
Temperature Dependence of Lubricating Oils Using a
Temperature-Scanning Technique
Detailed Analysis of Petroleum Naphthas through nNonane by Capillary Gas Chromatography
Analysis of Styrene by Capillary Gas Chromatography
Hexyl Acetate
Test Method for Determining Filtering Efficiency and
Flow Rate of a Geotextile for Silt Fence Application
Using Site-Specific Soil
Guide for Use of Protective Coating Standards in
Nuclear Power Plants
Testing Solvent-Borne Architectural Coatings
Peel Strength ("T" Method) of Hook and Loop Touch
Fasteners
Proximate Analysis of the Analysis Samples of Coal and
Coke by Instrumental Procedures
Sample Preparation for Qualification Testing of
Coatings to be Used in Nuclear Power Plants
Testing Polyurethane "Poured in Place" Thermal Break
Materials
Analysis of Nitroaromatic and Nitramine Explosive in
Soil By High Performance Liquid Chromatography
Nonvolatile and Pigment Content of Electrocoat Baths
Sampling and Testing Modified Bituminous Sheet
Material
Centrifuge Kerosine Equivalent
Ozone in the Atmosphere: Continuous Measurement by
Ethylene Chemiluminescence
Hiding Power of Architectural Paints Applied by Roller
Detection of Holes in Medical Gloves
Palladium in Molecular Sieve Catalyst by Atomic
Absorption
Determining Activity and Selectivity of Fluid Catalytic
Cracking (FCC) Catalysts by Microactivity Test
Polyurethane Raw Materials: Determination of the
Isocyanate Content of Aromatic Isocyanates
Continuous Measurement of Ozone in Ambient,
Workplace, and Indoor Atmospheric (Ultraviolet
Absorption)
Statistical Evaluation of Indoor Air Quality Models
D 5158
D 5159
D 516
D 5160
D 5162
D 5164
D 5161
D 5163
D 5166
D 5167
D 5168
D 5169
D 517
D 5172
D 5173
D 5174
D 518
D 5180
D 5182
D 5175
D 5176
D 5177
D 5178
D 5179
D 5181
Determination of the Particle Size of Powdered
Activated Carbon by Air Jet Sieving
Dusting Attrition of Granular Activated Carbon
Sulfate Ion in Water
Gas-Phase Adsorption Testing of Activated Carbon
Practice for Discontinuity (Holiday) Testing of
Nonconductive Protective Coating on Metallic
Substrates
Standard Specification for Propylene Glycol and
Dipropylene Glycol
Specifying Inspection Requirements for Coating and
Lining Work (Metal Substrates)
Establishing Procedures to Monitor the Performance of
Safety Related Coatings in an Operating Nuclear Power
Nuclear Power Plant
Laboratory Preparation of Gelled Vehicle Samples
Using a Microwave Oven
Melting of Hot-Applied Joint and Crack Sealant and
Filler for Evaluation
Fabrication and Closure of Triple Wall Corrugated
Fiberboard Containers
Shear Strength (Dynamic Method) of Hook and Loop
Touch Fasteners
Asphalt Plank
Guide for Documenting the Standard Operating
Procedures Used for the Analysis of Water
Standard Test Method for On-Line Monitoring of
Carbon Compounds in Water by Chemical Oxidation,
by UV Light Oxidation, by Both
Trace Uranium in Water by Pulsed-Laser
Phosphorimetry
Test Method for Rubber Deterioration - Surface
Cracking
Quantitative Test for Turbidity in Clear Liquids
Evaluating the Scuffing Load Capacity of Oils (FZG
Visual Method)
Organohalide Pesticides and Polychlorinated Biphenyls
in Water by Microextraction and Gas Chromatography
Total Chemically Bound Nitrogen in Water by Pyrolysis
and Chemiluminescence Detection
Waste Acceptance at Hazardous Waste Incinerators
Mar Resistance of Organic Coatings
Measuring Adhesion of Organic Coatings to Plastic
Substrates by Direct Tensile Testing
Abrasion Resistance of Printed Matter by the GA-CAT
Comprehensive Abrasion
D 5183
D 519
D 5190
D 5188
D 5191
D 5184
D 5185
D 5186
D 5187
D 5194
D 5195
D 5197
D 5198
D 5200
D 5211
D 5219
D 5223
D 5230/D 5230M
D 5201
D 5202
D 5203
D 5204
D 5205
Test Method for Determination of the Coefficient of
Friction of Lubricants Using the Four-Ball Wear Test
Machine
Standard Test Method for Length of Fiber in Wool Top
Vapor Pressure of Petroleum Products (Automatic
Method)
Vapor-Liquid Ratio Temperature Determination of Fuels
(Evacuated Chamber Method)
Vapor Pressure of Petroleum Products (Mini Method)
Standard Test Methods for Determination of Aluminum
and Silicon in Fuel Oils by Ashing, Fusion, Inductively
Coupled Plasma Atomic Emission Spectrometry, and
Atomic Absorpt
Determination of Additive Elements, Wear Metals and
Contaminants in Used Lubricating Oils and
Determination of Selected Elements in Base Oils by
Inductively Coupled Plasma Atomic Emission
Spectrometry
Determination of the Aromatic Content and Polynuclear
Aromatic Content of Diesel Fuels and Aviation Turbine
Fuels By Supercritical Fluid Chromatography
Crystallite Size (lL2) of Calcined Petroleum Coke by XRay Diffraction
Standard Test Method for Trace Chloride in Liquid
Aromatic Hydrocarbons
Density of Soil and Rock In-Place at Depths Below the
Surface by Nuclear Methods
Determination of Formaldehyde and Other Carbonyl
Compounds in Air (Active Sample Methodology)
Nitric Acid Digestion of Solid Waste
Determination of Weight Percent Volatile Content of
Solvent-Borne Paints in Aerosol Cans
Specification for Xylenes for p-Xylene Feedstock
Relating to Body Dimensions for Apparel Sizing
Engine Coolant Grade Propylene Glycol
Carbon Black -- Automated Individual Pellet Crush
Strength
Standard Practice for Calculating Formulation Physical
Constants of Paints and Coatings
Determining Triaxial Compression in Creep Strength of
Chemical Grouted Soils
Polyethylene Plastics Molding and Extrusion Materials
From Recycled Post-Consumer (HDPE) Sources
Polyamide-Imide (PAI) Molding and Extrusion
Materials
Polyetherimide (PEI) Materials
D 5206
D 5207
D 5209
D 521
D 1644
D 5208
D 5251
D 5252
D 5257
D 5210
D 5212
D 5213
D 5215
D 5216
D 5217
D 5220
D 5222
D 5224
D 5225
D 5226
D 5456
D 5496
D 5684
D 5831
D 5227
Windload Resistance of Rigid Poly(Vinyl Chloride)
(PVC) Siding
Calibration of 20 and 125 mm Test Flames for SmallScale Burning Tests on Plastic Materials
Standard Test Method for Determining the Aerobic
Biodegradation of Plastic Materials in the Presence of
Municipal Sewage Sludge
Chemcial Analysis of Zinc Dust (Metallic Zinc Powder)
Standard Test Methods for Nonvolatile Content of
Varnishes
Operating Fluorescent Ultraviolet (UV) Condensation
Apparatus for Exposure of Photodegradable Plastics
Operation of the Tetrapod Walker Drum Tester
Operation of the Hexapod Tumble Drum Tester
Dissolved Hexavalent Chromium in Water by Ion
Chromatography
Standard Test Method for Determining the Anaerobic
Biodegradation of Plastic Materials in the Presence of
Municipal Sewage Slu
High Load Rotational Confined Elastomeric Bearings
for Bridges and Structures
Polyimide Resin Film for Electrical Insulation and
Dielectric Applications
Instrumental Evaluation of Staining of Vinyl Flooring
by Adhesives
Propylene Glycol Base Engine Coolant for Automobile
and Light-Duty Service
Guide for Detection of Fouling and Degradation of
Particulate Ion Exchange Materials
Water Content of Soil and Rock In-Place by the Neutron
Depth Probe Method
Standard Specification for High Fire-Point Mineral
Electrical Insulating Oils
Standard Practice for Compression Molding Test
Specimens of Thermosetting Molding Compounds
Measuring Solution Viscosity of Polymers With a
Differential Viscometer
Dissolving Polymer Materials
Specification for Evaluation of Structural Composite
Lumber Products
In Field Immersion Testing of Geosynthetics
Terminology Relating to Pile Floor Coverings
Standard Test Method for Screening Fuels in Soils
Measurement of Hexane Extractable Content of
Polyolefins
D 5228
D 5229/D 5229M
D 523
D 5233
D 5234
D 5239
D 524
D 6540
D 5231
D 5232
D 5235
D 525
D 5250
D 5236
D 5237
D 5238
D 5240
D 5241
D 5242
D 5243
D 5244
D 5245
D 5246
D 5247
D 5248
Standard Test Method for Determination of the Butane
Working Capacity of Activated Carbon
Moisture Absorption Properties and Equilibrium
Conditioning of Polymer Matrix Composite Materials
Specular Gloss
Single Batch Extraction Method for Wastes
Analysis of Ethylene Product
Characterizing Fly Ash for Use in Soil Stabilization
Test Method for Ramsbottom Carbon Residue of
Petroleum Products
Standard Test Method for Accelerated Soiling of Pile
Yarn Floor Covering
Determination of the Composition of Unprocessed
Municipal Solid Waste
Determining the Stability and Miscibility of a Solid,
Semi-Solid, or Liquid Waste Material
Microscopical Measurement of Dry Film Thickness of
Coatings on Wood Products
Test Method for Oxidation Stability of Gasoline
(Induction Period Method)
Specification for Poly(vinyl chloride) Gloves for
Medical Application
Standard Test Method for Distillation of Heavy
Hydrocarbon Mixtures (Vacuum Potstill Method)
Evaluating Fabric Softeners
Smoldering Combustion Potential of Cotton-Based
Batting
Testing Rock Slabs to Evaluate Soundness of Rip Rap
by Use of Sodium Sulfate or Magnesium Sulfate
Micro-Extraction of Water for the Analysis of Volatile
and Semi-Volatile Organic Compounds in Water
Standard Test Method for Open-Channel Flow
Measurement of Water with Thin-Plate Weirs
Standard Test Method for Open-Channel Flow
Measurement of Water Indirectly at Culverts
Recovery of Enteroviruses from Waters
Practice for Cleaning Laboratory Glassware,
Plasticware, and Equipment Used in Microbiological
Analyses
Test Method for Isolation and Enumeration of
Pseudomonas aeruginosa from Water
Determining the Aerobic Biodegradability of
Degradable Plastics by Specific Microorganisms
Standard Specification for Reclaimed 1,1,2-Trichloro
1,2,2-Trifluoroethane
D 5249
D 5253
D 5254
D 5255
D 5256
D 5259
D 5261
D 5258
D 5260
D 5274
D 5276
D 528
D 531
D 5262
D 5263
D 5264
D 5265
D 5266
D 5267
D 5268
D 5269
D 5270
D 5271
D 5310
D 5344
Backer Material for Use With Cold and Hot-Applied
Joint Sealants in Portland-Cement Concrete and Asphalt
Joints
Textile Floor Covering and Textile Upholstered
Furniture
Practice for Minimum Set of Data Elements to Identify a
Ground-Water Site
Standard Practice for Certification of Personnel Engaged
in the Testing of Soil and Rock
Test Method for Relative Efficacy of Dynamic Solvent
Systems for Dissolving Water-Formed Deposits
Standard Test Method for Isolation and Enumeration of
Enterococci from Water by the Membrane Filter
Procedure
Measuring Mass Per Unit Area of Geotextiles
Acid-Extraction of Elements from Sediments Using
Closed Vessel Microwave Heating
Poly(Vinyl Chloride) (PVC) Homopolymer and
Copolymer Compounds and Chlorinated Poly(Vinyl
Chloride) (CPVC) Compounds
Standard Guide for Analysis of 1,3-Butadiene Product
Drop Test of Loaded Containers by Free Fall
Machine Direction of Paper and Paperboard
Standard Test Method for Rubber Property - Pusey and
Jones Indentation
Evaluating the Unconfined Tension Creep Behavior of
Geosynthetics
Determining the Relative Degree of Oxidation in
Bituminous Coal by Alkali Extraction
Abrasion Resistance of Printed Materials by the
Sutherland Rub Tester
Bridge Impact Testing
Estimating the Percentage of Wood Failure in Adhesive
Bonded Joints
Determining of Extrudability of Cartridge Adhesives
Topsoil Used for Landscaping Purposes
Determining Transmissivity of Nonleaker Confined
Aquifers by the Theis Recovery Method
Determining Transmissivity and Storage Coefficient of
Bounded, Nonleaky, Confined Aquifers
Determining the Aerobic Biodegradation of Plastic
Materials in an Activated Sludge WastewaterTreatment-System
Test Method for Tar Acid Composition by Capillary Gas
Chromatography
Test Method for Extension Force of Partially Oriented
D 5388
D 5272
D 5273
D 5280
D 5281
D 5282
D 5286
D 5275
D 5277
D 5278
D 5279
D 5283
D 5284
D 5285
D 5287
D 5288
D 5289
D 529
D 5291
D 5292
D 5293
D 5295
Yarn
Measurement of Discharge by Step-Backwater Method
Outdoor Exposure Testing of Photodegradable Plastics
Analysis of Propylene Concentrates
Standard Practice for Evaluation of Performance
Characteristics of Air Quality Measurement Methods
with Linear Calibration Fun
Collection and Analysis of Hexavalent Chromium in
Ambient Atmospheres
Compatability of Construction Material with Silicone
Fluid Used for Electrical Insulation
Standard Test Methods for Determination of Transfer
Efficiency Under General Production Conditions for
Spray Application of Paints
Fuel Injection Shear Stability Test (FISST) for Polymer
Containing Fluids
Performing Programmed Horizontal Impacts Using an
Inclined Impact
Elongation of Narrow Elastic Fabrics (Static-Load
Testing)
Measuring Dynamic Mechanical Properties of Plastics
in Torsion
Generations of Environmental Data Related to Waste
Management Activities: Quality Assurance and Quality
Control Planning and Implementation
Sequential Batch Extraction of Waste With Acidic
Extraction Fluid
24-Hour Batch-Type Measurement of Volatile Organic
Sorption by Soils and Sediments
Automatic Sampling of Gasous Fuels
Determining the Tracking Index of Electrical Insulating
Materials Using VArious Electrode Materials
(Excluding Platinum)
Rubber Property--Vulcanization Using Rotorless Cure
Meters
Accelerated Weathering Test Conditions and Procedures
for Bituminous Materials (Carbon-Arc-Method)
Instrumental Determination of Carbon, Hydrogen, and
Nitrogen in Petroleum Products and Lubricants
Aromatic Carbon Contents of Hydrogen Oils by High
Resolution Nuclear Magnetic Resonance Spectroscopy
Standard Test Method for Apparent Viscosity of Engine
Oils Between -5 and -35øC Using the Cold-Cranking
Simulator
Standard Guide for Preparation of Concrete Surfaces for
Adhered (Bonded) Membrane Waterproofing Systems
D 5296
D 5297
D 5299
D 5302
D 5304
D 5298
D 5300
D 5301
D 5303
D 5305
D 5306
D 5307
D 5309
D 5311
D 5312
D 5313
D 5314
D 5324
D 5336
D 5343
D 5315
D 5316
D 5317
Molecular Weight Averages and Molecular Weight
Distribution of Polystyrene by High Performance SizeExclusion Chromatography
Standard Test Methods for Rubber Chemical
Accelerator - Purity by High Performance Liquid
Chromatography
Guide for Decommissioning of Ground Water Wells,
Vadose Zone Monitoring Devices, Boreholes, and Other
Devices for Environmental Activities
Standard Test Method for Evaluation of Automotive
Engine Oils for Inhibition of Deposit Formation and
Wear in a Spark-Ignition Internal Combust
Test Method for Assessing Distillate Fuel Storage
Stability by Oxygen Overpressure
Measurement of Soil Potential (Suction) Using Filter
Paper
Measurement of Resin Content and Other Related
Properties of Polymer Matrix Thermoset Prepreg by
Combined Mechanical and Ultrasonic Methods
Physical Characterization of Paint Brushes
Trace Carbonyl Sulfide in Propylene by Gas
Chromatography
Determination of Ethyl Mercaptan in LP-Gas Vapor
Linear Flame Propagation Rate of Lubricating Oils and
Hydraulic Fluids
Determination of Boiling Range Distribution of crude
Petroleum by Gas Chromatography
Cyclohexane 999
Load Controlled Cyclic Triaxial Strength of Soil
Evaluation of Durability of Rock for Erosion Control
Under Freezing and Thawing Conditions
Evaluation of Durability of Rock for Erosion Control
Under Wetting and Drying Conditions
Soil Gas Monitoring in the Vadose Zone
Water-Borne Architectural Coatings
Specification for Polyphthalamide (PPA) Injection
Molding Materials
Evaluating Cleaning Performance of Ceramic Tile
Cleaners
N-Methylcarbamoyloxianes and N-Methylcarbamates in
Water by Direct Aqueous Injection HPLC with PostColumn Derivatization
1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane
in Water by Microextraction and Gas Chromatography
Determination of Chlorinated Organic Acid Compounds
in Water by Gas Chromatography with a Capture
D 5318
D 5320
D 5321
D 5322
D 5319
D 5323
D 5325
D 5326
D 5327
D 5328
D 5329
D 533
D 5330/D 5330M
D 5331
D 5332
D 5333
D 5334
D 5335
D 5337
D 5338
D 5339
D 534
D 5340
D 5342
Detector
Hydrolyzable Chloride in Peroxy Esters and Peroxy
Dicarbonates
Standard Test Methods for Determination of 1,1,1Trichloroethane and Methylene Chloride Content in
Stabilized Trichloroethylene and T
Determining the Coefficient of Soil and Geosynthetic or
Geosynthetic and Geosynthetic Friction by the Direct
Shear Method
Laboratory Immersion Procedures for Evaluating the
Chemical Resistance of Geosynthetic to Liquids
Glass-Fiber Reinforced Polyester Wall and Ceiling
Panels
Practice for Determination of 2 % Secant Modulus for
Polyethylene Geomembranes
Determination of Weight Percent Volatile Content of
Water-Borne Aerosol Paints
Color Development in Tinted Latex Paints
Evaluating and Comparing Transfer Efficiency Under
General Laboratory Conditions
Volatile Organic Compound (VOC40) Content of NonHeatset Paste Printing Ink Systems at 40°C
Sealants and Fillers, Hot-Applied, for Joints and Cracks
in Asphaltic and Portland Cement Concrete Pavements
Built Soap, Powdered
Tape, Pressure-Sensitive, Packaging, FilamentReinforced
Evaluation of Mechanical Handling of Unitized Loads
Secured with Stretch Warp Films
Fiber Length and Length Distribution of Cotton and
Man-Made Staple Fibers
Measurement of Collapse Potential of Soils
Standard Test Method for Determination of Thermal
Conductivity of Soil and Soft Rock by Thermal Needle
Probe Procedure
Linear Coefficient of Thermal Expansion of Rock Using
Bonded Electric Resistance Strain Gages
Flow Rate for Calibration of Personal Sampling Pumps
Determining Aerobic Biodegradation of Plastic
Materials Under Controlled Compositng Conditions
Quality Assurance Plan for Structural Steel Fabrication
for Highway Structures
Alkaline Soap Powder
Airport Pavement Condition Index Surveys
Resistance to Bending of Paper and Paperboard (TaberType Tester in Basic Configuration)
D 5360
D 5362
D 5341
D 5345
D 5372
D 5346
D 5347
D 5348
D 5349
D 5350
D 5351
D 5352
D 5353
D 5354
D 5355
D 5356
D 5357
D 5358
D 5359
D 5363
D 5366
D 5367
D 5361
D 5364
D 5365
D 5368
Design and Construction of Bituminious Surface
Treatments
Snagging Resistance of Fabrics (Bean Bag)
Measuring Coke Reactivity Index (CRI) and Coke
Strength After Reaction (CSR)
Prediluted Aqueous Ethylene Glycol Base Low-Silicate
Engine Coolant (50 Volume Percent Minimum) for
Heavy-Duty Engines Requiring an Initial Charge of
Supplemental Coolant Additive (SCA)
Evaluation of Hydrocarbon Heat Transfer Fluids
Determination of the Pour Point of Petroleum Oil Used
in Fatliquors and Softening Compounds
Determination of the Ash Content of Fats and Oils
Determination of the Moisture Content of Sulfonated
and Sulfated Oils by Distillation with Xylene
Determination of the Moisture and Volatile Content of
Sulfonated and Sulfated Oils Hot-Plate Method
Determination of Organically Combined Sulfuric
Anhydride by Titration, Test
Determination of Organically Combined Sulfuric
Anhydride by Extraction Titration, Test Method B
Determination of Organically Combined Sulfuric
Anhydride, Ash-Gravimetric, Test Method C
Determination of Total Desulfated Fatty Matter
Determination of Total Active Ingredients in Sulfonated
and Sulfated Oils
Specific Gravity of Oils and Liquid Fats
pH of Chrome Tanning Solutions
Determination of Relative Crystallinity of Zeolite
Sodium A by X-Ray Diffraction
Sampling with a Dipper or Pond Sampler
Glass Cullet Recovered From Waste for Use in
Manufacture of Glass Fiber
Anaerobic Single-Component Adhesive (AN)
Determining the Dynamic Performance of a Wind Vane
Standard Practice for Evaluating Coatings Applied Over
Surfaces Treated With Inhibitors Used to Prevent Flash
Rusting of Steel When Water or Wat
Sampling Compacted Bituminous Mixtures for
Laboratory Testing
Design, Fabrication, and Erection of Fiberglass
Reinforced Plastic Chimney Liners With Coal-Fired
Long-Term Ring-Bending Strain of "Fiberglass" (GlassFiber-Reinforced Thermosetting-Resin) Pipe
Standard Test Methods for Gravimetric Determination
D 5369
D 537
D 5370
D 5373
D 5374
D 5377
D 5386
D 5387
D 5375/D 5375M
D 5376
D 5378
D 5379/D 5379M
D 538
D 5380
D 5381
D 5382
D 5385
D 5389
D 5390
D 5392
D 5394
D 5383
D 5384
D 5391
of Total Solvent Extractable Content (TSEC) of Solid
Waste Samples
Extraction of Solid Waste Samples for Chemical
Analysis Using Soxhlet Extraction
Sodium Metasilicate
Pozzolanic Blended Materials in Construction
Applications
Instrumental Determination of Carbon, Hydrogen, and
Nitrogen in Laboratory Samples of Coal and Coke
Forced-Convection Laboratory Ovens for Evaluation of
Electrical Insulation
Rubber Compounding Materials--Ground Coal
Test Method for Color of Liquids Using Tristimulus
Colorimetry
Elements of a Complete Data for Non-Cohesive
Sediments
Test Methods for Liner Removal at High Speeds from
Pressure-Sensitive Label Stock
Rubber Chemicals--Determination of the Percent
Nitrogen in Rubber Antioxidant: Polymerized TMQ
Standard Performance Specification for Woven and
Knitted Shower Curtains for Institutional and Household
Use
Shear Properties of Composite Materials by the VNotched Beam Method
Trisodium Sesquisilicate
Identification of Crystalline Pigments and Extenders in
Paint by X-Ray Diffraction Analysis
X-Ray Fluorescence (XRF) Spectroscopy of Pigments
and Extenders
Evaluation of Optical Properties of Powder Coatings
Test Method for Hydrostatic Pressure Resistance of
Waterproofing Membranes
Open Channel Flow Measurement by Acoustic Velocity
Meter Systems
Open Channel Flow Measurement of Water with
Palmer-Bowlus Flumes
Standard Test Method for Isolation and Enumeration of
Escherichia Coli in Water by the Two-Step Membrane
Filter Procedure
Reclaimed 1,1,1-Trichloroethane
Visual Determination of the Lightfastness of Art
Materials by Art Technologists
Chlorine in Used Petroleum Products (Field Test Kit
Method)
Electrical Conductivity and Resistivity of a Flowing of a
D 5395
D 5396
D 5397
D 5398
D 5399
D 5413
D 5428
D 5434
D 5438
D 5400
D 5401
D 5402
D 5403
D 5404
D 5405
D 5406
D 5407
D 5408
D 5409
D 5441
D 5442
C 494/C 494M
D 5455
D 5410
D 5411
Flowing High Purity Water Sample
Reclaimed Methylene Chloride
Reclaimed Perchloroethylene
Test Method for Evaluation of Stress Crack Resistance
of Polyolefin Geomembranes Using Notched Constant
Tensile Load Test
Visual Evaluation of the Lightfastness of Art Materials
by the User
Standard Test Method for Boiling Point Distribution of
Hydrocarbon Solvents by Gas Chromatography
Measurement of Water Levels in Open-Water Bodies
Evaluating the Performance of Inflatable Restraint
Modules
Field Logging of Subsurface Explorations of Soil and
Rock
Practice for Collection of Floor Dust for Chemical
Analysis
Hydroxypropylcellulose
Evaluating Clear Water Repellent Coatings on Wood
Practice for Assessing the Solvent Resistance of Organic
Coatings Using Solvent Rubs
Volatile Content of Radiation Curable Materials
Recovery of Asphalt from Solution Using the Rotovapor
Apparatus
Conducting Time-to-Failure (Creep-Rupture) Tests of
Joints Fabricated from Nonbituminous Organic Roof
Membrane Material
Rubber--Calculation of Producer's Process Performance
Indexes
Standard Test Method for Elastic Moduli of Undrained
Intact Rock Core Specimens in Triaxial Compression
Without Pore Pressure
Set of Data Elements to Describe a Ground-Water Site;
Part 1--Additional Identification Descriptors
Set of Data Elements to Describe a Ground-Water Site;
Part 2--Physical Descriptors
Analysis of Methyl Tert-Butyl Ether ( MTBE) by Gas
Chromatography
Analysis of Petroleum Waxes by Gas Chromatography
Standard Specification for Chemical Admixtures for
Concrete
Short-Term Liquid Sorption Into Paper (Bristow Test)
Set of Data Elements to Describe a Ground-Water Site;
Part 3--Usage Descriptors
Practice for Calculation of Average Energy Per
D 5412
D 5414
D 5415
D 5416
D 5417
D 5418
D 5419
D 542
D 5420
D 5421
D 5422
D 5423
D 5424
D 5425
D 5426
D 5427
D 5429
D 543
D 5430
D 5431
D 5432
D 5433
Disintegration (E) for a Mixture of Radionuclides in
Reactor Coolant
Standard Test Method for Quantification of Complex
Polycyclic Aromatic Hydrocarbon Mixtures or
Petroleum Oils in Water
Evaluation of Horizontal Impact Performance of Load
Unitizing Stretch Warp Materials
Evaluating Load Containment Performance of Stretch
Warp Materials by Vibration Testing
Evaluating Abrasion Resistance of Stretch Wrap
Materials by Vibration Testing
Operation of the Vetterman Drum Tester
Measuring the Dynamic Mechanical Properties of
Plastics Using a Dual Cantilever Beam
Environmental Stress Crack Resistance (ESCR) of
Threaded Plastic Closures
Standard Test Method for Index of Refraction of
Transparent Organic Plastics
Impact Resistance of Flat, Rigid Plastic Specimen by
Means of a Striker Impacted by a Falling Weight
(Gardner Impact)
Standard Specification for Contact Molded "Fiberglass"
(Glass-Fiber-Reinforced Thermosetting Resin) Flanges
Standard Test Method for Measurement of Properties of
Thermoplastic Materials by Screw-Extrusion Capillary
Rheometer
Forced-Convection Laboratory Ovens for Evaluation of
Electrical Insulation
Smoke Obscuration of Insulating Materials Contained in
Electrical or Optical Fiber Cables When Burning in a
Vertical Cable Tray Configuration
Standard Guide for Development of Fire Hazard
Assessment Standards of Electrotechnical Products
Visual Inspection and Grading of Fabrics Used for
Inflatable Restraints
Accelerated Aging of Inflatable Restraint Fabrics
Pretreatment of Backing Fabrics Used in Textile
Conservation Research
Resistance of Plastics to Chemical Reagents
Visually Inspecting and Grading Fabrics
Standard Performance Specification for Woven and
Knitted Sheeting Products for Institutional and
Household Use
Standard Performance Specification for Blanket
Products for Institutional and Household Use
Towel Products for Institutional and Household Use
D 5435
D 5436
D 5437
D 5439
D 5440
D 5443
D 5444
D 5445
D 5451
D 5446
D 5447
D 5449/D 5449M
D 545
D 5452
D 5453
D 5454
D 5457
D 5458
D 5459
D 5460
D 5461
D 5463
D 548
D 5462
D 546
D 5464
Plant Growth and Food Chain Protection
Specification for Cast Poly(Methyl Methacrylate) Plastic
Rods, Tubes, and Shapes
Weathering of Plastics Under Marine Floating Exposure
Determination of Sediment in Moellen
Determining the Melting Point of Fats and Oils
Paraffin, Naphthene, and Aromatic Hydrocarbon Type
Analysis in Petroleum Distillates through 200°C by
Multi-Dimensional Gas Chromatography
Mechanical Size Analysis of Extracted Aggregate
Pictorial Markings for Handling of Goods
Standard Practice for Sampling Using a Trier Sampler
Practice for Determining Physical Properties of Fabrics,
Yarns, and Sewing Thread Used in Inflatable Restraints
Application of Ground-Water Flow Model to a SiteSpecific Problem
Transverse Compressive Properties of Hoop Wound
Polymer Matrix Composite Cylinders
Preformed Expansion Joint Fillers for Concrete
Construction (Nonextruding and Resilient Types)
Test Method for Particulate Contamination in Aviation
Fuels by Laboratory Filtration
Standard Test Method for Determination of Total Sulfur
in Light Hydrocarbons, Motor Fuels and Oils by
Ultraviolet Fluorescence
Test Method for Water Vapor Content of Gaseous Fuels
Using Electronic Moisture Analyzers
Computing the Reference Resistance of Wood-Based
Materials and Structural Connections for Load and
Resistance Factor Design
Peel Cling of Stretch Warp Material
Machine Direction Elastic Recovery and Permanent
Deformation and Stress Retention of Stretch Wrap Film
Rubber Compounding Materials--Water in Rubber
Additives
Rubber Additives--Wet Sieve Analysis of Powdered
Rubber Chemicals
Use of Test Kits to Measure Inorganic Constituents in
Water
Water-Soluble Acidity or Alkalinity of Paper
Standard Test Method for On-Line Measurement of
Low-Level Dissolved Oxygen in Water
Sieve Analysis of Mineral Filler for Road and Paving
Materials
Standard Test Methods for pH Measurement of Water of
D 5465
D 5466
D 5467
D 5468
D 5469
D 5470
D 5471
D 5480
D 5493
D 5472
D 5473
D 5474
D 5475
D 5476
D 5477
D 5478
D 5479
D 5482
D 5484
D 5489
D 5492
D 5486/D 5486M
D 5487
D 5481
D 5483
Low Conductivity
Practice for Determining Microbial Colony Counts from
Waters Analyzed by Plating Methods
Determination of Volatile Organic Chemicals in
Atmospheres (Canister Sampling Methodology)
Compressive Properties of Unidirectional Polymer
Matrix Composites Using a Sandwich Beam
Gross Calorific and Ash Value of Waste Materials
Application of New Spray Applied Polyurethane Foam
and Coated Roofing Systems
Thermal Transmission Properties of Thin Thermally
Conductive Solid Electrical Insulation Materials
O-Xylene 980
Test Method for Engine Oil Volatility by Gas
Chromatography
Permittivity of Geotextiles Under Load
Determining Specific Capacity and Estimating
Transmissivity at the Control Well
Standard Test Method for (Analytical Procedure for)
Analyzing the Effects of Partial Penetration of Control
Well and Determini
Standard Guide for Selection of Data Elements for
Ground-Water Investigations
Nitrogen- and Phosphorus-Containing Pesticides in
Water by Gas Chromatography with a NitrogenPhosphorus Detector
Classification System for Thermoplastic Polyurethane
Materials (TPU)
Identification of Polymer Layers or Inclusions by
Fourier Transform Infrared Spectroscopy (FT-IR)
Viscosity of Materials by a Falling Needle Viscometer
Standard Practice for Testing Biofouling Resistance of
Marine Coatings Partially Immersed
Vapor Pressure of Petroleum Products (Mini Method-Atmospheric)
Specification for Steel Grid Bridge Flooring
Care Symbols for Care Instructions on Textile Products
Determination of Xylene Solubles in Propylene Plastics
Specification for Pressure-Sensitive Tape for Packaging,
Box Closure, and Sealing
Simulated Drop of Loaded Containers by Shock
Machines
Measuring Apparent Viscosity at High- Temperature
and High-Shear Rate by Multicell Capillary Viscometer
Oxidation Induction Time of Lubricating Greases by
D 5485
D 5488
D 5490
D 5491
D 5494
D 5495
D 5497
D 5498
D 5538
D 5539
D 5543
D 5499
D 5500
D 5501
D 5502
D 5503
D 5504
D 5505
D 5506
D 5549
D 5638
D 5675
D 5676
D 5509
Pressure Differential Scanning Calorimetry
Determining the Corrosive Effect of Combustion
Products Using in Cone Corrosimeter
Environmental Labeling of Packaging Materials and
Packages
Comparing Ground-Water Flow Model Simulations to
Site-Specific Information
Recycled Post-Consumer Polyethylene Film Sources for
Molding and Extrusion Materials
Test Method for the Determination of Pyramid Puncture
Resistance of Unprotected and Protected Geomembranes
Standard Practice for Sampling With a Composite
Liquid Waste Sampler (COLIWASA)
Buttons
Guide for Developing a Training Program for Coating
Work Inspectors in Nuclear Facilities
Thermoplastic Elastomers--Terminology and
Abbreviations
Specification for Seed Starter Mix
Test Methods for Low-Level Dissolved Oxygen in
Water
Heat Resistance of Polymer Linings for Flue Gas
Desulfurization Systems
Vehicle Evaluation of Unleaded Automotive SparkIgnition Engine Fuel for Intake Value Deposit
Formation
Determination of Ethanol Content of Denatured Fuel
Ethanol by Gas Chromatography
Test Method for Apparent Density by Physical
Measurements of Manufactured Anode and Cathode
Carbon Used by the Aluminum Industry
Natural Gas Sample-Handling and Conditioning
Systems for Pipeline Instrumetation
Determination of Sulfur Compounds In Natural Gas and
Gaseous Fuels by Gas Chromotography and
Chemiluminescence
Classifying Emulsified Recycling Agents
Organizations Engaged in the Certification of Personnel
Testing and Inspecting Bituminous Paving Materials
The Content of Geostatistical Site Investigation Report
Test Method for Chemical Resistance of Electrical
Insulating Varnishes
Classification for Fluoropolymer Micropowders
Specification for Recycled Polystyrene Molding and
Extrusion Materials
Exposing Plastics to a Simulated Compost Environment
D 5507
D 5508
D 5510
D 5511
D 5512
D 5513
D 5514
D 5515
D 5516
D 5517
D 5518
D 5519
D 5520
D 5521
D 5522
D 5523
D 5524
D 5525
D 5527
D 5532
D 5533
D 5526
Determination of Trace Organic Impurities in Monomer
Grade Vinyl Chloride by Capillary Column/MultiDimensional Gas Chromatography
Determination of Residual Acrylonitrile Monomer in
Styrene-Acrylonitrile Copolymer Resins and NitrileButadiene Rubber by Headspace-Capillary Gas
Chromatography (HS-CGC)
Heat Aging of Oxidatively Degradable Plastics
Determining Anaerobic Biodegradation of Plastic
Materials Under High-Solids Anaerobic-Digestion
Conditions
Exposing Plastics to a Simulated Compost Environment
Using an Externally Heated Reactor
Practice for Microwave Digestion of Industrial Furnace
Feedstreams and Waste for Trace Element Analysis
Large Scale Hydrostatic Punture Testing of
Geosynthetics
Determination of the Swelling Properties of Bituminous
Coal Using a Dilatometer
Standard Test Method for Evaluating the Flexural
Properties of Fire-Retardant Treated Softwood Plywood
Exposed to Elevated Temperatures
Standard Test Method for Determining Extractability of
Metals from Art Materials
Evaluating Color Transfer or Color Loss of Dyed
Fabrics in Laundering
Particle Size Analysis of Natural and Man-Made Riprap
Materials
Laboratory Determination of Creep Properties of Frozen
Soil Samples by Uniaxial Compression
Development of Ground-Water Monitoring Wells in
Granular Aquifers
Minimum Requirements for Laboratories Engaged in
Chemical Analysis of Soil, Rock and Contained Fluid
Polyurethane Raw Materials: Acidity by Argentometric
Determination of Hydrolyzable Chlorine in Monomeric,
Aromatic Isocyanates
Determination of Phenolic Antioxidants in High Density
Polyethylene Using Liquid Chromatography
Exposing Plastics to a Simulated Landfill Environment
Standard Practices for Measuring Surface Wind and
Temperature by Acoustic Means
Micaceous Iron Oxide Pigments for Paint
Evaluation of Automotive Engine Oils in the Sequence
IIIE, Spark-Ignition Engine
Determining Anaerobic Biodegradation of Plastic
D 5528
D 5530
D 5531
D 5534
D 5535
D 5536
D 5537
D 5540
D 5541
D 5542
D 5544
D 5546
D 5547
D 5548
D 555
D 5550
D 5551
D 5552
D 5593
D 56
D 5606
D 5609
D 5554
Materials Under Accelerated Landfill Conditions
Mode I Interlaminar Fracture Toughness of
Unidirectional Fiber-Reinforced Polymer Matrix
Composites
Total Moisture of Hazardous Waste Fuel by Karl
Fischer Titrimetry
Preparation, Maintenance, and Distribution of Physical
Product Standards for Color and Geometric Appearance
of Coatings
Vapor- Phase Rust-Preventing Characteristics of
Hydraulic Fluids
Terminology Relating to Formed-In-Place Sealants for
Joints and Cracks in Pavements
Sampling Forest Trees for Determination of Clear Wood
Properties
Heat Release, Flame Spread and Mass Loss Testing of
Insulating Materials Contained in Electrical or Optical
Fiber Cables When Burning in a Vertical Cable Tray
Configuration
Practice for Flow Control and Temperature Control for
On-Line Water Sampling and Analysis
Developing a Stage-Discharge Relation for Open
Channel Flow
Test Methods for Trace Anions in High Purity Water by
Ion Chromatography
Test Method for On-Line Measurement of Residue After
Evaporation of High-Purity Water
Solubility of Polymer Modified Asphalt Materials in
1,1,1,-Trichloroethane
Clay and Zeolite in Powdered Laundry Detergents by
Atomic Absorption
Evaluating Color Transfer or Color Loss of Dyed
Fabrics in Home Laundering
Testing Drying Oils
Standard Test Method for Specific Gravity of Soil
Solids by Gas Pycnometer
Determenation of the Cloud Point of Oil
Resistance of Colored Leather to Bleeding
Classification for Thermoplastic Elastomers - Olefinic
(TEO)
Standard Test Method for Flash Point by Tag Closed
Cup Tester
Toluene for Toluene Diisocyanate (TDI) Feedstock
Defining Boundary Conditions in Ground-Water Flow
Modeling
Determination of Iodine Value of Fats and Oils
D 5558
D 5553
D 5555
D 5556
D 5557
D 5559
D 5560
D 5562
D 5564
D 5565
D 5566
D 5567
D 5568
D 5569
D 5570
D 5571
D 5572
D 5573
D 5576
Determination of Saponification Value of Fats and Oils
Determination of Unsaponifiable Nonvolatile Matter in
Sulfated Oils
Determination of Free Fatty Acids Contained in Animal,
Marine, and Vegetable Fats and Oils Used in Fats
Liquors and Stuffing Compounds
Determination of Moisture and Other Volatile Matter
Contained in Fats and Oils Used in Fats Liquors and
Softening Compounds
Determination of Insoluble Impurities Contained in Fats
and Oils Used in Fat Liquors and Stuffing Compounds
Determination of Acidity as Free Fatty Acids/Acid
Number in the Absence of Ammonium or
Triethanolamine Soaps in Sulfonated and Sulfated oils
Determination of Neutral Fatty Matter Contained in Fats
and Oils
Determination of Acidity as Free Fatty Acid/Acid
Number in the Presence of Ammonium or
Triethanolamine Soaps
Determination of Total Ammonia Contained in
Sulfonated or Sulfated Oils
Determination of Solidification Point of Fatty Acids
Contained in Animal, Marine, and Vegetable Fats and
Oils
Determination of Inorganic Salt Content of Sulfated and
Sulfonated Oils
Test Method for Hydraulic Conductivity Ratio (HCR)
Testing of Soil/Geotextile Systems
Standard Test Method for Measuring Relative Complex
Permittivity and Relative Magnetic Permeability of
Solid Materials at Microwave Frequencies
Determination of Static Flow of Electrical Grade
Magnesium Oxide for Use in Sheathed Heating
Elements
Test Method for Water Resistance of Tape and
Adhesives Used as a Box Closure
Test Method for Environmental Stress Crack Resistance
(ESCR) of Plastic Tighthead Drums Not Exceeding 60
Gal (227 L) in Rated Capacity
Specification for Adhesives Used for Finger Joints in
Nonstructural Lumber Products
Classifying Failure Modes in Fiber-Reinforced-Plastic
(FRP) Joints
Practice for Determination of Structural Features in
Polyolefins and Polyolefin Copolymers by Infrared
Spectrophotometry (FT-IR)
D 5578
D 5579
D 558
D 5574
D 5575
D 5577
D 5580
D 5581
D 5582
D 5583
D 5584
D 5585
D 5586
D 5587
D 5588
D 5589
D 559
D 5590
D 5591
D 5592
D 5594
D 5599
Test Method for Determination of Ethylene Oxide in
Workplace Atmospheres (HBr Derivatization Method)
Test Method for Evaluating the Thermal Stability of
Manual Transmission Lubricants in a Cyclic Durability
Test
Moisture-Density Relations of Soil-Cement Mixtures
Establishing Allowable Mechanical Properties of WoodBonded Adhesives for Design of Structural Joints
Copolymers of Vinylidene Fluoride (VDF) with Other
Fluorinated Monomers
Techniques to Separate and Indentify Contaminants in
Recycled Plastics
Test Method for Determination of Benzene, Toluene,
Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier
Aromatics, and Total Aromatics in Finished Gasoline by
Gas Chromatography
Standard Test Method for Resistance to Plastic Flow of
Bituminous Mixtures Using Marshall Apparatus (6 inchDiameter Specimen)
Test Method for Determining Formaldehyde Levels
from Wood Products Using a Desiccator
Standard Test Method for Detection and Estimation of
Retention of Wood Preservatives by Aspergillus
Bioassaying
Chemical Analysis of Ammoniacal Copper Quat Type
B(ACQ-B)
Standard Table of Body Measurements for Adult Female
Misses Figure Type, Sizes 2-20
Women Aged 55 and Older (All Figure Types)
Tearing Strength of Fabrics by Trapezoid Procedure
Determination of the Microbial Condition of Paint, Paint
Raw Materials, and Plant Areas
Determining the Resistance of Paint Films and Related
Coatings to Algal Defacement
Wetting and Drying Compacted Soil-Cement Mixtures
Standard Test Method for Determining the Resistance of
Paint Films and Related Coatings to Fungal Defacement
by Accelerated Four-Week Agar Plate
Thermal Shrinkage Force of Yarn and Cord With the
Testrite Thermal Shrinkage Force Tester
Material Properties Needed in Engineering Design
Using Plastics
Determination of the Vinyl Acetate Content of EthyleneVinyl Acetate (EVA) Copolymers by Fourier Transform
Infrared Spectroscopy (FT-IR)
Standard Test Method for Determination of Oxygenates
D 560
D 5600
D 5596
D 5597
D 5598
D 5601
D 5602
D 5603
D 5604
D 5605
D 5607
D 5608
D 561
D 5610
D 5617
D 5633
D 5637
D 5611
D 5612
D 5613
D 5614
D 5615
D 5616
D 5618
in Gasoline by Gas Chromatography and Oxygen
Selective Flame Ionization Detection
Freezing and Thawing Compacted Soil-cement Mixtures
Trace Metals in Petroleum Coke by Inductivity Coupled
Plasma Atomic Emission Spectrometry (ICP-AES)
Microscopic Evaluation of the Dispersion of Carbon
Black in Polyolefin Geosynthetics
Preparation of Oil-Based Ink Resin Solution Using a
Hot Oil Bath
Evaluating Unleaded Automotive Spark-Ignition Engine
Fuel for Electronic Port Fuel Injector Fouling
Tearing Resistance of Roofing and Waterproofing
Materials and Membranes
Static Puncture Resistance of Roofing Membrane
Specimens
Rubber Compounding Materials--Recycled Vulcanizate
Particulate Rubber
Precipitated Silica--Surface Area by Single Point B.E.T.
Nitrogen Adsorption
Styrene-Butadiene Rubber (SBR)--Establishing Raw
Mooney Viscosity Target Values
Performing Laboratory Direct Shear Strength Tests of
Rock Specimens Under Constant Normal Stress
Decontamination of Filed Equipment Used at Low
Radioactive Waste Sites
Carbon Black Pigment for Paint
Defining Initial Conditions in Ground-Water Flow
Modeling
Multi-Axial Tension Test for Geosynthetics
Standard Practice for Sampling with a Scoop
Test Method for Moisture Resistance of Electrical
Insulating Varnishes
Conducting a Sensitivity Analysis for a Ground-Water
Flow Model Application
Quality Planning and Field Implementation of a Water
Quality Measurement Program
Open Channel Measurement of Time of Travel Using
Dye Tracers
Open Channel Flow Measurement of Water with BroadCrested Weirs
Operating Characteristics of Home Reverse Osmosis
Devices
Reclaimed Trichloroethylene
Standard Test Method for Measurement of Barnacle
Adhesion Strength in Shear
D 5619
D 5621
D 562
D 5620
D 5622
D 5623
D 5624
D 5625
D 5626
D 5627
D 5628
D 5629
D 563
D 5630
D 5631
D 5632
D 5634
D 5635
D 5636
D 5639/D 5639M
D 564
D 5640
D 5641
D 5642
D 565
Standard Test Method for Comparing Metal Removal
Fluids Using the Tapping Torque Test Machine
Sonic Shear Stability of Hydraulic Fluid
Consistency of Paints Using the Stormer Viscometer
Evaluating Thin Film Fluid Lubricants in a Drain and
Dry Mode Using Pin and Vee-Block Test Machine
Test Methods for Determination of Total Oxygen in
Gasoline and Methanol Fuels by Reductive Pyrolysis
Test Method for Sulfur Compounds in Light Petroleum
Liquids by Gas Chromatography and Sulfur Selective
Detection
Determining the Transverse-Aggregate Spread Rate for
Surface Treatment Applications
Measuring Length, Width, and Squareness of Sheeted
Paper and Paper Products
Measuring Length, Width, and Squareness of Sheeted
Paper and Paper Products
Test Method for Water Extractable Residue from
Particulate Ion-Exchange Resins
Impact Resistance of Flat, Rigid Plastic Specimens by
Means of a Falling Dart (Tup or Falling Mass)
Test Method for Polyurethane Raw Materials:
Determination of Acidity in Low-Acidity Aromatic
Isocyanates and Polyurethane Prepolymers
Phthlic Anhydride Content of Alkyd Resins and Resin
Solutions
Ash Content in Thermoplastics
Handling Transportation and Storage of Halon 1301
Bromotrifluoromethane (CF3BR)
Halon 1301, Bromotrifluoromethane (CF3BR)
Selection of Permanent and Durable Offset and Book
Papers
Dynamic Puncture Resistance of Roofing Membrane
Specimens
Low Temperature Unrolling of Felt or Sheet Roofing
and Waterproofing Materials
Selection of Corrugated Fiberboard Materials and Box
Construction Based on Performance Requirements
Liquid Paint Driers
Guide for Selection of Weirs and Flumes for OpenChannel Flow Measurement of Water
Geomembrane Seam Evaluation by Vacuum Chamber
Sealed Tube Chemcal Compatibility Test
Test Method for Carbonizable Substances in White
Mineral Oil
D 5663
D 5643
D 5644
D 5645
D 5646
D 5647
D 5648
D 5649
D 5650
D 5651
D 5652
D 5653
D 5654
D 5655
D 5656
D 5657
D 5658
D 5659
D 566
D 5661
D 5662
D 5664
D 5666
D 5660
Validating Recycled Content in Packaging Paper and
Paperboard
Coal Tar Roof Cement, Asbestos Free
Rubber Compounding Materials--Determination of
Particle Size Distribution of Recycled Vulcanizate
Particulate Rubber
Determining Physical Properties of Inflatable Restraint
Cushions
Home Use
Measuring Hairiness of Yarns by the Photo-Electric
Apparatus
Standard Test Method for Torque-Tension Relationship
of Adhesives Used on Threaded Fasteners (Lubricity)
Standard Test Method for Torque Strength of Adhesives
Used on Threaded Fasteners
Resistance to Bending of Paper of Low Bending
Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness
Unit Configuration)
Surface Bond Strength of Wood-Base Fiber and Particle
Panel Materials
Standard Test Methods for Bolted Connections in Wood
and Wood-Base Products
Copper Bis(Dimethyldithiocarbamate)
Ammoniacal Copper Quat Type B (ACQ-B)
Analysis of Coppper Dimethyldithiocarbamate (CDDC)
Treated Wood by Colorimetry
Standard Test Method for Thick-Adherend Metal LapShear Joints for Determination of the Stress-Strain
Behavior of Adhesives in
Standard Test Method for Fluid Tightness Ability of
Adhesives Used on Threaded Fasteners
Standard Practice for Sampling Unconsolidated Waste
From Trucks
Standard Test Method for Chlorophenoxy Acid
Herbicides in Waste Using HPLC
Dropping Point of Lubricating Grease
Related Solvency of Petroleum Oils by the PKP Method
Determining Automotive Gear Oil Compatability with
Typical Oil Seal Elastomers
Standard Test Method for Evaluating the Effects of FireRetardant Treatments and Elevated Temperatures on
Strength Properties of Fire-Retardant
Standard Test Method for P-Phenylenediamine
Antidegradants - Purity by High Performance Liquid
Chromatography
Assessing the Microbial Detoxification of Chemically
D 5665
D 5667
D 5668
D 5669
D 5670
D 5671
D 5672
D 5673
D 5674
D 5677
D 5678
D 5679
D 5680
D 5681
D 5682
D 5683
D 5685
D 5686
D 572
D 5727
D 570
D 5703
D 5687/D 5687M
Contaminated Water and Soil Using a Toxicity Test
with a Luminescent Marine Bacterium
Thermoplastic Fabrics Used in Cold-Applied Roofing
and Waterproofing
Standard Test Method for Rubber From Synthetic
Sources - Total and Water Soluble Ash
Rubber from Synthetic Sources--Volatile Matter
Rubber--Evaluation of Residual Unsaturation in
Hydrogenated Nitrile Rubber (HNBR) by Curemeter
Testing
Standard Test Method for Rubber - Determination of
Residual Unsaturation in Hydrogenated Nitrile Rubber
(HNBR) by Infrared Spectrophotometry
Polishing and Etching Coal Samples for Microscopical
Analysis by Reflected Light
Flexible Cellular Materials--Measurement of Indentation
Force Deflection Using a 25-mm (1-in.) Deflection
Technique
Elements in Water by Inductively Coupled Plasma Mass Spectrometry
Guide for Operation of a Gaging Station
Specification for Fiberglass (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive
Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
Freeze/Thaw Resistance of Wax Emulsion Floor Polish
Standard Practice for Sampling Consolidated Solids in
Drums or Similar Containers
Standard Practice for Sampling Unconsolidated Solids
in Drums or Similar Containers
Waste and Waste Management
Electrical Resistivity of Liquid Paint and Relative
Materials
Flexibility of Roofing and Waterproofing Materials and
Membranes
"Fiberglass" (Glass-Fiber-Reinforced ThermosettingResin) Pressure Pipe Fittings
"Fiberglass" (Glass-Fiber-Reinforced ThermosettingResin) Pipe and Pipe Fittings, Adhesive Bonded Joint
Type Epoxy Resin, for Condensate Return Lines
Test Method for Rubber - Deterioration by Heat and
Oxygen
Specification for Emulsified Refined Coal Tar (Mineral
Colloid Type)
Water Absorption of Plastics
Preparatory Surface Cleaning for Clary Brick Masonry
Preparation of Flat Composite Panels with Processing
D 5702
D 5704
D 5705
D 5706
D 5707
D 5708
D 5709
D 5729
D 573
D 5826
D 5710
D 5711
D 5712
D 5713
D 5714
D 5715
D 5716
D 5717
D 5718
D 5719
D 5721
D 5724
C 1495
D 5720
Guidelines for Specimen Preparation
Field Sampling of Coating Films for Analysis for Heavy
Metals
Standard Test Method for Evaluation of the Thermal and
Oxidative Stability of Lubricating Oils Used for Manual
Transmissions and Final Drive Axles
Measurement of Hydrogen Sulfide in the Vapor Phase
Above Residual Fuel Oils
Determining Extreme Pressure Properties of
Lubricating Greases Using ab High- Frequency,Linear
Oscillation (SRV) Test Machine
Measuring Friction and Wear Properties of Lubricating
Grease Using a High- Frequency, Linear-Oscillation
(SRV) Test Machine
Standard Test Methods for Determination of Nickel,
Vanadium, and Iron in Crude Oils and Residual Fuels by
Inductively Coupled Plasma (ICP) Atomic Emission
Spectrometry
Sieve Analysis of Petroleum Coke
Thickness of Nonwoven Fabrics
Test Method for Rubber - Deterioration in an Air Oven
Standard Tables of Body Measurements for Children,
Sizes 2 to 6x/7
Trinidad Lake Modified Asphalt
Adherent Fines Test
Analysis of Protein in Natural Rubber and Its Products
Test Method for Analysis of High Purity Benzene for
Cyclohexane Feedstock by Capillary Gas
Chromatography
Digital Geospatial Metadata
Standard Test Method for Estimating the Degree of
Humification of Peat and Other Organic Soils
(Visual/Manual Method)
Standard Test Method for Measuring the Rate of Well
Discharge by Circular Orifice Weir
Design of Ground-Water Monitoring Systems in Karst
and Fractured-Rock Aquifers
Standard Guide for Documenting a Ground-Water Flow
Model Application
Standard Guide for Simulation of Subsurface Airflow
Using Ground-Water Flow Modeling Codes
Air-Oven Aging of Polyolefin Geomembranes
Gouache Paints
Standard Test Method for Effect of Surface Grinding on
Flexure Strength of Advanced Ceramics
Static Calibration of Electronic Transducer Based
D 5722
D 5723
D 5725
D 5726
D 5728
D 5730
D 5731
D 5732
D 5737
D 5753
D 5777
D 578
D 5733
D 5734
D 5735
D 5736
D 5738
D 5739
D 5740
D 5741
D 5742
Pressure Measurement Systems for Geotechnical
Purposes
Performing Accelerated Outdoor Weathering of Factory
Coated Embossed Hardboard Using Concentrated
Natural Sunlight and a Soak-Freeze-Thaw Procedure
Determination of Chromium Treatment Weight on
Metal Substrates by X-Ray Fluorescence
Surface Wettability and Absorbency of Sheeted
Materials Using an Automated Contant Angle Tester
Thermoplastic Fabrics Used in Hot-Applied Roofing
and Waterproofing
Standard Practices for Securement of Cargo in
Intermodal and Unimodal Surface Transport
Site Characterization for Environmental Purposes With
Emphasis on Soil, Rock, the Vadose Zone and Ground
Water
Determination of the Point Load Strength Index of Rock
Standard Test Method for Stiffness of Nonwoven
Fabrics Using the Cantilever Test
Standard Guide for Methods for Measuring Well
Discharge
Planning and Conducting Borehole Geophysical
Logging
Guide for Using the Seismic Refraction Method for
Subsurface Investigation
Specification for Glass Fiber Strands
Tearing Strength of Nonwoven Fabrics by the Trapezoid
Procedure
Standard Test Method for Tearing Strength of
Nonwoven Fabrics by Falling-Pendulum (Elmendorf)
Apparatus
Standard Test Method for Tearing Strength on
Nonwoven Fabrics by the Tongue (Single Rip)
Procedure (Constant-Rate-of-Extension Tensil
Thickness of Nonwoven Fabrics
Standard Guide for Displaying the Results of Chemical
Analyses of Ground Water for Major Ions and Trace
Elements - Diagrams fo
Standard Practice for Oil Spill Source Identification by
Gas Chromatography and Positive Ion Electron Impact
Low Resolution Mass Spectrometry
Writing Material Standards in the Classification D4000
Format
Characterizing Surface Wind Using a Wind Vane and
Rotating Anemometer
Standard Test Method for Determination of the Butane
D 5744
D 5745
D 5746
D 5743
D 5747
D 5748
D 5749
D 575
D 5750/D 5750M
D 5751
D 5752
D 5754
D 5755
D 5756
D 5757
D 5758
D 5759
D 5760
D 5761
D 5762
D 5768
D 5771
D 5774
D 5775
Activity of Activated Carbon
Standard Test Method for Accelerated Weathering of
Solid Materials Using a Modified Humidity Cell
Guide for Developing and Implementing Short-Term
Measures or Early Actions for Site Remediation
Environmental Condition of Property Area Types for
Defense Base Closure and Realignent Facilities
Sampling Single or Multilayered Liquids, With or
Without Solids, In Drums or Similar Containers
Tests to Evaluate the Chemical Resistance of
Geomembranes to Liquids
Protrusion Puncture Resistance of Stretch Wrap Film
Reinforced and Plain Paper Gummed Tape for Sealing
Securing
Rubber Properties in Compression
Width and Length of Pressure Sensitive Tape
Adhesives Used for Laminate Joints in Nonstructural
Lumber Products
Supplemental Coolant Additives (SCAS) for Use in
Precharging Coolants for Heavy-Duty Engines
Standard Guide for Displaying the Results of Chemical
Analyses of Ground Water for Major Ions and Trace
Elements - Trilinear D
Microvacuum Sampling and Indirect Analysis of Dust
by Transmission Electron Microscopy for Asbestos
Structure Number Concentrations
Microvacuum Sampling and Indirect Analysis of Dust
by Transmission Electron Microscopy for Asbestos
Mass Concentration
Standard Test Method for Determination of Attrition
and Abrasion of Powdered Catalysts by Air Jets
Determination of Relative Crystallinity of Zeolite ZSM5 by X-ray Diffraction
Characterization of Coal Fly and Clean Coal
Combustion Fly Ash for Potential Uses
Performance of Manual Transmission Gear Lubricants
Standard Practice for Emulsification/Suspension of
Multiphase Fluid Waste Materials
Standard Test Method for Nitrogen in Petroleum and
Petroleum Products by Boat-Inlet Chemiluminescence
Determination of Iodine Value of Tall Oil Fatty Acids
Cloud Point of Petroleum Products
Standard Test Methods for Rubber From Synthetic
Sources - Chemical Analysis of Extractable
Standard Test Method for Rubber from Synthetic
Sources - Bound Styrene in SBR
D 5763
D 5764
D 5765
D 5766/D 5766M
D 5767
D 5769
D 5770
D 5772
D 5773
D 5776
D 5778
D 5779
D 5780
D 5781
D 5782
D 5787
D 579
D 5823
D 5783
D 5784
D 5785
Oxidation and Thermal Stability Characteristics of Gear
Oils Using Universal Glassware
Evaluating Dowel Bearing Strength of Wood and WoodBased Prducts
Solvent Extraction of Total Petroleum Hydrocarbons
from Soils and Sediments Using Closed Vessel
Microwave Heating
Open Hole Tensile Strength of Polymer Matrix
Composite Laminates
Instrumental Measurement of Distinctness-of-Image
Gloss of Coating Surfaces
Determination of Benzene, Toluene, and Total
Aromatics in Finished Gasolines Gasolines by Gas
Chromatography/Mass Spectrometry
Semi-Quantitative Micro Determination of Acid
Number of Used Lubricating Oils
Cloud Point of Petroeum Products (Linear Cooling Rate
Method)
Cloud Point of Petroleum Products (Constant Cooling
Rate Method )
Bromine Index of Aromatic Hydrocarbons by
Electrometric Titration
Standard Test Method for Performing Electronic
Friction Cone and Piezocone Penetration Testing of
Soils
Field Determination of Apparent Specific Gravity of
Rock and Manmade Materials for Erosion Control
Testing Individual Piles in Permafrost Under Static
Axial Compressive Load
Standard Guide for Use of Dual-Wall ReverseCirculation Drilling for Geoenvironmental Exploration
and the Installation of Subs
Standard Guide for Use of Direct Air-Rotary Drilling for
Geoenvironmental Exploration and the Installation of
Subsurface Water
Standard Practice for Monitoring Well Protection
Greige Woven Glass Fabrics
Standard Test Method for Tuft Height of Pile Floor
Coverings
Standard Guide for Use of Direct Rotary Drilling with
Water-Based Drilling Fluid for Geoenvironmental
Exploration and the Inst
Standard Guide for Use of Hollow-Stem Augers for
Geoenvironmental Exploration and the Installation of
Subsurface Water-Quality
Standard Test Method for (Analytical Procedure) for
D 5786
D 5788
D 5789
D 5790
D 5791
D 5792
D 5793
D 5794
D 5795
D 5796
D 5797
D 5798
D 5799
D 580
D 5800
D 5801
D 5802
D 5803
D 5804
D 5805
D 581
D 5806
D 5807
Determining Transmissivity of Confined Nonleaky
Aquifers by Underdamped We
Standard Practice for (Field Procedure) for Constant
Drawdown Tests in Flowing Wells for Determining
Hydraulic Properties of A
Spiking Organics into Aqueous Samples
Writing Quality Control Specifications for Standard Test
Methods for Organic Constituents
Measurement of Purgeable Organic Compounds in
Water by Capillary Column Gas Chromatography/Mass
Spectrometry
Using Probability Sampling Methods in Studies of
Indoor Air Quality in Buildings
Generation of Environmental Data Related to Waste
Management Activities: Development of Data Quality
Objectives
Binding Sites Per Unit Length or Width of Pile Yarn
Floor Coverings
Determination of Anions in Cathodic Electrocoat
Permeates by Ion Chromatography
Test Method for Determination of Liquid Water
Absorption of Coated Hardboard and Other Composite
Wood Products Via "Cobb Ring" Apparatus
Test Method for Measurement of Dry Film Thickness of
Thin Film Coil-Coated Systems by Destructive Means
Using a Boring Device
Automotive Spark-Ignition Engines
Specification for Fuel Ethanol (Ed75-Ed85) for
Automotive Spark-Ignition Engines
Determination of Peroxides in Butadiene
Greige Woven Glass Tapes and Webbing
Test Method for Evaporation Loss of Lubricating Oils
by the Noack Method
Toughness and Tenacity of Bituminous Materials
Sorption of Bibulous Paper Products (Sorptive Rate and
Capacity Using Gravimetric Principles)
Tensile Strength at Zero-Span ("Wet Zero-Span
Tensile")
Zero-Span Breaking Strength ("Dry Zeo-Span Tensile")
Standard Test Method for Rubber from Synthetic
Sources - Carbon Black in Masterbatches
Glass Fiber Greige Braided Tubular Sleeving
Disinfectant Quaternary Ammonium Salts by
Potentiometric Titration
Evaluating the Overpressurization Characteristics of
Infaltable Restraint Cushions
D 5808
D 5810
D 5811
D 5812
D 5813
D 5814
D 5815
D 5816
D 5817
D 5818
D 5819
D 5820
D 5821
D 5822
D 5824
D 5829
D 5830
D 5842
D 5848
D 5835
D 5827
D 5828
Determining Organic Chloride in Aromatic
Hydrocarbons and Related Chemicals by
Microcoulometry
Spiking into Aqueous Samples
Test Method for Strontium-90 in Water
Determination of Organochlorine Pesticides in Water by
Capillary Column Gas Chromatography
Cured-in-Place Thermosetting Resin Sewer Pipe
Determination of Contamination in Recycled Poly
(Ethylene Terephthalate) (PET) Flakes and Chips Using
a Plaque Test
Determination of Phenolic Antioxidants and Erucamide
Slip Additives in Linear Low Density Polyethylene
Using Liquid Chromatography (LC)
Carbon Black - External Surface Area by Multipoint
Nitrogen Adsorption
Carbon Black, Pelleted-Reduction and Blending of
Gross Samples
Standard Practice for Obtaining Samples of
Geosynthetics from a Test Section for Assessment of
Installation Damage
Guide for Selecting Test Methods for Experimental
Evaluation of Geosynthetic Durability
Pressurized Air Channel Evaluation of Dual Seamed
Geomembranes
Determining the Percentage of Fractured Particles in
Coarse Aggregate
Standard Test Method for Determining Seam Strength in
Inflatable Restraint Cushions
Determining Resistance to Delamination of Adhesive
Bonds in Overlay-Wood Core Laminates Exposed to
Heat and Water
Standard Guide for Preparing a Training Program for
Environmental Analytical Laboratories
Standard Test Method for Solvents Analysis in
Hazardous Waste Using Gas Chromatography
Sampling and Handling of Fuels for Volatillity
Measurement
Mass Per Unit Area of Pile Yarn Floor Coverings
Standard Practice for Sampling Stationary Source
Emissions for the Automated Determination of Gas
Concentrations
Analysis of Engine Coolant for Chloride and Other
Anions by Ion Chromatography
Compatibility of Supplemental Coolant Additives
(SCAs) and Engine Coolant Concentrates
D 5833
D 5834
D 5836
D 5837
D 5839
D 584
D 5840
D 5841
D 5843
D 5844
D 5845
D 5846
D 5853
D 5880
D 5849
D 585
D 5850
D 5851
D 5852
D 5854
D 5855
Source Reduction, Reuse, Reclycling, or Disposal of
Steel Cans
Source Reduction, Reuse, Reclycling, and Disposal of
Solid and Currugated Fiberboard (Cardboard )
Determination of 2,4-Tolune Diisocyanate (2,4-TDI)
and 2,6-Tolune Diisocynate (2,6-TDI) in Workplace
Atmospheres (1-2 PP Method)
Furanic Compounds in Electrical Insulating Liquids by
High Performance Liquid Chromatography (HPLC)
Standard Test Method for Trace Element Analysis of
Hazardous Waste Fuel by Energy-Dispersive X-Ray
Fluorescence Spectrometry
Wool Content of Raw Wool--Laboratory Scale
Standard Specification for Type II Polymer Modified
Asphalt Cement for Use in Pavement Construction
Standard Specification for Type III Polymer Modified
Asphalt Cement for Use in Pavement Construction
Standard Guide for Application of Fully Adhered
Vulcanized Rubber Sheets Used in Waterproofing
Evaluation of Automotive Engine Oils for Inhibition of
Rusting (Sequence IID)
Standard Test Method for Determination of MTBE,
ETBE, TAME, DIPE, Methanol, Ethanol and tertButanol in Gasoline by Infrared
Test Method for Universal Oxidation Test for Hydraulic
and Turbine Oils Using the Universal Oxidation Test
Apparatus
Standard Test Method for Pour Point of Crude Oils
Standard Guide for Subsurface Flow and Transport
Modeling
Standard Test Method for Evaluating Resistance of
Modified, Bituminous Roofing Membranes to Cyclic
Joint Displacement
Sampling and Accepting a Single Lot of Paper,
Paperboard, Fiberboard, and Related Product
Standard Test Method for (Analytical Procedure)
Determining Transmissivity, Storage Coefficient, and
Anisotropy Ratio from a N
Standard Guide for Planning and Implementing a Water
Monitoring Program
Standard Test Method for Erodibility Determination of
Soil in the Field or in the Laboratory by the Jet Index
Method
Mixing and Handling of Liquid Samples of Petroleum
and Petroleum Products
Standard Test Method for (Analytical Procedure) for
D 5857
D 5856
D 5858
D 5859
D 586
D 5865
D 5879
D 5860
D 5861
D 5862
D 5864
D 5864
D 5866
D 5867
D 5868
D 5869
D 5870
D 5882
D 5989
D 6001
D 5871
D 5872
Determining Transmissivity and Storage Coefficient of a
Confined Nonleaky
Standard Specification for Polypropylene Injection and
Extrusion Materials Using ISO Protocol and
Methodology
Test Method for Measurement of Hydraulic
Conductivity of Porous Material Using a Rigid- Wall,
Compaction-Mold Permeater
Guide for Calculating In Situ Equivalent Elastic Moduli
of Pavement Materials Using Layered Elastic Theory
Test Method for Determining the Traction of Footwear
on Painted Surfaces Using the Variable Incidence Tester
Ash in Pulp, Paper, and Paper Products
Standard Test Method for Gross Calorific Value of Coal
and Coke
Surface Site Characterization for On-Site Septic
Systems
Test Method for Evaluation of the Effect of Water
Repellent Treatments on Freeze-Thaw Resistance of
Hydraulic Cement Mortar Specimens
Guide for Significance of Particle Size Measurements of
Coating Powders
Test Method for Evaluation of Engine Oils in TwoStroke Cycle Turbo-Supercharged 6V92TA Diesel
Engine
Test Methods for Determination of Nickle, Vanadium,
Iron, and Sodium in Crude Oils and Residual Fuels by
Flame Atomic Absorption Spectrometry
Standard Test Method for Determining Aerobic Aquatic
Biodegradation of Lubricants or Their Components
Neps in Cotton Fibers (AFIS-N Instrument)
Test Methods for Measurements of Physical Properties
of Cotton Fibers by High Volume Instruments
Standard Test Method for Lap Shear Adhesion for Fiber
Reinforced Plastic (FRP) Bonding
Standard Practice for Dark Oven Heat Exposure of
Bituminous Materials
Calculating the Property Retention Index of Plastics
Standard Test Method for Low Strain Integrity Testing
of Piles
Extruded and Monomer Cast Shapes Made from Nylon
(PA)
Direct-Push Water Sampling for Geoenvironmental
Investigations
Specification for Benzene for Cyclohexane Feedstock
Standard Guide for Use of Casing Advancement
D 5873
D 5874
D 5875
D 5876
D 5877
D 5878
D 5881
D 5883
D 5888
D 5889
D 590
D 5901
D 5884
D 5885
D 5886
D 5887
D 589
D 5890
D 5891
Drilling Methods for Geoenvironmental Exploration and
Installation of Subsurface
Standard Test Method for Determination of Rock
Hardness by Rebound Hammer Method
Test Method for Determination of the impact Value [IV]
of a Soil
Standard Guide for Use of Cable-Tool Drilling and
Sampling Methods for Geoenvironmental Exploration
and Installation of Subsur
Standard Guide for Use of Direct Rotary Wireline
Casing Advancement Drilling Methods for
Geoenvironmental Exploration and Inst
Standard Guide for Displaying Results of Chemical
Analyses of Ground Water for Major Ions and Trace
Elements - Diagrams Based
Using Rock-Mass Classification Systems for
Engineering Purposes
Test Method for [Analytical Procedure] Determining
Transmissivity of Confined Nonleaky Aquifers by
Critically Damped Well Response to Instantaneous
Change in Head [Slug]
Guide for Use of Rotary Kiln Produced Expanded Shale,
Clay or Slate [ESCS] as a Mineral Amendment in
Topsoil Used for Landscaping and Related Purposes
Guide for Storage and Handling of Geosynthetic Clay
Liners
Practice for Quality Control of Geosynthetic Clay Liners
Petroleum Wax in Paper
Freezing Point of Aviation Fuels (Automated Optical
Method)
Test Method for Determining Tearing Strength of
Internally Reinforced Geomembranes
Oxidative Induction Time of Polyolefin Geosynthetics
by High-Pressure Differential Scanning Calorimetry
Guide for Selection of Test Methods to Determine Rate
of Fluid Permeation Through Geomembranes for
Specific Applications
Measurement of Index Flux Through Saturated
Geosynthetic Clay Liner Specimens Using a Flexible
Wall Permeameter
Opacity of Paper (15°/Diffuse Illuminant A, 89%
Reflectance Backing and Paper Backing)
Test Method for Swell Index of Clay Mineral
Component of Geosynthetic Clat Liners
Fluid Loss of Clay Component of Geosynthetic Clay
Liners
D 5892
D 5893
D 5894
D 5903
D 5905
D 5985
D 5895
D 5896
D 5897
D 5898
D 5906
D 5899
D 5902
D 5906
D 5907
D 5968
D 5979
D 5981
D 5908
D 5909
D 5910
D 5911
D 5912
D 5913
Standard Specification for Type IV Polymer-Modified
Asphalt Cement for Use in Pavement Construction
Cold-Applied, Single Component, Chemically Curing
Silicone Joint Sealant for Portland Cement Concrete
Pavements
Practice for Cyclic Salt Fog/UV Exposure of Painted
Metal, [Alternating Exposures in a Fog/ Dry Cabinet
and a UV/ Condensation Cabinet]
Planning and Preparing for a Groundwater Sampling
Event
Preparation of Substitute Wastewater
Pour Point of Petroleum Products (Rotational Method)
Standard Test Methods for Measuring Times of Drying
or Curing During Film Formation of Organic Coatings
Using Mechanical Recorders
Test Method for Carbohydrate Distribution of Cellulosic
Materials
Determination of Percent Hydroxcyl on Cellulose Esters
by Potentiometric Titration - Alternative Method
Standard Details for Adhered Sheet Waterproofing
Practice for Use of Reversed-Phase High Performance
Liquid Chromatographic Systems
Rubber Compounding Materials for Use in Computer
Material Management Systems
Rubber--Determination of Residual Unsaturation in
Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
Guide for Measuring Horizontal Positioning During
Measurements of Surface Water Depths
Filterable and Nonfilterable Matter in Water
Standard Test Method for Evaluation of Corrosiveness
of Diesel Engine Oil
Conceptualization and Characterization of GroundWater Systems
Calibrating a Ground-Water Flow Model Application
Resin Binder Distribution and Binder Penetration
Analysis of Polyester Nonwoven Fabrics
Drying Time of Oxidative-Drying Printing Inks by
Squalene Resistance
Test Method for Determination of Free Formaldehyde in
Emulsion Polymers by Liquid Chromatography
Practice for Minimum Set of Data Elements to Identify a
Soil Sampling Site
(Analytical Procedure) Determining Hydraulic
Conductivity of an Unconfined Aquifer by Overdamped
Well Response to Instantaneous Change in Head (Slug)
Test Method for Evaluation of Cleanability of Paint
D 5916
D 5917
D 5918
D 5919
D 6098
D 61
D 5920
D 5921
D 5922
D 5923
D 5924
C 1504M
D 5925
D 5926
D 5927
D 5928
D 5929
D 5930
D 5931
D 5932
Brushes
Detection and Enumeration of Clostridium Perfringens
from Water and Extracted Sediments by Membrane
Filtration (MF)
Test Method for Trace Impurities in Monocyclic
Aromatic Hydrocarbons by Gas Chromatography and
External Calibration
Standard Test Methods for Frost Heave and Thaw
Weakening Susceptibility of Soils
Determination of Adsorptive Capacity of Activated
Carbon by a Macro-Isotherm Technique for Adsorbates
at ppb Concentrations
Extruded and Compression Molded Shapes Made from
Polycarbonate (PC)
Test Method for Softening Point of Pitches (Cube-inWater Method)
Test Method [Analytical Procedure] for Tests of
Anisotropic Unconfined Aquifers by Neuman Method
Subsurface Site Characterization of Test Pits for On-Site
Septic Systems
Guide for Analysis of Spatial Variation in Geostatistical
Site Investigations
Guide for Selection of Kriging Methods in Geostatistical
Site Investigations
Guide for Selection of Simulation Approaches in
Geostatistical Site Investigations
Standard Specification for Manufacture of Precast
Reinforced Concrete Three-Sided Structures for
Culverts, Storm Drains, and Sewers
Preliminary Sizing and Delineation of Soil Absorption
Field Areas for On-Site Septic Systems
Poly[Vinyl Chloride][PVC] Gaskets for
Drain,Waste,and Vent[DWV], Sewer, Sanitary
Standard Specification for Thermoplastic Polyester
(TPES) Injection and Extrusion Materials Based on ISO
Test Methods
Radioactivity
Determining Biodegradability of Materials Exposed to
Municipal Solid Waste Comporting Condition by
Compost Respirometry
Standard Test Method for Thermal Conductivity of
Plastics by Means of a Transient Line-Source Technique
Density and Relative Density of Engines Coolant
Concentrates and Aqueous Engine Coolants by Digital
Density Meter
Determination of 2,4-Toluene Diisocyanate (2,4-TDI)
D 5933
D 5934
D 594
D 5946
D 5947
D 5948
D 5949
D 595
D 5950
D 5952
D 5953M
D 5954
D 5956
D 5951
D 5955
D 5957
D 5958
D 5959
D 596
D 5960
D 5961/D 5961M
D 5962
D 5963
D 5964
and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9(N-Methylaminomethyl) Anthracene Method) (MAMA)
in the Workplace
2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use
in Wood Constructions
Test Method for Determination of Modulus of Elasticity
for Rigid and Semi-Rigid Plastic Specimens by
Controlled Rate of Loading Using Three-Point Bending
Sodium Sesquisilicate
Standard Test Method for Corona-Treated Polymer
Films Using Water Contact Angle Measurements
Physical Dimensions of Solid Plastics Specimens
Molding Compounds, Thermosetting
Pour Point of Petroleum Products (Automatic Pressure
Pulsing Method)
Tetrasodium Pyrophosphate (Anhydrous)
Pour Point of Petroleum Products (Automatic Tilt
Method)
Standard Guide for Inspecting Water Systems for
Legionellae and Investigating Possible Outbreaks of
Legionellosis (Legionnaires' Disease or Po
Standard Test Method for Determination of NonMethane Organic Compounds (NMOC) in Ambient Air
Using Cryogenic Preconcentration and D
Mercury Sampling and Measurement in Natural Gas by
Atomic Absorption Spectroscopy
Standard Guide for Sampling Strategies for
Heterogeneous Wastes
Preparing Residual Solids Obtained After
Biodegradability Standard Methods for Plastics in Solid
Waste for Toxicity and Compost Quality Testing
Estimating Contribution of Environmental Tobacco
Smoke to Respirable Suspended Particles Based on
UVPM and FPM
Flood Testing Horizontal Waterproofing Installations
Preparation of Oil-Based Ink Resin Solutions
Bulk Density of Level Paintbrush Filaments
Reporting Results of Analysis of Water
Technical Grade Ethylene Dichloride
Bearing Response of Polymer Matrix Composite
Laminates
Maintaining Unqualified Coatings (Paints) Within Level
I Areas of a Nuclear Power Facility
Rubber Property Abrasion Resistance Rotary Drum
Abrader
Rubber IRM 902 and IRM 903 Replacement Oils for
D 5965
D 5966
D 5967
D 5970
D 5971
D 5972
D 5973
D 5974
D 5976
D 5978
D 5980
D 5975
D 5977
D 5982
D 5983
D 5984
D 5986
D 5987
D 5990
D 5991
D 5992
D 5993
ASTM No. 2 and ASTM No. 3 Oils
Specific Gravity of Coating Powders
Evaluation of Engine Oils for Roller Follower Wear in
Light-Duty Diesel Engine
Evaluation of Diesel Engine Oils in T-8 Diesel Engine
Deterioration of Geotextiles form Outdoor Exposure
Practice for Sampling Freshly Mixed Controlled LowStrength Material
Test Method for Freezing Point of Aviation Fuels
(Automatic Phase Transition Method)
Specification for Elastomeric Strip Seals with Steel
Locking Edge Rails Used in Expansion Joint Sealing
Standard Test Methods Fatty and Rosin Acids in Tall
Oil Fractionation Products by Capillary Gas
Chromatography
Standard Specification for Type I Polymer Modified
Asphalt Cement for Use in Pavement Construction
Maintenance and Rehabilitation of Ground-Water
Monitoring Wells
Selection and Documentation of Existing Wells for Use
in Environmental Site Characterization and Monitoring
Determining the Stability of Compost by Measuring
Oxygen Consumption
High Load Rotational Spherical Bearings for Bridges
and Structures
Determining Cement Content of Fresh Soil-Cement
[Heat of Neutralization Method
Methyl Tertiary-Butyl Ether (MTBE) for Downstream
Blending with Automotive Spark Ignition Fuel
Semi-Quantitative Field Test Method for Base Number
in Petroleum Products by Color-Indicator Titration
Determination of Oxygenates, Benzene, Toluene, C8C12 Aromatics and Total Aromatics in Finished
Gasoline by Gas Chromatography/Fourier Transform
Infrared Spectroscopy
Total Fluorine in Coal and Coke by Pyrohydrolytic
Extraction and Ion Selective Electrode or Ion
Chromatograph Methods
Polyketone Injection and Extrusion Materials (PK)
Separation and Identification of Poly(Vinyl Chloride)
(PVC) Contamination in Poly(Ethylene Terephthalate)
(PET) Flake
Standard Guide for Dynamic Testing of Vulcanized
Rubber and Rubber-Like Materials Using Vibratory
Methods
Measuring Mass Per Unit of Geosynthetic Clay Liners
D 5994
D 5995
D 5996
D 5997
D 5998
D 5999
D6
D 600
D 6009
D 6015
D 6026
D 6004
D 6000
D 6002
D 6003
D 6005
D 6006
D 6007
D 6008
D 601
D 6010
D 6011
D 6012
D 6074
D 608
D 6080
D 6013
Measuring Core Thickness of Textured Geomembrane
Environmental Site Characterization in Cold Regions
Standard Test Method for Measuring Anionic
Contaminants in High-Purity Water by On-Line Ion
Chromatography
Standard Test Method for On-Line Monitoring of Total
Carbon, Inorganic Carbon in Water by Ultraviolet,
Persulfate Oxidation, a
Molded Polyethylene Shipping and Storage Drums
Noninterference of Adhesives in Repulping
Loss on Heating of Oil and Asphaltic Compounds
Liquid Paint Driers
Standard Guide for Sampling Waste Piles
Standard Test Method for Static Water Absorption of
Leather
Practice for Using Significant Digits in Geotechnical
Data
Determining Adhesive Shear Strength of Carpet
Adhesives
Presentation of Water-Level Information From GroundWater Sites
Assessing the Compostability of Environmentally
Degradable Plastics
Determining Weight Loss From Plastic Materials
Exposed to Simulated Municipal Solid-Waste (MSW)
Aerobic Compost Environment
Determining Slump Resistance of Carpet Adhesives
Assessing Biodegradability of Hydraulic Fluids
Determining Formaldehyde Concentration in Air from
Wood Products Using a Small Scale Chamber
Conducting Environmental Baseline Surveys
Oiticica Oil (Permanently Liquid)
Standard Practice for Closed Vessel Microwave Solvent
Extraction of Organic Compounds from Solid Matrices
Determining the Performance of a Sonic
Anemometer/Thermometer
Determination of Resistance of Glove Leather to
Bleeding
Guide for Characterizing Hydrocarbon Lubricant Base
Oils
Standard Specification for Dibutyl Phthalate
Defining the Viscosity Characteristics of Hydraulic
Fluids
Determination of Area Stability of Leather to
Laundering
D 6014
D 6016
D 6017
D 6018
D 602
D 6021
D 6019
D 6020
D 6084
D 6089
D 6022
D 6023
D 6024
D 6025
D 6027
D 6028
D 6029
D 603
D 6030
D 6032
D 6054
D 6064
D 6072
D 6031
Determination of Dynamic Water Absorption of Leather
Surfaces
Determination of Nitrogen, Water Extractable in Leather
Determination of Magnesium Sulfate (Epsom Salt) in
Leather
Determining the Presence of Lead Salts in Leather
Barium Sulfate Pigments
Standard Test Method for Measurement of Total
Hydrogen Sulfide in Residual Fuels by Multiple
Headspace Extraction and Sulfur Specif
Determination of Chromic Oxide in Basic Chromium
Tanning Liquors (Ammonium Persulfate Oxidation)
Calculation of (Non-Mineral) Combined Tanning
Agents and Degree of Tannage
Test Method for Elastic Recovery of Bituminous
Materials by Ductilometer
Documenting a Ground-Water Sampling Event
Permanent Shear Stability Indes
Test Method for Unit Weight, Yield, Cement Content,
and Air Content[Gravimetric] of Controlled Low
Strength Material[CLSM]
Test Method for Ball Drop on Controlled Low Strength
Material[CLSM]to Determine Suitability for Load
Application
Guide for Developing and Evaluating Ground-Water
Modeling Codes
Calibrating Linear Displacement Transducers for
Geotechnical Purposes
Test Method [Analytical Procedure]for Determining
Hydraulic Properties of a Confined Aquifer Taking into
Consideration Storage of Water in Leaky Confining
Determining Hydraulic Properties of a Confined Aquifer
and a Leaky Confining Bed with Negligible Storage by
the Hantush-Jacob Method
Aluminum Silicate Pigments (Hydrous)
Selection of Methods for Assessing Ground Water or
Aquifer Sensitivity and Vulnerabiliy
Determining Rock Quality Designation (RQD) of Rock
Core
Conditioning Electrical Insulating Materials for Testing
HFC-227ea, 1,1,1,2,,3,3,3-Heptafluoropropane
(CF3CHFCF3)
Installation of Geosynthetic Clay Liners
Test Method for Logging in Situ Moisture Content and
Density of Soil and Rock by the Nuclear Method in
Horizontal, Slanted, and Vertical Access Tubes
D 6033
D 6034
D 6035
D 6036
D 6037
D 6039/D 6039M
D 6038
D 604
D 6040
D 6041
D 6042
D 6043
D 6044
D 6045
D 6046
D 6047
D 6048
D 6049
D 605
D 6050
D 6051
D 6052
Guide for Describing the Functionality of a GroundWater Modeling Code
Determining the Efficiency of a Production Well in a
Confined Aquifer from a Constant Rate Pumping Test
Determining the Effect of Freeze-Thaw on Hydraulic
Conductivity of Compacted or Undisturbed Soil
Speimens Using a Flexible Wall Permeameter
Displaying the Results of Chemical Analysis of Ground
Water for Major Ions and Trace Elements----Use of
Maps
Dry Abrasion Mar Resistance of High Gloss Coatings
Crates, Wood, Open and Covered
Determining the Compatibility of Resin/Solvent
Mixtures by Precipitation Temperature
Diatomaceous Silica Pigment
Guide to Standard Test Methods for Unsintered
Polytertrafluoroethylene[PTFE] Extruded Film or Tape
Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced
Thermosetting Resin) Corrosion Resistant Pipe and
Fittings
Test Method for Determination of Phenolic Antioxidants
and Erucamide Slip Additives in Polypropylene
Homopolymer Formulations Using Liquid
Chromatography [LC]
Selection of Permanent and Durable Artist's Paper
Guide for Representative Sampling for Managment of
Waste and Contaminated Media
Color of Petroleum Products by the Automtic
Tristimulus Method
Hydraulic Fluids for Environmental Impact
Rubber, Raw-Determination of 5-Ethylidenenorbornene
(ENB) or Dicyclopentadiene (DCPD) in EthylenePropylene-Diene (EPDM) Terpolymers
Stress Relaxation Testing of Raw Rubber, Unvulcanized
Rubber Compounds, and Thermoplastic Elastomers
Rubber Property--Measurement of the Viscous and
Elastic Behavior of Unvulcanized Raw Rubbers and
Rubber Compounds by Compression Between Parallel
Plates
magnesium Silicate Pigment (Talc)
Test Method for Determination of Insoluble Solids in
Organic Liquid Hazardous Waste
Standard Guide for Composite Sampling and Field
Subsampling for Environmental Waste Management
Activities
Preparation and Elemental Analysis of Liquid
D 6053
D 6061
D 6062M
D 6063
D 6065
D 6057
D 6058
D 6060
D 6066
D 6067
D 6068
D 6069
D 607
D 6070
D 6071
D 6073
D 6075
D 6076
D 6078
D 6079
D 6081
Hazardous Waste by Energy- Dispersive X-Ray
Fluorescence
Test Method for Determination of Volatile Organic
Compound (VOC) Content of Electrical Insulating
Varnishes
Evaluating the Performance of Respirable Aerosol
Samplers
Standard Guide for Personal Samplers of Health-Related
Aerosol Fractions [Metric]
Standard Guide for Sampling of Drums and Similar
Containers by Field Personnel
Handling, Transportation, and Storage of HFC-227ea
1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)
Determining consideration of Airborne Single-Crystal
Ceramic Whiskers in the Workplace Environmental by
face Contrast Microscopy
Determining Concentration of Airborne Single- Crystle
Ceramic Whiskers in the Workplace Environment
Sampling of Process Vents With a Portable Gas
Chromatograph
Determining the Normalized Penetration Resistance of
Sands for Evaluation of Liquefaction Potential
Using the Electronic Cone Penetrometer for
Environmental Site Charaterization
Test Method for Determining J-R Curves of Plastic
Materials
Test Method for Trace Nitrogen in Aromatic
Hydrocarbons by oxidative Combustion and Reduced
Pressure Chemiluminescence Detection
Wet Ground Mica Pigments
Physical Properties of Smooth-Wall, Coilable,
Polyethylene (PE) Conduit (Duct) for Preassembled
Wire and Cable
Standard Test Method for Low Level Sodium in High
Purity Water by Graphite Furnace Atomic Absorption
Spectroscopy
Relative Setting of Heatset Printing Inks by the
Sinvatrol Tester
Cracking Resistance of Leather
Shrinkage Temperature of Leather
Test Method for Evaluating Lubricity of Diesel Fuels by
the Scuffing Load Ball-on-Cylinder Lubricity Evaluator
(SLBOCLE)
Test Method for Evaluating Lubricity of Diesel Fuels by
the High-Frequency Reciprocating Rig (HFFR)
Aquatic Toxicity Testing of Lubricants: Sample
D 6082
D 6083
D 6085
D 6087
D 6090
D 6092
D 6093
D 6094
D 609
D 6091
D 6095
D 6096
D 6097
D 6099
D 610
D 6100
D 6101
D 6102
D 6104
D 6105
D 6106
D 6107
D 6108
Preparation and Results Interpretation
Standard Test Method for High Temperature Foaming
Characteristics of Lubricating Oils
Specification for Liquid Applied Acrylic coating Used
in Roofing
Practice for Sampling in Rubber Testing-- Terminology
and Basic Concepts
Evaluating Asphalt-Covered Concrete Bridge Decks
Using Ground Penetrating Radar
Softening Point Resins (Mettler Cup and Ball Metoh)
Specifying Standard Sizes of Stone for Erosion Control
Percent Volume Nonvolatile Matter in Clear or
Pigmented Coatings Using a Helium Gas Pycnometer
Assess the Compostability of Environmentally
Degradable Nonwoven Fabrics
Preparation of Cold-Rolled Steel Panels for Testing
Paint, Varnish, Conversion Coatings, and Related
Coating Products
Practice for 99%/95% Interlaboratory Detection
Estimate [IDE] for Analytical Methods with Negligible
Calibration Error
Volume Resistivity for Extruded Crosslinked and
Thermoplastic Semiconducting Conductor and
Insulation Shielding Materials
Specification for Poly(Vinyl Chloride) Insulation for
Wire and Cable , 90°C Operation
Test Method for Relative Resistance to Vented WaterTree Growth in Solid Dielectric Insulating Materials
Test Method for Polyurethane Raw Materials:
Determination of Acidity in Moderate to High Acidity
Aromatic Isocyanates
Evaluating Degree of Rusting on Painted Steel Surfaces
Specification for Extruded, Compression Molded and
Injection Molded Acetal Shapes (POM)
Test Method for Equivalent Black Area (EBA) of Dirt in
Pulp, Paper and Paperboard by Image Analysis
Installation of Geosynthetic Clay Liners
Determining the Performance of Oil/Water Separators
Subjects to Surface Run-Off
Application of Electrical Discharge Surface Treatment
(Activation) of Plastics for Adhesive Bonding
Establishing the Nomenclature of Ground-Water
Aquifers
Stop-Leak Additive for Engine Coolants Used in Light
Duty Service
Compressive Properties of Plastic Lumber and Shapes
D 611
D 6110
D 6111
D 6112
D 6113
D 6114
D 6115
D 6116
D 6117
D 6119
D 612
D 6120
D 6121
D 6122
D 6123/D 6123M
D 6124
D 6126
D 6128
D 613
D 6125
D 6127
D 6129
D 6130
D 6131
D 6132
Aniline Point and Mixed Aniline Point of Petroleum
Products and Hydrocarbon Solvents
Test Methods for Determining the Charpy Impact
Resistance of Notched Specimens of Plastics
Bulk Density and Specific Gravity of Plastic Lumber
and Shapes by Displacement
Compressive and Flexural Creep and Creep-Rupture of
Plastic Lumber and Shapes
Test Method for Using a Cone Calorimeter to Determine
Fire-Test-Response Characteristics of Insulating
Materials Contained in Electrical or Optical Fiber
Cables
Asphalt-Rubber Binder
Mode I Fatigue Delamination Growth Onset of
Unidirectional Fiber- Reinforced Polymer Matrix
Composites
Test Method for Blocking
Mechanical Fasteners in Plastic Lumber and Shapes
Creating Surface Appreance Changes in Pile Yarn Floor
Covering from Foot Traffic
Carbonizable Substances in Paraffin Wax
Electrical Resistivity of Anode and Cathode Carbon
Material at Room Temperature
Test Method for Evaluation of the Load Carrying
Capacity of Lubricants Under Conditions of Low Speed
and High Torque Used for Final Hypoid Drive Axles
Practice for Validation of Multivariate Process Infrared
Spectrophotometers
Specification for Pressure-Sensitive Tape for Light-Duty
Packaging and General Purpose Masking
Residual Powder on Medical Gloves
Specification for HFC-23 (Trifluoromethane, CHF3)
Bulk Solids Using the Jenike Shear Cell
Test Method for Cetane Number of Diesel Fuel Oil
Test Method for Bending Resistance of Paper and
Paperboard (Gurley Type Tester)
Practice for Handling, Transportation, and Storage of
HFC-23 (FE-13, Trifluoromethane, CHF3)
Method for Silicon in Engine Coolant Concentrates by
Atomic Absorption Spectroscopy
Method for Determination of Silicon and Other
Elements in Engine Coolant by Inductively Coupled
Plasma-Atomic Emission Spectroscopy
Evaluating the Relative Tint Undertone of Titanium
Dioxide Pigments
Nondestructive Measurement of Dry Film Thickness of
D 6133
D 6134
D 6135
D 6136
D 6137
D 6138
D 6139
D 6141
D 6142
D 6143
D 6144
D 6147
D 6148
D 6149
D 6150
D 6151
D 6152
D 6153
D 6154
D 6156
D 6157
D 6158
Applied Organic Coatings Over Concrete Using an
Ultrasonic Gage
Acetone Content of Solvent-Reducible and WaterReducible Paints, Coatings, Resins, and Raw Materials
by Direct Injection Into a Gas Chromatograph
Vulcanized Rubber Sheets Used in Waterproofing
Systems
Application of Self-Adhering Modified Bituminous
Waterproofing
Kerosene Number of Unsaturated (Dry) Felt by the
Vacuum Method
Test Method for Sulfuric Acid Resistance of Polymer
Linings for Flue Gas Desulfurization Systems
Determination of Corrosion-Preventive Properties of
Lubricating Greases Under Dynamic Wet Conditions
(Emcor Test)
Test Method for Determining the Aerobic Aquatic
Biodegradation of Lubricants or Their Components
Using the Gledhill Shake Flask
Screening the Portion of a Geosynthetic Clay
Liner(GCL) for Chemical Compatibility to Liquids
Analysis of Phenol by Capillary Gas Chromatography
Iron Content of Bisphenol A(4,4' Isopropylidenediphenol)
Analysis of AMS(à- Methylstyrene) by Capillary Gas
Chromatography
Test Method for Vulcanized Rubber and Thermoplastic
Elastomer -- Determination of Force Decay (Stress
Relaxation) in Compression
Sepearation and Examination of Stickies
Specification for Newsprint Including Newsprint
Manufactured from Recyled Fiber
Test Method for Estimating Processing Losses of
Plastisols and Organosols Due to Volatility
Using Hollow-Stem Augers for Geotechnical
Exploration and Soil Sampling
SEBS-Modified Mopping Asphalt Used in Roofing
Specification for Materials for Bridge Deck
Waterproofing Membrane Systems
Specification for Chemically Modified Asphalt Cement
for Use in Pavement Construction
Use of Reversed-Phase High Performance Liquid
Chromatographic Systems
Determining the Performance of Oil/Water Separators
Subjects to a Sudden Release
Mineral Hydraulic Oils
D 6159
D 6160
D 6161
D 6162
D 6167
D 6171
D 6174
D 6175
D 6163
D 6164
D 6165
D 6166
D 6169
D 617
D 6172
D 6173
D 6176M
D 6177
D 6178
D 6179
D 618
D 6182
Determination of Hydrocarbon Impurities in Ethylene
by Gas Chromatography
Determination of Polychlorinated Biphenyls (PCBs) in
Waste Materials by Gas Chromatography
Crossflow Microfiltration, Ultrafiltration, Nanofiltration
and Reverse Osmosis Membrane Processes
Specification for Styrene Butadiene Styrene (SBS)
Modified Bituminous Sheet Materials Using a
Combination of Polyester and Glass Fiber
Reinforcements
Guide for Conducting Borehole Geophysical Logging:
Mechanical Caliper
Documenting a Ground-Water Modelling Code
Inorganic Sulfate in Surfactants by Potentiometric Lead
Titration
Radial Crush Strength of Extruded Catalyst Particles
Specification for Styrene Butadiene Styrene (SBS)
Modified Bituminous Sheet Materials Using Glass Fiber
Reinforcements
Specification for Styrene Butadiene Styrene (SBS)
Modified Bituminous Sheet Materials Using Polyester
Reinforcements
Comparison, Detection, and Identification of the Odors
of Paints, Inks, and Related Materials
Color of Naval Stores and Related Products
(Instrumental Determination of Gardner Color)
Selection of Soil and Rock Sampling Devices Used
With Drill Rigs for Environmental Investigations
Punching Quality of Phenolic Laminated Sheets
Determining the Volume of Bulk Materials Using
Contours or Cross Sections Created by Direct Operator
Compilation Using Photogrammetric Procedures
Determination of Various Anionic Surfactant Actives by
Potentiometric Titration
Measuring Surface Atmospheric Temperature with
Electrical Resistance Temperature Sensors (Metric)
Determining Emission Profiles of Volatile Organic
Chemicals Emitted from Bedding Sets
Practice for Estimation of Short-term Inhalation
Exposure to Volatile Organic Chemicals Emitted from
Bedding Sets
Test Methods for Rough Handling of Initized Loads and
Large Shipping Cases and Crates
Standard Practice for Conditioning Plastics for Testing
Method for Flexibility and Adhesion of Finish on
Leather
D 6183
D 6184
D 6180
D 6181
D 6184
D 6185
D 6186
D 6187
D 6188
D 6189
D 619
D 6190
D 6191
D 6192
D 6194
D 6195
D 6196
D 6198
D 6199
D 6201
D 6203
D 6206
D 6213
D 6200
D 6202
D 6204
Method for Tackiness of Finish on Leather
Oil Separation from Lubricating Grease (Conical Sieve
Method)
Stability of Insulating Oils of Petroleum Origin Under
Electrical Discharge
Test Method for Measurement of Turbidity in Mineral
Insulating Oil of Petroleum Origin
Test Method for Oil Separation from Lubricating Grease
(Conical Sieve Method)
Evaluating Compatibility of Binary Mixtures of
Lubricating Greases
Oxidation Induction Time of Lubricating Oils by
Pressure Differential Scanning Calorimetry (PDSC)
NULL
Standard Test Method for Viscosity of Cellulose by
Cuprammonium Ball Fall
Evaluating the Efficiency of Chemical Removers for
Organic Coatings
Vulcanized Fibre Used for Electrical Insulation
Cathodic Disbonding of Pipeline Coatings by
Laboratory Simulation of Soil Burial
Test Method for Measurement of Evolved
Formaldehyde from Water Reducible Air-Dry Coatings
Body Measurements for Girls, Sizes 7 to 16
Test Method for Glow-Wire Ignition of Materials
Test methods for Loop Tack
Practice for Selection of Sorbents and Pumped
Sampling/Thermal Desorption Analysis Procedures for
Volatile Organic Compounds in Air
Transport Packaging Design
Practice for Quality of Wood Members of Containers
and Pallets
NULL
Thermal Stability of Way Lubricants
Sampling of coating Films
Tests to Evaluate the Chemical Resistance of Geogrids
to Liquids
Test Method for Determination of Cooling
Characteristics of Quench Oils by Cooling Curve
Analysis
Standard Test Method for Automotive Engine Oils on
the Fuel Economy of Passenger Cars and Light-Duty
Trucks in the Sequence VIA Spark Ignition Engine
Test Method for Rubber-Measurement of Unvulcanized
Rheological Properties Using Rotorless Shear
D 6207
D 6208
D 6209
D 6210
D 6211
D 6212
D 6214
D 6215
D 6216
D 6217
D 6224
D 6225
D 6226
D 6227
D 6221
D 6222
D 6223
D 6228
D 6229
D 623
D 6230
Rheometers
Dimensional Stability of Fabrics to Changes in
Humidity and Temperature
Method for Repassivation Potential of Aluminum and
Its Alloys by Galvanostatic Measurement
Determination of Gaseous and Particulate Polycyclic
Aromatic Hydrocarbons in Ambient Air (Collection on
Sorbent-Backed Filters with Gas Chromatographic/Mass
Spectrometric Analysis)
Fully-Formulated Ethylene-Glycol-Base Engine Coolant
for Heavy-Duty Engines
Fully-Formulated Propylene Glycol-Base Engine
Coolant for Heavy-Duty Engines
Total Sulfur in Aromatic Compounds by
Hydrogenolysis and Rateometric Colorimetry
Standard Test Method for Determining the Integrity of
Field Seams Used in Joining Geomembranes by
Chemical Fusion Methods
Removal of Oily Soils from Metal Surfaces
Opacity Monitor Manufacturers to Certify Conformance
with Design and Performance Specifications
Method for Particulate Contamination in Middle
Distillate Fuels by Laboratory Filtration
Practice for In-Service Monitoring of Lubricating Oil for
Auxiliary Power
Test Method for Granule Cover of Mineral Surfaced
Roofing
Open Cell Content of Rigid Cellular Plastics
Standard Specification for Grade 82 Unleaded Aviation
Gasoline
Specification for Reinforced Bituminous Flashing
Sheets for Roofing and Waterproofing
Specification for Atactic Polypropylene (APP) Modified
Bituminous Sheet Materials Using Polyester
Reinforcements
Specification for Atactic Polypropylene (APP) Modified
Bituminous Sheet Materials Using a Combination of
Polyester and Glass Fiber Reinforcements
Test Method for Determination of Sulfur Compounds in
Natural Gas and Gaseous Fuels by Gas Chromatography
and Flame Photometric Detection
Trace Benezene in Hydrocarbon Solvents by Capillary
Gas Chromatography
Test Methods for Rubber Property - Heat Generation
and Flexing Fatigue in Compression
Monitoring Ground Movement Using Probe-Type
C 1503
D 6231
D 6232
D 6233
D 6234
D 6235
D 6236
D 6237
D 6238
D 6240
D 6242
D 6244
D 6246
D 6239
D 624
D 6241
D 6243
D 6245
D 6247
D 6248
D 6250
D 6251/D 6251M
D 6252/D 6252M
D 6253
Inclinometers
Standard Specification for Silvered Flat Glass Mirror
Specification for HFC-125 (Pentafluoroethane, C2HF5)
Selection of Sampling Equipment for Waste and
Contaminated Media Data Collection Activities
Guide for Data Assessment for environmental Waste
Management Activities
Method for Shake Extraction of Mining Waste by the
Synthetic Precipitation Leaching Procedure
Expedited Site Characterization of Vadose Zone and
Ground Water Contamination at Hazardous Waste
Contaminated Sites
Coring and Logging Cement - or Lime-Stabilized Soil
Guide for Painting Inspectors (Concrete and Masonry
Substrates)
Total Oxygen Demand in Water
Body Measurements for Men Sizes Thirty-Four to Sixty
(34 to 60) Regular
Mass Unit Area of Nonwoven Fabrics
Vertical Compression of Geocomposite Pavement Panel
Drains
Practice for Evaluating the Performance of Diffusive
Samplers
Uranium in Drinking Water by High-Resolution AlphaLiquid-Scintillation Spectrometry
Standard Test Method for Tear Strength of Conventional
Vulcanized Rubber and Thermoplastic Elastomers
Test Method for the Static Puncture Strength of
Geotextiles and Geotextile-Related Products Using a 50mm Probe
Determining the Internal and Interface Shear Resistance
of Geosynthetic Clay Liner by the Direct Shear Method
Guide for Using Indoor Carbon Dioxide Concentrations
to Evaluate Indoor Air Quality and Ventilation
Analysis of Elemental Content in Polyolefins By X-Ray
Fluorescence Spectrometry
Vinyl and Trans Unsaturation in Polyethylene by
Infrared Spectrophotometry
Derivation of Decision Point and Confidence Limit for
Statistical Testing of Mean Concentration in Waste
Management Decisions
Standard Specification for Wood-Cleated Panelboard
Shipping Boxes
Peel Adhesion of Pressure-Sensitive Label Stocks at a
90deg; Angle
Marking of Pallets
D 6254/D 6254M
D 6255/D 6255M
D 6256/D 6256M
D 6257
D 6258
D 6259
D 6260
D 6261
D 6262
D 6263
D 6264
D 6265
D 6266
D 6267
D 6269
D 6270
D 6271
D 6272
D 6273
D 6274
D 6275
D 6276
D 6279
Wirebound Pallet-Type Wood Boxes
Steel or Aluminum Slotted Angle Crates
Wood-Cleated Shipping Boxes with Skidded, LoadBearing Bases
Prediluted Aqueous Propylene Glycol Base Engine
Coolant (50 Volume % Minimum) for Automobile and
Light-Duty Service
Determination of Solvent Red 164 Dye Concentration in
Diesel Fuels
Practice for Determination of a Pooled Limit of
Quantitation
Gravimetric Determination of Carbon Black in Nylon
Materials (PA)
Extruded and Compression Molded Basic Shapes Made
from Thermoplastic Polyester (TPES)
Extruded and Compression Molded Basic Shapes Made
from Thermoplastic Polyester (TPES)
Extruded Rods and Bars Made From Rigid Poly(Vinyl
Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride)
(CPVC)
Test Method for Measuring the Damage Resistance of a
Fiber-Reinforced Polymer-Matrix Composite to a
Concentrated Quasi-Static Indentation Force
Separation of Contaminants in Polymers Using an
Extruder Filter Test
Method for Determining the Amount of Volatile
Organic Compound (VOC) Released From Waterborne
Automotive Coatings and Available for Removal in a
VOC Control Device (Abatement)
Method for Apparent Viscosity of Hydrocarbon Resins
at Elevated Temperatures
Method for Solidification Point of p-Xylene
Use of Scrap Tires in Civil Engineering Applications
Estimating Contribution of Environmental Tobaco
Smoke to Respirable Suspended Particles Based on
Solanesol
Flexural Properties of Unreinforced and Reinforced
Plastics and Electrical Insulating Materials by FourPoint Bending
Methods for Natural Gas Odor Intensity
Conducting Borehole Geophysical Logging -- Gamma
Using pH to Estimate the Soil-Lime Proportion
Requirement for Soil Stabilization
Using pH to Estimate the Soil-Lime Proportion
Requirement for Soil Stabilization
Test Method for Rub Abrasion Mar Resistance of High
D 6280
D 6282
D 6277
D 6278
D 628
D 6281
D 6283
D 6284
D 6285
D 6286
D 6287
D 6288
D 6289
D 629
D 6290
D 6293
D 6294
D 6295/D 6295M
D 6297
D 6302
D 6296
D 6298
D 6299
D 6300
Gloss Coatings
Specification for Zinc Phosphate Pigments
Direct Push Soil Sampling for Environmental Site
Characterizations
Determination of Benzene in Spark-Ignition Engine
Fuels Using Mid Infrared Spectroscopy
Shear Stability of Polymer Containing Fluids Using a
European Diesel Injector Apparatus
Asbestos Tubular Sleeving
Airborne Asbestos Concentration in Ambient and Indoor
Atmospheres as Determined by Transmission Electron
Microscopy Direct Transfer (TEM)
Tuft Element Length of Uncoated Pile Yarn Floor
Coverings
Rubber Property--Effect of Aqueous Solutions with
Available Chlorine and Chloramine
Standard Guide for Locating Abandoned Wells
Selection of Drilling Methods for Environmental Site
Characterization
Cutting Film and Sheeting Test Specimens
Separation and Washing of Recycled Plastics Prior to
Testing
Measuring Shrinkage from Mold Dimensions of Molded
Thermosetting Plastics
Test Methods for Quantitative Analysis of Textiles
Standard Test Method for Color Determination of
Plastic Pellets
Oxygenates and Paraffin, Olefin, Naphthene, Aromatic
(O-PONA) Hydrocarbon Types in Low-Olefin Spark
Ignition Engine Fuels by Gas Chromatography
Corrosion Resistance of Ferrous Metal Fastener
Assemblies Used in Roofing and Waterproofing
Dispensability of Light-Duty Pressure-Sensitive Film
Tape
Asphaltic Plug Joints for Bridges
Evaluating the Kinetic Behaviour of Ion Exchange
Resins
Total Olefins in Spark-ignition Engine Fuels by
Multidimensional Gas Chromatography
Specification for Fiberglass Reinforced StyreneButadiene-Styrene (SBS) Modified Bituminous Sheets
with a Factory Applied Metal Surface
Standard Practice for Applying Statistical Quality
Assurance Techniques to Evaluate Analytical
Measurement System Performance
Practice for Determination of Precision and Bias Data
D 6301
D 6303
D 6304
D 6308
D 6306
D 6307
D 6308
D 6309
D 6311
D 6315
D 6318
D 632
D 6320
D 6312
D 6313
D 6314
D 6316
D 6317
D 6319
D 6321
D 6322
for Use in Test Methods for Petroleum Products and
Lubricants
Collection of Samples of Filterable and Nonfilterable
Matter in Water
Formaldehyde in Water
Determination of Water in Petroleum Products,
Lubricating Oils, and Additives by Coulometric Karl
Fisher Titration
Calculating Bending Strength Design Adjustment
Factors for Fire-Retardant-Treated Plywood Roof
Sheathing
Placement and Use of Diffusion Controlled Passive
Monitors for Gaseous Pollutants in Indoor Air
Asphalt Content of Hot-Mix Asphalt by Ignition Method
Guide for Identification of Composite Materials in
Computerized Material Property Databases
Guide for Development of Standard Data Records for
Computerization of Mechanical Test Data for HighModulus Fiber-Reinforced Composite Materials
Generation of Environmental Data Related to Waste
Management Activities: Selection and Optimization of
Sampling Design
Standard Practice for Manual Sampling of Coal from
Tops of Barges
Calibrating a Fathometer Using a Bar Check Method
Standard Specification for Sodium Chloride
Single Filament Hose Reinforcing Wire Made from
Steel
Developing Appropriate Statistical Approaches for
Ground-Water Detection Monitoring Programs
Total Sulphur in Aromatic Compounds by
Hydrogenolysis and Sulfur Specific Difference
Photometry
Fluorocarbon Perfluoromethoxy (MFA) Resin Molding
and Extrusion Materials
Test Method for Determination of Total, Combustible
and Carbonate Carbon in Solid Residues from Coal and
Coke
Low Level Determination of Total Carbon, Inorganic
Carbon and Organic Carbon in Water by Ultravoilet,
Persulfate Oxidation, and Membrane Conductivity
Detection
Standard Specification for Nitrile Examination Gloves
for Medical Application
Evaluation of Machine Washable T-Shirts
Standard Guide to International Test Methods
D 6323
D 6324
D 6325
D 6326
D 6327
D 6328
D 6333
D 6334
D 6337
D 6338
D 6329
D 633
D 6330
D 6331
D 6332
D 6335
D 6336
D 6339
D 6340
D 6341
Associated with Textile Care Procedures
Laboratory Subsampling of Media Related to Waste
Management Activities
Test Methods for Male Condoms Made from Synthetic
Materials
Determining Open Assembly Time of Carpet Mastic
Adhesives
The Selection of Maximum Transit-Rate Ratios and
Depths for the U.S. Series of Isokinetic SuspendedSediment Samplers
Determination of Radon Decay Product Concentration
and Working Level in Indoor Atmospheres by Active
Sampling on a Filter
Quality Assurance Protocols for Chemical Analysis of
Atmospheric Wet Deposition
Collection of Dislodgeable Pesticide Residues from
Floors
Sulfur in Gasoline by Wavelength Dispersive X-Ray
Fluorescence
Characterization of Woven Paint Applicator Fabrics
Highly Crosslinked Thermoplastic Vulcanizates
(HCTPVs)
Developing Methodology for Evaluating the Ability of
Indoor Materials to Support Microbial Growth Using
Static Environmental Chambers
Road T
Determination of Volatile Organic Compounds
(Excluding Formaldehyde) Emissions from WoodBased Panels Using Small Environmental Chambers
Under Defined Test Conditions
Determination of Mass Concentration of Particulate
Matter from Stationary Sources at Low Concentrations
(Manual Gravimetric Method)
Testing Systems for Measuring Dynamic Responses of
Carbon Monoxide Detectors to Gases and Vapors
Determination of High Temperature Deposits by
Thermo-Oxidation Engine Oil Simulation Test
Evaluation of Vehicles for Pigment Wetting Using a
Vacuum Modified Sigma Blade Mixer
Syndiotactic Polystyrene Molding and Extrusion (SPS)
Determining Aerobic Biodegradation of Radiolabeled
Plastic Materials in an Aqueous or Compost
Environment
Determination of the Linear Coefficient of Thermal
Expansion of Plastic Lumber and Plastic Lumber Shapes
Between - 30 and 140°F (-34.4 and 60°C)
D 6342
D 6343
D 6344
D 6355
D 6360
D 6345
D 6346
D 6347/D 6347M
D 6348
D 6349
D 635
D 6350
D 6351
D 6352
D 6353
D 6354
D 6356
D 6358
D 6361
D 6362
D 6364
D 6359
D 6363
Polyurethane Raw Materials: Determining Hydroxyl
Number of Polyols by Near Infrared (NIR) Spectroscopy
Thin Thermally Conductive Solid Materials for
Electrical Insulation and Dielectric Applications
Concentrated Impacts to Transport Packages
Human Repeat Insult Patch Testing of Medical Gloves
Enclosed Carbon-Arc Exposures of Plastics
Selection of Methods for Active, Integrative, Sampling
of Volatile Organic Compounds in Air
Acepting, Segregating and Packaging Materials
Collected Through Household Hazardous Waste
Programs
Deterimnation of Bulk Density of Coal Using Nuclear
Backscatter Depth Density Methods
Determination of Gaseous Compounds by Extractive
Direct Interface Fourier Transform Infrared (FTIR)
Spectroscopy
Test Method for Determination of Major and Minor
Elements in Coal, Coke, and Solid Residues from
Combustion of Coal and Coke by Inductively Coupled
Plasma - Atomic Emission Spectrometry
Rate of Burning and/or Extent and Time of Burning of
Plastics in a Horizontal Position
Mercury Sampling and Analysis in Natural Gas by
Atomic Fluorescence Spectroscopy
Determination of Low Temperature Fluidity and
Appearance of Hydraulic Fluids
Boiling Range Distribution of Petroleum Distillates in
Boiling Range from 174 to 700°C by Gas
Chromatography
Sampling Plan and Core Sampling or Prebaked Anodes
Used in Aluminum Production
Sampling Plan and Core Sampling of Carbon Cathode
Blocks Used in Aluminum Production
Hydrogen Gas Generation of Aluminum Emulsified
Asphalt Used as a Protective Coating for Roofing
Classification System for Poly (Phenylene Sulfide)
Injection Molding and Extrusion Materials Using ISO
Methods
Selecting Cleaning Agents and Processes
Certificates of Reference Materials for Water Analysis
Determining the Short-Term Compression Behavior of
Geosynthetics
Minimum Retroreflectance of Newly Applied Pavement
Marking Using Portable Hand-Operated Instruments
Determination of Hydrogen Peroxide and Combined
D 6365
D 6366
D 6367
D 6368
D 6370
D 6371
D 6374
D 6375
D 6376
D 6377
D 6378
D 6379
D 6380
D 6385
D 6388
D 6382
D 6383
D 6386
D 6389
D 6400
D 6414
Organic Peroxides in Atmospheric Water Samples by
Peroxidase Enzyme Floresence Method
Nondestructive Testing of Geomembrane Seams Using
the Spark Test
Total Trace Nitrogen and Its Derivatives in Liquid
Aromatic Hydrocarbons by Oxidative Combustion and
Electrochemical Detection
AMS ( Methylstyrene)
Vapor-Degreasing Grade and General Grade normalPropyl Bromide
Rubber - Compositional Analysis by Thermogravimetry
(TGA)
Cold Filter Plugging Point of Diesel and Heating Fuels
Volatile Matter in Green Petroleum Coke Quartz
Crucible Procedure
Evaporation Loss of Lubricating Oils by
Thermogravimetric Analyzer (TGA) Noack Method
Determination of Trace Metals in Petroleum Coke by
Wavelength Dispersive X-ray Fluorescence
Spectroscopy
Determination of Vapor Pressure of Crude Oil : VPCRx
(Expansion Method)
Determination of Vapor Pressure (VPx) of Petroleum
Products, Hydrocarbons, and Hydrocarbon-Oxygenate
Mixtures (Triple Expansion Method)
Determination of Aromatic Hydorcarbon Types in
Aviation Fuels and Petroleum Distillates - High
Performance Liquid Chromatography Method with
Refractive Index Detection
Specification for Asphalt Roll Roofing (Organic Felt)
Determining Acid Extractable Content in Activated
Carbon by Ashing
Tests to Evaluate the Chemical Resistance of Ceonets to
Liquids
Dynamic Mechanical Analysis and Thermogravimetry
of Roofing and Waterproofing Membrane Material
Time-to-Failure (Creep-Rupture) of Adhesive Joints
Fabricated from EPDM Roof Membrane Material
Preparation of Zinc (Hot-Dip Galvanized) Coated Iron
and Steel Product and Hardware Surfaces for Painting
Tests to Evaluate the Chemical Resistance or
Geotextiles to Liquids
Compostable Plastics
Total Mercury in Coal and Coal Combustion Residues
by Acid Extraction or Wet Oxidation/Cold Vapor
Atomic Absorption
D 642
D 643
D 644
D 645/D 645M
D 646
D 648
D 653
D 656
D 693
D 704
D 705
D 660
D 661
D 664
D 665
D 668
D 669
D 671
D 681
D 685
D 686
D 706
D 707
D 709
D 689
D 69
D 692
Standard Test Method for Determining Compressive
Resistance of Shipping Containers, Components, and
Unit Loads
Folding Endurance of Paper by the Schopper Tester
Moisture Content of Paper and Paperboard by Over
Drying
Thickness of Paper and Paperboard
Grammage of Paper and Paperboard (Weight per Unit
Area)
Standard Test Method for Deflection Temperature of
Plastics Under Flexural Load in the Edgewise Position
Standard Terminology Relating to Soil, Rock, and
Contained Fluids
Pure Toluidine Red Toner
Crushed Aggregate for Macadam Pavements
Specification for Melamine-Formaldehyde Molding
Compounds
Specification for Urea-Formaldehyde Molding
Compounds
Standard Test Method for Evaluating Degree of
Checking of Exterior Paints
Standard Test Method for Evaluating Degree of
Cracking of Exterior Paints
Standard Test Method for Acid Number of Petroleum
Products by Potentiometric Titration
Test Method for Rust-Preventing Characteristics of
Inhibited Mineral Oil in the Presence of Water
Measuring Dimensions of Rigid Rods and Tubes Used
for Electrical Insulation
Dissipation Factor and Permittivity Paralled wirth
Laminations of Laminated Sheet and Plate Materials
Flexural Fatigue of Plastics by Constant-Amplitude-ofForce
Jute Rove and Plied Yarn for Electrical and Packing
Purposes
Conditioning Paper and Paper Products for Testing
Qualitative Examination of Mineral Filler and Mineral
Coating of Paper
Cellulose Acetate Molding and Extrusion Compounds
Cellulose Acetate Butyrate Molding and Extrusion
Compounds
Specification for Laminated Thermosetting Materials
Internal Tearing Resistance of Paper
Friction Tapes
Coarse Aggregate for Bituminous Paving Mixtures
D 695
D 696
D 698
D 71
D 711
D 713
D 724
D 726
D 70
D 710
D 740
D 714
D 715
D 716
D 717
D 718
D 719
D 720
D 721
D 722
D 727
D 774/D 774M
D 852
D 883
D 729
D 731
D 732
D 737
D 746
D 748
D 75
D 750
Compressive Properties of Rigid Plastics
Coefficient of Linear Thermal Expansion of Plastics
Between -30°C and 30°C With a Vitreous Silica
Dilatometer
Standard Test Methods for Laboratory Compaction
Characteristics of Soil Using Standard Effort (12,400 ftlbf/ft³ (600 kN-m/m³))
Test Method for Relative Density of Solid Pitch and
Asphalt (Displacement Method)
No-Pick-Up Time of Traffic Paint
Conducting Road Service Tests on Fluid Traffic
Marking Materials
Surface Wettability of Paper (Angle-of-Contact Method)
Resistance of Nonporous Paper to Passage of Air
Specific Gravity and Density of Semi-Solid Bituminous
Materials
Vulcanized Fibre Sheets, Rods, and Tubes Used for
Electrical Insulation
Standard Specification for Methyl Ethyl Ketone
Standard Test Method for Evaluating Degree of
Blistering of Paints
Analysis of Barium Sulfate Pigment
Evaluating Mica Pigment
Analysis of Magnesium Silicate Pigment
Analysis of Aluminium Silicate Pigment
Analysis of Diatomaceous Silica Pigment
Free-Swelling Index of Coal
Oil Content of Petroleum Waxes
Grease Resistance of Paper (Turpentine Test)
Kerosine Number of Roofing and Flooring Felt by the
Vacuum Method
Bursting Strength of Paper
Test Method for Solidification Point of Benzene
Standard Terminology Relating to Plastics
Vinylidene Chloride Molding Compounds
Molding Index of Thermosetting Molding Powder
Shear Strength of Plastics by Punch Tool
Air Permeability of Textile Fabrics
Standard Test Method for Brittleness Temperature of
Plastics and Elastomers by Impact
Standard Specification for Natural Block Mica and Mica
Films Suitable for Use in Fixed Mica-Dielectric
Capacitors
Sampling Aggregates
Standard Test Method for Rubber Deterioration in
D 747
D 751
D 763
D 768
D 769
D 770
D 76
D 765
D 772
D 776
D 777
D 778
D 779
D 780
D 782
D 784
D 808
D 813
D 816
D 785
D 787
D 788
D 789
D 79
D 790
D 792
D 799
D8
Carbon - Arc Weathering Apparatus
Apparent Bending Modulus of Plastics by Means of a
Cantilever Beam
Coated Fabrics
Standard Specification for Raw and Burnt Umber
Pigments
Standard Specification for Yellow Iron Oxide Hydrated
Standard Specification for Black Synthetic Iron Oxide
Specification for Isopropyl Alcohol
Tensile Testing Machines for Textiles
Raw and Burnt Sienna Pigments
Standard Test Method for Evaluating Degree of Flaking
(Scaling) of Exterior Paints
Determination of Effect of Dry Heat on Properties of
Paper and Board
Flammability of Treated Paper and Paperboard
Hydrogen Ion Concentration (pH) of Paper Extracts
(HotExtraction and Cold-Extraction Procedures)
Water Resistance of Paper, Paperboard, and Other Sheet
Materials by the Dry Indicator Method
Printing Ink Permeation of Paper (Castor Oil Test)
Testing Shipping Containers in Revolving Hexagonal
Drum
Orange Shellac and Other Indian Lacs for Electrical
Insulation
Test Method for Chlorine in New and Used Petroleum
Products (Bomb Method)
Standard Test Method for Rubber Deterioration - Crack
Growth
Standard Test Methods for Rubber Cements
Rockwell Hardness of Plastics and Electrical Insulating
Materials
Ethyl Cellulose Molding and Extrusion Compounds
Poly (Methyl Methacrylate) (PMMA) Molding and
Extrusion Compounds
Determination of Relative Viscosity and Moisture
Content of Polyamide (PA)
Zink Oxide Pigments
Standard Test Methods for Flexural Properties of
Unreinforced and Reinforced Plastics and Electrical
Insulating Materials
Standard Test Methods for Density and Specific Gravity
(Relative Density) of Plastics by Displacement
Liquid Toilet Soap
Roads and Pavements
D 800
D 887
D 889
D 897
E 1049
D 801
D 802
D 803
D 804
D 806
D 807
D 81
D 814
D 817
D 824
D 829
D 831
D 85
D 820
D 822
D 823
D 828
D 83
D 832
D 841
D 843
D 847
D 848
E 1871
Chemical Analysis of Industrial Metal Cleaning
Compositions
Practices for Sampling Water-Formed Deposits
Test Method for Volatile Oil in Rosin
Standard Test Method for Tensile Properties of
Adhesive Bonds
Practice for Sycle Counting in Fatigue Analysis
Sampling and Testing Dipentene
Sampling and Testing Pine Oil
Testing Tall Oil
Naval Stores, Including Tall Oil and Related Products
Cement Content of Soil-Cement Mixtures
Assessing the Tendency of Industrial Boiler Waters to
Cause Embrittlement (USBM Embrittlement Detector
Method)
Basic Carbonate White Lead Pigment
Test Method for Rubber Property - Vapor Transmission
of Volatile Liquids
Testing Cellulose Acetate Propionate and Cellulose
Acetate Butyrate
Rate of Absorption of Water by Bibulous Papers
Wet Tensile Breaking Strength of Paper and Paper
Products
Gas Content of Cable and Capacitor Oils
Specification for Ochre Pigment
Chemical Analysis of Soaps Containing Synthetic
Detergents
Conducting Tests on Paint and Related Coatings and
Materials Using Filtered Open-Flame Carbon-Arc Light
and Water Exposure Apparatus
Standard Practices for Producing Films of Uniform
Thickness of Paint, Varnish, and Related Products on
Test Panels
Tensile Properties of Paper and Paperboard Using
Constant-Rate-of-Elongation Apparatus
Red Lead Pigment
Rubber Conditioning for Low-Temperature Testing
Nitration Grade Toluene
Nitration Grade Xylene
Standard Test Method for Acidity of Benzene, Toluene,
Xylenes, Solvent Naphthas, and Similar Industrial
Aromatic Hydrocarbons
Acid Wash Color of Industrial Aromatic Hydrocarbons
Serving Protocol for Sensory Evaluation of Foods and
Beverages
E 1874
D 849
D 850
D 853
D 854
D 857
D 858
D 859
D 86
D 861
D 865
D 866
D 87
D 874
D 882
D 868
D 869
D 870
D 871
D 873
D 876
D 877
D 878
D 88
D 880
D 885
D 888
Evaluation of Antibacterial Washes by Cup Scrub
Technique
Copper Strip Corrosion by Industrial Aromatic
Hydrocarbons
Standard Test Method for Distillation of Industrial
Aromatic Hydrocarbons and Related Materials
Hydrogen Sulfide and Sulfur Dioxide Content
(Qualitative) of Industrial Aromatic Hydrocarbons
Standard Test Methods for Specific Gravity of Soil
Solids by Water Pycnometer
Aluminum in Water
Manganese in Water
Silica in Water
Standard Test Method for Distillation of Petroleum
Products at Atmospheric Pressure
Standard Practice for Use of the Tex System to
Designate Linear Density of Fibers, Yarn Intermediates,
and Yarns
Test Method for Rubber - Deterioration by Heating in
Air (Test Tube Enclosure)
Styrene-Butadiene (SBR) Synthetic Rubber Jacket for
Wire and Cable
Melting Point of Petroleum Wax (Cooling Curve)
Test Method for Sulfated Ash from Lubricating Oils and
Additives
Standard Test Method for Tensile Properties of Thin
Plastic Sheeting
Evaluating Degree of Bleeding of Traffic Paint
Evaluating Degree of Settling of Paint
Testing Water Resistance of Coatings Using Water
Immersion
Testing Cellulose Acetate
Oxidation Stability of Avaiation Fuels (Potential
Residue Method)
Test Methods for Nonrigid Vinyl Chloride Polymer
Tubing Used for Electrical Insulation
Standard Test Method for Dielectric Breakdown Voltage
of Insulating Liquids Using Disk Electrodes
Inorganic Chlorides and Sulfates in Insulating Oils
Saybolt Viscosity
Shipping Containers
Testing Tire Cords, Tire Cord Fabrics, and Industrial
Filament Yarns Made from Man-Made Organic-Base
Fibers
Dissolved Oxygen in Water
D 890
D 891
D 892
D 893
D 895
D 896
D 898
D 899
D 907
D 910
D 914
D 918
D9
D 901
D 902
D 903
D 904
D 905
D 906
D 909
D 91
D 912
D 922
D 93
E 1045
D 913
D 919
D 92
D 923
D 924
Water in Liquid Naval Stores
Test Methods for Specific Gravity, Apparent, of Liquid
Industrial Chemicals
Foaming Characteristics of Lubricating Oils
Insolubles in Used Lubricating Oils
Water Vapor Permeability of Packages Under Constant
Conditions
Resistance of Adhesive Bonds to Chemical Reagents
Applied Weight Per Unit Area of Dried Adhesive Solids
Practice for Applied Weight Per Unit Area of Liquid
Adhesive
Standard Terminology of Adhesives
Standard Specification for Aviation Gasolines
Standard Test Methods for Ethylcellulose
Test Method for Blocking Resistance of Paper and
Paperboard
Terminology Relating to Wood
Testing Askarels
Standard Test Methods for Flexible Resin-Coated Glass
Fabrics and Glass Fabric Tapes Used for Electrical
Insulation
Peel or Stripping Strength of Adhesive Bonds
Exposure of Adhesive Specimens to Artificial (CarbonArc Type) and Natural Light
Strength Properties of Adhesive Bonds in Shear by
Compression Loading
Strength Properties of Adhesives in Plywood Type
Construction in Shear by Tession Loading
Test Method for Knock Characteristics of Aviation
Gasolines by the Supercharge Method
Precipitation Number of Lugricating Oils
Cuprous Oxide for Use In Antifouling Paints
Standard Specification for Nonrigid Vinyl Chloride
Polymer Tubing
Standard Test Methods for Flash-Point by PenskyMartens Closed Cup Tester
Standard Specification for Pipet, Sahli Hemoglobin
Evaluating Degree of Resistance to Wear of Traffic
Paint
Copper Number of Paper and Paperboard
Flash and Fire Points by Cleveland Open Cup
Sampling Electrical Insulating Liquids
Test Method for Dissipation Factor (or Power Factor)
and Relative Permittivity (Dielectric Constant) of
Electrical Insulating Liquids
D 925
D 926
D 928
D 929
D 930
D 94
D 975
D 932
D 933
D 934
D 937
D 943
D 938
D 942
D 945
D 946
D 95
D 950
D 951
D 952
D 953
D 955
D 957
D 96
D 960
D 961
D 962
D 964
D 968
Standard Test Methods for Rubber Property - Staining
of Surfaces (Contact, Migration, and Diffusion)
Rubber Property--Plasticity and Recovery (Parallel Plate
Method)
Sodium Bicarbonate
Borax
Total Immersion Corrosion Test of Water-Soluble
Aluminum Cleaners
Standard Test Methods for Saponification Number of
Petroleum Products
Standard Specification for Diesel Fuel Oils
Iron Bacteria in Water and Water-Formed Deposits
Practice for Reporting Results of Examination and
Analysis of Water-Formed Deposits
Practices for Identification of Crystalline Compounds in
Water-Formed Deposits By X-Ray Diffraction
Cone Penetration of Petrolatum
Oxidation Chracteristics of Inhibited Mineral Oils
Congealing Point of Petroleum Waxes, Including
Petroleum
Oxidation Stability of Lubricating Greases by Oxygen
Bomb Method
Rubber Properties in Compression or Shear (Mechanical
Oscillograph)
Penetration-Graded Asphalt Cement for Use in
Pavement Construction
Water in Petroleum Products and Bituminous Materials
by Distillation
Impact Strength of Adhesive Bonds
Water Resistance of Shipping Containers by Spray
Method
Bond or Cohesive Strength of Sheet Plastics and
Electrical Insulating Materials
Bearing Strength of Plastics
Standard Test Method of Measuring Shrinkage from
Mold Dimensions of Thermoplastics
Standard Practice for Determining Surface Temperature
of Molds for Plastics
Water and Sediment in Crude Oil by Centrifuge Method
(Field Procedure)
Raw Castor Oil
Dehydrated Castor Oil
Aluminium Powder and Paste Pigments for Paints
Copper Powder for Use in Antifouling Paints
Standard Test Methods for Abrasion Resistance of
D 969
D 97
D 970
D 972
D 974
D 971
D 976
D 977
E1
E 10
E 1003
D 979
D 98
D 984
D 985
D 991
D 994
D 995
D 996
D 998
D 999
E 100
E 1000
E 1001
E 1002
E 1004
E 1007
E 1011
E 1020
E 1041
E 1005
Organic Coatings by Falling Abrasive
Laboratory Determination of Degree of Bleeding of
Traffic Paint
Pour Point of Petroleum Products
Para Red and Toluidine Red Pigments
Evaporation Loss of Lubricating Greases and Oils
Acid and Base Number by Color-Indicator Titration
Interfacial Tension of Oil Against Water by the Ring
Method
Calculated Centane Index of Distillate Fuels
Emulsified Asphalt
Standard Specification for ASTM Thermometers
Standard Test Method for Brinell Hardness of Metallic
Materials
Test Method for Hydrostatic Leak Testing
Sampling Bituminous Paving Mixtures
Calcium Chloride
Reducible Sulfur in Paper
Brightness of Pulp, Paper, and Paperboard (Directional
Reflectance at 457 nm)
Test Method for Rubber Property - Volume Resistivity
Of Electrically Conductive and Antistatic Products
Preformed Expansion Joint Filler for Concrete
(Bituminous Type)
Mixing Plants for Hot-Mixed, Hot-Laid Bituminous
Paving Mixtures
Packaging and Distribution Environments
Penetration of Liquids into Submerged Loaded Shipping
Containers
Vibration Testing of Shipping Containers
ASTM Hydrometers
Radioscopy
Detection and Evaluation of Discontinuities by the
Immersed Pulse-Echo Ultrasonic Method Using
Longitudinal Waves
Leaks Using Ultrasonics
Electromagnetic (Eddy-Current) Measurements of
Electrical Conductivity
Field Measurement of Tapping Machine Impact Sound
Transmission Through Floor-Ceiling Assemblies and
Associated Support Structures
Standard Specification for Sulfuric Acid
Practice for Reporting Incidents
Measurement of Masking Sound in Open Offices
Application and Analysis of Radiometric Monitors for
E 1006
E 1008
E 1043
E 1009
E 1010
E 1012
E 1013
E 1014
E 1016
E 1017
E 1018
E 1019
E 102
E 1021
E 1022
E 1023
E 1025
E 1026
E 1028
E 1029
E 1024
E 103
Reactor Vessel Surveillance, E706 (IIA)
Analysis and Interpretation of Physics Dosimetry
Results for Test Reactors, E 706(II)
Installation, Inspection and Maittenance of Valve Body
Pressure Relief Methods for Geothermal and Other
High-Temprature Liquid Applications
Standard Specification for Pipets, Milk and Cream
Examination
Standard Practice for Evaluating an Optical Emission
Vacuum Spectrometer to Analyze Carbon and LowAlloy Steel
Preparation of Disk Specimens of Steel and Iron for
Spectrochemical Analysis by Remelting
Verification of Specimen Alignment Under Tensile
Loading
Computerized Systems
Standard Guide for Measurement of Outdoor AWeighted Sound Levels
Literature Describing Properties of Electrostatic
Electron Spectrometers
Generic Performance Requirements for Exterior
Residential Windows Assemblies
Application for ASTM Evaluated Cost Section Data
File, E 706 (IIB)
Standard Test Methods for Determination of Carbon,
Sulfur, Nitrogen, and Oxygen in Steel and in Iron,
Nickel, and Cobalt Alloys
Saybolt Furol Viscosity of Bituminous Materials at
HighTemperatures
Measuring The Spectral Response of Photovoltaic Cells
Conducting Bioconcentration Tests with Fishes and
Saltwater Bivalve Molluses
Assessing the Hazard of a Material to Aquatic
Organisms and Their Uses
Design, Manufacture, and Material Grouping
Classification of Hole-Type Image Quality Indicators
(IQI) Used for Radiology
Using the Fricke Refernce Standard Dosimetry System
Total Iron in Iron Ores and Related Materials by
Dichromate Titrimetry
Documentation of Clinical Laboratory Computer
Sysyems
Chemical Analysis of Metals and Metal Bearing Ores by
Flame Atomic Absorption Spectrometry
Rapid Indentation Hardness Testing of Metallic
Materials
E 1030
E 1031
E 1032
E 1033
E 1034
E 1035
E 1036/E 1036M
E 1037
E 1038
E 1039
E 104
E 1040
E 1042
E 1044
E 1046
E 1047
E 105
E 1050
E 1066
E 1078
E 1079
E 1048
E 1052
E 1053
E 1054
Standard Test Method for Radiographic Examination of
Metallic Castings
Analysis of Iron-Making and Steel-Making Slags by XRay Spectrometry
Radiographic Examination of Weldments
Electromagnetic (Eddy-Current) Examination of Type
F-Continuously Welded (CW) Ferromagnetic Pipe and
Tubing Above the Curie Temperature
Neuclear Facility Transient Worker Records
Determining Radiation Exposures for Neuclear Reactor
Vessel Support Structures
Electrical Performance of Nonconcentrator terrestrial
Photovoltaic Modules and Arrays Using Reference Cells
Measuring Particle Size Distribution of RDF-5
Determining Resistance of Photovaltaic Modules to Hail
By Impact with Propelled Ice Balls
Calibration of Silicon Non-Concentrator Photovoltaic
Primary Reference Cells Under Global Irradiation
Maintaining Constant Relative Humidity by Means of
Aqueous Solutions
Physical Characteristics of Non-Concentrator Terrestrial
Photovoltaic Reference Cells
Acoustically Absorptive Materials Applied by Trowel or
Spray
Glass Serological Pipets, (General Purpose and Kahn)
Standard Specification for Glass Westergren Tube,
Disposable
Standard Specification for Blood Sedimentation Tube,
Wintrobe, Glass, Disposable
Probability Sampling of Materials
Impedance and Absorption of Acoustical Materials
Using a Tube, Two Microphones, and a Digital
Frequency Analysis System
Test Method for Ammonia Calorimetric Leak Testing
Specimen Preparation and Mounting in Surface Analysis
Standard Practice for Calibration of Transmission
Densitometers
Color-Coding Pipets or Containers Coated with
Anticoagulants
Efficacy of Antimicrobial Agents Against Viruses in
Suspension
Efficacy of Virucidal Agents Intended for Inanimate
Environmental Surfaces
Evaluating Inactivators of Antimicrobial Agents Used in
Disinfectant, Sanitizer, Antiseptic, or Preserved
Products
E 1055
E 1056
E 1057
E 1058
E 1059
E 106
E 1061
E 108
E 1083
E 1136
E 1062
E 1064
E 1067
E 1068
E 1069
E 107
E 1070
E 1073
E 1074
E 1516
E 1519
E 1521
E 1870
E 1075
E 1076
Evaluation of Eye Irritation in Albino Rabbits
Installation and Service of Solar Domestic Water
Heating Systems for One- and Two- Family Dwel;ings
Measuring Internal Rate of Return and Adjusted Rate of
Return for Investments in Building and Building
Systems
Toxic Contamination of the Environment in the
Operator Enclosure of Self-Propelled Agriculture
Vehicles
Standard Practice for Designating Shapes and Sizes of
Nongraphite Counter Electrodes
Chemical Analysis of Copper-Beryllium Alloys
Standard Specification for Direct-Reading Liquid
Crystal Forehead Thermometers
Test Methods for Fire Tests of Roof Coverings
Test Method for Sensory Evalution of Red Pepper Heat
A Radial Standard Reference Test Tire
Conducting Reproductive Studies with Avian Species
Test Method for Water in Organic Liquids by
Coulometric Karl Fischer Titration
Acoustic Emission Examination of Fiberglass
Reinforced Plastic Resin (FRP) Tanks/ Vessels
Testing Nonmetallic Seal Materials by Immersion in a
Simulated Geothermal Test Fluid
Testing Polymeric Seal Materials for Geothermal and/or
High Temprature Service Under Sealing Stress
Chemical Analysis of Electronic Nickel
Standard Test Method for Determination of Phosphorus
in Iron Ores by Photometric Method
Obtaining a Pharmacological Profile with Mice
Measuring Net Benefits for Investments in Buildings
and Building Systems
Packaging of Unbound Respirable Silicon Carbide
Whiskers
Standard Terminology Relating to Agricultural Tank
Mix Adjuvants
Liquid Holding Capacity (LHC) of Clay Granular
Carriers
Odor and Taste Transfer from Polymeric Packaging
Film
Odor of Ethylene Glycol, Diethylene Glycol,
Triethylene Glycol, Propylene Glycol, and Dipropylene
Glycol and Taste of Propylene Glycol
Maintaining Health and Safety Records at Solid Waste
Processing Facilities
E 1077
E 1081
E 1082
E 1084
E 1085
E 1086
E 1089
E 1091
E 11
E 1090
E 1092
E 1093
E 1094
E 1095
E 1096
E 1097
E 1098
E 1099
E 110
E 1104
E 1110
E 1131
E 1135
E 1102
E 1103
E 1105
E 1106
E 1107
Standard Test Methods for Estimating the Depth of
Decarburization of Steel Specimens
Determination of Total Iron in Iron Ores and Related
Materials by Silver Reduction- Dichromate Titration
Measurement of Vehicular Response to Traveled
Surface Roughness
Solar Transmittance (Terrestrial) of Sheet Materials
Using Sunlight
X-Ray Emission Spectrometric Analysis of Metals
Optical Emission Vacuum Spectrometric Analysis of
Stainless Steel by the Point-to-Plane Excitation
Technique
Water Penetration of Flat Plate Solar Collectors by
Uniform Static Air Pressure Difference
Nonmetallic Honeycomb Core for Use in Shelter Panels
Standard Specification for Wire Cloth and Sieves for
Testing Purposes
Dicumyl Peroxide and Dicumyl Peroxide
Decomposition Products in Resin
Standard Specification for Glass Micro Folin Pipet,
Disposable
Standard Specification for Glass Prothrombin Pipet,
Disposable
Pharmaceutical Glass Graduates
Common Laboratory Glass Funnels
Standard Specification for Laboratory Glass Separator
Funnels
Direct Current Plasma Emission Spectrometry Analysis
Liquid Caustic Soda (Sodium Hydroxide Solution)
Soda Ash, Anhydrous (Sodium Carbonate, Anhydrous)
Indentation Hardness of Metallic Materials by Portable
Hardness Testrs
Clinical Thermometers Probe Covers and Sheaths
Standard Classification for Determination of
Articulation Class
Compositional Analysis by Thermogravimetry
Comparing the Brightness of Fluorescent Penetrants
Terms Relating to Agricultural Chemical Application
Standard Test Method for Determining Subchronic
Dermal Toxicity
Standard Test Method for Field Determination of Water
Penetration of Installed Exterior Windows, Skylights,
Doors, and Curtain Walls, by Uniform
Primary Calibration of Acoustic Emission Sensors
Measuring the Throughput of Resourse-Recovery Unit
E 1108
E 1109
E 111
E 1111
E 1112
E 1114
E 1115
E 1116
E 1117
E 1118
E 1119
E 112
E 1120
E 1121
E 1122
E 1123
E 1124
E 1125
E 1126
E 1127
E 1129/E 1129M
E 1130
E 1132
E 1133
E 1134
E 1137
E 1139
Operations
Determination of the Recovery of a Product in a
Materials Separation Device
Determining the Bulk Density of Solid Waste Fractions
Young's Modulus, Tangent Modulus, and Chord
Modulus
Measuring the Interzone Attenuation of Ceiling Systems
Electronic Thermometer for Intermittent Determination
of Patient Temperature
Determining the Focal Size of Iridium-192 Industrial
Radiographic Sources
Evaluation of Surgical Hand Scrub Formulations
Emulsification Characteristics of Pesticide Emulsifiable
Concentrates
Design of Fuel-Alcohol Manufacturing Facilities
Standard Practice for Acoustic Emission Examination of
Reinforced Thermosetting Resin Pipe (RTRP)
Industrial Grade Ethylene Glycol
Determining Average Grain Size
Liquid Chlorine
Measuring Payback for Investments in Buildings and
Building Systems
Obtaining JK Inclusion Ratings Using Automatic Image
Analysis
Mounting Test Specimens for Sound Transmission Loss
Testing of Naval and Marine Ship Bulkhead Treatment
Materials
Field Measurement of Sound Power Level by the TowSurface Method
Caliberation of Primary Non-Concentrator Terrestrial
Photovoltaic Reference Cells Using a Tabular Spectrum
Biomass Fuels
Depth Profiling in Auger Electron Spectroscopy
Thermocouple Connectors
Objective Measurement of Speech Privacy in Open
Offices Using Articulation Index
Health Requirements Relating to Occupational Exposure
to Quartz Dust
Standard Practice for Performance Testing of Packaged
Laboratory Apparatus for United States Government
Procurements
Source-Separated Steel Cans
Industrial Platinium Resistance Thermometers
Continuous Monitoring of Acousitc Emission from
Metal Pressure Boundaries
E 114
E 1140
E 1142
E 1146
E 115
E 1159
E 116
E 1148
E 1143
E 1147
E 1151
E 1153
E 1154
E 1155
E 1155M
E 1156
E 1157
E 1158
E 1160
E 1163
E 1177
E 1161
E 1162
E 1164
E 1165
Standard Practice for Ultrasonic Pulse-Echo StraightBeam Examination by the Contact Method
Standard Practice for Testing Nitrogen/Phosphorus
Thermionic Ionization Detectors for Use In Gas
Chromatography
Thermophysical Properties
Muriatic Acid (Technical Grade Hydrochloric Acid)
Photographic Processing in Optical Emission
Spectrographic Analysis
Thermocouple Materials, Platinum-Rhodium Alloys,
and Platinum
Photographic Photometry in Spectrochemical Analysis
Measurements of Aqueous Solubility
Determining the Linearity of a Photovaltaic Device
Parameter With Respect to a Test Parameter
Partition Coefficient (N-Octanol/Water) Estimation by
Liquid Chromatography
Ion Chromatography Terms and Relationship
Efficacy of Sanitizers Recommended for Inanimate
Non-Food Contact Surfaces
Qualitatively Evaluating the Comfort, Fit, Function, and
Integrity of Chemical-Protective Suit Ensembles
Standard Test Method for Determining F&infF; Floor
Flatness and F&infL; Floor Levelness Numbers
Standard Test Method for Determining F&infF; Floor
Flatness and F&infL; Floor Levelness Numbers [Metric]
Health Requirements for Occupational Exposure to
Synthetic Amorphous Silica
Sampling and Testing of Reusable Laboratory
Glassware
Material Selection and Fabrication of Reference Blocks
for the Pulsed Longitudinal Wave Ultrasonic
Examination of Metal and Alloy Production Material
On-site Inspection and Verification of Operation of
Solar Domestic Hot Water Systems
Estimating Acute Oral Toxicity in Rats
Engine Coolant Grade Ethylene Glycol
Radiographic Testing of Semiconductors and Electronic
Components
Reporting Sputter Depth Profile Data in Secondary Ion
Mass Spectrometry (SIMS)
Obtaining Spectrophotometric Data for Object-Color
Evaluation
Measurement of Focal Spots of Industrial X-Ray Tubes
by Pinhole Imaging
E 1166
E 1169
E 1178
E 1181
E 1223
E 1172
E 1173
E 1167
E 1168
E 1170
E 1171
E 1174
E 1175
E 1179
E 118
E 1180
E 1182
E 1183
E 1189
E 119
E 1184
E 1185
E 1186
E 1187
E 1188
E 1190
E 1191
Network Level Pavement Management
Conducting Ruggedness Tests
Analysis of Acrylonitrile
Characterizing Duplex Grain Sizes
Specification for Type N Thermocouple Wire
Standard Practice for Describing and Specifying a
Wavelength-Dispersive X-Ray Spectrometer
Evaluation of a Pre-Operative Skin Preparation
Radiation Protection Program for Decommissioning
Operations
Radiological Protection Training for Neuclear Facility
Workers
Simulating Vehicular Response to Longitudinal Profiles
of a Vehicular Traveled Surface
Photovoltaic Modules in Cyclic Temprature and
Humidity Environments
Standard Test Method for Evaluation of the
Effectiveness of Health Care Personnel or Consumer
Handwash Formulations
Determining Solar or Photopic Reflactance,
Transmittance, and Absorptance of Materials Using a
Large Diameter Integrating Sphere
Sound Sources Used for Testing Open Office
Components and Systems
Chemical Analysis of Copper-Chromium Alloys
Preparing Sulfur Prints for Macrostructural Examination
Measurement of Surface Layer Thickness by Radial
Sectioning
Air Drying RDF-5 for further analysis
Standard Specification for Micro-Burets (Koch Style)
Test Methods for Fire Tests of Building Construction
and Materials
Electrothermal (Graphite Furnace) Atomic Absorption
Analysis
Selecting Economic Methods for Evaluating
Investments in Buildings and Building Systems
Air Leakage Site Detection in Building Envelopes and
Air Retarder Systems
Laboratory Accreditatioin
Collection and Reservation of Information and Physical
Items By a Technical Investigator
Standard Test Methods for Strength of Power-Actuated
Fasteners Installed in Structural Members
Conducting Life-Cycle Toxicity Test with Saltwater
Mysids
E 1193
E 1194
E 1192
E 120
E 1202
E 1216
E 1195
E 1196
E 1197
E 1198
E 1199
E 1200
E 1201
E 1203
E 1204
E 1205
E 1206
E 1207
E 1208
E 1209
E 121
E 1212
E 1214
E 1215
E 1217
E 1210
Conducting Renewal Life-Cycle Toxicity Tests with
Daphnia magna
Vapor Pressure
Conducting Acute Toxicity Tests on Aqueous Ambient
Samples and Effluents with Fishes, Macroinvertebrates,
and Amphibians.
Test Methods for Chemical Analysis of Titanium and
Titanium Alloys
Development of Micronucleus Assay Standards
Practice for Sampling for Particulate Contamination by
Tape Lift
Determining a Sorption Constant (Koc for an Organic
Chemical in Soil and Sediments
Determining the Anaerobic Biodegradation Potential of
Organic Chemicals
Conducting a Terrestrial Soil-Core Microcosm Test
Sampling Zooplankton with Pumps
Sampling Zooplankton with a Clarke-Bumpus Plankton
Sampler
Preserving Zooplankton Samples
Sampling Zooplankton with Conical Two Nets
Using Brine Shrimp Nauplii as Food for Test Animals in
Aquatic Toxicology
Dosimetry in Gamma Irradiation Facilities for Food
Processing
Use of a Ceric-Cerous Sulfate Dosimetry System
Computerization of Existing Equipment
Sensory Evaluation of Axillary Deodorancy
Fluorescent Liquid Penetrant Examination Using the
Lipophilic Post-Emulsification Process
Fluorescent Liquid Penetrant Examination Using the
Water-Washable Process
Chemical Analysis of Copper-Tellurium Alloys
Establishment and Maintenance of Quality Control
Systems for Nondestructive Testing Agencies
Guide for Use of Melt Wire Temperature Monitors for
Reactor Vessel Surveillance, E 706 (IIIE)
Trailers Used for Measuring Vehicle Response to Road
Roughness
Practice for Determination of the Specimen Area
Contributing to the Detected Signal in Auger Electron
Spectrometers and Some X-Ray Photoelectron
Spectrometers
Fluorescent Liquid Penetrant Examination Using the
Hydrophilic Post-Emulsification Process
E 1211
E 1213
E 1218
E 1219
E 122
E 1220
E 1221
E 1222
E 1224
E 1237
E 1241
E 1258
E 1225
E 1226
E 1228
E 1229
E 123
E 1230
E 1231
E 1232
E 1233
E 1234
E 1319
E 1320
E 1321
E 1234M
Leak Detection and Location Using Surface-Mounted
Acoustic Emission Sensors
Minimum Resolvable Temperature Difference for
Thermal Imaging Systems
Conducting Static 96-h Toxicity Tests with Microalgae
Fluorescent Liquid Penetrant Examination Using the
Solvent-Removable Process
Standard Practice for Calculating Sample Size to
Estimate, With a Specified Tolerable Error, the Average
for a Characteristic of a Lot or Process
Visible Liquid Penetrant Examination Using the
Solvent-Removable Process
Determining Plane-Strain Crack-Arrest Fracture
Toughness, Kla, of Ferritic Steels
Laboratory Measurement of the Insertion Loss of Pipe
Lagging Systems
Categorizing Fields of Testing for Laboratory
Accreditation Purposes
Installing Bonded Resistance Strain Gages
Conducting Early Life-Stage Toxicity Tests with Fishes
Airflow Calibration of Fan Pressurization Devices
Thermal Conductivity of Solids by Means of the
Guarded-Comparative-Longitudinal Heat Flow
Technique
Pressure and Rate of Pressure Rise for Compustible
Dusts
Test Method for Assay of Peroxy Esters - Catalyzed
Iodometric Procedure
Calcium Hypochlorite
Apparatus for Determining of Water by Distillation
Approximate Determination of Low Molecular Weight
Hydrocarbons in Anhydrous Hydrogen Fluoride
Standard Practice for Calculation of Hazard Potential
Figures-of-Merit for Thermally Unstable Materials
Temperature Limit of Flammability of Chemicals
Test Method for Structural Performance of Exterior
Windows, Curtain Walls, and Doors by Cyclic Air
Pressure Differential
Practice for Handling, Transporting, and Installing
Nonvolatile Residue (NVR) Sample Plates Used in
Environmentally Controlled Areas for Spacecraft
High-Temperature Static Strain Measurement
Standard Reference Radiographs Titanium Castings
Material Ignition and Flame Spread Properties
Handling, Transporting, and Installing Nonvolatile
E 1235
E 1235M
E 1236
E 1238
E 1239
E 124
E 1240
E 1242
E 1245
E 1246
E 1247
E 1248
E 1249
E 125
E 1250
E 1251
E 1252
E 1253
Residue (NVR) Sample Plates Used in Environmentally
Controlled Areas for Spacecraft
Test Method for Gravimetric Determination of
Nonvolatile Residue (NVR) in Environmentally
Controlled Areas for Spacecraft [Metric]
Gravimetric Determination of Nonvolatile Residue
(NVR) in Environmentally Controlled Areas for
Spacecraft [Metric]
Qualifying Charpy Impact Machines as Reference
Machines
Transferring Clinical Observations Between
Independent Computer Systems
Standard Guide for Description of
Reservation/Registration-Admission, Discharge,
Transfer (R-ADT) Systems for Electronic Health Record
(EHR) Sys
Weighing and Drying Apparatus Microchemical
Analysis
Performance Testing of Wind Energy Conversion
System
Using Octanol-Water Partition Coefficient to Estimate
Median Lethal Concentrations for Fish Due to Narcosis
Standard Practice for Determining the Inclusion or
Second-Phase Constituent Content of Metals by
Automatic Image Analysis
Reporting Reliability of Clinical Laboratory Computer
Systems
Identifying Fluorescence in Object-Color Specimens by
Spectrophotometry
Shredder Explosion Protection
Practice for Minimizing Dosimetry Errors in Radiation
Hardness Testing of Silicon Electronic Devices Using
Co-60 Sources
Standard Reference Photographs for Magnetic Particle
Indications on Ferrous Castings
Test Method for Application of Ionization Chambers to
Assess the Low Energy Gamma Component of Cobalt60 Irradiators Used in Radiation-Hardness Testing of
Silicon Electronic Devices
Test Method for Optical Emission Spectrometric
Analysis of Aluminum and Aluminum Alloys by the
Argon Atmosphere, Point-to-Plane, Unipolar SelfInitiating Capacitor Discharge
General Techniques for Obtaining Infrared Spectra for
Qualitative Analysis
Reconstruction of Irradited Charpy Specimens
E 1254
E 1255
E 1256
E 1257
E 1259
E 126
E 1260
E 1261
E 1262
E 1286
E 1287
E 1300
E 1263
E 1264
E 1265
E 1266
E 1268
E 1269
E 127
E 1270
E 1272
E 1273
E 1271
E 1274
E 1275
E 1276
E 1277
E 1278
Storage of Radiographs and Unexposed Industrial
Radiographic Films
Radioscopy
Radiation Thermometers (Single Waveband Type)
Evaluating Grinding Materials Used for Surface
Preparation in Spectrochemical Analysis
Evaluation of Antimicrobials in Distillate Fuels (Based
on Preliminary Screening and Compatibility)
Inspection and Verification of Hydrometers
Dtermining Liquid Drop Size Characteristics in a Spray
using Optical Non-Imaging Light-Scattering Instruments
Selection and Caliburation of Dosimetry Systems for
Radiation Processing
Performance of the Chinese Hamster Ovary
Cell/Hypoxanthine Guanine Phosphoribosyl Transferase
Gene Mutation Assay
Standard Guide for Identification of Herpes Simplex
Virus or its DNA
Practice for Aseptic Sampling of Biological Materials
Determining Load Resistance of Glass in Buildings
Conduct of Micronucleus Assays in Mammalian Bone
Marrow Erythrocytes
Acoustical Ceiling Products
Measuring Insertion Loss Pneumatic Exhaust Silencers
Processing Mixtures of Lime, Fly Ash, and Heavy Metal
Wastes in Structural Fills and Other Construction
Applications
Assessing the Degree of Banding or Orientation of
Microstructures
Standard Test Method for Determining Specific Heat
Capacity by Differential Scanning Calorimetry
Fabricating and Checking Aluminum Alloy Ultrasonic
Standard Reference Blocks
Equal Arm Balances
Graduated Cylinders
Coding of Reusable Laboratory Pipets
Qualifying Charpy Verification Specimens of HeatTreated Steel
Measuring Pavement Roughness Using a Profilograph
Use of Radiochromic Film Dosimetry System
Use of a Polymethylmethacrylate Dosimetry System
Chemical Aalysis of Zinc-5 % Aluminum-Mischmetal
Alloys by ICP Emission Spectrometry
Radioactive Pathway Methodology for Release of Sites
Following Decommissioning
E 1279
E 128
E 1280
E 1281
E 1282
E 1283
E 1284
E 1285
E 1288
E 1289
E 129
E 1291
E 1292
E 1294
E 1290
E 1295
E 1297
E 1298
E 1299
E 130
E 1301
E 131
E 1310
E 1316
E 1317
E 1302
Biodegradation By a Shake-Flask Die-Away Method
Maximum Pore Diameter and Permeability of Rigid
Porous Filters for Laboratory Use
Performing the Mouse Lymphoma Assay for
Mammalian Cell Mutagenicity
Nuclear Facility Decommissioning Plans
Specifying the Chemical Compositions and Selecting
Sampling Practices and Quantitative Analysis Methods
for Metals, Ores, and Related Materials
Procurement of Computer-Integrated Manufacturing
Systems
Nosologic Standards and Guides for Construction of a
New Biomedical Nomenclature
Standard Guide for Identification of Bacteriophage
Lambda (λ) or Its DNA
Durability of Biomass Pellets
Reference Specimen for Sound Transmission Loss
Spectrographic Analysis of Therrmionic Nickel Alloys
by the Powder Technique
Conducting a Saturated Vapor Inhalation Study with
Rats
Gravity Convection and Forced Ventilation Incubators
Test Method for Pore Size Characteristics of Membrane
Filters Using Automated Liquid Porosimeter
Crack-Tip Opening Displacement (CTOD) Fracture
Toughness Measurement
Conducting Three-Brood, Renewal Toxicity Tests with
Ceriodaphnia dubia
Measuring Fast-Neutron Reaction Rates by
Radioactivation of Niobium
Standard Guide for Determination of Purity, Impurities,
and Contaminants in Biological Drug Products
Reusable Phase Change-Type Fever Thermometer for
IntermittentDetermination of Human Temperature
Designation of Shapes and Sizes of Graphite Electrodes
DEvelopment and Operation of Laboratory Proficiency
Testing Programs
Standard Terminology Relating to Molecular
Spectroscopy
Use of a Radiochromic Optical Waveguide Dosimetry
System
Standard Terminology for Nondestructive Examinations
Flammability of Marine Surface Finishes
Acute Animal Toxicity Testing of Water-Miscible
Metalworking Fluids
E 1303
E 1304
E 1306
E 1307
E 1308
E 1309
E 1311
E 1318
E 132
E 1324
C 1501
E 1312
E 1313
E 1314
E 1315
E 1322
E 1323
E 1325
E 133
E 1332
E 135
E 1326
Refractive Index Detectors Used in Liquid
Chromatography
Plane-Strain (Chevron-Notch) Fracture Toughness of
Metallic Materials
Preparation of Reactive and Refractory Metal and Alloy
Samples by Electric Arc Remelting for the
Determination of Chemical Composition
Practice for Surface Preparation and Structural Adhesive
Bonding of Precured, Nonmetallic Composite Facings to
Structural Core for Flat Shelter Panels
Identification of Polymers (Excludes Thermoset
Elastomers) in Computerized Material Property
Databases
Identification of Composite Materials in Computerized
Material Property Databases
Minimum Detectable Temperature for Thermal Imaging
Systems
Standard Specification for Highway Weigh-In-Motion
(WIM) Systems with User Requirements and Test
Methods
Poisson,s Ratio at Room Temperature
Guide for Measuring Some Electronic Characteristics of
Ultrasonic Examination Instruments
Standard Test Method for Color Stability of Building
Construction Sealants as Determined by Laboratory
Accelerated Weathering Procedures
Electromagnetic (Eddy-Current) Examination of
Ferromagnetic Cylindrical Bar Product Above the Curie
Temperature
Recommended Formats for Data Records Used in
Computerization of Mechanical Test Data for Metals
Structuring Terminological Records Relating to
Computerized Test Reporting and Materials Designation
Formats
Ultrasonic Examination of Steel with Convex
Cylindrically Curved Entry Surfaces
Selection, Training and Evaluation of Assessors for
Laboratory Accreditation Systems
Evaluating Laboratory Measurement Practices and the
Statistical Analysis of the Resulting Data
Design of Experiments
Standard Specification for Distillation Equipment
Determination of Outdoor-Indoor Transmission Class
Analytical Chemistry for Metals, Ores, and Related
Materials
Evaluating Nonconventional Microbiological Tests
E 1327
E 1328
E 1329
E 1331
E 1333
E 1334
E 1335
E 1336
E 1368
E 1402
E 1445
E 1340
E 1343
E 1337
E 1338
E 1341
E 1342
E 1344
E 1345
E 1346
E 1347
E 1348
E 1349
E 1350
Used for Enumerating Bacteria
Standard Test Method for Evaluation of Health Care
Personnel Handwash Formulations by Utilizing
Fingernail Regions
Photovoltaic Solar Energy Conversion
Verification and Use of Control Charts in
Spectrochemical Analysis
Reflectance Factor and Color by Spectrophotometry
Using Hemispherical Geometry
Determining Formaldehyde Levels from Wood Products
Under Defined Test Conduct Using a Large Chamber
Practice for Rating the Serviceability of a Building or
Building-Related Facility
Standard Test Methods for Determination of Gold in
Bullion by Cupellation
Obtaining Colorimetric Data From a Visual Display
Unit by Spectroradiometry
Practice for Visual Inspection of Asbestos Abatement
Projects
Terminology Relating to Sampling
Hazardous Potential of Chemicals
Rapid Prototyping of Computerized Systems
Molecular Weight Cutoff Evaluation of Flat Sheet
Ultrafiltration Membranes
Determining Longitudinal Peak Braking Coefficient of
Paved Surfaces Using a Standard Reference Test Tire
Identification of Metals and Alloys in Computerized
Materials Property Databases
Obtaining Spectroradiometric Data from Radiant
Sources for Colorimetry
Preservation by Freezing, Freeze-Drying, and Low
Temperature Maintenance of Bacteria, Fungi Protista,
Viruses, Genetic Elements, and Animal and Plant
Tissues
Evaluation of Fuel Ethanol Manufacturing Facilities
Reducing the Effect of Variability of Color
Measurement by Use of Multiple Measurements
Bulk Sampling, Handling, and Preparing Edible
Vegetable Oils for Sensory Evaluation
Color and Color-Difference Measurement by
Tristimulus (Filter) Colorimetry
Transmittance and Color by Spectrophotometry Using
Hemispherical Geometry
Reflectance Factor and Color by Spectrophotometry
Using Bidirectional Geometry
Testing Sheathed Thermocouples Prior to, During, and
E 1351
E 1352
E 1353
E 1354
E 1355
E 1356
E 1359
E 136
E 1358
E 1361
E 1366
E 1357
E 1360
E 1362
E 1363
E 1364
E 1367
E 1369
E 1370
E 1372
E 1390
E 1371
E 1373
After Installation
Production and Evaluation of Field Metallographic
Replicas
Cigarette Ignition Resistance of Mock-Up Upholstered
Furniture Assemblies
Cigarette Ignition Resistance of Components of
Upholstered Furniture
Heat and Visible Smoke Release Rates for Materials and
Products Using an Consumption Calorimeter
Evaluating the Predictive Capability of Fire Models
Assignment of the Glass Transition Temperatures by
Differential Scanning Calorimetric Differential Thermal
Analysis
Evaluating Capabilities of Surveying Nondestructive
Testing Agencies
Test Method for Behavior of Materials in a Vertical
Tube Furnace at 750øC
Moisture Content of Particulate Wood Fuels Using a
Microwave Oven
Guide for Correction of Interelement Effects in X-Ray
Spectrometric Analysis
Standardized Aquatic Microcosm: Fresh Water
Determining the Rate of Bioleaching of Iron From
Pyrite by Thiobacillus Ferrooxidans
Specifying Color by Using th Optical Society of
America Uniform Color Scales System
Caliberation of Non-Concentrators Photovoltaic
Secondary Reference Cells
Temperature Calibration of Thermomechanical
Analyzers
Measuring Road Roughness by Static Level Method
Conducting 10-day Static Sediment Toxicity Tests with
Marine and Estuarine Amphipods
Selecting Techniques for Treating Uncertainty and Risk
in the Economic Evaluation of Building and Building
Systems
Air Sampling Strategies for Worker and Workplace
Protection
Test Method for Conducting a 90-Day Oral Toxicity
Study in Rats
Guide for Illuminators Used for Viewing Industrial
Radiographs
Gravimetric Determination of Phosphorus in
Phosphorus -Copper Alloys or Phosphorus-CopperSilver Alloys
Conducting a Subchronic Inhalation Toxicity Study in
E 1374
E 1375
E 1376
E 1377
E 1378
E 1379
E 1384
E 1385
E 1380
E 1381
E 1382
E 1386
E 1387
E 1388
E 1389
E 139
E 1391
E 1397
E 1398
E 1392
E 1394
E 1395
E 1396
E 1399
Rats
Open Office Acoustics and Applicable ASTM Standards
Measuring the Interzone Attenuation Panels Used as
Acoustical Barriers
Measuring the Interzone Attenuation of Sound Reflected
by Wall Finishes and Furniture Panels
Laboratory Glass Kjeldahl Flasks
Laboratory Glass Multiple Neck Distilling/Boiling
Flasks
Laboratory Glass Dewar Flask
Content and Structure of the Computer-Based Patient
Record
Standard Practice for Separation and Concentration of
Ignitable Liquid Residues from Fire Debris Samples by
Steam Distillation
Color Coding of Laboratory Pipets With Multiple
Graduations 0.1 mL and Larger but Excluding
Disposable Prothrombin Micropipets
Low-Level Protocol to Tranfer Messages Between
Clinical LAboratory Instruments and Computer Systems
Determination Average Grain Size Using Semiautomatic
and Automatic Image Analysis
Standard Practice for Separation and Concentration of
Ignitable Liquid Residues from Fire Debris Samples by
Solvent Extraction
Flammable or Combustible Liquid Residues In Extracts
From Samples of Fire Debris By Gas Chromatography
Standard Practice for Sampling of Headspace Vapors
from Fire Debris Samples
Cleanup of Fire Debris Sample Extracts By Acid
Stripping
Test Methods for Conducting Creep, Creep-Rupture,
and Stress-Rupture Tests of Metallic Materials
Collection, Storage, Characterization, and Manipulation
of Sediments for Toxicological Testing
In vitro Rat Hepatocyte DNA Repair Assay
In Vivo Rat Hepatocyte DNA Repair Assay
Angle Resolved Optical Scatter Measurements on
Specular or Diffuse Surfaces
Transferring Information Between Clinical Instruments
and Computer Systems
Sensory Evaluation of Low Heat Chilies
Sensory Evaluation of Oleoresin Capsicum
Standard Test Method for Cyclic Movement and
Measuring the Minimum and Maximum Joint Widths of
Architectural Joint Systems
E 140
E 1400
E 1401
E 1403
E 1405
E 1415
E 1422
E 1404
E 1406
E 1407
E 1408
E 1409
E 141
E 1410
E 1411
E 1412
E 1413
E 1414
E 1416
E 1417
E 1418
E 1419
E 142
E 1421
E 1423
E 143
E 1440
Standard Hardness Conversion Tables for Metals
Relationship Among Brinell Hardness Vickers
Hardness, Rockwell Hardness, Superficial Hardness,
Knoop Ha
Characterization and Performance of High Dose
Radiation Dosimetry Caliberation Laboratory
Use of a Dichromate Dosimetry System
Laboratory Glass Boiling Flasks
Laboratory Glass Distillation Flasks
Conducting Static Toxicity Tests with Lemna gibba G3
Test Methods for Forensic Writing Ink Comparison
Laboratory Glass Conical Flasks
Laboratory Glass Filter Flasks
Materials Database Management
Test Method for Laboratory Measurement of the Sound
Transmission Loss of Door Panels and Door Systems
Oxygen in Titanium and Titanium Alloys by the Inert
Gas Fusion Technique
Acceptance of Evidence Based on the Results of
Probability Sampling
Specifying Data for Evaluation of Energy Used in
Residential Buildings
Qualification of Radioscopic Systems
Standard Practice for Separation of Ignitable Liquid
Residues from Fire Debris Samples by Passive
Headspace Concentration With Activated Charcoal
Separation and Concentration of Flammable or
Combustible Liquid Residues From Fire Debris Samples
By Dynamic Headspace Concentration
Standard Test Method for Airborne Sound Attenuation
Between Rooms Sharing a Common Ceiling Plenum
Radioscopic Examination of Weldments
Liquid Penetrant Examination
Visible Penetrant Examination Using the WaterWashable Process
Standard Test Method for Examination of Seamless,
Gas-Filled, Pressure Vessels Using Acoustic Emission
Controlling Quality of Radiographic Testing
Practice for Describing and Measuring Performance of
Fourier Transform Mid-Infrared (FT-MIR)
Spectrometers: Level Zero and Level One Tests
Determining the Steady State Thermal Transmittance
Fenestration Systems
Shear Modulus at Room Temperature
Acute Toxicity Test with the Rotifer Brachionus
E 1444
E 1426
E 1427
E 1429
E 1424
E 1425
E 1428
E 1430
E 1431
E 1432
E 1433
E 1434
E 1435
E 1437
E 1438
E 1439
E 144
E 1441
E 1442
E 1443
E 1446
E 1450
E 1470
E 1481
E 1493
Standard Practice for Magnetic Particle Examination
Determining the Effective Elastic Parameter for X-Ray
Diffraction Measurements of Residual Stress
Standard Guide for Selecting Test Methods to
Determine the Effectiveness of Antimicrobial Agents
and Other Chemicals for the Prevention, Inactiv
Standard Guide for Assessing the Health Hazard of
Pesticides to Applicators and Others with Potential
Exposure
Determining the Rate of Air Leakage Through Exterior
Windows, Curtain Walls, and Doors Under Specified
Pressure and Temperature Differences Across the
Specimen
Determining the Acoustical Performance of Exterior
Windows and Doors
Evaluating the Performance of Antimicrobials in or on
Polymeric Solids Against Staining by
Streptoverticillium Reticulum (A Pink Stain Organism)
Using Release Detection Devices with Underground
Storage Tanks
Dosimetry in Electron and Bremsstrahlung Irradiation
Facilities for Food Processing
Defining and Calculating Individual and Group Sensory
Thresholds from Forced Choice Data Sets of
Intermediate Size
Selection of Standards on Environmental Acoustics
Guide for Recording Mechanical Test Data of FiberReinforced Composite Materials in Databases
Handling Densified Articles of Aluminum Oxide
Reinforced with Silicon Carbide Whiskers
Handling Silicon Carbide Whiskers
Measuring Widths of Interfaces in Sputter Depth
Profiling Using SIMS
Conducting the Frog Embryo Teratogenesis AssayXenopus (Fetax)
Safe Use of Oxygen Combustion Bombs
Computed Tomography (CT) Imaging
Highway-Traffic Monitoring
Building and Accessing Material and Chemical
Databases
Chemical Analysis of Refined Gold by Direct-Current
Plasma Emission Spectroscopy
Tension Testing of Structural Alloys in Liquid Helium
Characterization of Proteins by Electrophoretic Mobility
Railing Systems and Rails for Buildings
Identification of Bacteriophage M13 or Its DNA
E 1447
E 1448
E 1449
E 145
E 1451
E 1452
E 1453
E 1454
E 1455
E 1456
E 1514
E 1515
E 1457
E 1458
E 1459
E 1461
E 1462
E 1463
E 1464
E 1465
E 1466
E 1472
E 1476
E 1477
E 1467
Standard Test Method for Determination of Hydrogen in
Titanium and Titanium Alloys by the Inert Gas Fusion
Thermal Conductivity Method
Calibration of Systems Used for Measuring Vehicular
Response to Pavement Roughness
Standard Guide for Supercritical Fluid Chromatography
Terms and Relationships
Gravity-Convection and Forced Ventillation Ovens
Disposal of Wastes Containing Silicon Carbide
Whiskers
Preparation of Calibration Solutions for
Spectrophotometric Atomic Analysis
Storage of Media That Contains Analog or Digital
Radioscopic Data
Data Fields for Computerized Transfer of Digital
Ultrasonic Testing Data
Obtaining Colorimetric Data from a Visual Display Unit
Using Tristimulus Colorimeters
Caustic Potash, Solid (Potassium Hydroxide, Solid)
Structural Standing-Seam Steel Roof Panel Systems
Test Method for Minimum Explosible Concentration of
Combustible Dusts
Standard Test Method for Measurement of Creep Crack
Growth Rates in Metals
Standard Test Method for Calibration Verification of
Laser Diffraction Particle Sizing Instruments Using
Photomask Reticles
Physical Evidence Labeling and Related Documentation
Thermal Diffusivity of Solids By the Flash Method
Standard Test Methods for Insulation Integrity and
Ground Path Continuity of Photovoltaic Modules
Conducting Static and Flow-Through Acute Toxicity
Tests With Mysids From the West Coast of the United
States
Guide for Developing Energy Monitoring Protocols for
Commercial and Institutional Buildings or Facilities
Radon Control Options for the Design and Construction
of New Low-Rise Residential Buildings
Use of Bar Codes on Specimen Tubes in the Clinical
Laboratory
Documenting Computer Software for Fire Models
Metals Identification, Grade Verification, and Sorting
Luminous Reflectance Factor of Acoustical Materials by
Use of Integrating-Sphere Reflectometers
Transferring Digital Neurophysiological Data Between
Independent Computer
E 1468
E 1469
E 147
E 1471
E 1473
E 1474
E 1475
E 1478
E 1479
E 1480
E 1482
E 1483
E 1484
E 1485
E 1486
E 1486M
E 1489
E 1491
E 1496
E 1502
E 1488
E 1490
E 1492
E 1494
E 1495
Collecting Benthic Macroinvertebrates with the Basket
Sampler
Collecting Benthic Macroinvertebrates with MultiplePlate Samplers
Apparatus for Microdetermination of Nitrogen by
Kjeldahl Method
Identification of Fibers, and Core Materials in
Computerized Material Property Database
Chemical Analysis of Nickel, Cobalt, and HighTemperature Alloys
Determining the Heat Release Rate of Upholstered
Furniture and Mattress Components or Composites
Using a Bench Scale Oxygen Consumption Calorimeter
Data Fields for Computerized Transfer of Digital
Radiological Test Data
Visual Color Evaluation of Transparent Sheet Materials
Practice for Describing and Specifying InductivelyCoupled Plasma Atomic Emission Spectrometers
Facility Management (Building-Related)
Neutaralization of Virucidal Agents in Virucidal
Efficacy Evaluations
Standard Test Method for Assessing Developmental
Toxicity in Rats and Rabbits
Formatting and Use of Material and Chemical Property
Data and Database Quality Indicators
Development of Material and Chemical Property
Database Descriptions
Determining Floor Tolerances Using Waviness, Wheel
Path and Levelness Criteria
Determining Floor Tolerances Using Waviness, Wheel
Path, and Levelness Criteria
Computing Ride Number of Roads from Longitudinal
Profile Measurements Made by an Inertial Profile
Measuring Device
Minimum Autoignition Temperature of Dust Clouds
Neutron Radiographic Dimensional Measurements
Use of Freezing-Point Cells for Reference Temperature
Statistical Procedures to Use in developing and
Applying ASTM Test Methods
Descriptive Skinfeel Analysis of Creams and Lotions
Receiving, Documenting, Storing, and Retrieving
Evidence in a Forensic Science Laboratory
Encapsulants for Spray- or Trowel-Applied Friable
Asbestos-Containing Building Materials
Acousto-Ultrasonic Assessment of Mechanical
Properties of Composites Laminates, and Bonded Joints
E 1508
E 1512
E 1497
E 1498
E 1499
E 1501
E 1503
E 1504
E 1505
E 1506
E 1507
E 1509
E 1510
E 1513
E 1520
E 1523
E 1524
E 1525
E 1511
E 1517
E 1518
E 1522
E 1537
E 1541
E 1526
Quantitative Analysis by Energy-Despersive
Spectroscopy
Standard Test Methods for Testing Bond Performance
of Bonded Anchors
Safe Use of Water-Miscible Metalworking Fluids
Conducting Sexual Reproduction Tests With Seaweeds
Selection, Evaluation, and Training of Observers
Specification for Nighttime Photometric Performance of
Retroreflective Pedestrian Markings for Visibility
Enhancement
Conducting Outdoor Sound Measurements Using a
Digital Statistical Analysis System
Reporting Mass Spectral Data in Secondary Ion Mass
Spectrometry (SIMS)
Determining SIMS Relative Sensitivity Factors from Ion
Implanted External Standards
Analysis of Acid Grade Calcium Fluoride (Fluorspar)
Describing and Specifying the Spectrometer of an
Optical Emission Direct-Reading Instrument
Standard Specification for Room Heaters, Pellet FuelBurning Type
Standard Practice for Installing Fused Silica Open
Tubular Capillary Columns in Gas Chromatographs
Standard Practice for Application of Sprayed FireResistive Materials (SFRMs)
Particle Counts Per Pound of Clay Granular Carriers and
Clay Based Pesticide Formulations
Charge Control and Charge Referencing Techniques in
X-Ray Photoelectron Spectroscopy
Saltwater Immersion and Corrosion Testing of
Photovoltaic Modules for Marine Environments
Designing Biological Tests with Sediments
Testing Conductivity Detectors Used In Liquid and Ion
Chromatography
Determining the Effectiveness of Liquid, Gel, Cream, or
Shampoo Insecticides Against Human Louse OVA
Evaluation of Physical Compatibility of Pesticides in
Aqueous Tank Mixtures by the Dynamic Shaker Method
Autoclavable Protective Coatings on Laboratory
Glassware
Fire Testing of Upholstered Furniture
Specifying and Matching Color Using the Colorcurve
System
Evaluating the Performance of Release Detection
Systems for Underground Storage Tank Systems
E 1527
E 1528
E 1529
E 1530
E 1531
E 1532
E 1533
E 1534
E 1590
E 1611
E 1637
E 1535
E 1536
E 1538
E 1539
E 154
E 1540
E 1542
E 1543
E 1544
E 1545
E 1557
E 1561
E 1563
E 1546
Environmental Site Assessments: Phase I Environmental
Site Assessment Process
Environmental Site Assessments: Transaction Screen
Process
Determining Effects of Large Hydrocarbon Pool Fires
on Structural Members and Assemblies
Evaluating the Resistance to Thermal Transmissivity of
Thin Specimens of Materials By the Guarded Heat Flow
Meter Technique
Practice for Detection of Mycoplasma Contamination of
Cell Cultures by Growth on Agarose Medium
Practice for Detection of Mycoplasma Contamination of
Cell Cultures by Use of the Bisbenzamide DNABinding Fluorochrome
Indirect Detection of Mycoplasma in Cell Culture by 4'6 Diamidino-2-2 Phenylindole (DAPI) Staining
Determination of Ash Content of Particulate Wood
Fuels
Standard Test Method for Fire Testing of Mattresses
Guide for Conducting Sediment Toxicity Tests with
Polychaetous Annelids
Structural Standing Seam Aluminium Roof Panel
Systems
Performance Evaluation of Anaerobic Digestion
Systems
Practice for Detection of Mycoplasma Contamination of
Bovine Serum by the Large Volume Method
Use of Ethanol-Chlorobenzene Dosimetry System
Use of Radiation-Sensitive Indicators
Water Vapor Retarders Used in Contact with Earth
Under Concrete Slabs, on Walls, or as Ground Cover
Use of a Radiochromic Liquid Dosimetry System
Occupational Health and Safety
Test Method for Noise Equivalent Temperature
Difference of Thermal Imaging Systems
Construction of a Stepped Block and its Use to Estimate
Errors Produced by Speed-of-Sound Measurement
Systems for Use on Solids
Test Method for Assignment of the Glass Transition
Temperature by Thermomechanical Analysis
Building Elements and Related Sitework -UNIFORMAT II
Analysis of Strain Gage Rosette Data
Conducting Static Acute Toxicity Tests with Echinoid
Embryos
Development of Fire-Hazard-Assessment Standards
E 1547
E 1548
E 1549M
E 155
E 1551
E 1552
E 1553
E 1554
E 1555
E 1556
E 1558
E 1559
E 1560
E 1562
E 1564
E 1565
E 1566
E 1567
E 1568
E 1570
E 1577
E 1584
E 1569
E 1571
E 1572
Industrial Chemicals
Preparation of Aerospace Contamination Control Plans
ESD Controlled Garments Required in Cleanrooms and
Controlled Environments for Spacecraft for NonHazardous and Hazardous Operations
Standard Reference Radiographs for Inspection of
Aluminum and Magnesium Castings
Special Purpose, Smooth-Tread Tire, Operated on Fixed
Braking Slip Continuous Friction Measuring Equipment
Determining Hafnium in Zirconium and Zirconium
Alloys Using DC Argon Plasma Spectrometer
Collection of Airborne Particulate Lead During
Abatement and Construction Activities
Determining External Air Leakage of Air Distribution
Systems by Fan Pressurization
Structural Paste Adhesive for Sandwich Panel Repair
Epoxy Resin System for Composite Skin, Honeycomb
Sandwich Panel Repair
Electrolytic Polishing of Metallographic Speciemens
Standard Test Method for Contamination Outgassing
Characteristics of Spacecraft Materials
Standard Test Method for Gravimetric Determination of
Nonvolatile Residue From Cleanroom Wipers
Guide for Conducting Acute, Chronic, and Life-Cycle
Aquatic Toxicity Tests with Polychaetous Annelids
Standard Guide for Design and Maintenance of LowTemperature Storage Facilities for Maintaining
Cryopreserved Biological Materials
Standard Guide for Inventory Control and Handling of
Biological Material Maintained at Low Temperatures
Standard Guide for Handling Hazardous Biological
Materials in Liquid Nitrogen
Biopharmaceutical Facilities Architectural Design
Considerations
Determination of Gold in Activated Carbon by Fire
Assay Gravimetry
Practice for Computed Tomographic (CT) Examination
Guide for Reporting of Ion Beam Parameters Used in
Surface Analysis
Standard Test Method for Assay of Nitric Acid
Determination of Oxygen in Tantalum Powder
Standard Practice for Electromagnetic Examination of
Ferromagnetic Steel Wire Rope
Practice for Classifying Highway Vehicles from Known
Axle Count and Spacing
E 1573
E 1574
E 1575
E 1578
E 1579
E 158
E 1580
E 1582
E 1585
E 1586
E 1587
E 1588
E 1589
E 159
E 1591
E 1592
E 1594
E 1595
E 161
E 1593
E 1596
E 1597
E 1598
E 1599
E 1600
E 1601
Evaluating Masking Sound in Open Offices Using AWeighted and One-Third Octave Band Sound Pressure
Levels
Measurement of Sound in Residential Spaces
Pressure Water Cleaning and Cutting
Laboratory Information Management Systems (LIMS)
Ensuring Data Integrity In Highly Computerized
Laboratory Operations
Fundamental Calculations to Convert Intensities into
Concentrations in Optical Emission Spectrochemical
Analysis
Surveillance of Accredited Laboratories
Standard Practice for Calibration of Temperature Scale
for Thermogravimetry
Measuring and Calculating Emittance of Architectural
Flat Glass Products Using Spectrometric Measurements
Specification for Content of Computerized Chemical
Structural Information Files or Data Sets
Chemical Analysis of Refined Nickel
Standard Guide for Gunshot Residue Analysis by
Scanning Electron Microscopy/ Energy - Dispersive
Spectroscopy
Evaluation of First Aid Antiseptic Drug Products
Standard Test Method for Hydrogen Loss of Cobalt,
Copper, Tungsten, and Iron Powders
Data for Fire Models
Structural Performance of Sheet Metal Roof and Siding
Systems by Uniform Static Air Pressure Difference
Guide for Expression of Temperature
Evaluating the Performance of Mechanical Testing
Laboratories
Standard Specification for Precision Electroformed
Sieves
Practice for Assessing the Efficacy of Air Freshener
Products in Reducing Sensorily Perceived Indoor Air
Malodor Intensity
Solar Radiation Weathering of Photovoltaic Modules
Saltwater Pressure Immersion and Temprature Testing
of Photovoltaic Modules for Marine Environments
Conducting Early Seeding Growth Tests
Corrective Action for Petroleum Releases
Chemical Analysis of Gold in Ore Processing Cyanide
Solutions by Flame Atomic Absorption
Spectrophotometry
Conducting an Interlaboratory Study to Evaluate the
E 1602
E 1603
E 1604
E 1605
E 1606
E 1607
E 1608
E 1610
E 1615
E 1619
E 1621
E 1609
E 1612
E 1613
E 1614
E 1616
E 1617
E 1618
E 162
E 1620
E 1622
E 1623
E 1624
E 1625
Performance of an Analytical Method
Construction of Solid Burning Masonry Heaters
Leakage Measurement Using the Mass Spectrometer
Leak Detector or Residual Gas Analyzer in the Hood
Mode
Behavioral Testing in Aquatic Toxicology
Standard Terminology Relating to Lead in Buildings
Electromagnetic (Eddy-Current) Examination of Copper
Redraw Rod for Electrical Purposes
Use of the Alanine-EPR Dosimetry System
Practice for Dosimetry in an X-Ray (Bremsstrahlung)
Facility for Radiation Processing
Forensic Paint Analysis and Comparison
Test Method for Iron in Trace Quantities Using the
FerroZine Method
Test Method for Chronic Oral Toxicity Study in Rats
Guide for X-Ray Emission Spectrometric Analysis
Development and Implementation of a Pollution
Prevention Program
Performed Architectural Compression Seals for
Buildings and Parking Structures
Analysis of Digested Samples for Lead by Inductively
Coupled Plasma Atomic Emission Spectrometry (ICPAES), Flame Atomic Absorption (FAAS), or Graphite
Furnace Atomic Absorption (GFAAS) Technique
Guide for Procedure for Measuring Ionizing RadiationInduced Attenuation in Silica-Based Optical Fibers and
Cables for Use in Remote Fiber-Optic Spectroscopy and
Broadband Systems
Analysis of Acetic Anhydride by Gas Chromatography
Reporting Particle Size Characterization Data
Ignitable Liquid Residues In Extracts from Fire Debris
Samples By Gas Chromatography Mass Spectrometry
Standard Test Method for Surface Flammability of
Materials Using a Radiant Heat Energy Source
Liquid Particles and Atomization
Practice for Correction of Spectral Line Overlap in
Wavelength-Dispersive X-Ray Spectrometry
Standard Test Method for Determination of Fire and
Thermal Parameters of Materials, Products, and Systems
Using an Intermediate Scale Calorimeter (IC
Chemical Fate in Site-Specific Sediment/Water
Microcosms
Determining Biodegradability of Organic Chemicals in
Semi-Continuous Activated Sludge (SCAS)
E 1633
E 1634
E 1626
E 1627
E 1628
E 1629
E 1636
E 1638
E 1631
E 1635
E 1639
E 1641
E 1655
E 1658
E 164
E 1640
E 1642
E 1643
E 1644
E 1645
E 1646
E 1647
E 1648
E 1649
E 165
Specification for Coded Values Used in the Electronic
Health Record
Guide for Performing Sputter Crater Depth
Measurements
Including Government Procurement Requirements In
ASTM Documents
Sensory Evaluation of Edible Oils and Fats
Preparing Material Safety Data Sheets to Include
Transportation and Disposal Data for the GSA
Standard Practice for Determining the Impedance of
Absolute Eddy-Current Probes
Practice for Analytically Describing Sputter-DepthProfile Interface Data by an Extended Logistic Function
Sieve Analysis
Use of Colorimetric Dosimetry Systems for Electron
Beam Dose Measurements and Dosimeter Calibrations
Reporting Imaging Data in Secondary Ion Mass
Spectrometry (SIMS)
Functional Requirements of Clinical Laboratory
Information Management Systems
Decomposition Kinetics By Thermogravimetry
Standard Practices for Infrared Multivariate Quantitative
Analysis
Expressing Conclusions of Forensic Document
Examiners
Ultrasonic Contact Examination of Weldments
Assignment of Glass Teansition Temperature By
Dynamic Mechanical Analyzer
Practice for General Techniques of Gas
Chromatography Infrared (GC/IR) Analysis
Installation of Water Vapor Retarders Used in Contact
with Earth or Granular Fill Under Concrete Slabs
Hot Plate Digestion of Dust Wipe Samples for
Determination of Lead
Standard Practice for Preparation of Dried Paint
Samples by Hotplate or Microwave Digestion for
Subsequent Lead Analysis
Water Penetration of Exterior Metal Roof Panel Systems
by Uniform Static Air Pressure Difference
Determining Contrast Sensitivity in Radioscopy
Standard Reference Radiographs for Examination of
Aluminum Fusion Welds
Practice for Dosimetry in an Electron Beam Facility for
Radiation Processing at Energies Between 300 keV and
25 MeV
Liquid Penetrant Examination
E 1782
E 1867
E 1868
E 1650
E 1651
E 1653
E 1654
E 1656
C 1450/C 1450M
E 1652
E 1657
E 1658
E 1659
E 1660
E 1661
E 1672
E 168
E 1684
E 1662
E 1663
E 1664
E 1665
E 1666
Determining Vapor Pressure by Thermal Analysis
Test Method for Temperature Calibration of Dynamic
Mechanical Analyzers
Test Method for Loss-On-Drying by Thermogravimetry
Use of a Cellulose Acetate Dosimetry System
Total Luminous Reflectance Factor by Use of 30/t
Integrating-Sphere Geometry
Guide for Specifying Dynamic Characteristics of
Optical Radiation Transmitting Fiber Waveguides
Guide for Measuring Ionizing Radiation-Induced
Spectral Changes in Optical Fibers and Cables for Use
in Remote Raman Fiber Optic Spectroscopy
Standard Guide for Classification of Automated
Pavement Condition Survey Equipment
Standard Specification for Non-Asbestos Fiber-Cement
Storm Drain Pipe
Standard Specification for Magnesium Oxide and
Aluminum Oxide Powder and Crushable Insulators
Used in the Manufacture of Metal-Sheathed Platinum
Resistance Thermometers, B
Standard Practice for Testing Variable-Wavelength
Photometric Detectors Used in Liquid Chromatography
Expressing Conclusions of Forensic Document
Examiners
Test Methods for Coating Weight and Chemical
Analysis of Zinc-Nickel Alloy Electrolytically Coated
on Steel Sheet
Classification for Serviceability of an Office Facility for
Support for Office Work
Classification for Serviceability of an Office Facility for
Meetings and Group Effectiveness
Standard Guide for Computed Tomography (CT)
System Selection
Practices for General Techniques of Infrared
Quantitative Analysis
Specification for Miniature Thermocouple Connectors
Classification for Serviceability of an Office Facility for
Sound and Visual Environment
Classification for Serviceability of an Office Facility for
Typical Office Information Technology
Classification for Serviceability of an Office Facility for
Layout and Building Factors
Classification for Serviceability of an Office Facility for
Facility Protection
Classification for Serviceability of an Office Facility for
Work Outside Normal Hours or Conditions
E 1667
E 1668
E 1669
E 167
E 1670
E 1671
E 1673
E 1674
E 1675
E 1679
E 1682
E 1683
E 1676
E 1677
E 1678
E 1680
E 1685
E 1697
E 170
E 1749
E 1686
E 1687
E 1688
E 1689
E 169
Classification for Serviceability of an Office Facility for
Image to the Public and Occupants
Classification for Serviceability of an Office Facility for
Amenities to Attract and Retain Staff
Classification for Serviceability of an Office Facility for
Location, Access and Wayfinding
Goniophotometry of Objects and Materials
Classification for Serviceability of an Office Facility for
Management of Operations and Maintenance
Classification for Serviceability of an Office Facility for
Cleanliness
Percent Suspensibility
Cardiac Sensitization Study on Dogs
Use of a Cellulose Acetate Dosimetry System
Practice for Setting the Requirements for the
Serviceability of a Building or Building-Related Facility
Modeling the Colorimetric Properties of a Visual
Display Unit
Testing the Performance of Scanning Raman
Spectrometers
Conducting a Laboratory Soil Toxicity Test with
Lumbricid Earthworm Eisenia Foetida
Air Retarder (AR) Material or System for Low-Rise
Framed Building Walls
Measuring Smoke Toxicity for Use in Fire Hazard
Analysis
Rate of Air Leakage Through Exterior Metal Roof Panel
Systems
Standard Practice for Measuring the Change in Length
of Fasteners Using the Ultrasonic Pulse-Echo Technique
Test Method for Unipolar Magnitude Estimation of
Sensory Attributes
Radiation Measurements and Dosimetry
Terminology Relating to Rigid Wall Relocatable
Shelters
Selection of Environmental Noise Measurements and
Criteria
Determining Carcinogenic Potential of Virgin Base Oils
in Metalworking Fluids
Guide for Determination of the Bioaccumulation of
Sediment-Associated Contaminants by Benthic
Invertebrates
Developing Conceptual Site Models for Contaminated
Sites
General Techniques of Ultraviolet-Visible Quantitative
Analysis
E 1690
E 1691
E 1692
E 1693
E 1694
E 1695
E 1696
E 1698
E 1699
E 1700
E 1701
E 1702
E 1703/E 1703M
E 1704
E 1705
E 1706
E 1707
E 1708
E 1709
E 171
E 1710
E 1711
E 1712
E 1713
Determination of Ethanol Extractives in Biomass
Standard Guide for Evaluation and Assessment of
Analytical Chemistry Laboratories
Classification for Serviceability of an Office Facility for
Change and Churn by Occupants
Classification for Serviceability of an Office Facility for
Protection of Occupant Assets
Classification for Serviceability of an Office Facility for
Special Facilities and Technologies
Standard Test Method for Measurement of Computed
Tomography (CT) System Performance
Field Measurement of Raised Retroreflective Pavement
Markers Using a Portable Retroreflectometer
Standard Practice for Testing Electrolytic Conductivity
Detectors (ELCD) Used in Gas Chromatography
Standard Practice for Performing Value Analysis (VA)
of Buildings and Building Systems
Classification for Serviceability of an Office Facility for
Structure and Building Envelope
Classification for Serviceability of an Office Facility for
Manageability
Practice for Dosimetry in a Gamma Irradiation Facility
for Radiation Processing
Measuring Rut-Depth of Pavement Surfaces Using a
Straightedge
Specifying Acoustical Performance of Sound-Isolating
Enclosures
Biotechnology
Test Method for Measuring the Toxicity of SedimentAssociated Contaminants with Freshwater Invertebrates
Sampling Two-Phase Geothermal Fluid for Purposes of
Cjhemical Analysis Gudie for Estmating Uncertainties
in Dosimetry for Radiation Processing
Electronic Interchange of Color and Appearance Data
Measurement of Retroreflective Signs Using a Portable
Retroreflectometer
Atmospheres for Conditioning and Testing Flexible
Barrier Materials
Measurement of Retroreflective Pavement Marking
Materials With CEN-Prescribed Geometry Using a
Portable Retroreflectometer
Measurement of Behavior During Fish Toxicity Tests
Representing Clinical Laboratory Test and Analyte
Names
Transferring Digital Waveform Data Between
Independent Computer Systems
E 1714
E 1715
E 1716
E 1717
E 1718
E 1719
E 172
E 1721
E 1724
E 1720
E 1722
E 1723
E 1725
E 1726
E 1727
E 1728
E 1729
E 1730
E 1731M
E 1732
E 1733
E 1734
E 1735
Standard Guide for Properties of a Universal Healthcare
Identifier (UHID)
Object-Oriented Model for Registration, Admitting,
Discharge, and Transfer (RADT) Functions in
Cumputer-Based Patient Record Systems
Selection and Use of Personal Protective Equipment for
Humans Working With Respirable Silicon Carbide
Whiskers
Personnel Training for Health and Safety Aspects of
Working in Environments Containing Respirable Silicon
Carbide Whiskers
Administrative and Engineering Controls for Silicon
Carbide Whisker Work Areas
Vapor Pressure of Liquids by Ebulliometry
Practice for Describing and Specifying the Excitation
Source in Emission Spectrochemical Analysis
Determination of Acid-Insoluble Residue in Biomass
Standard Guide for Testing and Certification of Metal,
Ore, and Metal-Related Reference Materials
Determining Ready, Ultimate, Biodegradability of
Organic Chemicals in a Sealed Vessel CO2 Production
Test
Registering and Maintaining Materials and Chemical
Property Data Code Lists
Recommended Formats for Data Records Used in the
Computerization of Test Data for Plastics
Standard Test Methods for Fire Tests of Fire-Resistive
Barrier Systems for Electrical System Components
Standard Practice for Preparation of Soil Samples by
Hotplate Digestion for Subsequent Lead Analysis
Practice for Field Collection of Soil Samples for Lead
Determination by Atomic Spectrometry Techniques
Practice for Field Collection of Settled Dust Samples
Using Wipe Sampling Methods for Lead Determination
by Atomic Spectrometry Techniques
Practice for Field Collection of Dried Paint Samples for
Lead Determination by Atomic Spectrometry
Techniques
Rigid Foam for Use in Shelter Sandwich Panel Cores
Gravimetric Determination of Nonvolatile Residue from
Cleanroom Gloves [Metric]
Forensic Science
Use of Lighting In Laboratory Testing
Radioscopic Examination of Castings
Test Method for Determining Relative Image Quality of
Industrial Radiographic Film Exposed to X-Radiation
E 1736
E 1738
E 1739
E 1740
E 1742
E 1744
E 175
E 1750
E 1741
E 1743
E 1745
E 1747
E 1748
E 1751
E 1752
E 1753
E 1754
E 176
E 177
E 178
E 1755
E 1756
E 1757
E 1758
from 4 to 25 MV
Standard Practice for Acousto-Ultrasonic Assessment of
Filament-Wound Pressure Vessels
Development of a Directory of Accredited Laboratories
by an Accrediting Body
Risk-Based Corrective Action Applied at Petroleum
Release Sites
Determining the Heat Release Rate and Other Fire-TestResponse Characteristics of Wallcovering Composites
Using a Cone Calorimeter
Radiographic Examination
View of Emergency Medical Care in the Computer-Bas
Patient Record
Microscopy
Use of Water Triple Point Cells
Preparation of Airborne Particulate Lead Samples
Collected During Abatement and Construction
Activities for Subsequent Analysis by Atomic
Spectrometry
Selection and Use of Portable Retroreflectometers for
the Measurement of Pavement Marking Materials
Specification for Water Vapor Retarders Used in
Contact with Soil or Granular Fill under Concrete Slabs
Purity of Carbon Dioxide Used In Supercrital Fluid
Application
Evaluating the Engagement Between Windows and
Insect Screens as an Integral System
Non-letter Designated Thermocouple Combinations
Standard Guide for Collection of Multi-Media Field
Emission and Discharge Data Associated with Glycol
Dehydration Units
Use of Qualitative Chemical Spot Test Kits for
Detection of lead in Dry Paint Films
Determination of Low Levels of Water in Liquid
Chlorine By Infrared Spectrophotometry
Terminology of Fire Standards
Use of the Terms Precision and Bias in ASTM Test
Methods
Standard Practice for Dealing With Outlying
Observations
Ash in Biomass
Determination of Total Solids in Biomass
Preparation of Biomass for Compositional Analysis
Determination of Carbohydrates in Biomass by High
Performance Liquid Chromatography
E 1759
E 1760
E 1762
E 1763
E 1768
E 1761
E 1765
E 1766
E 1767
E 1769
E 1770
E 1771
E 1772
E 1773
E 1774
E 1775
E 1776
E 1777
E 1778
E 1779
E 1780
E 1781
E 1784
E 1790
E 1792
E 1785
E 1788
Isoaspartic Acid in Proteins: Method for the
Determination of Asparagine Deamidation Products
Guide for Unrestricted Disposition of Bulk Materials
Containing Residual Amounts of Radioactilvity
Electronic Authentication of Health Care Information
Interpretation and Use of Results from Interlaboratory
Testing of Chemical Analysis Methods
Ventilatory Behavioral Toxicology Testing of Freshwate
Fish
Recommended Formats for Data Records Used in the
Computerization of Fatigue and Fracture Data of Metals
Applying Analytical Hierarchy Process (AHP) to
Multiattribute Decision Analysis of Investments Related
to Buildings and Building Systems
Determination of Effectiveness of Sterilization
Processes for Reusable Medical Devices
Specifying the Geometry of Observations and
Measurements to Characterize the Appearance of
Materials
Properties of Electronic Health Records and Record
Systems
Standard Practice for Optimization of Electrothermal
Atomic Absorption Spectrometric Equipment
Determination of Copper in Anode and Blister Copper
Particle Size Distribution of Chromatography Media by
Electric Sensing Zone Technique
Practice for Sealing Rigid Wall Tactical Shelters with
Polysulfide Based Sealants
Electromagnetic Acoustic Transducers (EMATs)
Evaluating Performance of On-Site Extraction and
Field-Portable Electrochemical or Spectrophotometric
Analysis for Lead
Development of Fire-Risk-Assessment Standards
Prioritization of Data Needs for Pavement Management
Pavement Distress
Preparing a Measurement Plan for Conducting Outdoor
Sound Measurements
Measuring Outdoor Sound Received from a Nearby
Fixed Source
Secondary Calibration of Acoustic Emission Sensors
Total Peroxides in Acrylonitrile
Standard Practice for Near Infrared Qualitative Analysis
Standard Practice for Near Infrared Qualitative Analysis
Acrylonitrile
Acidity in Acrylonitrile
E 1783
E 1786
E 1787
E 1789
E 179
E 1791
E 1793
E 1794
E 1802
E 181
E 1795
E 1796
E 1797
E 1798
E 1799
E 18
E 180
E 1800
E 1801
E 1803
E 1807
E 1808
E 1804
E 1805
Preformed Architectural Strip Seals for Buildings and
Parking Structures
Test Method for Determination of Low Levels of Water
in Liquid Chlorine by On-Line Infrared
Spectrophotometry
Anions in Caustic Soda and Caustic Potash (Sodium
Hydroxide and Potassium Hydroxide) by Ion
Chromatography
Writing Ink Identification
Selection of Geometric Conditions for Measurement of
Reflection and Transmission Properties of Materials
Transfer Standards for Reflectance Factor for NearInfrared Instruments Using Hemispherical Geometry
Standard Practice for Preparation of Aluminum Alloy
for Bonding in Foam and Beam Type Transportable
Shelters
Standard Specification for Adhesive for Bonding Foam
Cored Sandwich Panels (200°F Elevated Humidity
Service), Type II Panels
Wet Insulation Integrity Testing of Photovoltaic
Modules
Detector Caliberation and Analysis of Radionuclides
Specification for Non-Reinforced Liquid Coating
Encapsulation Products for Leaded Paint in Buildings
Selection and Use of liquid Coating Encapsulation
Products for Leaded Paint in Buildings
Specification for Reinforced Liquid Coating
Encapsulation Products for Leaded Paint in Buildings
Assessing Treatability or Biodegradability, or Both, of
Organic Chemicals in Porous Pots
Visual Inspections of Photovoltaic Modules
Test Methods for Rockwell Hardness and Rockwell
Superficial Hardness of Metallic Materials
Determining the Precision of ASTM Methods for
Analysis and Testing of Industrial Chemicals
Standard Specification for Adhesive for Bonding Foam
Cored Sandwich Panels (160°F Elevated Humidity
Service), Type I Panels
Standard Practice for Adhesive Bonding of Aluminum
Facings in Foam and Beam Type Shelters
Determining Structural Capacities of Insulated Panels
Metal Connector Plates
Designing and Conducting Visual Experiments
Performing and Reporting Cost Analysis During the
Design Phase of a Project
Fire Assay Determination of Gold in Copper
E 1806
E 1809
E 1810
E 1811
E 1812
E 1823
E 1829
E 1836
E 1813
E 1814
E 1815
E 1816
E 1817
E 1818
E 1819
E 1820
E 1822
E 1826
E 1832
E 1840
E 1821
E 1824
E 1825
E 1827
E 1828
Concentrates by Gravimetry
Sampling Steel and Iron for Determination of Chemical
Composition
Measurement of High-Visibility RetroreflectiveClothing Marking Materials Using a Portable
Retroreflectometer
Evaluating Effects of Contaminants on Odor and Taste
of Exposed Fish
Oncogenicity Study in Rats and Mice
Optimization of Flame Atomic Absorption
Spectrometric Equipment
Fatigue and Fracture Testing
Handling Specimens Prior to Surface Analysis
Building Floor Area Measurements for Facility
Management
Measuring and Reporting Probe Tip Shape in Scanning
Probe Microscopy
Computed Tomographic (CT) Examination of Castings
Standard Test Method for Classification of Film
Systems for Industrial Radiography
Ultrasonic Examinations Using Electromagnetic
Acoustic Transducer (EMAT) Techniques
Controlling Quality of Radiological Examination by
Using Representative Quality Indicators (RQIs)
Dosimetry in an Electron Beam Facility for Radiation
Processing at Energies Between 80 and 300 keV
Environmental Monitoring Plans for Decommissioning
of Nuclear Facilities
Measurement of Fracture Toughness
Fire Testing of Stacked Chairs
Standard Specification for Low Volatile Organic
Compound (VOC) Corrosion-Inhibiting Adhesive
Primer for Aluminum Alloys to Be Adhesively Bonded
Describing and Specifying a Direct-Current-Plasma
Optical Emission Spectrometer
Raman Shift Standards for Spectrometer Calibration
Determination of Carbohydrates in Biomass by Gas
Chromatography
Assignment of a Glass Transition Temperature Using
Thermomechanical Analysis Under Tension
Evaluation of Exterior Building Wall Materials,
Products, and Systems
Determining Airtightness of Buildings Using an Orifice
Blower Door
Evaluating the Performance Characteristics of
E 1830M
E 1831
E 1833
E 1834
E 1835
E 1837
E 1838
E 1839
E 184
E 186
E 1863
E 1866
E 1842
E 1844
E 1845
E 1841
E 1843
E 1847
E 1848
E 1849
E 185
E 1850
E 1851
E 1852
Qualitative Chemical Spot Test Kits for Lead in Paint
Determining Mechanical Integrity of Photovoltaic
Modules [Metric]
Preparing Certificates for Reference Materials Relating
to Chemical Composition of Metals, Ores, and Related
Materials
Sampling of Blister Copper in Cast Form for
Determination of Chemical Composition
Determination of Lead Nickel Alloys by Electrothermal
Atomic Absorption Spectrometric Method
Analysis of Nickel Alloys by Flame Atomic Absorption
Spectrometry
Reusable Medical Devices (Simulated Use Test)
Determining the Virus-Eliminating Effectiveness of
Liquid Hygienic Handwash Agents Using the
Fingerpads of Adult Volunteers
Efficacy of Slimicides for the Paper Industry--Bacterial
and Fungal Slime
Effects of High Energy Neutron Radiation on the
Mechanical Properties of Metalic Materials, E 706(IB)
Heavy-Walled (2 to 4½-in. (51 to 114-mm)) Steel
Castings
Analysis of Acrylonitrile by Gas Chromatography
Estabilishing Spectrophotometer Performance Tests
Macro-Rockwell Hardness Testing of Metallic Materials
Size 10x4-5 Smooth-Tread Friction Test Tire
Calculating Pavement Macrotexture Mean Profile Depth
Conducting Renewal Phytotoxicity Tests With
Freshwater Emergent Macrophytes
Sexual Assault Investigation, Examination, and
Evidence Collection
Practice for Statistical Analysis of Toxicity Tests
Conducted Under ASTM Guidelines
Selecting and Using Ecological Endpoints for
Contaminated Sites
Guide for Fish and Wildlife Incident Monitoring and
Reporting
Conducting Surveillance Test for Light-Water Cooled
Nuclear Power Reactor Vessels, E 706 (IF)
Guide for Selection of Resident Species as Test
Organisms for Aquatic and Sediment Toxicity Tests
Electromagnetic Shieding Effectiveness of Durable
Rigid Wall Relocatable Structures
Standard Test Method for Determination of Low Levels
of Antimony in Carbon and Low-Alloy Steel by
Electrothermal Atomic Absorption Sp
E 1853
E 1853M
E 1854
E 1855
E 1856
E 1857
E 1858
E 1859
E 1860
E 1861
E 1862
E 1865
E 1864
E 1869
E 1873
E 1875
E 1876
E 1878
E 1879
E 1877
Measuring the Presence of Planar Organic Compounds
Which Induce CYP1A, Using Reporter Gene Test
Systems
Measuring the Presence of Planar Organic Compounds
Which Induce CYP1A, Using Reporter Gene Test
Systems
Ensuring Test Consistency in Neutron-Induced
Displacement Damage of Electronic Parts
Use of 2N2222A Silicon Bipolar Transistors as Neutron
Spectrum Sensors and Displacement Damage Monitors
Evaluating Computerized Data Acquisition Systems
Used to Acquire Data from Universal Testing Machines
Selection of Cleaning Techniques for Masonry,
Concrete, and Stucco Surfaces
Standard Test Method for Determining Oxidation
Induction Time of Hydrocarbons by Differential
Scanning Calorimetry
Test Method for Friction Coefficient Measurements
Between Tire and Pavement Using a Variable Slip
Technique
Test Method for Elapsed Time Calibration Thermal
Analyzers
Guide for Use of Coal Combustion By-Products in
Structural Fills
Measuring and Compensating for Reflected
Temperatures Using Infrared Imaging Radiometers
Open-Path Fourier Transform Infrared (OP/FT-IR)
Monitoring of Gases and Vapors in Air
Evaluating Quality Systems of Organizations
Conducting Facility and Hazard Assessments for Leas in
Confidentiality, Privacy, Access,and Data Security
Principles for Health Information Including ComputerBased Patient Records
Detection of Nucleic Acid Sequences by the Polymerase
Chain Reaction Technique
Standard Test Method for Dynamic Young's Modulus,
Shear Modulus, and Poisson's Ratio by Sonic Resonance
Standard Test Method for Dynamic Young's Modulus,
Shear Modulus, and Poisson's Ratio by Impulse
Excitation of Vibration
Specification for Laboratory Glass Volumetric Flasks,
Special Use
Standard Guide for Sensory Evaluation of Beverages
Containing Alcohol
Practice for Calculating Thermal Endurance of Materials
from Thermogravimetric Decomposition Data
E 1880
E 1881
E 1883
E 1884
E 1886
E 1887
E 1888
E 1889
E 1890
E 1891
E 1892
E 1893
E 1894
E 1895
E 1896
E 1900
E 1904
E 1897
E 1898
E 1899
E 190
E 1901
Tissue Cryosection Analysis with SIMS
Guide for Cell Culture Analysis with SIMS
Assessment of an Antibacterial handwash Product by
Multiple Basin Wash Technique
Guide for General Requirements for Bodies Operationg
Assessment and Certification/Registration of Quality
Systems
Performance of Exterior Windows, Curtain Walls,
Doors, and Storm Shutters Impacted by Missile(s) and
Exposed to Cyclic Pressure Differentials
Fog Determination
Acoustic Emission Testing of Pressurized Containers
Made of Fiberglass Reinforced Plastic with Balsa Wood
Cores
Guide for Pavement Management Implementation
Guide for Validating New Area Reference Skid
Measurement Systems and Equipment
Determination of a Survival Curve for Antimicrobial
Agents Against Selected Microorganisms and
Calculation of a D-Value and Concentration Coefficient
Preparing Characterization Plans for Decommissioning
Nuclear Facilities
Selection and use of portable Radiological Survey
instruments for performing in Situ Radiological
Assessments in Support of Decommissioning
Selecting Dosimetry Systems for Application in Pulsed
X-Ray Sources
Determining Uses and Limitations of Deterministic Fire
Models
Specification for Daytime Pedestrain Visibility
Enhancement
Dosimetry in Radiation Research on Food and
Agricultural Products
Guide for General Criteria for a Supplier's Declaration
of Conformity
Measuring and Compensating for Transmittance of an
Attenuating Medium Using Infrared Imaging
Radiometers
Method for Determination of Silver in Copper
Concentrates by Flame Absorption Spectrometry
Method for Hydroxyl Groups Using Reaction with pToluenesulfonyl Isocyanate (TSI) and Potentiometric
Titration with Tetrabutylammonium Hydroxide
Guided Bend Test for Ductility of Welds
Guide for Detection and Evaluation of Discontinuities
by Contact Pulse-Echo Straight-Beam Ultrasonic
E 1902
E 1903
E 1905
E 1906
E 1907
E 1908
E 191
E 1910
E 1916
E 1911
E 1913
E 1914
E 1915
E 1917
E 1918
E 1919
E 192
E 1920
E 1921
Methods
Management of the Confidentially and Security of
Dictation, Transcription, and Transcribed Health
Records
Environmental Site Assessments: Phase II
Environmental Site Assessment Process
General Requirements for Assessm,ent and
Accreditation of Certification/Registration Bodies
General Requirements for Bodies Operating Product
Certification Systems
Standard Practices for Determining Moisture-Related
Acceptability of Concrete Floors to Receive MoistureSensitive Finishes
Sample Selection of Debris Waste from a Building
Renovation or Lead Abatement Project for Toxicity
Characteristic Leaching Procedure (TCLP) Testing for
Leachable Lead (Pb)
Apparatus for Microdetermination of Carbon and
Hydrogen in Organic and Organo-Metallic Compounds
Standard Test Method for Agricultural Acidifiers and
Basic Blends
Identification and/or Segregation of Mixed Lots of
Metals
Measuring Paved Surface Frictional Properties Using
the Dynamic Friction Tester
Guide for Conducting Static, Axenic, 14-Day
Phytotoxicity Tests in Test Tubes with the Submersed
Aquatic Macrophyte, Myriophyllum sibiricum Komarov
Use of Terms Relating to the Development and
Evaluation of Methods for Chemical Analysis
Test Methods for Analysis of Metal Bearing Ores and
Related Materials by Combustion Infrared Absorption
Spectrometry
Determination of Phosphorus in Nickel, Ferronickel, and
Nickel Alloys by Phosphovanadomolybdate Molecular
Absorption Spectrometric Method
Measuring Solar Reflectance of Horizontal and LowSloped Surfaces in the Field
Guide for Worldwide Published Standards Relating to
Particle and Spray Characterization
Reference Radiographs for Investment Steel Castings of
Aerospace Applications
Guide for Metallographic Preparation of Thermal
Sprayed Coatings
Test Method for Determination of Reference
Temperature To, for Ferritic Steels in the Transition
E 1922
E 1923
E 1924
E 1925
E 1927
E 1931
E 1932
E 1935
E 1926
E 1928
E 1929
E 193
E 1930
E 1933
E 1934
E 1936
E 1937
E 1938
E 1939
E 194
E 1940
E 1941
E 1945
E 1946
E 1948
E 1950
E 1942
Range
Test Method for Translaminar Fracture Toughness of
Laminated Polymer Matrix Composite Materials
Guide for Sampling Terrestrial and wetlands Vegetation
Guide for Conducting Toxicity Tests with
Bioluminescent Dinoflagellates
Specification for Engineering and Design Criteria for
Rigid Wall Relocatable Structures
Conducting Subjective Pavement Ride Quality Ratings
Guide for X-Ray Compton Scatter Tomography
Guide for Acoustic Emission Examination of Small
Parts
Method for Calibrating and Measuring CT Density
Computing International Roughness Index of Roads
from Longitudinal Profile Measurements
Practice for Estimating the Approximate Residual
Circumferential Stress in Straight Thin-walled Tubing
Practice for Assessment of Certification Programs for
Environmental Professionals: Accreditation Criteria
Micropipets
Examination of Liquid-Filled Atmospheric and LowPressure Metal Storage Tanks Using Acoustic Emission
Test Methods for Measuring and Compensating for
Emissivity Using Infrared Imaging Radiometers
Guide for Examining Electrical and Mechanical
Equipment with Infrared Thermography
Reference Radiograph for Evaluating the Performance
of Radiographic Digitization Systems
Method for Determination of Nitrogen in Titanium and
Titanium Alloys by the Inert Gas Fusion Technique
Method for Determination of Titanium in Nickel Alloys
by Diantipyrylmethane Molecular Absorption
Spectrometric Method
Practice for Blood Irradiation Dosimetry
Acid-Insoluble Content of Copper and Iron Powders
Irradiation of Insects for Sterile Release Programs
Method for Determination of Carbon in Refractory and
Reactive Metals and Their Alloys
Percent Dispersibility
Measuring Cost Risk of Buildings and Building Systems
Guide for Analytical Data Interchange Protocol for
Chromatographic Data
Practice for Reporting Results from Methods of
Chemical Analysis
Guide for Evaluating Data Acquisition Systems Used in
E 1943
E 1944
E 1947
E 1949
E 1951
E 1953
E 1954
E 1955
E 1956
E 1957
E 1958
E 1959
E 196
E 1960
E 1961
E 1964
E 1966
E 1968
E 1962
E 1965
E 1967
E 1969
E 1970
E 1971
Cylic Fatigue and Fracture Mechanics Testing
Guide for Remediation of Ground Water by Natural
Attenuation at Petroleum Release Sites
Practice for Describing and Measuring Performance of
Laboratory Fourier Transform Near-Infrared (FT-NIR)
Spectrometers: Level Zero and Level One Tests
Specification for Analytical Data Interchange Protocol
for Chromatographic Data
Ambient Temperature Fatigue Life of Metallic Bonded
Resistance Strain Gages
Calibrating Reticles and Light Microscope
Magnifications
Description of Thermal Analysis Apparatus
Conduct of Research in Psychophysiological Detection
of Deception (Polygraph)
Soundness of Welds in Steel by Comparison to Graded
ASTM E 390 Reference Radiographs
Use of Thermoluminescence-Dosimetry (TLD) Systems
for Radiation Processing
Using Pneumatic Tubing for Roadway Traffic Counters
and Classifiers
Sensory Claim Substantiation
Guide for Requests for Proposals Regarding Medical
Transcription Services for Healthcare Institutions
Standard Practice for Gravity Load Testing of Floors
and Low Slope Roofs
Calculating International Friction Index of a Pavement
Surface
Mechanized Ultrasonic Examination of Girth Welds
Using Zonal Discrimination with Focused Search Units
Compiling and Writing & Terminology
Fire-Resistive Joint Systems
Microcrystal Testing in the Forensic Analysis of
Cocaine
Ultrasonic Surface Examinations Using Electromagnetic
Acoustic Transducer (EMAT) Techniques
Infrared Thermometers for Intermittent Determination of
Patient Temperature
Automated Determination of Refractive Index of Glass
Samples Using the Oil Immersion Method and a Phase
Contrast Microscope
Standard Guide for Microcrystal Testing in the Forensic
Analysis of Methamphetamine and Amphetamine
Statistical Treatment of Thermoanalytical Data
Stewardship for the Cleaning of Commerical and
Industrial Buildings
E 1972
E 1973
E 1974
E 1975
E 1976
E 1978
E 1979
E 1980
E 1981
E 1983
E 1984
E 1985
E 1986
E 1982
E 1987
E 1988
E 1989
E 1990
E 1991
E 1993
E 1994
E 1997
E 1998
E 1999
E 200
Minimizing Effects of Aerosols in the Wet Metal
Removal Environment
Practice for Collection of Surface Dust by Air Sampling
Pump Vacuum Technique for Subsequent Lead
Determination
Standard Specification for Shelter, Electrical, Equipment
S-250/G
Standard Specification for Shelter, Electrical, Equipment
S-280/G
Standard Specification for Shelter, Tactical,
Nonexpandable
Standard Specification for Shelter, Tactical, Expandable,
Two-Side
Ultrasonic Extraction of Paint, Dust, Soil, and Air
Samples for Subsequent Determination of Lead
Standard Practice for Calculating Solar Reflectance
Index of Horizontal and Low-Sloped Opaque Surfaces
Assessing the Thermal Stability of Materials by
Methods of Accelerating Rate Calorimetry
Assessment of Wetland Functions
Process of Sustainable Brownfields Redevelopment
User Authentication and Authorization
Information Access Privileges to Health Information
Open-Path Fourier Transform Infrared (OP/FT-IR)
Monitoring of Gases and Vapors in Air
Individual Rights Regarding Health Information
Training of Persons who have Access to Health
Information
Laboratory Equipment Control Interface (LECIS)
Performing Evaluations of Underground Storage Tank
Systems for Operational Conformance with 40 CFR,
Part 280 Regulations
Environmental Life Cycle Assessment of Building
Materials/Products
Bituminous Water Vapor Retarders Used in Contact
with Soil or Granular Fill Under Concrete Slabs
Standard Practice for Use of Process Oriented AOQL
and LTPD Sampling Plans
Selection of Spacecraft Materials
Assessing Depressurization-Induced Backdrafting and
Spillage from Vented Combustion Appliances
Analysis of Cast Iron Using Optical Emission
Spectrometry
Preparation, Standardization, and Storage of Standard
and Reagent Solutions for Chemical Analysis
E 2000
E 2001
E 2002
E 2003M
E 2004
E 2006
E 2007
E 2005
E 201
E 202
E 203
E 204
E 205
E 207
E 208
E 209
E 21
E 213
E 220
E 223
E 224
E 210
E 211
E 214
E 215
E 219
Minimum Basic Education and Training of Individuals
Involved in the Detection of Deception (PDD)
Resonant Ultrasound Spectroscopy for Defect Detection
in Both Metallic and Non-metallic Parts
Determining Total Image Unsharpness in Radiology
Fabrication of the Neutron Radiographic Beam Purity
Indicators
Facing Cleavage of Sandwich Panels
Benchmark Testing of Light Water Reactor Calculations
Guide for Computed Radiology (Photostimulable
Luminescence (PSL) Method)
Benchmark Testing of Reactor Dosimetry in Standard
and Reference Neutron Fields
Calculation of Volume and Weight of Industrial
Chemical Liquids
Standard Test Methods for Analysis of Ethylene Glycols
and Propylene Glycols
Water Using Karl Fischer Reagent
Identification of Material by Infrared Absorption
Spectroscopy Using the ASTM Coded Band and
Chemical Classification Index
Glass and Oxygen Combustion Flask
Thermal EMF Test of Single Thermoelement Materials
by Comparison with a Reference Thermoelement of
Similar EMF-Temperature Properties
Conducting Drop-Weight Test to Determine NilDuctilly Trasition, Temperature of Ferritic Steels
Practice for Compression Tests of Metallic Materials at
Elevated Temperatures with Conventional or Rapid
Heating Rates and Strain Rates
Elevated Temperature Tension Tests for Metallic
Materials
Ultrasonic Examination of Metal Pipe and Tubing
Calibration of Thermocouples by Comparison
Techniques
Analysis of Sulfuric Acid
Analysis of Hydrochloric Acid
Microscopic Objective Thread
Cover Glasses and Glass Slides for Use in Microscopy
Standard Practice for Immersed Ultrasonic Examination
by the Reflection Method Using Pulsed Longitudinal
Waves
Standardizing Equipment for Electromagnetic
Examination of Seamless Aluminum-Alloy Tube
Atom Percent Fission in Uranium Fuel (radiochemical
E 222
E 227
E 228
E 229
E 23
E 234
E 241
E 250
E 253
E 230
E 235
E 236
E 237
E 238
E 242
E 243
E 244
E 246
E 257
E 260
E 247
E 248
E 251
E 252
E 255
Method)
Standard Test Methods for Hydroxyl Groups Using
Acetic Anhydride Acetylation
Optical Emission Spectrometric Analysis of Aluminum
and Aluminum Alloys by the Point-to-Plane Technique
Linear Thermal Expansion of Solid Materials with a
Viterous Silica Dilatometer
Shear Strength and Shear Modulus of Structural
Adhesives
Standard Test Methods for Notched Bar Impact Testing
of Metallic Materials
Total Bromine Number of Unsturated Aliphatic
Chemicals
Guide for Limiting Water-Induced Damage to Buildings
USE OF CODEN
Terminology Relating to Sensory Evaluation of
Materials and Products
Standardized Thermocouples
Thermocouples, Sheathed, Type K, for Nuclear or for
Other High-Reliability Applications
Apparatus for Microdetermination of Alkoxyl Groups
Microvolumetric Vessels (Volumetric Flasks and
Centrifuge Tubes)
Pin-Type Beating Test of Metallic Materials
Reference Radiographs for Appearances of
Radiographic Images as Certain Parameters Are
Changed
Electromagnetic (Eddy-Current) Examination of Copper
and Copper-Alloy Tubes
Atom Percent Fission in Uranium and Plutonium Fuel
(Mass Spectrometric Method)
Total Iron in Iron Ores by Hydrogen Sulfide Reduction
and Dichromate Titration
Sulfur in Organic Compounds by Sodium Peroxide
Bomb Ignition
Standard Practice for Packed Column Gas
Chromatography
Determination of Silica in Manganese Ores, Iron Ores,
and Related Materials by Gravimetry
Manganese in Manganese Ore by the Pyrophosphate
Complexed Permanganate Potentiometric Titration
Performance Characteristics of Metallic Bonded
Resistance Strain Gages
Thickness of Thin Foil and Film by Weighing
Sampling Copper and Copper Alloys for the
E 256
E 258
E 259
E 262
E 278
E 284
E 290
E 261
E 294
E 263
E 264
E 265
E 266
E 267
E 271
E 272
E 273
E 274
E 275
E 295
E 296
E 298
E 336
E 276
Determination of Chemical Composition
Chlorine in Organic Compounds by Sodium Peroxide
Bomb Ignition
Total Nitrogen in Organic Materials by Modified
Kjeldahl Method
Preparation of Pressed Powder White Reflectance Factor
Transfer Standards for Hemispherical and Bi-Directional
Geometries
Determining Thermal Neutron Reaction and Fluence
Rates by Radioactivation Techniques
Phosphorus in Iron Ores (Titrimetric)
Terminology of Appearance
Bend Testing Material for Ductility
Determining Neutron Fluence , Fluence Rate and
Spectra by Radioactivation Techniques
Test Method for Effective Pumping Speed of Vacuum
Chamber Systems
Measuring Fast-Neutron Reaction Rates by
Radioactivation of Iron
Measuring Fast-Neutron Reaction Rates by
Radioactivation of Nickel
Measuring Reaction Rates and Fast-Neutron Fluences
by Radioactivation of Sulfur-32
Measuring Fast-Neutron Reaction Rates by
Radioactivation of Aluminum
Standard Test Method for Uranium and Plutonium
Concentrations and Isotopic Abundances
Analysis of Aqueous Hydrofluoric Acid
Reference Radiographs for High-Strength Copper-Base
and Nickel-Copper Alloy Castings
Ultrasonic Examination of Longitudinal Welded Pipe
and Tubing
Skid Resistance of Paved Surfaces Using a Full-Scale
Tire
Practice for Describing and Measuring Performance of
Ultraviolet, Visible, and Near Infrared
Spectrophotometers
Test Method for Measured Speed of Oil Diffusion
Pumps
Practice for Ionization Gage Application to Space
Simulators
Assay of Organic Peroxides
Measurement of Airborne Sound Insulation in Buildings
Particle Size or Screen Analysis at No.4 (4.75-mm)
Sieve and Finer for Metal Bearing Ores and Related
Materials
E 279
E 28
E 280
E 283
E 285
E 287
E 288
E 29
E 289
E 291
E 349
E 378
E 382
E 292
E 299
E3
E 300
E 301
E 302
E 303
E 305
E 307
E 310
E 314
E 315
E 334
E 308
E 309
E 312
Abrasion Resistance of Iron Ore Pellets and Sinter
byTumbler Test
Test Methods for Softening Point of Resins Derived
from Naval Stores by Ring-and-Ball Apparatus
Heavy-Walled (4½ to 12-in. (114 to 305-mm)) Steel
Castings
Determining the Rate of Air Leakage Through
Windows, Curtain Walls, and Doors Under Specified
Pressure Differences Across the Specimen
Oxyacetylene Ablation Testing of Thermal Insulation
Materials
Burets
Volumetric Flasks
Practice for Using Significant Digits in Test Data to
Determine Conformance with Specifications
Linear Thermal Expansion of Rigid Solids with
Interferometry
Chemical Analysis of Caustic Soda and Caustic Potash
(Sodium Hydroxide and Potassium Hydroxide)
Standard Terminology Relating to Space Simulation
Spectrographic Analysis of Silver by the Powder
Technique
Crushing Strength of Iron Ore Pellets
Conducting Time-for-Rupture Notch Tension Tests of
Materials
Trace Amounts of Peroxides in Organic Solvents
Preparation of Metallographic Specimens
Sampling Industrial Chemicals
Total Acidity of Organic Acids
Testing Monobasic Acids
Measuring Surface Frictional Properties Using the
British Pendulum Tester
Establishing and Controlling Spectrochemical
Analytical Curves
Normal Spectral Emittance at Elevated Temperatures
Reference Radiographs for Tin Bronze Castings
Standard Test Methods for Manganese in Iron Ores
Test Methods for Chemical Analysis of Molybdenum
Standard Practice for General Techniques of Infrared
Microanalysis
Computing the Colors of Objects by Using the CIE
System
Eddy-Current Examination of Steel Tubular Products
Using Magnetic Saturation
Description and Selection of Conditions for
E 313
E 316
E 317
E 318
E 319
E 32
E 321
E 384
E 774
E 322
E 323
E 324
E 326
E 328
E 329
E 330
E 331
E 335
E 337
E 340
E 344
E 345
E 338
Photographing Specimens
Standard Practice for Calculating Yellowness and
Whiteness Indices from Instrumentally Measured Color
Coordinates
Standard Test Method for Determination of Iron in
Manganese Ores by Hydrogen Sulfide ReductionDichromate Titration
Standard Practice for Evaluating Performance
Characteristics of Ultrasonic Pulse-Echo Examination
Instruments and Systems Without the Use of Electronic
Uranium in Aqueous Solutions by Colorimetry
Evaluation of Single-Pan Mechanical Balances
Standard Practices for Sampling Ferroalloys and Steel
Additives for Determination of Chemical Composition
Atom Percent Fission in Uranium and Plutonium Fuel
(Neodimium-148 Method)
Standard Test Method for Microindentation Hardness of
Materials
Classification of the Durability of Sealed Insulating
Glass Units
X-ray Emission Spectrometric Analysis of Low-Alloy
Steels and Cast Irons
Standard Specification for Perforated-Plate Sieves for
Testing Purposes
Relative Initial and Final Melting Points and the Melting
Range of Organic Chemicals
Hydroxyl Groups by Phthalic Anhydride Esterification
Stress Relaxation for Materials and Structures
Standard Specification for Agencies Engaged in the
Testing and/or Inspection of Materials Used in
Construction
Structural Performance of Exterior Windows, Curtain
Walls, and Doors by Uniform Static Air Pressure
Difference
Standard Test Method for Water Penetration of Exterior
Windows, Skylights, Doors, and Curtain Walls by
Uniform Static Air Pressure Difference
Hydroxyl Groups by Pyromellitic Dianhydride
Esterification
Measuring Humidity with a Psychrometer (the
Measurement of Wet- and Dry-Bulb Temperatures)
Test Method for Macroetching Metals and Alloys
Thermometry and Hydrometry
Tension Testing of Metallic Foil
Sharp-Notch Tension Testing of High-Strength Sheet
Materials
E 34
E 341
E 347
E 348
E 359
E 342
E 343
E 35
E 350
E 361
E 351
E 352
E 353
E 354
E 355
E 356
E 357
E 358
E 360
E 362
E 363
E 364
E 37
E 371
E 365
Chemical Analysis of Aluminum and Aluminum Base
Alloys
Measuring Plasma Arc Gas Enthalpy by Energy Balance
Ash in Polybasic Acids
Man-Rated Space Facilities
Test Methods for Analysis of Soda Ash (Sodium
Carbonate)
Chromium Oxide in Chrome Ores
Measuring Reaction Rates by Analysis of Molybdenum99 Radioactivity from Fission dosimeters
Chemical Analysis of Magnesium and Magnesium
Alloys
Chemical Analysis of Carbon Steel, Low-Alloy Steel,
Silicon Electrical Steel, Ingot Iron, and Wrought Iron
Test Methods for the Determination of Arsenic and Lead
in Ferromanganese
Standard Test Methods for Chemical Analysis of Cast
Iron - All Types
Standard Test Methods for Chemical Analysis of Tool
Steels and Other Similar Medium- and High-Alloy
Steels
Standard Test Methods for Chemical Analysis of
Stainless, Heat-Resisting, Maraging, and Other Similar
Chromium-Nickel-Iron Alloys
Standard Test Methods for Chemical Analysis of HighTemperature, Electrical, Magnetic, and Other Similar
Iron, Nickel, and Cobalt Alloys
Standard Practice for Gas Chromatography Terms and
Relationships
Describing and Specifying the Spectrograph
Phosphorus in Organic Compounds by Sodium Peroxide
Bomb Ignition
Analysis of Phosphoric Acid
Standard Test Methods for Chemical Analysis of Silicon
and Ferrosilicon
Test Methods for the Determination of Arsenic and Lead
in Silicomanganese and Ferrosilicon Manganese
Chemical Analysis of Chromium and Ferrochromium
Chemical Analysis of ferrochrome-silicon
Standard Test Methods for Chemical Analysis of Pig
Lead
Standard Test Method for the Determination of Boron in
Ferroboron
Test Method for the Determination of Vanadium in
Ferrovanadium and Vanadium Alloying Additives
E 367
E 372
E 381
E 386
E 394
E 376
E 377
E 385
E 387
E 388
E 399
E4
E 389
E 390
E 393
E 395
E 396
E 400
E 402
E 404
E 405
E 409
E 422
E 437
Chemical Analysis of Ferrocolumbium
Standard Test Method for Determination of Calcium and
Magnesium in Magnesium Ferrosilicon
Standard Method of Macroetch Testing Steel Bars,
Billets, Blooms, and Forgings
Practice for Data Presentation Relating to HighResolution Nuclear Magnetic Resonance (NMR)
Spectroscopy
Test Method for Iron in Trace Quantities Using the 1,10Phenanthroline Method
Measuring Coating Thickness by Magnetic-Field or
Eddy-Current (Electromagnetic) Test Methods
Internal Temperature Measurements in LowConductivity Materials
for Oxygen Content Using a 14-MeV Neutron
Activation and Direct-Counting Technique
Estimating Stray Radiant Power Ratio of
Spectrophotometers by the Opaque Filter Method
Spectral Bandwidth and Wavelength Accuracy of
Flurescence Spectrometers
Plane-Strain Fracture Toughness of Metallic Materials
Standard Practices for Force Verification of Testing
Machines
Particle Size or Screen Analysis at No. 4 (4.75-mm)
Sieve and Coarser for Metal Bearing Ores and Related
Materials
Steel Fusion Welds
Measuring Reaction Rates by Analysis of Barium-140
from Fission Dosimeters
Determination of Total Sulfur in Iron Ores and Related
Materials by Combustion-Iodate Titration
Chemical Analysis of Cadmium
Analysis of Ores, Minerals, and Rocks by the Fire Assay
Preconcentration Optical Emission Spectroscopy
Spectrographic Analysis of Uranium Oxide (U3O8) by
Gallium Oxide-Carrier Technique
Standard Test Method for Spectrographic Determination
of Boron In Carbon and LowAlloy Steel by the PointTo-Plane Technique
Wear Testing Rotary Operators for Windows
Practice for Description and Performance of the
Microphotometer
Test Method for Measuring Heat Flux Using a WaterCooled Calorimeter
Industrial Wire Cloth and Screens (Square Opening
Series)
E 407
E 41
E 410
E 406
E 408
E 411
E 413
E 415
E 416
E 423
E 438
E 439
E 424
E 426
E 427
E 428
E 430
E 431
E 432
E 433
E 434
E 449
E 758
E 766
E 436
E 444
E 445/E 445M
Microetching Metals and Alloys
Conditioning
Moisture and Residue in Liquid Chlorine
Using Controlled Atmospheres in Spectrochemical
Analysis
Total Normal Emittance of Surfaces Using InspectionMeter Techniques
Standard Test Method for Trace Quantities of Carbonyl
Compounds with 2,4-Dinitrophenylhydrazine
Rating Sound Insulation
Test Method for Optical Emission Vacuum
Spectrometric Analysis of Carbon and Low-Alloy Steel
Planning and Safe Operation of a Spectrochemical
Laboratory
Normal Spectral Emittance at Elevated Temperatures of
Nonconducting Specimens
Standard Specification for Glasses in Laboratory
Apparatus
Chemical Analysis of Beryllium
Solar Energy Transmittance and Reflactance
(Terrestrial) of Sheet Materials
Electromagnetic (Eddy-Current) Examination of
Seamless and Welded Tubular Products, Austenitic
Stainless Steel and Similar Alloys
Testing for Leaks Using the Halogen Leak Detector
(Alkali-Ion Diode)
Standard Practice for Fabrication and Control of Steel
Reference Blocks Used in Ultrasonic Examination
Measurement of Gloss of High-Gloss Surfaces by
Goniophotometry
Interpretation of Radiographs of Semiconductors and
Related Devices
Selection of a Leak Testing Method
Liquid Penetrant Inspection
Calorimetric Determination of Hemispherical Emittance
and the Ratio of Solar Absorptance to Hemispherical
Emittance Using Solar Simulation
Analysis of Calcium Chloride
Mammalian Acute Percutaneous Toxicity
Calibrating the Magnification of a Scanning Electron
Microscope
Drop-Weight Tear TEsts of Ferritic Steeels
Descriptions of Scopes of Work Relating to Forensic
Sciences for Questioned Document Area
Stopping Distance on Paved Surfaces Using a Passenger
E 446
E 447
E 448
E 45
E 452
E 453
E 459
E 463
E 454
E 455
E 456
E 457
E 458
E 460
E 465
E 466
E 467
E 468
E 473
E 487
E 490
E 475
E 477
E 471
E 476
Vehicle Equipped with Full-Scale Tires
Steel Castings Up to 2 in. (51 mm) in Thickness
Compressive Strength of Masonry Prisms
Scleroscope Hardness Testing of Metallic Materials
Determining the Inclusion Content of Steel
Calibration of Refractory Metal Thermocouples Using
an Optical Pyrometer
Examination of Fuel Element cladding Including the
determination of the Mechanical Properties
Measuring Heat Transfer Rate Using a Thin-Skin
Calorimeter
Silica in Fluorspar by the Silico-Molybdate Visible
Spectrometry
Standard Specification for Industrial Perforated Plate
and Screens (Square Opening Series)
Static Load Testing of Framed Floor or Roof Diaphragm
Constructions for Buildings
Relating to Quality and Statistics
Measuring Heat-Transfer Rate Using a Thermal
Capacitance (Slug) Calorimeter
Heat Ablation
Determining Effect of Packaging on Food and Beverage
Products During Storage
Standard Test Methods for Determination of Manganese
(IV) in Manganese Ores by Redox Titration
Conducting Force Controlled Constant Amplitude Axial
Fatigue Tests of Metallic Materials
Verification of Constant Amplitude Dynamic Forces in
an Axial Fatigue Testing System
Presentation of Constant Amplitude Fatigue Test Results
for Metallic Materials
Standard Terminology Relating to Thermal Analysis
Test Method for Constant-Temperature Stability Of
Chemical Materials
Standard Solar Constant and Zero Air Mass Solar
Spectral Irradiance Tables
Standard Test Method for Assay of Di-tert-Butyl
Peroxide Using Gas Chromatography
Test Method for Measuring Acoustical and Airflow
Performance of Duct Liner Materials and Prefabricated
Silencers
Obtaining Char Density Profile of Ablative Materials by
Machining and Weighing
Thermal Instability of Confined Condensed Phase
Systems (Confinement Test)
E 478
E 479
E 481
E 482
E 485
E 488
E 534
E 535
E 554
E 489
E 491
E 492
E 493
E 494
E 496
E 497
E 507
E 515
E 517
E 519
E 50
C 1340
E 498
E 499
E 501
Chemical Analysis of Copper Alloys
Standard Guide for Preparation of a Leak Testing
Specification
Measuring Neutron Fluence Rate by Radioactivation of
Cobalt and Silver
Application of Neutron Transport Methods for Reactor
Vessel Surveillance, E 706 (IID)
Optical Emission Vacuum SpectrometricAnalysis of
Blast Furnace Iron by the Point-to-Plane Technique
Strength of Anchors in Concrete and Masonry Elements
Chemical Analysis of Sodium Chloride
Practice for Preparation of Fire-Test-Response
Standards
Standard Guide for Use and Development of Strychnine
as an Avicide
Tensile Strength Properties of Metal Connector Plates
Solar Simulation for Thermal Balance Testing of
Spacecraft
Laboratory Measurement of Impact Sound Transmission
Through Floor-Ceiling Assemblies Using the Tapping
Machine
Leaks Using the Mass Spectrometer Leak Detector in
the Inside-Out Testing Mode
Measuring Ultrasonic Velocity in Materials
Measuring Neutron Fluence and Average Energy from
3H(d,n)4 He Neutron Generators by Radioactivation
Techniques
Installing Sound-Isolating Lightweight Partitions
Aluminum in Iron Ores by Atomic Absorption
Spectrometry
Test Method for Leaks Using Bubble Emission
Techniques
Test Method for Plastic Strain Ratio r for Sheet Metal
Standard Test Method for Diagonal Tension (Shear) in
Masonry Assemblages
Standard Practices for Apparatus, Reagents, and Safety
Considerations for Chemical Analysis of Metals, Ores,
and Related Materials
Standard Practice for Estimation of Heat Gain or Loss
Through Ceilings Under Attics Containing Radiant
Barriers by Use of a Computer Program
Leaks Using the Mass Spectrometer Leak Detector or
Residual Gas Analyzer in the Tracer Probe Mode
Leaks Using the Mass Spectrometer Leak Detector in
the Detector Probe Mode
Standard Rid Tire for Pavement Skid-Resistance Tests
E 502
E 503/E 503M
E 505
E 506
E 508
E 509
E 511
E 512
E 514
E 516
E 518
E 520
E 521
E 523
E 524
E 525
E 53
E 533
E 527
E 526
E 529
E 531
E 536
E 537
E 538
Standard Test Method for Selection and Use of ASTM
Standards for the Determination of Flash Point of
Chemicals by Closed Cup Me
Measurement of Skid Resistance on Paved Surfaces
Using a Passenger Vehicle Diagonal Braking Technique
Standard Reference Radiographs for Inspection of
Aluminum and Magnesium Die Castings
Mercury in Liquid Chlorine
Calcium and Magnesium in Iron Ores by Atomic
Absorption Spectrometry
In-Service Annealing of Light-Water Cooled Nuclear
Reactor Vessels
Measuring Heat Flux Using a Copper-Constantan
Circular Foil, Heat-Flux Gage
Practice for Combined, Simulated Space Environment
Testing of Thermal Control Materials with
Electromagnetic and Particulate Radiation
Water Penetration and Leakage Through Masonry
Standard Practice for Testing Thermal Conductivity
Detectors Used in Gas Chromatography
Flexural Bond Strength of Masonry
Practice for Describing Photomultiplier Detectors in
Emission and Absorption Spectroscopy
Neutron Radiation Damage Simulation by ChargedParticle Irradiation
Measuring Fast-Neutron Reaction Rates by
Radioactivation of Copper
Standard Smooth Tire for Pavement Skid-Resistance
Tests
Reporting Dosimetry Results on Neuclear Graphite
Determination of Copper in Unalloyed Copper by
Gravimetry
Trace Amounts of Arsenic in Inorganic Industrial
Chemicals
Numbering Metals and Alloys (UNS)
Fast Neutron Reaction Rates by Radioactivation of
Titanium
Conducting Flexural Tests on Beams and Girders for
Building Construction
Surveillance Testing of High-Temperature Nuclear
Component Materials
Chemical Analysis of Zinc and Zinc Alloys
Assessing the Thermal Stability of Chemicals by
Methods of Thermal Analysis
Mercury in Caustic Soda (Sodium Hydroxide) and
Caustic Potash (Potassium Hydroxide)
E 539
E 54
E 541
E 542
E 543
E 549
E 550
E 544
E 545
E 546
E 547
E 548
E 55
E 551
E 552
E 562
E 578
E 581
E 603
E 561
E 555
E 556
E 557
E 560
E 563
E 564
E 565
X-Ray Emission Spectrometric Analysis of 6AI-4V
Titanium Alloy
Chemical Analysis of Special Brasses and Bronezes
Standard Criteria for Agencies Engaged in System
Analysis and Compliance Assurance for Manufactured
Building
Standard Practice for Calibration of Laboratory
Volumetric Apparatus
Agencies Performing Nondestructive Testing
Preparing Field Sprayer Calibration Procedures
Preparing Granular Pesticide Ground Applicator
Calibration Procedures
Referencing Suprathreshold Odor Intensity
Test Method for Determining Image Quality in Direct
Thermal Neutron Radiographic Examination
Frost Point of Sealed Insulating Glass Units
Standard Test Method for Water Penetration of Exterior
Windows, Skylights, Doors, and Curtain Walls by
Cyclic Static Air Pressure Difference
General Criteria Used for Evaluating Laboratory
Competence
Sampling Wrought Nonferrous Metals and Alloys for
Determination of Chemical Composition
Developing Effective Bird Control Chemicals
Efficacy of Acute Mammalian Predacides
Test Method for Determining Volume Fraction by
Systematic Manual Point Count
Standard Test Method for Linearity of Fluorescence
Measuring Systems
Chemical Analysis of Manganese-Copper Alloys
Room Fire Experiments
R-Curve Determination
Determining Acute Oral LD50 for Testing Vertebrate
Control Agents
Calibrating a Wheel Force or Torquue Transducer Using
a Calibration Platform (User-Leverl)
Architectural Application and Installation of Operable
Partitions
Extrapolating Reactor Vessel Surveillance Dosimetry
Results, E 706 (IC)
Practice for Preparation and Use of an Ice-Point Bath as
a Reference Temperature
Standard Practice for Static Load Test for Shear
Resistance of Framed Walls for Buildings
Efficacy of a Single-Dose Acute Rodenticide Under
E 566
E 569
E 644
E 645
E 649
E 756
E 570
E 571
E 572
E 573
E 574
E 575
E 576
E 580
E 585/E 585M
E 587
E 589
E 577
E 579
E 582
E 588
E 590
E 592
E 593
Laboratory Conditions for Commensal Rodents
Electromagnetic (Eddy-Current) Sorting of Ferrous
Metals
Acoustic Emission Monitoring of Structures During
Controlled Stimulation
Testing Industrial Resistance Thermometers
Efficacy of Microbicides Used in Cooling Systems
Test Method for Bromine in Chlorine
Measuring Vibration-Damping Properties of Materials
Flux Leakage Examination of Ferromagnetic Steel
Tubular Products
Electromagnetic (Eddy-Current) Examination of Nickel
and Nickel Alloy Tubular Products
X-Ray Emission Spectrometric Analysis of Stainless
Steel
Internal Reflection Spectroscopy
Specification for Duplex, Base Metal Thermocouple
Wire With Glass Fiber or Silica Fiber Insulation
Practice for Reporting Data from Structural Tests of
Building Constructions, Elements, Connections, and
Assemblies
Frost Point of Sealed Insulating Glass Units in the
Vertical Position
Practice for Application of Ceiling Suspension Systems
for Acoustical Tile and Lay-in Panels in Areas
Requiring Seismic Restraint
Specification for Compacted Mineral-Insulated, MetalSheathed, Base Metal Thermocouple Cable
Ultrasonic Angle-Beam Examination by the Contact
Method
Use and Development of PA-14 Avian Stressing Agent
Dimensional Coordination of Rectilinear Building Parts
and Systems
Limit of Detection of Fluorescence of Quinine Sulfate
Minimum Ignition Energy and Quenching Distance in
Gaseous Mixtures
Detection of Large Inclusions in Bearing Quality Steel
by the Ultrasonic Method
Use and Development of Sodium Monofluoroacetate
(Compound 1080) as a Predacide
Radiography of Steel ¼ to 2 in. (6 to 51 mm) Thick with
X Rays and 1 to 6 in. (25 to 152 mm) Thick with
Cobalt-60
Efficacy of a Multiple-Dose Rodenticide Under
Laboratory Conditions
E 594
E 595
E 596
E 598
E6
E 60
E 601
E 602
E 604
E 605
E 606
E 609
E 617
E 608
E 607
E 615
E 618
E 619
E 62
E 620
E 621
E 622
E 640
E 641
E 625
E 627
E 631
Standard Practice for Testing Flame Ionization
Detectors Used in Gas or Supercritical Fluid
Chromatography
Total Mass Loss and Collected Volatile Condensable
Materials from Outgassing in a Vacuum Environment
Laboratory Measurement of the Noise Reduction of
Sound-Isolating Enclosures
Measuring Extreme Heat-Transfer Rates from HighEnergy Environments Using a Transient, Null-Point
Calorimeter
Methods of Mechanical Testing
Analysis of Metals, Ores, and Related Materials by
Molecular Absorption Spectrometry
Test Method for Comparing EMF Stability of SingleElement BAse-Metal Thermocouple Materials in Air
Sharp-Notch Tension Testing With Cylindrical
Specimens
Dynamic Tear Testing of Metallic Materials
Standard Test Methods for Thickness and Density of
Sprayed Fire-Resistive Material (SFRM) Applied to
Structural Members
Strain-Controlled Fatigue Testing
Standard Terminology Relating to Pesticides
Laboratory Weights and Precision Mass Standards
Metal-Sheathed Base-Metal Thermocouples
Optical Emission Spectrometric Analysis of Aluminium
and Aluminium Alloys by the Point-to-Plane Technique,
Nitrogen Atmosphere
Use and Development of Sodium Cyanide as a
Predacide
Evaluating Machining Performance of Ferrous Metals
Using an Automatic Screw/Bar Machine
Evaluating Foreign Odors in Paper Packaging
Chemical Analysis of Copper and Copper Alloys
(Photometric Methods)
Reporting Opinions of Technical Experts
Use of Metric (SI) Units in Building Design and
Construction
Developing Computerized Systems
Preservatives in Water-Containing Cosmetics
Methods for Testing Agricultural Hydraulic Spray
Nozzles
Training Users of Computerized Systems
Documenting Computerized Systems
Building Constructions
E 632
E 633
E 634
E 636
E 637
E 638
E 643
E 646
E 639
E 642
E 648
E 650
E 651
E 652
E 653
E 654
E 673
E 689
E 696
E 656
E 657
E 658
E 659
E 660
Developing Accelerated Tests to Aid Prediction of the
Service Life of Building Components and Materials
use of Thermocouples In Creep and Stress Rupture
Testing to 1800 F (1000) C in Air
Sampling of Zinc and Zinc Alloys for Optical Emission
Spectrometric Analysis
Conducting Supplemental Surveillance Tests for
Neuclear Power Reactor Vessels
Calculation of Stagnation Enthalpy from Heat Transfer
Theory and Experimental Measurements of StagnationPoint Heat Transfer and Pressure
Standard Test Method for Calibration of Heat Transfer
Rate Calorimeters Using a Narrow-Angle Blackbody
Radiation Facility
Standard Test Method for Ball Punch Deformation of
Metallic Sheet Material
Test Method for Tensile Strain-Hardening Exponents (nValues) of Metallic Sheet Materials
Measuring Total-Radiance Temperature of Heated
Surfaces Using a Radiation Pyrometer
Determining Application Rates and Distribution Patterns
from Aerial Application Equipment
Critical Radiant Flux of Floor-Covering Systems Using
a Radiant Heat Energy Source
Mounting Piezoelectric Acoustic Emission Sensors
Standard Guidelines for Evaluating Capabilities of
Agencies Involved in System Analysis and Compliance
Assurance for Manufact
Nonresidual Liquid Household Insecticides Against
Flying Insects
Testing Effectiveness of Aerosol and Pressurized Space
Spray Insecticides Against Flying Insects
Effectiveness of Aerosol and Pressurized Spray
Insecticides Against Cockroaches
Standard Terminology Relating to Surface Analysis
Reference Radiographs for Ductile Iron Castings
Standard Specification for Tungsten-Rhenium Alloy
Thermocouple Wire
Evaluation of Hatching Heterodera Schachtii Juveniles
Comparative Acute and Long-Term Oral or Gustatory
Avian Repellency
Efficacy of Dog Repellents Designed for Direct
Application to Garbage Bags
Standard Test Method for Autoignition Temperature of
Liquid Chemicals
Accelerated Polishing of Aggregates or Pavement
E 661
E 662
E 664
E 666
E 667
E 668
E 669
E 665
E 670
E 671
E 672
E 674
E 675
E 676
E 677
E 678
E 679
E 680
E 681
E 682
E 683
E 684
E 685
Surfaces Using a Small-Wheel, Circular Track Polishing
Machine
Performance of Wood and Wood-Based Floor and Roof
Sheathing Under Concentrated Static and Impact Loads
Specific Optical Density of Smoke Generated by Solid
Materials
Practice for the Measurement of the Apparent
Attenuation of Longitudinal Ultrasonic Waves by
Immersion Method
Calculating Absorbed Dose From Gamma or X
Radiation
Mercury-in-Glass, Maximum Self-Registering Clinical
Thermometers
Practice for Application of ThermoluminescenceDosimetry (TLD) Systems for Determining Absorbed
Dose in Radiation-Hardness Testing of Electronic
Devices
Nuclear Fuel Cycle Standards
Determining Absorbed Dose Versus Depth in Materials
Exposed to the X-Ray Output of Flash X-Ray Machines
Side Force Friction on Paved Surfaces Using the MuMeter
Maximum Permissible Thermal Residual Stress in
Annealed Glass Laboratory Apparatus
Disposable Glass Micropipets
Standard Specification for Industrial Perforated Plate
and Screens (Round Opening Series)
Interchangeable Taper-Ground Stopcocks and Stoppers
Interchangeable Taper-Ground Joints
Interchangeable Sperical Ground Joints
Evaluation of Technical Data
Determination of Odor and Taste Thresholds by a
Forced-Choice Ascending Concentration Series Method
of Limits
Drop Weight Impact Senstivity of Solid Phace
Hazardous Materials
Concentration Limits of Flammability of Chemicals
(Vapors and Gases)
Standard Practice for Liquid Chromatography Terms
and Relationships
Installation and Service of Solar Space Heating Systems
for One- and Two- Family Dwellings
Practice for Approximate Determination of Current
Density of Large-Diameter Ion Beams for Sputter Depth
Profiling of Solid Surfaces
Standard Practice for Testing Fixed-Wavelength
E 686
E 688
E 69
E 690
E 691
E 692
E 694
E 693
E 695
E 697
E 698
E7
E 703
E 709
E 755
E 70
E 701
E 702
E 704
E 705
E 706
E 707
E 708
E 710
Photometric Detectors Used in Liquid Chromatography
Evaluation of Antimicrobial Agents in Aqueous Metal
Working Fluids
Waste Glass as a Raw Material for Glass Manufacturing
Combustible Properties of Treated Wood by the FireTube Apparatus
In Situ Electromagnetic (Eddy-Current) Examination of
Nonmagnetic Heat Exchanger Tubes
Standard Practice for Conducting an Interlaboratory
Study to Determine the Precision of a Test Method
Determining the Contents of Cesium-137 in Irradiated
Neuclear Fuels by High-Resolution Gamma-Ray
Spectral Analysis
Laboratory Glass Volumetric Apparatus
Characterizing Neutron Exposures in Iron and Low
Alloy Steels in Terms of Displacements Per Atom
(DPA), E 706 (ID)
Measuring Relative Resistance of Wall, Floor, and Roof
Construction to Impact Loading
Standard Practice for Use of Electron-Capture Detectors
in Gas Chromatography
Arrhenius Kinetic Constants for Thermally Unstable
Materials
Metallography
Electromagnetic (Eddy-Current) Sorting of Nonferrous
Metals
Standard Guide for Magnetic Particle Examination
Test Method for Dicumyl Peroxide, Assay (Liquid
Chromatography)
pH of Aqueous Solutions with the Glass Electrode
Municipal Ferrous Scrap
Municipal Ferrous Scrap
Measuring Reactions Rates by Radioactivation of
Uranium-238
Measuring Reaction Rates by Radioactivation of
Neptunium-237
Light-Water Reactor Pressure Vessel Surveillance
Standards, E706 (0)
Skid Resistance Measurements Using the North
Carolina State University Variable-Speed Friction Tester
Waste Glass as a Raw Material for the Manufacture of
Glass Containers
Test Method for Comparing EMF Stabilities of BaseMetal Thermoelements in Air Using Dual,
Simultaneous, Thermal-EMF Indicators
E 711
E 712
E 713
E 714
E 72
E 715
E 716
E 717
E 720
E 721
E 722
E 723
E 724
E 725
E 726
E 727
E 728
E 729
E 73
E 731
E 732
E 733
E 736
E 738
Gross Calorific Value of Refuse-Derived Fuel by the
Bomb Calorimeter
Laboratory Screening of Metallic Containment Materials
for Use With Liquids in solar Heating and Cooling
Systems
Selection of Seales for Metric Building Drawings
Disposable Glass Serological Pipets
Building Construction
Gravity-Convection And Forced-Circulation Water
Baths
Sampling Aluminium and Aluminium Alloys for
Spectrochemical Analysis
Preparation of the Accreditation Annex of Acoustical
Test Standards
Selection and Use of Neutron-Activation Foils for
Determining Neutron Spectra Employed in RadiationHardness Testing of Electronics
Determining Neutron Energy Spectra from Neutron
Sensors for Radiation-Hardness Testing of Electronics
Characterzing Neutron Energy Fluence Spectra in Terms
of an Equivalent Monoenergetic Neutron Fluence for
Radiation- Hardness Testing of Electronics
Efficacy of Antimicrobials as Preservatives for
Aqueous-Based Products Used in the Paper Industry
(Bacterial Spoilage)
Conducting Static Acute Toxicity Tests Starting with
Embryos of of Four Species of Saltwater Bivalve
Molluscs
Sampling Granular Carriers and Granular Pesticides
Particle Size Distribution of Granular Carriers and
Granular Pesticides
Determining Bulk Density of Granular Carriers and
Granular Pesticides
Resistance to Attrition of Granular Carriers and Ganular
Pesticides
Conducting Acute Toxicity Tests on Test Materials with
Fishes, Macroinvertebrates, and Amphibians
Static Load Testing of Truss Assemblies
Selection and Acquisition of Commercially Available
Computerized Systems
Disposable Pasteur-Type Pipet
44.7-µL Disposable Glass Micropipets
Test Method for Cohesion/Adhesion of Sprayed FireResistive Materials Applied to Structural Members
Standard Test Method for Determination of Aluminum
in Iron Ores and Related Materials by Complexometric
E 74
E 734
E 739
E 740
E 741
E 744
E 745
E 746
E 747
E 748
E 749
E 75
E 750
E 751
E 753
E 754
E 757
E 759
E 76
E 760
E 761
C 1498
E 767
Titration
Standard Practice of Calibration of Force-Measuring
Instruments for Verifying the Force Indication of
Testing Machines
Disposable Glass Blood Sample Capillary Tube
(Microhematocrit)
Statistical Analysis of Linear or Linearized Stress-Life
(S-N) and Strain-Life (e-N) Fatigue Data
Fracture Testing with Surface-Crack Tension Specimens
Standard Test Method for Determining Air Change in a
Single Zone by Means of a Tracer Gas Dilution
Evaluating Solar Absorptive Materials for Thermal
Applications
Simulated Service Testing for Corrosion of Metallic
Containment Materials for Use with Heat-Transfer
Fluids in Solar Heating and Cooling Systems
Determining Relative Image Quality Response of
Industrial Radiographic Film
Design, Manufacture, and Material Grouping
Classification of Wire Image Quality Indicators (IQI)
Used for Radiology
Thermal Neutron Radiography of Materials
Acoustic Emission Monitoring During Continuous
Welding
Chemical Analysis of Copper-Nickel and CopperNickel-Zinc Alloys
Characterizing Acoustic Emission Instrumentation
Acoustic Emission Monitoring During Resistance SpotWelding
Municipal Aluminium Scrap (MAS)
Pulluot Resistance of ties and Anchors Embedded in
Masonry Mortar Joints
Efficacy of Canine Reproduction Inhibitors
Standard Test Method for Effect of Deflection on
Sprayed Fire-Resistive Material Applied to Structural
Members
Chemical Analysis of Nickel-Copper Alloys
Standard Test Method for Effect of Impact on Bonding
of Sprayed Fire-Resistive Material Applied to Structural
Members
Standard Test Method for Compressive Strength of
Sprayed Fire-Resistive Material Applied to Structural
Members
Standard Test Method for Hygroscopic Sorption
Isotherms of Building Materials
Shear Strength Properties of Metal Connector Plates
E 768
E 77
E 773
E 769
E 771
E 772
E 775
E 776
E 777
E 778
E 779
E 780
E 794
E 796
E8
E 781
E 782
E 783
E 784
E 785
E 786
E 787
E 788
E 789
E 84
F 1023
F 1024
F 1099M
E 790
E 791
Preparing and Evaluating Specimens for Automatic
Inclusion Assessment of Steel
Inspection and Verification of Thermometers
Accelerated Weathering of Sealed Insulating Glass
Units
Odor of Methanol, Ethanol, n-Propanol, and Isopropanol
Spontaneous Heating Tendency of Materials
Solar Energy Conversion
Total Sulfur in the Analysis Sample of Refuse-Derived
Fuel
Forms of Chlorine in Refuse-Derived Fuel
Carbon and Hydrogen in the Analysis Sample of
Refuse-Derived Fuel
Nitrogen in the Analysis Sample of Refuse-Derived Fuel
Determining Air Leakage Rate by Fan Pressurization
Measuring the Insulation Resistance of Sheathed
Thermocouple Material at Room Temperature
Melting and Crystallization Temperature by Thermal
Analysis
Standard Test Method for Ductility Testing of Metallic
Foil
Standard Test Methods Tension Testing of Metallic
Materials
Evauating Absorptive Solar Receiver Materials When
Exposed to Conditions Simulating Stagnation in Solar
Collectors with Cover Plates
Solar Collectors to Natural Weathering Under
Conditions Simulating Operational Mode
Field Measurement of Air Leakage Through Installed
Exterior Windows and Doors
Standard Specification for Clamps, Utility, Laboratory,
and Holders, Buret and Clamp
Crucibles, Ignition, Laboratory, Metal
Dishes, Evaporating, Platinum
Disposable Glass Micro Blood Collection Pipets
Pipet, Blood Diluting
Standard Test Method for Dust Explosions in a 1.2-Liter
Closed Cylindrical Vessel
Surface Burning Characteristics of Building Materials
Specification for Dispensers, Powdered Iced Tea
Specification for Dispensers, Dehydrated Mashed Potato
Rat Guards, Ship's
Residual Moisture in a Refuse-Derived Fuel Analysis
Sample
Calculating Refused-Derived Fuel Analysis Data from
E 792
E 793
E 795
E 797
E 798
E 799
E 800
E 814
E 819
E 83
E 833
E 801
E 802
E 803
E 805
E 807
E 808
E 81
E 806
E 809
F 1123
F 1126
F 1148
F 1197
E 810
As-Determined to Different Bases
Selection of a Clinical Laboratory Information
Management System
Heat of Fusion and Crystallization by Differential
Scanning Calorimetry
Mounting Test Specimens During Sound Absorption
Tests
Standard Practice for Measuring Thickness by Manual
Ultrasonic Pulse-Echo Contact Method
Conducting Irradiations at Accelerator-Based Neutron
Sources
Determining Data Criteria and Processing for Liquid
Drop Size Analysis
Measurement of Gases Present or Generated During
Fires
Standard Test Method for Fire Tests of ThroughPenetration Fire Stops
Trace Amounts of Arsenic in Organic Industrial
Chemicals
Standard Practice for Verification and Classification of
Extensometer
Standard Terminology of Building Economics
Controlling Quality of Radiological Examination of
Electronic Devices
Reference Radiographs for Gray Iron Castings Up to 4
1/2 in. (114 mm) in Thickness
Determining the L/D Ratio of Neutron Radiography
Beams
Identification of Instrumental Methods of Color or
Color-Difference Measurement of Materials
Metallograhic Laboratory Evaluation
Describing Retroreflection
Preparing of Quantitative Pole Figures
Carbon Tetrachloride and Chloroform in Liquid
Chlorine by Direct Injection (Gas Chromatographic
Procedure)
Measuring Photometric Characteristics of
Retroreflectors
Non-Metallic Expansion Joints
Food Cutters (Electric)
Home Playground Equipment
Standard Specification for Sliding Watertight Door
Control Systems
Coefficient of Retroreflection of Retroreflective
Sheeting
E 811
E 812
E 815
E 816
E 82
E 821
E 822
F 1198
F 1201
F 1774
F 1775
E 823
E 824
E 825
E 827
E 830
E 831
E 826
E 828
E 829
E 832
E 834
E 835/E 835M
E 837
E 839
E 840
Measuring Colorimetric Characteristics of
Retroreflectors Under Nighttime Conditions
Crack Strength of Slow-Bend Precracked Charpy
Specimens of High-Strength Metallic Materials
Calcium Fluoride in Fluorspar by Complexometric
Titration
Calibration of Secondary Reference Pyrheliometers and
Pyrheliometers for Field Use
Determining the Orientationof a Metal Crystal
Measurement of Mechanical Properties During Charged
Particle Irradiation
Determining Resistance of Solar Collectors Covers to
Hail by Impact With Propelled Ice Balls
Standard Guide for Shipboard Fire Detection Systems
Fluid Conditioner Fittings in Piping Applications Above
0°F
Climbing Mountaineering Carabiners
Labelling of Climbing and Mountaineering Equipment
Nonoperational Exposure and Inspection of a Solar
Collector
Transfer of Calibration from Reference to Field
Radiometers
Phase-Change Type Disposable Fever Thermometer for
Intermittent Determination of Human Temperature
Elemental Identification by Auger Electron
Spectroscopy
Ash in the Analysis Sample of Refuse-Derived Fuel
Test Method for Linear Thermal Expansion of Solid
Materials by Thermomechanical Analysis
Testing Homogenecity of Materials for the Development
of Reference Materials
Designating the Size of RDF-3 From its Sieve Analysis
Preparing Refue-Derived Fuel (RDF) Laboratory
Samples for Analysis
Laboratory Filter Papers
Determining Vacuum Chamber Gaseous Environment
Using a Cold Finger
Modulat Coordination of Clay and Concrete Masonry
Units
Determining Stresses by the Hole-Drilling Strain-Gage
Method
Sheathed Thermocouples and Sheathed Thermocouple
Material
Standard Practice for Using Flame Photometric
Detectors in Gas Chromatography
E 841
E 844
E 848
E 863
E 871
E 872
E 873
E 850
E 852
E 853
E 855
E 859
E 866
E 867
E 856
E 860
E 861
E 864
E 865
E 868
E 869
E 870
E 874
E 875
Copper in Iron Ores and Related Materials by Atomic
Absorption Spectroscopy
Sensor Set Design and Irradiation for Reactor
Surveillance, E 706 (IIC)
Guide for Safety and Health Requirements Relating to
Occupational Exposure to Water-insoluble Chromates
Describing Atomic Absorption Spectrometric
Equipment
Moisture Analysis of Particulate Wood Fuels
Volatile Matter in the Analysis of Particulate Wood
Fuels
Bulk Density of Densified Particulate Biomass Fuels
Use of Inorganic Process Wastes as Structural Fill
C4-C13 Plasticizer Grade Alcohols
Analysis and Interpretation of Light-water Reactor
Surveillance Results, E 706(IA)
Standard Test Methods for Bend Testing of Metallic Flat
Materials for Spring Applications Involving Static
Loading
Standard Test Method for Air Erosion of Sprayed FireResistive Materials (SFRMs) Applied to Structural
Members
Standard Specification for Corrosion-Inhibiting
Adhesive Primer for Aluminum Alloys to Be
Adhesively Bonded in Honeycomb Shelter Panels
Traveled Surface Characteristics
Definitions of Terms and Abbreviations Relating to
Physical and Chemical Characteristics of Refuse
Derived Fuel
Examining and Testing Items That are or May Become
Involved In Products Liability Litigation
Evaluating Thermal Insulation Materials for Use in
Solar Collectors
Practice for Surface Preparation of Aluminum Alloys to
Be Adhesively Bonded in Honeycomb Shelter Panels
Structural Film Adhesives for Honeycomb Sandwich
Panels
Conducting Performance Tests on Mechanical
Conveying Equipment in Resource Recovery Systems
Performance Evaluation of Fermentation Fuel
Manufacturing Facilities
Analysis of Wood Fuels
Standard Practice for Adhesive Bonding of Aluminum
Facings to Nonmetallic Honeycomb Core for Shelter
Panels
Standard Test Method for Efficacy of Fungal Control
E 876
E 8M
E 906
E 94
E 943
E 877
E 878
E 879
E 88
E 883
E 884
E 887
E 881
E 882
E 885
E 886
E 889
E 890
E 891
E 892
E 894
E 895
E 896
E 897
Agents as Preservatives for Aqueous-Based Products
Used in the Paper Industry
Use of Statistics in the Evaluation of Spectrometric Data
Standard Test Methods for Tension Testing of Metallic
Materials [Metric]
Heat and Visible Release Rates for Materials and
Products
Guide for Radiographic Examination
Terminology Relating to Biological Effects and
Environmental Fate
Sampling and Sample Preparation of Iron Ores and
Related Materials
Determination of Titanium in Iron Ores and Related
Materials by Diantiphyrylmethane Ultraviolet
Spectrometry
Thermistor Sensors for Clinical Laboratory Temperature
Measurements
Sampling Nonferrous Metals and Alloys in Cast Form
for Determination jof Chemical Composition
Reflected-Light Photomicrography
Standard Practice for Sampling Airborne
Microorganisms at Municipal Solid-Waste Processing
Facilities
Silca in Refuse-Derived Fuel (RDF) and RDF Ash
Explosure of Solar Collector Cover Materials to Natural
Weathering Under Conditions Simulating Stagnation
Mode
Accountability and Quality Control in the Chemical
Analysis Laboratory
Analyses of Metals in Refuse-Derived Fuel by Atomic
Absorption Spectroscopy
Dissolution of Refuse-Derived Fuel (RDF) Ash Samples
for Analyses of Metals
Composition or Purity of a Solid Waste Materials
Stream
Disposable Glass Culture Tubes
Terrestrial Direct Normal Solar Spectral Irradiance for
Air Mass 1.5
Terrestrial Solar Spectral Irradiance at Air Mass 1.5 for
a 37° Tilted Surface
Anchorage of Permanent Metal Railing Systems and
Rails for Buildings
Determination of Hydrolysis Rate Constants of Organic
Chemicals in Aqueous Solutions
Conducting Aqueous Direct Photolysis Tests
Volatile Matter in the Analysis Sample of Refuse-
E 898
E9
E 90
E 900
E 901
E 902
E 908
E 911
E 917
E 903
E 904
E 905
E 907
E 910
E 913
E 915
E 916
E 918
E 919
E 92
E 920
E 921
E 923
E 924
E 925
Derived Fuel
Standard Method of Testing Top-Loading, DirectReading Laboratory Scales and Balances
Standard Test Methods of Compression Testing of
Metallic Materials at Room Temperature
Laboratory Measurements of Airborne Sound
Transmission Loss of Building Partitions and Elements
Predicting Neturon Radiation Damage to Reactor Vessel
Materials, E706 (IIF)
Uranium Resources
Practice for Checking the Operating Characteristics of
X-Ray Photoelectron Spectrometers
Calibrating Gaseous Reference Leaks
Glass Stopcocks with Polytetrafluorethylene (PTFE)
Plugs
Measuring Life-Cycle Costs of Buildings and Building
Systems
Solar Absorptance, Reflectance, and Transmittance of
Materials Using Integrating Spheres
Generating All-Day Thermal Performance Data for
Solar Collectors
Determining Thermal Performance of Tracking
Concentrating Solar Collectors
Field Testing Uplift Resistance of Adhered Membrane
Roofing Systems
Application and Analysis of Helium Accumulation
Fluence Monitors for Reactor Vessel Surviellance, E
706 (IIC)
Calibration of Reference Pyranometers With Axis
Vertical by the Shading Method
Verifying the Alignment of X-Ray Diiffraction
Instrumentation for Ressidual Stress Measurement
Reporting Employee Health History Information and
Core Physical Examination Results
Determining Limits of Flammability of Chemicals At
Elevated Temperature and Pressure
Software Documentation for a Computerized System
Vickers Hardness of Metallic Materials
Commercially Packaged Laboratory Apparatus
Export Packaged Laboratory Apparatus
Glass Westergren Tube, Reusable
Quality Assurance of Laboratories Using Molecular
Spectroscopy
Periodic Calibration of Narrow Band-Pass
Spectrophotometers
E 928
E 932
E 934
E 935
E 926
E 927
E 929
E 930
E 936
E 937
E 938
E 939
E 941
E 942
E 944
E 945
E 947
E 948
E 949
E 95
E 950
E 951
E 96
E 989
Standard Test Method for Determination of Purity by
Differential Scanning Calorimetry
Describing and Measuring Performance of Dispersive
Infrared Spectrometers
Serological Pipet, Disposable Plastic
Test Methods for Performance of Permanent Metal
Railing Systems and Rails for Buildings
Preparing Refuse-Derived Fuel (RDF) Samples for
Analyses of Metals
Solar Simulation for Terrestrial Photovoltaic Testing
Measuring Electrical Energy Requirements of
Processing Equipment
Estimating the Largest Grain Observed in a
Metallographic Section (ALA Grain Size)
Roof Assemblies Employing Steel Deck, Preformed
Roof Insulation, and Built-Up Roofing
Standard Test Method for Corrosion of Steel by Sprayed
Fire-Resistive Material (SFRM) Applied to Structural
Members
Standard Test Method for Effectiveness of Liquid, Gel,
or Cream Insecticides Against Adult Human Lice
Standard Test Method of Field Testing Topical
Applications of Compounds as Repellents for Medically
Important and Pest Arthropods (Inc
Calibration of Reference Pyranometers with Axis Tilted
by the Shading Method
Simulation of Helium Effect in Irradiated Metals
Application of Neutron Spectrum Adjustment Methods
in Reactor Surveillance, (IIA)
Determination of Zinc in Zinc Ores and Concentrates by
Complexometric Titration
Sampling Single-Phase Geothemal Liquid or Steam for
Purposes of Chemical Analysis
Electrical Performance of Non-Concentrator Terrestrial
Photovoltaic Cells Using Reference Cells
Total Moisture in a Refuse-Derived Fuel Laboratory
Sample
Cell-Type Oven With Controlled Rates of Ventilation
Measuring the Longitudinal Profile of Traveled Surfaces
With an Accelerometer Established Inertial Profiling
Reference
Standard Test Methods for Laboratory Testing of NonCommercial Mosquito Repellent Formulations On the
Skin
Test Methods Water Vapor Transmission of Materials
Classification for Determination of Impact Insulation
E 991
E 953
E 954
E 955
E 956
E 957
E 958
E 959
E 960
E 961
E 963
E 964
E 965
E 966
E 967
E 968
E 969
E 970
E 971
E 972
E 974
E 976
E 977
E 973
E 973M
Class (IIC)
Measurement of Fluorescent Specimens
Fusibility of Refuse-Derived Fuel (RDF) Ash
Packaging and Shipping of Laboratory Samples of
Refuse-Derived Fuel
Thermal Characteristics of Refuse-Derived Fuel
Macrosample
Municipal-Mixed Nonferrous Metals (MNM)
Geothermal Energy
Measuring Practical Spectral Bandwidth of UltravioletVisible Spectrophotometers
Characterizing the Performance of Refuse SizeReduction Equipment
Laboratory Glass Beakers
Blood Sedimentation Tube, Wintrobe, Glass, Reusable
Standard Practice for Electrolytic Extraction of Phases
from Ni and Ni-Fe Base Superalloys Using a
Hydrochloric-Methanol Electr
Measuring Benefit-to-Cost and Savings-to-Investment
Ratios for Buildings and Building Systems
Measuring Pavement Macrotexture Depth Using a
Volumetric Technique
Field Measurement of Airborne Sound Insulation of
Building Facades and Facades and Facade Elements
Temperature Calibration of Differential Scanning
Calorimeters and Differential Thermal Analyzers
Heat Flow Calibration of Differential Scanning
Calorimeters
Volumetric (Transfer) Pipets
Critical Radiant Flux of Exposed Attic Floor Insulation
Using a Radiant Heat Energy Source
Calculation of Photometric Transmittance and
Reflectance of Materials to Solar Radiation
Standard Test Method for Solar Photometric
Transmittance of Sheet Materials Using Sunlight
Standard Guide for Specifying Thermal Performance of
Geothermal Power Systems
Standard Guide for Determining the Reproducibility of
Acoustic Emission Sensor Response
Practice for Thermoelectric Sorting of Electrically
Conductive Materials
Determination of the Spectral Mismatch Parameter
Between A Photovoltaic Device an A Photovoltaic
Reference Cell
Determination of the Spectral Mismatch Parameter
E 975
E 978
E 979
E 981
E 982
E 983
E 984
E 985
E 986
E 987
E 988
E 990
E 993
E 994
E 995
E 999
F 1019M
E 996
E 997
F1
F 1000
E 998
F 1001
F 1002
Between a Photovoltaic Device and a Photovoltaic
Reference Cell [Metric]
X-Ray Determination of Retained Austenite in Steel
with Near Random Crystallographic Orientation
Evaluating Mathematical Models for the Environmental
Fate of Chemicals
Evaluation of Antimicrobial Agents as Preservatives for
Invert Emulsion and Other Water Containing Hydraulic
Fluids
Standard Test Method for Estimating Sensory Irritancy
of Airborne Chemicals
Laboratory Glass Test Tubes
Guide for Minimizing Unwanted Electron Beam Effects
in Auger Electron Spectroscopy
Standard Guide for Identifying Chemical Effects and
Matrix Effects in Auger Electron Spectroscopy
Specification for Permanent Metal Railing Systems and
Rails for Buildings
Scanning Electron Microscope Performance
Characterization
Deglazing Force of Fenestration Products
Tungsten-Rhenium Thermocouples
Core-Splice Adhesive for Honeycomb Sandwich Shelter
Panels
Evaluation of Delayed Contact Hypersensitivity
Laboratory Accreditation Systems
Background Subtraction Techniques in Auger Electron
and X-ray Photoelectron Spectroscopy
Guide for Controlling the Quality of Industrial
Radiographic Film Processing
Standard Specification for Steel Deck Gear Stowage
Box [Metric]
Practice for Reporting Data in Auger Electron
Spectroscopy and X-ray Photoelectron Spectroscopy
Standard Test Method for Structural Performance of
Glass in Exterior Windows, Curtain Walls, and Doors
Under the Influence of Uniform Static Load
Specification for Nickel-Clad and Nickel-Plated Steel
Strip for Electron Tubes
Piping System Drawing Symbols
Structural Performance of Glass in Windows, Curtain
Walls, and Doors Under the Influence of Uniform Static
Loads by Nondestructive Method
Selection of Chemicals to Evaluate Protective Clothing
Materials
Protective Clothing for Use by Worker Exposed to
F 1003
F 1004
F 1005
F 1006
F 1007
F 1008
F 1009
F 1010
F 1011
F 1012
F 1013
F 1014
F 1015
F 1016
F 1020
F 1022
F 1030
F 1045
F 1049
F 1017
F 1018
F 1021
F 1025
F 105
Specific Molten Substances and RelTED tHERMAL
hAZARDS
Searchlights on Motor Lifeboats
Standard Consumer Safety Specification Expansion
Gates and Expandable Enclosures
HVAC Duct Shapes; Identification and Description of
Design Configuration
Entrainment Separators for Use in Marine Piping
Applications
Pipe-Line Expansion Joints of the Packed Slip Type for
Marine Application
Ecological Considerations for the Use of Chemical
Dispersants in Oil Spill Response-Salt Marshes
Ecological Considerations for the Use of Chemical
Dispersants in Oil Spill Response - Offshore
Ecological Considerations for the Use of Chemical
Dispersants in Oil Spill Response - Bird Habitats
Standard Guide for Developing a Hazardous Materials
Training Curriculum for Initial Response Personnel
Ecological considerations for the Use of Chemical
Dispersants in Oil Spill Response - the Arctic
Determining the Performance of a Liquid/Liquid
Separator System Employing a Single-Pass, ConstantRate, Non-Solids Test
Flashlights on Vessels
Standard Test Method for Relative Abrasiveness of
Synthetic Turf Playing Surfaces
Linear Tire Treadwear Data Analysis
Line-Blind Valves for Marine Applications
Specification for Chemical Sanitizing Commercial
Dishwashing Machines, Recirculated Wash, Fresh
Water Rinse Type
Selection of Valve Operators
Performance Specification for Ice Hockey Helmets
Practice for Shallow Etch Pit Detection on Silicon
Wafers
Testing Lateral Toe Release of Adult Alpine Ski
Binding Under Impact Loading
Steel Emergency Gear Stowage Locker
Feeders, Detergent, Rinse Agent, and Sanitizing Agent
for Commercial Dishwashing and Glasswashing
Machines
Selection and Use of Full-Encirclement-Type Band
Clamps for Reinforcement or Repair of Punctures or
Holes in Polyethylene Gas Pressure Pipe
Standard Specification for Type 58 Borosilicate Sealing
F 1026
F 1027
F 1029
F 1031
F 1034
F 1035
F 1037
F 1038
F 1039
F 104
F 1040
F 1041
F 1043
F 1044
F 1047
F 1048
F 1042
F 1046
F 1051
F 1052
F 1054
F 1061
F 1062
F 1053/F 1053M
F 1055
F 1056
Glass
General Workmanship and Performance Measurements
of Hemostatic Forceps
Assessment of Tissue and Cell Compatibility of
Orofacial Materials and Devices
Selection of Physical Secrity Measures for a Facility
Standard Practice for Training the Emergency Medical
Technician (Basic)
Classifying Industrial Robots
Use of Rubber-Cord Pie Disk to Demonstrate the
Discernment Capability of a Tire X-ray Imaging System
Visual Rating of Appearance of Resilient Floors After
In-Service Exposure to Foot Traffic
Motor Life Evaluation of a Canister, Head-held, Stick,
and Utility Type Vacuum Cleaner Without a Driven
Agitator
Measurement of Low Level X-Radiation Used in X-Ray
Security Screening Systems
Nonmetallic Gasket Materials
Standard Specification for Filter Units, Air
Conditioning: Viscous-Impingement and Dry Types,
Replaceable
Squeeze-Off of Polyolefin Gas Pressure Pipe and
Tubing
Standard Specification for Strength and Protective
Coatings on Metal Industrial Chain Link Fence
Framework
Test Method for Shear Testing of Calcium Phosphate
Coatings and Metallic Coatings
Frying and Braising Pans--Tilting Type
Measuring the Effective Surface Roughness of Optical
Components by Total Integrated Scattering
Estimating Toner and Dispersant Usage in Copiers
Utilizing Liquid Developers
Preparing Arficially Worn Passenger and Light Truck
Tires for Testing
Comparing Multistrike Film Ribbons
Pressure Testing Vapor Protective Ensembles
Standard Specification for Conical Fittings
Ski Binding Test Devices
Verification of Ski Binding Test Devices
Steel Hull Construction Tolerances
Electrofusion Type Polyethylene Fittings for Outside
Diameter Controlled Polyethylene Pipe and Tubing
Socket Fusion Tools for Use in Socket Fusion Joining
F 1057
F 1058
F 106
F 1060
F 1063
F 1064
F 1066
F 1075
F 1081
F 1067
F 1068
F 1072
F 1074
F 1077
F 1069
F 1070
F 1071
F 1073
F 1076
F 1078
F 1079
F 1080
F 1082
F 1083
F 1084
F 1085
Polyethylene Pipe of Tubing and Fittings
Standard Practice for Estimating the Quality of Extruded
Poly (Vinyl Chloride) (PVC) Pipe by the Heat
Reversion Technique
Wrought Cobalt-Chromium-Nickel-Molybdenum-Iron
alloy for Surgical Implant Applications
Brazing Filler Metals for Electron Devices
Standard Test Method for Thermal Protective
Performance of Materials for Protective Clothing for
Hot Surface Contact
Standard Practice for Functional Inspections and
Adjustments of Alpine Ski/Binding/Boot Systems
Sampling and Inspection of Complete and Incomplete
Alpine Ski/Boot/Binding Systems in Rental
Applications
Vinyl Composition Floor Tile
Dehumidifier, Shipboard, Mechanically Refrigerated,
Self-Contained
Competition Wrestling Mats
Determining the Performance of a Petroleum Product
Filter Cartridge Using a Single-Pass Constant Rate
Procedure
Doors, Double, Gastight/Airtight, Individually Dogged,
for Marine Use
Expanded-Metal Doors
Cleats, Welded Horn Type
Selection of Committee F-16 Fastener Specifications
Doors, Watertight, Gastight/Airtight and Weathertight,
Individually Dogged, for Marine Use
Doors, Non-Tight, for Marine Use
Expanded-Metal Bulkhead Panels
Door Fittings, for Watertight/Gastight/Airtight,
Weathertight, and Non-Tight Doors, for Marine Use
Expanded Welded and Silver Brazed Socket Joints for
Pipe and Tube
Surgical Scirrors--Inserted and Non-Inserted Blades
Inserted and Noninserted surgical Scissors
Determining the Consistency of Viscous Liquids Using
a Consistometer
Tires--Determining Precision for Test Method Standards
Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized)
Welded, for Fence Structures
Sampling Oil/Water Mixtures for Oil Spill Recovery
Equipment
Mattress and Box Springs, Berths
F 1086
F 1093
F 1098
F 1087
F 1088
F 1089
F 109
F 1091
F 1090
F 1092
F 1094
F 1095
F 1097
F 1099
F 110
F 1100
F 1101
F 1102
F 1104
F 1105
F 1106
F 1117
F 112
F 1107
F 1108
Structures and Resposibilites of Emergency Medical
Services Systems Organizations
Tensile Strength Characteristics of Oil Spill Response
Boom
Envelope Dimensions for Butterfly Valves--NPS 2 to 24
Linear Dimensional Stability of a Gasket Material to
Moisture
Beta-Tricalcium Phosphate for Surgical Implantations
Corrosion of Surgical Instruments
Surface Imperfections on Ceramic
Standard Specification for Wrought Cobalt-20
Chromium-15 Tungsten-10 Nickel Alloy Surgical
Fixation Wire [UNS R30605]
Bank and Mercantile Vault Construction
Fiberglass (GRP) Pultruded Open-Weather Storm- and
Guard-Square Handrails
Microbiological Monitoring of Water Used for
Processing Electron and Microelectronic Devices by
Direct Pressure Tap Sampling Valve and by the
Presteilized Plastic Bag Method
Rapid Enumeration of Bacteria in Electronics-Grade
Purified Water Systems by Direct-Count
Epifluorescence Microscory
Mortar, Refractory (High-Temperature, Air-Setting)
Rat Guards, Ship's
Standard Test Method for Thickness of Epitaxial or
Diffused Layers in Silicon by the Angle Lapping and
Staining Technique
Ventilators Intended for Use in Critical Care
Ventilators Intended for Use During Anesthesia
Preparation of Use and Care Booklets for Residential
Resilient Vinyl Floor Coverings
Preparing Aircraft Cleaning Compounds, Liquid Type,
Water Base, for Storage Stability Testing
Preparing Aircraft Cleaning Compounds, Liquid-Type,
Temperature-Sensitive, or Solvent-Based, for Storage
Stability Testing
Warping Heads, Rope Handling (Gypsy Head, Capstan
Head)
Dielectric Overshoe Footwear
Standard Test Method for Sealability of Enveloped
Gaskets
Terminology Relating to Snowboarding
Titanium-6 Aluminium-4 Vanadium Alloy Castings for
Surgical Implants [UNS R56406]
F 111
F 1110
F 1112
F 1113
F 1111
F 1114
F 1115
F 1116
F 1121
F 1122
F 1118
F 1119
F 1120
F 1124
F 1125
F 1127
F 1129
F 1130
F 1134
F 1135
F 1138
F 1139
F 1143
F 1136
F 1137
F 1140
Determining Barium Yield, Getter Gas Content, and
Getter Sorption Capacity for Barium Flash Getters
Sandwich Corrosion Test
Test Method for Static Testing of Tubeless Pneumatic
Tires for Rate of Loss of Inflation Pressure
Test Method for Electrochemical Measurement of
Diffusible Hydrogen in Steels (Barnacle Electrode)
Corrosion of Low-Embrittling Cadmium Plate by
Aircraft Maintenance Chemicals
Heat Sanitizing Commercial Pot, Pan, and Utensil
Station RackType Water Driven Rotary Spray
Determining the Carbon Dioxide of Beverage
Containers
Determining Dielectric Strength of Overshoe Footwear
International Shore Connections for Marine Fire
Applications
Quick Disconnect Couplings
National Air Medical Transport Units Resources
Catalog
Rotary Wing Basic Life Support Transport Units
Circular Metallic Bellows Type Expansion Joints for
Piping Applications
Rotary Wing Advanced Life Support Transport Units
Image Quality in Impact Printing Systems
Containment by Emergency Response Personnel of
Hazardous Material Spills
Using Aqueous Foams to Control the Vapor Hazard
from Immiscible Volatile Liquids
Inspecting the Coating System of a Ship
Insulation Resistance Monitor for Shipboard Electrical
Motors and Generators
Specification for Cadmium or Zinc Chromate Organic
Corrosion Protective Coating for Fasteners
Spray Shields for Mechanical Joints
Steam Traps and Drains
Manhole Cover Assembly, Bolted, Raised, Oiltight, and
Watertight
Chromium/Zinc Corrosion Protective Coatings for
Fasteners
Standard Specification for Phosphate/Oil and
Phosphate/Organic Corrosion Protective Coatings for
Fasteners
Test Methods for Internal Pressurization Failure
Resistance of Unrestrained Packages for Medical
Applications
F 1141
F 1142
F 1144
B 139/B 139M
F 1145
F 1146
F 1147
F 1149
F 1150
F 1151
F 1159
F 116
F 1152
F 1153
F 1154
F 1155
F 1156
F 1157
F 1158
F 1160
F 1161
F 1162
F 117
F 1172
F 1177
F 1163
Wallcovering
Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight,
and Watertight
Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight
and Watertight, Hinged
Standard Specification for Phosphor Bronze Rod, Bar,
and Shapes
Turnbuckles, Swaged, Welded, Forged
Rotary Wing Specialized Medical Transport Units
Tension Testing of Calcium Phosphate and Metal
Qualifications, Resposibilities, and Authority of
Individuals and Institutions Providing Medical Direction
of Emergency Medical Services
Commercial Food Waste Pulper and Waterpress
Assembly
Determining Variations in Hardness of Film Ribbon
Pancakes
Design and Manufacture of Amusement Rides and
Devices
Standard Specification for Medical Screwdriver Bits
Dimensions of Notches on Silicon Wafers
Characterization of Metal-Oxide-Silicon (MOS)
Structures by Capacitance-Voltage Measurements
Qualitativaly Evaluating the Comfort, Fit, Function, and
Integrity of Chemical-Protective Suit Ensembles
Selection and Application of Piping System Materials
Terminology Relating to Product Counterfeit Protection
Systems
Classifying the Relative Performance of the Physical
Properties of Security Seals
Inspection and Evaluation of Tampering of Security
Seals
Standard Test Method for Shear and Bending Fatigue
Testing of Calcium Phosphate and Metallic Medical and
Composite Calcium Phosphate/Metallic Co
Minium Performance and Sfety Requirements for
Components and Systems of Anesthsia Gas Machines
Specification for Pole Vault Landing Pits
Test Method for Driving Torque of Medical Bone
Screws
Fuel Oil Meters of the Volumetric Positive
Displacement Type
Emergency Medical Services
Protective Headgear Used in Horse Sports and
Horseback Riding
F 1164
F 1169
F 1174
F 1193
F 1165
F 1166
F 1168
F 1170
F 1173
F 1175
F 1196
F 1176
F 1178
F 1179
F 118
F 1181
F 1182
F 1183
F 1184
F 1185
F 1186
F 1190
F 1187
F 1199
F 1200
B 411/B 411M
F 1188
Evaluation of Transparent Plastics Exposed to
Accelerated Weathering Combined with Biaxial Stress
Full-Size Baby Crid
Standard Practice for Using a Personal Computer Printer
as a Test Instrument
An Amusement Ride and Device Manufacturer Quality
Assurance Program
Measuring Angular Displacement of Multiple Images in
Transparent Parts
Human Engineering Design for Marine Systems,
Equipment and Facilities
Use In the Establishment of Thermal Processes for
Foods Packaged in Flexible Containers
Determining Performance of a Filter Medium Using
Water and Siliceous Particles
Thermosetting Resin Fiberglass Pipe and Fittings to be
Used for Marine Applications
Using the Computer Impact Print-Out Unit as a Test
Instrument for Manifold Comparison
Standard Specification for Sliding Watertight Door
Assemblies
Design and Installation of Thermoplastic Irrigation
Systems With Maximum Working Pressure of 63 psi
Enameling System, Baking, Metal Joiner Work and
Furniture
Inspection Procedure for Use of Anaerobic Thread
Locking Compounds With Studs
Terms Relating to Gaskets
Measuring Binocular Disparity in Transparent Parts
Anodes, Corrosion Preventative, Zinc; Slab, Plate, Disc
and Rod Shaped
Aluminum Alloy Chain Link Fence Fabric
Industrial and Commercial Horizontal Slide Gates
Composition of Ceramic Hydroxylapatite for Surgical
Implants
Chemicals According to Functional Groups
Neutron Irradiation of Unbiased Electronic Components
Fixed Wing Basic Life Support Transport Units
Cast (All Temperatures and Pressures) and Welded Pipe
Line Strainers (150 psig and 150°F Maximum)
Fabricated (Welded) Pipe Line Strainers (Above 150
psig and 150°F)
Standard Specification for Copper-Nickel-Silicon Alloy
Rod and Bar
Interstitial Atomic Oxygen Content of Silicon by
F 119
F 1192M
F 1194
F 1195
F 1202
F 1203
F 1221
F 1232
F 1233
F 1204
F 1205
F 1206
F 1207
F 1207M
F 1208
F 1209
F 1210
F 1258
F 1322
F 1216
F 1217
F 1218
F 1211
F 1212
F 1220
F 1222
F 1223
F 1224
Infrared Absorption
Rate of Grease Penetration of Flexible Barrier Materials
(Rapid Method)
Measurement of Single Event Phenomena from Heavy
Ion Irradiation of Semiconductor Devices [Metric]
Documenting the Results of Chemical Permeation
Testing on Materials Used in Protective Clothing
Rigid Laryngoscope for Tracheal Intubation-Hook on
Fittings for Fiberilluminated Blades and Handles
Washing Machines, Heat Sanitizing, Commercial, Pot,
Pan and Utensil, Vertically Oscillating Arm Type
Washing Machines, Pot, Pan and Utensil, Heat
Sanitizing, Commercial Rotary Conveyor Type
Standard Guide for Interagency Information Exchange
Generating a Test Pattern for Single-Pass Film Ribbons
Security Glazing Materials and Systems
Anesthesia Reservoir Bags
Anesthesia Breathing Tubes
Test Method for Evaluating Color Image Output from
Color Printers and Copiers
Electrical Insulation Monitors for Monitoring Ground
Resistance in Active Electrical Systems
Electrical Insulation Monitors for Monitoring Ground
Resistance in Active Electrical Systems (Metric)
Minium Performance and Safety Requirements for
Anesthesia Breathing Systems
Ecological Considerations for the Use of Oilspill
Dispersants in Freshwater and Other Inland
Environments, Ponds and Slough
Ecological Considerations for the Use of Oilspill
Dispersants in Freshwater and Other Inland
Environments, Lakes and Large Water Bodies
Standard Practice for Emergency Medical Dispatch
Selection of Shipboard Incinerators
Rehabilitation of Existing Pipelines and Conduits by the
Inversion and Curing of a Resin-Impregnated Tube
Cooker, Steam
Bronchoscpes (Rigid)
Semiconductor-Device Passivation Opening Layouts
Thermal Stability Testing Gallium Arsenide Wafers
Standard Guide for Emergency Medical Services
System (EMSS) Telecommunications
Hardware for Wood Fencing
Determination of Total Knee Replacement Constraint
Providing System Evaluation for Emergency Medical
F 1225
F 1226
F 1323
F 1327
F 1227
F 1228
F 1229
F 1231
F 1235
F 1236
F 1237
F 1238
F 1241
F 1242
F 1250
F 1243
F 1244
F 1239
F 1240
F 1245
F 1246
F 1247
F 1248
F 1249
F 1251
Services
Measuring the Ribbon Exit Force for Film and Fabric
Cartridges
Calibration of Liquid-Borne Particle Counters for
Submicrometer Particle Sizing
Standard Specification Shipboard Incinerators
Barrier Materials for Medical Packaging
Total Mass Loss of Materials and Condensation of
Outgassed Volatiles on Microelectronics-Related
Substrates
Oxidizable[Organic] Carbon on Wafer Surfaces[By
Persulfate]
Standard Guide for Establishing the Qualifications,
Education, and Training of EMS, Air-Medical Patient
Care Providers
Ecological Considerations for the Use of Oilspill
Dispersants in Freshwater and Other Inland
Environments, Rivers and Creeks
Consumer Safety for Portable Hook-On Chairs
Visual Inspection of Electrical Protective Rubber
Products
Commercial Dishwashing Machines, Multiple Tank,
Continuous Oval-Conveyor Type Heat-Sanitizing
Specification for Refractory Silicide Sputtering Targets
for Microelectronic Applications
Terminology of Silicon Technology
Cuffed and Uncuffed Tracheal Tubes
Safety Specification for Stationary Exercise Bicycles
Tracheal Tube Connectors
Berths, Marine
Oxygen Precipitation Characterization of Silicon Wafers
by Measurement of Interstitial Oxygen Reduction
Categorizing Results of Footwear Slip Resistant
Measurements on Walkway Surfaces with an Interface
of Various Foreign Substances
Faucets, Single and Double, Compression and SelfClosing Type, Shipboard
Electrically-Powered Home Care Ventilators Part 1Positive Pressure Ventilations and Ventilators Circuits
Intrusion Resistant Generic Vault Structures
Determination of Environmental Stress Crack
Resistance (ESCR) of Polyethylene Pipe
Water for Vapor Transmission Rate Through Plastic
Film and Sheeting Using a Modulated Infrared Sensor
Polymeric Biomaterials in Medical and Surgical Devices
F 1252
F 1253
F 1254
F 1255
F 1256
F 1257
F 1259
F 1263
F 1264
F 1266
F 1267
F 1265
F 1268
F 1259M
F 1260
F 1260M
F 1261M
F 1262M
F 1269
F 1270
F 1275
F 1290
F 1296
F 1271
F 1273
Measuring Optical Reflectivity of Transparent Materials
Training and Emergency Medical Technician (Basic) to
Perform Patient Secondary Assesment
Standard Practice for Performance of Prehospital
Manual Defibrillation
Performance of Prehospital Automated Defibrillation
Selection and Practice of the Emergency Medical
Services Instructor for Basic Life Support/Emergency
Medical Technician (BLS/EMT) Training Programs
Selection and Practice of the Emergency Medical
Services Instructor for Advanced Life
Support/Emergency Medical Technician (ALS/EMT)
Training Programs
Design of Flat, Straight-Line Test Structures for
Detecting Metallization Open-Circuit or ResistanceIncrease Failure Due to Electromigration
Guide for Analysis of Overtest Data in Radiation
Testing of Electronic Parts
Specification and Test Methods for Intramedullary
Fixation Devices
Cerebral Stereotactic Instruments
Metal, Expanded, Steel
Resistance to Impact for Resilient Floor Tile
Establishing and Operating a Public Information,
Education, and Relations Program for Emergency
Medical Service Systems
Design of Flat, Straight-Line Test Structures for
Detecting Metallization Open-Circuit or ResistanceIncrease Failure Due to Electromigration [Metric]
Estimating Electromigration Median Time-To-Failure
and Sigma of Integrated Circuit Metallizations
Estimating Electromigration Median Time-To-Failure
and Sigma of Integrated Circuit Metallizations [Metric]
Determining the Average Electrical Width of a Straight,
Thin-Film Metal Line [Metric]
Transient Radiation Upset Threshold Testing of Digital
Integrated Circuits [Metric]
Destructive Shear Testing of Ball Bonds
Preparing and Locating Emergency Muster Lists
Test Method for Performance of Griddles
Electrofusion Joining Polyolefin Pipe and Fittings
Evaluating Chemical Protective Clothing
Spill Valves for Use in Marine Tank Liquid
Overpressure Protection Applications
Tank Vent Flame Arresters
F 1274
F 1276
F 1277
F 1278
F 1278
F 1279
F 1281
F 1282
F 1283
F 1285
F 1280
F 1284
F 1286
F 1287
F 1288
F 1289
F 129
F 1291
F 1292
F 1293
F 1294
Fixed Wing Advanced Life Support Unit
Creep Relaxation of Laminated Composite Gasket
Materials
Determination of Leachable Chloride in Packing and
Gasketing Materials by Ion-Selective Electrode
Technique
Use and Handling of Flexible Retort Food Pouches in
the Processing Environment
Use and Handling of Flexible Retort Food Pouches in
the Processing Environment
Ecological Considerations for the Use of Oilspill
Dispersants in Freshwater and Other Inland
Environments, Permeable Surfaces
Standard Specification for Crosslinked
Polyethylene/Aluminum/Crosslinked Polyethylene
(PEX-AL-PEX) Pressure Pipe
Standard Specification for
Polyethylene/Aluminum/Polyethylene (PE-AL-PE)
Composite Pressure Pipe
Fixed Wing Specialized Medical Transport Units
Training Emergency Medical Technician (Basic) to
Perform Patient Examination Techniques
Ecological Considerations for the Use of Oil Spill
Dispersants in Fresh Water and Other Inland
Environments, Impermeable Surfaces
Evaluating Carpet Embedded Dirt Removal
Effectiveness of Residential Central Vacuum Cleaning
Systems
Development and Operation of Level 1 Pediatric
Trauma Facilities
Scope of Performance of First Responders Who Provide
Emergency Medical Care
Planning for and Response to Multiple Casualty Incident
Development of Literature Pertaining to the Selection of
Residential Resilient Floor Tile
Amount of Ink Deposit on Carbon Paper and Inked
Ribbons, Other Than Fabric Type
Measuring the Thermal Insulation of Clothing Using a
Heated Manikin
Standard Specification for Impact Attenuation of
Surface Systems Under and Around Playground
Equipment
Evaluation of Coated Transparent Plastics Subjected to
Cyclic Flexural/Thermal Fatigue
Terminology Relating to Automatic Identification Hard
Copy Printing Systems
F 1295
F 1297
F 1298
F 1304
F 1312
F 1315
F 1301
F 1303
F 1306
F 1308
F 1313
F 1305
F 1307
F 1309
F 1311
F 1314
F 1316
F 1317
F 1318
F 1319
F 1320
F 1321
F 1325
F 1326
Specification for Wrought Titanium-6 Aluminum-7
Niobium Alloy for Surgical Implant Applications [UNS
R56700]
Location and Instruction Symbols for Evacuation and
Lifesaving Equipment
Ball Joints of Flexible/Expansion Type for Marine
Applications
Standard Test Method for Deflection of Resilient Floor
Tile
Brick, Insulating, High-Temperature, Fire Clay
Standard Test Method for Density of a Sheet Gasket
Material
Labeling Chemical Protective Clothing
Sheet Vinyl Floor Covering with Backing
Slow Rate Penetration Resistance of Flexible Barrier
Films and Laminates
Quantitating Volatile Extractables in Microwave
Susceptors Used for Flood Products
Specification for Volatile N-Nitrosamine Levels in
Rubber Nipples on Pacifiers
Classification of Amusement Ride and Device Related
Injuries and Illnesses
Oxygen Transmission Rate Through Dry Packages
Using a Coulometric Sensor
Installation Procedures for Fitting Chocks to Marine
Machinery Foundations
Large-Diameter Fabricated Carbon Steel Flanges
Wrought Nitrogen Strengthened, High Manganese. High
Chromium Stainless Steel Bar and Wire for Surgical
Implants
Measuring the Transmissivity of Transparent Parts
Calibration of Microwave Ovens
Determination of Productivity Using Electrostatic Copy
Machines with Various Configurations
Determination of Abrasion and Smudge Resistance of
Images Produced form Business Copy Products
(Crockmeter Method)
Standard Test Method for Evaluating Thermal Paper
Employing a Facsimile Thermal Printer as a Test
Instrument
Conducting a Stability Test (Lightweight Survey and
Inclining Experiment) to Determine the Light Ship
Displacement and Centers of Gravity of a Vessel
Suture Needle Holders-General Workmanship
Requirements and Corresponding Test Methods
Measuring Maximum Dry Volume of Utility Vacuum
F 1328
F 1334
F 1336
F 1357
F 1329
F 1330
F 1335
F 146
F 1495
F 1496
F 1342
F 1331
F 1332
F 1333
F 1337
F 1338
F 1339
F 1341
F 1343
F 1344
F 1345
F 1346
F 1347
F 1348/F 1348M
F 1349
Cleaners
Standard Guide for Training Emergency Medical
Technician (Basic) to Prepare Patients for Medical
Transportation
Determining A-Weighted Sound Power Level of
Vacuum Cleaners
Standard Specification Poly(Vinyl Chloride) (PVC)
Gasketed Sewer Fittings
Specification for Articulating Total Wrist Implants
Standard Guide for Training the Emergency Medical
Technician (Basic) in Basic Anatomy and Physiology
Metallic Abrasive Blasting to Descale the Interior of
Pipe
Pressure-Rated Composite Pipe and Fittings for
Elevated Temperature Service
Standard Test Methods for Fluid Resistance of Gasket
Materials
Specification for Combination Oven Electric or Gas
Fired
Test Method for Performance of Convection Ovens
Protective Clothing Material Resistance to Puncture
Installation Procedures of Vinyl Deck Coverings on
Portable Plates in Electrical and Electronic Spaces
Use of SI (Metric) Units in Maritime Applications
(Committee F-25 Supplement of E 380)
Construction of Fire and Foam Station Cabinets
Human Engineering Program Requirements for Ships
and Marine Systems, Equipment, and Facilities
Main Propulsion Medium Speed Marine Diesel Engines
Covering Performance and Minimum Scope of
Assembly
Organization and Operation of Emergency Medical
Services Systems
Unalloyed Titanium Wire for Surgical Medical Services
Systems
Anesthetic Equipment-Scavenging Systems for
Anethetic Gases
Rubber Floor Tile
Zinc-5 % Aluminum-Mishmetal Alloy-Coated Steel
Chain-Link Fence Fabric
Safety Covers and Labeling Requirements for All
Covers for Swimming Pools, Spas and Hot Tubs
Manually Operated Fueling Hose Reels
Pneumatic Rotary Descaling Machines
Nonvolatile Ultravoilet (UV) Absorbing Extractables
F 1497
F 1499
F 15
F 1350
F 1356
F 1358
F 1359
B 134/B 134M
F 1351
F 1352
F 1355
F 1355
F 1356
F 1361
F 1367
F 1371
F 1378
F 136
F 1360
F 1362
F 1363
F 1364
F 1365
from Microwave Susceptors
Test Method for Determining Laser Resistance of the
Shaft of Tracheal Tubes
Specification for Coextruded Composite Drain, Waste,
and Vent Pipe (DWV)
Standard Specification for Iron-Nickel-Cobalt Sealing
Alloy
Standard Specification for Wrought 18 Chromium-14
Nickel-2.5 Molybdenum Stainless Steel Surgical
Fixation Wire (UNS S31673)
Guide for the Irradiation of Fresh and Frozen Red Meats
and Poultry to Control Pathogens and Other
Microorganisms
Standard Test Method for Effects of Flame Impingement
on Materials Used in Protective Clothing Not
Designated Primarily for Flame Resistance
Liquid Penetration Resistance of Protective Clothing or
Protective Ensembles Under a Shower Spray While on a
Mannequin
Standard Specification for Brass Wire
Determination of the Effect of Hard Creasing Paper on
Images Produced by Business Imaging Systems
Broadhead Performance and Safety Standards
Irradiation of Fresh Fruits for Disinfestation as a
Quarantine Treatment
Irradiation of FResh Fruits for Disinfestation as
Quarantine Treatment
Irradiation of Fresh and Frozen Red Meats and Poultry
(to Control Pathogens)
Test Method for Performance of Open Deep Fat Fryers
Chromium Sputtering Targets for Thin Film
Applications
Specification for Vegetable Peeling Machines, Electric
Standard Specification for Shoulder Prostheses
Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra
Low Interstitial) Alloy (UNS R56401) for Surgical
Implant Applications
Ovens, Microwave, Electric
Shear Strength and Shear Modulus Aerospace Glazing
Interlayer Materials
Reduction of Risk of Injury for Archery Overdraws
Use of a Calibration Device to Demonstrate the
Inspection Capability of an Interferometric Laser
Imaging Nondestructive Tire Inspection System
Test Method for Water Infiltration Resistance of Plastic
Underground Conduit Joints Which Use Flexible
F 1366
F 1368
F 1369
F 137
F 1379
F 1380
F 1381
F 1370
F 1372
F 1373
F 1374
F 1375
F 1376
F 1377
F 138
F 1382
F 1383
F 1384
F 1385
F 1386
F 1387
F 141
F 1415
F 1388
Elastomeric Seals
Measuring Oxygen Concentration in Heavily Doped
Silicon Substrates by Secondary Ion Mass Spectrometry
Determining the Sieving Performance of a Fluid Filter
Medium Employing an Aqueous Suspension of
Microspheres and a Spectrophotometer
Heaters, Convection, Steam and Hot Water
Test Method for Flexibility of Resilient Flooring
Materials with Cylindrical Mandrel Apparatus
Terminology Relating to Barbed Tape
Metal Insert Fittings for Polybutylene (PB) Tubing
Planning and Developing 9-1-1 Enhanced Telephone
System
Pressure-Reducing Valves for Water Systems,
Shipboard
Scanning Electron Microscope (SEM) Analysis of
Metallic Surface Condition for Gas Distribution System
Components
Determination of Cycle Life of Automatic Valves for
Gas Distribution System Components
Ionic/Organic Extractables of Internal SurfacesIC/GC/FTIR for Gas Distribution System Components
Energy Dispersive X-Ray Spectrometer (EDX) Analysis
of Metallic Surface Condition for Gas Distribution
System Components
Metallurgical Analysis for Gas Distribution System
Components
Cobalt-Chromium-Molybdenum Powder for Coating of
Othopedic Implants
Stainless Steel Bar and Wire for Surgical Implant
Applications
Search and Rescue Computer Software Information
Interchange
Resistance of Protective Clothing Materials to
Permeation by Liqids or Gases Under Conditions of
Intermittent Contact
Fire Tests of Marine Joiner Door Assembly
Platforms in Cargo Tanks
Construction of a Sounding Tube and Striker Plate for
Tank Sounding
Performance of Mechanically Attached Fittings
Standard Terminology Relating to Resilient Floor
Coverings
Standard Specification for Pulse Oximeters
Standard Test Method for Generation Lifetime and
Generation Velocity of Silicon Material by Capacitance-
F 1389
F 1391
F 1392
F 1393
F 14
F 140
F 139
F 1390
F 1394
F 1396
F 1397
F 1398
F 1404
F 1405
F 1407
F 1408
F 1409
F 1410
F 1411
F 1412
F 1413
F 1414
Time Measurements of M
Photoluminescence Analysis of Single Crystal Silicon
for III-V Impurities
Test Method for Substitutional Atomic Carbon Content
of Silicon by Infrared Absorption
Test Method for Determining Net Carrier Density
Profiles in Silicon Wafers by Capacitance-Voltage
Measurements With a Mercury Probe
Determining Net Carrier Density in Silicon Wafers by
Miller Feedback Profiler Measurements with a Mercury
Probe
Standard Practice for Making and Testing Reference
Glass-Metal Bead-Seal
Making Reference Glass-Metal Butt Seals and Testing
for Expansion Characteristics by Polarimetric Method
Stainless Sheet and Strip for Surgical Implants (Special
Quality)
Measuring Warp on Silicon Wafers by Automated
Noncontact Scanning
Determination of Particle Contribution from Gas
Distribution System Valves
Determination of Oxygen Contribution by Gas
Distribution System Components
Determination of Moisture Contribution by Gas
Distribution System Components
Determination of Total Hydrocarbon Contribution by
Gas Distribution System Components
Crystallographic Perfection of Gallium Arsenide by
Molten Potassium Hydroxide (KOH) Etch Technique
Dynamic Thermal Response of Direct Thermal Imaging
Products Atlantek Method
Resistance of Chemical Protective Clothing Materials to
Liquid Permeation -- Permeation Cup Method
Subcutaneous Screening Test for Implant Materials
Test Method for Straight Line Movement of Vacuum
Cleaners While Cleaning Carpets
Measuring Maximum Functional Wet Volume of Utility
Vacuum Cleaners
Standard Practice for Presenting Selected Information
on Vacuum Cleaners for Consumer Use
Polyolefin Pipe and Fittings for Corrosive Waste
Drainage Systems
Oilspill Dispersant Application Equipment Boom and
Nozzle Systems
Measurement of Cut Resisance to Chain Saw in Lower
Body (lega) Protective Clothing
F 1416
F 1416
F 1418
F 1419
F 142
F 1420
F 1417
F 1421
F 1427
F 1431
F 1433
F 1447
F 1457
F 1422
F 1423
F 1424
F 1425
F 1426
F 1428
F 1429
F 1430
F 1434
F 1435
F 1436
F 1437
F 1438
Selection of Time-Temperature Indicators
Selection of Time-Temperature Indicators
Standard Guide for Training the Emergency Medical
Technician (Basic) in Roles and Responsibilities
Standard Guide for Training the Emergency Medical
Technician (Basic) To Manage Shock
Standard Test Method for Indentation of Resilient Floor
Tiles (McBurney Test)
Standard Guide for Training the Emergency Medical
Technician (Basic) to Perform Patient Management
Techniques
Installation Acceptance of Plastic Gravity Sewer Lines
Using Low-Pressure Air
Standard Guide for Training the Emergency Medical
Technician (Basic) To Manage Obstetrical Emergencies
Standard Consumer Safety Specification for Bunk Beds
Water Trap for Diesel Exhaust
Mechanically Refrigerated Air Conditioner
Protective Headgear Used in Bicycling
Standard Terminology Relating to Laser Printers
Using the Incident Command System Framework In
Managing Civilian Search and Rescue Operations
Determination of the Quality of Monochrome Images
Produced from Non-Impact Personal Computer Printers
Estimating Toner Usage in Full-Color Copiers Utilizing
Dry Mono-or-Dual-Component Toners
Determining the Tribocharge of Two-Component
Developer Materials
Identifying and Describing TIre Tread Surface Irregular
Wear Patterns Resulting from Tire Use
Aluminum Particle-Filled Base/Organic or Inorganic
Topcoat, Corrosion Protective Coatings for Fasteners
Assembly Force of Plastic Underground Conduit Joints
That Use Flexible Elastomeric Seals Located in the Bell
Acoustic Emission Testing of Insulated Aerial Personnel
Devices with Supplemental Load Handling Attachments
Estimating the Performance of a Fuser Oil in an
Electrostatic Copier or Printer
Specification for Designation of the Balance Point
Location for Archery Arrows
Center Serving Diameter Dimensions for Archery Bow
Strings
Inclined Cargo Tank Ladders
Determination of Surface Roughness by Scanning
Tunneling Microscopy for Gas Distribution System
F 144
F 1441
F 1442
F 1443
F 1439
F 1440
F 1444
F 1445
F 1446
F 1448
F 1449
F 145
F 1450
F 1451
F 1452
F 1453
F 1454
F 1455
F 1456
F 1458
F 1459
F 1460
F 1461
Components
Standard Practice for Making Reference Glass-Metal
Sandwich Seal and Testing for Expansion
Characteristics by Polarimetric Meth
Soft-Tissue Expander Devices
Using a Copier or Printer as a Test Instrument for
Evaluating Paper Performance
Using 0.008-in. (0.203-mm) Aperture Reflectometers as
Test Instruments for Measuring Visual Image Quality of
Business Copy Images
Performance of Lifetime Bioassay for the Tumorigenic
Potential of Implant Materials
Cyclic Fatigue Testing of Metallic Stemmed
Hiparthroplasty Femoral Components Without Torsion
Determining Dynamic Thermal Response of Direct
Thermal Paper-Label Printer Method
Test Method for Determining Static Thermal Sensitivity
of Direct Thermal Media
Test Methods for Equipment and Procedures Used in
Evaluating the Performance Characteristics of Protective
Headgear
Selection of Security Technology for Protection Against
Counterfeiting, Alteration, Diversion, Duplication,
Simulation, Substitution (CADDSS) of Products or
Documents
Guide for Care and Maintenance of Flame Resistant and
Thermally Protective Clothing
Evaluating Flat-Faced Gasketed Joint Assemblies
Hollow Metal Swinging Door Assemblies for Detention
Facilities
Measuring Sori on Silicon Wafers by Automated
Noncontact Scanning
Minimum Performance and Safety Requirements For
Components and Systems of Anesthetic Gas Monitors
Training and Evaluation of First Responders Who
Provide Emergency Medical Care
Comparing Correctable Film Ribbons
Selection of Structural Details for Ship Construction
Capnometers
Measurement of Cut Resistance to Chain Saw of Foot
Protective Devices
Determination of the Susceptibility of Metallic Materials
to Gaseous Hydrogen Embrittlement
Calibrating Oil Spill Dispersant Application Equipment
Boom and Nozzle Systems
Chemical Protective Clothing Program
F 1462
F 1464
F 1463
F 1465
F 1488
F 1491
F 1466
F 1467
F 1468
F 1469
F 147
F 1470
F 1471
F 1472
F 1473
F 1474
F 1476
F 1478
F 1479
F 148
F 1480
F 1481
F 1483
F 1484
F 1487
Oxygen Analyzers
Oxygen Concentrators for Domiciliary Use
Alarm Signals In Medical EquipmentUsed In Anesthesia
and Respiratory Care
Selection of Operational Security Control Systems
Specification for Coextruded Composite Pipe
Standard Specification for An Avalanche Beacon
Frequency
Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing
Applications
Use of an X-Ray Tester (=10 ke V Photons) in Ionizing
Radiation Effects Testing of Semiconductor Devices and
Microcircuits
Evaluation of Metallic Weapons Detectors for
Controlled Access Search and Screening
Conducting a Repeatability and Reproducibility Study
on Test Equipment for Nondestructive Testing
Flexibility of Non-Metallic Gasket Materials
Standard Guide for Fastener Sampling for Specified
Mechanical Properties and Performance Inspection
Standard Test Method for Air Cleaning Performance of
a High-Efficiency Particulate Air Filter System
Standard Specification for Wrought Titanium-6
Aluminum-4 Vanadium Alloy (UNS R56400) for
Surgical Implant Applications
Resistance to Slow Crack Growth of Polyethylene Pipes
and Resins
Slow Crack Growth Resistance of Notched Polyethylene
Plastic Pipe
Performance of Gasketed Mechanical Couplings for Use
in Piping Applications
Determination of Abrasion Resistance of Images
Produces from Copier and Printers (Taber Method)
Microwave Food Packaging
Binder Durability of Cork Composition Gasket
Materials
Preparing a Chart for Presenting Residential Resilient
Floor Covering Information to the Consumer
Standard Guide for Ecological Considerations for the
Use of Bioremediation in Oil Spill Response - Sand and
Gravel Beaches
Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
Performance of Steam Cookers
Consumer Safety Performance Specification for
Playground Equipment for Public Use
F 149
F 1482
F 1486
F 1489
F 1490
F 1492
F 1493
F 1494
F 1498
F 150
F 1500
F 1501
F 1544
F 1546/F 1546M
F 1560
F 1502
F 1503
F 1504
F 1505
F 1506
F 1507
F 151
F 1562
F 1582
F 1583
F 1508
F 1509
Optical Character Recognition
Use Under Resilient Flooring
Determination of Abrasion and Smudge Resistance of
Images Produced from Office Products (GA-CAT
Method)
Performance of Patient Assesment by the Emergency
Medical Technicain
Search and Rescue
Standard Specifications for Helmets Used in
Skateboarding and Trick Roller Skating
Financing and Financial Accountability of Medical
Transportation Systems
Protective Clothing
Taper Pipe Threads 60° for Thermoplastic Pipe and
Fittings
Electrical Resistance of Conductive and Static
Dissipative Resilient Flooring
Quantitating Non-UV-Absorbing Nonvolatile
Extractables from Microwave Susceptors Utilizing
Solvents as Food Simulants
Tension Testing of Calcium Phosphate Coatings
Specification for Determining the Rating Velocities of
an Archery Bow
Fire Hose Nozzles
Standard Practice for Emergency Medical Dispatch
Management
Static Measurements on Tires for Passenger Cars, Light
Trucks, and Medium Duty Vehicles
Machine/Process Potential Study Procedure
Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing
Sewer and Conduit Rehabilitation
Insulated and Insulating Hand Tools
Standard Performance Specification for Flame Resistant
Textile Materials for Wearing Apparel for Use by
Electrical Workers Exposed to Momentary Electri
Surge Suppressors for Shipboard Use
Residual Solvents in Flexible Barrier Materials
Guide for Use-Oriented Foreign Language Instruction
Terms Relating to Spinal Implants
Standard Practice for Communications Procedures Phonetics
Angle Style, Pressure Relief Valves for Steam, Gas and
Liquid Services
Determining Acceptability of Ribbon Welds in Fabric
Cartridges
F 1510
F 1511
F 1512
F 1513
F 1514
F 1515
F 1516
F 1517
F 1518
F 1519
F 1585
F 1756
F 1757
F 152
F 1520
F 1521
F 1522
F 1523
F 1526
F 1527
F 1528
F 1524
F 1525
Rotary Positive Displacement Pumps, Commercial Ship
Use
Mechanical Seals for Shipboard Pump Applications
Practice for Ultrasonic C-Scan Bond Evaluation of
Sputtering Target-Backing Plate Assemblies
Specification for Pure Aluminum (Unalloyed) Source
Material for Electronic Thin Film Applications
Measuring Heat Stability of Resilient Vinyl Flooring by
Color Change
Measuring Light Stability of Resilient Vinyl Flooring by
Color Change
Sealing Seams of Resilient Flooring Products by the
Heat Weld Method when Recommended
Scope of Performance of Emergency Medical Services
Ambulance Operations
Practice for Cleaning and Disinfection of Flexible
Fiberoptic and Video Endoscopes Used in the
Examination of the Hollow Viscera
Qualitative Analysis of Volatile Extractables in
Microwave Susceptors Used to Heat Food Products
Guide for Integrity Testing of Porous Barrier Medical
Packages
Implementation of a Fleet Management System Network
Digital Communication Protocols for Computerized
Systems
Tension Testing of Nonmetallic Gasket Materials
Determining the Drive Torque for Film and Fabric
Ribbon Cartridges
Performance of Range Tops
Use of the Steam Stripping Process Mitiigating
Chemical Spills
Standard Guide for Selection of Booms in Accordance
With Water Body Classifications
Standard Test Method for Measuring Surface Metal
Contamination on Silicon Wafers by Total Reflection XRay Fluorescence Spectr
Guide for Application of Silicon Standard Reference
Materials and Reference Wafers for Calibration and
Control of Instruments for Measuring Resistivity of
Silicon
Test Method for Measuring Boron Contamination in
Heavily Doped N-Type Silicon Substrates by Secondary
Ion Mass Spectrometry
Use of Advanced Oxidation Process for the Mitigating
of Chemical Spills
Guide for Use of Membrane Technology in Mitigating
F 1529
F 153
F 1530
F 1531
F 1532
F 1533
F 1534
F 1534M
F 1535
F 1536
F 1537
F 1538
F 1539
F 154
F 1540
F 1541
F 1542
F 1543
F 1550
F 1545
F 1547
F 1548
F 1549
Hazardous Chemical Spills
Sheet Resistance Uniformity Evaluation by In-Line
Four-Point Probe with the Dual-Configuration
Procedure
Wear Resistance of Inked Computer Ribbons
Measuring Flatness, Thickness Variation on Silicon
Wafers by Automated Noncontact Scanning
Comparing Printers or Copier Cartridges
Qualification, Selection, Training, Utilization and
Supervision of Security Screening Personnel
Deformed Polyethylene (PE) Liner
Standard Test Method for Determining Changes in FireTest-Response Characteristics of Cushioning Materials
After Water Leaching
Determining Changes in Fire-Test-Response
Characteristics of Cushioning Materials After Water
Leaching [Metric]
Test Method for Carrier Recombination Lifetime in
Silicon Wafers by Noncontact Measurement of
Photoconductivity Decay by Microwave Reflectance
Test Method for Determining Strength and Setting Time
of Synthetic Water-Activated Polyurethane Fiberglass
Orthopaedic Casting Tape
Specification for Wrought Cobalt - 28Chromium 6Molybdenum Alloys for Surgical Implants (UNS
R31537, UNS R31538, and UNS R31539)
Glass and Glass Ceramic Biomaterials for Implantations
Test Method for Constant Amplitude Bending Fatigue
Tests of Metallic Bone Staples
Identification of Structures and Contaminants Seen on
Specular Silicon Surfaces
Pull-Out Fixation Strength of Metallic Bone Staples
Standard Specification and Test Methods for External
Skeletal Fixation Devices
Standard Specification for the Requirements and
Disclosure of Self-Closing Aneurysm Clips
Shock Attenuation Properties of Fencing Surfaces
Standard Test Method for Determination of Fire-TestResponse Characteristics of Components or Composites
of Mattresses or Furniture for Use in Correcti
Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
Listing Relevant Standards and Publications for
Commerical Shipbuilding
Performance of Fittings for Use with Gasketed
Mecahnical Couplings Used in Piping Applications
Underwater Search and Rescue and Recovery Activities
F 1550M
F 1551
F 1552
F 1553
F 1554
F 1555
F 1556
F 1557
F 1558
F 1559
F 1561
F 1563
F 1564
F 1565
F 1568
F 1578
F 1566
F 1567
F 1569
F 1570
F 1571
F 1572
F 1573
F 1574
F 1575
F 1577
Determining of Fire-Test-Response Characteristics of
Components or Composites of Mattresses or Furniture
for Use in Correctinoal Facilities After Exposure to
Vandlism, by Employing Bench Scale Oxygen
Consumption Calorimeter
Comprehensive Characterization of Synthetic Turf
Playing Surfaces and Materials
Training, Instructor Qualification and Certification
Eligibility of Emergency Medical Dispatchers
Specifying Chain Link Fence
Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
Characteristics for Extremity Splints
Spinal Immobilization and Extrication (Spine) Device
Characteristics
Full Body Spinal Immobilization Devices (FBSID)
Characteristics
Characteristics for Adjunct Cervical Spine
Immobilization Devices (ACSID)
Characteristics for Cervical Spine Immobilization
Collar(s) (CSIC)
Plastic Chairs for Outdoor Use
Standard Specification for Tools to Squeeze-off
Polyethylene (PE) Gas Pipe or Tubing
Specification for Structure-Mounted Insulating Work
Platforms for Electrical Workers
Pressure-Reducing Valves for Steam Services
Specification for Food Processors, Electric
Standard Practice for Contact Closure Cycling of a
Membrane Switch
Evaluation of Innersprings and Boxsprings
Fabricated or Cast Automatic Self-Cleaning, Fuel Oil
and Lubricating Oil Strainers
Guide for Generation of Consensus Reference Materials
for Semiconductor Technology
Determining the Tactile Ratio of a Membrane Switch
Determination of Abrasion and Smudge Resistance of
Images Products from Business Copy Products
(Sutherland Method)
Tire Performance Testing on Snow and Ice Surfaces
Standard Specification for Anesthetic Equipment Oropharyngeal and Nasopharyngeal Airways
Compressive Strength of Gaskets at Elevated
Temperatures
Determining Bending Yield Moment of Nails
Detention Locks for Swinging Doors
F 1579
F 1580
F 1581
F 1584
F 1586
F 1587
F 1588
F 1589
F 1611
F 1625
F 1633
F 1636
F 1590
F 1591
F 1592
F 1593
F 1594
F 1595
F 1596
F 1597
F 1598
F 1599
F 1673
F 1674
F 1726
Polyaryletherketone (PAEK) Resins for Surgical
Implant Applications
Standard Specification for Titanium and Titanium-6 %
Aluminum-4 % Vanadium Alloy Powders for Coatings
of Surgical Implants
Composition of Anorganic Bone for Surgical Implants
Marking Buildings During Disaster Search Operations
Wrought Nitrogen Strengthened -21 Chromium-10
Nickel-3 Maganese-2.5 Molybdenum Stainless Steel Bar
for Surgical Implants
Head and Face Protective Equipment for Ice Hockey
Goaltenders
Constant Tensile Load Joint Test (CTLJT)
Determination of the Critical Pressure for Rapid Crack
Propagation in Plastic Pipe
Standard Specification for Intramedullary Reamers
Specification and Test Method for Rear-Mounted
Bicycle Child Carriers
Techniques in Land Search
Standard Specification for Bores and Cones for Modular
Femoral Heads
Tracheostomy Tube Connectors
Standard Practice for Visual Signals Between Persons
on the Ground and in Aircraft During Ground
Emergencies
Detention Hollow Metal Vision Systems
Trace Metallic Impurities in Electronic Grade
Aluminum by High Mass-Resolution Glow-Discharge
Mass Spectrometer
Specification for Pure Aluminum (Unalloyed) Source
Material for Vacuum Coating Applications
Standard Practice for Viewing Conditions for Visual
Inspection of Membrane Switches
Standard Practice for Exposure of Membrane Switches
to Temperature and Relative Humidity
Standard Test Method for Determining the Actuation
Force and Contact Force of a Membrane Switch
Determine the Effects of Chemical/Solvent Exposure to
a Membrane Switch/Graphic Overlay (Spot Test
Method)
Collection Performance Data on Temporary Storage
Devices
PolyVinylidene Fluoride (PVDF) Corrosive Waste
Drainage Systems
Joint Restraint Products for Use with PVC Pipe
Analysis of Crystallographic Perfection of Silicon
F 1727
F 16
F 1600
F 1601
F 1602
F 1603
F 1604
F 1605
F 1606
F 1608
F 1609
F 1610
F 1612
F 1607
F 1613
F 1614
F 1615
F 1616
F 1617
F 1618
F 1619
F 1620
Wafers
Detection of Oxidation Induced Defects in Polished
Silicon Wafers
Standard Test Methods for Measuring Diameter or
Thickness of Wire and Ribbon for Electronic Devices
and Lamps
Bioremediation
Central Vacuum Cleaning Systems
Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L).
Floor or Wall Mounted, Direct Connected, Gas Fired
and Electric Fired
Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L).
Tilting, Table Mounted, Direct Connected, Gas Fired
and Electric Fired
Freezers, Ice Cream, Soft Serve, Shake
Performance of Double-Sided Griddles
Rehabilitation of Existing Sewers and Conduits with
Deformed Polyethylene (PE) Liner
Test Method for Microbial Ranking of Porous
Packaging Materials (Exposure Chamber Method)
Calcium Phosphate Coatings for Implantable Materials
Test Method for Soft Tissue Fixation Strength of
Metallic Bone Staples
Standard Practice for Cyclic Fatigue Testing of Metallic
Stemmed Hip Arthroplasty Femoral Components with
Torsion
Reporting of Test Performance Data for Oil Spill
Response Pumps
Specification for Surgical Tissue/Dressing/Pick-Up
Forceps (Thumb Type)
Shock Attenuating Properties fo Materials Systems for
Athletic Footwear
Specification for Cautionary Labeling for Five-Gallon
Open-Head Plastic Containers
Scope Performance of First Responders Who Practice in
the Wilderness, Delayed or Prolonged Transport
Settings
Measuring Surface Sodium, Aluminum, Potassium, and
Iron on Silicon and EPI Substrates by Secondary Ion
Mass Spectrometry
Determination of Uniformity of Thin Films on Silicon
Wafers
Standard Test Method for Measurement of Interstitial
Oxygen Content of Silicon Wafers by Infrared
Absorption Spectroscopy with
Calibrating a Scanning Surface Inspection System Using
F 1621
F 1622
F 1623
F 1624
F 1626
F 1627
F 1628
F 1629
F 1630
F 1632
F 1634
F 1635
F 1637
F 1631
F 1638
F 1639
F 1640
F 1641
F 1645
F 1646
F 1660
F 1642
F 1643
Monodisperse Polysyrene Latex Spheres Deposited on
Polished or Epitaxial Surfaces
Determining the Positional Accuracy Capabilities of a
Scanning Surface Inspection System
Standard Test Method for Measuring the Torsional
Properties of Metallic Bone Screws
Thermal Imaging Products
Standard Test Method For Measurement of Hydrogen
Embrittlement Threshold in Steel by the Incremental
Step Loading Technique
Preparing Shipboard Fire Control Plans
Tracheostomy Tubes-Pediatric Tracheostomy Tubes
Standard Specification for Labeling and Marking of
Cuffed and Uncuffed Tracheal Tubes and Related
Treatments Intended for Use
Establishing and/or Operating Emergency Medical
Services management Information Systems
Standard Test Method for Low Temperature FT-IR
Analysis of Single Crystal Silicon for III-V Impurities
Particle Size Analysis and Sand Shape Grading of Golf
Course Putting Green and Sports Field Rootzone Mixes
Standard Practice for In-Vitro Environmental
Conditioning of Polymer Matrix Composite Materials
and Implant Devices
Standard Test Method for In Vitro Degradation Testing
of Poly (L-lactic Acid) Resin and Fabricated Form for
Surgical Implants
Safe Walking Surfaces
Impact Attenuation Properties of Body Padding and
Protective Wear for the Sport of Fencing
Terminology for Surgical Tissue/Dressing/Pick-Up
Forceps (Thumb-Type)
Performance of Combination Ovens
Packaging Materials for Foods to Be Irradiated
Measuring Penetration Resistance of Security Glazing
Using a Pendulum Impactor
Standard Test Method for Water Migration in
Honeycomb Core Materials
Terminology Relating to Safety and Traction for
Footwear
Test Method for Elastic Static Bending of Metallic Bone
Staples
Glazing and Glazing Systems Subject to Airblast
Loadings
Standard Test Methods for Detention Sliding Door
Locking Device Assembly
F 1644
F 1647
F 1648
F 1649
F 1649
F 1650
F 1651
F 1652
F 1653
F 1657
F 1658
F 1663
F 1654
F 1655
F 1656
F 1659
F 1661
F 1667
F 1672
F 1664
F 1665
F 1666
F 1668
F 1669M
F 1670
Health and Safety Training of Oil Spill Responders
Organic Matter Contents of Putting Green and Sports
Turf Root Zone Mixes
Archery Bowstring Component--Serving String Material
Evaluating Wet Braking Traction Performance of
Passenger Car Tires on Vehicles Equipped With AntiLock Braking Systems
Slips, Stumbles, Trips, and Falls
Evaluating Tire Traction Performance Data Under
Varying Test Conditions
Training the emergency Medical Technician
(Paramedic)
Providing Essential Data Needed in Advance for
Prehospital Emergency Medical Services (EMS)
Scope of Performance of Triage in Prehospital
Environment
Emergency Joining of Booms with Incompatible
Connectors
Shear Testing of Calcium Phosphate Coatings
Determining the Capacitance of a Membrane Switch
Training First Responders Who Practice in the
Wilderness, Delayed or Prolonged Transport PreHospital Environment
Training First Responders Who Practice in the
Wilderness, Delayed or Prolonged Transport Settings
Health and Safety Training of Oil Spill Responders in
the United States
Bending and Shear Fatigue Testing of Calcium
Phosphate Coatings on Solid Metallic Substrates
Determining the Contact Bounce Time of a Membrane
Switch
Standard Specification for Driven Fasteners: Nails,
Spikes, and Staples
Standard Specification for Resurfacing Patellar
Prosthesis
Standard Specification for Poly(vinyl Chloride) (PVC)
and Other Conforming Organic Polymer-Coated Steel
Tension Wire Used with Chain-Link Fence
Standard Specification for Poly(Vinyl Chloride) (PVC)
and Other Conforming Organic Polymer-Coated Steel
Barbed Wire Used With Chain-Link Fence
Adult Tracheotomy
Construction Procedures for Buried Plastic Pipe
Insulation Monitors for Shipboard Electrical Systems
(Metric)
Resistance of Materials Used in Protective Clothing to
F 1671
F 1675
F 1676
F 1677
F 1679
F 1685
F 1686
F 1678
F 1680
F 1682
F 1681
F 1683
F 1684
F 1687
F 1688
F 1689
F 17
F 1704
F 1725
F 1690
F 1691
F 1692
F 1693
F 1694
F 1695
Penetration by Synthetic Blood
Resistance of Materials Used in Protective Clothing to
Penetration by Blood-Borne Pathogens Using Phi-X174
Bacteriophage Penetration as a Test System
Life Cycle Cost Analysis of Plastic Pipe Used for
Ci\ulverts, Strom Sewers, and Other Buried Conduits
Basic Tumbling Mats
Using a Portable Inclineable Articulated Strut Slip
Tester (PIAST)
Test Method Using a Variable Incidence Tribometer
(VIT)
Pressure-Reducing Manifolds for Air or Nitrogen
Systems
Surveys to Document and Assess Oiling Conditions on
Shorelines
Using a Portable Articulated Strut Slip Tester (PAST)
Test Method for Determining Circuit Resistance of a
Membrane Switch
Test Method for Determining Travel of a Membran
Switch
Test Method for Determining Current Carrying Capacity
of a Conductor as Part of a Membrane Switch Circuit
Creasing or Bending a Membrane Switch, Membrane
Switch Tail Assembly or Membrane Switch Component
Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low
Thermal Expansion Applications
Terminology and Indices to Describe Oiling Conditions
on Shorelines
Estimating Oil Spill Recovery System Effectiveness
Determining the Insulation Resistance of a Membrane
Switch
Terminology Relating to Flexible Barrier Materials
Test Methods for Performance of Commercial Kitchen
Ventilation Systems
Analysis of Crystallographic Perfection of Silicon Ingots
Humidifiers for Medical Use-Part 1: General
Requirements for Active Humidification Systems
Determining Axial Pull-Out Strength of Medical Bone
Screws
Household Central Vacuum Cleaning Systems
Consideration of Bioremediation as an Oil Spill
Response Method on Land
Composing Walkway Surface Evaluation and Incident
Report Forms For Slips, Stumbles, Trips, and Falls
Performance of Underfired Broilers
F 1696
F 1697
F 1698
F 1699
F 1700
F 1701
F 1703
F 1702
F 1705
F 1706
F 1707
F 1708
F 1709
F 1710
F 1711
F 1712
F 1713
F 1714
F 1715
F 1716
F 1717
F 1718
F 1719
Energy Performance of Single-Rack Hot Water
Sanitizing , Door-Type Commercial
Standard Specification for Poly(Vinyl Chloride) (PVC)
Profile Strip for Machine Spiral-Wound Liner Pipe
Rehabilitation of Existing Sewers and Co
Installation of Poly(Vinyl Chloride)(PVC) Profile Strip
Liner and Cementitous Grout for Rehabilitation of
Existing Man-Entry Sewers and Conduits
Passive Fiber Optic Seals
Solid Vinyl Floor Tile
Standard Specification for Unused Polypropylene Rope
with Special Electrical Properties
Ice Hockey Playing Facilities
Measuring Shock-Attenuation Characteristics of Natural
Playing Surface System Using Lightweight Portable
Apparatus
Training Emergency Medical Services Ambulance
Operations
Determining Energy Consumption of Nonimpact
Personal Computer Printers
Determining Energy Consumption of Facsimile
Machines
Evaluation of Granular Polysilicon by Melter-Zoner
Spectroscopes
High Purity Titanium Sputtering Targets for Electronic
Thin Film Applications
Trace Metallic Impurities in Electronic Grade Titanium
by High Mass-Resolution Glow Discharge Mass
Spectrometer
Measuring Sheet Resistance of Thin Film Conductors
for Flat Panel Display Manufacturing Using a FourPoint Probe Method
Steel Chain-Link Fencing Materials Used in Detention
and Correctional Facilities
Wrought Titanium-13Niobium-13Zirconium Alloy for
Surgical Implant Applications
Gravimetric Wear Assessment of Prosthetic HipDesigns in Simulator Devices
Gravimetric Wear Assessment of Prosthetic Knee
Designs in Simulator Devices
Transition and Performance of Marine Software
Systems Maintenance
Static and Fatigue for Spinal Implant Constructs in a
Corpectomy Model
Rotary Positive Displacement Fuel Pumps
Image-Interactive Stereotactic and Localization Systems
F 1721
F 1722
F 1728
F 1729
F 1723
F 1724
F 1730
F 1738
F 1742
F 1731
F 1732
F 1733
F 1734
F 1735
F 1736
F 1737
F 1739
F 1740
F 1749
F 1751
F 1741
F 1743
Determining Stability of Direct Thermal Imaging
Products
Determining Mass and Moment of Inertia of Alpine Skis
Standard Practice for Multiple Persons Cold Water
Survival/Rescue Technique: Huddle Position
Standard Practice for Single Person Cold Water
Survival/Rescue Technique: HELP Position
Evaluation of Polycrystalline Silicon Rods by FloatZone Crystal Growth and Spectroscopy
Measuring Surface Metal Contamination of
Polycrystalline Silicon by Acid Extraction-Atomic
Absorption Spectroscopy
Throwing a Water Rescue Throwbag
Deposition of Aerially Applied Oil Spill Dispersants
Standard Specification for PVC Insulating Sheeting
Body Measurements and Sizing of Fire and Rescue
Services Uniforms and Other Thermal Hazard Protective
Clothing
Poly(Vinyl Chloride) (PVC} Sewer and Drain Pipe
Containing Recycled PVC Material
Butt Heat Fusion Polyamide(PA) Plastic Fitting for
Polyamide(PA) Plastic Pipe and Tubing
Qualification of a Combination of Squeeze Tool, Pipe,
and Squeeze-Off Procedures to Avoid Long-Term
Damage in Polyethylene (PE) Gas Pipe
Poly (Vinyl Chloride) (PVC) Profile Strip for PVC
Liners for Rehabilitation of Existing Man-Entry Sewers
and Conduits
Irradiation of Finfish and Shellfish to Control Pathogens
and Spoilage Microorganisms
Guide for Use of oil Spill Dispersant Application
Equipment During Spill Response: Boom and Nozzle
Systems
Performance of a Water Rescuer--Level I
Inspection of Nylon, Polyester, or Nylon/Polyester
Blend, or Both Kernmantle Rope
Fitness Equipment and Fitness Facility Safety Signage
and Labels
Standard Specification Helmets Used in Recreational
Roller Skating
Installation of Machine Spiral Wound Poly (Vinyl
Chloride) (PVC) Liner Pipe for Rehabilitation of
Existing Sewers and Conduits
Practice for Rehabilitation of Existing Pipelines and
Conduits by Pulled-in-Place Installation of Cured-inPlace Thermosetting Resin Pipe [CIPP]
F 1744
F 1745
F 1747
F 1746
F 1748
F 1750
F 1752
F 1754
F 1755M
F 1753
F 1758
F 1759
F 1760
F 1761
F 1762
F 1763
F 1764
F 1765
F 1767
F 1771
F 1772
F 1773
F 1766
F 1768
F 1769
F 1770
Guide for Cure and Handling of Stainless Steel Surgical
Instruments
Test Method for External Fixator Connectors
Test Method for External Fixator Joints
Test Method for Determining In Plane Compressive
Properties of Circular Ring or Ring Segment Bridge
Elements
Test Method for External Fixator Subassemblies
Spcification for Paintball Gun Threaded-Propellant
Source Interface
Test Method for Archery Bow Component---Cord
Material
Marine Structural Inspection Considerations
Solid State Bargraph Meters for Shipboard Use [Metric]
Specilfication for Classification and Marking of SingleLens Scopes for Use with Archery Bows
Detention Hinges Used on Detention-Grade Swinging
Doors
Design of High-Density Polyethylene (HDPE)
Manholes for Subsurface Applications
Standard Specification for Coextruded Poly(Vinyl
Chloride) (PVC) Non-Pressure Plastic Pipe Having
Reprocessed-Recycled Content
Test Method for Pass Through Flux of Circular
Magnetic Sputtering Targets
Determining the Effects of Variation in Atmospheric
Pressure on a Membrane Switch
Test Method for Measuring Contrast of a Linear
Polarizer
Guide for Selection of Hardline Communication System
for Confined Space Rescue
Guide for Ice Staff Self- Rescue Technique
Forms Used for Search and Rescue
Evaluating Gate Oxide Integrity by Voltage Ramp
Technique
Climbing Harnesses
Climbing and Mountaineering Equipment and Practices
Guide for Ice Awls Self- Rescue Technique
Guide for Using Whistle Signals During Rope Rescue
Operations
Measurement of Diffusivity, Solubility, and
Permeability of Organic Vapor Barriers Using a Flame
Ionization Detector
Evaluation of Solubility, Diffusivity, and Permeability
of Flexible Barrier Materials to Water Vapor
F 1776
F 1777
F 1780
F 1781
F 1782
F 1783
F 1784
F 1785
F 1786
F 1787
F 1788
F 1789
F 1790
F 1793
F 1794
F 1795
F 1796
F 1797
F 1798
F 1799
F 18
F 180
F 1800
F 1801
F 1802
F 1803
F 1804
F 1805
Specification for Eye Protective Devices for Paintball
Sports
Paintball Field Operation
Guide for Estimating Oil Spill Recovery System
Effectiveness
Specification for Elastomeric Flexible Hinge Finger
Total Joint Implants
Amount of Ink Deposit on Fabric Type Ribbons
Performance of an Ice Rescuer---- Level II
Performance of a Pasta Cooker
Performance of Steam Kettles
Performance of Braising Pans
Performance of Rotisserie Ovens
Guide for In-Situ Burning of Oil Spills on Water:
Environmental and Operational Considerations
Standard Terminology for F-16 Mechanical Fasteners
Measuring Cut Resistance of Materials Used in
Protective Clothing
Automatic Shut-Off Valves (Also Known as Excess
Flow Valves, EFV) for Air or Nitrogen Service
Hand-Operated, Globe-Style Valves for Gas (Except
Oxygen Gas), and Hydraulic Systems
Pressure-Reducing Valves for Air or Nitrogen Systems
High Voltage Detectors - Part 1 Capacitive Type to be
Used for Voltages Exceeding 600 Volts AC
Acoustic Emission Testing og Insulated Digger Derricks
Evaluating the Static and Fatigue Properties of
Interconnection Mechanisms and Subassemblies Used in
Spinal Arthrodesis Implants
Shipboard Generated Waste Management Audits
Standard Specification and Test Method for Evaluation
of Glass-to-Metal Headers Used in Electron Devices
Test Method for Density of Fine Wire and Ribbon Wire
for Electronic Devices
Cyclic Fatigue Testing of Metal Tibial Tray
Components of Total Knee Joint Replacements
Corrosion Fatigue Testing of Metallic Implant Materials
Performance Testing of Excess Flow Valves
Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe
and Fittings Based on Controlled Inside Diameter
Determining Allowable Tensile Load for Polyethylene
(PE) Gas Pipe During Pull-In Installation
Standard Test Method for Single Wheel Driving
Traction in a Straight Line on Snow- and Ice-Covered
Surfaces
F 1808
F 1812
F 1814
F 1806
F 1807
F 1809
F 1810
F 1881
F 1813
F 1815
F 1816
F 1817
F 1818
F 1819
F 1820
F 1821
F 1822
F 1825
F 1826
F 1827
F 1828
F 1829
F 1831
F 1832
F 1833
Weight Control Technical Requirements for Surface
Ships
Determining the Effectiveness of Membrane Switch
ESD Sheilding
Evaluating Modular Hip and Knee Joint Components
Practice for Tire Testing Operations -- Basic Concepts
and Terminology for Reference Tire Use
Metal Insert Fittings Utilizing a Copper Crimp Ring for
SDR9 Cross-linked Polyethylene (PEX) Tubing
Selection and Use of Etching Solutions to Delineate
Structural Defects in Silicon
Counting Preferntially Etched or Decorated Surface
Defects in Silicon Wafers
Practice for Estimating the Power Spectral Density
Function and Related Finish Parameters from Surface
Profile Data
Specification for Wrought Titanium - 12 Molybdenum 6 Zirconium - 2 Iron Alloy For Surgical Implant
Applications
Saturated Hydraulic Conductivity, Water Retention,
Porosity, Particle Density, and Bulk Density of Putting
Green and Sports Turf Root Zones
Drawstrings on Children's Upper Outerwear
The Performance of Conveyor Ovens
Foot Protection for Chain Saw Users
Resistance of Materials Used in Protective Clothing to
Penetration by Synthetic Blood Using a Mechanical
Pressure Technique
Determining the Axial Disassembly Force of a Modular
Acetabular Device
Consumer Safety Specification for Toddler Beds
Consumer Safety Specification for Non-Full-Size Baby
Cribs
Fixed Length Clampstick Type Live Line Tools
Specification for Telescoping Live Line Tools
Terminology Relating to Food Service Equipment
Ureteral Stents
Static Evaluation of the Glenoid Locking Mechanism in
Shear
Cranial Traction Tongs and Halo External Spinal
Immobilization Devices
Determining the Force-Draw and Let-Down Curves for
Archery Bows
Comparison of Rearfoot Motion Control Properties of
Running Shoes
F 1834
F 1835
F 1836M
F 1837M
F 1838
F 1839
F 1840
F 1841
F 1842
F 1843
F 1844
F 1845
F 1846
F 1847
F 1848
F 1851
F 1849
F 1850
F 1852
F 1853
F 1854
F 1855
F 1856
F 1858
F 1859
Guide for Consideration of Anaerobic Bioremediation as
a Chemical Pollutant Mitigation Method on Land
Cable Splicing Installations
Specification for Stuffing Tubes, Nylon, and Packing
Assemblies (Metric)
Heat-Shrink Cable Entry Seals (Metric)
Child's Plastic Chairs for Outdoor Use
Rigid Polyurethane Foam for Use as a Standard Material
for Testing Orthopaedic Devices and Instruments
Surgical Suture Needles
Assessment of Hemolysis in Continuous Flow Blood
Pumps
Determining Ink or Coating Adhesion on Plastic
Substrates for Membrane switch Applications
Sample preparation of Transparent Plastic Flims for
Specular Gloss Measurements, on Membrane Switch
Overlays
Practice for Measuring Sheet Resistance of Thin Film
Conductors for Flat Panel Display Manufacturing Using
a Noncontact Eddy Current Gage
Trace Metallic Impurities in Electronic Grade
Aluminum-Copper, Aluminum-Silicon, and AluminumCopper-Silicon Alloys by High-Mass-Resolution Glow
Discharge mass Spectrometer
Symbols and Markings for Use With Land Search Maps
Demonstrating Minimum Skills of Search and Rescue
Dogs and Handlers
Search and Rescue Dog Crew/Teams
Bar Code Verification
Specification for Helmets Used in Short Track Speed Ice
Skating (Not to Include Hockey)
Particular Requirements for Anesthesia Workstations
and Their Components
Specification for "Twist Off" Type Tension Control
Structural Bolt/Nut/Washer Assemblies, Steel, Heat
Treated, 120/105 ksi Minimum Tensile Strength
Measuring Sleeping Bag Packing Volume
Stereological Evaluation of Porous Coatings on Medical
Implants
Polyoxymethylene (Acetal) for Medical Applications
Determining Toner Usage for Printer Cartridges
Multipositional Plastic Chairs with Adjustable Backs or
Reclining Mechanisms for Outdoor Use
Specification for Rubber Sheet Floor Covering Without
Backing
F 1860
F 1861
F 1862
F 1863
F 1864
F 1865
F 1866
F 1874
F 1877
F 1878
F 1879
F 1867
F 1868
F 1869
F 1871
F 1873
F 1875
F 1876
F 1880
F 1881
F 1882
F 1883
F 1884
F 1886
Specification for Rubber Sheet Floor Covering With
Backing
Specification for Resilient Wall Base
Test Method for Resistance of Medical Face Masks to
Penetration by Synthetic Blood (Horizontal Projection
of Fixed Volume at a Known Velocity)
Method for Measuring the Night Vision GoggleWeighted Transmissivity of Transparent Parts
Dust Erosion Resistance of Optical and Infrared
Transparent Materials and Coatings
Mechanical Cold Expansion Insert Fitting With
Compression Sleeve for Cross-Linked Polyehtylene
(PEX) Tubing
Poly (Vinyl Chloride) (PVC) Plastic Schedule 40
Drainage and DWV Fabricated Fittings
Bend Testing of Needles Used in Surgical Sutures
Characterization of Particles
Escort Vessel Evaluation and Selection
Demonstrating Obedience and Agility in Search and
Rescue Dogs
Installation of Folded/Formed Poly (Vinyl Chloride)
(PVC) Pipe Type A for Existing Sewer and Conduit
Rehabilitation
Thermal and Evaporative Resistance of Clothing
Materials Using a Sweating Hot Plate
Method for Measuring Moisture Vapor Emission Rate
of Concrete Subfloor Using Anhydrous Calcium
Chloride
Folded/Formed Poly (Vinyl Chloride) Pipe Type A for
Existing Sewer and Conduit Rehabilitation
High-Purity Dense Yttria Tetragonal Zirconium Oxide
Polycrystal (Y-TZP) for Surgical Implant Applications
Fretting Corrosion Testing of Modular Implant
Interfaces: Hip Femoral Head-Bore and Cone Taper
Interface
Polyetherketoneetherketoneketone (PEKEKK) Resins
for Surgical Implant Applications
Method for the Determination of Percent of Let-Off for
Archery Bows
Measuring Baseball Bat Performance Factor
Residential Basketball Systems
Selection of Wire and Cable Size in AWG or Metric
Units
Determining Residual Solvents in Packaging Materials
Test Method for Determining Integrity of Seals for
Medical Packaging by Visual Inspection
F 1887
F 1888
F 1889
F 1890
F 1891
F 1893
F 1892
F 1894
F 1895
F 1896
F 1897
F 1899
F 19
F 1900
F 1901
F 1903
F 1904
F 1905
F 1906
F 1908
F 1909
F 1910
F 1911
F 1912
F 1913
F1915
F 1918
F 1922
Measuring the Coefficient of Restitution (COR) of
Baseballs and Softballs
Compression-Displacement of Baseballs and Softballs
Straightness Measurement of Arrow Shafts
Measuring Softball bat Performance Factor
Standard Specification for Arc and Flame Resistant
Rainwear
Measurement of Ionizing Dose-Rate Burnout of
Semiconductor Devices
Ionizing Radiation (Total Dose) Effects Testing of
Semiconductor Devices
Method for Quantifying Tungsten Silicide
Semiconductor Process Films for Composition and
Thickness
Submersion of a Membrane Switch
Method for Determining the Electrical Resistivity of a
Printed Conductive Material
Leg Protection for Chain Saw Users
Food Waste Pulper Without Waterpress Assembly
Standard Test Method for Tension and Vacuum Testing
Metallized Ceramic Seals
Water Resistance of Footwear Using a Walking Step
Simulator
Polyethylene (PE) Pipe and Fittings for Roof Drain
Systems
Testing For Biological Responses to Particles In Vitro
Practice for Testing the Biological Responses to
Particles In Vivo
Selecting Tests for Determining The Propensity of
Materials To Cause Immunotoxicity
Evaluation of Immune Responses In Biocompatibility
Testing Using ELISA Tests, Lymphocyte Proliferation,
and Cell Migration
Fences for Residential Outdoor Swimming Pools, Hot
Tubs, and Spas
Performed Open-Cell Sponge Rubber Pail and Drum
Gaskets
Long Barbed Tape Obstacles
Installation of Barbed Tape
Safety of Bean Bag Chairs
Vinyl Sheet Floor Covering Without Backing
Standard Test Methods for Glazing for Detention
Facilities
Soft Contained Play Equipment
Tires, Pneumatic, Vehicular, Highway
F 1914
F 1916
F 1919
F 1920
F 1921
F 1923
F 1924
F 1925
F 1926
F 1927
F 1928
F 1929
F 1930
F 1931
F 1932
F 1933
F 1934
A 968/A 968M
F 1935
F 1936
F 1937
F 1938
F 1940
F 1941
Short-Term Indentation and Residual Indentation of
Resilient Floor Covering
Tires, Pneumatic, Low Speed, Off Highway
Griddles, Single and Double Sided, Self-heating,
Counter or Stand Mounted Gas and Electric Fired
Energy Performance of Rack Conveyor, Hot Water
Sanitizing, Commercial Dishwashing Machines
Hot Seal Strength (Hot Tack) of Thermoplastic
Polymers and Blends Comprising the Sealing Surfaces
of Flexible Webs
Tires, Pneumatic, Low Speed, Off Highway
Plastic Mechanical Fittings for Use on Outside Diameter
Controlled Polythylene Gas Distribution Pipe and
Tubing
Virgin Poly(L-Lactic Acid) Resin for Surgical Implants
Evaluation of the Environmental Stability of Calcium
Phosphate Coatings
Determination of Oxygen Gas Transmission Rate,
Permeability and Performance at Controlled Relative
Humidity Through Barrier Materials Using a
Coulometric Detector
Consumer Recreational Use of Fun-Karts
Detecting Seal Leaks in Porous Medical Packaging by
Dye Penetration
Test Method for Evaluation of Flame Resistant Clothing
for Protection Against Flash Fire Simulations Using an
Instrumented Manikin
Characterization of Gymnastic Landing Mats and Floor
Exercise Surfaces
Measuring Sleeping Bag Loft
Illustrating the Footprint of a Backpacking or
Mountaineering Tent
Weighing a Backpacking or Mountaineering Tent
Standard Specification for Chromium, ChromiumNickel, and Silicon Alloy Steel Bars and Shapes for
Corrosion and Heat-Resisting Service
Measuring the Peak Height of a Backpacking or
Mountaineering Tent
Shock-Absorbing Properties of North American
Football Field Playing Systems as Measured in the Field
Body Protectors Used in Horse Sports and Horseback
Riding
Safer Use of Movable Soccer Goals
Process Control Verification to Prevent Hydrogen
Embrittlement in Plated or Coated Fasteners
Specification for Electrodeposited Coatings on Threaded
F 1942
F 1943
F 1944
F 1945
F 1946
F 1947
F 1948
F 1949
F 1950
F 1952
F 1953
F 1955
F 1957
F 204
F 205
F 21
F 218
F 219
F 22
F 221
F 23
F 26
F 310
F 366
F 37
Fasteners (Unified Inch Screw Threads (UN/UNR))
Creating Test Targets for Determining the Ink Yield of
the Imaging Supplies Used in Ink Jet Printers
Determining the Dynamic Thermal Response of
Thermal Mass Transfer Ribbon Products - Atlantek
Method
Determining the Quality to the Text, Line- and SolidFill Output Produced by Ink Jet Printers
Determining the Lightfastness of Ink Jet Prints Exposed
to Indoor Fluorescent Lighting
Determining the Lightfastness of Ink Jet Prints Exposed
to Indoor Fluorescent Lighting and Window-Filtered
Daylight
Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe
into Existing Sewers and Conduits
Metallic Mechanical Fittings for Use on Outside
Diameter Controlled Thermoplastic Gas Distribution
Pipe and Tubing
Medical Oxygen Delivery Systems for EMS Ground
Vehicles
Physical Information to be Transferred With Used
Amusement Rides and Devices
Specification for Helmets Used for Downhill Mountain
Bicycle Racing
Construction and Maintenance of Grass Tennis Courts
Flammability of Sleeping Bags
Composite Foam Hardness-Durometer Hardness
Surface Flaws in Tungsten Seal Rod and Wire
Test Method for Measuring Diameter of Fine Wire by
Weighing
Hydrophobic Surface Films by the Atomizer Test
Standard Test Method for Analyzing Stress in Glass
Fine Round and Flat Wire for Electron Devices and
Lamps
Hydrophobic Surface Films by the Water-Break Test
Carbon Paper and Inked Ribbon Products and Images
Made Therefrom
Selecting Methods of Temperature Measurement of
Thermionic Emmitters
Determining the Orientation of a Semiconductive Single
Crystal
Standard Practice for Sampling Cryogenic Aerospace
Fluids
Standard Specification for Fixation Pins and Wires
Test Methods for Sealability of Gasket Materials
F 269
F 25
F 256
F 28
F 288
F 289
F 29
F 290
F3
F 30
F 301
F 382
F 428
F 43
F 302
F 303
F 306
F 307
F 309
F 31
F 318
F 319
F 436M
F 44
F 448
F 703
F 311
F 312
Sag of Tungsten Wire
Sizing and Counting Airborne Particulate
Contamination in Clean Rooms and Other DustControlled Areas Designed for Electronic and Similar
Applications
Chromium-Iron Sealing Alloys with 18 to 28 %
Chromium
Minority-Carrier Lifetine in Bulk Germanium and
Silicon by Measurement of Photoconductivity Decay
Tungsten Wire for Electron Devices and Lamps
Molybdenum Wire and Rod for Electronic Applications
Dumet Wire for Glass-to-Metal Seal Applications
Round Wire for Winding Electron Tube Grid Laterals
Nickel Strip for Electron Tubes
Iron-Nickel Sealing Alloys
Noncryogenic Fluid Systems, Open-Bottle Tap
Sampling
Metallic Bone Plates
Intensity of Scratches of Aerospace Glass Enclosures
Test Methods for Resistivity of Semiconductor
Materials
Standard Practice for Field Sampling of Aerospace
Fluids in Containers
Practice for Sampling Aerospace Fluids from
Components
Practice for Sampling Particulate from Man-Accessible
Storage Vessels for Aerospace Fluids by Vacuum
Entrainment Technique (General Method)
Sampling Pressurized Gas Analysis
Standard Practice for Liquid Sampling of Noncryogenic
Aerospace Propellants
42% Nickel-6% Chromium-Iron Sealing Alloy
Standard Practice for Sampling Airborne Particulate
Contamination in Clean Rooms for Handling Aerospace
Fluids
Polarized Light Detection of Flaws in Aerospace
Transparency Heating Elements
Specification for Hardened Steel Washers [Metric]
Standard Specification for Metallized Surfaces on
Ceramic
Measuring Steady-State Primary Photocurrent
Implantable Breast Prostheses
Processing Aerospace Liquid Samples for Particulate
Contamination Analysis Using Membran Fillers
Microscopical Sizing and Counting Particles from
F 320
F 326
F 327
F 328
F 330
F 331
F 335
F 336
F 34
F 355
F 356
D 6394
D 6404
D 6410
F 357
F 358
F 359
F 36
F 360
F 363
F 364
F 362
F 370
F 373
F 38
F 371
Aerospace Fluids on Membrane Filters
Test Method for Hail Impact Resistance of Aerospace
Transparent Enclosures
Standard Test Method for Electronic Measurement for
Hydrogen Embrittlement From Cadmium-Electroplating
Processes
Standard Practice for Sampling Gas Blow Down
Systems and Components for Particulate Contamination
by Automatic Particle Monitor
Calibration of an Airborne Particle Counter Using
Monodisperse Spherical Particles
Test Method for Bird Impact Testing of Aerospace
Transparent Enclosures
Nonvolatile Residue of Solvent Extract from Aerospace
Components (Using Rotary Flash Evaporator)
Electrostatic Copying
Design and Construction of Nonmetallic Enveloped
Gaskets for Corrosive Service
Construction of Test Cell for Liquid Extraction of
Flexible Barrier Materials
Shock-Absorbing Properties of Playing Surface Systems
and Materials
Beryllia Ceramics for Electronic and Electrical
Applications
Standard Specification for Sulfone Plastics (SP)
Standard Practice for Sampling Vegetable Materials
Containing Tannin
Standard Test Method for Determining Acidity of
Vegetable Tanning Liquors
Determining Solderability of Thick- Film Conductors
Wavelength of Peak Photoluminescence and the
Corresponding Composition of Gallium Arsenide
Phosphide Wafers
Static Immersion Testing of Unstressed Materials in
Nitrogen Tetroxide (N2O4)
Compressibility and Recovery of Gasket Materials
Image Evaluation of Electrostatic Business Copies
Corrosion Testing of Gaskets
Molybdenum Flattened Wire for Electron Tubes
Determining the Erasability of Inked Ribbons
Proximal Femoral Prosthesis
Standard Test Method for Embossed Depth of Resilient
Floor Coverings
Test Methods for Creep Relaxation of a Gasket Material
Compatibility of Materials With Liquid Oxygen
F 372
F 374
F 375
F 377
F 381
F 384
F 386
F 387
F 390
F 395
F 399
F 400
F 391
F 392
F 394
F 396
F 397
F4
F 403
F 398
F 402
F 412
F 42
(Reaction Intensity Method)
Water Vapor Transmission Rate of Flexible Barrier
Materials Using an Infrared Detection Technique
Standard Test Method for Sheet Resistance of Silicon
Epitaxial, Diffused, Polysilicon, and Ion-implanted
Layers Using an In-Line Four-Point Prob
Integrated Cricuit Lead Frame Material
Calibration of Braking Force for Testing of Pneumatic
Tires
Components Assembly, Use, and Labeling of Consumer
Trampolines
Standard Specifications and Test Methods for Metallic
Angled Orthopedic Fracture Fixation Devices
Thickness of Resilient Flooring Materials Having Flat
surfaces
Measuring Thickness of Resilient Floor Covering with
Foam Layer
Sheet Resistance of Thin Metallic Films with a Collinear
Four-Probe Array
Terminology Relating to Vacuum Cleaners
Standard Test Method for Thickness of Heteroepitaxial
or Polysilicon Layers
Standard Consumer Safety Specification for Lighters
Minority-Carrier Diffusion Length in Extrinsic
Semiconductors by Measurement of Steady-State
Surface Photovoltage
Flex Durability of Flexible Barrier Materials
Biaxial Flexure Strength (Modulus of Rupture) of
Ceramic Substrates
Comparing One-Time Noncorrectable Typewriter
Ribbons
Resistivity of Silicon Bars Using a Two-Point Probe
Specification for Carbonized Nickel Strip and
Carbonized Nickel-Plated and Nickel-Clad Steel Strip
for Electron Tubes
Tires for Wet Traction in Straight-Ahead Braking, Using
Highway Vehicles
Majority Carrier Concentration in Semiconductors by
Measurement of Wavelength of the Plasma Resonance
Minimum
Safe Handling of Solvent Cements, Primers, and
Cleaners Used for Joining Thermoplastic Pipe and
Fittings
Standard Terminology Relating to Plastic Piping
Systems
Conductivity Type of Extrinsic Semiconducting
F 421
F 404
F 405
F 406
F 408
F 409
F 410
F 413
F 414
F 415
F 417
F 418
F 419
F 420
F 423
F 424
F 425
F 429
F 430
F 431
F 432
F 433
F 436
F 434
F 437
F 438
Materials
Test Method for Measuring Groove and Void Depth in
Passenger Car Tires
High Chairs
Corrugated Polyethylene (PE) Tubing and Fittings
Play Yards
Tires for Wet Traction in Straight-Ahead Braking, Using
a Towed Trailer
Thermoplastic Accessible and Replaceable Plastic Tube
and Tubular Fittings
Wear Layer Thickness of Resilient Floor Coverings by
Optical Measurement
Preparation on an Offset Duplicator for Use in
Functional Testing of Lithographic Copy Products
Standard Test Method for Energy Absorbed by a Tire
When Deformed by a Slow-Moving Plunger
Curl in Carbon Paper
Flexural Strength (Modulus of Rupture) of ElectronicGrade Ceramics
Preparation of Samples of the Constant Composition
Region of Epitaxial Gallium Arsenide Phosphide for
Hall Effect Measurements
Determining Carrier Density in Silicon Epitaxial Layers
by Capacitance-Voltage Measurements on Fabircated
Junction or Schottky Diodes
Access Depth Under Furniture of Vacuum Cleaners
Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous
Metal Pipe, Fittings, and Flanges
Tires for Wet Driving Traction in Straight-Ahead
Motion Using Highway Vehicles
Lithographic Copy Products
Test Method for Shock-Attenuation Characteristics of
Protective Headgear for Football
Paper Used for Vacuum Cleaner Filter Bags
Air Performance Measurement Plenum Chamber for
Vacuum Cleaners
Standard Specification for Roof and Rock Bolts and
Accessories
Evaluating Thermal Conductivity of Gasket Materials
Standard Specification for Hardened Steel Washers
Blow-Out Testing of Preformed Gasket
Threaded Chlorinated Poly(Vinyl Chloride) (CPVC)
Plastic Pipe Fittings, Schedule 80
Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC)
Plastic Pipe Fittings, Schedule 40
F 439
F 441/F 441M
F 442/F 442M
F 444
F 445
F 446
F 448M
F 462
F 467
F 467M
F 449
F 450
F 451
F 452
F 458
F 468
F 468M
F 470
F 457
F 459
F 506
F 513
F 520
F 471
F 472
F 473
F 474
Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC)
Plastic Pipe Fittings, Schedule 80
Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe,
Schedules 40 and 80
Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe
(SDR-PR)
Consumer Safety Specification for Scald-Preventing
Devices and Systems in Bathing Areas
Consumer Safety Specification for Thermal-ShockPreventing Devices and Systems in Showering Areas
Consumer Safety Specification for Grab Bars and
Accessories Installed in the Bathing Area
Measuring Steady-State Primary Photocurrent (Metric)
Consumer Safety Specification for Slip-Resistant
Bathing Facilities
Standard Specification for Nonferrous Nuts for General
Use
Standard Specification for Nonferrous Nuts for General
Use [Metric]
Subsurface Installation of Corrugated Thermoplastic
Tubing for Agricultural Drainage or Water Table
Control
Vacuum Cleaner Hose-Durability and Reliability
(Plastic Wire Reinforced)
Acrylic Bone Cement
Preformed Cranioplasty Plates
Nondestructive Pull Testing of Wire Bonds
Standard Specification for Nonferrous Bolts, Hex Cap
Screws, and Studs for General Use
Standard Specification for Nonferrous Bolts, Hex Cap
Screws, and Studs for General Use [Metric]
Caking Temperature of Dry Electrostatic Toner
Speed and Distance Calibration of a Fifth Wheel
Equipped With Either Analog or Digital Instrumentation
Measuring Pull Strength of Microelectronic Wire Bonds
Assessing the Quality of Direct-Image Paper Offset
Masters
Safety Specification for Eye and Face Protective
Equipment for Hockey Players
Environmental Resistance of Aerospace Transparencies
Combination Locks
Geometry of Alpine Skis
Binding Mounting Area Dimensions on Alpine Skis and
Bindings
Static Screw Retention Strength of Binding Mounting
F 475
F 476
F 477
F 478
F 479
F 521
F 523
F 568M
F 603
F 480
F 481
F 482
F 483
F 485
F 486
F 488
F 484
F 487
F 489
F 491
F 492
F 494
F 495
F 496
F 497
Area on Alpine Skis
Test Screw Used in Screw-Retention Test of Binding
Mounting Area on Alpine Skis
Security of Swinging Door Assemblies
Elastomeric Seals (Gaskets) for Joining Plastic Pipe
In-Service Care of Insulating Line Hose and Covers
Standard Specification for In-Service Care of Insulating
Blankets
Bond Integrity of Transparent Laminates
Unaided Visual Inspection of Polished Silicon Wafer
Surfaces
Carbon and Alloy Steel Externally Threaded Metric
Fasteners
Specification for High-Purity Dense Aluminum Oxide
for Medical Application
Specification for Thermoplastic Well Casing Pipe and
Couplings Made in Standard Dimension Ratios (SDR),
SCH 40 and SCH 80
Installation of Thermoplastic Pipe and Corrugated
Tubing in Septic Tank Leach Fields
Corrosion of Aircraft Metals by Total Immersion in
Maintenance Chemicals
Total Immersion Corrosion Test for Aircraft
Maintenance Chemicals
Effects of Cleaners on Unpainted Aircraft Surfaces
Standard Practice for Preparation of Use and Care
Booklets for Vacuum Cleaners
On-Site Screening of Heterotrophic Bacteria in Water
Stress Crazing of Acrylic Plastics in Contact with Liquid
or Semi-Liquid Compounds
Fine Aluminum-1% Silicon Wire for Semiconductor
Lead-Bonding
Static Coefficient of Friction of Shoe Sole and Heel
Materials as Measured by the James Machine
Specification for Poly[Vinylidene Fluoride] [PVDF]
Plastic- Lined Ferrous Metal Pipe and Fittings
Propylene and Polypropylene (PP) Plastic-Lined Ferrous
Metal Pipe and Fittings
Evaluating Primary Disposable Bag Intergrity for
Vacuum Cleaners
Weight Loss of Gasket Materials Upon Exposure to
Elevated Temperatures
Standard Specification for In-Service Care of Insulating
Gloves and Sleeves
Use of the Electric Typewriter as a Test Instrument
F 498
F 50
F 502
F 504
F 505
F 508
F 509
F 510
F 511
F 519
F 540
F 541
F 512
F 524
F 550
F 558
F 525
F 526
F 528
F 528M
F 533
F 534
F 536
F 537
F 538
F 539
F 542
Center Spring Constant and Spring Constant Balance of
Alpine Skis
Continuous Sizing and Counting of Airborne Particles in
Dust-Controlled Areas and Clean Rooms Using
Instruments Capable of Detecting Single SubMicrometre and Larger Particles
Effects of Cleaning and Chemical Maintenance
Materials on Painted Aircraft Surfaces
Test Method for Measuring the Quasi-Static Release
Moments of Alpine Ski Bindings
Comparative Evaluation of the Imaging Properties of
Liquid Electrostatic Toners
Specifying Thick-Film Pastes
Testing One-Time Carbonizing Tissue for Pinholes
Resistance to Abrasion of Resilient Floor Coverings
Using an Abrader with a Grit Feed Method
Quality of Cut (Joint Tightness) of Reailient Floor Tile
Test Method for Mechanical Hydrogen Embrittlement
Evaluation of Plating Processes and Service
Environments
Squareness of Resilient Floor Tile by Dial Gage Method
Specification for Alloy Steel Eyebolts
Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and
Fittings for Underground Installation
Measuring Beam Divergence of Pulsed Lasers by the
Apertured-Detector Technique
Lithographic Properties of Imaging Materials
Measuring Air Performance Characteristics of Vacuum
Cleaners
Standard Test Method for Measuring Resistivity of
Silicon Wafers Using a Spreading Resistance Probe
Measuring Dose for Use in Linear Accelerator Pulsed
Radiation Effects
Test Method of Measurement of Common-Emitter D-C
Current Gain of Junction Transistors
Measurement of Common-Emitter D-C Current Gain of
Junction Transistors (Metric)
Thickness and Thickness Variation of Silicon Wafers
Bow of Silicon Slices
Size of Resilient Floor Tile by Dial Gage Method
Design, Fabrication, and Installation of Fences
Constructed of Wood and Related Materials
Characteristics and Performance of Tires
Fitting of Athletic Foodwear
Exothermic temperature of encapsulating compounds for
F 543
F 545
F 546
F 547
F 548
F 551
F 552
F 555
F 549
F 556
F 559
F 560
F 561
F 562
F 563
F 564
F 565
F 567
F 568
F 571
F 593
F 601
F 572
F 576
F 577
F 584
F 585
Electronic and Microelectronic Encapsulation
Standard Specification and Test Methods for Metallic
Medical Bone Screws
PVC and ABS Injected Solvent Cemented Plastic Pipe
Joints
Perfluoro(Ethylene-Propylene) Copolymer (FEP)
Plastic-Lined Ferrous Metal Pipe and Fittings
Use with Wood and Wood-Base Materials
Standard Test Method for Intensity of Scratches on
Aerospace Transparent Plastics
Practice for Using a 67.23-in. (1.707-m) Diameter
Laboratory Test Roadwheel in Testing Tires
Terminology Relating to Chain Link Fencing
Motor Life Evaluation of an Upright Vacuum Cleaner
Terms Relating to Carbonless Copy Products
Curl of Carbonless Copy Papers
Test Method for Measuring Length of Road Test
Courses Using a Fifth Wheel
Unalloyed Tantalum for Surgical Implant Applications
Retrieval and Analysis of Implanted Medical Devices,
and Associated Tissues
Specification for Wrought Cobalt-35 Nickel-20
Chromium-10 Molybdenum Alloy for Surgical Implant
Applications UNS R
Standard Specification for Wrought Cobalt-20 Nickel-20
Chromium-3.5 Molybdenum-3.5 Tungsten-5 Iron Alloy
for Surgical Implant Applications (UNS R
Bone Staples
Standard Practice for Care and Handling of Orthopedic
Implants and Instruments
Installation of Chain-Link Fence
Carbon and Alloy Steel Externally Threaded Metric
Fasteners
Installation of Exist Devices in Security Areas
Stainless Steel Bolts, Hex Cap Screws, and Studs
Fluorescent Penetrant Inspection of Metallic Surgical
Implants
Application of Film Security Cameras in Financial
Institutions
Standard Test Method for Measurement of Insulator
Thickness and Refractive Index on Silicon Substrates by
Ellipsometry
Particle Size Measurement of Dry Toners
Visual Inspection of Semiconductor Lead Bonding Wire
Standard Practice for Insertion of Flexible Polyethylene
F 588
F 589
F 590
F 592
F 594
F 595
F 596
F 597
F 598
F 599
F 602
F 604
F 605
F 606
F 606M
F 623
F 639
F 641
F 654
F 607
F 608
F 609
F 610/F 610M
F 613
F 616
Pipe Into Existing Sewers
Measuring the Forced Entry Resistance of Windows
Assemblies, Excluding Glazing Impact
Non-Powder Guns
Consumer Safety Specification for Non-Powder Gun
Projectiles and Propellants
Standard Terminology of Collated and Cohered
Fasteners and Their Application Tools
Stainless Steel Nuts
Vacuum Cleaner Hose-Durability and Reliability (AllPlastic Hose)
Comparative of the Imaging Properties of Dry
Electrostatic Toners
Evaluation of One-Time Carbon Paper in CarbonInterleaved Business Forms by Use of an Electric
Typewriter
Practice for Determining the Resistance of Carbonless
Papers to Capsular Damage
Poly(Vinylidene Chloride) (PVDC) Plastic-Lined
Ferrous Metal Pipe and Fittings
Implantable Thermoset Epoxy Plastics
Elastomers Used in Medical Applications
Determining the Compatibility of One-Time Carbon
Paper with Carbonless Copy Papers When Interleaved
into the Same Manifold Set
Standard Test Methods for Determining the Mechanical
Properties of Externally and Internally Threaded
Fasteners, Washers, and Rivets
Determining the Mechanical Properties of Externally
and Internally Threaded Fasteners, Washers, and Rivets
[Metric]
Performance Specification for Foley Catheter
Polyethylene Plastics for Medical Applications
Implantable Epoxy Electronic Encapsulants
Residential Chain Link Fence Gates
Adhesion of Gasket Materials to Metal Surfaces
Evaluation of Carpet-Embedded Dirt Removal
Effectiveness of Household Vacuum Cleaners
Static Slip Resistance of Footwear Sole, Heel, or
Related Materials by Horizontal Pull Slipmeter (HPS)
Standard Test Method for Evaluating the Quality of
Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe
Fittings by the Heat Reversion Technique
Measuring Diameter of Semiconductor Wafers
Measuring MOSFET Drain Leakage Current
F 616M
F 617M
F 665
F 615M
F 702
F 619
F 620
F 621
F 622
F 624
F 625
F 626
F 627
F 628
F 629
F 631
F 637
F 638
F 640
F 645
F 647
F 648
F 653
F 655
F 657
A 900/A 900M
Measuring MOSFET Drain Leakage Current [Metric]
Measuring MOSFET Linear Threshold Voltage (Metric)
Vinyl Chloride Plastics Used in Biomedical Application
Determining Safe Current Pulse Operating Regions for
Metallization on Semiconductor Components (Metric)
Standard Specification for Polysulfone Resin for
Medical Applications
Extraction of Medical Plastics
Specification for Alpha Plus Beta Titanium Alloy
Forgings for Surgical Implants
Stainless Steel Forgings for Surgical Implants
Preformed Cranioplasty Plates That Can Be Altered
Standard Guide for Evaluation of Thermoplastic
Polyurethane Solids and Solutions for Biomedical
Applications
Standard Practice for Classifying Water Bodies for Spill
Control Systems
Fence Fittings
Testing Flake of One-Time Film Typewriter Ribbons
Specification for Acrylonitrile-Butadiene-Styrene (ABS)
Schedule 40 Plastic Drain, Waste, and Vent Pipe With a
Cellular Core
Radiography of Cast Metallic Surgical Implants
Collecting Skimmer Performance Data in Controlled
Environments
Format., Phyical Properties, and Test Methods for 19
and 35-mm Testable Tape Carrier for Perimeter TapeCarrier-Bonded SemiconductorDevices
Fine Aluminium-1% Magnesium Wire for
Semiconductor Lead-Bonding
Standard Test Methods for Radiopacity of Plastics for
Medical Use
Selection, Design, and Installation of Thermoplastic
Water Pressure Piping Systems
Standard Practice for Evaluating and Specifying
Implantable Shunt Assemblies for Neurosurgical
Application
Ultra-High-Molecular-Weight Polyethylene Powder and
Fabricated Form for Surgical Implants
Evaluation of Electrostatic Masters
Test Carpets and Pads for Vacuum Cleaner Testing
Measuring Warp and Total Thickness Variation on
Silicon Wafers by Noncontact Scanning
Standard Test Method for Lamination Factor of
Amorphous Magnetic Strip
F 649
F 656
F 658
F 659
F 660
F 661
F 662
F 667
F 674
F 681
F 682
F 668
F 67
F 670
F 671
F 672
F 673
F 676
F 679
F 68
F 680
F 683
F 677
Practice for Secondary Calibration of Airborne Particle
Counter Using Comparison Procedures
Primers for Use in Solvent Cement Joints of Poly(Vinyl
Chloride) (PVC) Plastic Pipe and Fittings
Standard Practice for Calibration of a Liquid-Borne
Particle Counter Using an Optical System Based Upon
Light Extinction
Skier Goggles and Faceshields
Comparing Particle Size in the Use of Alternative Types
Particle Counters
Particle Count and Size Distribution Measurement in
Batch Samples for Filter Evaluation Using an Optical
Particle Counter
Measurement of Particle Count and Size distribution in
Batch Samples for Filter Evaluation Using an Electrical
Resistance Particle Counter
Large Diameter Corrugated Polyethylene Tubing and
Fittings
Preparing Silicon for Spreading Resistance
Measurements
Branch Connections
Wrought Carbon Steel Sleeve-Type Pipe Couplings
Ploy (Vinyl Chloride) (PVC)-Coated Steel Chain-Link
Fence Fabric
Specification for Unalloyed Titanium, for Surgical
Implant Applications (UNS R50250, UNS R50400,
UNS R50550, UNS R50700)
Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing
Test Method for Measuring Flat Length on Wafers of
Silicon and Other Electronic Materials
Measuring Resistivity Profiles Perpendicular to the
Surface of a Silicon Wafer Using a Spreading
Resistance Probe
Measuring Resistivity of Semiconductor Slices or Sheet
Resistance of Semiconductor Films with a Noncontact
Eddy-Current Gage
Measuring Unsaturated TTL Sink Current
Standard Specification for Poly(Vinyl Chloride) (PVC)
Large-Diameter Plastic Gravity Sewer Pipe and Fittings
Oxygen-Free Copper in Wrought Forms for Electron
Devices
Nails
Standard Practice for Selection and Application of
Thermal Insulation for Piping and Machinery
Fluid and Grease Resistance of Thermoset
Encapsulating Compounds Used in Electronic and
F 685
F 686
F 688
F 689
F 690
F 692
F 696
F 697
F7
F 693
F 694
F 695
F 698
F 699
F 700
F 701
F 704
F 717
F 721
F 722
F 726
F 707/F 707M
F 708
F 706
F 71
Microelectronic Applications
Determining Toner Usage, Efficiency, and Dusting
Nonheat Fixing Copiers Using Single-Component Toner
Systems
Evaluation of Image Quality Produced by Carbonless
Copy Paper with an Electric Typewriter
Standard Specification for Wrought Cobalt-35 Nickel-20
Chromium-10 Molybdenum Alloy Plate, Sheet, and Foil
for Surgical Implants (UNS R30035)
Determination of the Temperature of Above-Ground
Plastic Gas Pressure Pipe Within Metallic Castings
Underground Installation of Thermoplastic Pressure
Piping Irrigation Systems
Preparing Photoplates for Measuring Flatness Deviation
Leather Protectors for Rubber Insulating Gloves and
Mittens
Practice for Care and Use of Athletic Mouth Protectors
Standard Specification for Aluminum Oxide Powder
Standard Practice for Sealing Seams of Resilient Sheet
Flooring Products by Use of Liquid Seam Sealers
Heel-Attaching Strength of Women's Shoes
Evaluation of Test Data Obtained by Using the
Horizontal Pull Slipmeter (HPS) or the James Machine
for Measurement of Static Slip Resistance of Foodwear
Sole, Heel, or Related Materials
Physical Information to be Provided for Amusement
Rides and Devices
Standard Practice for Accelerated Conditioning of
Polybutylene Pipe and Tubing for Subsequent Quality
Control Testing
Care and Handling of Intracranial Aneurysm Clips and
Instruments
Care and Handling of Neurosurgical Implants and
Instruments
Selecting Bolting Lengths for Piping System Flanged
Joints
Specification for Football Helmets
Gage Piping Assemblies
Welded Joints for Shipboard Piping Systems
Sorbent Performance of Adsorbents
Modular Gage Boards
Design and Installation of Rigid Pipe Hangers
Determination of Fusion Temperature of Dry
Electrostatic Heat Toners
Practice for Using the Morphological Key for the Rapid
F 710
F 711
F 712
F 714
F 715
F 716
F 718
F 770
F 811
F 840
F 719
F 72
F 720
F 723
F 724
F 725
F 728
F 73
F 732
F 756
F 760
F 767
F 733
F 734
F 735
Identification of Fibers for Contamination Control in
Electron Devices and Microelectronics
Preparing Concrete Floors to Receive Resilient Flooring
Specification for Fiberglass-Reinforced Plastic (FRP)
Rod and Tube Used in Live Line Tools
Standard Test Methods for Electrically Insulating Plastic
Guard Equipment for Protection of Workers
Standard Specification for Polyethylene (PE) Plastic
Pipe (SDR-PR) Based on Outside Diameter
Spill Control Barrier Membrane Materials
Testing Sorbent Performance of Absorbents
Shipbuilders and Marine Paints and Coatings
Product/Procedure Data Sheet
Practice for Operation Procedures for Amusement Rides
and Devices
Standard Practice for Accelerometer Use in Vehicles for
Tire Testing
Ladders, Fixed, Vertical, Steel, Ship's
Testing Biomaterials in Rabbits for Primary Skin
Irritation
Gold Wire for Semiconductor Lead-Bonding
Testing Guinea Pigs for Contact Allergens: Guinea Pig
Maximization Test
Conversion Between Resistivity and Dopant Density for
Boron-Doped and Phosphorus-Doped Silicon
Test Method for Outdoor Evaluation of Tire Sidewall
Component Cracking Resistance
Drafting Impact Test Requirements in Thermoplastic
Pipe and Fittings Standards
Preparing an Optical Microscope for Dimensional
Measurements
Tungsten-Rhenium Alloy Wire for Electron Devices and
Lamps
Practice for Pin-on-Flat Wear Test for Polymeric
Materials Used in Total Joint Prostheses which
Experience Linear Reciprocating
Standard Practice for Assessment of Hemolytic
Properties of Materials
Specification for Food Service Equipment Manuals
Image Stability of Chemical Carbonless Paper to Light
Optical Distortion and Deviation of Transparent Parts
Using the Double-Exposure Method
Shear Strength of Fusion Bonded Polycarbonate
Aerospace Glazing Material
Abrasion Resistance of Transparent Plastics and
F 736
F 737
F 738M
F 739
F 740
F 743
F 744
F 883
F 970
F 744M
F 745
F 746
F 747
F 748
F 749
F 75
F 754
F 755
F 757
F 758
F 750
F 751
F 76
Coatings Using the Oscillating Sand Method
Impact Resistance of Monolithic Polycarbonate Sheet by
Means of a Falling Weight
Ice Hockey Skate Blades
Standard Specification for Stainless Steel Metric Bolts,
Screws, and Studs
Resistance of Protective Clothing Materials to
Permeation by Liquids or Gases Under Conditions of
Continuous Contact
Terms Relating to Filtration
Measuring Contrast Ratio of a Pair of Linear Polarizers
for Visible Radiation
Measuring Dose Rate Threshold for Upset of Digital
Integrated Circuits
Performance Specification for Padlocks
Standard Test Method for Static Load Limit
Test Method for Measurement Does Rate Threshold for
Upset of Digital Integrated Circuits [ Metric]
Standard Specification for 18 Chromium-12.5 Nickel2.5 Molybdenum Stainless Steel for Cast and SolutionAnnealed Surgical Implant Applications
Test Method for Pitting or Crevice Corrosion of Metallic
Surgical Implant Materials
Amusement Rides and Devices
Selecting Generic Biological Test Method for Materials
and Devices
Evaluating Material Extracts by Intracutaneous Injection
in the Rabbit
Cobalt-28 Chromium-6 Molybdenum Casting Alloy and
Cast Products for Surgical Implants (UNS R30075)
Specification for Implantable Polytetrafluoroethylene
(PTFE) Polymer Fabricated in Sheet, Tube, and Rod
Shapes
Standard Specification for Selection of Porous
Polyethylene for Use in Surgical Implants
Test Method for Determining Energy Consumption of
Copier and Copier-Duplicating Equipment
Standard Specification for Smooth-Wall Poly(Vinyl
Chloride) (PVC) Plastic Underdrain Systems for
Highway, Airport, and Similar Drainage
Evaluating Material Extracts by Systemic Injection in
the Mouse
Measuring Particle Size of Wide-Size Range Dry Toners
Measuring Resistivity and Hall Coefficient and
Determining Hall Mobility in Single Crystal
Semiconductors
F 761
F 762
F 763
F 764
F 765
F 766
F 769M
F 77
F 771
F 773
F 773M
F 778
F 779
F 78
F 783
F 79
F 803
F 782
F 790
F 780
F 781
F 788/F 788M
F 789
F 791
F 792
F 793
Strength Requirements of Steel Posts and Rails for
Residential Chain-Link Fence
Test Method for Determining Change in Groove (or
Void) Depth With Distance Traveled for Passenger Car
Tires
Short-Term Screening of Implant Materials
Compatibility of Materials with High-Energy
Propellants (Impact Sensitivity Threshold Technique)
Wildcats, Ship Anchor Chain
Melting Point of Waxes
Measuring Transistor and Diode Leakage Currents
[Metric]
Apparent Density of Ceramics for Electron Device and
Semiconductor Application
Polyethylene (PE) Thermoplastic High-Pressure
Irrigation Pipeline Systems
Measuring Dose Rate Response of Linear Integrated
Circuits
Measuring Dose Rate Response of Linear Integrated
Circuits [Metric]
Standard Methods for Gas Flow Resistance Testing of
Filtration Media
Torsion Characteristic of Alpine Skis
Calibration of Helium Leak Detectors by Use of
Secondary Standards
Staple, Handgrab, Handle, and Stirrup Rung
Standard Specification for Type 101 Sealing Glass
Standard Specification for Eye Protectors for Selected
Sports
Doors, Furniture, Marine
Testing Materials for Aerospace Plastic Transparent
Enclosures
Linear Deformation and Breaking Strength of Alpine
Skis
Perfluoro (Alkoxyalkane) Copolymer (PFA) PlasticLined Ferrous Metal Pipe and Fittings
Surface Discontinuities of Bolts, Screws, and Metric
Series
Type PS-46 Poly(Vinyl Chloride) (PVC) Plastic Gravity
Flow Sewer Pipe and Fittings
Stress Crazing of Transparent Plastics
Design and Use of Ionizing Radiation Equipment for the
Detection of Items Prohibited in Controlled Access
Areas
Classification of Wallcovering by Durability
F 794
F 795
F 796
F 797
F 798
F 799
F 801
F 802
F 807
F 809/F 809M
F 81
F 815
F 806
F 810
F 812/F 812M
F 813
F 816
F 819
F 834
F 836M
F 818
F 820
F 821
F 822
F 823
F 824
Characteristics
Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe
and Fittings Based on Controlled Inside Diameter
Determining the Performance of a Filter Medium
Employing a Single-Pass, Constant-Rate, Liquid Test
Determining the Performance of a Filter Mediium
Employing a Single-Pass, Constant-Pressure, Liquid
Test
Determining the Performance of a Filter Medium
Employing a Multipass, Constant-Rate, Liquid Test
Determining Gettering Rate, Sorption Capacity, and Gas
Content of Nonevaporable Getters in the Molecular
Flow Region
Cobalt-28 Chromium-6 Molybdenum Alloy Forgings
for Surgical Implants (UNSR31537)
Measuring Optical Angular Deviation of Transparent
Parts
Selection of Certain Walkway Surfaces When
Considering Foodwear Traction
Determining Resolution Capability of Office Copiers
Large Diameter Polybutylene Plastic Pipe
Standard Test Method for Measuring Radial Resistivity
Variation on Silicon Wafers
Detection of Epitaxial Spikes
Compressibility and Recovery of Laminated Composite
Gasket Materials
Smoothwall Polyethylene (PE) Pipe for Use in Drainage
and Waste Disposal Absorption Fields
Surface Discontinuities of Nuts, Inch and Metric Series
Direct Contact Cell Culture Evaluation of Materials for
Medical Devices
Combined Fine and Gross Leaks for Large Hybrid
Microcircuit Packages
Definitions of Terms Relating to Electrical Protective
Equipment for Workers
Consumer Safety Specification for Toy Chests
Standard Specification for Style 1 Stainless Steel Metric
Nuts
Spill Response Barriers
Measuring Air Performance Characteristics of
Residential Central Vacuum Cleaning Systems
Doors and Frames, Steel, Interior, Marine
Chest of Drawers (Chiffonier), Steel, Marine
Desk, Log, Marine, Steel, with Cabinet
Tables, Mess, Marine, Steel
F 825
F 826
F 83
F 832
F 833
F 835
F 835M
F 837
F 837M
F 838
F 839
F 84
F 841
F 842
F 844
F 853
F 854
F 86
F 843
F 845
F 846
F 847
F 85
F 851
F 852
F 855
Drawers, Furniture, Marine, Steel
Tops, Furniture, Marine, Steel
Definition and Determination of Thermionic Constants
of Electron Emitters
Security Seals
Standard Consumer Safety Performance Specification
for Carriages and Strollers
Specification for Alloy Steel Socket Button and Flat
Countersunk Head Cap Screws
Specification for Alloy Steel Socket Button and Flat
Countersunk Head Cap Screws [Metric]
Stainless Steel Socket Head Cap Screws
Standard Specification for Stainless Steel Socket Head
Cap Screws [Metric]
Determining Bacterial Retention of Membran Filters
Utilized for Liquid Filtration
Cautionary Labeling of Portable Gasoline Containers for
Consumer Use
Test Method for Measuring Resistivity of Silicon
Wafers With an In-Line Four-Point Probe
Thrusters, Tunnel, Permanently Installed in Marine
Vessels
Measuring the Forced Entry Resistance of Sliding Door
Assemblies Excluding Glazing Impact
Specification for Washers, Steel, Plain (Flat),
Unhardened for General Use
Maintenance Procedures for Amusement Rides and
Devices
Cleanliness of Carbon Paper
Standard Terminology Relating to Athletic Shoes and
Biomechanics
Assessing the Color Strength and Dispersibility of
Alkali Blue Pigment in Hot Melt Carbon Copy Paper
Copy Paper Ink
Plastic Insert Fittings for Polybutylene (PB) Tubing
Tesing Performance of Amusement Rides and Devices
Measuring Crystallographic Orientation of Flats on
Single Crystal Silicon Wafers by X-Ray Techniques
Nomenclature for Wire Leads Used as Conductors in
Electron Tubes
Self-Rising Seat Mechanisms
Portable Gasoline Containers for Consumer Use
Specifications for Temporary Protective Grounds to Be
Used on De-energized Electric Power Lines and
Equipment
F 856
F 857
F 869
F 880M
F 881
F 861
F 868
F 870
F 858
F 859
F 860
F 862
F 865
F 871M
F 876
F 88
F 880
F 872
F 873
F 874
F 875
F 877
F 878
F 879
Mechanical Symbols, Shipboard--Heating, Ventilation,
and Air Conditioning (HVAC)
Hot Water Sanitizing Commercial Dishwashing
Machines, Stationary Rack Type
Terminology Relating to Athletic Shoes and
Biomechanics
Standard Specification for Stainless Steel Socket Set
Screws [Metric]
Standard Specification for Silicone Elastomer Facial
Implants
Commercial Dishwashing Racks
Laminated Composite Gasket Materials
Practice for Tread Footprints of Passenger Car Tires
Groove Area Fraction and Dimensional Measurements
Hot Water Sanitizing Commercial Dishwashing
Machines, Single tank, Conveyor Rack Type
Heat Sanitizing Commercial Dishwashing Machines,
Multiple Tank, Conveyor Rack Type
Hot Water Sanitizing Commercial Dishwashing
Machines, Multiple Tank, Rackless Conveyor Type
pH and Chloride-Ion Concentration of Aerospace
Hydraulic Fluids
Gross Camber of Ceramic Substrates for Thick Film
Applications
Electrodeposited Coatings on Threaded Components
[Metric]
Standard Specification for Crosslinked Polyethylene
(PEX) Tubing
Seal Strength of Flexible Barrier Materials
Standard Specification for Stainless Steel Socket-Set
Screws
Filter Units, Air Conditioning: Viscous-Impingement
Type, Cleanable
Incinerating Oil Spill Wastes at Temporary Field
Locations
Temperature Measurement and Profiling for Microwave
Susceptors
Evaluation of Large Area Density and Background on
Office Copiers
Standard Specification for Crosslinked Polyethylene
(PEX) Plastic Hot- and Cold-Water Distribution
Systems
Polybutylene (PB) Thermoplastic Thin-Wall Drip
Irrigation Tubing
Stainless Steel Socket Button and Flat Countersunk
Head Cap Screws
F 879M
F 882
F 884
F 885
F 894
F 909
F 887
F 891
F 888
F 892
F 893
F 895
F 896
F 897
F 899
F 914
F 919
F 97
F 90
F 900
F 901
F 902
F 903
F 904
F 905
F 906
F 91
Stainless Steel Socket Button and Flat Countersunk
Head Cap Screws [Metric]
Cryosurgical Medical Implants
Motor Life Evaluation of a Built-In (Central Vacuum)
Vacuum Cleaner
Envelope Dimensions for Bronze Globe Valves NPS 1/4
to 2
Polyethylene (PE) Large Diameter Profile Wall Sewer
and Drain Pipe
Standard Terminology Relating to Printers
Personal Climbing Equipment
Specification for Coextruded Poly(Vinyl Chloride)
(PVC) Plastic Pipe With a Cellular Core
Measuring Maximum Function Volume of the Primary
Dirt Receptacle in a Vacuum Cleaner
Polyethylene (PE) Corrugated Pipe With a Smooth
Interior and Fittings
Inspection of Amusement Rides and Devices
Agar Diffusion Cell Culture Screening for Cytotoxicity
Fexibile Fiberoptic Bronchoscopes
Measuring Fretting Corrosion of Osteosynthesis Plates
and Screws
Stainless Steel Billet Bar, and Wire for Surgical
Instruments
Acoustic Emmission for Insulated Aerial Personnel
Devices
Standard Specification for Slicing Machines, Food,
Electric
Determining Hermeticity of Electron Devices by Dye
Penetration
Wrought Cobalt-Chromium-Tungsten-Nickel Alloy for
Surgical Implant Applications
Industrial and Commercial Swing Gates
Aluminum Transmission Tower Bolts and Nuts
Calculating the Average Circular-Capillary-Equivalent
Pore Diameter in Filter Media from Measurements of
Porosity and Permeability
Resistance of Protective Clothing Materials to
Penetration by Liquids
Comparison of Bond Strength of Ply Adhesion of
Similar Laminates Made from Flexible Materials
Qualification of Polyethylene Saddle Fusion Joints
Letters and Numerals for Ships
Testing for Leaks in the Filters Associated With
Laminar Flow Clean Rooms and Clean Work Stations
F 910
F 912
F 912M
F 911
F 913
F 916
F 917
F 918
F 92
F 920
F 921
F 922
F 925
F 939
F 952
F 923
F 924
F 926
F 928
F 929
F 930
F 931
F 932
F 935
F 940
F 944
by Use of a Condensation Nuclei Detector
Standard Specification for Face Guards for Youth
Baseball
Specification for Alloy Steel Socket Set Screws
Specification for Alloy Steel Socket Set Screws [Metric]
Flexibility of Running Shoes
Thermoplastic Elastomeric Seals (Gaskets) for Joining
Plastic Pipe
Elevators, Shipboard, Electromechanical Passenger, and
Stores
Commercial Food Waste Disposers
Noncarbonated Mechanically Refrigerated Beverage
Dispenser (Visible Products)
Determination of Character Yield of Inked Fabric
Typewriter and Printer Ribbons
Minimum Performance and Safety Requirements for
Resuscitators Intended for Use with Humans
Terms Relating to Hemostatic Forceps
Motor Life Evaluation of a Household Electric
Motorized Nozzle
Resistance to Chemicals of Resilient Flooring
Practice for Selection of Release Torque Values for
Alpine Ski Bindings
Specification for Mixing Machines, Food, Electric
Standard Guide to Properties of High Visibility
Materials Used to Improve Individual Safety
Resistance to Puncture of Cushioned Resilient Floor
Coverings
CAUTIONARY LABELING OF PORTABLE
KEROSINE CONTAINERS FOR CONSUMER USE
Edge Contour of Circular Semiconductor Wafers and
Rigid Disk Substrates
Ecological Consideration for the Use of Chemical
Dispersants in Oil Spill Response-Marine Mammals
Ecological Considerations for the Use of Chemical
Dispersants in Oil Spill Response-Rocky Shores
Ecological Considerations for the Use of Chemical
Dispersants in Oil Spill Response-Seagrasses
Ecological Considerations for the Use of Chemical
Dispersants in Oil Spill Response-Coral Reefs
Comparing Cover-up Correction Media
Practice for Quality Control Receipt Inspection
Procedures for Protective Coatings (Paint), Used in
Marine Construction and Shipbuilding
Boot Sole Dimensions of Adult Alpine Ski Boots
F 933
F 934
F 941
F 942
F 945
F 946
F 947
F 948
F 949
F 95
F 950
F 951
F 953
F 955
F 956
F 957
F 960
F 969
F 962
F 963
F 966
F 959
F 959M
Evaluation of Oil Water Separation System for Spilled
Oil Recovery Applications
Standard Colors for Polymer-Coated Chain Link Fence
Materials
Inspection of Marine Surface Preparation and Coating
Application
Selection of Test Methods for Interlayer Materials for
Aerospace Transparent Enclosures
Stress-Corrosion of Tatanium Alloys by Aircraft Engine
Cleaning Materials
Establishing Security Seal Control and Accountability
Procedures
Determining Low-Level X-Radiation Sensitivity of
Photographic Films
Time-to-Failure of Plastic Piping Systems and
Components Under Constant Internal Pressure With
Flow
Standard Specification for Poly(Vinyl Chloride) (PVC)
Corrugated Sewer Pipe With a Smooth Interior and
Fittings
Standard Test Method for Thickness of Lightly Doped
Silicon Epitaxial Layers on Heavily Doped Silicon
Substrates Using an Infrar
Measuring the Depth of Crystal Damage of a
Mechanically Worked Silicon Slice Surface by Angle
Polishing and Defect Etching
Determination of Radial Interstitial Oxygen Variation In
Silicon Wafers
Commercial Dishwashing Machines (Stationary Racks,
Dump Type) Chemical Sanitizing
Evaluating Heat Transfer through Materials for
Protective Clothing Upon Contact with Molten
Substances
Bell, Cast, Sound Signalling
Gong, Sound Signaling
Specification for Medical and Surgical Suction and
Drainage Systems
Standard Practice for Construction of Chain-Link Tennis
Court Fence
Oil Spill Response Boom Connection
Consumer Safety Specification on Toy Safety
Consumer Safety Specification for Full-Size and NonFull-Size Baby Crib Corner Post Extensions
Compressible-Washer-Type Direct Tension Indicators
for Use with Structural Fasteners
Compressible-Washer-Type Direct Tension Indicators
F 96
F 961
F 964
F 965
F 967
F 968
F 971
F 972
F 973
F 974
F 975
F 976
F 977
G1
G 115
G 119
F 983
F 985
G 17
G 18
F 986
F 978
F 979
F 980
F 980M
for Use With Structural Fasteners [Metric]
Electronic Grade Alloys of Copper and Nickel in
Wrought Forms
Cobalt-35 Nickel-20 Chromium-10 Molybdenum Alloy
Forgings for Surgical Implants [UNS R30035]
Rigid Poly(Vinyl Chloride) (PVC) Exterior Profiles
Used for Fencing
Rigid Laryngoscopes for Tracheal Intubation--Hook-on
Fittings for Laryngoscope Handles and Blades with
Lamps
Security Engineering Symbols
Electrically Insulating Plastic Guard Equipment for
Protection of Workers
Ecological Considerations for the Use of Chemical
Dispersants in Oil Spill Response : Mangroves
Ecological Consideration for the Use of Chemical
Dispersants in Oil Spill Response - Nearshore Subtidal
Ecological Consideration for the Use of Chemical
Dispersants in Oil Spill Response : Tidal Flats
Determination of the Color Response of and
Electrostatic Copying System, Black and White Output
Auxiliary Single Stage Steam Turbines for Shipboard
Use
Portable Kerosine Containers for Consumer Use
Consumer Safety Specification for Infant Walkers
Preparing, Cleaning, and Evaluating Corrosion Test
Specimens
Measuring and Reporting Friction Coefficients
Determining Synergism Between Wear and Corrosion
Standard Practice for Permanent Marking of
Orthopaedic Implant Components
Panama Canal Pilot Platform
Penetration Resistance of Pipeline Coatings (Blunt Rod)
Joints, Fittings, and Patches in Coated Pipelines
Suction Strainer Boxes
Characterizing Semiconductor Deep Levels by Transient
Capacitance Techniques
Hermeticity of Hybrid Microcircuit Packages Prior to
Lidding
Measurement of Rapid Annealing of Neutron-Induced
Displacement Damage in Silicon Semiconductor
Devices
Measurement of Rapid Annealing of Neutron-Induced
Displacement Damage in Silicon Semiconductor
Devices [Metric]
F 981
F 982
F 984
F 987
F 99
F 990
F 991
F 991M
F 992
F 993
F 994
PS 110
A 1002
D 6393
F 997
F 998
G 10
F 995
F 996
F 999
G 100
G 101
G 102
G 103
G 104
Assessment of Compatibility of Biomaterials
(Nonporous) for Surgical Implants with Respect to
Effect of Materials on Muscle and Bone
Disclosure of Characteristics of Surgically Implanted
Clamps for Carotid Occlusion
Cutaneous Gas Monitoring Devices for Oxygen and
Carbon Dioxide
Portable Intermediate Flush Deck Stanchion
Preparation of Flexible Barrier Material Specifications
Ecological Considerations for the Use of Chemical
Dispersants in Oil Spill Response - Sandy Beaches
Docking/Drain Plug and Boss Assemblies
Docking/Drain Plug and Boss Assemblies
Valve Label Plates
Valve Locking Devices
Design and Installtion of Overboard Discharge Hull
Penetration Connections
Specification for Chests, Door Chests, and Dressers
Specification for Castings, Nickel-Aluminum Ordered
Alloy
Standard Test Method for Bulk Solids Characterization
by Carr Indices
Standard Specification for Polycarbonate Resin for
Medical Applications
Centrifugal Pump, Shipboard Use
Specific Bendability of Pipeline Coatings
Estimating Toner Usage in Copiers Utilizing Dry TwoComponents Developer
Seperating an Ionizing Radiation Induced MOSFET
Threshold Voltage Shift into Components Due to Exide
Trapped Holes and Interface States Using the
Subthreshold Current-Voltage Characteristics
Ecological Consideration for the Use of Chemical
Dispersants in Oil Spill Response - Gravel or Cobble
Beaches
Conducting Cyclic Galvanostaircase Polarization
Standard Guide for Estimating the Atmospheric
Corrosion Resistance of Low-Alloy Steels
Calculation of Corrosion Rates and Related Information
from Electrochemical Measurements
Evaluating Stress-Corrosion Cracking of Low Copper
7XXX Series Al-Zn-Mg Alloys in Boiling 6% Sodium
Chloride Solution
Assessing Galvanic Corrosion Caused by the
Atmosphere
G 105
G 106
G 107
G 108
G 109
G 11
G 110
G 111
G 112
G 114
G 117
G 118
G 113
G 116
G 12
G 120
G 121
G 122
G 145
G 149
G 123
G 124
G 125
Conducting Wet Sand Rubber/ Wheel Abrasion Tests
Verification of Algorithm and Equipment for
Electrochemical Imedance Measurements
Formats for Collection and Compilation of Corrosion
Date for Metals for Computerized Database Input
Electrochemical Reactivation (EPR) for Detecting
Sensitization of AISI Type 304 and 304L Stainless
Steels
Determining the Effects of Chemical Admixtures on the
Corrosion of Embedded Steel Reinforcement in
Concrete Exposed to Chloride Environments
Effects of Outdoor Weathering on Pipeline Coatings
Evaluating Intergranular Corrosion Resistance of HeatTreatment Aluminium Alloys by Immersion in Sodium
Chloride + Hydrogen Peroxide Solution
Corrosion Tests in High Temperature or High Pressure
Environment, or Both
Conducting Exfoliation Corrosioin Tests in Aluminium
Alloys
Aging Oxygen-Service Materials Prior to Ignitibility or
Flammability Testing
Calculating and Reporting Measures of Precision Using
Data From Interlaboratory Wear or Erosion Tests
Recommended Format of Wear Test Data Suitable for
Databases
Natural and Artificial Weathering Test of Nonmetallic
Materials
Conducting Wire-on-Bolt Test for Atmospheric
Galvanic Corrosion
Nondestructive Measurement of Film Thickness of
Pipeline Coatings on Steel
Standard Practice for Determination of Soluble Residual
Contamination in Materials and Components by Soxhlet
Extraction
Preparation of Contaminated Test Coupons for the
Evaluation of Cleaning Agents
Evaluating the Effectiveness of Cleaning Agents
Studying Fire Incidents in Oxygen Systems
Conducting the Washer Test for Atmospheric Galvanic
Corrosion
Standard Test Method for Evaluating Stress-Corrosion
Cracking of Stainless Alloys with Different Nickel
Content in Boiling Acidified Sodium Chloride Solution
Determining the Combustion Behavior of Metallic
Materials in Oxygen-Enriched Atmospheres
Standard Test Method for Measuring Liquid and Solid
G 126
G 127
G 128
G 129
G 13
G 130
G 131
G 132
G 133
G 134
G 135
G 142
G 143
G 136
G 137
G 138
G 139
G 14
G 140
G 141
G 144
G 146
Material Fire Limits in Gaseous Oxidants
Standard Terminology Relating to the Compatibility and
Sensitivity of Materials in Oxygen Enriched
Atmospheres
Standard Guide for the Selection of Cleaning Agents for
Oxygen Systems
Control of Hazards and Risks in Oxygen Systems
Standard Practice for Slow Strain Rate Testing to
Evaluate the Susceptibility of Metallic Materials to
Environmentally Assisted Cracking
Impact Resistance of Pipeline Coatings (Limestone
Drop Test)
Calibration of Narrow and Broad Band Ultraviolet
Radiometers Using a Spectroradiometer
Cleaning of Materials and Components by Ultrasonic
Techniques
Pin Abrasion Testing
Linearly Reciprocating Ball-0n-Flat Sliding Wear
Standard Test Method for Erosion of Solid Materials by
a Cavitating Liquid Jet
Standard Guide for Computerized Exchange of
Corrosion Data for Metals
Determination of Susceptibility of Metals to
Embrittlement in Hydrogen Containing Environments at
High Pressure, High Temperature, or Both
Measurement of Web/Roller Friction Characterstics
Determination of Soluble Residual Contaminants in
Materials by Ultrasonic Extraction
Ranking Resistance of Plastic Materials to Sliding Wear
Using a Block-on-Ring Configuration
Calibration of a Spectroradiometer Using a Standard
Source of Irradiance
Determining Stress Corrosion Cracking Resistance of
Heat-Treatable Aluminum Alloy Products Using
Breaking Load Method
Impact Resistance of Pipeline Coatings (Falling Weight
Test)
Determining Atmospheric Chloride Deposition Rate by
Wet Candle Method
Addressing Variability in Exposure Testing on
Nonmetallic Materials
Determination of Residual Contamination of Materials
and Components by Total Carbon Analysis Using a
High-Temperature Combustion Analyzer
Evaluation of Disbonding of Bimetallic Stainless
Alloy/Steel Plate for Use in High-Pressure, High-
G 147
G 148
G 15
G 158
G 161
G 162
G 150
G 151
G 152
G 153
G 154
G 155
G 156
G 157
G 159
G 16
G 160
G 19
G 22
G 32
G 39
G 40
G2
Temperature Refinery Hydrogen Service
Practice for Conditioning and Handling of Nonmetallic
Materials for Natural and Artificial Weathering Tests
Evaluation of Hydrogen Uptake, Permeation, and
Transport in Metals by an Electrochemical Technique
Corrosion and Corrosion Testing
Standard Guide for Three Methods of Assessing Buried
Steel Tanks
Guide for Corrosion-Related Failure Analysis
Conducting and Evaluating Laboratory Corrosions Tests
in Soils
Electrochemical Critical Pitting Temperature Testing of
Stainless Steels
Standard Practice for Exposing Nonmetallic Materials in
Accelerated Test Devices that Use Laboratory Light
Sources
Standard Practice for Operating Open Flame Carbon Arc
Light Apparatus for Exposure of Nonmetallic Materials
Standard Practice for Operating Enclosed Carbon Arc
Light Apparatus for Exposure of Nonmetallic Materials
Standard Practice for Operating Fluorescent Light
Apparatus for UV Exposure of Nonmetallic Materials
Standard Practice for Operating Xenon Arc Light
Apparatus for Exposure of Non-Metallic Materials
Selecting and Characterizing Weathering Reference
Materials Used to Monitor Consistency of Conditions in
an Exposure Test
Guide for Evaluating the Corrosion Properties of
Wrought Iron- and Nickel-Based Corrosion Resistant
Alloys for the Chemical Process Industries
References Solar Spectral Irradiance at Air Mass 1.5 :
Direct Normal and Hemispherical for a 37° Tilted
Surface
Standard Guide for Applying Statistics to Analysis of
Corrosion Data
Evaluating Microbial Susceptibility of Nonmetallic
Materials By Laboratory Soil Burial
Disbonding Characteristics of Pipeline Coatings by
Direct Soil Burial
Determining Resistance of Plastics to Bacteria
Cavitation Erosion Using Vibratory Apparatus
Preparation and Use of Bent-Beam Stress-Corrosion
Test Specimens
Terminology Relating to Wear and Erosion
Corrosion Testing of Products of Ziroconium, Hafnium,
and and Their Alloys in Water at 680°F or in Steam at
G 20
G 21
G 23
G 24
G 26
G 28
G 29
G 46
G 51
G 52
G 62
G 2M
G 30
G 31
G 35
G 36
G3
G 33
G 34
G 37
G 38
G4
750°F
Chemical Resistance of Pipeline Coatings
Determining Resistance of Synthetic Polymeric
Materials to Fungi
Operating Light-Exposure Apparatus (Carbon-Arc
Type) With and Without Water for Exposure of
Nonmetallic Materials
Conducting Exposures to Daylight Filtered Through
Glass
Operating Light-Exposure Apparatus (Xenon-Arc Type)
With and Without for Exposure of Nonmetallic
Materials
Detecting Susceptibility to Intergranular Attack in
Wrought, Nickel-Rich, Chromium-Bearing Alloys
Determining Algal Resistance of Plastic Films
Examination and Evaluation of Pitting Corrosion
Test Method for Measuring pH of Soil for Use in
Corrosion Testing
Practice for Exposing and Evaluating Metals and Alloys
in Surface Seawater
Holiday Detection in Pipeline Coatings
Corrosion Testing of Products of Zirconium, Hafnium,
and Their Alloys in Water at 633°K or in Steam at
673°K {Metric}
Making and Using U-Bend Stress-Corrosion Test
Specimens
Laboratory Immersion Corrosion Testing of Metals
Determining the Susceptibility of Stainless Steels and
Related Nickle-Chromium-Iron Alloys to StressCorrosion Cracking in Polythionic Acids
Practice for Evaluating Stress-Corrosion-Cracking
Resistance of Metals and Alloys in a Boiling
Magnesium Chloride Solution
Convertions Appliable to Electochemical Measurements
in Corrosion Testing
Recording Data from Atmospheric Corrosion Tests of
Metalic Coated Steel Specimens
Exfoliation Corrosion Susceptibility in 2XXX and
7XXX Series Aluminium Alloys (EXCO Test)
Use of Mattsson's Solution of pH 7.2 to Evaluate the
Stress-Corrosion Cracking Susceptibility of CopperZinc Alloys
Standard Practice for Making and Using C-Ring StressCorrosion Test Specimens
Conducting Corrosion Coupon Tests in Field
Applications
G 41
G 42
G 44
G 47
G 48
G 49
G5
G 50
G 53
G 55
G6
G 54
G 56
G 57
G 60
G 61
G 63
G 58
G 59
G 64
G 65
G 70
G 73
G 85
G 87
G 66
Practice for Determining Cracking Susceptibility of
Metals Exposed Under Stress to a Hot Salt Environment
Cathodic Disbonding of Pipeline Coatings Subjected to
Elevated Temperatures
Practice for Exposure of Metals and Alloys by Alternate
Immersion in Neutral 3.5 % Sodium Chloride Solution
Determining Susceptibility to Stress-Corrosion Cracking
of 2XXX and 7XXX Aluminium Alloy Products
Standard Test Methods for Pitting and Crevice
Corrosion Resistance of Stainless Steels and Related
Alloys by Use of Ferric Chloride Solution
Practice for Preparation and Use of Direct Tension
Stress-Corrosion Test Specimens
Making Potentiostaticv and Potentiodynamic Anodic
Polarization Measurements
Conducting Atmospheric Corrosion Tests on Metals
Operating Light- and Water-Exposure Apparatus
(Fluorescent UV-Condensation Type) for Exposure of
Nonmetallic Materials
Evaluating Pipeline Coating Patch Materials
Abrasion Resistance of Pipeline Coatings
Simple Static Oxidation Testing
Test Method for Abrasiveness of Ink-Impregnated
Fabric Printer Ribbons
Standard Test Method for Field Measurement of Soil
Resistivity Using the Wenner Four-Electrode Method
Conducting Cyclic Humidity Tests
Conducting Cyclic Potentiodynamic Polarization
Measurements for Localized Corrosion Susceptibility of
Iron-, Nickel-, or Cobalt-Based Alloys
Evaluating Nonmetallic Materials for Oxygen Service
Preparation of Stress-Corosion Test Specimens for
Weldments
Conducting Potentiodynamic Polarization Resistance
Measurements
Classification of Resistance to Stress-Corrosion
Cracking of Heat-Treatable Aluminium Alloys
Standard Test Method for Measuring Abrasion Using
the Dry Sand/Rubber Wheel Apparatus
Ring Bendability of Pipeline Coatings (Squeeze Test)
Liquid Impingement Erosion Testing
Modified Salt Spray (Fog) Testing
Conducting Moist SO2 Tests
Visual Assessment of Exfoliation Corrosion
Susceptibility of 5 XXX Series Aluminium Alloys
G 67
G 69
G7
G 71
G 72
G 74
G 75
G9
G 94
PS 102
PS 104
G 76
G 77
G 78
G8
G 81
G 79
G 80
G 82
G 83
G 84
G 86
G 88
G 90
(ASSET Test)
Determining the Susceptibility to Intergranular
Corrosion of 5XXX Series Aluminium Alloys by Mass
Loss After Exposure to Nitric Acid (NAMLT Test)
Measurement of Corrosion Potentials of Aluminium
Alloys
Atmospheric Environmental Exposure Testing of
Nonmetallic Materials
Conducting and Evaluating Galvanic Corrosion Tests in
Electrolytes
Autogenous Ignition Temperature of Liquids and Solids
in a High-Pressure Osygen-Enriched Environment
Ignition Sensitivity of Materials to Gaseous Fluid
Impact
Determination of Slurry Abrasivity (Miller Number) and
Slurry Abrasion Response of Materials (SAR Number)
Water Penetration into Pipeline Coatings
Evaluating Metals for Ooxygen Service
Inetrnet and Intranet Healthcare Security
Provisional Guide for Risk-Based Corrective Action
Standard Test Method for Conducting Erosion Tests by
Solid Particle Impingement Using Gas Jets
Ranking Resistance of Materials to Sliding Wear Using
Block-on-Ring Wear Test
Standard Guide for Crevice Corrosion Testing of IronBase and Nickel-Base Stainless Alloys in Seawater and
Other Chloride-Containing Aqueous Environments
Cathodic Disbonding of Pipeline Coatings
Jaw Crusher Gouging Abrasion Test
Evaluation of Metals Exposed to Carburization
Environments
Specific Cathodic Disbonding of Pipeline Coatings
Development and Use of a Galvanic Series for
Predicting Galvanic Corrosion Performance
Wear Testing with a Crossed-Cylinder Apparatus
Measurement of Time-of-Wetness on Surfaces Exposed
to Wetting Conditons as in Atmospheric Corrosion
Testing
Determining Ignition Sensitivity of Materials to
Mechanical Impact in Ambient Liquid Oxygen and
Pressurized Liquid and Gaseous Oxygen Environments
Designing Systems for Ooxgen Service
Performing Accelerated Outdoor Weathering of
Nonmetallic Materials Using Concentrated Natural
Sunlight
G 91
G 92
G 93
G 95
G 96
G 97
G 99
PS 100
PS 101
G 98
PS 111
PS 112
PS 28
PS 47
PS 48
PS 52
A 1003/A 1003M
PS 57
PS 58
PS 78
PS 79
PS 80
PS 62
Monitoring Atmospheric SO2 Uusing the Sulfation Plate
Technique
Characterization of Atmospheric Test Sites
Cleaning Methods and Cleanliness Levels for Material
and Equipment Used in Oxygen-Enriched Environments
Cathodic Disbondment Test of Pipeline Coatings
(Attached Cell Method)
On-Line Monitoring of Corrosion in Plant Equipment
(Electrical and Electrochemical Methods)
Laboratory Evaluation of Magnesium Sacrificial Anode
Test Specimens for Underground Applications
Test Method for Wear Testing with a Pin-on-Disk
Apparatus
Healthcare Information Using Digital Signatures
Guide on Security Framework for Healthcare
Information
Galling Resistance of Materials
Dedicated Short Range Communication (DSRC)
Physical Layer Using Microwave in the 902 to 928 MHz
Band
Window Fall Prevention Devices for Non-Emergency
Escape (Egress) and Rescue (Ingress) Windows
Flow Consistency of Controlled Low Strength Material
Screening, Quantification, and Characterization of Total
Polychloinated Biphenyls by Room Temperature
Phosphorescence
Oil and Grease (Solvent Extractable Substances) by
Gravimetric Determination
Determination of Trace Elements in Coal, Coke and
Combustion Residues From Coal Utilization Processes
by Inductively Coupled Plasma Atomic Emission
Spectrometry, Inductively Coupled Plasma Mass
Spectrometry, and Graphite Furnace
Specification for Steel Sheet, Carbon, Metallic- and
Nonmetallic-Coated for Cold-Formed Framing
Members
Test Method for Determining Ignitability of Clothing by
Electric Arc Exposure Method Using a Mannequin
Test Method for Determining Arc Thermal Performance
[Value] of Textile Materials for Clothing by Electric Arc
Exposure Method Using Instrumented Sensor Penels
Guide for Selecting Surface Geophysical Methods
Holding Strength of Prong-Ring Attached Snap
Fasteners
Safety and Performance of Fun-Karts
Specification for Precast Reinforced Concrete Box
PS 70
A 1004/A 1004M
PS 72
PS 74
PS 81
PS 93
PS 94
PS 95
PS 96
B 230/B 230M
B 231/B 231M
B 898
C 1401
D 6372
D 6373
B 232/B 232M
B 398/B 398M
B 399/B 399M
B 609/B 609M
B 896
Sections for Culverts, Strom Drains, and Sewers
Determination of Fracture Toughness of Advanced
Ceramics at Ambinent Temperatures
Practice for Establishing Conformance to the Minimum
Expected Corrosion Characteristics of Metallic, PaintedMetallic, and Nonmetallic-Coated Steel Sheet Intended
for Use as Cold Formed Framing Members
Evaluating the Tensile-Adhesion Performance of an
Exterior Insulation and Finish System (EIFS)
Oil and Grease (Solvent Extractable Substances) in
Water by Gravimetric Determination
Length Change of Mortar Bars Caused by Reaction
Between Hydraulic Cement and Alkali-Reactive
Aggregate
Specification for Fabricated Shapes and Finished Parts
Fabricated From Polyimide Resins
Personal Sampling and Analysis of Endotoxin in Metal
Removal Fluid Aerosols in Workplace Atmospheres
Quality Systems for Conduction in Situ Measurements
of Lead Content in Paint or Other Coatings Using FieldLead Ccontent in Paint or Other Coatings Using FieldPortable X-Ray Fluorescence (XRF) Devices
Plastic Chaise Lounges, With or Without Moving Arms,
With Adjustable Backs, for Outdoor Use
Standard Specification for Aluminum 1350-H19 Wire
for Electrical Purposes
Standard Specification for Concentric-Lay-Stranded
Aluminum 1350 Conductors
Standard Specification for Reactive and Refractory
Metal Clad Plate
Standard Guide for Structural Sealant Glazing
Standard Practice for Design, Testing, and Construction
of Micro-Surfacing
Standard Specification for Performance Graded Asphalt
Binder
Standard Specification for Concentric-Lay-Stranded
Aluminum Conductors, Coated-Steel Reinforced
(ACSR)
Standard Specification for Aluminum-Alloy 6201-T81
Wire for Electrical Purposes
Standard Specification for Concentric-Lay-Stranded
Aluminum-Alloy 6201-T81 Conductors
Standard Specification for Aluminum 1350 Round Wire,
Annealed and Intermediate Tempers, for Electrical
Purposes
Standard Test Methods for Evaluating Connectability
C 1427
D 6381
D 6387
D 6395
D 6399
D 6416
D 6418
D 6419
D 6440
D 6451
E 1065
E 2010
D 6420
D 6421
D 6422
D 6423
D 6424
D 6425
E 1995
Characteristics of Electrical Conductor Materials
Specification for Preformed Flexible Cellular Polyolefin
Thermal Insulation in Sheet and Tubular Form
Standard Test Method for Measurement of Asphalt
Shingle Tab Mechanical Uplift Resistance
Standard Test Methods for Composition of Turpentine
and Related Terpene Products by Capillary Gas
Chromatography
Standard Test Method for Flatwise Flexural Impact
Resistance of Rigid Plastics
Standard Guide for Selecting Instruments and Methods
for Measuring Air Quality In Aircraft Cabins
Standard Test Method for Two-Dimensional Flexural
Properties of Simply Supported Sandwich Composite
Plates Subjected to a Distributed Load
Standard Practice for Using the Disposable En Core
Sample for Sampling and Storing Soil for Volatile
Organic Analysis
Test Method for Volatile Content of Sheet-Fed and
Coldset Web Offset Printing Inks
Terminology Relating to Hydrocarbon Resins
Standard Guide for Application of Asphalt Based
Protection Board
Standard Guide for Evaluating Characteristics of
Ultrasonic Search Units
Standard Test Method for Positive Pressure Fire Tests of
Window Assemblies
Standard Test Method for Determination of Gaseous
Organic Compounds by Direct InterFace Gas
Chromatography-Mass Spectrometry
Test Method for Evaluating Automotive Spark-Ignition
Engine Fuel for Electronic Port Fuel Injector Fouling by
Bench Procedure
Standard Test Method for Water Tolerance (Phase
Separation) of Gasoline-Alcohol Blends
Standard Test Method for Determination of pH of
Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol
(Ed75-Ed85)
Standard Practice for Octane Rating Naturally Aspirated
Spark Ignition Aircraft Engines
Standard Test Method for Measuring Friction and Wear
Properties of Extreme Pressure (EP) Lubricating Oils
Using SRV Test Machine
Standard Test Method for Measurement of Smoke
Obscuration Using a Conical Radiant Source in a Single
Closed Chamber, With the Test Specimen Oriented
E 2013
E 2014
E 2015
E 2018
E 2023
E 2024
E 1963
E 2008
F 1965
E 2028
E 2022
D 6415
D 6417
F 1872
F 1939
F 1960
F 1967
F 1970
F 1971
F 1973
Horizontally
Standard Practice for Constructing FAST Diagrams and
Performing Function Analysis During Value Analysis
Study
Standard Guide on Metallographic Laboratory Safety
Standard Guide for Preparation of Plastics and
Polymeric Specimens for Microstructural Examination
Standard Guide for Property Condition Assessments:
Baseline Property Condition Assessment Process
Standard Practice for Fabrication of Neutron
Radiographic Sensitivity Indicators
Standard Test Methods for Atmospheric Leaks Using a
Thermal Conductivity Leak Detector
Standard Guide for Conducting Terrestrial Plant
Toxicity Tests
Standard Test Method for Volatility Rate by
Thermogravimetry
Standard Test Method for Performance of Deck Ovens
Standard Practice for Receiving, Testing and Reporting
Results of Investigation of Metal, Ore, or Metal Related
Samples that Are or May Be Involved in Litigation
Standard Practice for Calculation of Weighting Factors
for Tristimulus Integration
Standard Test Method for Measuring the Curved Beam
Strength of a Fiber-Reinforced Polymer-Matrix
Composite
Standard Test Method for Estimation of Engine Oil
Volatility by Capillary Gas Chromatography
Standard Guide for Use of Chemical Shoreline Cleaning
Agents: Environmental and Operational Considerations
Standard Test Method for Radiant Protective
Performance of Flame Resistant Clothing Materials
Standard Specification for Cold Expansion Fittings with
PEX Reinforcing Rings for Use with Cross-linked
Polyethylene (PEX) Tubing
Standard Consumer Safety Specification for Infant Bath
Seats
Standard Specification for Special Engineered Fittings
or Appurtenances for use in Poly (Vinyl Chloride)
(PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC)
Systems
Standard Test Method for Electrical Resistance of Tires
Under Load On the Test Bench
Standard Specification for Factory Assembled
Anodeless Risers and Transition Fittings in Polyethylene
(PE) Fuel Gas Distribution Systems
F 1974
F 1975
PS 114
PS 75
PS 115
PS 117
D 6384
E 1977
A 220/A200M
A 47/A47M
A 503/A 503M
A 683/A 683M
B 895
B 897
B 96/B 96M
C 1422
C 1425
C 1426
C 1431
C 1437
C 1439
C 588/C 588M
D 6403
Standard Specification for Metal Insert Fittings for
Polyethylene/Aluminum/Polyethylene and Crosslinked
Polyethylene/Aluminum/Crosslinked Polye
Specification for Nonpowered Bicycle Trailers Designed
for Human Passengers
Provisional Standard Specification for Fire Suppression
Towels
Provisional Standard Safety and Performance
Specification for Soccer Goals
Provisional Standard Specification for Audit and
Disclosure Logs for Use in Health Information Systems
Provisional Standard Specification for Portable Escape
Ladder for Residential Use
Terminology Relating to Biodegradability and
Ecotoxicity of Lubricants
Standard Specification for Shelter, Tactical, Expandable,
One-Side
Specification for Pearlitic Malleable Iron
Specification for Ferritic Malleable Iron Casting
Standard Specification for Ultrasonic Examination of
Forged Crankshafts
Specification for Nonoriented Electrical Steel
Semiprocessed Type
Test Method for Evaluating the Corrosion Resistance of
Powder Metallurgy (P/M) Stainless Steel
Parts/Specimens by Immersion in a Soldium Chloride
Solution
Standard Specification for the Configuration of Zinc and
Zinc Alloy Jumbo Ingot
Specification for Copper-silicon Alloy Plate, Sheet,
Strip, and Rolled Bar for Generl Purposes and Pressure
Vessels
Specification for Chemically Strengthened Flat Glass
Test Method for Interlaminar Shear Strength of 1-D and
2-D Continuous Fiber-Reinforced Advanced Ceramics
at Elevated Temperatures
Practices for Verification and Calibration of
Polarmieters
Guide for Corrosion Testing of Aluminum-Based Spent
Nuclear Fuel in Support of Repository Disposal
Test Method for Flow of Hydraulic Cement Mortar
Test Methods for Polymer-Modified Mortar and
Concrete
Specification for Gysum Base for Veneer Plasters
Test Method for Determining Moisture in Raw and
Spent Materials
C 1435
C 1432
C 1438
C 157/C 157M
C 230/C 230M
C 39/C 39M
C 442/C 442M
D 2885
D 5082
D 6357
D 6401
D 6402
D 6405
D 6406
D 6407
D 6408
D 6409
D 6427
D 6428
D 6435
D 6439
D 6441
Practice for Molding Roller-Compacted Concrete in
Cylinder Molds Using a Vibrating Hammer
Test Method for Determination of Impurities in
Plutonium: Acid Dissolution, Ion Exchange Matric
Separation, and Inductively Coupled Plasma-Atomic
Emission Spectroscopic (ICP/AES) Analysis
Specification for Latex and Powder Polymer Modifiers
for Hydraulic Cement Concrete and Mortar
Test Method for Length of Hardened Hydraulic-Cement
Mortar and Concrete
Standard Specification for Flow Table for Use in Tests
of Hydraulic Cement
Standard Test Method for Compressive Strength of
Cylindrical Concrete Specimens
Specification for Gypsum Backing Board, Gypsum
Coreboard, and Gypsum Shaftliner Board
Test Method for Research and Motor Method Octane
Ratings Using On-Line Analyzers
Practice for Application of Mechnically Attached Poly
(Vinyl Chloride) Sheet Roofing
Standard Test Methods for Determination of Trace
Elements in Coal, Coke, and Combustion Residues from
Coal Utilization Processes by Inductively
Test Method for Determining Non-Tannins and Tannin
in Extracts of Vegetable Tanning Materials
Test Method for Determining Soluble Solids and
Insolubles in Extracts of Vegetable Tanning Materials
Practice for Extraction of Tannins from Raw and Spent
Materials
Test Method for Analysis of Sugar in Vegetable
Tanning Materials
Test Method for Analysis of iron and Copper in
Vegetable Tanning Materials
Test Method for Analysis of Tannery Liquors
Procatice for Color Tests with Sheepskin Skiver
Practice for Handling, Transporation, and Storage of
HFC-236fa, 1,1,1,3,3,3-Hexafluroropropane (CF3 CH2
CF3)2
Method for Total Sulfur in Liquid Aromatic
Hydrocarbons and Their Derivatives by Oxidative
Combustion and Electrochemical Detection
Method for Shear Properties of Plastic Lumber and
Plastic Lumber Shapes
Uide for Cleaning, Flushing, and Purification of Steam,
Gas, and Hydroelectric Turbine Lubrication Systems
Test Methods for Measuring the Hiding Power of
E 2011
E 2017
D 6412/D 6412M
B 301/B 301M
D 6454
B 899
D 6411/D 6411M
C 1064/C 1064M
C 1421
C 1424
C 1436
D 6413
D 6429
C 1428
C 1433
C1433M
C 1441
C 1442
C 1444
D 2970/D 2970M
Powder Coatings
Test Method for Evaluation of Handwashing
Formulations for Virus-Eliminating Activity Using the
Entire Hand
Guide for Amendments to health Information
Specification for Epoxy (Flexible) Adhesive for
Bonding Metallix and Nonmetallic Materials
Standard Specification for Free-Cutting Coipper rod,
Bar, Wire, and Shapes
Standard Test Method for Determining the Short-Term,
Compression Behavior of Turf Reinforcement Mats
(TRMs)
Standard Terminology Relating to Non-ferrous Metals
and Alloys
Standard Specification for Silicone Rubber Room
Temperature Vulcanizing Low Outgassing Materials
Standard Test Method for Temperature of Freshly
Mixed Portland Cement Concrete
Standard Test Methods for Determination of Fracture
Toughtness of Advanced Cermaics at Ambient
Temperature
Standard Test Methods for Monotonic Compressive
Strength of Advanced Ceramics at Ambient
Temperature
Standard Specification for Materials for Shotcrete
Standard Test Method for Flame Resistance of Textile
(Vertical Test)
Standard Guide for Selecting Surface Geophysical
Methods
Standard Test Method for lsotopic Analysis of Uranium
Hexafluoride by Single-Standard Gas Source Multiple
Collector Mass Spectrometer Method
Standard Specification for Precast Reinforced Concrete
Box Sections for Culverts, Storm Drains, and Sewers
Standard Specification for Precast Reinforced Concrete
Box Sections for Culverts, Storm Drains, and Sewers
[Metric]
Standard Test Method for The Analysis of Refrigerant
114, Plus Other Carbon-Containing and FluorineContaining Compounds in Uranium Hexafluoride Via
Fourier-Transform Infrared (FTIR) Spectroscopy
Standard Practice for Conducting Tests on Sealants
using Artificial Weathering Apparatus
Standard Test Method for Measuring the Angle of
Repose of Free-Flowing Mold Powders
Standard Test Methods for Testing Tire Cords, Tire
D 6369
D 6390
D 6391
D 6392
D 6430
D 6456
E 1992
E 2019
D 6431
D 6432
D 6434
D 6436
D 6437
D 6438
D 6443
D 6445
D 6446
D 6447
D 6448
Cord Fabrics, and Industrial Yarns Made From Glass
Filaments
Standard Guide for Design of Standard Flashing Details
for EPDM Roof Membrances
Standard Test Method for Determination of Draindown
Characteristics in Uncompacted Asphalt Mixtures
Standard Test Method for Field Measurement of
Hydraulic Conductivity Limits of Porous Materials
Using Two Stages of Infiltration from a Borehole
Standard Test Method for Determining the Integrityu of
Nonreinforced Geomembrane Seams Produced Using
Thermo-Fusion Methods
Standard Guide for Using the Gravity Method for
Subsurface Investigation
Standard Specification for Finished Parts Made from
Ployimide Resin
Terminology Relating to Terminology Management
Standard Test Method for Minimum Ignition Energy of
a Dust Cloud in Air
Standard Guide for Using the Direct Current Resistivity
Method for Subsurface Investigation
Standard Guide for Using the Surface Ground
Penetrating Radar Method for Subsurface Investigation
Standard Guide for the Selection of Test Methods for
Flexible Polypropylene (fPP) Geomembranes
Standard Guide for Reporting Properties for Plastics and
Thermoplastic Elastomers
Standard Test Method for Polyurethane Raw Materials:
Alkalinity in Low-Alkalinity Polyols (Determination of
CPR Values of Polyols)
Standard Test Method for Acetone, Methyl Acetate, and
Parachlorobenzotrifluoride Content of Paints, and
Coatings by Solid Phase Microextraction-Gas
Chromatography
Standard Test Method for Determination of Calcium,
Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and
Zinc in unused Lubricating Oils and Additives by
Wavelength Dispersive X-ray Fluorescence
Spectrometry (Methematical Correction Procedure)
Standard Test Method for Sulfur in Gasoline by EnergyDispersive X-ray Fluorescence Spectrometry
Standard Test Method for Estimation of Net Heat of
Combustion (Specific Energy) of Aviation Fuels
Standard Test Method for Hydroperoxide Number of
Aviation Turbine Fuels by Voltammetric Analysis
Standard Specification for Industrial Burner Fuels from
D 6449
A 48/A 48M
E 2026
E 2030
E 2032
D 6450
D 6452
D 6453
D 6455
D 6457
E 1996
E 2020
E 2025
E 2027
E 2031
E 2034
E 2035
E 2038
E 2040
F 1823
Used Lubricating Oils
Standard Test Method for Flow of Fine Aggregate
Concrete for Fabric Formed Concrete (Flow Cone
Method)
Standard Specification for Gray Iron Castings
Standard Guide for the Estimation of Building
Damageability in Earthquaks
Guide for Recommended Use of Photoluminescent
Safety Markings
Guide for Extension of Data From Fire Endurance Tests
Standard Test Method for Flash Point by Continuously
Closed Cup (CCCFP) Tester
Standard Guide for Purging Methods for Wells Used for
Ground-Water Quality Investigations
Standard Guide for Format of Computerized Exchange
of Soil and Rock Test Data
Standard Guide for the Selection of Test Methods for
Prefabricated Bituminous Geomembranes (PBGM)
Standard Specification for Extruded and Compression
Molded Rod and Heavy-Walled Tubing Made from
Polytetrafluoroethylene (PTFE)
Standard Specification for Performance of Exterior
Windows, Curtain Walls, Doors and Storm Shutters
Impacted by Windborne Debris in Hurricanes
Standard Guide for Data and Information Options for
Conducting an Ecological Risk Assessment at
Contaminated Sites
Standard Test Method for Evaluating Fenestration
Comonents and Assemblies for Resistance to Impact
Energies
Standard Practice for Conducting Proficiency Tests in
the Chemical Analysis of Metals, Ores, and Related
Materials
Standard Practice for Quality Control of
Psychophysiological Detection of Deception
(Polygraph) Examination
Standard Practice for Simulating Truck Response to
Longitudinal Profiles of Vehicular Traveled Surfaces
Standard Terminology Relating to Forensic
Psychophysiology
Standard Test Method for Temperature Calibration of
Dielectric Analyzers
Standard Test Method for Mass Scale Calibration of
Thermogravimetric Analyzers
Standard Guide for Water Rescue Personal Flotation
Device (PFD)
F 1824
F 1857
F 1870
F 1898
F 1917
F 1951
F 1956
F 1964
F 1972
F 1977
F 1978
F 1979
F 1980
F 1981
F 1982
F 1983
F 1984
F 1985
F 1989
E 1293
F 1988
Standard Guide for Peroformance of a Water RescuerLevel II
Standard Terminology Relating to Ink Jet Printers and
Images Made Therefrom
Standard Guide for Selection of Fire Test Methods for
the Assessment of Uphoistered Furnishings in Detention
and Correctional Facilities
Specification for Bicycle Helmets Used by Infants and
Toddlers
Standard Consumer Safety Performance Specification
for Infant Bedding and Related Accessories
Standard Specification for Dedtermination of
Accessibility of Surface Systems Under and Around
Playground Equipment
Standard Specification for Resue Carabiners
Standard Test Method for Performance of Pressure and
Kettle Fryers
Standard Guide for Terminology Relating ot Candles
and Associated Accessory Items
Standard Test Method for Determining Initial,
Fractional, Filtration Efficiency of a Vacuum Cleaner
System
Standard Test Method for Measuring Abrasion
Resistance of Metallic Thermal Spray Coatings by
Using the Taber &tm; Abraser
Standard Specification for Paintballs Used in the Sport
of Paintball
Guide for Accelerated Aging of Sterile Medical Device
Packages
Standard Specification for Suction Catheters for Use in
the Respiratory Tract
Standared Test Methods for Analyzing Organic
Contaminants on Silicon Water Surfaces by Thermal
Desorption Gas Chromatography
Standard Practice for Assessment of Compatibility of
Absorbable/Resorbable Biomaterials for Implant
Applications
Standard Practice for Testing for Whole Complement
Activation in Serum by Solid Materials
Standard Specification for Pneumatic-Operated, GlobeStyle, Control Valves
Standard Specification for Fire Suppression Towels
Standard Specification for Glass Measuring Pipets
Standard Performance Requirements for Plastic Chaise
Lounges, With or Without Moving Arms, With
Adustable Backs, for Outdoor Use
PS 116
PS 118
PS 121
D 522
D 638
A 395/A 395M
A 518/A 518M
B 900
C 1445
C 1447
C 1448
C 1450
C 1451
C 1452
C 1456
D 6473
D 6510
C 1457
C 1459
D 3710
D 6464
D 6467
Provisional Practice for the Performance Evaluation of
the Portable X-ray Fluorescene Spectrometer for the
Measrement of Lead in Paint Films
Provisional Standard Test Method for Water-Extrable
Chloride in Aggregate (Soxhiet Method)
Provisional Specification for Biodiesel Fuel (B100)
Blend Stock for Distillate Fuels
Standard Test Methods for Mandrel Bend Test of
Attached Organic Coatings
Standard Test Method for Tensile Properties of Plastics
Specification for Ferritic Ductile Iron PressureRetaining Castings for Use at Elevated Temperatures
Specification for Corrosion-Resistant High-Silicon Iron
Castings
Practice for Packaging of Copper and Copper-alloy
Mill-Products for U.S. Government Agencies
Test Method for Measuring Consistency of Castable
Refractory Using a Flow Table
Specification for Non-Asbestos Fiber-Cement
Underdrain Pipe
Specification for Non-Asbestos Fiber-Cement Conduit
Specification for Non-Asbestos Fiber-Cement Storm
Drain Pipe
Practice for Determining Uniformity of Ingredients of
Concrete From a Single Source
Specification for Reinforced Autoclaved Aerated
Concrete Elements
Test Method for the Determination of Uranium or
Gadolinium, or Both, in Gadolinium Oxide-Uranium
Oxide Pellets or by X-Ray Fluorescence (XRF)
Test Method For Specific Gravity And Absorption of
Rock For Erosion Control
Guide for Selection of Asphalt Used in Built-Up
Roofing Systems
Test Method for Determination of Total Hydrogen
Content of Uranium Oxide Powders and Pellets by
Carrier Gas Extraction
Specification for Performance of Non-Asbestos FiberReinforced Cement Shake, Shingle, and Slate Roofing
Systems
Test Method for Boiling Range Distribution of Gasoline
and Gasoline Fractions by Gas Chromatography
Specification for Expandable Foam Adhesives for
Fastening Gypsum Wallboard to Wood Framing
Test Method for Torsional Ring Shear Test to Determine
Drained Residual Shear Strength of Cohesive Soils
D 6471
D 6472
D 6474
D 6475
D 6480
D 6482
D 6485
D 6511
E 2042
A 1001
D 6487
D 6491
D 6492
D 6494
D 6496
D 6497
D 6499
D 6502
Specification for Recycled Prediluted Aqueous Glycol
Base Engine Coolant (50 Volume % Minimum) for
Automobile and Light-Duty Service
Specification for Recycled Glycol Base Engine Coolant
Concentrate for Automobile and Light-Duty Service
Test Method for Determining Molecular Weight
Distribution and Molecular Weight Averages of
Polyolefins by High Temperature Gel Permeation
Chromatography
Standard Test Method for Measuring Mass Per Unit
Area of Erosion Control Blankets
Test Method for Wipe Sampling of Surfaces, Indirect
Preparation, and Analysis for Asbestos Structure
Number Concentration by Transmission Electron
Microscopy
Test Method for Determination of Cooling
Characteristics of Aqueous Polymer Quenchants by
Cooling Curve Analysis with Agitation (Tensi Method)
Guide for Risk Characterization of Acute and Irritant
Effects of Short-Term Exposure to Volatile Organic
Chemicals Emitted from Bedding Sets
Test Methods for Solvent Bearing Bituminous
Compounds
Practice for Cleaning and Maintaining Controlled Areas
and Clean Rooms
Standard Specification for High Strength Steel Castings
in Heavy Sections
Practice for Preparing Prints of Paste Printing Inks With
the Little Joe Offset Color Proofing Press
Practice for Evaluation of Aging Resistance of
Prestressed Prepainted Metal In a Dry Heat Test
Practice for Detection of Hexavalent Chromium On Zinc
and Zinc/Aluminum Alloy Coated Steel
Test Method for Determination of Asphalt Fume
Particulate Matter in Workplace Atmospheres as
Benzene Soluble Fraction
Test Method for Determining Average Bonding Peel
Strength Between the Top and Bottom Layers of
Needle-Punched Geosynthetic Clay Liners
Standard Guide for Mechanical Attachment of
Geomembrane to Penetrations or Structures
Test Method for The Immunological Measurement of
Antigenic Protein in Natural Rubber and its Products
Test Method for On-Line Measurement of Low Level
Particulate and Dissolved Metals in Water by X-Ray
Fluorescence (XRF)
D 6504
D 6506
D 6509
E 2009
E 2048
F 1996
G 164
G 165
E 2050
E 2051
E 2053
E 2055
E 2056
F 1992
F 1995
F 1997
PS 120
A 342/A 342M
C 1446
Practice for On-Line Determination of Cation
Conductivity in High Purity Water
Specification for Asphalt Based Protection Board for
Below-Grade Waterproofing
Specification for Atactic Polypropylene (APP) Modified
Bituminous Base Sheet Materials Using Glass Fiber
Reinforcements
Test Method for Oxidation Onset Temperature of
Hydrocarbons by Differential Scanning Calorimetry
Guide for Detection of Nucleic Acids of the
Mycobacterium Tuberculosis Complex and Other
Pathogenic Mycobacteria by the Polymerase Chain
Reaction Technique
Test Method for Silver Migration for Membrane Switch
Circuitry
Test Method for Determination of Surface Lubrication
on Flexible Webs
Practice for Determining Rail-to-Earth Resistance
Test Method for Determination of Total Carbon in Mold
Powders by Combustion-Infrared Absorption Method
Practice for the Determination of Lead in Paint, Settled
Dust, Soil and Air Particulate by Field-Portable
Electroanalysis
Guide for Planning, Carrying Out, and Reporting
Traceable Chemical Analyses of Metals, Ores, and
Related Materials
Practice for Referencing Test Methods for Chemical
Analysis of Metals and Related Materials
Standard Practice for Qualifying Spectrometers and
Spectrophotometers for Use in Multivariate Analyses,
Calibrated Using Surrogate Mixtures
Practice for Reprocessing of Reusable, Heat-Stable
Endoscopic Accessory Instruments (EAI) Used with
Flexible Endoscopes
Test Method for Determining the Bond Strength of a
Surface Mount Device (SMD) on a Membrane Switch
by Applying Shear Force
Test Method for Determining the Sensitivity (Teasing)
of a Tactile Membrane Switch
Provisional Safety Specification for Window Fall
Prevention Devices With Emergency Escape (Egress)
Release Mechanisms
Standard Test Methods for Permeability of Feebly
Magnetic Materials
Standard Test Method for Measuring Consistency and
Working Time of Self-Flowing Castable Refractories
C 37/C 37M
D 5230
D 6396
D 6469
D 6470
D 6488
D 6458
D 6459
D 6460
D 6466
A 1005/A 1005M
A 1006/A 1006M
D 6493
E 2003
E 2039
E 2043
E 2044
E 2047
E 2049
F 1963
F 1991
D 6468
Standard Specification for Gypsum Lath
Test Method for Carbon Black - Automated Individual
Pellet Hardness
Standard Test Method for Testing of Pipe Thread
Sealants on Pipe Tees
Standard Guide for Microbial Contamination in Fuels
and Fuel Systems
Standard Test Method for Salt in Crude Oils
(Potentiometric Method)
Standard Terminology Relating to Print Problems
Standard Tables of Body Measurements for Boys, Sizes
8 to 14 Slim and 8 to 20 Regular
Standard Test Method for Determination of Erosion
Control Blanket (ECB) Performance in Protecting
Hillslopes from Rainfall-Induced Erosion
Standard Test Method for Determination of Erosion
Control Blanket (ECB) Performance in Protecting
Earthen Channels from Stormwater-induced Erosi
Standard Test Method for Diameter of Wool and Other
Animal Fibers By Sirolan-Laserscan Fiber Diameter
Analyser
Standard Specification for Steel Line Pipe, Black, Plain
End, Logitudinal and Helical Seam, Double SubmergedArc Welded
Standad Specification for Steel Line Pipe, Black, Plain
End, Laser Beam Welded
Standard Test Methods for Softening Point of
Hydrocarbon Resins by Automated Ring and Ball
Apparatus
Standard Practice for Fabrication of the Neutron
Radiographic Beam Purity Indicators
Standard Practice for Determining and Reporting
Dynamic Dielectric Properties
Standard Test Method for Nonvolatile Matter of
Agricultural Adjuvant Solutions by Thermogravimetry
Test Method for Spreading of Liquid Agricultural Spray
Mixtures
Test Method for Wet Insulation Integrity Testing of
Photovoltaic Arrays
Standard Guide for Quantitative Evaluation of
Fragrance/Odors for Shampoos and Hair Conditioners
Standard Specification for Deep-Fat Fryers, Gas or
Electric, Open
Standard Test Method for Performance of Chinese
(Wok) Ranges
Standard Test Method for High Temperature Stability of
A 677/A 677M
A 944
B 124/B 124M
B 16/B 16M
B 171/B 171M
B 903
C 1393
C 1430
C 1453
C 1454
C 1455
C 1458
C 36/C 36M
D 6442
D 6483
D 6501
D 6503
D 6484
D 6486
D 6489
Distillate Fuels
Specification for Nonoriented Electrical Steel Fully
Processed Types
Standard Test Method for Comparing Bond Strength of
Steel Reinforcing Bars to Concrete Using Beam-End
Specimens
Specification for Copper and Copper Alloy Forgings
Rod, Bar, and Shapes
Standard Specification for Free-Cutting Brass Rod, Bar
and Shapes for Use in Screw Machines
Standard Specification for Copper-Alloy Plate and Sheet
for Pressure Vessels, Condensers, and Heat Exchangers
Standard Specification for Seamless Copper Heat
Exchanger Tubes with Internal Enhancement
Spcification for Perprendicularly Oriented Mineral Fibre
Roll and Sheet Thermal Insulation for Pipes and Tanks
Test Method for Determination of Uraniu, Oxygen to
Uranium (O/U), and Oxygen to Metal (O/M) in Sintered
Uranium Dioxide and Gadolinia-Uranium Dioxide
Pellets by Atmospheric Equillibration
Test Method for the Determination of Uranium by
Ignition and the Oxygen to Uranium (O/U) Atomic
Ratio of Nuclear Grade Uranium Dioxide Powders and
Pellets
Guide for Pyrophoricity/Combustibility Testing in
Support of Pyrophoricity Analyses of Metallic Uranium
Spent Nuclear Fuel
Guide for Nondestructive Assay of Special Nuclear
Material Holdup Using Gamma-Ray Spectroscopic
Methods
Test Method for Nondestructive Assay of Plutonium,
Tritium and 241 Am by Calorimetric Assay
Spcification for Gypsum Wallboard
Test Method for Copper Release Rates of Antifouling
Coating Systems in Seawater
Test Method for Evaluaion of Diesel Engine Oils in T-9
Diesel Engine
Test Method for Phosphonate in Brines
Test Method for Enterococci in Water Using Enterolert
Test Method for Open-Hole Compressive Strength of
Polymer Matric Composite laminates
Standard Practice for Short Term Vehicle Service
Exposure of Automotive Coatings
Test Method for Determining the Water Absorption of
Hardened Concrete Treated with a Water Repellent
Coating
D 6490
D 6498
D 6505
D 6507
D 6508
D 6513
D 6514
D 6515
D 6518
D 6520
D 6521
D 6524
D 6526
E 2046
E 2052
D 6523
D 6525
D 6528
D 6531
A 1021
D 6522
Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
Guide for Household Hazardous Waste Training Outline
for Household Hazardous Wate Collection Operations
Test Method for Assay of Normal-Propyl Bromide
Content
Practice for Fiber Reinforcement Orientation Codes for
Composite Materials
Test Method for Determination of Dissolved Inorganic
Anions in Aqueous Matrices using Capilliary Ion
Electrophoresis and Chromate Electrolyte
Practice for Calculating the Superimposed Load on
Wood-frame Walls for Standard Fire-Endurance Tests
Test Method for High Temperature Universal Oxidation
Test for Turbine Oils
Test method for Rubber Shaft Seals Determination of
Recovery From Bending
Practice for Bias Testing a Machanical Coal Sampling
System
Practice for the Solid Phase Micro Extraction (SPME) of
Water and its Headspace for the Analysis of Volatile and
Semi-Volatile Organic Compounds
Practice for Accelerated Aging of Asphalt Binder Using
a Pressurized Aging Vessel (PAV)
Test Method for Measuring the Resiliency of Turf
Reinforcement Mats (TRMs)
Test Method for Analysis of Toluene by Capillary
Column Gas Chromatography
Test Method for Reaction Induction Time by Thermal
Analysis
Guide for Evaluation, management, and Control of Lead
Hazards in Facilities
Guide for Evaluation and Selection of Alternative Dally
Covers (ADCs) for Sanitary Landfills
Test Method for Measuring Nominal Thickness of
Permanent Rolled Erosion Control Products
Test Method for Consolidated Undrained Direct Simple
Shear Testing of Cohesive Soils
Test Method for Relative Tinting Strength of Aqueous
Ink Systems by Instrumental Measurement
Standard Specification for Martensitic Stainless Steel
Forgings and Forging Stock for High-Temperature
Service
Test Method for Determination of Nitrogen Oxides,
Carbon Monoxide, and Oxygen Concentrations in
Emissions from Natural Gas-Fired Reciprocating
D 6532
E 1681
E 2041
E 2054
E 2057
E 2058
E 2059
E 2062
E 2066
E 2067
E 2072
E 2060
E 2063
E 2064
E 2068
E 2073
E 2075
E 2076
E 699
Engines, Combustion Turbins, Boilers, and Process
Heaters Using Portable Analyzers
Test Method for Evaluation of the Effect of Clear Water
Repellent Treatments on Water Absorption of Hydraulic
Cement Mortar Specimens
Test Method for Determining Threshold Stress Intensity
Factor for Environment-Assisted Cracking of Metallic
Materials
Method for Estimating Kinetic Parameters by
Differential Scanning Calorimeter Using the Borchardt
and Daniels Method
Practice for Performance - Based Description of
Instruments in Chemical Analysis Methods
Specifications for Preparation of Laboratory Analysis
Requests in Sexual Assault Investigations
Standard Test Methods for Measurement of Synthetic
Polymer Material Flammability Using a Fire
Propagation Apparatus (FPA)
Practice for Application and Analysis of Nuclear
Research Emulsions for Fast Neutron Dosimetry
Guide for PDD Examination Standards of Practice
Guide for Validation of Laboratory Information
Management Systems
Practice for Full-Scale Oxygen Consumption
Calorimetry Fire Tests
Specification for Photoluminescent (Phosphorescent)
Safety Markings
Guide for Use of Coal Combustion Products for
Solidification/Stabilization of Inorganic Wastes
Practice for Calibration and Functionality Checks Use in
Forensic Psychophysiological Detection of Deception
(Plygraph) Examinations
Guide for Minimum Continiung Education of
Individuals Involved in the Psychophysiological
Detection of Deception (PDD)
Test Method for Determination of Operating Force of
Sliding Windows and Doors
Test Method for Photopic Luminance of
Photoluminescent (Phosphorescent) Markings
Practice for Verifying the Consistency of AE-Sensor
Response using an Acrylic Rod
Test Method for Examination of Fibreglass Reinforced
Plastic Fan Blades using Acoustic Emission
Criteria for Evaluation of Agencies Involved in Testing,
Quality Assurance, and Evaluating Building
Components in Accordance with Test Methods
F 1941M
F 1987
F 1994
F 1999
F 2000
F 2001
F 2002
F 2003
F 2005
F 2004
F 2007
F 2008
F 2010
PS 105
PS 124
F 1033
F 1986
D 6519
C 61/C 61M
C 779/C 779M
D 1318
D 2344/D 2344M
D 3174
Promulgated by ASTM Committee E-6
Specification for Electrodeposited Coatings on Threaded
Fasteners (Matric)
Specification for Multilayer Pipe Type 2, Compression
Fittings, and Compression Joints for Hydronic Heating
Systems
Test Method for Shipboard Fixed Foam Firefighting
Systems
Practice for Installation of Rigid Poly(Vinyl Chloride)
(PVC) Fence Systems
Guide for Fences for Ballfields and Other Sports
Facilities
Guide for Vessel-Related Technical Information for Use
in Developing an Electronic Database and Ship Safety
Record
Standard Terminology Relating to Anesthesia and
Respiratory Equipment
Guide for Accelerated Aging of Ultra-High Molecular
Weight Polyethylene
Terminology for Nickel-Titanium Shape Memory
Alloys
Test Method for Transformation Temperature of NickelTitanium Alloys by Thermal Analysis
Practice for the Classification, Dsign, Manufacture, and
Operation of Concession Go-Karts and Facilities
Guide for Qualitative Observations of Skimmer
Performance
Test Method for Evaluation of Glove Effects on Wearer
Hand Dexterity Using a Modified Pegboard Test
Provisional Specification for Dedicated Short-Range
Communication (DSRC) Data Link Layer
Provisionla Standard Test Method for Measuring
Maximum Spontaneous heating Temperature of Art
Materials
Test Methods for Comparing Lift-Off Correction Media
Specification for Composite Pipe, Compression Fittings
and Compression Joints for Hot and Cold Drinking
Water Systems
D 6519 - 00
Specification for Gypsum Keene's Cement
C 779/C 779M - 00
D 1318 - 00
Standard Test Method for Short-Beam Strength of
Polymer Matrix Composite Materials and Their
Laminates
Ash in the Analysis Sample of Coal and Coke from Coal
D 4770
D 6476
D 6478
D 6479
D 6495
A 1005/A 1005M
D 6543
D 6546
D 6500
C 1460
A 1007
A 335/A 335M
A 437/A 437M
A 726
B 249/B 249M
B 706
B 901
B 902
B 904
B 905
B 906
C 59/C 59M
C 1440
C 318/C 318M
C 1461
C 1462
C 1463
C 1464
C 1465
C 1466
F 2012
F 2013
F 2018
F 2019
F 2025
F 2026
E 2094
F 2030
Test Method for Appearance and Integrity of Highloft
Batting After Refurbishing
Standard Test Method for Determining Dynamic Air
Permeability of Inflatable Restraint Fabrics
D 6478 - 99
D 6479 - 00
D 6495 - 99
A 1005/A 1005M - 00e1
Standard Guide to the Evaluation of Measurements
Made by On-Line Coal Analyzers
D 6546 - 00
D 6500 - 00
C 1460 - 00
A 1007 - 00
A 335/A 335M - 00
Standard Specification for Alloy-Steel Turbine-Type
Bolting Material Specially Heat Treated for HighTemperature Service
A 726 - 00
B 249/B 249M - 00
B 706 - 00
B 901 - 00
B 902 - 00
B 904 - 00
B 905 - 00
B 906 - 00
Specification for Gypsum Casting Plaster and Gypsum
Molding Plaster
C 1440 - 99e1
C 318/C 318M - 00
C 1461 - 00
C 1462 - 00
C 1463 - 00
C 1464 - 00
C 1465 - 00
C 1466 - 00
Standard Consumer Safety Performance Specification
for Stationary Activity Centers
F 2013 - 00
F 2018 - 00
F 2019 - 00
F 2025 - 00
F 2026 - 00
E 2094 - 00
F 2030 - 00
E 2092
F 2032
F 2033
F 2034
F 2035
F 2036
F 2037
F 2040
F 2041
F 2043
F 2048
F 2050
G 167
F 2027
E 2074
PS 91
D 6555
D 6558
D 6559
D 6563
D 6580
E 1549
E 1731
E 1882
E 2021
E 2059
E 2069
E 2096
E 2071
D 6551
E 2077
E 2079
E 2080
E 2082
E 2083
E 2084
E 2085
E 2092 - 00
F 2032 - 00
Standard Specification for Total Hip Joint Prosthesis
and Hip Endoprosthesis Bearing Surfaces Made of
Metallic, Ceramic, and Polymeric Material
Standard Specification for Sheet Linoleum Floor
Covering
F 2035 - 00
F 2036 - 00
F 2037 - 00
F 2040 - 00
F 2041 - 00
F 2043 - 00
F 2048 - 00
F 2050 - 00
G 167 - 00
F 2027 - 00
E 2074 - 00
PS 91 - 00
Guide for Evaluating System Effects in RepetitiveMember Wood Assemblies
Standard Test Method for Determination of TGA
CO&inf2; Reactivity of Baked Carbon Anodes and
Cathode Blocks
Standard Test Method for Determination of TGA Air
Reactivity of Baked Carbon Anodes and Cathode
Blocks
D 6563 - 00
D 6580 - 00
E 1549 - 95 (Reapproved 2000)e1
E 1731 - 95e1
E 1882 - 00
E 2021 - 00
E 2059 - 00a
E 2069 - 00
E 2096 - 00
E 2071 - 00
D 6551 - 00
E 2077 - 00
E 2079 - 00
E 2080 - 00
E 2082 - 00
E 2083 - 00
E 2084 - 00
Standard Guide on Security Framework for Healthcare
E 2086
E 2087
E 2088
E 2089
E 2090
E 2070
A 1012
A 476/A 476M
D 6561
C 1474
C 317/C 317M
D 6569
F 2023
F 2038
F 2039
F 24
A 1010
D 4586
D 6553
D 6577
C 1417
C 1469
Information
E 2086 - 00
E 2087 - 00
E 2088 - 00
E 2089 - 00
Standard Test Method for Size-Differentiated Counting
of Particles and Fibers Released from Clean Room
Wipers Using Optical and Scanning Electro
E 2070 - 00
Standard Specification for Seamless and Welded
Ferritic, Austenitic and Duplex Alloy Steel Condenser
and Heat Exchanger Tubes With Integral Fins
Standard Specification for Ductile Iron Castings for
Paper Mill Dryer Rolls
Standard Test Method for Determination of Aerosol
Monomeric and Oligomeric Hexamethylene
Diisocyanate (HDI) in Air with (Methoxy-2-phenyl-1)
Piperazine (MOPIP) in the Workplace
Standard Test Method for Analysis of Isotopic
Composition of Uranium in Nuclear-Grade Fuel
Material by Quadrupole Inductively Coupled PlasmaMass Spectrometry
Standard Specification for Gypsum Concrete
Standard Test Method for On-Line Measurement of Ph
Standard Test Method for Evaluating the Oxidative
Resistance of Crosslinked Polyethylene (PEX) Tubing
and Systems to Hot Chlorinated Water
Standard Guide for Silicone Elastomers, Gels and
Foams Used in Medical Applications Part I Formulations and Uncured Materials
Standard Guide for the Basic Elements of a Shipboard
Occupational Health and Safety Program
Standard Method for Measuring and Counting
Particulate Contamination on Surfaces
Standard Specification for Higher-Strength Martensitic
Stainless Steel Plate, Sheet, and Strip
Standard Specification for Asphalt Roof Cement,
Asbestos-Free
Standard Test Method for Coolant Compatibility of Way
Lubricants
Standard Guide for Testing Industrial Protective
Coatings
Standard Specification for Manufacture of Reinforced
Concrete Sewer, Storm Drain, and Culvert Pipe for
Direct Design
Standard Test Method for Shear Strength of Joints of
C 1479
D 6544
D 6549
D 6570
D 6573/D 6573M
D 6578
D 6584
E 2091
E 2093
F 2014
F 2015
F 2021
C 143/C 143M
D 6583
F 2044
C 685/C 685M
F 2045
F 2049
F 2053
A 463/A 463M
Advanced Ceramics at Ambient Temperature
Standard Practice for Installation of Precast Concrete
Sewer, Storm Drain, and Culvert Pipe Using Standard
Installations
Standard Practice for Preparation of Textiles Prior to
Ultraviolet (UV) Transmission Testing
Standard Test Method for Determination of Cooling
Characteristics of Quenchants by Cooling Curve
Analysis with Agitation (Drayton Unit)
Standard Practice for Assigning Allowable Properties
for Mechanically-Graded Lumber
Standard Specification for General Purpose Wirebound
Shipping Boxes
Standard Practice for Determination of Graffiti
Resistance
Test Method for Determination of Free and Total
Glycerine in B-100 Biodiesel Methyl Esters By Gas
Chromatography
Standard Guide for Use of Activity and Use Limitations,
Including Institutional and Engineering Controls
Standard Guide for Optimizing, Controlling and
Reporting Test Method Uncertainties from Multiple
Workstations in the Same Laboratory Organization
Standard Specification for Non-Reinforced Extruded
Tee Connections for Piping Applications
Standard Specification for Lap Joint Flange Pipe End
Applications
Standard Specification for Design and Installation of
Plastic Syphonic Roof Drainage Systems
Standard Test Method for Slump of Hydraulic-Cement
Concrete
Standard Test Method for Porosity of Paint Film
Standard Specification for Liquid Level Indicating
Equipment, Electrical
Standard Specification for Concrete Made by
Volumetric Batching and Continuous Mixing
Standard Specification for Indicators, Sight, Liquid
Level, Direct and Indirect Reading, Tubular
Glass/Plastic
Standard Guide for Fences/Barriers for Public,
Commercial, and Multi-Family Residential Use Outdoor
Play Areas
Standard Guide for Documenting the Results of
Airborne Particle Penetration Testing of Protective
Clothing Materials
Standard Specification for Steel Sheet, Aluminum-
C 1062
D 6560
C 1473
D 6547
D 6556
D 6562
E 2103
F 1050
F 769
C 1470
D 6077
D 6576
F 2017
F 2024
G 168
A 1009
C 1476
D 6579
E 608/E 608M
Coated, by the Hot-Dip Process
Standard Guide for Design, Fabrication, and Installation
of Nuclear Fuel Dissolution Facilities
Standard Test Method for Determination of Asphaltenes
(Heptane Insolubles) in Crude Petroleum and Petroleum
Products
Test Method for Radiochemical Determination of
Uranium Isotopes in Urine by Alpha Spectrometry
Standard Test Method for Corrosiveness of Lubricating
Fluid to Bimetallic Couple
Standard Test Method for Carbon Black - Total and
External Surface Area by Nitrogen Adsorption
Standard Test Method for Determination of Gaseous
Hexamethylene Diisocyanate (HDI) in Air with 9-(Nmethylaminomethyl) Anthracene Method (MAMA) in
the Workplace
Standard Classification for Bridge Elements and Related
Approach Work
Standard Test Method for Determining Winding Torque
and Tension of Typewriter Ribbons
Standard Test Method for Measuring Transistor and
Diode Leakage Currents
Standard Guide for Testing the Thermal Properties of
Advanced Ceramics
Standard Test Method for Trapezoid Tearing Strength of
Leather
Standard Specification for Flexible Cellular Rubber
Chemically Blown
Standard Guide for Database Structure of Electronic
Data Interchange Between Ship Owner and Shipyard for
Contract Administration
Standard Practice for X-ray Diffraction Determination
of Phase Content of Plasma-Sprayed Hydroxyapatite
Coatings
Standard Practice for Making and Using Precracked
Double Beam Stress Corrosion Specimens
Standard Specification for Soft Magnetic MnZn Ferrite
Core Materials for High Frequency (10 kHz-1 MHz)
Power Transformer and Filter Inductor Applications
Standard Test Method for Analysis of Urine for
Technetium-99 by Inductively Coupled Plasma-Mass
Spectrometry
Standard Practice for Molecular Weight Averages and
Molecular Weight Distribution of Hydrocarbon and
Terpene Resins by Size-Exclusion Chromatography
Standard Specification for Mineral-Insulated, Metal-
F 2020
F 2029
A 1008/A 1008M
A 1011/A 1011M
E 2061
F 2046
B 907
D 5052/D 5052M
C 1468
D 6416/D 6416M
D 6568
D 6581
E 2097
F 2047
F 2054
A 945/A 945M
A 946
Sheathed Base Metal Thermocouples
Standard Practice for Design, Construction, and
Procurement of Emergency Medical Services Systems
(EMSS) Ambulances
Standard Practices for Making Heatseals for
Determination of Heatsealability of Flexible Webs as
Measured by Seal Strength
Standard Specification for Steel, Sheet, Cold-Rolled,
Carbon, Structural, High-Strength Low-Alloy and HighStrength Low-Alloy with Improved Formability
Standard Specification for Steel, Sheet and Strip, HotRolled, Carbon, Structural, High-Strength Low-Alloy
and High-Strength Low-Alloy with Improved
Formability
Guide for Fire Hazard Assessment of Rail
Transportation Vehicles
Standard Specification for Tachometers, Various
Standard Specification for Zinc, Tin and Cadmium Base
Solders
Standard Test Method for Permeability of Leather to
Water Vapor
Standard Test Method for Transthickness Tensile
Strength of Continuous Fiber-Reinforced Advanced
Ceramics at Ambient Temperature
Standard Test Method for Two-Dimensional Flexural
Properties of Simply Supported Sandwich Composite
Plates Subjected to a Distributed Load
Standard Guide for Planning, Carrying Out, and
Reporting Traceable Chemical Analyses of Water
Samples
Standard Test Method for Bromate, Bromide, Chlorate,
and Chlorite in Drinking Water by Chemically
Suppressed Ion Chromatography
Standard Guide for Determining the Impact of
Extractables from Non-Metallic Materials on the Safety
of Biotechnology Products
Standard Practice for Workers' Compensation Coverage
of Emergency Services Volunteers
Standard Test Method for Burst Testing of Flexible
Package Seals Using Internal Air Pressurization Within
Restraining Plates
Standard Specification for High-Strength Low-Alloy
Structural Steel Plate with Low Carbon and Restricted
Sulfur for Improved Weldability, Formability, and
Toughness
Standard Specification for Chromium, Chromium-
B 345/B 345M
B 909
B 910/B 910M
B 911/B 911M
C 330
C 1231/C 1231M
C 1477
C 1480
C 1481
D 3552
D 6484/D 6484M
D 6554
D 6557
D 6574
D 6575
D 6582
D 6585
D 6586
Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for
Corrosion and Heat Resisting Service
Standard Specification for Aluminum and AluminumAlloy Seamless Pipe and Seamless Extruded Tube for
Gas and Oil Transmission and Distribution Piping
Systems
Standard Guide for Plane Strain Fracture Toughness
Testing of Non-Stress Relieved Aluminum Products
Standard Specification for Annealed Copper-Clad Steel
Wire
Standard Specification for ACSR Twisted Pair
Conductor (ACSR/TP)
Standard Specification for Lightweight Aggregates for
Structural Concrete
Standard Practice for Use of Unbonded Caps in
Determination of Compressive Strength of Hardened
Concrete Cylinders
Standard Test Method for Isotopic Abundance Analysis
of Uranium Hexafluoride by Multi-Collector,
Inductively Coupled Plasma-Mass Spectrometry
Standard Specification for Packaged, Pre-Blended, Dry,
Combined Materials for Use in Wet or Dry Shotcrete
Application
Standard Guide for Use of Joint Sealants with Exterior
Insulation and Finish Systems (EIFS)
Test Method for Tensile Properties of Fiber Reinforced
Metal Matrix Composites
Standard Test Method for Open-Hole Compressive
Strength of Polymer Matrix Composite Laminates
Standard Performance Specification for 100 % Cotton
Denim Fabrics
Standard Test Method for Evaluation of Rust Preventive
Characteristics of Automotive Engine Oils
Test Method for Determining the (in-Plane) Hydraulic
Transmissivity of a Geosynthetic by Radial Flow
Standard Test Method for Determining Stiffness of
Geosynthetics Used as Turf Reinforcement Mats
(TRM's)
Standard Guide for Ranked Set Sampling: Efficient
Estimation of a Mean Concentration in Environmental
Sampling
Standard Specification for Unsintered
Polytetrafluoroethylene (PTFE) Extruded Film or Tape
Standard Practice for the Prediction of Contaminant
Adsorption On GAC In Aqueous Systems Using Rapid
Small-Scale Column Tests
E 2100
E 2107
F 2022
D 6589
D 6590/D 6590M
D 6595
D 662
E 2078
E 2101
E 2105
E 2106
E 2108
F 1192
F 2042
F 2052
F 2056
F 2057
F 617
Standard Practice for Calculating the International
Runway Friction Index
Standard Practice for Environmental Regulatory
Compliance Audits
Standard Test Method for Performance of Booster
Heaters
Standard Guide for Statistical Evaluation of
Atmospheric Dispersion Model Performance
Standard Specification for Pressure-Sensitive Tape for
Sealing Fiber Containers and Cans
Standard Test Method for Determination of Wear Metals
and Contaminants in Used Lubricating Oils or Used
Hydraulic Fluids by Rotating Disc Electrode Atomic
Emission Spectro
Standard Test Method for Evaluating Degree of Erosion
of Exterior Paints
Standard Guide for Analytical Data Interchange
Protocol for Mass Spectrometric Data
Standard Test Method for Measuring the Frictional
Properties of Winter Contaminated Pavement Surfaces
Using an Averaging-Type Spot Measuring
Decelerometer
Standard Practice for General Techniques of
Thermogravimetric Analysis (TGA) Coupled With
Infrared Analysis (TGA/IR)
Standard Practice for General Techniques of Liquid
Chromatography-Infrared (LC/IR) and Size Exclusion
Chromatography-Infrared (SEC/IR) Analyses
Standard Practice for Calibration of the Electron
Binding-Energy Scale of an X-Ray Photoelectron
Spectrometer
Standard Guide for the Measurement of Single Event
Phenomena (SEP) Induced by Heavy Ion Irradiation of
Semiconductor Devices
Standard Guide for Silicone Elastomers, Gels, and
Foams Used in Medical Applications Part II Crosslinking and Fabrication
Standard Test Method Measurement of Magnetically
Induced Displacement Force on Passive Implants in the
Magnetic Resonance Environment
Standard Safety and Performance Specification for
Soccer Goals
Standard Safety Specification for Chests, Door Chests,
and Dressers
Standard Test Method for Measuring MOSFET Linear
Threshold Voltage
F 2055
C 1482
C 1483
C 1484
C 1485
C 1486
C 1487
C 1488
C 1489
C 1491
C 1492
D 4437
D 5448/D 5448M
D 5450/D 5450M
D 6140
D 6517
D 6564
D 6600
D 6527
D 6565
D 6566
D 6567
Standard Test Method for Size and Squareness of
Resilient Floor Tile by Dial Gage Method
Standard Specification for Polyimide Flexible Cellular
Thermal and Sound Absorbing Insulation
Standard Specification for Exterior Solar Radiation
Control Coatings on Buildings
Standard Specification for Vacuum Insulation Panels
Standard Test Method for Critical Radiant Flux of
Exposed Attic Floor Insulation Using an Electric
Radiant Heat Energy Source
Standard Practice for Testing Chemical-Resistant
Broadcast and Slurry-Broadcast Resin Monolithic Floor
Surfacings
Standard Guide for Remedying Structural Silicone
Glazing
Standard Practice for Simulated Aging of Loose-Fill
Insulation
Standard Specification for Lime Putty for Structural
Purposes
Standard Specification for Concrete Roof Pavers
Standard Specification for Concrete Roof Tile
Standard Practice for Determining the Integrity of Field
Seams Used in Joining Flexible Polymeric Sheet
Geomembranes
Standard Test Method for Inplane Shear Properties of
Hoop Wound Polymer Matrix Composite Cylinders
Standard Test Method for Transverse Tensile Properties
of Hoop Wound Polymer Matrix Composite Cylinders
Standard Method to Determine Asphalt Retention of
Paving Fabrics Used in Asphalt Paving for Full-Width
Applications
Standard Guide for Field Preservation of Ground-Water
Samples
Standard Guide for Field Filtration of Ground-Water
Samples
Standard Practice for Evaluating Test Sensitivity for
Rubber Test Methods
Standard Test Method for Determining Unsaturated and
Saturated Hydraulic Conductivity in Porous Media by
Steady-State Centrifugation
Standard Test Method for Determination of Water
(Moisture) Content of Soil by the Time-Domain
Reflectometry (TDR) Method
Standard Test Method for Measuring Mass per Unit
Area of Turf Reinforcement Mats
Standard Test Method for Measuring the Light
D 6572
D 6594
D 6596
D 6597
D 6601
D 6602
D 6603
D 6604
D 6605
D 6606
D 6609
D 6610
D 6614
D 6608
D 6615
D 6617
D 6619
D 6620
D 6621
D 6622
D 6624
D 6625
Penetration of a Turf Reinforcement Mat (TRM)
Standard Test Methods for Determining Dispersive
Characteristics of Clayey Soils by the Crumb Test
Standard Test Method for Evaluation of Corrosiveness
of Diesel Engine Oil at 135° C
Standard Practice for Ampulization and Storage of
Gasoline and Related Hydrocarbon Materials
Standard Practice for Assessment of Attaining Clean Up
Level for Site Closure
Standard Test Method for Rubber Properties Measurement of Cure and After-Cure Dynamic
Properties Using a Rotorless Shear Rheometer
Standard Practice for Sampling and Testing of Possible
Carbon Black Fugitive Emissions or Other
Environmental Particulate, or Both
Standard Guide for Labeling of UV-Protective Textiles
Standard Practice for Glass Transition Temperatures of
Hydrocarbon Resins by Differential Scanning
Calorimetry
Standard Practice for Determining the Color Stability of
Hydrocarbon Resins After Heating
Standard Test Method for Viscosity and Yield of
Vehicles and Varnishes by the Duke Viscometer
Standard Guide for Part-Stream Sampling of Coal
Standard Practice for Manual Sampling of Coal from
Stockpiles
Standard Test Method for Stretch Properties of Textile
Fabrics - CRE Method
Standard Practice for the Identification of Trinidad Lake
Asphalt in Asphalt Mixes
Standard Specification for Jet B Wide-Cut Aviation
Turbine Fuel
Standard Practice for Laboratory Bias Detection Using
Single Test Result from Standard Material
Standard Practice for Incorporating Pigments by High
Speed Dispersion
Standard Practice for Asbestos Detection Limit Based
on Counts
Standard Practice for Performance Testing of Process
Analyzers for Aromatic Hydrocarbon Materials
Standard Guide for Application of Fully Adhered HotApplied Reinforced Waterproofing Systems
Standard Practice for Determining a Flow-Proportioned
Average Property Value (FPAPV) for a Collected Batch
of Process Stream Material Using Stream Analyzer Data
Standard Practice for Conducting a Test of Protective
D 6627
D 6628
D 6630
D 6631
D 6632
E 2012
E 2110
A 840/A 840M
E 2065
E 2109
E 2114
E 2115
E 2117
E 2118
E 2119
E 2120
E 2121
E 2126
Properties of Polish Applied to a Painted Panel Using
Fluorescent UV-Condensation Light- and WaterExposure Apparatu
Standard Test Method for Determination of a Volatile
Distillate Fraction of Cold Asphalt Mixtures
Standard Specification for Color of Pavement Marking
Materials
Standard Guide for Low Slope Insulated Roof
Membrane Assembly Performance
Standard Guide for Committee D01 for Conducting an
Interlaboratory Study, and Determining the Precision of
a Test Method
Standard Test Method for Total Copper in Antifouling
Paints
Standard Guide for the Preparation of a Binary
Chemical Compatibility Chart
Standard Terminology for Exterior Insulation and Finish
Systems (EIFS)
Standard Specification for Fully Processed Magnetic
Lamination Steel
Standard Guide for Ethical Requirements for
Psychophysiological Detection of Deception (PDD)
Examiners
Test Methods for Determining Area Percentage Porosity
in Thermal Sprayed Coatings
Standard Terminology for Sustainability Relative to the
Performance of Buildings
Standard Guide for Conducting Lead Hazard
Assessments of Residential Housing and Other
Properties Frequented by Children
Standard Guide for Identification and Establishment of a
Quality Assurance Program for Medical Transcription
Standard Guide for Coordination of Clinical Laboratory
Services within the Electronic Health Record
Environment and Networked Architectures
Standard Practice for Quality Systems for Conducting In
Situ Measurements of Lead Content in Paint or Other
Coatings Using Field-Portable X-Ray Fluorescence
(XRF) Devices
Standard Practice for the Performance Evaluation of the
Portable X-Ray Fluorescence Spectrometer for the
Measurement of Lead in Paint Films
Standard Practice for Installing Radon Mitigation
Systems in Existing Low-Rise Residential Buildings
Standard Test Methods for Cyclic (Reversed) Load Test
for Shear Resistance of Framed Walls for Buildings
E 2127
A 1008
B 152/B 152M
E 2131
E 2132
A 1011
A 1013
A 1014
A 1017/A 1017M
B 151/B 151M
B 701/B 701M
B 787/B 787M
B 913
B 914
E 2129
E 2135
F 2059
F 2060
F 2067
Standard Methods of Static Load Test for Combined
Tensile and Transverse Load Resistance of Paneled Wall
Systems in Building Construction
Standard Specification for Steel, Sheet, Cold-Rolled,
Carbon, Structural, High-Strength Low-Alloy and HighStrength Low-Alloy with Improved Formability
Standard Specification for Copper Sheet, Strip, Plate,
and Rolled Bar
Standard Practice for Assessing Loss, Damage, or
Destruction of Property
Standard Practice for Physical Inventory of Durable,
Moveable Property
Standard Specification for Steel, Sheet and Strip, HotRolled, Carbon, Structural, High-Strength Low-Alloy
and High-Strength Low-Alloy with Improved
Formability
Standard Test Method for High-Frequency (10 kHz-1
MHz) Core Loss of Soft Magnetic Core Components at
Controlled Temperatures Using the VoltmeterAmmeter-Wattmeter Method
Standard Specification for Precipitation-Hardening
Bolting Material (UNS N07718) for High Temperature
Service
Standard Specification for Pressure Vessel Plates, Alloy
Steel, Chromium-Molybdenum-Tungsten
Standard Specification for Copper-Nickel-Zinc Alloy
(Nickel Silver) and Copper-Nickel Rod and Bar
Standard Specification for Concentric-Lay-Stranded
Self-Damping Aluminum Conductors, Steel Reinforced
(ACSR/SD)
Standard Specification for 19 Wire Combination UnilayStranded Copper Conductors for Subsequent Insulation
Standard Test Method for Evaluation of Crimped
Electrical Connections to 16-Gauge and Smaller
Diameter Stranded and Solid Conductors
Standard Practice for Color Codes on Zinc and Zinc
Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
Standard Practice for Data Collection for Sustainability
Assessment of Building Products
Standard Terminology for Property and Asset
Management
Standard Test Method for Laboratory Oil Spill
Dispersant Effectiveness Using The Swirling Flask
Standard Guide for Maintaining Cool Season
Turfgrasses on Athletic Fields
Standard Practice for Development and Use of Oil-Spill
F 2068
F 2069
F 2061
F 2062
F 2063
F 2064
F 2065
F 2066
F 2070
F 2071
F 2072
F 2073
F 2074
F 2077
F 2079
F 2081
PS 106
B 916
D 6398
F 2082
PS 119
Trajectory Models
Standard Specification for Femoral Prostheses - Metallic
Implants
Standard Practice for Evaluation of Explosives Vapor
Detectors
Standard Practice for Chemical Protective Clothing Care
and Maintenance Instructions
Standard Specification for Square Drive
Interconnections on Surgical Instruments
Standard Specification for Wrought Nickel-Titanium
Shape Memory Alloys for Medical Devices and Surgical
Implants
Standard Guide for Characterization and Testing of
Alginates as Starting Materials Intended for Use in
Biomedical and Tissue-Engineered Medical Products
Application
Standard Practice for Testing for Alternative Pathway
Complement Activation in Serum by Solid Materials
Standard Specification for Wrought Titanium-15
Molybdenum Alloy for Surgical Implant Applications
(UNS R58150)
Standard Specification for Transducers, Pressure and
Differential, Pressure, Electrical and Fiber-Optic
Standard Specification for Switch, Position Proximity
(Noncontact) or Limit (Mechanical Contact), FiberOptic
Standard Practice for Hosedown of a Membrane Switch
Standard Test Method for Non-Destructive Short Circuit
Testing of a Membrane Switch
Standard Guide for Measuring Diameter of Silicon and
Other Semiconductor Wafers
Test Methods For Intervertebral Body Fusion Devices
Standard Test Method for Measuring Recoil of BalloonExpandable Stents
Standard Guide for Characterization and Presentation of
the Dimensional Attributes of Vascular Stents
Provisional Standard Specification for Rods and Tubes
of Polyethylene (PE)
Standard Test Method for Adherence of Porcelain
Enamel Coatings to Sheet Metal
Standard Practice to Enhance Identification of Drug
Names on Labels
Standard Test Method for Determination of
Transformation Temperature of Nickel-Titanium Shape
Memory Alloys by Bend and Free Recovery
Provisional Standard Specification for Child-Resistant
PS 127
A 1015
A 1016/A 1016M
A 955/A 955M
B 915
C 138/C 138M
C 1414
C 1490
C 1494
C 173/C 173M
D 5449/D 5449M
D 6587
D 6626
D 6629
D 6545
D 6591
D 6592
D 6607
D 6633
D 6634
Portable Gasoline Containers for Consumer Use
Standard Test Method for Evaluating the Ignition
Sensitivity and Fault Tolerance of Oxygen Regulators
Used for Medical and Emergency Applications
Standard Guide for Videoborescoping of Tubular
Products for Sanitary Applications
Standard Specification for General Requirements for
Ferritic Alloy Steel, Austenitic Alloy Steel, and
Stainless Steel Tubes
Standard Specification for Deformed and Plain Stainless
Steel Bars for Concrete Reinforcement
Standard Test Method for Measuring the Static Heat
Resistance of a Self-Cleaning Oven Coating
Standard Test Method for Density (Unit Weight), Yield,
and Air Content (Gravimetric) of Concrete
Standard Practice for The Separation of Americium
from Plutonium by Ion Exchange
Standard Guide for the Selection, Training and
Qualification of Nondestructive Assay (NDA) Personnel
Standard Test Methods for Determination of Mass
Fraction of Carbon, Nitrogen, and Oxygen in Silicon
Nitride Powder
Standard Test Method for Air Content of Freshly Mixed
Concrete by the Volumetric Method
Standard Test Method for Transverse Compressive
Properties of Hoop Wound Polymer Matrix Composite
Cylinders
Standard Test Method for Yarn Number Using
Automatic Tester
Standard Specification for Graded Trinidad Lake
Modified Asphalt Binder
Standard Guide for Selection of Methods for Estimating
Soil Loss by Erosion
Standard Test Method for Flammability of Textiles
Used in Children's Sleepwear
Standard Test Method for Determination of Aromatic
Hydrocarbon Types in Middle Distillates - High
Performance Liquid Chromatography Method with
Refractive Index Detection
Standard Test Method for Portable Chemiluminescent
Water Quality Determination
Standard Practice for Inclusion of Precision Statement
Variation in Specification Limits
Standard Test Method for Basic Functional Stability of a
Mechanical Pump Dispenser
Standard Guide for the Selection of Purging and
D 6636
D 6638
D 6639
D 6640
D 6641
D 6642
D 6647
D 6655
D 6657
A 1020/A 1020M
D 6677
E 2128
D 6656
D 6658
D 6659
D 6661
D 6676
E 2111
E 2113
E 2116
Sampling Devices for Ground-Water Monitoring Wells
Standard Test Method for Determination of Ply
Adhesion Strength of Reinforced Geomembranes
Standard Test Method for Determining Connection
Strength Between Geosynthetic Reinforcement and
Segmental Concrete Units (Modular Concrete Blocks)
Standard Guide for Using the Frequency Domain
Electromagnetic Method for Subsurface Investigations
Standard Practice for Collection and Handling of Soils
Obtained in Core Barrel Samplers for Environmental
Investigations
Standard Test Method for Determining the Compressive
Properties of Polymer Matrix Composite Laminates
Using a Combined Loading Compression (CLC) Test
Fixture
Standard Guide for Comparison of Techniques to
Quantify the Soil-Water (Moisture) Flux
Standard Test Method for Determination of Acid
Soluble Iron Via Atomic Absorption
Standard Terminology Relating to Mechanical Pump
Dispensers
Standard Test Method for pH of Wet Blue
Standard Specification for Steel Tubes, Carbon and
Carbon Manganese, Fusion Welded, for Boiler,
Superheater, Heat Exchanger and Condenser
Applications
Standard Test Method for Evaluating Adhesion by Knife
Standard Guide for Evaluating Water Leakage of
Building Walls
Standard Test Method for Determination of Chromic
Oxide in Wet Blue (Perchloric Acid Oxidation)
Standard Test Method for Volatile Matter (Moisture) of
Wet Blue by Oven Drying
Standard Practice for Sampling and Preparation of Wet
Blue for Physical and Chemical Tests
Standard Practice for Field Collection of Organic
Compounds from Surfaces Using Wipe Sampling
Standard Test Method for Cathodic Disbonding of
Exterior Pipeline Coatings at Elevated Temperatures
Using Interior Heating
Standard Quantitative Carrier Test Method To Evaluate
the Bactericidal, Fungicidal, Mycobactericidal and
Sporicidal Potencies of Liquid Chemical Germicides
Standard Test Method for Length Change Calibration of
Thermomechanical Analyzers
Standard Practice for Dosimetry for a Self-Contained
E 2122
E 2123
E 2124
E 2125
E 2134
E 2137
F 2051
F 2083
F 2085
E 2140
E 647
F 2076
F 2080
F 2084
F 2086
F 2087
F 2094
F 2099
F 2100
F 2101
F 2102
Dry-Storage Gamma-Ray Irradiator
Standard Guide for Conducting In-situ Field Bioassays
With Marine, Estuarine, and Freshwater Bivalves
Standard Practice for the Transmittal of Evidence in
Sexual Assault Investigation
Standard Practice for the Specification for Equipment
and Supplies in Sexual Assault Investigations
Standard Guide for Microcrystal Testing in the Forensic
Analysis of Phencyclidine and Its Analogues
Standard Test Method for Evaluating the TensileAdhesion Performance of an Exterior Insulation and
Finish System (EIFS)
Standard Guide for Estimating Monetary Costs and
Liabilities for Environmental Matters
Standard Specification for Implantable Saline Filled
Breast Prosthesis
Standard Specification for Total Knee Prosthesis
Standard Consumer Safety Specification for Portable
Bed Rails
Standard Test Method for Water Penetration of Metal
Roof Panel Systems by Static Water Pressure Head
Standard Test Method for Measurement of Fatigue
Crack Growth Rates
Standard Practice for Communicating an EMS Patient
Report to Receiving Medical Facilities
Standard Specification Cold-Expansion Fittings With
Metal Compression-Sleeves for Cross-Linked
Polyethylene (PEX) Pipe
Standard Guide for Collecting Containment Boom
Performance Data in Controlled Environments
Standard Test Method for Pass Through Flux of Circular
Magnetic Sputtering Targets, Method 2
Standard Specification for Packing, Fiberglass, Braided,
Rope, and Wick
Standard Specification for Silicon Nitride Bearing Balls
Standard Guide for Use of Universal Transverse
Mercator (UTM) Grids When Preparing and Using a
Field Map for Land Search
Standard Specification for Performance of Materials
Used in Medical Face Masks
Standard Test Method for Evaluating the Bacterial
Filtration Efficiency (BFE) of Medical Face Mask
Materials, Using a Biological Aerosol of
Staphylococcus aureus
Standard Guide for Evaluating the Extent of Oxidation
in Ultra-High-Molecular-Weight Polyethylene
A 278/A 278M
F 2103
F 2058
B 912
F 1219
A 883/A 883M
A 937/A 937M
A 985
B 138/B 138M
B 21/B 21M
B 918
B 917/B 917M
C 1356
C 1499
C 1502
C 1504
C 1505
C 1506
Fabricated Forms Intended for Surgical Implants
Standard Specification for Gray Iron Castings for
Pressure-Containing Parts for Temperatures Up to 650°
F (350°C)
Standard Guide for Characterization and Testing of
Chitosan Salts as Starting Materials Intended for Use in
Biomedical and Tissue-Engineered Medical Product
Application
Standard Specification for Cautionary Labeling for
Candles Burned in a Home
Standard Specification for Passivation of Stainless
Steels Using Electropolishing
Standard Guide for Training the Emergency Medical
Technician (Basic) to Perform Patient Initial and
Detailed Assessment
Standard Test Method for Ferrimagnetic Resonance
Linewidth and Gyromagnetic Ratio of Nonmetallic
Magnetic Materials
Standard Test Method for Determining Interlaminar
Resistance of Insulating Coatings Using Two Adjacent
Test Surfaces
Standard Specification for Steel Investment Castings
General Requirements, for Pressure-Containing Parts
Standard Specification for Manganese Bronze Rod, Bar,
and Shapes
Standard Specification for Naval Brass Rod, Bar, and
Shapes
Standard Practice for Heat Treatment of Wrought
Aluminum Alloys
Standard Practice for Heat Treatment of AluminumAlloy Castings from All Processes
Standard Test Method for Quantitative Determination of
Phases in Portland Cement Clinker by Microscopical
Point-Count Procedure
Standard Test Method for Monotonic Equibiaxial
Flexural Strength of Advanced Ceramics at Ambient
Temperature
Standard Test Method for Determination of Total
Chlorine and Fluorine in Uranium Dioxide and
Gadolinium Oxide
Standard Specification for Manufacture of Precast
Reinforced Concrete Three-Sided Structures for
Culverts, Storm Drains, and Sewers
Standard Test Method for Determination of Breaking
Strength of Ceramic Tiles by Three-Point Loading
Standard Test Method for Water Retention of Hydraulic
C 1507
C 1509
G 169
B 169/B 169M
C 1508
C 1510
D 3890
D 412
D 4231
D 6668
B 196/B 196M
B 453/B 453M
C 1331
C 1332
F 2112
F 2120
D 6688
E 2136
E 2148
E 2151
F 2028
Cement-Based Mortars and Plasters
Standard Test Method for Radiochemical Determination
of Strontium-90 in Soil
Standard Specification for Beaded Process Glass Pipe
and Fittings
Guide for Application of Basic Statistical Methods fo
Weathering Test
Standard Specification for Aluminum Bronze Sheet,
Strip, and Rolled Bar
Standard Test Method for Determination of Bromine
and Chlorine in UF&inf6; and Uranyl Nitrate by X-Ray
Fluorescence (XRF) Spectroscopy
Standard Test Method for Color and Color Difference of
Whitewares by Abriged Spectrophotometry
Standard Test Method for Number of Strokes to Prime a
Mechanical Pump Dispenser
Standard Test Methods for Vulcanized Rubber and
Thermoplastic Elastomers - Tension
Standard Practice for Evaluation of Launderable Woven
Dress Shirts and Sports Shirts
Test Method for Discrimination Between Flammability
Ratings of F = 0 and F = 1
Standard Specification for Copper-Beryllium Alloy Rod
and Bar
Standard Specification for Copper-Zinc-Lead Alloy
(Leaded-Brass) Rod, Bar, and Shapes
Standard Test Method for Measuring Ultrasonic
Velocity in Advanced Ceramics with Broadband PulseEcho Cross-Correlation Method
Standard Test Method for Measurement of Ultrasonic
Attenuation Coefficients of Advanced Ceramics by
Pulse-Echo Contact Technique
Standard Terminology for Membrane Switches
Standard Practice for Testing Treestand Load Capacity
Standard Test Method for Relative Resistance of Printed
Matter to Liquid Chemicals by a Sandwich Method
Standard Guide for Specifying and Evaluating
Performance of Single Family Attached and Detached
Dwellings - Durability
Standard Guide for Using Documents Related to
Metalworking or Metal Removal Fluid Health and
Safety
Standard Terminology of Guides for Specifying and
Evaluating Performance of Single Family Attached and
Detached Dwellings
Standard Test Methods for the Dynamic Evaluation of
F 2095
F 2096
F 2109
F 2111
F 2113
F 2121
F 2122
F 2123
F 2124
F 2125
F 2126
F 2127
F 2128
PS 128
A 1010/A 1010M
A 1018/A 1018M
D 4336
D 6056
D 6059
D 6426
Glenoid Loosening or Disassociation
Standard Test Methods for Pressure Decay Leak Test for
Nonporous Flexible Packages With and Without
Restraining Plates
Standard Test Method for Detecting Gross Leaks in
Porous Medical Packaging by Internal Pressurization
(Bubble Test)
Standard Test Method to Determine Color Change and
Staining Caused by Aircraft Maintenance Chemicals
upon Aircraft Cabin Interior Hard Surfaces
Standard Practice for Measuring Intergranular Attack or
End Grain Pitting on Metals Caused by Aircraft
Chemical Processes
Standard Guide for Analysis and Reporting the Impurity
Content and Grade of High Purity Metallic Sputtering
Targets for Electronic Thin Film Applications
Standard Practice for Treestand Labels
Standard Practice for Treestand Safety Devices
Standard Practice for Treestand Instructions
Standard Practice for Testing Ladder Treestand, Tripod
Treestand and Climbing Stick Load Capacity
Standard Test Method for Treestand Static Stability
Standard Test Method for Treestand Static Load
Capacity
Standard Test Method for Treestand Adherence
Standard Test Method for Treestand Repetitive Loading
Capability
Provisional Standard Specification for Pool Alarms
Standard Specification for Higher-Strength Martensitic
Stainless Steel Plate, Sheet, and Strip
Standard Specification for Steel, Sheet and Strip, HeavyThickness Coils, Hot-Rolled, Carbon, Structural, HighStrength Low-Alloy, Columbium or Vanadium, and
High-Strength Low-Alloy with Improved Formability
Standard Test Methods for Determination of the Output
Per Stroke of a Mechanical Pump Dispenser
Standard Test Method for Determining Concentration of
Airborne Single-Crystal Ceramic Whiskers in the
Workplace Environment by Transmission Electron
Microscopy
Standard Test Method for Determining Concentration of
Airborne Single-Crystal Ceramic Whiskers in the
Workplace Environment by Scanning Electron
Microscopy
Standard Test Method for Determining Filterability of
Distillate Fuel Oils
D 6571
D 6588
D 6598
D 6611
D 6612
D 6666
D 6673
D 6674
D 6613
D 6616
D 6641/D 6641M
D 6663
D 6664
D 6665
D 6669
D 6672
D 6681
D 6682
D 6683
D 6684
Standard Test Method for Determination of
Compression Resistance and Recovery Properties of
Highloft Nonwoven Fabric Using Static Force Loading
Standard Test Method for Fatigue of Tire Cords
Standard Guide for Installing and Operating Settlement
Platforms for Monitoring Vertical Deformations
Standard Test Method for Wet and Dry Yarn-on-Yarn
Abrasion Resistance
Standard Test Method for Yarn Number and Yarn
Number Variability Using Automated Tester
Standard Guide for Evaluation of Aqueous Polymer
Quenchants
Standard Practice for Sewn Products Pattern Data
Interchange - Data Format
Standard Guide for Proficiency Test Program for Fabrics
Standard Practice for Determining the Presence of
Sizing in Nylon or Polyester Fabric
Standard Test Method for Measuring Viscosity at High
Shear Rate by Tapered Bearing Simulator Viscometer
At 100°C
Standard Test Method for Determining the Compressive
Properties of Polymer Matrix Composite Laminates
Using a Combined Loading Compression (CLC) Test
Fixture
Standard Specification for Woven and Knitted
Comforter and Accessory Products for Institutional and
Household Use
Standard Specification for Woven, Knitted and Flocked
Bedspread Products for Institutional and Household Use
Standard Practice for Evaluation of Aging Resistance of
Pre-stressed Prepainted Metal in a Boiling Water Test
Standard Practice for Selecting and Constructing
Exposure Scenarios for Assessment of Exposures to
Alkyd and Latex Interior Paints
Standard Practice for Formatting Cutting Data to Drive
Numerically Controlled Fabric Cutting Machines
Standard Test Method for Evaluation of Engine Oils in a
High Speed, Single-Cylinder Diesel Engine - Caterpillar
1P Test Procedure
Standard Test Method for Measuring the Shear Stresses
of Powders Using the Peschl Rotational Split Level
Shear Tester
Standard Test Method for Measuring Bulk Density
Values of Powders and Other Bulk Solids
Standard Specification for Materials and Manufacture of
Articulating Concrete Block (ACB) Revetment Systems
D 6695
D 6699
D 6700
D 6703
D 6685
D 6689
D 6690
D 6692
D 6693
D 6694
D 6697
D 6698
D 6704
D 6705
D 6707
D 6708
D 6709
D 6710
E 2145
F 2088
D 6712
D 6713
Standard Practice for Xenon-Arc Exposures of Paint and
Related Coatings
Standard Practice for Sampling Liquids Using Bailers
Standard Practice for Use of Scrap Tire-Derived Fuel
Standard Test Method for Automated Heithaus
Titrimetry
Standard Guide for the Selection of Test Methods for
Fabrics Used for Fabric Formed Concrete (FFC)
Standard Guide for Optimizing, Controlling and
Reporting Test Method Uncertainties from Multiple
Workstations in the Same Laboratory Organization
Standard Specification for Joint and Crack Sealants, Hot
Applied, for Concrete and Asphalt Pavements
Standard Test Method for Determining the
Biodegradability of Radiolabeled Polymeric Plastic
Materials in Seawater
Standard Test Method for Determining Tensile
Properties of Nonreinforced Polyethylene and
Nonreinforced Flexible Polypropylene Geomembranes
Standard Specification for Liquid-Applied Silicone
Coating Used in Spray Polyurethane Foam Roofing
Standard Test Method for Determination for Chemical
Oxygen Demand (Manganese III
Standard Test Method for On-Line Measurement of
Turbidity Below 5 NTU in Water
Standard Test Method for Determining the Workability
of Asphalt Cold Mix Patching Material
Standard Guide for the Repair and Recoat of Sprayed
Polyurethane Foam Roofing Systems
Standard Specification for Circular-Knit Geotextile for
Use in Subsurface Drainage Applications
Standard Practice for Statistical Assessment and
Improvement of the Expected Agreement Between Two
Test Methods that Purport to Measure the Same
Property of a Material
Standard Test Method for Evaluation of Automotive
Engine Oils in the Sequence VIII Spark-Ignition Engine
(CLR Oil Test Engine)
Standard Guide for Evaluation of Hydrocarbon-Based
Quench Oil
Standard Practice for Modeling in Health Informatics
Standard Consumer Safety Specification for Infant
Swings
Standard Specification for Ultra-High-MolecularWeight Polyethylene (UHMW-PE) Solid Plastic Shapes
Standard Specification for Extruded and Compression
D 6721
E 1746
E 1830
E 1952
E 2036
E 2037
E 2104
E 2141
E 2142
E 2146
E 2149
F 2091
F 2092
F 2093
E 2150
E 2152
E 2153
E 2156
E 2157
Molded Shapes Made from Poly(Vinylidene Fluoride)
(PVDF)
Standard Test Method for Determination of Chlorine in
Coal by Oxidative Hydrolysis Microcoulometry
Standard Test Method for Sampling and Analysis of
Liquid Chlorine for Gaseous Impurities
Standard Test Methods for Determining Mechanical
Integrity of Photovoltaic Modules
Standard Test Method for Thermal Conductivity and
Thermal Diffusivity by Modulated Temperature
Differential Scanning Calorimetry
Standard Test Method for Nitrogen Trichloride in
Liquid Chlorine by High Performance Liquid
Chromatography (HPLC)
Standard Test Method for Bromine Chloride in Liquid
Chlorine by High Performance Liquid Chromatography
(HPLC)
Standard Practice for Radiographic Examination of
Advanced Aero and Turbine Materials and Components
Standard Test Methods for Assessing the Durability of
Absorptive Electrochromic Coatings on Sealed
Insulating Glass Units
Standard Test Methods for Rating and Classifying
Inclusions in Steel Using the Scanning Electron
Microscope
Standard Guide for Detection of Nucleic Acid
Sequences of the Human Immunodeficiency Virus HIV1 by the Polymerase Chain Reaction Technique
Standard Test Method for Determining the
Antimicrobial Activity of Immobilized Antimicrobial
Agents Under Dynamic Contact Conditions
Standard Specification for Acetabular Prostheses
Standard Specification for Convection Oven Gas or
Electric
Standard Test Method for Performance of Rack Ovens
Standard Classification for Life-Cycle Environmental
Work Elements - Environmental Cost Element Structure
Standard Practice for Computing the Colors of
Fluorescent Objects from Bispectral Photometric Data
Standard Practice for Obtaining Bispectral Photometric
Data for Evaluation of Fluorescent Color
Standard Guide for Evaluating Economic Performance
of Alternative Designs, Systems, and Materials in
Compliance with Performance Standard Guides for
Single-Family Attached and Detached Dwellings
Standard Test Method for Measuring Pavement
E 2158
E 2159
E 2169
E 2170
F 2075
F 2090
F 2097
F 2108
F 2115
F 2138
F 2140
F 2098
F 2105
F 2106
F 2107
F 2117
F 2118
F 2119
F 2129
Macrotexture Properties Using the Circular Track Meter
Standard Specification for Dedicated Short Range
Communication (DSRC) Physical Layer Using
Microwave in the 902 to 928 MHz Band
Standard Guide for Selection, Assignment, and
Monitoring of Persons To Be Utilized as
Assessors/Auditors or Technical Experts
Standard Practice for Selecting Antimicrobial Pesticides
for Use in Water-Miscible Metalworking Fluids
Standard Test Method for Determining Anaerobic
Biodegradation Potential of Organic Chemicals Under
Methanogenic Conditions
Standard Specification for Engineered Wood Fiber for
Use as a Playground Safety Surface Under and Around
Playground Equipment
Specification for Window Fall Prevention Devices With
Emergency Escape (Egress) Release Mechanisms
Standard Guide for Design and Evaluation of Primary
Packaging for Medical Products
Standard Practice for Inspection of Transparent Parts by
Prism
Standard Specification for Motorized Treadmills
Standard Specification for Excess Flow Valves for
Natural Gas Service
Standard Test Method for Performance of Hot Food
Holding Cabinets
Standard Specification for Stainless Steel Clamps for
Securing SDR9 Cross-linked Polyethylene (PEX)
Tubing to Metal Insert Fittings
Standard Test Method for Measuring Air Performance
Characteristics of Vacuum Cleaner Motor/Fan Systems
Standard Test Methods for Evaluating Design and
Performance Characteristics of Motorized Treadmills
Standard Guide for Construction and Maintenance of
Skinned Areas on Sports Fields
Standard Test Method for Vertical Rebound
Characteristics of Sports Surface/Ball Systems;
Acoustical Measurement
Test Method for Constant Amplitude of Force
Controlled Fatigue Testing of Acrylic Bone Cement
Materials
Standard Test Method for Evaluation of MR Image
Artifacts from Passive Implants
Standard Test Method for Conducting Cyclic
Potentiodynamic Polarization Measurements to
Determine the Corrosion Susceptibility of Small Implant
F 2130
F 2132
F 2133
F 2135
F 2141
F 2136
F 2139
G 170
PS 125
PS 129
PS 131
PS 132
C 1496
E 2182
E 2183
D 6762
E 2184
E 2185
Devices
Standard Test Method for Measuring Repellency,
Retention, and Penetration of Liquid Pesticide
Formulation Through Protective Clothing Materials
Standard Specification for Puncture Resistance of
Materials Used in Containers for Discarded Medical
Needles and Other Sharps
Standard Test Methods for Determining Effects of Large
Hydrocarbon Pool Fires on Insulated Marine Bulkheads
and Decks, Constructed of Steel
Standard Specification for Molded Drain, Waste, and
Vent (DWV) Short-Pattern Plastic Fittings
Standard Test Method for Performance of Hot Deli
Cases
Standard Test Method for Notched, Constant LigamentStress (NCLS) Test to Determine Slow-Crack-Growth
Resistance of HDPE Resins or HDPE Corrugated Pipe
Standard Test Method for Measuring Nitrogen
Concentration in Silicon Substrates by Secondary Ion
Mass Spectrometry
Standard Guide for Evaluating and Qualifying Oilfield
and Refinery Corrosion Inhibitors in the Laboratory
Provisional Standard Consumer Safety Performance
Specification for Diaper Changing Tables for
Commercial Use
Standard Provisional Test Method for Measurement of
Permeability of Bituminous Paving Mixtures Using a
Flexible Wall Permeameter
Standard Provisional Test Method for Bulk Specific
Gravity and Density of Compacted Bituminous Mixtures
Using Automatic Vacuum Sealing Method
Standard Provisional Test Method for Maximum
Specific Gravity and Density of Bituminous Paving
Mixtures Using Automatic Vacuum Sealing Method
Standard Guide for Assessment and Maintenance of
Exterior Dimension Stone Masonry Walls and Facades
Standard Specification for Clinical XML DTDs in
Healthcare
Standard Guide for XML DTD Design, Architecture and
Implementation
Standard Test Method for Determining the Hiding
Power of Paint by Visual Evaluation of Spray Applied
Coatings
Standard Specification for Healthcare Document
Formats
Standard Specification for Transferring Digital Voice
F 2151
F 2155
F 2156
C 1519
D 6747
D 6770
E 2160
E 651/E651M
F 2159
D 6714
D 6716
E 2164
F 2142
D 6715
E 2162
E 2163
F 2143
F 2144
F 2147
F 2148
Data Between Independent Digital Dictation Systems
and Workstations
Standard Practice for Assessment of White Blood Cell
Morphology After Contact with Materials
Standard Specification for Performance of Hasps and
Other Attachment Devices for Padlocks or Seals
Standard Test Method for Measuring Optical Distortion
in Transparent Parts Using Grid Line Slope
Standard Practice for Evaluating Durability of Building
Construction Sealants by Laboratory Accelerated
Weathering Procedures
Standard Guide for Selection of Techniques for
Electrical Detection of Potential Leak Paths in
Geomembrane
Standard Test Method for Abrasion Resistance of
Textile Webbing (Hex Bar Method)
Standard Test Method for Heat of Reaction of
Thermally Reactive Materials by Differential Scanning
Calorimetry
Standard Practice for Evaluating Capabilities of
Agencies Involved in System Analysis and Compliance
Assurance for Ma
Standard Specification for Plastic Insert Fittings
Utilizing a Copper Crimp Ring for SDR9 Cross-linked
Polyethylene (PEX) Tubing
Test Method for Chromic Oxide in Ashed Wet Blue
(Perchloric Acid Oxidation)
Test Method for Total Ash in Wet Blue
Test Method for Directional Difference Test
Test Method for Performance of Drawer Warmers
Practice for Sampling and Preparation of Salt Preserved
(Cured) Hides and Skins for Chemical and Physical
Tests
Guide for Minimum Continuing Education of
Individuals Involved in Psychophysiological Detection
of Deception (PDD) Testing of Sex Offenders
Guide for Minimum Training Requirements for
Examiners Conducting Psychophysiological Detection
of Deception (PDD) Testing of Sex Offenders in
Treatment, Probation or Other Similar Programs
Test Method for Performance of Refrigerated Buffet and
Preparation Tables
Test Method for Performance of Large Open Vat Fryers
Practice for Guinea Pig: Split Adjuvant and Closed
Patch Testing for Contact Allergens
Practice for Evaluation of Delayed Contact
F 2150
D 6746
F 2146
F 2167
PS 130
A 985
C 1450/C 1450M
C 1509
RP 7G
Spec 10A
Spec 11AX
Std 617
A 234/A 234M
A 240/A 240M
A 249/A 249M
A 270
A 276
A 291
A 307
Hypersensitivity Using the Murine Local Lymph Node
Assay (LLNA)
Standard Guide for Characterization and Testing of
Biomaterial Scaffolds Used in Tissue-Engineered
Medical Products
Standard Test Method for Raw Rubber or Unvulcanized
Compounds - Determination of Tensile Green Strength
Specification for Wrought Titanium-3Aluminum2.5Vanadium Alloy Seamless Tubing for Surgical
Implant Applications (UNS R56320)
Consumer Safety Specification for Infant Bouncer Seats
Provisional Consumer Safety Specification for NonPowered Scooters
Standard Specification for Steel Investment Castings
General Requirements, for Pressure-Containing Parts
Standard Specification for Non-Asbestos Fiber-Cement
Storm Drain Pipe
Standard Specification for Beaded Process Glass Pipe
and Fittings
Recommended Practice for Drill Stem Design and
Operating Limits
Specification for Cements and Materials for Well
Cementing
Specification for Subsurface Sucker Rod Pumps and
Fittings
Axial Centrifugal Compressors and ExpanderCompressors for Petroleum, Chemical and Gas
Industries Service
Standard Specification for Piping Fittings of Wrought
Carbon Steel and Alloy Steel for Moderate and High
Temperature Service
Standard Specification for Chromium and ChromiumNickel Stainless Steel Plate, Sheet, and Strip for
Pressure Vessels and for General Applications
Standard Specification for Welded Austenitic Steel
Boiler, Superheater, Heat-Exchanger, and Condenser
Tubes
Standard Specification for Seamless and Welded
Austenitic Stainless Steel Sanitary Tubing
Standard Specification for Stainless Steel Bars and
Shapes
Standard Specification for Steel Forgings, Carbon and
Alloy, for Pinions, Gears and Shafts for Reduction
Gears
Specification for Carbon Steel Bolts and Studs, 60 000
PSI Tensile Strength
A 308
A 31
A 320/A 320M
A 325
A 325M
A 394
A 449
A 489
A 563
A 350/A 350M
A 354
A 369/A 369M
A 403/A 403M
A 420/A 420M
A 453/A 453M
A 490
A 490M
A 502
A 563M
A 574
C 1527
C 198
D 6477
E 2199
Standard Specification for Steel Sheet, Terne (Lead-Tin
Alloy) Coated by the Hot-Dip Process
Specification for Steel Rivets and Bars for Rivets,
Pressure Vessels
Standard Specification for Alloy/Steel Bolting Materials
for Low-Temperature Service
Standard Specification for Structural Bolts, Steel, Heat
Treated, 120/105 ksi Minimum Tensile Strength
Specification for High-Strength Bolts for Structural
Steel Joints [Metric]
Specification for Steel Transmission Tower Bolts, ZincCoated and Bare
Specification for Quenched-and Tempered Steel Bolts
and Studs
Specification for Carbon Steel Lifting Eyes
Carbon and Alloy Steel Nuts
Standard Specification for Carbon and Low-Alloy Steel
Forgings, Requiring Notch Toughness Testing for
Piping Components
Standard Specification for Quenched and Tempered
Alloy Steel Bolts, Studs, and Other Externally Threaded
Fasteners
Standard Specification for Carbon and Ferritic Alloy
Steel Forged and Bored Pipe for High-Temperature
Service
Standard Specification for Wrought Austenitic Stainless
Steel Piping Fittings
Standard Specification for Piping Fittings of Wrought
Carbon Steel and Alloy Steel for Low-Temperature
Service
Standard Specification for High-Temperature Bolting
Materials, with Expansion Coefficients Comparable to
Austenitic Stainless Steels
Standard Specification for Structural Bolts, Alloy Steel,
Heat Treated, 150 ksi Minimum Tensile Strength
Specification for High-Strength Steel Bolts, Classes 10.9
and 10.9.3, for Structural Steel Joints [Metric]
Steel Structural Rivets
Standard Specification for Carbon and Alloy Steel Nuts
[Metric]
Specification for Alloy Steel Socket-Head Cap Screws
Standard Specification for Travertine Dimension Stone
Standard Test Method for Cold Bonding Strength of
Refractory Mortar
Standard Terminology Relating to Tire Cord and Fabrics
Standard Specification for Encarsia formosa Gahan
D 6784
D 6796
D 6800
D 6803
D 6806
E 2197
E 2202
F 2183
F 2187
F 2188
B 395/B 395M
E 2219
E 2221
F 2194
C 1524
C 1525
C 1529
C 1535
(Hymenoptera:Aphelinidae)
Standard Test Method for Elemental, Oxidized, ParticleBound and Total Mercury in Flue Gas Generated from
Coal-Fired Stationary Sources (Ontario Hydro Method)
Standard Practice for Production of Coal, Coke and Coal
Combustion Samples for Interlaboratory Studies
Standard Practice for Preparation of Water Samples
Using Reductive Precipitation Preconcentration
Technique for ICP-MS Analysis of Trace Metals
Standard Practice for Testing and Sampling of Volatile
Organic Compounds (Including Carbonyl Compounds)
Emitted from Paint Using Small Environmental
Chambers
Standard Practice for Analysis of Halogenated Organic
Solvents and Their Admixtures by Gas Chromatography
Standard Quantitative Disk Carrier Test Method for
Determining the Bactericidal, Virucidal, Fungicidal,
Mycobactericidal and Sporicidal Activities of Liquid
Chemical Germicides
Standard Practice for Measurement of EquipmentGenerated Continuous Noise for Assessment of Health
Hazards
Standard Test Method for Small Punch Testing of UltraHigh Molecular Weight Polyethylene Used in Surgical
Implants
Standard Test Method for Determining the Effect of
Random Frequency Vibration on a Membrane Switch or
Membrane Switch Assembly
Standard Test Method for Determining the Effect of
Variable Frequency Vibration on a Membrane Switch or
Membrane Switch Assembly
Standard Specification for U-Bend Seamless Copper and
Copper Alloy Heat Exchanger and Condenser Tubes
Standard Practice for Valuation and Management of
Moveable, Durable Property
Standard Practice for Administrative Control of Property
Standard Consumer Safety Specification for Bassinets
and Cradles
Standard Test Method for Water-Extractable Chloride in
Aggregate (Soxhlet Method)
Standard Test Method for Determination of Thermal
Shock Resistance for Advanced Ceramics by Water
Quenching
Standard Specification for Quicklime, Hydrated Lime,
and Limestone for Environmental Uses
Standard Practice for Application of Exterior Insulation
D 6801
D 6808
E 2196
E 2198
E 2200
E 2220
F 1961
B 150/B 150M
API S1
F 1717
F 1730
F 1739
F 1669M
F 1673
F 1692
F 1716
F 1735
F 1740
F 1749
F 1752
and Finish Systems Class PI
Standard Test Method for Measuring Maximum
Spontaneous Heating Temperature of Art Materials
Standard Practice for Competency Requirements of
Reference Material Producers for Water Analysis
Standard Test Method for Quantification of a
Pseudomonas aeruginosa Biofilm Grown with Shear and
Continuous Flow Using a Rotating Disk Reactor
Standard Specification for Phytoseiulus persimilis
Athias-Henriot (Acarina:Phytoseiidae)
Standard Specification for Information Included with
Packaging of Multi-Cellular Biological Control
Organisms
Standard Practice for Establishing the Full Valuation of
the Loss/Overage Population Identified During the
Inventory of Moveable, Durable Property
Standard Specification for Metal Mechanical Cold Flare
Compression Fittings with Disc Spring for Crosslinked
Polyethylene (PEX) Tubing
Standard Specification for Aluminum Bronze Rod, Bar,
and Shapes
Organization and Precedures for Standardization of
Oilfield Equipment and Materials
Standard Test Methods for Spinal Implant Constructs in
a Vertebrectomy Model
Standard Guide for Throwing a Water Rescue Throwbag
Standard Guide for Performance of a Water Rescuer Level l
Standard Specification for Insulation Monitors for
Shipboard Electrical Systems [Metric]
Standard Specification for Polyvinylidene Fluoride
(PVDF) Corrosive Waste Drainage Systems
Standard Test Method for Life Evaluation of a TurbinePowered Nozzle for Household Central Vacuum
Cleaning Systems
Standard Guide for Transition and Performance of
Marine Software Systems Maintenance
Standard Specification for Poly (Vinyl Chloride)(PVC)
Profile Strip for PVC Liners for Rehabilitation of
Existing Man-Entry Sewers and Conduits
Standard Guide for Inspection of Nylon, Polyester, or
Nylon/Polyester Blend, or Both Kernmantle Rope
Standard Specification for Fitness Equipment and
Fitness Facility Safety Signage and Labels
Standard Test Method for Archery Bow Component Cord Material
F 1753
F 1755M
F 1756
F 1757
F 1764
F 1768
F 1789
F 1835
F 1837M
F 1807
F 1813
F 1836M
F 1839
F 1852
F 1854
F 1865
F 1935
F 1940
F 1941
F 21
F 355
Standard Specification for Classification and Marking of
Single-Lens Scopes for Use with Archery Bows
Standard Specification for Solid State Bargraph Meters
for Shipboard Use [Metric]
Standard Guide for Implementation of a Fleet
Management System Network
Standard Guide for Digital Communication Protocols
for Computerized Systems
Standard Guide for Selection of Hardline
Communication Systems for Confined-Space Rescue
Standard Guide for Using Whistle Signals During Rope
Rescue Operations
Standard Terminology for F16 Mechanical Fasteners
Standard Guide for Cable Splicing Installations
Standard Specification for Heat-Shrink Cable Entry
Seals (Metric)
Standard Specification for Metal Insert Fittings Utilizing
a Copper Crimp Ring for SDR9 Cross-linked
Polyethylene (PEX) Tubing
Standard Specification for Wrought Titanium - 12
Molybdenum - 6 Zirconium - 2 Iron Alloy for Surgical
Implant (UNS R58120)
Standard Specification for Stuffing Tubes, Nylon, and
Packing Assemblies (Metric)
Standard Specification for Rigid Polyurethane Foam for
Use as a Standard Material for Testing Orthopaedic
Devices and Instruments
Specification for "Twist Off" Type Tension Control
Structural Bolt/Nut/Washer Assemblies, Steel, Heat
Treated, 120/105 ksi Minimum Tensile Strength
Standard Test Method for Stereological Evaluation of
Porous Coatings on Medical Implants
Standard Specification for Mechanical Cold Expansion
Insert Fitting With Compression Sleeve for Cross-linked
Polyethylene (PEX) Tubing
Standard Test Method for Measuring the Headroom of a
Backpacking or Mountaineering Tent
Standard Test Method for Process Control Verification
to Prevent Hydrogen Embrittlement in Plated or Coated
Fasteners
Specification for Electrodeposited Coatings on Threaded
Fasteners (Unified Inch Screw Threads (UN/UNR))
Standard Test Method for Hydrophobic Surface Films
by the Atomizer Test
Standard Test Method for Shock-Absorbing Properties
of Playing Surface Systems and Materials
F 358
F 412
F 428
F 360
F 386
F 387
F 406
F 410
F 418
F 432
F 436
F 436M
F 467
F 467M
F 468
F 468M
F 471
F 476
F 539
F 541
F 547
F 552
F 477
F 483
F 484
Standard Test Method for Wavelength of Peak
Photoluminescence and the Corresponding Composition
of Gallium Arsenide Phosphide Wafers
Standard Terminology Relating to Plastic Piping
Systems
Standard Test Method for Intensity of Scratches on
Aerospace Glass Enclosures
Standard Practice for Image Evaluation of Electrostatic
Business Copies
Standard Test Method for Thickness of Resilient
Flooring Materials Having Flat Surfaces
Standard Test Method for Measuring Thickness of
Resilient Floor Covering With Foam Layer
Standard Consumer Safety Specification for Non-FullSize Baby Cribs/Play Yards
Standard Test Method for Wear Layer Thickness of
Resilient Floor Coverings by Optical Measurement
Standard Practice for Preparation of Samples of the
Constant Composition Region of Epitaxial Gallium
Arsenide Phosphide for Hall Effect Measuremen
Standard Specification for Roof and Rock Bolts and
Accessories
Standard Specification for Hardened Steel Washers
Specification for Hardened Steel Washers [Metric]
Standard Specification for Nonferrous Nuts for General
Use
Standard Specification for Nonferrous Nuts for General
Use [Metric]
Standard Specification for Nonferrous Bolts, Hex Cap
Screws, and Studs for General Use
Standard Specification for Nonferrous Bolts, Hex Cap
Screws, and Studs for General Use [Metric]
Standard Terminology Relating to Combination Locks
Standard Test Methods for Security of Swinging Door
Assemblies
Standard Practice for Fitting Athletic Footwear
Specification for Alloy Steel Eyebolts
Standard Terminology of Nails for Use with Wood and
Wood-Base Materials
Standard Terminology Relating to Chain Link Fencing
Standard Specification for Elastomeric Seals (Gaskets)
for Joining Plastic Pipe
Standard Test Method for Total Immersion Corrosion
Test for Aircraft Maintenance Chemicals
Standard Test Method for Stress Crazing of Acrylic
Plastics in Contact with Liquid or Semi-Liquid
F 496
F 505
F 562
F 564
F 568M
F 592
F 593
F 594
F 568
F 606
F 606M
F 619
F 623
F 621
F 629
F 649
F 660
F 680
F 711
F 715
F 716
F 719
F 720
Compounds
Standard Specification for In-Service Care of Insulating
Gloves and Sleeves
Standard Practice for the Comparative Evaluation of the
Imaging Properties of Liquid Electrostatic Toners
Standard Specification for Wrought 35Cobalt-35Nickel20Chromium-10Molybdenum Alloy for Surgical
Implant Applications (UNS R30035)
Standard Specification and Test Methods for Metallic
Bone Staples
Carbon and Alloy Steel Externally Threaded Metric
Fasteners
Standard Terminology of Collated and Cohered
Fasteners and Their Application Tools
Standard Specification for Stainless Steel Bolts, Hex
Cap Screws, and Studs
Standard Specification for Stainless Steel Nuts
Carbon and Alloy Steel Externally Threaded Metric
Fasteners
Standard Test Methods for Determining the Mechanical
Properties of Externally and Internally Threaded
Fasteners, Washers, and Rivets
Standard Test Methods for Determining the Mechanical
Properties of Externally and Internally Threaded
Fasteners, Washers, and Rivets [Metric]
Standard Practice for Extraction of Medical Plastics
Standard Performance Specification for Foley Catheter
Standard Specification for Stainless Steel Forgings for
Surgical Implants
Standard Practice for Radiography of Cast Metallic
Surgical Implants
Standard Practice for Secondary Calibration of Airborne
Particle Counter Using Comparison Procedures
Standard Practice for Comparing Particle Size in the Use
of Alternative Types of Particle Counters
Test Methods for Nails
Standard Specification for Fiberglass-Reinforced Plastic
(FRP) Rod and Tube Used in Live Line Tools
Standard Test Methods for Coated Fabrics Used for Oil
Spill Control and Storage
Standard Test Methods for Sorbent Performance of
Absorbents
Standard Practice for Testing Biomaterials in Rabbits for
Primary Skin Irritation
Standard Practice for Testing Guinea Pigs for Contact
Allergens: Guinea Pig Maximization Test
F 738M
F 75
F 750
F 757
F 788/F 788M
F 833
F 836M
F 790
F 792
F 794
F 799
F 801
F 812/F 812M
F 813
F 835
F 835M
F 837
F 837M
F 844
F 857
F 858
Standard Specification for Stainless Steel Metric Bolts,
Screws, and Studs
Standard Specification for Cobalt-28 Chromium-6
Molybdenum Alloy Castings and Casting Alloy for
Surgical Implants (UNS R30075)
Standard Practice for Evaluating Material Extracts by
Systemic Injection in the Mouse
Standard Test Method for Determining Energy
Consumption of Copier and Copier-Duplicating
Equipment1
Surface Discontinuities of Bolts, Screws, and Metric
Series
Standard Consumer Safety Performance Specification
for Carriages and Strollers
Standard Specification for Style 1 Stainless Steel Metric
Nuts
Standard Guide for Testing Materials for Aerospace
Plastic Transparent Enclosures
Standard Practice for Evaluating the Imaging
Performance of Security X-Ray Systems
Standard Specification for Poly(Vinyl Chloride) (PVC)
Profile Gravity Sewer Pipe and Fittings Based on
Controlled Inside Diameter
Standard Specification for Cobalt-28Chromium6Molybdenum Alloy Forgings for Surgical Implants
(UNS R31537, R31538, R31539)
Standard Test Method for Measuring Optical Angular
Deviation of Transparent Parts
Standard Specification for Surface Discontinuities of
Nuts, Inch and Metric Series
Standard Practice for Direct Contact Cell Culture
Evaluation of Materials for Medical Devices
Specification for Alloy Steel Socket Button and Flat
Countersunk Head Cap Screws
Specification for Alloy Steel Socket Button and Flat
Countersunk Head Cap Screws [Metric]
Standard Specification for Stainless Steel Socket Head
Cap Screws
Standard Specification for Stainless Steel Socket Head
Cap Screws [Metric]
Specification for Washers, Steel, Plain (Flat),
Unhardened for General Use
Standard Specification for Hot Water Sanitizing
Commercial Dishwashing Machines, Stationary Rack
Type
Standard Specification for Hot Water Sanitizing
F 880
F 880M
F 899
F 860
F 862
F 871M
F 877
F 879
F 879M
F 884
F 90
F 901
F 912
F 912M
F 918
F 925
F 926
F 963
G 145
G 15
F 942
Commercial Dishwashing Machines, Single Tank,
Conveyor Rack Type
Standard Specification for Stainless Steel Socket-Set
Screws
Standard Specification for Stainless Steel Socket Set
Screws [Metric]
Standard Specification for Stainless Steels for Surgical
Instruments
Standard Specification for Hot Water Sanitizing
Commercial Dishwashing Machines, Multiple Tank,
Rackless Conveyor Type
Standard Test Method for pH and Chloride-ion
Concentration of Aerospace Hydraulic Fluids
Electrodeposited Coatings on Threaded Components
[Metric]
Standard Specification for Crosslinked Polyethylene
(PEX) Plastic Hot- and Cold-Water Distribution
Systems
Standard Specification for Stainless Steel Socket Button
and Flat Countersunk Head Cap Screws
Standard Specification for Stainless Steel Socket Button
and Flat Countersunk Head Cap Screws [Metric]
Standard Test Method for Motor Life Evaluation of a
Built-in (Central Vacuum) Vacuum Cleaner
Standard Specification for Wrought Cobalt20Chromium-15Tungsten-10Nickel Alloy for Surgical
Implant Applications (UNS R30605)
Standard Specification for Aluminum Transmission
Tower Bolts and Nuts
Specification for Alloy Steel Socket Set Screws
Specification for Alloy Steel Socket Set Screws [Metric]
Standard Specification for Noncarbonated Mechanically
Refrigerated Beverage Dispenser (Visible Product)
Standard Test Method for Resistance to Chemicals of
Resilient Flooring
Standard Specification for Cautionary Labeling of
Portable Kerosine and Diesel Containers for Consumer
Use
Standard Consumer Safety Specification on Toy Safety
Standard Guide for Studying Fire Incidents in Oxygen
Systems
Standard Terminology Relating to Corrosion and
Corrosion Testing
Standard Guide for Selection of Test Methods for
Interlayer Materials for Aerospace Transparent
Enclosures
F 959
F 959M
F 974
F 976
F 995
G 128
G 140
G 144
G 156
G 21
G 29
G 62
C 1401
E 2035
F 1964
G 72
G 74
A 1003/A 1003M
F 1960
Standard Specification for Compressible-Washer-Type
Direct Tension Indicators for Use with Structural
Fasteners
Standard Specification for Compressible-Washer-Type
Direct Tension Indicators for Use With Structural
Fasteners [Metric]
Standard Practice for Determination of the Color
Response of an Electrostatic Copying System, Black and
White Output
Standard Specification for Portable Kerosine and Diesel
Containers for Consumer Use
Standard Practice for Estimating Toner Usage in Copiers
Utilizing Dry Two-Component Developer
Standard Guide for Control of Hazards and Risks in
Oxygen Enriched Systems
Standard Test Method for Determining Atmospheric
Chloride Deposition Rate by Wet Candle Method
Standard Test Method for Determination of Residual
Contamination of Materials and Components by Total
Carbon Analysis Using a High Temperature Combustion
Analyzer
Standard Practice for Selecting and Characterizing
Weathering Reference Materials Used to Monitor
Consistency of Conditions in an Exposure Test
Standard Practice for Determining Resistance of
Synthetic Polymeric Materials to Fungi
Standard Practice for Determining Algal Resistance of
Plastic Films
Standard Test Methods for Holiday Detection in
Pipeline Coatings
Standard Guide for Structural Sealant Glazing
Standard Terminology Relating to Forensic
Psychophysiology
Standard Test Method for Performance of Pressure and
Kettle Fryers
Standard Test Method for Autogenous Ignition
Temperature of Liquids and Solids in a High-Pressure
Oxygen-Enriched Environment
Standard Test Method for Ignition Sensitivity of
Materials to Gaseous Fluid Impact
Standard Specification for Steel Sheet, Carbon,
Metallic- and Nonmetallic-Coated for Cold-Formed
Framing Members
Standard Specification for Cold Expansion Fittings with
PEX Reinforcing Rings for Use with Cross-linked
Polyethylene (PEX) Tubing
F 1975
C 1421
E 2030
F 1870
F 1980
D 638
D 6464
E 2049
F 1963
F 1991
F 1941M
F 2002
C 28/C 28M
C 318/C 318M
B 171/B 171M
D 6498
D 6514
E 2072
E 2073
D 6476
D 6478
D 6479
F 2026
Standard Specification for Nonpowered Bicycle Trailers
Designed for Human Passengers
Standard Test Methods for Determination of Fracture
Toughness of Advanced Ceramics at Ambient
Temperature
Guide for Recommended Uses of Photoluminescent
(Phosphorescent) Safety Markings
Standard Guide for Selection of Fire Test Methods for
the Assessment of Uphoistered Furnishings in Detention
and Correctional Facilities
Standard Guide for Accelerated Aging of Sterile
Medical Device Packages
Standard Test Method for Tensile Properties of Plastics
Standard Specification for Expandable Foam Adhesives
for Fastening Gypsum Wallboard to Wood Framing
Standard Guide for Quantitative Evaluation of
Fragrance/Odors for Shampoos and Hair Conditioners
Standard Specification for Deep-Fat Fryers, Gas or
Electric, Open
Standard Test Method for Performance of Chinese
(Wok) Ranges
Specification for Electrodeposited Coatings on Threaded
Fasteners (Matric)
Standard Terminology Relating to Anesthesia and
Respiratory Equipment
Standard Specification for Gypsum Plasters
Standard Specification Gypsum Formboard
Standard Specification for Copper-Alloy Plate and Sheet
for Pressure Vessels, Condensers, and Heat Exchangers
Standard Guide for Household Hazardous Waste
Training Outline for Household Hazardous Waste
Collection Operations
Standard Test Method for High Temperature Universal
Oxidation Test for Turbine Oils
Standard Specification for Photoluminescent
(Phosphorescent) Safety Markings
Standard Test Method for Photopic Luminance of
Photoluminescent (Phosphorescent) Markings
Standard Test Method for Determining Dynamic Air
Permeability of Inflatable Restraint Fabrics
Standard Test Method for Determining Specific
Packability of Fabrics Used in Inflatable Restraints
Standard Test Method for Determining the Edgecomb
Resistance of Woven Fabrics Used in Inflatable
Restraints
Standard Specification for Polyetheretherketone (PEEK)
F 2050
E 1731
E 2021
E 2079
E 2082
A 463/A 463M
F 2022
F 2069
F 2087
D 6556
F 2020
A 1008/A 1008M
D 3552
C 1482
E 2126
A 1014
F 2079
A 1016/A 1016M
D 6644
D 6687
F 2096
Polymers for Surgical Implant Applications
Standard Consumer Safety Performance Specification
for Hand-Held Infant Carriers
Standard Test Method for Gravimetric Determination of
Nonvolatile Residue from Cleanroom Gloves
Standard Test Method for Hot-Surface Ignition
Temperature of Dust Layers
Standard Test Methods for Limiting Oxygen (Oxidant)
Concentration in Gases and Vapors
Guide for Descriptive Analysis of Shampoo
Performance
Standard Specification for Steel Sheet, AluminumCoated, by the Hot-Dip Process
Standard Test Method for Performance of Booster
Heaters
Standard Practice for Evaluation of Explosives Vapor
Detectors
Standard Specification for Packing, Fiberglass, Braided,
Rope, and Wick
Standard Test Method for Carbon Black - Total and
External Surface Area by Nitrogen Adsorption
Standard Practice for Design, Construction, and
Procurement of Emergency Medical Services Systems
(EMSS) Ambulances
Standard Specification for Steel, Sheet, Cold-Rolled,
Carbon, Structural, High-Strength Low-Alloy and HighStrength Low-Alloy with Improved Formability
Standard Test Method for Tensile Properties of Fiber
Reinforced Metal Matrix Composites
Standard Specification for Polyimide Flexible Cellular
Thermal and Sound Absorbing Insulation
Standard Test Methods for Cyclic (Reversed) Load Test
for Shear Resistance of Framed Walls for Buildings
Standard Specification for Precipitation-Hardening
Bolting Material (UNS N07718) for High Temperature
Service
Standard Test Method for Measuring Intrinsic Elastic
Recoil of Balloon-Expandable Stents
Standard Specification for General Requirements for
Ferritic Alloy Steel, Austenitic Alloy Steel, and
Stainless Steel Tubes
Standard Test Method for Tension Strength of SewThrough Flange Buttons
Standard Guide for Testing Printing Ink Vehicles and
Components Thereof
Standard Test Method for Detecting Gross Leaks in
F 2111
D 6710
F 2092
F 2093
F 2140
D 6571
D 6613
F 2075
F 2105
F 2141
D 6742/D 6742M
E 2147
E 2161
E 2181/E 2181M
F 2137
F 2149
F 2153
F 2161
F 2162
F 2175
Medical Packaging by Internal Pressurization (Bubble
Test)
Standard Practice for Measuring Intergranular Attack or
End Grain Pitting on Metals Caused by Aircraft
Chemical Processes
Standard Guide for Evaluation of Hydrocarbon-Based
Quench Oil
Standard Specification for Convection Oven Gas or
Electric
Standard Test Method for Performance of Rack Ovens
Standard Test Method for Performance of Hot Food
Holding Cabinets
Standard Test Method for Determination of
Compression Resistance and Recovery Properties of
Highloft Nonwoven Fabric Using Static Force Loading
Standard Practice for Determining the Presence of
Sizing in Nylon or Polyester Fabric
Standard Specification for Engineered Wood Fiber for
Use as a Playground Safety Surface Under and Around
Playground Equipment
Standard Test Method for Measuring Air Performance
Characteristics of Vacuum Cleaner Motor/Fan Systems
Standard Test Method for Performance of Hot Deli
Cases
Practice for Filled-Hole Tension and Compression
Testing of Polymer Matrix Composite Laminates
Specification for Audit and Disclosure Logs for Use in
Health Information Systems
Terminology Relating to Performance Validation in
Thermal Analysis
Specification for Compacted Mineral-Insulated, MetalSheathed, Noble Metal Thermocouples and
Thermocouple Cable
Practice for Measuring the Dynamic Characteristics of
Amusement Rides and Devices
Test Method for Automated Analyses of Cells - the
Electrical Sensing Zone Method of Enumerating and
Sizing Single Cell Suspensions
Test Method for Measurement of Backpack Capacity
Guide for Instrument and Precision Bearing Lubricants Part 1 Oils
Standard Specification for Bearing, Roller, Needle:
Drawn Outer Ring, Full Complement, Without Inner
Ring, Open and Closed End, Standard Type
Standard Specification for Portable Escape Ladder for
Residential Use
D 6743
D 6777
F 2163
D 6785
D 6748
F 2171
C 1521
C 1522
C 1523
D 6761
E 2154
E 2192
F 2174
D 6759
D 6765
E 2189
E 2190
F 2169
D 6724
E 2193
Standard Test Method for Thermal Stability of Organic
Heat Transfer Fluids
Standard Test Method for Relative Rigidity of
Poly(Vinyl Chloride)(PVC) Siding
Standard Specification for Ring, Bearing, Inner: for
Needle Roller Bearing With Drawn Outer Ring
Standard Test Method for Determination of Lead in
Workplace Air Using Flame or Graphite Furnace
Atomic Absorption Spectrometry
Standard Test Method for Determination of Potential
Instability of Middle Distillate Fuels Caused by the
Presence of Phenalenes and Phenalenones (Rapid
Method by Portable Spectrophotometer)
Standard Guide for Defining the Performance of First
Aid Providers in Occupational Settings
Standard Practice for Evaluating Adhesion of Installed
Weatherproofing Sealant Joints
Standard Test Method for Extensibility After Heat
Aging of Cold Liquid-Applied Elastomeric
Waterproofing Membranes
Standard Test Method for Determining Modulus, Tear
and Adhesion Properties of Precured Elastomeric Joint
Sealants
Standard Test Method for Determination of the Total
Pore Volume of Catalysts and Catalyst Carriers
Standard Practice for Separation and Concentration of
Ignitable Liquid Residues from Fire Debris Samples by
Passive Headspace Concentration with Solid Phase
Microextraction (SPME)
Standard Guide for Planar Flaw Height Sizing by
Ultrasonics
Standard Practice for Verifying Acoustic Emission
Sensor Response
Standard Practice for Sampling Liquids Using Grab and
Discrete Depth Samplers
Standard Practice for Live Staking
Standard Test Method for Testing Resistance to Fogging
in Insulating Glass Units
Standard Specification for Insulating Glass Unit
Performance and Evaluation
Standard Specification for Resilient Stair Treads
Standard Guide for Installation of Direct Push Ground
Water Monitoring Wells
Standard Test Method for Ultraviolet Transmittance of
Monoethylene Glycol (Ultraviolet Spectrophotometric
Method)
D 6726
D 6727
D 6719
C 1517
A 1023/A 1023M
B 371/B 371M
C 1500
C 1514
D 6725
D 6758
D 6764
D 6772
D 6782
D 6783
D 6787
D 6788
D 6790
D 6809
E 2209
F 2116
F 2176
F 2178
Standard Guide for Conducting Borehole Geophysical
Logging - Electromagnetic Induction
Standard Guide for Conducting Borehole Geophysical
Logging - Neutron
Standard Guide for Standard Test Methods and Practices
for Evaluating Pile Yarn Floor Covering
Standard Test Method for Determination of Metallic
Impurities in Uranium Metal or Compounds by DC-Arc
Emission Spectroscopy
Standard Specification for Stranded Carbon Steel Wire
Ropes for General Purposes
Standard Specification for Copper-Zinc-Silicon Alloy
Rod
Standard Test Method for Nondestructive Assay of
Plutonium by Passive Neutron Multiplicity Counting
Standard Test Method for Measurement of 235U
Fraction using the Enrichment Meter Principle
Standard Practice for Direct Push Installation of
Prepacked Screen Monitoring Wells in Unconsolidated
Aquifers
Standard Test Method for Measuring Stiffness and
Apparent Modulus of Soil and Soil-Aggregate In-Place
by an Electro-Mechanical Method
Standard Guide for Collection of Water Temperature,
Dissolved-Oxygen Concentrations, Specific Electrical
Conductance, and pH Data from Open Channels
Standard Test Method for Dimensional Stability of
Sandwich Core Materials
Standard Test Methods for Standardization and
Calibration of In-Line Dry Lumber Moisture Meters
Standard Specification for Polymer Concrete Pipe
Standard Specification for Repositionable Note Pad
Standard Specification for Repositionable PressureSensitive Flags
Standard Test Method for Determining Poisson's Ratio
of Honeycomb Cores
Standard Guide for Quality Control and Quality
Assurance Procedures for Aromatic Hydrocarbons and
Related Materials
Standard Test Method for Analysis of High Manganese
Steel Using Atomic Emission Spectrometry
Standard Specification for Low Stretch and Static
Kernmantle Life Safety Rope
Standard Specification for Mechanical Couplings Used
on Polyethylene Conduit, Duct and Innerduct
Standard Test Method for Determining The Arc Rating
F 2179
F 2180
F 2182
B 351/B 351M
B 352/B 352M
C 1530
D 2970
A 574M
A 623
A 623M
A 788
B 106
B 129
A 632
A 653/A 653M
A 668/A 668M
A 687
A 688/A 688M
A 709/A 709M
Of Face Protective Products
Standard Specification for Annealed Soda-Lime-Silicate
Glass Containers That Are Produced for Use as Candle
Containers
Standard Specification for Metallic Implantable Strands
and Cables
Standard Test Method for Measurement of Radio
Frequency Induced Heating Near Passive Implants
During Magnetic Resonance Imaging
Standard Specification for Hot-Rolled and ColdFinished Zirconium and Zirconium Alloy Bars, Rod,
and Wire for Nuclear Application
Standard Specification for Zirconium and Zirconium
Alloy Sheet, Strip, and Plate for Nuclear Application
Standard Specification for Non-Asbestos Fiber-Cement
Roofing Shakes, Shingles, and Slates with Designed
Varying Profiles and Thicknesses
Standard Test Methods for Testing Tire Cords, Tire
Cord Fabrics, and Industrial Yarns Made From Glass
Filaments
Specification for Alloy Steel Socket-Head Cap Screws
[Metric]
Standard Specification for Tin Mill Products, General
Requirements
Standard Specification for Tin Mill Products, General
Requirements [Metric]
Standard Specification for Steel Forgings, General
Requirements
Standard Test Methods for Flexivity of Thermostat
Metals
Standard Specification for Cartridge Brass Cartridge
Case Cups
Standard Specification for Seamless and Welded
Austenitic Stainless Steel Tubing (Small-Diameter) for
General Service
Standard Specification for Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-iron Alloy-Coated (Galvannealed)
by the Hot-Dip Process
Standard Specification for Steel Forgings, Carbon and
Alloy, for General Industrial Use
High-Strength Nonheaded Steel Bolts and Studs
Standard Specification for Welded Austenitic Stainless
Steel Feedwater Heater Tubes
Standard Specification for Carbon and High-Strength
Low-Alloy Structural Steel Shapes, Plates, and Bars and
Quenched-and-Tempered Alloy Structural Steel P
A 803/A 803M
A 836/A 836M
A 875/A 875M
D 5847
A 882/A 882M
A 906/A 906M
B 131
B 188
B 209
A 920/A 920M
A 952/A 952M
A 960
A 961
B 101
B 163
B 209M
B 228
B 243
B 247
B 247M
B 258
Standard Specification for Welded Ferritic Stainless
Steel Feedwater Heater Tubes
Standard Specification for Titanium-Stabilized Carbon
Steel Forgings for Glass-Lined Piping and Pressure
Vessel Service
Standard Specification for Steel Sheet, Zinc-5 %
Aluminum Alloy-Coated by the Hot-Dip Process
Standard Practice for Writing Quality Control
Specifications for Standard Test Methods for Water
Analysis
Standard Specification for Filled Epoxy-Coated SevenWire Prestressing Steel Strand
Standard Specification for Grade 80 and Grade 100
Alloy Steel Chain Slings for Overhead Lifting
Standard Specification for Copper Alloy Bullet Jacket
Cups
Standard Specification for Seamless Copper Bus Pipe
and Tube
Standard Specification for Aluminum and AluminumAlloy Sheet and Plate
Standard Specification for Steel Bars, Microalloy, HotWrought, Special Quality, Mechanical Properties
Standard Specification for Forged Grade 80 and Grade
100 Steel Lifting Components and Welded Attachment
Links
Standard Specification for Common Requirements for
Wrought Steel Piping Fittings
Standard Specification for Common Requirements for
Steel Flanges, Forged Fittings, Valves, and Parts for
Piping Applications
Standard Specification for Lead-Coated Copper Sheet
and Strip for Building Construction
Standard Specification for Seamless Nickel and Nickel
Alloy Condenser and Heat-Exchanger Tubes
Standard Specification for Aluminum and AluminumAlloy Sheet and Plate [Metric]
Standard Specification for Concentric-Lay-Stranded
Copper-Clad Steel Conductors
Standard Terminology of Powder Metallurgy
Standard Specification for Aluminum and AluminumAlloy Die Forgings, Hand Forgings, and Rolled Ring
Forgings
Standard Specification for Aluminum and AluminumAlloy Die Forgings, Hand Forgings, and Rolled Ring
Forgings [Metric]
Standard Specification for Standard Nominal Diameters
B 265
B 275
B 30
B 403
B 42
B 311
B 312
B 331
B 350/B 350M
B 361
B 446
B 473
B 475
B 499
B 514
B 515
B 536
B 686
B 747
B 85
and Cross-Sectional Areas of AWG Sizes of Solid
Round Wires Used as Electrical Conductors
Standard Specification for Titanium and Titanium Alloy
Strip, Sheet, and Plate
Standard Practice for Codification of Certain Nonferrous
Metals and Alloys, Cast and Wrought
Standard Specification for Copper Alloys in Ingot Form
Standard Specification for Magnesium-Alloy Investment
Castings
Standard Specification for Seamless Copper Pipe,
Standard Sizes
Test Method for Density Determination for Powder
Metallurgy (P/M) Materials Containing Less Than Two
Percent Porosity
Standard Test Method for Green Strength for
Compacted Metal Powder Specimens
Standard Test Method for Compressibility of Metal
Powders in Uniaxial Compaction
Standard Specification for Zirconium and Zirconium
Alloy Ingots for Nuclear Application
Standard Specification for Factory-Made Wrought
Aluminum and Aluminum-Alloy Welding Fittings
Standard Specification for Nickel-ChromiumMolybdenum-Columbium Alloy (UNS N06625),
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS
N06219), and Nickel-Chromium-Molyb
Standard Specification for UNS N08020, UNS N08024,
and UNS N08026 Nickel Alloy Bar and Wire
Standard Specification for UNS N08020, UNS N08024,
and UNS N08026 Nickel Alloy Round Weaving Wire
Standard Test Method for Measurement of Coating
Thicknesses by the Magnetic Method: Nonmagnetic
Coatings on Magnetic Basis Metals
Standard Specification for Welded Nickel-IronChromium Alloy Pipe
Standard Specification for Welded UNS N08120, UNS
N08800, UNS N08810, and UNS N08811 Alloy Tubes
Standard Specification for Nickel-Iron-ChromiumSilicon Alloys (UNS N08330 and N08332) Plate, Sheet,
and Strip
Standard Specification for Aluminum Alloy Castings,
High-Strength
Standard Specification for Copper-Zirconium Alloy
Sheet and Strip
Standard Specification for Aluminum-Alloy Die
Castings
C 1032
B 537
B 539
B 557
B 557M
B 594
B 600
B 645
B 649
B 670
B 673
B 674
B 691
B 700
C 1120
C 1145
C 1180
B 726
B 770
B 773
B 786
Standard Specification for Woven Wire Plaster Base
Standard Practice for Rating of Electroplated Panels
Subjected to Atmospheric Exposure
Standard Test Methods for Measuring Resistance of
Electrical Connections (Static Contacts)
Standard Test Methods of Tension Testing Wrought and
Cast Aluminum- and Magnesium-Alloy Products
Standard Test Methods of Tension Testing Wrought and
Cast Aluminum- and Magnesium-Alloy Products
[Metric]
Standard Practice for Ultrasonic Inspection of
Aluminum-Alloy Wrought Products for Aerospace
Applications
Standard Guide for Descaling and Cleaning Titanium
and Titanium Alloy Surfaces
Standard Practice for Plane-Strain Fracture Toughness
Testing of Aluminum Alloys
Standard Specification for Ni-Fe-Cr-Mo-Cu LowCarbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N LowCarbon Alloys (UNS N08925, UNS N08031, and UNS
N08926), and Cr-Ni-Fe-N
Standard Specification for Precipitation-Hardening
Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for
High-Temperature Service
Standard Specification for UNS N08904, UNS N08925,
and UNS N08926 Welded Pipe
Standard Specification for UNS N08904, UNS N08925,
and UNS N08926 Welded Tube
Standard Specification for Iron-Nickel-ChromiumMolybdenum Alloys (UNS N08366 and UNS N08367)
Rod, Bar, and Wire
Standard Specification for Electrodeposited Coatings of
Silver for Engineering Use
Standard Test Method for Wash Test of Asbestos
Standard Terminology of Advanced Ceramics
Standard Terminology of Mortar and Grout for Unit
Masonry
Standard Specification for Nickel-ChromiumMolybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS
N06333) Welded Tube
Standard Specification for Copper-Beryllium Alloy
Sand Castings for General Applications
Standard Guide for Ultrasonic C-Scan Bond Evaluation
of Brazed or Welded Electrical Contact Assemblies
Standard Specification for 19 Wire Combination UnilayStranded Aluminum Conductors for Subsequent
B 795
B 796
B 812
B 814
B 822
B 857
B 860
B 868
C 119
C 1226
C 1227
C 1022
C 1037
C 1043
C 1088
C 11
C 110
C 1161
C 1189
C 1204
Insulation
Standard Test Method for Determining the Percentage of
Alloyed or Unalloyed Iron Contamination Present in
Powder Forged (P/F) Steel Parts
Standard Test Method for Nonmetallic Inclusion
Content of Powders Intended for Powder Forging (P/F)
Applications
Standard Test Method for Resistance to Environmental
Degradation of Electrical Pressure Connections
Involving Aluminum and Intended for Resident
Standard Specification for Nickel-Chromium-IronMolybdenum-Tungsten Alloy (UNS N06920) Plate,
Sheet, and Strip
Standard Test Method for Particle Size Distribution of
Metal Powders and Related Compounds by Light
Scattering
Standard Specification for Shaped Wire Compact
Concentric-Lay-Stranded Aluminum Conductors,
Coated-Steel Supported (ACSS/TW)
Standard Specification for Zinc Master Alloys for Use in
Hot Dip Galvanizing
Standard Practice for Contact Performance
Classification of Electrical Connection Systems
Standard Terminology Relating to Dimension Stone
Standard Test Method for Soluble Chlorides in Asbestos
Standard Specification for Precast Concrete Septic
Tanks
Standard Test Methods for Chemical and Atomic
Absorption Analysis of Uranium-Ore Concentrate
Standard Practice for Inspection of Underground Precast
Concrete Utility Structures
Standard Practice for Guarded-Hot-Plate Design Using
Circular Line-Heat Sources
Standard Specification for Thin Veneer Brick Units
Made From Clay or Shale
Standard Terminology Relating to Gypsum and Related
Building Materials and Systems
Standard Test Methods for Physical Testing of
Quicklime, Hydrated Lime, and Limestone
Standard Test Method for Flexural Strength of
Advanced Ceramics at Ambient Temperature
Standard Guide to Procedures for Calibrating Automatic
Pedestrian SNM Monitors
Standard Test Method for Uranium in the Presence of
Plutonium by Iron(II) Reduction in Phosphoric Acid
Followed by Chromium(VI) Titration
C 1205
C 1206
C 1242
C 1244
C 1266
C 1272
C 1311
C 1314
C 1289
C 1330
C 1339
C 1343
C 1346
C 1351M
C 1357
C 1360
C 1361
C 1381
C 1384
C 1396/C 1396M
C 140
Standard Test Method for The Radiochemical
Determination of Americium-241 in Soil by Alpha
Spectrometry
Standard Test Method for Plutonium by Iron
(II)/Chromium (VI) Amperometric Titration
Standard Guide for Selection, Design, and Installation of
Exterior Dimension Stone Anchors and Anchoring
Systems
Standard Test Method for Concrete Sewer Manholes by
the Negative Air Pressure (Vacuum) Test Prior to
Backfill
Standard Test Method for Flow Characteristics of
Preformed Tape Sealants
Standard Specification for Heavy Vehicular Paving
Brick
Standard Specification for Solvent Release Sealants
Standard Test Method for Compressive Strength of
Masonry Prisms
Standard Specification for Faced Rigid Cellular
Polyisocyanurate Thermal Insulation Board
Standard Specification for Cylindrical Sealant Backing
for Use with Cold Liquid-Applied Sealants
Standard Test Method for Flowability and Bearing Area
of Chemical-Resistant Polymer Machinery Grouts
Standard Test Method for Determination of Low
Concentrations of Uranium in Oils and Organic Liquids
by X-ray Fluorescence
Standard Practice for Dissolution of UF6 from P-10
Tubes
Standard Test Method for Measurement of Viscosity of
Glass Between 104 Pa.s and 108 Pa.s by Viscous
Compression of a Solid Right Cylinder [Metri
Standard Test Methods for Evaluating Masonry Bond
Strength
Standard Practice for Constant-Amplitude, Axial,
Tension-Tension Cyclic Fatigue of Continuous FiberReinforced Advanced Ceramics at Ambient Temperat
Standard Practice for Constant-Amplitude, Axial,
Tension-Tension Cyclic Fatigue of Advanced Ceramics
at Ambient Temperatures
Standard Specification for Molded Glass Fiber
Reinforced Gypsum Parts
Standard Specification for Admixtures for Masonry
Mortars
Standard Specification for Gypsum Board
Standard Test Methods for Sampling and Testing
C 144
C 324
C 33
C 393
C 459
C 16
C 179
C 216
C 226
C 289
C 423
C 458
C 469
C 478
C 500
C 501
C 51
C 541
C 587
C 621
C 634
C 71
C 717
C 675
Concrete Masonry Units and Related Units
Standard Specification for Aggregate for Masonry
Mortar
Standard Test Method for Free Moisture in Ceramic
Whiteware Clays
Standard Specification for Concrete Aggregates
Standard Test Method for Flexural Properties of
Sandwich Constructions
Standard Test Methods for Asbestos-Cement Flat
Products
Standard Test Method for Load Testing Refractory
Brick at High Temperatures
Standard Test Method for Drying and Firing Linear
Change of Refractory Plastic and Ramming Mix
Specimens
Standard Specification for Facing Brick (Solid Masonry
Units Made from Clay or Shale)
Standard Specification for Air-Entraining Additions for
Use in the Manufacture of Air-Entraining Hydraulic
Cement
Standard Test Method for Potential Alkali-Silica
Reactivity of Aggregates (Chemical Method)
Standard Test Method for Sound Absorption and Sound
Absorption Coefficients by the Reverberation Room
Method
Standard Test Method for Organic Fiber Content of
Asbestos-Cement Products
Standard Test Method for Static Modulus of Elasticity
and Poisson's Ratio of Concrete in Compression
Standard Specification for Precast Reinforced Concrete
Manhole Sections
Standard Test Methods for Asbestos-Cement Pipe
Standard Test Method for Relative Resistance to Wear
of Unglazed Ceramic Tile by the Taber Abraser
Standard Terminology Relating to Lime and Limestone
(as used by the Industry)
Standard Specification for Linings for Asbestos-Cement
Pipe
Standard Specification for Gypsum Veneer Plaster
Standard Test Method for Isothermal Corrosion
Resistance of Refractories to Molten Glass
Standard Terminology Relating to Environmental
Acoustics
Standard Terminology Relating to Refractories
Standard Terminology of Building Seals and Sealants
Standard Test Method for Alkali Resistance of Ceramic
C 704
C 749
C 757
C 780
C 793
C 800
C 838
C 877
C 877M
C 902
C 913
C 965
C 967
C 97
D 1051
D 1059
D 1117
C 978
D 1043
D 1079
D 1126
D 1129
D 1160
Decorations on Returnable Beverage Glass Containers
Standard Test Method for Abrasion Resistance of
Refractory Materials at Room Temperature
Standard Test Method for Tensile Stress-Strain of
Carbon and Graphite
Standard Specification for Nuclear-Grade Plutonium
Dioxide Powder, Sinterable
Standard Test Method for Preconstruction and
Construction Evaluation of Mortars for Plain and
Reinforced Unit Masonry
Standard Test Method for Effects of Accelerated
Weathering on Elastomeric Joint Sealants
Standard Specification for Glass Fiber Blanket
Insulation (Aircraft Type)
Standard Test Method for Bulk Density of AsManufactured Carbon and Graphite Shapes
Standard Specification for External Sealing Bands for
Concrete Pipe, Manholes, and Precast Box Sections
Standard Specification for External Sealing Bands for
Concrete Pipe, Manholes, and Precast Box Sections
[Metric]
Standard Specification for Pedestrian and Light Traffic
Paving Brick
Standard Specification for Precast Concrete Water and
Wastewater Structures
Standard Practice for Measuring Viscosity of Glass
Above the Softening Point
Standard Specification for Uranium Ore Concentrate
Standard Test Methods for Absorption and Bulk
Specific Gravity of Dimension Stone
Standard Specification for Rubber Insulating Sleeves
Standard Test Method for Yarn Number Based on ShortLength Specimens
Standard Guide for Evaluating Nonwoven Fabrics
Standard Test Method for Photoelastic Determination of
Residual Stress in a Transparent Glass Matrix Using a
Polarizing Microscope and Optical Retardation
Compensat
Standard Test Method for Stiffness Properties of Plastics
as a Function of Temperature by Means of a Torsion
Test
Standard Terminology Relating to Roofing,
Waterproofing, and Bituminous Materials
Standard Test Method for Hardness in Water
Standard Terminology Relating to Water
Standard Test Method for Distillation of Petroleum
D 120
D 1208
D 123
D 1238
D 1240
D 1248
D 1267
D 1278
D 13
D 1308
D 1510
D 1566
D 1676
D 1319
D 1351
D 1412
D 1440
D 1464
D 1474
D 1485
D 1492
D 1505
D 1677
D 1679
Products at Reduced Pressure
Standard Specification for Rubber Insulating Gloves
Standard Test Methods for Common Properties of
Certain Pigments
Standard Terminology Relating to Textiles
Standard Test Method for Melt Flow Rates of
Thermoplastics by Extrusion Plastometer
Standard Test Methods for Rosin Acids Content of
Naval Stores, Including Rosin, Tall Oil, and Related
Products
Standard Specification for Polyethylene Plastics
Extrusion Materials for Wire and Cable
Standard Test Method for Gage Vapor Pressure of
Liquefied Petroleum (LP) Gases (LP-Gas Method)
Standard Test Methods for Rubber from Natural Sources
- Chemical Analysis
Standard Specification for Spirits of Turpentine
Standard Test Method for Effect of Household
Chemicals on Clear and Pigmented Organic Finishes
Standard Test Method for Carbon Black - Iodine
Adsorption Number
Standard Terminology Relating to Rubber
Standard Test Methods for Film-Insulated Magnet Wire
Standard Test Method for Hydrocarbon Types in Liquid
Petroleum Products by Fluorescent Indicator Adsorption
Standard Specification for Thermoplastic Polyethylene
Insulation for Electrical Wire and Cable
Standard Test Method for Equilibrium Moisture of Coal
at 96 to 97 Percent Relative Humidity and 30°C
Standard Test Method for Length and Length
Distribution of Cotton Fibers (Array Method)
Standard Test Method for Differential Dyeing Behavior
of Cotton
Standard Test Methods for Indentation Hardness of
Organic Coatings
Standard Test Methods for Rubber from Natural Sources
- Sampling and Sample Preparation
Standard Test Method for Bromine Index of Aromatic
Hydrocarbons by Coulometric Titration
Standard Test Method for Density of Plastics by the
Density-Gradient Technique
Standard Methods for Sampling and Testing Untreated
Mica Paper Used for Electrical Insulation
Standard Specification for Synthetic Rubber Heat-and
Moisture-Resisting Insulation for Wire and Cable, 75 øC
Operation
D 1684
D 1688
D 1691
D 1708
D 1711
D 2052
D 2198
D 1757
D 1881
D 1909
D 197
D 1971
D 1976
D 1987
D 1997
D 2109
D 2111
D 2148
D 2167
D 2197
D 2305
D 233
D 2573
Standard Practice for Lighting Cotton Classing Rooms
for Color Grading
Standard Test Methods for Copper in Water
Standard Test Methods for Zinc in Water
Standard Test Method for Tensile Properties of Plastics
By Use of Microtensile Specimens
Standard Terminology Relating to Electrical Insulation
Standard Test Method for Colorfastness of Zippers to
Drycleaning
Standard Test Method for Stain Removal From
Multicolor Lacquers
Standard Test Method for Sulfate Sulfur in Ash from
Coal and Coke
Standard Test Method for Foaming Tendencies of
Engine Coolants in Glassware
Standard Table of Commercial Moisture Regains for
Textile Fibers
Standard Test Method for Sampling and Fineness Test
of Pulverized Coal
Standard Practices for Digestion of Water Samples for
Determination of Metals by Flame Atomic Absorption,
Graphite Furnace Atomic Absorption, Plasma Emission
Spect
Standard Test Method for Elements in Water by
Inductively-Coupled Argon Plasma Atomic Emission
Spectroscopy
Standard Test Method for Biological Clogging of
Geotextile or Soil/Geotextile Filters
Standard Test Method for Laboratory Determination of
the Fiber Content of Peat Samples by Dry Mass
Standard Test Methods for Nonvolatile Matter in
Halogenated Organic Solvents and Their Admixtures
Standard Test Methods for Specific Gravity and Density
of Halogenated Organic Solvents and Their Admixtures
Standard Test Methods for Bondable Silicone Rubber
Tapes Used for Electrical Insulation
Standard Test Method for Density and Unit Weight of
Soil in Place by the Rubber Balloon Method
Standard Test Method for Adhesion of Organic Coatings
by Scrape Adhesion
Standard Test Methods for Polymeric Films Used for
Electrical Insulation
Standard Test Methods of Sampling and Testing
Turpentine
Standard Test Method for Field Vane Shear Test in
Cohesive Soil
D 2812
D 2219
D 2220
D 2227
D 2244
D 2260
D 2308
D 2322
D 2370
D 2395
D 240
D 2412
D 2421
D 2422
D 2448
D 2500
D 2569
D 2477
D 2507
D 2508
D 2512
Standard Test Method for Non-Lint Content of Cotton
Standard Specification for Poly(Vinyl Chloride)
Insulation for Wire and Cable, 60 øC Operation
Standard Specification for Poly(Vinyl Chloride)
Insulation for Wire and Cable, 75 øC Operation
Standard Specification for Natural Rubber (NR)
Technical Grades
Standard Practice for Calculation of Color Tolerances
and Color Differences from Instrumentally Measured
Color Coordinates
Standard Tables of Conversion Factors and Equivalent
Yarn Numbers Measured in Various Numbering
Systems
Standard Specification for Thermoplastic Polyethylene
Jacket for Electrical Wire and Cable
Standard Test Method for Resistance of Shoe Upper
Leather to Artificial Perspiration
Standard Test Method for Tensile Properties of Organic
Coatings
Standard Test Methods for Specific Gravity of Wood
and Wood-Based Materials
Standard Test Method for Heat of Combustion of Liquid
Hydrocarbon Fuels by Bomb Calorimeter
Standard Test Method for Determination of External
Loading Characteristics of Plastic Pipe by Parallel-Plate
Loading
Standard Practice for Interconversion of Analysis of C5
and Lighter Hydrocarbons to Gas-Volume, LiquidVolume, or Mass Basis
Standard Classification of Industrial Fluid Lubricants by
Viscosity System
Standard Test Method for Water-Soluble Salts in
Pigments by Measuring the Specific Resistance of the
Leachate of the Pigment
Standard Test Method for Cloud Point of Petroleum
Products
Standard Test Method for Distillation of Pitch
Standard Test Method for Dielectric Breakdown Voltage
and Dielectric Strength of Insulating Gases at
Commercial Power Frequencies
Standard Terminology of Rheological Properties of
Gelled Rocket Propellants
Standard Test Method for Solid Rocket Propellant
Specific Impulse Measurements
Standard Test Method for Compatibility of Materials
with Liquid Oxygen (Impact Sensitivity Threshold and
D 2513
D 2517
D 2526
D 2539
D 2540
D 2541
D 2549
D 2570
D 2589
D 2590
D 2634
D 2693
D 2752
D 2595
D 2596
D 2619
D 2661
D 2665
D 269
D 2719
D 2804
D 2834
Pass-Fail Techniques)
Standard Specification for Thermoplastic Gas Pressure
Pipe, Tubing, and Fittings
Standard Specification for Reinforced Epoxy Resin Gas
Pressure Pipe and Fittings
Standard Specification for Ozone-Resisting Silicone
Rubber Insulation for Wire and Cable
Standard Test Method for Shock Sensitivity of Liquid
Monopropellants by the Card-Gap Test
Standard Test Method for Drop-Weight Sensitivity of
Liquid Monopropellants
Standard Test Method for Critical Diameter and
Detonation Velocity of Liquid Monopropellants
Standard Test Method for Separation of Representative
Aromatics and Nonaromatics Fractions of High-Boiling
Oils by Elution Chromatography
Standard Test Method for Simulated Service Corrosion
Testing of Engine Coolants
Standard Test Method for McNett Wet Classification of
Dual Asbestos Fiber
Standard Test Method for Sampling Chrysotile Asbestos
Standard Specification for Methyl Amyl Acetate (95 %
Grade)
Standard Specification for Ethylene Glycol
Standard Test Methods for Air Permeability of Asbestos
Fibers
Standard Test Method for Evaporation Loss of
Lubricating Greases Over Wide-Temperature Range
Standard Test Method for Measurement of ExtremePressure Properties of Lubricating Grease (Four-Ball
Method)
Standard Test Method for Hydrolytic Stability of
Hydraulic Fluids (Beverage Bottle Method)
Standard Specification for Acrylonitrile-ButadieneStyrene (ABS) Schedule 40 Plastic Drain, Waste, and
Vent Pipe and Fittings
Standard Specification for Poly(Vinyl Chloride) (PVC)
Plastic Drain, Waste, and Vent Pipe and Fittings
Standard Test Method for Insoluble Matter in Rosin and
Rosin Derivatives
Standard Test Methods for Structural Panels in Shear
Through-the-Thickness
Standard Test Method for Purity of Methyl Ethyl Ketone
By Gas Chromatography
Standard Test Method for Nonvolatile Matter (Total
Solids) in Water-Emulsion Floor Polishes, Solvent-
D 2837
D 2838
D 2844
D 2864
D 2917
D 2947
D 2985
D 3128
D 291
D 2937
D 2942
D 2989
D 3004
D 3131
D 3143
D 3148
D 3172
D 3176
D 3177
D 3178
D 3179
D 3180
D 3192
Based Floor Polishes, and Pol
Standard Test Method for Obtaining Hydrostatic Design
Basis for Thermoplastic Pipe Materials
Standard Test Method for Shrink Tension and
Orientation Release Stress of Plastic Film and Thin
Sheeting
Standard Test Method for Resistance R-Value and
Expansion Pressure of Compacted Soils
Standard Terminology Relating to Electrical Insulating
Liquids and Gases
Standard Specification for Methyl Isoamyl Ketone
Standard Test Method for Screen Analysis of Asbestos
Fibers
Standard Test Method for Color of Asbestos
Standard Specification for 2-Methoxyethanol
Standard Test Method for Cubic Foot Weight of
Crushed Bituminous Coal
Standard Test Method for Density of Soil in Place by the
Drive-Cylinder Method
Standard Test Method for Total Acid Acceptance of
Halogenated Organic Solvents (Nonreflux Methods)
Standard Test Method for Acidity-Alkalinity of
Halogenated Organic Solvents and Their Admixtures
Standard Specification for Extruded Crosslinked and
Thermoplastic Semi-Conducting, Conductor and
Insulation Shielding Materials
Standard Specification for Isopropyl Acetate (99 %
Grade)
Flash Point of Cutback Asphalt with Tag Open-Cup
Apparatus
Standard Test Method for Elastic Moduli of Intact Rock
Core Specimens in Uniaxial Compression
Standard Practice for Proximate Analysis of Coal and
Coke
Standard Practice for Ultimate Analysis of Coal and
Coke
Standard Test Methods for Total Sulfur in the Analysis
Sample of Coal and Coke
Standard Test Methods for Carbon and Hydrogen in the
Analysis Sample of Coal and Coke
Standard Test Methods for Nitrogen in the Analysis
Sample of Coal and Coke
Standard Practice for Calculating Coal and Coke
Analyses from As-Determined to Different Bases
Standard Test Methods for Carbon Black Evaluation in
NR (Natural Rubber)
D 3223
D 3231
D 3186
D 3191
D 3217
D 3302
D 3314
D 3325
D 3326
D 3403
D 3440
D 3461
D 3475
D 3484
D 3485
D 3498
D 3519
D 3590
D 3601
D 3585
D 3614
D 3639
D 3641
Standard Test Method for Total Mercury in Water
Standard Test Method for Phosphorus in Gasoline
Standard Test Methods for Rubber - Evaluation of SBR
(Styrene-Butadiene Rubber) Mixed With Carbon Black
or Carbon Black and Oil
Standard Test Methods for Carbon Black in SBR
(Styrene-Butadiene Rubber) - Recipe and Evaluation
Procedures
Standard Test Methods for Breaking Tenacity of
Manufactured Textile Fibers in Loop or Knot
Configurations
Standard Test Method for Total Moisture in Coal
Standard Test Method for Rubber - Chemical Analysis
for Polystyrene Blocks In SBR (Styrene-Butadiene
Rubber) and Styrene-Reinforced Latices
Standard Practice for Preservation of Waterborne Oil
Samples
Standard Practice for Preparation of Samples for
Identification of Waterborne Oils
Standard Test Methods for Rubber - Evaluation of IR
(Isoprene Rubber)
Standard Guide for Preparing Specifications for WaterEmulsion Floor Polishes
Standard Test Method for Softening Point of Asphalt
and Pitch (Mettler Cup-and-Ball Method)
Standard Classification of Child-Resistant Packages
Standard Test Methods for Rubber - Evaluation of OilExtended Solution BR (Polybutadiene Rubber)
Standard Specification for Smooth-Wall Coilable
Polyethylene (PE) Conduit (Duct) for Preassembled
Wire and Cable
Standard Specification for Adhesives for Field-Gluing
Plywood to Lumber Framing for Floor Systems
Standard Test Method for Foam in Aqueous Media
(Blender Test)
Standard Test Methods for Total Kjeldahl Nitrogen in
Water
Standard Test Method for Foam In Aqueous Media
(Bottle Test)
Standard Specification for ASTM Reference Fluid for
Coolant Tests
Standard Guide for Laboratories Engaged in Sampling
and Analysis of Atmospheres and Emissions
Standard Test Method for Classification of Asbestos by
Quebec Standard Test
Standard Practice for Injection Molding Test Specimens
D 3652/D 3652M
D 3655
D 3679
D 3690
D 3691
D 3697
D 3752
D 3761
D 3779
D 3780
D 3785
D 3878
D 388
D 3781
D 3782
D 3783
D 3784
D 3819
D 3820
D 3920
D 3957
D 3972
of Thermoplastic Molding and Extrusion Materials
Standard Test Method for Thickness of PressureSensitive Tapes
Standard Performance Specification for Men's and
Women's Sliver Knitted Overcoat and Jacket Fabrics
Standard Specification for Rigid Poly(Vinyl Chloride)
(PVC) Siding
Standard Performance Specification for Vinyl-Coated
and Urethane-Coated Upholstery Fabrics - Indoor
Standard Performance Specification for Woven, Lace,
and Knit Household Curtain and Drapery Fabrics
Standard Test Method for Antimony in Water
Standard Test Method for Strength Imparted by
Asbestos to a Cementitious Matrix
Standard Test Method for Total Fluorine in Coal by the
Oxygen Bomb Combustion/Ion Selective Electrode
Method
Standard Performance Specification for Women's and
Girls' Woven Rainwear and All-Purpose, WaterRepellent Coat Fabrics
Standard Performance Specification for Men's and Boys'
Woven Dress Suit Fabrics and Woven Sportswear
Jacket, Slack, and Trouser Fabrics
Standard Performance Specification for Woven Necktie
and Scarf Fabrics
Standard Terminology for Composite Materials
Standard Classification of Coals by Rank
Standard Performance Specification for Men's and Boys'
Knitted Rainwear and All-Purpose, Water-Repellent
Coat Fabrics
Standard Performance Specification for Men's and Boys'
Knitted Dress Suit Fabrics and Knitted Sportswear
Jacket, Slack, and Trouser Fabrics
Standard Performance Specification for Woven Flat
Lining Fabrics for Men's and Boys' Apparel
Standard Performance Specification for Men's and Boys'
Woven Bathrobe and Dressing Gown Fabrics
Standard Performance Specification for Men's and Boys'
Woven Pajama Fabrics
Standard Performance Specification for Men's and Boys'
Woven Underwear Fabrics
Standard Test Method for Strontium in Water
Standard Practices for Establishing Stress Grades for
Structural Members Used in Log Buildings
Standard Test Method for Isotopic Uranium in Water by
Radiochemistry
D 3985
D 3986
D 3994
D 3995
D 3996
D 4000
D 409
D 4107
D 4026
D 4028
D 4032
D 4035
D 4048
D 4052
D 4075
D 4109
D 4111
D 4112
D 4113
D 4114
D 4145
Standard Test Method for Oxygen Gas Transmission
Rate Through Plastic Film and Sheeting Using a
Coulometric Sensor
Standard Test Method for Barium in Brines, Seawater,
and Brackish Water by Direct-Current Argon Plasma
Atomic Emission Spectroscopy
Standard Performance Specification for Woven
Swimwear Fabrics
Standard Performance Specification for Men's and
Women's Knitted Career Apparel Fabrics: Dress and
Vocational
Standard Performance Specification for Knit Swimwear
Fabrics
Standard Classification System for Specifying Plastic
Materials
Standard Test Method for Grindability of Coal by the
Hardgrove-Machine Method
Standard Test Method for Tritium in Drinking Water
Standard Test Method for Rubber Latex - StyreneButadiene Copolymer - Determination of Residual
Styrene
Standard Specification for Solar Screening Woven from
Vinyl-Coated Fiber Glass Yarn
Standard Test Method for Stiffness of Fabric by the
Circular Bend Procedure
Standard Performance Specification for Knitted Necktie
and Scarf Fabrics
Standard Test Method for Detection of Copper
Corrosion from Lubricating Grease
Standard Test Method for Density and Relative Density
of Liquids by Digital Density Meter
Standard Test Methods for Compounding Materials Flame Atomic Absorption Technique - Determination of
Metals
Standard Performance Specification for Men's and Boys'
Woven Coverall, Dungaree, Overall, and Shop-Coat
Fabrics
Standard Performance Specification for Woven Napery
and Tablecloth Fabrics: Household and Institutional
Standard Performance Specification for Woven
Umbrella Fabrics
Standard Performance Specification for Woven
Slipcover Fabrics
Standard Performance Specification for Woven Flat
Lining Fabrics for Women's and Girls' Apparel
Standard Test Method for Coating Flexibility of
D 4169
D 4217
D 4276
D 4288
D 440
D 4208
D 4242
D 4245
D 4246
D 4255/D 4255M
D 4294
D 4325
D 4340
D 4347
D 4348
D 4355
D 4382
D 441
D 4466
D 4962
D 4975
Prepainted Sheet
Standard Practice for Performance Testing of Shipping
Containers and Systems
Standard Test Method for Gel Time of Thermosetting
Coating Powder
Standard Practice for Confined Area Entry
Standard Specification for Calcium Borosilicate
Pigments
Standard Test Method of Drop Shatter Test for Coal
Standard Test Method for Total Chlorine in Coal by the
Oxygen Bomb Combustion/Ion Selective Electrode
Method
Standard Test Method for Inclined Plate Flow for
Thermosetting Coating Powders
Standard Specification for Ozone-Resistant
Thermoplastic Elastomer Insulation For Wire and Cable,
90 øC Dry/75 øC Wet Operation
Standard Specification for Ozone-Resistant
Thermoplastic Elastomer Insulation For Wire and Cable,
90 øC Operation
Standard Test Method for In-Plane Shear Properties of
Polymer Matrix Composite Materials by the Rail Shear
Method
Standard Test Method for Sulfur in Petroleum and
Petroleum Products by Energy-Dispersive X-ray
Fluorescence Spectrometry
Standard Test Methods for Nonmetallic SemiConducting and Electrically Insulating Rubber Tapes
Standard Test Method for Corrosion of Cast Aluminum
Alloys in Engine Coolants Under Heat-Rejecting
Conditions
Standard Practice for Collecting Benthic
Macroinvertebrates with Shipek (Scoop) Grab Sampler
Standard Practice for Collecting Benthic
Macroinvertebrates with Holme (Scoop) Grab Sampler
Standard Test Method for Deterioration of Geotextiles
by Exposure to Light, Moisture and Heat in a Xenon
Arc Type Apparatus
Standard Test Method for Barium in Water, Atomic
Absorption Spectrophotometry, Graphite Furnace
Standard Test Method of Tumbler Test for Coal
Standard Terminology for Multicomponent Textile
Fibers
Standard Practice for Nal(TI) Gamma-Ray Spectrometry
of Water
Standard Test Methods for Single-Filament Tire Bead
D 4387
D 4388
D 4398
D 4401
D 4402
D 4407
D 4425
D 4488
D 4506
D 4539
D 4553
D 4554
D 4556
D 4847
D 49
D 4931
D 4557
D 4558
D 4623
D 4629
Wire Made from Steel
Standard Guide for Selecting Grab Sampling Devices
for Collecting Benthic Macroinvertebrates
Standard Specification for Nonmetallic SemiConducting and Electrically Insulating Rubber Tapes
Standard Test Method for Determining the Chemical
Resistance of Fiberglass-Reinforced Thermosetting
Resins by One-Side Panel Exposure
Standard Practice for Collecting Benthic
Macroinvertebrates With Petersen Grab Sampler
Standard Test Method for Viscosity Determination of
Asphalt at Elevated Temperatures Using a Rotational
Viscometer
Standard Practice for Collecting Benthic
Macroinvertebrates With Orange Peel Grab Sampler
Standard Test Method for Oil Separation from
Lubricating Grease by Centrifuging (Koppers Method)
Standard Guide for Testing Cleaning Performance of
Products Intended for Use on Resilient Flooring and
Washable Walls
Standard Test Method for Determining the In Situ
Modulus of Deformation of Rock Mass Using a Radial
Jacking Test
Standard Test Method for Filterability of Diesel Fuels
by Low-Temperature Flow Test (LTFT)
Standard Test Method for Determining In Situ Creep
Characteristics of Rock
Standard Test Method for In Situ Determination of
Direct Shear Strength of Rock Discontinuities
Standard Guide for Selecting Stream-Net Sampling
Devices for Collecting Benthic Macroinvertebrates
Standard Performance Specification for Woven Awning
and Canopy Fabrics
Standard Test Methods of Chemical Analysis of Red
Lead
Standard Test Method for Gross Moisture in Green
Petroleum Coke
Standard Practice for Collecting Benthic
Macroinvertebrates with Surber and Related Type
Samplers
Standard Practice for Collecting Benthic
Macroinvertebrates With Drift Nets
Standard Test Method for Determination of In Situ
Stress in Rock Mass by Overcoring Method - USBM
Borehole Deformation Gage
Standard Test Method for Trace Nitrogen in Liquid
D 4674
D 4726
D 4742
D 4749
D 4756
D 4761
D 4762
D 4771
D 4773
D 5038
D 5079
D 4873
D 4886
D 4974
D 5009
D 5034
D 5044
D 5050
D 5051
D 5083
Petroleum Hydrocarbons by Syringe/Inlet Oxidative
Combustion and Chemiluminescence Detection
Standard Test Method for Accelerated Testing for Color
Stability of Plastics Exposed to Indoor Fluorescent
Lighting and Window-Filtered Daylight
Standard Specification for Rigid Poly(Vinyl Chloride)
(PVC) Exterior-Profile Extrusions Used for Assembled
Windows and Doors
Standard Test Method for Oxidation Stability of
Gasoline Automotive Engine Oils by Thin-Film Oxygen
Uptake (TFOUT)
Standard Test Method for Performing the Sieve
Analysis of Coal and Designating Coal Size
Standard Practice for Installation of Rigid Poly(Vinyl
Chloride) (PVC) Siding and Soffit
Standard Test Methods for Mechanical Properties of
Lumber and Wood-Base Structural Material
Standard Guide for Testing Automotive/Industrial
Composite Materials
Standard Performance Specification for Knitted
Upholstery Fabrics for Indoor Furniture
Standard Test Method for Purity of Propylene Glycol
Monomethyl Ether, Dipropylene Glycol Monomethyl
Ether, and Propylene Glycol Monomethyl Ether Acetate
Standard Terminology of Textile Conservation
Standard Practices for Preserving and Transporting
Rock Core Samples
Standard Guide for Identification, Storage, and Handling
of Geosynthetic Rolls and Samples
Standard Test Method for Abrasion Resistance of
Geotextiles (Sand Paper/Sliding Block Method)
Standard Test Method for Hot Air Thermal Shrinkage of
Yarn and Cord Using a Thermal Shrinkage Oven
Standard Test Method for Evaluating and Comparing
Transfer Efficiency of Spray Applied Coatings Under
Laboratory Conditions
Standard Test Method for Breaking Strength and
Elongation of Textile Fabrics (Grab Test)
Standard Test Method for Rubber Chemicals - Free 2Mercaptobenzothiazole (MBT) in Benzothiazyl
Disulfide (MBTS)
Standard Guide for Commercial Use of Lime Kiln Dusts
and Portland Cement Kiln Dusts
Standard Test Method for Rubber Chemicals Benzothiazyl Disulfide (MBTS) - Assay
Standard Test Method for Tensile Properties of
D 5088
D 5095
D 5135
D 5142
D 5178
D 5309
D 5427
D 5147
D 5174
D 5182
D 5187
D 5195
D 5220
D 5236
D 5250
D 5258
D 5291
D 5301
D 5305
D 5330/D 5330M
D 5370
Reinforced Thermosetting Plastics Using Straight-Sided
Specimens
Standard Practices for Decontamination of Field
Equipment Used at Waste Sites
Standard Test Method for Determination of the
Nonvolatile Content in Silanes, Siloxanes and SilaneSiloxane Blends Used in Masonry Water Repellen
Standard Test Method for Analysis of Styrene by
Capillary Gas Chromatography
Standard Test Methods for Proximate Analysis of the
Analysis Sample of Coal and Coke by Instrumental
Procedures
Standard Test Method for Mar Resistance of Organic
Coatings
Standard Specification for Cyclohexane 999
Standard Practice for Accelerated Aging of Inflatable
Restraint Fabrics
Standard Test Methods for Sampling and Testing
Modified Bituminous Sheet Material
Standard Test Method for Trace Uranium in Water by
Pulsed-Laser Phosphorimetry
Standard Test Method for Evaluating the Scuffing Load
Capacity of Oils (FZG Visual Method)
Standard Test Method for Determination of Crystallite
Size (Lc of Calcined Petroleum Coke by X-Ray
Diffraction
Standard Test Method for Density of Soil and Rock InPlace at Depths Below the Surface by Nuclear Methods
Standard Test Method for Water Content of Soil and
Rock In-Place by the Neutron Depth Probe Method
Standard Test Method for Distillation of Heavy
Hydrocarbon Mixtures (Vacuum Potstill Method)
Standard Specification for Poly(Vinyl chloride) Gloves
for Medical Application
Standard Practice for Acid-Extraction of Elements from
Sediments Using Closed Vessel Microwave Heating
Standard Test Methods for Instrumental Determination
of Carbon, Hydrogen, and Nitrogen in Petroleum
Products and Lubricants
Standard Practice for Physical Characterization of Paint
Brushes
Standard Test Method for Determination of Ethyl
Mercaptan in LP-Gas Vapor
Standard Specification for Pressure-Sensitive Tape for
Packaging, Filament-Reinforced
Standard Specification for Pozzolanic Blended Materials
D 6043
D 6046
D 6198
D 5373
D 5403
D 5426
D 5428
D 5446
D 5468
D 5475
D 5489
D 5528
D 5586
D 5591
D 5607
D 5608
D 566
D 5865
D 6026
D 5634
D 5651
in Construction Applications
Standard Guide for Selection of Permanent and Durable
Artist's Paper
Standard Classification of Hydraulic Fluids for
Environmental Impact
Standard Guide for Transport Packaging Design
Standard Test Methods for Instrumental Determination
of Carbon, Hydrogen, and Nitrogen in Laboratory
Samples of Coal and Coke
Standard Test Methods for Volatile Content of
Radiation Curable Materials
Standard Practices for Visual Inspection and Grading of
Fabrics Used for Inflatable Restraints
Standard Practice for Evaluating the Performance of
Inflatable Restraint Modules
Standard Practice for Determining Physical Properties of
Fabrics, Yarns, and Sewing Thread Used in Inflatable
Restraints
Standard Test Method for Gross Calorific and Ash
Value of Waste Materials
Standard Test Method for Nitrogen- and PhosphorusContaining Pesticides in Water by Gas Chromatography
with a Nitrogen-Phosphorus Detector
Standard Guide for Care Symbols for Care Instructions
on Textile Products
Standard Test Method for Mode I Interlaminar Fracture
Toughness of Unidirectional Fiber-Reinforced Polymer
Matrix Composites
Standard Tables of Body Measurements for Women
Aged 55 and Older (All Figure Types)
Standard Test Method for Thermal Shrinkage Force of
Yarn and Cord With a Thermal Shrinkage Force Tester
Standard Test Method for Performing Laboratory Direct
Shear Strength Tests of Rock Specimens Under
Constant Normal Force
Standard Practices for Decontamination of Field
Equipment Used at Low Level Radioactive Waste Sites
Standard Test Method for Dropping Point of Lubricating
Grease
Standard Test Method for Gross Calorific Value of Coal
and Coke
Standard Practice for Using Significant Digits in
Geotechnical Data
Standard Guide for Selection of Permanent and Durable
Offset and Book Papers
Standard Test Method for Surface Bond Strength of
D 5685
D 5687/D 5687M
D 5714
D 5720
D 5749
D 5762
D 5771
D 5772
D 5773
D 5792
D 5807
D 801
D 802
D 803
D 5822
D 5846
D 5856
D 5861
D 5904
D 5931
Wood-Base Fiber and Particle Panel Materials
Standard Specification for "Fiberglass" (Glass-FiberReinforced Thermosetting-Resin) Pressure Pipe Fittings
Standard Guide for Preparation of Flat Composite
Panels with Processing Guidelines for Specimen
Preparation
Standard Specification for Content of Digital Geospatial
Metadata
Standard Practice for Static Calibration of Electronic
Transducer-Based Pressure Measurement Systems for
Geotechnical Purposes
Standard Specification for Reinforced and Plain
Gummed Tape for Sealing and Securing
Standard Test Method for Nitrogen in Petroleum and
Petroleum Products by Boat-Inlet Chemiluminescence
Standard Test Method for Cloud Point of Petroleum
Products (Optical Detection Stepped Cooling Method)
Standard Test Method for Cloud Point of Petroleum
Products (Linear Cooling Rate Method)
Standard Test Method for Cloud Point of Petroleum
Products (Constant Cooling Rate Method)
Standard Practice for Generation of Environmental Data
Related to Waste Management Activities: Development
of Data Quality Objectives
Standard Practice for Evaluating the Overpressurization
Characteristics of Inflatable Restraint Cushions
Standard Test Methods for Sampling and Testing
Dipentene
Standard Test Methods for Sampling and Testing Pine
Oils
Standard Test Methods for Testing Tall Oil
Standard Test Method for Determining Seam Strength in
Inflatable Restraint Cushions
Standard Test Method for Universal Oxidation Test for
Hydraulic and Turbine Oils Using the Universal
Oxidation Test Apparatus
Standard Test Method for Measurement of Hydraulic
Conductivity of Porous Material Using a Rigid-Wall,
Compaction-Mold Permeameter
Standard Guide for Significance of Particle Size
Measurements of Coating Powders
Standard Test Method for Total Carbon, Inorganic
Carbon, and Organic Carbon in Water by Ultraviolet,
Persulfate Oxidation, and Membrane Conductivity
Detection
Standard Test Method for Density and Relative Density
D 5932
D 5934
D 5952
D 5955
D 857
D 858
D 882
D 953
D 5972
D 5987
D 6007
D 6037
D 6045
D 6120
D 6185
D 6208
D 6234
D 6272
of Engine Coolant Concentrates and Aqueous Engine
Coolants by Digital Density Meter
Standard Test Method for Determination of 2,4-Toluene
Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate
(2,6-TDI) in Air (with 9-(N-Methylamino
Standard Test Method for Determination of Modulus of
Elasticity for Rigid and Semi-Rigid Plastic Specimens
by Controlled Rate of Loading Using Three-Point
Bending
Standard Guide for Inspecting Water Systems for
Legionellae and Investigating Possible Outbreaks of
Legionellosis (Legionnaires' Disease or Ponti
Standard Test Methods for Estimating Contribution of
Environmental Tobacco Smoke to Respirable
Suspended Particles Based on UVPM and FPM
Standard Test Method for Aluminum in Water
Standard Test Methods for Manganese in Water
Standard Test Method for Tensile Properties of Thin
Plastic Sheeting
Standard Test Method for Bearing Strength of Plastics
Standard Test Method for Freezing Point of Aviation
Fuels (Automatic Phase Transition Method)
Standard Test Method for Total Fluorine in Coal and
Coke by Pyrohydrolytic Extraction and Ion Selective
Electrode or Ion Chromatograph Methods
Standard Test Method for Determining Formaldehyde
Concentration in Air from Wood Products Using a
Small Scale Chamber
Standard Test Methods for Dry Abrasion Mar
Resistance of High Gloss Coatings
Standard Test Method for Color of Petroleum Products
by the Automatic Tristimulus Method
Standard Test Method for Electrical Resistivity of
Anode and Cathode Carbon Material at Room
Temperature
Standard Practice for Evaluating Compatibility of
Binary Mixtures of Lubricating Greases
Standard Test Method for Repassivation Potential of
Aluminum and Its Alloys by Galvanostatic
Measurement
Standard Test Method for Shake Extraction of Mining
Waste by the Synthetic Precipitation Leaching
Procedure
Standard Test Method for Flexural Properties of
Unreinforced and Reinforced Plastics and Electrical
Insulating Materials by Four-Point Bending
D 6278
D 6305
D 653
D 695
D 732
D 6319
D 747
D 790
D 848
D 861
D 885
D 952
D 960
D 97
D 972
D 996
E1
E 100
E 1004
E 1029
E 11
E 1115
Standard Test Method for Shear Stability of Polymer
Containing Fluids Using a European Diesel Injector
Apparatus
Standard Practice for Calculating Bending Strength
Design Adjustment Factors for Fire-Retardant-Treated
Plywood Roof Sheathing
Standard Terminology Relating to Soil, Rock, and
Contained Fluids
Standard Test Method for Compressive Properties of
Rigid Plastics
Standard Test Method for Shear Strength of Plastics by
Punch Tool
Standard Specification for Nitrile Examination Gloves
for Medical Application
Standard Test Method for Apparent Bending Modulus
of Plastics by Means of a Cantilever Beam
Standard Test Methods for Flexural Properties of
Unreinforced and Reinforced Plastics and Electrical
Insulating Materials
Standard Test Method for Acid Wash Color of Industrial
Aromatic Hydrocarbons
Standard Practice for Use of the Tex System to
Designate Linear Density of Fibers, Yarn Intermediates,
and Yarns
Standard Test Methods for Tire Cords, Tire Cord
Fabrics, and Industrial Filament Yarns Made from
Manufactured Organic-Base Fibers
Standard Test Method for Bond or Cohesive Strength of
Sheet Plastics and Electrical Insulating Materials
Standard Specification for Raw Castor Oil
Standard Test Method for Pour Point of Petroleum
Products
Standard Test Method for Evaporation Loss of
Lubricating Greases and Oils
Standard Terminology of Packaging and Distribution
Environments
Standard Specification for ASTM Thermometers
Standard Specification for ASTM Hydrometers
Standard Practice for Determining Electrical
Conductivity Using the Electromagnetic (Eddy-Current)
Method
Standard Guide for Documentation of Clinical
Laboratory Computer Systems0
Standard Specification for Wire Cloth and Sieves for
Testing Purposes
Standard Test Method for Evaluation of Surgical Hand
E 1181
E 1374
E 1044
E 1058
E 1096
E 1102
E 1106
E 1111
E 1139
E 1164
E 1211
E 1213
E 1221
E 1222
E 1235
E 1634
E 1705
E 1733
E 1750
E 1246
E 1256
E 1292
E 1299
Scrub Formulations
Standard Test Methods for Characterizing Duplex Grain
Sizes
Standard Guide for Open Office Acoustics and
Applicable ASTM Standards
Standard Specification for Glass Serological Pipets
(General Purpose and Kahn)
Standard Practice for the Toxic Contamination of the
Environment in the Operator Enclosure of SelfPropelled Agriculture Vehicles
Standard Specification for Laboratory Glass Separatory
Funnels
Standard Terminology Relating to Agricultural
Chemical Application
Standard Method for Primary Calibration of Acoustic
Emission Sensors
Standard Test Method for Measuring the Interzone
Attenuation of Ceiling Systems
Standard Practice for Continuous Monitoring of
Acoustic Emission from Metal Pressure Boundaries
Standard Practice for Obtaining Spectrometric Data for
Object-Color Evaluation
Standard Practice for Leak Detection and Location
Using Surface-Mounted Acoustic Emission Sensors
Standard Test Method for Minimum Resolvable
Temperature Difference for Thermal Imaging Systems
Standard Test Method for Determining Plane-Strain
Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
Standard Test Method for Laboratory Measurement of
the Insertion Loss of Pipe Lagging Systems
Standard Test Method for Gravimetric Determination of
Nonvolatile Residue (NVR) in Environmentally
Controlled Areas for Spacecraft
Standard Guide for Performing Sputter Crater Depth
Measurements
Standard Terminology Relating to Biotechnology
Standard Guide for Use of Lighting in Laboratory
Testing
Standard Guide for Use of Water Triple Point Cells
Standard Practice for Reporting Reliability of Clinical
Laboratory Information Systems
Standard Test Methods for Radiation Thermometers
(Single Waveband Type)
Standard Specification for Gravity Convection and
Forced Ventilation Incubators
Standard Specification for Reusable Phase-Change-Type
E 1304
E 1333
E 1337
E 1350
E 1354
E 1359
E 1370
E 1375
E 144
E 1537
E 1580
E 1633
E 1376
E 1384
E 1387
E 1419
E 145
E 1454
E 1468
Fever Thermometer for Intermittent Determination of
Human Temperature
Standard Test Method for Plane-Strain (Chevron-Notch)
Fracture Toughness of Metallic Materials
Standard Test Method for Determining Formaldehyde
Concentrations in Air and Emission Rates from Wood
Products Using a Large Chamber
Standard Test Method for Determining Longitudinal
Peak Braking Coefficient of Paved Surfaces Using a
Standard Reference Test Tire
Standard Guide for Testing Sheathed Thermocouples
Prior to, During, and After Installation
Standard Test Method for Heat and Visible Smoke
Release Rates for Materials and Products Using an
Oxygen Consumption Calorimeter
Standard Guide for Evaluating Capabilities of
Nondestructive Testing Agencies
Standard Guide for Air Sampling Strategies for Worker
and Workplace Protection
Standard Test Method for Measuring the Interzone
Attenuation of Furniture Panels Used as Acoustical
Barriers
Standard Practice for Safe Use Of Oxygen Combustion
Bombs
Standard Test Method for Fire Testing of Upholstered
Furniture
Standard Guide for Surveillance of Accredited
Laboratories
Standard Specification for Coded Values Used in the
Electronic Health Record
Standard Test Method for Measuring the Interzone
Attenuation of Sound Reflected by Wall Finishes and
Furniture Panels
Standard Guide for Content and Structure of the
Electronic Health Record (EHR)
Standard Test Method for Ignitable Liquid Residues in
Extracts from Fire Debris Samples by Gas
Chromatography
Standard Test Method for Examination of Seamless,
Gas-Filled, Pressure Vessels Using Acoustic Emission
Standard Specification for Gravity-Convection And
Forced-Ventilation Ovens
Standard Guide for Data Fields for Computerized
Transfer of Digital Ultrasonic Examination Data
Standard Practice for Collecting Benthic
Macroinvertebrates with the Basket Sampler
E 1469
E 147
E 1475
E 1557
E 1560
E 1573
E 176
E 178
E 1822
E 213
E 1600
E 1616
E 1618
E 162
E 1623
E 1696
E 1704
E 1786
E 1792
E 1805
E 1816
Standard Practice for Collecting Benthic
Macroinvertebrates with Multiple-Plate Samplers
Standard Specification for Apparatus For
Microdetermination Of Nitrogen By Kjeldahl Method
Standard Guide for Data Fields for Computerized
Transfer of Digital Radiological Examination Data
Standard Classification for Building Elements and
Related Sitework - UNIFORMAT II
Standard Test Method for Gravimetric Determination of
Nonvolatile Residue From Cleanroom Wipers
Standard Test Method for Evaluating Masking Sound in
Open Offices Using A-Weighted and One-Third Octave
Band Sound Pressure Levels
Standard Terminology of Fire Standards
Standard Practice for Dealing With Outlying
Observations
Standard Test Method for Fire Testing of Stacked Chairs
Standard Practice for Ultrasonic Examination of Metal
Pipe and Tubing
Standard Test Method for Determination of Gold in
Cyanide Solutions by Atomic Absorption Spectrometry
Standard Test Method for Analysis of Acetic Anhydride
Using Gas Chromatography
Standard Test Method for Ignitable Liquid Residues in
Extracts from Fire Debris Samples by Gas
Chromatography-Mass Spectrometry
Standard Test Method for Surface Flammability of
Materials Using a Radiant Heat Energy Source
Standard Test Method for Determination of Fire and
Thermal Parameters of Materials, Products, and Systems
Using an Intermediate Scale Calorimeter (ICAL)
Standard Test Method for Field Measurement of Raised
Retroreflective Pavement Markers Using a Portable
Retroreflectometer
Standard Guide for Specifying Acoustical Performance
of Sound-Isolating Enclosures
Standard Test Method for Determination of Low Levels
of Water in Liquid Chlorine by On-Line Infrared
Spectrophotometry
Standard Specification for Wipe Sampling Materials for
Lead in Surface Dust
Standard Test Method for Fire Assay Determination of
Gold in Copper Concentrates by Gravimetry
Standard Practice for Ultrasonic Examinations Using
Electromagnetic Acoustic Transducer (EMAT)
Techniques
E 1828
E 1860
E 1932
E 1951
E 1834
E 1835
E 1838
E 1864
E 1898
E 1902
E 1921
E 1949
E 23
E 238
E 248
E 253
E 284
E 382
E 438
Standard Practice for Evaluating the Performance
Characteristics of Qualitative Chemical Spot Test Kits
for Lead in Paint
Standard Test Method for Elapsed Time Calibration of
Thermal Analyzers
Standard Guide for Acoustic Emission Examination of
Small Parts
Standard Guide for Calibrating Reticles and Light
Microscope Magnifications
Standard Test Method for Determination of Lead in
Nickel Alloys by Electrothermal Atomic Absorption
Spectrometric Method
Standard Test Method for Analysis of Nickel Alloys by
Flame Atomic Absorption Spectrometry
Standard Test Method for Determining the VirusEliminating Effectiveness of Liquid Hygienic Handwash
and Handrub Agents Using the Fingerpads of Adult
Volunteers
Standard Practice for Evaluating Quality Systems of
Organizations Conducting Facility and Hazard
Assessments for Lead in Paint, Dust, Airborne
Particulate, and Soi
Standard Test Method for Determination of Silver in
Copper Concentrates by Flame Atomic Absorption
Spectrometry
Standard Specification for Management of the
Confidentiality and Security of Dictation, Transcription,
and Transcribed Health Records
Standard Test Method for Determination of Reference
Temperature, To, for Ferritic Steels in the Transition
Range
Standard Test Method for Ambient Temperature Fatigue
Life of Metallic Bonded Resistance Strain Gages
Standard Test Methods for Notched Bar Impact Testing
of Metallic Materials
Standard Test Method for Pin-Type Bearing Test of
Metallic Materials
Standard Test Method for Determination of Manganese
in Manganese Ores by Pyrophosphate Complexed
Permanganate Potentiometric Titrimetry
Standard Terminology Relating to Sensory Evaluation
of Materials and Products
Standard Terminology of Appearance
Standard Test Method for Determination of Crushing
Strength of Iron Ore Pellets
Standard Specification for Glasses in Laboratory
E 265
E 285
E 29
E 307
E 312
E 329
E 341
E 377
E 395
E 400
E 408
E 423
E 434
E 458
E 542
E 732
E 457
E 466
E 471
E 511
Apparatus
Standard Test Method for Measuring Reaction Rates and
Fast-Neutron Fluences by Radioactivation of Sulfur-32
Standard Test Method for Oxyacetylene Ablation
Testing of Thermal Insulation Materials
Standard Practice for Using Significant Digits in Test
Data to Determine Conformance with Specifications
Standard Test Method for Normal Spectral Emittance at
Elevated Temperatures
Standard Practice for Description and Selection of
Conditions for Photographing Specimens
Standard Specification for Agencies Engaged in the
Testing and/or Inspection of Materials Used in
Construction
Standard Practice for Measuring Plasma Arc Gas
Enthalpy by Energy Balance
Standard Practice for Internal Temperature
Measurements in Low-Conductivity Materials
Standard Test Method for Determination of Total Sulfur
in Iron Ores and Related Materials by CombustionIodate Titration
Standard Test Method for Analysis of Ores, Minerals,
and Rocks by Fire Assay Preconcentration Atomic
Emission Spectrometry
Standard Test Methods for Total Normal Emittance of
Surfaces Using Inspection-Meter Techniques
Standard Test Method for Normal Spectral Emittance at
Elevated Temperatures of Nonconducting Specimens
Standard Test Method for Calorimetric Determination of
Hemispherical Emittance and the Ratio of Solar
Absorptance to Hemispherical Emittance Using
Standard Test Method for Heat of Ablation
Standard Practice for Calibration of Laboratory
Volumetric Apparatus
Standard Specification for Disposable Pasteur-Type
Pipet
Standard Test Method for Measuring Heat-Transfer Rate
Using a Thermal Capacitance (Slug) Calorimeter
Standard Practice for Conducting Force Controlled
Constant Amplitude Axial Fatigue Tests of Metallic
Materials
Standard Test Method for Obtaining Char Density
Profile of Ablative Materials by Machining and
Weighing
Standard Test Method for Measuring Heat Flux Using a
Copper-Constantan Circular Foil, Heat-Flux Transducer
E 523
E 541
E 562
E 569
E 580
E 585/E 585M
E 596
E 598
E6
E 609
E 645
E 672
E 604
E 639
E 650
E 681
E 69
E 698
E 715
E 723
E 785
Standard Test Method for Measuring Fast-Neutron
Reaction Rates by Radioactivation of Copper
Standard Specification for Agencies Engaged in System
Analysis and Compliance Assurance for Manufactured
Building
Standard Test Method for Determining Volume Fraction
by Systematic Manual Point Count
Standard Practice for Acoustic Emission Monitoring of
Structures During Controlled Stimulation
Standard Practice for Application of Ceiling Suspension
Systems for Acoustical Tile and Lay-in Panels in Areas
Requiring Seismic Restraint
Standard Specification for Compacted MineralInsulated, Metal-Sheathed, Base Metal Thermocouple
Cable
Standard Test Method for Laboratory Measurement of
Noise Reduction of Sound-Isolating Enclosures
Standard Test Method for Measuring Extreme HeatTransfer Rates from High-Energy Environments Using a
Transient, Null-Point Calorimeter
Standard Terminology Relating to Methods of
Mechanical Testing
Standard Terminology Relating to Pesticides
Standard Test Method for Efficacy of Microbicides
Used in Cooling Systems
Standard Specification for Disposable Glass Micropipets
Standard Test Method for Dynamic Tear Testing of
Metallic Materials
Standard Test Method for Measuring Total-Radiance
Temperature of Heated Surfaces Using a Radiation
Pyrometer
Standard Guide for Mounting Piezoelectric Acoustic
Emission Sensors
Standard Test Method for Concentration Limits of
Flammability of Chemicals (Vapors and Gases)
Standard Test Method for Combustible Properties of
Treated Wood by the Fire-Tube Apparatus
Standard Test Method for Arrhenius Kinetic Constants
for Thermally Unstable Materials
Standard Specification for Gravity-Convection And
Forced-Circulation Water Baths
Standard Test Method for Efficacy of Antimicrobials as
Preservatives for Aqueous-Based Products Used in the
Paper Industry (Bacterial Spoilage)
Standard Specification for Crucibles, Ignition,
Laboratory, Metal
E 786
E 787
E 792
E8
E 803
E 814
E 833
E 8M
F 1052
E 809
E 850
E 915
E 925
E 945
E 947
E 95
E 966
E 972
E 988
F 1005
F 1007
F 1021
Standard Specification for Dishes, Evaporating,
Platinum
Standard Specification for Disposable Glass Micro
Blood Collection Pipets
Standard Guide for Selection of a Clinical Laboratory
Information Management System
Standard Test Methods for Tension Testing of Metallic
Materials
Standard Test Method for Determining the L/D Ratio of
Neutron Radiography Beams
Standard Test Method for Fire Tests of ThroughPenetration Fire Stops
Standard Terminology of Building Economics
Standard Test Methods for Tension Testing of Metallic
Materials [Metric]
Standard Test Method for Pressure Testing Vapor
Protective Ensembles
Standard Practice for Measuring Photometric
Characteristics of Retroreflectors
Standard Practice for Use of Inorganic Process Wastes
as Structural Fill
Standard Test Method for Verifying the Alignment of
X-Ray Diffraction Instrumentation for Residual Stress
Measurement
Standard Practice for Monitoring the Calibration of
Ultraviolet-Visible Spectrophotometers whose Spectral
Slit Width does not Exceed 2 nm
Standard Test Method for Determination of Zinc in Zinc
Ores and Concentrates by Complexometric Titrimetry
Standard Specification for Sampling Single-Phase
Geothermal Liquid or Steam for Purposes of Chemical
Analysis
Standard Specification for Cell-Type Oven With
Controlled Rates of Ventilation
Standard Guide for Field Measurements of Airborne
Sound Insulation of Building Facades and Facade
Elements
Standard Test Method for Solar Photometric
Transmittance of Sheet Materials Using Sunlight
Standard Temperature-Electromotive Force (EMF)
Tables for Tungsten-Rhenium Thermocouples
Standard Practice for HVAC Duct Shapes; Identification
and Description of Design Configuration
Standard Specification for Pipeline Expansion Joints of
the Packed Slip Type for Marine Application
Standard Specification for Feeders, Detergent, Rinse
F 1074
F 1273
F 1027
F 1047
F 1058
F 1077
F 1080
F 1086
F 1091
F 1104
F 1108
F 1111
F 1134
F 1135
F 1159
F 1198
F 1264
F 1136
F 1137
F 1163
F 1183
Agent, and Sanitizing Agent for Commercial
Dishwashing and Glasswashing Machi
Standard Specification for Cleats, Welded Horn Type
Standard Specification for Tank Vent Flame Arresters
Standard Practice for Assessment of Tissue and Cell
Compatibility of Orofacial Prosthetic Materials and
Devices
Standard Specification for Frying and Braising Pans,
Tilting Type
Standard Specification for Wrought 40Cobalt20Chromium-16Iron-15Nickel-7Molybdenum Alloy
Wire and Strip for Surgical Implant Applications (UNS
R30003 and UNS R3000
Selection of Committee F-16 Fastener Specifications
Standard Test Method for Determining the Consistency
of Viscous Liquids Using a Consistometer
Standard Guide for Structures and Responsibilities of
Emergency Medical Services Systems Organizations
Standard Specification for Wrought Cobalt20Chromium-15Tungsten-10Nickel Alloy Surgical
Fixation Wire [UNS R30605]
Standard Test Method for Preparing Aircraft Cleaning
Compounds, Liquid Type, Water Base, for Storage
Stability Testing
Standard Specification for Titanium-6Aluminum4Vanadium Alloy Castings for Surgical Implants (UNS
R56406)
Standard Test Method for Corrosion of Low-Embrittling
Cadmium Plate by Aircraft Maintenance Chemicals
Standard Specification for Insulation Resistance
Monitor for Shipboard Electrical Motors and Generators
Specification for Cadmium or Zinc Chromate Organic
Corrosion Protective Coating for Fasteners
Standard Practice for Design and Manufacture of
Amusement Rides and Devices
Standard Guide for Shipboard Fire Detection Systems
Standard Specification and Test Methods for
Intramedullary Fixation Devices
Chromium/Zinc Corrosion Protective Coatings for
Fasteners
Standard Specification for Phosphate/Oil and
Phosphate/Organic Corrosion Protective Coatings for
Fasteners
Standard Specification for Protective Headgear Used in
Horse Sports and Horseback Riding
Standard Specification for Aluminum Alloy Chain Link
F 1207M
F 1208
F 1212
F 1223
F 1252
F 1255
F 1281
F 1282
F 1295
F 1336
F 1491
F 1555
F 1305
F 1307
F 1314
F 1316
F 1326
F 1331
F 1333
F 1334
Fence Fabric
Standard Specification for Electrical Insulation Monitors
for Monitoring Ground Resistance in Active Electrical
Systems [Metric]
Standard Specification for Minimum Performance and
Safety Requirements for Anesthesia Breathing Systems
Standard Test Method for Thermal Stability Testing of
Gallium Arsenide Wafers
Standard Test Method for Determination of Total Knee
Replacement Constraint
Standard Test Method for Measuring Optical
Reflectivity of Transparent Materials
Standard Practice for Performance of Prehospital
Automated Defibrillation
Standard Specification for Crosslinked
Polyethylene/Aluminum/Crosslinked Polyethylene
(PEX-AL-PEX) Pressure Pipe
Standard Specification for
Polyethylene/Aluminum/Polyethylene (PE-AL-PE)
Composite Pressure Pipe
Standard Specification for Wrought Titanium-6
Aluminum-7 Niobium Alloy for Surgical Implant
Applications [UNS R56700]
Standard Specification for Poly(Vinyl Chloride) (PVC)
Gasketed Sewer Fittings
Standard Specification for An Avalanche Beacon
Frequency
Standard Guide for Characteristics for Extremity Splints
Standard Guide for Classification of Amusement Ride
and Device Related Injuries and Illnesses
Standard Test Method for Oxygen Transmission Rate
Through Dry Packages Using a Coulometric Sensor
Standard Specification for Wrought Nitrogen
Strengthened 22 Chromium - 13 Nickel - 5 Manganese 2.5 Molybdenum Stainless Steel Alloy Bar and Wire f
Standard Test Method for Measuring the Transmissivity
of Transparent Parts
Standard Test Method for Measuring Maximum Dry
Volume of Utility Vacuum Cleaners
Standard Practice for Installation Procedures of Vinyl
Deck Coverings on Portable Plates in Electrical and
Electronic Spaces
Standard Specification for Construction of Fire and
Foam Station Cabinets
Standard Test Method for Determining A-Weighted
Sound Power Level of Vacuum Cleaners
F 1338
F 1343
F 1350
F 137
F 1424
F 1575
F 1577
F 1428
F 1446
F 1452
F 1456
F 1469
F 1470
F 1481
F 1487
F 1503
F 1506
F 1517
F 1592
F 1765
F 1766
Standard Guide for Main Propulsion Medium Speed
Marine Diesel Engines Covering Performance and
Minimum Scope of Assembly
Standard Specification for Anesthetic Gas Scavenging
Systems - Transfer and Receiving Systems
Standard Specification for Wrought 18Chromium14Nickel-2.5Molybdenum Stainless Steel Surgical
Fixation Wire (UNS S31673)
Standard Test Method for Flexibility of Resilient
Flooring Materials with Cylindrical Mandrel Apparatus
Standard Test Method for Estimating Toner Usage in
Full-Color Copiers Utilizing Dry Mono-or-DualComponent Toners
Standard Test Method for Determining Bending Yield
Moment of Nails
Standard Test Methods for Detention Locks for
Swinging Doors
Aluminum Particle-Filled Base/Organic or Inorganic
Topcoat, Corrosion Protective Coatings for Fasteners
Standard Test Methods for Equipment and Procedures
Used in Evaluating the Performance Characteristics of
Protective Headgear
Standard Specification for Minimum Performance and
Safety Requirements for Anesthetic Gas Monitors
Standard Specification for Minimum Performance and
Safety Requirements for Capnometers
Conducting a Repeatability and Reproducibility Study
on Test Equipment for Nondestructive Testing
Standard Guide for Fastener Sampling for Specified
Mechanical Properties and Performance Inspection
Standard Guide for Ecological Considerations for the
Use of Bioremediation in Oil Spill Response - Sand and
Gravel Beaches
Standard Consumer Safety Performance Specification
for Playground Equipment for Public Use
Machine/Process Potential Study Procedure
Standard Performance Specification for Flame Resistant
Textile Materials for Wearing Apparel for Use by
Electrical Workers Exposed to Momentary Electric Arc
and R
Standard Guide for Scope of Performance of Emergency
Medical Services Ambulance Operations
Standard Test Methods for Detention Hollow Metal
Vision Systems
Standard Guide for Ice Staff Self-Rescue Technique
Standard Guide for Ice Awls Self-Rescue Technique
F 1541
F 1552
F 1554
F 1556
F 1557
F 1558
F 1559
F 1573
F 1579
F 1580
F 1586
F 1597
F 1604
F 1646
F 1667
F 1601
F 1602
F 1603
F 1616
F 1629
Standard Specification and Test Methods for External
Skeletal Fixation Devices
Standard Practice for Training Instructor Qualification
and Certification Eligibility of Emergency Medical
Dispatchers
Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
Standard Guide for Spinal Immobilization and
Extrication (SPINE) Device Characteristics
Standard Guide for Full Body Spinal Immobilization
Devices (FBSID) Characteristics
Standard Guide for Characteristics for Adjunct Cervical
Spine Immobilization Devices (ACSID)
Standard Guide for Characteristics for Cervical Spine
Immobilization Collar(s) (CSIC)
Standard Specification for Anesthetic Equipment Oropharyngeal and Nasopharyngeal Airways
Standard Specification for Polyaryletherketone (PAEK)
Polymers for Surgical Implant Applications
Standard Specification for Titanium and Titanium-6
Aluminum-4 Vanadium Alloy Powders for Coatings of
Surgical Implants
Standard Specification for Wrought Nitrogen
Strengthened 21 Chromium - 10 Nickel - 3 Manganese 2.5 Molybdenum Stainless Steel Alloy Bar for Surgic
Standard Test Method for Determining the Actuation
Force and Contact Force of a Membrane Switch
Standard Specification for Freezers, Ice Cream, Soft
Serve, Shake
Standard Terminology Relating to Safety and Traction
for Footwear
Standard Specification for Driven Fasteners: Nails,
Spikes, and Staples
Standard Test Method for Motor Life Evaluation of an
Electric Motorized Nozzle for Central Vacuum Cleaning
Systems
Standard Specification for Kettles, Steam-Jacketed, 20
to 200 gal (75.7 to 757 L), Floor or Wall Mounted,
Direct Connected, Gas Fi
Standard Specification for Kettles, Steam-Jacketed, 32
oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted,
Direct Connected, Gas F
Standard Guide for Scope of Performance of First
Responders Who Practice in the Wilderness or Delayed
or Prolonged T
Standard Guide for Establishing Operating Emergency
Medical Services and Management Information
F 1632
F 1640
F 1643
F 1652
F 1653
F 1654
F 1655
Systems, or Both
Standard Test Method for Particle Size Analysis and
Sand Shape Grading of Golf Course Putting Green and
Sports Field Rootzone Mixes
Standard Guide for Packaging Materials for Foods to Be
Irradiated
Standard Test Methods for Detention Sliding Door
Locking Device Assembly
Standard Guide for Providing Essential Data Needed in
Advance for Prehospital Emergency Medical Services
Standard Guide for Scope of Performance of Triage in a
Prehospital Environment
Standard Guide for Training and Evaluation of
Individuals Who are Responsible for or Perform Triage
in a Prehospital
Standard Guide for Training First Responders Who
Practice in Wilderness, Delayed, or Prolonged Transport
Settings